CNCFabrication Machinery Monthly Consignment Auction

1997 MAZAK VTC-30 VMC X-AXIS TRAVEL: 62 Y-AXIS TRAVEL: 25 Z-AXIS TRAVEL: 25 MAXIMUM SPINDLE SPEED: 10,000 RPM SPINDLE MOTOR POWER: 20 HP SPINDLE TAPER: CAT 40 TOOL CAPACITY: 24 TOOLS RAPID TRAVERSE RATE (X/Y/Z): 24,000 MM/MIN (944.88 IPM) CUTTING FEED RATE: 1 10,000 MM/MIN (0.039 393.7 IPM) MACHINE DIMENSIONS: 126.8 INCHES X 118.1 INCHES X 122.1 MACHINE WEIGHT: 22,046 LBS EQUIPPED WITH MAZATROL M-PLUS CNC CONTROL

2021 HOMAG EDGETEQ T-200 EDGEBANDING MACHINE WORKPIECE THICKNESS .4 INCH TO 2.15 INCH WORKPIECE WIDTH MINIMUM 1.2 INCH EDGE LENGTH MINIMUM 7.1 INCH EDGE THICKNESS 0.02 INCH TO 0.12 INCH COIL CUT-OFF: 0,5 1,0 MM (EDGE HEIGHT MAX. 60 MM) COIL CUT-OFF: 1,0 3,0 MM (EDGE HEIGHT MAX. 30 MM) FEED SPEED VARIABLE: 3,0 9,0 M/MIN WORKING HEIGHT: 925 MM ELECTRICS: 400 V 3 PH 50 HZ PNEUMATIC: 6 BAR DIMENSIONS: 45X30X36 APPROXIMATE WEIGHT: 551 LBS ALL SPECIFICATIONS ARE ASSUMED TO BE CORRECT BUT MUST BE CONFIRMED BY THE PURCHASING ENTITY.

1955 LEHMANN HYDRATROL 7 22 1/2" X 110" HOLLOW SPINDLE LATHE WITH FRONT & REAR CHUCKS. 22.5" SWING OVER BED, 110" DISTANCE BETWEEN CENTERS, 7" HOLLOW SPINDLE, DUAL CHUCKS, TAPER ATTACHMENT.

2015 DMG MORI NVX 5100 / 50 CNC VERTICAL MACHINING CENTER, VMC SN:NV503150427 X MAX. TRAVEL 1.050 MM Y DIRECTION MAX. TRAVEL 530 MM Z MAX. TRAVEL 510 MM MAX. TABLE LOAD 1.200 KG TABLE LENGTH 1.350 MM TABLE WIDTH 600 MM WORKHOLDING IS NOT INCLUDED

CONE PLATE ROLLING MACHINE

2010 KENT KTM MILL TABLE SIZE: 9" X 42" TABLE HEIGHT ABOVE FLOOR: 47.25" X-AXIS TRAVEL: 30" Y-AXIS TRAVEL: 12" Z-AXIS-KNEE (MANUAL) TRAVEL: 16" RAM TRAVEL: 12" QUILL TRAVEL: 5" SPINDLE SPEED: 60 - 4,500 RPM SPINDLE POWER: 3 HP THROAT DISTANCE: 6" - 23" MIN TABLE TO SPINDLE NOSE GAGE LINE: 2.5" MAX WORKPIECE WEIGHT: 750 LBS

2005 MAZAK QT NEXUS 300 CNC LATHE, 2005 MAZAK QT NEXUS 300 CNC TURNING CENTER SWING: 26.77" MACHINING LENGTH: 48" SPINDLE SPEED: 4000 RPM CHUCK: 10" CONTROL: MAZATROL FUSION 640T NEXUS

2003 TRUMPF TRUMATIC 6000L LASER/TURRET COMBO 24 TON S/N: A0100A0173 TONNAGE: 24 TONS WATTAGE: 3200 WATTS SHEET SIZE: 60 X 120 MAXIMUM STROKE RATE: PUNCHING (E = 1 MM): 917 PUNCHES PER MINUTE / 1000 PUNCHES PER MINUTE MARKING: 2800 MARKS PER MINUTE / 2800 MARKS PER MINUTE WORKING RANGE: PUNCHING MODE: X-AXIS: 98.4 Y-AXIS: 49.2 LASER OPERATION: X-AXIS: 2500 MM Y-AXIS: 49.2 COMBINED OPERATION: X-AXIS: 98.4 Y-AXIS: 49.2 MAXIMUM SHEET THICKNESS: 0.31 MAXIMUM WORKPIECE WEIGHT: 330.69 LBS MULTI TOOL TOOL CHANGING TIME: 0.3 SECONDS NUMBER OF TOOLS/CLAMPS: 22 PIECES

2017 LISSMAC SMW 533 RRB DEBURRING MACHINE CAPACITY: 37 THICKNESS: 4.72 MAX MAXIMUM ABRASIVE BELT WIDTH: 37 MAXIMUM WORKING WIDTH: 37 CONSTANT PASSLINE: 39.37 MINIMUM WORKPIECE THICKNESS: 0.0196 MAXIMUM WORKPIECE THICKNESS: 4.72 CONVEYOR BELT FEED SPEED: 47.2 393 IPM CONVEYOR TABLE FEED AREA: 32.65 S/N: 013301

2011 LISSMAC SBM-M1500 DEBURRING MACHINE WORKING WIDTH MAX.: 40-60 WORKABLE MATERIAL THICKNESS: 0.2-4.72 LOAD: 661 LBS/FT VOLTAGE: 480 V / 60 HZ NETWORK STRUCTURE: 3~ PEN / 3~ PE+N TOTAL CURRENT CONSUMPTION: 13.5 A TOTAL POWER: 8 KW INSULATION CLASS: IP 42 INFINITELY VARIABLE FEED SPEED: 0-13 FT/MIN ADJUSTMENT OF MATERIAL THICKNESS: ELECTRIC ADJUSTMENT OF TOOLS: ELECTRIC WEIGHT APPROX.: 5070 LBS DIMENSIONS (W/D/H) APPROX.: 123 X 56 X 71 S/N: E27L 1002

2010 HAEGER 824PLUS-H INSERTION MACHINE SN: SPL10939 FORCE RANGE: ADJUSTABLE 800 LBS. 16,000 LBS. THROAT DEPTH: 24 STROKE LENGTH: ADJUSTABLE 0 8.5 ELECTRICAL: 240/480 3 PHASE OIL TANK CAPACITY: 22 GAL. MOTOR: 5 HP SPEED: UP TO 1,400 FASTENERS PER HOUR REPEATABILITY: + OR 2% OF FORCE SETTING WEIGHT: 2,800 LBS. FOOTPRINT: 59L X 38W X 94H FASTENER RANGE: .256 .500 (M2 M12)

2014 TRUMPF TRUPUNCH 3000 SERVO ELECTRIC CNC PUNCH W/ SHEETMASTER S/N: A0035A0404 TONNAGE/KW: 22 TON Y-AXIS: 50 X-AXIS: 100 TONNAGE CAPACITY: 22 TONS MAXIMUM SHEET THICKNESS: .25 MAXIMUM PUNCH DIAMETER: 3 Y-AXIS TABLE TRAVEL: 50 X-AXIS TABLE TRAVEL: 100 STROKE RATE (.0404 PITCH): 1000 /MIN C-AXIS: 5.5 ROTATIONS / SEC MAXIMUM POSITIONING SPEED (Y-AXIS): 2236 IPM MAXIMUM POSITIONING SPEED (X-AXIS): 3543 IPM SIMULTANEOUS (X & Y) AXIS: 4242 IPM PART CHUTE SIZE: 7 X 20 MAXIMUM FORMING HEIGHT: 1 APPROXIMATE DIMENSIONS: 204 X 252 APPROXIMATE WEIGHT: 24,000 LBS

2003 STOPA D-77855 MATERIAL HANDLING TOWER LOAD CAPACITY: 6,600 LBS PLATE SIZE: 49X98 STOCK CAPACITY: 99 SYSTEM HEIGHT: 161 NUMBER OF STATIONS: 30 S/N: 032870

2006 MATSUURA MAM 72-63V PC6 5-AXIS VMC, TRAVEL: X / Y / Z MM 760 / 845 / 610 TRAVEL: A / C DEG -110 +10 / 360 NUMBER OF PALLETS 2 STANDARD. SINGLE TABLE / 6 / 17 / 35 / FMS OPTIONS WORKING SURFACE MM 500 X 500 MAX WORK SIZE MM 720 X H450 LOADING CAPACITY PER PALLET KG 350 SPINDLE SPEED MIN-1 12,000: BT40 STANDARD. 15,000 / 20,000 / BT40 OPTIONS RAPID TRAVERSE: X / Y / Z M / MIN 50 RAPID TRAVERSE: A / C MIN-1 25 / 50 NUMBER OF TOOLS 30 STANDARD - UP TO 520 OPTIONAL MAXIMUM TOOL LENGTH MM 350 MAXIMUM TOOL WEIGHT KG 10 TOOL CHANGING TIME SECS 1.1 NC CONTROL MATSUURA G-TECH 31I / TOUCH SCREEN CONTROL ALL SPECIFICATIONS ARE ASSUMED TO BE CORRECT BUT MUST BE CONFIRMED BY THE PURCHASING ENTITY.

2010 HAEGER 824PLUS-H INSERTION MACHINE 8 TON S/N: SPL10940 FORCE RANGE: ADJUSTABLE 800 LBS. - 16,000 LBS. THROAT DEPTH: 24" STROKE LENGTH: ADJUSTABLE 0" - 8.5" ELECTRICAL: 240/480 3 PHASE OIL TANK CAPACITY: 22 GAL. MOTOR: 5 HP SPEED: UP TO 1,400 FASTENERS PER HOUR REPEATABILITY: + OR - 2% OF FORCE SETTING WEIGHT: 2,800 LBS. FOOTPRINT: 59"L X 38"W X 94"H FASTENER RANGE: .256" - .500" (M2 - M12)

2004 TRUMPF TRUMATIC 6000L LASER/TURRET COMBO 24 TON, 3200 WATTS, S/N: A0100A0310 TONNAGE: 24 TONS WATTAGE: 3200 WATTS SHEET SIZE: 60 X 120 MAXIMUM STROKE RATE: PUNCHING (E = 1 MM): 917 PUNCHES PER MINUTE / 1000 PUNCHES PER MINUTE MARKING: 2800 MARKS PER MINUTE / 2800 MARKS PER MINUTE WORKING RANGE: PUNCHING MODE: X-AXIS: 98.4 Y-AXIS: 49.2 LASER OPERATION: X-AXIS: 2500 MM Y-AXIS: 49.2 COMBINED OPERATION: X-AXIS: 98.4 Y-AXIS: 49.2 MAXIMUM SHEET THICKNESS: 0.31 MAXIMUM WORKPIECE WEIGHT: 330.69 LBS MULTI TOOL TOOL CHANGING TIME: 0.3 SECONDS NUMBER OF TOOLS/CLAMPS: 22 PIECES

2002 HAAS MINILATHE CNC LATHE - 2002 HAAS MINI LATHE CNC TURNING CENTER CONDITION: USED/GOOD CONDITION SPECIFICATIONS: SERIAL NO.: 65612 DATE OF MFG: 12-02 VOLTAGE: 208/240 PHASE: 3/1 HERTZ: 50/60 FULL LOAD: 25/40 AMPS LARGEST LOAD: 15 AMPS ALL SPECIFICATIONS ARE ASSUMED TO BE CORRECT BUT MUST BE CONFIRMED BY THE PURCHASING ENTITY.

MORI SEIKI SL-3H CNC NUMERICAL CONTROL LATHE - MORI SEIKI SL-3H CNC NUMERICAL CONTROL TURNING CENTER TYPE: SL-3H PHASE: 3 VOLT: 220 CYCLE: 60HZ LOAD: 33.0KVA S/N: 4042

2002 MAZAK VTC-200B

2002 MAZAK VTC-200B I

2003 BROTHER TC-32A VMC, PALLETING TABLE, 4TH AXIS ON EACH TABLE, EXTRA HARDWARE! - TABLE WORKING SURFACE: 21.7 X 13.8 X-AXIS TRAVEL: 17.7 Y-AXIS TRAVEL: 12.6 Z-AXIS TRAVEL: 16.1 SPINDLE TAPER: BT30 SPINDLE SPEED: 16000 RPM TOOL CHANGER POSITIONS: 26 ATC RAPID TRAVERSE RATE. 2756 IPM 230 VOLT 2 4TH AXIS A ROTARY HI-PRESSURE COOLANT BUILT IN HYDRAULIC CLAMPING MANUAL PULSE GENERATOR (MANUAL HAND CONTROL PENDANT) 26 TOOL CHANGER ROBOTIC CONTROL NEW 4 TH AXIS CABLING 75 GALLON COOLANT TANK W/ CHIP CONVEYOR EXTRAS TO COME WITH MACHINE! 2 A AXIS AMPS 40 AMP DISCONNECT 3 X-Y-Z AMPS SERVO AMPLIFIER FORWARD REVERSE CONTACTOR TOOL ARM PARTS 4TH AXIS A ROTARY MONITOR W/KEYPAD OPERATORS, INSTALLATION, AND PROGRAMMING MANUALS POTENTIAL AXIS SERVO MOTOR ISSUE; DOES COME WITH EXTRA HARDWARE.

MORI SEIKI MV-40M VERTICAL MACHINING CENTER, VMC SPECIFICATIONS: S/N: 4924 PHASE: 3 FREQUENCY: 60HZ VOLTAGE: 220V RATED POWER: 18.2KVA

2002 STRATHCLYDE HS-500 VERTICAL CNC MILLING MACHINE, VMC S/N: 02002. SPECIFICATIONS: VOLT: 220 PHASE: 3 TYPE: HS-500 FREQ: 60HZ RATED CAP: 15KVA AC: 220V DC: 24V RPM: 45,000

2002 HAAS SL-10 CNC LATHE - 2002 HAAS SL-10 CNC TURNING CENTER SPECIFICATIONS: S/N: 65049 DATE OF MFG: 04-02 VOLTAGE: 208/230 PHASE: 3 HERTZ: 50/60 FULL LOAD: 40 AMPS LARGEST LOAD: 30 AMPS

PINK GRANITE SURFACE PLATE 12'' X 12'' X 4'' TABLE SIZE

MITUTOYO 8" DIAL CALIPER

VERNIER CALIPER

1996 MITSUBISHI M-V5B CNC VERTICAL MILL CAT 40 VMC SPECIFICATIONS: X AXIS TRAVEL 31.5" Y AXIS TRAVEL 20.1" Z AXIS TRAVEL 18.1" TABLE SIZE 20.1" X 39.4" MAX TABLE LOAD 1,100 LBS MOTOR 10 HP SPINDLE TAPER CAT 40 SPINDLE SPEED 80-8,000 RPM ATC 18 ATC CHANGE TIME 1.5 SECONDS MAX FEEDRATE 393 IPM RAPID TRAVERSE (X, Y) 1181 IPM RAPID TRAVERSE (Z) 787 IPM EQUIPPED WITH: - MELDAS 500 CONTROL - AC COOLED SPINDLE, HELICAL THREADED, EXPANDED MEMORY. SERIAL #: MV4359 HORSE POWER: 10 NUMBER OF AXIS: 3 TOOLING INCLUDED: NO UNDER POWER OR OPERABLE: NO ELECTRIC FOOT SWITCH: NO COOLANT SYSTEM: YES RPM: 80 - 8,000 CONTROLS: MELDAS 500

KALAMAZOO BELT SANDER 2'' X 21'' BELT SIZE

2008 HAAS VF-3SS CNC VERTICAL MACHINE CENTER, VMC S/N: 1068269 TABLE WORKING SURFACE 48'' X 18'', TABLE LOAD CAPACITY 1,750 LBS, TABLE TRAVELS 40'' X 20'' X 25'', FEED RATE ALL AXIS 833 IPM, RAPID TRAVERSE RATE , ALL AXIS 1,400 IPM, SPINDLE NOSE TO TABLE 4'' - 29'', TOOL CHANGER ARM STYLE 24 + 1, CHIP TO CHIP TOOL CHANGE 2.2 SECONDS AVERAGE , SPINDLE HORSEPOWER 30 HP, SPINDLE TAPER #40 BT, WAY SYSTEM LINEAR GUIDEWAY, OVERALL DIMENSIONS 110'' X 118'' X 117'', APPROX WEIGHT 12,500 LBS, 12000 RPM INLINE DIRECT DRIVE SPINDLE, 24 SIDE MOUNT AUTOMATIC TOOL CHANGER, 1400 IPM, CNC CONTROLS, AUTOMATIC CHIP AUGER, 208/230 V, 3 PH, 50/60 HZ, 80 AMP, 70 AMP

LOT OF (5) BT #40 TOOL HOLDERS

LOT OF (5) BT #40 TOOL HOLDERS

2004 HAAS VF-3SS CNC VERTICAL MACHINE CENTER, VMC SN: 37236 TABLE WORKING SURFACE 48'' X 18'', TABLE LOAD CAPACITY 1,750 LBS, TABLE TRAVELS 40'' X 20'' X 25'', FEED RATE ALL AXIS 833 IPM, RAPID TRAVERSE RATE , ALL AXIS 1,400 IPM, SPINDLE NOSE TO TABLE 4'' - 29'', TOOL CHANGER ARM STYLE 24 + 1, CHIP TO CHIP TOOL CHANGE 2.2 SECONDS AVERAGE , SPINDLE HORSEPOWER 30 HP, SPINDLE TAPER $40 BT, WAY SYSTEM LINEAR GUIDEWAY, OVERALL DIMENSIONS 110'' X 118'' X 117'', APPROX WEIGHT 12,500 LBS, 12000 RPM INLINE DIRECT DRIVE SPINDLE, 24 SIDE MOUNT AUTOMATIC TOOL CHANGER, 1400 IPM, CNC CONTROLS, AUTOMATIC CHIP AUGER, 208/230 V, 3 PH, 50/60 HZ, 80 AMP, 70 AMP

ENCO 1340 GEARED HEAD GAP BED LATHE - ENCO 1340 GEARED HEAD GAP BED TURNING CENTER S/N: 5896 13 X 40 '', 13'' SWING OVER BED, 18 3/4'' SWING IN REMOVABLE GAP SECTION , LENGTH OF GAP SECTION 18'', 8 SPEEDS, MAX SPINDLE SPEED 2000 RPM, MAIN MOTOR 2 HP 230 / 460, TAPER IN HEADSTOCK #5 MT, TAILSTOCK QUILL TAPER #3 MT, , TOOL POST WITH HOLDERS, 3 JAW CHUCK, WITH CHANGEABLE ACCESSORIES, FACE PLATE, TAIL STOCK, AND COLLET CHUCK, BORING BAR TOOLING

2014 OKUMA MA-550VB CNC VERTICAL MACHINING CENTER, VMC S/N: 175075 TABLE SIZE 51.18" X 22.04" TABLE CAPACITY 2204 POUNDS X-AXIS TRAVEL 51.18 INCHES Y-AXIS TRAVEL 22.04 INCHES Z-AXIS TRAVEL 22.04 INCHES RAPID TRAVERSE RATE (X/Y/Z) 1181 IPM SPINDLE TAPER CAT 50 SPINDLE SPEED 6,000 RPM MAIN MOTOR 20 HP TOOL CHANGER CAPACITY 32 COOLANT THRU SPINDLE YES MACHINE DIMENSIONS 126" X 112" X 114" MACHINE WEIGHT 29960 POUNDS WORKHOLDING IS NOT INCLUDED

LOT OF (5) BT #40 TOOL HOLDERS

LOT OF (5) BT #40 TOOL HOLDERS

LOT OF (5) BT #40 TOOL HOLDERS

LOT OF (5) BT #40 TOOL HOLDERS

LOT OF (5) BT #40 TOOL HOLDERS

LOT OF (5) BT #40 TOOL HOLDERS

GENIE PLC-36-P PERSONAL LIFT - NEEDS WORK/BATTERY WORKING HEIGHT: 36 LIFT CAPACITY: 8,000 LBS. SINGLE MAN BASKET BASKET CAPACITY: 250 LBS.

2012 MORI SEIKI NVX 5100 II/50 CNC VERTICAL MACHINING CENTER SN: NV502120742 TABLE DIMENSIONS: 53.1 X 23.6 X-AXIS TRAVEL: 41.3 Y-AXIS TRAVEL: 20.87 Z-AXIS TRAVEL: 20.08 SPINDLE SPEED: 15,000 RPM SPINDLE TAPER: CT50 SPINDLE POWER: 40 HP RAPID TRAVERSE RATE: 1,181 IPM AUTOMATIC TOOL CHANGER: 30 POSITION WORKHOLDING NOT INCLUDED

2018 KITAMURA MYCENTER HX400IG HMC, FULL 4TH AXIS, CTS, LINEAR SCALES X 24 Y 24 Z 24 TABLE LOAD 350LBS SPINDLE MOTOR 30HP RPM 15,000 RPM # ATC 50 TAPER CAT40 PALLET-W 15.75 PALLET-L 15.75 FULL 4TH AXIS EQUIPPED WITH: ARMATIC-MI CONTROL RENISHAW TOUCH PROBE CHIP CONVEYOR 220 PSI COOLANT THRU SPINDLE LINEAR SCALE EXPANDABLE, 2-STATION ROTATING PALLET SYSTEM FULL 4TH AXIS ROTARY TABLE WITH INTEGRAL MOTOR AND HIGH-SPEED 125RPM (45,000DEG/MIN) WORK LIGHT, SINGLE COLOR CYCLE FINISH LAMP, ADDITIONAL M FUNCTIONS 4 SETS, TOOL OFFSET 200 PIECES, REISTERABLE PROGRAMS 1000 PIECES, USER MACRO B 700 VARIABLES, HELICAL INTERPOLATION, 1280 METERS MEMORY, INVERSE TIME FEED, TOOL LIFE MANAGEMENT, 2GB CF/USB DATA SERVER, RAPID FEED: X,Y, Z = 2362 IPM, WORK COORDINATE OFFSET 102 PIECES,BACKGROUND EDITING

2019 YAMA SEIKI BM2100 HIGH RIGIDITY CNC VMC FANUC, 4TH AXIS, CTS - TRAVELS X: 82.6 Y: 39.3 Z: 39.3 POWER: 35 HP SPINDLE MOTOR TAPER: CAT 50 30 TOOL SWING ARM ATC SPINDLE SPEED: 6,000 RPM TABLE (WXL): 39.3 X 90.5 COOLANT THROUGH SPINDLE: 1000 PSI VOLTAGE: 220V 3 PH 100A DIMENSIONS (APPROX. LXWXH): 249 X 168 X 148 WEIGHT: 44,000 LBS EQUIPPED WITH: FANUC OI-MF WITH 10.4 LCD SCREEN RENISHAW PROBE PACKAGE OTS TOOL SETTER AND OMP PART PROBE GANRO TR320 TILT ROTARY TABLE RIP STEADY REST RIP221 6-21 CAPACITY ADVANCE AUTO LUBRICATION SYSTEM W/COPPER PIPING -AIR GUN & COOLANT GUN AIR BUFFER TANK FOR ATC AIR CURTAIN AROUND SPINDLE COOLANT NOZZLE AROUND SPINDLE C3 CLASS BALL SCREWS WITH PRETENSION ON ALL AXES FANUC AC SERVO DRIVE MOTORS COOLANT SYSTEM WITH GRUNDFOS 3/4HP COOLANT PUMP CHIP CONVEYOR / DUAL CHIPAUGERS CHIP WASH DOWN SYSTEM ENCLOSED SPLASH COVERS ELECTRICAL CABINET HEAT EXCHANGER LEVELING KIT HIGH INTENSITY WORK LIGHT (FOR TABLE) INDOOR FLORESCENT LAMPS (FOR MACHINING AREA) M CODE CONTROLLED AIR BLOWER MCODEAUTOMATIC POWER OFF MAINTENANCE TOOL KIT REMOTE MPG HARDENED AND GROUND BOX WAYS OIL SKIMMER OIL TYPE SPINDLE CHILLER OPERATION & MAINTENANCE MANUALS DOOR INTERLOCK 4 AXIS INTERFACE (W/O AMP) BIG PLUS SPINDLE CTS CAPABLE MANUAL GUIDE I +ICONSOLE HIGH SPEED HRV FUNCTION ATA FLASH CARD SOCKET -SPINDLE SYNCHRONOUS CONTROL POSITION SWITCH PART PROGRAM STORAGE 1280M (512K) -400 REGISTERED PROGRAMS -BACKGROUND EDITING PART PROGRAM EDITING CUSTOM MACRO ADDITIONAL CUSTOMER MACRO VARIABLES #100-199, #500-999 4 8 PAIRS ADDITIONAL WORK PIECE COORDINATE SYSTEM LINFAR INTERPOLATION CIRCULAR INTERPOLATION HELICAL INTERPOLATION AI CONTOUR CONTROL (AICC) 40 BLOCKS/ SEC LOOK AHEAD CYLINDRICAL INTERPOLATION A-I ADVANCED PREVIEW CONTROL POLAR COORDINATE COMMAND HIGH SPEED SKIP THREADING. SYNCHRONOUS CUTTING TOOL LENGTH COMPENSATION -400 PAIRS TOOL OFFSET PROGRAMMABLE MIRROR IMAGE -AUTOMATIC CORNER OVERRIDE TAPPING MODE CUTTING MODE COORDINATE SYSTEM ROTATION CANNED CYCLES FOR DRILLING RIGID TAPPING AUTO POWER OFF SOFTWARE FOR EMBEDDED ETHERNET -RS-232 INTERFACE MEMORY CARD INPUT/OUTPUT TOOL LIFE MANAGEMENT

2012 MORI SEIKI NVX 5100 II/50 VMC SN: NV502120839 TABLE DIMENSIONS: 53.1 X 23.6 X-AXIS TRAVEL: 41.3 Y-AXIS TRAVEL: 20.87 Z-AXIS TRAVEL: 20.08 SPINDLE SPEED: 15,000 RPM SPINDLE TAPER: CT50 SPINDLE POWER: 40 HP RAPID TRAVERSE RATE: 1,181 IPM AUTOMATIC TOOL CHANGER: 30 POSITION WORKHOLDING NOT INCLUDED

2013 MORI SEIKI NVX 5100 II/50 CNC VERTICAL MACHINING CENTER, VMC S/N: NV502131015 TABLE SIZE: 53.1" X 23.6" WEIGHT ON TABLE: 2,640 LBS. SPINDLE NOSE TO TABLE: 5.9" - 26" X - AXIS TRAVEL: 41.3" Y - AXIS TRAVEL: 20.9" Z - AXIS TRAVEL: 20.1" RAPID TRAVERSE X, Y, Z: 1181, 1181, 1181 IPM CUTTING FEED RATE: .04 - 1181 IPM SPINDLE SPEED: 8,000 RPM SPINDLE TAPER: 50 CT MAIN MOTOR: 50 HP AUTOMATIC TOOL CHANGER: 30 ATC TOOL DIAMETER: 4.7" / 9.4" TOOL LENGTH: 13.7" TOOL WEIGHT: 44 LBS. MACHINE WEIGHT: 17,380 LBS. WORKHOLDING IS NOT INCLUDED

2022 DENVER ACTION MONOBLOC BRIDGE SAW MACHINE MOTORIZED HEAD ROTATION (C AXIS),DRIVEN BY BRUSHLESS MOTOR. HEAD ROTATION IS CONTROLLED AND DISPLAYED ON THE CONTROL PANEL X,Y,Z,C AXES INTERPOLATION WHITE BRUSHLESS MOTORS. PRECISION CONTROL UNIT WITH 21 COLORED TOUCH-SCREEN. PROGRAMMER FOR THE AUTOMATIC WORK CYCLES IN MANUAL / SEMI-AUTOMATIC / AUTOMATIC MODE FOR ORTHOGONAL / DIAGONAL / STEP CUTTING CYCLES ON BOARD TOUCH INTERFACE: LOGITOUCH POWERED BY DDX CAD DOT TO DOT OSAI PROCESS CONTROLLER TO MONITOR PROCESSING AND MACHINE PARAMETERS IMPORT OF SINGLE AND MULTI-LAYER DXF FILE SINGLE SLAB PROCESSING AND MANAGEMENT OF REMAINING PIECES ON SUBSEQUENT SLABS MANUAL AND AUTOMATIC NESTING WITH VEIN MATCHING (BOOK MATCHING) SINGLE OR MULTIPLE, STRAIGHT AND / OR CURVED CUTS WITH CONTINUOUS X, Y, C INTERPOLATION AND Z (POSITIONING ONLY) MANUAL AND AUTOMATIC CUTS STOP PROCESSING WITH SLAB MANUAL MOVEMENT CUT-OUT CYCLE AND / OR INTERNAL CORNERS AND WITH CUTTER AND / OR CORE BIT TOOL PATH SIMULATION WITH VISUALIZATION OF THE WORKBENCH, SLAB AND DISC. GUARD DISC DIAM 500 MM (MIN. DIAM 350 MM) MANUAL HEAD INCLINATION (A AXIS) TILL 90, WITH ADJUSTABLE AND REMOVABLE BACKSTOP AT 45 (+/-1); VARIABLE SPINDLE SPEED FOR DISC MOTOR PENDANT REMOTE CONTROL RED LASER POSITIONED ON THE BLADE GUARD FOR THE INDICATION OF THE CUT LINE CROSS LASER TO EASE THE LOCATION AND STORAGE OF THE ORIGIN POSITION OF THE WORK PIECE AND LINEAR TEMPLATES. NET AND USB PORTS FOR PROGRAM UPDATINGS ELECTRIC WATER VALVE & FLOWMETER TO CONTROL THE WATER SUPPLY HOT ZINC COATED STRUCTURE, FRAME AND TABLE SERVICE WRENCHES, MANUAL GREASING PUMP AND INSTRUCTION BOOKLET Y-AXIS EXTENDED TRAVEL TO 2650MM / 104 HP 17,5 (S6) DISC MOTOR WITH ADJUSTABLE SPINDLE SPEED TILL 6000 RPMS AND INTERCHANGEABLE EASYPIN INSERT WITH 1/2 GAS RIGHT THREAD

MITSUBISHI FG25N-LP FORKLIFT LENGTH TO FORK FACE: 8.37FT IN OVERALL WIDTH: 3.78FT IN OVERALL HEIGHT MAST LOWERED: 7.04FT IN WHEELBASE: 5.25FT IN GROUND CLEARANCE: 4.61IN HEIGHT TO TOP OF OVERHEAD GUARD: 6.91FT IN MAX FORK HEIGHT: 10.96FT IN TURNING RADIUS: 7.32FT IN NUMBER OF CYLINDERS: 4 ENGINE MODEL: GK21E POWER: 53HP TORQUE: 110LB FT POWER MEASURED @: 2700 RPM DISPLACEMENT: 128.2CU IN TORQUE MEASURED @: 2200 RPM OPERATING WEIGHT: 7980.8LB TIRE TYPE: PNEUMATIC MAX SPEED: 11.5MPH TIRE SIZE: 7.0 X 12 12PR ALL SPECIFICATIONS ARE ASSUMED TO BE CORRECT BUT MUST BE CONFIRMED BY THE PURCHASING ENTITY.

2005 GENIE AWP-30S SUPER SERIES AERIAL WORK PLATFORM MAX WORKING HEIGHT: 35 FT 6 IN | 11 M CAPACITY: 350 LB | 159 KG STOWED HEIGHT: 6 FT 6 IN | 1.98 M MACHINE WIDTH: 2 FT 5 IN | 74 CM WEIGHT: 777 LB | 352 KG