MidMonth MultiFacility CNC Fab No Reserve Auction

2009 SAMSUNG SL-20SY/500 CNC LATHE SWING: 17.72" DISTANCE BETWEEN CENTERS: 20.42" SPINDLE BORE: 3.1" SPINDLE SPEED: 4,000 RPM SPINDLE MOTOR: 30 HP SPINDLE NOSE: A2-6 TURRET CAPACITY: 12 STATION EQUIPPED WITH: SUBSPINDLE Y-AXIS CHIP CONVEYOR PARTS CATCHER TOOL PRESETTER BAR FEED APPROX. MACHINE DIMENSIONS: 162" X 65" X 75" APPROX. MACHINE WEIGHT: 9,000 LBS

BLANCHARD 22-42 GRINDING MACHINE RANGE: 48" DIAMETER X 11" HIGH OVER 42" CHUCK WORK TABLE: 42" ONE-PIECE STEEL MAGNETIC CHUCK WITH 5/8" POLE SPACING. CHUCK HAS 2" CENTER HOLE. WHEEL: 22" CORTLAND SEGMENT CHUCK POWER FEED VARIABLE FROM 0.004" TO 0.065" PER MINUTE

1996 WYSONG H-2510 HYDRAULIC SHEAR SHEARING CAPACITY, MILD STEEL 10' X 1/4" SHEARING CAPACITY, STAINLESS STEEL 10' X 7 GA THROAT DEPTH 3" RAKE ANGLE INCH PER FOOT 5/16" NUMBER OF HOLDDOWNS 11 HOLD DOWN TONNAGE, TOTAL 32 TONS STROKES PER MINUTE, FULL CAPACITY FULL LENGTH 21 SPM STROKES PER MINUTE, FULL CAPACITY SHORT STROKE 45 SPM STROKES PER MINUTE, REDUCED CAP FULL LENGTH 40 SPM STROKES PER MINUTE, REDUCED CAP SHORT STROKE 60 SPM MAIN MOTOR, HORSEPOWER 20 HP EQUIPPED WITH: WYSONG "PC100" 3-AXIS CNC CONTROL AUTOMATIC SWING-UP BACK GAUGE SHEET STACKER - SQUARING ARM BLADE GAP ADJUSTMENT (13) HYDRAULIC HOLD-DOWNS OVERALL DIMENSIONS: L X W 162" X 76" OVERALL HEIGHT 73" WEIGHT APPROXIMATELY 17000 LBS

1998 MORI SEIKI CL 200 CNC TURNING CENTER SWING OVER WAYS 20 SWING OVER CARRIAGE 16.1 DISTANCE BETWEEN CENTERS 14.6 HORSEPOWER(HP) 20 SPEED RANGE(RPMS) 3500 RPM TAILSTOCK YES STEADYREST NO CHUCK SIZE 8 CHUCK TYPE(3 JAW AND 4 JAW) 3 JAW TOOL POST INCLUDED YES TYPE 10 STATION TURRET SPINDLE BORE/THRU HOLE DIAMETER 2.9 THREADING YES EQUIPPED WITH: ADDITIONAL TOOLING/CHUCKS

2002 MAZAK QTN 100 CNC TURNING CENTER CONTROL: MAZATROL 640 BAR CAPACITY: 1.5 CHUCK SIZE: 6 SPINDLE SPEED: 6,000 RPM SPINDLE MOTOR: 15 HP X AXIS TRAVEL: 6.31 Z AXIS TRAVEL: 17.93 RAPID RATE Z AXIS: 1,180 IPM TURRET TOOLS: 12 STATION RAPID RATE X AXIS: 1,180 IPM MAX TURNING DIA: 9.06 MAX TURNING LENGTH: 18 MAX SWING: 17.13 TAIL STOCK: YES IT DOES NOT HAVE A CHIP CONVEYOR. THE MACHINE SPENT MOST OF ITS TIME TURNING BRASS AND ALUMINUM FROM 2 TO 3 DIAMETERS, AND TYPICALLY CUTTING.025.

TOS TRENCHIN NO. 276 ENGINE LATHE SWING: 15" DISTANCE BETWEEN CENTERS: 80" HP: 10 RPMS: 10-1000 EQUIPPED WITH: TAILSTOCK (3) STEADY RESTS 18" FACEPLATE 12" 4 JAW CHUCK UNIVERSAL 3-JAW CHUCK

2006 HARDINGE TALENT 6/45 CNC LATHE MAX SWING OVER BED: 18" MAX TURNING DIAMETER: 11.1" MAX TURNING LENGTH: 16" SPINDLE SPEED: 6000 RPM SPINDLE POWER: 17.5 HP SPINDLE NOSE: A2-5 MAX BAR CAPACITY: 1.77" TURRET CAPACITY: 12 STATIONS TURRET INDEX TIME: 0.73 SECONDS X-AXIS TRAVEL: 9" Z-AXIS TRAVEL: 16" RAPID TRAVERSE RATE (X/Z): 1,181 IPM EQUIPPED WITH: FANUC SV CONTROL 6" CHUCK 3-JAW CHIP CONVEYOR TAILSTOCK

2012 ACER EVS-3VKH-54 MILLING MACHINE TABLE SIZE: 10" X 54" ELECTRONIC VARIABLE SPEED SPEEDS: 60-4500 RPM ACU-RITE 2-AXIS DRO 3-WAY POWER FEED BOX WAYS EQUIPPED WITH: DRO

1995 FADAL VMC4020 VERTICAL MACHINING CENTER X AXIS TRAVEL: 40" Y AXIS TRAVEL: 20" Z AXIS TRAVEL: 20" TABLE SIZE: 47.94" X 20" MAX TABLE LOAD: 1,500 LBS SPINDLE MOTOR: 22.5 HP SPINDLE SPEED: 10,000 RPM SPINDLE TAPER: 40 CT TOOL CHANGER: 21 ATC EQUIPPED WITH: RIGID TAPPING 10,000 RPM SPINDLE 15 HP MOTOR

2015 SOUTHWORTH LS4-36 HYDRAULIC LIFT TABLE 4000 LB LOAD CAPACITY TABLE SIZE: 48" X 24" RAISED HEIGHT: 42.75" LOWERED HEIGHT: 6.75" S/N: A710568A

2007 ORMA PM/AIR/SYSTEM 3D THERMOFORM LAMINATION MACHINE CAPACITY INFORMATION 5FT X10FT X 1.5FT VOLTAGE: 230V FREQUENCY: 60HZ POWER: 60KW CURRENT: 106 A PNEUMATIC AIR/SYSTEM 5 BAR (PRESSURE) THE MACHINE IS WORKING AND UNDER POWER. THE AIR/SYSTEM HAS BEEN DESIGNED TO COVER ROUTED PANELS BOTH WITH VENEER AND THERMOPLASTIC MATERIALS USING OR NOT USING THE MEMBRANE. IT JOINS AN INFEED/OUTFEED AUTOMATIC SYSTEM WITH MODERN HEATING SYSTEMS, VACUUM SYSTEM, AND ELECTRONIC CONTROL OF PRESSURE PHASES.

1979 BLUE VALLEY 60B CIRCLE SHEAR 3/8" CAPACITY 12' MAX DIAMETER EQUIPPED WITH: A/C MAIN MOTOR DRIVE AIR HOLD-DOWN POWER ADJUSTMENT PUSH BUTTON CONTROLS

2009 DMG LASERTEC 80 5-AXIS LASER NUMBER OF AXES: 5 MAX X TRAVEL: 31.5" MAX Y TRAVEL: 19.6" MAX Z TRAVEL: 27.5" MAX A TRAVEL: +- 150 DEGREES MAX C TRAVEL: 360 DEGREES MAX A AXIS TOP SPEED: 270 RPM MAX C AXIS TOP SPEED: 550 RPM CLAMPING TABLE SIZE: 7.87" EQUIPPED WITH: VERTICAL TOUCH PROBE LASAG INDUSTRIAL LASER FLS 652 N CHILLER UNIT DUST COLLECTOR

2001 HARRISON M 550 GH ENGINE LATHE W/ DROS SWING OVER BED (INCH): 21.81 SWING OVER CROSS SLIDE (INCH): 14.57 SWING IN GAP (INCH): 32.68 DISTANCE BETWEEN CENTERS (INCH) 80" BED WIDTH (INCH) 15.75 SPINDLE BORE (INCH) 3 SPINDLE NOSE (CAMLOCK) D1-11 SPINDLE NOSE TAPER 5 MT SPINDLE SPEED RPM RANGE 18-1800 CHUCK SIZE 15.5" CROSS SLIDE TRAVEL (INCH) 11.81 WIDTH OF CROSS SLIDE (INCH) 8 TOP SLIDE TRAVEL (COMPOUND) (INCH) 7.5 TAILSTOCK QUILL DIAMETER (INCH): 3.74" TAILSTOCK QUILL TRAVEL (INCH) 5.7 TAILSTOCK QUILL TAPER 6 MT LONGITUDINAL FEED RANGE (IN/REV) 0.0016 0.11 CROSS FEED RANGE (IN/REV) 0.0008 0.055 NUMBER OF INCH PITCHES 73 RANGE OF INCH PITCHES 2 - 84 NUMBER OF METRIC PITCHES 51 RANGE OF METRIC PITCHES: 0.2 - 14 NUMBER OF DIAMETRAL PITCHES 27 RANGE OF DIAMETRAL PITCHES 8 - 72 NUMBER OF MODULE PITCHES 27 RANGE OF MODULE PITCHES 0.2 3.5 VOLTAGE REQUIRED 230/460PHASE3 EQUIPPED WITH: 2-AXIS ACCURTIE DIGITAL READ OUTS 15 1/2" CHUCK-3-JAW IN/MM THREADING TAILSTOCK TOOL POST COOLANT MACHINE FOOT PRINT (LXWXH) (INCH)180 X 63 X 57* MACHINE WEIGHT (LBS.)7,942

2004 SCHIATTI B.S.7.20 BEVELER (GLASS UP TO 0.98" THICK AND WEIGHT OF 1,763.7 LBS) GLASS SHEETS: 3 TO 25 MM THICK (0.12" TO 0.98") MINIMUM SIZE OF 80MM X 100MM (3.15" TO 3.93") MAXIMUM WEIGHT OF 800KG (1,763.7 LBS) ACROSS THE ENTIRE MACHINE. RECHTILINEAR BEVELING MACHINE FOR GLASS. THE INCLINATION OF THE OF THE BEVEL CAN BE ADJUSTED FROM 3 DEGREES TO 45 DEGREES.

HARDINGE DV-59 TURRET LATHE SWING OVER BED: 9" BED LENGTH: 28" COLLET CAP: 1 1/16" 5 C-ROUND COLLETS SPINDLE TAPER: HARDINGE TAPER SPINDLE SPEEDS (8) 230-3900 RPM TRAVEL ACROSS SLIDE: 3.75" TRAVEL OF TURRET SLIDE: 4" MOTOR: 3/4 HP 3 PH / 220/440 VAC EQUIPPED WITH: HARDINGE CABINET STAND WITH STORAGE SPACE

2015 PROJET 3510/3500 3D PRINTER (2015) PROJET 3510/3500 DPPRO LARGE PRINTS 3D PRINTER 100-127VAC 50-60HZ 1PH 15A

2007 TRAJAN 1319 HORIZONTAL BANDSAW 13 ROUND CAPACITY 2HP 3PH MOTOR EQUIPPED WITH: HYDRAULIC LIFT COOLANT SYSTEM TUNGSTEN BLADE GUIDES

1976 PROMECAM RG35-20 HYDRAULIC PRESS BRAKE TONNAGE: 35 TONS LENGTH OF BED AND RAM: 79" DISTANCE BETWEEN HOUSINGS 66.5" RAM STROKE: 0" - 3.9" OPEN HEIGHT: 9.84" RAM SPEEDS: APPROACH: 129.61 IPM FORMING: 2.22 IPM RETURN: 94.2 IPM THROAT DEPTH: 8" DIMENSIONS: 102" X 46" X 78"

2005 RUTIL TECHNO JET 680/200 FMP1 HYDRAULIC PRESS 200T BED AREA: 23 1/2" X 19 3/4" DAYLIGHT: 35" RAM CYLINDER: 18" DIA. 480 VAC STROKE: 16" EQUIPPED WITH: 25 HP ELECTRIC MOTOR-DRIVEN HYDRAULIC PUMP HYDRAULIC FLUID RESERVOIR CONTROL CABINET

2005 RUTIL TECHNO JET 680/200 FMP1 200T HYDRAULIC PRESS BED AREA: 23 1/2" X 19 3/4" DAYLIGHT: 35" RAM CYLINDER: 18" DIA. 480 VAC STROKE: 16" EQUIPPED WITH: 25 HP ELECTRIC MOTOR-DRIVEN HYDRAULIC PUMP HYDRAULIC FLUID RESERVOIR CONTROL CABINET

2012 MILLTRONICS M-15 CNC LATHE 8" CHUCK LARGEST LOAD: 15 AMPS FULL-LOAD CURRENT: 30 AMPS INPUT VOLTAGE: 220 VC 3 PHASE SHORT CIRCUIT WITHSTANDING: 10,000 AMPS CENTURION 7T LATHE ONLY HAS 1384 HOURS OF OPERATION EQUIPPED WITH: TOOLING COLLETS

DANLY 45-TON PRESS MECHANICAL PRESS CAPACITY 45 TON STROKE OF SLIDE 3" SLIDE ADJUSTMENT 2-1/2" SHUT HEIGHT, SDAU 11-1/2" AREA OF BED 29" X 20" AREA OF RAM 11" X 9" WIDTH OF HOLE THROUGH BACK 15" STROKES PER MINUTE120 SPM SHOOT HOLE IN BED BOLSTER 9" X 7" AIR CLUTCH & BRAKE YES

STRIPPIT 1000 SX TURRET PUNCH MAX. MATERIAL THICKNESS 0.375" MAX. HOLE DIAMETER 3.500" ACCURACY +/- 0.005" TONNAGE 30 (METRIC) MAX. WORKPIECE SIZE STD. 51" X 60" HITS PER MINUTE ON 1" CC 225 HPM MAX. AXIS SPEED 2,000 IPM CONTOUR NIBBLING 390/195 HPM IN 10 GA./0.375" MATL EQUIPPED WITH: FANUC CONTROL 33 STATIONS AUTOMATIC REPOSITION ALL THE TOOLING SHOWN PLUS MORE APPROX. WEIGHT: 14,000 MACHINE DIMENSIONS: 103 WIDE X 93 HEIGHT X 17FT LENGTH

ZERO SHOT BLASTER BNP 55-6 SHOT BLAST CABINET ZERO BLAST CABINET MEDIA BLASTING TO CLEAN, PEEN, DEBURR, OR FINISH PARTS. THE CABINET'S INTERNAL SPACE MEASURES 42 X 22 X 28 INCHES. THE SYSTEM INCLUDES A RECLAIMER AND DRY FILTER DUST COLLECTOR. INCLUDES: BLAST CABINET WITH BUILT-IN BENCH UNIT, DRY FILTER 300, CONTROL FOOT PEDAL, SPRAY GUN, AND HOSE. REMOVE RUST, MILL SCALE, HEAT SCALE, AND CARBON BUILDUP FROM METALS. STRIP PAINT, POWDER COATING, PLATING, AND ANODIZING FROM PARTS FOR REWORK. ELIMINATE BURRS, PARTING LINES, FLASHINGS, AND OTHER DEFECTS FROM CASTINGS AND INJECTION-MOLDED PARTS. EXTRACT RESIDUAL SAND FROM CASTINGS. BEAUTIFY STEEL, STAINLESS STEEL, ALUMINUM, BRASS, AND OTHER METALS WITH A UNIFORM MATTE FINISH. ETCH ARTWORK AND LETTERING INTO GLASS, STONE, PLASTICS, METAL AND OTHER MATERIALS. CLEAN RELEASE AGENTS AND MATERIAL BUILDUP FROM MOLDS.

MATTISON 24 X 72 GRINDER 24 X 72 MAGNETS ON THE TABLES H.P. SPINDLE: 40 RPM OF THE GRINDING WHEEL: 1175 INCREMENTAL IN-FEED: 0.0004 SPEED RANGE: NOT VARIABLE

MATTISON 24 X 72 GRINDER 24 X 72 MAGNETS ON THE TABLES H.P. SPINDLE: 40 RPM OF THE GRINDING WHEEL: 1175 INCREMENTAL IN-FEED: 0.0004 SPEED RANGE: NOT VARIABLE

2000 PEDRAZOLLI BROWN 60 CDV TUBE BENDER MOTOR POWER: 8.6KW/11.5HP MAX. 230/480V. 21' 6" FRAME LENGTH 16' SLIDE RAILS LENGTH CURRENTLY SET UP FOR 1-1/2" SQUARE TUBE

2013 DMG MORI MILLTAP 700 VERTICAL MACHINING CENTER X-AXIS TRAVEL 27.6" Y-AXIS TRAVEL 16.5" Z-AXIS TRAVEL 15" RAPID RATE (X/Y/Z) 2,362 IPM TABLE SIZE 33.1" X 16.5" SPINDLE TAPER BT-30 SPINDLE SPEED 24,000 RPM SPINDLE MOTOR 15 HP MAX TABLE LOAD 882 LBS TOOL CHANGER 25 TOOL ATC EQUIPPED WITH: SIEMENS 840D 10.4" TFT SCREEN DIGITAL PARTS COUNTER & TIMER PROGRAMGUIDE VIA SINUMERIK CYCLES & G-CODE 4TH & 5TH AXIS ADAPTABLE NEW SPINDLE IN 2021

2008 HAAS OM-2A VERTICAL MACHINING CENTER X AXIS TRAVEL: 12 Y AXIS TRAVEL: 12 Z AXIS TRAVEL: 12 RAPID RATE X AXIS: 757 IPM RAPID RATE Y AXIS: 757 IPM RAPID RATE Z AXIS: 757 IPM TABLE SIZE: 20" X 10" MAX TABLE LOAD: 150 LBS SPINDLE MOTOR: 5 HP SPINDLE SPEED: 30,000 RPM SPINDLE TAPER: ISO#20 TOOL CHANGER: 20 ATC WEIGHT: 5200 LBS EQUIPPED WITH: HAAS CNC CONTROL RIGID TAPING MACROS M19 SPINDLE ORIENTATION HIGH SPEED MACHINING RENISHAW TS27R TABLE PROBE

2007 HYPERTHERM HT2000 PLASMA CUTTING SYSTEM COMPLETE SYSTEM WITH RHF CONSOLE GAS CONSOLE TORCH ASSEMBLY AND 15FT HOSE POWER SUPPLY MOTOR VALVE CONSOLE TIMER COUNTER

1995 AMADA SPH-30C PRESS (30 TON CAP MDL. SPH-30C AMADAN-SS SYSTEM 2 CONTROL 15.4" DIST. BETWEEN UPRIGHTS 20.1" THROAT DEPTH 3.94" LENGTH OF STROKE 20.5" OPEN HEIGHT DIMENSIONS: 87IN H X 36IN W X 62IN D WEIGHT 5400 LBS)