NutraPharma Packaging Equipment Multiple Locations

2023 MUNSON MX-3-SS MIXER 3 CUBIC FEET CAPACITY: 3 CUBIC FEET VOLTS 460 PHASE: 3 CYCLE: 60 S/N: 221100

APPS R-16K TABLET COUNTER 16 LANE VOLTAGE: 120 AMPS: 15 FREQUENCY: 60 HZ AIR: 80 PSI @ 1 CFM FEATURES: DUAL EIGHT-LANE COUNTING SYSTEMS LARGE 3600 CUBIC-INCH CAPACITY HOPPER AUTOMATIC FEED CONTROL STAINLESS STEEL CONSTRUCTION

2013 JVM CO. LTD JV- 208DO AUTOMATIC TABLET DISPENSING & PACKAGING SYSTEM MDL: JV- 208DO AUTOMATIC TABLET DISPENSING & PACKAGING SYSTEM WILL PROCESS THE MACHINE FILE AND SORT BY AM/PM DESIGNATION, BUT ALSO INTUITIVELY SORT THE SUPPLEMENTS INTO POUCHES/PACKS BASED ON THE SIZING AND QUANTITY OF EACH INCLUDED SUPPLEMENT. JVM PARATA PASS 208 - ATDPS DOOR TYPE MDL: JV- 208DO S/N: DOY8B7 VOLTS: 120, HERTZ: 60, 230 W MAX 550W JVM CO. LTD MADE IN KOREA

2014 JVM CO. LTD JV-208DO AUTOMATIC TABLET DISPENSING & PACKAGING SYSTEM MDL: JV- 208DO - 1- AUTOMATIC TABLET DISPENSING & PACKAGING SYSTEM MDL: JV- 208DO AUTOMATIC TABLET DISPENSING & PACKAGING SYSTEM WILL PROCESS THE MACHINE FILE AND SORT BY AM/PM DESIGNATION, BUT ALSO INTUITIVELY SORT THE SUPPLEMENTS INTO POUCHES/PACKS BASED ON THE SIZING AND QUANTITY OF EACH INCLUDED SUPPLEMENT. DOOR TYPE MDL: JV- 208DO S/N: DOX7H1 VOLTS: 120, HERTZ: 60, 230 W MAX 550W MADE IN KOREA

PANASONIC MCO-170M INCUBATOR EXTERNAL DIMENSIONS (W X D X H) 620 X 730 X 905 MM INTERNAL DIMENSIONS (W X D X H) 490 X 523 X 665 MM VOLUME: 161 LITERS TEMPERATURE CONTROL RANGE & FLUCTUATION AT +5 ~ +50, 0.1 C TEMPERATURE UNIFORMITY: 0.25 C CO2 CONTROL RANGE & FLUCTUATION: 0 ~ 20, 0.15 % O2 CONTROL RANGE & FLUCTUATION: 1 -18 AND 22 - 80, 0.2 % HUMIDITY LEVEL & FLUCTUATION: 95, 5 %RH STERILIZATION METHOD: H2O2 DECONTAMINATION TEMPERATURE SENSOR: THERMISTOR CO2 SENSOR: DUAL IR O2 SENSOR: STABILIZED ZIRCONIA SENSOR DISPLAY TOUCH PANEL (WVGA FULL COLOR LCD) AND USB DATA LOGGING DESCRIPTION: THE INCUSAFE MCO-170M MULTIGAS INCUBATOR OFFERS THE MOST PRECISE REGULATION OF OXYGEN AND OTHER GASES, WHILE MAINTAINING SUPERIOR TEMPERATURE UNIFORMITY, CONTAMINATION CONTROL, AND USABILITY. CULTURING CELLS AT PHYSIOLOGICAL OXYGEN LEVELS ALLOWS THEM TO GROW FASTER, LIVE LONGER, AND EXPERIENCE FEWER MUTATIONS. THE INCUSAFE MCO-170M MULTIGAS INCUBATOR HELPS TO ACHIEVE MORE ACCURATE RESULTS WHEN CULTURING CELLS AT PHYSIOLOGICAL OXYGEN LEVELS AND IS THEREFORE IDEALLY SUITED FOR MAMMALIAN TISSUE RESEARCH APPLICATIONS, CELLULAR THERAPY, STEM CELL RESEARCH, PATHOPHYSIOLOGICAL STUDIES AND PHARMACEUTICAL PRODUCTION PROCESSES. IDEALLY SUITED FOR: STEM CELL RESEARCH & DIFFERENTIATION IN VITRO FERTILIZATION REGENERATIVE MEDICINE PRIMARY CELL CULTURING CANCER RESEARCH EMBRYO STUDIES S/N: 16040067

INGERSOLL RAND UP6-15CTAS-125W/D AIR COMPRESSOR VOLTS: 230 HERTZ: 60 MAXIMUM PRESSURE: 125 PHASE: 3 TANK CAPACITY: 80 PUMP SPEED: 6250 S/N: CBV283070

PATTERSON KELLEY 210850 10 CU FT V- BLENDER. CURRENTLY DISASSEMBLED. MAX DENSITY: 70 #/ CU. FT. WORKING CAP: 10 CU. FT.

DEVELOP MC BS-130 HORIZONTAL PACKAGING MACHINE WITH AUGER FILLER - 1 USED DEVELOP MC HORIZONTAL PACKAGING MACHINE WITH AUGER FILLER *MISSING HOPPER* MEASURING RANGE: 0-250ML MEASURING METHOD: AUGER FILLER BAG SIZE LENGTH: 60-300MM/WIDTH: 50-250MM CAPACITY(MAX): 70 BAGS/MIN CONTROL STYLE: PLC+ ENGLISH TOUCH SCREEN POWER: 4KW POWER SUPPLY: AC 380V 50HZ AIR PRESSURE: 0.6MPA WEIGHT N.W.: 600KG DIMENSIONS(MM): 2850(L)A 920(W)A 1460(H) BAG SHAPE: THREE OR FOUR SIDE SEALING PACKAGING MACHINE: MDL: BS-130 VOLTS: 220 PHASE: 3 HZ: 60 POWER: 3.5KW MAX CURRENT: 22 AMPS S/N: SDM1902-03 AIR PRESSURE: 0.4-0.6 MPA AUGER FILLER: MDL: FG-3A-100 VOLTS: 220 PHASE: 3 HZ: 60 POWER: 0.93 KW MAX CURRENT: 6 AMPS S/N: SDM1902-01 TOTAL DIMENSIONS: 114" LENGTH 39" WIDTH 95" HEIGHT

WATERS 2695 HPLC SEPARATIONS MODULE SERIAL NUMBER: H04SMC385R DESCRIPTION: THE WATERS ALLIANCE 2695 HPLC SEPARATIONS MODULE CAN BE USED FOR IN-VITRO DIAGNOSTIC TESTING TO ANALYZE MANY COMPOUNDS, INCLUDING DIAGNOSTIC INDICATORS AND THERAPEUTICALLY MONITORED COMPOUNDS. THE SEPARATIONS MODULE IS AN INTEGRATED SOLVENT AND SAMPLE MANAGEMENT PLATFORM. WATERS 2487 DUAL ABSORBANCE DETECTOR VA 145 VOLTS: 100 240 FREQUENCY: 60 HZ SERIAL NUMBER: K02487492M PART NUMBER: WAT081110 DESCRIPTION: THE WATERS 2487 DETECTOR FEATURES ADVANCED PROGRAMMABILITY, DUAL WAVELENGTH CAPABILITY, UNMATCHED SIGNAL-TO-NOISE PERFORMANCE, REDUCED OPTICAL BANDWIDTH AND EXCEPTIONAL LINEARITY TO PROVIDE THE HIGHEST PERFORMANCE IN UV/VIS DETECTION FOR YOUR HPLC ANALYSES.

ROTARY TABLET PRESS, 33 STATION, KEYED HEAD MODEL: RTP33 PELLETS OR TABLETS PER HOUR: 118,000 RTP SPECIFICATION TOOLING MAX PRESSURE: 40KN HOPPER: DUAL POWDER HOPPER STATIONS: 33 STATION PHASE: 3 POWER: 2.2KW GENERAL INFO: THE RTP33 IS AN EXCEPTIONALLY POWERFUL CONTINUOUS AUTOMATIC ROTARY PELLET PRESS DESIGNED FOR PHARMACEUTICAL, CHEMICAL, OR FOOD TECHNOLOGY MANUFACTURERS WHO NEED TO PRODUCE PELLETS IN INDUSTRIAL QUANTITIES. THE 2.2KW, THREE-PHASE MOTOR OF THIS PELLET PRESS DRIVES 33 SETS OF DIES, PRESSING GRANULAR OR DRY POWDERED RAW MATERIALS INTO ROUND PELLETS OF UP TO 12MM IN DIAMETER. WITH A MAXIMUM PELLET PRODUCING CAPACITY OF UP TO 118,000 UNITS PER HOUR, THE RTP33 CAN BE RELIED ON TO SATISFY LARGE SCALE COMMERCIAL DEMAND FOR HIGH-QUALITY PELLETS OF A STANDARDIZED WEIGHT.

MANESTY ROTAPRESS MK IV 55 STATION ROTARY TABLET PRESS RUNS A WIDE VARIETY OF PRODUCTS AT HIGH SPEED. FEATURES: DOUBLE-SIDED COMPACTION WITH PRE-COMPRESSION, 55 STATION, B-TOOL TURRET, KEYED UPPER PUNCH BORES, CAPABLE OF PRODUCING UP TO 600,000 TABLETS PER HOUR. POWER REQUIREMENTS: 460VAC/60HZ/3P/32A. COMPRESSED AIR 80-100 PSI. OTHER FEATURES AND SPECS: GUARD DOORS WITH SAFETY INTERLOCKS QUICK CHANGE ROTARY FEEDERS TABLET WEIGHT CONTROL SYSTEM (ADDITIONAL FEE) STAINLESS STEEL HOPPER W BUTTERFLY VALVE PRESSURE ROLLS WITH SEALED BEARINGS TIGHT PUNCH DETECTOR BILAYER CAPABILITY (ADDITIONAL FEE) GMP PAINT-FREE TABLETING ZONE REMOVABLE WEIGHT CONTROL STATION DUST EXTRACTION SYSTEM 2 ZONE HYDROPNEUMATIC OVERLOAD MECHANISM MAX DEPTH OF FILL: 17.40MM MAX TABLET DIA: 16.00MM DIE TYPE: B UPPER PUNCH ENTRY: 1.5-8MM MAIN MOTOR: 7.5KW MAIN COMPACTION FORCE: 6.5 TONS UP TO 10 MAX FLOOR SPACE (MM): 1670 WIDE X 1910 TALL X 1625 LONG. WEIGHT: 3745KG/ 8256LB. S/N: 16133NI

2005 JCMCO JC-DSH-39 39 STATION TABLET PRESS S/N: DSH05060 39 STATIONS MAX TABLET DIA.: 19MM (CAPLET) (3/4") PRODUCTION CAPACITY ( TABLETS / HOUR): 65000-260000 REVOLUTION OF TURRET / MIN (60 CYC): 14-56 RPM DEPTH OF FILL ADJUSTABLE TO: 19MM (3/4") MAXIMUM OPERATING PRESSURE: 10,000KGS (22,000 LB) MAXIMUM PRE-PRESSURE: 3,000KGS (6,600 LB) DIAMETER OF DIE: 30.16MM (1.1875") HEIGHT OF DIE: 23.81MM (0.9375") NOMINAL DIAMETER OF PUNCH BODY: 25.4MM (1") OVERALL LENGTH OF UPPER PUNCH: IPT 133.35MM (5.25") OR EU 133.6MM OVERALL LENGTH OF LOWER PUNCH: IPT 133.35MM (5.25") OR EU 133.6MM TURRET P.C.D: 490MM POWER CONSUMPTION: 5HP (3.7KW) MACHINE DIMENSIONS: 900X1100X1750MM (H) (NOT INCLUDING HOPPER) NET WEIGHT: 2600 KGS (5720 LBS) FOR LARGE BATCH PRODUCTION, ALLOW FOR SINGLE LAYER TABLETTING WITH DOUBLE-SIDED OUTPUT, ACCURATE TABLETTING, TABLETTING COMPARTMENT SEPARATED FROM THE DRIVE MECHANISM, MECHANICAL COMPRESSION SYSTEM, EASY MAINTENANCE & CLEANING, MEETS GMP. STANDARD FEATURES: SLOTTED TURRET HEAD, ELECTRIC TACHOMETER, R.P.M. INDICATOR, DUST EXTRACTION CONNECTION, CHROMIUM COATING DEVICE FOR DIE TABLE, PAINT-FREE TABLETTING ZONE, OUTSIDE ALLOVER COVERED WITH SUS#304

DONALDSON TORIT DFT 3-12 DUST COLLECTOR S/N: IG412611-002 FEATURES NON RETURN VALUES MODEL: 12" EM-NRV SERIAL: 0590002 MANUFACTURER: ECO MAXX FEATURES HIGH SPEED ABORT GATE MODEL: 26" EM-HSAG SERIAL: 0068 MANUFACTURER: ECO MAXX

70 CUBIC FOOT V- BLENDER **CURRENTLY DISASSEMBLED** MODEL: V - MIXER S/N: VM-99059 FULL POWER: CAPACITY: 2000 LITERS VOLTS: 440 HERTZ: 60 POWER: 5.5KW RPM: 14

WATERS 2695 SEPARATIONS MODULE. THE WATERS ALLIANCE 2695 HPLC SEPARATIONS MODULE CAN BE USED FOR IN-VITRO DIAGNOSTIC TESTING TO ANALYZE MANY COMPOUNDS, INCLUDING DIAGNOSTIC INDICATORS AND THERAPEUTICALLY MONITORED COMPOUNDS. THE SEPARATIONS MODULE IS AN INTEGRATED SOLVENT AND SAMPLE MANAGEMENT PLATFORM. S/N: E06SM4 461A WATERS LAC/E 32 ACQUISITION SERVER

WATERS 2695 SEPARATION MODULE - 1- WATERS 2695 SEPARATION MODULE (WATER HPLC) DESCRIPTION: THE WATERS ALLIANCE 2695 HPLC SEPARATIONS MODULE CAN BE USED FOR IN-VITRO DIAGNOSTIC TESTING TO ANALYZE MANY COMPOUNDS, INCLUDING DIAGNOSTIC INDICATORS AND THERAPEUTICALLY MONITORED COMPOUNDS. THE SEPARATIONS MODULE IS AN INTEGRATED SOLVENT AND SAMPLE MANAGEMENT PLATFORM. WATERS 2489 UV/ VISIBLE DETECTOR DESCRIPTION: THE 2489 UV/VIS DETECTOR IS THE MOST SENSITIVE AND VERSATILE DUAL-WAVELENGTH ABSORBANCE DETECTOR AVAILABLE FOR HPLC AND UHPLC. IT IS DESIGNED TO COMBINE A HIGH ENERGY DEUTERIUM SOURCE, A PRECISE OPTICAL DESIGN, AND LOW NOISE, HIGH SPEED ELECTRONICS ALL IN ONE DETECTOR. WATERS 2487 DUAL ABSORBANCE DETECTOR DESCRIPTION: THE WATERS 2487 DETECTOR FEATURES ADVANCED PROGRAMMABILITY, DUAL WAVELENGTH CAPABILITY, UNMATCHED SIGNAL-TO-NOISE PERFORMANCE, REDUCED OPTICAL BANDWIDTH AND EXCEPTIONAL LINEARITY TO PROVIDE THE HIGHEST PERFORMANCE IN UV/VIS DETECTION FOR YOUR HPLC ANALYSES. WATERS 2996 PHOTODIODE ARRAY DETECTOR DESCRIPTION: THE WATERS 2996 HPLC PHOTO DIODE ARRAY DETECTOR DELIVERS EXCEPTIONAL CHROMATOGRAPHIC AND SPECTRAL SENSITIVITY ALONGSIDE RELIABIITY. ANALYITICAL AND PREPARATIVE SEPERATIONS HAVE NEVER BEEN EASIER WITH THIS ADVANCED SPECTRAL ANALYSIS TOOL, FEATURING ENHANCED HOMOGENUITY ASSESSMENT AND COMPONENT RECOGNITION. THE WATERS 2996 OFFERS UNPRECEDENTED DETECTION AND QUANTIFICATION OF TRACE IMPURITIES. THE UNIT FEATURES START-UP DIAGNOSTICS TO ENSURE SUPERIOR PERFORMANCE PRIOR TO USE. MAXIUM CHROMAATOGRAPHIC SENSITIVITY MEANS UNPRECEDENTED TRACE IMPURITY DETECTION AND QUANTIFICATION, WHILE OPTIMIZED SPECTRAL SESNITIVITY AND PURITY ALGORITHMS ALLOW DEFINITIVE

2013 SCHENCK 110023361-10A ACCURATE FEEDER S/N: PFPPB6-001 TYPE: MID MLCH SCREW DIAMETER: 1.5 HP: 0.5 HP, VOLTS: 230-460 RPM: 1725 DIMENSIONS: 62L X 32W X 50H GENERAL INFO: THE ACCURATE SERIES VOLUMETRIC FEEDING SYSTEMS ARE AVAILABLE FOR EVERY FEEDING APPLICATION. THEIR MOST OUTSTANDING PROPERTIES ARE THEIR ECONOMY AND FLEXIBILITY, AS WELL AS THEIR EASE OF INTEGRATION INTO EXISTING PRODUCTION LINES. WITH FEED RATES RANGING FROM APPROXIMATELY 0.000017 TO 280FT3/H (0.1/H TO 8,000I/H), THE FEEDING SYSTEM CAN BE USED FOR CONTINUOUS FEEDING, CHARGING, AND BATCHING. IT CAN PROCESS BULK SOLIDS WITH A PARTICLE SIZE OF UP TO 10 MM. MODEL 10 THE ACCURATE MODEL 10 IS EASILY DISASSEMBLED FOR CLEANING OR FOR APPLICATIONS THAT REQUIRE SEPARATE HOPPERS FOR DIFFERENT MATERIALS. THE TUF-FLEXTM HOPPER IN THE MODEL 10 CAN BE CHANGED IN LESS THAN TWO MINUTES WITHOUT TOOLS. FURTHER ADVANTAGES THE ACCURATE SERIES VOLUMETRIC FEEDERS COME EQUIPPED WITH EASY TO REMOVE OUTSIDE PANELS, STAINLESS STEEL CONSTRUCTION, LIFETIME LUBRICATED BEARINGS, DOUBLE SHAFT SEALS TO PREVENT POWDER LEAKAGE, GASKETED COVERS, AND VINYL HOPPERS THAT ARE AGITATED ON THE EXTERIOR FOR GENTLE PRODUCT DISCHARGE. A LARGE INLET PREVENTS BRIDGING AND THE ROUNDED CORNERS ON THE VINYL HOPPER HELP PROVIDE AN UNINTERRUPTED FLOW. 1 USED READING BAKING SOLUTIONS CLAM SHELL CONTINUOUS MIXER MDL: 0X001-000-2013-7099 S/N: J115043-040 DIMENSIONS: 6.5 OPENING AT THE TOP, 77L OF SHELL, 18 DIAMETER, LENGTH OF BLADES: 6.5 RECTANGULAR OUTLET: 13.25 X 9.5 VAC: 480 HZ: 60 AMPS: 50 PHASE: 3 OVERALL DIMENSIONS: 120 L X 52 H GENERAL INFO: THESE CONTINUOUS PROCESSORS FEATURE AN OPTIONAL CLAMSHELL BARREL DESIGN THAT OPENS QUICKLY AND EASILY TO ACCESS THE PADDLES AND SCREWS FOR CLEANING, INSPECTION, AND/OR ADJUSTMENTS TO THE CONFIGURATION. OPENING AUTOMATICALLY AT THE PUSH OF A BUTTON, THE PROPRIETARY CLAMSHELL BARREL DESIGN USES HYDRAULIC POWER TO RAISE THE BARREL AND EXPOSE THE INTERIOR, WHILE ALSO LOCKING THE BARREL SAFELY IN PLACE. THE DESIGN ELIMINATES THE CRANES, HOISTS, AND OTHER EQUIPMENT NEEDED TO ACCESS THE SCREWS AND PADDLES USING TRADITIONAL BARREL DESIGNS ALONG WITH THEIR NEED FOR EXTRA FLOOR SPACE AS TEMPORARY BARREL STORAGE DURING CLEANING AND MAINTENANCE. DEVELOPED FOR FOOD, PLASTICS, CHEMICAL, PHARMACEUTICAL, AND OTHER PROCESSORS, THE CLAMSHELL DESIGN SPEEDS THE CHANGEOVER PROCESS AND PROMOTES COMPLETE CLEANING TO VIRTUALLY ELIMINATE THE POTENTIAL FOR CROSS-CONTAMINATION. THE CLAMSHELL DESIGN IS SUITABLE FOR AUTOMATICALLY MIXING, COMPOUNDING, REACTING, CRYSTALLIZING, ENCAPSULATING, PRECONDITIONING, AND OTHER PROCESSES THAT REQUIRE MULTIPLE POWDERED, LIQUID, AND VISCOUS MATERIALS TO BE COMBINED INTO A UNIFORM, HOMOGENEOUS PRODUCT. THE CLAMSHELL DESIGN IS CUSTOM-ENGINEERED WITH THE CONTINUOUS PROCESSOR FOR EACH INSTALLATION TO ACCOMMODATE NEARLY ANY MATERIAL INCLUDING ABRASIVES, CORROSIVES, AND MATERIALS REQUIRING FDA, USDA, AND/OR 3A COMPLIANCE. THIS CLAM SHELL MIXER WAS USED IN THE PROCESS OF CREATING PROTEIN CHIPS 1 USED READING BAKING SYSTEMS ROTARY PRESSER/SHEETER MDL: SH202-048-2013-7102 S/N: J115043-070 MFG: READING BAKING SYSTEMS VAC: 480 PHASE: 3 HZ: 60 AMPS: 10 DIMENSIONS: 132L X 110W X 102H GENERAL INFO: THE THOMAS L. GREEN 2-ROLL SHEETER CREATES A CONSISTENT DOUGH SHEET READY FOR DOUGH FORMING OR FURTHER REDUCTION. TWO POWERED STAINLESS STEEL ROLLS ROTATE TOWARD ONE ANOTHER AND DRAW RAW DOUGH INTO A SINGLE SHEET WITH CONSISTENT CHARACTERISTICS AND THICKNESS. THE STAINLESS STEEL ROLLS ARE MANUFACTURED TO PRECISE TOLERANCES OF CONCENTRICITY IN ORDER TO MAINTAIN CONSISTENT DOUGH SHEET FORMATION. FEATURES: ROLL GAP DISTANCE CAN BE MEASURED AND MONITORED DURING PRODUCTION SEPARATE DIRECT DRIVES FOR INDEPENDENT ROLL CONTROL SHEET THICKNESS CAN BE ADJUSTED DURING PRODUCTION EASY ACCESS FOR MAINTENANCE AND INSPECTION HOPPER LEVEL SENSING FOR AN ACCURATE HOPPER FILL. 1 USED READING BAKING SYSTEMS ROTARY CUTTER WITH EXTRA DIES MFG: READING BAKING SYSTEMS OVERALL DIMENSIONS: 172L X 70W X 78 HEIGHT CONVEYOR HEIGHT: 46H GENERAL INFO: THE ROTARY CUTTING STATION ACCURATELY AND CONTINUOUSLY CUTS DISTINCT PRODUCT SHAPES OUT OF A SINGLE DOUGH SHEET. AN INTEGRATED CONVEYOR SYSTEM MOVES THE PRODUCT THROUGH - AND IS PRESSURED AGAINST - A ROTATING DIE ASSEMBLY. OPERATORS CAN ADJUST THE PRESSURE ON THE DOUGH SHEET DURING OPERATION TO ENSURE A THOROUGH CUT AND CONSISTENT PIECE PRODUCTION. FEATURES: MAY BE DESIGNED WITH TWO OR MORE DIE ROLLS FOR COMPLEX SHAPE PRODUCTION OR USED INDEPENDENTLY FOR DIFFERENT PRODUCTS ON THE SAME LINE. AN INTEGRATED SCRAP REMOVAL SYSTEM MAY BE MOUNTED ON THE DISCHARGE END OF THE MACHINE. SCRAP DOUGH CAN BE DISCHARGED AND RE-ROUTED TO THE DOUGH HANDLING SYSTEM FOR REUSE. THE GAP BETWEEN THE CONVEYOR AND DIE ROLL AND THE PRESSURE EXERTED ON THE CONVEYOR BELT IS ADJUSTABLE. DOUGH SHEET THICKNESS IS TYPICALLY BETWEEN .89MM (.035) AND 1.65MM (.065) PRIOR TO CUTTING, BUT THICKER SHEETS MAY BE ACCOMMODATED. DIE ROLLS CAN BE ENGRAVED BRONZE, COATED METALS, OR

STAINLESS STEEL CONE BLENDER 500L - 1 USED STAINLESS STEEL CONE BLENDER MODEL SZH, BATCH VOLUME: 500L MIXING TIME: 8-15 MINUTES MOTOR: 3KW BARREL SPEED: 15RPM

SZH CONE BLENDER 2000L BATCH SIZE: 2000L MIXING TIME: 8-15 MINUTES BARREL SPEED: 24 RPM MOTOR: 8KW DIMENSIONS 10' L X 5' W X 10' H 15'' OUTLET

VWR SCIENTIFIC AQUA SONIC WATER BATH 750T ULTRASONIC BATHS CREATE ULTRASONIC WAVES IN THE TANKED WATER TO AGGRESSIVELY CLEAN GLASSWARE AND INSTRUMENTS FROM GRIME. ULTRASONIC CLEANING USING HIGH FREQUENCY SOUND WAVES IS HIGHLY EFFECTIVE AND EFFICIENT. THE STEEL CHAMBER IS RESISTANT TO CAVITATION BUBBLES AND STRONG SOLVENTS WHEN ENHANCED CLEANING IS REQUIRED. CAPABLE OF ADJUSTING THE POWER EXERTED, THE COMPACT ULTRASONIC BATHS PROTECT FRAGILE EQUIPMENT COMMON IN ANALYTICAL OR MEDICAL LABORATORIES. FULL CLEANSING CYCLES TAKE ONLY MINUTES TO COMPLETE AND WILL AUTOMATICALLY SHUT OFF WHEN TIMED SETTING IS REACHED. VOLTS: 117 FREQUENCY: 60 S/N: 21811-832

2020 AUTOMATIC POUCHING MACHINE - 1 USED AUTOMATIC FILLING AND POUCHING MACHINE 1-100 G PARTICLE SUBPACKAGE FILLER DIMENSIONS: 23" X 18" X 61"H VOLTS: 110 HZ: 60 GROSS WEIGHT: 66 KG/146 LBS PACKING RANGE: 1-100G/ 0.035 -3.53 OZ GENERAL INFO: AUTOMATIC WEIGHING & SEALING - THE AUTOMATIC POWDER FILLING MACHINE IS COMBINED WITH A WEIGHING MACHINE AND SEALING MACHINE. THE WEIGHING, BLANKING, PACKAGING, AND CUTTING PROCESSES ARE CONTROLLED BY MICRO-COMPUTER. IT IS EQUIPPED WITH TWO VIBRATION SYSTEMS, SO THE PACKAGING WILL BE SMOOTH. THREE SIDE SEALED & 100G - THE FILLING SEALING MACHINE FEATURES A 3-SIDE SEAL DESIGN, SEALING THE PRODUCT FROM LEFT AND RIGHT. PACKING SPEED: 10-15 BAGS/MIN(DEPENDING ON THE ITEMS AND PRODUCT QUALITY). PAPER WIDTH: 7 INCH/18 CM(MEANS THE FINISHED PRODUCT BAG WIDTH 3.2 INCH/8 CM). PAPER LENGTH: 0.4-6.3 INCH/1-16 CM. PACKING RANGE: 1-100G/ 0.035 -3.53 OZ. MICROCOMPUTER CONTROL - THE AUTOMATIC WEIGHING FILLING PACKING MACHINE USES MICROCOMPUTER CONTROL, THE CALCULATION IS MORE ACCURATE AND FASTER. IT MAKES THE WEIGHING AND FILLING PROCESS SCIENTIFIC AND LESS ERROR. DOUBLE DIGITAL CONTROL SCREENS ARE EASY TO UNDERSTAND, SAVING YOUR TIME. STAINLESS STEEL CONSTRUCTION - THE NUTS PACKAGING MACHINE IS MADE OF FOOD-GRADE STAINLESS STEEL, SAFE FOR FOOD PROCESSING, RESISTANT TO CORROSION, RUST, ACID, AND ALKALI. 4 CASTERS ARE CONVENIENT FOR THE MOVE. EASY TO OPERATE AND MAINTAIN FOR BETTER OPERATION OF THE MACHINE. WIDE APPLICATION - THIS PARTICLE FILLER SEALING MACHINE IS SUITABLE FOR FILTER PAPER, COMPOSITE FILM, ALUMINUM FOIL BAGS, NON-WOVEN FABRICS, OIL PAPER, HEAT-SEALED PLASTIC BAGS, AND OTHER HEAT-SEALING PACKAGING MATERIALS. CAPABILITIES: FULL AUTOMATIC: WEIGHING, BLANKING, PACKAGING, AND CUTTING, FINISHED AT ONE TIME. THE WEIGHING PACKING MACHINE FEATURES DOUBLE VIBRATION SYSTEMS, RUNNING SMOOTHLY WITH LOW NOISE. A LARGE HOPPER ALLOWS FOR EFFICIENT FILLING. IT IS A 3-SIDE SEAL TYPE. PAPER WIDTH: 18 CM(MEANS THE FINISHED PRODUCT BAG WIDTH 8 CM). PAPER LENGTH: 1-16 CM. PACKAGING RANGE: 1-100G CAPACITY. A HIGH-ACCURACY MICROCOMPUTER CONTROL SYSTEM MAKES THE WEIGHING AND FILLING PROCESS SCIENTIFIC AND LESS ERROR. DOUBLE CONTROL SCREENS ARE EASY TO OPERATE. SYSTEM OVERVIEW: POWDER PACKING MACHINE 1-100 G THE POWDER BAG THREE-SIDE SEAL FILLING MACHINE IS STABLE AND RELIABLE, COMBINED WITH WEIGHING AND PACKAGING FUNCTIONS TOGETHER, FINISHED AT ONE TIME. IT ADOPTS DOUBLE VIBRATION SYSTEMS FOR HIGHLY EFFICIENT BLANKING. IT IS PERFECT FOR POWDER, PARTICLE, AND OTHER DRY AND MOBILE MATERIALS, SUITABLE FOR FILTER PAPER, COMPOSITE FILM, ALUMINUM FOIL BAGS, NON-WOVEN FABRICS, OIL PAPER, HEAT-SEALED PLASTIC BAGS, AND OTHER HEAT-SEALING PACKAGING MATERIALS.

NORDEN 700 AUTOMATIC TUBE FILLING MACHINE VOLTAGE: 208 AMPERAGE: 20 PHASE: 3 FREQUENCY: 60HZ DESCRIPTION: NORDENMATIC HOT AIR AUTOMATIC TUBE FILLER AND SEALING MACHINE SUITABLE FOR PLASTIC AND LAMINATE TUBES. TUBE FILLING SPEED RATED UP TO 70 UNITS PER MINUTE, DEPENDING ON PRODUCT AND TUBE SIZE. AUTOMATIC CASSETTE TUBE INFEED SYSTEM. PHOTO ELECTRIC TUBE REGISTRATION SYSTEM. BOTTOM UP FILL. FULL INTERLOCKED GUARDING. STAINLESS STEEL HOPPER WITH PRODUCT LEVEL CONTROL.

1996 R. A. JONES PKH 4000 POUCH / SACHET FILLING MACHINE WITH CTC SPLICER AND KNIFE CUTOFF STATION S/N: S-5296 SPEED: 4000-5000 INCHES PER MIN, 1600 POUCHES PER MIN AT 3" CUTOFF AT 5000 MATERIALS: 1.5 TO 5 MIL, INCLUDING RETORTABLE AND ORIENTED POLY PROPYLENE SIZE RANGE: WIDTH AND LENGTH CAN BE CHANGED DEPENDING ON THE TUCKING MECHANISM OF THE MACHINE MAX WEB WIDTH: 24" VOLTS: 240 HZ: 60 PHASE: 3 1 - USED EV 037 ECCENTRIC LAP SLICER / CRIMPER MACHINE WITH PICK IN PLACE MODEL: HD-ALRS-900M SERIAL NUMBER: VOLTS: 115 HZ: 50/60 PHASE: 0 AMPS: 9 PRESSURE: 80PSI QUALITY: CLEAN NONLUBRICATED. DRY TO DEW POINT OF 40 DEGREES. THIS MACHINE IS TOOLED AND SET TO RUN A PACKET THAT IS 3'1/4'' LENGTH X 2''1/4'' WIDE CTC SPLICER THE CTC SPLICER UNIT DISPENSES WEB MATERIAL TO CREATE THE POUCHES, AND FEATURES AUTOMATIC SPLICING TO PROVIDE A CONTINUOUS SUPPLY OF WEB STOCK. EDGE GUIDE SYSTEM THE POSITION OF THE EDGE OF THE WEB WILL WILL VARY SLIGHTLY AS THE WEB UNWINDS. THE WEB PASSES BETWEEN THE EDGE OF THE GUIDE SENSORS WHICH MONITOR THE POSITION OF THE WEB. THE CORRECTION ROLLER SWIVELS TO KEEP THE WEB ALIGNED WITH THE PLOW. PLOW THE WEB IS HORIZONTALLY OVER THE PLOW, FORMING A LENGTHWISE FOLD NEAR THE CENTERLINE OF THE WEB. THE WEB IS FOLDED SLIGHT OFF- CENTER TO LEAVE A SMALL LIP USED TO OPEN POUCHES. THE FOLDED WEB IS VERTICAL AS IT LEAVES THE PLOW AND PASSES BETWEEN THE FORMER BLADES TO COMPLETE THE FOLD. THE WEB THEN PASSES THROUGH THE CREASING ROLLER ASSEMBLY WHERE THE FOLD IS CREASED INTO THE WEB. VERTICAL SEALER THE WEB WRAPS AROUND THE VERTICAL SEALER UNIT THAT FORMS THE VERTICAL POUCH SEALS. WHILE MOVING AROUND THE SEALER, THE WEB RIDES ON HEATED LANDS THAT FUSE THE SEALANT LINING OF THE WEB. THE WEB BETWEEN THE LANDS RECEIVES NO DIRECT HEAT AND DOES NOT SEAL. A PRESSURE ROLLER LIGHTLY PRESSES THE WEB AGAINST THE LANDS JUT BEFORE THE WEB LEAVES THE VERTICAL SEALER TO AID SEAL FORMATION. TEAR NOTCHER AS THE WEB IS PULLED BETWEEN THE TEAR NOTCHER AND ITS BACK-UP ROLLER, A NOTCH IS CREATED IN THE TOP EDGE OF THE WEB. THE PHASING OF THE TEAR NOTCHER CAN BE ADJUSTED. TO ALLOW PLACEMENT OF THE NOTCH ANYWHERE ALONG THE WEBS TOP EDGE. COOLING ROLLER THE COOLING ROLLER HAS TWO FUNCTIONS. FIRST, THE VERTICALLY SEALED WEB IS PULLED AROUND THE COOLING ROLLER TO ALLOW THE SEALS TIME TO SET BEFORE THE POUCHES ARE FILLED. SECOND, THE COOLING ROLLER ROTATES ON A MANUALLY-OPERATED SCREW THAT CAN BE ADJUSTED TO ALTER THE WEB POSITION AND ALIGN THE VERTICAL SEALS TO THE FILLER WHEEL VACUUM LANDS. TUCKING ROLLERS THE THREE TUCKING ROLLERS GUIDE THE WEB ONTO THE VACUUM LANDS OF THE FILLER WHEEL. THE ROLLERS ARE ARRANGED SO THAT THE WEB WINDS THROUGH THEM IN AN S-SHAPED PATH TO MAINTAIN PROPER TENSION. FILLER WHEEL ASSEMBLY AS THE WEBS VERTICAL SEALS ARE POSITIONED ON THE VACUUM LANDS BY THE TUCKING ROLLERS, AIR JETS B LOW THROUGH THE EMPTY FILLER WHEEL SPOUTS AND AGAINST THE WEB LIP TO COMPLETELY OPEN EACH POUCH. A TUCKER LOCATED BETWEEN EACH PAIR OF VACUUM LANDS RISES UP BELOW EACH POUCH TO CREATE A TUCK IN THE BOTTOM OFF THE POUCH TO AID POUCH OPENING. TOP SEALER THE POUCHES CLOYS AS THE WEB IS PULLED FROM THE FILLER WHEEL. AS THE WEB OF CLOSED POUCHES PASSES THROUGH THE TOP SEALER, THE TOP SEAL AREA IS HEATED BY HOT AIR TO SEAL THE POUCHES. SECOND FEED ROLLERS THE SECOND FEED ROLLERS, LOCATED JUST DOWNSTREAM FROM THE TOP SEALER, PULL THE WEB FROM THE FILLER WHEEL AND COMPRESS THE TOP SEAL. KNIFE AND TRANSFER SECTION THE KNIFE OPERATES INDEPENDENTLY FROM THE REST OF THE POUCH KING TO RECEIVE POUCHES THAT ARE COMPLETELY FORMED, FILLED, AND SEALED BUT STILL STRUNG TOGETHER. THE KNIFE CUTS THE POUCHES APART AND PASSES THEM TO THE TRANSFER. PIN CONVEYORS THE PIN CONVEYORS RECEIVE CUT POUCHES FROM THE KNIFES TRANSFER WHEELS AND MOVE THEM TO THE MARK III TRANSFER. WHILE THE LARGER POUCHES TAKE AN UNOBSTRUCTED ROUTE TO THE MARK III ON LANES 3 AND 4, THE SMALLER POUCHES ON LANES 1 AND 2 MAKE A RIGHT-ANGLE CHANGE IN DIRECTION BEFORE REACHING THE MARK III. GENERAL INFO: R.A JONES CREATED AND PATENTED THE POUCH KING , A HIGH PERFORMANCE POUCH-FILLING MACHINE MORE THAN 30 YEARS AGO. THIS IMPROVED, HIGH-END SYSTEM EMPLOYS PRINTED CIRCUIT HEATING TECHNOLOGY, WHICH PROVIDES A PRECISE TEMPERATURE PROFILE ACROSS THE VERTICAL SEAL BARS OF THE MACHINERY, MAKING A VIRTUALLY FLAWLESS LAMINATED SEAL. THE POUCH KING HAS A WIDE RANGE OF FEEDING SYSTEMS FOR BOTH INDIVIDUAL AND MULTI-COMPONENT BLENDS, ENABLING THE CUSTOMER TO HAVE OPTIMAL FILLING AND ACCURACY CONTROL. AFTER FILLING THE POUCHES, R.A JONES HAS A VARIETY OF TRANSFERS AVAILABLE, FROM MULTI-LANE DISCHARGE TO FULLY AUTOMATED CARTONING. THE POUCH KING CAN RUN OVER 4000 LINEAR INCH MINUTES IN STANDARD FORMAT AND OVER 7000 LINEAR INCHES OF WEB PER MINUTE FOR ULTRA HIGH SPEED APPLICATIONS. POUCH SIZE RANGE: LINEAR SPEED - OVER 7,000 LINEAR INCHES PER MINUTE POUCH WIDTH - 2 (51 MM) TO 8 (203 MM) POUCH HEIGHT - 2 (51 MM) TO 7.5 (190 MM) OPTIONAL HEIGHT RANGE - UP TO 10 (254 MM)

GFK BOSCH GFK1500 ENCAPSULATION MACHINE S/N: 640859 VOLTS: 460 HZ: 50/60 PHASE: 3 AMPS: 3.7 GENERAL INFO: 12 CAVITY SEGMENTS, SIZE 0 TOOLING CAPACITY : 90000 CAPSULES/HOUR SPEED: 60000 /H LENGTH:1300 MM WIDTH:1300 MM HEIGHT:1850 MM WEIGHT:1700 KG

1999 JCMCO JC-RT-16H TABLET PRESS S/N: 880210 PRODUCT SPECIFICATIONS: TYPE OF TOOLING: EU DIPTD TABLET DIAMETER MAX: 25.4MM (1) PRODUCTION CAPACITY (TABLETS PER HOUR): 17,000- 69,000 REVOLUTIONS OF TURRENT/MIN: 16-72 RPM DEPTH OF FILL ADJUSTABLE TO : 19MM (0.75) MAXIMUM OPERATING PRESSURE: 10,000KGS (22,000LBS) MAXIMUM PRE- PRESSURE: 3,000KGS (6,600LBS) DIAMETER OF DIE: 38.1 HEIGHT OF DIE: 23.81MM (0.9375) NOMINAL DIAMETER OF PUNCH BODY: 25.4MM (1) TURRET P.C.D.: 253MM POWER CONSUMPTION: 3 HP (2.2KW) MACHINE DIMENSIONS: 850 X 790 X 1,710MM (NOT INCLUDING HOPPER) NET WEIGHT: 1,200 KGS (2646LBS) PRODUCT FEATURES: ACCURATE TABLET COMPRESSION IN TWO STAGES TABLETTING COMPARTMENT SEPARATED FROM DRIVE MECHANISM EASY MAINTENANCE & CLEANING MEETS GMP EFFICIENT MEDIUM SIZE PRODUCTION RUNS, WITH CAPACITY UP TO 100,000 TABLETS PER HOUR; PRODUCT DESCRIPTION: CAM DESIGN & LUBRICATION: A CENTRAL LUBRICATION SYSTEM SUPPLIES OIL CONTINUOUSLY TO LOWER PUNCHES, WHILE GREASE APPLIED MANUALLY LUBRICATES UPPER PUNCHES. THE EJECTION CAM IS MANUFACTURED FROM SPECIAL TOOL STEEL FOR EXTENDED LIFE, WHILE A DOUBLE SIDED LIFTING CAM IS PROVIDED. UPPER & LOWER PUNCH SEALS: THE SCRAPERS SEALS FOR THE UPPER PUNCHES PROTECT TABLETS FROM OIL DRIP, WHILE THE DUST SEALS ON THE LOWERS PREVENT THE PUNCHES FROM BINDING AND REDUCE WEAR ON THE CAM. THIS COMBINED WITH AN EFFICIENT DUST EXTRACTION SYSTEM ALLOWS PROLONGED RUN WITH LITTLE DOWNTIME FOR CLEANING. DIRECT ROTATION OF TURRET: DIRECT ROTATION OF THE TURRET BY THE MAIN SHAFT REDUCES THE NOISE LEVEL; IT PROVIDE MAXIMUM PROTECTION TO THE GEARS AND THE DRIVE SYSTEM. PRE-COMPRESSION AND MAIN COMPRESSION: HIGH PRE-COMPRESSION OF 3000 KGS INSURES TROUBLE-FREE PROCESSING OF DIFFICULT GRANULES. IT HELPS IN THE DIRECT COMPACTION OF MATERIALS, REDUCING LAMINATION AND CAPPING. PRESSURE ROLLERS ARE MADE OF SPECIAL TOOL STEEL THAT ENSURES UNIFORM PRESSURE APPLICATION. THE DOUBLE BEARINGS ARE FITTED, WHICH MINIMIZE WEARING OF THE ROLLERS. FEEDING MATERIAL: THE FEEDER SUPPORT PLATFORM IS PRESET AT THE FACTORY TO THE CORRECT HEIGHT AND SHOULD NOT REQUIRE ADJUSTMENT. QUICK RELEASE CLAMPING SCREWS ALLOWS REMOVAL OF THE FEEDER FOR CLEANING AND TOOL CHANGEOVER WITHOUT THE NEED TO DISTURB THE FEEDER PLATFORM SETTING. MECHANICAL FEEDER: THE TWO CHAMBERS FEEDING SYSTEM HAS BEEN IMPROVED FURTHER. IT IS DRIVEN FROM TOP BY A VARIABLE SPEED MOTOR. THE UNIT CAN BE ASSEMBLED OR DISASSEMBLED EASILY. CLEANING AND TOOL CHANGEOVER: THE DETACHABLE PANELS CAN BE REMOVED EASILY, WHICH REVEAL THE ENTIRE BOTTOM PUNCH CAMS. THIS ALLOWS EASY REMOVAL OF THE BOTTOM PUNCHES. UPPER PUNCH MONITORING DEVICE IS AVAILABLE THAT WOULD SWITCH OFF THE MACHINE IN THE EVENT OF PUNCH TIGHTNESS.

BEIJING HANLINHANGYU GZPS-49 STATION TABLET PRESS D TOOLED MODEL: GZPS-49 PRODUCT SPECIFICTATIONS: NUMBER OF STATIONS: 49 TOOLING TYPE: D OUTPUT RANGE (TABLETS/H): 94000~423000 ROTATION SPEED RANGE (RPM): 16~72RPM MAIN PRESSURE: 100KN PRE-PRESSURE: 100KN MAX TABLET DIAMETER: F25MM MAX LENGTH OF IRREGULAR TABLET: 25MM DIAMETER OF DIE: F38.1MM MAX. FILLING DEPTH: 20MM MAIN MOTOR POWER: 11KW DIAMETER OF PUNCH: 25.35MM PITCH CIRCLE DIAMETER: 680MM WEIGHT: 4800KG OVERALL DIMENSIONS: 52"L X 52"W X 79"H PRODUCT FEATURES: MEETS GMP REQUIREMENTS. CAN PRESS ANNULAR, ROUND, ENGRAVED, IRREGULAR, AND TWO LAYER TABLETS WITH DIFFERENT COLORS. AUTOMATIC CONCENTRATIVE LUBRICATION SYSTEM. ISOLATED VISUAL WINDOW WITH HIGH CLARITY. EASY TO CLEAN, OPERATE AND MAINTENANCE. SPECIAL 4 POLE CONSTRUCTION ENSURES THE MACHINE TO PERFORM STABLY AND DURABLY. ADVANCED HEAT TREATMENT OF THE PUNCH TURRET ENSURES LONGEVITY OF MACHINE. BOTH WHEELS CAN BE INTERCHANGED. APPLICATIONS: PHARMACEUTICAL FOOD CHEMICAL INDUSTRIES

BEIJING HANLINHANGYU GZPS-49 STATION TABLET PRESS D TOOLED - 1 - BEIJING HANLINHANGYU GZPS-49 STATION TABLET PRESS D TOOLED MODEL: GZPS-49 PRODUCT SPECIFICATIONS: NUMBER OF STATIONS: 49 TOOLING TYPE: D OUTPUT RANGE (TABLETS/H): 94000~423000 ROTATION SPEED RANGE (RPM): 16~72RPM MAIN PRESSURE: 100KN PRE-PRESSURE: 100KN MAX TABLET DIAMETER: F25MM MAX LENGTH OF IRREGULAR TABLET: 25MM DIAMETER OF DIE: F38.1MM MAX. FILLING DEPTH: 20MM MAIN MOTOR POWER: 11KW DIAMETER OF PUNCH: 25.35MM PITCH CIRCLE DIAMETER: 680MM WEIGHT: 4800KG OVERALL DIMENSIONS: 52"L X 52"W X 79"H PRODUCT FEATURES: MEETS GMP REQUIREMENTS. CAN PRESS ANNULAR, ROUND, ENGRAVED, IRREGULAR, AND TWO LAYER TABLETS WITH DIFFERENT COLORS. AUTOMATIC CONCENTRATIVE LUBRICATION SYSTEM. ISOLATED VISUAL WINDOW WITH HIGH CLARITY. EASY TO CLEAN, OPERATE AND MAINTAIN. SPECIAL 4 POLE CONSTRUCTION ENSURES THE MACHINE TO PERFORM STABLY AND DURABLY. ADVANCED HEAT TREATMENT OF THE PUNCH TURRET ENSURES LONGEVITY OF MACHINE. BOTH WHEELS CAN BE INTERCHANGED. APPLICATIONS: PHARMACEUTICAL FOOD CHEMICAL INDUSTRIES

SHANGHAI TIANHE PHARMACEUTICAL MACHINERY CO GZP-55 55 STATION HIGH SPEED ROTARY TABLET PRESS THIS MACHINE IS A DOUBLE SIDE ROTARY TABLET PRESS, WHICH CAN PRESS GRANULAR MATERIALS INTO ROUND, IRREGULAR, OR DOUBLE-SIDE ENGRAVED TABLETS. PRODUCT FEATURES: HIGH SPEED WITH LARGE QUANTITY PUNCHES, DOUBLE PRESS ROLLERS, SUITABLE FOR MASS PRODUCTION. MADE OF STAINLESS STEEL, THE HOUSING IS FULLY ENCLOSED. THE SURFACE OF THE ROTARY TURRET IS COVERED WITH A HARDENED LAYER SO THAT THE TURRET SURFACE IS WEAR RESISTANT. THE MACHINE CONFORMS TO GMP REQUIREMENTS. DOUBLE IMPELLER TYPE FORCE FEEDER, IMPROVES GRANULES FLOW-ABILITY AND FILLING PERFORMANCE, AND ENSURES FILLING PRECISION. AUTOMATIC CENTRAL LUBRICATION SYSTEM ENSURES THE LUBRICATION OF PRESSURE ROLLERS, TOOLING AND TRACKS, EXTENDING THE WORK LIFE OF THE MACHINE. PRODUCT SPECIFICATIONS: MODEL: GZP-55 NUMBER OF STATIONS: 55 TOOLING STANDARD: B MAX MAIN PRESSURE (KN): 100 MAX PRE-PRESSURE (KN): 20 MAX TABLET DIAMETER (MM): ROUND TABLET: 18 IRREGULAR TABLET: 19 MAX FILLING DEPTH (MM): 18 MAX TABLET THICKNESS (MM): 8 MAX TURRET SPEED (R/MIN): 60 MAX PRODUCTION CAPACITY (PCS/H): 396,000 MOTOR POWER (KW): 11 OVERALL DIMENSIONS: 61"L X 50"W X 75"H WEIGHT: 9260 LBS APPLICATIONS: PHARMACEUTICAL CHEMISTRY SUPPLEMENTS VITAMINS

FULLY AUTOMATED HIGH SPEED HORIZONTAL FLOW WRAPPER ARTY 75H MODEL: ARTY75H-SERVO1 S/N: 9480917 VOLTS: 208/230 WATTS: 3450 AMPS: 15 PHASE: 1 PSI: 80 HZ: 60 FILM DIMENSIONS: 80MM X 40MM X 2MM GENERAL INFO: THE ARTY75H IS A VERSATILE, LOW MAINTENANCE, HORIZONTAL FLOW WRAPPER FOR PILLOW-TYPE APPLICATIONS AND OFFERS HI-VALUE FOR THE DOLLAR. THE END USERS ARE SMALL AND MEDIUM CORPORATIONS IN THE FOLLOWING INDUSTRIES: BAKERIES, BREAD, AND PASTRIES COOKIE MANUFACTURES CONFECTIONERY MANUFACTURERS CONTRACT PACKAGERS SNACK FOOD MANUFACTURERS FEATURES: NO TOOLS AND NO SPECIAL SKILLS ARE NEEDED FOR SETUP. TURN ONE HAND-WHEEL TO ADJUST THE BAG LENGTH, TURN ONE KNOB TO ADJUST THE BAG WIDTH, SWITCH OFF THE INFEED CONVEYOR AND PLACE IT IN POSITION WITH THE JAWS, GUIDE THE PRODUCT WITH THE TELESCOPIC SIDE RAILS. NO CHANGE PARTS ARE NEEDED FROM ONE APPLICATION TO ANOTHER BY USING AN ADJUSTABLE FORMING BOX AND TELESCOPIC SIDE RAILS. QUICK CHANGE-OVER MADE POSSIBLE BY USING A SELF-CENTERING REEL HOLDER. MAINTENANCE-FREE DRIVE SYSTEM USING A 3 PHASES AC MOTOR AND VARIABLE SPEED AC DRIVE. EASY CLEANING, ALL PARTS IN CONTACT WITH THE PRODUCT ARE REMOVABLE WITHOUT TOOLS AND ARE MADE FROM STAINLESS STEEL #304. LOW MAINTENANCE, PERMANENTLY LUBRICATED GEARBOX WITH SYNTHETIC OIL, MERCURY ROTARY SWITCHES INSTEAD OF SLIP RINGS AND BRUSHES, SELF-LUBRICATING BEARINGS EVERYWHERE THIS IS POSSIBLE. MOBILITY, THE MACHINE CAN BE EQUIPPED WITH FOUR CASTORS AND FOUR LEGS. ALL PARTS AND COMPONENTS ARE SOURCED IN NORTH AMERICA.

NATOLI NP-RD10A SINGLE STATION LAB TABLET PRESS. THE NP-RD10A TABLET PRESS IS IDEAL FOR PHARMACEUTICAL LABORATORY RESEARCH AND DEVELOPMENT WHEN ONLY SMALL SAMPLES ARE AVAILABLE FOR TESTING. THE NP-RD10A HAS MULTI-LAYERING CAPABILITIES AND PERMITS INDEPENDENT CONTROL OF BOTH TABLET HARDNESS AND WEIGHT TO MEET TABLET SPECIFIC PRODUCTION REQUIREMENTS AND SPECIFICATIONS.

2021 MOKON ASL4M05H1 CHILLER MODEL NUMBER: ASL4M05H1 SERIAL NUMBER: 800-4083 VOLTS: 460 FREQUENCY: 60 HZ FLA 26 TYPE ONE DESCRIPTION: CONTINUOUS, RELIABLE AND ACCURATE PROCESS CONTROL AVAILABLE IN 0.5 TO 50 TON CAPACITIES GREEN FRIENDLY REFRIGERANT FLUID TEMPERATURE RANGE 5F TO 65F (-15C TO 18C)

2021 AIRSTREAM RELIANT AR2-3S9 FUME HOOD ESCO CLASS II BCS AIRSTREAM RELIANT CLASS II TYPE A2 BIOSAFETY CABINETS (AR2) IS DESIGNED WITH ENERGY EFFICIENCY, ROBUSTNESS, COMFORT AND ERGONOMICS. THIS CABINET USES ULPA (ULTRA LOW PENETRATION AIR) FILTERS WHICH OPERATE AT A TYPICAL EFFICIENCY OF 99.999% WHICH IS TEN TIMES THE CONTAMINATION PROTECTION OVER CONVENTIONAL HEPA FILTERS. IT ALSO PROVIDES OPERATOR COMFORT THROUGH ITS RAISED ARM REST WHICH HELPS PREVENTS GRILLE BLOCKING WHILE PROVIDING OPERATORS WITH COMFORTABLE WORKING POSITION. S/N: 2021164738

2018 MGS TLC CARTONER MD: TLC VOLTS: 4780 PH: 3 HZ: 60 FLA: 48 SCCR: 65 LARGEST LOAD: 10. 6 S/N: 17739

OSCILLATING GRANULATOR 5 LITER 5L MACHINE THAT MIXES MICROGRAMS WITH GRAMS FOR AN EVEN CONSOLIDATION

BUDZAR LTW 22.5 SP PROCESS CHILLER VOLTS: 160 PHASE: 3 FREQUENCY: 60 HZ FULL LOAD AMPERAGE: 36.97 MAX FUSE SIZE: 50A MCA FOR 1.5 A. DESCRIPTION: LARGEST MOTOR 15 HP ENCLOSURE TYPE NEMA1 COOLING CAPACITY 1.95 TR -100 FAHRENHEIT. PUMP RATING, 12/2 TO GMT AT 164/59TDH PROCESS FLUID SYLTHERM XLT S/N: 20160729274

GUANGZHOU SHAOFENG CO. S.S. STORAGE TANK 265 GALLON 1 TON CAPACITY, 316 STAINLESS STEEL. INLET 51 MM PIPE. BOTTOM OUTLET.

GUANGZHOU SHAOFENG CO. S.S. STORAGE TANK 265 GALLON 1 TON CAPACITY, 316 STAINLESS STEEL. INLET 51 MM PIPE. BOTTOM OUTLET.

2004 IMA IMPRESSA IMP 130 ENCAPSULATION MACHINE S/N: PC1009 CAPACITY: 126000 U/H CAN DO CAPSULE SIZES ANYWHERE FROM 000-5 TOOLING WITH MACHINE: 0, 0L, 00 THE IMPRESSA CAPSULE FILLER IS ABLE TO DOSE POWDERS, PELLETS AND LIQUIDS INTO THE HARD GELATINE CAPSULES. THE MACHINE FEATURE AN INNOVATIVE TAMPING PIN POWDER DOSING UNIT AND A VOLUMETRIC PELLET AND LIQUID DOSING UNITS, GUARANTEEING HIGH PERFORMANCES IN TERMS OF SPEED AND DOSING PRECISION. THE IMPRESSA CAPSULE FILLER IS ABLE TO DOSE POWDERS, PELLETS AND LIQUIDS INTO THE HARD GELATIN CAPSULES. THE MACHINE FEATURE AN INNOVATIVE TAMPING PIN POWDER DOSING UNIT AND A VOLUMETRIC PELLET AND LIQUID DOSING UNITS, GUARANTEEING HIGH PERFORMANCES IN TERMS OF SPEED AND DOSING PRECISION. MAIN CHARACTERISTICS POSSIBILITY OF SEPARATELY ADJUSTING THE MACHINE WORKING PARAMETERS ALLOWING EXCELLENT RESULTS WITH THE MOST DIVERSE PRODUCTS. THE WORKING AREA HAS BEEN COMPLETELY ISOLATED FROM THE MECHANICAL AREA, THUS PREVENTING THE POWDER FROM PASSING TO THE LOWER PART OF THE MACHINE. THIS FEATURE, TOGETHER WITH THE CENTRALIZED LUBRICATION SYSTEM, REDUCES MAINTENANCE OPERATIONS AND GUARANTEES LONGER MACHINE LIFE. THE MACHINE CAN BE FITTED WITH 100% IN-LINE INDIRECT CONTROL OF NET WEIGHT BY MEASURING COMPRESSION FORCE.

AF-90T FULLY AUTOMATIC CAPSULE-FILLING MACHINE THAT CAN FILL A LARGE VARIETY OF POWDER FORMULATIONS INTO HARD GELATIN CAPSULES. PRODUCT SPECIFICATIONS: MAIN MOTOR: 1.5 KW ( 2 HP) AT 1440 RPM. VACUUM REQUIRED (CAPSULE SEPARATION): 1100 LPM AT 26 OF MERCURY. VACUUM REQUIRED (CLEANING): 2800 LPM AT 4 OF MERCURY COMPRESSED AIR: 300 LPM AT 6KG/CM2 OUTPUT: UP TO 90,000 CAPSULES/ HOUR FOR POWER FILLING UP TO 80,000 CAPSULES/ HOUR FOR PELLET FILLING UP TO 50,000 CAPSULES FOR TABLET FILLING (SINGLE TABLET) PRODUCTS: POWDERS PELLETS MICRO TABLETS COMBINATION FILINGS TOOLING SIZES 0, 0L, 00, 1 COME WITH MACHINE NO POLISHER OR METAL DETECTOR COMES WITH OPERATIONS MANUAL VOLTS: 415 HERTZ: 50 PHASE: 3 OVERALL DIMENSIONS: 1650MM X 1290MM X 2050MM WEIGHT: 2350 KGS

IMA TR 100LT BLISTER PACKAGING MACHINE THE IMA BLISTER MACHINE MODEL TR 100LT A STAND ALONE COMPLETE PACKAGING MACHINE, DESIGNED AND MANUFACTURED TAKING INTO CONSIDERATION GMP STANDARDS. THE TR 100LT HAS A BALCONY TYPE CONSTRUCTION WITH WORKING ASSEMBLIES AT THE FRONT. TR 100 L IS AN INTERMITTENT MOTION, FLAT, COMPRESSED AIR FORMING AND FLAT SEALING BLISTER PACKING MACHINE WITH AN OUTPUT MAX. 150 PACKS/MINUTE. SPECIALLY DESIGN FOR TABLET & CAPSULES, THE IMA TR100 LT CAN BE USED TO THERMOFORM OR COLD FORM BLISTERS USING ALL KINDS. ELECTRICAL: 400V, 50HZ, 3 PHASE INCLUDES THE FOLLOWING: EURCOLD CHILLER (ELECTRICAL: 230V, 50/60HZ) ADVANTAGE PORTABLE CHILLER MODEL: MI-0.5A-21HF SERIAL NO: 124414 VOLTAGE: 230/1/60 FLA: 9.2 PLATEN PRINTER MODEL: 808. 25. 5. 5R SERIAL NUMBER: 57978 CURRENT: AC VOLTS: 220 CYC: 50

265 GALLON STAINLESS STEEL STORAGE TANK 265 GALLON 1 TON CAPACITY, 316 STAINLESS STEEL. INLET 51 MM PIPE. BOTTOM OUTLET.

WATERS 2695 HPLC SEPARATIONS MODULE. INPUT: 100-240V AMPS: 9.5 FREQUENCY: 47-63HZ DESCRIPTION: THE WATERS ALLIANCE 2695 HPLC SEPARATIONS MODULE CAN BE USED FOR IN-VITRO DIAGNOSTIC TESTING TO ANALYZE MANY COMPOUNDS, INCLUDING DIAGNOSTIC INDICATORS AND THERAPEUTICALLY MONITORED COMPOUNDS. THE SEPARATIONS MODULE IS AN INTEGRATED SOLVENT AND SAMPLE MANAGEMENT PLATFORM. FULL SPECTRUM DUAL ABSORBANCE DETECTOR 2487 SN: K04487 VOLTAGE: 100-240 AMPS: 3.5 FREQUENCY: 50-60 DESCRIPTION: YOU CAN USE THE WATERS 2487 DUAL ABSORBANCE DETECTOR FOR IN-VITRO DIAGNOSTIC TESTING TO ANALYZE MANY COMPOUNDS, INCLUDING DIAGNOSTIC INDICATORS AND THERAPEUTICALLY MONITORED COMPOUNDS.

2019 METTLER TOLEDO SAFELINE METAL CHECK VOLTAGE: 110 AMPERAGE: 4A PHASE: 1 FREQUENCY: 50/60 S/N: B921693148

2014 METTLER TOLEDO SAFELINE METAL CHECK SERIAL NUMBER: C114493105 MODEL TO AL VOLTAGE: 100240 AMPERAGE: 3A FREQUENCY: 60 HZ

2014 METTLER TOLEDO SAFELINE METAL CHECK METAL DETECTOR VOLTAGE: 100-240 FREQUENCY: 60 HZ S/N: 522581

2021 SUNNY GROUP CANISTER WET WIPES LINE LABELING MACHINE VOLTS: 220 HERTZ: 50 CAPACITY: 2000 TO 3000 BOTTLES AN HOUR OVERALL DIMENSIONS: 2000 MM X 1500 MM X 800 MM WEIGHT: 200 KG

2021 SUNY GROUP CANISTER WET WIPES LINE LABELING MACHINE VOLTS: 220 HERTZ: 50 CAPACITY: 2000 TO 3000 BOTTLES AN HOUR OVERALL DIMENSIONS: 2000 MM X 1500 MM X 800 MM WEIGHT: 200 KG

2021 SUNNY GROUP CANISTER WET WIPES LINE LABELING MACHINE VOLTS: 220 HERTZ: 50 CAPACITY: 2000 TO 3000 BOTTLES AN HOUR OVERALL DIMENSIONS: 2000 MM X 1500 MM X 800 MM WEIGHT: 200 KG

2005 INCAP DOTT BONAPACE & C. IN-CAP CAPSULE FILLING MACHINE S/N: 256/05 VOLT: 110 HZ: 60 BAR: 6 DESCRIPTION: 3 FULL SETS OF TOOLING CAPABLE OF PROCESSING POWDER, LIQUID, PELLETS OR CAPSULES DOSATOR AN ALTERNATIVE TO THE TAMPING POWDER SYSTEM. IT ALLOWS PROCESSING POWDERS UNSUITABLE FOR THE TAMPING PROCESS. THIS DEVICE INCREASES THE RANGE OF POWDERS WHICH THE IN-CAP MACHINE CAN PROCESS. PELLETS FEEDER IT HAS BEEN DESIGNED TO FILL PELLETS. THE CAPSULE FILLING MACHINE IS SUITABLE TO SET 3 DIFFERENT PELLETS FEEDERS ALLOWING TO PROCESS 3 DIFFERENT PRODUCTS AT THE SAME TIME. LIQUID FILLER A DEVICE DESIGNED FOR ALL LABS R&D DEPTS ETC., WHICH NEED TO FILL LIQUIDS INTO A CAPSULE. IT HAS A 2.3L HEATED HOPPER + AN ADJUSTABLE SPEED STIRRER. THE FILLING NOZZLE HAS BEEN DESIGNED TO FILL FROM 0.15 MG UP TO 1000 MG. TABLET/CAPSULE FILLER A SPECIAL DEVICE DESIGNED TO FILL TABLETS (ALSO MINI) OR CAPSULE-IN-CAPSULE (CIC). IT HAS BEEN DEVELOPED FOR SPECIAL APPLICATIONS AND IT INCREASES THE RANGE OF POSSIBLE COMBINATIONS AVAILABLE.

2021 HIGH SPEED CHECK WEIGHER