MAJOR FOOD CONSIGNMENT AUCTION
Category: CHEMICAL PROCESSING EQUIPMENT
Total Lots:
496
Total Sales:
🔒 Subscribe
Price Distribution
| Year | Make | Model | Lot Description | Hammer Price | |
|---|---|---|---|---|---|
|
INTRALOX |
12" WIDE X 32' LONG STAINLESS STEEL INTRALOX BELT CONVEYOR, VAN DER GRAAF PULLY DRIVE, 6" AND 3" HIGH SIDES, 40" HIGH ELEVATION
|
🔒 Subscribe | ||
|
|
SOLBERN | LFF103 |
SOLBERN LFF103 STRAIGHT LINE LIQUID - FILLER, S/N: 25052, CURRENTLY SET ON 300 X 405 CAN SIZE, 103 POCKETS, TIMING WORM INFEED, LUG CHAIN CONVEYING, FILLER POCKETS SPACED ON 5-1/2" CENTERS, 102" LONG FILL AREA WITH FOUR OVERFLOW SECTIONS, 3" TRI-CLOVER PRODUCT INFEED, STAINLESS STEEL CATCH PAN WITH 4" TRI-CLOVER DISCHARGE, ALL STAINLESS STEEL CONSTRUCTION.
|
🔒 Subscribe | |
|
|
STAINLESS STEEL CENTRIFUGAL PUMP, 3" - TRI-CLOVER INFEED, 1-1/2" TRI-CLOVER DISCHARGE, ELECTRIC MOTOR DRIVE.
|
🔒 Subscribe | |||
|
|
SPIRAX SARCO |
STAINLESS STEEL PICT HEATER AND SPIRAX SARCO CULINARY STEAM FILTER, PICT HEATER IS 6" DIAMETER X 55" LONG, 3" FLANGED STEAM INFEED, 3" TRI-CLOVER INFEED AND DISCHARGE, ALL STAINLESS STEEL CONSTRUCTION, SPIRAX SARCO CULINARY FILTER, 6" DIAMETER X 30" LONG, 3" FLANGED FITTINGS, ALL STAINLESS STEEL CONSTRUCTION.
|
🔒 Subscribe | ||
|
|
INTRALOX |
INTRALOX BELT CONVEYOR, VAN DER GRAAF PULLY DRIVE, 17.5" WIDE X 20' LONG STAINLESS STEEL
|
🔒 Subscribe | ||
|
|
VAN DER GRAAF |
15" WIDE X 28' LONG STAINLESS STEEL BLUE - BELTED CONVEYOR, VAN DER GRAAF PULLY DRIVE, ON CASTERS
|
🔒 Subscribe | ||
|
|
60 GALLON STAINLESS STEEL KETTLE, - 32" DIAMETER X 24" DEEP WITH 10" STRAIGHT WALL, 1-1/2" THREADED CENTER BOTTOM PRODUCT DISCHARGE, 2 EACH 3/4" THREADED STEAM CONNECTIONS, STAINLESS STEEL CONTACT, MILD STEEL JACKET AND FRAME, NO PRESSURE RATING OR MANUFACTURING TAG, 15 PSI MAXIMUM.
|
🔒 Subscribe | |||
|
|
HEINZEN |
HEINZEN SCALE BUCKET WASH STATIONS (5), SET - UP FOR (16) BUCKETS EACH, ALL STAINLESS STEEL, ON CASTERS, AS IS - GOOD CONDITION.
|
🔒 Subscribe | ||
|
|
60 GALLON STAINLESS STEEL STEAM JACKETED KETTLE, 32" DIAMETER X 24" DEEP WITH 10" STRAIGHT WALL, 1-1/2" STRAIGHT PIPE CENTER BOTTOM PRODUCT DISCHARGE, 1" THREADED STEAM CONNECTION, 1" STRAIGHT PIPE CONDENSATE DISCHARGE, STAINLESS STEEL CONTACT AND JACKET, NO PRESSURE RATING OR MANUFACTURING PLATE, 15 PSI MAXIMUM, NON ASME WELDED LEGS AND 2 DENTS.
|
🔒 Subscribe | |||
|
|
INTRALOX |
INTRALOX 16" WIDE X 16'6" LONG STAINLESS STEEL BELT CONVEYOR, 7.5HP STAINLESS STEEL GEARHEAD DRIVE
|
🔒 Subscribe | ||
|
|
1959 | GROEN | N60 |
1959 GROEN N60 60 GALLON STAINLESS STEEL STEAM - JACKETED KETTLE, S/N: 58429A, 30" DIAMETER X 25" DEEP WITH 10" STRAIGHT WALL, MAXIMUM ALLOWABLE WORKING PRESSURE 100 PSI, 2" THREADED CENTER BOTTOM PRODUCT DISCHARGE, 3 EACH 3/4" THREADED STEAM CONNECTIONS, ALL STAINLESS STEEL CONSTRUCTION.
|
🔒 Subscribe |
|
|
BUNTING MAGNETICS CO. |
BUNTING MAGNETICS CO. MAGNETIC ELEVATOR, 4" WIDE X 99" LONG MAGNETIC ZONE, 60" TOTAL ELEVATION CHANGE, 2 HP ELECTRIC MOTOR GEARHEAD DRIVE, 1725 RPM, WIRED 208-230/1/60, AVAILABLE AT 50 HZ, ALL STAINLESS STEEL CONSTRUCTION. S/N: 9080578-8X01
|
🔒 Subscribe | ||
|
|
STAINLESS STEEL HYDRAULIC BIN DUMPER, - CAPABLE OF HANDLING 52" WIDE X 46-1/2" TALL MAXIMUM BINS, 38" DUMP BAY DEPTH, 25" BIN INFEED HEIGHT, 78" BIN DUMPING HEIGHT, STAINLESS STEEL CONTACT, STAINLESS AND MILD STEEL CONSTRUCTION, REQUIRES CONTROLS.
|
🔒 Subscribe | |||
|
|
BIOSAFE SYSTEMS | QS-AN3607 |
BIOSAFE SYSTEMS QS-AN3607 36" WIDE - X 90" LONG STAINLESS STEEL FOGGING CONVEYOR, OPEN WIRE GRID CONVEYOR, WITH HIGH PRESSURE PUMP AND PLASTIC AIR PUMP, WITH CATCH PAN, CONTROLS AND A 90V DC VARIABLE SPEED DRIVE, MISSING TOP HOOD, S/N: 11458
|
🔒 Subscribe | |
|
|
1958 | LEE |
1958 LEE 60 GALLON STAINLESS STEEL KETTLE S/N: 298M, 32" DIAMETER X 24" DEEP WITH 10" STRAIGHT WALL, 90 PSI AT 330 DEGREES FAHRENHEIT MAXIMUM ALLOWABLE WORKING PRESSURE, 1-1/2" THREADED CENTER BOTTOM PRODUCT DISCHARGE, 2 EACH 3/4" THREADED STEAM CONNECTIONS, STAINLESS STEEL CONTACT, MILD STEEL FRAME.
|
🔒 Subscribe | |
|
|
36" WIDE X 23'4" LONG FLIGHTED BLACK RUBBER - RECEIVING ELEVATOR, 4" FLIGHTS ON 12" CENTERS, CHAIN DRIVE MOTOR, AS IS - FAIR CONDITION.
|
🔒 Subscribe | |||
|
|
LIFTO-WEST | LOM-4 |
LIFTO-WEST LOM-4 FORKLIFT MOUNTED 4 - DRUM HANDLER, FITS ALL CONVENTIONAL RIMMED STEEL, PLASTIC AND FIBER DRUMS, CAPABLE OF HANDLING UP TO 4 DRUMS AT A TIME, MILD STEEL CONSTRUCTION.
|
🔒 Subscribe | |
|
|
GROVEDALE |
GROVEDALE 18" WIDE X 11' LONG GROVEDALE STAINLESS STEEL DISTRIBUTION CONVEYOR, RUBBER BELT, 2 PRODUCT DISCHARGES, HYDRAULICALLY DRIVEN, ALL STAINLESS STEEL CONSTRUCTION.
|
🔒 Subscribe | ||
|
|
FAVA |
FAVA 18" WIDE X 104" LONG STAINLESS STEEL - INCLINE CONVEYOR, 46-1/2" PRODUCT INFEED HEIGHT, 60" PRODUCT DISCHARGE HEIGHT, 2" MAXIMUM PRODUCT HEIGHT, THERMOPLASTIC BELTING, 1/2 HP ELECTRIC MOTOR GEARHEAD BELT DRIVE, 1725 RPM, WIRED 115/230/1/60, STAINLESS STEEL CONTACT, STAINLESS AND MILD STEEL CONSTRUCTION.
|
🔒 Subscribe | ||
|
|
URSCHEL | H |
URSCHEL H DICER, 10" - DIAMETER IMPELLER INFEED, 1/2" CIRCULAR 15-1/2" WIDE X 19-1/2" LONG INFEED HOPPER, 40" INFEED HEIGHT, 2 HP ELECTRIC MOTOR BELT DRIVE, 1715 RPM, WIRED 230/460/3/60, STAINLESS STEEL CONTACT, BRONZE AND STAINLESS STEEL CONSTRUCTION, REQUIRED INFEED AND CROSS CUT. S/N: 595
|
🔒 Subscribe | |
|
|
URSCHEL | H-A |
URSCHEL H-A DICER, 10" - DIAMETER IMPELLER INFEED, CURRENTLY SET ON 1/2" DICE WITH URSCHEL MODEL G 1/2" CROSS CUT, 15-1/2" WIDE X 19-1/2" LONG INFEED HOPPER, 40" INFEED HEIGHT, 2 HP ELECTRIC MOTOR BELT DRIVE, 1715 RPM, WIRED 230/460/3/60, STAINLESS STEEL CONTACT, BRONZE AND STAINLESS STEEL CONSTRUCTION. S/N: 595
|
🔒 Subscribe | |
|
|
4" WIDE X 132" LONG RUBBER BELT - BI-DIRECTIONAL CONVEYOR, ADJUSTABLE LEGS BUT CURRENTLY SET ON 26-1/2" PRODUCT INFEED HEIGHT, 35" PRODUCT DISCHARGE HEIGHT, CHAIN DRIVEN, ALL STAINLESS STEEL CONSTRUCTION, REQUIRES DRIVE.
|
🔒 Subscribe | |||
|
|
GROEN |
60 GALLON GROEN STAINLESS STEEL STEAM - JACKETED KETTLE 30" DIAMETER X 25" DEEP WITH 10" STRAIGHT WALL, 40 PSI MAXIMUM ALLOWABLE WORKING PRESSURE, 1-1/2" STRAIGHT PIPE CENTER BOTTOM PRODUCT DISCHARGE, 3 EACH 3/4" THREADED STEAM CONNECTIONS, STAINLESS STEEL CONTACT, MILD STEEL FRAME. S/N: 11481
|
🔒 Subscribe | ||
|
|
CMI |
DUAL CMI STAINLESS STEEL BLOWERS, 6" INLETS, - 10HP 3500 RPM DIRECT DRIVES, STAINLESS STEEL MOTORS, 208-230/460/3/60
|
🔒 Subscribe | ||
|
|
150 GALLON STAINLESS STEEL VERTICAL TANK, 36" - DIAMETER X 36" TALL, FLAT TOP WITH HINGED COVER, TAPERED BOTTOM WITH A 2" CENTER BOTTOM DISCHARGE, DISCHARGES TO BOTH A HAND GATE VALVE AND A 2"X1.5" STAINLESS STEEL CENTRIFUGAL PUMP, 0.5HP, 230/460/3/60, SET UP WITH A VULCAN INTERNALLY MOUNTED ELECTRIC HEATER, TANK MOUNTED ON CASTERS, 76" OVERALL HEIGHT
|
🔒 Subscribe | |||
|
|
2015 | M&S AUTOMATION | TP00914 |
2015 M&S AUTOMATION TP00914 ROTARY - UNSCRAMBLER, 52" DIAMETER TABLE WITH DRIVEN DISC AND RIM, SINGLE FIL DISCHARGE TO A 4" WIDE X 36" LONG BELT TRANSFERRING TO A DUAL LANER WITH (2) 4" WIDE X 27" LONG BELTS, DISCHARGES INTO (2) BUCKETS WITH PNEUMATIC DISCHARGE GATES, WITH DRIVES AND CONTROLS, RATED TO 300 PPM, RIM SET AT 46RPM AND DISC SET AT 55 RPM
|
🔒 Subscribe |
|
|
2018 | QUINCY | QED-500 |
2018 QUINCY QED-500 REFRIGERANT AIR DRYER, - R410A REFRIGERANT, 460/3/60, PRODUCT NUMBER 8102809525, S/N: CAQ783463. UNIT COMES WITH A QUINCY MODEL QMD-550 REFRIGERANT AIR DRYER, PRODUCT NUMBER 550-HE-40-115V, S/N: AP1246601, BOTH UNITS HAVE TOUCH SCREEN CONTROLS AND DAMAGED CABINETS, AS IS - FAIR CONDITION.
|
🔒 Subscribe |
|
|
GOULDS | JO 1.5X2-8 |
GOULDS JO 1.5X2-8 STAINLESS STEEL CENTRIFUGAL PUMP S/N: 438AD85, 2" FLANGED PRODUCT INFEED, 1-1/2" FLANGED PRODUCT DISCHARGE, RATED FOR 70 GPM AT 75' HEAD PRESSURE, 32.5 PSI, 5 HP ELECTRIC MOTOR DIRECT DRIVE, 1750 RPM, WIRED 230/460/3/60, STAINLESS STEEL CONTACT, MILD STEEL BASE.
|
🔒 Subscribe | |
|
|
FMC | 75B |
FMC 75B SCREW EXTRACTOR, S/N: HC-1160 - 14" DIAMETER SCREW, TAPERED FLIGHTS, 11" WIDE X 27" LONG PRODUCT INFEED HOPPER, 50-1/2" PRODUCT INFEED HEIGHT, STAINLESS STEEL PRODUCT CATCH PAN WITH 4" THREADED PRODUCT DISCHARGE, PNEUMATICALLY CONTROLLED PUMICE DISCHARGE CONE, 6" WIDE X 19-1/2" LONG PUMICE DISCHARGE CHUTE, BELT DRIVEN, STAINLESS STEEL CONTACT, MILD STEEL FRAME, REQUIRES TOP COVER, INNER SCREENS, AND DRIVE.
|
🔒 Subscribe | |
|
|
ZERO MFG. CO. | ANV150 |
ZERO MFG. CO. ANV150 150 GALLON JACKETED STAINLESS - STEEL TANK, S/N: H-19-0-66, 38" DIAMETER X 54" LONG, 1-1/2" THREADED TANGENTIAL CENTER BOTTOM DISCHARGE WITH VALVE AND TRI-CLOVER ADAPTER, 3" DIAMETER STRAIGHT PIPE SIDE TOP CONNECTION, 18" DIAMETER MANHOLE, 2 EACH 1/2" THREADED COPPER JACKET CONNECTIONS, REMOVABLE DEPTH INDICATOR, STAINLESS STEEL CONTACT, MILD STEEL CONSTRUCTION, REQUIRES MANHOLE LID.
|
🔒 Subscribe | |
|
|
4-1/2" WIDE X 150" LONG STAINLESS STEEL - TABLE TOP CONVEYOR, 32" CONTAINER INFEED AND DISCHARGE HEIGHT, 5 HP STAINLESS STEEL ELECTRIC MOTOR GEARHEAD DRIVE, 1765 RPM, WIRED 208-230/460/3/60, ALL STAINLESS STEEL CONSTRUCTION, REQUIRES TAIL SPROCKET AND BELT.
|
🔒 Subscribe | |||
|
|
GRAHAM CORPORATION | 9XF-14 |
GRAHAM CORPORATION 9XF-14 HELIFLOW HEAT EXCHANGER S/N: 05-63018-1, 65 PSI AT 350 DEGREES FAHRENHEIT MAXIMUM ALLOWABLE WORKING PRESSURE AND TEMPERATURE FOR SHELL, 200 PSI AT 400 DEGREES FAHRENHEIT MAXIMUM ALLOWABLE WORKING PRESSURE FOR TUBES, HEATING/COOLING MEDIUM IN TUBES, PRODUCT IN SHELL, 1-1/4" THREADED HEATING MEDIUM INFEED AND DISCHARGE, 1-1/4" THREADED PRODUCT INFEED AND DISCHARGE, APPROXIMATELY 800 SQUARE INCHES HEAT TRANSFER SURFACE AREA, COPPER TUBES, COUNTER CURRENT FLOW DESIGN, MILD STEEL CONSTRUCTION.
|
🔒 Subscribe | |
|
|
GRAHAM CORPORATION | 8WXF-12 |
GRAHAM CORPORATION 8WXF-12 HELIFLOW HEAT EXCHANGER S/N: 06-63880-4, 100 PSI AT 350 DEGREES FAHRENHEIT MAXIMUM ALLOWABLE WORKING PRESSURE AND TEMPERATURE FOR SHELL, 267 PSI AT 400 DEGREES FAHRENHEIT MAXIMUM ALLOWABLE WORKING PRESSURE FOR TUBES, HEATING/COOLING MEDIUM IN TUBES, PRODUCT IN SHELL, 1-1/4" THREADED HEATING MEDIUM INFEED AND DISCHARGE, 1" THREADED PRODUCT INFEED AND DISCHARGE, APPROXIMATELY 800 SQUARE INCHES HEAT TRANSFER SURFACE AREA, COPPER TUBES, COUNTER CURRENT FLOW DESIGN, MILD STEEL CONSTRUCTION.
|
🔒 Subscribe | |
|
|
GRAHAM CORPORATION | 8WXF-12 |
GRAHAM CORPORATION 8WXF-12 HELIFLOW HEAT EXCHANGER S/N: 06-63880-3, 100 PSI AT 350 DEGREES FAHRENHEIT MAXIMUM ALLOWABLE WORKING PRESSURE AND TEMPERATURE FOR SHELL, 267 PSI AT 400 DEGREES FAHRENHEIT MAXIMUM ALLOWABLE WORKING PRESSURE FOR TUBES, HEATING/COOLING MEDIUM IN TUBES, PRODUCT IN SHELL, 1-1/4" THREADED HEATING MEDIUM INFEED AND DISCHARGE, 1" THREADED PRODUCT INFEED AND DISCHARGE, APPROXIMATELY 800 SQUARE INCHES HEAT TRANSFER SURFACE AREA, COPPER TUBES, COUNTER CURRENT FLOW DESIGN, MILD STEEL CONSTRUCTION.
|
🔒 Subscribe | |
|
|
1000 GALLON FIBERGLASS NEUTRALIZATION TANK, - 72" DIAMETER X 62" DEEP, 1 EACH 4" FLANGED SIDE TOP PRODUCT INFEED, 1 EACH 3" FLANGED PRODUCT DISCHARGE CONNECTION WITH 3" TRI-CLOVER ADAPTER, 1 EACH 3" FLANGED SIDE BOTTOM PRODUCT DISCHARGE WITH 2-1/2" TRI-CLOVER ADAPTER, 24" DIAMETER SIDE TOP MANHOLE, VARIOUS THREADED CONNECTIONS, FIBERGLASS CONSTRUCTION, ON STAINLESS STEEL LEGS.
|
🔒 Subscribe | |||
|
|
GRAHAM CORPORATION | 8WXF-12 |
GRAHAM CORPORATION 8WXF-12 HELIFLOW HEAT EXCHANGER S/N: 04-58751-2, 100 PSI AT 350 DEGREES FAHRENHEIT MAXIMUM ALLOWABLE WORKING PRESSURE AND TEMPERATURE FOR SHELL, 267 PSI AT 400 DEGREES FAHRENHEIT MAXIMUM ALLOWABLE WORKING PRESSURE FOR TUBES, HEATING/COOLING MEDIUM IN TUBES, PRODUCT IN SHELL, 1-1/4" THREADED HEATING MEDIUM INFEED AND DISCHARGE, 1" THREADED PRODUCT INFEED AND DISCHARGE, APPROXIMATELY 800 SQUARE INCHES HEAT TRANSFER SURFACE AREA, COPPER TUBES, COUNTER CURRENT FLOW DESIGN, MILD STEEL CONSTRUCTION.
|
🔒 Subscribe | |
|
|
D&K |
D&K 10' WIDE METAL BRAKE, AS IS - - FAIR CONDITION.
|
🔒 Subscribe | ||
|
|
30" WIDE X 20' LONG GREEN BELTED CONVEYOR - WITH SORT OUTS, GEARHEAD CHAIN DRIVE, MILD STEEL AND STAINLESS STEEL FRAME
|
🔒 Subscribe | |||
|
|
COZZINI |
COZZINI 2 COMPARTMENT STAINLESS STEEL - STRAINER TANK, 36" WIDE X 24" LONG X 16" DEEP WASH MAIN COMPARTMENT, 2 EACH 16" WIDE X 20" LONG X 12" DEEP HINGED BASKETS, 3/32" DIAMETER PERFORATIONS, 32" PRODUCT INFEED HEIGHT, 3/4" DIAMETER X 36" LONG MANIFOLD WITH 2 EACH 3/4" DIAMETER THREADED NOZZLE CONNECTIONS, BASKETS DUMP INTO 26" WIDE X 18" LONG X 16" DEEP COMPARTMENT, 2 EACH 1-1/2" THREADED END BOTTOM DRAINS WITH BALL VALVE, EACH COMPARTMENT SLIGHTLY SLOPED TO DRAIN, ALL STAINLESS STEEL CONSTRUCTION.
|
🔒 Subscribe | ||
|
|
STAINLESS STEEL HOT WATER GENERATOR (HOT SET), - 1" THREADED STEAM INLET WITH 3/4" ADAPTOR, 1-1/2" HOT WATER INFEED AND DISCHARGE TRI CLOVER CONNECTIONS, 1/2" THREADED COLD WATER MAKE UP CONNECTION, KAYE & MACDONALD INC. STEAM REGULATOR, MOD. SA 101, S/N 2G-088, W.E. ANDERSON CONTROL VALVE, MODEL LIN-E-AIR, S/N 2001VA32230, 2 EACH KUNKLE SAFETY RELIEF VALVES, VALVE ON STEAM SIDE SET TO 8 PSI, VALVE ON WATER SIDE SET TO 100 PSI, 2" HOT WATER THREADED INFEED X 1-1/2" HOT WATER THREADED DISCHARGE, 2 HP ELECTRIC MOTOR DIRECT DRIVE, 3450 RPM, WIRED 208-230/460/3/60, ALL STAINLESS STEEL CONSTRUCTION, ON FRAME WITH CASTERS.
|
🔒 Subscribe | |||
|
|
A. B. MCLAUCHLAN |
A. B. MCLAUCHLAN 6" WIDE X 96" LONG STAINLESS - STEEL TABLE TOP CONVEYOR S/N: 2837, 37-1/2" CONTAINER INFEED AND DISCHARGE HEIGHT, 3/4 HP ELECTRIC MOTOR GEARHEAD CHAIN DRIVE, 1725 RPM, WIRED 230/460/3/60, ALL STAINLESS STEEL CONSTRUCTION.
|
🔒 Subscribe | ||
|
|
STAINLESS STEEL SLOT FILLER, FULLY - ADJUSTABLE BUT CURRENTLY SET ON 300 CAN DIAMETER, 5-1/2" MAXIMUM CONTAINER HEIGHT, 19-1/2" WIDE X 18" LONG PRODUCT FILL PLATE, 47-1/2" PRODUCT INFEED HEIGHT, 24" WIDE X 52-1/2" LONG X 16" DEEP PRODUCT CATCH BASIN, 3" TRI-CLOVER SIDE BOTTOM DISCHARGE, 5/8" WIDE X 12' LONG TRAPEZOIDAL BELT CONTAINER CONVEYOR, 3-1/4" WIDE CONVEYOR FRAME, 35-1/2" INFEED AND DISCHARGE HEIGHT, BOTTOM MOUNTED BELT CLEANER, 1/2" CLEANING WATER INFEED, 1-1/2" TRI-CLOVER DRAIN, 3/4 HP ELECTRIC MOTOR GEARHEAD CHAIN DRIVE FILL RATE ADJUSTMENT, 1725 RPM, WIRED 230/460/3/60, ALL STAINLESS STEEL CONSTRUCTION.
|
🔒 Subscribe | |||
|
|
RIETZ | RA2-12-K122 |
RIETZ RA2-12-K122 DISINTEGRATOR, 12" DIAMETER X 6-1/4" DEEP SCREEN, 0.023 SCREEN PERFORATION WITH 3/8" BACKING SCREEN, CURRENTLY INSTALLED WITH 10 EACH HAMMERS, 40 HP ELECTRIC MOTOR BELT DRIVE, 1775 RPM, WIRED 230/460/3/60, ALL STAINLESS STEEL CONSTRUCTION, REQUIRES HOPPER INFEED AND NEW 2-1/2" TRI-CLOVER PRODUCT DISCHARGE. S/N: RA-85001392-4
|
🔒 Subscribe | |
|
|
INGERSOLL RAND | 20 HP |
INGERSOLL RAND 20 HP AIR COMPRESSOR, 1-1/4" - THREADED COMPRESSED AIR DISCHARGE, 20 HP ELECTRIC MOTOR BELT DRIVE, 1750 RPM, WIRED 230/460/3/60, AVAILABLE AT 50 HZ, CAST IRON CONSTRUCTION, STAINLESS STEEL FRAME.
|
🔒 Subscribe | |
|
|
LITTLE SQUIRT | LS-10H |
LITTLE SQUIRT LS-10H HOT MELT GLUER, 2-LINE, NO GLUE HEADS, 115-1-60, S/N 75806-0004
|
🔒 Subscribe | |
|
|
2000 | SASIB MANZINI | B-115:5220 |
2000 SASIB MANZINI B-115:5220 ASEPTIC POSITIVE DISPLACEMENT - PUMP S/N: 38098, 1-1/2" THREADED PRODUCT INFEED, 1-1/2" THREADED PRODUCT DISCHARGE, 3-1/2 HP ELECTRIC MOTOR GEARHEAD DRIVE, WIRED 480/3/60, ALL STAINLESS STEEL CONSTRUCTION, ON FRAME.
|
🔒 Subscribe |
|
|
PROTEC | PRO-8-1200-SP |
PROTEC PRO-8-1200-SP REVERSE OSMOSIS FILTER - SYSTEM, 8" DIAMETER X 62" LONG FILTER BODY, 1200 PSI MAXIMUM OPERATING PRESSURE, TEMPERATURE RANGE BETWEEN 20 DEGREES FAHRENHEIT TO 120 DEGREES FAHRENHEIT, CAT MODEL 2511 HIGH PRESSURE WASHDOWN PUMP, 20 GPM AT 1500 PSI, 2" THREADED INFEED, 3/4" THREADED DISCHARGE, 20 HP ELECTRIC MOTOR BELT DRIVE, 1750 RPM, WIRED 230/460/3/60, STAINLESS STEEL CONSTRUCTION, ON CASTERS.
|
🔒 Subscribe | |
|
|
DUPONT | PERMASEP PERMEATORS MODEL B-10 |
DUPONT PERMASEP PERMEATORS MODEL B-10 REVERSE - OSMOSIS FILTER SYSTEM S/N: 2160027, 6" DIAMETER X 50" LONG FILTER BODY, MEYERS HIGH PRESSURE WASHDOWN PUMP, MOD. CX10-15 SST, S/N 4884, 1-1/2" THREADED FITTINGS, 35 GALLON HOPPER, 15" WIDE X 30" LONG X 18" DEEP, 3/4" TRI-CLOVER SIDE DISCHARGE, 1" TRI-CLOVER SIDE BOTTOM DISCHARGE, WITH 1" DIAMETER X 48" LONG TUBE IN TUBE HEAT EXCHANGER, 1" INNER TUBE, 1-1/2" OUTER TUBE, APPROXIMATELY 200 SQUARE INCHES OF HEAT TRANSFER SURFACE AREA, 15 HP ELECTRIC MOTOR BELT DRIVE, 1750 RPM, WIRED 230/460/3/60, STAINLESS STEEL CONSTRUCTION, ON CASTERS.
|
🔒 Subscribe | |
|
|
COKER | 2000 |
COKER 2000 CENTRIFUGAL PUMP, 4" FLANGED INFEED, 3" FLANGED DISCHARGE, MILD STEEL CONSTRUCTION, REQUIRES DRIVE. S/N: 9199405
|
🔒 Subscribe | |
|
|
EL NICKELL, ALFA-LAVAL, SUMMIT |
EL NICKELL AMMONIA RECEIVER WITH ALFA-LAVAL HEAT EXCHANGER, 250PSI, WITH A SUMMIT PUMP, NATIONAL BOARD NUMBER 46813, AS IS - FAIR CONDITION.
|
🔒 Subscribe |
INTRALOX
12" WIDE X 32' LONG STAINLESS STEEL INTRALOX BELT CONVEYOR, VAN DER GRAAF PULLY DRIVE, 6" AND 3" HIG...
SOLBERN LFF103
SOLBERN LFF103 STRAIGHT LINE LIQUID - FILLER, S/N: 25052, CURRENTLY SET ON 300 X 405 CAN SIZE, 103 P...
STAINLESS STEEL CENTRIFUGAL PUMP, 3" - TRI-CLOVER INFEED, 1-1/2" TRI-CLOVER DISCHARGE, ELECTRIC MOTO
SPIRAX SARCO
STAINLESS STEEL PICT HEATER AND SPIRAX SARCO CULINARY STEAM FILTER, PICT HEATER IS 6" DIAMETER X 55"...
INTRALOX
INTRALOX BELT CONVEYOR, VAN DER GRAAF PULLY DRIVE, 17.5" WIDE X 20' LONG STAINLESS STEEL...
VAN DER GRAAF
15" WIDE X 28' LONG STAINLESS STEEL BLUE - BELTED CONVEYOR, VAN DER GRAAF PULLY DRIVE, ON CASTERS...
60 GALLON STAINLESS STEEL KETTLE, - 32" DIAMETER X 24" DEEP WITH 10" STRAIGHT WALL, 1-1/2" THREADED
HEINZEN
HEINZEN SCALE BUCKET WASH STATIONS (5), SET - UP FOR (16) BUCKETS EACH, ALL STAINLESS STEEL, ON CAST...
60 GALLON STAINLESS STEEL STEAM JACKETED KETTLE, 32" DIAMETER X 24" DEEP WITH 10" STRAIGHT WALL, 1-1
INTRALOX
INTRALOX 16" WIDE X 16'6" LONG STAINLESS STEEL BELT CONVEYOR, 7.5HP STAINLESS STEEL GEARHEAD DRIVE...
1959 GROEN N60
1959 GROEN N60 60 GALLON STAINLESS STEEL STEAM - JACKETED KETTLE, S/N: 58429A, 30" DIAMETER X 25" DE...
BUNTING MAGNETICS CO.
BUNTING MAGNETICS CO. MAGNETIC ELEVATOR, 4" WIDE X 99" LONG MAGNETIC ZONE, 60" TOTAL ELEVATION CHANG...
STAINLESS STEEL HYDRAULIC BIN DUMPER, - CAPABLE OF HANDLING 52" WIDE X 46-1/2" TALL MAXIMUM BINS, 38
BIOSAFE SYSTEMS QS-AN3607
BIOSAFE SYSTEMS QS-AN3607 36" WIDE - X 90" LONG STAINLESS STEEL FOGGING CONVEYOR, OPEN WIRE GRID CON...
1958 LEE
1958 LEE 60 GALLON STAINLESS STEEL KETTLE S/N: 298M, 32" DIAMETER X 24" DEEP WITH 10" STRAIGHT WALL,...
36" WIDE X 23'4" LONG FLIGHTED BLACK RUBBER - RECEIVING ELEVATOR, 4" FLIGHTS ON 12" CENTERS, CHAIN D
LIFTO-WEST LOM-4
LIFTO-WEST LOM-4 FORKLIFT MOUNTED 4 - DRUM HANDLER, FITS ALL CONVENTIONAL RIMMED STEEL, PLASTIC AND ...
GROVEDALE
GROVEDALE 18" WIDE X 11' LONG GROVEDALE STAINLESS STEEL DISTRIBUTION CONVEYOR, RUBBER BELT, 2 PRODUC...
FAVA
FAVA 18" WIDE X 104" LONG STAINLESS STEEL - INCLINE CONVEYOR, 46-1/2" PRODUCT INFEED HEIGHT, 60" PRO...
URSCHEL H
URSCHEL H DICER, 10" - DIAMETER IMPELLER INFEED, 1/2" CIRCULAR 15-1/2" WIDE X 19-1/2" LONG INFEED HO...
URSCHEL H-A
URSCHEL H-A DICER, 10" - DIAMETER IMPELLER INFEED, CURRENTLY SET ON 1/2" DICE WITH URSCHEL MODEL G ...
4" WIDE X 132" LONG RUBBER BELT - BI-DIRECTIONAL CONVEYOR, ADJUSTABLE LEGS BUT CURRENTLY SET ON 26-1
GROEN
60 GALLON GROEN STAINLESS STEEL STEAM - JACKETED KETTLE 30" DIAMETER X 25" DEEP WITH 10" STRAIGHT WA...
CMI
DUAL CMI STAINLESS STEEL BLOWERS, 6" INLETS, - 10HP 3500 RPM DIRECT DRIVES, STAINLESS STEEL MOTORS, ...
150 GALLON STAINLESS STEEL VERTICAL TANK, 36" - DIAMETER X 36" TALL, FLAT TOP WITH HINGED COVER, TAP
2015 M&S AUTOMATION TP00914
2015 M&S AUTOMATION TP00914 ROTARY - UNSCRAMBLER, 52" DIAMETER TABLE WITH DRIVEN DISC AND RIM, SINGL...
2018 QUINCY QED-500
2018 QUINCY QED-500 REFRIGERANT AIR DRYER, - R410A REFRIGERANT, 460/3/60, PRODUCT NUMBER 8102809525,...
GOULDS JO 1.5X2-8
GOULDS JO 1.5X2-8 STAINLESS STEEL CENTRIFUGAL PUMP S/N: 438AD85, 2" FLANGED PRODUCT INFEED, 1-1/2" F...
FMC 75B
FMC 75B SCREW EXTRACTOR, S/N: HC-1160 - 14" DIAMETER SCREW, TAPERED FLIGHTS, 11" WIDE X 27" LONG PRO...
ZERO MFG. CO. ANV150
ZERO MFG. CO. ANV150 150 GALLON JACKETED STAINLESS - STEEL TANK, S/N: H-19-0-66, 38" DIAMETER X 54" ...
4-1/2" WIDE X 150" LONG STAINLESS STEEL - TABLE TOP CONVEYOR, 32" CONTAINER INFEED AND DISCHARGE HEI
GRAHAM CORPORATION 9XF-14
GRAHAM CORPORATION 9XF-14 HELIFLOW HEAT EXCHANGER S/N: 05-63018-1, 65 PSI AT 350 DEGREES FAHRENHEIT ...
GRAHAM CORPORATION 8WXF-12
GRAHAM CORPORATION 8WXF-12 HELIFLOW HEAT EXCHANGER S/N: 06-63880-4, 100 PSI AT 350 DEGREES FAHRENHEI...
GRAHAM CORPORATION 8WXF-12
GRAHAM CORPORATION 8WXF-12 HELIFLOW HEAT EXCHANGER S/N: 06-63880-3, 100 PSI AT 350 DEGREES FAHRENHEI...
1000 GALLON FIBERGLASS NEUTRALIZATION TANK, - 72" DIAMETER X 62" DEEP, 1 EACH 4" FLANGED SIDE TOP PR
GRAHAM CORPORATION 8WXF-12
GRAHAM CORPORATION 8WXF-12 HELIFLOW HEAT EXCHANGER S/N: 04-58751-2, 100 PSI AT 350 DEGREES FAHRENHEI...
D&K
D&K 10' WIDE METAL BRAKE, AS IS - - FAIR CONDITION....
30" WIDE X 20' LONG GREEN BELTED CONVEYOR - WITH SORT OUTS, GEARHEAD CHAIN DRIVE, MILD STEEL AND STA
COZZINI
COZZINI 2 COMPARTMENT STAINLESS STEEL - STRAINER TANK, 36" WIDE X 24" LONG X 16" DEEP WASH MAIN COMP...
STAINLESS STEEL HOT WATER GENERATOR (HOT SET), - 1" THREADED STEAM INLET WITH 3/4" ADAPTOR, 1-1/2" H
A. B. MCLAUCHLAN
A. B. MCLAUCHLAN 6" WIDE X 96" LONG STAINLESS - STEEL TABLE TOP CONVEYOR S/N: 2837, 37-1/2" CONTAINE...
STAINLESS STEEL SLOT FILLER, FULLY - ADJUSTABLE BUT CURRENTLY SET ON 300 CAN DIAMETER, 5-1/2" MAXIMU
RIETZ RA2-12-K122
RIETZ RA2-12-K122 DISINTEGRATOR, 12" DIAMETER X 6-1/4" DEEP SCREEN, 0.023 SCREEN PERFORATION WITH 3/...
INGERSOLL RAND 20 HP
INGERSOLL RAND 20 HP AIR COMPRESSOR, 1-1/4" - THREADED COMPRESSED AIR DISCHARGE, 20 HP ELECTRIC MOTO...
LITTLE SQUIRT LS-10H
LITTLE SQUIRT LS-10H HOT MELT GLUER, 2-LINE, NO GLUE HEADS, 115-1-60, S/N 75806-0004...
2000 SASIB MANZINI B-115:5220
2000 SASIB MANZINI B-115:5220 ASEPTIC POSITIVE DISPLACEMENT - PUMP S/N: 38098, 1-1/2" THREADED PRODU...
PROTEC PRO-8-1200-SP
PROTEC PRO-8-1200-SP REVERSE OSMOSIS FILTER - SYSTEM, 8" DIAMETER X 62" LONG FILTER BODY, 1200 PSI M...
DUPONT PERMASEP PERMEATORS MODEL B-10
DUPONT PERMASEP PERMEATORS MODEL B-10 REVERSE - OSMOSIS FILTER SYSTEM S/N: 2160027, 6" DIAMETER X 50...
COKER 2000
COKER 2000 CENTRIFUGAL PUMP, 4" FLANGED INFEED, 3" FLANGED DISCHARGE, MILD STEEL CONSTRUCTION, REQUI...
EL NICKELL, ALFA-LAVAL, SUMMIT
EL NICKELL AMMONIA RECEIVER WITH ALFA-LAVAL HEAT EXCHANGER, 250PSI, WITH A SUMMIT PUMP, NATIONAL BOA...