Industrial Electronic Manufacturing Process Equipment Parts Tools Day 3 of 3 day event

[AMISTAR AI-800] AXIAL INSERTER FOR PARTS/REPAIR MISSING A CIRCUIT BOARD - MANUFACTURER: AMISTAR MODEL: AI800 CONDITION: FOR PARTS OR NOT WORKING. THIS INSERTER IS NOT COMPLETE. IT IS MISSING AT LEAST ONE CIRCUIT BOARD INSIDE. THERE IS ALSO WEAR AND BLEMISHES FROM PRIOR USE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS IS NOT WORKING PROPERLY. THE INSERTER POWERS ON. WHEN WE FIRST CONNECTED POWER, THERE WAS AN ERROR ABOUT SOME MOVING PART BEING BLOCKED. WE SHUT DOWN, APPLIED AIR AND TURNED BACK ON. IT NO LONGER COMPLAINED ABOUT BEING BLOCKED. THE CONTROLLER DOES NOT RESPOND TO BUTTON PRESSES. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) AMISTAR AI-800 INSERTER SPECIFICATIONS: MANUFACTURER: AMISTAR MODEL: AI-800 AXIAL COMPONENT INSERTER NOT COMPLETE SEE NOTES/PICTURES! SKU: P05D018 5B-02-02(1) 214LBS - 48IN X 43IN X 44IN

CONVEYOR TECHNOLOGIES .5 METER PCB CONVEYOR WITH PREHEATER

[DEPRAG] 346-518UD STRAIGHT 1/4" HEX PNEUMATIC SCREWDRIVERS - FOR PARTS OR NOT WORKING. COMES IN NON-ORIGINAL PACKAGING. THE AIR DRIVERS ARE IN USED CONDITION WITH SCUFFS, SCRATCHES, AND SOME GREASE RESIDUE FROM PREVIOUS USE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THE UNITS WERE REMOVED FROM DECOMMISSIONED ENVIRONMENTS. THE UNITS ARE BEING SOLD AS IS FOR PARTS OR REPAIR DUE TO BEING UNABLE TO VERIFY CALIBRATION, AND THEREFORE TEST THE UNITS. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (2)AS/IS DEPRAG 346-518UD STRAIGHT 1/4" HEX PNEUMATIC SCREWDRIVERS SPECIFICATIONS: MANUFACTURER: DEPRAG MODEL: 346-518UD PNEUMATIC HANDHELD SCREWDRIVER BIT COMPATIBILITY: 1/4" AIR INLET: NIPPLE, 1/4" MANUALLY ACTUATED DESIGN: STRAIGHT SERIES: MINIMAT ULTRA COLOR: BLACK HIGH-PRECISION REVERSIBLE.

[KYOCERA 8801467] GMR GRADE KW10 2.2MM WIDTH CARBIDE GROOVING INSERT (32) - MANUFACTURER: KYOCERA MODEL: 8801467 CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THESE CARBIDE INSERTS WERE VERY SLIGHTLY USED AND CAREFULLY INSPECTED FOR FLAWS. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THESE CARBIDE INSERTS WERE VERY SLIGHTLY USED AND CAREFULLY INSPECTED FOR FLAWS. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (32) KYOCERA 8801467 GMR GRADE KW10 2.2MM WIDTH CARBIDE GROOVING INSERT SPECIFICATIONS: MANUFACTURER: KYOCERA MODEL: 8801467 DESCRIPTION: GMR GRADE KW10 2.2MM WIDTH CARBIDE GROOVING INSERT CUTTING WIDTH: 2.20MM (0.0866") MAX DEPTH OF CUT: 1.80MM (0.0708") CUTTING HEIGHT: 4.30MM (0.16930") CORNER RADIUS: 0.17MM (0.00669") INSERT HAND: RIGHT HAND MATERIAL GRADE: C3 MANUFACTURER'S GRADE: KW10 SKU: T05U008 2D-01-02(1) 2LBS - 6IN X 6IN X 4IN

[22 WATT] SPARKS BELTING MR-AD-48-830-30YWGQ MICROROLLERS (2) - MANUFACTURER: SPARKS BELTING MODEL: MR-AD-48-830-30YWGQ MOTOR DRIVEN ROLLER GEARBOX: 30 RATED TORQUE: 8 IN/LB STARTING TORQUE: 20 IN/LB CURRENT RATING: 0.5-2.0 AMPS LINEAR SPEED: VOLTAGE: 24 VDC LENGTH: 830 MM, 32.6" DIAMETER: 48 MM POWER: 22 WATTS. THE MICROROLLERS ARE IN USED CONDITION WITH SOME SCUFFS AND SCRATCHES FROM PREVIOUS USE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. THE MICROROLLERS WERE REMOVED FROM DECOMMISSIONED MACHINES. NO FURTHER TESTING WAS PERFORMED AFTER REMOVAL. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN.

2014 SWEP B25HX16/1P-SN-S INDUSTRIAL HEAT EXCHANGER MAX-WORKING-PRESSURE:1.1 MPA INDUSTRIAL HEAT EXCHANGER CONSTRUCTION: 316/316L STAINLESS STEEL PLATES, COPPER BRAZING LENGTH: 20.75" WIDTH: 4.5" HEIGHT: 3.5" MAX WORKING TEMPERATURE: 123 350 C MAX WORKING PRESSURE: 1.1 0.8 MPA TEST PRESSURE: 2.1 MPA VOLUME: 0.798L PRIMARY, 0.912L SECONDARY MIN WORKING TEMPERATURE: -196C YEAR OF MANUFACTURER: 2014

UDMC 101H-600 6-INCH GREY BUNA APC GASKET (25) MANUFACTURER: UDMC MODEL: 101H-600 CONDITION: NEW OTHER. COMES IN ORIGINAL PACKAGING. THESE GASKETS ARE IN NEW AND UNUSED CONDITION AND COME IN ONE BAG OF 20 AND ANOTHER BAG OF 5 FOR A TOTAL OF 25 GASKETS. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (25) UDMC 101H-600 6-INCH GREY BUNA APC GASKET SPECIFICATIONS: MANUFACTURER: UDMC MODEL: 101H-600 DESCRIPTION: GREY BUNA APC GASKET 6" SKU: U09H015 2J-04-02(1) 4LBS - 10IN X 10IN X 6IN

[OIL COOLER] OILTECH LAC-033-6-A-50-000-0-0 OIL COOLER AIR 4-HP 3-PH 60-HZ STANDARD 460V LAC - MANUFACTURER: LAC MODEL: LAC-033-6-A-50-000-0-0 CONDITION: USED. THIS ITEM COMES IN NON-ORIGINAL PACKAGING. IT HAS SCUFFS AND SCRATCHES FROM NORMAL USE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: WHEN POWER WAS APPLIED, THIS ITEM RAN VERY SMOOTHLY. IT WAS NOT TESTED UNDER A LOAD. WE RAN THE FAN AND PUMP MOTORS DIRECTLY. THE VALVES AND SENSORS WERE NOT TESTED. NO FURTHER TESTING WAS PERFORMED. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) OILTECH LAC-033-6-A-50-000-0-0 OIL COOLER SPECIFICATIONS: MANUFACTURER: LAC PN: 5826033004 TYPE: LAC-033-6-A-50-000-0-0 COOLER SIZE: 033 NUMBER OF POLES, MOTOR: 6 POLES THERMO CONTACT: 50C COOLER MATRIX: STANDARD MATRIX GUARD: NO GUARD STANDARD ACOUSTIC PRESSURE LEVEL LPA DB(A) 1M*: 74 NO. OF POLES/CAPACITY KW: 6-0.55 PUMP MOTOR: 4 HP 3 PHASE 460VAC 60 HZ FAN MOTOR: 0.65 KW 3 PHASE 460VAC 60 HZ SKU: U08L018 5B-20-04(1) 465LBS - 54IN X 42IN X 52IN

[FLEETGUARD AF25708] H2-GEN-3 20.54" X 11.02" CUMMINS C450 AIR FILTER ELEMENT - MANUFACTURER: FLEETGUARD MODEL: AF25708 AIR FILTER PRIMARY ELEMENT OVERALL HEIGHT: 20.54" OVERALL OUTER DIAMETER: 11.02" INNER DIAMETER: 8.10" COMPATIBLE WITH CUMMINS C450 EQUIVALENTS: FLEETGUARD AF2570800, INLINE FFGAF25708, FFG-AF25708

[GRIPNAIL 44192 DRIVE CYLINDER] FOR MODEL 660 AUTOMATIC FASTENING CENTER - MANUFACTURER: GRIPNAIL FASTENING SYSTEMS MODEL: 44192 CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. ITEM HAS MINOR SCUFFS AND SCRATCHES FROM PREVIOUS USE. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: THIS ITEM HAS NOT BEEN TESTED. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) GRIPNAIL 44192 DRIVE CYLINDER SPECIFICATIONS: MANUFACTURER: GRIPNAIL FASTENING SYSTEMS MODEL: 44192 COMPATIBLE WITH: MODEL 660 FASTENING CENTER SKU: N20M018 1D-16-03(3) 4LBS - 15IN X 12IN X 6IN

1996 FANUC A-0C ROBOCUT CNC WIRE-CUT SUBMERGED EDM WITH 16-WC SERIES NC UNIT ALPHA. USED. FAIR COSMETIC CONDITION WITH USUAL BLEMISHES FROM PRIOR USE (SCUFFS/SCRATCHES/RESIDUES). FEW SPOTS UNDER THE WINDOW IN THE WORK AREA WITH VISIBLE RUST. WETTED PARTS HAVE DARK RESIDUES FROM USE. SYSTEM IN GOOD WORKING CONDITION. DISPLAY WAS REPLACED WITH NEW (OLD STOCK) LCD MODULE INCLUDING BACKLIGHT AND BACKLIGHT DRIVER. NOT TESTED. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) FANUC A-0C EDM (1) 16-WC NC UNIT (1) FLUID UNIT (1) WATER COOLING UNIT (1) WIRE COLLECTION BOX (1) WATER FILTRATION UNIT (1) PENDANT CONTROLLER (4) SPARE WATER FILTERS (1) FANUC ROBOCUT FRC A-0C DATA SHEET (1) B-68794EN/01 ROBOCUT A SERIES A-OC OR A-1C OPERATOR'S MANUAL (1) B-68795EN/01 ROBOCUT A SERIES A-OC OR A-1C MAINTENANCE MANUAL (1) B-68794EN-3/01 AUTOMATIC WIRE FEED MECHANISM OPERATOR'S MANUAL (1) B-65150E/04 AC SERVO MOTOR A SERIES PARAMETER MANUAL (2) B-68796EN/01 ROBOCUT A-0C PARTS MANUAL (1) B-65165E/02 SERVO MOTOR A SERIES MAINTENANCE MANUAL (1) INTELLIGENT EDM GETTING TO KNOW YOUR FANUC WEDM "LEARNING THE BASICS" BOOKLET (1) MISCELLANEOUS SMALL SPARE PARTS. MANUFACTURER: FANUC ROBOT MODEL: A-0C TYPE: A04B-0309-B001 ROBOCUT CNC WIRE-CUT EDM NC UNIT: 16-WC SERIES SUBMERGED TYPE WITH AUTOMATIC WIRE FEED MAXIMUM WORKPIECE DIMENSIONS: 650 X 420 X 170 MM MAXIMUM WORKPIECE WEIGHT: 165 KG TABLE STROKE: 320 X 220 MM Z-AXIS STROKE: 180 MM U AND V AXIS STROKE: 60 X 60 MM MAXIMUM TABLE FEEDRATE: 900 MM/MIN MINIMUM TABLE TRAVEL: 0.00001 MM MAXIMUM TAPER ANGLE: +/- 30O /80 MM RAPID TRAVERSE FEEDRATE: 900 MM/MIN CUTTING FEEDRATE: 0.0001 TO 50 MM/MIN MANUAL FEEDRATE: 100, 200, OR 300 MM/MIN MAXIMUM WORKPIECE THICKNESS: 300 MM MAXIMUM WORKPIECE THICKNESS FOR UNDERWATER WIRE FEED: 100 MM DIELECTRIC FLUID UNIT CAPACITY: 390 L DEMINERALIZED WATER FLUID UINT FILTERING FLOW RATE: 40 L/MIN POWER REQUIREMENT: 208V 3PHASE 50/60HZ 13KVA PLUS COMPRESSED AIR. PART NUMBERS: A04B-0231-B213 FANUC ROBOCUT ALPHA-C SERIES A04B-0309-B001 FANUC ROBOCUT A-0C FANUC SERIES 16-W A04B-0231-C223 PENDANT CONTROLLER A04B-0231-C231 MAGNET UNIT A04B-0231-C217 A16B-1100-0550 A16B-1000-0400 A16B-1000-0390 TOSHIBA VFSX-2037B1Y-A11 TRANSISTOR INVERTER A06B-6081-H101 SERVO AMPLIFIER MODULE A06B-6079-H201 SERVO AMPLIFIER MODULE A06B-6080-H301 SERVO AMPLIFIER MODULE A16B-2203-0090 A16B-1212-0871 A16B-3200-0210 A02B-0222-C091 9.5" LCD/MDI UNIT A16B-2300-0110 FUJITSU N860-3130-T002 KEYBOARD EBBCO HR-930-QC1 A290-8024-V870 VERTICAL WIRE ALIGNMENT BLOCK EBBCO PACKAGE FILTRATION SYSTEM EBBCO HRF-155-LP HURRICANE VESSEL EBBCO EDM-D1-1 D.I. EXCHANGE VESSEL A04D-0309-C003 RELAY PANEL EBARA 32(25)VTP5/15-6.75 PUMP CKD A97L-0201-0585 WATER COOLING UNIT. SKU: X15D005 6-BILR1(1) 9999LBS - 999IN X 999IN X 999IN

[BLICKLE] LOCKING SWIVEL TYPE HEAVY-DUTY ROLLING CART CASTER WHEELS SWIVEL TYPE LOCKING 125X25 WHEEL DIAMETER: 4.75" WHEEL WIDTH: 1" TOTAL HEIGHT: 6.25" (4) BLICKLE LOCKING SWIVEL CASTER WHEELS WERE REMOVED FROM DECOMMISSIONED MACHINES. THE WHEELS ROLL AND THE SWIVEL BASE WORKS AS INTENDED. NO FURTHER TESTING WAS PERFORMED AFTER REMOVAL.

WICKE V01 STEEL INDUSTRIAL SWIVEL 3.75" ROLLING CASTER WHEELS (4) MANUFACTURER: WICKE MODEL: V01 DESCRIPTION: WICKE V01 STEEL INDUSTRIAL SWIVEL TYPE ROLLING CASTER WHEELS SWIVEL TYPE WHEEL DIAMETER: 3.75" WHEEL WIDTH: 1.50" BASE DIMENSIONS: 4.25" X 3.50" BOLT HOLE WIDTH: 2.50" X 3.25"

(1) PROTO 2635SW 2-3/16" 12-POINT BLACK OXIDE HEAVY-DUTY OFFSET STRIKING WRENCH MANUFACTURER: PROTO MODEL: 2635SW DESCRIPTION: 12-POINT BLACK OXIDE HEAVY-DUTY OFFSET STRIKING WRENCH SIZE: 2-3/16" HEAD DIAMETER: 3-3/8" HEAD THICKNESS: 1-1/2" OFFSET HEIGHT: 2.0" OAL: 13-1/2" WEIGHT: 6.60LBS SKU: U52U017

DARCOR 64-R SERIES 4" RUBBER BALL BEARING SWIVEL CASTERS (4) W/ STOPS (2) - MANUFACTURER: DARCOR MODEL: 64-R INDUSTRIAL CASTER WHEELS SWIVEL ACTUATION: BALL BEARING WHEEL DIAMETER: 4" WHEEL WIDTH: 1.38" WHEEL MATERIAL: RUBBER BASE MATERIAL: STAINLESS STEEL BASE FINISH: CHROME FIXED BASE MOUNTING DIMENSIONS: BASE PLATE-4 1/8" X 2 3/4", MOUNTING HOLES- 3" L X 1.75" MADE IN CANADA

[SOMMER & MACA SOMACA] X-Y 60 X 60 GLASS CUTTER 60"X60" SUCTION SYSTEM 152"-LENGTH. MANUFACTURER: SOMMER & MACA SOMACA, MODEL: X-Y 60 X 60, SN: 63613, CALIBRATION NOT REQUIRED, BLACK TABLE DIMS: 60" X 60", OVERALL TRACK LENGTH: 152" APPROX., MOVE TABLE: CHAIN, GLASS/TABLE SUCTION SYSTEM(SMALL HOLES IN BLACK TABLE). S/N: 63613

[GREY PNEUMATIC GP] 6076R 2-3/8-INCH 6-POINT 1-1/2-INCH DRIVE STANDARD IMPACT SOCKET 6.75LBS. CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THIS SOCKET HAS SOME DINGS, SCUFFS, AND SCRATCHES, ALONG WITH SOME SPOTS OF RUST AND OTHER MARKINGS EVIDENT FROM NORMAL USE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS SOCKET WAS REMOVED FROM AN ACTIVE WORKING ENVIRONMENT AND WAS NOT TESTED SUBSEQUENT TO ITS REMOVAL. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) GP 6076R 2-3/8-INCH 6-POINT 1-1/2-INCH DRIVE STANDARD IMPACT SOCKET 6.75LBS SPECIFICATIONS: MANUFACTURER: GREY PNEUMATIC GP MODEL: 6076R DESCRIPTION: 1-1/2" DRIVE 6-POINT STANDARD IMPACT SOCKET SIZE: 2-3/8" SOCKET DIAMETER: 3.70" DRIVE DIAMETER: 3.39" LENGTH: 3.74" WEIGHT: 6.75LBS SKU: U46U032 2D-01-04(1) 9LBS - 7IN X 7IN X 5IN

MATE PUNCH & DIE PRESS BRAKE TOOLING ATTACHMENT 40MM MIXED(8) PUNCH & DIE PRESS BRAKE TOOLING ATTACHMENTS ASSORTED PUNCH & DIE ATTACHMENTS FOR PRESS BRAKE TOOLING SYSTEMS CONSTRUCTION MATERIAL: STAINLESS STEEL ALL ROUND BOTTOM PRESS DIAMETER: 40MM ALL ROUND BOTTOM PRESS HIGHT: 13MM THREAD SIZE: 5/16 - 18 (1) .156 X .312 + .010 W/ .160 X .312 (1) .315 + .012 W/ .375 (1) .250 + .012 W/ .250 (1) .156 X .250 + .010 W/ .156 X .250 (1) .187 X .312 + .024 SLUG FREE W/ .187 X .312 (1) .141 + .018 SLUG FREE W/ .140 (1) .187 X .500 + .018 W/ .171 X .500 (1) .375 X .500 + .018 W/ .375 X .500 SKU: U04H012

[USED] WERMA 840 080 00 SIGNALTECHNIK 12-230VAC/DC TERMINAL ELEMENT W/(2)SIGNAL LIGHTS - MANUFACTURER: WERMA MODEL: 840 080 00 SIGNALTECHNIK TERMINAL ELEMENT WITH (2) SIGNAL LIGHTS LIGHT COLORS: ORANGE, GREEN VOLTAGE: 12-30V AC/DC DIAMETER: 70MM DEGREE OF PROTECTION: IP 54 TUBE MOUNTING SCREW TERMINAL CONNECTION WORKING TEMPERATURE : -20C TO 50C TOTAL HEIGHT: 9.5" UL LISTED COMPONENT

[COOPER TOOLS] H10RD12TS PNEUMATIC STRAIGHT 1/4" AIR LEVER START SCREWDRIVER/NUTRUNNER - MANUFACTURER: COOPER TOOLS MODEL: H10RD12TS CONDITION: USED. COMES IN NON ORIGINAL PACKAGING. THIS SCREWDRIVER IS IN GOOD CONDITION WITH SOME BLEMISHES AND SCRATCHES FROM PREVIOUS USE, BUT IS IN OVERALL GOOD CONDITION. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: OUR TESTS INCLUDED PLUGGING IN THE SCREWDRIVER INTO AN AIR LINE HOSE. THE SCREWDRIVER WORKED GREAT IN THE FORWARD POSITION WHEN LEVER WAS PRESSED WHILE HOLDING DOWN THE CHUCK. REVERSE WORKED WITH NO PROBLEMS WHEN REVERSE BUTTON WAS PRESSED DOWN WHILE HOLDING DOWN THE LEVER. NO FURTHER TESTING WAS PERFORMED. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) COOPER TOOLS H10RD12TS AIR PNEUMATIC STRAIGHT SCREWDRIVER/NUTRUNNER SPECIFICATIONS: MANUFACTURER: COOPER TOOLS MODEL: H10RD12TS 1/4" HEX DRIVE 1200 RPM STRAIGHT PUSH TO START PUSH BUTTON REVERSE SKU: Q12U002 1E-02-02(3) 3LBS - 14IN X 8IN X 4IN

[URYU US-40TPB] PNEUMATIC PUSH TO START PISTOL GRIP 1/4" HEX SCREWDRIVER/NUTRUNNER - MANUFACTURER: URYU MODEL: US-40TPB CONDITION: USED. COMES IN NON ORIGINAL PACKAGING. THIS AIR TOOL IS IN GOOD CONDITION WITH SOME LIGHT WEAR FROM PREVIOUS USE. COMES WITH AN EXTENDED 1/4" BIT ATTACHMENT. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: OUR TESTS INCLUDED PLUGGING IN THE AIR TOOL INTO AN AIR LINE HOSE. WHEN CHUCK WAS PRESSED DOWN, FORWARD POSITION WORKED GREAT WITH NO ISSUES AS WELL AS REVERSE MODE WHEN REVERSE BUTTON WAS PRESSED. NO FURTHER TESTING WAS PERFORMED. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) AIMCO-URYU US-40TPB PNEUMATIC PISTOL GRIP SCREWDRIVER/NUTRUNNER SPECIFICATIONS: MANUFACTURER: AIMCO-URYU MODEL: US-40TPB 1/4" HEX PISTOL GRIP STYLE PUSH TO START REVERSE PUSH BUTTON REVERSIBLE SKU: Q14U001 1B-07-02(1) 3LBS - 12IN X 12IN X 6IN

(1) WRIGHT TOOL 5846 1-7/16-INCH 6-POINT #5 SPLINE DRIVE IMPACT SOCKET 4140 ALLOY SPECIFICATIONS: MANUFACTURER: WRIGHT TOOL MODEL: 5846 DESCRIPTION: 6-POINT #5 SPLINE DRIVE IMPACT SOCKET SIZE: 1-7/16" LENGTH: 3-1/16" SOCKET DIAMETER: 2-/16" DRIVE DIAMETER: 2-3/8" MATERIAL: 4140 ALLOY STEEL WEIGHT: 2.45LB

2006 SWEP B25HX16/1P-SN-S INDUSTRIAL HEAT EXCHANGER MAX-WORKING-PRESSURE:1.2MPA INDUSTRIAL HEAT EXCHANGER MAX FLOW: 9 M CUBED/HOUR, 36.63 GPM CHANNEL VOLUME: 0.114/0.114 DM CUBED CONSTRUCTION: 316/316L STAINLESS STEEL PLATES, COPPER BRAZING LENGTH: 20.75" WIDTH: 4.5" HEIGHT: 2" MAX WORKING TEMPERATURE: 200 C MAX WORKING PRESSURE: 1.2 MPA TEST PRESSURE: 2.4 MPA VOLUME: 0.798L PRIMARY, 0.912L SECONDARY YEAR OF MANUFACTURER: 2006

[WRIGHT TOOL 5864] WRIGHT TOOL 5864 2-INCH 6-POINT #SPLINE STANDARD IMPACT SOCKET 3.30LBS MANUFACTURER: WRIGHT TOOL MODEL: 5864 DESCRIPTION: #5 SPLINE DRIVE 6-POINT STANDARD IMPACT SOCKET SIZE: 2.00" SOCKET DIAMETER: 3-1/8" DRIVE DIAMETER: 2-1/2" LENGTH: 3-1/16" WEIGHT: 3.30LBS

(1) INGERSOLL RAND 2171P 1" DRIVE PNEUMATIC IMPACT WRENCH 6000RPM 1250 FT/LB TORQUE. MANUFACTURER: INGERSOLL RAND MODEL: 2171P PNEUMATIC IMPACT WRENCH SPEED: 6000 RPM TORQUE: 1250 FT/LB, 1694.78 N/M AIR CONSUMPTION: 46 CFM, 1302.72 LPM INLET: 3/8" NPT IMPACTS PER MINUTE: 1025

VAT 20046-XE14-AAA1 THROTTLE GATE VALVE ASSEMBLY 7-3/4" INNER DIAMETER SWISS. MANUFACTURER: VAT, MODEL: 20046-XE14-AAA1. CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THE THROTTLE VALVE ASSEMBLY IS IN GOOD, USED CONDITION WITH SOME SCUFFS AND SCRATCHES FROM THE PREVIOUS INSTALLATION. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THE VALVE WAS REMOVED FROM A DECOMMISSIONED ENVIRONMENT. NO FURTHER TESTING WAS PERFORMED AFTER REMOVAL. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) VAT 20046-XE14-AAA1 THROTTLE VALVE ASSEMBLY. SPECIFICATIONS: MANUFACTURER: VAT, MODEL: 20046-XE14-AAA1 THROTTLE VALVE ASSEMBLY, INLETS: 2, INDICATOR: OPEN/CLOSE, INNER DIAMETER: 7.75", OUTER DIAMETER: 11.75", MADE IN SWITZERLAND. SKU: T38B006. 2D-02-02(1) 82LBS - 25IN X 19IN X 12IN

SC 5" X 1.25" STRAIGHT / SWIVEL ROLLING CASTER WHEELS (4) - MANUFACTURER: SC MODEL: DOES NOT APPLY CONDITION: NEW OTHER. COMES IN NON-ORIGINAL PACKAGING. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (2) SC 5" STRAIGHT TYPE INDUSTRIAL ROLLING CASTER WHEELS (2) SC 5" SWIVEL TYPE INDUSTRIAL ROLLING CASTER WHEELS SPECIFICATIONS: MANUFACTURER: SC MODEL: DOES NOT APPLY DESCRIPTION: SC 5" TWO SWIVEL TYPE TWO STRAIGHT INDUSTRIAL ROLLING CASTER WHEELS TWO SWIVEL TYPE TWO STRAIGHT WHEEL DIAMETER: 5" WHEEL WIDTH: 1.25" TOTAL HEIGHT: 6" BASE DIMENSIONS: 3.50" X 2.50" BOLT HOLE WIDTH: 2.75" X 1.75" SKU: W24G017 5A-02-02(3) 11LBS - 12IN X 12IN X 12IN

ALBION R4 LARGE LOCKING STEEL SWIVEL 4" X 2" ROLLING CASTER WHEELS (4) MANUFACTURER: ALBION MODEL: R4 CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THE CASTERS ARE IN USED CONDITION WITH SCUFFS, SCRATCHES, AND RESIDUE FROM PREVIOUS USE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THE CASTERS WERE REMOVED FROM DECOMMISSIONED MACHINES. THE WHEELS ROLL AND THE SWIVEL BASE WORKS AS INTENDED. NO FURTHER TESTING WAS PERFORMED AFTER REMOVAL. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (4) ALBION R4 LARGE LOCKING STEEL SWIVEL TYPE ROLLING CASTER WHEELS SPECIFICATIONS: MANUFACTURER: ALBION MODEL: R4 DESCRIPTION: ALBION LARGE LOCKING STEEL SWIVEL TYPE ROLLING CASTER WHEELS SWIVEL TYPE LARGE LOCKING FOOT LEVER WHEEL DIAMETER: 4" WHEEL WIDTH: 2" TOTAL HEIGHT: 5.25" BASE DIMENSIONS: 4.50" X 4" BOLT HOLE WIDTH: 3.50" X 3"

VIBRATION PLATFORM 13.5" CONCRETE CASTING MOLD SHAKER VIBRATING STAINLESS TABLE - MANUFACTURER: UNBRANDED MODEL: DOES NOT APPLY CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THIS VIBRATING TABLE IS IN GOOD COSMETIC CONDITION WITH MINOR SCUFFS AND SCRATCHES FROM REGULAR USE BUT NOTHING THAT WOULD AFFECT FUNCTIONALITY. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS VIBRATING TABLE HAD 110V POWER APPLIED, THE MOTOR IMMEDIATELY ENGAGED, AND THE TABLE OSCILLATED. NO FURTHER TESTING WAS PERFORMED. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) SMALL VIBRATION TEST PLATFORM CONCRETE VIBRATING TABLE SPECIFICATIONS: MANUFACTURER: UNKNOWN MODEL: DOES NOT APPLY DESCRIPTION: CONCRETE VIBRATING TABLE MATERIAL: STAINLESS STEEL TABLE WIDTH: 13.5" TABLE DEPTH: 13.5" TOTAL HEIGHT: 8.5" MOTOR: MODEL: CS-0.28 110V 1PH 60 HZ 3600RPM 50W 0.35A

[20B002] ULTRAMITRE VG3530-6 MITER SAW 350MM BLADES 100T CARBIDE TIPPED 30MM ARBOR. MANUFACTURER: ULTRAMITRE MODEL: VG3530-6. COMES IN NON-ORIGINAL PACKAGING. THE BLADES ARRE IN GOOD, USED CONDITION WITH SOME MINOR SCUFFS FROM PREVIOUS USE. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: THE BLADES WERE REMOVED FROM DECOMMISSIONED MACHINES. NO FURTHER TESTING WAS PERFORMED AFTER REMOVAL. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (2) ULTRAMITRE VG3530-6 350MM REPLACEMENT MITER SAW BLADES WOOD,PLASTIC SPECIFICATIONS: MANUFACTURER: ULTRAMITRE MODEL: VG3530-6 MITER SAW BLADE MATERIAL: CARBIDE STEEL DIAMETER: 350MM ARBOR: 30MM BORE TEETH: 100 CUTTING PATTERN: -6 ULTRAMITRE BLADES WITH THIS TOOTH PATTERN PRODUCE EXCELLENT RESULTS ON: HARD AND SOFT WOODS LACQUERED, STAINED OR PAINTED FINISHES COMPO OR ORNATE FINISHES FOIL, PAPER, PLASTIC OR SENSITIVE FINISHES. CHOOSE A -6 BLADE TYPE FOR WOOD AND IN SHORT-RUN QUANTITIES OF STYRENE. NOT FOR USE IN METAL APPLICATIONS. SKU: Y20B002 1C-03-01(2) 15LBS - 16IN X 16IN X 7IN

MARKAL 86733 THERMOMELT HEAT STICK TEMP 400-F 204-C (6) - MANUFACTURER: MARKAL MODEL: 86733 CONDITION: NEW OTHER. THESE HEAT STICKS ARE IN A NEW AND UNUSED COSMETIC CONDITION AND COME IN THE ORIGINAL MARKAL BOX THAT CONTAINS 6 STICKS. THE BOX SHOWS SOME MINOR WEAR FROM STORAGE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (6) MARKAL 86733 THERMOMELT HEAT STICK TEMP 400-F 204-C SPECIFICATIONS: MANUFACTURER: MARKAL MODEL: 86733 DESCRIPTION: THERMOMELT HEAT STICK TEMP 400-F 204-C THE BIG STICK! SKU: V03H024 2F-03-02(1) 2LBS - 8IN X 8IN X 4IN

INTERROLL EC100 22" MOTORIZED POWERED CONVEYOR ROLLER 1.9" 24VDC 36:1 RATIO. MANUFACTURER: INTERROLL MODEL: EC100. THIS CONVEYOR ROLLER IS IN USED CONDITION WITH SCUFFS AND SCRATCHES FROM PREVIOUS USE. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). THIS CONVEYOR ROLLER WAS REMOVED FROM A WORKING ENVIRONMENT AND HAS NOT BEEN TESTED SINCE ITS REMOVAL. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) INTERROLL EC100 22" MOTORIZED POWER CONVEYOR ROLLER 1.9" 24VDC 36:1 RATIO. SPECIFICATIONS: MANUFACTURER: INTERROLL MODEL: EC100. POWERED CONVEYOR ROLLER DIAMETER 1.9" NOMINAL VOLTAGE 22-28 VDC NO LOAD CURRENT 0.6 A MAX. CONTINUOUS CURRENT 1.8 A MAX. START CURRENT 4.1 A MECHANICAL PERFORMANCE 18 W DRIVE EFFICIENCY 46% NOISE LEVEL 55 DB(A) MINIMUM ROLLER LENGTH 8.85"-12.64" (DEPENDING ON APPLICATION) GEAR RATIO: 36:1 SPEED RANGE FT/MIN: 29-88 NOMINAL TORQUE INCH-LB: 10.4 PEAK TORQUE INCH-LB: 33.6

2008 CONVEYOR TECHNOLOGIES CTI CCS-1M-1-TB-SC-1-SECTION PCB CONVEYOR WORKSTATION. THIS CONVEYOR IS IN FAIR COSMETIC CONDITION WITH LOTS OF MINOR SCUFFS/SCRATCHES AND ADHESIVE LABEL RESIDUES FROM PRIOR USE. THERE ARE LOTS OF FASTENERS AND LARGER PARTS WITH VISIBLE CORROSION. LARGE AREAS OF PAINT ARE MISSING WITH CORROSION SHOWING THROUGH. WHAT ISN'T SCRATCHED OR CORRODED HAS RESIDUE FROM GRAY RTV RUBBER STUCK ON. THE AUTO/MANUAL SWITCH IS MISSING. THIS CONVEYOR IS IN PARTIAL WORKING CONDITION. THE MOTOR RUNS FOR A WHILE AND STOPS, UNTIL SOMETHING OBSTRUCTS THE PRODUCT SENSOR AND THE BELTS START MOVING AGAIN. THE EMERGENCY STOP WORKS. WE CAN'T TEST THE AUTO/MANUAL FUNCTION WITHOUT A SWITCH. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) CTI CCS-1M-1-TB-SC-2552 CONVEYOR SPECIFICATIONS: MANUFACTURER: CONVEYOR TECHNOLOGIES MODEL: CCS-1M-1-TB-SC-2552 1-SECTION CONVEYOR OPEN CENTER AUTOMATIC PCB CONVEYOR TRANSPORTS CIRCUIT BOARDS FROM AN UPSTREAM/PREVIOUS MACHINE TO A DOWNSTREAM/NEXT MACHINE CONVEYOR LENGTH: 1.0 METER MINIMUM BOARD SIZE: 2" X 4" MAXIMUM BOARD SIZE: 16" X 18" CONVEYOR HEIGHT: 37.5" (NOMINAL, ADJUSTABLE) CYCLE TIME: 2-3 SECONDS PROCESS ONLY ONE PCB AT A TIME HANDWHEEL-ADJUSTABLE WIDTH WIDTH ADJUSTMENT RANGE: 2" TO 16" AUTO/MANUAL MODES (1) SENSOR FOR PRODUCT DETECTION EMERGENCY STOP BUTTON SMEMA COMPATIBLE COMMUNICATION PORTS POWER REQUIREMENT: 120V 60HZ 1..8A

[TAYLOR-DUNN B2-10] ELECTRIC 36V UTILITY VEHICLE 2400# IN/OUT BATT-CHARGE 2-PASS. CONDITION: USED. THIS ITEM COMES IN NON-ORIGINAL PACKAGING. IT HAS SCUFFS, SCRATCHES, DINGS, DENTS, RIPPED SEATS, AND DIRT RESIDUE IN VARIOUS AREAS AS SEEN IN THE IMAGES. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: WHEN POWER WAS APPLIED, THIS ITEM RAN VERY SMOOTHLY. IT DROVE FORWARD/REVERSE, STOPPED, AND TURNED WITH NO PROBLEMS. THIS VEHICLE DOES COME EQUIPPED WITH A BATTERY CHARGER, AS SEEN, THOUGH IT WAS NOT TESTED. IT DOES COME EQUIPPED WITH AN EMERGENCY/PARKING BRAKE, BUT IT DOESN'T SEEM TO HOLD THAT WELL. IT MAY NEED TO BE ADJUSTED OR REPLACED. WHEN DRIVEN IN FORWARD OR REVERSE THE TOP RED LIGHT AND SIREN ARE CONTINUOUSLY ON. THE HORN DOES NOT WORK. THERE ARE A FEW WIRES DISCONNECTED WE DO NOT KNOW WHAT THEY ARE CONNECTED TO. NO FURTHER TESTING WAS PERFORMED. NOTE: BATTERIES ARE NOT INCLUDED NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) TAYLOR-DUNN B2-10 ELECTRIC 36V UTILITY VEHICLE 2400# IN/OUT BATT-CHARGE 2-PASS + SPECIFICATIONS: MANUFACTURER: TAYLOR-DUNN MODEL: B2-10 VOLTS: 36V (BATTERIES NOT INCLUDED) ELAPSED TIME METER: 3952.5 HRS. FORWARD / REVERSE INDOOR / OUTDOOR 2 PASSENGER VEHICLE WT. LESS BATTERIES: 1383 LBS. MIN/MAX BATTERY WT.: 348/480 LBS RATED CAPACITY: 2400 LBS. BUILT-IN BATTERY CHARGER GE DC MOTOR BACK COMPARTMENT: 43-1/2" X 11" APPROX. FRONT COMPARTMENT: 44" X 12" APPROX. I.D. OVERALL BACK PLATFORM: 43-3/4"W X 75" SKU: X06L004 6-OUTSIDE(1) 1900LBS - 128IN X 53IN X 84IN

TGW 1191604 72"X21" 6' POWERED ROLLER/BELT CONVEYOR 2 DRIVEN SECTIONS INTERROLL. THIS CONVEYOR IS IN FAIR COSMETIC CONDITION. THERE ARE MINOR SCUFFS/SCRATCHES/RESIDUES AND THE REMNANTS OF PAPER ADHESIVE LABELS ON THE OUTSIDE OF THE FRAME. THERE ARE AREAS ON THE FRAME WHERE THE PAINT IS BADLY WORN. THE BELTS ARE DARK/FADED BUT STILL GOOD. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. THIS CONVEYOR IS IN GOOD WORKING CONDITION. WHEN POWER IS APPLIED, THE BELTS TURN UNTIL SOMETHING OBSTRUCTS THE SENSORS. WE SAW THE BELTS RUN IN BOTH DIRECTIONS. THERE IS A REPETITIVE CLICKING NOISE DURING OPERATION; WE ARE NOT SURE IF IT IS NORMAL. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) TGW 1191604 72" POWERED CONVEYOR SPECIFICATIONS: MANUFACTURER: TGW ITEM: 1191604 DESCRIPTION TEXT: BED,ITR-22BF-HORIZ-HB-CZ-FWB-36Z-RH-6'0"-FE60-2MR MOTORIZED ROLLER CONVEYOR WITH BELTS OVER ROLLERS LENGTH: 6 FEET OVERALL, (2) 3' INDIVIDUAL BELTED SECTIONS WIDTH: 21" BELT, 22" INSIDE FRAME, 25.5" OUTSIDE FRAME HEIGHT: 34" TO BELT TOP (ADJUSTABLE) POWER: 24VDC (2) POWERED ROLLERS (2) PRODUCT SENSORS EACH SECTION CAN BE INDIVIDUALLY CONTROLLED, ANY SEGMENT CAN BE MADE A ZERO-PRESSURE ZONE CAN BE MADE TO RUN ON DEMAND FOR LESS NOISE, WEAR, AND ENERGY CONSUMPTION REVERSIBLE LOW VOLTAGE FOR SAFETY SOFT START/STOP IMPARTS LOW G-FORCES TO PRODUCTS VARIABLE SPEED SKU: W33D005 6-BILR1(1) 330LBS - 80IN X 40IN X 44IN

[UNBRANDED] STEEL CONVEYOR DRUM ROLLER PULLEY 34.5CM (13.5") LONG X 24.7CM (9.7") WIDE - MANUFACTURER: UNBRANDED MODEL: DOES NOT APPLY CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THIS ROLLER IS IN FAIR COSMETIC CONDITION WITH MINOR SURFACE RUST ON THE SIDE THAT WAS FACING UP DURING YEARS OF STORAGE. THERE IS A 1MM GROOVE WORN ALL AROUND THAT SHOULD NOT AFFECT FUNCTION. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS ITEM HAS NOT BEEN TESTED BY US. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) BIG ROLLER/PULLEY SPECIFICATIONS: LENGTH: 37CM (34.5CM ON MINOR DIAMETER) MAJOR DIAMETER: 252MM MINOR DIAMETER: 247.6MM LIP: 21MM WIDE SNOUTS: 55.2MM X 139.4MM 56.2MM X 124.5MM STEEL, WELDED CONSTRUCTION 2X THREADED HOLES ONE END MAGNETIC ON ALL PARTS NO TEXT OR NUMBER MARKINGS ANYWHERE SKU: V50D005 5C-14-02(1) 175LBS - 48IN X 40IN X 18IN

TIG STAR T54N14 #8 12.5MM TIG TORCH NOZZLE (50) - MANUFACTURER: TIG STAR MODEL: T54N14 CONDITION: NEW OTHER. THESE NOZZLES ARE IN A NEW AND UNUSED COSMETIC CONDITION AND COME INDIVIDUALLY PACKAGED IN THE ORIGINAL TIG STAR BOX THAT DOES SHOW SOME SIGNS OF SHELF WEAR AND OCCASIONALLY WRITING ON THE OUTSIDE OF THE BOX. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (50) TIG STAR T54N14 #8 12.5MM TIG TORCH NOZZLE <5 PACKS OF 10> SPECIFICATIONS: MANUFACTURER: TIG STAR MODEL: T54N14 DESCRIPTION: TIG TORCH NOZZLE #8 12.5MM ALUMINA GAS LENSE SKU: U51H005 1B-20-02(1) 5LBS - 8IN X 8IN X 7IN

[ALVORD-POLK TOOL VARIOUS CHUCKING REAMER, 00323] [ALVORD-POLK TOOL VARIOUS CHUCKING REAMER, 00316 SIZE: 1/4" LENGTH OF FLUE: 1-1/2"] [ALVORD-POLK TOOL VARIOUS CHUCKING REAMER, 00262 SIZE: 3MM LENGTH OF FLUE: 7/8"] [ALVORD-POLK TOOL VARIOUS CHUCKING REAMER, 00045 SIZE: 7/64" LENGTH OF FLUE: 7/8"]

2009 TRANE ALLEGIANCE 20 5 TON 10 SEER SPLIT AIR CONDITIONER SYSTEM R410A 230V 1PHASE 60HZ. THIS SYSTEM IS USED AND HAS ALL THE USUAL COSMETIC BLEMISHES FROM USE. THE AIR HANDLER HAS RESIDUES INSIDE AND OUT, AS WELL AS CORROSION ON SOME OF THE STEEL PARTS OF THE COILS. THE CONDENSING UNIT HAS SOME BENT FINS ON THE COILS AND OXIDATION ON THE PAINTED FINISH. COPPER LINES ON BOTH UNITS ARE CRIMPED AND BRAZED SHUT. THE MOUNTING TRAYS FOR BOTH ARE NORMAL AMOUNTS OF DIRTY. THIS SYSTEM WAS DECOMMISSIONED FROM WORKING SERVICE. THE REFRIGERANT WAS PUMPED DOWN INTO THE COMPRESSOR AND THE LINES WERE CRIMPED AND SOLDERED SHUT. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) 4A7Z0060A1000AA CONDENSING UNIT (1) 4TEE3C10A1000AA AIR HANDLER (1) AZONE950AC52ZAB THERMOSTAT (1) WATER TRAY FOR AIR HANDLER (1) PLASTIC PAD FOR CONDENSING UNIT SPECIFICATIONS: MANUFACTURER: TRANE U.S. (AMERICAN STANDARD) SPLIT SYSTEM COOLING AIR CONDITIONER/HEATER 5 TON 10 SEER ALLEGIANCE 20 ACCULINK COMMUNICATING UNIT VARIABLE SPEED AIRFLOW, VARIABLE SPEED CONDENSER FAN MANUFACTURED: 2009 CONDENSING UNIT: TRANE MODEL 4A7Z0060A1000AA AMERICAN STANDARD ALLEGIANCE 20 COMPRESSOR (2) DURATION COMPRESSORS DELIVER 50% OR 100% CAPACITY MODULATION ALL ALUMINUM SPINE FIN COIL VARIABLE SPEED ACCULINK SYSTEM, ONLY 2 WIRE CONTROL CONNECTION LOW SOUND WITH ADVANCED FAN SYSTEM AND COMPRESSOR SOUND INSULATOR FAN: 27.6", 1/3HP COMPRESSOR SUMP HEAT 10 SEER BRAZED CONNECTIONS POWER: 200/230V 1PHASE 60HZ 31A AIR HANDLER: TRANE MODEL 4TEE3C10A1000AA COMMUNICATING COMPACT 21" DEPTH FOR EASY INSTALLATION 1HP VARIABLE SPEED ECM MOTOR DIRECT DRIVE BLOWER SOFT START TO REDUCE SOUND AND DRAFTS NONBLEED TXV REFRIGERANT CONTROL POWER: 200-230V 1PHASE 60HZ 7.5FLA REFRIGERANT: R-410A WITH INTERNAL ELECTRIC HEAT MAXIMUM OUTLET AIR TEMPERATURE: 200OF MOTOR INTERNALLY PROTECTED SUITABLE FOR MANUFACTURED HOME USE 20X25X1 THROWAWAY FILTER SLOT WITH EASY ACCESS DOOR CAN BE CONVERTED FOR HORIZONTAL LEFT/RIGHT, UPFLOW/DOWNFLOW THERMOSTAT: AZONE950AC52ZAB COMFORTLINK II 7" COLOR TOUCHSCREEN COMMUNICATING WALL MOUNT STAGES: 5 HEAT/2 COOL PROGRAMMABLE WITH SUB-BASE MOUNTING/WIRING BRACKET

ADELCO ECOTEX ET180G-XP-3 TEXTILE CONVEYOR DRIER

1-1/16 HSS HEX SHANK SPIRAL FLUTE BRIDGE CONSTRUCTION REAMER 7-1/2-INCH. MANUFACTURER: UNBRANDED MODEL: 1-1/16 HSS DESCRIPTION: HSS HEX NUT SPIRAL FLUTE BRIDGE/CONSTRUCTION REAMER SIZE: 1-1/16" LENGTH: 7-1/2" FLUTES: 5 WEIGHT: 1.30LBS

[BOSTON GEAR F726-60KZ-B5-J1-RO] SPEED REDUCER RATIO:60 56C TORQ:1385LBIN MANUFACTURER: BOSTON GEAR CAT #: F726-60KZ-B5-J1-RO 700 SERIES ITEM CODE: D03816 RATIO: 60 INPUT HP: .89 OUTPUT TORQUE: 1385 LB.IN. SHAFT DIAMETER: 1-1/8" FLANGE: O.D.: 5-13/16" SHAFT HOLE: 5/8" NEMA MOUNTING: 56C 46LBS - 20IN X 20IN X 12IN. THIS ITEM COMES IN NON-ORIGINAL PACKAGING. IT HAS SCUFFS AND SCRATCHES FROM NORMAL USE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. THIS ITEM WAS NOT TESTED BY US SINCE WE DO NOT HAVE THE PROPER RESOURCES, THOUGH MANUALLY WE CAN SPIN IT WITH NO PROBLEMS. NOTE: THE SIDE OUTPUT SHAFT SEAL WAS REPLACED AS SEEN IN THE IMAGES. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN.

EAZYPOWER 79927 4" LENGTH #1 PHILLIPS ISOMAX 1/4" HEX SCREW BITS. MANUFACTURER: EAZYPOWER MODEL: 79927 LENGTH: 4" TYPE: #1 PHILLIPS 1/4" HEX QUANTITY: (65) 2-PACKS (130 TOTAL BITS) SKU: Q17M002 1D-12-04(1) 8LBS - 16IN X 9IN X 8IN

(4) INDUSTRIAL HEAVY-DUTY LOCKING SWIVEL TYPE 3" ROLLING CASTER WHEELS WHEEL DIAMETER: 3" WHEEL WIDTH: 1.25" BASE DIMENSIONS: 4.25" TOTAL HEIGHT: 4" BOLT HOLE WIDTH: 3.50" X 2.50"

[40] TIG STAR TS53N88L #10L LONG CERAMIC NOZZLE 5/8" (16MM). MANUFACTURER: TIG STAR. MODEL: TS53N88L. DESCRIPTION: CERAMIC TIG WELD CUP NOZZLE #10L LONG 5/8" 16MM. SKU: V02H014. WEIGHT: 7LBS. DIMENSIONS: 10IN X 10IN X 7IN.

(1) WRIGHT TOOL 1976 2-3/8" 12-POINT OFFSET HANDLE STRIKING FACE BOX WRENCH 7.60LBS SPECIFICATIONS: MANUFACTURER: WRIGHT TOOL MODEL: 1976 DESCRIPTION: 12-POINT OFFSET HANDLE STRIKING FACE BOX WRENCH SIZE: 2-3/8" HEAD DIAMETER: 3-23/32" HEAD THICKNESS: 1-1/2" OAL: 14" OFFSET: 45-DEGREES WEIGHT: 7.60LBS

[INGERSOLL RAND] IR 2-TON 20' MANUAL HAND CHAIN HOIST 4000-LBS 20'-CHAIN-LENGTH MANUFACTURER: INGERSOLL RAND IR MODEL: UNKNOWN CHAIN LENGTH: 20' CAPACITY: 2 TON OPERATION: MANUAL HAND TYPE: CHAIN HOIST SKU: W51L008 5C-02-02(1) 68LBS - 22IN X 14IN X 12IN

GSI 8100 3-AXIS CARTESIAN LINEAR TRANSLATION STAGE 62CM/52CM/5CM +MOTORS, DRIVES. MANUFACTURER: GENERAL SCANNING GSI. CONDITION: USED. THIS LOT IS IN GOOD OVERALL COSMETIC CONDITION WITH LOTS OF DUSTY/GREASY RESIDUES ESPECIALLY ON THE BALLSCREWS AND IN THEIR GREASE-CATCHING TRAYS. THE BUMPERS ON THE Z-AXIS ARE CRACKED AND FALLING APART. THERE ARE A FEW EXTRA CABLES IN THE CABLE MANAGEMENT SYSTEM IN CASE YOU WANTED TO USE THEM. THERE WAS A LINEAR ENCODER ON THE Z AXIS BUT IT IS BROKEN AND MOSTLY MISSING. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS WAS REMOVED FROM A DECOMMISSIONED GSI LUMONICS 8100 INSPECTION SYSTEM 3D SCANNER AND NOT TESTED UNDER POWER. THE SCREWS FOR THE TOP AND MIDDLE AXES CAN BE TURNED WITH MODERATE FINGERTIP PRESSURE DIRECTLY ON THE SCREWS. THE Z-AXIS MOVES EASILY WHEN THE KNOB IS TURNED. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) GSI 3-AXIS LINEAR TRANSLATION STAGE (1) MOTOR DRIVE/CIRCUIT BOARDS BOX (1) SET OF DRAWINGS INCLUDING SCHEMATICS FOR THE STAGE. SPECIFICATIONS: MANUFACTURER: GENERAL SCANNING/VIEW ENGINEERING. 3-AXIS CARTESIAN MOTION TRANSLATION STAGE. HORIZONTAL TRAVEL: 62CM AND 52CM. VERTICAL TRAVEL: 5CM. LINEAR MOTION GUIDES: NSK LY20 RECIRCULATING BALL BEARING TYPE. GUIDEWAY LENGTHS: 92CM MIDDLE, 76CM TOP AXIS. 4 BEARING BLOCKS PER AXIS. STEEL FRAME WITH BLACK GRANITE MOUNTING BLOCKS FOR LONGEST AXIS. Z STAGE MADE BY SCHILLING INDUSTRIES. MOTORIZED POSITION ADJUSTMENT ON X AND Y AXES. MOTORIZED OR MANUAL ADJUSTMENT OF Z-AXIS. BALLSCREW DRIVE FOR ALL AXES. OPTICAL LIMIT SWITCHES. MAIN MOTORS: GLENTEK GMR2325-16. RATED SPEED: 6000RPM. TACHOMETER: 7V/1000RPM. RSF ELEKTRONIK MSA 6701 LINEAR ENCODERS, ML 620MM AND 520MM ON LONG AXES. GLENTEK GA365-1 MOTOR DRIVES. VISIBLE PCB MODEL: VIEW ENGINEERING ENERGY CONVERSION UNIT 2109385-507. SERVO AMP/MOTORS/TACHOMETER/SCALE INTERFACE BOARD HAS CONNECTORS TO MATE AXIS CABLES. SKU: T46D012 5A-22-03(1). 560LBS - 58IN X 52IN X 31IN.

PROCI STEEL RED WHEEL SWIVEL 4" ROLLING CASTER WHEELS (4) - MANUFACTURER: PROCI MODEL: DOES NOT APPLY CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THE CASTERS ARE IN USED CONDITION WITH SCUFFS, SCRATCHES, AND RESIDUE FROM PREVIOUS USE. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: THE CASTERS WERE REMOVED FROM DECOMMISSIONED MACHINES. THE WHEELS ROLL AND THE SWIVEL BASE WORKS AS INTENDED. NO FURTHER TESTING WAS PERFORMED AFTER REMOVAL. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (4) PROCI STEEL INDUSTRIAL RED WHEEL SWIVEL TYPE ROLLING CASTER WHEELS SPECIFICATIONS: MANUFACTURER: PROCI MODEL: DOES NOT APPLY DESCRIPTION: PROCI STEEL INDUSTRIAL RED WHEEL ROLLING CASTER WHEELS SWIVEL TYPE WHEEL DIAMETER: 4" WHEEL WIDTH: 1.25" TOTAL HEIGHT: 5" BASE DIMENSIONS: 3.75" X 2.50" BOLT HOLE WIDTH: 1.75" X 3"

ORION FANS OA180APL-11-3-TB 7.1"X7.1"X2.6" THERMAL MANAGEMENT FAN 115V 1650RPM SPECIFICATIONS: MANUFACTURER: ORION FANS MODEL: OA180APL-11-3-TB THERMAL MANAGEMENT AC FAN VOLTAGE: 115V TOTAL DIMENSIONS: 7,1" X 7.1" X 2.6" SPEED: 1650 RPM AIRFLOW: 210 CFM NOISE: 40 DB MAX STATIC PRESSURE: 0.43 TYPE: DUAL BALL BEARING OUTPUT: 38 WATTS OPERATING TEMPERATURE: -20 TO 80C