2004 HAAS VF-3SS SUPER SPEED CNC VERTICAL MACHINING CENTER W/ 12,000 RPM, TSC. X-AXIS TRAVEL: 40.0" (1016 MM) Y-AXIS TRAVEL:...more

2004 HAAS VF-3SS SUPER SPEED CNC VERTICAL MACHINING CENTER W/ 12,000 RPM, TSC. X-AXIS TRAVEL: 40.0" (1016 MM) Y-AXIS TRAVEL: 20.0" (508 MM) Z-AXIS TRAVEL: 25.0" (635 MM) SPINDLE NOSE TO TABLE (MIN - MAX): 4.2" - 29.2" (107 MM - 742 MM) TABLE LENGTH: 48.0" (1219 MM) TABLE WIDTH: 18.0" (457 MM) MAX WEIGHT ON TABLE (EQUALLY DISTRIBUTED): 1,750 LBS (794 KG) T-SLOTS WIDTH: 5/8" (16 MM) T-SLOTS CENTER DISTANCE: 4.92" (125 MM) MAX SPINDLE SPEED: 12,000 RPM DRIVE SYSTEM: INLINE DIRECT-DRIVE SPINDLE MOTOR MAX RATING: 30.0 HP (22.4 KW) HAAS VECTOR DRIVE MAX TORQUE: 90 FT-LB @ 2,000 RPM SPINDLE TAPER: CAT 40 RAPID TRAVERSE (X, Y, Z AXES): 1,400 IPM (35.6 M/MIN) MAX CUTTING FEEDRATE: 833 IPM (21.2 M/MIN) AXIS THRUST (X, Y AXES): 3,085 LBF (13,723 N) AXIS THRUST (Z AXIS): 3,923 LBF (17,450 N) TOOL CHANGER CAPACITY: 24+1 POSITION SIDE-MOUNT TOOL CHANGER (SMTC) MAX TOOL DIAMETER (FULL): 3.0" (76 MM) MAX TOOL WEIGHT: 12 LBS (5.4 KG) TOOL-TO-TOOL TIME (AVERAGE): 1.6 - 2.8 SECONDS CHIP-TO-CHIP TIME (AVERAGE): 2.2 - 3.6 SECONDS VOLTAGE INPUT: 208 / 230 VAC PHASE: 3-PHASE FREQUENCY: 50 / 60 HZ FULL LOAD AMPERAGE: 80 AMPS LARGEST LOAD AMPERAGE: 70 AMPS SHORT CIRCUIT INTERRUPTING CAPACITY: 10,000 AMPS WIRING DIAGRAM NO: 93-8100 AIR REQUIRED: 4 SCFM @ 100 PSI (113 L/MIN @ 6.9 BAR) COOLANT TANK CAPACITY: 55 GALLON (208 LITERS) MACHINE WEIGHT: APPROX. 12,500 LBS (5,670 KG) COUNTRY OF MANUFACTURE: MADE IN U.S.A. (OXNARD, CA) MACHINE OPERATING METRICS: SERVO TIME: 21,961 HOURS, 58 MINUTES MOTION TIME: 12,685 HOURS, 14 MINUTES SPINDLE TIME: 12,023 HOURS, 48 MINUTES EQUIPPED WITH: HAAS CNC CONTROL INTERFACE CONSOLE WITH MANUAL JOG DIAL WHEEL THROUGH-SPINDLE COOLANT (TSC) SYSTEM UPGRADES ARRAY 24+1 POCKET SIDE-MOUNT HIGH-SPEED AUTOMATIC TOOL CHANGER CAROUSEL HAAS VECTOR DRIVE CLOSED-LOOP POWER AMPLIFIER MODULE (40/30 HP PEAK, MODEL 20-7052) PROGRAMMABLE COOLANT NOZZLE ADJUSTMENT BLOCK ASSEMBLY HEAVY-DUTY SIDE STORAGE ORGANIZATIONAL SHELVING (MOUNTED ON LEFT SIDE PANEL) DUAL FRONT SLIDING ACCESS DOORS WITH SAFETY POLYCARBONATE ENCLOSURE WINDOWS INTERIOR ENCLOSURE SAFETY HALOGEN/LED WORK LIGHT ASSEMBLY EXTERNAL ELECTRICAL DISCONNECT SWITCH HUB FRAME MOUNT (480 VOLTS PANEL RATED COMPONENT) S/N: 36021