Pelleting Equipment Auction MULTISITE with 500 Lots 2017 Complete Wood Pellet Line

2019 COLORADO MILL R150 PELLET MILL WITH 200HP MAIN MOTOR, MADE IN USA, NEVER INSTALLED, 1/4" DIE, FEEDER, CONDITIONER, FORCE FEEDER, STAINLESS DOOR, KNIFE POST, CAN BE USED FOR WOOD, ALFALFA, PLASTICS, FEED ETC.

2017 COLORADO MILL EQUIPMENT R150 PELLET MILL WITH FEEDER, CONDITIONER, FORCE FEEDER, DIE, AND ROLLS, NEW IN 2017...SET UP FOR GRILLING PELLETS. PRODUCTION RATE: PRODUCED 44,000 LBS OF PELLETS PER WEEK+. MACHINE IS CAPABLE OF MORE BUT PRODUCTION WAS ONLY 2-3 DAYS PER WEEK / 1 SHIFT. MACHINE CAN BE UPDATED REMOTELY AND HAS A CAT5 PLC ALLOWING FOR PROGRAM CHANGES. ORIGINAL AIR CONVEYOR REPLACED WITH SCREW CONVEYOR FOR BETTER PROCESSING. HOLDING SILOS CAN HOLD 2 DIFFERENT TYPES OF WOOD FOR % BLEND AS NEEDED BASED ON SCREW SUPPLY SPEED. USED TO PRODUCE HICKORY AND MESQUITE BLENDED PELLETS. CAN BE FED BOTH DRIED CHIPPED AND WHOLE LOGS FOR WOOD SUPPLY VIA 250 HP HAMMER MILL WITH SECONDARY 50 HP HAMMER MILL.

2017 RAD BUCKET ELEVATOR WITH TRANSITION CONVEYOR TO COOLER, APPROX 14'

COLORADO MILL EQUIPMENT C3 COUNTER FLOW PELLET COOLER WITH BUILT IN AIR SYSTEM AND AIRLOCK. ORIGINAL AIR CONVEYOR REPLACED WITH SCREW CONVEYOR FOR BETTER PROCESSING. HOLDING SILOS CAN HOLD 2 DIFFERENT TYPES OF WOOD FOR % BLEND AS NEEDED BASED ON SCREW SUPPLY SPEED. MACHINE IS CAPABLE OF MORE BUT PRODUCTION WAS ONLY 2-3 DAYS PER WEEK / 1 SHIFT. MACHINE CAN BE UPDATED REMOTELY AND HAS A CAT5 PLC ALLOWING FOR PROGRAM CHANGES. USED TO PRODUCE HICKORY AND MESQUITE BLENDED PELLETS. CAN BE FED BOTH DRIED CHIPPED AND WHOLE LOGS FOR WOOD SUPPLY VIA 250 HP HAMMER MILL WITH SECONDARY 50 HP HAMMER MILL PRODUCTION RATE: PRODUCED 44,000 LBS OF PELLETS PER WEEK+.

2017 BULKTECH SAWDUST BIN WITH RAD AUGER AND STAND.

TORIT DUST COLLECTOR ABOVE SAWDUST BIN (SAWDUST BIN NOT INCLUDED)

INCLINE BELT CONVEYOR FOR PICKING UP PELLETS. 250 HP HAMMER MILL WITH SECONDARY 50 HP HAMMER MILL. PRODUCTION RATE: PRODUCED 44,000 LBS OF PELLETS PER WEEK+. ORIGINAL AIR CONVEYOR REPLACED WITH SCREW CONVEYOR FOR BETTER PROCESSING. HOLDING SILOS CAN HOLD 2 DIFFERENT TYPES OF WOOD FOR % BLEND AS NEEDED BASED ON SCREW SUPPLY SPEED. MACHINE IS CAPABLE OF MORE BUT PRODUCTION WAS ONLY 2-3 DAYS PER WEEK / 1 SHIFT. MACHINE CAN BE UPDATED REMOTELY AND HAS A CAT5 PLC ALLOWING FOR PROGRAM CHANGES.

2017 RAD U-TROUGH CONVEYOR FROM COOLER TO BUCKET ELEVATOR

2017 RAD BUCKET ELEVATOR FOR LOADING BAGGING BIN

BULKTECH BAGGING STATION ON LEGS WITH COLORADO MILL EQUIPMENT BSM BAGGER

2017 COLORADO MILL EQUIPMENT SLR CONTINUOUS HOT AIR SEALER WITH BAG STAND AND 6' BELT CONVEYOR, MOUNTED ON ADJUSTABLE HEIGHT TRIPOD STAND WITH CASTORS

250 HP HAMMER MILL WITH SECONDARY 50 HP HAMMER MILL PRODUCTION RATE: PRODUCED 44,000 LBS OF PELLETS PER WEEK+. MACHINE IS CAPABLE OF MORE BUT PRODUCTION WAS ONLY 2-3 DAYS PER WEEK / 1 SHIFT. MACHINE CAN BE UPDATED REMOTELY AND HAS A CAT5 PLC ALLOWING FOR PROGRAM CHANGES. ORIGINAL AIR CONVEYOR REPLACED WITH SCREW CONVEYOR FOR BETTER PROCESSING. HOLDING SILOS CAN HOLD 2 DIFFERENT TYPES OF WOOD FOR % BLEND AS NEEDED BASED ON SCREW SUPPLY SPEED.

WEST SALEM 4032B WOOD HOG 250HP APPROX 46LBS SWINGING HAMMERS MOUNTED ON A STAND. ORIGINAL AIR CONVEYOR REPLACED WITH SCREW CONVEYOR FOR BETTER PROCESSING. HOLDING SILOS CAN HOLD 2 DIFFERENT TYPES OF WOOD FOR % BLEND AS NEEDED BASED ON SCREW SUPPLY SPEED. MACHINE IS CAPABLE OF MORE BUT PRODUCTION WAS ONLY 2-3 DAYS PER WEEK / 1 SHIFT. MACHINE CAN BE UPDATED REMOTELY AND HAS A CAT5 PLC ALLOWING FOR PROGRAM CHANGES.

BULKTECH BULK CHIP BIN WITH AUGER WITH STAND

2017 BULKTECH RAW MATERIAL BULK BIN, NEW APPROX 2017

2017 RAD U-TROUGH AUGER: DALLAS,TX RAD U-TROUGH AUGER, BUILT IN 2017. USED TO PRODUCE HICKORY AND MESQUITE BLENDED PELLETS. CAN BE FED BOTH DRIED CHIPPED AND WHOLE LOGS FOR WOOD SUPPLY VIA 250 HP HAMMER MILL WITH SECONDARY 50 HP HAMMER MILL PRODUCTION RATE: PRODUCED 44,000 LBS OF PELLETS PER WEEK+. MACHINE IS CAPABLE OF MORE BUT PRODUCTION WAS ONLY 2-3 DAYS PER WEEK / 1 SHIFT. MACHINE CAN BE UPDATED REMOTELY AND HAS A CAT5 PLC ALLOWING FOR PROGRAM CHANGES. ORIGINAL AIR CONVEYOR REPLACED WITH SCREW CONVEYOR FOR BETTER PROCESSING. HOLDING SILOS CAN HOLD 2 DIFFERENT TYPES OF WOOD FOR % BLEND AS NEEDED BASED ON SCREW SUPPLY SPEED. NOTE TO BIDDER -- THIS LINE IS PLC CONTROLLED AND SHOULD BE SOLD AS BULK TO CONTINUE OPERATING IN CURRENT FORM. IF LOTS ARE SOLD PIECE-MEAL -- CONTROLS MAY NOT BE INCLUDED -- AND ADDITIONAL CONTROL PANELS MAY BE NEEDED TO CONTROL INDIVIDUAL MACHINES.

INCLINE BELT CONVEYOR APPROX 18" X APPROX 20' WITH MAGNET STATIONS

2017 DALLAS, TX RAD SHORT U-TROUGH AUGER. USED TO PRODUCE HICKORY AND MESQUITE BLENDED PELLETS. CAN BE FED BOTH DRIED CHIPPED AND WHOLE LOGS FOR WOOD SUPPLY VIA 250 HP HAMMER MILL WITH SECONDARY 50 HP HAMMER MILL. PRODUCTION RATE: PRODUCED 44,000 LBS OF PELLETS PER WEEK+. MACHINE IS CAPABLE OF MORE BUT PRODUCTION WAS ONLY 2-3 DAYS PER WEEK / 1 SHIFT. MACHINE CAN BE UPDATED REMOTELY AND HAS A CAT5 PLC ALLOWING FOR PROGRAM CHANGES. ORIGINAL AIR CONVEYOR REPLACED WITH SCREW CONVEYOR FOR BETTER PROCESSING. HOLDING SILOS CAN HOLD 2 DIFFERENT TYPES OF WOOD FOR % BLEND AS NEEDED BASED ON SCREW SUPPLY SPEED. NOTE TO BIDDER -- THIS LINE IS PLC CONTROLLED AND SHOULD BE SOLD AS BULK TO CONTINUE OPERATING IN CURRENT FORM. IF LOTS ARE SOLD PIECE-MEAL -- CONTROLS MAY NOT BE INCLUDED -- AND ADDITIONAL CONTROL PANELS MAY BE NEEDED TO CONTROL INDIVIDUAL MACHINES.

SPROUT 2212 50HP TEAR DROMP HAMMERMILL WITH STAND. ORIGINAL AIR CONVEYOR REPLACED WITH SCREW CONVEYOR FOR BETTER PROCESSING. HOLDING SILOS CAN HOLD 2 DIFFERENT TYPES OF WOOD FOR % BLEND AS NEEDED BASED ON SCREW SUPPLY SPEED. 250 HP HAMMER MILL WITH SECONDARY 50 HP HAMMERMILL. PRODUCTION RATE: PRODUCED 44,000 LBS OF PELLETS PER WEEK+. MACHINE IS CAPABLE OF MORE BUT PRODUCTION WAS ONLY 2-3 DAYS PER WEEK / 1 SHIFT. MACHINE CAN BE UPDATED REMOTELY AND HAS A CAT5 PLC ALLOWING FOR PROGRAM CHANGES.

BLOWER FOR DUST COLLECTOR

2017 RAD BUCKET ELEVATOR, APPROX 16'

LARGE PULSJET TYPE DUSTCOLLECTOR BAGHOUSE

DALLAS, TX PRECISION VIBRATORY CONVEYOR USED TO UNLOAD BULK BIN (LOT DOES NOT INCLUDE BIN ABOVE UNIT: DALLAS,TX PRECISION VIBRATORY CONVEYOR USED TO UNLOAD BULK BIN (LOT DOES NOT INCLUDE BIN ABOVE)

2017 CME R150 200HP PELLETMILL, FEED BINS, CONVEYORS, WEST SALEM WOOD HOG, SPROUT HAMMERMILL, CME C3 COUNTERFLOW COOLER WITH AIR SYSTEM, BAGGING BIN, SEALER, BLOWERS, DUST COLLECTORS, AND CONTROLS (INCLUDES 101 -125).

SPROUT PELLET MILL 32" DIE

SPROUT PELLET MILL 32" DIE, NEW REPLACEMENT COST APPROXIMATELY $5,000

LOT CRATE OF ROLL SHAFT PARTS

SPROUT PELLET MILL 32" DIE

MISC SCREENS FOR HAMMERMILLS

CPM PELLET MILL BASES

LARGE PELLET MILL BASE FOR 9000 SERIES PELLET MILL OR SIMILAR

CANON CITY CO CPM 22 PELLET MILL GEARBOX CASE, NEW REPLACEMENT

CONVEYOR SHAFT

MISC ROLLS OF INSULATION

ANDRITZ PM919 PELLET MILL DIE APPROX 5/32 HOLES, NEW REPLACEMENT COST APPROXIMATELY $8,000

AIR DIFFUSING CONE

SPROUT 501 36" 10 GROOVE PULLEY FOR SPROUT 501, NEW REPLACEMENT COST APPROXIMATELY $5,000

BELT CONVEYER WITH DRIVE MISSING BELTING

CANON CITY CO HEAVY DUTY STEEL BASES

CANON CITY CO DUCTWORK ETC

DAYTON CONTROLS FOR VIBRATION ANALYZER

2019 IEC 3000 INDUSTRIAL HEMP DRYER: 1000-3000 LBS OF FRESH BIOMASS PER HOUR. ADVANCED PLC/MCC CONTROL SET. DASHBOARD OPERATING SYSTEM. LARGE 15" ANIMATED TOUCH-SCREEN INTERFACE. PLC AND MCC DELIVERED PRE-WIRED. REMOTE CAMERA MONITORING SYSTEM. INTERNET CONNECTION NEEDED. LESS THAN 2-MINUTE DRY TIME! DESIGNED FOR CONTINUOUS FEED. BIOMASS NEVER STOPS MOVING WITHIN THE SYSTEM. PROPANE OR NATURAL GAS BURNERS. PROTECTION AND STABILIZATION OF YOUR HEMP CROP. LOW-TEMPERATURE OPERATIONS WITH NO EXCESSIVE LOSS OF CANNABINOIDS OR TERPENES! ALL PARTS MANUFACTURED 100% IN THE U.S.A. SIGNIFICANT REDUCTION IN LABOR AND SQUARE FOOTAGE REQUIREMENTS. NO NEED TO HANG DRY! THE FLEXIBILITY OF MODULAR DRYING SYSTEMS TO MEET CURRENT DEMAND AND FUTURE GROWTH. ADVANCED PLC/MCC CONTROL SET. DASHBOARD OPERATING SYSTEM. LARGE 15" ANIMATED TOUCH-SCREEN INTERFACE. PLC AND MCC DELIVERED PRE-WIRED. REMOTE CAMERA MONITORING SYSTEM. INTERNET CONNECTION NEEDED. LESS THAN 2-MINUTE DRY TIME! DESIGNED FOR CONTINUOUS FEED. BIOMASS NEVER STOPS MOVING WITHIN THE SYSTEM. PROPANE OR NATURAL GAS BURNERS. NOTE: ANTICIPATED DRYER CAPACITIES ARE BASED ON DISCRETE, FREE FLOWING FEED, AMBIENT AIR TEMPERATURES (65F), AND PROPER USAGE OF THE DRYER EQUIPMENT. FURTHER SPECIFICATIONS ARE OUTLINED AND REFERENCED IN OUR PROPOSAL MATERIALS. EXCESSIVELY WET FEED, 80%+ MOISTURE CONTENT, IMPROPER FEEDING OF THE DRYER, OR FEED THAT IS NOT WITHIN SPECIFICATIONS MAY FURTHER IMPACT THE ANTICIPATED CAPACITIES OF THE DRYING SYSTEMS.

DALLAS, TX FINES RETURN AUGER FROM AIRLOCK TO PELLET MILL: USED TO PRODUCE HICKORY AND MESQUITE BLENDED PELLETS. CAN BE FED BOTH DRIED CHIPPED AND WHOLE LOGS FOR WOOD SUPPLY VIA 250 HP HAMMER MILL WITH SECONDARY 50 HP HAMMER MILL PRODUCTION RATE: PRODUCED 44,000 LBS OF PELLETS PER WEEK+. MACHINE IS CAPABLE OF MORE BUT PRODUCTION WAS ONLY 2-3 DAYS PER WEEK / 1 SHIFT. MACHINE CAN BE UPDATED REMOTELY AND HAS A CAT5 PLC ALLOWING FOR PROGRAM CHANGES. ORIGINAL AIR CONVEYOR REPLACED WITH SCREW CONVEYOR FOR BETTER PROCESSING. HOLDING SILOS CAN HOLD 2 DIFFERENT TYPES OF WOOD FOR % BLEND AS NEEDED BASED ON SCREW SUPPLY SPEED. NOTE TO BIDDER -- THIS LINE IS PLC CONTROLLED AND SHOULD BE SOLD AS BULK TO CONTINUE OPERATING IN CURRENT FORM. IF LOTS ARE SOLD PIECE-MEAL -- CONTROLS MAY NOT BE INCLUDED -- AND ADDITIONAL CONTROL PANELS MAY BE NEEDED TO CONTROL INDIVIDUAL MACHINES.