Quarterly Beverage Equipment Auction Fillers Cappers Tanks and More

PACK LEADER PRO-625 PRESSURE SENSITIVE FRONT AND BACK LABELER - THE PRO-625 ACCOMMODATES A WIDE RANGE OF LABELING NEEDS. APPLYING LABELS TO THE FRONT AND BACK OF A CONTAINER IS BUILT INTO THE TWO-SIDE APPLY DESIGN. YOU CAN ALSO EASILY CONFIGURE FOR A ONE-SIDE APPLY OR USE THE OPTIONAL WRAP-STATION FOR ROUND CONTAINERS. USED PACK LEADER LABELER WITH: LABEL TYPE: FRONT AND BACK PRODUCTION OUTPUT: MAXIMUM DISPENSING SPEED: 131.2 FEET PER MINUTE (40 METERS PER MINUTE) MAXIMUM CONVEYOR SPEED: 131.2 FEET PER MINUTE (40 METERS PER MINUTE MAXIMUM LABEL SIZE: LENGTH: 12 INCHES HEIGHT: 7 INCHES MAXIMUM CONTAINER DIMENSIONS: WIDTH: 7.5 INCHES HEIGHT: 13 INCHES SPOOL DIAMETER: 14 INCHES INNER CORE: 3 INCHES CONVEYOR DIMENSIONS: LENGTH: 108 INCHES WIDTH: 6 INCHES ADJUSTABLE INFEED HEIGHT: 33.5 - 35.5 INCHES ADJUSTABLE GUIDE RAILS TOUCH SCREEN CONTROLS ELECTRICAL REQUIREMENTS: 110 VOLTS, 60 HERTZ, 1 PHASE STAINLESS STEEL CONSTRUCTION

ARPAC DELKOR SPOT-PAK 112-SS-24 AUTOMATIC STAINLESS STEEL SHRINK BUNDLER - USED DELKOR SPOT-PAK 112-SS-24 AUTOMATIC STAINLESS STEEL SHRINK BUNDLER WITH: SPEED: UP TO 25 BUNDLES PER MINUTE (DEPENDING ON PRODUCT SPECIFICATIONS) 24 INCH SEAL BAR APERTURE DIMENSIONS WIDTH: 27 INCHES HEIGHT: 18 INCHES CONVEYOR: LENGTH: 92 INCHES WIDTH: 24.75 INCHES ARPAC TOUCH PAD CONTROLS HEAT SEAL AND TUNNEL TEMPERATURE READOUTS DIGITAL COUNTER STAINLESS STEEL CONSTRUCTION ELECTRICAL: 208-230/460 VOLTS, 3 PHASE, 60 HZ TOP LOAD CASE PACKER: SPEED: UP TO 150 PACKAGE CONTAINERS PER MINUTE (DEPENDING ON PRODUCT SPECIFICATIONS) CHAIN CONVEYOR: LENGTH: 60 INCHES WIDTH: 24 INCHES CLEARANCE HEIGHT: 10 INCHES CASE MAGAZINE WIDTH: 17 INCHES VARIABLE SPEED DRIVE STAINLESS STEEL CONSTRUCTION ELECTRICAL: 90/180 VOLTS, SINGLE PHASE, 60 HZ CONVEYOR WITH LANER: BELT WIDTH: 24 INCHES BELT LENGTH: 94 INCHES GUIDE RAIL HEIGHT: 3.75 INCHES WORKING HEIGHT: 36 INCHES LANER WIDTH: 5.5 INCHES LANER HEIGHT: ADJUSTABLE STAINLESS STEEL CONSTRUCTION ELECTRICAL: 110 VOLTS, SINGLE PHASE, 60 HZ

12 HEAD STAINLESS STEEL LIQUID FILLER WITH CONVEYOR - USED LIQUID FILLER WITH: (12) HEAD FILLER NOZZLE LENGTH: 12 INCHES NOZZLE CENTERS: 2.5 INCHES NOZZLE LENGTH BELOW CAP: 1.5 INCHES CONVEYOR: LENGTH: 180 INCHES WIDTH: 4.5 INCHES TOUCHSCREEN HMI: 6 INCHES HOPPER CONNECTION: 2 INCH LEESON WASHDOWN MOTOR ELECTRICAL: 230/460 VOLTS, 50/60 HZ, 3 PHASE

JORESTECH SEMIAUTOMATIC HEAT SHRINK TUNNEL - USED HEAT SHRINK TUNNEL WITH: THROUGHPUT: UP TO 200 CONTAINERS PER MINUTE DEPENDING ON PRODUCT AND OPERATION SPEED MAXIMUM PRODUCT DIMENSIONS: DIAMETER: 4.5 INCHES HEIGHT: 11.5 INCHES CONVEYOR SPEED: UP TO 39 FEET PER MINUTE APERTURE DIMENSIONS: WIDTH: 5.75 INCHES HEIGHT: 12.5 INCHES HEAT ZONE LENGTH: 57 INCHES ROLLER DIMENSIONS: WIDTH: APPROXIMATELY 7 INCHES CENTERS: 0.59 INCHES INFEED/DISCHARGE HEIGHT: 33 INCHES FLOW: RIGHT TO LEFT POWER TYPE: HEATED AIR VARIABLE SPEED DRIVE PAINTED STEEL CONSTRUCTION THREADED LEVELER LEGS DUAL TOP-MOUNTED CONVECTION MOTORS: 1 HORSEPOWER ELECTRICAL: 220 VOLTS, 60 HZ, PHASE 3

SHANKLIN T-7XL STAINLESS HEAT TUNNEL 22" W X 9" T - USED SHANKLIN T-7XL HEAT TUNNEL WITH: APERTURE: WIDTH: 22 INCHES HEIGHT: 8.5 INCHES LENGTH OF TUNNEL: 47 INCHES CONVEYOR: WIDTH: 14 INCHES HEIGHT: 29 INCHES LENGTH: 60 INCHES SINGLE TUNNEL CONVEYOR SPEED: 15 - 120 FEET PER MINUTE PRECISION INDICATING CONTROLLER CALIBRATED 50 TO 500 FAHRENHEIT .75 HORSEPOWER MOTOR FOR BLOWER .5 HORSEPOWER MOTOR FOR CONVEYOR

36 INCH ROTARY ACCUMULATION TABLE - USED ROTARY ACCUMULATION TABLE WITH: ROTARY TABEL: DIAMETER: 36 INCHES HEIGHT: 34 INCHES MATSOOKA SPEED CONTROL: 60 HERTZ 110 VOLTS

UNIVERSAL LABELING UPA-II PRINT AND APPLY LABELER WITH: TOUCH SCREEN CONTROLS CONVEYOR INCLUDED CONVEYOR DIMENSIONS: 4.5 INCHES WIDE X 93 INCHES LONG X 34 INCHES HIGH TABLE TOP CONVEYOR BELT MANUAL CONVEYOR SWITCHES PREVIOUSLY RUNNING CLEAR LABELS ADJUSTABLE APPLICATION HEIGHT

AXON EZ-650 WIDE FRAME SHRINK SLEEVE APPLICATOR - USED AXON EZ-650 SHRINK SLEEVE LABEL APPLICATOR WITH: DESIGNED FOR LARGER SLEEVING AND NECK BANDING APPLICATIONS, SUCH AS MULTI-PACKS, TUBS, AND SCROUNDS OUTPUT: UP TO 40 CONTAINERS PER MINUTE FILM LAYFLAT RANGE: 250 TO 650 MILLIMETERS CONTAINER DIAMETER: 155 TO 410 MILLIMETERS APPLIED MATERIALS: PVC, PETG, OPS, PLA FILM THICKNESS: 60 TO 70 MICRONS AIR PRESSURE REQUIREMENTS: 80 PSI, 5 SCFM

GAULIN 15M-8TA 2 HORSEPOWER PISTON HOMOGENIZER - USED GAULIN 15M-8TA HOMOGENIZER WITH: PISTON TYPE PILOT HOMOGENIZER MAXIMUM CAPACITY: 15 GALLONS PER HOUR EFFICIENTLY PROCESSES LABORATORY SAMPLES AS SMALL AS 1/2 PINT STAINLESS STEEL CONTACT PARTS CAPABLE OF 8000 PSI ON A CONTINUOUS BASIS AND 10,000 PSI FOR INTERMITTENT OPERATION 3 HORSEPOWER MOTOR

ERIEZ EZ-DSP PIPELINE METAL DETECTOR 6" DIA APERTURE - USED ERIEZ EZ-DSP PIPELINE METAL DETECTOR WITH: APERTURE DIMENSIONS: 6 INCHES CURRENT PIPE DIAMETER: 1.875 INCHES PIP LENGTH: 36 INCHES PNEUMATIC REJECT VALVE CART MOUNTED WITH CASTERS TOUCH SCREEN HMI

SHANKLIN T 6XL HEAT TUNNEL 18" WIDTH X 7" TALL - USED SHANKLIN T 6 XL WITH: APERTURE: WIDTH: 18 INCHES HEIGHT: 7 INCHES LENGTH OF TUNNEL: 30 INCHES CONVEYOR: WIDTH: 11 INCHES LENGTH: 57 INCHES HEIGHT: 33 INCHES .75 HORSEPOWER MOTOR OAD: LENGTH: 57 INCHES WIDTH: 38 INCHES HEIGHT: 66 INCHES

CAN LINES ENGINEERING 90 DEGREE TURN CONVEYOR WITH PARALLEL TRANSFER PLASTIC MAT-TOP CONVEYOR WITH: 90 DEGREE, RIGHT-HAND TURN FROM INFEED PARALLEL TRANSFER SECTION INFEED HEIGHT: 37 INCHES DISCHARGE HEIGHT: 42 INCHES CONVEYOR WIDTH: 14 INCHES INFEED LENGTH: 186 INCHES OUTFEED LENGTH: 60 INCHES OVERALL LENGTH: APPROXIMATELY 260 INCHES (2) 1 HORSEPOWER MOTORS STAINLESS STEEL CONSTRUCTION SCREW DOWN LEVELING FEET

51" WIDE X 53' LONG PLASTIC MAT-TOP CONVEYOR WITH STAINLESS STEEL FRAME - USED CONVEYOR WITH: CONVEYOR DIMENSIONS: 53.5 FEET LONG X 51 INCHES WIDE CONVEYOR HEIGHT: 32.5 INCHES 1 HORSEPOWER MOTOR STAINLESS STEEL, SEALED MOTOR HOUSING PLASTIC MAT-TOP CONVEYOR BELT WASH DOWN, STAINLESS STEEL CONSTRUCTION SCREW DOWN LEVELING FEET

CREPACO 350 GALLON SS CENTER AGITATOR HOLDING TANK - USED CREPACO 350 GALLON HOLDING TANK WITH: MANWAY: 16.5 INCH DIAMETER FLIP TOP WITH SCREEN TOP CENTER MOUNTED CIP BALL 2 INCH INSULATION TOP SIDE MOUNTED FILTER 1 HORSEPOWER MIXING MOTOR TOP CENTER MOUNTED DUAL PROPELLER AGITATOR VESSEL DIMENSIONS: 64 INCHES LONG X 45 INCHES WIDE X 35 INCHES DEEP

SHANKLIN T-7XL 8.5" H X 22" W HEAT SHRINK TUNNEL - USED SHANKLIN T-7XL HEAT TUNNEL WITH: APERTURE: WIDTH: 22 INCHES HEIGHT: 8.5 INCHES LENGTH OF TUNNEL: 47 INCHES CONVEYOR: WIDTH: 15 INCHES HEIGHT: 36 INCHES LENGTH: 60 INCHES SINGLE TUNNEL CONVEYOR SPEED: 15 - 120 FEET PER MINUTE PRECISION INDICATING CONTROLLER CALIBRATED 50 TO 500 FAHRENHEIT .75 HORSEPOWER MOTOR FOR BLOWER .5 HORSEPOWER MOTOR FOR CONVEYOR

SHANKLIN 19" WIDE X 7" TALL HEAT SHRINK TUNNEL WITH: HEAT TUNNEL OPENING: 19 INCHES WIDE X 7.5 INCHES TALL CONVEYOR DIMENSIONS: 96 INCHES LONG X 16 INCHES WIDE STAINLESS STEEL CONSTRUCTION CASTERS CONVEYOR ELEVATION: 38 INCHES DUAL CHAMBER

REFRIGERATION UNIT WITH RUSSELL ASLA25 SLIM-TEMP UNIT COOLER - EXPERIENCE UNPARALLELED EFFICIENCY AND PERFORMANCE WITH THE RUSSELL SLIM-AIR UNIT COOLER, DESIGNED TO OPTIMIZE YOUR SPACE WHILE DELIVERING POWERFUL COOLING FOR ANY ENVIRONMENT. USED REFRIGERATION UNIT WITH RUSSELL UNIT COOLER WITH: BTUH CAPACITY (@ 25F S.T. AND 10F TD): WITH R404A REFRIGERANT: 6,400 WITH R407A REFRIGERANT: 6,900 FAN MOTORS: 2-16 W CONNECTIONS: LIQUID: 1/2 FN SUCTION: 7/8 ODS OVERALL DIMENSIONS (FEET): LENGTH: 49 WIDTH: 56.1875 DESIGN PRESSURE: 180 PSIG MOTOR CIRCUIT (2X): 0.021 HP, 115 V, 60 HZ, SINGLE PHASE EC MOTOR AMPS: 1.16 MINIMUM CIRCUIT AMPS: 15

DOMINO M SERIES PLUS T100 PRINT AND APPLY LABELER WITH: CAPACITY: 20 - 80 LABELS PER MINUTE WIPE ON APPLICATION CURRENT LABEL WIDTH: 4.25 INCHES TOUCH PAD CONTROLS DIGITAL DISPLAY STAND MOUNTED WITH ADJUSTABLE WORKING HEIGHT PHOTO EYE PRODUCT DETECTION

CODE-IN-MOTION VERSAPPLY 9284 PRINT APPLY LABELER - USED CODE-IN-MOTION VERSAPPLY PRINT AND APPLY LABELER WITH: RIGHT HAND OPERATION TAMP ARM LABEL APPLICATION LABEL DIMENSIONS: 4 INCHES WIDE X 2 INCHES TALL PRINTER: MANUFACTURER: DATAMAX-O'NEIL MODEL: DMX-A-4606 SERIAL: 24943034 THERMAL TRANSFER PRINTER 600 DPI STAND WITH CASTERS ADJUSTABLE LABEL HEAD HEIGHT AND POSITIONING

USED CODE-IN-MOTION CIM9284R-T3 PRINT AND APPLY LABELER WITH: RIGHT HAND OPERATION TAMP ARM LABEL APPLICATION LABEL DIMENSIONS: 4 INCHES WIDE X 2 INCHES TALL PRINTER: MANUFACTURER: DATAMAX-O'NEIL MODEL: DMX-A-4606 SERIAL: 10743001 THERMAL TRANSFER PRINTER 600 DPI STAND WITH CASTERS ADJUSTABLE LABEL HEAD HEIGHT AND POSITIONING

9' BY 20" ACCORDION STYLE SKATE CONVEYOR - USED SKATE CONVEYOR WITH: CONVEYOR EXTENDED DIMENSIONS: LENGTH: 9 FEET WIDTH: 20 INCHES CONVEYOR CLOSED DIMENSIONS: LENGTH: 3 FEET WIDTH: 20 INCHES INFEED HEIGHT: 30 INCHES LENGTH BETWEEN SKATES: 3 INCHES MOUNTED ON CASTERS

INGERSOLL RAND NVC200A40N THERMAL MASS DRYER - USED INGERSOLL RAND NVC200A40N AIR DRYER WITH: REMOVES HARMFUL MOISTURE FROM AN AIR SYSTEM MAWP: 230 PSIG REFRIGERANT: R404A - 2 POUNDS, 4 OUNCES DIGITAL CONTROLS TEMPERATURE DISPLAY IN FAHRENHEIT OR CELSIUS VARIABLE DEWPOINT SETTINGS AIR FLOW: 200 SCFM

SAFELINE METAL DETECTOR HEAD 3.5" HIGH X 7.5" WIDE. APERTURE OPENING: 3.5 INCHES TALL X 7.5 INCHES WIDE. STAINLESS STEEL HEAD ONLY. PUSH BUTTON CONTROLS. FOOD GRADE WASHDOWN MODEL. MOUNTED ON A STAINLESS STEEL PLATE.

RESINA U 30 699 IN-LINE 4 SPINDLE CAPPER - USED RESINA U 30 699 IN-LINE SPINDLE CAPPER WITH: 4 SPINDLE CAPPER, CAPABLE OF 6 SPINDLES WITH CHANGE PARTS (NOT INCLUDED) LEFT TO RIGHT PRODUCT FLOW ROTARY CAP SORTER AND ORIENTER WITH CHUTE CURRENT CAP DIAMETER: 1.875 INCHES CONVEYOR WIDTH: 3.5 INCHES SIDE GRIP CONVEYORS KEEP THE CONTAINER STABLE WHILE CAP IS APPLIED PAINTED, MILD STEEL FRAME

180 DEGREE HEAT SEAL ROLLER CONVEYOR WITH: CONVEYOR WIDTH: 12 INCHES INFEED HEIGHT: 42 INCHES DISCHARGE HEIGHT: 32 INCHES DISTANCE BETWEEN ROLLERS: 2 INCHES STAINLESS STEEL CONSTRUCTION MOUNTED ON CASTERS

SACMI OPERA 200RF ROLL FED WRAPAROUND GLUE LABELER: HIGH SPEED LABELING SYSTEM FOR PET, GLASS, AND METAL CONTAINERS CAN HANDLE CYLINDRICAL OR SHAPED CONTAINERS TRANSFER OF THE LABEL FROM THE CUTTING DRUM TO THE CONTAINER IS CARRIED OUT BY MEANS OF AN ALUMINUM VACUUM DRUM WITHOUT GRIPPERS OUTPUT: UP TO APPROXIMATELY 40,000 CONTAINERS PER HOUR, DEPENDING ON LABEL AND CONTAINER SIZES PREVIOUSLY USED TO LABEL COFFEE CANS: CAN DIMENSIONS: 4.25 INCH DIAMETER X 5 INCHES TALL LABEL WIDTH: 5 INCHES LABEL LENGTH: 13.35 INCHES TIMING SCREW AND STARWHEEL INFEED RIGHT TO LEFT PRODUCT FLOW 90 DEGREE TURN OUTFEED, RELATIVE TO THE INFEED STAINLESS STEEL AND FOOD GRADE CONSTRUCTION ALLEN-BRADLEY PANELVIEW PLUS 1000 HMI ALLEN-BRADLEY COMPACTLOGIX L35E CONTROLS

12 HEAD MONOBLOCK CLEANER FILLER CROWNER - USED GAI MONO 3031FM-BIER-003 STAINLESS STEEL CLEANER FILLER CROWNER WITH: THE FM BIER SERIES IS GAIS ISOBARIC FILLED MECHANICAL SERIES. FILLER FEEDING CONTROLLED BY PUMP. FILLER IS EQUIPPED WITH A LEVEL PROBE WITH ANALOGUE SIGNAL FOR FEEDING PUMP INVERTER MANAGEMENT OF THE FILLER. LIQUID ENTRANCE INCLUDES A NO-RETURN VALVE. GAS PRESSURE IN THE TANK IS MANAGED BY A PRESSURE SWITCH CONTROLLING THE GAS ENTRANCE ELECTROVALVE AND THE GAS DISCHARGE ELECTROVALVE. PRODUCTION SPEED: 600 TO 3,000 BOTTLES PER HOUR, DEPENDING ON APPLICATION GALLONS PER HOUR: 290 CURRENTLY SET UP FOR 12 OUNCE LONG NECK GLASS BOTTLES MONOBLOCK STYLE: RINSER FILLER CROWNER MECHANICAL HIGH PRESSURE NUMBER OF HEADS: RINSER: 12 FILLER: 12 CROWN CAPPER: 1 TIMING SCREW INFEED (INCHES): LENGTH: 48 FLIGHT: 2.75 ACCUMULATION CONVEYOR AREA (INCHES): LENGTH: 32 WIDTH: 17 HEIGHT: 45 OVERALL DIMENSIONS (INCHES): LENGTH: 268 WIDTH: 112 HEIGHT: 88 VIBRATING CAP FEEDER DETATCHED FOAM DISCHARGE TANK TOUCH SCREEN CONTROLS MOUNTED ON SCREW LEVELING STAINLESS STEEL CONSTRUCTION ELECTRICAL: 3 PHASE, 60 HERTZ, 220 VOLTS, 20 AMPS, 6 KW LAST APPLICATION: 12 OUNCE LONG NECK GLASS BOTTLES AT 3,000 BOTTLES PER HOUR, 750 ML CHANGE PARTS INCLUDED

COMBI PACKAGING 2EZSB TAPE BOTTOM CASE ERECTOR - USED COMBI 2EZSB CASE ERECTOR WITH: SIDE BELT DRIVE CASE ERECTING MACHINE TAPE BOTTOM SEAL 3 INCH TAPE HEAD OUTPUT: APPROXIMATELY 15 CASES PER MINUTE, DEPENDING ON CASE DIMENSIONS CASE SIZE RANGE: MINIMUM: 8 INCHES LONG X 6 INCHES WIDE X 5 INCHES TALL MAXIMUM: 24 INCHES LONG X 16 INCHES WIDE X 18 INCHES TALL EZ LOAD WALK-IN CASE MAGAZINE HEAVY-DUTY WELDED STEEL CONSTRUCTION

[ABB FLEX PICKER ROBOTIC PICK AND PLACE CASE PACKER] WITH: PICK CAPABILITIES: UP TO 150 PICKS PER MINUTE, DEPENDING ON APPLICATION MAXIMUM SPEED: 10 METERS PER SECOND (6) UP WORKING DIAMETER: 1130 MILLIMETERS UNLIMITED ROTATION CAPABILITIES REACH: 1500 MILLIMETERS APPLICATIONS: MEAT PROCESSING PACKAGING APPROXIMATE OVERALL DIMENSIONS: LENGTH: 5 FEET WIDTH: 6 FEET HEIGHT: 88 INCHES ELECTRICAL REQUIREMENTS: 400 VOLTS, 60 HERTZ, 3 PHASE

2000 BLUEPRINT AUTOMATION TAPE BOTTOM SEAL CASE ERECTOR WITH: 2 INCH TAPE HEAD BOTTOM SEAL ALLEN-BRADLEY PANELVIEW PLUS 700 HMI PERSONNEL GUARDING MANUAL SWITCHES

COMBI PACKAGING 2EZPSB TAPE BOTTOM CASE ERECTOR WITH MAGAZINE. PRODUCTION OUTPUT RATE: APPROXIMATELY 12 CASES PER MINUTE, DEPENDING ON CASE SIZE. MINIMUM CASE SIZE: 6 LENGTH X 4.5 WIDTH X 4.5 HEIGHT (INCHES). MAXIMUM CASE SIZE: 20 LENGTH X 16 WIDTH X 18 HEIGHT (INCHES). BOTTOM TAPE HEAD: 2 INCHES. VACUUM BLANK CARTON PICK-OFF. POWER SUPPLY: 120 VOLTAGE / 1 PHASE / 60 HERTZ.

SOUTHERN CALIFORNIA PACKAGING ST1100 LABELER WITH: SPEED: UP TO 1,100 LINEAR INCHES PER MINUTE WEB WIDTH: 6 INCHES CONVEYOR DIMENSIONS: WIDTH: 6 INCHES LENGTH: 92 INCHES LABEL SIZE: MINIMUM: WIDTH: 0.5 INCHES LENGTH: 0.5 INCHES MAXIMUM: WIDTH: 6 INCHES LENGTH: 18 INCHES CORE DIAMETER: 1 INCH MOUNTED ON CASTERS PUSH-BUTTON CONTROLS WITH DIGITAL READOUT ELECTRICAL REQUIREMENTS: 120 VOLTS, 60 HERTZ, SINGLE PHASE

POSITIVE DISPLACEMENT PUMP WITH 3/4 HORSEPOWER MOTOR ON STAINLESS STEEL CART - USED POSITIVE DISPLACEMENT PUMP WITH: 0.75 HORSEPOWER MOTOR STAINLESS STEEL CART (4) CASTER WHEELS ELECTRICAL REQUIREMENTS: VOLTS: 90 AMPS: 7.60

RESINA NRC40 8 HEAD INLINE SPINDLE CAPPER WITH CAP HOPPER AND DUAL GRIPPER BELTS - USED RESINA SPINDLE CAPPER WITH: 8 SPINDLES CURRENTLY SET UP TO RUN 43 TO 53 MILLIMETER CAPS OUTPUT: UP TO 300 CAPS PER MINUTE DEPENDING ON CAP SIZE CAP SIZE RAGE: MINIMUM: 15 MILLIMETERS MAXIMUM: 70 MILLIMETERS DUAL GRIPPER PRODUCT BELTS

[ADMIX 112RS70SS] HIGH-SHEAR MIXER WITH G&F 80 GALLON STAINLESS STEEL TANK. CAPACITY: 80 GALLONS BOTTOM CENTER OUTLET DIAMETER: 1.5 INCHES TWO-PIECE STAINLESS STEEL HINGE COVER TOP INLET DIAMETER: 2 INCHES DUAL JETFOIL HIGH-FLOW IMPELLER (4) BLADE DIAMETER: 4 INCHES STAINLESS STEEL CONSTRUCTION TOP MOUNTED MOTOR: 7.5 HORSEPOWER, 3450 RPM ELECTRICAL: 230/460 VOLTS, 60 HZ, PHASE 3

[USED] 3M-MATIC 77RKS RANDOM CASE TAPER WITH: OUTPUT: UP TO 20 CASES PER MINUTE, DEPENDING ON MATERIALS AND APPLICATION MINIMUM CASE DIMENSIONS: LENGTH: 6 INCHES WIDTH: 7 INCHES HEIGHT: 4.75 INCHES MAXIMUM CASE DIMENSIONS: LENGTH: UNLIMITED WIDTH: 25.5 INCHES HEIGHT: 36 INCHES 3 INCH TAPE HEAD ELECTRICAL REQUIREMENTS: 115 VOLTS, 60 HERTZ, 1 PHASE APPROXIMATE OVERALL DIMENSIONS: LENGTH: 5 FEET WIDTH: 3 FEET HEIGHT: 5 FEET

UNIVERSAL TA4 WRAPAROUND PRESSURE SENSITIVE LABELER CONTOURED PRODUCT CAPABLE - USED UNIVERSAL TA4 WRAP UNIT LABELER WITH: SPEED: UP TO 3000 INCHES PER MINUTE (DEPENDING ON PRODUCT SPECIFICATIONS) TILTING HOLD DOWN PLATE CAN BE ADJUSTED FOR CONTOURED PRODUCTS FILM CORE: 3 INCHES MAXIMUM FILM WIDTH: 6 INCHES GRIPPER BELT HEIGHT: 4 INCHES CONVEYOR DIMENSIONS: LENGTH: 120 INCHES WIDTH: 6 INCHES ANALOG DIAL CONTROLS MOUNTED ON CASTERS ELECTRICAL: 115 VOLTS, SINGLE PHASE, 60 HZ

TEXWRAP TLS-2219MP INTERMITTENT MOTION L-SEAL SYSTEM - TEXWRAPS TLS SERIES L-SEALERS SIMULTANEOUSLY MAKE THE END AND SIDE SEAL OF ONE PACKAGE, AS WELL AS THE FRONT SEAL OF THE TRAILING PACKAGE. THE SEAL IS MADE BY FEEDING PRODUCT INTO THE CENTERFOLD FILM WITH PHOTO-EYES DETECTING THE LEADING AND TRAILING EDGE OF THE PRODUCT. L-SEALERS FIT APPLICATIONS WHERE SPEEDS ARE SLOW TO MODERATE OR WHERE SPACE IS LIMITED, AND ARE AFFORDABLE, VERSATILE WRAPPERS WITHIN A CERTAIN RANGE OF PRODUCT SIZES. THE L-SEALER DESIGN ALSO INCLUDES A FULLY AUTOMATIC PRODUCT INDEXING & PACKAGE LENGTH ADJUSTMENT BY EITHER HORIZONTAL OR VERTICAL ELECTRIC EYE TO ACCOMMODATE MOST PACKAGE CONFIGURATIONS, PLUS LOW-MOUNT FILM CRADLE, SWIVEL OPERATOR PANEL, AND TOUCHSCREEN RECIPE LIBRARY TO EASILY RECALL PACKAGE SETUPS. THE STANDARD ALLEN BRADLEY PLC & HMI INTERFACE ASSURES USER FRIENDLY, RELIABLE OPERATION USED TEXWRAP TLS-2219 L-BAR WRAPPER WITH: CAPACITY: UP TO 50 PIECES PER MINUTE, DEPENDING ON INFEED AND PRODUCT. MAXIMUM PACKAGE SIZE: 9H X 15.5W X 19L (STANDARD) 7H X 15.5W X 19L (WITH CLOSING CONVEYOR OPTION) MINIMUM PACKAGE SIZE: 4L X 2.75 W (STANDARD) 2L X 2.75 W (WITH CLOSING CONVEYOR OPTION) FILM WIDTH: MAXIMUM: 28 CENTER FOLDED MINIMUM: 6 CENTER FOLDED OPTIONAL 64 FOLDER ATTACHMENT WITH 32 UNWIND CONVEYOR SPEED: 20 TO 100 FEET PER MINUTE AUTOMATIC REVERSING BELT MOTION TRIM TECHHNOLOGY ALLEN-BRADLEY PLC AIR REQUIREMENTS: 80 PSI, 4 CFM ELECTRICAL REQUIREMENTS: 240 VOLTS 60 HZ SINGLE PHASE HEAVY-DUTY WELDED TUBULAR STEEL STANDARD

BERTOLASO SIGMA 605/605 STAINLESS STEEL ROTARY CAPPER - USED BERTOLASO SIGMA STAINLESS STEEL ROTARY FILLER: PRODUCTION SPEED: 75 CAPS PER MINUTE CAP SIZE: 28 MILLIMETER INFEED HEIGHT: 41 INCHES CONVEYOR WIDTH: 5 INCHES SCREW DIMENSIONS: FLIGHT: 4 INCHES LENGTH: 23 INCHES STAR WHEEL INFEED STAINLESS STEEL CONSTRUCTION ELECTRICAL: 480 VOLTS, 60 HERTZ, 3 PHASE LAST BOTTLE SIZES RAN: 100-500 MILLILITERS

INLINE FILLING SYSTEMS COMPUTORQUE STAINLESS STEEL AUTOMATIC CAPPING SYSTEM - USED INLINE FILLING SYSTEM AUTOMATIC CAPPING SYSTEM WITH: CURRENT CAP SIZE: 24 MM CAP TIGHTENING BELT DIMENSIONS: LENGTH: 10.5 INCHES HEIGHT: 0.75 INCHES VARIABLE SPEED CONTROLS CAP FEEDER DIAMETER: 24 INCHES HOPPER DIMENSIONS: LENGTH: 22 INCHES WIDTH: 13.5 INCHES DEPTH: 22 INCHES GRIPPER BELT DIMENSIONS: LENGTH: 28 INCHES HEIGHT: 0.75 INCHES ADJUSTABLE HEIGHT LEGS STAINLESS STEEL CONSTRUCTION PNEUMATIC REQUIREMENTS: 80 PSI AT 7 CUBIC FEET PER MINUTE MOTOR: 0.5 HORSEPOWER, 1725 RPM ELECTRICAL: 110 VOLTS, 50/60 HZ

EASTEY ETTH2012 SHRINK TUNNEL 20" W X 12" TALL - USED EASTEY ETTH2012 SHRINK TUNNEL WITH: APERTURE DIMENSIONS: 20 INCHES WIDE X 12 INCHES TALL CONVEYOR DIMENSIONS: 70 INCHES LONG X 12 INCHES WIDE STEEL WIRE CONVEYOR BELT DIGITAL TEMPERATURE CONTROLS VARIABLE SPEED CONVEYOR PAINTED, MILD STEEL CONSTRUCTION CASTERS

USED PESTER PEWO FORM UVP3 ECONOMICAL CASE PACKER WITH: SPEED: UP TO 12 CASES PER MINUTE, DEPENDING ON MATERIALS AND APPLICATION PRODUCT INFEED CONVEYOR: 79 X 8 X 35 INCHES [LXWXH] SEALING METHOD: 2 INCH TAPE HEADS CASE SIZE: [LXWXH] MINIMUM: 150 X 120 X 105 MILLIMETERS MAXIMUM: 600 X 400 X 400 MILLIMETERS PRODUCT SIZE: [LXWXH] MINIMUM: 30 X 12 X 66 MILLIMETERS MAXIMUM: 440 X 150 X 250 MILLIMETERS DISCHARGE CONVEYOR: 79 X 25 X 38 INCHES [LXWXH]

87" L BY 10" W GRAVITY ROLLER CONVEYOR - USED GRAVITY ROLLER CONVEYOR WITH: CONVEYOR DIMENSIONS: LENGTH: 87 INCHES WIDTH: 10 INCHES INFEED HEIGHT: 36 INCHES DISCHARGE HEIGHT: 28 INCHES MOUNTED ON CASTERS STAINLESS STEEEL CONSTRUCTION

MEHEEN 6 HEAD FILLER/CROWNER - USED MEHEEN FILLER/CROWNER 6 HEAD FILLER/CROWNER SPEEDS: UP TO 36 BOTTLES PER MINUTE:DEPENDING ON APPLICATIONS AND SIZES RINSE RACK HOPPER DELIVERS CROWNS TO CROWNER BAR FOR FULLY AUTOMATED INDEXING AND CRIMPING COUNTER PRESSURE FILLING WITH CO2 PRE-PURGE TOUCH SCREEN CONTROLS ELECTRICAL: 115/240 FREQUENCY: 60 HZ PHASE 3 REQUIRED AIR: 40 PSI CURRENT SET UP: 22 OUNCE GLASS BOTTLES

NATIONAL BULK EQUIPMENT NBE CHAIN DRIVEN ROLLER CONVEYOR 175" L X 46" W. CONVEYOR DIMENSIONS: 175 INCHES LONG X 46 INCHES WIDE. CONVEYOR HEIGHT: 20 INCHES. ROLLER DIAMETER: 2.5 INCHES. ROLLER CENTERS: 4.5 INCHES. (3) .75 HORSEPOWER MOTORS. STAINLESS STEEL CONSTRUCTION. SHAKER SECTION.

SAFELINE SL 2000 14" X 5" METAL DETECTOR WITH CONVEYOR. SMOOTH TROUGH STYLE CONVEYOR BELT. APERTURE DIMENSIONS: 14 INCHES WIDE X 5 INCHES TALL. EFFECTIVE APERTURE HEIGHT: 2.5 INCHES. CONVEYOR DIMENSIONS: 12 INCHES WIDE X 70 INCHES LONG. CONVEYOR HEIGHT: APPROXIMATELY 32 INCHES. 0.5 HORSEPOWER MOTOR. STAINLESS STEEL FRAME AND METAL DETECTOR HEAD. LEFT TO RIGHT PRODUCT FLOW.

APACKS 36" ROTARY ACCUMULATION TABLE WITH: DIAMETER: 36 INCHES, VARIABLE SPEED DRIVE, ADJUSTABLE GUIDE RAILS, CURRENT INFEED HEIGHT: 36 INCHES, MOUNTED ON ADJUSTABLE LEGS, STAINLESS STEEL CONSTRUCTION

ECONOCORP ECONOSEAL CASER 9240 STAINLESS STEEL SIDE-LOAD CASE PACKER - USED ECONOSEAL 9240 CASE PACKER WITH: OUTPUT: UP TO 10 CASES PER MINUTE, DEPENDING ON CASE SIZE AND OTHER FACTORS CASE SIZE RANGE: MINIMUM: 8 INCHES X 6 INCHES X 4 INCHES MAXIMUM: 24 INCHES X 16 INCHES X 18 INCHES 2 INCH TAPE HEAD CASE CLOSURE HORIZONTAL CASE PACKER CARTON UP-STACKING INFEED SIDE CASE LOADING SANITARY CONSTRUCTION SINGLE LOAD STATION AIR REQUIREMENTS: 5.5 BAR, 95 L/MIN ELECTRICAL REQUIREMENTS: 220 VOLTS 60 HZ 3 PHASE HEAVY DUTY, WELDED STAINLESS STEEL FRAME

SOUTHERN CALIFORNIA ST1100 PRESSURE SENSITIVE LABELER - USED SOUTHERN CALIFORNIA ST1100 LABELER WITH: SPEED: UP TO 1,100 LINEAR INCHES PER MINUTE WEB WIDTH: 6 INCHES CONVEYOR DIMENSIONS (MISSING BELT): WIDTH: 6 INCHES LENGTH: 92 INCHES LABEL SIZE: MINIMUM: WIDTH: 0.5 INCHES LENGTH: 0.5 INCHES MAXIMUM: WIDTH: 6 INCHES LENGTH: 18 INCHES CORE DIAMETER: 1 INCH MOUNTED ON CASTERS PUSH-BUTTON CONTROLS WITH DIGITAL READOUT ELECTRICAL REQUIREMENTS: 120 VOLTS, 60 HERTZ, SINGLE PHASE

LEE D9MSI STAINLESS JACKETED KETTLE 300 GALLONS - USED LEE D9MSI KETTLE WITH: CAPACITY: 300 GALLONS NATIONAL BOARD NUMBER: 8409 MAWP: 90 PSI AT 332 DEGREES FAHRENHEIT MDMT: -20 DEGREES FAHRENHEIT AT 90 PSI INFEED HEIGHT: 93 INCHES DISCHARGE DIAMETER: 4 INCHES DISCHARGE HEIGHT: 36 INCHES 316 STAINLESS STEEL CONTACT PARTS