CANNABIS HEMP EQUIPMENT MULTILOCATION CONSIGNMENT AUCTION Powered by A2C

DETROIT DIESEL 1500DS4 STANDBY (1360 KW PRIME) DIESEL GENERATOR SET S/N:0646808. SPECS & FEATURES: -DETROIT DIESEL/MTU 12V4000 ENGINE RATED 2200 HP AT 1800 RPM, SN-5262000301. 3/60/2400/4160V. -UL LISTED SUB-BASE FUEL TANK. -295 LOADED HRS. -OVERALL DIMENSIONS W X L X H, LBS. LOT INCLUDES: -MAIN-LINE CIRCUIT BREAKER. PMG - PERMANENT MAGNET GENERATOR. -DECISION-MAKER 550 DIGITAL CONTROL PANEL. -BATTERY CHARGER. -COOLANT HEATER. -SOUND ATTENUATED ENCLOSURE.

CB MILLS RHS-30 SOLVENT RECOVERY SYSTEM. HIGH VOLUME/ LOW WASTE SOLVENT RECOVERY SYSTEM. SPECS & FEATURES: -CAPACITY: 15-35 GALLONS PER HOUR -SYSTEMS DISTILL VIRTUALLY ANY SOLVENT: (ETHANOL DISTILLATION @ 37GPH) -304 STAINLESS STEEL POLISHED INTERIOR (STAINLESS AGITATOR WITH PTFE (TEFLON SCRAPER BLADES) -PLC CONTROLS INSURE THAT OPERATING SET POINTS ARE CONSISTENT. -THERMAL OIL IS CIRCULATED FOR EFFICIENT TEMPERATURE RANGE BETWEEN 100 TO 550 DEGREES F. -DISTILLATION VESSEL IS DESIGNED TO ELIMINATE CARRY-OVER. -VACUUM OPERATION REDUCES ENERGY CONSUMPTION BY REQUIRING LESS HEAT -ENTIRE SYSTEM IS INTRINSICALLY SAFE EXPLOSION RATED C1D1 -SYSTEM CAN AUTO FILL AND CYCLE. MANUAL KNIFE GATE DUMP. LOT INCLUDES: -HEATED CONTROL CABINET FOR OUTDOOR INSTALLATION IN COLD CIMATES. -EXTERNAL CHILLER USED TO COOL EACH CYCLE AFTER DISTILLATION. -INCLUDES 10 TON CHILLER SUPPLIED WITH SYSTEM -IINCLUDES CHILLING FLUIDS.

IES ISOLATE EXTRACTION SYSTEMS CDMH.5-2X-2F SUPERCRITICAL CO2 EXTRACTOR. SPECS & FEATURES: -PROCESSES WITH A FLOW RATE OF 1.5KG/MINUTE -100% AUTOMATED -LOAD CAPACITY OF 5LBS -SYSTEM HAS TWO 5 LITER SOLVENT CHAMBERS -SYSTEM USES DOUBLE FRACTION EXPANSION CHAMBERS -PRODUCES A FULL SPECTRUM OIL AND/OR TERPENES THAT IS FREE OF ANY SOLVENT -10 TOTAL L OF CAPACITY LOT INCLUDES: -MAIN EXTRACTOR APPARATUS -10,000 W THERMOFISCHER CHILLER -FOOD GRADE 5 GALLON HYDRAULIC POWER UNIT -INCLUDES ADDITIONAL CO2 TANK PRESSURE VALVE SYSTEM -INCLUDES SPARE PARTS: O-RINGS, GASKETS, ETC

REM TECHNOLOGIES D970L THC REMEDIATION SYSTEM. SOFTWARE DRIVEN THC REMEDIATION SYSTEM. THIS SYSTEM IS CAPABLE OF LARGE THROUGHPUT, WITH MINIMAL CONSUMABLE COST, AND LOW OPERATING COST. EQUIPMENT COMES WITH THE ENTIRE TURNKEY SETUP TO BE ABLE TO PERFORM THC REMEDIATION. SPECS & FEATURES: IDEAL INPUT MATERIAL WINTERIZED & DECARBED CRUDE. IDEAL CANNABINOID POTENCY: HIGH 60S HIGH 70S. IDEAL THC RANGES UNDER 7%. SWEET SPOT 1-3%. MIN. LOAD CAPACITY: 40 LITERS. MAX LOAD CAPACITY: 70 LITERS. BENEFITS MINORS CAN STAY INTACT. FAST RUNTIME PER BATCH, NORMALLY 12 24 HOURS. NO SOLVENTS USED. OPERATIONAL EXPERTISE CAN BE ENTRY LEVEL EMPLOYEES. CAN MAINTAIN WHOLE PLANT PHILOSOPHY IF DESIRED. POWER REQUIREMENTS 240 VOLTS 30 AMP CIRCUIT NEMA L14-30R SINGLE PHASE. ULTRA RELIABLE WIFI & OR ETHERNET REQUIRED ONSITE 24/7. -ORIGINAL MANUFACTURER IS AVAILABLE TO DO A SETUP AT YOUR FACILITY ALONG WITH A DAY OF TRAINING FOR $1,500 UPON REQUEST.

PINNACLE 40C ETHANOL SYSTEM W/ ICS SKID, CHILLER, AND BATH CIRCULATOR. INCLUDES ICS SKID, G & D CHILLER MODEL 14, AND HUBER REFRIGERATED/BATH CIRCULATOR MODEL CC-902. CLOSED LOOP SYSTEM DESIGNED FOR SAFETY SPECS & FEATURES: -INITIAL COOL-DOWN: 2 HOURS -CONTINUOUS -40C AT 60 GAL/HR -REDUCES OVERALL ETHANOL USAGE -AUTOMATED FILLING, CHILLING, AND DISCHARGE TO EXTRACTION SKID -SUPPORTS AES SYSTEM TO IN-LINE CHILLING -C1D2 RATED, THIRD PARTY ENGINEER PEER REVIEWED, GMP COMPLIANT -SEE PICTURES FOR SPECS ON G & D CHILLER & HUBER CC-902 LOT INCLUDES: -INCLUDES ICS SKID, G7 D CHILLER MODEL 14, AND HUBER REFIRGERATION/BATH CIRCULATOR MODEL CC-902 -200 GALLON INSULATED CLEAN SOLVENT STORAGE -90 GALLON JACKETED AND INSULATED SOLUTION HOLDING TANK -PNEUMATIC CONTROL VALVES -LIQUID LEVEL SENSOR -TEMPERATURE MONITORING CONTROLS -PINNACLE STAINLESS CUSTOM HEAT EXCHANGER -LIQUID DRIVE PUMP WITH CUSTOM SEALS

EDEN LABS HIFLO FX2 20L2K SUPERCRITICAL FLUID EXTRACTOR W/COMPRESSOR & CHILLER. SPECS & FEATURES: -LOAD CAPACITY: 410 LBS -RUN TIME: 7 TO 10 HRS -COMPLETELY REFURBISHED -FLOW RATE: 2.2 LITERS PER MINUTE -TEMPERATURE RANGE: -60 DEGREES C TO 60 DEGREES C -YIELDS ARE 12 TO 25%, DEPENDING ON MATERIAL -FLOOR AREA (INCHES) 568" X 48" X 107" -WEIGHT: 2,200 LBS -ALL THE WATER & AIR LINES WERE REMOVED LOT INCLUDES: -MAIN FX2 EXTRACTION UNIT -10 HP CHICAGO PNEUMATIC AIR COMPRESSOR -MTI CHILLER -(2) WATER BATHS

CUSTOM BUILT BY LAB 1ST INLINE CRYOGENIC ETHANOL EXTRACTION LINE. COMPLETE INLINE CRYOGENIC ETHANOL EXTRACTION.-60C CENTRIFUGE EXTRACTION CUSTOM BUILT BY LAB 1ST. EQUIPMENT IS BRAND NEW AND HAS ONLY BEEN RAN FOR TESTING. *SEE DIAGRAM FOR ENTIRE LINE SET UP* -SYSTEM CAN PROCESS 45LBS PER HOUR -EXTREMELY EFFICIENT EXTRACTION PROCESS WITH 99% ALCOHOL RECOVERY. DESCRIPTION OF SET UP: CRYO ETHANAL MODUL FOR MAKING COLD ETHANOL FOR EXTRACTION: INCLUDES: - (1) 120L INSULATED & JACKETED STORAGE TANK, SANITARY MODEL JBC-120L - (1) 250L NON-JACKETED & INSULATED STORAGE TANK, SANITARY. MODEL BC-250L - (2) PNEUMATIC DIAPHRAGM TRANSFER PUMP MODEL PDP-3-40. 40 GALLONS/MI. MAX FLOW RATE, 8.4 BAR MAX WORKING PRESSURE. - (1) INDUSTRIAL CRYO CHILLER MODEL DLH-80-300L, CAPABLE OF COOLING 100L ALCOHOL TO -40C WITHIN 1 HOUR 1 ACCESSORIES (VALVES, TUBES, ETC) CENTRIFUGE EXTRACTION MODULE: FOR PROCESSING 38LBS BIOMASS PER HR INCLUDES: -(1) 450MM JACKETED AND INSULTED CENTRIFUGE MODEL LXJ-45. 15 LBS BIOMASS PER BATCH -(1) CRYO CHILLER MODEL DLH-80-50L. CONNECTED TO CENTRIFUGE JACKET -(1) PNEUMATIC DIAPHRAGM TRANSFER PUMP MODEL PDP-3-40, 40 GALLONS/MIN MAX FLOW RATE, 8.4 BAR MAX WORKING PRESSURE. -(1) 120L NON-JACKETED & INSULATED STORAGE TANK BC-120L, SANITARY, (5) FILTER BAG FOR CENTRIFUGE (LXJ-450) -(1) ACCESSORIES (VALVES, TUBES, ETC) FILTRATION MODULE: DUAL STAGE FILTER. PROCESSES 2 TONS PER HOUR W/ CONTINOUS OPERATION - (1) PNEUMATIC DIAPHRAGM TRANSFER PUMP MODEL PDP-3-40 , 40 GALLONS/MIN MAX FLOW RATE, 8.4 BAR MAX WORKING PRESSURE. - (1) SIDE-ENTRY BAG FILTER MODEL SBF1, 10UM PORE SIZE, NO.1 FILTER BAG (ID: 180MM, H: 430MM) -10UM 5 FILTER BAG NO.1 MODEL FB1A, 10UM PORE SIZE, PP MATERIAL -1 LENTICULAR FILTER MODEL LF2-16, 1UM PORE SIZE - 2 LENTICULAR FILTER CARTRIDGES MODEL LFC16A-1UM, 16 INCHES, 1UM PORE SIZE -1 ACCESSORIES (VALVES, TUBES, ETC) LARGE EVAPORATION MODULE: 100L FALLING FILM EVAP. 100L ETHANOL/HR: RECOVERY RATE IS 97.5% INCLUDES: - (1) 100L/HR FALLING FILM EVAPORATOR, WITHOUT FEEDING, DISCHARGING OR VACUUM PUMPS - (1) WATER/OIL HEATING CIRCULATOR MODEL UC-200-A30, 30KW, UP TO 200C - (1) INDUSTRIAL WATER CHILLER LSJ-12, 5C, 29.5KW CHILLING POWER - (1) INDUSTRIAL WATER JET VACUUM PUMP SYSTEM, 90 M3/HOUR GAS REPLACEMENT, 30 MBAR VACUUM - (1) FEED MODULE, PERISTALTIC PUMP WITH RELATED PIPES AND JOINTS - (2) 120L CUSTOMIZED STAINLESS STEEL TANK (KEG) - (2) 60L CUSTOMIZED STAINLESS STEEL TANK (KEG) - (1) DISCHARGE MODULE, PNEUMATIC DIAPHRAGM PUMP OR EXPLOSION-PROOF CENTRIFUGAL PUMP - (1) NON-JACKETED, 120L STAINLESS STORAGE TANK WITH WHEELS AND MAGNETIC TYPE LEVEL GAUGE - (1) ACCESSORIES (VALVES, TUBES, ETC) SPARE PARTS: -SPARE LENTICULAR FILTERS, BAG FILTERS, CLAMPS, VALVES, AND EXTRA HARDWARE. HAS 2 EXTRA COLLECTION TANKS THAT HOLD 30 GALLONS OF CRUDE.

PINNACLE AES (ALCOHOL EXTRACTION SKID) MODEL PS-041-20. SPECS & FEATURES: -BATCH STYLE EXTRACTION. -SKID USED TO EXTRACT BIOMASS AT 95-98% EFFICIENCY. -CLOSED LOOP SYSTEM. 1,700 LBS TO 2,000 LBS OF BIOMASS IN 12 HOURS OF PROCESSING. -20 AMP CIRCUIT OF 208/240/480V 3 PHASE. LOT INCLUDES: - (2) PINNACLE STAINLESS 100L DIMPLEJACKETED/CRYOGENIC INSULATED REACTORS - (1) PINNACLE STAINLESS CUSTOM PROCESS SKID W/ PHARMA CASTERS - (1) PINNACLE STAINLESS 200 GALLON CLEAN SUPPLY TANK - (1) PINNACLE STAINLESS 90 GALLON SATURATED HOLDING TANK - (1) COMPLETE SYSTEM GASKET & CLAMP ASSEMBLY - (2) LIQUID TRANSFER PUMPS CUSTOM TO PINNACLE SPECS - (2) #150 PUMP FLANGES W/ 1.5" TRI-CLAMPS - (2) C1D1 ELECTRIC MOTORS FOR TRANSFER PUMPS - (2) LOVEJOY COUPLING SETS - (1) SANITARY TRANSFER LINES - (1) CLEAN-ROOM INSULATION FOR TRANSFER LINES - (1) UL LISTED EXPLOSION PROOF CONTROL BOX - (1) SYSTEM OPERATING MANUAL

ENVIROSTAR ES 500 SPRAY DRYER. SOLUBLE POWDERS FOR THC & CBD PRODUCTS. SPECS & FEATURES: -YIELD: 2 KG PER HOUR -COLLECTION PROCESS: HIGH EFFICIENCY COLLECTION CYCLONE -FULLY AUTOMATED W/ 30 MIN START UP TIME -FILTER: INTEGRATED HEPA INLET FOR AIR FILTRATION -304 STAINLESS STEEL CONSTRUCTION -SMALL FOOTPRINT: FITS UNDER 9FT CEILING -COMPLETELY SELF-CONTAINED: NO ADDITIONAL EQUIPMENT REQUIRED FOR OPERATION -PLC & HMI CONTROLS BY ALLEN BRADLEY -FOOD SAFE DESIGN W/ BUILT IN PROCESS ALARMS -UL CERTIFIED -POWER REQUIREMENTS: 208V 3 PHASE

K2 KINETICS 6HF-SERSM 6 HEAD SERVO FILLING MACHINE W/ INFEED AND OUTFEED CONVEYORS, USE TANKS AND MIXERS. CAPABLE OF 50-60 BPM. ANTI-DRIP FILLING. INCLUDES: ACCUMULATION TABLE, K2 KINETICS AUTOMATED CAPPING CONVEYOR AND TIGHTENER, K2 KINETICS 6 HEAD GRAVITY FILLER MACHINE UP TO GALLON SIZES. MODEL 6HF-GRAGAL

AQUAVITA US BOTTLING 4000 BPH (2OZ) FULL-AUTO BLOW MOLDING SYSTEM FOR PET BOTTLES 2OZ 4OZ 8OZ. PRODUCT: PET BOTTLE. BOTTLE VOLUME: 2OZ, 4OZ, 8OZ CONTAINER: -MAX. CONTAINER VOLUME: 2 LITERS -MAX NECK DIAMETER: 50 MM -MAX CONTAINER DIAMETER: 110 MM -MAX CONTAINER HEIGHT: 320 MM MOULDING: -CLAMPING FORCE / CLAMPING STROKE: 22,000 KG / 125 MM -STRETCHING STROKE: 450 MM -BOTTOM STROKE: 40/70 -CAVITIES AND CAVITY SPACING: 4 CAVITIES W/ 120 MM SPACING -CARRIAGE UNIT: 124 PIECES ELETRICAL SYSTEM: -50 KW TOTAL POWER. HEATING POWER: 48 KW. HAS 8 LAMP LAYERS. AIR SYSTEM: -OPERATING PRESSURE: 7-9 KG/CM2 W/ BLOWING PRESSURE OF 20-30 KG/CM2. HIGH/LOW AIR PRESSURE CONSUMPTION: 3200/2000 -AIR FILTRATION: FESTO 3 IN 1. INCLUDES LOW PRESSURE OIL WATER SEPARATOR, LOW PRESSURE PRESS-REGULATING VALVE, AND LOW PRESSURE LUBRICATOR. -ALSO INCLUDES LOW PRESSURE SMC MUFFLER, HIGH PRESSURE USA ALWITCO MUFFLER, AND LOW PRESSURE OPERATING FESTO VALVE CHILLER: -TEMP RANGE: 10-12 DEGREES C -FLOW RATE: 250 LITERS PER MINUTE OPERATING PRESSURE: 2-4 KG/CM2 CONSUMPTION: 2000 KCAL.HR LOT INCLUDES: CYLINDERS CLAMPING CYLINDER SMC PREFORM-FEEDING FLIPPING CYLINDER SMC BOTTLE-TAKEOUT FLIPPING CYLINDER SMC FIRST-STAGE, SECOND-STAGE SLIDE CYLINDER SMC HEATING CYLINDER SMC PREFORM-SEPARATING CYLINDER SMC MANIPULATOR CYLINDER SMC BOTTLE DIE CYLINDER SMC VALVES HIGH PRESSURE BLOWING VALVE PARKER ELECTRICAL COMPONENTS PLC DELTA HMI DELTA RELAY SCHNEIDER CIRCUIT BREAKER SCHNEIDER AIR SWITCH SCHNEIDER START BUTTON SCHNEIDER TWO-POSITION SWITCH SCHNEIDER CYCLE BUTTON SCHNEIDER POWER SUPPLY SCHNEIDER

LAB SOCIETY ASRS - 110 GAL AUTOMATED SOLVENT RECOVERY SYSTEM. FOR INDUSTRIAL OR COMMERCIAL-SCALE PRODUCTION AND SOLVENT RECOVERY. SPECS & FEATURES: -110 GALLON UNIT -CAPABLE OF PROCESSING UP TO 18.2 GAL/HR -CAPABLE OF 400 GAL PER BATCH -ELECTRICAL: 46 AMPS LOT INCLUDES: -MAIN APPARATUS & CONTROL PANEL -ECONOCHILL CHILLER -INCLUDES HOSES & FITTINGS TO CONNECT MAIN APPARATUS TO CHILLER.

PINNACLE 100L SRS PINNACLE STAINLESS SOLVENT-RECOVERY SKID. SPECS & FEATURES: -100L PER HOUR OUTPUT OF ALCOHOL RECOVERY AUTOMATED CONTINUOUS FEED. -SANITARY STAINLESS TUBING - ENGINEER PEER-REVIEWED LOT INCLUDES: -DUAL-STAGE ADD-ON FOR S.R.S. PLATFORM S.R.S. DUAL-STAGE ADD-ON (DE-CARB/DEGAS/DE-VOL) -PINNACLE STAINLESS CUSTOM FRAME -PINNACLE STAINLESS HEAT-EXCHANGER SETUP -PINNACLE STAINLESS CONDENSER - STAND-ALONE VACUUM SYSTEM -DUAL DRIVE PUMPS + SWAGELOK FITTINGS

HUBER TECHNOLOGIES UNISTAT 905 REFRIGERATED HEATING CIRCULATOR W/DYNAMIC TEMPERATURE CONTROL SYSTEM. SPECS & FEATURES: -MAGNETIC COUPLED CIRCULATION PUMP MADE OF STAINLESS STEEL. -AUTOMATIC SWITCH-OVER AND CAPACITY ADAPTION FOR HEATING AND COOLING MACHINE. LOT INCLUDES: -PILOT ONE CONTROLS WHICH ALLOWS FOR PRECISE AND REPRODUCIBLE TEMPERATURE CONTROL RESULTS. TEMPERATURE RANGE OF -90 TO 250 DEGREES C. -INCLUDES TAC (TRUE ADAPTIVE CONTROL) - SELF OPTIMIZING INTERNAL AND CASCADE CONTROL, SELECTABLE TEMPERATURE CONTROL MODE (INTERNAL/PROCESS), PROGRAMMER WITH 10 PROGRAMS. -COPPER SOLDERED EVAPORATOR, MOISTENED PARTS AND HOUSING MADE OF STAINLESS STEEL. -INCLUDES (2) USB (HOST AND DEVICE), ETHERNET AND RS232 INTERFACES. E-GRADE PROFESSIONAL INSTALLED AS STANDARD.

MRX 20LE SUPERCRITICAL CO2 EXTRACTOR W/PLC CONTROL; (1) GRINDER; CME GRINDER/PELLTIZER FROM COLORADO MILL EQUIPMENT. MODEL ECO-10. 10 HP PELLET MILL; (1) DIMPLEX WVO-5001-M HEATING & CHILLING UNIT WITH 42,000 BTU/H COOLING CAPACITY & 34,150 BTU/H OF HEATING; (1)15HP QRS CP15 ROTARY SCREW AIR COMPRESSOR; NETBITER REMOTE ACCESS; DUST COLLECTOR/EXHAUST VACUUM; TOOL BAG

CAPNA SYSTEMS ETHOS 6 TSC209D CRYO-ETHANOL EXTRACTOR. TYPE-6 NON-VOLATILE EXTRACTOR. SPECS & FEATURES: -CAN EXTRACT UP TO 14 POUNDS OF PLANT MATERIAL PER HOUR. -3600G/40 MINUTE EXTRACTION THROUGHPUT -36 GALLON HOLDING CAPACITY. -CREATES WAX-FREE EXTRACTS WITH 98.6% EFFICIENCY RATE. -INCLUDES BUILT IN CERES DRYING CENTRIFUGE.

DELTA SEPARATIONS CUP 30 EXTRACTOR. CAPACITY: 25-30 LBS (11-13.6 KILOGRAMS). COMBINES CLOSED-LOOP, ALCOHOL EXTRACTION WITH MECHANICAL CENTRIFUGATION ENSURING A HIGH-PURITY EXTRACTION SPECS & FEATURES: -PRODUCTION CAPACITY: 25-30 POUNDS (11-13.6 KILOGRAMS) OF PLANT MATERIAL PER BATCH -APPROXIMATE 600 POUNDS (272 KILOGRAMS) PROCESSING PER 8 HOUR SHIFT. -AVGERAGE RUN TIME: 10 - 20 MINUTE. -LOW TEMPERATURE RATING TO -40 DEGREES C. -ALCOHOL REQUIREMENT: 25 - 30 GALLONS (95 - 113.5 LITERS) PER RUN -CAN TARGET SPECIFIC PLANT COMPOUNDS THROUGH PROGRAMMABLE SEQUENCES, EFFECTIVELY ISOLATING THE DESIRED SEPARATION. -DESIGNED FOR SINGLE OPERATOR. EASY MATERIAL LOADING / UNLOADING. -ALL WETTED PARTS ARE 304 AND 316L SANITARY STAINLESS STEEL. -VACUUM JACKETED INSULATION WITH ALCOHOL FEED PORT WITH 1.5" TRI-CLAMP FITTINGS, VAPOR TIGHT (NO PRESSURE) VESSEL WITH EPDM LID SEAL, 2" TRI-CLAMP ANGLED DRAIN. -ACCURATE CONTROL OVER BASKET RPM, CONTROLLED ALCOHOL RESIDENCE TIME, -CYCLE AGITATION STRENGTH, TEMPERATURES. LOT INCLUDES: -MAIN APPARATUS & CONTROL PANEL -LUBRICANT SKID -30 GAL AUXILIARY TANK - (40) EXTRA FILTER BAGS

YAMATO CSJ06L-3F0/CE3100 PRODUCT CHECKWEIGHERS W/ INFEED & OUTFEED BELTS. SPECS & FEATURES: -MAX SPEED: 480 WPM (6-116M/MIN) -MAX PRODUCT DIMENSIONS:L 200MM X W 160MMX H 180MM1 -PRODUCT FLOW: RIGHT TO LEFT -LOAD CELL WEIGHING SYSTEM -WEIGHING RANGE: L: 6-600G EVERY 0.05G -ELECTRICAL SPECS: AC 100 TO 240V +/-10% / 50/60HZ SINGLE PHASE; 350VA UL/CUL APPROVED LOT INCLUDES: -YAMATO CHECKWEIGHER -INFEED CONVEYOR: BW 160 MM X BL 440 MM -OUTFEED CONVEYOR: BW 160 MM X BL 240 MM -10.4 INCH COLOR TOUCH SCREEN (CE3100)

UNUSED/ STILL-IN-CRATE- NORTH STAR ENGINEERING PRODUCTS (NSEP) EXPLOSION PROOF ELECTRIC BASKET CENTRIFUGE, MODEL 755. SPECS & FEATURES: -100 POUND MAXIMUM DRY WEIGHT BASKET CAPACITY. -16" BASKET HEIGHT. 30" BASKET DIAMETER. 1740 RPM BASKET SPEED. -FLUID DRIVE, BELT DRIVEN, 480V, 5 HP -80 PSI OF AIR AT 1 CFM; 20-30 POUNDS PER SPIN. -ADJUSTABLE RUN TIMES UP TO 10 MINUTES. FUME PURGE SYSTEM. SKID MOUNTED WITH LEVELING PAD. UL 508A CONTROL. LOT INCLUDES: -MAIN APPPARATUS -OIL CONCENTRATION METER THAT INCLUDES: -EXPLOSION PROOF METER -WELDING & PIPEFITTING IN EXISTING SKID

YAMATO CSJ06L-3F0/CE3100 CHECKWEIGHERS W/ INFEED & OUTFEED BELTS. SPECS & FEATURES: -MAX SPEED: 480 WPM (6-116M/MIN) -MAX PRODUCT DIMENSIONS:L 200MM X W 160MMX H 180MM1 -PRODUCT FLOW: RIGHT TO LEFT -LOAD CELL WEIGHING SYSTEM -WEIGHING RANGE: L: 6-600G EVERY 0.05G -ELECTRICAL SPECS: AC 100 TO 240V +/-10% / 50/60HZ SINGLE PHASE; 350VA UL/CUL APPROVED LOT INCLUDES: -YAMATO CHECKWEIGHER -INFEED CONVEYOR: BW 160 MM X BL 440 MM -OUTFEED CONVEYOR: BW 160 MM X BL 240 MM -10.4 INCH COLOR TOUCH SCREEN (CE3100)

SUNTHAI LPG5 FALLING FILM EXTRACTOR ETHANOL DISTILLATION & RECOVERY SYSTEM. SPECS & FEATURES: -RECOVERY RATE OF 35-45 GALLONS PER HOUR. -JACKTED CONDENSER COLUMN. -INCLUDES (10) 5L COLLECTION POT. 50 LITER ETHANOL RECOVERY TANK. HEIGHT: 2.5 METERS. MOUNTED ON CASTERS.

PINNACLE HFS (HEATED FILTER SKID) FILTRATION SYSTEM. CLOSED LOOP SYSTEM DESIGNED FOR SAFETY FULLY AUTOMATED FILTRATION. MODEL HFS SPECS & FEATURES: -40GPM PINNACLE STAINLESS HEATED FILTER SKID. -HEATING PROCESS WARMS CANNABINOID WASH SOLUTION FROM -40C TO 20C -FILTERS PARTICULATE AT 1 MICRON -INCREASED RECOVERY EFFICIENCY -100% ENGINEERED & FABRICATED IN HOUSE -THIRD PARTY ENGINEER PEER REVIEWED -TOUCH SCREEN OPERATION -C1D2 RATED/ GMP COMPLIANT -UL LISTED HAZARDOUS LOCATION CONTROL PANEL -DUAL HOUSINGS FOR CONTINUOUS PROCESSING -SYSTEM DIMENSIONS: 60" X 50" X 69" UTILITY REQUIREMENTS:120V/2.5A, 85 PSI OF AIR AT 60 CFM, 300 LBS/HR STEAM LOT INCLUDES: -PINNACLE CUSTOM STAINLESS SKID -PINNACLE DUAL FILTER HOUSINGS FOR REDUCED DOWN TIME -DIAPHRAGM PUMP -PINNACLE CUSTOM HEAT EXCHANGER -50L JACKETED TANK

USED MARKEM 5800-2PH HIGH RES IMAGE 2 HEAD PRINT CARTON CODER. SPECS & FEATURES: -RELIABLE PRINTING AT SPEEDS UP TO 121 METERS/MINUTE (BARCODES). -MULTIPLE JETTING ORIENTATIONS; SINGLE SIDE, OPPOSITE SIDE, SIDE (UP TO 30 TILT ANGLE FOR INCLINED CONVEYORS), AND TOP PRINTING AND SMALLER OVERALL FOOTPRINT. -MARKEM-IMAJE OFFERS THE HIGHEST OPTICAL DENSITY INK TO ACHIEVE C-GRADE GS1-128 BARCODES -PRINT ON A WIDE RANGE OF SUBSTRATES AND IN ENVIRONMENTS RANGING FROM 0 TO 40 DEGREES C -IMPROVES PRODUCTIVITY BY ENABLING OPERATORS TO REPLENISH INK WITHOUT STOPPING THE PRODUCTION LINE -UNCOMPLICATED MENU STRUCTURE COMBINED WITH EASY TO NAVIGATE TOUCH SCREEN USER INTERFACE -AUTOPURGE TECHNOLOGY REDUCE OPERATOR MAINTENANCE.

MARKEM 9450 BOTTLE CODER. SMART CONSUMABLE SYSTEM. UP TO 5 LINES OF PRINT. UP TO 6.6 M/S. NO SET-UP REQUIRED. PROMOTIONAL CODING AND SERIALIZATION FUNCTIONS TO SUPPORT YOUR MARKETING INITIATIVES SPECS & FEATURES: -UP TO 5 LINES OF PRINT. -PRINT SPEED UP TO 6.6 M/S. -99.9% AVAILABILITY RATE -UP TO 20% REDUCTION IN CONSUMABLE USE AND ENERGY CONSUMPTION (NO NEED FOR PLANT AIR) -AUTOMATIC CLEANING SYSTEM WILL ENSURE JET STABILITY REMAINS PERFECT WHEN RESTARTING -WORKS W/ ADVANCED SPECIALTY INKS WITH A HIGH LEVEL OF ADHESION, CONTRAST, THERMOCHROMIC AND COLOR WHERE NEEDED AS WELL AS ANTI-COUNTERFEITING SOLUTIONS AND ENVIRONMENTALLY-FRIENDLY INKS. -OEM PROTOCOL COMPATIBILITY: MOBA.

CAPNA SYSTEMS ETHOS 6 TSC209D CRYO-ETHANOL EXTRACTOR. TYPE-6 NON-VOLATILE EXTRACTOR. SPECS & FEATURES: -CAN EXTRACT UP TO 14 POUNDS OF PLANT MATERIAL PER HOUR. -3600G/40 MINUTE EXTRACTION THROUGHPUT -36 GALLON HOLDING CAPACITY. -CREATES WAX-FREE EXTRACTS WITH 98.6% EFFICIENCY RATE. -INCLUDES CERES DRYING CENTRIFUGE.

WEXXAR WF 2T TAPE BOTTOM SEAL CASE ERECTOR. MODEL WF 2T. 30 CASES/MIN. RIGHT HANDED CASES. SPECS & FEATURES: -RIGHT HANDED CASES -PRODUCTION OUTPUT RATE: UP TO 30 CASES PER MINUTE -MINIMUM CASE DIMENSIONS: 7 LENGTH X 5 WIDTH X 5 HEIGHT (INCHES) -MAXIMUM CASE DIMENSIONS: 24 LENGTH X 17 WIDTH X 16 HEIGHT (INCHES) -CASE MAGAZINE DIMENSIONS: 67 LENGTH X 39 WIDTH (INCHES) -CASE MAGAZINE HEIGHT: 33 INCHES -DISCHARGE HEIGHT: 27 INCHES AIR REQUIREMENTS: 0.3 CUBIC FEET PER CYCLE 90 POUNDS PER SQUARE INCH -TAPE HEAD SIZE:3 INCHES -ELECTRICALS: PHASE: 3 VOLTAGE: 460 AMPERAGE: 1.5 FREQUENCY: 60 HERTZ -OVERALL DIMENSIONS: 148 LENGTH X 50 WIDTH X 75 HEIGHT (INCHES)

GRANVILLE HEMP FLOWER EXTRACTOR & SHAKER TABLE WITH VACUUM SYSTEM MADE FOR CONVEYOR STYLE LOADING. SPECS AND FEATURES: -THE FLOWER EXTRACTOR SYSTEM CAN EFFICIENTLY STRIP AND CLEAN 13,000 LBS OF WET MATERIAL AFTER BEING DRIED IN LESS THAN 4 HOURS. EASILY SEPARATE BIOMASS LEAVING YOU WITH CBD RICH MATERIAL. LOT INCLUDES: -1) GRANVILLE HEMP FLOWER EXTRACTOR WITH VACUUM SYSTEM. DIMS: 67" TALL X 92" LONG X 72" WIDE. ESTIMATED WEIGHT: 1500LBS. POWER: 20HP THREE PHASE OPTION WIRED ON LOW VOLTAGE 230/240VOLT -(1) 16' PICKING CONVEYOR WITH 36" WIDE SLICKTOP BELT. DIMS: 18" TALL WITHOUT LEGS ATTACHED X 42" WIDE (MOTOR MAKES 50" WIDE FOR HAULING) X 16' LONG. POWER: DANFOSS VFD IN CONTROL BOX WITH SHAKER VFD - 240VOLT 30AMP. ESTIMATED WEIGHT: 450LBS -(1) 18' INFEED CONVEYOR TO FLOWER EXTRACTOR DIMS: 18' LONG X 24" WIDE X 76" TALL WITH--- -(1) HEMP SHAKER TABLE. DIMS: 91" LONG X 39" WIDE X 36" TALL ESTIMATED WEIGHT: 1200LBS--- -(1) SHAKER OUTPUT CONVEYOR. 12" WIDE X 108" LONG WITH HABASIT MATTE TOP BELT 1/3 HP INVERTER DUTY DRIVE, 20 TO 1 RATIO.

TAEVO TECH-081 INDUSTRIAL PROCESS WATER CHILLER SPECS & FEATURES: -COOLING CAPACITY: 7.5 TON (CAPACITY BASED ON 45F WATER OUTLET TEMP.; 10 DEGREES F DELTA T @ 95 DEGREES F AMBIENT TEMPERATURE) -BTU/HR: 90,000 -RESERVOIR CAPACITY: 37 GALLONS -WATER FLOW (MIN/MAX): 11.1/ 42.3 GAL/MIN -AVAILABLE HEAD PRESSURE (MIN/MAX): 22.2/ 42.6 PSI -TOTAL AIR FLOW: 5825 CFM -TOTAL ABSORBED POWER : 2.38 KW -PUMP POWER : 0.90 KW -FAN POWER: 1.03 KW -DIMENSIONS: WIDTH: 29.9 IN X DEPTH: 73.4 IN XHEIGHT: 57 IN -ELECTRICAL: VOLTS/PHASE: 460/3 HZ: 60 FLA: 30. COMPRESSOR(S) FOR EACH CIRCUIT: 1 FAN(S): 1 -REFRIGERANT: R410A -PROTECTION CLASS: IP 54

USED-EXTRAKTLAB DRAINDROYD VACUUM FILTRATION SYSTEM. MAKES HIGH-THROUGHPUT WAX REMOVAL FROM WINTERIZED ETHANOL SOLUTIONS. SEPARATES FATS, WAXES AND OTHER SOLIDS FROM HEMP OR BOTANICAL EXTRACTS. SPECS & FEATURES: -PROCESS: POURING A WINTERIZED ETHANOL/CRUDE OIL MIXTURE THROUGH A FILTER PAPER THAT CAPTURES THE REMAINING SOLIDS WHILE THE DESIRED LIQUID IS PULLED THROUGH A FUNNEL VIA VACUUM INTO A COLLECTION VESSEL OR FLASK -FILTRATION RATES OF UP TO 5 LITERS IN 5 MINUTES. -ALL 316 STAINLESS STEEL CONSTRUCTION FOR SUPERB CLEANABILITY -VARIOUS FILTER MEDIA AVAILABLE FOR DIFFERENT LEVELS OF FINISH; OPTIONAL INCORPORATION OF VARIOUS SORBENT MEDIA FOR DECOLORIZATION -ADJUSTABLE HEIGHT CASTERS FOR PORTABILITY; INCORPORATION OF CONTAINMENT VESSEL FOR IMPROVED ISOLATION FROM THE ENVIRONMENT -GMP COMPLIANT INTEGRATED PRODUCT CONTAINMENT FOR SAFETY AND CONTAMINATION ELIMINATION. -150 L RESERVOIR VOLUME, UP TO 80 DEGREES C OPERATING TEMPERATURE, 4 GALLON COLLECTION VOLUME, -DIMS: 24" X 24" X 43", APPROXIMATE 75 LBS.

ACROSS INTERNATIONAL 5.3G/20L ROTARY EVAPORATOR W/ CHILLER, PUMP & DUAL 10 L RECEIVING FLASKS SPECS & FEATURES: -EVAPORATING FLASK: CAPACITY: 5.28 GALLON (20 LITERS OR 0.7 CU FT),SEALING FLANGE: 4.9" DIAMETER -EVAPORATING FLASK ROTATION SPEED: 10 TO 130 RPM -EVAPORATING SPEED: 1 GALLON/HOUR (WATER), 2 GALLON/HOUR (ALCOHOL) -DUAL RECEIVING FLASKS: 2.64 GALLON (10 LITERS OR 0.35 CU FT) -WORKING TEMP RANGE: 5 - 95 DEGREES F -WATER BATH SPECS: TEMPERATURE RANGE IS AMBIENT TO 99 DEGREES C (210 DEGREES F). DIMS: 17.5" DIAMETER X 9.8" DEPTH X 12" HEIGHT LOT INCLUDES: -MAIN APPARATUS W/ 20 L ROTARY EVAPORATING FLASK -(2) 10 L RECIVING FLASK -INLCUDES DIGIVAC VAPOR PRESSURE CONTROLLER -INCLUDES ACROSS INTERNATIONAL C30-30 -30 DEGREES C 30L CAPACITY RECIRCULATING CHILLER AND ACCESSORIES -WELCH MODEL 2052 2.3 CFM 1.5 TORR 4-HEAD DIAPHRAGM PUMP AND VACUUM HOSE -INCLUDES ALL STANDARD PACKAGE GLASS

COLORADO EXTRACTION SYSTEMS SPRAYVAP SYSTEM W/TRIPLEXTRACT SYSTEM. MODEL SV20. SPECS & FEATURES: -CLOSED LOOP CONTINUOUS FEED. CAPABLE OF 11 TO 22 LPH (ETHANOL). -SHORT RESIDENCE TIME IN HEATING ZONE. HIGH HEAT TRANSFER COEFFICIENTS DUE TO PARTIAL TWO-PHASE FLOW. SELF CLEANING. INCLUDES MOKON CHILLER. FDA COMPLIANT. LAST USED IN A CANNABIS APPLICATION. LOT INCLUDES: -INCLUDES 2L P OIL COLLECTION FLASK. KIT INCLUDES O-RINGS, FITTINGS, EXTRA 2L OIL COLLECTION FLASK, AND TUBING. -TX20 TRIPLE X-TRACT SYSTEM (INCLUDES BOROSILICATE 20L BOTTLE, 1 18 GAL. REACTOR WITH COVER, POLYPROPYLENE LINED HOSES, 3 FILTRATION HOUSINGS, VALVING, CART, VACUUM PUMP AND PANEL)

CASCADE SCIENCES CVO-5 VACUUM OVEN. BENCHTOP SET UP W/ VACUUM PUMP. CVO-5 VACUUM OVEN OFFERS INCREDIBLE TEMPERATURE STABILITY FOR VACUUM DRYING AND PURGING OF PHARMACEUTICALS, BOTANICALS, SLURRIES, OR ANY TEMPERATURE SENSITIVE MATERIAL. SPECS & FEATURES: -5 REMOVABLE, HEIGHT ADJUSTABLE ALUMINUM SHELVES. -PASSIVE FILTER TRAP ON VACUUM PUMP INLET. -CONNECTIONS: 3/8TH VACUUM RATED TUBING -KF-16 CONNECTION HARDWARE. -STABLE TEMPERATURE CONTROL -DIGITAL TEMPERATURE READOUT WITH TEMP SENSOR INSIDE THE OVEN. -WELCH VACUUM PUMP (2052C-02) INCLUDED. -PUMP INTERIOR IS MADE OF SOLVENT RESISTANT, PTFE DIAPHRAGMS. -BOTH OVEN AND PUMP CAN RUN OFF A SINGLE DEDICATED 120V / 1PH / 20 AMP CIRCUIT.

USED ACROSS INTERNATIONAL SHORT PATH COMPLETE TURNKEY PACKAGE. MODEL CLEAR10S. SPECS & FEATURES: -10 LITER CAPACITY -5L DISTILLATION HEAD WITH LARGER VACUUM JACKET FOR LESS HEAT LOSS DURING DISTILLATION -GLASS MATERIAL: HIGH BOROSILICATE GLASS 3.3 LOT INCLUDES: -MAIN APPARTUS W/HEAVY WALL ROUND BOTTOM 3-NECK 10L FLASK WITH ONE VERTICAL 24/40 CENTER NECK AND TWO VERTICAL 34/45 SIDE NECKS -AI C20 -20 DEGREES C TO 99 DEGREES 7 LITER CAPACITY RECIRCULATING CHILLER -AI DIGIM10 10L MANTLE WITH TWO 4-PRONG CLAMPS -AI T1 2L GLASS VACUUM COLD TRAP WITH 24/40 JOINTS (T1-2440) -AI SUPERVAC 21 CFM, 0.3 MICRON, DUAL-STAGE, CORROSION-RESIST PUMP W/ ADJUSTABLE GAS BALLAST AND EXHAUST OIL MIST FILTER - (2) J-KEM UNITS. MODEL 250 -RECIRCULATING FLUID AND VACUUM CONNECTORS: GL-16 ADAPTER AND 3/8" HOSE BARB

TWISTER BATCHONE DRY TRIMMER MODEL BATCHONE.THRUPUT OF 88 LBS/HR DRY W/ QUICK RELEASE TUMBLER. INDUSTRY LEADING HORSEPOWER TO MITIGATE STALLING. BUILT SPECIFICALLY FOR CULTIVATORS WHO PREFER DRY TRIMMING AND A BATCH-STYLE WORKFLOW. SPECS & FEATURES: -THROUGHPUT OF 88 LBS/HR DRY. -QUICK RELEASE TUMBLER. MOUNTED ON 360 DEGREE CASTERS. -GFCI COMPATIBLE. -CAN BE SAFELY USED IN A WET AREA. -63" LENGTH X 32" WIDTH X 48" HEIGHT. UL & CSA COMPLIANT.

TWISTER BATCHONE DRY TRIMMER. THROUGHPUT OF 88 LBS/HR DRY. QUICK RELEASE TUMBLER. MOUNTED ON 360 DEGREE CASTERS. INDUSTRY LEADING HORSEPOWER TO MITIGATE STALLING. BUILT SPECIFICALLY FOR CULTIVATORS WHO PREFER DRY TRIMMING AND A BATCH-STYLE WORKFLOW. INDUSTRYOS LEADING THROUGHPUT AND TRIM QUALITY IN A MOBILE UNIT. GFCI COMPATIBLE. THE BATCHONE TRIMMER CAN BE SAFELY USED IN A WET AREA. 63" LENGTH X 32" WIDTH X 48" HEIGHT. UL & CSA COMPLIANT. INCLUDES 10 YEAR WARRENTY TIED TO THE SERIAL #.

AGRON AUTO CURE XL CURING CHAMBER FOR CANNABIS FLOWER. MODEL XL. 40 LBS FINISHED PRODUCT, 62 X 68 FOOTPRINT SPECS & FEATURES: FOUR (4) INDIVIDUALLY CONTROLLED CHAMBERS FOR DIFFERENT BATCHES AND STRAINS. EASY-TO-USE TOUCHSCREEN APP ALLOWS THE USER TO DYNAMICALLY CONTROL INTERNAL RH% BY SETTING THE VENTING PARAMETERS ON THE SLIDERS. THE ONLY AUTOMATED CURING OPTION FOR LARGE-SCALE COMMERCIAL GROWERS. AUTO CURE IS SELF-MONITORING AND VENTS ITSELF (AUTOMATIC BURPING) ENTIRELY AND PRECISELY AT THE EXACT MOMENT THAT THE FLOWER DICTATES. DESIGNED TO ELIMINATE MOLD. DIGITAL TOGGLE-SLIDER SYSTEM ALLOWS FOR EASY CHANGES FROM DRYING, CURING, AND STORAGE (EXTENDED CURING) VENTING PARAMETERS. REAL-TIME DATA LOGGING GRAPHICALLY DEPICTS THE RATE OF MOISTURE RELEASE FROM THE DRYING/CURING FLOWER OVER TIME, PROVIDING A VALUABLE TOOL FOR STANDARDIZATION AND BRAND CONSISTENCY AUTOCURE IS SELF-MONITORING AND SELF-ADJUSTING THROUGH ITS CUSTOM DESIGNED SOFTWARE APPLICATION WHICH IS DISPLAYED ON A 7 TOUCHSCREEN. SET THREE DIGITAL SLIDERS TO DESIRED VENTING PARAMETERS, AND LET AUTOCURE DO THE REST OF THE WORK. ALL CURING DATA GENERATED FROM AUTOCURE'S VENT CYCLES IS LOGGED TO A SECURED ONLINE PORTAL WHICH CUSTOMERS ARE ABLE TO ACCESS VIA PROGRAMMED WITH A MANUAL CYCLE FEATURE THAT ALLOWS THE USER TO VENT THE MACHINE AT WILL. ANALYZE AND STANDARDIZE THE CURING PROCESS AND THE FINAL PRODUCT READY FOR SALE. PRODUCES PRODUCT WITH IMPROVED CONSISTENCY, POTENCY, AND DECREASED WASTE. -HARDWARE: 2.75 VENTILATION FANS, HEAVY-DUTY VENTING SERVOS -DISPLAY: 7" LCD TOUCHSCREEN -MATERIAL: LABORATORY-GRADE ACRYLIC

ACROSS INTERNATIONAL R20 20 LITER DUAL JACKETED GLASS REACTOR SYSTEM SPECS & FEATURES: -REACTION GLASS VESSEL CAPACITY: 20 LITERS (5.3 GALLONS) -COOLING/HEATING JACKET CAPACITY (PER JACKET): 6 LITERS (1.6 GALLONS) -MAXIMUM JACKET PRESSURE: 4.4 PSI OR 0.03 MPA -GLASS MATERIAL: HIGH BOROSILICATE GLASS 3.3 -ROTATION SPEED: 50 TO 500 RPM -DRAIN PORT GROUND CLEARANCE: 13 INCHES -ELECTRICAL REQUIREMENTS: 220V 50/60HZ, 1-PHASE, 90 WATTS LOT INCLUDES: -MAIN APPAARTUS -DIGITIAL ROTATION CONTROLLER -CENTER STIRRER AND MOTOR -HOT OIL BATH -VERTICAL CONDENSER WITH DUAL COOLING COILS, 2 CHILLING FLUID PORTS AND 1 VACUUM PORT, GLASS -GLASS CONDENSER DISPENSER WITH DRAIN PORT AND PTFE OPEN/CLOSE VALVE -GLASS MATERIAL FEEDING FUNNEL, LID, AND PTFE OPEN/CLOSE VALVE -INCLUDES DIAPHGRAM PUMP

SHARPSVILLE PRESSURE MIX TANK, 200 LITER, 316L STAINLESS STEEL, VERTICAL. SPECS & FEATURES: -APPROXIMATE 30" DIAMETER X 14" STRAIGHT SIDE, DISHED TOP AND BOTTOM. -INTERNAL RATED 40 PSI AT -20 TO 300 DEGREES F, VACUUM INTERNAL. -BOTTOM ENTERING 4-BLADE TURBINE SANITARY AGITATOR, DRIVEN BY A 1/4 HP, 3/60/230/460 VOLT, 1650 RPM MOTOR. -OPENINGS TOP: 8" WITH COVER, (1) 2", (3) 1-1/2". 1-1/2" CENTER BOTTOM OUTLET, APPROXIMATE 10" DISCHARGE HEIGHT. -MOUNTED ON (4) LEGS WITH CASTERS. NATIONAL BOARD# 6396

LEE INDUSTRIES 250 LDBT PRESSURE MIX TANK, 250 LITER, STAINLESS STEEL, VERTICAL. SPECS & FEATURES: -APPROXIMATE 26" DIAMETER X 25" STRAIGHT SIDE, DISHED TOP AND BOTTOM. -INTERNAL RATED 30 PSI AT -20 TO 300 DEGREES F, VACUUM INTERNAL. -TOP ENTERING DUAL TURBINE AGITATOR, REQUIRES MOTOR. -OPENINGS TOP: 10" WITH COVER, (1) 3", (6) 1-1/2". 1-1/2" CENTER BOTTOM OUTLET, APPROXIMATE 5-1/2" DISCHARGE HEIGHT. -MOUNTED ON (4) LEGS WITH CASTERS. -NATIONAL BOARD # 5994

USA LAB RE-1050 50L ROTARY EVAPORATOR ROTOVAP. SPECS & FEATURES: -50L EVAPORATION FLASK CAPACITY -20L COLLECTION FLASK CAPACITY -20-120 RPM ROTARY SPEED -BATH TEMPERATURE RANGE: ROOM TEMP TO 180 DEGREES CELSIUS (365 DEGREES F) -POWER REQUIREMENTS: ELECTRIC LIFTING MECHANISM, 220-240V 60HZ 30A SINGLE PHASE , -TEMPERATURE CONTROL ACCURACY=+/-1 DEGREES CELSIUS -MOTOR WATTAGE: 250W -HEATER BTU'S: 22,000BTU -WATER BATH VOLUME: 77L -GC-17 BOROSICATE GLASS

VTA VK 100-10 RS WIPED FILM SHORT PATH DISTILLATION SYSTEM. SPECS & FEATURES: -THROUGHPUT: 10,000 ML/H -DISTILLATE YIELD (PER 8 HR. SHIFT): 34 L -EVAPORATOR SURFACE AREA: 0.1 M2 -POWER REQUIREMENTS: 3 PHASE 440 V, 60 HZ, 100 A STAGESSINGLE -DIMENSIONS (L X W X H)10.0 X 5.8 X 6.6 WEIGHT (GROSS)1,830 KG -CERTIFICATIONUL READY (ALL NECESSARY INDIVIDUAL COMPONENTS ARE UL LISTED) -MATERIALS USED: 316 STAINLESS STEEL, BOROSILICATE GLASS, GRAPHITE WIPERS LOT INCLUDES: -MAIN APPARATUS -ALL PICTURED ANCILLARY PARTS INCLUDING JULABO UNITS

USED MARKEM HIGH RES IMAGE 2 HEAD PRINT CARTON CODER. MODEL 5800-2PH UP TO 121 METERS/MIN (BARCODES) - USED MARKEM HIGH RESOLUTION IMAGE 2-HEAD PRINT CARTON CODER. MODEL 5800-2PH. SPECS & FEATURES: -RELIABLE PRINTING AT SPEEDS UP TO 121 METERS/MINUTE (BARCODES). -MULTIPLE JETTING ORIENTATIONS; SINGLE SIDE, OPPOSITE SIDE, SIDE (UP TO 30 TILT ANGLE FOR INCLINED CONVEYORS), AND TOP PRINTING AND SMALLER OVERALL FOOTPRINT. -MARKEM-IMAJE OFFERS THE HIGHEST OPTICAL DENSITY INK TO ACHIEVE C-GRADE GS1-128 BARCODES -PRINT ON A WIDE RANGE OF SUBSTRATES AND IN ENVIRONMENTS RANGING FROM 0 TO 40 DEGREES C -IMPROVES PRODUCTIVITY BY ENABLING OPERATORS TO REPLENISH INK WITHOUT STOPPING THE PRODUCTION LINE -UNCOMPLICATED MENU STRUCTURE COMBINED WITH EASY TO NAVIGATE TOUCH SCREEN USER INTERFACE -AUTOPURGE TECHNOLOGY REDUCE OPERATOR MAINTENANCE. SEE FURTHER SPECS IN LAST PICTURE

STM MINI-ROCKETBOX PLUS+SPECS & FEATURES: -VOLUME PER CYCLE: 143 PRE ROLLS IN 30-45 SECONDS -VARIABLE SPEED CONTROL -FOR USE WITH 84MM, 98MM & 109MM, (70MM DOGWALKERS & CIGARETTE STYLE AVAILABLE) -ADJUSTABLE TOP TRAY TO REGULATE FILL VOLUME -LIFT PLATE CONE LEVELING SYSTEM FOR EVEN PACKING -ELETRICAL: FULL-LOAD 5.2 AMPS / STANDARD 110V 3 PRONG PLUG / 2310 WATTS -COMPOSED OF STAINLESS STEEL -NO PRE-WEIGHING NECESSARY -PATENETED AIR LEVELING SYSTEM (NO TAMPERING) -OSHA COMPLIANT LOT INCLUDES: -MAIN APPARATUS -CONTROL PANEL

OXFORD INSTRUMENTS X-STRATA920 W/ MINI-WELL BASE. MODEL P920-MWS. THE X-STRATA920 IS A COMPACT, RUGGED AND RELIABLE QUALITY CONTROL XRF BENCHTOP SYSTEM FOR SIMPLE, RAPID, COATING THICKNESS MEASUREMENT AND ELEMENTAL COMPOSITION. SPECS & FEATURES: -INTEGRATED LASER: SIMPLE POINT AND CLICK OPERATION TO BRING SAMPLE INTO FOCUS FIXED FOCAL DISTANCE: 0.5 (12.7 MM) -MULTI PRIMARY BEAM COLLIMATORS -COST-EFFECTIVE, RAPID AND RELIABLE XRF FOR COATING THICKNESS MEASUREMENT AND MATERIALS ANALYSIS -MINI-WELL BASE -BENEFITS OF ANALYSIS BY X-RAY FLUORESCENCE: MINIMAL OR NO SAMPLE PREPARATION. NON-DESTRUCTIVE ANALYSIS AND MORE. -MEASURES THE THICKNESS OF SINGLE OR MULTIPLE LAYERS -EMPIRICAL CALIBRATIONS PROVIDE BEST ACCURACY AND RESULTS TRACEABILITY, AND USE ONLY A FEW STANDARDS -CERTIFIED STANDARDS FOR BEST ACCURACY (A2LA AND ISO/IEC 17025 ACCREDITED LOT INCLUDES: -MAIN APPARTUS XSTRATA 920 W/ MINI-WELL -COMPUTER TOWER WITH SOFTWARE INSTALLED, KEYBOARD, MOUSE, MONITOR, HOOKUPS, AND DOCUMENATION.

2020 SHANGHAI BETTER INDUSTRY CO. LTD HCV-50/40 LOW TEMPERATURE CIRCULATING PUMP/CHILLER SPECS & FEATURES: -CAPACITY: 50 LITERS -ELECTRICAL REQUIREMENTS: 220V / 60HZ. 2250 WATTS -DIMS: 700 MM X 650 MM X 1205 MM

BALDOR HM9229T (EHM3311T) VARIABLE TORQUE MOTOR SPECS & FEATURES: -ENCLOSURE - OPSB, FRAME - 213T, FRAME MATERIAL - STEEL -FREQUENCY - 60.00 HZ -OUTPUT @ FREQUENCY 7.500 HP @ 60 HZ PHASE - 3 -SYNCHRONOUS SPEED @ FREQUENCY 1800 RPM @ 60 HZ -VOLTAGE @ FREQUENCY 460.0 V @ 60 HZ / 230.0 V @ 60 HZ -AMBIENT TEMPERATURE - 40 DEGREES C, BASE INDICATOR - RIGID, BEARING GREASE TYPE - POLYREX EM (-20F +300F) -EFFICIENCY @ 100% LOAD 91.0 %, HIGH VOLTAGE FULL LOAD AMPS - 9.8 A -FRONT FACE CODE - STANDARD, INSULATION CLASS - F

RHEEM ZRT250KCE-TFD-950 SCROLL TANDEM COMPRESSOR SPECS & FEATURES: -CAPACITY (BTU/HR): 248, 100 -TYPE: SCROLL - TANDEM, REFRIGERANT: R-22 -ELECTRICAL: INPUT VOLTAGE (V): 380-415, INPUT VOLTAGE (V): 460, NO. OF PHASES: 3, FREQ. (HZ.): 60 -LOAD RATINGS: RATED LOAD CURRENT (A): 19.2, MAX. CONTINUOUS CURRENT (A): 26.9, LOCKED ROTOR CURRENT (A): 125 -CRANKCASE HEATER PART NUMBER: 44-17402-18 -REFRIGERANT OIL: POE (85-32CST) -OVERALL COMPRESSOR HEIGHT (IN.): 21-1/2

BUSCH RC0100.E5Z6.1006 TWO-STAGE RECIPROCATING VACUUM PUMP SYSTEM W/ RECEIVER TANK MOUNTED. SPECS & FEATURES: -EACH PUMP IS A MODEL RC0100.E5Z6.1006 VACUUM PUMP RATED FOR 15 TORR. -EACH PUMP HAS A 5 HP TOSHIBA MOTOR. 1720 RPM. 3/60/230/460 V. -INCLUDES START AND STOP PANEL.

BMC B-688 3 X 8 FOOT FUME HOOD. SPECS & FEATURES: -96" INCHES WIDE -FULL FRAMED COMBINATION HORIZONTAL/VERTICAL SLIDING SASH. THE SASH IS GLAZED WITH 7/32" LAMINATED SAFETY GLASS AND IS COUNTERWEIGHTED FOR ONE FINGER VERTICAL OPERATION -A FLUORESCENT LIGHT FIXTURE COMPLETED WITH TUBES ILLUMINATES THE INTERIOR OF THE ADA FUME HOOD. BMC B-708 3 X 8 FOOT FUME HOOD.

US WATER SYSTEMS 405-OUV-200 PULSAR ULTRAVIOLET WATER SANITIZING SYSTEM 20"