SPECIALIZED MILLWORK SELLING DOOR SHOP EQUIPMENT TOOLING SHAPERS CUTTERS MOULDER KNIVES MORE

Arizona Industrial Auctions

Category: SURFACE FINISHING EQUIPMENT

Total Lots: 835

Total Sales: 🔒 Subscribe

Price Distribution

🔒

Subscribe to view

Unlock price distribution and full auction analytics

Sort:

Showing 301–350 of 835 lots

Make	Model	Lot Description	Hammer Price
		MOULDING KNIVES, 2-1/4" DETAIL, R = 1-1/2", NO TEMPLATE, KNIVES ARE IN GOOD CONDITION AND READY TO USE (U.N.O.), SEE PICS FOR PROFILE	🔒 Subscribe
WESTINGHOUSE		7.5 HP BLOWER, 12" INLET WESTINGHOUSE	🔒 Subscribe
		(2) LUMBER CARTS	🔒 Subscribe
		4 ROLLUP DOORS, 10' 4", AND CART, DOORS NEVER BEEN INSTALLED	🔒 Subscribe
		MOULDING KNIVES, 4-1/2" - 8" BASE/CASE, 65 - G = 13/16", KNIVES ARE IN GOOD CONDITION AND READY TO USE (U.N.O.), SEE PICS FOR PROFILE	🔒 Subscribe
		SHAPER CUTTER, 2-1/8" THICK CUT, 3/4" STRAIGHT, 13/16" WIDE DETAIL, CARBIDE CHIPPED FROM HANDLING AT STRAIGHT ON 1 WING, 4" MAJOR OUTSIDE DIAMETER, 2-1/4" MINOR OUTSIDE DIAMETER, 1-1/4" BORE	🔒 Subscribe
		MOULDING KNIVES, 3" DETAIL, 1/2" R - 2" FLAT - 1/2" RADIUS, F = 3/4", KNIVES ARE IN GOOD CONDITION AND READY TO USE (U.N.O.), SEE PICS FOR PROFILE	🔒 Subscribe
		SHIPPING CONTAINER W/ CONTENTS, 40 PCS, 4-3/4"+/- DIAMETER X 98" LONG	🔒 Subscribe
		MOULDING KNIVES, (4) 1" BEADS, J = 1", OR 2PCS 1-3-3/8" X 5-3/8" CLEAN STEEL, NO TEMPLATE, KNIVES ARE IN GOOD CONDITION AND READY TO USE (U.N.O.), SEE PICS FOR PROFILE	🔒 Subscribe
		MOULDING KNIVES, 2-1/4" KNIFE, 1-5/8" CHAIRRAIL, 03 - J = 1", KNIVES ARE IN GOOD CONDITION AND READY TO USE (U.N.O.), SEE PICS FOR PROFILE	🔒 Subscribe
		MOULDING KNIVES, 5-1/2" CHAIRRAIL, 06 - J = 1", KNIVES ARE IN GOOD CONDITION AND READY TO USE (U.N.O.), SEE PICS FOR PROFILE	🔒 Subscribe
		MOULDING KNIVES, 3" - 5-1/4" BASE/CASE, 0 - 15 - N = 1/2", DULL, KNIVES ARE IN GOOD CONDITION AND READY TO USE (U.N.O.), SEE PICS FOR PROFILE	🔒 Subscribe
		MOULDING KNIVES, 3-1/2" - 6-1/4" BASE/CASE, 14-J = 1", DULL, KNIVES ARE IN GOOD CONDITION AND READY TO USE (U.N.O.), SEE PICS FOR PROFILE	🔒 Subscribe
		SHAPER CUTTER, RAISED PANEL CUTTER, 1-3/8" LONG CUT, 6" OUTSIDE DIAMETER, 1-1/4" BORE, SEE PICS FOR PROFILE	🔒 Subscribe
		SHAPER CUTTER, RAISED PANEL CUTTER, 1-3/8" LONG CUT, 6" OUTSIDE DIAMETER, 1" BORE, SEE PICS FOR PROFILE	🔒 Subscribe
FS TOOLS		2 MOULDING HEADS, FS TOOLS, 1-1/4" BORE, 4" OUTSIDE DIAMETER, 4 4" KNIVES, GOOD CONDITION AND READY TO USE (U.N.O.), NO RUST FS TOOLS	🔒 Subscribe
		MOULDING KNIVES, 1-3/4"- 4" BASE/CASE, 0 - 33 - P = 1-3/8", KNIVES ARE IN GOOD CONDITION AND READY TO USE (U.N.O.), SEE PICS FOR PROFILE	🔒 Subscribe
		MOULDING KNIVES, 1-5/8" CROWN, 15 - F = 3/4", KNIVES ARE IN GOOD CONDITION AND READY TO USE (U.N.O.), SEE PICS FOR PROFILE	🔒 Subscribe
		SHAPER CUTTER, HILTON FINGER PULL EDGE DETAIL, 1-1/2" THICK CUT, 1" WIDE, 4-1/4" OUTSIDE DIAMETER, 3/4" BORE, SEE PICS FOR PROFILE	🔒 Subscribe
FREUD	EC123	FREUD EC123 SHAPER CUTTER, NEW, 5/8" BULLNOSE, 5/16" RADIUS, USED FOR TOP RADIUS ON 1/2" / 12MM DRAWERSIDES, 2-3/4" OUTSIDE DIAMETER, 3/4" BORE, SEE PICS FOR PROFILE FREUD · EC123	🔒 Subscribe
FREUD	EC123	SHAPER CUTTER, 1 FREUD EC123, 5/8" BULLNOSE, 5/16" RADIUS, USED TO RADIUS TOP OF 1/2"/12MM DRAWERSIDES, 2-3/4" OUTSIDE DIAMETER, 3/4" BORE, SEE PICS FOR PROFILE FREUD · EC123	🔒 Subscribe
		SHAPER CUTTER, 3/4" RADIUS, 1-3/4" THICK CUT, 3-3/8" OUTSIDE DIAMETER, 3/4" BORE, SEE PICS FOR PROFILE	🔒 Subscribe
		SHAPER CUTTER, EDGE DETAIL, 3-3/4" OUTSIDE DIAMETER, 3/4' BORE, SEE PICS FOR PROFILE	🔒 Subscribe
		SHAPER CUTTER, FINGER PULL - EDGE DETAIL, 4-14" OUTSIDE DIAMETER, 3/4" BORE, SEE PICS FOR PROFILE	🔒 Subscribe
CHEROKEE TOOL CO.		SHAPER CUTTER, CHEROKEE TOOL CO., (2) 1/4" X 2-1/2", DULL, 1-1/4" BORE, SEE PICS FOR PROFILE CHEROKEE TOOL CO.	🔒 Subscribe
CHEROKEE TOOL CO	620	SHAPER CUTTERS, CHEROKEE TOOL CO - (2) NO. 620 . 1 . T, 7/8" STILE (STICK) CUTTERS AND 3/4" CENTER CUTTER BOLTED TOGETHER, (2) NO. 620 . 2 . T 7/8" RAIL (COPE) CUTTERS AND 3/4" CENTER CUTTER BOLTED TOGETHER, 2-1/2" + THICK CUT, 5-7/8" OUTSIDE DIAMETER, 4 WING, 50MM BORE, SEE PICS FOR PROFILE 620, CUTTERS ARE SHARP AND IN GOOD CONDITION WITH TANTUNG WELDED INSERTS CHEROKEE TOOL CO · 620	🔒 Subscribe
CHEROKEE TOOL CO	620	SHAPER CUTTERS, CHEROKEE TOOL CO NO. 620 . 1 . M, -7/8" STILE (STICK) CUTTER AND 1-3/4" SASH CUTTER BOLTED TOGETHER, 4-7/8" OUTSIDE DIAMETER, 4 WING, 1-1/2" BORE, SEE PICS FOR PROFILE 620, CUTTERS ARE SHARP AND IN GOOD CONDITION WITH TANTUNG WELDED INSERTS CHEROKEE TOOL CO · 620	🔒 Subscribe
		MOULDING KNIVES, 3-1/2" - 5" CHAIRRAIL, 07- G = 13/16", KNIVES ARE IN GOOD CONDITION AND READY TO USE (U.N.O.), SEE PICS FOR PROFILE	🔒 Subscribe
		6 ROLLS OF 7" WIDE GRAPHITE CLOTH, ROLLS ARE PROBABLY 10 YARDS EACH	🔒 Subscribe
		WHITE PINE LUMBER	🔒 Subscribe
		SHAPER CUTTER, 6 WING HEAD WITH CARBIDE INSERTS, 3/8" MODIFIED OPEN RADIUS OR ROUNDOVER, 1-3/8" THICK CUT, 7" OUTSIDE DIAMETER, 1-1/4" BORE WITH 1" T BUSHING, SEE PICS FOR PROFILE	🔒 Subscribe
		MOULDING KNIVES, 3/4" BULLNOSE, 3/8" RADIUS, G = 13/16", KNIVES ARE IN GOOD CONDITION AND READY TO USE (U.N.O.), SEE PICS FOR PROFILE	🔒 Subscribe
CHEROKEE TOOL CO	NO. ??	SHAPER CUTTER, CHEROKEE TOOL CO NO. ??, (2) MATCHING CUTTERS, 1/2" THICK CUT EACH, 4" OUTSIDE DIAMETER, 1-1/4" BORE, SEE PICS FOR PROFILE CHEROKEE TOOL CO · NO. ??	🔒 Subscribe
		MOULDING KNIVES, 7" BACK RELIEF, NO TEMPLATE, DULL, KNIVES ARE IN GOOD CONDITION AND READY TO USE (U.N.O.), SEE PICS FOR PROFILE	🔒 Subscribe
		MOULDING KNIVES, 7-1/4" BACK RELIEF, NO TEMPLATE, NARROW KNIFE 3/4", KNIVES ARE IN GOOD CONDITION AND READY TO USE (U.N.O.), SEE PICS FOR PROFILE	🔒 Subscribe
WEINIG	N MAX 9000	WEINIG N MAX 9000 MOULDING HEAD, 1-1/2" BORE, 4-3/4" OUTSIDE DIAMETER, 4" - 4 KNIVES, GOOD CONDITION AND READY TO USE (U.N.O.), NO RUST S/N: 017_0046 AND 017-0047 WEINIG · N MAX 9000	🔒 Subscribe
WEINIG	N MAX 9000	WEINIG N MAX 9000 MOULDING HEAD, 1-1/2" BORE, 4-3/4" OUTSIDE DIAMETER, 4" - 4 KNIVES, GOOD CONDITION AND READY TO USE (U.N.O.), NO RUST, S/N: 017_0048 AND 017-0049 WEINIG · N MAX 9000	🔒 Subscribe
WEINIG	N MAX 9000	WEINIG N MAX 9000 MOULDING HEAD, 1-1/2" BORE, 4-3/4" OUTSIDE DIAMETER, 4" - 4" KNIVES, GOOD CONDITION AND READY TO USE (U.N.O.), NO RUST, S/N: 017_0050 AND 017-0051 WEINIG · N MAX 9000	🔒 Subscribe
WEINIG	N MAX 9000	WEINIG N MAX 9000 MOULDING HEAD, 1-1/2" BORE, 4-3/4" OUTSIDE DIAMETER, 5" - 4 KNIVES, GOOD CONDITION AND READY TO USE (U.N.O.), NO RUST S/N: 017_0052 WEINIG · N MAX 9000	🔒 Subscribe
L.R.H. ENT.	K2007	L.R.H. ENT. K2007 SHAPER CUTTER, 1-1/4" THICK CUT, 1-1/4" WIDE CUT , 5-3/4" OUTSIDE DIAMETER, 1-1/4" BORE, SEE PICS FOR PROFILE L.R.H. ENT. · K2007	🔒 Subscribe
		SHAPER CUTTER, (3) STRAIGHT CUTTERS: (1) 1/4" X 2-3/4" OUTSIDE DIAMETER, (1) 1/2" X 3-1/2" OUTSIDE DIAMETER, (1) 1/2" X 3-1/2" OUTSIDE DIAMETER WITH 1/32" RADIUS AT 1 CORNER, 1-1/4" BORE, SEE PICS FOR PROFILE, /DSC3288	🔒 Subscribe
WEINIG	N MAX 9000	WEINIG N MAX 9000 MOULDING HEAD, 1-1/2" BORE, 4-3/4" OUTSIDE DIAMETER, 5" - 4 KNIVES WEINIG · N MAX 9000	🔒 Subscribe
WEINIG	N MAX 9000	2 MOULDING HEADS, WEINIG N MAX 9000, (2) 1-1/2" BORE, 4-3/4" OUTSIDE DIAMETER, 4" - 4 KNIVES, GOOD CONDITION AND READY TO USE (U.N.O.), NO RUST WEINIG · N MAX 9000	🔒 Subscribe
		MOULDING KNIVES, 2-5/8" - 3-5/8" BASE/CASE, 0 - 01 -T = 1-5/8", DULL, KNIVES ARE IN GOOD CONDITION AND READY TO USE (U.N.O.), SEE PICS FOR PROFILE	🔒 Subscribe
		MOULDING KNIVES, 2-1/2" - 7" BASE/CASE, 15- G = 13/16" = 13/16", KNIVES ARE IN GOOD CONDITION AND READY TO USE (U.N.O.), SEE PICS FOR PROFILE	🔒 Subscribe
		MOULDING KNIVES, 3-1/4"- 5-1/2" BASE/CASE, 45 - J = 1", DULL, KNIVES ARE IN GOOD CONDITION AND READY TO USE (U.N.O.), SEE PICS FOR PROFILE	🔒 Subscribe
		MOULDING KNIVES, 2-3/4"- 6" BASE/CASE, 49 - F = 3/4", KNIVES ARE IN GOOD CONDITION AND READY TO USE (U.N.O.), SEE PICS FOR PROFILE	🔒 Subscribe
		MOULDING KNIVES, 2-1/2"- 7" BASE/CASE, 52 - E = 11/16", KNIVES ARE IN GOOD CONDITION AND READY TO USE (U.N.O.), SEE PICS FOR PROFILE	🔒 Subscribe
		MOULDING KNIVES, 3-1/2"- 8-1/2" BASE/CASE, 48 - L = 1-1/8", DULL, KNIVES ARE IN GOOD CONDITION AND READY TO USE (U.N.O.), SEE PICS FOR PROFILE	🔒 Subscribe
		MOULDING KNIVES, 3-1/2"- 6-1/4" BASE/CASE, 14 - J = 1", KNIVES ARE IN GOOD CONDITION AND READY TO USE (U.N.O.), SEE PICS FOR PROFILE	🔒 Subscribe

Make	Model	Description	Price
		MOULDING KNIVES, 2-1/4" DETAIL, R = 1-1/2", NO TEMPLATE, KNIVES ARE IN GOOD CONDITION AND READY TO USE (U.N.O.), SEE PICS FOR PROFILE	🔒 Subscribe
WESTINGHOUSE		7.5 HP BLOWER, 12" INLET	🔒 Subscribe
		(2) LUMBER CARTS	🔒 Subscribe
		4 ROLLUP DOORS, 10' 4", AND CART, DOORS NEVER BEEN INSTALLED	🔒 Subscribe
		MOULDING KNIVES, 4-1/2" - 8" BASE/CASE, 65 - G = 13/16", KNIVES ARE IN GOOD CONDITION AND READY TO USE (U.N.O.), SEE PICS FOR PROFILE	🔒 Subscribe
		SHAPER CUTTER, 2-1/8" THICK CUT, 3/4" STRAIGHT, 13/16" WIDE DETAIL, CARBIDE CHIPPED FROM HANDLING AT STRAIGHT ON 1 WING, 4" MAJOR OUTSIDE DIAMETER, 2-1/4" MINOR OUTSIDE DIAMETER, 1-1/4" BORE	🔒 Subscribe
		MOULDING KNIVES, 3" DETAIL, 1/2" R - 2" FLAT - 1/2" RADIUS, F = 3/4", KNIVES ARE IN GOOD CONDITION AND READY TO USE (U.N.O.), SEE PICS FOR PROFILE	🔒 Subscribe
		SHIPPING CONTAINER W/ CONTENTS, 40 PCS, 4-3/4"+/- DIAMETER X 98" LONG	🔒 Subscribe
		MOULDING KNIVES, (4) 1" BEADS, J = 1", OR 2PCS 1-3-3/8" X 5-3/8" CLEAN STEEL, NO TEMPLATE, KNIVES ARE IN GOOD CONDITION AND READY TO USE (U.N.O.), SEE PICS FOR PROFILE	🔒 Subscribe
		MOULDING KNIVES, 2-1/4" KNIFE, 1-5/8" CHAIRRAIL, 03 - J = 1", KNIVES ARE IN GOOD CONDITION AND READY TO USE (U.N.O.), SEE PICS FOR PROFILE	🔒 Subscribe
		MOULDING KNIVES, 5-1/2" CHAIRRAIL, 06 - J = 1", KNIVES ARE IN GOOD CONDITION AND READY TO USE (U.N.O.), SEE PICS FOR PROFILE	🔒 Subscribe
		MOULDING KNIVES, 3" - 5-1/4" BASE/CASE, 0 - 15 - N = 1/2", DULL, KNIVES ARE IN GOOD CONDITION AND READY TO USE (U.N.O.), SEE PICS FOR PROFILE	🔒 Subscribe
		MOULDING KNIVES, 3-1/2" - 6-1/4" BASE/CASE, 14-J = 1", DULL, KNIVES ARE IN GOOD CONDITION AND READY TO USE (U.N.O.), SEE PICS FOR PROFILE	🔒 Subscribe
		SHAPER CUTTER, RAISED PANEL CUTTER, 1-3/8" LONG CUT, 6" OUTSIDE DIAMETER, 1-1/4" BORE, SEE PICS FOR PROFILE	🔒 Subscribe
		SHAPER CUTTER, RAISED PANEL CUTTER, 1-3/8" LONG CUT, 6" OUTSIDE DIAMETER, 1" BORE, SEE PICS FOR PROFILE	🔒 Subscribe
FS TOOLS		2 MOULDING HEADS, FS TOOLS, 1-1/4" BORE, 4" OUTSIDE DIAMETER, 4 4" KNIVES, GOOD CONDITION AND READY TO USE (U.N.O.), NO RUST	🔒 Subscribe
		MOULDING KNIVES, 1-3/4"- 4" BASE/CASE, 0 - 33 - P = 1-3/8", KNIVES ARE IN GOOD CONDITION AND READY TO USE (U.N.O.), SEE PICS FOR PROFILE	🔒 Subscribe
		MOULDING KNIVES, 1-5/8" CROWN, 15 - F = 3/4", KNIVES ARE IN GOOD CONDITION AND READY TO USE (U.N.O.), SEE PICS FOR PROFILE	🔒 Subscribe
		SHAPER CUTTER, HILTON FINGER PULL EDGE DETAIL, 1-1/2" THICK CUT, 1" WIDE, 4-1/4" OUTSIDE DIAMETER, 3/4" BORE, SEE PICS FOR PROFILE	🔒 Subscribe
FREUD	EC123	FREUD EC123 SHAPER CUTTER, NEW, 5/8" BULLNOSE, 5/16" RADIUS, USED FOR TOP RADIUS ON 1/2" / 12MM DRAWERSIDES, 2-3/4" OUTSIDE DIAMETER, 3/4" BORE, SEE PICS FOR PROFILE	🔒 Subscribe
FREUD	EC123	SHAPER CUTTER, 1 FREUD EC123, 5/8" BULLNOSE, 5/16" RADIUS, USED TO RADIUS TOP OF 1/2"/12MM DRAWERSIDES, 2-3/4" OUTSIDE DIAMETER, 3/4" BORE, SEE PICS FOR PROFILE	🔒 Subscribe
		SHAPER CUTTER, 3/4" RADIUS, 1-3/4" THICK CUT, 3-3/8" OUTSIDE DIAMETER, 3/4" BORE, SEE PICS FOR PROFILE	🔒 Subscribe
		SHAPER CUTTER, EDGE DETAIL, 3-3/4" OUTSIDE DIAMETER, 3/4' BORE, SEE PICS FOR PROFILE	🔒 Subscribe
		SHAPER CUTTER, FINGER PULL - EDGE DETAIL, 4-14" OUTSIDE DIAMETER, 3/4" BORE, SEE PICS FOR PROFILE	🔒 Subscribe
CHEROKEE TOOL CO.		SHAPER CUTTER, CHEROKEE TOOL CO., (2) 1/4" X 2-1/2", DULL, 1-1/4" BORE, SEE PICS FOR PROFILE	🔒 Subscribe
CHEROKEE TOOL CO	620	SHAPER CUTTERS, CHEROKEE TOOL CO - (2) NO. 620 . 1 . T, 7/8" STILE (STICK) CUTTERS AND 3/4" CENTER CUTTER BOLTED TOGETHER, (2) NO. 620 . 2 . T 7/8" RAIL (COPE) CUTTERS AND 3/4" CENTER CUTTER BOLTED TOGETHER, 2-1/2" + THICK CUT, 5-7/8" OUTSIDE DIAMETER, 4 WING, 50MM BORE, SEE PICS FOR PROFILE 620, CUTTERS ARE SHARP AND IN GOOD CONDITION WITH TANTUNG WELDED INSERTS	🔒 Subscribe
CHEROKEE TOOL CO	620	SHAPER CUTTERS, CHEROKEE TOOL CO NO. 620 . 1 . M, -7/8" STILE (STICK) CUTTER AND 1-3/4" SASH CUTTER BOLTED TOGETHER, 4-7/8" OUTSIDE DIAMETER, 4 WING, 1-1/2" BORE, SEE PICS FOR PROFILE 620, CUTTERS ARE SHARP AND IN GOOD CONDITION WITH TANTUNG WELDED INSERTS	🔒 Subscribe
		MOULDING KNIVES, 3-1/2" - 5" CHAIRRAIL, 07- G = 13/16", KNIVES ARE IN GOOD CONDITION AND READY TO USE (U.N.O.), SEE PICS FOR PROFILE	🔒 Subscribe
		6 ROLLS OF 7" WIDE GRAPHITE CLOTH, ROLLS ARE PROBABLY 10 YARDS EACH	🔒 Subscribe
		WHITE PINE LUMBER	🔒 Subscribe
		SHAPER CUTTER, 6 WING HEAD WITH CARBIDE INSERTS, 3/8" MODIFIED OPEN RADIUS OR ROUNDOVER, 1-3/8" THICK CUT, 7" OUTSIDE DIAMETER, 1-1/4" BORE WITH 1" T BUSHING, SEE PICS FOR PROFILE	🔒 Subscribe
		MOULDING KNIVES, 3/4" BULLNOSE, 3/8" RADIUS, G = 13/16", KNIVES ARE IN GOOD CONDITION AND READY TO USE (U.N.O.), SEE PICS FOR PROFILE	🔒 Subscribe
CHEROKEE TOOL CO	NO. ??	SHAPER CUTTER, CHEROKEE TOOL CO NO. ??, (2) MATCHING CUTTERS, 1/2" THICK CUT EACH, 4" OUTSIDE DIAMETER, 1-1/4" BORE, SEE PICS FOR PROFILE	🔒 Subscribe
		MOULDING KNIVES, 7" BACK RELIEF, NO TEMPLATE, DULL, KNIVES ARE IN GOOD CONDITION AND READY TO USE (U.N.O.), SEE PICS FOR PROFILE	🔒 Subscribe
		MOULDING KNIVES, 7-1/4" BACK RELIEF, NO TEMPLATE, NARROW KNIFE 3/4", KNIVES ARE IN GOOD CONDITION AND READY TO USE (U.N.O.), SEE PICS FOR PROFILE	🔒 Subscribe
WEINIG	N MAX 9000	WEINIG N MAX 9000 MOULDING HEAD, 1-1/2" BORE, 4-3/4" OUTSIDE DIAMETER, 4" - 4 KNIVES, GOOD CONDITION AND READY TO USE (U.N.O.), NO RUST S/N: 017_0046 AND 017-0047	🔒 Subscribe
WEINIG	N MAX 9000	WEINIG N MAX 9000 MOULDING HEAD, 1-1/2" BORE, 4-3/4" OUTSIDE DIAMETER, 4" - 4 KNIVES, GOOD CONDITION AND READY TO USE (U.N.O.), NO RUST, S/N: 017_0048 AND 017-0049	🔒 Subscribe
WEINIG	N MAX 9000	WEINIG N MAX 9000 MOULDING HEAD, 1-1/2" BORE, 4-3/4" OUTSIDE DIAMETER, 4" - 4" KNIVES, GOOD CONDITION AND READY TO USE (U.N.O.), NO RUST, S/N: 017_0050 AND 017-0051	🔒 Subscribe
WEINIG	N MAX 9000	WEINIG N MAX 9000 MOULDING HEAD, 1-1/2" BORE, 4-3/4" OUTSIDE DIAMETER, 5" - 4 KNIVES, GOOD CONDITION AND READY TO USE (U.N.O.), NO RUST S/N: 017_0052	🔒 Subscribe
L.R.H. ENT.	K2007	L.R.H. ENT. K2007 SHAPER CUTTER, 1-1/4" THICK CUT, 1-1/4" WIDE CUT , 5-3/4" OUTSIDE DIAMETER, 1-1/4" BORE, SEE PICS FOR PROFILE	🔒 Subscribe
		SHAPER CUTTER, (3) STRAIGHT CUTTERS: (1) 1/4" X 2-3/4" OUTSIDE DIAMETER, (1) 1/2" X 3-1/2" OUTSIDE DIAMETER, (1) 1/2" X 3-1/2" OUTSIDE DIAMETER WITH 1/32" RADIUS AT 1 CORNER, 1-1/4" BORE, SEE PICS FOR PROFILE, /DSC3288	🔒 Subscribe
WEINIG	N MAX 9000	WEINIG N MAX 9000 MOULDING HEAD, 1-1/2" BORE, 4-3/4" OUTSIDE DIAMETER, 5" - 4 KNIVES	🔒 Subscribe
WEINIG	N MAX 9000	2 MOULDING HEADS, WEINIG N MAX 9000, (2) 1-1/2" BORE, 4-3/4" OUTSIDE DIAMETER, 4" - 4 KNIVES, GOOD CONDITION AND READY TO USE (U.N.O.), NO RUST	🔒 Subscribe
		MOULDING KNIVES, 2-5/8" - 3-5/8" BASE/CASE, 0 - 01 -T = 1-5/8", DULL, KNIVES ARE IN GOOD CONDITION AND READY TO USE (U.N.O.), SEE PICS FOR PROFILE	🔒 Subscribe
		MOULDING KNIVES, 2-1/2" - 7" BASE/CASE, 15- G = 13/16" = 13/16", KNIVES ARE IN GOOD CONDITION AND READY TO USE (U.N.O.), SEE PICS FOR PROFILE	🔒 Subscribe
		MOULDING KNIVES, 3-1/4"- 5-1/2" BASE/CASE, 45 - J = 1", DULL, KNIVES ARE IN GOOD CONDITION AND READY TO USE (U.N.O.), SEE PICS FOR PROFILE	🔒 Subscribe
		MOULDING KNIVES, 2-3/4"- 6" BASE/CASE, 49 - F = 3/4", KNIVES ARE IN GOOD CONDITION AND READY TO USE (U.N.O.), SEE PICS FOR PROFILE	🔒 Subscribe
		MOULDING KNIVES, 2-1/2"- 7" BASE/CASE, 52 - E = 11/16", KNIVES ARE IN GOOD CONDITION AND READY TO USE (U.N.O.), SEE PICS FOR PROFILE	🔒 Subscribe
		MOULDING KNIVES, 3-1/2"- 8-1/2" BASE/CASE, 48 - L = 1-1/8", DULL, KNIVES ARE IN GOOD CONDITION AND READY TO USE (U.N.O.), SEE PICS FOR PROFILE	🔒 Subscribe
		MOULDING KNIVES, 3-1/2"- 6-1/4" BASE/CASE, 14 - J = 1", KNIVES ARE IN GOOD CONDITION AND READY TO USE (U.N.O.), SEE PICS FOR PROFILE	🔒 Subscribe

MOULDING KNIVES, 2-1/4" DETAIL, R = 1-1/2", NO TEMPLATE, KNIVES ARE IN GOOD CONDITION AND READY TO U

WESTINGHOUSE

7.5 HP BLOWER, 12" INLET...

(2) LUMBER CARTS

4 ROLLUP DOORS, 10' 4", AND CART, DOORS NEVER BEEN INSTALLED

MOULDING KNIVES, 4-1/2" - 8" BASE/CASE, 65 - G = 13/16", KNIVES ARE IN GOOD CONDITION AND READY TO U

SHAPER CUTTER, 2-1/8" THICK CUT, 3/4" STRAIGHT, 13/16" WIDE DETAIL, CARBIDE CHIPPED FROM HANDLING AT

MOULDING KNIVES, 3" DETAIL, 1/2" R - 2" FLAT - 1/2" RADIUS, F = 3/4", KNIVES ARE IN GOOD CONDITION A

SHIPPING CONTAINER W/ CONTENTS, 40 PCS, 4-3/4"+/- DIAMETER X 98" LONG

MOULDING KNIVES, (4) 1" BEADS, J = 1", OR 2PCS 1-3-3/8" X 5-3/8" CLEAN STEEL, NO TEMPLATE, KNIVES AR

MOULDING KNIVES, 2-1/4" KNIFE, 1-5/8" CHAIRRAIL, 03 - J = 1", KNIVES ARE IN GOOD CONDITION AND READY

MOULDING KNIVES, 5-1/2" CHAIRRAIL, 06 - J = 1", KNIVES ARE IN GOOD CONDITION AND READY TO USE (U.N.O

MOULDING KNIVES, 3" - 5-1/4" BASE/CASE, 0 - 15 - N = 1/2", DULL, KNIVES ARE IN GOOD CONDITION AND RE

MOULDING KNIVES, 3-1/2" - 6-1/4" BASE/CASE, 14-J = 1", DULL, KNIVES ARE IN GOOD CONDITION AND READY

SHAPER CUTTER, RAISED PANEL CUTTER, 1-3/8" LONG CUT, 6" OUTSIDE DIAMETER, 1-1/4" BORE, SEE PICS FOR

SHAPER CUTTER, RAISED PANEL CUTTER, 1-3/8" LONG CUT, 6" OUTSIDE DIAMETER, 1" BORE, SEE PICS FOR PROF

FS TOOLS

2 MOULDING HEADS, FS TOOLS, 1-1/4" BORE, 4" OUTSIDE DIAMETER, 4 4" KNIVES, GOOD CONDITION AND READY ...

MOULDING KNIVES, 1-3/4"- 4" BASE/CASE, 0 - 33 - P = 1-3/8", KNIVES ARE IN GOOD CONDITION AND READY T

MOULDING KNIVES, 1-5/8" CROWN, 15 - F = 3/4", KNIVES ARE IN GOOD CONDITION AND READY TO USE (U.N.O.)

SHAPER CUTTER, HILTON FINGER PULL EDGE DETAIL, 1-1/2" THICK CUT, 1" WIDE, 4-1/4" OUTSIDE DIAMETER, 3

FREUD EC123

FREUD EC123 SHAPER CUTTER, NEW, 5/8" BULLNOSE, 5/16" RADIUS, USED FOR TOP RADIUS ON 1/2" / 12MM DRAW...

FREUD EC123

SHAPER CUTTER, 1 FREUD EC123, 5/8" BULLNOSE, 5/16" RADIUS, USED TO RADIUS TOP OF 1/2"/12MM DRAWERSID...

SHAPER CUTTER, 3/4" RADIUS, 1-3/4" THICK CUT, 3-3/8" OUTSIDE DIAMETER, 3/4" BORE, SEE PICS FOR PROFI

SHAPER CUTTER, EDGE DETAIL, 3-3/4" OUTSIDE DIAMETER, 3/4' BORE, SEE PICS FOR PROFILE

SHAPER CUTTER, FINGER PULL - EDGE DETAIL, 4-14" OUTSIDE DIAMETER, 3/4" BORE, SEE PICS FOR PROFILE

CHEROKEE TOOL CO.

SHAPER CUTTER, CHEROKEE TOOL CO., (2) 1/4" X 2-1/2", DULL, 1-1/4" BORE, SEE PICS FOR PROFILE...

CHEROKEE TOOL CO 620

SHAPER CUTTERS, CHEROKEE TOOL CO - (2) NO. 620 . 1 . T, 7/8" STILE (STICK) CUTTERS AND 3/4" CENTER C...

CHEROKEE TOOL CO 620

SHAPER CUTTERS, CHEROKEE TOOL CO NO. 620 . 1 . M, -7/8" STILE (STICK) CUTTER AND 1-3/4" SASH CUTTER ...

MOULDING KNIVES, 3-1/2" - 5" CHAIRRAIL, 07- G = 13/16", KNIVES ARE IN GOOD CONDITION AND READY TO US

6 ROLLS OF 7" WIDE GRAPHITE CLOTH, ROLLS ARE PROBABLY 10 YARDS EACH

WHITE PINE LUMBER

SHAPER CUTTER, 6 WING HEAD WITH CARBIDE INSERTS, 3/8" MODIFIED OPEN RADIUS OR ROUNDOVER, 1-3/8" THIC

MOULDING KNIVES, 3/4" BULLNOSE, 3/8" RADIUS, G = 13/16", KNIVES ARE IN GOOD CONDITION AND READY TO U

CHEROKEE TOOL CO NO. ??

SHAPER CUTTER, CHEROKEE TOOL CO NO. ??, (2) MATCHING CUTTERS, 1/2" THICK CUT EACH, 4" OUTSIDE DIAMET...

MOULDING KNIVES, 7" BACK RELIEF, NO TEMPLATE, DULL, KNIVES ARE IN GOOD CONDITION AND READY TO USE (U

MOULDING KNIVES, 7-1/4" BACK RELIEF, NO TEMPLATE, NARROW KNIFE 3/4", KNIVES ARE IN GOOD CONDITION AN

WEINIG N MAX 9000

WEINIG N MAX 9000 MOULDING HEAD, 1-1/2" BORE, 4-3/4" OUTSIDE DIAMETER, 4" - 4 KNIVES, GOOD CONDITION...

WEINIG N MAX 9000

WEINIG N MAX 9000 MOULDING HEAD, 1-1/2" BORE, 4-3/4" OUTSIDE DIAMETER, 4" - 4 KNIVES, GOOD CONDITION...

WEINIG N MAX 9000

WEINIG N MAX 9000 MOULDING HEAD, 1-1/2" BORE, 4-3/4" OUTSIDE DIAMETER, 4" - 4" KNIVES, GOOD CONDITIO...

WEINIG N MAX 9000

WEINIG N MAX 9000 MOULDING HEAD, 1-1/2" BORE, 4-3/4" OUTSIDE DIAMETER, 5" - 4 KNIVES, GOOD CONDITION...

L.R.H. ENT. K2007

L.R.H. ENT. K2007 SHAPER CUTTER, 1-1/4" THICK CUT, 1-1/4" WIDE CUT , 5-3/4" OUTSIDE DIAMETER, 1-1/4"...

SHAPER CUTTER, (3) STRAIGHT CUTTERS: (1) 1/4" X 2-3/4" OUTSIDE DIAMETER, (1) 1/2" X 3-1/2" OUTSIDE D

WEINIG N MAX 9000

WEINIG N MAX 9000 MOULDING HEAD, 1-1/2" BORE, 4-3/4" OUTSIDE DIAMETER, 5" - 4 KNIVES...

WEINIG N MAX 9000

2 MOULDING HEADS, WEINIG N MAX 9000, (2) 1-1/2" BORE, 4-3/4" OUTSIDE DIAMETER, 4" - 4 KNIVES, GOOD C...

MOULDING KNIVES, 2-5/8" - 3-5/8" BASE/CASE, 0 - 01 -T = 1-5/8", DULL, KNIVES ARE IN GOOD CONDITION A

MOULDING KNIVES, 2-1/2" - 7" BASE/CASE, 15- G = 13/16" = 13/16", KNIVES ARE IN GOOD CONDITION AND RE

MOULDING KNIVES, 3-1/4"- 5-1/2" BASE/CASE, 45 - J = 1", DULL, KNIVES ARE IN GOOD CONDITION AND READY

MOULDING KNIVES, 2-3/4"- 6" BASE/CASE, 49 - F = 3/4", KNIVES ARE IN GOOD CONDITION AND READY TO USE

MOULDING KNIVES, 2-1/2"- 7" BASE/CASE, 52 - E = 11/16", KNIVES ARE IN GOOD CONDITION AND READY TO US

MOULDING KNIVES, 3-1/2"- 8-1/2" BASE/CASE, 48 - L = 1-1/8", DULL, KNIVES ARE IN GOOD CONDITION AND R

MOULDING KNIVES, 3-1/2"- 6-1/4" BASE/CASE, 14 - J = 1", KNIVES ARE IN GOOD CONDITION AND READY TO US

<< Previous 5 6 7 8 9 ... 17 Next >>

Recent Searches

Login

Reset Password

SPECIALIZED MILLWORK SELLING DOOR SHOP EQUIPMENT TOOLING SHAPERS CUTTERS MOULDER KNIVES MORE

Save to Project Folder

Print Options

Unlock Unlimited Printing