Industrial Electronic Manufacturing Process Equipment Parts Tools Day 3 of 3 day event

[WILLIAMS] 6M-1240 40MM 12-POINT 3/4-INCH DRIVE SHALLOW IMPACT SOCKET 1.50LBS MANUFACTURER: WILLIAMS MODEL: 6M-1240 DESCRIPTION: 12-POINT 3/4-INCH DRIVE SHALLOW IMPACT SOCKET SIZE: 40MM SOCKET DIAMETER: 2-3/8" DRIVE DIAMETER: 1-3/4" LENGTH: 2-1/2" WEIGHT: 1.50LBS

(4) INDUSTRIAL TWO LOCKING TWO ROLLING SWIVEL 5" SHELVING CASTER WHEELS. SWIVEL TYPE WHEEL DIAMETER: 5" WHEEL WIDTH: 1.25" TOTAL HEIGHT 8.50" STEM WIDTH: 1". REMOVED FROM DECOMMISSIONED MACHINES. THE WHEELS ROLL AND THE SWIVEL BASE WORKS AS INTENDED.

RKC INSTRUMENTS INC. REX-B875-CS1 INDUSTRIAL TEMPERATURE CONTROLLER 0-200VAC. MANUFACTURER: RKC INSTRUMENTS MODEL: REX-B875-CS1. THE UNIT IS IN VERY GOOD, LIGHTLY USED CONDITION WITH SOME MINOR SCUFFS FROM PREVIOUS INSTALLATION. THE UNIT WAS REMOVED FROM A DECOMMISSIONED MACHINE. NO TESTING WAS PERFORMED. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) RKC INSTRUMENTS INC. REX-B875-CS1 0-200VAC INDUSTRIAL TEMPERATURE CONTROLLER. SPECIFICATIONS: MANUFACTURER: RKC INSTRUMENTS INC. MODEL: REX-B875-CS1 INDUSTRIAL TEMPERATURE CONTROLLER MODULE SUPPLY VOLTAGE: 24 VDC CURRENT: 0.15A SUPPLY INPUT: 0.00 TO 500.00 PT100 OUTPUT VOLTAGE: 0-200 VAC DIMENSIONS: 7.5" X 5" X 3" MOUNTING: BOTTOM FRAME MADE IN JAPAN.

[UNBRANDED] [DOES NOT APPLY] INDUSTRIAL GRANITE MACHINE BLOCK/SURFACE PLATE 12.25" X 11.5" X 4"H ANGLED SIDE - MANUFACTURER: UNBRANDED MODEL: DOES NOT APPLY CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THE SURFACE PLATE WAS REMOVED FROM A DECOMMISSIONED MACHINE. WE ARE NOT SURE WHAT GRADE THE SURFACE IS. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THE BLOCK WAS REMOVED FROM A DECOMMISSIONED ENVIRONMENT. THERE ARE NO STRUCTURAL CRACKS ON THE BLOCK. NO FURTHER TESTING WAS PERFORMED AFTER REMOVAL. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) INDUSTRIAL GRANITE MACHINE BLOCK/SURFACE PLATE 12.25"LX11.5"WX4"H ANGLED SIDE SPECIFICATIONS: MANUFACTURER: UNBRANDED MODEL: DOES NOT APPLY INDUSTRIAL MACHINE SURFACE PLATE MATERIAL: GRANITE LENGTH: 12.25" WIDTH: 11.5" HEIGHT: 4" ~45 DEGREE ANGLED SIDE THREAD DIAMETER: 0.43"

(4) WHEEL MASTER WI-80 ROLL & SET DIECAST LEVELING NYLON WHEEL CASTERS MEDIUM DUTY FINISH: POWDERCOATED, GALVANIZED ZINC TOTAL HEIGHT OF UNIT: 4" WHEEL DIAMETER: 2.48" PLATE DIMENSIONS: 90MM X 90MM X 7MM RECOMMENDED LOAD: 50KG MAX LOAD: 1000KG OPERATING TEMPERATURE: -10 TO 90C

[CAMBRIDGE FILTER] 2T-39516093-Z285-0-NDF ABSOLUTE FILTER II HEPA FILTER 200-220 VAC. VOLTAGE: 200-220 VAC SINGLE FAN EFFICIENCY: 99.999< RATED: 0.91 M CUBED/MIN FLOW OVERALL DIMENSIONS: 17 3/4" X 6 1/4" X 4" FILTER AREA: 10 7/8" X 5 3/8". THE FILTERS ARE IN GOOD, USED CONDITION WITH SOME SCUFFS AND SCRATCHES FROM PREVIOUS USE. THERE IS A MINOR DENT ON THE FILTER SCREEN. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). THE FILTERS WERE REMOVED FROM A DECOMMISSIONED FACILITY. NO FURTHER TESTING WAS PERFORMED AFTER REMOVAL. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. SKU: S16B005 1D-02-01(6) 9LBS - 22IN X 15IN X 9IN

[TY-FLOT TKIT-8496] TC7 TOOL COLLARS & TL6A-SS LOOPS 0.84"-0.96" (10) MANUFACTURER: TY-FLOT MODEL: TKIT-8496 CONDITION: NEW. COMES IN ORIGINAL PACKAGING. THE COMPONENTS ARE UNUSED. THE COMPONENTS WERE REMOVED FROM THE BAG FOR PHOTO AND INSPECTION PURPOSES. NOTES: NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (10) NEW TY-FLOT TKIT-8496 TC7 TOOL COLLARS & TL6A-SS LOOPS 0.84"-0.96" SPECIFICATIONS: MANUFACTURER: TY-FLOT MODEL: TKIT-8496 TOOL COLLAR & LOOP TOOL COLLAR: TC7 LOOPS: TL6A-SS TOOL DIAMETER COMPATIBILITY: 0.72" TO 0.84" MAX TOOL WEIGHT: 3 LBS MATERIAL: PLASTIC SKU: V04B021 2LBS - 8IN X 8IN X 4IN

[12] MARKAL 86841 THERMOMELT HEAT STICK TEMP 600-F 316-C - MANUFACTURER: MARKAL MODEL: 86841. THESE HEAT STICKS ARE IN A NEW AND UNUSED COSMETIC CONDITION AND COME IN THE ORIGINAL MARKAL BOX THAT CONTAINS 12 STICKS. THE BOX SHOWS SOME MINOR WEAR FROM STORAGE. NOTES: NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (12) MARKAL 86841 THERMOMELT HEAT STICK TEMP 600-F 316-C SPECIFICATIONS: MANUFACTURER: MARKAL MODEL: 86841 DESCRIPTION: THERMOMELT HEAT STICK TEMP 600-F 316-C THE BIG STICK! SKU: V03H033 2F-03-02(1) 2LBS - 8IN X 8IN X 4IN

[KENNAMETAL BNEC062S4] GENERAL PURPOSE 1/16" SOLID CARBIDE BIT (2) - MANUFACTURER: KENNAMETAL MODEL: BNEC062S4 CONDITION: NEW OTHER. COMES IN ORIGINAL OPEN-BOX OLD-STOCK PACKAGING. THE LABEL IS A LITTLE TATTERED AND STAINED. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (2) NEW KENNAMETAL BNEC062S4 GENERAL PURPOSE 1/16" SOLID CARBIDE BIT SPECIFICATIONS: MANUFACTURER: KENNAMETAL MODEL: BNEC062S4 DESCRIPTION: GENERAL PURPOSE BALL-NOSE 30-DEGREE HELIX SOLID CARBIDE BIT CUT DIAMETER: 1/16" FLUTE LENGTH: 3/16" SHANK: 1/8" OVERALL LENGTH: 1-1/2" FLUTES: 4 GRADE: KC610M SKU: T49U007 1A-04-05-04(1) 2LBS - 6IN X 4IN X 4IN

[ROACH CONVEYORS GATE CONVEYOR] 24VDC POWER ROLLER GATE CONVEYOR MANUAL-GASSPRING-LIFT CYLINDERS SICK SPECIFICATIONS: MANUFACTURER: ROACH CONVEYORS MODEL: UNKNOWN GATE CONVEYOR 24VDC POWER ROLLERS POWER MODULES: MANUFACTURER: INTERROLL PN: 9006 INPUT: 24VDC ROLLER DIAMETER: 1.9" CONVEYOR WIDTH: 23" I.D. 2 MANUAL-GASSPRING-LIFT CYLINDERS SICK MODULE 2 SECTIONS OF GATE: LENGTH OF LONGER SECTION: 35.5" APPROX. LENGTH OF SHORTER SECTION: 12" APPROX. SKU: W46L005 1E-15-06(1) 210LBS - 54IN X 43IN X 39IN

[HARRINGTON HOISTS & CRANES] M3-612 1.5-TON MANUAL HAND CHAIN HOIST CB015 CHAIN LENGTHS: UNKNOWN CAPACITY: 1.5 TON OPERATION: MANUAL HAND TYPE: CHAIN HOIST OVERLOAD LIMITER. IT HAS SCUFFS, SCRATCHES, DINGS, DENTS, AND SURFACE RUST FROM NORMAL USE. MANUFACTURER: HARRINGTON HOISTS MODEL: M3-612 M3 SERIES CB015 CHAIN LENGTHS: UNKNOWN CAPACITY: 1.5 TON OPERATION: MANUAL HAND TYPE: CHAIN HOIST OVERLOAD LIMITER.

THK KSH-24 ENERGY E-CHAIN WIRE/CABLE CARRIER W/REMOVABLE BRACKET 22" LENGTH: 22" OUTER WIDTH: 1.8" OUTER HEIGHT: 1.35" 19 LINKS TOTAL, REMOVABLE BRACKETS INNER HEIGHT: 0.87" INNER WIDTH: 1.53" COLOR: BLACK, GRAY MATERIAL: HARD PLASTIC MADE IN JAPAN

[MEIDENSHA] [MEIDEN] [UA026/TYPE 856A] INDUSTRIAL CONTROLLER UNIT. MANUFACTURER: MEIDENSHA (MEIDEN). MODEL: UA026/856A. COMPATIBLE WITH WINDOWS 2000 PRO. EMBEDDED PROCESSOR: LEGACY INTEL PENTIUM 1.80GHZ. MEMORY: 1GB DDR 333MHZ. MOTHERBOARD: SINGLE BOARD COMPUTER MEIDEN IZ53Z. CONNECTIVITY: (2) MALE 9-PIN RS232, USB, DVI, ETHERNET. VOLTAGE: 100-240 VAC. FREQUENCY: 50/60 HZ. CURRENT RATING: 3.7 AMPS TO 1.5 AMPS. MODULES: MITSUBISHI Q80BD-J71LP21-25, MEIDEN YY147. UL LISTED COMPONENT. MADE IN JAPAN. SKU: U09B016. WEIGHT: 18LBS. DIMENSIONS: 16IN X 16IN X 10IN.

UNBRANDED DOES NOT APPLY INDUSTRIAL GRANITE MACHINE BLOCK/SURFACE 31.75"L X 4.25" X 4.25" FLAT SURFACE MATERIAL: GRANITE LENGTH: 31.75" WIDTH: 4.25" HEIGHT: 4.25" THE MACHINE SURFACE BLOCK IS IN GOOD, USED CONDITION WITH NO STRUCTURAL CRACKS. THERE ARE SOME MINOR SCUFFS AND SCRATCHES FROM PREVIOUS USE AND INSTALLATION. WE ARE NOT SURE WHAT GRADE THE SURFACE IS. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. THE BLOCK WAS REMOVED FROM A DECOMMISSIONED MACHINE. NO FURTHER TESTING WAS PERFORMED AFTER REMOVAL. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN.

ALLOY PRODUCTS PRESSURE VESSEL

[SIERRA MONITOR CORPORATION] 4101-02 COMBUSTIBLE GAS SENSOR MODULE - MANUFACTURER: SIERRA MONITOR CORP. MODEL: 4101-02 COMBUSTIBLE GAS SENSOR MODULE LOOP TYPE: 3 WIRE LOOP RESISTANCE: 800 OHM WITH 28 VDC, 400 OHMS AT 21 VDC INPUT VOLTAGE DC: 14-30 VDC (20-30 VDC) INPUT CURRENT: 40 MA INPUT POWER MAX: 1.4 W SIGNAL OUTPUT: 4-20 MA DC LINEAR OPERATING PRESSURE: +/-10% VARIATION FROM AMBIENT FULL SCALE: 100% LEL CH4 SENSOR: CATALYTIC SENSOR LIFE: 3 YEARS OPERATING RANGE: -40 TO 75 C RELATIVE HUMIDITY: 10-95%. CONDITION: USED. COMES IN NON ORIGINAL PACKAGING. THE GAS SENSOR IS IN GOOD, LIGHTLY USED CONDITION WITH MINOR BLEMISHES FROM PREVIOUS INSTALLATION. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THE MODULE WAS REMOVED FROM A DECOMMISSIONED ENVIRONMENT. NO FURTHER TESTING WAS PERFORMED AFTER REMOVAL. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) SIERRA MONITOR CORP. 4101-02 COMBUSTIBLE GAS SENSOR MODULE SKU: S07B037 2C-06-03(1) 3LBS - 8IN X 8IN X 7IN

[HILTI HDM 500] MANUAL ADHESIVE EPOXY DISPENSER GUN W/ HIT-CB 500 CARTRIDGE HOLDER - MANUFACTURER: HILTI MODEL: HDM 500 CONDITION: USED. THIS ITEM COMES IN NON-ORIGINAL PACKAGING. IT HAS SCUFFS AND SCRATCHES FROM NORMAL USE. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: THIS ITEM WAS NOT FULLY TESTED SINCE IT WAS NOT TESTED WITH A FULL CARTRIDGE, THOUGH THE SHAFTS MOVE EASILY IN/OUT MANUALLY AND WITH USING THE TRIGGER. NO FURTHER TESTING WAS PERFORMED. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) HILTI HDM 500 MANUAL ADHESIVE EPOXY DISPENSER GUN (1) RED HILTI HIT-CB 500 CARTRIDGE HOLDER SPECIFICATIONS: DISPENSER: MANUFACTURER: HILTI MODEL: HDM 500 CARTRIDGE HOLDER: MANUFACTURER: HILTI MODEL: HIT-CB 500 BLACK SKU: V11L009 2O-08-01(3) 7LBS - 18IN X 12IN X 9IN

(1) SWEP B25HX16/1P-SN-S 3X21.6SPEC/21.6SPEC STAINLESS PLATES HEAT EXCHANGER MANUFACTURER: SWEP MODEL: B25HX16/1P-SN-S 3X21.6 SPEC / 21.6 SPEC ITEM #: 12419-016 DESCRIPTION: INDUSTRIAL HEAT EXCHANGER MAX. WORKING TEMPERATURES: PRIM: 135 400F SEC: 135 400F MAX. WORKING PRESSURE: PRIM: 1.1 145 PSI SEC: 1.1 145 PSI TEST PRESSURE: PRIM: 2.1 303 PSI SEC: 2.1 303 PSI VOLUME: PRIM: 0.798 49.0 IN3 SEC: 0.912 56.0 IN3 ROHS COMPLIANT STAINLESS STEEL 18LBS - 25IN X 8IN X 8IN

[MILWAUKEE] [0729-20] 28V DEEP CUT BAND SAW, MISSING BELT & BATTERY - PARTS - MANUFACTURER: MILWAUKEE MODEL: 0729-20 CONDITION: FOR PARTS OR NOT WORKING. COMES IN NON-ORIGINAL PACKAGING. THE BANDSAW IS IN HEAVILY USED CONDITION WITH SCUFFS, SCRATCHES, AND SOME MINOR DENTS FROM PREVIOUS REGULAR USE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THE SAW WAS REMOVED FROM A DECOMMISSIONED ENVIRONMENT. THE UNIT IS BEING SOLD AS-IS DUE TO THE MISSING BATTERY COMPONENT AS WELL AS THE DRIVE BELT. A PICTURE OF THE DAMAGED DRIVE BELT WAS INCLUDED FOR REFERENCE PURPOSES. THE RUBBER BELT HAS CRACKED AND FALLEN OFF FROM AGE AND REGULAR USE (NOT INCLUDED). NO FURTHER TESTING WAS PERFORMED AFTER REMOVAL. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) AS/IS MILWAUKEE 0729-20 28 VOLT DEEP CUT BAND SAW MISSING BELT, BATTERY SPECIFICATIONS: MANUFACTURER: MILWAUKEE MODEL: 0729-20 DEEP CUT INDUSTRIAL BANDSAW FT/MINUTE: LOW-0 TO 225 RPM, HIGH-0 TO 350 RPM CAPACITY: 4 3/4" ROUND STOCK, 4 3/4" X 4 3/4" RECTANGULAR BLADE: 44 7/8" X 1/2" X 0.020" BATTERY SYSTEM: M28 (NOT INCLUDED) TOTAL LENGTH: 22" DESIGN: WORM GEAR, CHAIN DRIVE LED INDICATOR SKU: X29B006 5A-11-02(1) 20LBS - 28IN X 17IN X 13IN

[AMH ALL AMERICAN HANDLING] [M030] 8 FOOT LIFT MANUAL HAND FALL CHAIN HOIST 3 TON 6000# - MANUFACTURER: AMH ALL AMERICAN HANDLING MODEL: M030 CONDITION: USED. COMES IN NON ORIGINAL PACKAGING. THE HOIST IS IN GOOD CONDITION WITH SOME WEAR AND TEAR FROM PREVIOUS USE. THERE IS SOME RUST RESIDUE ON THE HOIST AS WELL AS ON THE CHAINS. THE HOOKS ARE IN GOOD SHAPE. ON THE TOP HOOK THE SAFETY LATCH IS BROKEN. THE LIFT CHAIN HOOK SAFETY LATCH IS IN GOOD CONDITION. COSMETICS MAY DIFFER SLIGHTLY FROM PICTURES. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: TESTS INCLUDED LIFTING THE HOIST WITH A FORKLIFT, AND ADDING AN 80 POUND WEIGHT ON THE END OF THE LIFT CHAIN HOOK. (FORKLIFT AND WEIGHT NOT INCLUDED) THE HAND CHAIN SMOOTHLY LIFTED AND DESCENDED THE WEIGHT WITH NO ISSUES. GEARS APPEAR TO BE IN GOOD WORKING ORDER. NO FURTHER TESTING WAS PERFORMED. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) AMH 3 TON MANUAL FALL CHAIN HOIST SPECIFICATIONS: MANUFACTURER: AMH (ALL AMERICAN HANDLING) MODEL: M030 CAPACITY: 3 TON LIFT CHAIN: 8 FOOT HAND CHAIN OPENING IS FORMED WITH A RADIUS FOR SMOOTH OPERATION PREMIUM 80 ZINC PLATED ALLOY LOAD CHAIN SEALED BALL BEARINGS ON THE CHAIN WHEEL MAXIMIZE EFFICIENCY AND SERVICEABILITY SELF ADJUSTING DOUBLE PAWL DISC TYPE MECHANICAL LOAD BRAKE INSURES POSITIVE LOAD CONTROL SKU: P51U007 5H-07-03(2) 155LBS - 53IN X 53IN X 59IN

[SYSTEM SENSOR SCW SPECTRALERT WHITE CEILING MOUNT FIRE ALARM STROBE 12/24VDC] - MANUFACTURER: SYSTEM SENSOR MODEL: SCW SPECTRALERT CEILING MOUNT STROBE STROBE DEVICE FOR FIRE ALARM FLASH RATE: 1 FLASH PER SECOND OPERATING TEMPERATURE: -40 TO 151F OPERATING VOLTAGE RANGE: 8 TO 17.5V OR 16 TO 33VDC TERMINAL WIRE GAUGE: 12 TO 18 AWG CEILING-MOUNTED DIMENSIONS: 6.8"D X 2.5"H COLOR: WHITE SELECTABLE STROBE SETTINGS: 15, 15/75, 30, 75, 95, 110, 115CD. INCLUDED: (2) SYSTEM SENSOR SCW SPECTRALERT WHITE CEILING MOUNT FIRE ALARM STROBE 12/24VDC (2) MOUNTING PLATES. CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THE STROBES ARE IN GOOD, USED CONDITION WITH SOME MINOR SCUFFS FROM PREVIOUS USE. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: THE UNITS WERE REMOVED FROM A DECOMMISSIONED FACILITY. 24VDC POWER WAS APPLIED TO THE UNITS AND THE STROBE ILLUMINATED IN 1 SECOND INTERVALS AS INTENDED. NO FURTHER TESTING WAS PERFORMED. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. SKU: Y04B013 5F-17-02(37)

BEST WELDS 4.5" X 5.25" WELDING FILTER PLATE SHADE 11 (15) MANUFACTURER: BEST WELDS MODEL: 932-107-11 CONDITION: NEW OTHER. THESE FILTER PLATES ARE IN NEW AND UNUSED COSMETIC CONDITION AND COME INDIVIDUALLY WRAPPED IN THE ORIGINAL BEST WELDS PLASTIC WRAPPING AND CONTAINER BOX THAT SHOW WEAR FROM STORAGE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (15) BEST WELDS 4.5" X 5.25" WELDING FILTER PLATE SHADE 11 SPECIFICATIONS: MANUFACTURER: BEST WELDS MODEL: 932-107-11 DESCRIPTION: HARDENED GLASS LENS WELDING FILTER PLATE 4.5" X 5.25" SHADE 11 SKU: V05H007 1B-11-02(1) 7LBS - 10IN X 10IN X 6IN

[IGUS 1450.050.075] (2) IGUS 48"L X 2.5"W X 1"H FLEXIBLE WIRE/CABLE CARRIER ENERGY E-CHAINS. MANUFACTURER: IGUS MODEL: 1450.050.075 SPECIFICATIONS: HALF E-TUBES SMALL RADIUS, HIGH STRENGTH ENERGY CHAINS TOTAL LENGTH: 48" WIDTH: 2.5" HEIGHT: 1" COLOR: BLACK BEND RADIUS: 75MM SERIES: E2/000. THE CHAINS ARE IN GOOD, USED CONDITION WITH SOME SCUFFS, SCRATCHES, AND RESIDUE FROM PREVIOUS USE. THE CHAINS ARE MISSING A FEW SNAP-ON PIECES ON THE INSIDE. THE CHAINS BEND WITH NO OBSTRUCTION.

CONVEYOR TECHNOLOGIES .5 METER PCB CONVEYOR

[NEW] DRILL AMERICA KFDRSD 1-5/16 REDUCED SHANK HSS BLACK & GOLD DRILL BIT 3-FLAT. COMES NEW IN ORIGINAL PACKAGING. THE DRILL BIT IS NEW-OLD-STOCK AND THE PACKAGING IS QUITE TATTERED FROM HANDLING AND STORAGE. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. SPECIFICATIONS: MANUFACTURER: DRILL AMERICA MODEL: KFDRSD 1-5/16 DESCRIPTION: REDUCED SHANK HSS BLACK & GOLD DRILL BIT SIZE: 1-5/16" MATERIAL: HIGH-SPEED STEEL FINISH: BLACK AND GOLD FLUTE LENGTH: 3" OVERALL LENGTH: 6" SHANK TYPE: 3-FLAT NUMBER OF FLUTES: 2 POINT TYPE: SPLIT POINT SKU: U50U036 2H-01-01(30) 2LBS - 12IN X 8IN X 4IN

CONVEYOR TECHOLOGIES 1 METER PCB INSPECTION & TAGGING CONVEYOR INCLUDING PC

[AIMCO URYU U-410] PNEUMATIC OIL-PULSE PISTOL GRIP 3/8" HYDRAULIC IMPACT U-WRENCH. MANUFACTURER: AIMCO URYU MODEL: U-410. THE WRENCH IS IN GOOD CONDITION WITH SOME BLEMISHES, PAINT CHIPS, AND SCRATCHES FROM PREVIOUS USE. THE FILTER MAY NEED TO BE REPLACED DUE TO BEING CRACKED AS SHOWN IN PHOTO. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). TESTS INCLUDED PLUGGING IN THE WRENCH TO AN AIR LINE HOSE. THE WRENCH WORKED GREAT IN THE FORWARD POSITION AS WELL AS REVERSE. NO FURTHER TESTING WAS PERFORMED. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) AIMCO URYU U-410 PNEUMATIC PISTOL GRIP WRENCH SPECIFICATIONS: MANUFACTURER: AIMCO URYU MODEL: U-410 FREE SPEED: 10,500 TORQUE RANGE NM: 7-10 TORQUE RANGE FT-LB: 5.0-7.2 SQ. DRIVE: 3/8" NOISE LEVEL: 70 DB(A) AIR USAGE: 5.3 CFM. 4LBS - 10IN X 10IN X 6IN

2018 EVEST MI552 DUAL LENS STACKING MICRO ASSEMBLY SYSTEM WITH 4-AXIS LINEAR ROBOT. THIS SYSTEM IS IN FAIR COSMETIC CONDITION, LOOKING CLEAN INSIDE AND OUT, BUT WITH SEVERAL PARTS DISMOUNTED, DISCONNECTED, OR MISSING. IT SEEMS SOMEONE WAS IN THE PROCESS OF CHANGING THE CONFIGURATION OF THE WORK CELL INSIDE BUT DIDN'T COMPLETE IT. THERE ARE A FEW HOSES AND CABLES WE DON'T KNOW WHAT THEY GO TO, DISCONNECTED. A FEW ILLUMINATORS ARE NOT MOUNTED ON CAMERAS, THERE IS WHAT LOOKS LIKE A CAMERA CABLE NOT CONNECTED TO A CAMERA, AND THERE IS A CAMERA HANGING LOOSE BY CABLES. A VACUUM CHUCK PLATFORM IS DISMOUNTED. A KEYENCE LK-H055 IS LOOSE INSIDE, POWERED ON; A SIMCO IONIZED AIR BLOWER POWER SUPPLY IS ALSO LOOSE, BUT IT'S NOT POWERED. THE HEPA FILTER ON TOP IS NOT SECURED TO THE CASE. THE STACK LIGHT ON TOP IS MISSING ALL ITS LIGHT MODULES. THERE IS A BIG CRACK ON THE CLEAR PANEL BY THE LOADING/UNLOADING STATIONS. THE COMPUTER IS UNBOLTED FROM ITS MOUNTS INSIDE THE BASE CABINET. ONE OF THE GRIPPERS ON THE LOADING/UNLOADING STATIONS IS DISMOUNTED. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS SYSTEM IS NOT WORKING PROPERLY. WHEN THE SYSTEM IS OFF, THE MOTORS ON THE LINEAR AXES MOVE FREELY. WHEN THE READY BUTTON IS PRESSED, THE MOTORS HOLD THEMSELVES IN PLACE, SO AT LEAST THE DRIVES ARE WORKING. WHEN THE MI-552 SOFTWARE LOADS, IT GIVES A DEVICE NUM INCORRECT ERROR BUT CONTINUES TO LOAD THE SOFTWARE. WHEN WE TRIED TO VISIT DIFFERENT SCREENS IN THE SOFTWARE, IT GAVE AN "INSUFFICIENT PRIVILEGES" ERROR. WE DO NOT HAVE A USER ID OR PASSWORD FOR THIS SOFTWARE. PRESSING ONSCREEN BUTTONS TO JOG ANY AXIS GIVES A "FAIL" MESSAGE, COMPLAINING THE DESTINATION OF Z AXIS IS OVER SOFTWARE POSITIVE LIMIT BECAUSE IT'S NOT HOMED... AND WE CAN'T HOME THE ROBOT BECAUSE WE CAN'T VISIT THE OTHER SCREENS TO COMMAND A HOME FUNCTION! WE WERE NOT ABLE TO MAKE ANYTHING MOVE OR OTHERWISE RESPOND TO COMMANDS FROM THE SOFTWARE. THE TOUCHSCREEN RESPONDS TO USER INPUTS AS EXPECTED. THE UNMOUNTED/LOOSE CAMERA GIVES A COLOR VIDEO FEED TO THE TOP/RIGHT SMALLER MONITOR. DUE TO MISSING/DISCONNECTED PARTS AND THE INABILITY TO MAKE THE ROBOT MOVE, THIS LOT WILL BE SOLD AS-IS NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) EVEST MI552 DUAL LENS STACKING ROBOT SPECIFICATIONS: MANUFACTURER: EVEST CORP. MODEL: MI552 DUAL LENS STACKING AUTOMATIC SYSTEM MI500-SERIES AUTOMATED, HIGH-PRECISION DISPENSING AND ASSEMBLY SYSTEM INTEGRATED MACHINE VISION CAMERAS LOADING/UNLOADING EXTERIOR STATIONS XY ROBOT HAS (3) ACCEL MLFP IRONLESS LINEAR MOTORS, ABOUT 50 X 33 MM TRAVEL (ESTIMATED, HARD TO MEASURE) Z AXIS ROBOT HAS SERVOMOTOR LINEAR ACTUATORS MUSASHI DIGITAL SYRINGE DISPENSE CONTROLLER PC CONTROL RUNNING WINDOWS, I5-2400CPU VARIABLE SPEED HEPA AIR FILTER/FAN UNIT ON TOP WITH SUPERB SU5-4040BS FILTER PANEL POWER REQUIREMENTS: 200-240V 1PHASE 50/60HZ 12.5A, PLUS COMPRESSED AIR MANUFACTURED IN 2018 MANY HOSES AND CABLES DISCONNECTED APPEARS TO BE NEARLY COMPLETE BUT PARTLY DISASSEMBLED SOLD AS-IS SKU: X47D001 5K-19-01(1) 1565LBS - 57IN X 46IN X 80IN

WIRE RACK / SHELVING 48"X36"X53 BLACK, FOUR SHELVES

[UNBRANDED] ADJUSTABLE EDGE BELT CONVEYOR THK+HIWIN LINEAR XY AXES LINEAR GUIDE RAIL RITO. ADJUSTABLE-WIDTH EDGE BELT CONVEYOR (18" TO 2" BELT SEPARATION). CONVEYOR LENGTH: 25". CONVEYOR CAN BE PROJECTED UP TO 15" WITH ADJUSTABLE TRAVEL STOPS. EFFECTIVE CONVEYOR LENGTH AFTER PROJECTION: APPROXIMATELY 40". LINEAR MOTION PARTS: BOTTOM RAILS: (2) THK SR25 RAILS, 64CM LONG, WITH 4 RECIRCULATING BALL-BEARING BLOCKS. BOTTOM ACTUATOR: BIMBA RODLESS AIR CYLINDER. TOP RAILS: (2) HIWIN MGN15H RAILS, 55CM LONG, WITH 4 RECIRCULATING BALL BEARING BLOCKS. TOP ACTUATOR: STEP MOTOR DRIVING 1/2" SCREW. BOTTOM HAS A "HELPER" CYLINDER AT ONE END OF TRAVEL, CAN BE A SHOCK ABSORBER OR ASSIST INITIAL MOTION STRENGTH FOR PROJECTION. SWITCHES: OPTICAL SWITCH DETECTS OBJECT ON CONVEYOR. OPTICAL SWITCHES DETECT MAXIMUM/MINIMUM CONVEYOR WIDTH. OPTICAL SWITCHES DETECT ENDS OF PROJECTION TRAVEL. HEAVY PLATE ALUMINUM CHASSIS. ENCLOSED "E-CHAIN" STYLE WIRE MANAGEMENT. ADJUSTABLE-HEIGHT LEVELING FEET EACH CORNER. ELECTRONICS ON THE "RIGHT". OUTSIDE DIMENSIONS APPROXIMATELY 27" X 25" X 10", 90LBS. REMOVED FROM A DECOMMISSIONED MACHINE AS A MODULE. THE AIR CYLINDERS MOVE WHEN AIR IS APPLIED. THE SCREW FOR THE WIDTH ADJUSTMENT TURNS EASILY BY HAND. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN.

[MAGSTAR TECHNOLOGIES] QUICKDRAW 800574 MR OPEN-CENTER SLIP-ROLLER CONVEYOR SYSTEM ESD LEFT + RIGHT - MANUFACTURER: MAGSTAR TECHNOLOGIES MODEL: 800574 CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THIS CONVEYOR IS IN FAIR COSMETIC CONDITION WITH SEVERAL BLEMISHES FROM PRIOR USE (SCUFFS/SCRATCHES/STAINS). THE MOTOR ENCLOSURES HAVE SOME HEAVY DENTS/SCRATCHES/CRACKS. ONE OF THE WHITE COSMETIC COVERS HAS SCREW HOLES ALL ALONG ITS SIDE (SEE PHOTO #4). THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS CONVEYOR WAS REMOVED FROM A DECOMMISSIONED MACHINE. WE DID NOT TEST IT SEPARATELY. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) MAGSTAR QUICKDRAW 60" CONVEYOR PAIR SPECIFICATIONS: MANUFACTURER: MAGSTAR TECHNOLOGIES P/N: 800574 MR-SERIES QUICKDRAW CONVEYOR CONVEYOR LENGTH: 60" OPEN-CENTER MOTORS ON BOTH SIDES ALLOW ANY SEPARATION WIDTH BELT-DRIVEN SLIP-ROLLER EDGE CONVEYOR T-SLOT BOTTOM RAIL FOR MOUNTING SLIP ROLLERS ALLOW CONTROLLED ACCUMULATION OF PARTS ESD SAFE SKU: R40D018 5C-02-02(1) 22LBS - 65IN X 8IN X 8IN

[RHOMBUS ROLLEN] CASTERS TWO ROLLING TWO LOCKING GALVANIZED STEEL (4) - MANUFACTURER: RHOMBUS ROLLEN MODEL: DOES NOT APPLY CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. PHYSICALLY, THESE CASTERS ARE IN GOOD OVERALL COSMETIC CONDITION WITH SCUFFS AND SCRATCHES FROM PREVIOUS USE. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: THESE CASTERS SWIVEL AND ROLL AS DESIGNED. NO FURTHER TESTING WAS PERFORMED. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (2) RHOMBUS ROLLEN CASTERS LOCKING GALVANIZED STEEL (2) RHOMBUS ROLLEN CASTERS ROLLING GALVANIZED STEEL SPECIFICATIONS: MANUFACTURER: RHOMBUS ROLLEN MODEL: UNKNOWN DESCRIPTION: RHOMBUS ROLLEN CASTERS TWO ROLLING TWO LOCKING GALVANIZED STEEL SWIVEL TYPE WHEEL DIAMETER: 3" WHEEL WIDTH: 1.50" TOTAL HEIGHT: 4.25" STEM HOLE WIDTH: 0.50" SKU: W22G007 1D-01-01(12) 8LBS - 12IN X 12IN X 7IN

[NEW] TIG STAR TS57N74 #8L CERAMIC GAS LENS NOZZLE 1/2" (20) CERAMIC TIG WELD GAS LENS CUP NOZZLE #8L 1/2" SKU: V02H001 4B-04-02(1) 4LBS - 8IN X 8IN X 7IN

[SPEEDLINE] ACCELA STENCIL SCREEN PRINTER MECHANICAL HEART X/Y/Z/SQUEEGEE AXIS. MANUFACTURER: SPEEDLINE. MODEL: ACCELA. CONDITION: FOR PARTS OR NOT WORKING. COMES IN NON-ORIGINAL PACKAGING. THIS ASSEMBLY IS IN GOOD COSMETIC CONDITION FOR WHAT IT IS. THE MOTOR FOR THE BIG Z AXIS IS MISSING. THE TIMING/DRIVE BELT FOR THE SQUEEGEE WIPER AXIS IS MISSING. ALL THE DRIVES FOR THE MOTORS AND ALL CONTROLLERS ARE MISSING. THE SQUEEGEE BLADES ARE MISSING. NOTE: THE SHOWN CRATE IS WHAT WE HAD ON HAND WHEN THIS CAME ON BOARD, WE WILL BUILD A BETTER/STURDIER CUSTOM FRAME FOR THIS WHEN WE SHIP TO YOU! THIS IS BEING LISTED AS/IS. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS WAS REMOVED FROM A DECOMMISSIONED SPEEDLINE ACCELA PRINTER AND NOT TESTED SEPARATELY. THIS IS BEING LISTED AS/IS. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) SPEEDLINE ACCELA MOVING PART ASSEMBLY. REMOVED FROM: ACCELA PRINTER. X, Y, Z, ANGULAR ROTATION AND SQUEEGEE MOTION MECHANISMS. ALL MOTORS EXCEPT Z AXIS. WITH LIMIT SWITCHES. WITH PLATFORM UP/DOWN PNEUMATICS. (7) SMALL THK SR20 LINEAR MOTION GUIDES 2 BEARING EACH ON LOWER AXES. (2) LARGE LINEAR MOTION GUIDES WITH 2 BEARINGS EACH ON Z AXIS. (4) POWERMAX II M22NSHB STEP MOTORS. 21" X 23" BED HAS 1" GRID CARVED IN TOP. SKU: U18D007 5K-06-02(1) 420LBS - 48IN X 40IN X 48IN

SANDVIK COROMANT 5908964 CNGG432 SGF H13A CARBIDE TURNING INSERT (13) MANUFACTURER: SANDVIK COROMANT MODEL: 5908964 ISO NO: CNGG 12 04 08-SGF H13A ANSI NO: CNGG 432-SGF H13A DESCRIPTION: CNGG432 SGF H13A CARBIDE TURNING INSERT INSCRIBED CIRCLE: 0.500" (12.70MM) LENGTH: 0.3346" (8.50MM) THICKNESS: 0.1875" (4.76MM) CORNER RADIUS: 0.0313" (0.7938MM) HOLE DIAMETER: 0.2030" (5.16MM) CHIP BREAKER: SGF GRADE: H13A

2021 UNBRANDED 1.4M OPEN-CENTER CONVEYOR MODULE WITH SERVOTRONIX MOTOR, 3 STOPS. COMES IN OPENED ORIGINAL CRATE. GOOD COSMETIC CONDITION WITH ONLY MINOR SCUFFS HERE AND THERE. INCLUDED: (1) 1.4M OPEN-CENTER CONVEYOR MODULE (1) SERVOTRONIX MOTOR POWER CABLE (1) ETHERCAT CABLE (1) GROUND CABLE. SPECIFICATIONS: OPEN-CENTER EDGE-BELTED CONVEYOR 140 CM TOTAL LENGTH. MANUAL WIDTH ADJUSTMENT. AS-CONFIGURED BELT OPENING 40CM WIDE. IF ACCESSORIES WERE REMOVED, POSSIBLY 8CM TO 56CM OPENING. 1" WIDE BELTS. BELTS ARE GEAR DRIVEN BY SERVOTRONIX STEPIM MOTOR. MOTOR: SERVOTRONIX STEPIM SERIES MODEL: IST-34M26EC100000-BM P/N: PRDR34SBM6520100M-01 BUS INPUT: 14-75 VDC AUXILIARY INPUT: 6-24 VDC HOLDING TORQUE: 5.0 NM. WIDTH ADJUSTMENT HAS (2) DRIVE SCREWS AND (2) LM-16UU BALL BEARING LINEAR SHAFTS TO MAINTAIN PARALLEL. PNEUMATIC STOP GATES AT THREE POSITIONS (REXROTH 3842530630), WITH SENSORS. PNEUMATIC "TRAY LOCKS" ON BOTH SIDES, (SMC JMGPM25-20 AIR CYLINDERS). TRAY LOCKS ARE COMPLETELY OUTSIDE THE BELT AREA, DO NOT BLOCK THE BELTS AT ALL. TRAY LOCKS HAVE ABOUT 2CM UNDER-STOP CLEARANCE. TRAY LOCKS HAVE AUTOSWITCHES FOR UP AND DOWN. ENTIRE ASSEMBLY HAS A FLAT BOTTOM PLATE, SIMPLE TO INTEGRATE IN YOUR SETTING. APPROXIMATELY 35" WIDE. APPROXIMATELY 14CM FROM MOUNTING PLATE TO TOP OF CONVEYOR BELTS. (3) BECKHOFF D-33415 ETHERCAT CONNECTION TERMINAL GIVES CENTRAL LOCATION TO HOOK UP ALL THE SWITCHES & SENSORS. (5) FESTO VUVG-B10 PNEUMATIC VALVES ON VTUG MANIFOLD. T-SLOT MOUNTING RAILS FOR ACCESSORIES. SKU: X20D008 6-BILR1(1) 367LBS - 63IN X 40IN X 19IN

VITRONICS SOLTEC XPM3I REFLOW OVEN HEATER PANEL S/N: 3199401. THIS PANEL IS USED AND SHOWS SIGNS OF REGULAR USE AND COSMETIC WEAR. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: THIS ITEM WAS PULLED FROM A WORKING ENVIRONMENT AND WAS NOT TESTED. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) VITRONICS SOLTEC XPM3I REFLOW OVEN HEATER PANNEL 3199401 SPECIFICATIONS: MANUFACTURER: VITRONICS SOLTEC MODEL: 3199401 HEATER PANEL DIMENSIONS: LENGTH: 25 INCHES WIDTH: 12 INCHES SKU: W03G001 1E-06-05(28) 14LBS - 28IN X 15IN X 4IN

[BROOKS INSTRUMENT SLA7950D1EGG1A2A1] 3000 SCCM DELTA CLASS MASS FLOW CONTROLLER AR GAS MANUFACTURER: BROOKS INSTRUMENT MODEL: SLA7950D1EGG1A2A1 PART NUMBER: 41529-90 MASS FLOW CONTROLLER SCCM: 3000 GAS/MEDIUM: ARGON (AR) PROCESS/AMBIENT TEMPERATURE: 5 TO 65 C INLET PRESSURE: 20 PSIG OUTLET PRESSURE: 0 PSIA VALVE: NC SURF FIN: 10 RA SEAT: METAL SEAL: METAL ELECTRICAL CONNECTION: 5 PIN, .465" THREAD ORIFICE: .032 RESTRICTOR: V MOUNTING: BASE MOUNTING

NEW 30" X 2900' ROLL OF 1.5 MIL LOW DENSITY LDPE CLEAR POLY HEAT TUBING 3" CORE - MANUFACTURER: UNBRANDED MODEL: DOES NOT APPLY CONDITION: NEW OTHER. COMES IN NON ORIGINAL PACKAGING. ITEM IS IN NEW COSMETIC CONDITION. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) ROLL OF 1.5 MIL POLY TUBING 30" X 2900' SPECIFICATIONS: MANUFACTURER: UNKNOWN MODEL: UNKNOWN COLOR: CLEAR LENGTH: 2900' THICKNESS: 1.5 MIL WIDTH: 30" CORE DIAMETER: 3"

[INDUSTRIAL MACHINE LEG/BASE BLACK 16" X 11" X 11" ADJUSTABLE BOLT SHAFT] MANUFACTURER: UNBRANDED MODEL: DOES NOT APPLY CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THE LEG/BASE IS IN GOOD, USED CONDITION WITH SOME SCUFFS AND SCRATCHES FROM PREVIOUS USE. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: THE BASE/LEG WAS REMOVED FROM A DECOMMISSIONED ENVIRONMENT. THE ADJUSTABLE BOLT/THREAD SHAFT SCREWS INTO THE LEG BASE WITH NO OBSTRUCTION. NO FURTHER TESTING WAS PERFORMED AFTER REMOVAL. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) INDUSTRIAL MACHINE LEG/BASE BLACK 15.75" X 11.125" X 11" ADJUSTABLE BOLT SHAFT SPECIFICATIONS: MANUFACTURER: UNBRANDED MODEL: DOES NOT APPLY INDUSTRIAL MACHINE LEG/BASE HEIGHT FROM BASE: 15.75" WIDTH: 8.125" DEPTH: 8" BASE DIMENSIONS: 11.125" X 11" X 0.60" BASE MOUNTING HOLES: .48" COLOR: BLACK CONSTRUCTION MATERIAL: STEEL THREAD DIAMETER: 1.47" WEIGHT: MAX BOLT EXTRUSION: 6.5" SKU: T45B017 5C-09-03(4) 76LBS - 25IN X 19IN X 16IN

(4) STAINLESS STEEL SWIVEL HEAVY DUTY 4" ROLLING CASTER WHEELS & BASES - MANUFACTURER: UNBRANDED MODEL: DOES NOT APPLY CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THE CASTERS ARE IN USED CONDITION WITH SCUFFS AND SCRATCHES FROM HEAVY REGULAR USE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THE CASTERS WERE REMOVED FROM A DECOMMISSIONED MACHINE. THE CAST WHEELS ROLL WITH NO OBSTRUCTION. NO FURTHER TESTING WAS PERFORMED AFTER REMOVAL. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (4) STAINLESS STEEL SWIVEL HEAVY DUTY 4" ROLLING CASTER WHEELS & BASES SPECIFICATIONS: MANUFACTURER: UNKNOWN MODEL: DOES NOT APPLY DESCRIPTION: STAINLESS STEEL SWIVEL HEAVY DUTY 4" ROLLING CASTER WHEELS & BASES HEAVY DUTY STAINLESS STEEL WHEEL DIAMETER: 4" WHEEL WIDTH: 1 1/2" BASE DIMENSIONS: 2 3/4" X 3 3/4" BASE THICKNESS: 1/8" TOTAL HEIGHT: 5" BOLT HOLE WIDTH: 3" 1 3/4"

2008 CONVEYOR TECHNOLOGIES CTI A-MS-30W/CO2-2-1M-2331 LASER MARKER WITH XY STAGE+CONVEYOR. LASER MARKING/LABELING SYSTEM. CONVEYOR CARRIES PALLETS OR CIRCUIT BOARDS THROUGH. HIGH-SPEED XY GANTRY LOCATES LASER MARKER OVER PRODUCT. MACHINE VISION SYSTEM FOR FIDUCAL LOCATING. PRECISION PNEUMATIC BOARD STOPS AND CLAMPS HOLD BOARD IN PLACE. SYNRAD FLYER FHFL30-U 30 WATT CO2 SCANNING LASER MARKER. PC CONTROLLED WINDOWS 10 PLATFORM. FULLY ENCLOSED WITH SAFETY INTERLOCKS AND FRONT-AND-REAR E-STOPS. STATUS LIGHT TOWER WITH ALARM (IS BROKEN). CONVEYOR LENGTH: 1 METER. CONVEYOR WIDTH: ADJUSTABLE (MANUAL). YASKAWA SGMAH AC SERVO MOTORS. BELT-DRIVEN BALLSCREWS AND BALL-BEARING LINEAR MOTION GUIDES. POWER: 208V 60HZ 29.8A. INCLUDED: (1) CTI A-MS-30W/CO2-2-1M-2331 LASER MARKER, (1) CALIBRATION JIG FOR LASER AND CAMERA.

(1) CONTROL INSTRUMENTS B7SNF476 HYDROGEN SENSOR ASSEMBLY W/ RELAY MANUFACTURER: CONTROL INSTRUMENTS MODEL: B7SNF476 POWER: 15-24 VDC, 0.5W TEMPERATURE: INTENDED FOR ROOM TEMPERATURE RELAY CONTACTS: 60W, NON-CONDUCTIVE AC OR DC WEIGHT: LESS THAN 1 LB FINISH: GOLD ANODIZE AVAILABLE CIC RANGE: 0-1000 PPM SIGNAL STRENGTH: 0.03 UA/PPM GAS: H2 M9 POSITION: 2-3 REPLACEMENT CELL CIC: ECM076

[MARKAL 86481] THERMOMELT HEAT STICK TEMP 175-F 79-C (10) - MANUFACTURER: MARKAL MODEL: 86481 CONDITION: NEW OTHER. THESE HEAT STICKS ARE IN A NEW AND UNUSED COSMETIC CONDITION AND COME IN THE ORIGINAL MARKAL BOX THAT CONTAINS 10 STICKS. THE BOX SHOWS SOME MINOR WEAR FROM STORAGE. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (10) MARKAL 86481 THERMOMELT HEAT STICK TEMP 175-F 79-C SPECIFICATIONS: MANUFACTURER: MARKAL MODEL: 86481 DESCRIPTION: THERMOMELT HEAT STICK TEMP 175-F 79-C THE BIG STICK! SKU: U50H013 1B-19-01(3) 2LBS - 8IN X 8IN X 4IN

[BEST WELDS] 2" X 4.25" HARDENED GLASS FILTER PLATE SHADE 10. THESE FILTER PLATES ARE IN NEW AND UNUSED COSMETIC CONDITION AND COME IN THE ORIGINAL BEST WELDS BOX AND INDIVIDUALLY WRAPPED IN THE ORIGINAL BEST WELDS PLASTIC WRAPPING. THE BOXES SHOW SIGNIFICANT WEAR FROM STORAGE BUT THE CONTENTS ARE NEW. MANUFACTURER: BEST WELDS MODEL: 932-105-10 DESCRIPTION: HARDENED GLASS LENS WELDING FILTER PLATE 2" X 4.25" (50.8MM X 108MM) SHADE 10 SKU: V15H020 1B-18-02(1) 8LBS - 12IN X 6IN X 6IN

(8) WIRE ROPE SLINGS, 3/16" X 24", 7 X 19 STRAND CORE, 1-3/8" EYES, 304 SS - MANUFACTURER: UNBRANDED MODEL: DOES NOT APPLY CONDITION: NEW OTHER. THESE SLINGS WILL COME IN NON-ORIGINAL PACKAGING. THEY ARE NEW (NEVER USED) FROM OLD INVENTORY. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (8) WIRE ROPE SLINGS, 3/16" X 24", 7 X 19 STRAND CORE, 1-3/8" EYES, 304 SS SPECIFICATIONS: MANUFACTURER: UNKNOWN MODEL: UNKNOWN DESCRIPTION: WIRE ROPE SLING SIZE: 3/16" X 24" MATERIAL: 304 STAINLESS STEEL CONFIGURATION: EYE & EYE EYE LOOP SIZE: 1-3/8"

2010 SPEEDLINE ACCELA SCREEN PRINTER CONVEYOR 22"X 20" 57"CONV. AS-IS FOR PARTS. MANUFACTURER: SPEEDLINE TECHNOLOGIES MPM MODEL: ACCELA SCREEN PRINTER MAXIMUM PRINT AREA: 22" X 20" MAXIMUM BOARD SIZE: 22" X 20" MINIMUM BOARD SIZE: 2" X 2" BOARD THICKNESS: 0.152MM TO 12.7MM, UP TO 7KG PRINT SPEED: 6MM TO 305MM /SECOND PRINT STROKE: +/-11 FROM CENTER CYCLE TIME: <5.5 SEC VISION ALIGNMENT REPEATABILITY: +/-12.5 MICRONS 57" CROSSWAYS THROUGH CONVEYOR AUTOMATIC STENCIL CLEANER SOFTWARE RUNS ON WINDOWS COMPUTER POWER: 230V 1PHASE 15A 3.5KVA PLUS COMPRESSED AIR MANUFACTURED: 2010. THIS SYSTEM IS IN FAIR COSMETIC CONDITION. SEVERAL CORNER PANELS ARE MISSING. A BOTTOM CORNER PANEL HAS BEEN REPLACED WITH A SCANNER BRACKET. THERE IS WEAR AND SCUFFS/SCRATCHES OUTSIDE, ESPECIALLY ON THE OUTSIDE CORNERS. LABELS ARE DAMAGED. THE COVER IS OFF THE VISION GANTRY. OTHER THAN THAT AND SOME DUST, THE INSIDE OF THE MACHINE LOOKS PRETTY CLEAN. ONE OF THE TOP DOORS HAS MOST OF THE BOLT HOLES ALONG THE BOTTOM EDGE BROKEN, SO THAT DOOR'S BOTTOM LIP IS FALLING OFF AND THE DOOR DOESN'T STAY CLOSED WITH THE MAGNETIC CATCHES. ONE EMO SWITCH HAS BEEN BROKEN-OFF, AND THE MAIN DISCONNECT SWITCH IS WOBBLY-LOOSE. THIS MACHINE IS IN AT-LEAST-PARTIAL WORKING CONDITION. WITHOUT A PASSWORD FOR THE PRINTER SOFTWARE, WE ARE NOT ABLE TO PERFORM THOROUGH TESTING. WE DO NOT HAVE A PASSWORD SO THE MACHINE WAS NOT ABLE TO INITIALIZE. THE POWER LIGHTS ILLUMINATED BUT THE ON SWITCH HAD TO BE PUSHED IN (THE ON LIGHT WOULD NOT STAY ON). THE RED STACK TOWER LIGHT ILLUMINATED. NO OTHER ERRORS WERE NOTED, NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) SPEEDLINE ACCELA SCREEN PRINTER. SKU: X12D014 6-BILR1(1) 4774LBS - 104IN X 70IN X 101IN

PVA CONFORMAL COATING MACHINE. PARTS MACHINE. S/N: W1755

[WHEEL MASTER WI-80] ROLL & SET DISCEAST LEVELLING CASTERS 4"H - PARTS (8) - MANUFACTURER: WHEEL MASTER MODEL: WI-80 CONDITION: FOR PARTS OR NOT WORKING. COMES IN NON-ORIGINAL PACKAGING. THE WHEELS ARE IN USED CONDITION WITH SCUFFS, SCRATCHES, AND RESIDUE FROM PREVIOUS USE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THE CASTERS WERE REMOVED FROM DECOMMISSIONED MACHINES. THE WHEEL SETS ARE BEING SOLD AS/IS FOR PARTS/REPAIR DUE TO SOME OF THE UNITS' MISSING PINS, AS SHOWN IN THE PHOTOS. THE WHEELS ARE STRUCTURALLY SOUND AS WELL AS THE FRAME. NO FURTHER TESTING WAS PERFORMED AFTER REMOVAL. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (8)WHEEL MASTER WI-80 ROLL & SET DISCEAST LEVELLING CASTERS 4"H SPECIFICATIONS: MANUFACTURER: WHEEL MASTER MODEL: WI-80 ROLL & SET LEVEL CASTERS MEDIUM DUTY FINISH: POWDERCOATED, GALVANIZED ZINC TOTAL HEIGHT OF UNIT: 4" WHEEL DIAMETER: 2.48" PLATE DIMENSIONS: 90MM X 90MM X 7MM RECOMMENDED LOAD: 50KG MAX LOAD: 1000KG OPERATING TEMPERATURE: -10 TO 90C

[KISTLER DEPRAG] 9039Q02 347C-528-31 PNEUMATIC SCREWDRIVER MANUFACTURER: KISTLER / DEPRAG MODEL: 9039Q0 / 347C-528-31 OPERATION: PNEUMATIC CONDITION: USED QUANTITY: 1 3LBS - 15IN X 6IN X 6IN