2023 OKUMA GENOS M560-V VERTICAL MACHINING CENTER, VMC X-AXIS TRAVEL: 1,050 MM (41.34 INCH) Y-AXIS TRAVEL: 560 MM (22.05 INCH)...more

2023 OKUMA GENOS M560-V VERTICAL MACHINING CENTER, VMC X-AXIS TRAVEL: 1,050 MM (41.34 INCH) Y-AXIS TRAVEL: 560 MM (22.05 INCH) Z-AXIS TRAVEL: 460 MM (18.11 INCH) TABLE UPPER FACE TO SPINDLE NOSE: 150 TO 610 MM (5.91 TO 24.02 INCH) COLUMN FRONT TO SPINDLE CENTER: 720 MM (28.35 INCH) WORKING AREA: 560 X 1,300 MM (22.05 X 51.18 INCH) TABLE SIZE: 560 X 1,300 MM (22.05 X 51.18 INCH) TABLE SURFACE: 18 MM (0.71 INCH) WIDE T-SLOTS X 4 (PITCH: 125 (4.92 INCH)) TABLE SURFACE TO FLOOR: 800 MM (31.50 INCH) LOAD CAPACITY: 900 KG (1,980 LB) SPEED RANGE (STANDARD): 50 TO 8,000 MIN1 TAPERED BORE: 7/24 TAPER NO. 40 BEARING ID: 70 (2.76)/8,000, 12,000, 15,000 MM (INCH) TORQUE/BASE SPEED: 198 (146)/530 N-M (LBF-FT)/MIN1 MAX SPEED (OPTIONAL): 12,000, 15,000 MIN1 TORQUE/BASE SPEED (OPTIONAL): 199 (147)/720 N-M (LBF-FT)/MIN1 RAPID TRAVERSE: X, Y: 40 (1,574.80), Z: 32 (1,259.84) M/MIN (IPM) CUTTING FEED: X, Y, Z: 32 (105) M/MIN (FPM) SPINDLE DRIVE MOTOR: 11/7.5 (15/10) (8,000), 22/18.5 (30/24.67) (12,000, 15,000) KW (HP) AXIS FEED MOTOR: X, Y, Z: 3.5 (4.67) KW (HP) TOOL SHANK: STANDARD: MAS BT 40 (OPTIONAL: CAT NO. 40, DIN NO. 40, JIS BT40) PULL STUD: STANDARD: MAS 2 (OPTIONAL: MAS1, CAT, SPECIAL CAT, DIN, JIS) TOOL STORAGE CAPACITY (OPTIONAL): 20 (32) TOOLS MAX TOOL DIAMETER (WITH/WITHOUT ADJACENT TOOLS): 90/125 (3.54/4.92) MM (INCH) MAX TOOL LENGTH/WEIGHT: 300/8 (11.81/18) MM/KG (INCH/LB) TOOL SELECTION: MEMORY RANDOM TOOL CHANGE TIME (T-T/C-C): 1.2/4.0 SEC TOOL CHANGE METHOD: TOOL CHANGE ARM HEIGHT: 2,746 MM (108.11 INCH) REQUIRED FLOOR SPACE (WIDTH X DEPTH): 2,564 X 3,194 MM (100.94 X 125.75 INCH) MASS: 8,100 KG (17,820 LB) COOLANT TANK CAPACITY: 230 (60.8) (EFFECTIVE: 120 (31.7)) L (US GAL) REQUIRED TOTAL POWER: 22 (8,000), 37 (12,000, 15,000) KVA VOLTAGE: 200 VAC 10% V FREQUENCY: 50/60 HZ PROTECTION LEVEL OF CONTROL PANEL: IP 54 STANDARD SPINDLE BEARING LIFE COUNT: 20000:0 SPINDLE BEARING LIFE COUNTER: 315:40 SPINDLE ACCUMULATION TIME: 1685:24 SPINDLE HIGH SPEED TIME: 424:13 EQUIPPED WITH RENISHAW OMI-2T OPTICAL MACHINE INTERFACE LNS TURBO HB SIDE-EXIT CHIP CONVEYOR 32-POSITION AUTOMATIC TOOL CHANGER OSP SUITE AND ECO SUITE PLUS SOFTWARE PACKAGES THROUGH SPINDLE COOLANT (TSC) HELICAL CUTTING & RIGID TAPPING THERMO-FRIENDLY CONCEPT (TAS-C / TAS-S) FULL SET OF MANUALS AND TECHNICAL DOCUMENTATION S/N: 252325