Monthly SIGMA Showroom Floor Auction

SIGMA Auction

Category: MATERIAL HANDLING & WAREHOUSE EQUIPMENT

Total Lots: 191

Total Sales: 🔒 Subscribe

Lot Price Distribution

🔒

Subscribe to view

Unlock price distribution and full auction analytics

Sort:

Showing 1–50 of 191 lots

Year	Make	Model	Lot Description	Hammer Price
	WEILER	MH30	WEILER MH30 STAINLESS STEEL INCLINE AUGER CONVEYOR 16" DIAMETER - USED WEILER AUGER CONVEYOR WITH: INCLINED AUGER SPECS: DIAMETER: 16 INCHES CENTERS: 15 INCHES SHAFT: 6 INCHES HOPPER INFEED HEIGHT: 57 INCHES DISCHARGE HEIGHT: 87 INCHES VOLTAGE REQUIREMENT: 460V STAINLESS STEEL CONSTRUCTION WEILER · MH30	🔒 Subscribe
	WEILER	MH30	WEILER MH30 STAINLESS STEEL INCLINE AUGER CONVEYOR - USED WEILER AUGER CONVEYOR WITH: INCLINED INFEED HOPPER: AUGER AGITATED: DIAMETER: 16 INCHES CENTERS: 15 INCHES SHAFT: 6 INCHES LENGTH: 56 INCHES WIDTH: 80 INCHES INFEED HEIGHT: 57 INCHES DISCHARGE HEIGHT: 90 INCHES VOLTAGE REQUIREMENT: 460V STAINLESS STEEL CONSTRUCTION WEILER · MH30	🔒 Subscribe
	HOBART	4356	HOBART 4356 MIXER GRINDER WITH: PRODUCTION RATE: UP TO 160 POUNDS PER MINUTE CAPACITY: 500 POUNDS OVERALL DIMENSIONS: LENGTH: APPROXIMATELY 72 INCHES WIDTH: APPROXIMATELY 41 INCHES HEIGHT: APPROXIMATELY 96 INCHES STAINLESS STEEL CONSTRUCTION 0.5 HORSEPOWER MOTOR ELECTRICAL: 208-230/460 VOLTS, 60 HZ, PHASE 3 HOBART · 4356	🔒 Subscribe
	RITE HITE	LITESPEED	RITE HITE LITESPEED HIGH PERFORMANCE ROLL UP DOOR WITH: LIFTING SPEED: UP TO 65 INCHES PER SECOND OVERALL DIMENSIONS WIDTH: 120 INCHES HEIGHT: 120 INCHES ELECTRICAL: 460 VOLTS, 60 HZ, PHASE 3 RITE HITE · LITESPEED	🔒 Subscribe
	LANTECH	C-300	LANTECH C-300 CASE ERECTOR WITH: OUTPUT: UP TO 10 CASES PER MINUTE CASE SIZE RANGE: MINIMUM (INCHES): 7.875 LONG X 5.875 WIDE X 5.875 HIGH MAXIMUM (INCHES): 19.625 LONG X 13.75 WIDE X 20.75 HIGH LEFT HANDED CASES BOTTOM TAPE HEAD MAGAZINE CAPACITY: 200 CASES AIR SUPPLY: 6 BAR (80 PSI) ELECTRICAL REQUIREMENTS: 230 VOLTS, 3 PH, 60 HZ LANTECH · C-300	🔒 Subscribe
	LANTECH	C-300	LANTECH C-300 CASE ERECTOR WITH: CASE SIZE RANGE: MINIMUM (INCHES): 7.875 LONG X 5.875 WIDE X 5.875 HIGH MAXIMUM (INCHES): 19.625 LONG X 13.75 WIDE X 20.75 HIGH BOTTOM TAPE HEAD MAGAZINE CAPACITY: 200 CASES AIR SUPPLY: 6 BAR (80 PSI) ELECTRICAL: 230 VOLTS, 60 HETZ, 3 PHASE LANTECH · C-300	🔒 Subscribe
			SERVO DRIVEN FILM SPLICING SYSTEM WITH PERSONNEL GUARDING - USED SPLICER WITH: ACOPOS SERVO DRIVES LAST PRODUCT RAN: POPCORN AUTOMATION PC CONTROLS FILM WIDTH: 22 INCHES	🔒 Subscribe
			USED 83" BY 4.5" PLASTIC MAT-TOP CONVEYOR WITH: CONVEYOR DIMENSIONS: LENGTH: 83 INCHES WIDTH: 4.5 INCHES ADJUSTABLE LEGS ELECTRICAL REQUIREMENTS: 130 VOLTS, 60 HERTZ, 1 PHASE OVERALL DIMENSIONS: LENGTH: 92 INCHES WIDTH: 18 INCHES HEIGHT: 39 INCHES	🔒 Subscribe
	SHANKLIN	T-62	SHANKLIN T-62 HEAT SHRINK TUNNEL: VARIABLE BELT SPEED: MINIMUM: 25 FEET PER MINUTE MAXIMUM: UP TO 150 FEET PER MINUTE TUNNEL APERTURE: 18 INCHES WIDE 10.5 INCHES HIGH TUNNEL LENGTH: 61 INCHES CONVEYOR DIMENSIONS: 15 INCHES WIDE 108 INCHES LONG ANALOG TEMPERATURE CONTROLS TEMPERATURE RANGE: 50 UP TO 500 DEGREES FAHRENHEIT DUAL CHAMBER HEAT TUNNEL BLOW MOTOR: .75 HORSEPOWER ELECTRICAL: 460 VOLTS, 3 PHASE, 60 HERTZ, 7.8 AMPS SHANKLIN · T-62	🔒 Subscribe
	JUMO	IMAGO F3000	JUMO IMAGO F3000 CONTROL BOX - JUMO ELECTRICAL CONTROL BOX JUMO · IMAGO F3000	🔒 Subscribe
	LABELING SYSTEMS	301	LABELING SYSTEMS 301 PRESSURE SENSITIVE LABELER WITH: ROLL WIDTH: 3 INCHES STAINLESS STEEL CONSTRUCTION ELECTRICAL REQUIREMENTS: 120 VOLTS, 60 HERTZ, 1 PHASE, 10 AMPS LABELING SYSTEMS · 301	🔒 Subscribe
	HONEYWELL	MOUTROL	(2) CONTROL CABINETS (3) HONEYWELL MOUTROL MOTORS BOX OF MISCELLANEOUS ELECTRICAL COMPONENTS HONEYWELL · MOUTROL	🔒 Subscribe
			STAINLESS STEEL CONSTRUCTION. ON CASTERS. OVERALL DIMENSIONS PER TABLE: LENGTH: 42.5 INCHES WIDTH: 20 INCHES HEIGHT: 34 INCHES	🔒 Subscribe
			DIGITAL SS TABLE TOP SCALE - SS TABLE TOP SCALE: DIGITAL	🔒 Subscribe
			DUAL CHAMBER VACUUM BAG SEALER - USED VACUUM BAG SEALER WITH: SEAL DIMENSIONS: LENGTH: 34 INCHES WIDTH: 34 INCHES MISSING VACUUM PUMP	🔒 Subscribe
	JUMO	IMAGO F3000	JUMO IMAGO F3000 CONTROL BOX - USED JUMO ELECTRICAL CONTROL CABINET JUMO · IMAGO F3000	🔒 Subscribe
	TRIEF	PUMA 700F	TRIEF PUMA 700F SLICER - RUNS UP TO 400 SLICES PER MINUTE (WITH A DOUBLE KNIFE) LOADING CHAMBER DIMENSIONS: LENGTH: 41 INCHES DEPTH: 7.5 INCHES WIDTH: 8.75 INCHES DISCHARGE CHAMBER DIMENSIONS: LENGTH: 31 INCHES DEPTH: 14.25 INCHES WIDTH: 10.5 INCHES DISCHARGE CONVEYOR DIMENSIONS: LENGTH: 56 INCHES WIDTH: 9.75 INCHES POWER: OPERATING VOLTAGE: 220 V CONTROL VOLTAGE: 110 V RATED CURRENT: 10.6 A SUPPLY LINE FUSE: 16 A RATED POWER: 3.4/4.62 KW/HP CUTS FRESH, CHILLED, OR FROZEN DOWN TO -4C/24.8F BLADE INCLUDED CASTER WHEELS IDEAL FOR CUTTING BONE-IN OR BONELESS PORK LOINS, BONELESS STEAKS, CUTLETS, PORK BELLIES, AND POULTRY TRIEF · PUMA 700F	🔒 Subscribe
	REJVES	FOUR STATION SNAP CAPPER	REJVES FOUR STATION SNAP CAPPER WITH: SNAP CAP: 1.5 INCHES INFEED/DISCHARGE: 37 INCHES CONVEYOR WIDTH: 3.25 INCH PRODUCTION SPEED: UP TO 45 BOTTLES PER MINUTE DEPEDING ON PRODUCT LENGTH: 27 INCHES APERTURE: 3 INCHES LANING REJECT ELECTRICAL: 480 VOLTS, 3 PHASE, 60 HERTZ, 20 AMPS ELAVATING CONVEYOR: HOPPER DIMENSIONS: LENGTH: 18.25 INCHES WIDTH: 31.25 INCHES DEPTH: 29 INCHES 20 GALLONS LIFT DIMESNIONS: FLIGHT: 6.5 INCHES WIDTH: 7.75 INCHES CLEAT HEIGHT: 1.5 INCHES DISCHARGE: 64.5 INCHES FROM GROUND INFEED: 39.5 INCHES FROM GROUND DELSA CAP UNSCRAMBLER: 45 INCH INFEED INFEED DIMENSIONS: DIAMETER: 21 INCHES FLIGHTS: 2 INCHES DEPTH: 6.5 INCHES DISCHARGE: 45 INCHES WIDTH OF FEED: 1.5 INCHES (ADJUSTABLE) ELECTRICAL: 480 VOLTS, 60 HZ, PHASE 3 REJVES · FOUR STATION SNAP CAPPER	🔒 Subscribe
	KAWASAKI ROBOTICS	RS005N	KAWASAKI ROBOTICS RS005N SNAP CAPPER WITH: CONVEYOR: LENGTH: 10 FEET WIDTH: 5.5 INCHES INFEED: 35 INCHES DISCHARGE: 35.5 INCH CAP SIZE: 1.5 INCHES MAGAZINE SIZE: 3 FEET KAWASAKI ROBOTICS · RS005N	🔒 Subscribe
			1000 GALLON STAINLESS STEEL TANK WITH: CAPACITY: 1000 GALLONS MANWAY DIAMETER: 22 INCHES DISCHARGE DIAMETER: 2 INCHES IMPELLER AGITATION MOUNTED ON (4) LEGS STAINLESS STEEL CONSTRUCTION	🔒 Subscribe
			1000 GALLON STAINLESS STEEL TANK WITH: CAPACITY: 1000 GALLONS MANWAY DIAMETER: 22 INCHES DISCHARGE DIAMETER: 2 INCHES IMPELLER AGITATION MOUNTED ON (4) LEGS STAINLESS STEEL CONSTRUCTION	🔒 Subscribe
			139" BY 12" SMOOTH TOP BELT CONVEYOR WITH: INFEED HEIGHT: 37 INCHES CONVEYOR DIMENSIONS: LENGTH: 139 INCHES WIDTH: 12 INCHES VARIABLE FREQUENCY DRIVE 1/4 HORSEPOWER MOTOR ELECTRIC REQUIREMENTS: 90 VOLTS, 2.3 AMPS, 1 PHASE OVERALL DIMENSIONS: LENGTH: 144 INCHES WIDTH: 33 INCHES HEIGHT: 38 INCHES	🔒 Subscribe
			USED 48" ROTARY ACCUMULATION TABLE WITH: DIAMETER: 48 INCHES INFEED HEIGHT: 44 INCHES STAINLESS STEEL TABLE TOP VARIABLE FREQUENCY DRIVE GUIDE RAIL ADJUSTABLE FEET	🔒 Subscribe
	WELDOTRON	22" W X 14" H	WELDOTRON 22" W X 14" H HEAT SHRINK TUNNEL WITH: APERTURE DIMENSIONS: WIDTH: 22 INCHES HEIGHT: 14 INCHES INFEED HEIGHT: 34 INCHES TUNNEL LENGTH: 54 INCHES TEMPERATURE RANGE: 100-700F ON CASTERS OVERALL DIMENSIONS (INCHES): 71 LONG X 37 WIDE X 72 HIGH WELDOTRON · 22" W X 14" H	🔒 Subscribe
	SHANKLIN	T-6XL	SHANKLIN T-6XL HEAT SHRINK TUNNEL 18" WIDE X 12" HIGH - USED SHANKLIN HEAT SHRINK TUNNEL WITH: APERTURE DIMENSIONS: WIDTH: 18 INCHES HEIGHT: 12 INCHES CONVEYOR WIDTH: 11 INCHES TUNNEL LENGTH: 32 INCHES WIRE MESH CONVEYOR ELECTRICAL REQUIREMENTS: 230 VOLTS, 60 HERTZ, 1 PHASE OVERALL DIMENSIONS (INCHES): 60 LONG X 39 WIDE X 73 HIGH SHANKLIN · T-6XL	🔒 Subscribe
			USED 36" ROTARY ACCUMULATION TABLE WITH: DIAMETER: 36 INCHES INFEED HEIGHT: 42 INCHES STAINLESS STEEL TABLE TOP VARIABLE FREQUENCY DRIVE PRODUCT GUIDE RAILS ON CASTERS	🔒 Subscribe
			USED 36" ROTARY ACCUMULATION TABLE WITH: DIAMETER: 36 INCHES STAINLESS STEEL CONSTRUCTION ON CASTERS FIXED SPEED ELECTRICAL REQUIREMENTS: 115 VOLTS, 60 HERTZ, 1 PHASE OVERALL DIMENSIONS: WIDTH: 39.5 INCHES HEIGHT: 40 INCHES	🔒 Subscribe
	HEAT SEAL	1730LB-1	HEAT SEAL 1730LB-1 MANUAL L BAR SEALER WITH: SEALING DIMENSIONS: WIDTH: 18 INCHES LENGTH: 30 INCHES OPENING HEIGHT: 10 INCHES MAXIMUM WEB WIDTH: 18 INCHES PERFORATOR ATTACHMENT CONVEYOR DIMENSIONS: LENGTH: 33 INCHES WIDTH: 13 INCHES ELECTRICAL REQUIREMENTS: 115 VOLTS, 60 HETZ, 20 AMPS OVERALL DIMENSIONS: LENGTH: 62 INCHES WIDTH: 24 INCHES HEIGHT: 40 INCHES HEAT SEAL · 1730LB-1	🔒 Subscribe
		HEAT SEAL 8.5" TALL APERTURE HEAT SHRINK TUNNEL	HEAT SEAL 8.5" TALL APERTURE HEAT SHRINK TUNNEL WITH: APERTURE DIMENSIONS: LENGTH: 18 INCHES HEIGHT: 8.5 INCHES TUNNEL LENGTH: 32 INCHES CONVEYOR WIDTH: 16 INCHES STAINLESS STEEL CONSTRUCTION ON CASTERS ELECTRICAL REQUIREMENTS: 220 VOLTS, 50/60 HERTZ, 40 AMPS OVERALL DIMENSIONS: LENGTH: 5 FEET WIDTH: 26 INCHES HEIGHT: 58 INCHES HEAT SEAL 8.5" TALL APERTURE HEAT SHRINK TUNNEL	🔒 Subscribe
	SCALE SYSTEMS	GSE 3501	FLOOR SCALE WITH: SCALE DIMENSIONS: LENGTH: 30 INCHES WIDTH: 25 INCHES ELECTRICAL REQUIREMENTS: 250 VOLTS, 50/60 HERTZ, 3 PHASE OVERALL DIMENSIONS: LENGTH: 43 INCHES WIDTH: 41 INCHES HEIGHT: 4 FEET SCALE SYSTEMS · GSE 3501	🔒 Subscribe
	CVC	300 II	CVC 300 II WRAPAROUND PRESSURE SENSITIVE LABELER WITH: MAXIMUM LABEL DIMENSIONS: LENGTH: 12 INCHES WIDTH: 9 INCHES MINIMUM LABEL DIMENSIONS: LENGTH: 5/8 INCH WIDTH: 3/8 INCH CAPACITY: UP TO 170 BOTTLES PER MINUTE CONVEYOR DIMENSIONS: LENGTH: 71 INCHES WIDTH: 4 INCHES STAINLESS STEEL CONSTRUCTION ELECTRICAL REQUIREMENTS: 110 VOLTS, 50/60 HERTZ, 3 PHASE APPROXIMATE OVERALL DIMENSIONS (INCHES): 85 LONG X 43 WIDE X 64 HIGH CVC · 300 II	🔒 Subscribe
	C.E. KING	SC4	C.E. KING SC4 TABLET COUNTER WITH: SPEED: UP TO 100 CONTAINERS PER MINUTE CHANGE PARTS NEEDED ON CASTERS ELECTRICAL REQUIREMENTS: 220 VOLTS, 60 HERTZ, 1 PHASE OVERALL DIMENSIONS: LENGTH: 44 INCHES WIDTH: 20 INCHES HEIGHT: 62 INCHES C.E. KING · SC4	🔒 Subscribe
	MARBURG IND		MARBURG IND HEAT SHRINK TUNNEL WITH CONVEYOR WITH: APERTURE DIMENSIONS: WIDTH: 4 INCHES HEIGHT: 4 INCHES WORKING APERTURE DIMENSIONS: WIDTH: 2.5 INCHES HEIGHT: 4 INCHES TUNNEL LENGTH: 22 INCHES CONVEYOR DIMENSIONS: LENGTH: 31 INCHES WIDTH: 10 INCHES VARIABLE HEAT TEMPERATURE OVERALL DIMENSIONS: LENGTH: 32 INCHES WIDTH: 22 INCHES HEIGHT: 54 INCHES MARBURG IND	🔒 Subscribe
	SWIFTPACK		SWIFTPACK PILL COUNTER WITH: BATCH AMOUNT: 2 TO 9,999 DESIGNED TO FEED AND COUNT ANY SIZE, SHAPE OR QUANTITY OF TABLETS ELECTRICAL REQUIREMENTS: 120 VOLTS, 60 HERTZ, 1 PHASE SWIFTPACK	🔒 Subscribe
2016	BOSSAR	B-3700	2016 BOSSAR B-3700 HORIZONTAL POUCH FFS AND ZIPPER WITH: PRODUCTION OUTPUT RATE: 60-90 BAGS PER MINUTE DUAL FILLING, SEALING, AND DISCHARGE 2 FILL STATIONS 4 SIDED BAG SEAL MINIMUM POUCH SIZE 160X215 MILLIMETERS MAXIMUM POUCH SIZE 185X310 MILLIMETERS ZIPPER APPLICATOR NITROGEN DOSER POUCH STYLE: PILLOW OR GUSSET POUCH DIMENSIONS: WIDTH: 5-7.5 INCHES HEIGHT: 5-15 INCHES CURRENT POUCH DIMENSIONS: WIDTH: 6 INCHES HEIGHT: 9.5 INCHES MAXIMUM FILLING WEIGHT: 9.5 OUNCES REBUILD IN 2016 POWER SUPPLY: 480 / 3 PHASE / 60 HERTZ LAST RUNNING POUCHES OF SHREDDED CHEESE ELECTRICAL INFORMATION 480 VOLTAGE 3 PHASE 60 HERTZ 2016 · BOSSAR · B-3700	🔒 Subscribe
			USED 142.5" L BY 33" W BLUE BELT INCLINE CONVEYOR WITH: INFEED: 15 INCHES BELT WIDTH: 33 INCHES LANING RAILS: 26 INCHES DOWN TO 23 INCHES WIDE DISCHARGE: 6 FOOT INFEED SLANT OF CONVEYOR: 124 INCHES DISCHARGE STRAIGHT OF CONVEYOR: 18.5 INCHES (APPROXIMATELY) GEARED MOTOR	🔒 Subscribe
			USED 129" L BY 14" W CLEATED INCLINE CONVEYOR WITH: Z-STYLE DESIGN INFEED: FROM GROUND: 18 INCHES LENGTH: 36 INCHES DISCHARGE: LENGTH: 20 INCHES (APPROXIMATELY) FROM GROUND: 87 INCHES SLANT IN CONVEYOR: 73 INCHES LONG CLEAT DIMENSIONS: WIDTH: 11 INCHES HEIGHT: 2 INCHES FLIGHT: 8 INCHES	🔒 Subscribe
	HINDS-BOCK	4P-08NT	HINDS-BOCK 4P-08NT TABLE TOP 4 PISTON MUFFIN DEPOSITOR - USED HINDS-BOCK 4P-08NT TABLE TOP 4 PISTON MUFFIN DEPOSITOR WITH: PAN SIZES UP TO 26.5 INCHES WIDE UP TO 1200 DOZEN MUFFINS PER HOUR DEPENDING ON PRODUCT ADJUSTABLE DEPOSIT WEIGHTS WITH CHANGE PARTS: MINIMUM: 1 OUNCE MAXIMUM: 9 OUNCES VARIABLE CYCLE SPEED PISTON HEADS: 4 APPROXIMATELY 28 GALLON HOPPER AIR REQUIREMENTS: 80 PSI, 8 CFMS. USED HINDS-BOCK 5P-08WT TABLE TOP 5 PISTON MUFFIN DEPOSITER WITH: PAN SIZES UP TO 26.5 INCHES WIDE UP TO 1200 DOZEN MUFFINS PER HOUR DEPENDING ON PRODUCT ADJUSTABLE DEPOSIT WEIGHTS WITH CHANGE PARTS: MINIMUM: 1 OUNCE MAXIMUM: 9 OUNCES VARIABLE CYCLE SPEED PISTON HEADS: 5 APPROXIMATELY 28 GALLON HOPPER AIR REQUIREMENTS: 80 PSI, 8 CFMS HINDS-BOCK · 4P-08NT	🔒 Subscribe
			PNEUMATIC LIQUID PRESS WITH JACKETED HOPPER: HOPPER CAPACITY: 3 GALLONS; JACKETED HOPPER MAWP: 50 PSI @ 300F; MDMT: -20F @ 50 PSI; STAINLESS STEEL CONSTRUCTION; OVERALL DIMENSIONS: LENGTH: 28 INCHES; WIDTH: 28 INCHES; HEIGHT: 73 INCHES	🔒 Subscribe
	PREFERRED PACKAGING	PP2028HK	PREFERRED PACKAGING PP2028HK MANUAL L-BAR SEALER - USED PREFERRED PACKAGING L-BAR SEALER WITH: SEAL AREA DIMENSIONS: LENGTH: 20 INCHES WIDTH: 28 INCHES MAXIMUM FILM ROLL WIDTH: 25 INCHES EXIT CONVEYOR WIDTH: 17 INCHES DISCHARGE HEIGHT: 34 INCHES ON CASTERS ELECTRICAL: 220 VOLTS, 60 HZ, PHASE 1, 15 AMPS PREFERRED PACKAGING · PP2028HK	🔒 Subscribe
	CDA	E-FILL	CDA E-FILL FILLER, CAPPER, AND LABELING SYSTEM WITH: E-CIGARETTE VIAL FILLING MACHINE. STAINLESS STEEL CONSTRUCTION. CONVEYOR DIMENSIONS: LENGTH: 10 FEET, WIDTH: 3.25 INCHES, FROM GROUND: 38 INCHES. OUTPUT: 25 PRODUCTS PER MINUTE WHILE APPLYING 2 LABELS. PRODUCT RANGE: 5 MILLILITERS TO 1 LITER WITH A MAX DIAMETER OF 90 MILLIMETERS. MEMORIZATION OF UP TO 50 DIFFERENT PRODUCT DRESSINGS. LABEL WINDUP DIAMETER: 1 FOOT (APPROXIMATELY). LABELING PLATE: LENGTH: 6.75 INCHES, WIDTH: 6.5 INCHES. ELECTRICAL: 208-250 VOLTS, 1 PHASE, 60 HERTZ, 16 AMPS. MISSING FILLER NOT SAFE FOR FOOD CDA · E-FILL	🔒 Subscribe
			PLASTIC MAT TOP INCLINED CONVEYOR 92" DISCHARGE - USED INCLINED CONVEYOR WITH: INFEED HEIGHT: 30 INCHES PLASTIC MAT TOP BELT: WIDTH: 24 INCHES DISCHARGE HEIGHT: 92 INCHES OVERALL HEIGHT: 95 INCHES ELECTRIC MOTOR AND GEAR REDUCER: NOT WASH-DOWN CAPABLE PRODUCT GUIDE RAILS AND BOTTOM RAIL STAINLESS STEEL FRAME AND RAIL CONSTRUCTION MOUNTED ON LOCKING SWIVEL CASTERS	🔒 Subscribe
	LOVESHAW	SP304	LOVESHAW SP304 2 INCH TOP & BOTTOM CASE TAPER - USED LOVESHAW CASE TAPER WITH: TOP & BOTTOM TAPEHEADS: 2 INCH SIDE DRIVE BELTS: HEIGHT: 2 INCHES SPEED: 72 FEET PER MINUTE FLAP FOLDERS CASE CAPACITY: LENGTH: 6 TO 24 INCHES WIDTH: 4.5 TO 20 INCHES HEIGHT: 4.5 TO 24 INCHES ELECTRICAL REQUIREMENTS: VOLTAGE: 110V PHASE: 1 FREQUENCY: 60 HZ CURRENT: 7.6 AMPS MANUALLY ADJUSTABLE HEIGHT AND WIDTH PUSHBUTTON START AND STOP CONTROLS MOUNTED ON ADJUSTABLE HEIGHT LEGS WITH LOCKING SWIVEL CASTERS LOVESHAW · SP304	🔒 Subscribe
	HINDS-BOCK	5P-08WT	HINDS-BOCK 5P-08WT TABLE TOP 5 PISTON MUFFIN DEPOSITOR WITH: PAN SIZES UP TO 26.5 INCHES WIDE UP TO 1200 DOZEN MUFFINS PER HOUR DEPENDING ON PRODUCT ADJUSTABLE DEPOSIT WEIGHTS VARIABLE CYCLE SPEED 5 PISTON HEADS 39 GALLON HOPPER HOPPER WIDTH: 44.25 INCHES YAMATO DP-6200 DIGITAL SCALE AIR REQUIREMENTS: 80 PSI, 8 CFMS HINDS-BOCK · 5P-08WT	🔒 Subscribe
	HIBAR		HIBAR SERVO DISPENSING SYSTEM WITH: STAINLESS STEEL CONSTRUCTION 3.2 HORSEPOWER DIGITAL CONTROL PANEL EMERGENCY STOP ELECTRICAL REQUIREMENTS: 100/240 VOLTS, 50/60 HERTZ, 1 PHASE OVERALL DIMENSIONS: LENGTH: 34 INCHES WIDTH: 19 INCHES HEIGHT: 28 INCHES HIBAR	🔒 Subscribe
	LANTECH	SW-3000	LANTECH SW-3000 AUTOMATIC SIDE SEAL SHRINK WRAPPER: SPEED: UP TO 75 PACKAGES PER MINUTE MAXIMUM PRODUCT DIMENSIONS: LENGTH: 40 INCHES WIDTH: 15 INCHES HEIGHT: 8 INCHES MINIMUM PRODUCT DIMENSIONS: LENGTH: 3 INCHES WIDTH: 1.5 INCHES HEIGHT: 1/8 INCH FILM ROLL SIZE: MINIMUM: 6 INCHES MAXIMUM: 24 INCHES CONVEYOR DIMENSIONS: WIDTH: 15 INCHES HEIGHT: 36 INCHES SEAL BAR WIDTH: 18 INCHES PRODUCT DETECTION SEALING MECHANISM: HOT KNIFE CONTINUOUS MOTION AIR REQUIREMENTS: 8-12 CUBIC FEET PER MINUTE AT 85 PSI ELECTRICAL REQUIREMENTS: 230 VOLTS, 60 HERTZ, 1 PHASE APPROXIMATE OVERALL DIMENSIONS: LENGTH: 153 INCHES WIDTH: 40 INCHES HEIGHT: 66 INCHES LANTECH · SW-3000	🔒 Subscribe
	LOVESHAW	SP304	LOVESHAW SP304 2 INCH TOP & BOTTOM CASE TAPER - USED LOVESHAW CASE TAPER WITH: TOP & BOTTOM TAPEHEADS: 2 INCH SIDE DRIVE BELTS: HEIGHT: 2 INCHES SPEED: 72 FEET PER MINUTE FLAP FOLDERS CASE CAPACITY: LENGTH: 6 TO 24 INCHES WIDTH: 4.5 TO 20 INCHES HEIGHT: 4.5 TO 24 INCHES ELECTRICAL REQUIREMENTS: VOLTAGE: 110V PHASE: 1 FREQUENCY: 60 HZ CURRENT: 8.4 AMPS MANUALLY ADJUSTABLE HEIGHT AND WIDTH PUSHBUTTON START AND STOP CONTROLS MOUNTED ON ADJUSTABLE HEIGHT LEGS WITH LOCKING SWIVEL CASTERS LOVESHAW · SP304	🔒 Subscribe
	WEILER	SS AGITATED AUGER FEEDER	WEILER SS AGITATED AUGER FEEDER WITH: STAINLESS STEEL CONSTRUCTION BLENDER DIMENSIONS: WIDTH: 71.5 INCHES LENGTH: 60 INCHES HEIGHT: 70 INCHES DISCHARGE DIMENSIONS: WIDTH: 24 INCHES LENGTH: 22 INCHES WEILER · SS AGITATED AUGER FEEDER	🔒 Subscribe
			40" ROTARY ACCUMULATION TABLE WITH: DIAMETER: 40 INCHES VARIABLE FREQUENCY DRIVE STAINLESS STEEL CONSTRUCTION ON CASTERS 1/8 HORSEPOWER MOTOR ELECTRICAL REQUIREMENTS: 115/230 VOLTS, 50/60 HERTZ OVERALL DIMENSIONS: LENGTH: 45 INCHES HEIGHT: 39 INCHES	🔒 Subscribe
	ACCUTEK		ACCUTEK PISTON FILLER: TABLE TOP DESIGN DIRECT FEED STYLE SECO GUAGES ACCUTEK	🔒 Subscribe

Year	Make	Model	Description	Price
	WEILER	MH30	WEILER MH30 STAINLESS STEEL INCLINE AUGER CONVEYOR 16" DIAMETER - USED WEILER AUGER CONVEYOR WITH: INCLINED AUGER SPECS: DIAMETER: 16 INCHES CENTERS: 15 INCHES SHAFT: 6 INCHES HOPPER INFEED HEIGHT: 57 INCHES DISCHARGE HEIGHT: 87 INCHES VOLTAGE REQUIREMENT: 460V STAINLESS STEEL CONSTRUCTION	🔒 Subscribe
	WEILER	MH30	WEILER MH30 STAINLESS STEEL INCLINE AUGER CONVEYOR - USED WEILER AUGER CONVEYOR WITH: INCLINED INFEED HOPPER: AUGER AGITATED: DIAMETER: 16 INCHES CENTERS: 15 INCHES SHAFT: 6 INCHES LENGTH: 56 INCHES WIDTH: 80 INCHES INFEED HEIGHT: 57 INCHES DISCHARGE HEIGHT: 90 INCHES VOLTAGE REQUIREMENT: 460V STAINLESS STEEL CONSTRUCTION	🔒 Subscribe
	HOBART	4356	HOBART 4356 MIXER GRINDER WITH: PRODUCTION RATE: UP TO 160 POUNDS PER MINUTE CAPACITY: 500 POUNDS OVERALL DIMENSIONS: LENGTH: APPROXIMATELY 72 INCHES WIDTH: APPROXIMATELY 41 INCHES HEIGHT: APPROXIMATELY 96 INCHES STAINLESS STEEL CONSTRUCTION 0.5 HORSEPOWER MOTOR ELECTRICAL: 208-230/460 VOLTS, 60 HZ, PHASE 3	🔒 Subscribe
	RITE HITE	LITESPEED	RITE HITE LITESPEED HIGH PERFORMANCE ROLL UP DOOR WITH: LIFTING SPEED: UP TO 65 INCHES PER SECOND OVERALL DIMENSIONS WIDTH: 120 INCHES HEIGHT: 120 INCHES ELECTRICAL: 460 VOLTS, 60 HZ, PHASE 3	🔒 Subscribe
	LANTECH	C-300	LANTECH C-300 CASE ERECTOR WITH: OUTPUT: UP TO 10 CASES PER MINUTE CASE SIZE RANGE: MINIMUM (INCHES): 7.875 LONG X 5.875 WIDE X 5.875 HIGH MAXIMUM (INCHES): 19.625 LONG X 13.75 WIDE X 20.75 HIGH LEFT HANDED CASES BOTTOM TAPE HEAD MAGAZINE CAPACITY: 200 CASES AIR SUPPLY: 6 BAR (80 PSI) ELECTRICAL REQUIREMENTS: 230 VOLTS, 3 PH, 60 HZ	🔒 Subscribe
	LANTECH	C-300	LANTECH C-300 CASE ERECTOR WITH: CASE SIZE RANGE: MINIMUM (INCHES): 7.875 LONG X 5.875 WIDE X 5.875 HIGH MAXIMUM (INCHES): 19.625 LONG X 13.75 WIDE X 20.75 HIGH BOTTOM TAPE HEAD MAGAZINE CAPACITY: 200 CASES AIR SUPPLY: 6 BAR (80 PSI) ELECTRICAL: 230 VOLTS, 60 HETZ, 3 PHASE	🔒 Subscribe
			SERVO DRIVEN FILM SPLICING SYSTEM WITH PERSONNEL GUARDING - USED SPLICER WITH: ACOPOS SERVO DRIVES LAST PRODUCT RAN: POPCORN AUTOMATION PC CONTROLS FILM WIDTH: 22 INCHES	🔒 Subscribe
			USED 83" BY 4.5" PLASTIC MAT-TOP CONVEYOR WITH: CONVEYOR DIMENSIONS: LENGTH: 83 INCHES WIDTH: 4.5 INCHES ADJUSTABLE LEGS ELECTRICAL REQUIREMENTS: 130 VOLTS, 60 HERTZ, 1 PHASE OVERALL DIMENSIONS: LENGTH: 92 INCHES WIDTH: 18 INCHES HEIGHT: 39 INCHES	🔒 Subscribe
	SHANKLIN	T-62	SHANKLIN T-62 HEAT SHRINK TUNNEL: VARIABLE BELT SPEED: MINIMUM: 25 FEET PER MINUTE MAXIMUM: UP TO 150 FEET PER MINUTE TUNNEL APERTURE: 18 INCHES WIDE 10.5 INCHES HIGH TUNNEL LENGTH: 61 INCHES CONVEYOR DIMENSIONS: 15 INCHES WIDE 108 INCHES LONG ANALOG TEMPERATURE CONTROLS TEMPERATURE RANGE: 50 UP TO 500 DEGREES FAHRENHEIT DUAL CHAMBER HEAT TUNNEL BLOW MOTOR: .75 HORSEPOWER ELECTRICAL: 460 VOLTS, 3 PHASE, 60 HERTZ, 7.8 AMPS	🔒 Subscribe
	JUMO	IMAGO F3000	JUMO IMAGO F3000 CONTROL BOX - JUMO ELECTRICAL CONTROL BOX	🔒 Subscribe
	LABELING SYSTEMS	301	LABELING SYSTEMS 301 PRESSURE SENSITIVE LABELER WITH: ROLL WIDTH: 3 INCHES STAINLESS STEEL CONSTRUCTION ELECTRICAL REQUIREMENTS: 120 VOLTS, 60 HERTZ, 1 PHASE, 10 AMPS	🔒 Subscribe
	HONEYWELL	MOUTROL	(2) CONTROL CABINETS (3) HONEYWELL MOUTROL MOTORS BOX OF MISCELLANEOUS ELECTRICAL COMPONENTS	🔒 Subscribe
			STAINLESS STEEL CONSTRUCTION. ON CASTERS. OVERALL DIMENSIONS PER TABLE: LENGTH: 42.5 INCHES WIDTH: 20 INCHES HEIGHT: 34 INCHES	🔒 Subscribe
			DIGITAL SS TABLE TOP SCALE - SS TABLE TOP SCALE: DIGITAL	🔒 Subscribe
			DUAL CHAMBER VACUUM BAG SEALER - USED VACUUM BAG SEALER WITH: SEAL DIMENSIONS: LENGTH: 34 INCHES WIDTH: 34 INCHES MISSING VACUUM PUMP	🔒 Subscribe
	JUMO	IMAGO F3000	JUMO IMAGO F3000 CONTROL BOX - USED JUMO ELECTRICAL CONTROL CABINET	🔒 Subscribe
	TRIEF	PUMA 700F	TRIEF PUMA 700F SLICER - RUNS UP TO 400 SLICES PER MINUTE (WITH A DOUBLE KNIFE) LOADING CHAMBER DIMENSIONS: LENGTH: 41 INCHES DEPTH: 7.5 INCHES WIDTH: 8.75 INCHES DISCHARGE CHAMBER DIMENSIONS: LENGTH: 31 INCHES DEPTH: 14.25 INCHES WIDTH: 10.5 INCHES DISCHARGE CONVEYOR DIMENSIONS: LENGTH: 56 INCHES WIDTH: 9.75 INCHES POWER: OPERATING VOLTAGE: 220 V CONTROL VOLTAGE: 110 V RATED CURRENT: 10.6 A SUPPLY LINE FUSE: 16 A RATED POWER: 3.4/4.62 KW/HP CUTS FRESH, CHILLED, OR FROZEN DOWN TO -4C/24.8F BLADE INCLUDED CASTER WHEELS IDEAL FOR CUTTING BONE-IN OR BONELESS PORK LOINS, BONELESS STEAKS, CUTLETS, PORK BELLIES, AND POULTRY	🔒 Subscribe
	REJVES	FOUR STATION SNAP CAPPER	REJVES FOUR STATION SNAP CAPPER WITH: SNAP CAP: 1.5 INCHES INFEED/DISCHARGE: 37 INCHES CONVEYOR WIDTH: 3.25 INCH PRODUCTION SPEED: UP TO 45 BOTTLES PER MINUTE DEPEDING ON PRODUCT LENGTH: 27 INCHES APERTURE: 3 INCHES LANING REJECT ELECTRICAL: 480 VOLTS, 3 PHASE, 60 HERTZ, 20 AMPS ELAVATING CONVEYOR: HOPPER DIMENSIONS: LENGTH: 18.25 INCHES WIDTH: 31.25 INCHES DEPTH: 29 INCHES 20 GALLONS LIFT DIMESNIONS: FLIGHT: 6.5 INCHES WIDTH: 7.75 INCHES CLEAT HEIGHT: 1.5 INCHES DISCHARGE: 64.5 INCHES FROM GROUND INFEED: 39.5 INCHES FROM GROUND DELSA CAP UNSCRAMBLER: 45 INCH INFEED INFEED DIMENSIONS: DIAMETER: 21 INCHES FLIGHTS: 2 INCHES DEPTH: 6.5 INCHES DISCHARGE: 45 INCHES WIDTH OF FEED: 1.5 INCHES (ADJUSTABLE) ELECTRICAL: 480 VOLTS, 60 HZ, PHASE 3	🔒 Subscribe
	KAWASAKI ROBOTICS	RS005N	KAWASAKI ROBOTICS RS005N SNAP CAPPER WITH: CONVEYOR: LENGTH: 10 FEET WIDTH: 5.5 INCHES INFEED: 35 INCHES DISCHARGE: 35.5 INCH CAP SIZE: 1.5 INCHES MAGAZINE SIZE: 3 FEET	🔒 Subscribe
			1000 GALLON STAINLESS STEEL TANK WITH: CAPACITY: 1000 GALLONS MANWAY DIAMETER: 22 INCHES DISCHARGE DIAMETER: 2 INCHES IMPELLER AGITATION MOUNTED ON (4) LEGS STAINLESS STEEL CONSTRUCTION	🔒 Subscribe
			1000 GALLON STAINLESS STEEL TANK WITH: CAPACITY: 1000 GALLONS MANWAY DIAMETER: 22 INCHES DISCHARGE DIAMETER: 2 INCHES IMPELLER AGITATION MOUNTED ON (4) LEGS STAINLESS STEEL CONSTRUCTION	🔒 Subscribe
			139" BY 12" SMOOTH TOP BELT CONVEYOR WITH: INFEED HEIGHT: 37 INCHES CONVEYOR DIMENSIONS: LENGTH: 139 INCHES WIDTH: 12 INCHES VARIABLE FREQUENCY DRIVE 1/4 HORSEPOWER MOTOR ELECTRIC REQUIREMENTS: 90 VOLTS, 2.3 AMPS, 1 PHASE OVERALL DIMENSIONS: LENGTH: 144 INCHES WIDTH: 33 INCHES HEIGHT: 38 INCHES	🔒 Subscribe
			USED 48" ROTARY ACCUMULATION TABLE WITH: DIAMETER: 48 INCHES INFEED HEIGHT: 44 INCHES STAINLESS STEEL TABLE TOP VARIABLE FREQUENCY DRIVE GUIDE RAIL ADJUSTABLE FEET	🔒 Subscribe
	WELDOTRON	22" W X 14" H	WELDOTRON 22" W X 14" H HEAT SHRINK TUNNEL WITH: APERTURE DIMENSIONS: WIDTH: 22 INCHES HEIGHT: 14 INCHES INFEED HEIGHT: 34 INCHES TUNNEL LENGTH: 54 INCHES TEMPERATURE RANGE: 100-700F ON CASTERS OVERALL DIMENSIONS (INCHES): 71 LONG X 37 WIDE X 72 HIGH	🔒 Subscribe
	SHANKLIN	T-6XL	SHANKLIN T-6XL HEAT SHRINK TUNNEL 18" WIDE X 12" HIGH - USED SHANKLIN HEAT SHRINK TUNNEL WITH: APERTURE DIMENSIONS: WIDTH: 18 INCHES HEIGHT: 12 INCHES CONVEYOR WIDTH: 11 INCHES TUNNEL LENGTH: 32 INCHES WIRE MESH CONVEYOR ELECTRICAL REQUIREMENTS: 230 VOLTS, 60 HERTZ, 1 PHASE OVERALL DIMENSIONS (INCHES): 60 LONG X 39 WIDE X 73 HIGH	🔒 Subscribe
			USED 36" ROTARY ACCUMULATION TABLE WITH: DIAMETER: 36 INCHES INFEED HEIGHT: 42 INCHES STAINLESS STEEL TABLE TOP VARIABLE FREQUENCY DRIVE PRODUCT GUIDE RAILS ON CASTERS	🔒 Subscribe
			USED 36" ROTARY ACCUMULATION TABLE WITH: DIAMETER: 36 INCHES STAINLESS STEEL CONSTRUCTION ON CASTERS FIXED SPEED ELECTRICAL REQUIREMENTS: 115 VOLTS, 60 HERTZ, 1 PHASE OVERALL DIMENSIONS: WIDTH: 39.5 INCHES HEIGHT: 40 INCHES	🔒 Subscribe
	HEAT SEAL	1730LB-1	HEAT SEAL 1730LB-1 MANUAL L BAR SEALER WITH: SEALING DIMENSIONS: WIDTH: 18 INCHES LENGTH: 30 INCHES OPENING HEIGHT: 10 INCHES MAXIMUM WEB WIDTH: 18 INCHES PERFORATOR ATTACHMENT CONVEYOR DIMENSIONS: LENGTH: 33 INCHES WIDTH: 13 INCHES ELECTRICAL REQUIREMENTS: 115 VOLTS, 60 HETZ, 20 AMPS OVERALL DIMENSIONS: LENGTH: 62 INCHES WIDTH: 24 INCHES HEIGHT: 40 INCHES	🔒 Subscribe
		HEAT SEAL 8.5" TALL APERTURE HEAT SHRINK TUNNEL	HEAT SEAL 8.5" TALL APERTURE HEAT SHRINK TUNNEL WITH: APERTURE DIMENSIONS: LENGTH: 18 INCHES HEIGHT: 8.5 INCHES TUNNEL LENGTH: 32 INCHES CONVEYOR WIDTH: 16 INCHES STAINLESS STEEL CONSTRUCTION ON CASTERS ELECTRICAL REQUIREMENTS: 220 VOLTS, 50/60 HERTZ, 40 AMPS OVERALL DIMENSIONS: LENGTH: 5 FEET WIDTH: 26 INCHES HEIGHT: 58 INCHES	🔒 Subscribe
	SCALE SYSTEMS	GSE 3501	FLOOR SCALE WITH: SCALE DIMENSIONS: LENGTH: 30 INCHES WIDTH: 25 INCHES ELECTRICAL REQUIREMENTS: 250 VOLTS, 50/60 HERTZ, 3 PHASE OVERALL DIMENSIONS: LENGTH: 43 INCHES WIDTH: 41 INCHES HEIGHT: 4 FEET	🔒 Subscribe
	CVC	300 II	CVC 300 II WRAPAROUND PRESSURE SENSITIVE LABELER WITH: MAXIMUM LABEL DIMENSIONS: LENGTH: 12 INCHES WIDTH: 9 INCHES MINIMUM LABEL DIMENSIONS: LENGTH: 5/8 INCH WIDTH: 3/8 INCH CAPACITY: UP TO 170 BOTTLES PER MINUTE CONVEYOR DIMENSIONS: LENGTH: 71 INCHES WIDTH: 4 INCHES STAINLESS STEEL CONSTRUCTION ELECTRICAL REQUIREMENTS: 110 VOLTS, 50/60 HERTZ, 3 PHASE APPROXIMATE OVERALL DIMENSIONS (INCHES): 85 LONG X 43 WIDE X 64 HIGH	🔒 Subscribe
	C.E. KING	SC4	C.E. KING SC4 TABLET COUNTER WITH: SPEED: UP TO 100 CONTAINERS PER MINUTE CHANGE PARTS NEEDED ON CASTERS ELECTRICAL REQUIREMENTS: 220 VOLTS, 60 HERTZ, 1 PHASE OVERALL DIMENSIONS: LENGTH: 44 INCHES WIDTH: 20 INCHES HEIGHT: 62 INCHES	🔒 Subscribe
	MARBURG IND		MARBURG IND HEAT SHRINK TUNNEL WITH CONVEYOR WITH: APERTURE DIMENSIONS: WIDTH: 4 INCHES HEIGHT: 4 INCHES WORKING APERTURE DIMENSIONS: WIDTH: 2.5 INCHES HEIGHT: 4 INCHES TUNNEL LENGTH: 22 INCHES CONVEYOR DIMENSIONS: LENGTH: 31 INCHES WIDTH: 10 INCHES VARIABLE HEAT TEMPERATURE OVERALL DIMENSIONS: LENGTH: 32 INCHES WIDTH: 22 INCHES HEIGHT: 54 INCHES	🔒 Subscribe
	SWIFTPACK		SWIFTPACK PILL COUNTER WITH: BATCH AMOUNT: 2 TO 9,999 DESIGNED TO FEED AND COUNT ANY SIZE, SHAPE OR QUANTITY OF TABLETS ELECTRICAL REQUIREMENTS: 120 VOLTS, 60 HERTZ, 1 PHASE	🔒 Subscribe
2016	BOSSAR	B-3700	2016 BOSSAR B-3700 HORIZONTAL POUCH FFS AND ZIPPER WITH: PRODUCTION OUTPUT RATE: 60-90 BAGS PER MINUTE DUAL FILLING, SEALING, AND DISCHARGE 2 FILL STATIONS 4 SIDED BAG SEAL MINIMUM POUCH SIZE 160X215 MILLIMETERS MAXIMUM POUCH SIZE 185X310 MILLIMETERS ZIPPER APPLICATOR NITROGEN DOSER POUCH STYLE: PILLOW OR GUSSET POUCH DIMENSIONS: WIDTH: 5-7.5 INCHES HEIGHT: 5-15 INCHES CURRENT POUCH DIMENSIONS: WIDTH: 6 INCHES HEIGHT: 9.5 INCHES MAXIMUM FILLING WEIGHT: 9.5 OUNCES REBUILD IN 2016 POWER SUPPLY: 480 / 3 PHASE / 60 HERTZ LAST RUNNING POUCHES OF SHREDDED CHEESE ELECTRICAL INFORMATION 480 VOLTAGE 3 PHASE 60 HERTZ	🔒 Subscribe
			USED 142.5" L BY 33" W BLUE BELT INCLINE CONVEYOR WITH: INFEED: 15 INCHES BELT WIDTH: 33 INCHES LANING RAILS: 26 INCHES DOWN TO 23 INCHES WIDE DISCHARGE: 6 FOOT INFEED SLANT OF CONVEYOR: 124 INCHES DISCHARGE STRAIGHT OF CONVEYOR: 18.5 INCHES (APPROXIMATELY) GEARED MOTOR	🔒 Subscribe
			USED 129" L BY 14" W CLEATED INCLINE CONVEYOR WITH: Z-STYLE DESIGN INFEED: FROM GROUND: 18 INCHES LENGTH: 36 INCHES DISCHARGE: LENGTH: 20 INCHES (APPROXIMATELY) FROM GROUND: 87 INCHES SLANT IN CONVEYOR: 73 INCHES LONG CLEAT DIMENSIONS: WIDTH: 11 INCHES HEIGHT: 2 INCHES FLIGHT: 8 INCHES	🔒 Subscribe
	HINDS-BOCK	4P-08NT	HINDS-BOCK 4P-08NT TABLE TOP 4 PISTON MUFFIN DEPOSITOR - USED HINDS-BOCK 4P-08NT TABLE TOP 4 PISTON MUFFIN DEPOSITOR WITH: PAN SIZES UP TO 26.5 INCHES WIDE UP TO 1200 DOZEN MUFFINS PER HOUR DEPENDING ON PRODUCT ADJUSTABLE DEPOSIT WEIGHTS WITH CHANGE PARTS: MINIMUM: 1 OUNCE MAXIMUM: 9 OUNCES VARIABLE CYCLE SPEED PISTON HEADS: 4 APPROXIMATELY 28 GALLON HOPPER AIR REQUIREMENTS: 80 PSI, 8 CFMS. USED HINDS-BOCK 5P-08WT TABLE TOP 5 PISTON MUFFIN DEPOSITER WITH: PAN SIZES UP TO 26.5 INCHES WIDE UP TO 1200 DOZEN MUFFINS PER HOUR DEPENDING ON PRODUCT ADJUSTABLE DEPOSIT WEIGHTS WITH CHANGE PARTS: MINIMUM: 1 OUNCE MAXIMUM: 9 OUNCES VARIABLE CYCLE SPEED PISTON HEADS: 5 APPROXIMATELY 28 GALLON HOPPER AIR REQUIREMENTS: 80 PSI, 8 CFMS	🔒 Subscribe
			PNEUMATIC LIQUID PRESS WITH JACKETED HOPPER: HOPPER CAPACITY: 3 GALLONS; JACKETED HOPPER MAWP: 50 PSI @ 300F; MDMT: -20F @ 50 PSI; STAINLESS STEEL CONSTRUCTION; OVERALL DIMENSIONS: LENGTH: 28 INCHES; WIDTH: 28 INCHES; HEIGHT: 73 INCHES	🔒 Subscribe
	PREFERRED PACKAGING	PP2028HK	PREFERRED PACKAGING PP2028HK MANUAL L-BAR SEALER - USED PREFERRED PACKAGING L-BAR SEALER WITH: SEAL AREA DIMENSIONS: LENGTH: 20 INCHES WIDTH: 28 INCHES MAXIMUM FILM ROLL WIDTH: 25 INCHES EXIT CONVEYOR WIDTH: 17 INCHES DISCHARGE HEIGHT: 34 INCHES ON CASTERS ELECTRICAL: 220 VOLTS, 60 HZ, PHASE 1, 15 AMPS	🔒 Subscribe
	CDA	E-FILL	CDA E-FILL FILLER, CAPPER, AND LABELING SYSTEM WITH: E-CIGARETTE VIAL FILLING MACHINE. STAINLESS STEEL CONSTRUCTION. CONVEYOR DIMENSIONS: LENGTH: 10 FEET, WIDTH: 3.25 INCHES, FROM GROUND: 38 INCHES. OUTPUT: 25 PRODUCTS PER MINUTE WHILE APPLYING 2 LABELS. PRODUCT RANGE: 5 MILLILITERS TO 1 LITER WITH A MAX DIAMETER OF 90 MILLIMETERS. MEMORIZATION OF UP TO 50 DIFFERENT PRODUCT DRESSINGS. LABEL WINDUP DIAMETER: 1 FOOT (APPROXIMATELY). LABELING PLATE: LENGTH: 6.75 INCHES, WIDTH: 6.5 INCHES. ELECTRICAL: 208-250 VOLTS, 1 PHASE, 60 HERTZ, 16 AMPS. MISSING FILLER NOT SAFE FOR FOOD	🔒 Subscribe
			PLASTIC MAT TOP INCLINED CONVEYOR 92" DISCHARGE - USED INCLINED CONVEYOR WITH: INFEED HEIGHT: 30 INCHES PLASTIC MAT TOP BELT: WIDTH: 24 INCHES DISCHARGE HEIGHT: 92 INCHES OVERALL HEIGHT: 95 INCHES ELECTRIC MOTOR AND GEAR REDUCER: NOT WASH-DOWN CAPABLE PRODUCT GUIDE RAILS AND BOTTOM RAIL STAINLESS STEEL FRAME AND RAIL CONSTRUCTION MOUNTED ON LOCKING SWIVEL CASTERS	🔒 Subscribe
	LOVESHAW	SP304	LOVESHAW SP304 2 INCH TOP & BOTTOM CASE TAPER - USED LOVESHAW CASE TAPER WITH: TOP & BOTTOM TAPEHEADS: 2 INCH SIDE DRIVE BELTS: HEIGHT: 2 INCHES SPEED: 72 FEET PER MINUTE FLAP FOLDERS CASE CAPACITY: LENGTH: 6 TO 24 INCHES WIDTH: 4.5 TO 20 INCHES HEIGHT: 4.5 TO 24 INCHES ELECTRICAL REQUIREMENTS: VOLTAGE: 110V PHASE: 1 FREQUENCY: 60 HZ CURRENT: 7.6 AMPS MANUALLY ADJUSTABLE HEIGHT AND WIDTH PUSHBUTTON START AND STOP CONTROLS MOUNTED ON ADJUSTABLE HEIGHT LEGS WITH LOCKING SWIVEL CASTERS	🔒 Subscribe
	HINDS-BOCK	5P-08WT	HINDS-BOCK 5P-08WT TABLE TOP 5 PISTON MUFFIN DEPOSITOR WITH: PAN SIZES UP TO 26.5 INCHES WIDE UP TO 1200 DOZEN MUFFINS PER HOUR DEPENDING ON PRODUCT ADJUSTABLE DEPOSIT WEIGHTS VARIABLE CYCLE SPEED 5 PISTON HEADS 39 GALLON HOPPER HOPPER WIDTH: 44.25 INCHES YAMATO DP-6200 DIGITAL SCALE AIR REQUIREMENTS: 80 PSI, 8 CFMS	🔒 Subscribe
	HIBAR		HIBAR SERVO DISPENSING SYSTEM WITH: STAINLESS STEEL CONSTRUCTION 3.2 HORSEPOWER DIGITAL CONTROL PANEL EMERGENCY STOP ELECTRICAL REQUIREMENTS: 100/240 VOLTS, 50/60 HERTZ, 1 PHASE OVERALL DIMENSIONS: LENGTH: 34 INCHES WIDTH: 19 INCHES HEIGHT: 28 INCHES	🔒 Subscribe
	LANTECH	SW-3000	LANTECH SW-3000 AUTOMATIC SIDE SEAL SHRINK WRAPPER: SPEED: UP TO 75 PACKAGES PER MINUTE MAXIMUM PRODUCT DIMENSIONS: LENGTH: 40 INCHES WIDTH: 15 INCHES HEIGHT: 8 INCHES MINIMUM PRODUCT DIMENSIONS: LENGTH: 3 INCHES WIDTH: 1.5 INCHES HEIGHT: 1/8 INCH FILM ROLL SIZE: MINIMUM: 6 INCHES MAXIMUM: 24 INCHES CONVEYOR DIMENSIONS: WIDTH: 15 INCHES HEIGHT: 36 INCHES SEAL BAR WIDTH: 18 INCHES PRODUCT DETECTION SEALING MECHANISM: HOT KNIFE CONTINUOUS MOTION AIR REQUIREMENTS: 8-12 CUBIC FEET PER MINUTE AT 85 PSI ELECTRICAL REQUIREMENTS: 230 VOLTS, 60 HERTZ, 1 PHASE APPROXIMATE OVERALL DIMENSIONS: LENGTH: 153 INCHES WIDTH: 40 INCHES HEIGHT: 66 INCHES	🔒 Subscribe
	LOVESHAW	SP304	LOVESHAW SP304 2 INCH TOP & BOTTOM CASE TAPER - USED LOVESHAW CASE TAPER WITH: TOP & BOTTOM TAPEHEADS: 2 INCH SIDE DRIVE BELTS: HEIGHT: 2 INCHES SPEED: 72 FEET PER MINUTE FLAP FOLDERS CASE CAPACITY: LENGTH: 6 TO 24 INCHES WIDTH: 4.5 TO 20 INCHES HEIGHT: 4.5 TO 24 INCHES ELECTRICAL REQUIREMENTS: VOLTAGE: 110V PHASE: 1 FREQUENCY: 60 HZ CURRENT: 8.4 AMPS MANUALLY ADJUSTABLE HEIGHT AND WIDTH PUSHBUTTON START AND STOP CONTROLS MOUNTED ON ADJUSTABLE HEIGHT LEGS WITH LOCKING SWIVEL CASTERS	🔒 Subscribe
	WEILER	SS AGITATED AUGER FEEDER	WEILER SS AGITATED AUGER FEEDER WITH: STAINLESS STEEL CONSTRUCTION BLENDER DIMENSIONS: WIDTH: 71.5 INCHES LENGTH: 60 INCHES HEIGHT: 70 INCHES DISCHARGE DIMENSIONS: WIDTH: 24 INCHES LENGTH: 22 INCHES	🔒 Subscribe
			40" ROTARY ACCUMULATION TABLE WITH: DIAMETER: 40 INCHES VARIABLE FREQUENCY DRIVE STAINLESS STEEL CONSTRUCTION ON CASTERS 1/8 HORSEPOWER MOTOR ELECTRICAL REQUIREMENTS: 115/230 VOLTS, 50/60 HERTZ OVERALL DIMENSIONS: LENGTH: 45 INCHES HEIGHT: 39 INCHES	🔒 Subscribe
	ACCUTEK		ACCUTEK PISTON FILLER: TABLE TOP DESIGN DIRECT FEED STYLE SECO GUAGES	🔒 Subscribe

WEILER MH30

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

WEILER MH30 STAINLESS STEEL INCLINE AUGER CONVEYOR 16" DIAMETER - USED WEILER AUGER CONVEYOR WITH: I...

Hammer Price: 🔒

WEILER MH30

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

WEILER MH30 STAINLESS STEEL INCLINE AUGER CONVEYOR - USED WEILER AUGER CONVEYOR WITH: INCLINED INFEE...

Hammer Price: 🔒

HOBART 4356

FOOD PROCESSING AND RESTAURANT EQUIPMENT

HOBART 4356 MIXER GRINDER WITH: PRODUCTION RATE: UP TO 160 POUNDS PER MINUTE CAPACITY: 500 POUNDS OV...

Hammer Price: 🔒

RITE HITE LITESPEED

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

RITE HITE LITESPEED HIGH PERFORMANCE ROLL UP DOOR WITH: LIFTING SPEED: UP TO 65 INCHES PER SECOND OV...

Hammer Price: 🔒

LANTECH C-300

PACKAGING EQUIPMENT

LANTECH C-300 CASE ERECTOR WITH: OUTPUT: UP TO 10 CASES PER MINUTE CASE SIZE RANGE: MINIMUM (INCHES)...

Hammer Price: 🔒

LANTECH C-300

PACKAGING EQUIPMENT

LANTECH C-300 CASE ERECTOR WITH: CASE SIZE RANGE: MINIMUM (INCHES): 7.875 LONG X 5.875 WIDE X 5.875 ...

Hammer Price: 🔒

MISC

SERVO DRIVEN FILM SPLICING SYSTEM WITH PERSONNEL GUARDING - USED SPLICER WITH: ACOPOS SERVO DRIVES L...

Hammer Price: 🔒

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

USED 83" BY 4.5" PLASTIC MAT-TOP CONVEYOR WITH: CONVEYOR DIMENSIONS: LENGTH: 83 INCHES WIDTH: 4.5 IN...

Hammer Price: 🔒

SHANKLIN T-62

PACKAGING EQUIPMENT

SHANKLIN T-62 HEAT SHRINK TUNNEL: VARIABLE BELT SPEED: MINIMUM: 25 FEET PER MINUTE MAXIMUM: UP TO 15...

Hammer Price: 🔒

JUMO IMAGO F3000

MISC

JUMO IMAGO F3000 CONTROL BOX - JUMO ELECTRICAL CONTROL BOX...

Hammer Price: 🔒

LABELING SYSTEMS 301

PACKAGING EQUIPMENT

LABELING SYSTEMS 301 PRESSURE SENSITIVE LABELER WITH: ROLL WIDTH: 3 INCHES STAINLESS STEEL CONSTRUCT...

Hammer Price: 🔒

HONEYWELL MOUTROL

ELECTRICAL AND POWER GENERATION EQUIPMENT

(2) CONTROL CABINETS (3) HONEYWELL MOUTROL MOTORS BOX OF MISCELLANEOUS ELECTRICAL COMPONENTS...

Hammer Price: 🔒

FOOD PROCESSING AND RESTAURANT EQUIPMENT

STAINLESS STEEL CONSTRUCTION. ON CASTERS. OVERALL DIMENSIONS PER TABLE: LENGTH: 42.5 INCHES WIDTH: 2...

Hammer Price: 🔒

MISC

DIGITAL SS TABLE TOP SCALE - SS TABLE TOP SCALE: DIGITAL...

Hammer Price: 🔒

PACKAGING EQUIPMENT

DUAL CHAMBER VACUUM BAG SEALER - USED VACUUM BAG SEALER WITH: SEAL DIMENSIONS: LENGTH: 34 INCHES WID...

Hammer Price: 🔒

JUMO IMAGO F3000

MISC

JUMO IMAGO F3000 CONTROL BOX - USED JUMO ELECTRICAL CONTROL CABINET...

Hammer Price: 🔒

TRIEF PUMA 700F

FOOD PROCESSING AND RESTAURANT EQUIPMENT

TRIEF PUMA 700F SLICER - RUNS UP TO 400 SLICES PER MINUTE (WITH A DOUBLE KNIFE) LOADING CHAMBER DIME...

Hammer Price: 🔒

REJVES FOUR STATION SNAP CAPPER

PACKAGING EQUIPMENT

REJVES FOUR STATION SNAP CAPPER WITH: SNAP CAP: 1.5 INCHES INFEED/DISCHARGE: 37 INCHES CONVEYOR WIDT...

Hammer Price: 🔒

KAWASAKI ROBOTICS RS005N

INDUSTRIAL AUTOMATION, CONTROLS & ROBOTICS

KAWASAKI ROBOTICS RS005N SNAP CAPPER WITH: CONVEYOR: LENGTH: 10 FEET WIDTH: 5.5 INCHES INFEED: 35 IN...

Hammer Price: 🔒

TANKS, PUMPS & STORAGE EQUIPMENT

1000 GALLON STAINLESS STEEL TANK WITH: CAPACITY: 1000 GALLONS MANWAY DIAMETER: 22 INCHES DISCHARGE D...

Hammer Price: 🔒

TANKS, PUMPS & STORAGE EQUIPMENT

1000 GALLON STAINLESS STEEL TANK WITH: CAPACITY: 1000 GALLONS MANWAY DIAMETER: 22 INCHES DISCHARGE D...

Hammer Price: 🔒

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

139" BY 12" SMOOTH TOP BELT CONVEYOR WITH: INFEED HEIGHT: 37 INCHES CONVEYOR DIMENSIONS: LENGTH: 139...

Hammer Price: 🔒

MISC

USED 48" ROTARY ACCUMULATION TABLE WITH: DIAMETER: 48 INCHES INFEED HEIGHT: 44 INCHES STAINLESS STEE...

Hammer Price: 🔒

WELDOTRON 22" W X 14" H

PACKAGING EQUIPMENT

WELDOTRON 22" W X 14" H HEAT SHRINK TUNNEL WITH: APERTURE DIMENSIONS: WIDTH: 22 INCHES HEIGHT: 14 IN...

Hammer Price: 🔒

SHANKLIN T-6XL

PACKAGING EQUIPMENT

SHANKLIN T-6XL HEAT SHRINK TUNNEL 18" WIDE X 12" HIGH - USED SHANKLIN HEAT SHRINK TUNNEL WITH: APERT...

Hammer Price: 🔒

MISC

USED 36" ROTARY ACCUMULATION TABLE WITH: DIAMETER: 36 INCHES INFEED HEIGHT: 42 INCHES STAINLESS STEE...

Hammer Price: 🔒

MISC

USED 36" ROTARY ACCUMULATION TABLE WITH: DIAMETER: 36 INCHES STAINLESS STEEL CONSTRUCTION ON CASTERS...

Hammer Price: 🔒

HEAT SEAL 1730LB-1

PACKAGING EQUIPMENT

HEAT SEAL 1730LB-1 MANUAL L BAR SEALER WITH: SEALING DIMENSIONS: WIDTH: 18 INCHES LENGTH: 30 INCHES ...

Hammer Price: 🔒

HEAT SEAL 8.5" TALL APERTURE HEAT SHRINK TUNNEL

PACKAGING EQUIPMENT

HEAT SEAL 8.5" TALL APERTURE HEAT SHRINK TUNNEL WITH: APERTURE DIMENSIONS: LENGTH: 18 INCHES HEIGHT:...

Hammer Price: 🔒

SCALE SYSTEMS GSE 3501

MISC

FLOOR SCALE WITH: SCALE DIMENSIONS: LENGTH: 30 INCHES WIDTH: 25 INCHES ELECTRICAL REQUIREMENTS: 250 ...

Hammer Price: 🔒

CVC 300 II

PACKAGING EQUIPMENT

CVC 300 II WRAPAROUND PRESSURE SENSITIVE LABELER WITH: MAXIMUM LABEL DIMENSIONS: LENGTH: 12 INCHES W...

Hammer Price: 🔒

C.E. KING SC4

PHARMACEUTICAL MANUFACTURING EQUIPMENT

C.E. KING SC4 TABLET COUNTER WITH: SPEED: UP TO 100 CONTAINERS PER MINUTE CHANGE PARTS NEEDED ON CAS...

Hammer Price: 🔒

MARBURG IND

PACKAGING EQUIPMENT

MARBURG IND HEAT SHRINK TUNNEL WITH CONVEYOR WITH: APERTURE DIMENSIONS: WIDTH: 4 INCHES HEIGHT: 4 IN...

Hammer Price: 🔒

SWIFTPACK

MISC

SWIFTPACK PILL COUNTER WITH: BATCH AMOUNT: 2 TO 9,999 DESIGNED TO FEED AND COUNT ANY SIZE, SHAPE OR ...

Hammer Price: 🔒

2016 BOSSAR B-3700

PACKAGING EQUIPMENT

2016 BOSSAR B-3700 HORIZONTAL POUCH FFS AND ZIPPER WITH: PRODUCTION OUTPUT RATE: 60-90 BAGS PER MINU...

Hammer Price: 🔒

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

USED 142.5" L BY 33" W BLUE BELT INCLINE CONVEYOR WITH: INFEED: 15 INCHES BELT WIDTH: 33 INCHES LANI...

Hammer Price: 🔒

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

USED 129" L BY 14" W CLEATED INCLINE CONVEYOR WITH: Z-STYLE DESIGN INFEED: FROM GROUND: 18 INCHES LE...

Hammer Price: 🔒

HINDS-BOCK 4P-08NT

FOOD PROCESSING AND RESTAURANT EQUIPMENT

HINDS-BOCK 4P-08NT TABLE TOP 4 PISTON MUFFIN DEPOSITOR - USED HINDS-BOCK 4P-08NT TABLE TOP 4 PISTON ...

Hammer Price: 🔒

MISC

PNEUMATIC LIQUID PRESS WITH JACKETED HOPPER: HOPPER CAPACITY: 3 GALLONS; JACKETED HOPPER MAWP: 50 PS...

Hammer Price: 🔒

PREFERRED PACKAGING PP2028HK

PACKAGING EQUIPMENT

PREFERRED PACKAGING PP2028HK MANUAL L-BAR SEALER - USED PREFERRED PACKAGING L-BAR SEALER WITH: SEAL ...

Hammer Price: 🔒

CDA E-FILL

PACKAGING EQUIPMENT

CDA E-FILL FILLER, CAPPER, AND LABELING SYSTEM WITH: E-CIGARETTE VIAL FILLING MACHINE. STAINLESS STE...

Hammer Price: 🔒

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

PLASTIC MAT TOP INCLINED CONVEYOR 92" DISCHARGE - USED INCLINED CONVEYOR WITH: INFEED HEIGHT: 30 INC...

Hammer Price: 🔒

LOVESHAW SP304

PACKAGING EQUIPMENT

LOVESHAW SP304 2 INCH TOP & BOTTOM CASE TAPER - USED LOVESHAW CASE TAPER WITH: TOP & BOTTOM TAPEHEAD...

Hammer Price: 🔒

HINDS-BOCK 5P-08WT

FOOD PROCESSING AND RESTAURANT EQUIPMENT

HINDS-BOCK 5P-08WT TABLE TOP 5 PISTON MUFFIN DEPOSITOR WITH: PAN SIZES UP TO 26.5 INCHES WIDE UP TO ...

Hammer Price: 🔒

HIBAR

MISC

HIBAR SERVO DISPENSING SYSTEM WITH: STAINLESS STEEL CONSTRUCTION 3.2 HORSEPOWER DIGITAL CONTROL PANE...

Hammer Price: 🔒

LANTECH SW-3000

PACKAGING EQUIPMENT

LANTECH SW-3000 AUTOMATIC SIDE SEAL SHRINK WRAPPER: SPEED: UP TO 75 PACKAGES PER MINUTE MAXIMUM PROD...

Hammer Price: 🔒

LOVESHAW SP304

PACKAGING EQUIPMENT

LOVESHAW SP304 2 INCH TOP & BOTTOM CASE TAPER - USED LOVESHAW CASE TAPER WITH: TOP & BOTTOM TAPEHEAD...

Hammer Price: 🔒

WEILER SS AGITATED AUGER FEEDER

MISC

WEILER SS AGITATED AUGER FEEDER WITH: STAINLESS STEEL CONSTRUCTION BLENDER DIMENSIONS: WIDTH: 71.5 I...

Hammer Price: 🔒

MISC

40" ROTARY ACCUMULATION TABLE WITH: DIAMETER: 40 INCHES VARIABLE FREQUENCY DRIVE STAINLESS STEEL CON...

Hammer Price: 🔒

ACCUTEK

PACKAGING EQUIPMENT

ACCUTEK PISTON FILLER: TABLE TOP DESIGN DIRECT FEED STYLE SECO GUAGES...

Hammer Price: 🔒

1 2 3 4 Next >>

Disclaimer: BidSeek aggregates publicly available auction and liquidation results from independent third-party sources for research and valuation reference only. BidSeek is not affiliated with, endorsed by, sponsored by, or operated in connection with any auction house, marketplace, or liquidation firm. All data and images are provided as-is for informational purposes and remain the property of their respective owners.

Recent Searches

Login

Reset Password

Monthly SIGMA Showroom Floor Auction

Save to Project Folder

Print Options

Save to Project Folder