NutraPharma Packaging Equipment Multiple Locations

STAINLESS STEEL, MICRO PULVERIZER SIZE 2W 20HP VOLTS: 230/460 AMPS: 5.6/2.8 RPM: 1760 FRAME: 165TC HP: 2 WITH ALLEN BRADLEY ELECTRICAL INCLUDES A VARIETY OF SCREENS

NEOGEN HEATER VOLTS: 120 AMPS: 0.75A WATTS: 90 HERTZ: 90 PHASE: 1 TURNS ON

1994 NUAIRE NU-1500 CO2 WATER JACKETED INCUBATOR S/N: 59100 VOLTS: 115 HZ: 60 PHASE: 1 AMPS: 5 MDL: NU-2500 S/N: 5214OXW MFG. 1992 VOLTS: 115 HZ: 60 PHASE: 1 AMPS: 5 WATTS: 550

10 LANE PAINTBALL SORTING MACHINE WITH VIBRATORY DECK AND DUAL HOPPER

VWR 1400E OVEN VOLTS: 115 FREQUENCY: 60 HZ AMPS: 4 DIGITAL MANUAL: DESCRIPTION: THIS UNIT IS AN ECONOMY VACUUM OVEN FOR PROFESSIONAL, INDUSTRIAL OR EDUCATIONAL USE WHERE THE PREPARATION OR TESTING OF MATERIALS IS DONE AT APPROXIMATELY ATMOSPHERIC PRESSURE AND NO FLAMMABLE, VOLATILE OR COMBUSTIBLE MATERIALS ARE BEING HEATED. THIS UNIT IS NOT INTENDED FOR HAZARDOUS OR HOUSEHOLD LOCATIONS OR USE. S/N: 0901802

INDCO'S HEAVY DUTY LIFT MIXERS ARE POWERFUL FLOOR-MOUNTED MIXING STATIONS FOR BLENDING DRUMS OF HIGH VISCOSITY LIQUIDS. THE 10:1 GEAR RATIO, 1 12" DIAMETER 316 STAINLESS STEEL SHAFT AND 15" 3-BLADE AXIAL FLOW TURBINE PROVIDE EXCELLENT AGITATION OF HEAVY MATERIALS. THE PNEUMATIC LIFT CYLINDER HAS AN OPERATING RANGE OF 36" FOR A TOTAL RAISED HEIGHT OF 104" AND SECURELY HOLDS 55-GALLON DRUMS IN PLACE WITH THE ADJUSTABLE CHAIN RESTRAINT.THIS 3 HP TOTALLY ENCLOSED FAN COOLED ELECTRIC MODEL REQUIRES 230 VOLT, 1 PHASE 60 HZ INPUT AND HAS 0-175 RPM DC VARIABLE SPEED. THE MOTOR IS EQUIPPED WITH MOTOR LEADS ONLY. THE IMPELLER IS KEYED AND ATTACHES TO THE 45" LONG SHAFT WITH SET SCREWS. THE LEFT HAND IMPELLER DESIGN PRODUCES DOWNWARD FLUID MOTION WITH CLOCKWISE ROTATION AS VIEWED FROM ABOVE. ALL WETTED PARTS ARE 316 STAINLESS STEEL FOR CHEMICAL RESISTANCE. THIS ELECTRIC MODEL FEATURES A BALDOR MOTOR KNOWN FOR QUALITY AND RELIABILITY.

BARNSTEAD INTERNATIONAL D11911NANOPURE ANALYTICAL UV SYSTEM S/N:1191030399588 VOLTS: 100240 FREQUENCY: 60 HZ DESCRIPTION: THE IDEAL SYSTEM FOR YOUR CRITICAL APPLICATIONS REQUIRING 18.2 MEGOHM WATER WITH LESS THAN 2 PPB TOTAL ORGANIC CARBON. THE WATER PRODUCED IS PERFECT FOR APPLICATIONS REQUIRING LOW ORGANICS INCLUDING; HIGH PERFORMANCE LIQUID CHROMATOGRAPHY HPLC, ION CHROMATOGRAPHY IC, GAS CHROMATOGRAPHY/ MASS SPEC. GC/MS AND TOC DETERMINATIONS. A DUAL WAVELENGTH UV LAMP OXIDIZES ORGANICS DOWN TO VIRTUALLY UNDETECTABLE LEVELS AND ALSO MAINTAINS MINIMAL BACTERIAL LEVELS WITHIN THE SYSTEM. THE SYSTEM ALERTS YOU WHEN IT IS TIME TO CHANGE THE UV LAMP.

THERMO SCIENTIFIC POLY 15 CIMAREC I MULTIPOINT (MULTI-POSITION STIRRER) DESCRIPTION: RUGGED, POWDER-COATED, STAINLESS-STEEL HOUSING STIR SPEEDS UP TO 990RPM SUITABLE FOR 15 250ML BEAKERS OR 6 1L FLASKS IP32 PROTECTION RATED VAROMAG ELECTRONICRUHRER POLY 15 (MULTI-POSITION STIRRER) DESCRIPTION: MULTI-POSITION STIRRERS WITH DIRECT CONTROL FOR UP TO 15 VESSELS, ARE IDEAL FOR GENERAL LABORATORY AND MASS SCREENING APPLICATIONS. UNITS PROVIDE SMOOTH STIRRING EVEN AT LOW SPEEDS AND ARE SUITABLE FOR USE WITH 15250 ML BEAKERS OR 61 LITRE FLASKS. -ROBUST AND COMPACT CONSTRUCTION WITH POWDER COATED STEEL HOUSING -MAINTENANCE AND WEAR FREE MOTOR -EASY TO USE MICROPROCESSOR CONTROL -FULLY SYNCHRONIZED SPEEDS FOR 100% COMPARABILITY OF SAMPLES -CAN BE USED AT -10 TO +40 C (95% RELATIVE HUMIDITY)

BENCHTOP SOLDERING-FUME EXTRACTOR HAVE TWO ARTICULATING ARMS TO REMOVE FUMES FROM TWO WORKSTATIONS. THE ARTICULATING ARMS CAN BE POSITIONED INDIVIDUALLY AROUND ONE OR TWO WORKPIECES. EXTRACTORS FILTER CONTAMINATED AIR AND RETURN CLEAN AIR TO THE WORKSPACE, ELIMINATING THE NEED FOR VENTING TO AN OUTSIDE SPACE.

IKA WORKS DR 2000 THREE-STAGE HIGH SHEAR INLINE DISPERSING MACHINE USED FOR THE PRODUCTION OF VERY FINE EMULSIONS AND SUSPENSIONS. SHEAR FORCES THAT OCCUR IN THE WORKING CHAMBER PRODUCE A DRASTIC INCREASE OF MASS TRANSFER AND ACCELERATE THE DISSOLVING RATES OF MONO AND MACROMOLECULAR SUBSTANCES. THREE ROTOR-STATOR COMBINATIONS (GENERATORS) IN A SERIES ENSURE SMALL- DROPLET OR PARTICLE SIZE AND A VERY NARROW DISTRIBUTION SPECTRUM. THIS PROCESS PROMOTES A LONG STABILITY OF MIXTURES IN A SINGLE PASS, ESPECIALLY WHEN WORKING WITH EMULSIONS.THE DISPAX-REACTOR INLINE MACHINE USES SHEAR PRINCIPLES SIMILAR TO THE POPULAR ULTRA-TURRAX MACHINES UTC AND UTL. MINIMIZED VOLUME IN THE MIXING CHAMBER ENSURES UNIFORM SHEAR ON THE PRODUCT.FOR DISCONTINUOUS PROCESSES, THE INLINE MACHINE DR CAN BE INSTALLED WITH A BATCH TANK OR REACTOR CONTAINING THE PRE-MIXED PRODUCT. WHEN THE MIXTURE PASSES THROUGH THE DISPERSING MACHINE, IT IS HOMOGENIZED OPTIMALLY.FOR CONTINUOUS PROCESSES, THE COMPONENTS TO BE MIXED ARE FED INTO THE MACHINE AT AN APPROPRIATE RATE THROUGH THE INLET CONNECTIONS. HERE, THE COMPONENTS ARE THOROUGHLY MIXED, DISPERSED OR HOMOGENIZED WITHIN THE MACHINE, AND THEN DISCHARGED THROUGH THE OUTLET.IN ORDER TO CONFIGURE THE DISPAX-REACTOR DR TO MEET A VARIETY OF APPLICATION NEEDS, IKA OFFERS A WIDE SELECTION OF GENERATORS. THE STANDARD ROTOR-STATOR (GENERATOR) COMBINATION CONSISTS OF A COARSE, MEDIUM AND FINE ROTOR-STATOR. WHEN INSTALLED IN A SERIES, THIS CONFIGURATION ENSURES SATISFACTORY PARTICLE SIZE REDUCTION WHILE PROVIDING OPTIMUM DISPERSING RESULTS IN A SINGLE PASS.THE HIGH SHEAR DISPERSING MACHINE DISPAX-REACTOR DR 2000 IS AVAILABLE IN EIGHT SIZES. THE POSSIBLE THROUGHPUT VARIES FROM 80 (DR 2000/03) UP TO 125.000 L/H (DR 2000/50) WHEN USING WATER. ALL SIZES OF MACHINES WORK WITH THE SAME CIRCUMFERENTIAL SPEED OF THE ROTOR WHICH PROVIDES A RELIABLE SCALE-UP. PREMIER MILL CORP MXS3 S/N: MXS3920760 10098 DATE: 2000 VOLTAGE: 460 HORSEPOWER: 3

EATON / CAPLUS TECHNOLOGIES HSG160 GRANULATOR MACHINE S/N: 020601

33-0A0-013 PHASE FIRE SHRINK TUNNEL VOLTAGE: 220 AMPS: 30 KW: 12 PHASE:3 APERTURE: 14 S/N: A-17L07-2027

PHASE FIRE SHRINK TUNNEL MODEL: 33-0A0-013 S/N: A-17L07-2026 VOLTS: 220 AMPS: 30 KW: 12 PHASE 3 APERTURE: 14

2017 PALLAY PACK PPS906 PHARMA PACKAGING SYSTEM PHARMA COUNT 2-2R3 VOLTAGE: 110 PHASE: 1 HZ: 60

LITTLEFORD NO 6 REGAL VERTICAL PLANETARY BATCH MIXER INCLUDES BLADES THAT ROTATE ON THEIR OWN AXES, WHILE ORBITING THE MIX VESSEL ON A COMMON AXIS. OUR UNIQUE BLADE DESIGN CONTINUOUSLY ADVANCES ALONG THE PERIPHERY OF THE BOWL, REMOVING MATERIAL FROM THE WALL AND TRANSPORTING IT TO THE INTERIOR FOR MIXING. AFTER ONE REVOLUTION THE BLADES PASS THROUGH THE ENTIRE BOWL, AFTER THREE REVOLUTIONS THE BULK OF THE MATERIAL IS MIXED, AND AFTER ONLY 36 REVOLUTIONS, THE BLADES CONTACT AND VIRTUALLY MIX THE ENTIRE BATCH RESULTING IN A HOMOGENEOUS MIXTURE. PROCESSING ENERGETICS MATERIALS THIS MIXER WAS SPECIFICALLY DESIGNED TO HANDLE THE PROCESSING OF ENERGETICS MATERIALS IN A SAFE MANNER. IT HAS BEEN ENGINEERED TO HAVE AN AMPLE AMOUNT OF POWER, PULL A FULL ATMOSPHERE OF VACUUM WITHOUT CONTAMINATING SEALS OR PULLING LUBE OIL INTO THE MIX, AND ACHIEVE FULL MIX IN A VERY SHORT AMOUNT OF TIME. B&P LITTLEFORDS EXTENSIVE EXPERIENCE WITH THE ENERGETICS INDUSTRY CLEARLY INDICATED ADAPTING AN EXISTING MIXER WOULD NEVER BE GOOD ENOUGH THIS MIXING MACHINE WAS CREATED FOR ENERGETICS FROM THE GROUND UP. MACHINE IS EQUIPPED WITH A CHANGING BOWL FEATURE. VFD WITH MOTOR SPEED FROM 1800 TO 180 CENTER AGITATOR RPM 37 TO 3.7 RPM OUTER AGITATOR 148 TO 14.8 RPM ORBITING SPEED 20 TO 2 RPM MIXING BOWLS ARE 304 SS AS ARE THE AGITATORS WORKING CAPACITY 6 US GAL ALTHOUGH 7.5 GALLONS CAN BE MIXED EFFICIENTLY FOR MANY MIXES TO AS LITTLE AS 1 GALLON OF MIX TOTAL CAPACITY OF THE BOWL IS 10 GAL INSIDE THE MIXER OUTSIDE IS 13 GAL THE BOWL IS DESIGNED FOR VACUUM AT 200F THE BOWL IS JACKETED FOR HEATING OR COOLING AND JACKET IS DESIGNED FOR 125 PSI AT 200F THE JACKET IS ALSO BAFFLED FOR CIRCULATION AND HAS A 3 GAL CAP THE BOWL WEIGHS APPROX. 600 LB EMPTY

2008 BOWA JACKETED MIXING TANK 1600L CAP 1600 LITER CAPACITY 95 LITERS EXTERNALLY S/N: 31798 MFG: 2008 CAPACITY: 1600, 95 LITER MAX PS: -1/1, 1 BAR MAX TEMP: 100C TEST PRESSURE: 1.5, 2.9 BAR

2003 FELDMEIER TANK 1200 GALLONS S/N: S51502 MATERIAL: STAINLESS STEEL TANK VOLUME: 4782L/ 1263GAL HAS MIXING SHAFT VESSEL MAWP: 25 PSI AT 176 OF MIN. DESIGN METAL TEMP.: -22OF AT 25 PSI JACKET MAWP: 50/FV PSI AT 176OF MIN. DESIGN METAL TEMP.: -22OF 50/FV PSI VESSEL DIMENSIONS: 80" DIAMETER WITH A 60" STRAIGHT WALL. GENERAL INFO: DOME TOP EQUIPPED WITH A 12 PADDLE AGITATOR POWERED BY A 3 HP DRIVE, 30" X 16" OVAL MAN WAY, (3) 6"ID VENTS, (2) 34" THREADED PORTS AND (1) 312" OD, 234" ID TRI-CLAMP FITTING. SIDE WALL CONTAINS ONE 34" THREADED PORT AND ONE PRESSURE GUAGE. DISH BOTTOM HAS A 34" THREADED DRAIN PLUG AND 612"OD, 512" ID TRI-CLAMP CENTER BOTTOM DISCHARGE WITH 18" GROUND CLEARANCE. MOUNTED ON FOUR STAINLESS STEEL LEGS. OAD: 93"L X 93"W X 118"H

1993 SERPACK 14 VERTICAL FORM FILL AND SEAL MACHINE TYPE: DT 52D VOLTS: 240 HERTZ: 60 S/N: 16406

MUELLER ACCU THERM PLATE HEAT EXCHANGER MODEL: 8 40LF 20

CHEM TAINER 1100 FOOD GRADE CHEM TAINER HOLDING TANK ***COMES AS A PAIR OF TANKS*** USED IN A KOMBUCHA FACILITY 1100 GALLON CAPACITY 6 FOOT DIAMETER 14 INCH MANHOLE ON TOP 3 PORTS FOR DRAINING ON THE SIDE 8 FEET TALL

14 HEAD SCALE WITH BUCKETS AND MEZZANINE

MJK2027 ELC-8-1 48" ACCUMULATION TABLE ELC-8-1 STEEL FRAME MDL ELC-8-1 220V 60HZ GROSS WEIGHT 180KG

METAL DETECTOR (INCOMPLETE) FOR PARTS/ INCOMPLETE 22X 8H APPERERATURE

48" ACCUMULATION TABLE - 1- 48 ACCUMULATION TABLE DISMANTLED

2008 BOWA JACKETED MIXING TANK 1600L CAP - 1- USED BOWA JACKETED MIXING TANK FEATURES 1600 LITER CAPACITY 95 LITERS JACKET S/N: 31797

CHEM TAINER 1100 FOOD GRADE CHEM TAINER HOLDING TANK ***COMES AS A PAIR OF TANKS*** USED IN A KOMBUCHA FACILITY 1100 GALLON CAPACITY 6 FOOT DIAMETER 14 INCH MANHOLE ON TOP 3 PORTS FOR DRAINING ON THE SIDE 8 FEET TALL

CHEM TAINER 1100 GALLON CAPACITY 6 FOOT DIAMETER 14 INCH MANHOLE ON TOP 3 PORTS FOR DRAINING ON THE SIDE 8 FEET TALL ***COMES AS A PAIR OF TANKS*** USED IN A KOMBUCHA FACILITY

CHEM TAINER 1100 GALLON CAPACITY 6 FOOT DIAMETER 14 INCH MANHOLE ON TOP 3 PORTS FOR DRAINING ON THE SIDE 8 FEET TALL ***COMES AS A PAIR OF TANKS*** USED IN A KOMBUCHA FACILITY 1100 FOOD GRADE CHEM TAINER HOLDING TANK

AIR LIGHTNING EV1P25A MIXER SPX, SIDE ATTACHMENT MODEL NO. EV1P25A, S/N: 1669863

2015 ALLOY 15 GALLON S.S. VESSEL 15 GALLON ALLOY STAINLESS STEEL VESSEL RATED AT 133PSI AT 100F, S/N: C226340-1-001, DIMENSIONS: 17'' DIAMETER X 50''H, WITHOUT CART

2015 ALLOY 15 GALLON S.S. VESSEL RATED AT 133PSI AT 100F. S/N: C226340-1-002. DIMENSIONS 17'' DIAMETER X 50''H. WITH PORTABLE CART.

2018 LOCK INSPECTION INSIGHT PH METAL DETECTOR POWER VOLTAGE 100-240VAC, 50/60HZ, 3A MAX. S/N: PH6R1S3BNNU-44376D

5 GALLON STAINLESS STEEL PRESSURE TANK TOP LIDS AND CLAMPS ARE MISSING, 185 PSI RATED AT 100F, S/N: C25031-1, DIMENSIONS: 10'' DIA. X 27''TALL

5 GALLON STAINLESS STEEL PRESSURE TANK. TOP LIDS AND CLAMPS ARE MISSING, 185 PSI RATED AT 100F, DIMENSIONS: 10'' DIA. X 27''TALL

MJK1882 36" ACCUMULATION TABLE - 1- 36" ACCUMULATION TABLE ONE TABLE.

1998 MARBURG M-625-SVPC AUTOCAPSEALER AIR 80 PSI VOLTS: 120 S/N: 6634

350 LITER FELDMEIER TANK, FULLY ENCLOSED.

2006 FELDMEIER 220 LITER TANK/RECEIVER VESSEL RATED 60/FV PSI AT 250F, WITH SIDE HANDLE BAR, MOUNTED ON 4 CASTERS, LIDS AND CLAMPS ARE MISSING, FULLY ENCLOSED

ACCUMULATION TABLE ONE TABLE

2007 SPEEDAIRE BY DAYTON 5Z698A AIR COMPRESSOR WITH 30 GALLON TANK HP: .75 30 GALLONS SERIAL NUMBER: L10/2/2007- 724575- 40 VOLTS: 208 230 HERTZ: 60 PHASE: 3

IMAJE JAMIE 1000 INK JET PRINTER

CHARLES LAPIERRE INC UNICAP-200 CAP TORQUER WITH AUTOMATION DEVICES VIBRATORY FEEDER. 8 SPINDLE ADJUSTABLE BELT HEIGHT. ON/OFF SWITCH. EMERGENCY STOP. ON CASTERS. VOLTAGE: 110 AMPS: 15. AUTOMATION DEVICES VIBRATORY FEEDER MODEL 15 SERIAL: 1510032 VOLTS 120 HZ 60

CHARLES LAPIERRE INC UNICAP-200 CAP TORQUER - 1-USED CHARLES LAPIERRE INC UNICAP-200 CAP TORQUER MODEL: UNICAP-200 SERIAL: 13779106 VOLTAGE: 110 AMPS: 20 8 SPINDLE ADJUSTABLE BELT HEIGHT ON/OFF SWITCH EMERGENCY STOP ON CASTERS

600 LITER FELDMEIER TANK, STAINLESS STEEL, SHELL 316L, VESSEL MAWP 60PSI AT 300F, EXTERNAL MAWP FV PSI AT 300F, VESSEL MDMT -20F AT 60/FV PSI, SIDE HANDLE BAR, MOUNTED ON 4 CASTERS, SOME LIDS AND CLAMPS ARE MISSING, BOTTOM SLOPE, CENTER DISCHARGE, NO VALVE, FULLY ENCLOSED.

MUELLER MJK1863 TANK 6000 GALLONS