SPECIALIZED MILLWORK SELLING DOOR SHOP EQUIPMENT TOOLING SHAPERS CUTTERS MOULDER KNIVES MORE
Category: SURFACE FINISHING EQUIPMENT
Total Lots:
835
Total Sales:
🔒 Subscribe
Price Distribution
| Year | Make | Model | Lot Description | Hammer Price | |
|---|---|---|---|---|---|
|
CHEROKEE TOOL CO | 620 |
SHAPER CUTTERS, CHEROKEE TOOL CO, (2) NO. 620 . 2 . T 7/8" RAIL (COPE) AND 1/4" CENTER CUTTER BOLTED TOGETHER,(2) NO. 620 . 1 . T STILE (STICK) AND 1/4" CENTER CUTTER BOLTED TOGETHER, 4-1/2" OUTSIDE DIAMETER, 1-1/4" BORE, SEE PICS FOR PROFILE 620
|
🔒 Subscribe | |
|
|
SHAPER CUTTER, (2) CUTTERS WITH 1-1/4" BORE: MATCHING PAIR, 1/2" THICK CUT EACH, 7/16" WIDE DETAIL, 4" OUTSIDE DIAMETER, SEE PICS FOR PROFILE
|
🔒 Subscribe | |||
|
|
L.R.H. ENT. | K1431 |
SHAPER CUTTER, (2) CUTTERS WITH 1-1/4" BORE: (1) L.R.H. ENT. K1431 1/4" RADIUS OR ROUNDOVER, 1/2" THICK CUT, 3-3/4" OUTSIDE DIAMETER, (1) L.R.H. ENT. 1/2" THICK DETAIL, 1/2" WIDE DETAIL, 3-1/2" OUTSIDE DIAMETER, SEE PICS FOR PROFILE
|
🔒 Subscribe | |
|
|
L.R.H. ENT. | OGEE X 2 |
SHAPER CUTTER, L.R.H. ENT. OGEE X 2 WITH STEP-FLAT, 2-1/4" THICK CUT, 5" OUTSIDE DIAMETER, 1-1/4" BORE, SEE PICS FOR PROFILE
|
🔒 Subscribe | |
|
|
CHEROKEE TOOL CO. |
SHAPER CUTTER, CHEROKEE TOOL CO., (2) CENTER CUTTERS: (1) 5/16" X 2-1/4, (1) 1/4" X 2-1/2", 1-1/4" BORE, SEE PICS FOR PROFILE
|
🔒 Subscribe | ||
|
|
MOULDING KNIVES, 3-1/2" CROWN, 45?, 09 - N = 1-1/4", KNIVES ARE IN GOOD CONDITION AND READY TO USE (U.N.O.), SEE PICS FOR PROFILE
|
🔒 Subscribe | |||
|
|
L.H.R. ENT. | J 6696 |
SHAPER CUTTER, L.H.R. ENT., J 6696, RAISED PANEL CUTTER, 4" OUTSIDE DIAMETER, 1-1/4" BORE, SEE PICS FOR PROFILE
|
🔒 Subscribe | |
|
|
MOULDING KNIVES, 4-1/4= DETAIL, (4) 3/4" BEAD, F = 3/4", KNIVES ARE IN GOOD CONDITION AND READY TO USE (U.N.O.), SEE PICS FOR PROFILE
|
🔒 Subscribe | |||
|
|
WEINIG | N MAX 9000 |
WEINIG N MAX 9000 MOULDING HEAD, 1-1/2" BORE, 4-3/4" OUTSIDE DIAMETER, 4" - 4 KNIVES, GOOD CONDITION AND READY TO USE (U.N.O.), NO RUST, S/N: 017_0068 AND 071-0069
|
🔒 Subscribe | |
|
|
MOULDING KNIVES, 4 KNIVES: 6" WEDGE FLUTE KNIVES; 5/8" WIDE FLUTES; G = 13/16", OR 4 PCS 1-5/8" X 6" CLEAN STEEL, KNIVES ARE IN GOOD CONDITION AND READY TO USE (U.N.O.), SEE PICS FOR PROFILE
|
🔒 Subscribe | |||
|
|
APPROXIMATELY 90 CAST ACRYLIC TEMPLATES FOR MOULDING KNIVES, ENTIRE TABLE
|
🔒 Subscribe | |||
|
|
SHAPER CUTTER, RAISED PANEL CUTTER, 1-3/4" LONG CUT, C/C/W ROTATION, 6-1/2" OUTSIDE DIAMETER, 6 WING, 1-1/4" BORE, SEE PICS FOR PROFILE
|
🔒 Subscribe | |||
|
|
SHAPER CUTTER, RAISED PANEL CUTTER, 1-3/4" LONG CUT, C/W ROTATION, 6-1/2" OUTSIDE DIAMETER, 1-1/4" BORE, SEE PICS FOR PROFILE, /DSC3220 AND 3221
|
🔒 Subscribe | |||
|
|
MOULDING KNIVES, (4) 7/8" BEAD, 5-1/2" KNIVES, G = 13/16", KNIVES ARE IN GOOD CONDITION AND READY TO USE (U.N.O.), SEE PICS FOR PROFILE
|
🔒 Subscribe | |||
|
|
MOULDING KNIVES, 7-1/2" CROWN, 77 - O = 1-5/16", KNIVES ARE IN GOOD CONDITION AND READY TO USE (U.N.O.), SEE PICS FOR PROFILE
|
🔒 Subscribe | |||
|
|
MOULDING KNIVES, 4-3/4" CROWN, 03 - F = 3/4", KNIVES ARE IN GOOD CONDITION AND READY TO USE (U.N.O.), SEE PICS FOR PROFILE
|
🔒 Subscribe | |||
|
|
ART METAL PRODUCTS |
ART METAL PRODUCTS 2 HEAVY DUTY SCHOOL LOCKERS, 10 DOORS/UNIT, 59-1/4" WIDE X 71" TALL X 12" DEEP
|
🔒 Subscribe | ||
|
|
MURPHY RODGERS |
MURPHY RODGERS 15 HP DUST COLLECTOR WITH BAGHOUSE, 12" INLET, MECHANICAL SHAKER, MUFFLER SO IT CAN BE USED INSIDE, USES 4-55 GALLONS BARRELS FOR COLLECTION
|
🔒 Subscribe | ||
|
|
ART METAL PRODUCTS |
ART METAL PRODUCTS 2 HEAVY DUTY SCHOOL LOCKERS, 10 DOORS/UNIT, 59 -1/4" WIDE X 71" TALL X 12" DEEP
|
🔒 Subscribe | ||
|
|
MOULDING KNIVES, 3-1/2" CROWN, 05 - G = 13/16" KNIVES ARE IN GOOD CONDITION AND READY TO USE (U.N.O.), SEE PICS FOR PROFILE
|
🔒 Subscribe | |||
|
|
MOULDING KNIVES, 5-1/2" CROWN, 05 - J = 1", KNIVES ARE IN GOOD CONDITION AND READY TO USE (U.N.O.), SEE PICS FOR PROFILE
|
🔒 Subscribe | |||
|
|
MOULDING KNIVES, 2-3/8" CROWN, 05 - F = 3/4", KNIVES ARE IN GOOD CONDITION AND READY TO USE (U.N.O.), SEE PICS FOR PROFILE
|
🔒 Subscribe | |||
|
|
CHEROKEE TOOL CO. | NO. 1760.T |
SHAPER CUTTER, CHEROKEE TOOL CO. NO. 1760.T, FINGER PULL OR EDGE DETAIL, 1-1/4" THICK CUT, 3/4" WIDE DETAIL, 5" OUTSIDE DIAMETER, 4 WING, 1-5/8" BORE, SEE PICS FOR PROFILE
|
🔒 Subscribe | |
|
|
SHAPER CUTTER, RAISED PANEL CUTTER, 1-3/4" LONG CUT, DULL 5-1/2" OUTSIDE DIAMETER, 1-1/4" BORE, SEE PICS FOR PROFILE
|
🔒 Subscribe | |||
|
|
ATWOOD | SWING SAW |
ATWOOD SWING SAW
|
🔒 Subscribe | |
|
|
PICS 295, 296 |
AIR RECEIVER PICS 295, 296
|
🔒 Subscribe | ||
|
|
MOULDING KNIVES, 6" BASE/CASE, 0 - 09 - P = 1-3/8", KNIVES ARE IN GOOD CONDITION AND READY TO USE (U.N.O.), SEE PICS FOR PROFILE
|
🔒 Subscribe | |||
|
|
SHAPER CUTTER, VALLEY SAW, V- GROOVE CUTTERS FOR TABLE SAW, 45? CUTTERS, 8" OUTSIDE DIAMETER, 12 WINGS, 5/8" BORE, SEE PICS FOR PROFILE
|
🔒 Subscribe | |||
|
|
ELECTRICAL CABINET USED FOR SHAPER CUTTERS, LOCKABLE
|
🔒 Subscribe | |||
|
|
GORBEL, INC | JIB 1/4 TON HOIST |
GORBEL, INC JIB 1/4 TON HOIST, 2 - 3" X 6" X 13' STANDARD, ARM IS 1/4" X 6" X 7' I-BEAM
|
🔒 Subscribe | |
|
|
MOULDING KNIVES, 4"-6-1/4" BASE/CASE, 0-12 - G = 13/16", KNIVES ARE IN GOOD CONDITION AND READY TO USE (U.N.O.), SEE PICS FOR PROFILE
|
🔒 Subscribe | |||
|
|
WORK PLATFORM W/ SCAFFOLDING FOR FORKLIFT
|
🔒 Subscribe | |||
|
|
SHAPER CUTTER, V- G = 13/16"ROVE, 45 DEGREE AT EACH SIDE (90 INCLUDED ANGLE), 1" THICK CUT, 3/4" DEEP CUT, 4" OUTSIDE DIAMETER, 1-1/4" BORE, SEE PICS FOR PROFILE
|
🔒 Subscribe | |||
|
|
DUST COLLECTOR BARREL, 7" INLET
|
🔒 Subscribe | |||
|
|
L.R.H. ENT | K 1115 |
SHAPER CUTTER, L.R.H. ENT K 1115, EDGE DETAIL, 1" THICK CUT, 3-1/2" OUTSIDE DIAMETER, 1" BORE, SEE PICS FOR PROFILE
|
🔒 Subscribe | |
|
|
L.R.H. ENT. | K-1436 |
L.R.H. ENT. K-1436 SHAPER CUTTER (2) 5/8" RADIUS, 3/4" THICK CUT, 4" OUTSIDE DIAMETER, 1-1/4" BORE, SEE PICS FOR PROFILE, /DSC 3265
|
🔒 Subscribe | |
|
|
SHAPER CUTTER, FINGERPULL OR EDGE DETAIL, 1-1/4" THICK CUT, 3/4" WIDE CUT, 5" OUTSIDE DIAMETER, 1-1/4" BORE, SEE PICS FOR PROFILE
|
🔒 Subscribe | |||
|
|
WEINIG | N MAX. 9000 |
WEINIG N MAX. 9000 MOULDING HEAD, 1-1/2" BORE, 4-3/4" OUTSIDE DIAMETER, 5" - 4 KNIVES, GOOD CONDITION AND READY TO USE (U.N.O.), NO RUST
|
🔒 Subscribe | |
|
|
L.R.H. ENT | 853 |
SHAPER CUTTER, L.R.H. ENT 00853 FINGERPULL - EDGE DETAIL, 1" THICK CUT, 1/2" WIDE CUT, 4-1/4" OUTSIDE DIAMETER, 1-1/2' BORE, SEE PICS FOR PROFILE
|
🔒 Subscribe | |
|
|
SHAPER CUTTER, (3) STRAIGHT CUTTERS: (1) 5/16" THICK CUT X 3" OUTSIDE DIAMETER, (1) 3/8" THICK CUT X 4" OUTSIDE DIAMETER, (1) 1/2" X 3-1/2", 1-1/4" BORE, SEE PICS FOR PROFILE
|
🔒 Subscribe | |||
|
|
L.R.H. ENT. | K1422, K1424 |
SHAPER CUTTER, (2) CUTTERS: (1) L.R.H. ENT. K1422, 1/2" BULLNOSE (1/4" RADIUS), 1" THICK CUT, 3-3/4" OUTSIDE DIAMETER, 1-1/4" BORE, L.R.H. ENT. K1424, 3/4" BULLNOSE, (3/8" RADIUS). 1-1/4" THICK CUT, 3-3/4" OUTSIDE DIAMETER, 1-1/4" BORE, SEE PICS FOR PROFILE
|
🔒 Subscribe | |
|
|
SHAPER CUTTER, (5) DETAIL CUTTERS, 1/2" THICK CUT, 3-1/2" +/- OUTSIDE DIAMETER, " BORE, SEE PICS FOR PROFILE
|
🔒 Subscribe | |||
|
|
L.R.H. ENT | K 1125 |
SHAPER CUTTER, (2) DETAIL CUTTERS WITH 4" MINUS OUTSIDE DIAMETER AND 1-1/4" BORE: (1) 7/8" THICK CUT, 5/8 WIDE CUT, WITH 1/4" I/S RADIUS OR ROUNDOVER, L.R.H. ENT. K 1125, FINGERPULL OR EDGE DETAIL, 1-1/8" THICK CUT, 3/4" WIDE CUT, 3-3/4" OUTSIDE DIAMETER, 1-1/7" BORE, SEE PICS FOR PROFILE
|
🔒 Subscribe | |
|
|
TRUCK WINCH STRAPS
|
🔒 Subscribe | |||
|
|
MOULDING KNIVES, 4 RADIUS/ROUNDOVER: (1) 1/16"; (1) 1/8"; (1) 3/8"; (1) 1/4"; NO TEMPLATES, KNIVES ARE IN GOOD CONDITION AND READY TO USE (U.N.O.), SEE PICS FOR PROFILE
|
🔒 Subscribe | |||
|
|
MOULDING KNIVES, 3 RADIUS/ROUNDOVER: 1-3/32", 1-7/16", 1-5/8": NO TEMPLATES , KNIVES ARE IN GOOD CONDITION AND READY TO USE (U.N.O.), SEE PICS FOR PROFILE
|
🔒 Subscribe | |||
|
|
MOULDING KNIVES, 4 RADIUS/ROUNDOVER: (1) 3/8"; (1) 5/16"; (1) 1/2"; (1) 1/4"; NO TEMPLATES , KNIVES ARE IN GOOD CONDITION AND READY TO USE (U.N.O.), SEE PICS FOR PROFILE
|
🔒 Subscribe | |||
|
|
MOULDING KNIVES, 4 RADIUS/ROUNDOVER: 1-3/8", 1-3/8" R+; 1-1/2"; 1-1/4", NO TEMPLATES, KNIVES ARE IN GOOD CONDITION AND READY TO USE (U.N.O.), SEE PICS FOR PROFILE
|
🔒 Subscribe | |||
|
|
HYDRAULIC LIFT TABLE W/ CASTERS
|
🔒 Subscribe | |||
|
|
SHAPER CUTTER, (2) STRAIGHT CUTTERS: 3/8" X 3-1/2" OUTSIDE DIAMETER, 7/16" X 4-3/4" OUTSIDE DIAMETER, 1-1/4" BORE, SEE PICS FOR PROFILE
|
🔒 Subscribe |
CHEROKEE TOOL CO 620
SHAPER CUTTERS, CHEROKEE TOOL CO, (2) NO. 620 . 2 . T 7/8" RAIL (COPE) AND 1/4" CENTER CUTTER BOLTE...
SHAPER CUTTER, (2) CUTTERS WITH 1-1/4" BORE: MATCHING PAIR, 1/2" THICK CUT EACH, 7/16" WIDE DETAIL,
L.R.H. ENT. K1431
SHAPER CUTTER, (2) CUTTERS WITH 1-1/4" BORE: (1) L.R.H. ENT. K1431 1/4" RADIUS OR ROUNDOVER, 1/2" T...
L.R.H. ENT. OGEE X 2
SHAPER CUTTER, L.R.H. ENT. OGEE X 2 WITH STEP-FLAT, 2-1/4" THICK CUT, 5" OUTSIDE DIAMETER, 1-1/4" BO...
CHEROKEE TOOL CO.
SHAPER CUTTER, CHEROKEE TOOL CO., (2) CENTER CUTTERS: (1) 5/16" X 2-1/4, (1) 1/4" X 2-1/2", 1-1/4" B...
MOULDING KNIVES, 3-1/2" CROWN, 45?, 09 - N = 1-1/4", KNIVES ARE IN GOOD CONDITION AND READY TO USE (
L.H.R. ENT. J 6696
SHAPER CUTTER, L.H.R. ENT., J 6696, RAISED PANEL CUTTER, 4" OUTSIDE DIAMETER, 1-1/4" BORE, SEE PICS ...
MOULDING KNIVES, 4-1/4= DETAIL, (4) 3/4" BEAD, F = 3/4", KNIVES ARE IN GOOD CONDITION AND READY TO U
WEINIG N MAX 9000
WEINIG N MAX 9000 MOULDING HEAD, 1-1/2" BORE, 4-3/4" OUTSIDE DIAMETER, 4" - 4 KNIVES, GOOD CONDITION...
MOULDING KNIVES, 4 KNIVES: 6" WEDGE FLUTE KNIVES; 5/8" WIDE FLUTES; G = 13/16", OR 4 PCS 1-5/8" X 6"
APPROXIMATELY 90 CAST ACRYLIC TEMPLATES FOR MOULDING KNIVES, ENTIRE TABLE
SHAPER CUTTER, RAISED PANEL CUTTER, 1-3/4" LONG CUT, C/C/W ROTATION, 6-1/2" OUTSIDE DIAMETER, 6 WING
SHAPER CUTTER, RAISED PANEL CUTTER, 1-3/4" LONG CUT, C/W ROTATION, 6-1/2" OUTSIDE DIAMETER, 1-1/4" B
MOULDING KNIVES, (4) 7/8" BEAD, 5-1/2" KNIVES, G = 13/16", KNIVES ARE IN GOOD CONDITION AND READY TO
MOULDING KNIVES, 7-1/2" CROWN, 77 - O = 1-5/16", KNIVES ARE IN GOOD CONDITION AND READY TO USE (U.N.
MOULDING KNIVES, 4-3/4" CROWN, 03 - F = 3/4", KNIVES ARE IN GOOD CONDITION AND READY TO USE (U.N.O.)
ART METAL PRODUCTS
ART METAL PRODUCTS 2 HEAVY DUTY SCHOOL LOCKERS, 10 DOORS/UNIT, 59-1/4" WIDE X 71" TALL X 12" DEEP...
MURPHY RODGERS
MURPHY RODGERS 15 HP DUST COLLECTOR WITH BAGHOUSE, 12" INLET, MECHANICAL SHAKER, MUFFLER SO IT CAN B...
ART METAL PRODUCTS
ART METAL PRODUCTS 2 HEAVY DUTY SCHOOL LOCKERS, 10 DOORS/UNIT, 59 -1/4" WIDE X 71" TALL X 12" DEEP...
MOULDING KNIVES, 3-1/2" CROWN, 05 - G = 13/16" KNIVES ARE IN GOOD CONDITION AND READY TO USE (U.N.O.
MOULDING KNIVES, 5-1/2" CROWN, 05 - J = 1", KNIVES ARE IN GOOD CONDITION AND READY TO USE (U.N.O.),
MOULDING KNIVES, 2-3/8" CROWN, 05 - F = 3/4", KNIVES ARE IN GOOD CONDITION AND READY TO USE (U.N.O.)
CHEROKEE TOOL CO. NO. 1760.T
SHAPER CUTTER, CHEROKEE TOOL CO. NO. 1760.T, FINGER PULL OR EDGE DETAIL, 1-1/4" THICK CUT, 3/4" WIDE...
SHAPER CUTTER, RAISED PANEL CUTTER, 1-3/4" LONG CUT, DULL 5-1/2" OUTSIDE DIAMETER, 1-1/4" BORE, SEE
ATWOOD SWING SAW
ATWOOD SWING SAW...
PICS 295, 296
AIR RECEIVER PICS 295, 296...
MOULDING KNIVES, 6" BASE/CASE, 0 - 09 - P = 1-3/8", KNIVES ARE IN GOOD CONDITION AND READY TO USE (U
SHAPER CUTTER, VALLEY SAW, V- GROOVE CUTTERS FOR TABLE SAW, 45? CUTTERS, 8" OUTSIDE DIAMETER, 12 WIN
ELECTRICAL CABINET USED FOR SHAPER CUTTERS, LOCKABLE
GORBEL, INC JIB 1/4 TON HOIST
GORBEL, INC JIB 1/4 TON HOIST, 2 - 3" X 6" X 13' STANDARD, ARM IS 1/4" X 6" X 7' I-BEAM...
MOULDING KNIVES, 4"-6-1/4" BASE/CASE, 0-12 - G = 13/16", KNIVES ARE IN GOOD CONDITION AND READY TO U
WORK PLATFORM W/ SCAFFOLDING FOR FORKLIFT
SHAPER CUTTER, V- G = 13/16"ROVE, 45 DEGREE AT EACH SIDE (90 INCLUDED ANGLE), 1" THICK CUT, 3/4" DEE
DUST COLLECTOR BARREL, 7" INLET
L.R.H. ENT K 1115
SHAPER CUTTER, L.R.H. ENT K 1115, EDGE DETAIL, 1" THICK CUT, 3-1/2" OUTSIDE DIAMETER, 1" BORE, SEE P...
L.R.H. ENT. K-1436
L.R.H. ENT. K-1436 SHAPER CUTTER (2) 5/8" RADIUS, 3/4" THICK CUT, 4" OUTSIDE DIAMETER, 1-1/4" BORE, ...
SHAPER CUTTER, FINGERPULL OR EDGE DETAIL, 1-1/4" THICK CUT, 3/4" WIDE CUT, 5" OUTSIDE DIAMETER, 1-1/
WEINIG N MAX. 9000
WEINIG N MAX. 9000 MOULDING HEAD, 1-1/2" BORE, 4-3/4" OUTSIDE DIAMETER, 5" - 4 KNIVES, GOOD CONDITIO...
L.R.H. ENT 853
SHAPER CUTTER, L.R.H. ENT 00853 FINGERPULL - EDGE DETAIL, 1" THICK CUT, 1/2" WIDE CUT, 4-1/4" OUTSID...
SHAPER CUTTER, (3) STRAIGHT CUTTERS: (1) 5/16" THICK CUT X 3" OUTSIDE DIAMETER, (1) 3/8" THICK CUT X
L.R.H. ENT. K1422, K1424
SHAPER CUTTER, (2) CUTTERS: (1) L.R.H. ENT. K1422, 1/2" BULLNOSE (1/4" RADIUS), 1" THICK CUT, 3-3/4...
SHAPER CUTTER, (5) DETAIL CUTTERS, 1/2" THICK CUT, 3-1/2" +/- OUTSIDE DIAMETER, " BORE, SEE PICS FOR
L.R.H. ENT K 1125
SHAPER CUTTER, (2) DETAIL CUTTERS WITH 4" MINUS OUTSIDE DIAMETER AND 1-1/4" BORE: (1) 7/8" THICK CUT...
TRUCK WINCH STRAPS
MOULDING KNIVES, 4 RADIUS/ROUNDOVER: (1) 1/16"; (1) 1/8"; (1) 3/8"; (1) 1/4"; NO TEMPLATES, KNIVES A
MOULDING KNIVES, 3 RADIUS/ROUNDOVER: 1-3/32", 1-7/16", 1-5/8": NO TEMPLATES , KNIVES ARE IN GOOD CON
MOULDING KNIVES, 4 RADIUS/ROUNDOVER: (1) 3/8"; (1) 5/16"; (1) 1/2"; (1) 1/4"; NO TEMPLATES , KNIVES
MOULDING KNIVES, 4 RADIUS/ROUNDOVER: 1-3/8", 1-3/8" R+; 1-1/2"; 1-1/4", NO TEMPLATES, KNIVES ARE IN
HYDRAULIC LIFT TABLE W/ CASTERS
SHAPER CUTTER, (2) STRAIGHT CUTTERS: 3/8" X 3-1/2" OUTSIDE DIAMETER, 7/16" X 4-3/4" OUTSIDE DIAMETER