Phase II Surplus to Ongoing Operations of Major Energy Manufacturer
Category: CNC MACHINE CENTERS
Total Lots:
24
Total Sales:
🔒 Subscribe
Lot Price Distribution
| Year | Make | Model | Lot Description | Hammer Price | |
|---|---|---|---|---|---|
|
1995 | NIIGATA | HN80C |
1995 NIIGATA HN80C HORIZONTAL MACHINING CENTER, 31.5" X 31.5" PALLETS S/N: 46250041 INTEGRATED 5TH AXIS, TSUDAKOMA 32" RNCK-801 PALLET SIZE(2) 31.5" X 31.5" (1,000MM X 1,000MM) NO. OF PALLETS: 2 MAX PALLET LOAD 5,500 LBS. TRAVELS (X) 60" (Y) 48.4" (Z) 40" (B) .001 DEGREE 4TH AXIS SPINDLE TAPER CAT 50 TAPER SPINDLE DRIVE MOTOR 40 HP A.C. SPINDLE SPEEDS 12,000 RPM AUTO TOOL CHANGE CAPACITY 126 ATC FANUC 15-M CONTROLLER MACHINE WEIGHT: 45,000 LBS. APPROX.
|
🔒 Subscribe |
|
|
CINCINNATI-GILBERT |
CINCINNATI-GILBERT HORIZONTAL BORING MILL W/ FAGOR CONTROLLER 5" SPINDLE 48" X 114" TABLE SIZE 60" Y TRAVEL (APPROX) 96" TABLE TRAVEL 36" SPINDLE TRAVEL 48" SADDLE TRAVEL (IN & OUT) OUTRIGGER SADDLE SUPPORTS HARDENED WAYS ON COLUMN FOR HEADSTOCK VERTICAL TRAVEL GETTY'S SERVO MOTORS. (MOTORS WERE JUST SENT OUT AND SERVICED 7-20-21 APPROX) THE TABLE IS DRIVEN FROM THE BACK SIDE OF THE GEAR BOX THROUGH THE SPLINE SHAFT AND THEN TO THE TABLE SCREW. (SEE PICS) SERVO DRIVE MOTOR ON ALL 4 AXIS #50 TAPER OUTRIGGERS FOR SADDLE SUPPORT FAGOR CONTROLLER SYSTEM **ROTARY TABLE DOES NOT GO WITH MACHINE**
|
🔒 Subscribe | ||
|
|
SIEMENS | 60" TRAVEL CUSTOM BUILT VERTICAL HONING MACHINE |
SIEMENS 60" TRAVEL CUSTOM BUILT VERTICAL HONING MACHINE, W/ INFEED TABLE - SIEMENS CUSTOM BUILT VERTICAL HONING MACHINE DOUBLE COLUMN DESIGN W/ 72" BETWEEN COLUMNS 60" VERTICAL TRAVEL OF HONING HEAD 55" X 65" T-SLOTTED TABLE 48" INFEED ON TABLE, W/ HYDRAULIC CYLINDER 10 HP VICKERS HYDRAULIC PUMP & TANK MACHINE IS SITTING IN A PIT CURRENTLY (A TAPERED PIT TO COLLECT FLUIDS) APPROX 2' DEEP
|
🔒 Subscribe | |
|
|
BULLARD | CUT-MASTER |
BULLARD CUT-MASTER VERTICAL TURRET LATHE 42" TABLE DIA 1 - SIDE HEAD 1 - 5 POS. RAIL HEAD 2 AXIS DRO ON EACH HEAD 40 HP DRIVE MOTOR TRABON LUBE SYSTEM
|
🔒 Subscribe | |
|
|
NORTON | OD GRINDER |
NORTON OD GRINDER 40 HP DRIVE MOTOR 36" X 5" GRINDING WHEEL FOCUS 2 VARI-DRIVE ON WORKHEAD PAPER FILTER COOLANT SYSTEM
|
🔒 Subscribe | |
|
|
1991 | OKUMA | LC40 SIMULTURN |
1991 OKUMA LC40 SIMULTURN CNC LATHE, TWIN TURRET, CHUCKER S/N: 2250 UPPER & LOWER TURRETS 16" 3-JAW CHUCK CONVEYOR * WITH TAILSTOCK*
|
🔒 Subscribe |
|
|
1991 | OKUMA | LC40 SIMULTURN |
1991 OKUMA LC40 SIMULTURN CNC LATHE, TWIN TURRET, CHUCKER S/N: 2250 UPPER & LOWER TURRETS 16" 3-JAW CHUCK CONVEYOR * NO TAILSTOCK*
|
🔒 Subscribe |
|
|
GIDDINGS & LEWIS | NC VTL |
GIDDINGS & LEWIS NC VTL W/ FAGOR CONTROLLER S/N 512-007-70 W/ FAGOR CONTROLLER
|
🔒 Subscribe | |
|
|
AMERICAN |
AMERICAN ENGINE LATHE, W/ DRO SYSTEM L-NOSE SPINDLE 7 - 600 SPINDLE RPM 4-WAY TOOL POST 1/2-30 TPI .0040 - .240 FEED RATE 3" SPINDLE HOLE 28" 4-JAW FACE PLATE COMB. 2 - ROLLER STEADY RESTS (1 - 13" CAP., / 1 - 21" CAP.) TAPER ATTACHMENT 2 - AXIS NEWALL DRO SYSTEM MAYFRAN CHIP CONVEYOR
|
🔒 Subscribe | ||
|
|
OKUMA | LB-25 |
OKUMA LB-25 CNC TURNING CENTER W/ TAILSTOCK 12-3/4" 3-JAW SMW CHUCK OSP-5020L CONTROLLER CHIP CONVEYOR S/N: 0569
|
🔒 Subscribe | |
|
|
GIDDINGS & LEWIS | CHIPMASTER |
5' X 13" GIDDINGS & LEWIS CHIPMASTER RADIAL DRILLING MACHINE
|
🔒 Subscribe | |
|
|
36" X 36" AIRLIFT INDEXING TABLE (ON 5" CINC-GILBERT HBM) 9-7/8" HIGH
|
🔒 Subscribe | |||
|
|
AMERICAN | 27" X 120" |
AMERICAN 27" X 120" ENGINE LATHE W/ DRO S/N: 80580/80 27" ACTUAL SWING 120" CC'S APPROX. CAMLOCK SPINDLE NOSE 24 - 1600 SPINDLE RPM 20" 4-JAW CHUCK 4 WAY TOOL POST 2 AXIS DRO SYSTEM
|
🔒 Subscribe | |
|
|
1996 | OKUMA | MC-50VA |
1996 OKUMA MC-50VA VERTICAL MACHINING CENTER W/ 4TH AXIS - OKUMA MC-50VA VERTICAL CNC MILLING MACHINE S/N 0379 W/ TSUDAKOMA 12" 4TH AXIS ROTARY TABLE OSP7000L CONTROLLER 51" X 25" TABLE TRAVELS: X-41.3", Y-20", Z-22" SPINDLE SPEEDS TO 5,000 RPM CAT 50 SPINDLE TAPER 20 ATC COOLANT SYSTEM CHIP CONVEYOR
|
🔒 Subscribe |
|
|
GIDDINGS & LEWIS | NC VTL CENTER |
GIDDINGS & LEWIS NC VTL CENTER W/ CONTROL W/ RAIL & SIDE HEAD CONTROLS
|
🔒 Subscribe | |
|
|
BULLARD | VERTICAL TURRET LATHE |
BULLARD VERTICAL TURRET LATHE 2 RAIL & 1 SIDE HEAD S/N: 29777 2 RAIL HEADS (1 - 5 POS TURRET HEAD, 1 - STRAIGHT HEAD) 1 SIDE HEAD 40 HP DRIVE MOTOR SONY DRO'S ON EACH HEAD APPROX. WEIGHT: 70,000 LBS. (NEEDS TO BE LAID DOWN FOR SHIPMENT)
|
🔒 Subscribe | |
|
|
2 SPINDLE OPPOSED SPECIAL DRILLING MACHINE
|
🔒 Subscribe | |||
|
|
GIDDINGS & LEWIS | VTL |
GIDDINGS & LEWIS VTL W/ FAGOR CONTROLLER 50 HP MAIN DRIVE MOTOR 5 POSITION TURRET CHIP CONVEYOR S/N: 511-006-70 W/ FAGOR CONTROLLER
|
🔒 Subscribe | |
|
|
CLAUSING | SPEED DRILLING MACHINE |
3 SPINDLE CLAUSING SPEED DRILLING MACHINE NICE BIG TABLE BENCH MODEL DRILLS MOUNTED TO LARGE TABLE #2 MT IN SPINDLES 600 - 4000 RPM 3/4 HP MOTORS
|
🔒 Subscribe | |
|
|
AIRLIFT | 30" X 36" |
AIRLIFT 30" X 36" ROTARY TABLE 10-3/4" HIGH
|
🔒 Subscribe | |
|
|
GIDDINGS & LEWIS | HBM 340T |
GIDDINGS & LEWIS HBM 340T W/ DRO S/N 7035 36" X 74" TABLE 36" VERTICAL TRAVEL 60" TABLE TRAVEL 7.5 - 450 RPM ON MAIN SPDL. / 25 - 1500 AUX SPINDLE 15 HP MAIN DRIVE MOTOR 4 AXIS SONT DRO SYSTEM (TABLE, HEADSTOCK, SADDLE & SPINDLE)
|
🔒 Subscribe | |
|
|
CINCINNATI | 307-14 CINOVA 80 |
CINCINNATI 307-14 CINOVA 80 HOR MILL W/ UNIV MILLING HEAD S/N: 10J3P5S-29 14" X 62-1/2" TABLE #50 TAPER IN SPINDLE 25-2000 RPM UNIVERSAL MILLING SPINDLE 50-750 RPM 1/2 - 60 IPM FEED RATES 7-1/2 HP MOTOR *NEW SCREW AND NUT ON KNEE* COOLANT PUMP WEIGHT APPROX. 6,000 LBS
|
🔒 Subscribe | |
|
|
CINCINNATI BICKFORD |
6' X 17" CINCINNATI BICKFORD RADIAL DRILL W/ 28" X 20" UNIVERSAL BOX TABLE S/N 5E-632 #6 MT IN SPINDLE 45 - 1700 RPM POWER ELEVATION, CLAMPING & HEAD TRAVERSE COOLANT PUMP
|
🔒 Subscribe | ||
|
|
1991 | HMT | RD.61 |
1991 HMT RD.61 4' X 13" RADIAL DRILL W/ BOX TABLE, 19-1/2" X 28-1/2" TILTING TABLE, 15-2000 SPINDLE RPM, #5 MT, POWER CLAMPING
|
🔒 Subscribe |
1995 NIIGATA HN80C
CNC MACHINE CENTERS
1995 NIIGATA HN80C HORIZONTAL MACHINING CENTER, 31.5" X 31.5" PALLETS S/N: 46250041 INTEGRATED 5TH A...
Hammer Price:
🔒
CINCINNATI-GILBERT
CNC MACHINE CENTERS
CINCINNATI-GILBERT HORIZONTAL BORING MILL W/ FAGOR CONTROLLER 5" SPINDLE 48" X 114" TABLE SIZE 60" Y...
Hammer Price:
🔒
SIEMENS 60" TRAVEL CUSTOM BUILT VERTICAL HONING MACHINE
METALWORKING & FABRICATION EQUIPMENT
SIEMENS 60" TRAVEL CUSTOM BUILT VERTICAL HONING MACHINE, W/ INFEED TABLE - SIEMENS CUSTOM BUILT VERT...
Hammer Price:
🔒
BULLARD CUT-MASTER
METALWORKING & FABRICATION EQUIPMENT
BULLARD CUT-MASTER VERTICAL TURRET LATHE 42" TABLE DIA 1 - SIDE HEAD 1 - 5 POS. RAIL HEAD 2 AXIS DRO...
Hammer Price:
🔒
NORTON OD GRINDER
METALWORKING & FABRICATION EQUIPMENT
NORTON OD GRINDER 40 HP DRIVE MOTOR 36" X 5" GRINDING WHEEL FOCUS 2 VARI-DRIVE ON WORKHEAD PAPER FIL...
Hammer Price:
🔒
1991 OKUMA LC40 SIMULTURN
CNC MACHINE CENTERS
1991 OKUMA LC40 SIMULTURN CNC LATHE, TWIN TURRET, CHUCKER S/N: 2250 UPPER & LOWER TURRETS 16" 3-JAW ...
Hammer Price:
🔒
1991 OKUMA LC40 SIMULTURN
CNC MACHINE CENTERS
1991 OKUMA LC40 SIMULTURN CNC LATHE, TWIN TURRET, CHUCKER S/N: 2250 UPPER & LOWER TURRETS 16" 3-JAW ...
Hammer Price:
🔒
GIDDINGS & LEWIS NC VTL
CNC MACHINE CENTERS
GIDDINGS & LEWIS NC VTL W/ FAGOR CONTROLLER S/N 512-007-70 W/ FAGOR CONTROLLER...
Hammer Price:
🔒
AMERICAN
METALWORKING & FABRICATION EQUIPMENT
AMERICAN ENGINE LATHE, W/ DRO SYSTEM L-NOSE SPINDLE 7 - 600 SPINDLE RPM 4-WAY TOOL POST 1/2-30 TPI ....
Hammer Price:
🔒
OKUMA LB-25
CNC MACHINE CENTERS
OKUMA LB-25 CNC TURNING CENTER W/ TAILSTOCK 12-3/4" 3-JAW SMW CHUCK OSP-5020L CONTROLLER CHIP CONVEY...
Hammer Price:
🔒
GIDDINGS & LEWIS CHIPMASTER
CNC MACHINE CENTERS
5' X 13" GIDDINGS & LEWIS CHIPMASTER RADIAL DRILLING MACHINE...
Hammer Price:
🔒
AMERICAN 27" X 120"
METALWORKING & FABRICATION EQUIPMENT
AMERICAN 27" X 120" ENGINE LATHE W/ DRO S/N: 80580/80 27" ACTUAL SWING 120" CC'S APPROX. CAMLOCK SPI...
Hammer Price:
🔒
1996 OKUMA MC-50VA
CNC MACHINE CENTERS
1996 OKUMA MC-50VA VERTICAL MACHINING CENTER W/ 4TH AXIS - OKUMA MC-50VA VERTICAL CNC MILLING MACHIN...
Hammer Price:
🔒
GIDDINGS & LEWIS NC VTL CENTER
CNC MACHINE CENTERS
GIDDINGS & LEWIS NC VTL CENTER W/ CONTROL W/ RAIL & SIDE HEAD CONTROLS...
Hammer Price:
🔒
BULLARD VERTICAL TURRET LATHE
METALWORKING & FABRICATION EQUIPMENT
BULLARD VERTICAL TURRET LATHE 2 RAIL & 1 SIDE HEAD S/N: 29777 2 RAIL HEADS (1 - 5 POS TURRET HEAD, 1...
Hammer Price:
🔒
GIDDINGS & LEWIS VTL
CNC MACHINE CENTERS
GIDDINGS & LEWIS VTL W/ FAGOR CONTROLLER 50 HP MAIN DRIVE MOTOR 5 POSITION TURRET CHIP CONVEYOR S/N:...
Hammer Price:
🔒
CLAUSING SPEED DRILLING MACHINE
METALWORKING & FABRICATION EQUIPMENT
3 SPINDLE CLAUSING SPEED DRILLING MACHINE NICE BIG TABLE BENCH MODEL DRILLS MOUNTED TO LARGE TABLE #...
Hammer Price:
🔒
GIDDINGS & LEWIS HBM 340T
CNC MACHINE CENTERS
GIDDINGS & LEWIS HBM 340T W/ DRO S/N 7035 36" X 74" TABLE 36" VERTICAL TRAVEL 60" TABLE TRAVEL 7.5 ...
Hammer Price:
🔒
CINCINNATI 307-14 CINOVA 80
CNC MACHINE CENTERS
CINCINNATI 307-14 CINOVA 80 HOR MILL W/ UNIV MILLING HEAD S/N: 10J3P5S-29 14" X 62-1/2" TABLE #50 TA...
Hammer Price:
🔒
CINCINNATI BICKFORD
METALWORKING & FABRICATION EQUIPMENT
6' X 17" CINCINNATI BICKFORD RADIAL DRILL W/ 28" X 20" UNIVERSAL BOX TABLE S/N 5E-632 #6 MT IN SPIND...
Hammer Price:
🔒
1991 HMT RD.61
METALWORKING & FABRICATION EQUIPMENT
1991 HMT RD.61 4' X 13" RADIAL DRILL W/ BOX TABLE, 19-1/2" X 28-1/2" TILTING TABLE, 15-2000 SPINDLE ...
Hammer Price:
🔒