bidseek.com
2005 HAAS VF-3SS SUPER SPEED CNC VERTICAL MILL W/ SIDE-MOUNT TOOL CHANGER & ACCU-LUBE. SPECIFICATIONS: MODEL: VF-3SS (SUPER SPEED) DATE...more
Details
| Year | 2005 |
| Make | HAAS |
| Model | VF-3SS |
| Serial # | 45619 |
| Buyer's Premium | 18% |
| Quantity | 1 |
Auction Information
Auctioneer
🔒
Auction
🔒
Category
CNC MACHINE CENTERS
Location
🔒
Sold
🔒
Description
2005 HAAS VF-3SS SUPER SPEED CNC VERTICAL MILL W/ SIDE-MOUNT TOOL CHANGER & ACCU-LUBE. SPECIFICATIONS: MODEL: VF-3SS (SUPER SPEED) DATE OF MFG: 11 / 05 X-AXIS TRAVEL: 40.0" (1016 MM) Y-AXIS TRAVEL: 20.0" (508 MM) Z-AXIS TRAVEL: 25.0" (635 MM) SPINDLE NOSE TO TABLE (MIN - MAX): 4.2" - 29.2" (107 MM - 742 MM) TABLE LENGTH: 48.0" (1219 MM) TABLE WIDTH: 18.0" (457 MM) MAX WEIGHT ON TABLE (EQUALLY DISTRIBUTED): 1,750 LBS (794 KG) T-SLOTS WIDTH: 5/8" (16 MM) T-SLOTS CENTER DISTANCE: 4.92" (125 MM) MAX SPINDLE SPEED: 12,000 RPM DRIVE SYSTEM: INLINE DIRECT-DRIVE SPINDLE MOTOR MAX RATING: 30.0 HP (22.4 KW) VECTOR DRIVE MAX TORQUE: 90 FT-LB @ 2,000 RPM SPINDLE TAPER: CAT 40 RAPID TRAVERSE (X, Y, Z AXES): 1,400 IPM (35.6 M/MIN) MAX CUTTING FEEDRATE: 833 IPM (21.2 M/MIN) AXIS THRUST (X, Y AXES): 3,085 LBF (13,723 N) AXIS THRUST (Z AXIS): 3,923 LBF (17,450 N) TOOL CHANGER CAPACITY: 24+1 POSITION SIDE-MOUNT (SMTC) MAX TOOL DIAMETER (FULL): 3.0" (76 MM) MAX TOOL WEIGHT: 12 LBS (5.4 KG) TOOL-TO-TOOL TIME (AVERAGE): 1.6 - 2.8 SECONDS CHIP-TO-CHIP TIME (AVERAGE): 2.2 - 3.6 SECONDS VOLTAGE: 208 / 230 VAC PHASE: 3 FREQUENCY: 50 / 60 HZ FULL LOAD AMPERAGE: 80 AMPS LARGEST LOAD AMPERAGE: 70 AMPS SHORT CIRCUIT INTERRUPTING CAPACITY: 10,000 AMPS WIRING DIAGRAM: 93-8100 AIR REQUIRED: 4 SCFM @ 100 PSI (113 L/MIN @ 6.9 BAR) COOLANT CAPACITY: 55 GALLON (208 LITERS) MACHINE WEIGHT: APPROX. 12,500 LBS (5,670 KG) COUNTRY OF MANUFACTURE: MADE IN U.S.A. MACHINE RUN HOURS: SERVO TIME: 941:40:50 HOURS MOTION TIME: 151:09:06 HOURS SPINDLE TIME: 135:22:36 HOURS EQUIPPED WITH: HAAS CNC CONTROL PANEL INTERFACE W/ JOG HANDWHEEL 24+1 STATION SIDE-MOUNT AUTOMATIC TOOL CHANGER ASSEMBLY ACCU-LUBE MINIMAL QUANTITY LUBRICATION / PRECISION APPLICATOR SYSTEM ENCLOSED WORK COMPARTMENT LIGHT BAR 4TH AXIS READY (INTERNAL BRUSH-TYPE DRIVE BOARD AND WIRING HARNESS PRE-INSTALLED NOTE: 4TH AXIS ROTARY TABLE UNIT IS NOT INCLUDED) S/N: 45619
...more
Comparable Summary
iShowing past sales matching this item
Loading comparables…
×
❮
![Full size photo]()
❯
Disclaimer: BidSeek aggregates publicly available auction and liquidation results from independent third-party sources for research and valuation reference only. BidSeek is not affiliated with, endorsed by, sponsored by, or operated in connection with any auction house, marketplace, or liquidation firm. All data and images are provided as-is for informational purposes and remain the property of their respective owners.