CNC and Fabrication Machinery Surplus in Multiple Locations

Revelation Auctions

Category: CNC MACHINE CENTERS

Total Lots: 141

Total Sales: 🔒 Subscribe

Lot Price Distribution

🔒

Subscribe to view

Unlock price distribution and full auction analytics

Sort:

Showing 51–100 of 141 lots

Year	Make	Model	Lot Description	Hammer Price
2006	MAZAK	MAZATECH FH-8800	2006 MAZAK MAZATECH FH-8800 CNC HMC, HORIZONTAL MACHINING CENTER, HORIZONTAL TABLE/PALLET SIZE IN MM: 800MM, NUMBER OF PALLETS: 1, X-TRAVEL: 51.18 INCH, Y-TRAVEL: 43.13 INCH, Z-TRAVEL: 39.37 INCH, RAPID TRAVERSE: 1575 IPM, SPINDLE TAPER TYPE: CAT#50, MAIN CIRCUIT: 3AC 200V 50/60HZ, MAIN MOTOR: MAX 165A 200V, POWER: 40 HP, SPINDLE SPEED: 7,000 RPM, ATC #: 80, PALLET-W: 31.9 INCH, PALLET-L: 31.9 INCH, CONTROL: FUSION 640M, WEIGHT: 53,534 LBS S/N:189708 2006 · MAZAK · MAZATECH FH-8800	🔒 Subscribe
	TROY-BILT	5550	TROY-BILT 5550 GENERATOR TROY-BILT · 5550	🔒 Subscribe
	CRESS	C122012K	CRESS MODEL C122012K ELECTRIC MUFFLE FURNACE CRESS · C122012K	🔒 Subscribe
	LINCOLN	POWER WAVE 455	(2) LINCOLN POWER WAVE 455 WELDERS LINCOLN · POWER WAVE 455	🔒 Subscribe
2006	MAZAK	NEXUS HCM- 6000 II	2006 MAZAK NEXUS HCM- 6000 II CNC HMC, HORIZONTAL MACHINING CENTER, 10,000 RPM MAXIMUM SPINDLE SPEED, 32" X-, 32"-, AND 35" Z-AXIS TRAVEL, 80-POSITION AUTOMATIC TOOL CHANGER, 2-POSITION PALLET CHANGER, MAZAK MODEL MAZATROL MATRIX NEXUS DIGITAL CONTROL PANEL, MAZAK HIGH PRESSURE COOLANT FILTRATION SYSTEM, TSUBAKI MODEL MT10 CHIP CONVEYOR, MAIN CIRCUIT: 3AC 200/220V 50/60HZ, MAIN MOTOR: MAX 100A 400V, SPINDLE TAPER: CAT 50, PALLET-W: 19.7", PALLET-L: 19.7", # AXIS: 4, WEIGHT: 34,540 LBS S/N:192638 2006 · MAZAK · NEXUS HCM- 6000 II	🔒 Subscribe
2002	MAZAK	MAZATECH FH-6800	2002 MAZAK MAZATECH FH-6800 CNC HMC, HORIZONTAL MACHINING CENTER, DUAL PALLETS, SIZE 24.8 INCH X 24.8 INCH X-AXIS TRAVEL 41.34 INCH Y-AXIS TRAVEL 31.5 INCH Z-AXIS TRAVEL 34.6 INCH SPINDLE TAPER. #50 CAT SPINDLE SPEEDS, RANGE 7000 RPM ATC CAPACITY 120 TOOLS RAPID TRAVERSE 1575 IPM MAIN CIRCUIT: 3AC 200V 50/60HZ MAIN MOTOR: MAX 165A 200V SPINDLE MOTOR: 50/40HP PALLET CHANGE TIME: 10 SEC PALLET LOAD CAPACITY: 3,307 LBS WEIGHT: 43,430 LBS S/N:160437 2002 · MAZAK · MAZATECH FH-6800	🔒 Subscribe
	EZ RAMP		EZ RAMP 20' LONG EZ RAMP	🔒 Subscribe
		W-5	GIANT PARTS TUMBLER FOR MATERIAL DEBUR/POLISH W-5 S/N: 3162 W-5	🔒 Subscribe
2004	MAZAK	NEXUS HCN-6000	2004 MAZAK NEXUS HCN-6000 CNC HMC, HORIZONTAL MACHINING CENTER, 10,000 RPM MAXIMUM SPINDLE SPEED, 32 INCH X-,32 INCH-, AND 35 INCH Z-AXIS TRAVEL, 80-POSITION AUTOMATIC TOOL CHANGER, 2-POSITION PALLET CHANGER, MAZAK MODEL MAZATROL 64M DIGITAL CONTROL PANEL, MAZAK HIGH PRESSURE COOLANT FILTRATION SYSTEM, MAYFRAN INTERNATIONAL MODEL CHIP-TOTE CHIP CONVEYOR, MAIN CIRCUIT: 3AC 200/220V 50/60HZ, MAIN MOTOR: MAX 100A 400V, POWER: 49.6 HP, PALLET-W: 19.68 INCH, PALLET-L: 19.68 INCH, TAPER: ISO-50, # AXIS: 4, WEIGHT: 30,140 LBS 2004 · MAZAK · NEXUS HCN-6000	🔒 Subscribe
	LINCOLN	POWER WAVE	LINCOLN POWER WAVE WELDER LINCOLN · POWER WAVE	🔒 Subscribe
2020	RIMA	RS-1012S	2020 RIMA RS-1012S COMPENSATING COUNTER STACKER A DIMENSION 102 MM (4.00) (OPT. 89 MM (3.50)) 320 MM (12.63) B DIMENSION 152 MM (6.00) (OPT. 127 MM (5.00)) 470 MM (18.50) D DIMENSION LIMITED BY A & B 520 MM (20.50) THICKNESS 1 MM (0.04) 32 MM (1.25) SPEED PRODUCT PERMITTING 20,000 PRODUCTS PER HOUR STACK HEIGHT RS 1012S/1212S UPPER BIN TOTAL STACK 127 MM (5.00) 235 MM (9.25) STACK HEIGHT RS 10 UPPER BIN TOTAL STACK 127 MM (5.00) 330 MM (13.00) INFEED HEIGHT RS 10 VAR. BETWEEN 660 MM (26.00) 990 MM (39.00) INFEED HEIGHT RS 10 VAR. BETWEEN 750 MM (29.50) 1079 MM (42.50) PRODUCT ORIENTATION: SPINE LEADING (PREFERED) DELIVERY HEIGHT 876 MM (34.50) INPUT POWER RS 10S: 1.5 KVA (STANDARD) / 3 KVA (SERVO), 50/60 HZ, 3 ~ (VOLTAGE: SEE TECHNICAL SPECIFICATION) AIR REQUIREMENT RS 10S: 45 L/MIN (1.6 CFM) (NORMAL) / 76 L/MIN (2.7 CFM) (MAXIMAL) @ 5,5 BAR (80 PSI) WEIGHT: 1,100 LBS NOISE LEVEL DIN 45635 SECTION 27 85 DB(A DIMENSION 77X34X72 2020 · RIMA · RS-1012S	🔒 Subscribe
	EXCALIBUR	F3016	EXCALIBUR MODEL F3016 OVEN EXCALIBUR · F3016	🔒 Subscribe
2020	KITAMURA	MYCENTER HX300IG	2020 KITAMURA MYCENTER HX300IG HMC - COOLANT THROUGH SPINDLE, SHOWER COOLANT PALLET SIZE: 11.8 X 11.8 MAX LOAD ON PALLET: 550 LBS X-AXIS TRAVEL: 18.1 Y-AXIS TRAVEL: 20.1 Z-AXIS TRAVEL: 22 MOTOR: 18 HP SPINDLE SPEED: 15,000 RPM ATC: 50 SPINDLE TAPER: CAT 40 PALLET INDEXING: B-AXIS RAPID TRAVERSE: 2,362 IPM EQUIPPED WITH: 220 PSI COOLANT THROUGH SPINDLE SHOWER COOLANT 2020 · KITAMURA · MYCENTER HX300IG	🔒 Subscribe
	HTC	1000-12SR	1" X 12' HTC 1000-12SR SHEAR HTC · 1000-12SR	🔒 Subscribe
1999	HAAS	VF-1	1999 HAAS VF-1 CNC VERTICAL MACHINING CENTER. X-AXIS TRAVEL: 20 INCH (508 MM) Y-AXIS TRAVEL: 16 INCH (406 MM) Z-AXIS TRAVEL: 20 INCH (508 MM) SPINDLE NOSE TO TABLE RANGE: 4 INCH (MIN) TO 24 INCH (MAX) TABLE SIZE (LENGTH X WIDTH): 26 INCH X 14 INCH (660 MM X 356 MM) MAX TABLE LOAD: 3,000 LB (1360 KG) SPINDLE TAPER: CAT-40 SPINDLE MAX RPM: 7,500 RPM SPINDLE MOTOR POWER: 20 HP AUTOMATIC TOOL CHANGER (ATC) CAPACITY: 20 TOOLS RAPID TRAVERSE (X/Y/Z): 710 IPM 1999 · HAAS · VF-1	🔒 Subscribe
2003	FANUC	T21ID ROBODRILL	2003 FANUC T21ID ROBODRILL VERTICAL MACHINING CENTER, FANUC ROBODRILL A-T21ID, 200/220V 3-PHASE 60HZ, X-AXIS: 19.6 INCH Y-AXIS: 15.7 INCH Z-AXIS: 13 INCH, TABLE SIZE: 25.5 INCH X 15.7 INCH, TABLE CAPACITY: 550 LBS, SPINDLE TAPER: BT 30, SPINDLE SPEED: MAX 20,000 RPM, TOOL CHANGER CAPACITY: 21, SPINDLE DRIVE: 7.4/ 5 HP, FANUC 16IMB CNC CONTROL S/N: 032UP026 2003 · FANUC · T21ID ROBODRILL	🔒 Subscribe
	OKUMA HOWA	2SP-V5	OKUMA HOWA 2SP-V5 VERTICAL TWIN SPINDLE LATHE, 440V 3-PHASE 60HZ, (2) 12-STATION TURRETS, SWING: 31.5 INCH, DISTANCE BETWEEN CENTERS: 31.8 INCH, MACHINING CUTTING DIA.: 22.6 INCH, MACHINING LENGTH: 24 INCH, # OF AXIS: 4, X-AXIS: 12.6 INCH, Z-AXIS: 24 INCH, BAR CAPACITY: 4.33 INCH, POWER: 40HP, MAX RPM: 2,000 RPM, TURNING DIA. 21.6 INCH, APPROXIMATE WEIGHT: 41,800 LBS, FANUC CNC CONTROL OKUMA HOWA · 2SP-V5	🔒 Subscribe
	OKUMA HOWA	MILLAC 40V	OKUMA HOWA MILLAC 40V MILLAC 40-V POWER SUPPLY: 240V 3-PHASE 60HZ X-AXIS: 22.8" Y-AXIS: 15.7" Z-AXIS: 17.7" TABLE SIZE: 15.2" X 31.5" SPINDLE SPEED: 10,000 RPM SPINDLE TAPER: CAT 40 SPINDLE CENTER TO COLUMN: 16.9" ATC: 20 TOOLS FANUC SERIES O-M CONTROL OKUMA HOWA · MILLAC 40V	🔒 Subscribe
2000	MURATA	MW-200	2000 MURATA MW-200 TWIN SPINDLE CNC, 10" CHUCK SIZE, 7.87" TURNING DIAMETER, 4.72" TURNING LENGTH, 2 SPINDLES @ 29HP, MAX RPM: 3,500 RPM, 22KW SPINDLE DRIVE MOTOR, 10 X 2 TOOLS, APPROXIMATE WEIGHT: 16,000 LBS S/N:9KX9365610 2000 · MURATA · MW-200	🔒 Subscribe
2020	WEINIG	VALURIP RIPMAX	2020 WEINIG VALURIP RIPMAX RIP SAW AUTOMATIC INFEED, 17 POINTS OF WIDTH MEASUREMENT FOR BASIC SHAPE DETECTION, INDUSTRIAL PC WITH ERGONOMIC, TOUCH SCREEN, TIMBERMAX OPTIMIZING/TALLY SOFTWARE, BASED ON SHAPE OPTIMIZING, SYSTEM WILL AUTOMATICALLY POSITION FENCE AND MOVING BLADES APPROPRIATE TO THE SOLUTION, MOVING LASERS DISPLAY RIP SOLUTION PRIOR TO RIPPING, 10-14 AVERAGE NUMBER OF BOARDS PROCESSED PER MINUTE BY THE OPERATOR. NOTE: THIS IS BASED ON 10 FT. BOARDS WITH NO OVERRIDES. 2020 · WEINIG · VALURIP RIPMAX	🔒 Subscribe
2002	HAAS	MINI MILL	2002 HAAS MINI MILL X / Y / Z TRAVEL: 16 INCH 12 INCH 10 INCH TABLE SIZE: 36 INCH 12 INCH (3 T-SLOTS) MAX TABLE LOAD: ~500 LB SPINDLE SPEED: ~6,000 RPM SPINDLE TAPER: CAT/CT-40 SPINDLE MOTOR: ~7.5 HP TOOLCHANGER: 10-STATION ATC RAPID RATES: ~600 IPM WEIGHT / FOOTPRINT: ~4,000 LB; ~90 INCH 64 INCH 100 INCH 2002 · HAAS · MINI MILL	🔒 Subscribe
2004	HAAS	SUPER MINI MILL	2004 HAAS SUPER MINI MILL - X / Y / Z TRAVELS: 16 INCH 12 INCH 10 INCH. TABLE SIZE: ~36 INCH 12 INCH MAX TABLE LOAD: ~500 LB (227 KG) SPINDLE MAX SPEED: 10,000 RPM SPINDLE TAPER: CT-40 / BT-40 (40-TAPER) SPINDLE MOTOR: ~15 HP (MAX RATING) TOOLCHANGER: 10-STATION ATC (STANDARD) RAPID TRAVERSE: ~1,200 IPM (X/Y/Z) 2004 · HAAS · SUPER MINI MILL	🔒 Subscribe
1993	FANUC	ROBODRILL A-T10A	1993 FANUC ROBODRILL A-T10A VERTICAL MACHINING CENTER, 220V 3-PHASE 60HZ, X-AXIS: 19.6 INCH Y-AXIS: 14.9 INCH Z-AXIS: 11.8 INCH, TABLE CAPACITY: 440 LBS, SPINDLE TAPER: BT 30, SPINDLE SPEED: 80-8,000 RPM, TOOL CHANGER CAPACITY: 10, SPINDLE DRIVE: 7.5 HP, FANUC CNC CONTROL S/N: 937TD032 1993 · FANUC · ROBODRILL A-T10A	🔒 Subscribe
	ENSHU	JE-50	ENSHU JE-50 HORIZONTAL MACHINING CENTER - ENSHU JE-50S PRODUCTION X-AXIS: 19.6 INCH Y-AXIS: 19.6 INCH Z-AXIS: 19.6 INCH RAPID FEEDRATE: 2,362IN/MIN MAX TABLE LOADING WEIGHT 1,433 LBS MAX SPINDLE SPEED: 12,000 RPM # ATC 40 #40 TAPER FANUC 18-IM CONTROL ENSHU · JE-50	🔒 Subscribe
	ALLSOURCE	41800	ALLSOURCE ABRASIVE BLAST CABINET 41800 ALLSOURCE · 41800	🔒 Subscribe
	TELEDYNE OSTER		TELEDYNE OSTER PIPE/BOLT THREADER TELEDYNE OSTER	🔒 Subscribe
	CAMMANN		CAMMANN METAL DISINTEGRATOR CAMMANN	🔒 Subscribe
2017	FURIA ITALMAC	DOUBLE MITER HORIZONTAL SAW	2017 FURIA ITALMAC DOUBLE MITER HORIZONTAL SAW LEFT SAW ANGLE-MITER 600MM BLADE RIGHT SAW ANGLE-BEVEL 500MM BLADE AUTO FEED FUNCTION, DIGITAL LENGTH ADJUSTMENT 2017 · FURIA ITALMAC · DOUBLE MITER HORIZONTAL SAW	🔒 Subscribe
	ITALMAC	S7000	ITALMAC 4 AXIS ALUMINUM EXTRUSION PROFILING MACHINING CENTER SPRING S7000 CNC CONTROLLED. DESIGNED FOR MILLING AND DRILLING STEEL AND ALUMINUM ITALMAC · S7000	🔒 Subscribe
	DOOSAN	DOOTURN-4	DOOSAN DOOTURN-4 CNC LATHE, FANUC KOREA SERIES O-T CONTROL, 220V/ 3 PHASE, MAX TURNING DIAMETER: 15.35 INCH, MAX TURNING LENGTH: 28.74 INCH, MAX BAR CAPACITY: 3.75 INCH, SWING OVER BED: 22.83 INCH, X-AXIS: 9.65 INCH, Z-AXIS: 29.53 INCH, SPINDLE SPEED: 40-3500 RPM, TURRET CAPACITY: 12 STATIONS, WEIGHT: AROUND 11,500 LBS DOOSAN · DOOTURN-4	🔒 Subscribe
2012	HYDMECH	VW-18	2012 HYDMECH VW-18 VERTICAL BAND SAW, 18 INCH X 22 INCH CAPACITY AT 90 DEGREES RECTANGULAR: 22 X 18, ROUND: 17 1/2. CAPACITY AT 45 DEGREES RECTANGULAR: 15 X 18, ROUND: 12 1/2. CAPACITY AT 60 DEGREES RECTANGULAR: 10 1/4 X 18, ROUND: 10 1/4. BLADE SPEED: 65-385 SFM. BLADE SIZE: 1 1/4 X 16 3. BLADE DRIVE: 5 HP VFD. MACHINE VOLTAGE: 240 V. 2012 · HYDMECH · VW-18	🔒 Subscribe
2021	BESCUTTER	LC1530M	2021 5' X 10' BESCUTTER LC1530M 300W CO2 LASER - INCLUDES S&A CW6000 INDUSTRIAL WATER CHILLER. LASER POWER: 300W, LASER TUBE TYPE: ECO2, LASER TUBE LIFETIME: 10,000 HOURS APPROX., POWER SUPPLY: AC 220V, 60HZ, FOCUS LENS: 2.5 FOCAL LENS (SUPPORTS 4 LENSES), WORKING AREA: 5 X 10, MAX MOVING SPEED: 16 IN/S, MACHINE DIMENSIONS: 138 X 77 X 44, GROSS WEIGHT: 2,800 LBS., CONTROLLING SYSTEM: RUIDA CONTROLLER RDC6332, CONNECTION METHOD: USB CABLE/ ETHERNET, CERTIFICATION: CE, ISO, CLASS: CLASS 4 LASER 2021 · BESCUTTER · LC1530M	🔒 Subscribe
	PARKER	6" X 18"	PARKER 6 INCH X 18 INCH SURFACE GRINDER PARKER · 6" X 18"	🔒 Subscribe
	YALE		(2) YALE 5-TON CRANES YALE	🔒 Subscribe
	ABELL-HOWE		ABELL-HOWE JIB CRANE ABELL-HOWE	🔒 Subscribe
			25 HP AIR COMPRESSOR WITH A SPARE 25HP MOTOR	🔒 Subscribe
	NEDERMAN		NEDERMAN MIST COLLECTOR NEDERMAN	🔒 Subscribe
	ABICOR BINZEL	4	ABICOR BINZEL WELDING GUN #4 ABICOR BINZEL · 4	🔒 Subscribe
	KELLENBURGER	OD GRINDER	KELLENBURGER OD GRINDER KELLENBURGER · OD GRINDER	🔒 Subscribe
	BLUE M ELECTRIC	ESP-400C-5	BLUE M ELECTRIC ESP-400C-5 ANNEALING OVEN S/N:O09F-291555-OF BLUE M ELECTRIC · ESP-400C-5	🔒 Subscribe
	INGERSOL RAND	UP6-15C	ONE INGERSOL RAND UP6-15C AIR COMPRESSOR S/N:CBV187985 INGERSOL RAND · UP6-15C	🔒 Subscribe
	INGERSOL RAND	UP6-15C	ONE INGERSOL RAND UP6-15C AIR COMPRESSOR S/N:CBV183072 INGERSOL RAND · UP6-15C	🔒 Subscribe
	HAEGER	HP6	HAEGER PEM SETTER, MODEL HP6 S/N:1508 HAEGER · HP6	🔒 Subscribe
	HAAS	TR160Y	HAAS TRUNNION, MODEL TR160Y S/N:906463 HAAS · TR160Y	🔒 Subscribe
2024	BETENBENDER	12-250	2024 BETENBENDER 12-250 HYDRAULIC GUILLOTINE SHEAR CAPACITY - A-36 MILD STEEL (80,000 LB TENSILE): 1/4" CAPACITY - 304 STAINLESS STEEL (AT HIGHEST RAKE): 1/4" (NON-PRODUCTION) MAIN MOTOR: 15 HP NOMINAL CUTTING LENGTH: 144" NUMBER OF HOLD-DOWNS: 21 KNIVES (4 CUTTING EDGES): 148" X 1" X 4" RAKE OF MOVING BLADE (PER FOOT): 1/4" BACK GAUGE RANGE: 36" STROKES PER MINUTE: 13 CONTROL: NC CONTROL 5-STATION OIL RESERVOIR (HYDRAULIC OIL INCLUDED): 42 GALLONS SHIPPING WEIGHT: 14,000 LBS. SHIPPING DIMS: 61" H X 180" X 80" W VERY MINIMAL USE / VERY LOW HOURS 2024 · BETENBENDER · 12-250	🔒 Subscribe
2024	HAFFNER	TT-425	2024 HAFFNER TT-425 PROFILE DOUBLE HEAD MITRE SAW CUTTING AREA: 13.1' X 19.6' X 24.6' PIVOT ANGLE RANGE: 90 TO 22.5 (WITH INTERMEDIATE STOPS) TILTING & PIVOTING DEGREE: 90 AND 45 (BY PNEUMATIC CYLINDER) SAW BLADE MOTOR: 5.36 HP X 2 SAW BLADE SPEEDS: 2,800 RPM / 3,400 RPM SAW BLADE DIAMETER: 18.7" MIN CUTTING LENGTH AT 90 & 45: 17.71" PIVOTING RANGE: INWARDS 90- 22.5 WITH ACCURACY UP TO 0.1 TILTING RANGE: INWARDS PNEUMATICALLY 90- 45 COMPRESSED AIR SUPPLY: 100 PSI (7 BAR) AIR CONSUMPTION PER WORKING CYCLE: 2.12 CU. FT. EQUIPPED WITH: PNEUMATIC SAW BLADE FEED SYSTEM WITH ADJUSTABLE BLADE FEED SPEED VERTICAL AND HORIZONTAL PNEUMATIC CLAMPS STANDARD CUTTING LENGTHS VERY MINIMAL USE/VERY LOW HOURS 2024 · HAFFNER · TT-425	🔒 Subscribe
2022	LONE STAR CUTTING SOLUTIONS	SPITFIRE PLASMA TABLE	2022 LONE STAR CUTTING SOLUTIONS SPITFIRE PLASMA TABLE; HYPERTHERM POWERMAX 65 - 5' X 10' CUTTING WIDTH: 5' CUTTING LENGTH: 10' GANTRY HEIGHT: 4' MAX TRAVERSE SPEED: 800 IPM POWER SOURCE: HYPERTHERM POWERMAX 65 50 FT TORCH LEAD EQUIPPED WITH HYPERTHERM POWERMAX 65 MAX. PRODUCTION CUT CAPACITY: 1' MILD STEEL, 12' ALUMINUM, 12' STAINLESS 2022 · LONE STAR CUTTING SOLUTIONS · SPITFIRE PLASMA TABLE	🔒 Subscribe
	WISCONSIN OVEN		650 WISCONSIN OVEN- 110 INCH H X 66 INCH W X 52 INCH D WISCONSIN OVEN	🔒 Subscribe
2000	BRANDT	KD-94	2000 BRANDT KD-94 EDGE BANDER EDGE THICKNESS CAPACITY (STRIP): 0.4MM - 20MM EDGE THICKNESS CAPACITY (COIL): 0.4MM - 3MM PANEL THICKNESS: 3/8 - 2-3/8 MINIMUM PANEL LENGTH: 6-3/8 MINIMUM PANEL WIDTH: 2-1/2 PANEL HEIGHT: 10MM - 55MM EQUIPPED WITH: SWIVEL OPERATOR CONTROL PANEL 2000 · BRANDT · KD-94	🔒 Subscribe
	MORI SEIKI	ZL-35	MORI SEIKI ZL-35 4 AXIS CNC LATHE, TURNING CENTER SPECIFICATIONS: SWING OVER BED: 23.6 INCH CHUCK SIZE: 12 INCH MAX TURNING DIA.: AROUND 15.4 INCH MAX TURNING LENGTH: AROUND 32.9 INCH SPINDLE SPEED: UP TO 2,500 RPM MOTOR: 40HP CONTROL: MORI SEIKI MSC-501 X-AXIS TRAVEL: 8.9 INCH UPPER TURRET/ 8.3 INCH LOWER TURRET Z-AXIS TRAVEL: 33.7 INCH WEIGHT: AROUND 24,000LBS MORI SEIKI · ZL-35	🔒 Subscribe

Year	Make	Model	Description	Price
2006	MAZAK	MAZATECH FH-8800	2006 MAZAK MAZATECH FH-8800 CNC HMC, HORIZONTAL MACHINING CENTER, HORIZONTAL TABLE/PALLET SIZE IN MM: 800MM, NUMBER OF PALLETS: 1, X-TRAVEL: 51.18 INCH, Y-TRAVEL: 43.13 INCH, Z-TRAVEL: 39.37 INCH, RAPID TRAVERSE: 1575 IPM, SPINDLE TAPER TYPE: CAT#50, MAIN CIRCUIT: 3AC 200V 50/60HZ, MAIN MOTOR: MAX 165A 200V, POWER: 40 HP, SPINDLE SPEED: 7,000 RPM, ATC #: 80, PALLET-W: 31.9 INCH, PALLET-L: 31.9 INCH, CONTROL: FUSION 640M, WEIGHT: 53,534 LBS S/N:189708	🔒 Subscribe
	TROY-BILT	5550	TROY-BILT 5550 GENERATOR	🔒 Subscribe
	CRESS	C122012K	CRESS MODEL C122012K ELECTRIC MUFFLE FURNACE	🔒 Subscribe
	LINCOLN	POWER WAVE 455	(2) LINCOLN POWER WAVE 455 WELDERS	🔒 Subscribe
2006	MAZAK	NEXUS HCM- 6000 II	2006 MAZAK NEXUS HCM- 6000 II CNC HMC, HORIZONTAL MACHINING CENTER, 10,000 RPM MAXIMUM SPINDLE SPEED, 32" X-, 32"-, AND 35" Z-AXIS TRAVEL, 80-POSITION AUTOMATIC TOOL CHANGER, 2-POSITION PALLET CHANGER, MAZAK MODEL MAZATROL MATRIX NEXUS DIGITAL CONTROL PANEL, MAZAK HIGH PRESSURE COOLANT FILTRATION SYSTEM, TSUBAKI MODEL MT10 CHIP CONVEYOR, MAIN CIRCUIT: 3AC 200/220V 50/60HZ, MAIN MOTOR: MAX 100A 400V, SPINDLE TAPER: CAT 50, PALLET-W: 19.7", PALLET-L: 19.7", # AXIS: 4, WEIGHT: 34,540 LBS S/N:192638	🔒 Subscribe
2002	MAZAK	MAZATECH FH-6800	2002 MAZAK MAZATECH FH-6800 CNC HMC, HORIZONTAL MACHINING CENTER, DUAL PALLETS, SIZE 24.8 INCH X 24.8 INCH X-AXIS TRAVEL 41.34 INCH Y-AXIS TRAVEL 31.5 INCH Z-AXIS TRAVEL 34.6 INCH SPINDLE TAPER. #50 CAT SPINDLE SPEEDS, RANGE 7000 RPM ATC CAPACITY 120 TOOLS RAPID TRAVERSE 1575 IPM MAIN CIRCUIT: 3AC 200V 50/60HZ MAIN MOTOR: MAX 165A 200V SPINDLE MOTOR: 50/40HP PALLET CHANGE TIME: 10 SEC PALLET LOAD CAPACITY: 3,307 LBS WEIGHT: 43,430 LBS S/N:160437	🔒 Subscribe
	EZ RAMP		EZ RAMP 20' LONG	🔒 Subscribe
		W-5	GIANT PARTS TUMBLER FOR MATERIAL DEBUR/POLISH W-5 S/N: 3162	🔒 Subscribe
2004	MAZAK	NEXUS HCN-6000	2004 MAZAK NEXUS HCN-6000 CNC HMC, HORIZONTAL MACHINING CENTER, 10,000 RPM MAXIMUM SPINDLE SPEED, 32 INCH X-,32 INCH-, AND 35 INCH Z-AXIS TRAVEL, 80-POSITION AUTOMATIC TOOL CHANGER, 2-POSITION PALLET CHANGER, MAZAK MODEL MAZATROL 64M DIGITAL CONTROL PANEL, MAZAK HIGH PRESSURE COOLANT FILTRATION SYSTEM, MAYFRAN INTERNATIONAL MODEL CHIP-TOTE CHIP CONVEYOR, MAIN CIRCUIT: 3AC 200/220V 50/60HZ, MAIN MOTOR: MAX 100A 400V, POWER: 49.6 HP, PALLET-W: 19.68 INCH, PALLET-L: 19.68 INCH, TAPER: ISO-50, # AXIS: 4, WEIGHT: 30,140 LBS	🔒 Subscribe
	LINCOLN	POWER WAVE	LINCOLN POWER WAVE WELDER	🔒 Subscribe
2020	RIMA	RS-1012S	2020 RIMA RS-1012S COMPENSATING COUNTER STACKER A DIMENSION 102 MM (4.00) (OPT. 89 MM (3.50)) 320 MM (12.63) B DIMENSION 152 MM (6.00) (OPT. 127 MM (5.00)) 470 MM (18.50) D DIMENSION LIMITED BY A & B 520 MM (20.50) THICKNESS 1 MM (0.04) 32 MM (1.25) SPEED PRODUCT PERMITTING 20,000 PRODUCTS PER HOUR STACK HEIGHT RS 1012S/1212S UPPER BIN TOTAL STACK 127 MM (5.00) 235 MM (9.25) STACK HEIGHT RS 10 UPPER BIN TOTAL STACK 127 MM (5.00) 330 MM (13.00) INFEED HEIGHT RS 10 VAR. BETWEEN 660 MM (26.00) 990 MM (39.00) INFEED HEIGHT RS 10 VAR. BETWEEN 750 MM (29.50) 1079 MM (42.50) PRODUCT ORIENTATION: SPINE LEADING (PREFERED) DELIVERY HEIGHT 876 MM (34.50) INPUT POWER RS 10S: 1.5 KVA (STANDARD) / 3 KVA (SERVO), 50/60 HZ, 3 ~ (VOLTAGE: SEE TECHNICAL SPECIFICATION) AIR REQUIREMENT RS 10S: 45 L/MIN (1.6 CFM) (NORMAL) / 76 L/MIN (2.7 CFM) (MAXIMAL) @ 5,5 BAR (80 PSI) WEIGHT: 1,100 LBS NOISE LEVEL DIN 45635 SECTION 27 85 DB(A DIMENSION 77X34X72	🔒 Subscribe
	EXCALIBUR	F3016	EXCALIBUR MODEL F3016 OVEN	🔒 Subscribe
2020	KITAMURA	MYCENTER HX300IG	2020 KITAMURA MYCENTER HX300IG HMC - COOLANT THROUGH SPINDLE, SHOWER COOLANT PALLET SIZE: 11.8 X 11.8 MAX LOAD ON PALLET: 550 LBS X-AXIS TRAVEL: 18.1 Y-AXIS TRAVEL: 20.1 Z-AXIS TRAVEL: 22 MOTOR: 18 HP SPINDLE SPEED: 15,000 RPM ATC: 50 SPINDLE TAPER: CAT 40 PALLET INDEXING: B-AXIS RAPID TRAVERSE: 2,362 IPM EQUIPPED WITH: 220 PSI COOLANT THROUGH SPINDLE SHOWER COOLANT	🔒 Subscribe
	HTC	1000-12SR	1" X 12' HTC 1000-12SR SHEAR	🔒 Subscribe
1999	HAAS	VF-1	1999 HAAS VF-1 CNC VERTICAL MACHINING CENTER. X-AXIS TRAVEL: 20 INCH (508 MM) Y-AXIS TRAVEL: 16 INCH (406 MM) Z-AXIS TRAVEL: 20 INCH (508 MM) SPINDLE NOSE TO TABLE RANGE: 4 INCH (MIN) TO 24 INCH (MAX) TABLE SIZE (LENGTH X WIDTH): 26 INCH X 14 INCH (660 MM X 356 MM) MAX TABLE LOAD: 3,000 LB (1360 KG) SPINDLE TAPER: CAT-40 SPINDLE MAX RPM: 7,500 RPM SPINDLE MOTOR POWER: 20 HP AUTOMATIC TOOL CHANGER (ATC) CAPACITY: 20 TOOLS RAPID TRAVERSE (X/Y/Z): 710 IPM	🔒 Subscribe
2003	FANUC	T21ID ROBODRILL	2003 FANUC T21ID ROBODRILL VERTICAL MACHINING CENTER, FANUC ROBODRILL A-T21ID, 200/220V 3-PHASE 60HZ, X-AXIS: 19.6 INCH Y-AXIS: 15.7 INCH Z-AXIS: 13 INCH, TABLE SIZE: 25.5 INCH X 15.7 INCH, TABLE CAPACITY: 550 LBS, SPINDLE TAPER: BT 30, SPINDLE SPEED: MAX 20,000 RPM, TOOL CHANGER CAPACITY: 21, SPINDLE DRIVE: 7.4/ 5 HP, FANUC 16IMB CNC CONTROL S/N: 032UP026	🔒 Subscribe
	OKUMA HOWA	2SP-V5	OKUMA HOWA 2SP-V5 VERTICAL TWIN SPINDLE LATHE, 440V 3-PHASE 60HZ, (2) 12-STATION TURRETS, SWING: 31.5 INCH, DISTANCE BETWEEN CENTERS: 31.8 INCH, MACHINING CUTTING DIA.: 22.6 INCH, MACHINING LENGTH: 24 INCH, # OF AXIS: 4, X-AXIS: 12.6 INCH, Z-AXIS: 24 INCH, BAR CAPACITY: 4.33 INCH, POWER: 40HP, MAX RPM: 2,000 RPM, TURNING DIA. 21.6 INCH, APPROXIMATE WEIGHT: 41,800 LBS, FANUC CNC CONTROL	🔒 Subscribe
	OKUMA HOWA	MILLAC 40V	OKUMA HOWA MILLAC 40V MILLAC 40-V POWER SUPPLY: 240V 3-PHASE 60HZ X-AXIS: 22.8" Y-AXIS: 15.7" Z-AXIS: 17.7" TABLE SIZE: 15.2" X 31.5" SPINDLE SPEED: 10,000 RPM SPINDLE TAPER: CAT 40 SPINDLE CENTER TO COLUMN: 16.9" ATC: 20 TOOLS FANUC SERIES O-M CONTROL	🔒 Subscribe
2000	MURATA	MW-200	2000 MURATA MW-200 TWIN SPINDLE CNC, 10" CHUCK SIZE, 7.87" TURNING DIAMETER, 4.72" TURNING LENGTH, 2 SPINDLES @ 29HP, MAX RPM: 3,500 RPM, 22KW SPINDLE DRIVE MOTOR, 10 X 2 TOOLS, APPROXIMATE WEIGHT: 16,000 LBS S/N:9KX9365610	🔒 Subscribe
2020	WEINIG	VALURIP RIPMAX	2020 WEINIG VALURIP RIPMAX RIP SAW AUTOMATIC INFEED, 17 POINTS OF WIDTH MEASUREMENT FOR BASIC SHAPE DETECTION, INDUSTRIAL PC WITH ERGONOMIC, TOUCH SCREEN, TIMBERMAX OPTIMIZING/TALLY SOFTWARE, BASED ON SHAPE OPTIMIZING, SYSTEM WILL AUTOMATICALLY POSITION FENCE AND MOVING BLADES APPROPRIATE TO THE SOLUTION, MOVING LASERS DISPLAY RIP SOLUTION PRIOR TO RIPPING, 10-14 AVERAGE NUMBER OF BOARDS PROCESSED PER MINUTE BY THE OPERATOR. NOTE: THIS IS BASED ON 10 FT. BOARDS WITH NO OVERRIDES.	🔒 Subscribe
2002	HAAS	MINI MILL	2002 HAAS MINI MILL X / Y / Z TRAVEL: 16 INCH 12 INCH 10 INCH TABLE SIZE: 36 INCH 12 INCH (3 T-SLOTS) MAX TABLE LOAD: ~500 LB SPINDLE SPEED: ~6,000 RPM SPINDLE TAPER: CAT/CT-40 SPINDLE MOTOR: ~7.5 HP TOOLCHANGER: 10-STATION ATC RAPID RATES: ~600 IPM WEIGHT / FOOTPRINT: ~4,000 LB; ~90 INCH 64 INCH 100 INCH	🔒 Subscribe
2004	HAAS	SUPER MINI MILL	2004 HAAS SUPER MINI MILL - X / Y / Z TRAVELS: 16 INCH 12 INCH 10 INCH. TABLE SIZE: ~36 INCH 12 INCH MAX TABLE LOAD: ~500 LB (227 KG) SPINDLE MAX SPEED: 10,000 RPM SPINDLE TAPER: CT-40 / BT-40 (40-TAPER) SPINDLE MOTOR: ~15 HP (MAX RATING) TOOLCHANGER: 10-STATION ATC (STANDARD) RAPID TRAVERSE: ~1,200 IPM (X/Y/Z)	🔒 Subscribe
1993	FANUC	ROBODRILL A-T10A	1993 FANUC ROBODRILL A-T10A VERTICAL MACHINING CENTER, 220V 3-PHASE 60HZ, X-AXIS: 19.6 INCH Y-AXIS: 14.9 INCH Z-AXIS: 11.8 INCH, TABLE CAPACITY: 440 LBS, SPINDLE TAPER: BT 30, SPINDLE SPEED: 80-8,000 RPM, TOOL CHANGER CAPACITY: 10, SPINDLE DRIVE: 7.5 HP, FANUC CNC CONTROL S/N: 937TD032	🔒 Subscribe
	ENSHU	JE-50	ENSHU JE-50 HORIZONTAL MACHINING CENTER - ENSHU JE-50S PRODUCTION X-AXIS: 19.6 INCH Y-AXIS: 19.6 INCH Z-AXIS: 19.6 INCH RAPID FEEDRATE: 2,362IN/MIN MAX TABLE LOADING WEIGHT 1,433 LBS MAX SPINDLE SPEED: 12,000 RPM # ATC 40 #40 TAPER FANUC 18-IM CONTROL	🔒 Subscribe
	ALLSOURCE	41800	ALLSOURCE ABRASIVE BLAST CABINET 41800	🔒 Subscribe
	TELEDYNE OSTER		TELEDYNE OSTER PIPE/BOLT THREADER	🔒 Subscribe
	CAMMANN		CAMMANN METAL DISINTEGRATOR	🔒 Subscribe
2017	FURIA ITALMAC	DOUBLE MITER HORIZONTAL SAW	2017 FURIA ITALMAC DOUBLE MITER HORIZONTAL SAW LEFT SAW ANGLE-MITER 600MM BLADE RIGHT SAW ANGLE-BEVEL 500MM BLADE AUTO FEED FUNCTION, DIGITAL LENGTH ADJUSTMENT	🔒 Subscribe
	ITALMAC	S7000	ITALMAC 4 AXIS ALUMINUM EXTRUSION PROFILING MACHINING CENTER SPRING S7000 CNC CONTROLLED. DESIGNED FOR MILLING AND DRILLING STEEL AND ALUMINUM	🔒 Subscribe
	DOOSAN	DOOTURN-4	DOOSAN DOOTURN-4 CNC LATHE, FANUC KOREA SERIES O-T CONTROL, 220V/ 3 PHASE, MAX TURNING DIAMETER: 15.35 INCH, MAX TURNING LENGTH: 28.74 INCH, MAX BAR CAPACITY: 3.75 INCH, SWING OVER BED: 22.83 INCH, X-AXIS: 9.65 INCH, Z-AXIS: 29.53 INCH, SPINDLE SPEED: 40-3500 RPM, TURRET CAPACITY: 12 STATIONS, WEIGHT: AROUND 11,500 LBS	🔒 Subscribe
2012	HYDMECH	VW-18	2012 HYDMECH VW-18 VERTICAL BAND SAW, 18 INCH X 22 INCH CAPACITY AT 90 DEGREES RECTANGULAR: 22 X 18, ROUND: 17 1/2. CAPACITY AT 45 DEGREES RECTANGULAR: 15 X 18, ROUND: 12 1/2. CAPACITY AT 60 DEGREES RECTANGULAR: 10 1/4 X 18, ROUND: 10 1/4. BLADE SPEED: 65-385 SFM. BLADE SIZE: 1 1/4 X 16 3. BLADE DRIVE: 5 HP VFD. MACHINE VOLTAGE: 240 V.	🔒 Subscribe
2021	BESCUTTER	LC1530M	2021 5' X 10' BESCUTTER LC1530M 300W CO2 LASER - INCLUDES S&A CW6000 INDUSTRIAL WATER CHILLER. LASER POWER: 300W, LASER TUBE TYPE: ECO2, LASER TUBE LIFETIME: 10,000 HOURS APPROX., POWER SUPPLY: AC 220V, 60HZ, FOCUS LENS: 2.5 FOCAL LENS (SUPPORTS 4 LENSES), WORKING AREA: 5 X 10, MAX MOVING SPEED: 16 IN/S, MACHINE DIMENSIONS: 138 X 77 X 44, GROSS WEIGHT: 2,800 LBS., CONTROLLING SYSTEM: RUIDA CONTROLLER RDC6332, CONNECTION METHOD: USB CABLE/ ETHERNET, CERTIFICATION: CE, ISO, CLASS: CLASS 4 LASER	🔒 Subscribe
	PARKER	6" X 18"	PARKER 6 INCH X 18 INCH SURFACE GRINDER	🔒 Subscribe
	YALE		(2) YALE 5-TON CRANES	🔒 Subscribe
	ABELL-HOWE		ABELL-HOWE JIB CRANE	🔒 Subscribe
			25 HP AIR COMPRESSOR WITH A SPARE 25HP MOTOR	🔒 Subscribe
	NEDERMAN		NEDERMAN MIST COLLECTOR	🔒 Subscribe
	ABICOR BINZEL	4	ABICOR BINZEL WELDING GUN #4	🔒 Subscribe
	KELLENBURGER	OD GRINDER	KELLENBURGER OD GRINDER	🔒 Subscribe
	BLUE M ELECTRIC	ESP-400C-5	BLUE M ELECTRIC ESP-400C-5 ANNEALING OVEN S/N:O09F-291555-OF	🔒 Subscribe
	INGERSOL RAND	UP6-15C	ONE INGERSOL RAND UP6-15C AIR COMPRESSOR S/N:CBV187985	🔒 Subscribe
	INGERSOL RAND	UP6-15C	ONE INGERSOL RAND UP6-15C AIR COMPRESSOR S/N:CBV183072	🔒 Subscribe
	HAEGER	HP6	HAEGER PEM SETTER, MODEL HP6 S/N:1508	🔒 Subscribe
	HAAS	TR160Y	HAAS TRUNNION, MODEL TR160Y S/N:906463	🔒 Subscribe
2024	BETENBENDER	12-250	2024 BETENBENDER 12-250 HYDRAULIC GUILLOTINE SHEAR CAPACITY - A-36 MILD STEEL (80,000 LB TENSILE): 1/4" CAPACITY - 304 STAINLESS STEEL (AT HIGHEST RAKE): 1/4" (NON-PRODUCTION) MAIN MOTOR: 15 HP NOMINAL CUTTING LENGTH: 144" NUMBER OF HOLD-DOWNS: 21 KNIVES (4 CUTTING EDGES): 148" X 1" X 4" RAKE OF MOVING BLADE (PER FOOT): 1/4" BACK GAUGE RANGE: 36" STROKES PER MINUTE: 13 CONTROL: NC CONTROL 5-STATION OIL RESERVOIR (HYDRAULIC OIL INCLUDED): 42 GALLONS SHIPPING WEIGHT: 14,000 LBS. SHIPPING DIMS: 61" H X 180" X 80" W VERY MINIMAL USE / VERY LOW HOURS	🔒 Subscribe
2024	HAFFNER	TT-425	2024 HAFFNER TT-425 PROFILE DOUBLE HEAD MITRE SAW CUTTING AREA: 13.1' X 19.6' X 24.6' PIVOT ANGLE RANGE: 90 TO 22.5 (WITH INTERMEDIATE STOPS) TILTING & PIVOTING DEGREE: 90 AND 45 (BY PNEUMATIC CYLINDER) SAW BLADE MOTOR: 5.36 HP X 2 SAW BLADE SPEEDS: 2,800 RPM / 3,400 RPM SAW BLADE DIAMETER: 18.7" MIN CUTTING LENGTH AT 90 & 45: 17.71" PIVOTING RANGE: INWARDS 90- 22.5 WITH ACCURACY UP TO 0.1 TILTING RANGE: INWARDS PNEUMATICALLY 90- 45 COMPRESSED AIR SUPPLY: 100 PSI (7 BAR) AIR CONSUMPTION PER WORKING CYCLE: 2.12 CU. FT. EQUIPPED WITH: PNEUMATIC SAW BLADE FEED SYSTEM WITH ADJUSTABLE BLADE FEED SPEED VERTICAL AND HORIZONTAL PNEUMATIC CLAMPS STANDARD CUTTING LENGTHS VERY MINIMAL USE/VERY LOW HOURS	🔒 Subscribe
2022	LONE STAR CUTTING SOLUTIONS	SPITFIRE PLASMA TABLE	2022 LONE STAR CUTTING SOLUTIONS SPITFIRE PLASMA TABLE; HYPERTHERM POWERMAX 65 - 5' X 10' CUTTING WIDTH: 5' CUTTING LENGTH: 10' GANTRY HEIGHT: 4' MAX TRAVERSE SPEED: 800 IPM POWER SOURCE: HYPERTHERM POWERMAX 65 50 FT TORCH LEAD EQUIPPED WITH HYPERTHERM POWERMAX 65 MAX. PRODUCTION CUT CAPACITY: 1' MILD STEEL, 12' ALUMINUM, 12' STAINLESS	🔒 Subscribe
	WISCONSIN OVEN		650 WISCONSIN OVEN- 110 INCH H X 66 INCH W X 52 INCH D	🔒 Subscribe
2000	BRANDT	KD-94	2000 BRANDT KD-94 EDGE BANDER EDGE THICKNESS CAPACITY (STRIP): 0.4MM - 20MM EDGE THICKNESS CAPACITY (COIL): 0.4MM - 3MM PANEL THICKNESS: 3/8 - 2-3/8 MINIMUM PANEL LENGTH: 6-3/8 MINIMUM PANEL WIDTH: 2-1/2 PANEL HEIGHT: 10MM - 55MM EQUIPPED WITH: SWIVEL OPERATOR CONTROL PANEL	🔒 Subscribe
	MORI SEIKI	ZL-35	MORI SEIKI ZL-35 4 AXIS CNC LATHE, TURNING CENTER SPECIFICATIONS: SWING OVER BED: 23.6 INCH CHUCK SIZE: 12 INCH MAX TURNING DIA.: AROUND 15.4 INCH MAX TURNING LENGTH: AROUND 32.9 INCH SPINDLE SPEED: UP TO 2,500 RPM MOTOR: 40HP CONTROL: MORI SEIKI MSC-501 X-AXIS TRAVEL: 8.9 INCH UPPER TURRET/ 8.3 INCH LOWER TURRET Z-AXIS TRAVEL: 33.7 INCH WEIGHT: AROUND 24,000LBS	🔒 Subscribe

2006 MAZAK MAZATECH FH-8800

CNC MACHINE CENTERS

2006 MAZAK MAZATECH FH-8800 CNC HMC, HORIZONTAL MACHINING CENTER, HORIZONTAL TABLE/PALLET SIZE IN MM...

Hammer Price: 🔒

TROY-BILT 5550

ELECTRICAL AND POWER GENERATION EQUIPMENT

TROY-BILT 5550 GENERATOR...

Hammer Price: 🔒

CRESS C122012K

METALWORKING & FABRICATION EQUIPMENT

CRESS MODEL C122012K ELECTRIC MUFFLE FURNACE...

Hammer Price: 🔒

LINCOLN POWER WAVE 455

WELDING & CUTTING

(2) LINCOLN POWER WAVE 455 WELDERS...

Hammer Price: 🔒

2006 MAZAK NEXUS HCM- 6000 II

CNC MACHINE CENTERS

2006 MAZAK NEXUS HCM- 6000 II CNC HMC, HORIZONTAL MACHINING CENTER, 10,000 RPM MAXIMUM SPINDLE SPEED...

Hammer Price: 🔒

2002 MAZAK MAZATECH FH-6800

CNC MACHINE CENTERS

2002 MAZAK MAZATECH FH-6800 CNC HMC, HORIZONTAL MACHINING CENTER, DUAL PALLETS, SIZE 24.8 INCH X 24....

Hammer Price: 🔒

EZ RAMP

CONSTRUCTION EQUIPMENT

EZ RAMP 20' LONG...

Hammer Price: 🔒

W-5

SURFACE FINISHING EQUIPMENT

GIANT PARTS TUMBLER FOR MATERIAL DEBUR/POLISH W-5 S/N: 3162...

Hammer Price: 🔒

2004 MAZAK NEXUS HCN-6000

CNC MACHINE CENTERS

2004 MAZAK NEXUS HCN-6000 CNC HMC, HORIZONTAL MACHINING CENTER, 10,000 RPM MAXIMUM SPINDLE SPEED, 32...

Hammer Price: 🔒

LINCOLN POWER WAVE

WELDING & CUTTING

LINCOLN POWER WAVE WELDER...

Hammer Price: 🔒

2020 RIMA RS-1012S

PACKAGING EQUIPMENT

2020 RIMA RS-1012S COMPENSATING COUNTER STACKER A DIMENSION 102 MM (4.00) (OPT. 89 MM (3.50)) 320 MM...

Hammer Price: 🔒

EXCALIBUR F3016

FOOD PROCESSING AND RESTAURANT EQUIPMENT

EXCALIBUR MODEL F3016 OVEN...

Hammer Price: 🔒

2020 KITAMURA MYCENTER HX300IG

CNC MACHINE CENTERS

2020 KITAMURA MYCENTER HX300IG HMC - COOLANT THROUGH SPINDLE, SHOWER COOLANT PALLET SIZE: 11.8 X 11....

Hammer Price: 🔒

HTC 1000-12SR

METALWORKING & FABRICATION EQUIPMENT

1" X 12' HTC 1000-12SR SHEAR...

Hammer Price: 🔒

1999 HAAS VF-1

CNC MACHINE CENTERS

1999 HAAS VF-1 CNC VERTICAL MACHINING CENTER. X-AXIS TRAVEL: 20 INCH (508 MM) Y-AXIS TRAVEL: 16 INCH...

Hammer Price: 🔒

2003 FANUC T21ID ROBODRILL

CNC MACHINE CENTERS

2003 FANUC T21ID ROBODRILL VERTICAL MACHINING CENTER, FANUC ROBODRILL A-T21ID, 200/220V 3-PHASE 60HZ...

Hammer Price: 🔒

OKUMA HOWA 2SP-V5

METALWORKING & FABRICATION EQUIPMENT

OKUMA HOWA 2SP-V5 VERTICAL TWIN SPINDLE LATHE, 440V 3-PHASE 60HZ, (2) 12-STATION TURRETS, SWING: 31....

Hammer Price: 🔒

OKUMA HOWA MILLAC 40V

METALWORKING & FABRICATION EQUIPMENT

OKUMA HOWA MILLAC 40V MILLAC 40-V POWER SUPPLY: 240V 3-PHASE 60HZ X-AXIS: 22.8" Y-AXIS: 15.7" Z-AXIS...

Hammer Price: 🔒

2000 MURATA MW-200

CNC MACHINE CENTERS

2000 MURATA MW-200 TWIN SPINDLE CNC, 10" CHUCK SIZE, 7.87" TURNING DIAMETER, 4.72" TURNING LENGTH, 2...

Hammer Price: 🔒

2020 WEINIG VALURIP RIPMAX

WOODWORKING EQUIPMENT

2020 WEINIG VALURIP RIPMAX RIP SAW AUTOMATIC INFEED, 17 POINTS OF WIDTH MEASUREMENT FOR BASIC SHAPE ...

Hammer Price: 🔒

2002 HAAS MINI MILL

CNC MACHINE CENTERS

2002 HAAS MINI MILL X / Y / Z TRAVEL: 16 INCH 12 INCH 10 INCH TABLE SIZE: 36 INCH 12 INCH (3 T-SLOTS...

Hammer Price: 🔒

2004 HAAS SUPER MINI MILL

CNC MACHINE CENTERS

2004 HAAS SUPER MINI MILL - X / Y / Z TRAVELS: 16 INCH 12 INCH 10 INCH. TABLE SIZE: ~36 INCH 12 INCH...

Hammer Price: 🔒

1993 FANUC ROBODRILL A-T10A

CNC MACHINE CENTERS

1993 FANUC ROBODRILL A-T10A VERTICAL MACHINING CENTER, 220V 3-PHASE 60HZ, X-AXIS: 19.6 INCH Y-AXIS: ...

Hammer Price: 🔒

ENSHU JE-50

CNC MACHINE CENTERS

ENSHU JE-50 HORIZONTAL MACHINING CENTER - ENSHU JE-50S PRODUCTION X-AXIS: 19.6 INCH Y-AXIS: 19.6 INC...

Hammer Price: 🔒

ALLSOURCE 41800

SURFACE FINISHING EQUIPMENT

ALLSOURCE ABRASIVE BLAST CABINET 41800...

Hammer Price: 🔒

TELEDYNE OSTER

METALWORKING & FABRICATION EQUIPMENT

TELEDYNE OSTER PIPE/BOLT THREADER...

Hammer Price: 🔒

CAMMANN

METALWORKING & FABRICATION EQUIPMENT

CAMMANN METAL DISINTEGRATOR...

Hammer Price: 🔒

2017 FURIA ITALMAC DOUBLE MITER HORIZONTAL SAW

WOODWORKING EQUIPMENT

2017 FURIA ITALMAC DOUBLE MITER HORIZONTAL SAW LEFT SAW ANGLE-MITER 600MM BLADE RIGHT SAW ANGLE-BEVE...

Hammer Price: 🔒

ITALMAC S7000

METALWORKING & FABRICATION EQUIPMENT

ITALMAC 4 AXIS ALUMINUM EXTRUSION PROFILING MACHINING CENTER SPRING S7000 CNC CONTROLLED. DESIGNED F...

Hammer Price: 🔒

DOOSAN DOOTURN-4

CNC MACHINE CENTERS

DOOSAN DOOTURN-4 CNC LATHE, FANUC KOREA SERIES O-T CONTROL, 220V/ 3 PHASE, MAX TURNING DIAMETER: 15....

Hammer Price: 🔒

2012 HYDMECH VW-18

WOODWORKING EQUIPMENT

2012 HYDMECH VW-18 VERTICAL BAND SAW, 18 INCH X 22 INCH CAPACITY AT 90 DEGREES RECTANGULAR: 22 X 18,...

Hammer Price: 🔒

2021 BESCUTTER LC1530M

LASER ETCHING & ENGRAVING EQUIPMENT

2021 5' X 10' BESCUTTER LC1530M 300W CO2 LASER - INCLUDES S&A CW6000 INDUSTRIAL WATER CHILLER. LASER...

Hammer Price: 🔒

PARKER 6" X 18"

METALWORKING & FABRICATION EQUIPMENT

PARKER 6 INCH X 18 INCH SURFACE GRINDER...

Hammer Price: 🔒

YALE

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

(2) YALE 5-TON CRANES...

Hammer Price: 🔒

ABELL-HOWE

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

ABELL-HOWE JIB CRANE...

Hammer Price: 🔒

AIR COMPRESSORS

25 HP AIR COMPRESSOR WITH A SPARE 25HP MOTOR...

Hammer Price: 🔒

NEDERMAN

DUST COLLECTION EQUIPMENT

NEDERMAN MIST COLLECTOR...

Hammer Price: 🔒

ABICOR BINZEL 4

WELDING & CUTTING

ABICOR BINZEL WELDING GUN #4...

Hammer Price: 🔒

KELLENBURGER OD GRINDER

METALWORKING & FABRICATION EQUIPMENT

KELLENBURGER OD GRINDER...

Hammer Price: 🔒

BLUE M ELECTRIC ESP-400C-5

INDUSTRIAL AND COOLING HEATING EQUIPMENT

BLUE M ELECTRIC ESP-400C-5 ANNEALING OVEN S/N:O09F-291555-OF...

Hammer Price: 🔒

INGERSOL RAND UP6-15C

AIR COMPRESSORS

ONE INGERSOL RAND UP6-15C AIR COMPRESSOR S/N:CBV187985...

Hammer Price: 🔒

INGERSOL RAND UP6-15C

AIR COMPRESSORS

ONE INGERSOL RAND UP6-15C AIR COMPRESSOR S/N:CBV183072...

Hammer Price: 🔒

HAEGER HP6

METALWORKING & FABRICATION EQUIPMENT

HAEGER PEM SETTER, MODEL HP6 S/N:1508...

Hammer Price: 🔒

HAAS TR160Y

METALWORKING & FABRICATION EQUIPMENT

HAAS TRUNNION, MODEL TR160Y S/N:906463...

Hammer Price: 🔒

2024 BETENBENDER 12-250

PRESSES & FORMING

2024 BETENBENDER 12-250 HYDRAULIC GUILLOTINE SHEAR CAPACITY - A-36 MILD STEEL (80,000 LB TENSILE): 1...

Hammer Price: 🔒

2024 HAFFNER TT-425

WOODWORKING EQUIPMENT

2024 HAFFNER TT-425 PROFILE DOUBLE HEAD MITRE SAW CUTTING AREA: 13.1' X 19.6' X 24.6' PIVOT ANGLE RA...

Hammer Price: 🔒

2022 LONE STAR CUTTING SOLUTIONS SPITFIRE PLASMA TABLE

METALWORKING & FABRICATION EQUIPMENT

2022 LONE STAR CUTTING SOLUTIONS SPITFIRE PLASMA TABLE; HYPERTHERM POWERMAX 65 - 5' X 10' CUTTING WI...

Hammer Price: 🔒

WISCONSIN OVEN

INDUSTRIAL AND COOLING HEATING EQUIPMENT

650 WISCONSIN OVEN- 110 INCH H X 66 INCH W X 52 INCH D...

Hammer Price: 🔒

2000 BRANDT KD-94

WOODWORKING EQUIPMENT

2000 BRANDT KD-94 EDGE BANDER EDGE THICKNESS CAPACITY (STRIP): 0.4MM - 20MM EDGE THICKNESS CAPACITY ...

Hammer Price: 🔒

MORI SEIKI ZL-35

CNC MACHINE CENTERS

MORI SEIKI ZL-35 4 AXIS CNC LATHE, TURNING CENTER SPECIFICATIONS: SWING OVER BED: 23.6 INCH CHUCK SI...

Hammer Price: 🔒

<< Previous 1 2 3 Next >>

Disclaimer: BidSeek aggregates publicly available auction and liquidation results from independent third-party sources for research and valuation reference only. BidSeek is not affiliated with, endorsed by, sponsored by, or operated in connection with any auction house, marketplace, or liquidation firm. All data and images are provided as-is for informational purposes and remain the property of their respective owners.

Recent Searches

Login

Reset Password

CNC and Fabrication Machinery Surplus in Multiple Locations

Save to Project Folder

Print Options

Save to Project Folder