Industrial Electronic Manufacturing Process Equipment Parts Tools Day 3 of 3 day event

[KORNIT DIGITAL 06-MPLX-0002] KORNIT DIGITAL 06-MPLX-0002 24VDC RFID MODULE ASSEMBLY OF READER 6 OR 8-ANTENNA. MANUFACTURER: KORNIT DIGITAL, MODEL: 06-MPLX-0002, PART NUMBER: 06-EBRD-0004, PASSIVE RFID MODULE DESIGNED BY LOGITAG, VOLTAGE RATING: 24 VDC (PSU NOT INCLUDED), OPERATION FREQUENCY: 14.56 MHZ, ANTENNAS: (8) LT-HF-ANT-4060, INTERFACE: RS-232 SERIAL, FCC ID: 2AGY2RFIDBULKSYS. CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THE MODULE IS IN GOOD, USED CONDITION WITH MINOR SCUFFS FROM PREVIOUS USE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THE MODULE WAS REMOVED FROM A DECOMMISSIONED MACHINE. NO FURTHER TESTING WAS PERFORMED AFTER REMOVAL. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. SKU: Y19B024 1E-01-02(1) 2LBS - 8IN X 8IN X 4IN

[50] TECHNIWELD 57N75 #6 CERAMIC TIG NOZZLE 3/8" LARGE DIA. CERAMIC TIG GAS LENS CUP NOZZLE #6 3/8" SKU: U51H016 1C-01-02(2) 5LBS - 10IN X 10IN X 10IN

[UNBRANDED] [5VX1000] HY-T WEDGE SC COGGED V-BELTS (5) - MANUFACTURER: UNBRANDED MODEL: 5VX1000 CONDITION: NEW. THESE BELTS COME IN NON-ORIGINAL PACKAGING. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (5) HY-T WEDGE 5VX1000 MATCHMAKER SC COGGED V-BELTS SPECIFICATIONS: MANUFACTURER: UNBRANDED MODEL: 5VX1000 HY-T WEDGE V-BELTS MATCHMAKER SC TYPE: COGGED OUTSIDE LENGTH: 100" WIDTH: 5/8" SKU: S22E001 2D-02-04(2) 7LBS - 16IN X 12IN X 8IN

[AIR TOOL] AIMCO-URYU US-40TP PNEUMATIC PISTOL GRIP 1/4" AIR SCREWDRIVER/NUTRUNNER DRIVER - MANUFACTURER: AIMCO URYU MODEL: US-40TP 1/4" HEX PISTOL GRIP STYLE PUSH TO START REVERSE PUSH BUTTON. TESTED AND CONFIRMED WORKING IN FORWARD AND REVERSE POSITIONS. SKU: Q12U031 4C-01-02(1) 5LBS - 10IN X 10IN X 5IN

[DAIHEN MDC-01C CPI CONT BOX 1P 200V 1A - REFURBISHED BY MANUFACTURER W/ REPORT] CPI BOX HAS SOME SCUFFS AND SCRATCHES FROM NORMAL USE, BUT NOTHING SIGNIFICANT THAT WOULD AFFECT FUNCTIONALITY. THE DAIHEN CHECK AND REPAIR REPORT IS INCLUDED IN A SEALED PLASTIC SLEEVE. THIS CPI BOX HAS BEEN REFURBISHED BY THE MANUFACTURER AND INCLUDES THE SEALED CHECK AND REPAIR REPORT. NO ADDITIONAL TESTING HAS BEEN PERFORMED. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) DAIHEN MDC-01C CPI CONT BOX 1P 200V 1A - REFURBISHED BY MANUFACTURER W/ REPORT SPECIFICATIONS: MANUFACTURER: DAIHEN MODEL: MDC-01C DESCRIPTION: CPI CONT BOX REFURBISHED BY MANUFACTURER 1 PHASE 200V 1A TOKYO ELECTRON PN: ES3D80-001918R22 SKU: T08H015 1D-06-04(1) 16LBS - 25IN X 19IN X 12IN

[ROACH CONVEYORS] PRIMO SORT PNEU/ELECTRIC BOX PUSHER EXTENDS:16" 75/MIN HI-SPEED SORTER: MANUFACTURER: ROACH CONVEYORS MODEL: PRIMO SORT HIGH SPEED: UP TO 75 SORTS PER MINUTE GREEN BASE: 57" X 12" CYLINDER: MANUFACTURER: PARKER 4MA SERIES ENVELOPE PRESSURE: 250 PSI AIR VALVE: MANUFACTURER: MAC MODEL: MV-A2B-A111-PM-591CA PUSHER: DIMENSIONS: 12" X 5" EXTENDS: 16" ELECTRICAL: +- 24VDC SINGLE SOLENOID 2 HALL EFFECT SENSORS AIR REGULATOR & FILTER: MANUFACTURER: SMC MODELS: AL30-N03-Z / AW30-N03-Z

[STEAMIN DEMON XL-20] HIGH FLOW EXTRACTOR CARPET CLEANER WITH HOSES, SPARE PARTS. THIS SYSTEM IS IN FAIR COSMETIC CONDITION. THERE ARE RESIDUES FROM PRIOR USE, BUT NOTHING CRAZY. THERE ARE ODORS BUT THEY ARE NOT VERY BAD. THE DRAIN LINES ALL HAVE VISIBLE GOO IN THEM. THE SUMP INSIDE THE VACUUM HAS DEPOSITS BUT NOT THE KIND FROM WHEN NOBODY EVER CLEANS A MACHINE. THE CLEAR HOSES ON THE MACHINE WERE RECENTLY REPLACED. WE DID NOT INVENTORY THE SPARES. THERE IS A LOT OF CLEAR TUBING, A BUNCH OF GASKETS, A COUPLE OF VALVES, A FLOAT VALVE, SOME PUMP REBUILD PARTS, SEVERAL FILTER BAGS, SOME HARDWARE AND MORE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. WE VERIFIED THE SUCTION SUCKS, AND WE HEARD THE VALVES ALL CLICKING WHEN THEIR SWITCHES WERE PRESSED. WE DID NOT DO A WET TEST. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) STEAMIN' DEMON II FLOOR CLEANER (1) SUPPLY AND DRAIN WITH EXTENSION CABLE/HOSE SET PILE OF SPARE PARTS SPECIFICATIONS: MODEL: STEAMIN DEMON XL-20 HIGH-FLOW EXTRACTOR PROFESSIONAL-GRADE CARPET CLEANING MACHINE "20 INCHES" WIDE (ABOUT 19.5") AUTOMATIC FILLING AUTOMATIC DRAINING/DUMPING ACCEPTS DISPOSABLE FILTER BAGS HIGH WATER FLOW RATE FOR GREATLY INCREASED SOIL REMOVAL EXCELLENT WATER RECOVERY, DRY TIME <2 HRS! PORTABLE, LIGHTWEIGHT MACHINE POWER: 115V (NORMAL POWER OUTLET) SKU: X23D004 5F-06-01(1) 160LBS - 48IN X 40IN X 56IN

UNI-CHAINS XLB HEAVY DUTY TABLE TOP INDUSTRIAL CONVEYOR CHAIN 10.35' - MANUFACTURER: UNICHAINS MODEL: XLB CONDITION: USED. COMES IN NON ORIGINAL PACKAGING. THE CONVEYOR CHAINS ARE IN USED CONDITION WITH SCUFFS AND SCRATCHES FROM PREVIOUS USE. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: THE CHAINS WERE REMOVED FROM A DECOMMISSIONED ENVIRONMENT. THE UNIT BENDS AND FLEXES AS INTENDED. NO FURTHER TESTING WAS PERFORMED AFTER REMOVAL. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) UNI-CHAINS XLB 10.35' LONG HEAVY DUTY INDUSTRIAL CONVEYOR CHAIN SPECIFICATIONS: MANUFACTURER: UNI-CHAINS MODEL: XLB HEAVY DUTY INDUSTRIAL CONVEYOR CHAIN LENGTH: 10.35' WIDTH: 3 1/8" HEIGHT: 1 1/8" MATERIAL: PLASTIC COLOR: BLACK WITH RED PINS

[VACMATIC INTERNATIONAL LIMITED SP08 265 DEK] SCREEN PRINTER VACUUM GENERATOR 230VAC 2000W. THIS VACUUM IS IN FAIR TO GOOD COSMETIC CONDITION WITH SCUFFS AND SCRATCHES FROM USE AND DUST FROM STORAGE. TWO OF THE BOLTS ATTACHING THE CONTROL CONSOLE ARE MISSING. THERE ARE NO HOSES INCLUDED. COMES IN NON-ORIGINAL PACKAGING. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. WE PLUGGED IN THIS VACUUM AND CONFIRMED THAT THE UNIT PULLS AIR THROUGH THE INTAKE AND EXPELS IT THROUGH THE EXHAUST. THE VARIABLE SPEED CONTROL KNOB DOES NOT FUNCTION AND WE CAN NOT CONFIRM WHAT SPEED IT IS LOCKED INTO, BUT IT DOES BLOW FIRMLY. THE HOUR USE INDICATOR SHOWS OVER 5900 HOURS OF USE, BUT WE COULD NOT CONFIRM THAT THE INDICATOR IS FUNCTIONING AS THE DIAL DID NOT ROLL AS WE RAN THE VACUUM. NO FURTHER TESTING WAS PERFORMED. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) VACMATIC INTERNATIONAL SP08 265 DEK SCREEN PRINTER VACUUM GENERATOR 230VAC 2000W SPECIFICATIONS: MANUFACTURER: VACMATIC INTERNATIONAL LIMITED MODEL: SP08 265 DEK DESCRIPTION: SCREEN PRINTER VACUUM GENERATOR 230VAC 2000W SKU: W20H002 5A-10-01(1) 180LBS - 48IN X 40IN X 42IN

[CLECO] US-LT20B-10 PNEUMATIC INLINE 1/4" AIR SCREWDRIVER/NUTRUNNER - MANUFACTURER: CLECO MODEL: US-LT20B-10. THE SCREWDRIVER IS IN GOOD COSMETIC CONDITION WITH MINOR WEAR FROM PREVIOUS USE. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). OUR TESTS INCLUDED PLUGGING IN THE SCREWDRIVER INTO AN AIR LINE HOSE. THE SCREWDRIVER WORKED GREAT IN THE FORWARD POSITION WHEN PUSHED DOWN. WHILE PUSHING DOWN AND PRESSING REVERSE BUTTON, REVERSE WORKED AS WELL WITH NO ISSUES. NO FURTHER TESTING WAS PERFORMED. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) AIMCO URYU US-LT20B-10 INLINE AIR PNEUMATIC SCREWDRIVER SPECIFICATIONS: MANUFACTURER: CLECO MODEL: US-LT20B-10 DRIVE TYPE: 1/4" HEX MIN TORQUE: 7.1 IN MAX TORQUE: 9.7 FT LB MAX TORQUE: 9.7 IN LB MIN TORQUE: 0.15 NM MAX TORQUE: 1.10 NM STYLE: INLINE CLUTCH TYPE: AUTO SHUT OFF TRIGGER TYPE: PUSH TO START SKU: Q11U020 1B-15-03(2) 3LBS - 14IN X 8IN X 4IN

[PHOENIX INTERNATIONAL] DRYROD II TYPE 1 ELECTRODE STABILIZING OVEN 10LB CAPACITY 300F PRESET - MANUFACTURER: DRYROD II MODEL: DRYROD II CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THE OVEN IS IN HEAVILY USED CONDITION WITH SCUFFS, SCRATCHES, AND SOME MARKINGS FROM PREVIOUS USE. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: THE OVEN WAS REMOVED FROM A DECOMMISSIONED ENVIRONMENT. THE OVEN POWERED ON. NO FURTHER TESTING WAS PERFORMED AFTER REMOVAL. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) PHOENIX INTERNATIONAL DRYROD II TYPE 1 ELECTRODE STABILIZING OVEN 10LB CAPACITY SPECIFICATIONS: MANUFACTURER: PHOENIX INTERNATIONAL MODEL: DRYROD II TYPE 2 PART NUMBER: 1205500 PORTABLE ELECTRODE STABILIZING OVEN CAPACITY: 10 LB STORAGE CAPACITY FOR 14" OR 18" ELECTRODES INCLUDES ROD ELEVATOR FOR QUICK REMOVAL COLOR: SAFETY YELLOW VOLTAGE: 100-240 VAC SINGLE PHASE TEMPERATURE: 300 F PRESET HEATING ELEMENT: 60 W NO THERMOMETER INSULATION: FIBERGLASS BATT (1.50" CHAMBER DEPTH: 19.75" CHAMBER DIAMETER: 2.88" SKU: U47B021 5B-01-02(7) 13LBS - 27IN X 14IN X 11IN

[NEW] JOGLER LS 10 ARMORED LEVEL GAUGE SINGLE GLASS TUBE 57" LONG (1) JOGLER LS 10 ARMORED LEVEL GAUGE 57" LONG SPECIFICATIONS: MANUFACTURER: JOGLER MODEL: LS 10 ARMORED GLASS LEVEL GAUGE LENGTH: 57" FLOW METER/ INDICATOR PRESSURE RATING: 285 PSIG UNOBSTRUCTED VISIBILITY PATENTED ONE-PIECE SUPERSEAL INSERTS ARE SELF-SEALING MAINTENANCE FREE BOROSILICATE SIGHT TUBING PTFE TEFLON SUPERSEAL INSERTS EPOXY-COATED CARBON STEEL SHIELD AND FLANGES ANSI CLASS 150-LB FLANGES APPROVED BY THE FACTORY MUTUAL SYSTEM (150O F MAX)

MAXI-MOVERS INDUSTRIAL TILT TRUCK YELLOW

UNBRANDED RUBBER COATED CONVEYOR ROLLER W/ FIXED 15MM AXLE 21-3/4" X 60MM GOLD COLOR. MANUFACTURER: UNBRANDED MODEL: DOES NOT APPLY CONDITION: USED. THIS CONVEYOR ROLLER IS IN GOOD COSMETIC CONDITION WITH ONLY MINOR SCUFFS AND SCRATCHES FROM REGULAR INDUSTRIAL USE AND HANDLING. COMES IN NON-ORIGINAL PACKAGING. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: THIS ROLLER WAS REMOVED FROM DECOMMISSIONED EQUIPMENT AND HAS NOT BEEN TESTED. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) UNBRANDED RUBBER COATED CONVEYOR ROLLER W/ AXLE 21-3/4" X 60MM GOLD COLOR SPECIFICATIONS: MANUFACTURER: UNBRANDED MODEL: DOES NOT APPLY DESCRIPTION: RUBBER COATED CONVEYOR ROLLER W/ AXLE TOTAL LENGTH: 21-3/4" (550MM) ROLLER DIAMETER (MAJOR DIA.): 60MM AXEL DIAMETER (MINOR DIA.): 15MM RUBBER THICKNESS: 2MM ROLLER LENGTH: 400MM FIXED AXLE GOLD COLOR RUBBER

KANETIC OPEN-CENTER EDGE CONVEYOR 1 CONVEYOR SECTION CONVEYOR LENGTH: 32" UNBOLT-AND-SHIFT MANUAL WIDTH ADJUSTMENT POWER: 115V AC ALLEN-BRADLEY PLC HAS A FAULT, SOLD AS-IS! SKU: W20D006 5A-18-01(1) 195LBS - 48IN X 40IN X 53IN

[AX54] GATES TRI POWER COGGED V BELTS AX54 (2) AND BX60 (3) - MANUFACTURER: GATES MODEL: AX54 CONDITION: NEW. COMES IN NON ORIGINAL PACKAGING. THE BELTS ARE IN NEW OLD STOCK/ UNUSED CONDITION. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (2) GATES AX54 TRI POWER COGGED V BELTS (3) GATES BX60 TRI POWER COGGED V BELTS SPECIFICATIONS: MANUFACTURER: GATES MODEL: AX54 TRI POWER V BELT TOP WIDTH: 21/32" OUTSIDE LENGTH: 57" OVERALL HEIGHT: 13/32" CONSTRUCTION TYPE: COGGED BAND TYPE: BELT WITH ENDS JOINED MATERIAL: EPDM NUMBER OF RIBS: 1 REINFORCING CORD MATERIAL: POLYESTER OPERATING TEMPERATURE RANGE: -60 TO 250 F RESISTANCE FEATURES: OIL RESISTANT STANDARDS MET: RMA MODEL: BX60 TRI POWER V BELT TOP WIDTH: 21/32" OUTSIDE LENGTH: 63" CONSTRUCTION TYPE: COGGED BAND TYPE: BELT WITH ENDS JOINED MATERIAL: EPDM NUMBER OF RIBS: 1 REINFORCING CORD MATERIAL: POLYESTER OPERATING TEMPERATURE RANGE: -60 TO 250 F RESISTANCE FEATURES: OIL RESISTANT STANDARDS MET: RMA SKU: R50B016 2G-02-06(1) 4LBS - 22IN X 15IN X 6IN

[21CM] 40257 CHUCKING REAMER 22700.1550 (1) [21CM] 40198 CHUCKING REAMER 22700.1255 (2) [21CM] 20100 CHUCKING REAMER 22700.2210 (3) [21CM] 20087 CHUCKING REAMER 22700.1910 MANUFACTURER: 21CM MODEL: DOES NOT APPLY CONDITION: NEW OTHER. COMES IN ORIGINAL OPEN BOX PACKAGING. SOME OF THE CONTAINERS SHOW SOME AGE AND ARE SLIGHTLY TATTERED FROM STORAGE AND HANDLING. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) 21CM 40257 CHUCKING REAMER 22700.1550 (2) 21CM 40198 CHUCKING REAMER 22700.1255 (2) 21CM 20100 CHUCKING REAMER 22700.2210 (3) 21CM 20087 CHUCKING REAMER 22700.1910 SPECIFICATIONS: MANUFACTURER: 21CM DESCRIPTION: STRAIGHT FLUTE STRAIGHT SHANK HI-SPEED STEEL RIGHT-HAND CHUCKING REAMER MODEL: 40257 DESCRIPTION: 22700.1550 REAMER REAMER DIAMETER: 0.1550" OVERALL LENGTH: 4.000" FLUTE LENGTH: 1.00" FLUTES: 4 MODEL: 40198 DESCRIPTION: 22700.1255 REAMER REAMER DIAMETER: 0.1255" OVERALL LENGTH: 3-1/2" FLUTE LENGTH: 7/8" FLUTES: 4 MODEL: 20100 DESCRIPTION: 22700.2210 REAMER REAMER DIAMETER (WIRE): #2 REAMER DIAMETER: 0.2210" OVERALL LENGTH: 6.00" FLUTE LENGTH: 1-1/2" FLUTES: 6 MODEL: 20087 DESCRIPTION: 22700.1910 REAMER REAMER DIAMETER (WIRE): #11 REAMER DIAMETER: 0.1910" OVERALL LENGTH: 5.00" FLUTE LENGTH: 1-1/4" FLUTES: 6 SKU: U04U013 1A-02-01-04(1) 0LBS - 8IN X 8IN X 4IN

UNIVERSAL INSTRUMENTS CT-0892 8MM FEEDERS (64) WITH ROLL-AROUND STORAGE CART. MANUFACTURER: UNIVERSAL INSTRUMENTS. MODEL: CT-0892. SURFACE MOUNT COMPONENT FEEDERS 8MM SIZE. USED WITH 4796 SERIES HIGH SPEED PLACEMENT MACHINE. LARGE TYPE. CART HAS 79 FEEDER POSITIONS. CONDITION: USED. THE CART HAS SCRATCHED PAINT AND SOME DENTS. SEVEN FEEDERS ARE MISSING THE SPRING-LOADED ARM ON THE INPUT REEL HOLDER. THE FEEDERS HAVE TYPICAL SCUFFS/SCRATCHES FROM PRIOR USE. S/N: V07D004

[NEW] FESTO EAMM-U-60-D32-67A-91 PARALLEL KIT FOR MOTOR MOUNT SIZE 60 IP40. MANUFACTURER: FESTO MODEL: EAMM-U-60-D32-67A-91 PARALLEL KIT FOR MOTOR MOUNT SIZE: 60 ASSEMBLY POSITION: ANY GEAR UNIT RATIO: 1:1 MAX SPEED: 6,000 1/MIN DEGREE OF PROTECTION: IP40 MASS MOMENT OF INERTIA: 26.7 KGMM2 NO-LOAD DRIVING TORQUE: 0.07 NM TRANSFERABLE TORQUE: 3 NM

[CONVEYOR TECHNOLOGIES CTI] DUAL-LEVEL 30"/2X15" INSPECTION WORKSTATION - PARTS - MANUFACTURER: CONVEYOR TECHNOLOGIES CTI MODEL: DOES NOT APPLY CONDITION: FOR PARTS OR NOT WORKING. COMES IN NON-ORIGINAL PACKAGING. THIS STATION IS IN FAIR COSMETIC CONDITION WITH LOTS OF SCUFFS/SCRATCHES TO THE BARE METAL, AS WELL AS RESIDUES FROM OLD ADHESIVE LABELS. THERE ARE NO FEET, ONLY ADJUSTABLE LEGS. PLEASE NOTE: THE CONTROL CABINET HAS BEEN REMOVED AND THE CABLES CUT. THIS IS ONLY THE CONVEYOR WITH NO CONTROLLER OR MOTOR DRIVES! THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THE WIDTH ADJUSTMENT IS IN GOOD WORKING CONDITION. WITHOUT A CONTROLLER WE WERE NOT ABLE TO DO ANY OTHER TESTING. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) CTI INSPECTION CONVEYOR WORKSTATION SPECIFICATIONS: MANUFACTURER: CONVEYOR TECHNOLOGIES DUAL-LEVEL CONVEYOR OPEN-CENTER EDGE-SUPPORTED BELT CONVEYORS TOP LEVEL IS (2) 15" SECTIONS BOTTOM LEVEL IS (1) 30.5" SECTION ADJUSTABLE WIDTH: 3" TO 17.5" DUAL LINEAR GUIDE RAILS FOR PRECISE WIDTH ADJUSTMENT PNEUMATIC PINS RISE INTO CONVEYOR AREA TO STOP PRODUCT OPTICAL SENSORS FOR PRODUCT DETECTION ON EACH CONVEYOR SECTION CLEAR, RETRACTABLE TOP COVER PANEL GOOD/BAD BUTTONS SELECTABLE PASS-THRU MODE AUTO OR MANUAL OPERATION E-STOP ON OPERATOR PANEL SKU: X11D013 6-BILR2(1) 460LBS - 48IN X 40IN X 48IN

[BEST WELDS] [BEST WELDS] 2" X 4.25" HARDENED GLASS FILTER PLATE (40) - MODEL: 932-105-8 - DESCRIPTION: HARDENED GLASS LENS WELDING FILTER PLATE 2" X 4.25" (50.8MM X 108MM) SHADE 8

[NEW] HILTI 3582034 1.0-IN SMOOTH SHANK CARBIDE REBAR CUTTER 1/2-IN SHANK 12-IN L. MANUFACTURER: HILTI MODEL: 3582034 ALTERNATE NUMBER: 3008915 DESCRIPTION: SMOOTH SHANK CARBIDE REBAR CUTTER SIZE: 1.0" LENGTH: 12" SHANK: 1/2" STRAIGHT RELIEF HOLE: YES

1964 WRIGHT TOOL 1964 2.0" 12-POINT OFFSET HANDLE STRIKING FACE BOX WRENCH 6.50LBS. MANUFACTURER: WRIGHT TOOL MODEL: 1964 DESCRIPTION: 12-POINT OFFSET HANDLE STRIKING FACE BOX WRENCH SIZE: 2.0" HEAD DIAMETER: 3.0" HEAD THICKNESS: 1-1/4" OAL: 13" OFFSET: 45-DEGREES WEIGHT: 6.50LBS SKU: U52U015 5A-08-02(1) 9LBS - 16IN X 8IN X 7IN. THIS WRENCH HAS SCUFFS, SCRAPES, AND DINGS, ALONG WITH SOME SPOTS OF RUST AND SIGNIFICANT AND OBVIOUS WEAR ON THE STRIKING HANDLE. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). THIS WRENCH WAS REMOVED FROM AN ACTIVE WORKING ENVIRONMENT AND WAS TESTED SUBSEQUENT TO ITS REMOVAL. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) WRIGHT TOOL 1964 2.0" 12-POINT OFFSET HANDLE STRIKING FACE BOX WRENCH 6.50LBS

(1) 70" GROUND BALL SCREW SHAFT ASSEMBLY SINGLE START TYPE 44" BALL SCREW SHAFT MANUFACTURER: UNBRANDED MODEL: DOES NOT APPLY BALL SCREW SHAFT ASSEMBLY TYPE: GROUND CONFIGURATION: SINGLE START TOTAL LENGTH: 70" END TO END BALL SCREW SHAFT SECTION LENGTH: 44" SHAFT DIAMETER: 1.0135" PITCH: .14" LEAD: .14" MATERIAL: STAINLESS STEEL

[USED] SGS 30131 4-FLUTE SQUARE END STANDARD LENGTH FRACTIONAL BIT (8) - THESE CARBIDE BITS WERE VERY SLIGHTLY USED AND CAREFULLY INSPECTED FOR FLAWS. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (8) SGS 30131 SOLID CARBIDE 4-FLUTE SQUARE END STANDARD LENGTH FRACTIONAL BIT 1/4" CD SPECIFICATIONS: MANUFACTURER: SGS MODEL: 30131 DESCRIPTION: SOLID CARBIDE 4-FLUTE SQUARE END STANDARD LENGTH BIT FLUTES: 4 CUTTING DIAMETER: 1/4 LENGTH OF CUT: 3/4 OVERALL LENGTH: 2-1/2 SHANK DIAMETER: 1/4 RAKE ANGLE: POSITIVE COATING: UNCOATED

[USED] CLECO 5RNAL-254BH-3 PNEUMATIC 90 RIGHT ANGLE 3/8" AIR SCREWDRIVER/NUTRUNNER - MANUFACTURER: CLECO MODEL: 5RNAL-254BH-3 90 RIGHT ANGLE 3/8" HEX LEVER PUSH TO START REVERSE TWIST KNOB REVERSIBLE. COMES IN NON ORIGINAL PACKAGING. THE SCREWDRIVER IS IN GOOD CONDITION WITH SOME LIGHT SCRATCHES FROM PREVIOUS USE. OUR TESTS INCLUDED PLUGGING IN THE SCREWDRIVER TO AN AIR LINE HOSE. FORWARD AND REVERSE OPTIONS WORKED GREAT WITH NO ISSUES. NO FURTHER TESTING WAS PERFORMED. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. SKU: Q13U015 1D-20-02(1) 4LBS - 19IN X 8IN X 4IN

GRACO MASTIC FLUID REGULATOR #246687 W/ 238620 FILTER - PARTS. MANUFACTURER: GRACO MODEL: 246687. COMES IN NON-ORIGINAL PACKAGING. THE FLUID REGULATOR HAS MASTIC FLUID ALL THROUGH THE SYSTEMS AND IN THE VALVES. THIS PRODUCT IS BEING SOLD AS/IS. INCLUDED: (1) GRACO MASTIC FLUID REGULATOR #246687 W/ 238620 MOUNTING FLUID FILTER W/ GUAGE. MANUFACTURER: GRACO MODEL: 246687 & 238620. DESCRIPTION: MASTIC FLUID REGULATOR. SKU: V25O012 2G-02-02(1) 41LBS - 23IN X 23IN X 12IN

[40] TIG STAR TIGT53N61 #7 ALUMINA TIG GAS CUP LENS - MANUFACTURER: TIG STAR MODEL: TIGT53N61 DESCRIPTION: ALUMINA TIG TORCH CUP NOZZLE 7/16", 11MM #7 (9,20) SPECIFICATIONS: MANUFACTURER: TIG STAR MODEL: TIGT53N61 DESCRIPTION: ALUMINA TIG TORCH CUP NOZZLE 7/16", 11MM #7 (9,20) SKU: U51H010 1B-08-02(1) 2LBS - 8IN X 8IN X 4IN

TOKYO KEISO KSP1-047347 FLOWMETER MEASURING MEDIUM: LIQUID RANGE ABILITY: 10:1 ACCURACY: +/- 5% MAX OPERATING PRESSURE: 0.8 MPA MAX OPERATING TEMP: 120 C

[4] SC HEAVY-DUTY SWIVEL TYPE INDUSTRIAL BLUE ROLLING CASTER WHEELS WHEEL DIAMETER: 3.75" WHEEL WIDTH: 1.50" TOTAL HEIGHT: 5.50" BASE DIMENSIONS: 4.50" X 3.75" BOLT HOLE WIDTH: 2.75" X 3.50"

[TSUBAKI RS40 RP ROLLER CHAIN 10 FEET] MANUFACTURER: TSUBAKI MODEL: RS40 RP ROLLER CHAIN MATERIAL: STEEL ROLLER TYPE OF BASE CHAIN: "S" ROLLER PITCH: .500" ROLLER DIAMETER: .312" WIDTH BETWEEN ROLLER LINK PLATES: .312" LENGTH: 10 FEET 240 LINKS TOTAL. CONDITION: NEW OTHER. COMES IN ORIGINAL PACKAGING. THE ITEM IS IN NEW OLD STOCK CONDITION. THE ITEM IS UNUSED BUT THE BOX IS IN ROUGH SHAPE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN.

[INBUYING PC180 PLASTIC SHREDDER GRANULATOR PLASTICMILL 220V] MANUFACTURER: INBUYING MODEL: PC180 BLUE / 180 TYPE DESCRIPTION: PLASTIC SHREDDER GRANULATOR PLASTICMILL VOLTAGE: 220V POWER: 2.2KW RATED CURRENT: 13.85A TRANSMISSION MODE: BELT NUMBER OF BELTS: 2 NUMBER OF MOVABLE BLADES: 9 BLADE MATERIAL: ALLOY STEEL SPINDLE SPEEDS: 520R/MIN FEED PORT DIMENSIONS: 4" X 8" SCREEN APERTURE: 3MM DIAMETER OF CRUSHING CHAMBER: 150MM X 200MM

[CLECO 8RSCO-20BQ] PNEUMATIC PISTOL GRIP 1/4" AIR SCREWDRIVER/NUTRUNNER DRIVER. MANUFACTURER: CLECO MODEL: 8RSCO-20BQ. THE SCREWDRIVER IS IN GOOD CONDITION WITH SOME SCRATCHES AND BLEMISHES FROM PREVIOUS USE. FORWARD AND REVERSE WORKED GREAT WITH NO ISSUES. NO FURTHER TESTING WAS PERFORMED. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) CLECO 8RSCO-20BQ PISTOL GRIP AIR PNEUMATIC SCREWDRIVER/NUTRUNNER. SPECIFICATIONS: MANUFACTURER: CLECO MODEL: 8RSCO-20BQ 1/4" HEX PISTOL GRIP STYLE TRIGGER PUSH TO START REVERSE PUSH BUTTON QUICK CHANGE CHUCK. 6LBS - 10IN X 10IN X 6IN

[UNBRANDED A796F76] #5 EXTRA-LONG CERAMIC NOZZLE 5/16" (20) - MANUFACTURER: UNBRANDED MODEL: A796F76 CONDITION: NEW OTHER. THESE NOZZLES ARE IN A NEW AND UNUSED COSMETIC CONDITION AND COME INDIVIDUALLY PACKAGED IN THE ORIGINAL BOXES OF 10 THAT DO SHOW SOME SIGNS OF SHELF WEAR AND OCCASIONALLY WRITING ON THE OUTSIDE OF THE BOX. THERE IS NO BRAND OR MAKER MARK ON THESE BOXES. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (20) UNBRANDED A796F76 #5 EXTRA-LONG CERAMIC NOZZLE 5/16" SPECIFICATIONS: MANUFACTURER: UNBRANDED MODEL: A796F76 DESCRIPTION: EXTRA-LONG CERAMIC GAS CUP NOZZLE #5 5/16" SKU: V02H037 4B-03-02(1) 2LBS - 6IN X 6IN X 4IN

MARKAL 86463 THERMOMELT HEAT STICK TEMP 150-F 66-C (12) - MANUFACTURER: MARKAL MODEL: 86463 CONDITION: NEW OTHER. THESE HEAT STICKS ARE IN A NEW AND UNUSED COSMETIC CONDITION AND COME IN THE ORIGINAL MARKAL BOX THAT CONTAINS 12 STICKS. THE BOX SHOWS SOME SIGNIFICANT WEAR FROM STORAGE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (12) MARKAL 86463 THERMOMELT HEAT STICK TEMP 150-F 66-C SPECIFICATIONS: MANUFACTURER: MARKAL MODEL: 86463 DESCRIPTION: THERMOMELT HEAT STICK TEMP 150-F 66-C THE BIG STICK! SKU: V03H032 2F-03-02(1) 2LBS - 8IN X 8IN X 4IN

TERMOTEK P10035-23886-A MIKO MINIATURE AIR COOLED WATER CHILLER R134A 370W REFRIGERATION. MANUFACTURER: TERMOTEK GMBH TYPE: P10035-23886-A MIKO SERIES MINIATURE COOLING SYSTEM AIR-COOLED LIQUID CHILLER DESIGNED FOR ANALYTICAL APPLICATIONS LOW NOISE, MINIMAL VIBRATIONS COOLING CAPACITY RATING: 370 WATTS PUMP PERFORMANCE: 3.5 LITERS/MINUTE POWER REQUIREMENT: 24V DC <16A REFRIGERANT: R134A COMPRESSOR: SAMSUNG UX0T011ZNAE5 MINIATURE ROTARY COMPRESSOR (ROLLING 2-PISTON TYPE) NOMINAL CAPACITY: 1,100 BTU/H (SPECIFIED UP TO NEARLY 1,400) INPUT POWER: 113 WATTS NOISE RATING: <42 DB(A) MAX. TANGENTIAL VIBRATION RATING: <20 MICROMETERS 6-POLE 3 PHASE DC BRUSHLESS MOTOR CONTROLLER: FUJI ELECTRIC PXF4ACP2-JBM00 DUAL 4-DIGIT DISPLAYS (PROCESS AND SET VALUES) MOUNTING: 48MM SQUARE PANEL CUTOUT SSR DRIVE AND VOLTAGE OUTPUTS 2 POINTS ALARM OUTPUT RS-485 OUTPUT (USB CONVERTER IS INCLUDED) PUMP: SANSO PDH-E054IT9-CE MAX. HEAD: 19 METERS POWER: 55 WATTS (24 VDC 2.3A) RESERVOIR: TERMOTEK SWITCH: WILSPEC HR200-555-0006 QUICK-RELEASE INLET/OUTLET/DRAIN FITTINGS. THIS CHILLER HAS BEEN MODIFIED TO FIT IN THE PROTOTYPE MICROSCOPE FROM WHICH IT WAS REMOVED. THERE ARE CABLES FOR POWER INPUT AND CABLES TO ATTACH THE CONTROLLER. THERE ARE NO SIDE OR TOP PANELS, AND NO POWER SUPPLY IS INCLUDED. THE COOLANT WAS CLEAN AND INSIDE THE RESERVOIR LOOKS CLEAN ALSO. THIS WAS REMOVED FROM A DECOMMISSIONED SYSTEM AND NOT TESTED SEPARATELY. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) TERMOTEK P10035-23886-A CHILLER.

[HILTI X-FCM-R THREADED GRATING FASTENER DISCS 1 1/4"] MANUFACTURER: HILTI MODEL: X-FCM-R CONDITION: NEW OTHER. COMES IN ORIGINAL PACKAGING. THE FASTENERS HAVE BEEN REMOVED FROM THE BOX FOR COUNTING AND PHOTO PURPOSES. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (100) NEW HILTI 247184 X-FCM-R THREADED GRATING FASTENER DISCS 1 1/4" SPECIFICATIONS: MANUFACTURER: HILTI MODEL: X-FCM-R THREADED STUD GRATING FASTENER DISC GRATING HEIGHT: 1 1/8"-1 5/16" MATERIAL: EQUIVALENT TO A4(316)STAINLESS STEEL, STEEL BASE MATERIAL FOR USE WITH (TOOLS): DX 351 BTG APPLICATION: GRATING APPROVALS: ABS, BV, DNV GL, LR MINIMUM THICKNESS OF BASE MATERIAL: 1/4" ENVIRONMENTAL CONDITIONS: DRY INDOOR, INDOOR WITH TEMPRARY CONDENSATION, OUTDOOR TEMPORARY APPLICATIONS, OUTDOOR WITH LOW POLLUTION, OUTDOOR WITH MODERATE CONCENTRATION OF POLLUTION, COASTAL AREAS, OUTDOOR, AREAS WITH HEAVY INDUSTRIAL POLLUTION SKU: U46B002 4B-01-01(4) 10LBS - 16IN X 12IN X 8IN

[USED] YUSHIN NGDB-10 DISC BRAKE ASSEMBLY W/8" DIAMETER DISC ATTACHMENT. MANUFACTURER: YUSHIN, MODEL: NGDB-10, DISC BRAKE ASSEMBLY, VOLTAGE RATING: 24 VDC, DISC DIAMETER: 8", BRACKET MOUNTING FORCE: 100 N. MADE IN JAPAN.

FAULTLESS 400-3 STEEL SWIVEL 3" INDUSTRIAL ROLLING CASTER WHEELS (4) WHEEL DIAMETER: 3" WHEEL WIDTH: 1.25" TOTAL HEIGHT: 3.75" BASE DIMENSIONS: 2.50" X 3.50" BOLT HOLE WIDTH: 3" X 1.75"

UNKNOWN UNKNOWN SMALL SWIVEL ROLLING CASTER CART (4) - SPRING SHAFT SWIVEL TYPE INDUSTRIAL SMALL ROLLING CASTER WHEELS SWIVEL TYPE WHEEL DIAMETER: 1.75" WHEEL WIDTH: 0.75" TOTAL HEIGHT: 7.25" SHAFT WIDTH: 0.50" SHAFT LENGTH: 3.50" SPRING LENGTH: 3". THE CASTERS ARE IN USED CONDITION WITH SCUFFS, SCRATCHES, AND SOME RESIDUE FROM PREVIOUS USE. THE WHEELS ROLL AND THE SWIVEL BASE WORKS AS INTENDED.

[KANEFUSA] SUPER HI-MAX 350MM 30MM 100T MITER SAW CARBIDE BLADE 14" - MANUFACTURER: KANEFUSA MODEL: 7L91695700144 CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THE BLADE IS IN GOOD, USED CONDITION WITH SOME SCUFFS AND SCRATCHES FROM PREVIOUS REGULAR USE. THERE ARE SOME MARKINGS ON THE BLADE, AS SHOWN IN THE PHOTOS. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THE BLADE WAS REMOVED FROM A DECOMMISSIONED MACHINE. NO FURTHER TESTING WAS PERFORMED AFTER REMOVAL. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) KANEFUSA 7L91695700144 350MM CARBIDE STEEL MITRE SAW BLADE 7300RPM MAX SPECIFICATIONS: MANUFACTURER: KANEFUSA MODEL: 7L91695700144 PART #: 350X3.8X3.0X30X100XA-B3 HI-MAX REPLACEMENT MITRE SAW BLADE 10-5-15-10 DIAMETER: 350MM (13.77') TEETH: 100T ARBOR: 30MM BORE MAX SPEED: 7300 RPM CONSTRUCTION MATERIAL: CARBIDE STEEL MADE IN JAPAN SKU: Y20B003 1D-02-03(1) 9LBS - 18IN X 18IN X 5IN

SANDVIK COROMANT 5736003 COROCUT N123X2G CM1125 CARBIDE CUTOFF INSERT (20) - MANUFACTURER: SANDVIK COROMANT MODEL: 5736003 THESE CARBIDE INSERTS WERE VERY SLIGHTLY USED AND CAREFULLY INSPECTED FOR FLAWS. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). THESE CARBIDE INSERTS WERE VERY SLIGHTLY USED AND CAREFULLY INSPECTED FOR FLAWS. INCLUDED: (20) SANDVIK COROMANT 5736003 COROCUT N123X2G CM1125 CARBIDE CUTOFF INSERT 0.1181" CUTTING WIDTH SPECIFICATIONS: MANUFACTURER: SANDVIK COROMANT MODEL: 5736003 ANSI / ISO NO: N123G2-0300-0002-CM1125 DESCRIPTION: COROCUT N123X2G CM1125 CARBIDE CUTOFF INSERT CUTTING WIDTH: 3.00MM (0.1181") GRADE: 1125 CHIP BREAKER: CM COATING: TIAIN MAX DEPTH OF CUT: 18.90MM (0.7441") OVERALL LENGTH: 19.61MM (0.7720") CORNER RADIUS: 0.2MM (0.0079")

RUBBERMAID TILT TRUCK 1314 / 1 CU. YD

1958 WRIGHT TOOL 1958 1-13/16" 12-POINT OFFSET HANDLE STRIKING FACE BOX WRENCH. MANUFACTURER: WRIGHT TOOL, MODEL: 1958, DESCRIPTION: 12-POINT OFFSET HANDLE STRIKING FACE BOX WRENCH, SIZE: 1-13/16", HEAD DIAMETER: 2-7/8", HEAD THICKNESS: 1-1/8", OAL: 12-1/2", OFFSET: 45-DEGREES, SKU: U52U010 5A-08-02(1). CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THIS WRENCH HAS SCUFFS, SCRAPES, AND DINGS, ALONG WITH SOME SPOTS OF RUST AND WEAR ON THE STRIKING HANDLE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS WRENCH WAS REMOVED FROM AN ACTIVE WORKING ENVIRONMENT AND WAS TESTED SUBSEQUENT TO ITS REMOVAL. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) WRIGHT TOOL 1958 1-13/16" 12-POINT OFFSET HANDLE STRIKING FACE BOX WRENCH. 8LBS - 16IN X 8IN X 7IN

[NEW OTHER] UNITED ABRASIVES 25102 TYPE 17 CONE (10) - THESE ABRASIVE CONES ARE IN NEW AND UNUSED COSMETIC CONDITION AND COME IN THE ORIGINAL UNITED ABRASIVES BOX THAT SHOWS SOME MINOR WEAR FROM STORAGE. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (10) UNITED ABRASIVES 25102 TYPE 17 CONE 1-1/2 X 2 - 1/2 X 5/8-11 A20 SPECIFICATIONS: MANUFACTURER: UNITED ABRASIVES MODEL: 25102 DESCRIPTION: TYPE 17 CONE SAIT 1-1/2 X 2 1/2 X 5/8-11 A20 SKU: U50H005 1B-19-01(19) 4LBS - 8IN X 8IN X 7IN

[LASERMAX ROLL SYSTEMS INC./TECNAU] 50488202 BLOW-DOWN FAN UNIT 100-120 VOLTS 1A 50/60HZ. MANUFACTURER: LASERMAX ROLL SYSTEMS INC./TECNAU GROUP. MODEL: 50488202 BLOW DOWN FAN UNIT FOR ROLL SYSTEMS DESIGN: DOWNWARD SUCTION. VOLTAGE: 100-120 VOLTS. FREQUENCY RATING: 50/60 HZ. CURRENT RATING: 1 AMP. UL LISTED COMPONENT.

YAMAHA MOTOR CO. KGS-M4570-015 PANEL I/O HEAD BOARD ASSEMBLY PCB BOARD - MANUFACTURER: YAMAHA MODEL: KGS-M4570-015 CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS BOARD WAS PULLED FROM A WORKING SETUP THAT WAS BEING DECOMMISSIONED, BUT WAS NOT TESTED SEPARATELY AFTER REMOVAL. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) YAMAHA MOTOR CO. KGS-M4570-015 PANEL I/O HEAD BOARD ASSEMBLY SPECIFICATIONS: MANUFACTURER: YAMAHA MOTOR CO. MODEL: KGS-M4570-015 DESCRIPTION: I/O HEAD BOARD ASSEMBLY WEIGHT: 0.55 LBS. CONDITION: USED QUANTITY: 1 SKU: P23P024 1E-02-02(1) 3LBS - 12IN X 12IN X 6IN

CONVEYOR TECHNOLOGIES FMU-SERIES MAGAZINE UNLOADER -PARTS. MANUFACTURER: CONVEYOR TECHNOLOGIES CTI MODEL: FMU. THIS UNLOADER IS IN FAIR COSMETIC CONDITION. THE ENTIRE ELECTRONICS CONTROL ENCLOSURE HAS BEEN REMOVED AND THE WIRES TO IT WERE CUT. THERE IS A MAGAZINE STUCK, CROOKED, INSIDE. SPECIFICATIONS: MANUFACTURER: CONVEYOR TECHNOLOGIES FMU-SERIES MAGAZINE UNLOADER ADJUSTABLE WIDTH, FOR BOARDS UP TO 15" WIDE MAX. BOARD LENGTH 18" HOLD UP TO 2 MAGAZINES EACH ON INLET AND OUTLET CONVEYORS MISSING THE CONTROL ENCLOSURE. NO CONTROLLER OR OTHER ELECTRONICS. 900LBS - 103IN X 50IN X 83IN

2004 PARKSON PTT-400 CNC ROTARY TABLE 4TH AXIS 44CM DIAMETER MITSUBISHI 7KW HC-SFS702 MOTOR. MANUFACTURER: PARKSON MODEL: PTT-400 CONDITION: USED. THIS TABLE IS IN FAIR OVERALL COSMETIC CONDITION. THERE ARE LOTS OF SCUFFS/SCRATCHES STAINS AND RESIDUES FROM PRIOR USE. THE PLATFORM ITSELF HAS SOME SPOTS OF LIGHT CORROSION. THERE IS A BROKEN HOSE ON THE PNEUMATIC BOOSTER THAT IS OLD AND DEGRADED/BROKEN. THERE IS A BIT OF RUST VISIBLE INSIDE THE REMOVABLE COVERS. ONE OF THE REMOVABLE COVERS (ON THE MOTOR HOUSING) IS MISSING. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS TABLE WAS PULLED FROM LONG-TERM STORAGE IN UNKNOWN WORKING CONDITION. THE PLATFORM SPINS VERY SMOOTHLY WITH LIGHT HAND PRESSURE, WITHOUT ANY UNUSUAL NOISES. WE ARE NOT ABLE TO POWER THE MOTOR AND DON'T KNOW WHAT THE BOOSTING CYLINDER IS SUPPOSED TO BE DOING. WHEN AIR WAS PUT TO THE HOSE COMING FROM THE BOTTOM OF THE TABLE, AIR CAME FROM THE HOSE PROTRUDING UP THROUGH THE MIDDLE OF THE PLATFORM. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) PARKSON PTT-400 CNC ROTARY TABLE SPECIFICATIONS: MANUFACTURER: PARKSON MODEL: PTT-400 CNC ROTARY TABLE PLATFORM DIAMETER: APPROXIMATELY 44CM (17") MOTORIZED WITH MITSUBISHI HC-SFS702 AC SERVO MOTOR INPUT: 3PHASE AC 144V 35A OUTPUT: 7KW RATED SPEED: 2000RPM PROTECTION: IP65 INCLUDES CHEN SOUND 050 PNEUMATIC BOOSTING CYLINDER MANUFACTURED: 2004 SKU: T28D006 5A-25-01(1) 840LBS - 48IN X 40IN X 46IN

SIERRA RESEARCH AND TECH SRT SIERRA SUMMIT 1000 REWORK STATION AND LEICA MS5