SPECIALIZED MILLWORK SELLING DOOR SHOP EQUIPMENT TOOLING SHAPERS CUTTERS MOULDER KNIVES MORE
Category: SURFACE FINISHING EQUIPMENT
Total Lots:
835
Total Sales:
🔒 Subscribe
Price Distribution
| Year | Make | Model | Lot Description | Hammer Price | |
|---|---|---|---|---|---|
|
WEINIG | N MAX 9000 |
WEINIG N MAX 9000 MOULDING HEAD, 1-1/4" BORE, 4-3/4" OUTSIDE DIAMETER, 5" - 4 KNIVES, GOOD CONDITION AND READY TO USE (U.N.O.), NO RUST, S/N: 017_0058 AND 017_0417 AND 071_0455
|
🔒 Subscribe | |
|
|
SHAPER CUTTER, RAISED PANEL CUTTER, 1-1/4 LONG CUT, 5" OUTSIDE DIAMETER, 1" BORE, SEE PICS FOR PROFILE
|
🔒 Subscribe | |||
|
|
MOULDING KNIVES, EDGE DETAIL, 3/4" - 1-1/8" THICK, KNIVES ARE IN GOOD CONDITION AND READY TO USE (U.N.O.), SEE PICS FOR PROFILE
|
🔒 Subscribe | |||
|
|
MOULDING KNIVES, 3-1/2" CROWN, 70 - G = 13/16", SEE PICS FOR PROFILE, / = 13-16", KNIVES ARE IN GOOD CONDITION AND READY TO USE (U.N.O.), SEE PICS FOR PROFILE, /DSC3460
|
🔒 Subscribe | |||
|
|
MOULDING KNIVES, 3-1/2" CROWN, 20 - N = 1-1/4", KNIVES ARE IN GOOD CONDITION AND READY TO USE (U.N.O.), SEE PICS FOR PROFILE
|
🔒 Subscribe | |||
|
|
MOULDING KNIVES, 4 KNIVES, 1-12" KNIVES, 3/4" DETAIL, KNIVES ARE IN GOOD CONDITION AND READY TO USE (U.N.O.), SEE PICS FOR PROFILE, /017-0122"
|
🔒 Subscribe | |||
|
|
MOULDING KNIVES, 5-1/8" CASING, 0 - 35 - J = 1", KNIVES ARE IN GOOD CONDITION AND READY TO USE (U.N.O.), SEE PICS FOR PROFILE
|
🔒 Subscribe | |||
|
|
MOULDING KNIVES, 2" WIDE ANGLE, CROWN BACK ANGLE, ANGLE FOR 1" THICK CUT, DULL, KNIVES ARE IN GOOD CONDITION AND READY TO USE (U.N.O.), SEE PICS FOR PROFILE
|
🔒 Subscribe | |||
|
|
MOULDING KNIVES, 2" RAISED MOULDING, NO TEMPLATE, KNIVES ARE IN GOOD CONDITION AND READY TO USE (U.N.O.), SEE PICS FOR PROFILE
|
🔒 Subscribe | |||
|
|
CHEROKEE TOOL CO. |
SHAPER CUTTER, CHEROKEE TOOL CO., (1) MISC STILE - RAIL, 4" OUTSIDE DIAMETER, 1-1/4" BORE, SEE PICS FOR PROFILE
|
🔒 Subscribe | ||
|
|
MOULDING KNIVES, 3 PR. DETAIL MOULDING KNIVES: (1) EDGE DETAIL, 2" KNIVES, F = 3/4"; (1) EDGE DETAIL, 1-1/2" KNIVES, G = 13/16"; (1) EDGE DETAIL, 2" KNIVES, F = 3/4"; KNIVES ARE IN GOOD CONDITION AND READY TO USE (U.N.O.), SEE PICS FOR PROFILE, /DSC4516
|
🔒 Subscribe | |||
|
|
CHEROKEE TOOL CO |
SHAPER CUTTER, CHEROKEE TOOL CO, (2) CENTER CUTTER, (1) 1/4" X 3-7/16", 1-1/4" BORE, (1) 1/4" X 4/1/4", 1-1/4" BORE, / 3176"
|
🔒 Subscribe | ||
|
|
L.R.H. ENT. |
L.R.H. ENT. SHAPER CUTTER, RAISED PANEL CUTTER, 1-5/8" LONG CUT, 5-3/4" OUTSIDE DIAMETER, 1" BORE, SEE PICS FOR PROFILE
|
🔒 Subscribe | ||
|
|
SHAPER CUTTER, RAISED PANEL CUTTER, 1-1/2" LONG CUT, 6-1/4" OUTSIDE DIAMETER, 6 WING, 1" BORE, C/W ROTATION, SEE PICS FOR PROFILE
|
🔒 Subscribe | |||
|
|
L.R.H. ENT. |
SHAPER CUTTER, L.R.H. ENT., RAISED PANEL CUTTER, 1-3/4" LONG CUT, 5-1/2" OUTSIDE DIAMETER, 1-1/4" BORE, SEE PICS FOR PROFILE
|
🔒 Subscribe | ||
|
|
CHEROKEE TOOL CO | CENTER CUTTER |
SHAPER CUTTER, CHEROKEE TOOL CO CENTER CUTTER, 1/8" X 5-15/16", 50MM BORE S/N:DSC3539N
|
🔒 Subscribe | |
|
|
CHEROKEE TOOL CO | CENTER CUTTER |
SHAPER CUTTER, CHEROKEE TOOL CO CENTER CUTTER, 9/16" X 5-15/16", 50MM BORE
|
🔒 Subscribe | |
|
|
CHEROKEE TOOL CO | 620 |
SHAPER CUTTERS, CHEROKEE TOOL CO, (2) NO. 620 . 2 . DE . T 7/8" RAIL (COPE) AND 1/4"CENTER CUTTER BOLTED TOGETHER,(2) NO. 620 . 1 . DE . T STILE (STICK) AND 1/4" CENTER CUTTER BOLTED TOGETHER, 11-1/2" OUTSIDE DIAMETER, 8 WING, 50MM BORE, SEE PICS FOR PROFILE 620
|
🔒 Subscribe | |
|
|
CHEROKEE TOOL CO | 647 |
SHAPER CUTTERS, CHEROKEE TOOL CO, NO. 647 . 1 . T 7/8" STILE (STICK) CUTTER AND 1-5/8" THICK SASH, CUTTER BOLTED TOGETHER, 4-3/4" OUTSIDE DIAMETER, 1-1/2" BORE, SEE PICS FOR PROFILE 647
|
🔒 Subscribe | |
|
|
CHEROKEE TOOL CO | 620 |
SHAPER CUTTERS, CHEROKEE TOOL CO, (2) NO. 620 . 2 . DE . T 7/8" RAIL (COPE) AND 1/4"CENTER CUTTER BOLTED TOGETHER,(2) NO. 620 . 1 . DE . T STILE (STICK) AND 1/4" CENTER CUTTER BOLTED TOGETHER, 11-1/2" OUTSIDE DIAMETER, 8 WING, 50MM BORE, SEE PICS FOR PROFILE 620, /DSC3088-87"
|
🔒 Subscribe | |
|
|
CHEROKEE TOOL CO | NO. 714 |
SHAPER CUTTERS, CHEROKEE TOOL CO NO. 714 STAIR TREAD NOSING, 11-1/4" OUTSIDE DIAMETER, 50MM BORE S/N: DSC3527N
|
🔒 Subscribe | |
|
|
CHEROKEE TOOL CO | 594 . T |
SHAPER CUTTERS, CHEROKEE TOOL CO, NO. 594 . T, RAISED PANEL, 2" LENGTH OF CUT, 11-1/2" OUTSIDE DIAMETER. 6 WING, 50MM BORE, SEE PICS FOR PROFILE 594, / DSC3099-100
|
🔒 Subscribe | |
|
|
CHEROKEE TOOL CO | NO. 713 . T |
SHAPER CUTTERS, CHEROKEE TOOL CO NO. 713 . T, (2) 3/8" RADIUS / ROUNDOVER, MODIFIED 3 DEGREES OPEN AT BOTH TOP AND EDGE, 1-1/4" THICK CUT, 11-1/2" OUTSIDE DIAMETER, 8 WING, 50MM BORE
|
🔒 Subscribe | |
|
|
CHEROKEE TOOL CO | 2019 |
SHAPER CUTTERS, CHEROKEE TOOL CO, (2) NO. 2019 . T RAISED PANEL CUTTERS ( 1 C/W AND 1 C/C/W ROTATION), 1-5/8" LENGTH OF CUT, 11" OUTSIDE DIAMETER, 6 WING + 6, 50MM BORE, SEE PICS FOR PROFILE 2019, /DSC3101-02-03
|
🔒 Subscribe | |
|
|
SATURN 4.070 |
SATURN 4.070 SHAPER CUTTERS, 236MM X 60MM, 2-3/8" THICK, 9-1/4" OUTSIDE DIAMETER, 6 WING, 60 DEGREE CORRAGATED BACK MOULDER KNIVES, 50MM BORE
|
🔒 Subscribe | ||
|
|
FS TOOL |
SHAPER CUTTERS, FS TOOL MOULDER HEAD - 137 MM X 80 MM X 46.04 MM, 3-1/8" WIDE, 5-3/8" OUTSIDE DIAMETER, 4 KNIFE, 50MM BORE, GOOD CONDITION
|
🔒 Subscribe | ||
|
|
SHAPER CUTTER, STILE AND RAIL SET, 3/4" USABLE THICKNESS BECAUSE OF NICK IN CARBIDE, 1/4" AND 1-2" CENTER CUTTERS, ALSO 1-1/4" SASH CUTTER FOR STILE AND RAIL, 4" OUTSIDE DIAMETER. 1-1/4" BORE, SEE PICS FOR PROFILE
|
🔒 Subscribe | |||
|
|
L.R.H. ENT. |
SHAPER CUTTERS, L.R.H. ENT., STILE AND RAIL AND 1/2" CENTER CUTTERS, 3-1/2" OUTSIDE DIAMETER, 1-1/4" BORE SEE PICS FOR PROFILE
|
🔒 Subscribe | ||
|
|
L.R.H. ENT. | 98096 |
L.R.H. ENT. 98096 SHAPER CUTTERS: (1) 13/16" STILE CUTTER WITH 1-1/4" THICK SASH, (1) 13-16" RAIL CUTTER WITH 1-1/4" SASH, 3-1/2" OUTSIDE DIAMETER, 1-1/4" BORE
|
🔒 Subscribe | |
|
|
SHAPER CUTTERS, (2) 5/8" STRAIGHT CUTTERS, 4-1/4" OUTSIDE DIAMETER, 50MM BORE
|
🔒 Subscribe | |||
|
|
CHEROKEE TOOL CO | 620 |
SHAPER CUTTERS, CHEROKEE TOOL CO, NO. (2) 620 . 2 . T. RAIL (COPE) CUTTERS, NO CENTER CUTTER, 4-1/2" OUTSIDE DIAMETER, 1-1/4" BORE, SEE PICS FOR PROFILE
|
🔒 Subscribe | |
|
|
CHEROKEE TOOL CO | 620 |
SHAPER CUTTERS, CHEROKEE TOOL CO, NO. 620 . 2 . T 7/8" RAIL (COPE) AND 1-3/4"SASH CUTTER BOLTED TOGETHER, 4-1/2" OUTSIDE DIAMETER, 1-1/4"BORE, SEE PICS FOR PROFILE 620, /DSC3082, 44062, 44072
|
🔒 Subscribe | |
|
|
CHEROKEE TOOL CO | 647 |
(2) NO. 647 . 2 . T 7/8" RAIL (COPE) CUTTERS, NO CENTER CUTTER, (2) NO. 647 1 . T 7/8" STILE AND CENTER CUTTER BOLTED TOGETHER, 11-1/2" OUTSIDE DIAMETER, 8 WING, 50MM BORE, SEE PICS FOR PROFILE 647
|
🔒 Subscribe | |
|
|
CHEROKEE TOOL CO | NO. 647 |
SHAPER CUTTERS, CHEROKEE TOOL CO NO. 647 . 2. T 7/8" RAIL (COPE) CUTTER AND 1-3/4" SASH CUTTER BOLTED TOGETHER, 4-1/2" OUTSIDE DIAMETER, 1-1/4" BORE
|
🔒 Subscribe | |
|
|
CHEROKEE TOOL CO | 620 |
SHAPER CUTTERS, CHEROKEE TOOL CO - (2) NO. 620 . 1 . M . T, 7/8" STILE (STICK) CUTTERS AND 1-1/4" CENTER CUTTER BOLTED TOGETHER, 6" OUTSIDE DIAMETER, 6 WING, 1-1/2" BORE SEE PICS FOR PROFILE 620, CUTTERS ARE SHARP AND IN GOOD CONDITION WITH TANTUNG WELDED INSERTS /DSC3035-36-39-48"
|
🔒 Subscribe | |
|
|
CHEROKEE TOOL CO | 647 |
SHAPER CUTTERS, CHEROKEE TOOL CO - (2) NO. 647 . 1 . M . T, 7/8" STILE (STICK) CUTTERS AND 1/4" CENTER CUTTER BOLTED TOGETHER, 2-1/8" THICK CUT, 6" OUTSIDE DIAMETER, 6 WING, 1-1/2" BORE, SEE PICS FOR PROFILE 647, CUTTERS ARE SHARP AND IN GOOD CONDITION WITH TANTUNG WELDED INSERTS
|
🔒 Subscribe | |
|
|
CHEROKEE TOOL CO | 620 |
SHAPER CUTTERS, CHEROKEE TOOL CO - (2) NO. 620 . 1 . B . M , 7/8" STILE (STICK) CUTTERS AND 1/4" CENTER CUTTER BOLTED TOGETHER, 4-3/4" OUTSIDE DIAMETER, 4 WING, C/C/W ROTATION, 1-1/2" BORE, SEE PICS FOR PROFILE 620, NEEDS NEW INSERTS, TANTUNG WELDED INSERTS
|
🔒 Subscribe | |
|
|
CHEROKEE TOOL CO | 620 |
SHAPER CUTTERS, CHEROKEE TOOL CO - (2) NO. 620 . 1 . A . M , 7/8" STILE (STICK) CUTTERS AND 1/4" CENTER CUTTER BOLTED TOGETHER, 4-3/4" OUTSIDE DIAMETER, 4 WING, C/W ROTATION, 1-1/2" BORE, SEE PICS FOR PROFILE 620, CUTTER IS IN GOOD CONDITION, TANTUNG WELDED INSERTS
|
🔒 Subscribe | |
|
|
SHAPER CUTTERS, VALLEY SAW, (2) 13/16" STILE (STICK) AND (2) 13/16"RAIL (COPE) SET, (2) 3/4" CENTER CUTTERS, 6" OUTSIDE DIAMETER, (4) EXTRA CENTER CUTTERS, 2-3/4" TOTAL THICKNESS, 50MM BORE, SEE PICS FOR PROFILE
|
🔒 Subscribe | |||
|
|
CHEROKEE TOOL CO | 622 |
SHAPER CUTTERS, CHEROKEE TOOL CO - NO. 622 . T, RAISED PANEL - TOP AND BOTTOM OR LEFT AND RIGHT, 1-3/4" LENGTH OF CUT, 1/4"+" CENTER CUTTER BOLTED TOGETHER, 50MM BORE, 11-1/2" OUTSIDE DIAMETER, 6 WING (A WITH B ON LINE 7 IS TOP AND BOTTOM AND LEFT AND RIGHT SET FOR DOUBLE END TENNONER) SEE PICS FOR PROFILE 622, CUTTERS ARE SHARP AND IN GOOD CONDITION WITH TANTUNG WELDED INSERTS
|
🔒 Subscribe | |
|
|
PALLET RACKING, NO CONTENTS ARE INCLUDED, 132" X 42" X 8' H"
|
🔒 Subscribe | |||
|
|
LEITZ | NO. 377 |
LEITZ NO. 377 SHAPER CUTTER, (2) 81MM X 81MM X 1-1/8, 1-5/8 X 3-1/4" X M-3 INSERTS, 3-1/4" OUTSIDE DIAMETER, 1-1/8" BORE, SEE PICS FOR PROFILE
|
🔒 Subscribe | |
|
|
DOUGLAS FIR - CLEAR VERTICAL GRAIN LUMBER. THIS LUMBER IS RECLAIMED AND WAS CUT IN THE 1930'S OR 1940'S. THICKNESS IS 1" UP TO 2". GRAIN IS VERY TIGHT AND IT IS CLEAR. THIS MATERIAL CAME FROM SEATING IN A COURTHOUSE AND THERE IS ALMOST NO SCREWS AND NO NAILS. 1-1/16" TO 1-1/4" THICKNESS AS 6/4, 1-1/2" AND THICKER TALLIED AS 8/4. TOTAL BOARD FEET IS 1052 BF, CLEAR PIECE COUNT IS AS FOLLOWS - ALL DIMENSION ARE IN INCHES: 21 PCS 1-1/4 X 17 X 14; 21 PCS 1-1/4 X 17 X 19-1/2; 49 PCS 1-1/4 X 13 X 13; 1 PC 1-1/4 X 12 X 13; 1 PC 1-1/4 X 12 X 19; 10 PCS 1-1/4 X 5 X 86; 3 PCS 1-1/4 X 3 X 86; 11 PCS 1-3/4 X 15 X 87; 12 PCS 1-1/8" X 9 X 87; 33PCS 1-3/4 X 9 X 87; 3 PCS 1-3/4" X 29 X 91; 1 PC 1-3/4 X 18 X 44; 1 PC 1-3/4 X 6 X 90; (826 B.F. IS LONGER THAN 85") TALLY AND PIECE COUNT ARE GUARANTEED TO BE WITHIN PLUS 10% TO MINUS 5%.
|
🔒 Subscribe | |||
|
|
FLEXON | LFG 2120H-0510-FTP2B |
PLASTIC FLAT TOP CHAIN - NEW - FLEXON LFG 2120H-0510-FTP2B
|
🔒 Subscribe | |
|
|
ROLLER CONVEYOR, 30" X 96" - H.D. FRAME ON CASTERS
|
🔒 Subscribe | |||
|
|
MOULDING KNIVES, 2-1/2" - 4-1/4" CHAIRRAIL, 10 - L = 1-1/8", KNIVES ARE IN GOOD CONDITION AND READY TO USE (U.N.O.), SEE PICS FOR PROFILE
|
🔒 Subscribe | |||
|
|
MOULDING KNIVES, 1/8" MOULDING, B = 1/2", KNIVES ARE IN GOOD CONDITION AND READY TO USE (U.N.O.), SEE PICS FOR PROFILE
|
🔒 Subscribe | |||
|
|
MOULDING KNIVES, 2-1/8" KNIVES, 1/8" RADIUS/ROUNDOVER, KNIVES ARE IN GOOD CONDITION AND READY TO USE (U.N.O.), SEE PICS FOR PROFILE
|
🔒 Subscribe | |||
|
|
MOULDING KNIVES, 1-1/16" KNIVES, 1/8" RADIUS/ROUNDOVER, KNIVES ARE IN GOOD CONDITION AND READY TO USE (U.N.O.), SEE PICS FOR PROFILE
|
🔒 Subscribe | |||
|
|
MOULDING KNIVES, 1-1/2" BULLNOSE, 3/4" RADIUS, L = 1-1/8", KNIVES ARE IN GOOD CONDITION AND READY TO USE (U.N.O.), SEE PICS FOR PROFILE
|
🔒 Subscribe |
WEINIG N MAX 9000
WEINIG N MAX 9000 MOULDING HEAD, 1-1/4" BORE, 4-3/4" OUTSIDE DIAMETER, 5" - 4 KNIVES, GOOD CONDITION...
SHAPER CUTTER, RAISED PANEL CUTTER, 1-1/4 LONG CUT, 5" OUTSIDE DIAMETER, 1" BORE, SEE PICS FOR PROFI
MOULDING KNIVES, EDGE DETAIL, 3/4" - 1-1/8" THICK, KNIVES ARE IN GOOD CONDITION AND READY TO USE (U.
MOULDING KNIVES, 3-1/2" CROWN, 70 - G = 13/16", SEE PICS FOR PROFILE, / = 13-16", KNIVES ARE IN GOOD
MOULDING KNIVES, 3-1/2" CROWN, 20 - N = 1-1/4", KNIVES ARE IN GOOD CONDITION AND READY TO USE (U.N.O
MOULDING KNIVES, 4 KNIVES, 1-12" KNIVES, 3/4" DETAIL, KNIVES ARE IN GOOD CONDITION AND READY TO USE
MOULDING KNIVES, 5-1/8" CASING, 0 - 35 - J = 1", KNIVES ARE IN GOOD CONDITION AND READY TO USE (U.N.
MOULDING KNIVES, 2" WIDE ANGLE, CROWN BACK ANGLE, ANGLE FOR 1" THICK CUT, DULL, KNIVES ARE IN GOOD C
MOULDING KNIVES, 2" RAISED MOULDING, NO TEMPLATE, KNIVES ARE IN GOOD CONDITION AND READY TO USE (U.N
CHEROKEE TOOL CO.
SHAPER CUTTER, CHEROKEE TOOL CO., (1) MISC STILE - RAIL, 4" OUTSIDE DIAMETER, 1-1/4" BORE, SEE PICS ...
MOULDING KNIVES, 3 PR. DETAIL MOULDING KNIVES: (1) EDGE DETAIL, 2" KNIVES, F = 3/4"; (1) EDGE DETAIL
CHEROKEE TOOL CO
SHAPER CUTTER, CHEROKEE TOOL CO, (2) CENTER CUTTER, (1) 1/4" X 3-7/16", 1-1/4" BORE, (1) 1/4" X 4/1/...
L.R.H. ENT.
L.R.H. ENT. SHAPER CUTTER, RAISED PANEL CUTTER, 1-5/8" LONG CUT, 5-3/4" OUTSIDE DIAMETER, 1" BORE, S...
SHAPER CUTTER, RAISED PANEL CUTTER, 1-1/2" LONG CUT, 6-1/4" OUTSIDE DIAMETER, 6 WING, 1" BORE, C/W R
L.R.H. ENT.
SHAPER CUTTER, L.R.H. ENT., RAISED PANEL CUTTER, 1-3/4" LONG CUT, 5-1/2" OUTSIDE DIAMETER, 1-1/4" BO...
CHEROKEE TOOL CO CENTER CUTTER
SHAPER CUTTER, CHEROKEE TOOL CO CENTER CUTTER, 1/8" X 5-15/16", 50MM BORE S/N:DSC3539N...
CHEROKEE TOOL CO CENTER CUTTER
SHAPER CUTTER, CHEROKEE TOOL CO CENTER CUTTER, 9/16" X 5-15/16", 50MM BORE...
CHEROKEE TOOL CO 620
SHAPER CUTTERS, CHEROKEE TOOL CO, (2) NO. 620 . 2 . DE . T 7/8" RAIL (COPE) AND 1/4"CENTER CUTTER BO...
CHEROKEE TOOL CO 647
SHAPER CUTTERS, CHEROKEE TOOL CO, NO. 647 . 1 . T 7/8" STILE (STICK) CUTTER AND 1-5/8" THICK SASH, ...
CHEROKEE TOOL CO 620
SHAPER CUTTERS, CHEROKEE TOOL CO, (2) NO. 620 . 2 . DE . T 7/8" RAIL (COPE) AND 1/4"CENTER CUTTER BO...
CHEROKEE TOOL CO NO. 714
SHAPER CUTTERS, CHEROKEE TOOL CO NO. 714 STAIR TREAD NOSING, 11-1/4" OUTSIDE DIAMETER, 50MM BORE S/N...
CHEROKEE TOOL CO 594 . T
SHAPER CUTTERS, CHEROKEE TOOL CO, NO. 594 . T, RAISED PANEL, 2" LENGTH OF CUT, 11-1/2" OUTSIDE DIAME...
CHEROKEE TOOL CO NO. 713 . T
SHAPER CUTTERS, CHEROKEE TOOL CO NO. 713 . T, (2) 3/8" RADIUS / ROUNDOVER, MODIFIED 3 DEGREES OPEN A...
CHEROKEE TOOL CO 2019
SHAPER CUTTERS, CHEROKEE TOOL CO, (2) NO. 2019 . T RAISED PANEL CUTTERS ( 1 C/W AND 1 C/C/W ROTATION...
SATURN 4.070
SATURN 4.070 SHAPER CUTTERS, 236MM X 60MM, 2-3/8" THICK, 9-1/4" OUTSIDE DIAMETER, 6 WING, 60 DEGREE ...
FS TOOL
SHAPER CUTTERS, FS TOOL MOULDER HEAD - 137 MM X 80 MM X 46.04 MM, 3-1/8" WIDE, 5-3/8" OUTSIDE DIAMET...
SHAPER CUTTER, STILE AND RAIL SET, 3/4" USABLE THICKNESS BECAUSE OF NICK IN CARBIDE, 1/4" AND 1-2" C
L.R.H. ENT.
SHAPER CUTTERS, L.R.H. ENT., STILE AND RAIL AND 1/2" CENTER CUTTERS, 3-1/2" OUTSIDE DIAMETER, 1-1/4"...
L.R.H. ENT. 98096
L.R.H. ENT. 98096 SHAPER CUTTERS: (1) 13/16" STILE CUTTER WITH 1-1/4" THICK SASH, (1) 13-16" RAIL CU...
SHAPER CUTTERS, (2) 5/8" STRAIGHT CUTTERS, 4-1/4" OUTSIDE DIAMETER, 50MM BORE
CHEROKEE TOOL CO 620
SHAPER CUTTERS, CHEROKEE TOOL CO, NO. (2) 620 . 2 . T. RAIL (COPE) CUTTERS, NO CENTER CUTTER, 4-1/2"...
CHEROKEE TOOL CO 620
SHAPER CUTTERS, CHEROKEE TOOL CO, NO. 620 . 2 . T 7/8" RAIL (COPE) AND 1-3/4"SASH CUTTER BOLTED TOGE...
CHEROKEE TOOL CO 647
(2) NO. 647 . 2 . T 7/8" RAIL (COPE) CUTTERS, NO CENTER CUTTER, (2) NO. 647 1 . T 7/8" STILE AND CEN...
CHEROKEE TOOL CO NO. 647
SHAPER CUTTERS, CHEROKEE TOOL CO NO. 647 . 2. T 7/8" RAIL (COPE) CUTTER AND 1-3/4" SASH CUTTER BOLTE...
CHEROKEE TOOL CO 620
SHAPER CUTTERS, CHEROKEE TOOL CO - (2) NO. 620 . 1 . M . T, 7/8" STILE (STICK) CUTTERS AND 1-1/4" CE...
CHEROKEE TOOL CO 647
SHAPER CUTTERS, CHEROKEE TOOL CO - (2) NO. 647 . 1 . M . T, 7/8" STILE (STICK) CUTTERS AND 1/4" CEN...
CHEROKEE TOOL CO 620
SHAPER CUTTERS, CHEROKEE TOOL CO - (2) NO. 620 . 1 . B . M , 7/8" STILE (STICK) CUTTERS AND 1/4" CEN...
CHEROKEE TOOL CO 620
SHAPER CUTTERS, CHEROKEE TOOL CO - (2) NO. 620 . 1 . A . M , 7/8" STILE (STICK) CUTTERS AND 1/4" CE...
SHAPER CUTTERS, VALLEY SAW, (2) 13/16" STILE (STICK) AND (2) 13/16"RAIL (COPE) SET, (2) 3/4" CENTER
CHEROKEE TOOL CO 622
SHAPER CUTTERS, CHEROKEE TOOL CO - NO. 622 . T, RAISED PANEL - TOP AND BOTTOM OR LEFT AND RIGHT, 1-3...
PALLET RACKING, NO CONTENTS ARE INCLUDED, 132" X 42" X 8' H"
LEITZ NO. 377
LEITZ NO. 377 SHAPER CUTTER, (2) 81MM X 81MM X 1-1/8, 1-5/8 X 3-1/4" X M-3 INSERTS, 3-1/4" OUTSIDE D...
DOUGLAS FIR - CLEAR VERTICAL GRAIN LUMBER. THIS LUMBER IS RECLAIMED AND WAS CUT IN THE 1930'S OR 194
FLEXON LFG 2120H-0510-FTP2B
PLASTIC FLAT TOP CHAIN - NEW - FLEXON LFG 2120H-0510-FTP2B...
ROLLER CONVEYOR, 30" X 96" - H.D. FRAME ON CASTERS
MOULDING KNIVES, 2-1/2" - 4-1/4" CHAIRRAIL, 10 - L = 1-1/8", KNIVES ARE IN GOOD CONDITION AND READY
MOULDING KNIVES, 1/8" MOULDING, B = 1/2", KNIVES ARE IN GOOD CONDITION AND READY TO USE (U.N.O.), SE
MOULDING KNIVES, 2-1/8" KNIVES, 1/8" RADIUS/ROUNDOVER, KNIVES ARE IN GOOD CONDITION AND READY TO USE
MOULDING KNIVES, 1-1/16" KNIVES, 1/8" RADIUS/ROUNDOVER, KNIVES ARE IN GOOD CONDITION AND READY TO US
MOULDING KNIVES, 1-1/2" BULLNOSE, 3/4" RADIUS, L = 1-1/8", KNIVES ARE IN GOOD CONDITION AND READY TO