• Items
  • Auctions
  • Auctioneers
  • Items
  • Auctions
  • Auctioneers

Surplus to the Continuing Operations of a WorldClass Motorcycle Manufacturer

Prestige Equipment Auctions
Category: METALWORKING & FABRICATION EQUIPMENT
Total Lots: 48
Total Sales: 🔒 Subscribe
Lot Price Distribution
🔒
Subscribe to view
Unlock price distribution and full auction analytics
Sort:
Showing 1–48 of 48 lots
Year Make Model Lot Description Hammer Price
RAVENSBURG 100" X 254" RAVENSBURG 100" X 254"
RAVENSBURG 100" X 254" MANUAL LATHE WITH CRANE ROPE DRUM THREADING, 84" O/C, 63" 4-JAW CHUCK, 240 RPM, CRANE ROPE THREADING, COPY DEVICE, 19.8 TON CAPACITY
RAVENSBURG · 100" X 254"
 🔒 Subscribe
2007 MAKINO A71 2007 MAKINO A71
2007 MAKINO A71 HORIZONTAL MACHINING CENTER, 19.7 X 19.7 TABLES, X-AXIS TRAVEL: 28.7, Y-AXIS TRAVEL: 28.7, Z-AXIS TRAVEL: 31.5, 60 ATC, CAT 50 SPINDLE TAPER, PROFESSIONAL 5 CNC CONTROL, COOLANT TANK, CHIP CONVEYOR, CHIP BLASTER S/N: 439
2007 · MAKINO · A71
 🔒 Subscribe
2004 MAKINO A71 2004 MAKINO A71
2004 MAKINO A71 HORIZONTAL MACHINING CENTER, 19.7 X 19.7 TABLES, X-AXIS TRAVEL: 28.7, Y-AXIS TRAVEL: 28.7, Z-AXIS TRAVEL: 31.5, 60 ATC, CAT 50 SPINDLE TAPER, PROFESSIONAL 3 CNC CONTROL, COOLANT TANK, CHIP CONVEYOR, CHIP BLASTER
2004 · MAKINO · A71
 🔒 Subscribe
HARDINGE QUEST 8/51 HARDINGE QUEST 8/51
HARDINGE QUEST 8/51 CNC LATHE WITH LIVE MILLING, 20.4" SWING, 12.1" MAX. TURNING DIAMETER, 7.4" X-AXIS TRAVEL, 24" Z-AXIS TRAVEL, 2.3" SPINDLE THRU-HOLE, 12-STATION TURRET, C-AXIS, LIVE MILLING, 80-8,000 RPM SPINDLE SPEEDS, FANUC 18I-T CNC CONTROL, LNS QL-SERVO S3 MAGAZINE BAR FEED, S/N QC-556
HARDINGE · QUEST 8/51
 🔒 Subscribe
2003 HESS-MAE M-AH-40RH-750 2003 HESS-MAE M-AH-40RH-750
2003 HESS-MAE M-AH-40RH-750 AUTOMATIC SHAFT STRAIGHTENING PRESS, 40-TON STRAIGHTENING FORCE, 29.5 MAX. WIDTH BETWEEN CENTERS, INFEED AND EXIT CONVEYOR, ALLEN BRADLEY PANELVIEW 600 OPERATOR INTERFACE, S/N WO-4966
2003 · HESS-MAE · M-AH-40RH-750
 🔒 Subscribe
1999 HARDINGE CONQUEST 51 1999 HARDINGE CONQUEST 51
1999 HARDINGE CONQUEST 51 HARDINGE CONQUEST 51 CNC LATHE WITH LIVE MILLING, MODEL CS-51, 26" SWING OVER WAYS, 6.75" X-AXIS TRAVEL, 22.87" Z- AXIS TRAVEL, 630 IPM RAPID TRAVERSE X & Y AXES, 4200 RPM SPINDLE SPEEDS, 6.5" COLLET CHUCK, 12-POSITION TURRET WITH 6-LIVE STATIONS, SUB-SPINDLE, CHIP CONVEYOR, FANUC 18-T CNC CONTROL, S/N CL-852-BC
1999 · HARDINGE · CONQUEST 51
 🔒 Subscribe
1999 HARDINGE CONQUEST 51 1999 HARDINGE CONQUEST 51
1999 HARDINGE CONQUEST 51 CNC LATHE WITH LIVE MILLING, 26" SWING OVER WAYS, 6.75" X-AXIS TRAVEL, 22.87" Z- AXIS TRAVEL, 630 IPM RAPID TRAVERSE X & Y AXES, 4200 RPM SPINDLE SPEEDS, 6.5" COLLET CHUCK, 12-POSITION TURRET WITH 6-LIVE STATIONS, SUB-SPINDLE, CHIP CONVEYOR, FANUC 18-T CNC CONTROL, S/N CL-931-BC
1999 · HARDINGE · CONQUEST 51
 🔒 Subscribe
2001 TRAUB TNC 42-65 DGY 2001 TRAUB TNC 42-65 DGY
2001 TRAUB TNC 42-65 DGY CNC LATHE, MAIN AND SUB SPINDLES, UPPER AND LOWER TURRETS, CHIP CONVEYOR, EQUIPPED WITH TRAUB TX 8H CNC CONTROL, S/N 887
2001 · TRAUB · TNC 42-65 DGY
 🔒 Subscribe
1999 TRAUB TNC 42/65 DGY 1999 TRAUB TNC 42/65 DGY
1999 TRAUB TNC 42/65 DGY CNC LATHE, MAIN AND SUB SPINDLES, UPPER AND LOWER TURRETS, CHIP CONVEYOR, EQUIPPED WITH TRAUB TX 8F CNC CONTROL, S/N 739
1999 · TRAUB · TNC 42/65 DGY
 🔒 Subscribe
2001 TRAUB TNC 42-65 2001 TRAUB TNC 42-65
2001 TRAUB TNC 42-65 CNC LATHE, MAX TURNING LENGTH 17.71", DIAMETER IN FRONT BEARING 4.33", X AXIS SLIDES S1 AND S2 FEED TRAVEL 5.51", Z AXIS SLIDES S1 AND S2 17.71", TOOL CARRIER POSITIONS, W1 AND W2 14 (10) / 10 (14), MAIN & OPPOSED SPINDLE SPEEDS 5600/4000 RPM, C-AXIS ON MAIN SPINDLE, EQUIPPED WITH TRAUB SYSTEM TX 8H CNC CONTROL, CHIP CONVEYOR, S/N 904
2001 · TRAUB · TNC 42-65
 🔒 Subscribe
LNS BAR FEED LNS BAR FEED
LNS BAR FEED
LNS · BAR FEED
 🔒 Subscribe
2004 PRAWEMA SYNCHROFINE HFSL203W 2004 PRAWEMA SYNCHROFINE HFSL203W
2004 PRAWEMA SYNCHROFINE HFSL203W HIGH PERFORMANCE CNC GEAR HONING MACHINE, 40-160MM WORKPIECE DIAMETER CAPACITY, 55MM MAX TEETH WIDTH, 200MM MAX SHAFT LENGTH, 0-1500 MIN-1 TOOL REVOLUTION, 0-6500 MIN-1 WORKPIECE SPINDLE, 1500 DAN MAX WORKPIECE CLAMPING, 1055MM X-TRAVEL, 300MM Z-TRAVEL, -10 +8 DEGREE HONING HEAD SWIVEL ANGLE, 0.01MM SMALLEST TRAVEL VALUE, 460/3/60 ELECTRICS, S/N 037 059
2004 · PRAWEMA · SYNCHROFINE HFSL203W
 🔒 Subscribe
1997 TRAUB TNC42/65DGY 1997 TRAUB TNC42/65DGY
1997 TRAUB TNC42/65DGY CNC LATHE, MAIN AND SUB SPINDLES, UPPER AND LOWER TURRETS, CHIP CONVEYOR, EQUIPPED WITH TRAUB TX 8F CNC CONTROL, S/N 555
1997 · TRAUB · TNC42/65DGY
 🔒 Subscribe
1995 TRAUB TNC 42/65 DGY 1995 TRAUB TNC 42/65 DGY
1995 TRAUB TNC 42/65 DGY CNC LATHE, MAIN AND SUB SPINDLES, UPPER AND LOWER TURRETS, REAR EXIT CHIP CONVEYOR, EQUIPPED WITH TRAUB TX 8F CNC CONTROL S/N 323
1995 · TRAUB · TNC 42/65 DGY
 🔒 Subscribe
1996 TRAUB TNC 42-65 1996 TRAUB TNC 42-65
1996 TRAUB TNC 42-65 CNC LATHE, MAX TURNING LENGTH 17.71", DIAMETER IN FRONT BEARING 4.33", X AXIS SLIDES S1 AND S2 FEED TRAVEL 5.51", Z AXIS SLIDES S1 AND S2 17.71", TOOL CARRIER POSITIONS, W1 AND W2 14 (10) / 10 (14), MAIN & OPPOSED SPINDLE SPEEDS 5600/4000 RPM, C-AXIS ON MAIN SPINDLE, EQUIPPED WITH TRAUB SYSTEM TX 8F CNC CONTROL, CHIP CONVEYOR, S/N 472
1996 · TRAUB · TNC 42-65
 🔒 Subscribe
OKUMA LFS10-2SP OKUMA LFS10-2SP
OKUMA LFS10-2SP TWIN-SPINDLE TWIN-TURRET CNC TURNING CENTER, 15.7" SWING OVER BED, 4.72" MAX TURNING DIAMETER, 3.14" MAX TURNING LENGTH, 1.57" BAR DIAMETER, 5.11" X-TRAVEL, 5.70" Z-TRAVEL, 50-6000 RPM SPINDLE SPEED, (2) 8-STATION FRONT-FACING TURRETS, OSP-U100L CNC CONTROLS, 220/480/3/60 ELECTRICS, S/N 0122
OKUMA · LFS10-2SP
 🔒 Subscribe
OKUMA LFS10-2SP OKUMA LFS10-2SP
OKUMA LFS10-2SP TWIN-SPINDLE TWIN-TURRET CNC TURNING CENTER, 15.7" SWING OVER BED, 4.72" MAX TURNING DIAMETER, 3.14" MAX TURNING LENGTH, 1.57" BAR DIAMETER, 5.11" X-TRAVEL, 5.70" Z-TRAVEL, 50-6000 RPM SPINDLE SPEED, (2) 8-STATION FRONT-FACING TURRETS, OSP-U100L CNC CONTROLS, 220/480/3/60 ELECTRICS, S/N 0225
OKUMA · LFS10-2SP
 🔒 Subscribe
1995 TRAUB TNC 42/65 DGY 1995 TRAUB TNC 42/65 DGY
1995 TRAUB TNC 42/65 DGY CNC LATHE S/N: 303 TRAUB TX 8F CNC CONTROL, S/N 303
1995 · TRAUB · TNC 42/65 DGY
 🔒 Subscribe
NORDSON NVC-4 NORDSON NVC-4
NORDSON NVC-4 PAINT BOOTH, 60" X 60" X 60" INTERIOR CABINET, 3 HP MOTOR, 230/460V
NORDSON · NVC-4
 🔒 Subscribe
AUTOMATED FINISHING 2V5 AUTOMATED FINISHING 2V5
AUTOMATED FINISHING 2V5 VIBRATORY FINISHING MACHINE, 36" X 12" X 16" 4-SECTION VIBRATORY CHAMBER, PNEUMATIC ACTUATED DOOR, CONTROL PANEL WITH OMRON H5CX PROCESS TIMER, 480/3/60 ELECTRICS
AUTOMATED FINISHING · 2V5
 🔒 Subscribe
Equipment
SHIELDED DRIVE ISOLATION TRANSFORMER 27 KVA
🔒 Subscribe
AUTOMATED FINISHING 4078 AUTOMATED FINISHING 4078
AUTOMATED FINISHING 4078 AUTOMATIC CONVEYOR PARTS WASHER, 11" CONVEYOR WIDTH, APPROX 14"X 8" PARTS WINDOW, WASH AND BLOW-OFF CYCLES, WASH TANK WITH WATLOW ELECTRIC TANK HEATERS, ALLEN BRADLEY PANELVIEW PLUS 600 INTERFACE, 480/3/60 ELECTRICS
AUTOMATED FINISHING · 4078
 🔒 Subscribe
AUTOMATED FINISHING 3905 AUTOMATED FINISHING 3905
AUTOMATED FINISHING 3905 PARTS WASHER, 25 "X 15" PARTS TRAY LOADER, 30" X 18" DOORWAY, PNEUMATIC ACTUATED DOOR, WASH TANK WITH WATLOW ELECTRIC TANK HEATERS, PLC CONTROL CABINET WITH ALLEN BRADLEY PANELVIEW 600 INTERFACE, 480/3/60 ELECTRICS
AUTOMATED FINISHING · 3905
 🔒 Subscribe
1997 CINCINNATI AVENGER 250S 1997 CINCINNATI AVENGER 250S
1997 CINCINNATI AVENGER 250S CNC SLANT BED TURNING CENTER WITH LIVE MILLING, BAR FEED, 12-POSITION TURRET, SUB-SPINDLE, ACRAMATIC 850SX CNC CONTROL, JORGENSEN CHIP CONVEYOR, 460/3/60 ELECTRICS, S/N 3650B0597-0012. EQUIPPED WITH LNS QL SERVO S2 AUTO BAR FEEDER S/N 301388 WITH CONTROL PENDANT
1997 · CINCINNATI · AVENGER 250S
 🔒 Subscribe
MINSTER E2-1000-144 HEVI-STAMPER MINSTER E2-1000-144 HEVI-STAMPER
MINSTER E2-1000-144 HEVI-STAMPER TWO POINT ECCENTRIC SHAFT, PROGRESSIVE DIE PRESS, 1000 TON, 144 X 60 BED AND SLIDE AREA, 8 STROKE, 6 SLIDE ADJUSTMENT, 27 SHUT HEIGHT OVER BOLSTER, 9 THICK T-SLOTTED BOLSTER, 0-50 STROKES PER MINUTE, HYD. CLUTCH AND BRAKE, 150 HP MOTOR, POWER DIE CHANGER, S/N: 29820
MINSTER · E2-1000-144 HEVI-STAMPER
 🔒 Subscribe
2000 DEHOFF/ KAYS ENGINEERING 518T 2000 DEHOFF/ KAYS ENGINEERING 518T
2000 DEHOFF/ KAYS ENGINEERING 518T GUN DRILLING MACHINE, 1/2" DIAMETER MILD STEEL DRILL CAPACITY, (2) DRILL HEADS, (4) SPINDLES, 18" DRILL STROKE, 0.1-30.0 IPM FEED RATE, 1000-8000 RPM SPINDLE SPEED, 3 HP SPINDLE, KAYS ENGINEERING 9-2402-001, 15" MAGNETIC CHIP CONVEYOR, 300 GAL5 HP HYDRAULIC POWER UNIT, ALLEN BRADLEY PANELVIEW 1000 INTERFACE, ALLEN BRADLEY SLC 504 PLCS, 460/3/60 ELECTRICS, S/N DH-1936
2000 · DEHOFF/ KAYS ENGINEERING · 518T
 🔒 Subscribe
2003 COLE-TUV CF-110 2003 COLE-TUV CF-110
2003 COLE-TUV CF-110 C-FRAME HYDRAULIC PRESS, 110 TON CAPACITY, .25"-11.8" ADJUSTABLE STROKE, 7.88" MAX SHUT HEIGHT, 19.6" DAYLIGHT (MAX OPENING), 10.2" THROAT DEPTH, 23.5" X 42.5" TABLE, DUAL PALM CONTROL, VARIABLE SPEED, 440/3/60 ELECTRICS, S/N CF/SB-1-22003 [RAM REBUILT IN 2019]
2003 · COLE-TUV · CF-110
 🔒 Subscribe
2000 JUNKER JUMAT 5002/50 2000 JUNKER JUMAT 5002/50
2000 JUNKER JUMAT 5002/50 CNC CYLINDRICAL GRINDER - JUNKER JUMAT 5002/50 CBN CNC SHAFT GRINDING MACHINE, FANUC SERIES 16 CNC CONTROL, AUTOMATIC LOADING CHAIN CYCLE CONVEYOR, (2) HF SPINDLE UNITS, B-AXIS, MARPOSS GAUGING, OBERLIN SUMP TANK, S/N 1798
2000 · JUNKER JUMAT · 5002/50
 🔒 Subscribe
2000 JUNKER JUMAT 5002/50 2000 JUNKER JUMAT 5002/50
2000 JUNKER JUMAT 5002/50 CNC CYLINDRICAL GRINDER - JUNKER JUMAT 5002/50 CBN CNC SHAFT GRINDING MACHINE, FANUC SERIES 16 CNC CONTROL, AUTOMATIC LOADING CHAIN CYCLE CONVEYOR, (2) HF SPINDLE UNITS, B-AXIS, MARPOSS GAUGING, OBERLIN SUMP TANK, S/N 1982
2000 · JUNKER JUMAT · 5002/50
 🔒 Subscribe
2003 EMAG REINECKER VSC-250-DDS 2003 EMAG REINECKER VSC-250-DDS
2003 EMAG REINECKER VSC-250-DDS CNC VERTICAL HARD TURNING AND FINISH GRINDING MACHINE, 9.84" MAX CHUCK DIAMETER, 10.23" MAX SWING, 3.46" X-TRAVEL, 7.87" Z-TRAVEL, 12.40" Y-TRAVE, 12-STATION TURRET, EQUIPPED WITH SIEMENS SINUMERIK CNC CONTROLS, 460/3/60 ELECTRICS, S/N M762.56847
2003 · EMAG REINECKER · VSC-250-DDS
 🔒 Subscribe
BROTHER TC-321 BROTHER TC-321
BROTHER TC-321 CNC DRILLING & TAPPING CENTER, TRAVELS: X-27.55", Y-11.81", Z-9.84", 31.49" X 11.81" T-SLOTTED TABLE, 10-POSITION TOOL TURRET, 6-6000 RPM SPINDLE SPEEDS, BT30 SPINDLE TAPER, BROTHER CNC CONTROL, 230/3/60 ELECTRICS, S/N 112126
BROTHER · TC-321
 🔒 Subscribe
2003 EMAG REINECKER VSC-250-DDS 2003 EMAG REINECKER VSC-250-DDS
2003 EMAG REINECKER VSC-250-DDS CNC VERTICAL HARD TURNING AND FINISH GRINDING MACHINE, 9.84" MAX CHUCK DIAMETER, 10.23" MAX SWING, 3.46" X-TRAVEL, 7.87" Z-TRAVEL, 12.40" Y-TRAVE, 12-STATION TURRET, EQUIPPED WITH SIEMENS SINUMERIK CNC CONTROLS, 460/3/60 ELECTRICS, S/N M762.56845
2003 · EMAG REINECKER · VSC-250-DDS
 🔒 Subscribe
1991 ANDERSON COOK 350 1991 ANDERSON COOK 350
1991 ANDERSON COOK 350 HYDRAULIC COLD ROLL SPLINE ROLLER, 56" STROKE, 48" MAX RACK LENGTH, 4.75" MAX RACK FACE WIDTH, 2.5" MAX PART DIAMETER, 16/32" MAX PITCH FORM, 1.587/0.794" MAX MODULE FORM, 30/44" MAX PART LENGTH, EQUIPPED WITH LIVE CENTER HEADSTOCK AND TAILSTOCK, 480/3/60 ELECTRICS, S/N 261
1991 · ANDERSON · COOK 350
 🔒 Subscribe
SUNNEN KGM-5000NTE-S3 SUNNEN KGM-5000NTE-S3
SUNNEN KGM-5000NTE-S3 HORIZONTAL CNC HONING MACHINE, 0.31-5.90" WORKPIECE CAPACITY, 4.4 LB MAX WORKPIECE WEIGHT, 250-3700 RPM/20-1000RPM SPINDLE SPEED, 33-500 SPM, KGM CNC CONTROLS, 460/3/60 ELECTRICS, S/N 4D1-1055
SUNNEN · KGM-5000NTE-S3
 🔒 Subscribe
2019 LNS QLS80 S2 2019 LNS QLS80 S2
2019 LNS QLS80 S2 QUICK LOAD SERVO BARFEEDER, 1/4" TO 3-1/8" BAR DIAMETER, 14" TO 63" LENGTH CAPACITY, S/N 27325401
2019 · LNS · QLS80 S2
 🔒 Subscribe
1999 HARDINGE CONQUEST 51 1999 HARDINGE CONQUEST 51
1999 HARDINGE CONQUEST 51 CNC LATHE WITH LIVE MILLING, 26" SWING OVER WAYS, 6.75" X-AXIS TRAVEL, 22.87" Z- AXIS TRAVEL, 630 IPM RAPID TRAVERSE X & Y AXES, 4200 RPM SPINDLE SPEEDS, 6.5" COLLET CHUCK, 12-POSITION TURRET WITH 6-LIVE STATIONS, SUB-SPINDLE, CHIP CONVEYOR, FANUC 18-T CNC CONTROL, S/N CL-554-BC
1999 · HARDINGE · CONQUEST 51
 🔒 Subscribe
2001 MORI SEIKI SL303A/700 2001 MORI SEIKI SL303A/700
2001 MORI SEIKI SL303A/700 CNC TURNING CENTER, S/N: 871 MORI SEIKI SL303A/700 CNC LATHE, MORI-MSG501 CNC CONTROLS, MAYFRAN CONSEP 2000 CHIP CONVEYOR, S/N: 871
2001 · MORI SEIKI · SL303A/700
 🔒 Subscribe
2001 MORI SEIKI SL303A/700 2001 MORI SEIKI SL303A/700
2001 MORI SEIKI SL303A/700 CNC TURNING CENTER, EQUIPPED WITH MSG501 CNC CONTROLS, MAYFRAN CONSEP 2000 CHIP CONVEYOR/ COOLANT RESERVOIR TANK, S/N87
2001 · MORI SEIKI · SL303A/700
 🔒 Subscribe
2008 GLOBAL FINISHING SOLUTIONS 2008 GLOBAL FINISHING SOLUTIONS
2008 GLOBAL FINISHING SOLUTIONS INDUSTRIAL SPRAY BOOTH, 104" X 60" X 120" H
2008 · GLOBAL FINISHING SOLUTIONS
 🔒 Subscribe
ABB IRB 3000 ABB IRB 3000
ABB IRB 3000 GENERAL PURPOSE ROBOT, 66LB - 30K LOAD CAPACITY, 78" REACH, 6 AXIS, CONTROL
ABB · IRB 3000
 🔒 Subscribe
2001 CAE RANSOHOFF 4066 2001 CAE RANSOHOFF 4066
2001 CAE RANSOHOFF 4066 3-STAGE AUTOMATIC CONVEYOR PARTS WASHER, 80 PALLETS PER HOUR, 0.5-5 FPM CONVEYOR SPEED, 2060 CHAIN CONVEYOR TYPE, 13" X 10" PARTS WINDOW, WASH STATION WITH 400 GAL TANK, WATLOW 100W ELECTRIC TANK HEATER, 160F WASH TEMP, RINSE STATION WITH 210 GALLON TANK, WATLOW 100W ELECTRIC TANK HEATER, 140F RINSE TEMP, EXHAUST FAN, HOT AIR BLOW-OFF STATION WITH BLOWER MOTOR AND GAS BURNER,ALLEN BRADLEY PANELVIEW 600 INTERFACE, 460V/3PH, S/N 4066
2001 · CAE RANSOHOFF · 4066
 🔒 Subscribe
MATTISON TYPE 100C MATTISON TYPE 100C
MATTISON TYPE 100C 5-SPINDLE ROTARY SURFACE GRINDER, 100" TABLE DIAMETER, (5) 40 HP SPINDLES, 16" RANGE OF WORK WITH FIXTURES, 20" WHEEL DIAMETER, EQUIPPED WITH AUTOMATIC SIZER, WHEEL DRESSER, ROTARY PARTS TABLE, TORIT DRYFLO MIST COLLECTOR, AUTO LUBRICATION, 460/3/60 ELECTRICS, S/N 100C-56
MATTISON · TYPE 100C
 🔒 Subscribe
KOOLANT KOOLERS HCV 1500-PR KOOLANT KOOLERS HCV 1500-PR
KOOLANT KOOLERS HCV 1500-PR CHILLER COMPRESSOR
KOOLANT KOOLERS · HCV 1500-PR
 🔒 Subscribe
MITSUI SEIKI HU50A MITSUI SEIKI HU50A
MITSUI SEIKI HU50A CNC HORIZONTAL MACHINING CENTER, FANUC SERIES 15-M CNC CONTROL, TRAVELS: X-28.34", Y-27.55", Z-25.6" TABLE TO SPINDLE RANGE: 3.93"-31.49", 2APC AUTOMATIC PALLET CHANGER, (2) 19.7" X 19.7" PALLETS, 60-STATION AUTOMATIC TOOL CHANGER, 50 TAPER SPINDLE
MITSUI SEIKI · HU50A
 🔒 Subscribe
AUTOMATED FINISHING PW-24-S AUTOMATED FINISHING PW-24-S
AUTOMATED FINISHING PW-24-S PARTS WASHER, APPROX. 18" WIDE BELT PARTS CONVEYOR, APPROX 10" X 18" PARTS WINDOW, TIMER, AFS INDUSTRIAL AIR CLEANER, OIL SKIMMER, PROCESS TIMER, S/N 1982
AUTOMATED FINISHING · PW-24-S
 🔒 Subscribe
MAYFRAN CONSEP 2000 MAYFRAN CONSEP 2000
MAYFRAN CONSEP 2000 CHIP CONVEYOR WITH COOLANT TANK & PUMPS P51.04M6658.01, 90" X 34" COLLECTION AREA, 17' SPAN BEFORE NECK, 20" HEIGHT ALONG SPAN, 60" DISCHARGE HEIGHT, APPROX 25' LENGTH
MAYFRAN CONSEP · 2000
 🔒 Subscribe
MAYFRAN CONSEP 2000 MAYFRAN CONSEP 2000
MAYFRAN CONSEP 2000 CHIP CONVEYOR WITH COOLANT TANK & PUMPS P51.04M6658.01, 90" X 34" COLLECTION AREA, 17' SPAN BEFORE NECK, 20" HEIGHT ALONG SPAN, 60" DISCHARGE HEIGHT, APPROX 25' LENGTH
MAYFRAN CONSEP · 2000
 🔒 Subscribe
KOOLANT KOOLERS HCV 1500-PR KOOLANT KOOLERS HCV 1500-PR
KOOLANT KOOLERS HCV 1500-PR CHILLER COMPRESSOR
KOOLANT KOOLERS · HCV 1500-PR
 🔒 Subscribe
Year Make Model Description Price
RAVENSBURG 100" X 254" RAVENSBURG 100" X 254" MANUAL LATHE WITH CRANE ROPE DRUM THREADING, 84" O/C, 63" 4-JAW CHUCK, 240 RPM, CRANE ROPE THREADING, COPY DEVICE, 19.8 TON CAPACITY 🔒 Subscribe
2007 MAKINO A71 2007 MAKINO A71 HORIZONTAL MACHINING CENTER, 19.7 X 19.7 TABLES, X-AXIS TRAVEL: 28.7, Y-AXIS TRAVEL: 28.7, Z-AXIS TRAVEL: 31.5, 60 ATC, CAT 50 SPINDLE TAPER, PROFESSIONAL 5 CNC CONTROL, COOLANT TANK, CHIP CONVEYOR, CHIP BLASTER S/N: 439 🔒 Subscribe
2004 MAKINO A71 2004 MAKINO A71 HORIZONTAL MACHINING CENTER, 19.7 X 19.7 TABLES, X-AXIS TRAVEL: 28.7, Y-AXIS TRAVEL: 28.7, Z-AXIS TRAVEL: 31.5, 60 ATC, CAT 50 SPINDLE TAPER, PROFESSIONAL 3 CNC CONTROL, COOLANT TANK, CHIP CONVEYOR, CHIP BLASTER 🔒 Subscribe
HARDINGE QUEST 8/51 HARDINGE QUEST 8/51 CNC LATHE WITH LIVE MILLING, 20.4" SWING, 12.1" MAX. TURNING DIAMETER, 7.4" X-AXIS TRAVEL, 24" Z-AXIS TRAVEL, 2.3" SPINDLE THRU-HOLE, 12-STATION TURRET, C-AXIS, LIVE MILLING, 80-8,000 RPM SPINDLE SPEEDS, FANUC 18I-T CNC CONTROL, LNS QL-SERVO S3 MAGAZINE BAR FEED, S/N QC-556 🔒 Subscribe
2003 HESS-MAE M-AH-40RH-750 2003 HESS-MAE M-AH-40RH-750 AUTOMATIC SHAFT STRAIGHTENING PRESS, 40-TON STRAIGHTENING FORCE, 29.5 MAX. WIDTH BETWEEN CENTERS, INFEED AND EXIT CONVEYOR, ALLEN BRADLEY PANELVIEW 600 OPERATOR INTERFACE, S/N WO-4966 🔒 Subscribe
1999 HARDINGE CONQUEST 51 1999 HARDINGE CONQUEST 51 HARDINGE CONQUEST 51 CNC LATHE WITH LIVE MILLING, MODEL CS-51, 26" SWING OVER WAYS, 6.75" X-AXIS TRAVEL, 22.87" Z- AXIS TRAVEL, 630 IPM RAPID TRAVERSE X & Y AXES, 4200 RPM SPINDLE SPEEDS, 6.5" COLLET CHUCK, 12-POSITION TURRET WITH 6-LIVE STATIONS, SUB-SPINDLE, CHIP CONVEYOR, FANUC 18-T CNC CONTROL, S/N CL-852-BC 🔒 Subscribe
1999 HARDINGE CONQUEST 51 1999 HARDINGE CONQUEST 51 CNC LATHE WITH LIVE MILLING, 26" SWING OVER WAYS, 6.75" X-AXIS TRAVEL, 22.87" Z- AXIS TRAVEL, 630 IPM RAPID TRAVERSE X & Y AXES, 4200 RPM SPINDLE SPEEDS, 6.5" COLLET CHUCK, 12-POSITION TURRET WITH 6-LIVE STATIONS, SUB-SPINDLE, CHIP CONVEYOR, FANUC 18-T CNC CONTROL, S/N CL-931-BC 🔒 Subscribe
2001 TRAUB TNC 42-65 DGY 2001 TRAUB TNC 42-65 DGY CNC LATHE, MAIN AND SUB SPINDLES, UPPER AND LOWER TURRETS, CHIP CONVEYOR, EQUIPPED WITH TRAUB TX 8H CNC CONTROL, S/N 887 🔒 Subscribe
1999 TRAUB TNC 42/65 DGY 1999 TRAUB TNC 42/65 DGY CNC LATHE, MAIN AND SUB SPINDLES, UPPER AND LOWER TURRETS, CHIP CONVEYOR, EQUIPPED WITH TRAUB TX 8F CNC CONTROL, S/N 739 🔒 Subscribe
2001 TRAUB TNC 42-65 2001 TRAUB TNC 42-65 CNC LATHE, MAX TURNING LENGTH 17.71", DIAMETER IN FRONT BEARING 4.33", X AXIS SLIDES S1 AND S2 FEED TRAVEL 5.51", Z AXIS SLIDES S1 AND S2 17.71", TOOL CARRIER POSITIONS, W1 AND W2 14 (10) / 10 (14), MAIN & OPPOSED SPINDLE SPEEDS 5600/4000 RPM, C-AXIS ON MAIN SPINDLE, EQUIPPED WITH TRAUB SYSTEM TX 8H CNC CONTROL, CHIP CONVEYOR, S/N 904 🔒 Subscribe
LNS BAR FEED LNS BAR FEED 🔒 Subscribe
2004 PRAWEMA SYNCHROFINE HFSL203W 2004 PRAWEMA SYNCHROFINE HFSL203W HIGH PERFORMANCE CNC GEAR HONING MACHINE, 40-160MM WORKPIECE DIAMETER CAPACITY, 55MM MAX TEETH WIDTH, 200MM MAX SHAFT LENGTH, 0-1500 MIN-1 TOOL REVOLUTION, 0-6500 MIN-1 WORKPIECE SPINDLE, 1500 DAN MAX WORKPIECE CLAMPING, 1055MM X-TRAVEL, 300MM Z-TRAVEL, -10 +8 DEGREE HONING HEAD SWIVEL ANGLE, 0.01MM SMALLEST TRAVEL VALUE, 460/3/60 ELECTRICS, S/N 037 059 🔒 Subscribe
1997 TRAUB TNC42/65DGY 1997 TRAUB TNC42/65DGY CNC LATHE, MAIN AND SUB SPINDLES, UPPER AND LOWER TURRETS, CHIP CONVEYOR, EQUIPPED WITH TRAUB TX 8F CNC CONTROL, S/N 555 🔒 Subscribe
1995 TRAUB TNC 42/65 DGY 1995 TRAUB TNC 42/65 DGY CNC LATHE, MAIN AND SUB SPINDLES, UPPER AND LOWER TURRETS, REAR EXIT CHIP CONVEYOR, EQUIPPED WITH TRAUB TX 8F CNC CONTROL S/N 323 🔒 Subscribe
1996 TRAUB TNC 42-65 1996 TRAUB TNC 42-65 CNC LATHE, MAX TURNING LENGTH 17.71", DIAMETER IN FRONT BEARING 4.33", X AXIS SLIDES S1 AND S2 FEED TRAVEL 5.51", Z AXIS SLIDES S1 AND S2 17.71", TOOL CARRIER POSITIONS, W1 AND W2 14 (10) / 10 (14), MAIN & OPPOSED SPINDLE SPEEDS 5600/4000 RPM, C-AXIS ON MAIN SPINDLE, EQUIPPED WITH TRAUB SYSTEM TX 8F CNC CONTROL, CHIP CONVEYOR, S/N 472 🔒 Subscribe
OKUMA LFS10-2SP OKUMA LFS10-2SP TWIN-SPINDLE TWIN-TURRET CNC TURNING CENTER, 15.7" SWING OVER BED, 4.72" MAX TURNING DIAMETER, 3.14" MAX TURNING LENGTH, 1.57" BAR DIAMETER, 5.11" X-TRAVEL, 5.70" Z-TRAVEL, 50-6000 RPM SPINDLE SPEED, (2) 8-STATION FRONT-FACING TURRETS, OSP-U100L CNC CONTROLS, 220/480/3/60 ELECTRICS, S/N 0122 🔒 Subscribe
OKUMA LFS10-2SP OKUMA LFS10-2SP TWIN-SPINDLE TWIN-TURRET CNC TURNING CENTER, 15.7" SWING OVER BED, 4.72" MAX TURNING DIAMETER, 3.14" MAX TURNING LENGTH, 1.57" BAR DIAMETER, 5.11" X-TRAVEL, 5.70" Z-TRAVEL, 50-6000 RPM SPINDLE SPEED, (2) 8-STATION FRONT-FACING TURRETS, OSP-U100L CNC CONTROLS, 220/480/3/60 ELECTRICS, S/N 0225 🔒 Subscribe
1995 TRAUB TNC 42/65 DGY 1995 TRAUB TNC 42/65 DGY CNC LATHE S/N: 303 TRAUB TX 8F CNC CONTROL, S/N 303 🔒 Subscribe
NORDSON NVC-4 NORDSON NVC-4 PAINT BOOTH, 60" X 60" X 60" INTERIOR CABINET, 3 HP MOTOR, 230/460V 🔒 Subscribe
AUTOMATED FINISHING 2V5 AUTOMATED FINISHING 2V5 VIBRATORY FINISHING MACHINE, 36" X 12" X 16" 4-SECTION VIBRATORY CHAMBER, PNEUMATIC ACTUATED DOOR, CONTROL PANEL WITH OMRON H5CX PROCESS TIMER, 480/3/60 ELECTRICS 🔒 Subscribe
SHIELDED DRIVE ISOLATION TRANSFORMER 27 KVA 🔒 Subscribe
AUTOMATED FINISHING 4078 AUTOMATED FINISHING 4078 AUTOMATIC CONVEYOR PARTS WASHER, 11" CONVEYOR WIDTH, APPROX 14"X 8" PARTS WINDOW, WASH AND BLOW-OFF CYCLES, WASH TANK WITH WATLOW ELECTRIC TANK HEATERS, ALLEN BRADLEY PANELVIEW PLUS 600 INTERFACE, 480/3/60 ELECTRICS 🔒 Subscribe
AUTOMATED FINISHING 3905 AUTOMATED FINISHING 3905 PARTS WASHER, 25 "X 15" PARTS TRAY LOADER, 30" X 18" DOORWAY, PNEUMATIC ACTUATED DOOR, WASH TANK WITH WATLOW ELECTRIC TANK HEATERS, PLC CONTROL CABINET WITH ALLEN BRADLEY PANELVIEW 600 INTERFACE, 480/3/60 ELECTRICS 🔒 Subscribe
1997 CINCINNATI AVENGER 250S 1997 CINCINNATI AVENGER 250S CNC SLANT BED TURNING CENTER WITH LIVE MILLING, BAR FEED, 12-POSITION TURRET, SUB-SPINDLE, ACRAMATIC 850SX CNC CONTROL, JORGENSEN CHIP CONVEYOR, 460/3/60 ELECTRICS, S/N 3650B0597-0012. EQUIPPED WITH LNS QL SERVO S2 AUTO BAR FEEDER S/N 301388 WITH CONTROL PENDANT 🔒 Subscribe
MINSTER E2-1000-144 HEVI-STAMPER MINSTER E2-1000-144 HEVI-STAMPER TWO POINT ECCENTRIC SHAFT, PROGRESSIVE DIE PRESS, 1000 TON, 144 X 60 BED AND SLIDE AREA, 8 STROKE, 6 SLIDE ADJUSTMENT, 27 SHUT HEIGHT OVER BOLSTER, 9 THICK T-SLOTTED BOLSTER, 0-50 STROKES PER MINUTE, HYD. CLUTCH AND BRAKE, 150 HP MOTOR, POWER DIE CHANGER, S/N: 29820 🔒 Subscribe
2000 DEHOFF/ KAYS ENGINEERING 518T 2000 DEHOFF/ KAYS ENGINEERING 518T GUN DRILLING MACHINE, 1/2" DIAMETER MILD STEEL DRILL CAPACITY, (2) DRILL HEADS, (4) SPINDLES, 18" DRILL STROKE, 0.1-30.0 IPM FEED RATE, 1000-8000 RPM SPINDLE SPEED, 3 HP SPINDLE, KAYS ENGINEERING 9-2402-001, 15" MAGNETIC CHIP CONVEYOR, 300 GAL5 HP HYDRAULIC POWER UNIT, ALLEN BRADLEY PANELVIEW 1000 INTERFACE, ALLEN BRADLEY SLC 504 PLCS, 460/3/60 ELECTRICS, S/N DH-1936 🔒 Subscribe
2003 COLE-TUV CF-110 2003 COLE-TUV CF-110 C-FRAME HYDRAULIC PRESS, 110 TON CAPACITY, .25"-11.8" ADJUSTABLE STROKE, 7.88" MAX SHUT HEIGHT, 19.6" DAYLIGHT (MAX OPENING), 10.2" THROAT DEPTH, 23.5" X 42.5" TABLE, DUAL PALM CONTROL, VARIABLE SPEED, 440/3/60 ELECTRICS, S/N CF/SB-1-22003 [RAM REBUILT IN 2019] 🔒 Subscribe
2000 JUNKER JUMAT 5002/50 2000 JUNKER JUMAT 5002/50 CNC CYLINDRICAL GRINDER - JUNKER JUMAT 5002/50 CBN CNC SHAFT GRINDING MACHINE, FANUC SERIES 16 CNC CONTROL, AUTOMATIC LOADING CHAIN CYCLE CONVEYOR, (2) HF SPINDLE UNITS, B-AXIS, MARPOSS GAUGING, OBERLIN SUMP TANK, S/N 1798 🔒 Subscribe
2000 JUNKER JUMAT 5002/50 2000 JUNKER JUMAT 5002/50 CNC CYLINDRICAL GRINDER - JUNKER JUMAT 5002/50 CBN CNC SHAFT GRINDING MACHINE, FANUC SERIES 16 CNC CONTROL, AUTOMATIC LOADING CHAIN CYCLE CONVEYOR, (2) HF SPINDLE UNITS, B-AXIS, MARPOSS GAUGING, OBERLIN SUMP TANK, S/N 1982 🔒 Subscribe
2003 EMAG REINECKER VSC-250-DDS 2003 EMAG REINECKER VSC-250-DDS CNC VERTICAL HARD TURNING AND FINISH GRINDING MACHINE, 9.84" MAX CHUCK DIAMETER, 10.23" MAX SWING, 3.46" X-TRAVEL, 7.87" Z-TRAVEL, 12.40" Y-TRAVE, 12-STATION TURRET, EQUIPPED WITH SIEMENS SINUMERIK CNC CONTROLS, 460/3/60 ELECTRICS, S/N M762.56847 🔒 Subscribe
BROTHER TC-321 BROTHER TC-321 CNC DRILLING & TAPPING CENTER, TRAVELS: X-27.55", Y-11.81", Z-9.84", 31.49" X 11.81" T-SLOTTED TABLE, 10-POSITION TOOL TURRET, 6-6000 RPM SPINDLE SPEEDS, BT30 SPINDLE TAPER, BROTHER CNC CONTROL, 230/3/60 ELECTRICS, S/N 112126 🔒 Subscribe
2003 EMAG REINECKER VSC-250-DDS 2003 EMAG REINECKER VSC-250-DDS CNC VERTICAL HARD TURNING AND FINISH GRINDING MACHINE, 9.84" MAX CHUCK DIAMETER, 10.23" MAX SWING, 3.46" X-TRAVEL, 7.87" Z-TRAVEL, 12.40" Y-TRAVE, 12-STATION TURRET, EQUIPPED WITH SIEMENS SINUMERIK CNC CONTROLS, 460/3/60 ELECTRICS, S/N M762.56845 🔒 Subscribe
1991 ANDERSON COOK 350 1991 ANDERSON COOK 350 HYDRAULIC COLD ROLL SPLINE ROLLER, 56" STROKE, 48" MAX RACK LENGTH, 4.75" MAX RACK FACE WIDTH, 2.5" MAX PART DIAMETER, 16/32" MAX PITCH FORM, 1.587/0.794" MAX MODULE FORM, 30/44" MAX PART LENGTH, EQUIPPED WITH LIVE CENTER HEADSTOCK AND TAILSTOCK, 480/3/60 ELECTRICS, S/N 261 🔒 Subscribe
SUNNEN KGM-5000NTE-S3 SUNNEN KGM-5000NTE-S3 HORIZONTAL CNC HONING MACHINE, 0.31-5.90" WORKPIECE CAPACITY, 4.4 LB MAX WORKPIECE WEIGHT, 250-3700 RPM/20-1000RPM SPINDLE SPEED, 33-500 SPM, KGM CNC CONTROLS, 460/3/60 ELECTRICS, S/N 4D1-1055 🔒 Subscribe
2019 LNS QLS80 S2 2019 LNS QLS80 S2 QUICK LOAD SERVO BARFEEDER, 1/4" TO 3-1/8" BAR DIAMETER, 14" TO 63" LENGTH CAPACITY, S/N 27325401 🔒 Subscribe
1999 HARDINGE CONQUEST 51 1999 HARDINGE CONQUEST 51 CNC LATHE WITH LIVE MILLING, 26" SWING OVER WAYS, 6.75" X-AXIS TRAVEL, 22.87" Z- AXIS TRAVEL, 630 IPM RAPID TRAVERSE X & Y AXES, 4200 RPM SPINDLE SPEEDS, 6.5" COLLET CHUCK, 12-POSITION TURRET WITH 6-LIVE STATIONS, SUB-SPINDLE, CHIP CONVEYOR, FANUC 18-T CNC CONTROL, S/N CL-554-BC 🔒 Subscribe
2001 MORI SEIKI SL303A/700 2001 MORI SEIKI SL303A/700 CNC TURNING CENTER, S/N: 871 MORI SEIKI SL303A/700 CNC LATHE, MORI-MSG501 CNC CONTROLS, MAYFRAN CONSEP 2000 CHIP CONVEYOR, S/N: 871 🔒 Subscribe
2001 MORI SEIKI SL303A/700 2001 MORI SEIKI SL303A/700 CNC TURNING CENTER, EQUIPPED WITH MSG501 CNC CONTROLS, MAYFRAN CONSEP 2000 CHIP CONVEYOR/ COOLANT RESERVOIR TANK, S/N87 🔒 Subscribe
2008 GLOBAL FINISHING SOLUTIONS 2008 GLOBAL FINISHING SOLUTIONS INDUSTRIAL SPRAY BOOTH, 104" X 60" X 120" H 🔒 Subscribe
ABB IRB 3000 ABB IRB 3000 GENERAL PURPOSE ROBOT, 66LB - 30K LOAD CAPACITY, 78" REACH, 6 AXIS, CONTROL 🔒 Subscribe
2001 CAE RANSOHOFF 4066 2001 CAE RANSOHOFF 4066 3-STAGE AUTOMATIC CONVEYOR PARTS WASHER, 80 PALLETS PER HOUR, 0.5-5 FPM CONVEYOR SPEED, 2060 CHAIN CONVEYOR TYPE, 13" X 10" PARTS WINDOW, WASH STATION WITH 400 GAL TANK, WATLOW 100W ELECTRIC TANK HEATER, 160F WASH TEMP, RINSE STATION WITH 210 GALLON TANK, WATLOW 100W ELECTRIC TANK HEATER, 140F RINSE TEMP, EXHAUST FAN, HOT AIR BLOW-OFF STATION WITH BLOWER MOTOR AND GAS BURNER,ALLEN BRADLEY PANELVIEW 600 INTERFACE, 460V/3PH, S/N 4066 🔒 Subscribe
MATTISON TYPE 100C MATTISON TYPE 100C 5-SPINDLE ROTARY SURFACE GRINDER, 100" TABLE DIAMETER, (5) 40 HP SPINDLES, 16" RANGE OF WORK WITH FIXTURES, 20" WHEEL DIAMETER, EQUIPPED WITH AUTOMATIC SIZER, WHEEL DRESSER, ROTARY PARTS TABLE, TORIT DRYFLO MIST COLLECTOR, AUTO LUBRICATION, 460/3/60 ELECTRICS, S/N 100C-56 🔒 Subscribe
KOOLANT KOOLERS HCV 1500-PR KOOLANT KOOLERS HCV 1500-PR CHILLER COMPRESSOR 🔒 Subscribe
MITSUI SEIKI HU50A MITSUI SEIKI HU50A CNC HORIZONTAL MACHINING CENTER, FANUC SERIES 15-M CNC CONTROL, TRAVELS: X-28.34", Y-27.55", Z-25.6" TABLE TO SPINDLE RANGE: 3.93"-31.49", 2APC AUTOMATIC PALLET CHANGER, (2) 19.7" X 19.7" PALLETS, 60-STATION AUTOMATIC TOOL CHANGER, 50 TAPER SPINDLE 🔒 Subscribe
AUTOMATED FINISHING PW-24-S AUTOMATED FINISHING PW-24-S PARTS WASHER, APPROX. 18" WIDE BELT PARTS CONVEYOR, APPROX 10" X 18" PARTS WINDOW, TIMER, AFS INDUSTRIAL AIR CLEANER, OIL SKIMMER, PROCESS TIMER, S/N 1982 🔒 Subscribe
MAYFRAN CONSEP 2000 MAYFRAN CONSEP 2000 CHIP CONVEYOR WITH COOLANT TANK & PUMPS P51.04M6658.01, 90" X 34" COLLECTION AREA, 17' SPAN BEFORE NECK, 20" HEIGHT ALONG SPAN, 60" DISCHARGE HEIGHT, APPROX 25' LENGTH 🔒 Subscribe
MAYFRAN CONSEP 2000 MAYFRAN CONSEP 2000 CHIP CONVEYOR WITH COOLANT TANK & PUMPS P51.04M6658.01, 90" X 34" COLLECTION AREA, 17' SPAN BEFORE NECK, 20" HEIGHT ALONG SPAN, 60" DISCHARGE HEIGHT, APPROX 25' LENGTH 🔒 Subscribe
KOOLANT KOOLERS HCV 1500-PR KOOLANT KOOLERS HCV 1500-PR CHILLER COMPRESSOR 🔒 Subscribe
RAVENSBURG 100" X 254" photo
RAVENSBURG 100" X 254"
METALWORKING & FABRICATION EQUIPMENT
RAVENSBURG 100" X 254" MANUAL LATHE WITH CRANE ROPE DRUM THREADING, 84" O/C, 63" 4-JAW CHUCK, 240 RP...
Hammer Price: 🔒
2007 MAKINO A71 photo
2007 MAKINO A71
CNC MACHINE CENTERS
2007 MAKINO A71 HORIZONTAL MACHINING CENTER, 19.7 X 19.7 TABLES, X-AXIS TRAVEL: 28.7, Y-AXIS TRAVEL:...
Hammer Price: 🔒
2004 MAKINO A71 photo
2004 MAKINO A71
CNC MACHINE CENTERS
2004 MAKINO A71 HORIZONTAL MACHINING CENTER, 19.7 X 19.7 TABLES, X-AXIS TRAVEL: 28.7, Y-AXIS TRAVEL:...
Hammer Price: 🔒
HARDINGE QUEST 8/51 photo
HARDINGE QUEST 8/51
CNC MACHINE CENTERS
HARDINGE QUEST 8/51 CNC LATHE WITH LIVE MILLING, 20.4" SWING, 12.1" MAX. TURNING DIAMETER, 7.4" X-AX...
Hammer Price: 🔒
2003 HESS-MAE M-AH-40RH-750 photo
2003 HESS-MAE M-AH-40RH-750
PRESSES & FORMING
2003 HESS-MAE M-AH-40RH-750 AUTOMATIC SHAFT STRAIGHTENING PRESS, 40-TON STRAIGHTENING FORCE, 29.5 MA...
Hammer Price: 🔒
1999 HARDINGE CONQUEST 51 photo
1999 HARDINGE CONQUEST 51
CNC MACHINE CENTERS
1999 HARDINGE CONQUEST 51 HARDINGE CONQUEST 51 CNC LATHE WITH LIVE MILLING, MODEL CS-51, 26" SWING O...
Hammer Price: 🔒
1999 HARDINGE CONQUEST 51 photo
1999 HARDINGE CONQUEST 51
CNC MACHINE CENTERS
1999 HARDINGE CONQUEST 51 CNC LATHE WITH LIVE MILLING, 26" SWING OVER WAYS, 6.75" X-AXIS TRAVEL, 22....
Hammer Price: 🔒
2001 TRAUB TNC 42-65 DGY photo
2001 TRAUB TNC 42-65 DGY
CNC MACHINE CENTERS
2001 TRAUB TNC 42-65 DGY CNC LATHE, MAIN AND SUB SPINDLES, UPPER AND LOWER TURRETS, CHIP CONVEYOR, E...
Hammer Price: 🔒
1999 TRAUB TNC 42/65 DGY photo
1999 TRAUB TNC 42/65 DGY
CNC MACHINE CENTERS
1999 TRAUB TNC 42/65 DGY CNC LATHE, MAIN AND SUB SPINDLES, UPPER AND LOWER TURRETS, CHIP CONVEYOR, E...
Hammer Price: 🔒
2001 TRAUB TNC 42-65 photo
2001 TRAUB TNC 42-65
CNC MACHINE CENTERS
2001 TRAUB TNC 42-65 CNC LATHE, MAX TURNING LENGTH 17.71", DIAMETER IN FRONT BEARING 4.33", X AXIS S...
Hammer Price: 🔒
LNS BAR FEED photo
LNS BAR FEED
METALWORKING & FABRICATION EQUIPMENT
LNS BAR FEED...
Hammer Price: 🔒
2004 PRAWEMA SYNCHROFINE HFSL203W photo
2004 PRAWEMA SYNCHROFINE HFSL203W
CNC MACHINE CENTERS
2004 PRAWEMA SYNCHROFINE HFSL203W HIGH PERFORMANCE CNC GEAR HONING MACHINE, 40-160MM WORKPIECE DIAME...
Hammer Price: 🔒
1997 TRAUB TNC42/65DGY photo
1997 TRAUB TNC42/65DGY
CNC MACHINE CENTERS
1997 TRAUB TNC42/65DGY CNC LATHE, MAIN AND SUB SPINDLES, UPPER AND LOWER TURRETS, CHIP CONVEYOR, EQU...
Hammer Price: 🔒
1995 TRAUB TNC 42/65 DGY photo
1995 TRAUB TNC 42/65 DGY
CNC MACHINE CENTERS
1995 TRAUB TNC 42/65 DGY CNC LATHE, MAIN AND SUB SPINDLES, UPPER AND LOWER TURRETS, REAR EXIT CHIP C...
Hammer Price: 🔒
1996 TRAUB TNC 42-65 photo
1996 TRAUB TNC 42-65
CNC MACHINE CENTERS
1996 TRAUB TNC 42-65 CNC LATHE, MAX TURNING LENGTH 17.71", DIAMETER IN FRONT BEARING 4.33", X AXIS S...
Hammer Price: 🔒
OKUMA LFS10-2SP photo
OKUMA LFS10-2SP
CNC MACHINE CENTERS
OKUMA LFS10-2SP TWIN-SPINDLE TWIN-TURRET CNC TURNING CENTER, 15.7" SWING OVER BED, 4.72" MAX TURNING...
Hammer Price: 🔒
OKUMA LFS10-2SP photo
OKUMA LFS10-2SP
CNC MACHINE CENTERS
OKUMA LFS10-2SP TWIN-SPINDLE TWIN-TURRET CNC TURNING CENTER, 15.7" SWING OVER BED, 4.72" MAX TURNING...
Hammer Price: 🔒
1995 TRAUB TNC 42/65 DGY photo
1995 TRAUB TNC 42/65 DGY
CNC MACHINE CENTERS
1995 TRAUB TNC 42/65 DGY CNC LATHE S/N: 303 TRAUB TX 8F CNC CONTROL, S/N 303...
Hammer Price: 🔒
NORDSON NVC-4 photo
NORDSON NVC-4
MISC
NORDSON NVC-4 PAINT BOOTH, 60" X 60" X 60" INTERIOR CABINET, 3 HP MOTOR, 230/460V...
Hammer Price: 🔒
AUTOMATED FINISHING 2V5 photo
AUTOMATED FINISHING 2V5
SURFACE FINISHING EQUIPMENT
AUTOMATED FINISHING 2V5 VIBRATORY FINISHING MACHINE, 36" X 12" X 16" 4-SECTION VIBRATORY CHAMBER, PN...
Hammer Price: 🔒
Equipment photo
ELECTRICAL AND POWER GENERATION EQUIPMENT
SHIELDED DRIVE ISOLATION TRANSFORMER 27 KVA...
Hammer Price: 🔒
AUTOMATED FINISHING 4078 photo
AUTOMATED FINISHING 4078
SURFACE FINISHING EQUIPMENT
AUTOMATED FINISHING 4078 AUTOMATIC CONVEYOR PARTS WASHER, 11" CONVEYOR WIDTH, APPROX 14"X 8" PARTS W...
Hammer Price: 🔒
AUTOMATED FINISHING 3905 photo
AUTOMATED FINISHING 3905
SURFACE FINISHING EQUIPMENT
AUTOMATED FINISHING 3905 PARTS WASHER, 25 "X 15" PARTS TRAY LOADER, 30" X 18" DOORWAY, PNEUMATIC ACT...
Hammer Price: 🔒
1997 CINCINNATI AVENGER 250S photo
1997 CINCINNATI AVENGER 250S
CNC MACHINE CENTERS
1997 CINCINNATI AVENGER 250S CNC SLANT BED TURNING CENTER WITH LIVE MILLING, BAR FEED, 12-POSITION T...
Hammer Price: 🔒
MINSTER E2-1000-144 HEVI-STAMPER photo
MINSTER E2-1000-144 HEVI-STAMPER
PRESSES & FORMING
MINSTER E2-1000-144 HEVI-STAMPER TWO POINT ECCENTRIC SHAFT, PROGRESSIVE DIE PRESS, 1000 TON, 144 X ...
Hammer Price: 🔒
2000 DEHOFF/ KAYS ENGINEERING 518T photo
2000 DEHOFF/ KAYS ENGINEERING 518T
METALWORKING & FABRICATION EQUIPMENT
2000 DEHOFF/ KAYS ENGINEERING 518T GUN DRILLING MACHINE, 1/2" DIAMETER MILD STEEL DRILL CAPACITY, (2...
Hammer Price: 🔒
2003 COLE-TUV CF-110 photo
2003 COLE-TUV CF-110
PRESSES & FORMING
2003 COLE-TUV CF-110 C-FRAME HYDRAULIC PRESS, 110 TON CAPACITY, .25"-11.8" ADJUSTABLE STROKE, 7.88" ...
Hammer Price: 🔒
2000 JUNKER JUMAT 5002/50 photo
2000 JUNKER JUMAT 5002/50
CNC MACHINE CENTERS
2000 JUNKER JUMAT 5002/50 CNC CYLINDRICAL GRINDER - JUNKER JUMAT 5002/50 CBN CNC SHAFT GRINDING MACH...
Hammer Price: 🔒
2000 JUNKER JUMAT 5002/50 photo
2000 JUNKER JUMAT 5002/50
CNC MACHINE CENTERS
2000 JUNKER JUMAT 5002/50 CNC CYLINDRICAL GRINDER - JUNKER JUMAT 5002/50 CBN CNC SHAFT GRINDING MACH...
Hammer Price: 🔒
2003 EMAG REINECKER VSC-250-DDS photo
2003 EMAG REINECKER VSC-250-DDS
CNC MACHINE CENTERS
2003 EMAG REINECKER VSC-250-DDS CNC VERTICAL HARD TURNING AND FINISH GRINDING MACHINE, 9.84" MAX CHU...
Hammer Price: 🔒
BROTHER TC-321 photo
BROTHER TC-321
CNC MACHINE CENTERS
BROTHER TC-321 CNC DRILLING & TAPPING CENTER, TRAVELS: X-27.55", Y-11.81", Z-9.84", 31.49" X 11.81" ...
Hammer Price: 🔒
2003 EMAG REINECKER VSC-250-DDS photo
2003 EMAG REINECKER VSC-250-DDS
CNC MACHINE CENTERS
2003 EMAG REINECKER VSC-250-DDS CNC VERTICAL HARD TURNING AND FINISH GRINDING MACHINE, 9.84" MAX CHU...
Hammer Price: 🔒
1991 ANDERSON COOK 350 photo
1991 ANDERSON COOK 350
METALWORKING & FABRICATION EQUIPMENT
1991 ANDERSON COOK 350 HYDRAULIC COLD ROLL SPLINE ROLLER, 56" STROKE, 48" MAX RACK LENGTH, 4.75" MAX...
Hammer Price: 🔒
SUNNEN KGM-5000NTE-S3 photo
SUNNEN KGM-5000NTE-S3
CNC MACHINE CENTERS
SUNNEN KGM-5000NTE-S3 HORIZONTAL CNC HONING MACHINE, 0.31-5.90" WORKPIECE CAPACITY, 4.4 LB MAX WORKP...
Hammer Price: 🔒
2019 LNS QLS80 S2 photo
2019 LNS QLS80 S2
METALWORKING & FABRICATION EQUIPMENT
2019 LNS QLS80 S2 QUICK LOAD SERVO BARFEEDER, 1/4" TO 3-1/8" BAR DIAMETER, 14" TO 63" LENGTH CAPACIT...
Hammer Price: 🔒
1999 HARDINGE CONQUEST 51 photo
1999 HARDINGE CONQUEST 51
CNC MACHINE CENTERS
1999 HARDINGE CONQUEST 51 CNC LATHE WITH LIVE MILLING, 26" SWING OVER WAYS, 6.75" X-AXIS TRAVEL, 22....
Hammer Price: 🔒
2001 MORI SEIKI SL303A/700 photo
2001 MORI SEIKI SL303A/700
CNC MACHINE CENTERS
2001 MORI SEIKI SL303A/700 CNC TURNING CENTER, S/N: 871 MORI SEIKI SL303A/700 CNC LATHE, MORI-MSG501...
Hammer Price: 🔒
2001 MORI SEIKI SL303A/700 photo
2001 MORI SEIKI SL303A/700
CNC MACHINE CENTERS
2001 MORI SEIKI SL303A/700 CNC TURNING CENTER, EQUIPPED WITH MSG501 CNC CONTROLS, MAYFRAN CONSEP 200...
Hammer Price: 🔒
2008 GLOBAL FINISHING SOLUTIONS photo
2008 GLOBAL FINISHING SOLUTIONS
MISC
2008 GLOBAL FINISHING SOLUTIONS INDUSTRIAL SPRAY BOOTH, 104" X 60" X 120" H...
Hammer Price: 🔒
ABB IRB 3000 photo
ABB IRB 3000
INDUSTRIAL AUTOMATION, CONTROLS & ROBOTICS
ABB IRB 3000 GENERAL PURPOSE ROBOT, 66LB - 30K LOAD CAPACITY, 78" REACH, 6 AXIS, CONTROL...
Hammer Price: 🔒
2001 CAE RANSOHOFF 4066 photo
2001 CAE RANSOHOFF 4066
MISC
2001 CAE RANSOHOFF 4066 3-STAGE AUTOMATIC CONVEYOR PARTS WASHER, 80 PALLETS PER HOUR, 0.5-5 FPM CONV...
Hammer Price: 🔒
MATTISON TYPE 100C photo
MATTISON TYPE 100C
METALWORKING & FABRICATION EQUIPMENT
MATTISON TYPE 100C 5-SPINDLE ROTARY SURFACE GRINDER, 100" TABLE DIAMETER, (5) 40 HP SPINDLES, 16" RA...
Hammer Price: 🔒
KOOLANT KOOLERS HCV 1500-PR photo
KOOLANT KOOLERS HCV 1500-PR
REFRIGERATION EQUIPMENT
KOOLANT KOOLERS HCV 1500-PR CHILLER COMPRESSOR...
Hammer Price: 🔒
MITSUI SEIKI HU50A photo
MITSUI SEIKI HU50A
CNC MACHINE CENTERS
MITSUI SEIKI HU50A CNC HORIZONTAL MACHINING CENTER, FANUC SERIES 15-M CNC CONTROL, TRAVELS: X-28.34"...
Hammer Price: 🔒
AUTOMATED FINISHING PW-24-S photo
AUTOMATED FINISHING PW-24-S
SURFACE FINISHING EQUIPMENT
AUTOMATED FINISHING PW-24-S PARTS WASHER, APPROX. 18" WIDE BELT PARTS CONVEYOR, APPROX 10" X 18" PAR...
Hammer Price: 🔒
MAYFRAN CONSEP 2000 photo
MAYFRAN CONSEP 2000
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
MAYFRAN CONSEP 2000 CHIP CONVEYOR WITH COOLANT TANK & PUMPS P51.04M6658.01, 90" X 34" COLLECTION ARE...
Hammer Price: 🔒
MAYFRAN CONSEP 2000 photo
MAYFRAN CONSEP 2000
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
MAYFRAN CONSEP 2000 CHIP CONVEYOR WITH COOLANT TANK & PUMPS P51.04M6658.01, 90" X 34" COLLECTION ARE...
Hammer Price: 🔒
KOOLANT KOOLERS HCV 1500-PR photo
KOOLANT KOOLERS HCV 1500-PR
REFRIGERATION EQUIPMENT
KOOLANT KOOLERS HCV 1500-PR CHILLER COMPRESSOR...
Hammer Price: 🔒

Disclaimer: BidSeek aggregates publicly available auction and liquidation results from independent third-party sources for research and valuation reference only. BidSeek is not affiliated with, endorsed by, sponsored by, or operated in connection with any auction house, marketplace, or liquidation firm. All data and images are provided as-is for informational purposes and remain the property of their respective owners.