Laboratory Pharmaceutical Equipment Auction
Category: PHARMACEUTICAL MANUFACTURING EQUIPMENT
Total Lots:
190
Total Sales:
🔒 Subscribe
Lot Price Distribution
| Year | Make | Model | Lot Description | Hammer Price | |
|---|---|---|---|---|---|
|
SIMCO | GEMINI |
SIMCO GEMINI PROFILE EMITTER MODULE SYSTEM - LOT OF 5. FEATURES INCLUDE MULTIPLE OPERATION MODES, QUIET PERFORMANCE, AND CLEAN ROOM/LAB COMPATABILITY.
|
🔒 Subscribe | |
|
|
SIMCO | GEMINI |
SIMCO GEMINI PROFILE EMITTER MODULE SYSTEM - LOT OF 5. FEATURES INCLUDE MULTIPLE OPERATION MODES, QUIET PERFORMANCE, AND CLEAN ROOM/LAB COMPATABILITY.
|
🔒 Subscribe | |
|
|
KQ INTEGRATED SOLUTIONS | ION MAX SOURCE 80000-60315 |
USED IONIZER FROM KQ INTEGRATED SOLUTIONS. FEATURES OF THIS MASS SPECTROMETRY SOURCE INCLUDE A HEATED PROBE WHICH ALLOWS FOR EXCEPTIONAL IONIZATION AND RESULTS.
|
🔒 Subscribe | |
|
|
GENEMACHINES | HYDRO-SHEAR |
2000 HYDRO-SHEAR LABORATORY DNA FRAGMENTATION SYSTEM - USED DNA SHEARING UNIT FROM GENEMACHINES. FEATURES OF THE HYDROSHEAR UNIT INCLUDE THE ABILITY TO USE SAMPLE SIZES DOWN TO 40UL TO PRODUCE CONSISTENT AND REPEATABLE RESULTS.
|
🔒 Subscribe | |
|
|
SIMCO | GEMINI |
SIMCO GEMINI PROFILE EMITTER MODULE SYSTEM - LOT OF 5 EMITTER MODULES. FEATURES INCLUDE MULTIPLE OPERATION MODES, QUIET PERFORMANCE, AND CLEAN ROOM/LAB COMPATIBILITY.
|
🔒 Subscribe | |
|
|
FISHERBRAND | ISOTEMP |
FISHERBRAND ISOTEMP UNDERCOUNTER REFRIGERATOR. OVERALL DIMENSIONS: LENGTH:23.5 INCHES WIDTH: 24 INCHES HEIGHT: 32.5 INCHES ELECTRICAL REQUIREMENTS: 60 HERTZ, 1 PHASE, 115 VAC
|
🔒 Subscribe | |
|
|
SHEL LAB | W20M |
2018 SHELDON H2O BATH SERIES W20M WATER BATH - 18 LITER CAPACITY, STAINLESS STEEL CONSTRUCTION, AND AN ADJUSTABLE OVER TEMP SAFETY. S/N: 9021187
|
🔒 Subscribe | |
|
|
QUIDEL | SOFIA 2 |
2023 QUIDEL SOFIA 2 IMMUNOASSAY ANALYZER. QUIDEL SOFIA 2 IS AN ADVANCED IMMUNOASSAY BENCHTOP ANALYZER BUILT WITH FLUORESCENCE TECHNOLOGY DETECTION VIA AN ULTRAVIOLET LED ENERGY SOURCE.
|
🔒 Subscribe | |
|
|
PALLET OF EXTRUDED ALUMINUM MACHINE GUARDING
|
🔒 Subscribe | |||
|
|
PALLET OF EXTRUDED ALUMINUM MACHINE GUARDING
|
🔒 Subscribe | |||
|
|
ADAPT | EDD2049855-0407 |
ADAPT EDD2049855-0407 HEATER/CALIBRATOR TESTING EQUIPMENT - USED ADAPT AUTOMATION HEATER/CALIBRATOR. THE ITEM IS INOPERATIVE AND IS BEING SOLD FOR REPAIR OR PARTS.
|
🔒 Subscribe | |
|
|
PALLET OF EXTRUDED ALUMINUM MACHINE GUARDING
|
🔒 Subscribe | |||
|
|
INDUSTRIAL INDEXING SYSTEMS | SU 450 |
SET OF 2 INDUSTRIAL INDEXING SYSTEMS ESICCANT FEEDER SU 450 WITH: APPROXIMATELY 13 INCH LONG ROD APPROXIMATELY 1/2 INCH DIAMETER ROD ON/OFF SWITCH
|
🔒 Subscribe | |
|
|
INDUSTRIAL INDEXING SYSTEMS | SU 450 |
SET OF 4 INDUSTRIAL INDEXING SYSTEMS DESICCANT FEEDER SU 450. FEATURES AN AUTOMATED INDEXING SYSTEM FOR ACCURATE AND UNIFORM DELIVERY OF DESICCANT FOR MOISTURE CONTROL APPLICATIONS. BUILT WITH HIGH-QUALITY COMPONENTS, IT OFFERS DURABILITY AND RELIABILITY IN DEMANDING ENVIRONMENTS. IDEAL FOR USE IN PACKAGING, MANUFACTURING, AND ASSEMBLY LINES WHERE MOISTURE PROTECTION IS CRITICAL TO PRODUCT QUALITY. APPROXIMATELY 13 INCH LONG ROD, APPROXIMATELY 1/2 INCH DIAMETER ROD, ON/OFF SWITCH.
|
🔒 Subscribe | |
|
|
VWR | SCLP-33 |
2000-2030 VWR SCLP-33 UPRIGHT SLIDING GLASS DOOR LABORATORY REFRIGERATOR. CAPACITY: 33 CUBIC FEET. TEMPERATURE RANGE: 2 C TO 8 C. REFRIGERANT TYPE: R134A. DIGITAL TEMPERATURE CONTROLS. ALARM SYSTEM FOR TEMPERATURE MONITORING. SLIDING GLASS DOORS: 2. OVERALL DIMENSIONS: WIDTH: 39.5 INCHES, DEPTH: 29.9 INCHES, HEIGHT: 82.6 INCHES. MOUNTED ON CASTERS. MOTOR: 0.33 HORSEPOWER. ELECTRICAL: 1 PHASE, 60 HZ, 115 VOLTS, 6.2 AMPS. PREVIOUSLY USED IN LABORATORY PRODUCTION APPLICATION. S/N:
|
🔒 Subscribe | |
|
|
BIOER | MB-102 |
BIOER MB-102 THERMOCELL MIXING BLOCK VORTEXER / ROTATOR / SHAKER - USED BIOER MIXING BLOCK. FEATURES INCLUDE A VDF DISPLAY AND WIDE RANGE ADJUSTMENTS ON TEMPERATURE, MIXING SPEED, AND TIMING INTERVALS.
|
🔒 Subscribe | |
|
|
MK NORTH AMERICA | SPU 2040 |
MK NORTH AMERICA SPU 2040 CONTINUOUS 7.5 INCH WIDE X 120 INCH LONG CABLE TRAY CONVEYOR - USED MK NORTH AMERICA CABLE TRAY CONVEYOR WITH: CONVEYOR DIMENSIONS: LENGTH: 120 INCHES WIDTH: 7.5 INCHES SOLID BOTTOM ALUMINUM TRAYS: WIDTH: 9 INCHES RAIL HEIGHT: 4 INCHES MINIMUM AREA: 1 SQUARE INCH ELECTRICAL: 230/460 VOLTS MODEL: SPU 2040
|
🔒 Subscribe | |
|
|
MK NORTH AMERICA | SPU 2040 |
MK NORTH AMERICA SPU 2040 CONTINUOUS CONVEYOR - 7.5 INCH WIDE X 120 INCH LONG. WORKING HEIGHT FROM GROUND: 38 INCHES. MOTOR: .5 HP, 1730 RPM. ELECTRICAL REQUIREMENTS: 60 HERTZ, 230/460 VOLTS.
|
🔒 Subscribe | |
|
|
MK NORTH AMERICA | SPU2040 |
MK NORTH AMERICA SPU2040 CONVEYOR DIMENSIONS: 7.5 INCH WIDE X 120 INCH LONG. WORKING HEIGHT FROM GROUND: 38 INCHES. SEW EURO DRIVE MOTOR 1/2 HORSEPOWER. ELECTRICAL REQUIREMENTS: 230/460 VOLTS, 3 PHASE.
|
🔒 Subscribe | |
|
|
MK NORTH AMERICA | SPU 2040 |
2040 CONTINUOUS CONVEYOR - 7.5 INCH WIDE X 120 INCH LONG. WORKING HEIGHT FROM GROUND: 38 INCHES. MOTOR: .5 HP, 1730 RPM. ELECTRICAL REQUIREMENTS: 60 HERTZ, 230/460 VOLTS.
|
🔒 Subscribe | |
|
|
BAHNSON ENVIRONMENTAL | ES2000 CDML-LT |
25.2 CUBIC FEET BAHNSON ENVIRONMENTAL ES2000 CLIMATE AND HUMIDITY CHAMBER. INTERIOR DIMENSIONS (INCHES): DEPTH: 28.5 WIDTH: 34 HEIGHT: 45. OVERALL DIMENSIONS: LENGTH: 34.5 WIDTH: 41 HEIGHT: 76.5. SOLID SWING DOOR. TEMPERATURE RANGE: +4C TO +40C. VOLUMETRIC UNIFORMITY: +/- 3%. HUMIDITY RANGE: 30 TO 75% RELATIVE HUMIDITY. NUMBER OF SHELVES: 4. ACCESS PORT: 1-INCH. INTERIOR CONSTRUCTION MATERIALS: 304 STAINLESS STEEL. MOUNTED ON CASTERS. REFRIGERANT: R-404A @ 2.8 POUNDS CHARGE. DESIGN PRESSURE (PSIG): HIGH: 500 LOW: 174. ELECTRICAL: 208-230 V / 60 HZ / 24 A / SINGLE PHASE.
|
🔒 Subscribe | |
|
|
BIOMERIEUX | TEMPO FILLER/TEMPO READER |
BIOMERIEUX TEMPO FILLER AND READER AUTOMATED ENUMERATION SYSTEM - TEMPO IS A FULLY AUTOMATED ENUMERATION SYSTEM THAT TESTS QUALITY INDICATORS IN FOOD PRODUCTS AND ENVIRONMENTAL SAMPLES WITHIN YOUR LABORATORY. CONNECTED TO YOUR LIMS, TEMPO PROVIDES OBJECTIVE RESULTS AND ENSURES DATA TRACEABILITY WITH MINIMAL PREPARATION TIME. MODEL: TEMPO FILLER/TEMPO READER
|
🔒 Subscribe | |
|
|
BLUE M | OV-18A |
USED BLUE M OV-18A LAB OVEN WITH 1.8 CUBIC FOOT CAPACITY. FEATURES ADJUSTABLE THERMOSTAT, UNIFORM HEAT DISTRIBUTION, DURABLE CONSTRUCTION, AND EASY-TO-USE CONTROLS. TEMPERATURE RANGE: 38 TO 288 DEGREES CELSIUS. SWING OPEN DOOR STYLE. ANALOG ADJUSTABLE CONTROLS. TABLE TOP DESIGN. INSIDE DIMENSIONS: 19 INCHES WIDE X 18 INCHES DEEP X 15 INCHES TALL. ELECTRICAL SPECIFICATIONS: 120 VOLTS / 1 PHASE / 60 HERTZ. OVERALL DIMENSIONS: 27 INCHES WIDE X 26 INCHES DEEP X 30 INCHES TALL.
|
🔒 Subscribe | |
|
|
MFT | 250 IP 3 |
LOT OF 2 MFT 250 IP 3 MULTI FEEDERS WITH STANDS. THE MFT 250 IP 3 MULTI FEEDER IS A VERSATILE, HIGH-PERFORMANCE FEEDING SYSTEM DESIGNED FOR THE EFFICIENT HANDLING OF VARIOUS MATERIALS IN INDUSTRIAL APPLICATIONS. WITH A ROBUST, MODULAR DESIGN, IT CAN BE CUSTOMIZED TO ACCOMMODATE DIFFERENT FEEDER FORMATS AND INTEGRATION NEEDS. ITS ADVANCED CONTROLS AND PRECISION TECHNOLOGY ENSURE CONSISTENT MATERIAL FLOW, ENHANCING PRODUCTION EFFICIENCY AND REDUCING DOWNTIME. IDEAL FOR APPLICATIONS IN INDUSTRIES SUCH AS PACKAGING, AUTOMOTIVE, AND ELECTRONICS, THE MFT 250 IP 3 IS BUILT FOR RELIABILITY AND EASE OF USE IN DEMANDING ENVIRONMENTS. IDEAL INDUSTRIES: PHARMACEUTICAL, COSMETIC, FINANCIAL, ROBOTICS, FOOD, PACKAGING, AND PRINTING. COMMONLY INTEGRATED WITH: IMAGING LINES, CONVEYORS, POLY-BAGGERS, ORDER FULFILMENT, SHRINK WRAPPERS, FOLDER/GLUER, CASE-PACKER, COLLATORS, EXISTING BASES, FLOW WRAPPERS, CARTONERS, AND BANDERS. PRODUCT EXAMPLES: BAGS, POUCHES, PAMPHLETS, CARD STOCK PRODUCTS, GIFT CARDS, CLEAR FILM PLASTIC COUPONS, MAGNETS, BANDAGES, CARTON BLANKS, TYVEK SHEETS, AND PHARMA INSERTS. MAXIMUM BELT SPEED: 27 METERS PER MINUTE. PRODUCT SPECIFICATIONS: MINIMUM SIZE: 20 MM WIDE X 20 MM LONG, MAXIMUM SIZE: 200 MM WIDE X 325 MM LONG, MINIMUM THICKNESS: 0.075 MM, MAXIMUM THICKNESS: 25 MM. WEIGHT RANGES: 75 TO 125 POUNDS. ELECTRICAL REQUIREMENTS: 110/220 VOLT, 50-60 HERTZ. MODEL: 250IP3
|
🔒 Subscribe | |
|
|
MFT | 250 IP 3 |
LOT OF 2 MFT 250 IP 3 MULTI FEEDERS WITH STANDS. THE MFT 250 IP 3 MULTI FEEDER IS A VERSATILE, HIGH-PERFORMANCE FEEDING SYSTEM DESIGNED FOR THE EFFICIENT HANDLING OF VARIOUS MATERIALS IN INDUSTRIAL APPLICATIONS. WITH A ROBUST, MODULAR DESIGN, IT CAN BE CUSTOMIZED TO ACCOMMODATE DIFFERENT FEEDER FORMATS AND INTEGRATION NEEDS. ITS ADVANCED CONTROLS AND PRECISION TECHNOLOGY ENSURE CONSISTENT MATERIAL FLOW, ENHANCING PRODUCTION EFFICIENCY AND REDUCING DOWNTIME. IDEAL FOR APPLICATIONS IN INDUSTRIES SUCH AS PACKAGING, AUTOMOTIVE, AND ELECTRONICS, THE MFT 250 IP 3 IS BUILT FOR RELIABILITY AND EASE OF USE IN DEMANDING ENVIRONMENTS. IDEAL INDUSTRIES: PHARMACEUTICAL, COSMETIC, FINANCIAL, ROBOTICS, FOOD, PACKAGING, AND PRINTING. COMMONLY INTEGRATED WITH: IMAGING LINES, CONVEYORS, POLY-BAGGERS, ORDER FULFILMENT, SHRINK WRAPPERS, FOLDER/GLUER, CASE-PACKER, COLLATORS, EXISTING BASES, FLOW WRAPPERS, CARTONERS, AND BANDERS. PRODUCT EXAMPLES: BAGS, POUCHES, PAMPHLETS, CARD STOCK PRODUCTS, GIFT CARDS, CLEAR FILM PLASTIC COUPONS, MAGNETS, BANDAGES, CARTON BLANKS, TYVEK SHEETS, AND PHARMA INSERTS. MAXIMUM BELT SPEED: 27 METERS PER MINUTE. PRODUCT SPECIFICATIONS: MINIMUM SIZE: 20 MM WIDE X 20 MM LONG, MAXIMUM SIZE: 200 MM WIDE X 325 MM LONG, MINIMUM THICKNESS: 0.075 MM, MAXIMUM THICKNESS: 25 MM. WEIGHT RANGES: 75 TO 125 POUNDS. ELECTRICAL REQUIREMENTS: 110/220 VOLT, 50-60 HERTZ. MODEL: 250IP3
|
🔒 Subscribe | |
|
|
EPPENDORF | 5804 R |
EPPENDORF CENTRIFUGE 5804 R HAMBURG LAB STYLE CENTRIFUGE - USED EPPENDORF HAMBURG LAB STYLE CENTRIFUGE WITH: THE EPPENDORF HAMBURG LAB STYLE CENTRIFUGE IS A COMPACT, HIGH-PERFORMANCE LABORATORY CENTRIFUGE DESIGNED FOR EFFICIENT SEPARATION OF SAMPLES IN A VARIETY OF RESEARCH AND CLINICAL APPLICATIONS. IT FEATURES A VERSATILE RANGE OF ROTOR OPTIONS, ALLOWING IT TO HANDLE DIFFERENT TUBE SIZES AND SAMPLE VOLUMES. WITH ITS RELIABLE MOTOR AND PRECISE SPEED CONTROL, THE CENTRIFUGE ENSURES CONSISTENT AND REPRODUCIBLE RESULTS. ITS USER-FRIENDLY INTERFACE, COMPACT DESIGN, AND LOW NOISE OPERATION MAKE IT AN IDEAL CHOICE FOR LABORATORIES WITH LIMITED SPACE AND HIGH THROUGHPUT REQUIREMENTS. SEPARATIONS OF PCR TUBE STRIPS AND 1.5/2 ML TEST TUBES UP TO 14,000 ROTATIONS PER MINUTE TEMPERATURE RANGE: -9 DEGREES CELSIUS TO 40 DEGREES CELSIUS REFRIGERATED UNIT WITH CONTINUOUS COOLING ECO SHUT OFF ELECTRICAL REQUIREMENTS: 120 VOLTS / 12 AMPS S/N: AG22331
|
🔒 Subscribe | |
|
|
MFT | 250 IP 3 |
250 IP 3 MULTI FEEDER WITH STAND - A VERSATILE, HIGH-PERFORMANCE FEEDING SYSTEM DESIGNED FOR THE EFFICIENT HANDLING OF VARIOUS MATERIALS IN INDUSTRIAL APPLICATIONS. WITH A ROBUST, MODULAR DESIGN, IT CAN BE CUSTOMIZED TO ACCOMMODATE DIFFERENT FEEDER FORMATS AND INTEGRATION NEEDS. ITS ADVANCED CONTROLS AND PRECISION TECHNOLOGY ENSURE CONSISTENT MATERIAL FLOW, ENHANCING PRODUCTION EFFICIENCY AND REDUCING DOWNTIME. IDEAL FOR APPLICATIONS IN INDUSTRIES SUCH AS PACKAGING, AUTOMOTIVE, AND ELECTRONICS, THE MFT 250 IP 3 IS BUILT FOR RELIABILITY AND EASE OF USE IN DEMANDING ENVIRONMENTS. IDEAL INDUSTRIES: PHARMACEUTICAL, COSMETIC, FINANCIAL, ROBOTICS, FOOD, PACKAGING, AND PRINTING. COMMONLY INTEGRATED WITH: IMAGING LINES, CONVEYORS, POLY-BAGGERS, ORDER FULFILMENT, SHRINK WRAPPERS, FOLDER/GLUER, CASE-PACKER, COLLATORS, EXISTING BASES, FLOW WRAPPERS, CARTONERS, AND BANDERS. PRODUCT EXAMPLES: BAGS, POUCHES, PAMPHLETS, CARD STOCK PRODUCTS, GIFT CARDS, CLEAR FILM PLASTIC COUPONS, MAGNETS, BANDAGES, CARTON BLANKS, TYVEK SHEETS, AND PHARMA INSERTS. MAXIMUM BELT SPEED: 27 METERS PER MINUTE PRODUCT SPECIFICATIONS: MINIMUM SIZE: 20 MM WIDE X 20 MM LONG MAXIMUM SIZE: 200 MM WIDE X 325 MM LONG MINIMUM THICKNESS: 0.075 MM MAXIMUM THICKNESS: 25 MM WEIGHT RANGES: 75 TO 125 POUNDS ELECTRICAL REQUIREMENTS: 110/220 VOLT, 50-60 HERTZ S/N: 250IP3
|
🔒 Subscribe | |
|
|
MFT | 250IP3 |
250IP3 FRICTION FEEDERS TABLE (2) - THE MFT 250 IP3 FRICTION FEEDER IS A HIGH-PERFORMANCE, VERSATILE MACHINE DESIGNED FOR PRECISE AND RELIABLE FEEDING OF A WIDE RANGE OF PRODUCTS IN PACKAGING AND PRINTING APPLICATIONS. ITS ADVANCED FRICTION TECHNOLOGY ENSURES SMOOTH, CONSISTENT FEEDING OF MATERIALS LIKE PAPER, LABELS, AND CARTONS. WITH EASY ADJUSTABILITY, QUICK SETUP, AND MINIMAL MAINTENANCE, THE MFT 250 IP3 ENHANCES EFFICIENCY AND REDUCES DOWNTIME, MAKING IT AN IDEAL CHOICE FOR HIGH-SPEED PRODUCTION ENVIRONMENTS. USED MFT FRICTION FEEDERS WITH: THROUGHPUT: UP TO 140 METERS PER MINUTE DEPENDING ON PRODUCT SIZE AND APPLICATION MAXIMUM BELT SPEED: UP TO 200 METERS PER MINUTE MINIMUM PRODUCT DIMENSIONS: LENGTH: 20 MM WIDTH: 20 MM THICKNESS: 0.075 MM MAXIMUM PRODUCT DIMENSIONS: LENGTH: 325 MM WIDTH: 200 MM THICKNESS: 25 MM PRODUCT MAGAZINE: 750 MM INFRARED SENSOR FOR ACCURATE COUNT ELECTRICAL: 1 PHASE, 50-60 HZ, 115/230 VOLTS PREVIOUSLY USED IN PHARMACEUTICAL FACILITY MODEL: 250IP3
|
🔒 Subscribe | |
|
|
MFT | 250IP3 |
250IP3 FRICTION FEEDERS TABLE (2) - THE MFT 250 IP3 FRICTION FEEDER IS A HIGH-PERFORMANCE, VERSATILE MACHINE DESIGNED FOR PRECISE AND RELIABLE FEEDING OF A WIDE RANGE OF PRODUCTS IN PACKAGING AND PRINTING APPLICATIONS. ITS ADVANCED FRICTION TECHNOLOGY ENSURES SMOOTH, CONSISTENT FEEDING OF MATERIALS LIKE PAPER, LABELS, AND CARTONS. WITH EASY ADJUSTABILITY, QUICK SETUP, AND MINIMAL MAINTENANCE, THE MFT 250 IP3 ENHANCES EFFICIENCY AND REDUCES DOWNTIME, MAKING IT AN IDEAL CHOICE FOR HIGH-SPEED PRODUCTION ENVIRONMENTS. USED MFT FRICTION FEEDERS WITH: THROUGHPUT: UP TO 140 METERS PER MINUTE DEPENDING ON PRODUCT SIZE AND APPLICATION MAXIMUM BELT SPEED: UP TO 200 METERS PER MINUTE MINIMUM PRODUCT DIMENSIONS: LENGTH: 20 MM WIDTH: 20 MM THICKNESS: 0.075 MM MAXIMUM PRODUCT DIMENSIONS: LENGTH: 325 MM WIDTH: 200 MM THICKNESS: 25 MM PRODUCT MAGAZINE: 750 MM INFRARED SENSOR FOR ACCURATE COUNT ELECTRICAL: 1 PHASE, 50-60 HZ, 115/230 VOLTS PREVIOUSLY USED IN PHARMACEUTICAL FACILITY MODEL: 250IP3
|
🔒 Subscribe | |
|
|
GILSON | PIPETMAX 268 |
GILSON PIPETMAX 268 (2): AUTOMATIC PIPETTING SOLUTION FOR PROCESSING BIOLOGICAL ASSAYS. OVERALL DIMENSIONS: LENGTH: 21.4 INCHES WIDTH: 25.8 INCHES HEIGHT: 20.9 INCHES. TEMPERATURE RANGE: 5 C - 40 C. JULABO TD-BASIS WATER CIRCULATING BATHS (2): OVERALL DIMENSIONS: LENGTH: 44 INCHES WIDTH: 20 INCHES HEIGHT: 48 INCHES. MOUNTED ON SWIVEL CASTERS. STAINLESS STEEL CONSTRUCTION. ELECTRICAL: 60 HZ, 230 VOLTS. SPECTRUM LABS KROSFLO DIGITAL PRESSURE MONITOR AND RESEARCH PUMP. METTLER PM6 TABLETOP SCALE. BARNSTEAD/THERMOLYNE S72835 MAGNETIC STIRRER. SCIENTIFIC INDUSTRIES AB1A3201 LAB MIXER. MASTERFLEX 7592-60 MICROPROCESSOR PUMP CONTROLLER.
|
🔒 Subscribe | |
|
|
MUELLER | 100-LITER REACTOR KETTLE |
MUELLER 100-LITER REACTOR KETTLE WITH CORIOLIS FLOW METER. CAPACITY: 100 LITERS (26.4 GALLONS). TANK DIMENSIONS: DEPTH: 22 INCHES, DIAMETER: 32 INCHES. MAXIMUM WORKING PRESSURE: VESSEL: 100 PSI @ 300F, FULL VACUUM. HEAT TRANSFER SURFACE: 150 PSI @ 300F, FULL VACUUM. TOP INLETS: 9 TOTAL (X5): 2-INCH OUTSIDE DIAMETER, 1-INCH INSIDE DIAMETER; (X4): 3.5-INCH OUTSIDE DIAMETER, 2.75-INCH INSIDE DIAMETER. ACCESS WAY: 6.5 INCHES IN DIAMETER. ENDRESS+HAUSER CORIOLIS FLOW METER HOOKUPS (X3): OUTSIDE DIAMETER: 2 INCHES, INSIDE DIAMETER: 1.25 INCHES. OVERALL DIMENSIONS: LENGTH: 47 INCHES, WIDTH: 42 INCHES, HEIGHT: 85 INCHES. CONSTRUCTION: 316 STAINLESS STEEL. MOTOR: 3 HP. MOTOR ELECTRICAL: 208-230/460 V, 60 HZ, 3,535 RPM, THREE PHASE.
|
🔒 Subscribe | |
|
|
PACKSMART | MD-200 |
200 PACKS PER MINUTE, 3 LANES, 600 DPI INKJET PRINTING, ADJUSTABLE KIT SIZE, DF-400 DESICCANT FEEDERS, SERVO-DRIVEN PLATFORM, PRODUCT DETECTION PHOTO EYE, QUICK CHANGEOVER, EMERGENCY STOP, PAINTED STEEL FRAME CONSTRUCTION
|
🔒 Subscribe | |
|
|
PACKSMART | MD-200 |
200 PACKS PER MINUTE, 3 LANES, 600 DPI INKJET PRINTING, ADJUSTABLE KIT SIZE, DF-400 DESICCANT FEEDERS, SERVO-DRIVEN PLATFORM, PRODUCT DETECTION PHOTO EYE, QUICK CHANGEOVER, EMERGENCY STOP, PAINTED STEEL FRAME CONSTRUCTION
|
🔒 Subscribe | |
|
|
DESPATCH | LCC1-16NV-3 |
2000 DESPATCH LCC1-16NV-3 DOUBLE STACK OVEN - USED LABORATORY OVEN FROM DESPATCH. THIS ITEM FEATURES DIGITAL PROGRAMMABLE CONTROLS, HEPA FILTRATION, CHART RECORDING, AND STAINLESS STEEL CONSTRUCTION ON A DOUBLE STACK PLATFORM.
|
🔒 Subscribe | |
|
|
PACKSMART | MD-200 |
200 PACKS PER MINUTE SPEED, 3 LANES, 600 DPI INKJET PRINTING, ADJUSTABLE KIT SIZE SETTINGS, DF-400 DESICCANT FEEDERS, SERVO-DRIVEN PLATFORM, PRODUCT DETECTION PHOTO EYE, QUICK CHANGEOVER, EMERGENCY STOP, PAINTED STEEL FRAME CONSTRUCTION. PACKSMART MD-200 MULTI-STREAM FINISHING AND PACKAGING SYSTEM.
|
🔒 Subscribe | |
|
|
NORDSON EFD | PERFORMUS I |
NORDSON EFD PERFORMUS I FLUID DISPENSER WITH ANALOG CONTROL
|
🔒 Subscribe | |
|
|
1999 | ACS CUSTOM | SPLICE JOINT BONDER II |
1999 ACS CUSTOM SPLICE JOINT BONDER II. WEIGHT: 100 LBS. AIR SUPPLY: 0-150. ELECTRICAL REQUIREMENTS: 120 VAC, 6 AMPS, 1 PHASE.
|
🔒 Subscribe |
|
|
FISHER SCIENTIFIC | ISOTEMP 11-600-49S |
FISHER SCIENTIFIC ISOTEMP 11-600-49S MAGNETIC STIRRING UNIT
|
🔒 Subscribe | |
|
|
COLORADO VIDEO | 620-3V APT-S |
5 UNITS - USED X-Y INDICATOR FROM COLORADO VIDEO. FEATURES OF THE 620 SERIES INCLUDE HIGH PRECISION CONTROLS, MULTIPLE MODES FOR INDICATOR FLEXIBILITY, AND MULTIPLE POWER OPTIONS.
|
🔒 Subscribe | |
|
|
THERMOSCIENTIFIC | HERACELL 240I |
THERMOSCIENTIFIC HERACELL 240I CO2 INCUBATOR - USED THERMOSCIENTIFIC HERACELL 240I CO2 INCUBATOR WITH: CAPACITY: 8.4 CUBIC FEET ELECTRICAL REQUIREMENTS: 120 VOLTS/ 60 HERTZ
|
🔒 Subscribe | |
|
|
JUSTRITE | 891522 |
JUSTRITE 15 GALLON SAFETY CABINET ACID AND CORROSIVE STORAGE CABINET 15 GALLON CAPACITY 57 LITER CAPACITY ONE SHELF RIGHT HINGE
|
🔒 Subscribe | |
|
|
EFD NORDSON | 1500XL |
1500XL FLUID DISPENSER WITH: SERIAL NO: 687129T MODEL NO: 1500XL ELECTRICAL REQUIREMENTS: 100/120/220 VAC, 50/60 HERTZ
|
🔒 Subscribe | |
|
|
SORVALL | H1000B |
SORVALL H1000B SWING BUCKET ROTOR - USED SWING BUCKET ROTOR FROM SORVALL. THE H1000B IS A FOUR POSITION SWING BUCKET ROTOR WITH A MAXIMUM SPEED OF 3600 RPM.
|
🔒 Subscribe | |
|
|
GE | PV-908 |
GE AKTA PV-908 MOTORIZED VALVE - USED MOTORIZED VALVE FROM AKTA. FEATURES OF THE PV-908 INCLUDE 8 AVAILABLE PORTS, A MOTORIZED ROTARY VALVE, AND UP TO 100 ML/MINUTE FLOW RATE.
|
🔒 Subscribe | |
|
|
ALPAQUA | A000260 |
16MM TUBE RACK - 4 UNITS - USED 16MM TUBE RACK FROM ALPAQUA. CAN BE USED WITH A WIDE VARIETY OF TUBES INCLUDING, BUT NOT LIMITED TO, 15ML CENTRIFUGE TUBES, 12ML KIMAX CULTURE TUBES, ORAGENE OG-500 AND TYCO MONOJECT TUBES. 4 UNIT LOT
|
🔒 Subscribe | |
|
|
AGILENT | 3499A |
AGILENT 3499A HIGH SPEED SWITCHING SYSTEM MODULE - USED AGILENT SWITCHING MODULE. FEATURES INCLUDE HIGH SPEED AND DENSITY SWITCHING WITH 5 AVAILABLE MODULE SLOTS.
|
🔒 Subscribe | |
|
|
LEEDS | ACE |
20500./14 - USED LEEDS ACE LIGHT SOURCE. FEATURES INCLUDE A SOLID STATE DIMMER AND 150 WATTS LIGHT OUTPUT.
|
🔒 Subscribe | |
|
|
CSC SCIENTIFIC | 4400-4 IMC |
2000 CSC SCIENTIFIC 4400-4 IMC FERMENTER - USED LAB FERMENTER. FEATURES INCLUDE SENSITIVITY TO AS LOW AS ONE WATT OF HEAT FLOW, REAL TIME MONITORING, AND FLEXIBLE POWER OPTIONS.
|
🔒 Subscribe | |
|
|
STRUERS | POLECTROL |
STRUERS POLECTROL POWER SUPPLY WITH V/A METER FOR ETCHING AND POLISHING - USED POWER SUPPLY FROM STRUERS. FEATURES OF THE POLECTROL UNIT INCLUDE ON BOARD VOLTAGE AND AMPERAGE METERS AND THE ABILITY TO DO BOTH MANUAL OR AUTOMATIC POLISHING AND ETCHING.
|
🔒 Subscribe | |
|
|
SCHOTT | A20500 ACE |
SCHOTT A20500 ACE 150-WATT COLD LIGHT SOURCE - USED SCHOTT ACE LIGHT SOURCE. FEATURES INCLUDE A SOLID STATE DIMMER, 150 WATT COLD LIGHT SOURCE, AND A BUILT IN THERMAL SAFETY.
|
🔒 Subscribe |
SIMCO GEMINI
MISC
SIMCO GEMINI PROFILE EMITTER MODULE SYSTEM - LOT OF 5. FEATURES INCLUDE MULTIPLE OPERATION MODES, QU...
Hammer Price:
🔒
SIMCO GEMINI
MISC
SIMCO GEMINI PROFILE EMITTER MODULE SYSTEM - LOT OF 5. FEATURES INCLUDE MULTIPLE OPERATION MODES, QU...
Hammer Price:
🔒
KQ INTEGRATED SOLUTIONS ION MAX SOURCE 80000-60315
TEST, MEASUREMENT & QUALITY EQUIPMENT
USED IONIZER FROM KQ INTEGRATED SOLUTIONS. FEATURES OF THIS MASS SPECTROMETRY SOURCE INCLUDE A HEATE...
Hammer Price:
🔒
GENEMACHINES HYDRO-SHEAR
PHARMACEUTICAL MANUFACTURING EQUIPMENT
2000 HYDRO-SHEAR LABORATORY DNA FRAGMENTATION SYSTEM - USED DNA SHEARING UNIT FROM GENEMACHINES. FEA...
Hammer Price:
🔒
SIMCO GEMINI
MISC
SIMCO GEMINI PROFILE EMITTER MODULE SYSTEM - LOT OF 5 EMITTER MODULES. FEATURES INCLUDE MULTIPLE OPE...
Hammer Price:
🔒
FISHERBRAND ISOTEMP
REFRIGERATION EQUIPMENT
FISHERBRAND ISOTEMP UNDERCOUNTER REFRIGERATOR. OVERALL DIMENSIONS: LENGTH:23.5 INCHES WIDTH: 24 INCH...
Hammer Price:
🔒
SHEL LAB W20M
PHARMACEUTICAL MANUFACTURING EQUIPMENT
2018 SHELDON H2O BATH SERIES W20M WATER BATH - 18 LITER CAPACITY, STAINLESS STEEL CONSTRUCTION, AND ...
Hammer Price:
🔒
QUIDEL SOFIA 2
TEST, MEASUREMENT & QUALITY EQUIPMENT
2023 QUIDEL SOFIA 2 IMMUNOASSAY ANALYZER. QUIDEL SOFIA 2 IS AN ADVANCED IMMUNOASSAY BENCHTOP ANALYZE...
Hammer Price:
🔒
ADAPT EDD2049855-0407
TEST, MEASUREMENT & QUALITY EQUIPMENT
ADAPT EDD2049855-0407 HEATER/CALIBRATOR TESTING EQUIPMENT - USED ADAPT AUTOMATION HEATER/CALIBRATOR....
Hammer Price:
🔒
INDUSTRIAL INDEXING SYSTEMS SU 450
PHARMACEUTICAL MANUFACTURING EQUIPMENT
SET OF 2 INDUSTRIAL INDEXING SYSTEMS ESICCANT FEEDER SU 450 WITH: APPROXIMATELY 13 INCH LONG ROD APP...
Hammer Price:
🔒
INDUSTRIAL INDEXING SYSTEMS SU 450
PHARMACEUTICAL MANUFACTURING EQUIPMENT
SET OF 4 INDUSTRIAL INDEXING SYSTEMS DESICCANT FEEDER SU 450. FEATURES AN AUTOMATED INDEXING SYSTEM ...
Hammer Price:
🔒
VWR SCLP-33
PHARMACEUTICAL MANUFACTURING EQUIPMENT
2000-2030 VWR SCLP-33 UPRIGHT SLIDING GLASS DOOR LABORATORY REFRIGERATOR. CAPACITY: 33 CUBIC FEET. T...
Hammer Price:
🔒
BIOER MB-102
CHEMICAL PROCESSING EQUIPMENT
BIOER MB-102 THERMOCELL MIXING BLOCK VORTEXER / ROTATOR / SHAKER - USED BIOER MIXING BLOCK. FEATURES...
Hammer Price:
🔒
MK NORTH AMERICA SPU 2040
PHARMACEUTICAL MANUFACTURING EQUIPMENT
MK NORTH AMERICA SPU 2040 CONTINUOUS 7.5 INCH WIDE X 120 INCH LONG CABLE TRAY CONVEYOR - USED MK NOR...
Hammer Price:
🔒
MK NORTH AMERICA SPU 2040
PHARMACEUTICAL MANUFACTURING EQUIPMENT
MK NORTH AMERICA SPU 2040 CONTINUOUS CONVEYOR - 7.5 INCH WIDE X 120 INCH LONG. WORKING HEIGHT FROM G...
Hammer Price:
🔒
MK NORTH AMERICA SPU2040
PHARMACEUTICAL MANUFACTURING EQUIPMENT
MK NORTH AMERICA SPU2040 CONVEYOR DIMENSIONS: 7.5 INCH WIDE X 120 INCH LONG. WORKING HEIGHT FROM GRO...
Hammer Price:
🔒
MK NORTH AMERICA SPU 2040
PHARMACEUTICAL MANUFACTURING EQUIPMENT
2040 CONTINUOUS CONVEYOR - 7.5 INCH WIDE X 120 INCH LONG. WORKING HEIGHT FROM GROUND: 38 INCHES. MOT...
Hammer Price:
🔒
BAHNSON ENVIRONMENTAL ES2000 CDML-LT
PHARMACEUTICAL MANUFACTURING EQUIPMENT
25.2 CUBIC FEET BAHNSON ENVIRONMENTAL ES2000 CLIMATE AND HUMIDITY CHAMBER. INTERIOR DIMENSIONS (INCH...
Hammer Price:
🔒
BIOMERIEUX TEMPO FILLER/TEMPO READER
PHARMACEUTICAL MANUFACTURING EQUIPMENT
BIOMERIEUX TEMPO FILLER AND READER AUTOMATED ENUMERATION SYSTEM - TEMPO IS A FULLY AUTOMATED ENUMERA...
Hammer Price:
🔒
BLUE M OV-18A
MISC
USED BLUE M OV-18A LAB OVEN WITH 1.8 CUBIC FOOT CAPACITY. FEATURES ADJUSTABLE THERMOSTAT, UNIFORM HE...
Hammer Price:
🔒
MFT 250 IP 3
PHARMACEUTICAL MANUFACTURING EQUIPMENT
LOT OF 2 MFT 250 IP 3 MULTI FEEDERS WITH STANDS. THE MFT 250 IP 3 MULTI FEEDER IS A VERSATILE, HIGH-...
Hammer Price:
🔒
MFT 250 IP 3
PHARMACEUTICAL MANUFACTURING EQUIPMENT
LOT OF 2 MFT 250 IP 3 MULTI FEEDERS WITH STANDS. THE MFT 250 IP 3 MULTI FEEDER IS A VERSATILE, HIGH-...
Hammer Price:
🔒
EPPENDORF 5804 R
MISC
EPPENDORF CENTRIFUGE 5804 R HAMBURG LAB STYLE CENTRIFUGE - USED EPPENDORF HAMBURG LAB STYLE CENTRIFU...
Hammer Price:
🔒
MFT 250 IP 3
PHARMACEUTICAL MANUFACTURING EQUIPMENT
250 IP 3 MULTI FEEDER WITH STAND - A VERSATILE, HIGH-PERFORMANCE FEEDING SYSTEM DESIGNED FOR THE EFF...
Hammer Price:
🔒
MFT 250IP3
PHARMACEUTICAL MANUFACTURING EQUIPMENT
250IP3 FRICTION FEEDERS TABLE (2) - THE MFT 250 IP3 FRICTION FEEDER IS A HIGH-PERFORMANCE, VERSATILE...
Hammer Price:
🔒
MFT 250IP3
PHARMACEUTICAL MANUFACTURING EQUIPMENT
250IP3 FRICTION FEEDERS TABLE (2) - THE MFT 250 IP3 FRICTION FEEDER IS A HIGH-PERFORMANCE, VERSATILE...
Hammer Price:
🔒
GILSON PIPETMAX 268
MISC
GILSON PIPETMAX 268 (2): AUTOMATIC PIPETTING SOLUTION FOR PROCESSING BIOLOGICAL ASSAYS. OVERALL DIME...
Hammer Price:
🔒
MUELLER 100-LITER REACTOR KETTLE
CHEMICAL PROCESSING EQUIPMENT
MUELLER 100-LITER REACTOR KETTLE WITH CORIOLIS FLOW METER. CAPACITY: 100 LITERS (26.4 GALLONS). TANK...
Hammer Price:
🔒
PACKSMART MD-200
PACKAGING EQUIPMENT
200 PACKS PER MINUTE, 3 LANES, 600 DPI INKJET PRINTING, ADJUSTABLE KIT SIZE, DF-400 DESICCANT FEEDER...
Hammer Price:
🔒
PACKSMART MD-200
PACKAGING EQUIPMENT
200 PACKS PER MINUTE, 3 LANES, 600 DPI INKJET PRINTING, ADJUSTABLE KIT SIZE, DF-400 DESICCANT FEEDER...
Hammer Price:
🔒
DESPATCH LCC1-16NV-3
PHARMACEUTICAL MANUFACTURING EQUIPMENT
2000 DESPATCH LCC1-16NV-3 DOUBLE STACK OVEN - USED LABORATORY OVEN FROM DESPATCH. THIS ITEM FEATURES...
Hammer Price:
🔒
PACKSMART MD-200
PHARMACEUTICAL MANUFACTURING EQUIPMENT
200 PACKS PER MINUTE SPEED, 3 LANES, 600 DPI INKJET PRINTING, ADJUSTABLE KIT SIZE SETTINGS, DF-400 D...
Hammer Price:
🔒
NORDSON EFD PERFORMUS I
MISC
NORDSON EFD PERFORMUS I FLUID DISPENSER WITH ANALOG CONTROL...
Hammer Price:
🔒
1999 ACS CUSTOM SPLICE JOINT BONDER II
PHARMACEUTICAL MANUFACTURING EQUIPMENT
1999 ACS CUSTOM SPLICE JOINT BONDER II. WEIGHT: 100 LBS. AIR SUPPLY: 0-150. ELECTRICAL REQUIREMENTS:...
Hammer Price:
🔒
FISHER SCIENTIFIC ISOTEMP 11-600-49S
MISC
FISHER SCIENTIFIC ISOTEMP 11-600-49S MAGNETIC STIRRING UNIT...
Hammer Price:
🔒
COLORADO VIDEO 620-3V APT-S
MEDICAL & BIOTECH EQUIPMENT
5 UNITS - USED X-Y INDICATOR FROM COLORADO VIDEO. FEATURES OF THE 620 SERIES INCLUDE HIGH PRECISION ...
Hammer Price:
🔒
THERMOSCIENTIFIC HERACELL 240I
MISC
THERMOSCIENTIFIC HERACELL 240I CO2 INCUBATOR - USED THERMOSCIENTIFIC HERACELL 240I CO2 INCUBATOR WIT...
Hammer Price:
🔒
JUSTRITE 891522
PHARMACEUTICAL MANUFACTURING EQUIPMENT
JUSTRITE 15 GALLON SAFETY CABINET ACID AND CORROSIVE STORAGE CABINET 15 GALLON CAPACITY 57 LITER CAP...
Hammer Price:
🔒
EFD NORDSON 1500XL
PHARMACEUTICAL MANUFACTURING EQUIPMENT
1500XL FLUID DISPENSER WITH: SERIAL NO: 687129T MODEL NO: 1500XL ELECTRICAL REQUIREMENTS: 100/120/22...
Hammer Price:
🔒
SORVALL H1000B
PHARMACEUTICAL MANUFACTURING EQUIPMENT
SORVALL H1000B SWING BUCKET ROTOR - USED SWING BUCKET ROTOR FROM SORVALL. THE H1000B IS A FOUR POSIT...
Hammer Price:
🔒
GE PV-908
MISC
GE AKTA PV-908 MOTORIZED VALVE - USED MOTORIZED VALVE FROM AKTA. FEATURES OF THE PV-908 INCLUDE 8 AV...
Hammer Price:
🔒
ALPAQUA A000260
PHARMACEUTICAL MANUFACTURING EQUIPMENT
16MM TUBE RACK - 4 UNITS - USED 16MM TUBE RACK FROM ALPAQUA. CAN BE USED WITH A WIDE VARIETY OF TUBE...
Hammer Price:
🔒
AGILENT 3499A
TEST, MEASUREMENT & QUALITY EQUIPMENT
AGILENT 3499A HIGH SPEED SWITCHING SYSTEM MODULE - USED AGILENT SWITCHING MODULE. FEATURES INCLUDE H...
Hammer Price:
🔒
LEEDS ACE
TEST, MEASUREMENT & QUALITY EQUIPMENT
20500./14 - USED LEEDS ACE LIGHT SOURCE. FEATURES INCLUDE A SOLID STATE DIMMER AND 150 WATTS LIGHT O...
Hammer Price:
🔒
CSC SCIENTIFIC 4400-4 IMC
MISC
2000 CSC SCIENTIFIC 4400-4 IMC FERMENTER - USED LAB FERMENTER. FEATURES INCLUDE SENSITIVITY TO AS LO...
Hammer Price:
🔒
STRUERS POLECTROL
PHARMACEUTICAL MANUFACTURING EQUIPMENT
STRUERS POLECTROL POWER SUPPLY WITH V/A METER FOR ETCHING AND POLISHING - USED POWER SUPPLY FROM STR...
Hammer Price:
🔒
SCHOTT A20500 ACE
MISC
SCHOTT A20500 ACE 150-WATT COLD LIGHT SOURCE - USED SCHOTT ACE LIGHT SOURCE. FEATURES INCLUDE A SOLI...
Hammer Price:
🔒