Industrial Electronic Manufacturing Process Equipment Parts Tools Day 3 of 3 day event

(1) ARMSTRONG 33-058 1-13/16" 12-POINT 45-DEGREE OFFSET SLUGGING STRIKING WRENCH MANUFACTURER: ARMSTRONG MODEL: 33-058 DESCRIPTION: 12-POINT 45-DEGREE OFFSET SLUGGING STRIKING WRENCH SIZE: 1-13/16" HEAD DIAMETER: 2.812" HEAD THICKNESS: 1.125" OAL: 12.5" WEIGHT: 5.85LBS

[LAUDA NOAH] [905-PS2] CHILLER CONTROLLER/ POWER SUPPLY VOLTAGE: 208VAC NOM. 3-PHASE, 4-WIRE SOURCE FREQUENCY 50/60 HZ SOURCE CURRENT: 30A LAUDA NOAH 905-PSC2 VERSATILE 50-000003-01 CHILLER CONTROLLER 208V 3PH 30A EMO DISABLE KEY MANUFACTURER: LAUDA NOAH PART NUMBER: 900-PSC2 A.K.A. VERSATILE POWER P/N 50-000003-01 REV 22 47LBS - 36IN X 25IN X 10IN

[NEW] HOUGEN 76367 7/8" PUNCH-PRO ROUND PUNCH FOR 75006PR PUNCH MACHINE. THIS ROUND PUNCH IS A NEW-OLD-STOCK ITEM AND COMES IN ITS ORIGINAL OPEN-BOX PACKAGING AND SHOWS MINOR SPOTS OF RUST AND OTHER MARKINGS TYPICAL FROM STORAGE AND HANDLING. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. SPECIFICATIONS: MANUFACTURER: HOUGEN MODEL: 76367 DESCRIPTION: PUNCH-PRO ROUND PUNCH FOR 75006PR PUNCH MACHINE NOMINAL SIZE: 7/8" ACTUAL SIZE: 0.875" METRIC: 22.2MM. SKU: V02U012. 2LBS - 6IN X 6IN X 4IN

(1) RELIANCE TOLEDO SCALE 114242-00-A 100K LOAD CELL. MANUFACTURER: RELIANCE/TOLEDO SCALE MODEL: 114242-00-A LOAD CELL OUTPUT 2MV/V AT 100K LBS. 32LBS - 12IN X 12IN X 12IN

[DEPRAG 343-518U] STRAIGHT DESIGN 1/4" PNEUMATIC AIR DRIVER - PARTS (3) - MANUFACTURER: DEPRAG MODEL: 343-518U CONDITION: FOR PARTS OR NOT WORKING. COMES IN NON-ORIGINAL PACKAGING. THE AIR DRIVERS ARE IN USED CONDITION WITH SCUFFS, SCRATCHES, AND SOME GREASE RESIDUE FROM PREVIOUS USE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THE UNITS WERE REMOVED FROM DECOMMISSIONED ENVIRONMENTS. THE UNITS ARE BEING SOLD AS IS FOR PARTS OR REPAIR DUE TO BEING UNABLE TO VERIFY CALIBRATION, AND THEREFORE TEST THE UNITS. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (3) DEPRAG 343-518U STRAIGHT DESIGN 1/4" PNEUMATIC AIR DRIVER 0.33" NIPPLE SPECIFICATIONS: MANUFACTURER: DEPRAG MODEL: 343-518U PNEUMATIC HANDHELD SCREWDRIVER BIT COMPATIBILITY: 1/4" AIR INLET: NIPPLE, 1/4" MANUALLY ACTUATED DESIGN: STRAIGHT SERIES: MINIMAT ULTRA COLOR: BLACK HIGH-PRECISION REVERSIBLE SKU: W30B017 1E-12-02(1) 5LBS - 12IN X 6IN X 6IN

[TIG STAR TS53N60] TIG TORCH GAS LENS CUP (38) - MANUFACTURER: TIG STAR MODEL: TS53N60 CONDITION: NEW OTHER. THESE NOZZLES ARE IN A NEW AND UNUSED COSMETIC CONDITION AND COME INDIVIDUALLY PACKAGED IN THE ORIGINAL TIG STAR BOX THAT DOES SHOW SOME SIGNS OF SHELF WEAR AND OCCASIONALLY WRITING ON THE OUTSIDE OF THE BOX. ONE OF THE BOXES ONLY CONTAINS 8 CUPS AND THE TOP IS TORN WHERE THE OTHER BOXES CONTAIN 10. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (38) TIG STAR TS53N60 #6 CERAMIC TIG TORCH GAS LENS CUP SPECIFICATIONS: MANUFACTURER: TIG STAR MODEL: TS53N60 DESCRIPTION: CERAMIC TIG GAS LENS CUP #7 3/8" 11M SKU: U51H013 1B-09-02(1) 2LBS - 8IN X 8IN X 4IN

TIG STAR T53N16S #8 CERAMIC TIG GAS LENS CUP (40) MANUFACTURER: TIG STAR MODEL: T53N16S CONDITION: NEW OTHER. THESE NOZZLES ARE IN A NEW AND UNUSED COSMETIC CONDITION AND COME INDIVIDUALLY PACKAGED IN THE ORIGINAL TIG STAR BOX THAT DOES SHOW SOME SIGNS OF SHELF WEAR. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (40) TIG STAR T53N16S #8 CERAMIC TIG GAS LENS CUP SPECIFICATIONS: MANUFACTURER: TIG STAR MODEL: T53N16S DESCRIPTION: CERAMIC TIG GAS LENS CUP #8 1/2" 12.7MM (9 20) SKU: U51H015 1B-08-02(2) 2LBS - 8IN X 8IN X 4IN

(1) ALLEN-BRADLEY 1606-XLP72E COMPACT SINGLE-PHASE POWER SUPPLY 24-28VDC OUTPUT. MANUFACTURER: ALLEN-BRADLEY MODEL: 1606-XLP72E COMPACT POWER SUPPLY INPUT VOLTAGE: 100-120/220-240 VAC OUTPUT VOLTAGE: 24-28 VDC POWER: 72 WATTS MOUNTING: DIN RAIL FREQUENCY: 50-60 HZ OPERATIONAL TEMPERATURE: -10...+60 DEGREES C

[BUFFALO HWP4000] PRINTER BUFFER MODULE PARALLEL 4-1 OR 3-2 PORT CONFIGURATION. MANUFACTURER: BUFFALO MODEL: HWP4000 PRINTER BUFFER MODULE TYPE: PARALLEL CONFIGURATION: 4 TO 1 OR 3 TO 2 PORTS INTERFACE: SERIAL DIMENSIONS: 8.625"L X 6.625"H X3.125"W CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THE MODULE IS IN GOOD, USED CONDITION WITH SOME MINOR SCUFFS AND SCRATCHES FROM PREVIOUS USE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THE MODULE WAS REMOVED FROM A DECOMMISSIONED MACHINE. THE DEVICE WAS POWERED ON, AS SHOWN IN THE PHOTOS. NO FURTHER TESTING WAS PERFORMED AFTER REMOVAL. THE UNIT IS MISSING THE POWER BUTTON. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) BUFFALO HWP4000 PARALLEL PRINTER BUFFER MODULE 4-1 OR 3-2 PORT CONFIGURATION SPECIFICATIONS: MANUFACTURER: BUFFALO MODEL: HWP4000 PRINTER BUFFER MODULE TYPE: PARALLEL CONFIGURATION: 4 TO 1 OR 3 TO 2 PORTS INTERFACE: SERIAL DIMENSIONS: 8.625"L X 6.625"H X3.125"W SKU: W24B005 1E-09-03(1) 6LBS - 12IN X 12IN X 7IN

[4] VINTEN 6" X 1-1/4" POLYURETHANE INDUSTRIAL CASTER WHEELS. MANUFACTURER: VINTEN. OUTSIDE DIAMETER: 6". INSIDE DIAMETER: 2". WHEEL WIDTH: 1-1/4". COLOR: BLACK. WHEEL MATERIAL: POLYURETHANE. FRAME MATERIAL: STEEL.

BEST WELDS 2" X 4.25" HARDENED FILTER PLATE (50) MANUFACTURER: BEST WELDS MODEL: 932-105-5 DESCRIPTION: HARDENED GLASS LENS WELDING FILTER PLATE 2" X 4.25" (50.8MM X 108MM) SHADE 5 SKU: U49H014 1E-09-01(2) 8LBS - 12IN X 6IN X 6IN

[NEW] TSUBAKI TGX20-L SHOCK GUARD TGX SERIES SIZE 10 ROTATION SPEED 1,110 RPM. MANUFACTURER: TSUBAKI. MODEL: TGX20-L. CONDITION: NEW. COMES IN FACTORY ORIGINAL PACKAGING. INCLUDES: (1) TSUBAKI TGX20-L SHOCK GUARD. SPECIFICATIONS: MANUFACTURER: TSUBAKI. MODEL: TGX20-L. DESCRIPTION: SHOCK GUARD. SIZE: SIZE 10. MAX ROTATIONAL SPEED: 1,100 RPM. WEIGHT: 4.00 LBS. SKU: P47P005 1D-06-02(1). DIMENSIONS: 8IN X 8IN X 7IN.

INDUSTRIAL GREY SWIVEL SHAFT TYPE ROLLING CASTER WHEELS DOUBLE WHEEL SHAFT TYPE WHEEL DIAMETER: 3" WHEELS WIDTH: 2.25" TOTAL HEIGHT: 4" SKU: W21G011 4A-02-02(3) 8LBS - 12IN X 12IN X 9IN - MANUFACTURER: UNKNOWN MODEL: DOES NOT APPLY CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THE CASTERS ARE IN USED CONDITION WITH SCUFFS, SCRATCHES, AND SOME RESIDUE FROM PREVIOUS USE. THESE CASTERS DO NOT COME WITH THEIR SHAFTS. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: THE CASTERS WERE REMOVED FROM DECOMMISSIONED MACHINES. THE WHEELS ROLL AND THE SWIVEL BASE WORKS AS INTENDED. NO FURTHER TESTING WAS PERFORMED AFTER REMOVAL. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (4) DOUBLE WHEEL INDUSTRIAL GREY SWIVEL SHAFT TYPE ROLLING CASTER WHEELS

[DEWALT DW4999] TYPE 27 HIGH PERFORMANCE GRINDING WHEELS 7"D. MANUFACTURER: DEWALT MODEL: DW4999. SPECIFICATIONS: HIGH PERFORMANCE GRINDING WHEELS ARBOR/SPINDLE: 5/8"-11" DIAMETER: 7" 1/4" GRAIN: ALUMINUM OXIDE MAX RPM: 8700 APPLICATION: FERROUS METAL ANSI STANDARD: TRUE.

DAYTON CUSTOMIZED HAND TRUCK MODEL 1W680H W/ WELDED EXTENSION 8' HIGH SKU: CLY11A001 6-OUTSIDE(9) 999LBS - 999IN X 999IN X 999IN

SWIVEL TYPE RUBBER TIRE INDUSTRIAL HEAVY-DUTY ROLLING CASTER WHEELS (4) - MANUFACTURER: UNKNOWN MODEL: DOES NOT APPLY CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THE CASTERS ARE IN USED CONDITION WITH SCUFFS, SCRATCHES, AND RESIDUE FROM PREVIOUS USE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THE CASTERS WERE REMOVED FROM DECOMMISSIONED MACHINES. THE WHEELS ROLL AND THE SWIVEL BASE WORKS AS INTENDED. NO FURTHER TESTING WAS PERFORMED AFTER REMOVAL. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (4) SWIVEL TYPE RUBBER TIRE INDUSTRIAL HEAVY-DUTY ROLLING CASTER WHEELS SPECIFICATIONS: MANUFACTURER: UNKNOWN MODEL: DOES NOT APPLY DESCRIPTION: SWIVEL TYPE RUBBER TIRE INDUSTRIAL HEAVY-DUTY ROLLING CASTER WHEELS TWO LOCKING TWO NON-LOCKING WHEEL DIAMETER: 5" WHEEL WIDTH: 1" BASE DIMENSIONS: 4" X 3.25" TOTAL HEIGHT: 6" BOLT HOLE WIDTH: 2.50" X 3.25"

[4] S INDUSTRIAL SWIVEL TYPE HEAVY-DUTY ROLLING 3" CASTER WHEELS WHEEL DIAMETER: 3" WHEEL WIDTH: 1.25" BASE DIMENSIONS: 4.25" TOTAL HEIGHT: 3.50" BOLT HOLE WIDTH: 3.50" X 2.50"

EBM-PAPST R2E250-AL05-15 3100 U/MIN BACKWARD-CURVED MOTORIZED IMPELLER FAN 230V SPECIFICATIONS: MANUFACTURER: EBM-PAPST MODEL: R2E250-AL05-15 BACKWARD-CURVED MOTORIZED IMPELLER FAN VOLTAGE RATING: ~230VAC FREQUENCY: 60HZ SPEED: 3100 U/MIN INSULATION CLASS F WIRING: 3-WIRE + GROUND CAPACITANCE: 5UF POWER OUTPUT: 285W DIMENSIONS: 250MM X 250MM X 4.25" (FRAME) 5.25" TOTAL HEIGHT MADE IN GERMANY

[CAMBRIDGE FILTER] [2T69516093-2284-NDF] ABSOLUTE FILTER II HEPA 220V (29.5" X 6.25" X 4") MANUFACTURER: CAMBRIDGE FILTER MODEL: 2T69516093-2284-NDF ABSOLUTE FILTER II INDUSTRIAL MINI PLEAT HEPA FILTER DUAL FAN DESIGN DESIGNED FOR LOW POWER CONSUMPTION AND LOW PRESSURE DROP VOLTAGE: 200-220 VAC EFFICIENCY: 99.999<% RATED FLOW: 1.8 M CUBED/MIN OVERALL DIMENSIONS: 29.5"X6.25"X4" FILTER AREA: 22 1/2" X 5 3/8"

[BISON] [3575-6 1/4"-M] SUPER INDEXING SPACER & 3-JAW CHUCK. CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THE INDEXING SPACER ASSEMBLY AND CHUCK IS IN USED CONDITION WITH SOME SCUFFS AND SCRATCHES FROM PREVIOUS USE. THERE IS DISCOLORATION AND GREASE RESIDUE FROM PREVIOUS REGULAR USE IN AN INDUSTRIAL SETTING. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THE INDEXER ASSEMBLY WAS REMOVED FROM A DECOMMISSIONED ENVIRONMENT. THE CHUCK EXPANDS AND RETRACTS AS INTENDED. NO FURTHER TESTING WAS PERFORMED AFTER REMOVAL. ONE OF THE ENDPIECES IS MISSING FROM THE BASE ADJUSTMENT LEVER, AS SHOWN IN THE PHOTOS. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) BISON 3575-6 1/4"-M SUPER INDEXING SPACER & 3-JAW CHUCK 360 DEGREE POSITION SPECIFICATIONS: MANUFACTURER: BISON MODEL: 3575-6 1/4"-M SUPER INDEXING SPACER & CHUCK POSITION: 360 DEGREES CHUCK TYPE: 3-JAW SIZE: 6 1/4" MATERIAL: CAST IRON STANDARD ACCURACY CHUCK THROUGH-HOLE: 1.653" SPACER THROUGH-HOLE: 0.866" CENTERLINE: 4.92"H MADE IN POLAND.

(4) INDUSTRIAL 3" X 1.25" TWO LOCKING BLUE SWIVEL CASTER CART WHEELS - MANUFACTURER: UNKNOWN MODEL: DOES NOT APPLY SWIVEL TYPE: TWO LOCKING TWO NON-LOCKING WHEEL DIAMETER: 3" WHEEL WIDTH: 1.25" TOTAL HEIGHT: 4.75" SHAFT LENGTH: 0.75" SHAFT DIAMETER: 0.25"

COPELAND 6DJNF11ME-FSD-500 DISCUS COMPRESSOR 110K BTU/HR 460V 3PHASE CORESENSE. THIS COMPRESSOR IS IN FAIR COSMETIC CONDITION. THERE IS SURFACE RUST ON SEVERAL SPOTS, INCLUDING THE FAN, MOUNTING AREAS, AND NEAR BOLT HEADS. THE OIL IN THE SIGHT GLASS LOOKS LIKE CLEAR HONEY. THERE ARE LOTS OF LITTLE BITS OF INSULATION STILL ON THE EXTERIOR PLUMBING. THIS COMPRESSOR IS IN GOOD WORKING CONDITION. IT WAS BRIEFLY TESTED AFTER REMOVAL AND RAN QUIETLY, AND PULLED 30"HG. THE VACUUM REMAINED AFTER THE PUMP WAS SHUT OFF. WE DID NOT PUMP IT INTO A PRESSURE TANK. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) COPELAND 6DJNF11ME-FSD-500 COMPRESSOR INLET AND OUTLET PIPING AS SHOWN SPECIFICATIONS: MANUFACTURER: COPELAND SKU: 6DJNF11ME-FSD-500 COMPRESSOR, SEMI-HERMETIC DISCUS TYPE, WITH CORESENSE CAPACITY AT RATING: 110K BTU/HR ARI LOW TEMP. RATED @ -25/105 POE OIL INTERNAL THERMAL PROTECTION, USE WITH EXTERNAL CONTACTOR/CONTROLS POWER: 3PHASE 60HZ 460V OR 50HZ 380-420V MARKED AS BEING USED WITH R-404A PREVIOUSLY COOLING EFFICIENCY (EER): UP TO 5.2 6 LEAD 3 PHASE MOTOR SKU: X37D009 5C-13-01(1) 600LBS - 48IN X 40IN X 40IN

[PARKER S57-83 COMPUMOTOR MICROSTEPPING INDEXER DRIVE] MANUFACTURER: PARKER MODEL: S57-83 COMPUMOTOR S SERIES INDEXER DRIVE UNIT SERIES: S ACCURACY: +/-5 ARC MIN (0.0833 DEGREES) TYPICAL MOTOR TYPE: 2-PHASE HYBRID PERM. MAGNET, 1.8 DEGREES NUMBER OF LEADS: 4, 6, OR 8 POWER INPUT: 90-130 VAC FREQUENCY: 50/60 HZ WAVEFORM: SELECTABLE. PURE SINE -2%, -4%, -6%, -10%, THIRD HARMONIC AMPLIFIER TYPE: 20 KHZ FIXED FREQUENCY, VARIABLE DUTY CYCLE PWM. CURRENT CONTROLLED, BIPOLAR TYPE. MOSFET, IGBT CONSTRUCTION. THE DRIVE UNIT IS IN GOOD, LIGHTLY USED CONDITION WITH MINOR SCUFFS AND SCRATCHES FROM THE PREVIOUS INSTALLATION. THE DRIVE UNIT WAS REMOVED FROM A DECOMMISSIONED MACHINE. THE UNIT POWERS ON. NO FURTHER TESTING WAS PERFORMED AFTER REMOVAL. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN.

INTRALOX SERIES 2400 ACETAL CONVEYOR CHAIN 8.0560' LONG X 13" WIDE - MANUFACTURER: INTRALOX MODEL: 2400 CONDITION: NEW OTHER. COMES IN NON ORIGINAL PACKAGING. THE ITEM IS UNUSED WITH SOME SHELF WEAR ON THE ORIGINAL PACKAGING FROM PROLONGED STORAGE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) INTRALOX 2400 SERIES 8.0560' L X 13" W FLUSH GRID CONVEYOR CHAIN SPECIFICATIONS: MANUFACTURER: INTRALOX MODEL: SERIES 2400 POLYPROPYLENE CONVEYOR CHAIN LENGTH: 8.0560' WIDTH: 13" HEIGHT: 12.03 MM 2.2 RADIUS FLUSH GRID 42% OPEN AREA 23% PRODUCT CONTACT AREA OPENING SIZE: .35" X.30" HINGE DRIVEN PITCH: 1" NOMINAL TAB INDENT: 0.35" SKU: S02B032 2J-01-06(1) 18LBS - 16IN X 12IN X 12IN

1994 NEFF 2-TON 3PH HYDRAULIC PRESS SAFETY-LIGHT-CURTAINS ADJ-PRESS/SPEED 7"-TRAVEL I S/N: P9979. THIS ITEM COMES IN NON-ORIGINAL PACKAGING. IT HAS SCUFFS, SCRATCHES, SURFACE RUST, AND GREASE RESIDUE FROM NORMAL USE. THE TRIAD MICROGUARD DOES A SELF-TEST THEN DISPLAYS "RDY" (READY). THE SAFETY LIGHT CURTAINS WORK, STOPPING THE RAM FROM MOVING WHEN THE LIGHT PATH IS CROSSED. THE LEFT ELECTRICAL BOX WITH THE FAULT CODE DISPLAY IS ON. THE PRESSURE GAUGE IS BAD, IT DOESN'T INDICATE THE AMOUNT OF PRESSURE. THE PRESSURE HAS AN ADJUSTMENT DIAL, THOUGH IT IS RUSTED AND CAN NOT BE TURNED, SO WE COULD NOT MEASURE THE TONNAGE. THE SPEED CONTROL DIAL FOR THE RAM WORKS WELL BY VARYING THE SPEED AS THE DIAL IS TURNED. THERE ARE CUTS IN THE OUTER INSULATION OF THE POWER CORD THOUGH THERE ARE NO SIGNS OF BARE WIRES, AS SEEN IN THE IMAGE. NO FURTHER TESTING WAS PERFORMED. ******* CHECK FOR CORRECT ROTATION OF THE MOTOR ********* NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) NEFF 2-TON 3PH HYDRAULIC PRESS SAFETY-LIGHT-CURTAINS ADJ-PRESS/SPEED 7"-TRAVEL I SPECIFICATIONS: MANUFACTURER: NEFF MODEL: UNKNOWN SN: P9979 DATE: 11/94 TONNAGE: 2 TON / 2300 PSI RAM TRAVEL: 7" SAFETY LIGHT CURTAINS PRESSURE ADJUSTMENT PRESSURE GUAGE SPEED ADJUSTMENT OPERATING PRESSURE: 300 - 2300 PSI 2 HP 230/460VAC 60 HZ 3 PHASE WORK AREA/BASE(WITHOUT NOTCH): 10-1/2"D X 11-1/2"W NOTCH: 2"W X 4-1/4"D SKU: V21L010 5K-13-01(1) 920LBS - 48IN X 40IN X 73IN

HILTI 3582032 7/8-INCH CARBIDE REBAR CUTTER 1/2-IN STRAIGHT SHANK 12-IN L. MANUFACTURER: HILTI MODEL: 3582032 ALTERNATE NO: 3008913 DESCRIPTION: CARBIDE REBAR CUTTER SIZE: 7/8" LENGTH: 12" SHANK: 1/2" STRAIGHT RELIEF HOLE: YES

[4" HEAVY-DUTY SWIVEL CASTERS] STEEL ROLLING CASTER WHEELS W/ 2 LOCKING (4) - MANUFACTURER: UNKNOWN MODEL: DOES NOT APPLY CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THE CASTERS ARE IN USED CONDITION WITH SCUFFS, SCRATCHES, AND SOME RESIDUE FROM PREVIOUS USE. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: THE CASTERS WERE REMOVED FROM DECOMMISSIONED MACHINES. THE WHEELS ROLL AND THE SWIVEL BASE WORKS AS INTENDED. NO FURTHER TESTING WAS PERFORMED AFTER REMOVAL. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (4) SWIVEL TYPE TWO LOCKING TWO NON-LOCKING STEEL ROLLING CASTER WHEELS SPECIFICATIONS: MANUFACTURER: UNKNOWN MODEL: DOES NOT APPLY DESCRIPTION: SWIVEL TYPE TWO LOCKING TWO NON-LOCKING STEEL ROLLING CASTER WHEELS SWIVEL TYPE WHEEL DIAMETER: 4" WHEEL WIDTH: 1.25" TOTAL HEIGHT: 5" BASE DIMENSIONS: 3.75" X 2.50" BOLT HOLE WIDTH: 2.75" X 3.75"

[170] SOUTHWELD 12N02 3/8" CERAMIC CUP FOR 17 & 18 TORCHES - MANUFACTURER: SOUTHWELD MODEL: 12N02 DESCRIPTION: CERAMIC WELDING CUP 3/8" FOR #17 & #18 TORCHES SKU: U50H033 1B-15-04(1) 16LBS - 18IN X 12IN X 12IN

[SCHAFFNER] FN356-25-33 440/250VAC 50/60HZ 3X25A @40C POWER LINE FILTER

EDWARDS PUMP QDP40 AND MOTOR EDWARDS D90L PUMP

2021 MILLER'S FEEDING SYSTEMS 3360 VIBRATORY FEEDING SYSTEM HOPPER, 24"BOWL, LINEAR FEEDERS, REO CONTROLLER. THIS SYSTEM IS IN GOOD COSMETIC CONDITION. IT SEEMS THE PREVIOUS OWNER WAS A SYSTEMS INTEGRATOR WHO HAD AN ORDER FALL THROUGH. WE THINK THIS HAS NEVER SEEN SERVICE IN A PRODUCTION ENVIRONMENT. THERE ARE SOME SCUFFS AND SCRATCHES AND MINOR WHITE RESIDUES ON THE BLACK PAINT. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS UNIT IS IN GOOD WORKING CONDITION. WHEN WE PLUGGED IT IN AND ALIGNED THE TRACK SENSOR, ALL THREE VIBRATORY SYSTEMS STARTED RUNNING. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) MFS #3360 FEEDING SYSTEM (1) SET UP AND INSTRUCTION MANUAL (1) REO-USA REOVIB MTS 443 MANUAL SPECIFICATIONS: MANUFACTURER: MILLER'S FEEDING SOLUTIONS, INC. VIBRATORY FEEDING SYSTEM 24" SQUARE HOPPER FEEDS BOWL, BOWL FEEDS LINEAR CONVEYOR MAGNETIC VIBRATORY FEEDERS ON HOPPER, BOWL, LINEAR CONVEYOR BOWL NOMINAL DIAMETER: 24" BOWL HAS 2 COILS DESIGNED TO FEED 18 PARTS/MINUTE DESIGNED TO FEED NOZZLES AS SHOWN IN DRAWING STAINLESS STEEL INLINE TRACK, HOPPER SWING ARM BOWL LEVEL SENSOR FOR HIGH-LEVEL SHUTOFF OUTPUT CONVEYOR: 50" LONG INPUT HOPPER: 24" SQUARE OVERALL HEIGHT: ABOUT 85" TO TOP OF DOOR BRACES CLEAR LEXAN PANELS ON ALL SIDES OF BOWL ENCLOSURE 3/8" THICK HINGED LID WITH LATCH CONTROLLER: REO REOVIB MTS443 3-CHANNEL THYRISTOR CONTROLLER FOR VIBRATORY FEEDERS CONTROLS HOPPER, BOWL, AND LINEAR FEEDER 3 SENSOR INPUTS FOR TRACK AND AIR JET CONTROL (NO AIR JETS ARE FITTED) MANUFACTURED: DECEMBER 2021 SKU: X19D003 6-BILR2(1) 2500LBS - 86IN X 55IN X 93IN

[CELERITY UNIT UFC-8565C] MASS FLOW CONTROLLER (AR / 1 SLM) MANUFACTURER: CELERITY MODEL: UFC-8565C PROCESS GAS: AR (ARGON) FLOW RATE: 1,000CC (1 SLM) SEALS: DOWNPORT - C SEALS INTERFACE: DEVICENET (5 PIN "M8") MOUNTING POSITION: HORIZONTAL OR VERTICAL FOOTPRINT: 1.125" SURFACE FINISH: 4 INCH RA

[INTELLIROL TWG] MOTORIZED 10' ROLLER CONVEYOR W/ (4) ID ITOH DENKI HB-510P CARDS. CONDITION: USED. THIS CONVEYOR IS IN GOOD COSMETIC CONDITION WITH SCUFFS, SCRATCHES, AND DINGS FROM REGULAR INDUSTRIAL USE. THERE IS TAPE ON THE ROLLERS COLLECTED FROM TIME CONVEYING PACKAGES WITH TAPE. COMES IN NON-ORIGINAL PACKAGING. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: WE SUPPLIED 24VDC POWER TO THE CHAIN OF DRIVER CARDS AND OBSERVED THE ROLLER ROLL IN SECTIONS WHEN THE SENSOR INDICATED PASSAGE. WE SIMULATED THIS BY PLACING OUR HANDS IN FRONT OF EACH SENSOR INDIVIDUALLY. THE SENSORS ALL LIT UP ORANGE AND THEN TURNED GREEN WHEN INITIATED. NO ADDITIONAL TESTING WAS PERFORMED. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) INTELLIROL TWG MOTORIZED ROLLER CONVEYOR 10' (4) ID ITOH DENKI HB-510P CARDS. MANUFACTURER: INTELLIROL / TWG MODEL: M6020549 / HB-510P DESCRIPTION: MOTORIZED ROLLER CONVEYOR W/ ZPA HYBRID DRIVE CARDS 10' CONVEYOR LENGTH 37" TOTAL CONVEYOR WIDTH 24" CONVEYOR HEIGHT W/ 6" OF ADJUSTMENT AVAILABLE 33-1/2" ROLLER LENGTH 2" ROLLER DIAMETER TAG: P500 DESC: BED.ITR-34B5-HB-CZ-3RC-002-RH 10'O"FE60-4MR CBC1226215* (4) ITOH DENKI HB-510P HYBRID DRIVE CARDS 24VDC ADJUSTABLE SPEED (5) OPTICAL DRIVE SENSORS SKU: X36H002 6-BILR2(1) 500LBS - 128IN X 45IN X 32IN

[CLARAGE] [TWIN-CITY BALDOR] 7.5HP 3PH MARINE-DUTY CENTRIFUGAL EXHAUST CI FAN BLOWER S/N: 990417-901 MAX. SAFE RPM 4675 AT 200 DEGREES. BLOWER: MANUFACTURER: CLARAGE / TWIN CITY FAN & BLOWER MODEL: 7 1100 CI FAN. HEAVY-DUTY MOTOR: MANUFACTURER: BALDOR CAT #: N752 SUPER-E MARINE DUTY MOTOR PREMIUM-EFFICIENT INDUSTRIAL MOTOR ISR 3 PHASE SINGLE VOLTAGE VOLTAGE: 460V 8.6 AMPS FRAME: 213T 7.5HP 60 HZ 3525 RPM CLASS: F BEARINGS.

1/4 YARD TILT TRUCK

[INGERSOLL-RAND IR SIERRA-L75] INGERSOLL-RAND IR SIERRA-L75 75-HP ROTARY-RECIP COMPRESSOR OIL-FREE 340-CFM 3PH 460 SPECIFICATIONS: MANUFACTURER: INGERSOLL-RAND IR MODEL: SIERRA-L75 SN: TS0503U96131 CAPACITY: 340 CFM RATED OPERATING PRESSURE: 100 PSIG MAX. DISCHARGE PRESSURE: 103 PSIG NOMINAL DRIVE MOTOR: 75 HP NOMINAL FAN MOTOR: 5.5 HP TOTAL PACKAGE AMPS: 102 VOLTS: 460 PHASE/HERTZ: 3/60 CONTROL VOLTAGE: 120 50-100 HP SIERRA INTELLISYS CONTROLLER: PART NO.: 39842356 SN: 00113 96023 GCE RATINGS: INPUT - ELECTRICAL 120VAC OUTPUT: TRIACS TX1 THRU TX3 - 120V, 3.75A TRIACS TX4 - THROUGH TX6 - 120V, 2.5A MAX. SKU: W13L005 6-BILR1(1) 5000LBS - 98IN X 62IN X 81IN. FOR PARTS OR NOT WORKING. THIS ITEM COMES IN NON-ORIGINAL PACKAGING. IT HAS SCUFFS, SCRATCHES, DINGS, DENTS, AND SOME SURFACE RUST ON SOME OF THE PANEL EDGES FROM NORMAL USE. WHEN POWER WAS APPLIED THE CONTROLLER PARTIALLY TURNED ON. IT INITIALIZED, "CHECKING MACHINE" AND THEN STATED "READY TO START", THOUGH THE POWER AND UNLOAD/LOAD LIGHTS DID NOT COME ON WHICH THEY SHOULD OF AT THAT POINT. THE "POWER ON" LIGHT LOCATED ON THE INSIDE PANEL BOARD IS ON. WE TRIED DEPRESSING THE START BUTTON AND THE OTHER BUTTONS ON THE CONTROLLER PANEL BUT NOTHING WAS ACTIVATED. WE EVEN TRIED MANUALLY DEPRESSING THE FIRST (ON THE LEFT HAND SIDE) CONTACTOR ON BUT STILL NOTHING HAPPENED. AT THAT POINT NOTHING CHANGED THE STATUS OF THE CONTROLLER EXCEPT THE EMERGENCY STOP BUTTON WHICH SHUT IT DOWN, STATING "EMERGENCY STOP", MESSAGES SEEN IN THE IMAGES. THE CONTINUITY OF THE CONTACTORS WHERE FINE, THE FUSES AND VOLTAGES AS FAR AS WE COULD TRACE THEM WERE GOOD, SO WE THINK IT MAY BE AN ISSUE WITH THE INTELLISYS CONTROLLER BUT STILL ARE NOT SURE. ONE OF THE FRONT DOOR PANELS HAS A BROKEN LATCH. TWO OF THE THREE GAUGES HAVE CLOUDY PLASTIC SO IT IS HARD TO READ THEM. WE ARE NOT SURE IF THEY CAN BE CLEANED. NO FURTHER TESTING WAS PERFORMED. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) INGERSOLL-RAND SIERRA-L75 75-HP ROTARY-RECIP COMPRESSOR OIL-FREE 340-CFM 3PH 460

[TIG STAR] TIG STAR TIG54N14 #8 ALUMINA TIG TORCH GAS LENSE CUP (30) MANUFACTURER: TIG STAR MODEL: TIG54N14 DESCRIPTION: ALUMINA TIG TORCH GAS LENS CUP #8 (17 18 26) SKU: U51H008 1B-08-02(1) 3LBS - 7IN X 7IN X 7IN

[MACHINE ENGINEERING CORPORATION MEG] X6085 PICK AND PLACE UNIT LONG STROKE: 200MM X HORIZONTAL, 50MM Z VERTICAL HIGH SPEED, HIGH ACCURACY, COMPACT FOOTPRINT (80MM BODY WIDTH, 210MM WIDE WITH ALL FITTINGS) "CENTER CARRY" TYPE, ARM IS LOCATED IN THE BODY FOR COMPACT CONFIGURATION CAM DRIVE ELIMINATES COMPLICATED CONTROLLERS AND PNEUMATICS SMOOTH, PRECISE CARRY MOTION BALL BUSHINGS SIMPLE 1-WRENCH HEAD ADJUSTMENTS MOTOR: ORIENTAL MOTOR 5IK40GN-SW2M 200-230V 60HZ/50HZ 3PHASE AC MAGNETIC HOLDING BRAKE (BRAKE SETS IF POWER IS LOST GEARHEAD: ORIENTAL MOTOR 5GN15K ENCODER: A58HB-10SQ-1200SIAGV4-RMK SKU: X18D004 MACHINE ENGINEERING MEG X6085 PPU PICK AND PLACE UNIT 200MM HORIZ. 50MM VERT. 64LBS - 36IN X 25IN X 13IN

CONVEYOR TECHNOLOGIES PCB MAGAZINE LOADER AND UNLOADER

[GRIZZLY INDUSTRIAL G5974] SWIVEL BASE 6" MILLING VISE 360 DEGREE ROTATION W/ HAND CRANK. MANUFACTURER: GRIZZLY INDUSTRIAL, MODEL: G5974, SIZE: 6", TYPE: SWIVEL BASE, CONSTRUCTION: CAST IRON, ROTATION: 360 DEGREES, FEATURES: FINE GRADUATIONS, DROP FORGED HANDLE, PRECISION GROUND JAW FACES, ENCLOSED ACME SCREW AND DETACHABLE SWIVEL BASE. SKU: Y22B006 2F-06-02(1) 69LBS - 25IN X 19IN X 13IN

CONVEYOR TECHOLOGIES .5 METER PCB INSPECTION CONVEYOR

2015 EVEST MI-550 4-AXIS LINEAR/ROTARY ROBOT MODULE 37/35/5CM TRAVEL IRONLESS MOTORS WITH DRIVES. MOTION ASSEMBLY FROM AN MI550 LAMINATOR WITH 4 AXES OF MOTION (3 LINEAR, 1 ROTATION). HORIZONTAL TRAVEL: 37 X 33 CM (POTENTIALLY 37X40CM WITH BUMPER BRACKET CHANGE). VERTICAL TRAVEL: 5 CM. ROTARY TRAVEL: UNLIMITED. MODULAR CONSTRUCTION. X AXIS: 33 (OR 40?) CM LINEAR MOTION GUIDES: THK SHS15 HNBR, LINEAR ENCODERS: HEIDENHAIN, MOTOR: ACCEL TECHNOLOGIES EHU1-01, MAGNET TRACKS: (2) ACCEL MLFT-300-00, DRIVE: SERVOTRONIX CDHD-0032AAF1 (INPUT: 120/240V 1PHASE 50/60HZ 5A, OUTPUT: 0-240V 3PHASE 0-1000HZ 3A, 440VA @ 120VIN, 740VA @ 240VIN). Y AXIS: 37 CM LINEAR MOTION GUIDES: THK SHS15 HNBR, LINEAR ENCODERS: HEIDENHAIN, MOTOR: ACCEL TECHNOLOGIES EHU1-01, MAGNET TRACKS: ACCEL MLFJ-300-00, DRIVE: SERVOTRONIX CDHD-0032AAF1 (INPUT: 120/240V 1PHASE 50/60HZ 5A, OUTPUT: 0-240V 3PHASE 0-1000HZ 3A, 440VA @ 120VIN, 740VA @ 240VIN). Z AXIS: 5 CM, SPRING-LOADED TO STAY 'UP', MOTOR: DELTA ECMA-C10401PS SERVO MOTOR (320 WATTS), DRIVE: DELTA ELECTRONICS ASD-A2-0121-L (INPUT: 200-230V 1 OR 3PHASE 50/60HZ 0.39/0.69A, OUTPUT: 110V 0-250HZ 0.9A). THETA AXIS: UNLIMITED ROTATION, EXTENDS ABOUT 1CM WITH A PNEUMATIC CYLINDER, SPRING-LOADED TO STAY 'UP', INCLUDES A HOME POSITION OPTICAL SWITCH, MOTOR: YASKAWA SGMAV-A5ADA61 SERVO MOTOR (50 WATTS, RATED SPEED: 3000RPM, TORQUE RATING: 0.159N-M, ORDER NUMBER: 3P6449-6-31), DRIVE: YASKAWA SGDV-R70A01B (INPUT: 3PHASE AC 200-230V 50/60HZ 0.3A, OUTPUT: 3PHASE AC 0-230V 0-500HZ 0.66A 50W, ORDER NUMBER: 2P9750-1-32). NOTABLE FEATURES: SMC ITV2030-312L ELECTRO-PNEUMATIC REGULATOR, VARIOUS AIR TUBING SIZES, AIR NOZZLE SPRAYS FROM ROTARY AXIS BOTTOM, (3) MOTOR DRIVES WITH EXTERNAL BRAKING RESISTORS, ETHERNET WIRED TO TOP, STEEL FRAME UNDER LOWEST AXIS, ALUMINUM CHASSIS/PLATE CONSTRUCTION, FITS INSIDE A VOLUME ABOUT 31" X 25" X 33"H.

ULINE ROLLING TOTE 48X30X30 GOOD CONDITION

[UNKNOWN] INDUSTRIAL SWIVEL TWO LOCKING TWO NON-LOCKING CART CASTER WHEELS (4) - MANUFACTURER: UNKNOWN MODEL: DOES NOT APPLY CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THE CASTERS ARE IN USED CONDITION WITH SCUFFS, SCRATCHES, AND RESIDUE FROM PREVIOUS USE. ON ONE OF THE LOCKING CASTERS THERE IS A SMALL PIECE MISSING FROM THE WHEEL HOWEVER, THE WHEEL STILL ROLLS WITHOUT ISSUE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THE CASTERS WERE REMOVED FROM DECOMMISSIONED MACHINES. THE WHEELS ROLL AND THE SWIVEL BASE WORKS AS INTENDED. NO FURTHER TESTING WAS PERFORMED AFTER REMOVAL. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (2) INDUSTRIAL SWIVEL LOCKING CART CASTER WHEELS (2) INDUSTRIAL SWIVEL NON-LOCKING CART CASTER WHEELS SPECIFICATIONS: MANUFACTURER: UNKNOWN MODEL: DOES NOT APPLY DESCRIPTION: INDUSTRIAL INDUSTRIAL SWIVEL CART CASTER WHEELS TWO LOCKING TWO NON-LOCKING WHEEL DIAMETER: 4 " WHEEL WIDTH: 1" TOTAL HEIGHT: 5" SHAFT LENGTH: 1.25" SHAFT DIAMETER: 4/8"

[NEW] CRAIN 423 SPREADING TROWEL 11" X 4.5" V-NOTCHED 1/8 X 1/16 X 1/8 DEEP - MANUFACTURER: CRAIN MODEL: 423 CONDITION: NEW OTHER. COMES IN FACTORY ORIGINAL PACKAGING. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (9) CRAIN NO. 423 PROFESSIONAL TROWELS SPECIFICATIONS: MANUFACTURER: CRAIN MODEL: 423 DESCRIPTION: PROFESSIONAL NOTCHED TROWEL BLADE MATERIAL: HARDENED SPRING STEEL HANDLE TYPE: CURVED HARDWOOD TROWEL SIZE: 11.00" X 4.50" CONDITION: NEW QUANTITY: 9 TROWELS SKU: O15P020 1B-02-04(1) 9LBS - 22IN X 15IN X 8IN

SEALED AIR SPA-0475-001 19.5"W X 83.4375" WHITE PLASTIC/FABRIC CONVEYOR BELT. SEALED AIR PRODUCTS SPA-0475-001 83.4375"L X 19.5"W WHITE CONVEYOR BELT. DISCHARGE CONVEYOR BELT MATERIAL: FABRIC UNDERSIDE, PLASTIC TOP-COMPOUND COLOR: WHITE LENGTH: 83.375" WIDTH: 19.5"

[AIR TECHNIQUES] [AIRSTAR 2-2] DENTAL AIR COMPRESSOR SYSTEM 230V, 60 HZ, 1740 RPM. CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THIS AIR COMPRESSOR IS IN GREAT CONDITION WITH MINOR SCUFFS AND SCRATCHES FROM PREVIOUS USE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: WHEN POWER WAS APPLIED, THIS ITEM RAN VERY SMOOTHLY. IT BUILT UP PRESSURE AND HELD IT WITH NO PROBLEMS. NO FURTHER TESTING WAS PERFORMED. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) AIR TECHNIQUES AIRSTAR 2-2 DENTAL AIR COMPRESSOR SYSTEM 230V, 60 HZ, 1740 RPM SPECIFICATIONS: MANUFACTURER: AIR TECHNIQUES MODEL: AIRSTAR 2-2 DESCRIPTION: DENTAL AIR COMPRESSOR SYSTEM MOTOR: 230V 60 HZ 1640 RPM 1.10 KW 0.72 PF 9.50 A TANK: COMPRESSOR HEAD SINGLE 1.5 HP CFM @ 80PSI (CUBIC FT./MIN) 5.0 TANK SIZE (GALLONS) 12 VOLTAGE RATING (V) 220 VOLTAGE (MIN/MAX) 198/242 PANEL BREAKER (A) 20 WIRE SIZE (GAUGE) 12 SKU: X15S018 5F-06-01(1) 225LBS - 48IN X 40IN X 36IN

2006 UNBRANDED STANDALONE CONVEYOR 1M WIDE 1" BELT OPEN CENTER STANDALONE CONVEYOR W/ BECKHOFF CONTROL COMPUTER. THIS UNIT IS IN FAIR COSMETIC CONDITION. THERE IS SOME WEAR IN A COUPLE OF PLACES ON TOP OF THE CONVEYOR BASE, A FEW SPOTS WHERE PAINT IS SCRATCHED UNDER THE CONTROL PANEL, SOME SCRATCHES IN BLACK PLASTIC AROUND THE HMI, AND THE WIRE LOOM IS FALLING DOWN INSIDE FROM THE ADHESIVE THAT HELD UP THE LITTLE CLIPS, NOT HOLDING UP ANY MORE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: WE WERE ABLE TO RUN THE CONVEYOR IN BOTH DIRECTIONS, RUN THE WIDTH ADJUSTMENT BOTH DIRECTIONS, OPERATE THE GRIPPERS AND STOPS, AND VERIFY OPERATION OF ALL PRODUCT SENSORS. WE USED 120V POWER FOR TESTING AND FOUND THE UNIT FUNCTIONAL BUT CAN'T GUARANTEE IT WILL WORK ON OTHER THAN 200-230V POWER. WE NOTED THE COMPUTER HAS AN INTERNAL CLOCK SET AT 2006, WHICH MAY MEAN THE BIOS BATTERY HAS DIED. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) 1M OPEN-CENTER EDGE BELT CONVEYOR SPECIFICATIONS: OPEN-CENTER EDGE-BELTED CONVEYOR 1M TOTAL LENGTH RIGHT-TO-LEFT OR LEFT-TO-RIGHT MANUAL AND MOTORIZED WIDTH ADJUSTMENT, 13 TO 57CM CENTER OPENING BETWEEN BELT EDGES 1" WIDE CLOTH-TOPPED BELTS BELTS ARE GEAR DRIVEN BY STEP MOTOR BECKHOFF AS1060-1000 WIDTH ADJUSTMENT DRIVEN BY STEP MOTOR BECKHOFF AS1050-0110 DUAL LINEAR RAILS (52CM LONG), CPC MR9M BEARINGS AND DUAL SCREWS FOR WIDTH ADJUSTMENT ENGRAVED SCALE SHOWS BELT OPENING WIDTH OPTICAL SWITCHES ON BOTH SIDES OF WIDTH ADJUSTMENT RANGE, LOOKS LIKE COULD BE SET AS NARROW AS 10CM, WIDE AS 63 CM PNEUMATIC PRODUCT STOP "GRIPPERS/TRAY LOCK" CYLINDERS ON BOTH SIDES, (FESTO DFM-20-20-P-A-GF) HAVE NO FINGERS TO GRIP PRODUCTS TRAY LOCKS HAVE AUTOSWITCHES FOR UP AND DOWN STOP PIN WITH 10MM STROKE INTERRUPTS PRODUCT FLOW (FESTO ADVC-10-10-A-P-A) (3) OPTICAL PRODUCT SENSORS, SICK WTB2S-SERIES ENTIRE CONVEYOR ASSEMBLY HAS A FLAT BOTTOM PLATE, SIMPLE TO REMOVE/ INTEGRATE IN YOUR SETTING APPROXIMATELY 15.5CM FROM BOTTOM OF PLATE TO TOP OF CONVEYOR BELTS CONTROLLED BY BECKHOFF CX9020-0115/U900 INDUSTRIAL PC WITH WINDOWS 7 USER-FRIENDLY USER INTERFACE HMI IS A COLOR TOUCH SCREEN BECKHOFF CP2907 FESTO PNEUMATICS LARGE OPENING UNDER CONVEYOR BASE CABINET CONTAINS ELECTRONICS, OTHERWISE EMPTY POWER REQUIREMENT: 200-230V 1PHASE 50/60HZ 1.2KW WHEELS FOR EASY RELOCATION, ADJUSTABLE LEGS SKU: X28D006 5A-17-02(1) 235LBS - 48IN X 48IN X 48IN

[4] ON-OFF LOCKING INDUSTRIAL 3" SWIVEL TYPE ROLLING CASTER WHEELS (4) - MANUFACTURER: UNKNOWN MODEL: DOES NOT APPLY CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THE CASTERS ARE IN USED CONDITION WITH SCUFFS, SCRATCHES, AND RESIDUE FROM PREVIOUS USE. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: THE CASTERS WERE REMOVED FROM DECOMMISSIONED MACHINES. THE WHEELS ROLL AND FUNCTION AS INTENDED. NO FURTHER TESTING WAS PERFORMED AFTER REMOVAL. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (4) ON-OFF LOCKING INDUSTRIAL 3" SWIVEL TYPE ROLLING CASTER WHEELS SPECIFICATIONS: MANUFACTURER: UNKNOWN MODEL: DOES NOT APPLY DESCRIPTION: ON-OFF LOCKING INDUSTRIAL 3" SWIVEL TYPE ROLLING CASTER WHEELS SWIVEL TYPE LOCKING WHEEL DIAMETER: 3" WHEEL WIDTH: 1 1/8" TOTAL HEIGHT: 4" BASE DIMENSIONS: 3 3/4" X 2 2/4" BOLT HOLE WIDTH: 1 3/4" X 3"

[USED] WRIGHT TOOL 1970 2-3/16" 12-POINT OFFSET HANDLE STRIKING FACE BOX WRENCH. COMES IN NON-ORIGINAL PACKAGING. THIS WRENCH HAS SCUFFS, SCRAPES, AND DINGS, ALONG WITH SOME SPOTS OF RUST AND WEAR ON THE STRIKING HANDLE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS WRENCH WAS REMOVED FROM AN ACTIVE WORKING ENVIRONMENT AND WAS TESTED SUBSEQUENT TO ITS REMOVAL. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) WRIGHT TOOLS 1970 2-3/16" 12-POINT OFFSET HANDLE STRIKING FACE BOX WRENCH SPECIFICATIONS: MANUFACTURER: WRIGHT TOOL MODEL: 1970 DESCRIPTION: 12-POINT OFFSET HANDLE STRIKING FACE BOX WRENCH SIZE: 2-3/16" HEAD DIAMETER: 3-1/2" HEAD THICKNESS: 1-3/8" OAL: 13-1/2" OFFSET: 45-DEGREES SKU: U52U008 5A-08-02(1) 10LBS - 18IN X 8IN X 8IN