CNC and Fabrication Machinery Surplus in Multiple Locations

Revelation Auctions

Category: CNC MACHINE CENTERS

Total Lots: 141

Total Sales: 🔒 Subscribe

Lot Price Distribution

🔒

Subscribe to view

Unlock price distribution and full auction analytics

Sort:

Showing 101–141 of 141 lots

Year	Make	Model	Lot Description	Hammer Price
2008	OKUMA	IMPACT LU-45	2008 OKUMA IMPACT LU-45 CNC LATHE, TURNING CENTER, 12 POSITION UPPER TURRET/ 10 POSITION LOWER TURRET, CHUCK SIZE 15 INCH, BAR CAPACITY 4 INCH, SWING 33.07 INCH, TURNING DIAMETER 25.59 INCH, SPINDLE SPEED 2,800 RPM, CONTROL OSP-P200L, DISTANCE BETWEEN CENTERS 79 INCH, SPINDLE MOTOR 60 HP 2008 · OKUMA · IMPACT LU-45	🔒 Subscribe
2007	MORI SEIKI	ZL-35B/750	2007 MORI SEIKI ZL-35B/750 4 AXIS CNC LATHE, TURNING CENTER, MAX TURNING DIAMETER: 16.5 MAX TURNING LENGTH: 30.7 MAX BAR CAPACITY: 3.65 SWING OVER SLIDE: 16.7 SWING OVER BED: 23.6 DISTANCE BETWEEN CENTERS: 35.6 X AXIS TRAVEL: 9.45 Z AXIS TRAVEL: 33.7 RAPID TRAVERSE X AXIS: 472 IPM RAPID TRAVERSE Z AXIS: 590 IPM SPINDLE NOSE: A2-8 SPINDLE BORE: 4.13 SPINDLE SPEED: 2500 RPM SPINDLE MOTOR: 30 HP TURRET CAPACITY: 10 STATIONS TURRET INDEX TIME: 1 SECOND MAIN CIRCUIT: 3 PHASE 220V 60HZ CHUCK SIZE: 12 INCH BAR CAPACITY: 2.75 INCH CONTROL: MORI MSC-501 CONTROL 4 AXIS TURNING CAPABILITY WEIGHT: 24,250 LBS 2007 · MORI SEIKI · ZL-35B/750	🔒 Subscribe
2023	BIESSE	AKRON 1330 A	2023 BIESSE AKRON 1330 A SINGLE SIDED EDGEBANDER. PANEL THICKNESS RANGE: 0.39 TO 2.36 INCH. EDGE BANDING HEIGHT: 0.55 TO 2.52 INCH. EDGE THICKNESS: ROLLS: 0.016 TO 0.12 INCH, STRIPS: 0.016 TO 0.20 INCH. PANEL LENGTH RANGE: 5.91 TO 125.98 INCH. FEED SPEED: UP TO 472.4. MACHINE LENGTH: 205.2 INCH. PRE-MILLING UNIT (RT02): TWO 2.41 HP MOTORS AT 12,000 RPM. GLUING UNIT (SP03): HYBRID CHUCK FOR EVA/PUR GLUE. END TRIMMING UNIT (IT03): ONE 1 HP MOTOR AT 12,000 RPM. FINE TRIMMING UNIT (RF02): TWO 0.87 HP MOTORS AT 12,000 RPM. CORNER ROUNDING UNIT (AR02): TWO 0.87 HP MOTORS AT 12,000 RPM. EDGE SCRAPER UNIT (RB02). GLUE SCRAPER UNIT (RC02). BRUSHING UNIT (SZ02): TWO 0.5 HP MOTORS AT 2,800 RPM. S/N: 1000057915 2023 · BIESSE · AKRON 1330 A	🔒 Subscribe
2023	BIESSE SELCO	SK 4	2023 BIESSE SELCO SK 4 PANEL SAW, CNC-CONTROLLED AUTOMATIC PANEL BEAM SAW, MAX SAW BLADE PROJECTION: SK 450 MODEL: 2.95 INCH, SK 470 MODEL: 3.54 INCH, SAW CARRIAGE SPEED: 39 INCH TO 4,724 INCH, PUSHER SPEED: 2,362 INCH PER MINUTE, DRIVE SYSTEM: BRUSHLESS MOTOR WITH HELICAL RACK AND PINION FOR LINEAR MOTION, BLADE VIBRATION CONTROL: UPPER GUIDE NEXT TO BLADE-HOLDER SPINDLE, CUTTING AREA OPTIONS: 125.98 INCH, 149.6 INCH, 169.3 INCH, 173.2 INCH 2023 · BIESSE SELCO · SK 4	🔒 Subscribe
2023	BIESSE	ROVER AS 15	2023 BIESSE ROVER AS 15 CNC POD & RAIL MACHINING CENTER, 17.4 HP SPINDLE POWER, UP TO 20,000 RPM SPINDLE SPEED, HSK F63 TOOL INTERFACE, 13-POSITION REVOLVER TOOL CHANGER, 11.8" SAWBLADE CAPACITY. WORKING AREA: 123.6" X-AXIS TRAVEL, 61.4" Y-AXIS TRAVEL (4-AXIS), 61.8" Y-AXIS TRAVEL (5-AXIS), 7.87" TO 9.65" Z-AXIS TRAVEL. TABLE LENGTH: 59.1". WORKHOLDING: 6 ATS SUPPORTS, 24 SLIDING BASES, 4.53" REAR STOPS, MIDDLE STOPS, SIDE STOPS, 4 LIFTING BARS. S/N: 1000055478 2023 · BIESSE · ROVER AS 15	🔒 Subscribe
1968	WEIDEMATIC	1520	1968 WEIDEMATIC 1520 TURRET PUNCH 1968 · WEIDEMATIC · 1520	🔒 Subscribe
1999	MURATA	M-2044	1999 MURATA M-2044 TURRET PUNCH 1999 · MURATA · M-2044	🔒 Subscribe
	ABICOR BINZEL		ABICOR BINZEL WELDING GUN #1 ABICOR BINZEL	🔒 Subscribe
	ABICOR BINZEL	2	ABICOR BINZEL WELDING GUN #2 ABICOR BINZEL · 2	🔒 Subscribe
	ABICOR BINZEL	3	ABICOR BINZEL WELDING GUN #3 ABICOR BINZEL · 3	🔒 Subscribe
	TRUMPF	TRUPULSE 2005 NANO (FK10-RM)	TRUMPF TRUPULSE 2005 NANO (FK10-RM) LASER PARAMETERS AVERAGE OUTPUT POWER: 50 W MAXIMUM PEAK PULSE POWER: > 10 KW BEAM QUALITY (M2): < 1.6 WAVELENGTH SPECTRUM: 1059 NM - 1065 NM MAXIMUM PULSE ENERGY: > 1 MJ PULSE DURATION RANGE: 26 NS - 250 NS PULSE REPETITION FREQUENCY: 1 KHZ - 500 KHZ STRUCTURAL DESIGN DIMENSIONS (W X H X D): 347 MM X 201 MM X 95 MM INSTALLATION AMBIENT TEMPERATURE: 0 C - 40 C TRUMPF · TRUPULSE 2005 NANO (FK10-RM)	🔒 Subscribe
	TRUMPF	TRUPULSE 2005 NANO (FK10-RM)	TRUMPF TRUPULSE 2005 NANO (FK10-RM) LASER PARAMETERS AVERAGE OUTPUT POWER: 50 W MAXIMUM PEAK PULSE POWER: > 10 KW BEAM QUALITY (M2): < 1.6 WAVELENGTH SPECTRUM: 1059 NM - 1065 NM MAXIMUM PULSE ENERGY: > 1 MJ PULSE DURATION RANGE: 26 NS - 250 NS PULSE REPETITION FREQUENCY: 1 KHZ - 500 KHZ STRUCTURAL DESIGN DIMENSIONS (W X H X D): 347 MM X 201 MM X 95 MM INSTALLATION AMBIENT TEMPERATURE: 0 C - 40 C TRUMPF · TRUPULSE 2005 NANO (FK10-RM)	🔒 Subscribe
2020	MULTICAM	APEX3R	2020 MULTICAM APEX3R CNC ROUTER: 3 AXIS, 84" TABLE WIDTH, 144" TABLE LENGTH, VACUUM HOLD DOWN (4-ZONES), HSD SPINDLE ER32, 10 HP SPINDLE MOTOR, 24,000 RPM SPINDLE SPEED, (11) POSITION LINEAR TOOL RACK, MULTICAM CONTROLLER, 208V/220V - 3PH POWER REQUIREMENT, 24.4 HP KINETIC BLOWER, DIGITAL BRUSHLESS A/C DIGITAL SERVO DRIVES, LOCATER PINS (FRONT RIGHT), SET OF 3 AUTO MISTING / LUBRICATING SYSTEM, LASER POINTER CROSS - HAIR, SURFACE PROBE & AUTO CALIBRATION SENSOR, DUST COLLECTOR 2020 · MULTICAM · APEX3R	🔒 Subscribe
1996	DAEWOO	ACE-V35	1996 DAEWOO ACE-V35 CNC MACHINING CENTER X=22 INCH Y=22 INCH Z=18 INCH 1996 · DAEWOO · ACE-V35	🔒 Subscribe
	KINGSTON	HJ-1700	KINGSTON MODEL HJ-1700 CENTER ENGINE LATHE 10 INCH DIA X 60 INCH L KINGSTON · HJ-1700	🔒 Subscribe
	LAGUN	FTV-2S	LAGUN MODEL FTV-2S VERTICAL MILLING MACHINE (MANUAL) X=33 INCH Y=16 INCH Z=20 INCH LAGUN · FTV-2S	🔒 Subscribe
			FLOW BENCH - REFURBED	🔒 Subscribe
	TRUMPF	TRUPULSE 2005 NANO (FK10-RM)	TRUMPF TRUPULSE 2005 NANO (FK10-RM) LASER PARAMETERS AVERAGE OUTPUT POWER: 50 W MAXIMUM PEAK PULSE POWER: > 10 KW BEAM QUALITY (M2): < 1.6 WAVELENGTH SPECTRUM: 1059 NM - 1065 NM MAXIMUM PULSE ENERGY: > 1 MJ PULSE DURATION RANGE: 26 NS - 250 NS PULSE REPETITION FREQUENCY: 1 KHZ - 500 KHZ STRUCTURAL DESIGN DIMENSIONS (W X H X D): 347 MM X 201 MM X 95 MM INSTALLATION AMBIENT TEMPERATURE: 0 C - 40 C TRUMPF · TRUPULSE 2005 NANO (FK10-RM)	🔒 Subscribe
2022	LAGUNA TOOLS	SMARTSHOP LD4	2022 LAGUNA TOOLS SMARTSHOP LD4 CNC ROUTER / LOCKDOWEL MACHINE - 1- 5MM BORING AND INSERTING UNIT WITH VIBRATORY HOPPER, 1-8MM BORING AND INSERTING UNIT WITH VIBRATORY HOPPER, POWER: 208V-220V, 3 PHASE, 30 AMPS, 96 MAXIMUM WORK ZONE, 3-AXIS CONTROL FOR POSITIONING, WEIGHT 6,000LBS, SOLID ONE-PIECE WELDED TUBULAR STEEL FRAME, FOOTPRINT (L X W X H): 135 X 45 X 82, SHIPPING DIMENSIONS (L X W X H): 42.3 X 49 X 43, SHIPPING WEIGHT: 7500 LBS 2022 · LAGUNA TOOLS · SMARTSHOP LD4	🔒 Subscribe
2002	VERONA	PF-CNC PLATINUM	2002 VERONA PF-CNC PLATINUM 5 AXIS CNC STONE BRIDGE SAW MAX DIAMETER OF SAW BLADE 17.5 INCH CUTTING DEPTH 4.7 INCH MAX LIFTING TRAVEL OF CUTTER 9.8 INCH POWER OF BLADE MOTOR 25 HP WATER CONSUMPTION 2 M3/H GROSS POWER 28.5 HP WATER PRESSURE 0.2 MPA SUCTION CUP HEAD ATTACHMENT MILLING BIT SPINDLE FOR SINK OPENING 0 TO 360 DEGREES OF HEAD ROTATION 0 TO 90 DEGREES OF HEAD TILTING 0 TO 85 DEGREES OF TABLE TILTING 2 LANGUAGES FOR EASY OPERATION: ENGLISH, ITALIAN. 2002 · VERONA · PF-CNC PLATINUM	🔒 Subscribe
2005	DAVI	YSTAD	2005 DAVI YSTAD 1/4 X 10 BIDIRECTIONAL CNC FOLDING SYSTEM - W/ AUTOLOAD UNLOAD BEND WIDTH: 10 BEND THICKNESS: 1/4 MAX BEND ANGLE: 135 DEGREES BACK GAUGE TABLE SIZE: 10 X 10 STROKE OF UPPER BENDING BEAM: 28 OF TRAVEL ELECTRICAL: 460 V / 3 PH EQUIPPED WITH: MITSUBISHI CONTROLLER, 10 AXIS SYSTEM, CNC CROWNING ON TOP AND BOTTOM, 10 X 10 BACK GAUGE TABLE, FLAT BLANK LOAD AND PARTS UNLOAD SYSTEM, DATA M LASER BEND ANGLE CONTROL 2005 · DAVI · YSTAD	🔒 Subscribe
	VIRTEK		VIRTEK INSPECTION MEASURING LASER SCANNER SCANNING ACCURACY (2D): 0.002 SCANNING ACCURACY HEIGHT MEASUREMENTS: 0.010 MAX PART THICKNESS: 7.87 / 12.0 SYSTEM SCAN TABLE SIZE: 47.24 X 47.24 OPERATING TEMPERATURE: 50 TO 104 F LASER PROJECTOR DIMENSIONS: 40.3 X 8.7 X 7 LASER PROJECTOR WEIGHT: 36 LBS VIRTEK	🔒 Subscribe
2023	DAIKEN	ALPHA 10	2023 DAIKEN ALPHA 10 SLIDING TABLE SAW 7.5 HP 220 VOLT THREE PHASE MAIN MOTOR 3/4 HP SCORING MOTOR 3000 / 4000 / 5000 RPM MAIN BLADE (3 SPEEDS DEPENDING ON BLADE SIZE) 8000 RPM SCORING BLADE 130MM CUT (90) 90MM CUT (45) 1250MM MAX RIP CAPACITY HEAVY DUTY 3200MM X 418MM ALUMINUM SLIDING TABLE FLOOR SPACE 145 WIDE X 140 LONG X 34.5 TABLE HEIGHT SHOP SPACE REQUIRED TO OPERATE SAW 264 X 228 X 58 SHIPPING DIMENSIONS (SAW 90.5 X 47 X 36) (TABLE 142 X 20 X 11) 1914 POUNDS SHIPPING WEIGHT (1672 POUNDS NET WEIGHT) 2023 · DAIKEN · ALPHA 10	🔒 Subscribe
	MITUOYO	B706	MITUOYO B706 CMM MITUOYO · B706	🔒 Subscribe
	OKK	MCH8001	OKK MCH8001 HORIZONTAL MILLING MACHINE X-AXIS TRAVEL: ~1,300 MM (51.2 IN) Y-AXIS TRAVEL: ~1,200 MM (47.2 IN) Z-AXIS TRAVEL: ~1,200 MM (47.2 IN) TABLE SIZE: APPROX 800 800 MM (31.5 31.5 IN) TABLE LOAD CAPACITY: 6,600 LBS SPINDLE SPEED: 6,000 RPM SPINDLE MOTOR: 25 HP RAPID TRAVERSE: 944 IPM S/N:MA73628A OKK · MCH8001	🔒 Subscribe
	OKUMA HOWA	2SP-V35	OKUMA HOWA 2SP-V35 VERTICAL TWIN SPINDLE LATHE, SUPPLY VOLTAGE: 480V 3-PHASE 60HZ, EQUIPPED WITH (2) 12-STATION TURRETS, SWING: 24 INCH, MACHINING CUTTING DIA.: 22 INCH, MACHINING LENGTH: 17 INCH, # OF AXIS: 4, X-AXIS: 10.4 INCH, Z-AXIS: 17.7 INCH, BAR CAPACITY: 4.33 INCH, POWER: 30HP, MAX RPM: 20- 2,500 RPM, TURNING DIA. 21.6 INCH, APPROXIMATE WEIGHT: 30,800 LBS, FANUC 18I-T CNC CONTROL OKUMA HOWA · 2SP-V35	🔒 Subscribe
	ENSHU	JE-40	ENSHU JE-40 HORIZONTAL MACHINING CENTER X-AXIS: 15.7 INCH Y-AXIS: 19.7 INCH Z-AXIS: 15.7 INCH (2) 15.7 INCH SQUARE PALLETS MAX PALLET LOAD: 880 LBS 10,000 RPM SPINDLE SPEED SPINDLE TAPER #40 30 STATION TOOL CHANGER APPROXIMATE WEIGHT: 12,000 FANUC 18M CNC CONTROL ENSHU · JE-40	🔒 Subscribe
	OKK	PCV-60	OKK PCV-60 VERTICAL MACHINING CENTER OKK · PCV-60	🔒 Subscribe
	NOMURA	B-100WP 4	NOMURA B-100WP 4 HORIZONTAL TABLE-TYPE BORING MILL - 20 HP, 96 48 TABLE, HEAVY-DUTY PRECISION MILLING MACHINE SPINDLE DIAMETER 4 (3.94 IN) SPINDLE TAPER #50 TAPER SPINDLE SPEED UP TO 1,200 RPM SPINDLE MOTOR POWER 20 HP TABLE SIZE (L W) 96 48 (DUAL SLIDES) TABLE CROSS TRAVEL (X) 98 TABLE LONGITUDINAL TRAVEL (Z) 48 VERTICAL HEAD TRAVEL (Y) 60 SPINDLE (BAR) TRAVEL ~2736 (DEPENDS ON CONFIGURATION) NEEDS NEW CONTROL* MACHINE WEIGHT ~13,500 LBS NOMURA · B-100WP 4	🔒 Subscribe
	GARDNER DENVER		GARDNER DENVER AIR DRYER FOR A 25 HP SCREW AIR COMPRESSOR GARDNER DENVER	🔒 Subscribe
			36" FORKLIFT FORKS	🔒 Subscribe
	YALE		1/2-TON YALE CRANE YALE	🔒 Subscribe
			36 INCH ROTARY TABLE	🔒 Subscribe
	FERRO FIVE		FERRO FIVE FORKLIFT BATTERY CHARGER FERRO FIVE	🔒 Subscribe
	LUCAS	542B-60	LUCAS 542B-60 HORIZONTAL BORING MILL LUCAS · 542B-60	🔒 Subscribe
2011	AMADA	FOM23015NT	2011 AMADA FOM23015NT CO2 LASER TYPE: CO2 LASER, FANUC / AF-SERIES RESONATOR (E.G. AF-4000I) LASER POWER: ~ 4000 W (4 KW) CUTTING AREA (X Y): APPROX. 3000 X 1500 MM (118 X 59 IN) Z-AXIS / FOCAL RANGE: ~200 MM TRAVEL FRAME / TABLE: SHUTTLE STYLE TABLE OPTIONS; CAPABLE OF SUPPORTING A SIGNIFICANT SHEET WEIGHT DEPENDING ON CONFIGURATION. WORKPIECE SIZE: SHEET SIZE UP TO ~ 510 (1524 X 3048 MM) 2011 · AMADA · FOM23015NT	🔒 Subscribe
	ABICOR BINZEL	5	ABICOR BINZEL WELDING GUN #5 ABICOR BINZEL · 5	🔒 Subscribe
	WISCONSIN	SWN-75-5E3	350 WISCONSIN SWN-75-5E3 OVEN - 84 INCH X 60 INCH X 66 INCH INTERIOR 350 RECIRCULATING WALK-IN OVEN COMPLETE WITH HORIZONTAL AIR FLOW, TOP-MOUNT RECIRCULATING FAN, POWERED EXHAUSTER, AND DOUBLE SWING-OUT FRONT DOORS. HONEYWELL DIGITAL TEMP CONTROL ELECTRICAL 208V 3PH 60HZ WISCONSIN · SWN-75-5E3	🔒 Subscribe
	GRIEVE		GRIEVE OVEN CAN GET UP TO 650 DEGREES GRIEVE	🔒 Subscribe
1992	KOMO	VR508	1992 KOMO VR508 CNC ROUTER TABLE SIZE: 96 X 60 X-AXIS: 111 Y-AXIS: 84 Z-AXIS: 11 FEED RATE (X,Y): 3150 IPM FEED RATE (Z): 600 IPM REPEATABILITY: +- 0.0004 ACCURACY: +- 0.0008 SPINDLE POWER: 12 HP SPINDLE SPEED: 6000-24000 RPM SPINDLE TAPER: ISO 30 ATC: 12 POSITION CAROUSEL MAX TOOL DIAMETER: 6.5 MAX TOOL WEIGHT: 12 LBS / 96 LBS MAX VACUUM PUMP(2): 10 HP ESTIMATED DIMENSIONS: 120 X 204 X 84 ESTIMATED WEIGHT: 8000 LBS EQUIPPED WITH: (2) 10 HP VACUUM PUMPS GE FANUC CONTROL 1992 · KOMO · VR508	🔒 Subscribe
1990	MORI SEIKI	MV 65/50	1990 MORI SEIKI MV 65/50 VERTICAL MACHINING CENTER X AXIS: 50 Y AXIS: 25.6 Z AXIS: 25.6 TABLE SIZE: 66 26 SPINDLE MOTOR POWER: 25 HP MAXIMUM SPINDLE SPEED: 4,000 RPM SPINDLE TAPER: CAT 50 TOOL CHANGER CAPACITY: 30 TOOLS TOOL CHANGE TIME: 2/3 SECOND RAPID TRAVERSE (X & Y): 590 IPM RAPID TRAVERSE (Z): 472 IPM WEIGHT: 29,800 LBS MACHINE DIMENSIONS (L W H): 172 152 124 1990 · MORI SEIKI · MV 65/50	🔒 Subscribe

Year	Make	Model	Description	Price
2008	OKUMA	IMPACT LU-45	2008 OKUMA IMPACT LU-45 CNC LATHE, TURNING CENTER, 12 POSITION UPPER TURRET/ 10 POSITION LOWER TURRET, CHUCK SIZE 15 INCH, BAR CAPACITY 4 INCH, SWING 33.07 INCH, TURNING DIAMETER 25.59 INCH, SPINDLE SPEED 2,800 RPM, CONTROL OSP-P200L, DISTANCE BETWEEN CENTERS 79 INCH, SPINDLE MOTOR 60 HP	🔒 Subscribe
2007	MORI SEIKI	ZL-35B/750	2007 MORI SEIKI ZL-35B/750 4 AXIS CNC LATHE, TURNING CENTER, MAX TURNING DIAMETER: 16.5 MAX TURNING LENGTH: 30.7 MAX BAR CAPACITY: 3.65 SWING OVER SLIDE: 16.7 SWING OVER BED: 23.6 DISTANCE BETWEEN CENTERS: 35.6 X AXIS TRAVEL: 9.45 Z AXIS TRAVEL: 33.7 RAPID TRAVERSE X AXIS: 472 IPM RAPID TRAVERSE Z AXIS: 590 IPM SPINDLE NOSE: A2-8 SPINDLE BORE: 4.13 SPINDLE SPEED: 2500 RPM SPINDLE MOTOR: 30 HP TURRET CAPACITY: 10 STATIONS TURRET INDEX TIME: 1 SECOND MAIN CIRCUIT: 3 PHASE 220V 60HZ CHUCK SIZE: 12 INCH BAR CAPACITY: 2.75 INCH CONTROL: MORI MSC-501 CONTROL 4 AXIS TURNING CAPABILITY WEIGHT: 24,250 LBS	🔒 Subscribe
2023	BIESSE	AKRON 1330 A	2023 BIESSE AKRON 1330 A SINGLE SIDED EDGEBANDER. PANEL THICKNESS RANGE: 0.39 TO 2.36 INCH. EDGE BANDING HEIGHT: 0.55 TO 2.52 INCH. EDGE THICKNESS: ROLLS: 0.016 TO 0.12 INCH, STRIPS: 0.016 TO 0.20 INCH. PANEL LENGTH RANGE: 5.91 TO 125.98 INCH. FEED SPEED: UP TO 472.4. MACHINE LENGTH: 205.2 INCH. PRE-MILLING UNIT (RT02): TWO 2.41 HP MOTORS AT 12,000 RPM. GLUING UNIT (SP03): HYBRID CHUCK FOR EVA/PUR GLUE. END TRIMMING UNIT (IT03): ONE 1 HP MOTOR AT 12,000 RPM. FINE TRIMMING UNIT (RF02): TWO 0.87 HP MOTORS AT 12,000 RPM. CORNER ROUNDING UNIT (AR02): TWO 0.87 HP MOTORS AT 12,000 RPM. EDGE SCRAPER UNIT (RB02). GLUE SCRAPER UNIT (RC02). BRUSHING UNIT (SZ02): TWO 0.5 HP MOTORS AT 2,800 RPM. S/N: 1000057915	🔒 Subscribe
2023	BIESSE SELCO	SK 4	2023 BIESSE SELCO SK 4 PANEL SAW, CNC-CONTROLLED AUTOMATIC PANEL BEAM SAW, MAX SAW BLADE PROJECTION: SK 450 MODEL: 2.95 INCH, SK 470 MODEL: 3.54 INCH, SAW CARRIAGE SPEED: 39 INCH TO 4,724 INCH, PUSHER SPEED: 2,362 INCH PER MINUTE, DRIVE SYSTEM: BRUSHLESS MOTOR WITH HELICAL RACK AND PINION FOR LINEAR MOTION, BLADE VIBRATION CONTROL: UPPER GUIDE NEXT TO BLADE-HOLDER SPINDLE, CUTTING AREA OPTIONS: 125.98 INCH, 149.6 INCH, 169.3 INCH, 173.2 INCH	🔒 Subscribe
2023	BIESSE	ROVER AS 15	2023 BIESSE ROVER AS 15 CNC POD & RAIL MACHINING CENTER, 17.4 HP SPINDLE POWER, UP TO 20,000 RPM SPINDLE SPEED, HSK F63 TOOL INTERFACE, 13-POSITION REVOLVER TOOL CHANGER, 11.8" SAWBLADE CAPACITY. WORKING AREA: 123.6" X-AXIS TRAVEL, 61.4" Y-AXIS TRAVEL (4-AXIS), 61.8" Y-AXIS TRAVEL (5-AXIS), 7.87" TO 9.65" Z-AXIS TRAVEL. TABLE LENGTH: 59.1". WORKHOLDING: 6 ATS SUPPORTS, 24 SLIDING BASES, 4.53" REAR STOPS, MIDDLE STOPS, SIDE STOPS, 4 LIFTING BARS. S/N: 1000055478	🔒 Subscribe
1968	WEIDEMATIC	1520	1968 WEIDEMATIC 1520 TURRET PUNCH	🔒 Subscribe
1999	MURATA	M-2044	1999 MURATA M-2044 TURRET PUNCH	🔒 Subscribe
	ABICOR BINZEL		ABICOR BINZEL WELDING GUN #1	🔒 Subscribe
	ABICOR BINZEL	2	ABICOR BINZEL WELDING GUN #2	🔒 Subscribe
	ABICOR BINZEL	3	ABICOR BINZEL WELDING GUN #3	🔒 Subscribe
	TRUMPF	TRUPULSE 2005 NANO (FK10-RM)	TRUMPF TRUPULSE 2005 NANO (FK10-RM) LASER PARAMETERS AVERAGE OUTPUT POWER: 50 W MAXIMUM PEAK PULSE POWER: > 10 KW BEAM QUALITY (M2): < 1.6 WAVELENGTH SPECTRUM: 1059 NM - 1065 NM MAXIMUM PULSE ENERGY: > 1 MJ PULSE DURATION RANGE: 26 NS - 250 NS PULSE REPETITION FREQUENCY: 1 KHZ - 500 KHZ STRUCTURAL DESIGN DIMENSIONS (W X H X D): 347 MM X 201 MM X 95 MM INSTALLATION AMBIENT TEMPERATURE: 0 C - 40 C	🔒 Subscribe
	TRUMPF	TRUPULSE 2005 NANO (FK10-RM)	TRUMPF TRUPULSE 2005 NANO (FK10-RM) LASER PARAMETERS AVERAGE OUTPUT POWER: 50 W MAXIMUM PEAK PULSE POWER: > 10 KW BEAM QUALITY (M2): < 1.6 WAVELENGTH SPECTRUM: 1059 NM - 1065 NM MAXIMUM PULSE ENERGY: > 1 MJ PULSE DURATION RANGE: 26 NS - 250 NS PULSE REPETITION FREQUENCY: 1 KHZ - 500 KHZ STRUCTURAL DESIGN DIMENSIONS (W X H X D): 347 MM X 201 MM X 95 MM INSTALLATION AMBIENT TEMPERATURE: 0 C - 40 C	🔒 Subscribe
2020	MULTICAM	APEX3R	2020 MULTICAM APEX3R CNC ROUTER: 3 AXIS, 84" TABLE WIDTH, 144" TABLE LENGTH, VACUUM HOLD DOWN (4-ZONES), HSD SPINDLE ER32, 10 HP SPINDLE MOTOR, 24,000 RPM SPINDLE SPEED, (11) POSITION LINEAR TOOL RACK, MULTICAM CONTROLLER, 208V/220V - 3PH POWER REQUIREMENT, 24.4 HP KINETIC BLOWER, DIGITAL BRUSHLESS A/C DIGITAL SERVO DRIVES, LOCATER PINS (FRONT RIGHT), SET OF 3 AUTO MISTING / LUBRICATING SYSTEM, LASER POINTER CROSS - HAIR, SURFACE PROBE & AUTO CALIBRATION SENSOR, DUST COLLECTOR	🔒 Subscribe
1996	DAEWOO	ACE-V35	1996 DAEWOO ACE-V35 CNC MACHINING CENTER X=22 INCH Y=22 INCH Z=18 INCH	🔒 Subscribe
	KINGSTON	HJ-1700	KINGSTON MODEL HJ-1700 CENTER ENGINE LATHE 10 INCH DIA X 60 INCH L	🔒 Subscribe
	LAGUN	FTV-2S	LAGUN MODEL FTV-2S VERTICAL MILLING MACHINE (MANUAL) X=33 INCH Y=16 INCH Z=20 INCH	🔒 Subscribe
			FLOW BENCH - REFURBED	🔒 Subscribe
	TRUMPF	TRUPULSE 2005 NANO (FK10-RM)	TRUMPF TRUPULSE 2005 NANO (FK10-RM) LASER PARAMETERS AVERAGE OUTPUT POWER: 50 W MAXIMUM PEAK PULSE POWER: > 10 KW BEAM QUALITY (M2): < 1.6 WAVELENGTH SPECTRUM: 1059 NM - 1065 NM MAXIMUM PULSE ENERGY: > 1 MJ PULSE DURATION RANGE: 26 NS - 250 NS PULSE REPETITION FREQUENCY: 1 KHZ - 500 KHZ STRUCTURAL DESIGN DIMENSIONS (W X H X D): 347 MM X 201 MM X 95 MM INSTALLATION AMBIENT TEMPERATURE: 0 C - 40 C	🔒 Subscribe
2022	LAGUNA TOOLS	SMARTSHOP LD4	2022 LAGUNA TOOLS SMARTSHOP LD4 CNC ROUTER / LOCKDOWEL MACHINE - 1- 5MM BORING AND INSERTING UNIT WITH VIBRATORY HOPPER, 1-8MM BORING AND INSERTING UNIT WITH VIBRATORY HOPPER, POWER: 208V-220V, 3 PHASE, 30 AMPS, 96 MAXIMUM WORK ZONE, 3-AXIS CONTROL FOR POSITIONING, WEIGHT 6,000LBS, SOLID ONE-PIECE WELDED TUBULAR STEEL FRAME, FOOTPRINT (L X W X H): 135 X 45 X 82, SHIPPING DIMENSIONS (L X W X H): 42.3 X 49 X 43, SHIPPING WEIGHT: 7500 LBS	🔒 Subscribe
2002	VERONA	PF-CNC PLATINUM	2002 VERONA PF-CNC PLATINUM 5 AXIS CNC STONE BRIDGE SAW MAX DIAMETER OF SAW BLADE 17.5 INCH CUTTING DEPTH 4.7 INCH MAX LIFTING TRAVEL OF CUTTER 9.8 INCH POWER OF BLADE MOTOR 25 HP WATER CONSUMPTION 2 M3/H GROSS POWER 28.5 HP WATER PRESSURE 0.2 MPA SUCTION CUP HEAD ATTACHMENT MILLING BIT SPINDLE FOR SINK OPENING 0 TO 360 DEGREES OF HEAD ROTATION 0 TO 90 DEGREES OF HEAD TILTING 0 TO 85 DEGREES OF TABLE TILTING 2 LANGUAGES FOR EASY OPERATION: ENGLISH, ITALIAN.	🔒 Subscribe
2005	DAVI	YSTAD	2005 DAVI YSTAD 1/4 X 10 BIDIRECTIONAL CNC FOLDING SYSTEM - W/ AUTOLOAD UNLOAD BEND WIDTH: 10 BEND THICKNESS: 1/4 MAX BEND ANGLE: 135 DEGREES BACK GAUGE TABLE SIZE: 10 X 10 STROKE OF UPPER BENDING BEAM: 28 OF TRAVEL ELECTRICAL: 460 V / 3 PH EQUIPPED WITH: MITSUBISHI CONTROLLER, 10 AXIS SYSTEM, CNC CROWNING ON TOP AND BOTTOM, 10 X 10 BACK GAUGE TABLE, FLAT BLANK LOAD AND PARTS UNLOAD SYSTEM, DATA M LASER BEND ANGLE CONTROL	🔒 Subscribe
	VIRTEK		VIRTEK INSPECTION MEASURING LASER SCANNER SCANNING ACCURACY (2D): 0.002 SCANNING ACCURACY HEIGHT MEASUREMENTS: 0.010 MAX PART THICKNESS: 7.87 / 12.0 SYSTEM SCAN TABLE SIZE: 47.24 X 47.24 OPERATING TEMPERATURE: 50 TO 104 F LASER PROJECTOR DIMENSIONS: 40.3 X 8.7 X 7 LASER PROJECTOR WEIGHT: 36 LBS	🔒 Subscribe
2023	DAIKEN	ALPHA 10	2023 DAIKEN ALPHA 10 SLIDING TABLE SAW 7.5 HP 220 VOLT THREE PHASE MAIN MOTOR 3/4 HP SCORING MOTOR 3000 / 4000 / 5000 RPM MAIN BLADE (3 SPEEDS DEPENDING ON BLADE SIZE) 8000 RPM SCORING BLADE 130MM CUT (90) 90MM CUT (45) 1250MM MAX RIP CAPACITY HEAVY DUTY 3200MM X 418MM ALUMINUM SLIDING TABLE FLOOR SPACE 145 WIDE X 140 LONG X 34.5 TABLE HEIGHT SHOP SPACE REQUIRED TO OPERATE SAW 264 X 228 X 58 SHIPPING DIMENSIONS (SAW 90.5 X 47 X 36) (TABLE 142 X 20 X 11) 1914 POUNDS SHIPPING WEIGHT (1672 POUNDS NET WEIGHT)	🔒 Subscribe
	MITUOYO	B706	MITUOYO B706 CMM	🔒 Subscribe
	OKK	MCH8001	OKK MCH8001 HORIZONTAL MILLING MACHINE X-AXIS TRAVEL: ~1,300 MM (51.2 IN) Y-AXIS TRAVEL: ~1,200 MM (47.2 IN) Z-AXIS TRAVEL: ~1,200 MM (47.2 IN) TABLE SIZE: APPROX 800 800 MM (31.5 31.5 IN) TABLE LOAD CAPACITY: 6,600 LBS SPINDLE SPEED: 6,000 RPM SPINDLE MOTOR: 25 HP RAPID TRAVERSE: 944 IPM S/N:MA73628A	🔒 Subscribe
	OKUMA HOWA	2SP-V35	OKUMA HOWA 2SP-V35 VERTICAL TWIN SPINDLE LATHE, SUPPLY VOLTAGE: 480V 3-PHASE 60HZ, EQUIPPED WITH (2) 12-STATION TURRETS, SWING: 24 INCH, MACHINING CUTTING DIA.: 22 INCH, MACHINING LENGTH: 17 INCH, # OF AXIS: 4, X-AXIS: 10.4 INCH, Z-AXIS: 17.7 INCH, BAR CAPACITY: 4.33 INCH, POWER: 30HP, MAX RPM: 20- 2,500 RPM, TURNING DIA. 21.6 INCH, APPROXIMATE WEIGHT: 30,800 LBS, FANUC 18I-T CNC CONTROL	🔒 Subscribe
	ENSHU	JE-40	ENSHU JE-40 HORIZONTAL MACHINING CENTER X-AXIS: 15.7 INCH Y-AXIS: 19.7 INCH Z-AXIS: 15.7 INCH (2) 15.7 INCH SQUARE PALLETS MAX PALLET LOAD: 880 LBS 10,000 RPM SPINDLE SPEED SPINDLE TAPER #40 30 STATION TOOL CHANGER APPROXIMATE WEIGHT: 12,000 FANUC 18M CNC CONTROL	🔒 Subscribe
	OKK	PCV-60	OKK PCV-60 VERTICAL MACHINING CENTER	🔒 Subscribe
	NOMURA	B-100WP 4	NOMURA B-100WP 4 HORIZONTAL TABLE-TYPE BORING MILL - 20 HP, 96 48 TABLE, HEAVY-DUTY PRECISION MILLING MACHINE SPINDLE DIAMETER 4 (3.94 IN) SPINDLE TAPER #50 TAPER SPINDLE SPEED UP TO 1,200 RPM SPINDLE MOTOR POWER 20 HP TABLE SIZE (L W) 96 48 (DUAL SLIDES) TABLE CROSS TRAVEL (X) 98 TABLE LONGITUDINAL TRAVEL (Z) 48 VERTICAL HEAD TRAVEL (Y) 60 SPINDLE (BAR) TRAVEL ~2736 (DEPENDS ON CONFIGURATION) NEEDS NEW CONTROL* MACHINE WEIGHT ~13,500 LBS	🔒 Subscribe
	GARDNER DENVER		GARDNER DENVER AIR DRYER FOR A 25 HP SCREW AIR COMPRESSOR	🔒 Subscribe
			36" FORKLIFT FORKS	🔒 Subscribe
	YALE		1/2-TON YALE CRANE	🔒 Subscribe
			36 INCH ROTARY TABLE	🔒 Subscribe
	FERRO FIVE		FERRO FIVE FORKLIFT BATTERY CHARGER	🔒 Subscribe
	LUCAS	542B-60	LUCAS 542B-60 HORIZONTAL BORING MILL	🔒 Subscribe
2011	AMADA	FOM23015NT	2011 AMADA FOM23015NT CO2 LASER TYPE: CO2 LASER, FANUC / AF-SERIES RESONATOR (E.G. AF-4000I) LASER POWER: ~ 4000 W (4 KW) CUTTING AREA (X Y): APPROX. 3000 X 1500 MM (118 X 59 IN) Z-AXIS / FOCAL RANGE: ~200 MM TRAVEL FRAME / TABLE: SHUTTLE STYLE TABLE OPTIONS; CAPABLE OF SUPPORTING A SIGNIFICANT SHEET WEIGHT DEPENDING ON CONFIGURATION. WORKPIECE SIZE: SHEET SIZE UP TO ~ 510 (1524 X 3048 MM)	🔒 Subscribe
	ABICOR BINZEL	5	ABICOR BINZEL WELDING GUN #5	🔒 Subscribe
	WISCONSIN	SWN-75-5E3	350 WISCONSIN SWN-75-5E3 OVEN - 84 INCH X 60 INCH X 66 INCH INTERIOR 350 RECIRCULATING WALK-IN OVEN COMPLETE WITH HORIZONTAL AIR FLOW, TOP-MOUNT RECIRCULATING FAN, POWERED EXHAUSTER, AND DOUBLE SWING-OUT FRONT DOORS. HONEYWELL DIGITAL TEMP CONTROL ELECTRICAL 208V 3PH 60HZ	🔒 Subscribe
	GRIEVE		GRIEVE OVEN CAN GET UP TO 650 DEGREES	🔒 Subscribe
1992	KOMO	VR508	1992 KOMO VR508 CNC ROUTER TABLE SIZE: 96 X 60 X-AXIS: 111 Y-AXIS: 84 Z-AXIS: 11 FEED RATE (X,Y): 3150 IPM FEED RATE (Z): 600 IPM REPEATABILITY: +- 0.0004 ACCURACY: +- 0.0008 SPINDLE POWER: 12 HP SPINDLE SPEED: 6000-24000 RPM SPINDLE TAPER: ISO 30 ATC: 12 POSITION CAROUSEL MAX TOOL DIAMETER: 6.5 MAX TOOL WEIGHT: 12 LBS / 96 LBS MAX VACUUM PUMP(2): 10 HP ESTIMATED DIMENSIONS: 120 X 204 X 84 ESTIMATED WEIGHT: 8000 LBS EQUIPPED WITH: (2) 10 HP VACUUM PUMPS GE FANUC CONTROL	🔒 Subscribe
1990	MORI SEIKI	MV 65/50	1990 MORI SEIKI MV 65/50 VERTICAL MACHINING CENTER X AXIS: 50 Y AXIS: 25.6 Z AXIS: 25.6 TABLE SIZE: 66 26 SPINDLE MOTOR POWER: 25 HP MAXIMUM SPINDLE SPEED: 4,000 RPM SPINDLE TAPER: CAT 50 TOOL CHANGER CAPACITY: 30 TOOLS TOOL CHANGE TIME: 2/3 SECOND RAPID TRAVERSE (X & Y): 590 IPM RAPID TRAVERSE (Z): 472 IPM WEIGHT: 29,800 LBS MACHINE DIMENSIONS (L W H): 172 152 124	🔒 Subscribe

2008 OKUMA IMPACT LU-45

CNC MACHINE CENTERS

2008 OKUMA IMPACT LU-45 CNC LATHE, TURNING CENTER, 12 POSITION UPPER TURRET/ 10 POSITION LOWER TURRE...

Hammer Price: 🔒

2007 MORI SEIKI ZL-35B/750

CNC MACHINE CENTERS

2007 MORI SEIKI ZL-35B/750 4 AXIS CNC LATHE, TURNING CENTER, MAX TURNING DIAMETER: 16.5 MAX TURNING ...

Hammer Price: 🔒

2023 BIESSE AKRON 1330 A

WOODWORKING EQUIPMENT

2023 BIESSE AKRON 1330 A SINGLE SIDED EDGEBANDER. PANEL THICKNESS RANGE: 0.39 TO 2.36 INCH. EDGE BAN...

Hammer Price: 🔒

2023 BIESSE SELCO SK 4

WOODWORKING EQUIPMENT

2023 BIESSE SELCO SK 4 PANEL SAW, CNC-CONTROLLED AUTOMATIC PANEL BEAM SAW, MAX SAW BLADE PROJECTION:...

Hammer Price: 🔒

2023 BIESSE ROVER AS 15

CNC MACHINE CENTERS

2023 BIESSE ROVER AS 15 CNC POD & RAIL MACHINING CENTER, 17.4 HP SPINDLE POWER, UP TO 20,000 RPM SPI...

Hammer Price: 🔒

1968 WEIDEMATIC 1520

METALWORKING & FABRICATION EQUIPMENT

1968 WEIDEMATIC 1520 TURRET PUNCH...

Hammer Price: 🔒

1999 MURATA M-2044

METALWORKING & FABRICATION EQUIPMENT

1999 MURATA M-2044 TURRET PUNCH...

Hammer Price: 🔒

ABICOR BINZEL

WELDING & CUTTING

ABICOR BINZEL WELDING GUN #1...

Hammer Price: 🔒

ABICOR BINZEL 2

WELDING & CUTTING

ABICOR BINZEL WELDING GUN #2...

Hammer Price: 🔒

ABICOR BINZEL 3

WELDING & CUTTING

ABICOR BINZEL WELDING GUN #3...

Hammer Price: 🔒

TRUMPF TRUPULSE 2005 NANO (FK10-RM)

CIRCUIT BOARD, SMT & SEMICONDUCTOR MANUFACTURING EQUIPMENT

TRUMPF TRUPULSE 2005 NANO (FK10-RM) LASER PARAMETERS AVERAGE OUTPUT POWER: 50 W MAXIMUM PEAK PULSE P...

Hammer Price: 🔒

TRUMPF TRUPULSE 2005 NANO (FK10-RM)

CIRCUIT BOARD, SMT & SEMICONDUCTOR MANUFACTURING EQUIPMENT

TRUMPF TRUPULSE 2005 NANO (FK10-RM) LASER PARAMETERS AVERAGE OUTPUT POWER: 50 W MAXIMUM PEAK PULSE P...

Hammer Price: 🔒

2020 MULTICAM APEX3R

CNC MACHINE CENTERS

2020 MULTICAM APEX3R CNC ROUTER: 3 AXIS, 84" TABLE WIDTH, 144" TABLE LENGTH, VACUUM HOLD DOWN (4-ZON...

Hammer Price: 🔒

1996 DAEWOO ACE-V35

CNC MACHINE CENTERS

1996 DAEWOO ACE-V35 CNC MACHINING CENTER X=22 INCH Y=22 INCH Z=18 INCH...

Hammer Price: 🔒

KINGSTON HJ-1700

METALWORKING & FABRICATION EQUIPMENT

KINGSTON MODEL HJ-1700 CENTER ENGINE LATHE 10 INCH DIA X 60 INCH L...

Hammer Price: 🔒

LAGUN FTV-2S

METALWORKING & FABRICATION EQUIPMENT

LAGUN MODEL FTV-2S VERTICAL MILLING MACHINE (MANUAL) X=33 INCH Y=16 INCH Z=20 INCH...

Hammer Price: 🔒

MISC

FLOW BENCH - REFURBED...

Hammer Price: 🔒

TRUMPF TRUPULSE 2005 NANO (FK10-RM)

CIRCUIT BOARD, SMT & SEMICONDUCTOR MANUFACTURING EQUIPMENT

TRUMPF TRUPULSE 2005 NANO (FK10-RM) LASER PARAMETERS AVERAGE OUTPUT POWER: 50 W MAXIMUM PEAK PULSE P...

Hammer Price: 🔒

2022 LAGUNA TOOLS SMARTSHOP LD4

CNC MACHINE CENTERS

2022 LAGUNA TOOLS SMARTSHOP LD4 CNC ROUTER / LOCKDOWEL MACHINE - 1- 5MM BORING AND INSERTING UNIT WI...

Hammer Price: 🔒

2002 VERONA PF-CNC PLATINUM

WOODWORKING EQUIPMENT

2002 VERONA PF-CNC PLATINUM 5 AXIS CNC STONE BRIDGE SAW MAX DIAMETER OF SAW BLADE 17.5 INCH CUTTING ...

Hammer Price: 🔒

2005 DAVI YSTAD

METALWORKING & FABRICATION EQUIPMENT

2005 DAVI YSTAD 1/4 X 10 BIDIRECTIONAL CNC FOLDING SYSTEM - W/ AUTOLOAD UNLOAD BEND WIDTH: 10 BEND T...

Hammer Price: 🔒

VIRTEK

TEST, MEASUREMENT & QUALITY EQUIPMENT

VIRTEK INSPECTION MEASURING LASER SCANNER SCANNING ACCURACY (2D): 0.002 SCANNING ACCURACY HEIGHT MEA...

Hammer Price: 🔒

2023 DAIKEN ALPHA 10

WOODWORKING EQUIPMENT

2023 DAIKEN ALPHA 10 SLIDING TABLE SAW 7.5 HP 220 VOLT THREE PHASE MAIN MOTOR 3/4 HP SCORING MOTOR 3...

Hammer Price: 🔒

MITUOYO B706

TEST, MEASUREMENT & QUALITY EQUIPMENT

MITUOYO B706 CMM...

Hammer Price: 🔒

OKK MCH8001

METALWORKING & FABRICATION EQUIPMENT

OKK MCH8001 HORIZONTAL MILLING MACHINE X-AXIS TRAVEL: ~1,300 MM (51.2 IN) Y-AXIS TRAVEL: ~1,200 MM (...

Hammer Price: 🔒

OKUMA HOWA 2SP-V35

METALWORKING & FABRICATION EQUIPMENT

OKUMA HOWA 2SP-V35 VERTICAL TWIN SPINDLE LATHE, SUPPLY VOLTAGE: 480V 3-PHASE 60HZ, EQUIPPED WITH (2)...

Hammer Price: 🔒

ENSHU JE-40

CNC MACHINE CENTERS

ENSHU JE-40 HORIZONTAL MACHINING CENTER X-AXIS: 15.7 INCH Y-AXIS: 19.7 INCH Z-AXIS: 15.7 INCH (2) 15...

Hammer Price: 🔒

OKK PCV-60

CNC MACHINE CENTERS

OKK PCV-60 VERTICAL MACHINING CENTER...

Hammer Price: 🔒

NOMURA B-100WP 4

METALWORKING & FABRICATION EQUIPMENT

NOMURA B-100WP 4 HORIZONTAL TABLE-TYPE BORING MILL - 20 HP, 96 48 TABLE, HEAVY-DUTY PRECISION MILLIN...

Hammer Price: 🔒

GARDNER DENVER

AIR COMPRESSORS

GARDNER DENVER AIR DRYER FOR A 25 HP SCREW AIR COMPRESSOR...

Hammer Price: 🔒

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

36" FORKLIFT FORKS...

Hammer Price: 🔒

YALE

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

1/2-TON YALE CRANE...

Hammer Price: 🔒

METALWORKING & FABRICATION EQUIPMENT

36 INCH ROTARY TABLE...

Hammer Price: 🔒

FERRO FIVE

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

FERRO FIVE FORKLIFT BATTERY CHARGER...

Hammer Price: 🔒

LUCAS 542B-60

METALWORKING & FABRICATION EQUIPMENT

LUCAS 542B-60 HORIZONTAL BORING MILL...

Hammer Price: 🔒

2011 AMADA FOM23015NT

METALWORKING & FABRICATION EQUIPMENT

2011 AMADA FOM23015NT CO2 LASER TYPE: CO2 LASER, FANUC / AF-SERIES RESONATOR (E.G. AF-4000I) LASER P...

Hammer Price: 🔒

ABICOR BINZEL 5

WELDING & CUTTING

ABICOR BINZEL WELDING GUN #5...

Hammer Price: 🔒

WISCONSIN SWN-75-5E3

INDUSTRIAL AND COOLING HEATING EQUIPMENT

350 WISCONSIN SWN-75-5E3 OVEN - 84 INCH X 60 INCH X 66 INCH INTERIOR 350 RECIRCULATING WALK-IN OVEN ...

Hammer Price: 🔒

GRIEVE

INDUSTRIAL AND COOLING HEATING EQUIPMENT

GRIEVE OVEN CAN GET UP TO 650 DEGREES...

Hammer Price: 🔒

1992 KOMO VR508

CNC MACHINE CENTERS

1992 KOMO VR508 CNC ROUTER TABLE SIZE: 96 X 60 X-AXIS: 111 Y-AXIS: 84 Z-AXIS: 11 FEED RATE (X,Y): 31...

Hammer Price: 🔒

1990 MORI SEIKI MV 65/50

CNC MACHINE CENTERS

1990 MORI SEIKI MV 65/50 VERTICAL MACHINING CENTER X AXIS: 50 Y AXIS: 25.6 Z AXIS: 25.6 TABLE SIZE: ...

Hammer Price: 🔒

<< Previous 1 2 3

Disclaimer: BidSeek aggregates publicly available auction and liquidation results from independent third-party sources for research and valuation reference only. BidSeek is not affiliated with, endorsed by, sponsored by, or operated in connection with any auction house, marketplace, or liquidation firm. All data and images are provided as-is for informational purposes and remain the property of their respective owners.

Recent Searches

Login

Reset Password

CNC and Fabrication Machinery Surplus in Multiple Locations

Save to Project Folder

Print Options

Save to Project Folder