JAMI Enterprise Inc and MORE 30 HIGH END CNC MACHINES HWACHEON FADAL TORNOSDAEWOO STAR CITIZEN NOMURADOOSAN SUMMIT OKUMA HAAS

2014 ELUMATEC SBZ 151 5-AXIS CNC PROFILE VERTICAL MACHINING CENTER. THIS MACHINE IS USED FOR FLEXIBLE AND EFFICIENT PROCESSING OF ALUMINUM AND THIN STEEL PROFILES. IT CAN PERFORM VARIOUS OPERATIONS LIKE DRILLING, TAPPING, SAWING, ROUTING AND NOTCHING OVER THE SECURE POSITIONED MATERIALS. MATERIAL PROCESSING IS POSSIBLE ALONG SIX SIDES WITH FAST POSITIONING. SIDED IS AN INDEPENDENT CNC THAT SERVES FOR CONTROLLING THE 3D MACHINING, NOTCHING AND CUTTING. ALL PERFORMING ACTIONS ARE CONTROLLED WITH CPU UNIT WITH THE OPERATING SYSTEM, THAT IS AVAILABLE ON THE FRONT. ENTIRE MACHINE PROVIDES SECURE ACCESS WITH THE SAFE FENCES AND LIGHT BARRIERS, WHERE MAIN PROCESSING AREA HAS SAFETY HOOD WHICH PREVENTS OUTBREAK OF CUTTED MATERIAL. TRAVERSE PATH X-AXIS 10,300 MM, Y-AXIS TRAVERSE PATH 1,150 MM, VMAX. 40 M/MIN. Z-AXIS TRAVERSE PATH 715 MM, VMAX. 40 M/MIN. PIVOTING ANGLE A-AXIS (FOR SAW BLADE WITH DIAMETER OF 500 MM) +/- 100 (FOR SAW BLADE WITH DIAMETER OF 400 MM +/- 110) C-AXIS PIVOTING ANGLE +/- 182 POSITIONING ACCURACY X-/Y-/Z-AXIS +/- 0.1 MM/M A-/C-AXIS +/- 0.1 MAX. SPINDLE SPEED 24,000 RPM SPINDLE POWER OUTPUT 20 KW S1 RIGHT TOOL CHANGER, 20 TOOL POSITIONS LEFT TOOL CHANGER, ONE SAW BLADE WITH A DIAMETER OF 500 MM (400 MM OPTIONAL) POSSIBLE ON SPECIAL TOOL POSITIONS 13X MAX. 50 MM 1X MAX. 180 MM (SAW BLADE) 1X MAX. 100 MM 5X MAX. 63 MM (OPTIONALLY 2X WFK) TOOL HOLDER HSK-63F COMPRESSED AIR SUPPLY 7 BAR POWER SUPPLY 400 V, 3~, 50 HZ, 50 A AIR CONSUMPTION PER MINUTE APPROX. 265 L WITH SPRAYING SBZ 151 SBZ 151 EDITION 90 - PROFILE MACHINING CENTRE DESIGNED FOR FLEXIBLE AND EFFICIENT MACHINING OF ALUMINIUM AND THIN-WALLED STEEL PROFILES ALL OPERATIONS, SUCH AS ROUTING, DRILLING, TAPPING, THREAD MILLING, NOTCHING AND SAWING, ARE PERFORMED WHILE THE PROFILE BAR IS STATIONARY TO PROTECT THE PROFILE SURFACES FAST POSITIONING OF THE MACHINING UNIT WITH UP TO 66 M/MIN THANKS TO DYNAMIC SERVO DRIVES 6-SIDED MACHINING. FROM BELOW WITH AN ANGLE HEAD (OPTIONAL) THE ON-BOARD TOOL MAGAZINES ENSURE THAT TOOL CHANGING TIMES ARE KEPT SHORT, THEREBY OPTIMIZING MACHINING CYCLES ONE MAGAZINE CAN BE EQUIPPED WITH 13 STANDARD TOOLS AND SEVEN SPECIAL TOOLS (ANGLE ROUTING HEAD AND SPECIAL CUTTERS). AN ADDITIONAL MAGAZINE FOR THE SAW BLADE, DIAMETER 400 MM OR 500 MM AUTONOMOUS CLAMP POSITIONING WITH ABSOLUTE MEASUREMENT SYSTEM TWO SEPARATE WORKING ZONES ENABLE MACHINING IN SHUTTLE OPERATION. SECURE ACCESS WITH SAFETY FENCES AND LIGHT BARRIERS 5-AXIS CNC CONTROL WITH INDEPENDENT CNC FOR 3D MACHINING, NOTCHING AND CUTTING THE ABSOLUTE ROTARY ENCODER SYSTEM MEANS NO AXIS HOMING IS REQUIRED NETWORK CONNECTION AND USB PORT OPERATING TERMINAL WITH WINDOWS OPERATING SYSTEM AND 15" FLAT SCREEN REMOTE ONLINE MAINTENANCE SBZ 151 - 10.3 M MAX. MACHINING LENGTH WITH PROFILE END MACHINING, 9,980 MM MAX. MACHINING LENGTH WITHOUT PROFILE END MACHINING, 10,300 MM OPTIONS AVAILABLE IN CATALOG AUTOMATIC LENGTH MEASUREMENT ON BOTH SIDES AUTOMATIC LENGTH MEASUREMENT ON BOTH SIDES WITH Z TRAVEL TOOL LENGTH MEASUREMENT AND FRACTURE DETECTION TAPPING WITHOUT COMPENSATION CHUCK CLOCK SYSTEM 3D WIRELESS MEASUREMENT SENSOR TOOLS TOOL HOLDERS COLLET CHUCKS COLLETS ANGLE ROUTING HEADS FOR MACHINING FROM BELOW SAW BLADES CHIPS CONVEYOR BELT VAPER EXTRACTOR LABEL PRINTER BARCODE SCANNER CURRENTLY IN OPERATION ***NEW SPINDLE INSTALLED 3 MONTHS AGO, COST $33,000***

PNEUMO PRECISION INC DIAMOND TOOL LATHE TURNING MACHINE MODEL 41-0-150-306-Z-D5 - PNEUMO PRECISION INC DIAMOND TURNING MACHINE MODEL 41-0-150-306-Z-D5 GRANITE BASE FLOATING ON AIR CUSHION, MS-300 SPINDLE, VACUUM CHUCK, SUPER HIGH PRECISION, AIR COMPRESSOR, AIR ACCUMULATOR TANK GRANITE BASE WITH AIR CUSHIONS, VACUUM CHUCK RADIAL RUNOUT @ 1000 RPM 1.4U AXIAL RUNOUT @ 1000 RPM 1.2U

KUGLER F1000CNC FLY-CUTTER , SINGLE POINT DIAMOND MACHINING , FOR OPTICAL SURFACE MANUFACTURING ON NONE-FERROUS MATERIALS FLY-CUTTER F 1000 CNC, SINGLE POINT DIAMOND MACHINING , FOR OPTICAL SURFACE MANUFACTURING ON NONE-FERROUS MATERIALS, SUCH AS COPPER ALUMINUM , E-NICKEL , PLASTICS .... ACHIEVABLE SURFACE QUALITIES: SURFACE FLATNESS < 100 NM OVER 4" DIAM SURFACE ROUGHNESS < 1 NM RA ( < 10 A) RITTAL CONTROLLER VACUUM CHUCK VACUUM PUMP

2013 HAAS VF10/40 CNC VERTICAL MACHINING CENTER, 8100 RPM, 4TH AXIS READY, COOLANT THRU SPINDLE, EARLY POWER FAILURE DETECTION, PROGRAMMABLE COOLANT NOZZLE STRICT REMOVAL SCHEDULE. TRAVELS: X AXIS..............................: 120" Y AXIS..............................: 32" Z AXIS..............................: 30" SPINDLE: SPINLE HP...........................: 30 SPINDLE NOSE TO TABLE MAX...........: 34" SPINDLE NOSE TO TABLE MIN...........: 4" SPINDLE RPM.........................: 8100 MAX TORQUE..........................: 90 FT LB @ 2000 RPM TAPER...............................: 40 TABLE: LENGTH..............................: 120" WIDTH...............................: 28" MAX WEIGHT ON TABLE.................: 4,000 LBS TOOL CHANGER........................: 24+1 FEEDRATES: MAX CUTTING.........................: 360 IPM RAPIDS ON X.........................: 360 IPM RAPIDS ON Y.........................: 600 IPM RAPIDS ON Z.........................: 600 IPM RIDGID TAPPING...................... 4TH AXIS DRIVE & WIRING............. THROUGH SPINDLE COOLANT............. PROGRAMMABLE COOLANT............... EARLY POWER FAILURE MODULE....... REMOTE JOG HANDLE................. ONLY CUT ALUMINUM VISES INCLUDED TOOL HOLDERS NOT INCLUDED

2021 KEYENCE LM-1100 HIGH PRECISION IMAGE DIMENSION MEASUREMENT SYSTEM S/N: 3C123184 - THE LM SERIES HIGH-ACCURACY INSTANT MEASUREMENT SYSTEM IS AN AUTOMATED INSPECTION SYSTEM THAT CAN PERFORM MEASUREMENTS TO +/- 0.7 ?M ACCURACY AND +/- 0.1 ?M REPEATABILITY AT THE PUSH OF A BUTTON. SIMILAR TO THE IM SERIES, THE UNIT HAS BUILT-IN EDGE DETECTION WITH AUTOMATIC FOCUS AND LIGHTING. THE UNIT ALSO AUTOMATICALLY RECORDS MEASUREMENT DATA AND CREATES DETAILED INSPECTION REPORTS. THE IMAGE SHOWCASES OUR LATEST LM-1100 MODEL WHICH HOUSES HIGH-RESOLUTION DOUBLE TELECENTRIC LENSES FOR PRECISION OPTICAL INSPECTION AND A LARGE 9 X 5 INCH FIELD OF VIEW. 0.1 ?M HIGH ACCURACY SIMPLE OPERATION FOR ANY USER MEASURE INSTANTLY AT THE PRESS OF A BUTTON FEATURES: MEASURE PARTS REGARDLESS OF ORIENTATION. MEASURE UP TO 100 PARTS SIMULTANEOUSLY. QR CODE GENERATION FOR QUICKLY FINDING PROGRAMS. WIDE FIELD OF VIEW FOR EASY OPERATION AND FAST MEASUREMENT. LIGHTING SETTINGS: TELECENTRIC TRANSPARENT ILLUMINATION, COAXIAL ILLUMINATION, FOUR DIVISION MULTI-ANGLE ILLUMINATION, FOUR DIVISION MULTI-ANGLE ILLUMINATION BELOW, SLIT RING ILLUMINATION. INCORPORATED TEMPERATURE SENSOR NON-CONTACT HEIGHT AND DEPTH MEASUREMENT IMAGE SENSOR: 1, 20-MEGA PIXEL MONOCHROME CMOS IMAGE MEASUREMENT: FIELD OF VIEW WIDE-FIELD MEASUREMENT MODE 225MM X 125MM (8.86X4.92). HIGH-PRECISION MEASUREMENT MODE 206MM X 106MM (8.11X4.17). XY STAGE: MOVING RANGE 200MM X 100MM (7.87 X 3.94) (ELECTRIC) Z STAGE: MOVING RANGE 75MM (2.95) (ELECTRIC) POWER SUPPLY: 100 TO 240 V AC +/-10% (50/60 HZ) EQUIPPED WITH: LM-1100 HEAD LM-1001 CONTROLLER PC SOFTWARE ORIGNAL SHIPPING BOX AVAILABLE FOR TRANSPORTATION

ADVANCED ENGINEERING MDX-1K GOLD PLATING EVAPORATOR, ULVAC PUMP, (2) CTI-CRYOGENICS CHILLERS, ZEKS AIR TANK

EVEY ENGINEERING LINDBERG OVEN, OMEGA CN76000 CONTROL, VEECO V-300 VACUUM, EXTRA REBUILT WELCH VACUUM PUMP (GREEN TANK IN BACK NOT INCLUDED)

2008 HAAS VF-7/40 CNC 3-AXIS CNC VERTICAL MACHINING CENTER, 10,000 RPM SPINDLE, REMOTE JOG HANDLE, PCOOL STRICT REMOVAL SCHEDULE. TRAVELS: X AXIS: 84" Y AXIS: 32" Z AXIS: 30" SPINDLE NOSE TO TABLE: 34" MAX SPINDLE NOSE TO TABLE: 4" MIN SPINDLE: HP: 20 MAX SPEED: 10000 RPM MAX TORQUE: 90 FT-LBF @ 2000 RPM 2 SPEED GEAR DRIVE: YES TAPER: 40 TABLE: LENGTH: 84" WIDTH: 28" MAX WEIGHT ON TABLE: 4,000 LBS FEEDRATES: MAX THRUST X: 3400 LBF MAX THRUST Y: 3400 LBF MAX THRUST Z: 5600 LBF TOOL CHANGER: 24 + 1 ATC RIDGID TAPPING: WIPS: PROBING: NO SPINDLE PROBE, NO TOOL SETTER PROBE ONLY CUT ALUMINUM NO TOOLING WIRED FOR 4TH AXIS

1995 PRATT AND WHITNEY 1/2BX X 30 SPINDLE GUN DRILL S/N: 454 .75" X 30" SPECIFICATIONS, #FEEDS, PER REVOLUTION OF SPINDLE, ANY FOUR AT CUSTOMER'S OPTION, .0002", LENGTH 193", WIDTH 33", HEIGHT 84", WEIGHTS:, MACHINE WITH REGULAR EQUIPMENT, NET APPROXIMATE LBS. 6600, CRATING MATERIAL, DOMESTIC, APPROXIMATE LBS. 700, BOX, CUBIC FEET 330, MOTORS:, 2-1 H.P. C.R MACHINE) OR 2 H.P. (1 LB. MACHINE) CONSTANT SPEED SPINDLE DRIVE MOTORS 2-2 H.P., 750-900 R.P.M. CONSTANT SPEED MOTORS FOR PUMPS (1 LB. MACHINE), 2-3 H.P. 1000-1200 R. P. M. CONSTANT SPEED MOTORS FOR PUMPS - 1 LB MACHINE, 1- H.P. MOTOR FOR FILTER, A. C. MOTORS ARE AVAILABLE FOR EITHER TWO OR THREE-PHASE, 50 OR 60 CYCLE, 220, 440, 550 VOLTS. OTHER CURRENT CHARACTERISTICS ARE SPECIAL, TWO-SPEED MOTORS FOR 2-PHASE CURRENT, AND TWO OR FOUR-SPEED MOTORS FOR 3-PHASE CURRENT, GIVING ADDITIONAL SPINDLE SPEEDS, CAN ORDINARILY BE, FURNISHED AT SPECIAL PRICES, REGULAR EQUIPMENT:, THE MACHINE ARRANGED FOR V-BELT MOTOR DRIVE, WITH BUILT-IN AUTOMATIC STARTERS AND PUSH BUTTONS FOR ALL MOTORS, INCLUDING ONE H.P. FILTER MOTOR,, TWO. SPINDLE DRIVE AND TWO PUMP MOTORS; WITH COOLANT PUMPS AND PIPING, TORQUE LIMITING DEVICE, 3-JAW UNIVERSAL CHUCKS AND GUARDS, AND THE FOLLOWING EQUIPMENT FOR ANY ONE JOB: 2 WORK BUSHINGS, 2 DRILL BUSHINGS,, NOTES:, *2-STEP PULLEYS PERMIT TWO-SPINDLE SPEED. EXTRA PULLEYS GIVING ADDITIONAL SPEEDS MAY BE PURCHASED AS ADDITIONAL EQUIPMENT, **THE FOUR FEEDS ARE OBTAINED THROUGH CHANGE GEARS. EXTRA CHANGE GEARS MAY BE PURCHASED AS ADDITIONAL EQUIPMENT, EQUIPPED WITH, UPDATED ELECTRICS,, 2 CHUCKS, 2 CHIP BOXES,

2007 HYUNDAI KIA VX-400 CNC VERTICAL MACHINING CENTER S/N: G3683-0352 AXIS3 TYPE OF CNC CONTROL FANUC 0I-MC TABLE SIZE 39.4" X 18.1" TABLE CAPACITY 1323 POUNDS X-AXIS TRAVEL 31.5 INCHES Y-AXIS TRAVEL 18.1 INCHES Z-AXIS TRAVEL 20.5 INCHES SPINDLE TAPER 40 SPINDLE SPEED 8000 RPM SPINDLE MOTOR 20 HP TOOL CHANGER CAPACITY 24 DIMENSIONS 120" X 83" X 112" WEIGHT 11300 POUNDS EQUIPPED WITH: COOLANT THRU SPINDLE, COOLANT SYSTEM, CHILLER, ROTARY NOT INCLUDED (ROTARY BEING SOLD IN LOT 21)

2007 HYUNDAI KIA VX-400 CNC VERTICAL MACHINING CENTER S/N: G3683-0363 AXIS3 TYPE OF CNC CONTROL FANUC 0I-MT TABLE SIZE 39.4" X 18.1" TABLE CAPACITY 1323 POUNDS X-AXIS TRAVEL 31.5 INCHES Y-AXIS TRAVEL 18.1 INCHES Z-AXIS TRAVEL 20.5 INCHES SPINDLE TAPER 40 SPINDLE SPEED 8000 RPM SPINDLE MOTOR 20 HP TOOL CHANGER CAPACITY 24 DIMENSIONS 120" X 83" X 112" WEIGHT 11300 POUNDS EQUIPPED WITH: COOLANT THRU SPINDLE, MINI ME MIST COLLECTOR, VISES NOT INCLUDED (VISES SOLD IN LOTS 22-34)

1998 OKAMOTO ACC-2440ST CNC PRECISION SURFACE (CREEP FEED) GRINDER WITH DIAMOND FORM CRUSH DRESSER, S/N 10002, SPECIFICATIONS, TABLE WORKING CAPACITY (W X L) IN. 24X41, MAX. DISTANCE UNDER 20" WHEEL TO TABLE SURFACE IN. 27, STANDARD CHUCK SIZE (W X L X H). IN. 24X40, AVERAGE CHUCK WEIGHT LBS. 960 1440, TABLE LOAD CAPACITY (INCLUDING CHUCK WEIGHT) LBS. 3300, T-SLOT (WIDTH X NO.) IN.X N. 0. BX3, LONGITUDINAL FEED MAX. TRAVEL IN. 45, LONGITUDINAL FEED RATE FT/MIN 6. 6-82, CROSS FEED MAX. TRAVEL IN. 25, AUTOMATIC FEED TRAVEL IN. 25, RAPID FEED RATE FT/MIN 16. 5, MANUAL FEED HANDFEED PER REVOLUTION (XL/X5/X20) IN. 0. 01/0. 05/0. 2, GRADUATION OF HANDWHEEL (XL/X5/X20) IN. 0. 0001/0. 0005/0, 002, AUTOMATIC, FEED INTERMITTENT FEED IN. 0. 004-1. 57, CONTINUOUS FEED RATE IN/MIN 0-39. 4, VERTICAL FEED RAPID FEED RATE IN/MIN 47, MANUAL FEED HANDFEED PER REVOLUTION (X0.1/XL/XLO) .IN. 0. 001/0. 01/0. 1, GRADUATION OF HANDWHEEL (X0.1/XL/XLO) IN. 0. 0000110. 000110. 001, AUTOMATIC, FEED ROUGH INFEED IN. O-O. 0025(13STEOS>, FINE INFEED IN. O-O. 0005 C 7STEOS), FINE GRINDING ALLOWANCE IN. O-O. 002 C 6STEOS >, AIR-CUT FEED (ROUGH/FINE) IN. 0-999. 99999/0-999. 99999, NUMBER OF SPARK OUT NO. 0-5, GRINDING DIAMETER X WIDTH X BORE IN. 20X3X8, WHEEL SPEED (60HZ) RPM 1100, MOTOR GRINDING WHEEL SPINDLE HP/P 20/6, HYDRAULIC OIL PUMP ('V' DRESSER) HP/P 0. 5/2, VERTICAL FEED (AC SERVO MOTOR) HP 1. 2, CROSS FEED (AC SERVO MOTOR) HP 1. 2, POWER SUPPLY 230/460V, 3D. 60HZ, 22KVA, FLOOR SPACE LENGTH X WIDTH X HEIGHT IN. 179X128X99, MACHINE WEIGHT NET LBS. 22000, EQUIPPED WITH, FANUC CNC CONTROL, 24 " X 40" ELECTRO MAGNETIC CHUCKK, DIAMOND FORM DRESSER, OVER THE WHEED DRESSER, (2) GRINDING WHEEL (SAMPLE) 1 PC, (3) WHEEL FLANGE: 1 SET, ( 5) SPLASHGUARD: 1 SET, (6) JACK BOLTS: 1 SET, (8) WHEEL DRESSER (WITH AUTOMATIC DRESSING COMPENSATION FUNCTION AND A DIAMOND TOOL LET) 1 SET, (9) AUTOMATIC DEMAGNETIZE CONTROLLER INPUT AC230/460V, OUTPUT DCLOOV, (10) COOLANT UNIT,

2007 MAG FADAL VMC 2216FX CNC VERTICAL MACHINING CENTER NUMBER OF AXES 3 RAPID TRAVERSE (X,Y,Z) 1000 SPINDLE MOTOR CONT. 15 SPINDLE SPEED 8000 SPINDLE TAPER 40 TABLE SIZE 39 X 16 TRAVEL (X) 22 TRAVEL (Y) 16 TRAVEL (Z) 20 ATC 21 CONTROL FANUC 0I-MC MACHINE DIMENSIONS 98 X 83 X 97 MACHINE WEIGHT 8300 MAX WEIGHT ON TABLE 2006 EQUIPPED WITH: COOLANT SYSTEM VISES NOT INCLUDED (VISES SOLD IN LOTS 22-34)

2005 FADAL VMC 2216L CNC VERTICAL MACHINING CENTER5017278 LONGITUDINAL (X AXIS) TRAVEL: 20? CROSS (Y AXIS) TRAVEL: 16? VERTICAL (Z AXIS) TRAVEL: 28? TABLE SIZE: 29.5? X 16? FLOOR TO TABLE: 30.5? CUTTING FEED RATE: 0.01-250 IPM (375 @ 150%) RAPID FEED RATE (X/Y/Z): 500 IPM (X/Y/Z) MAX. WEIGHT ON TABLE: 2,000 LBS. SPINDLE NOSE TO TABLE: 4?- 32? SPINDLE CENTER TO COLUMN WAYS: 17? MAIN MOTOR (AUTO 2 SPEED VECTOR): 15 HP, 11.2 KW SPINDLE SPEED 7,500 RPM SPINDLE TAPER: 40 AUTO TOOL CHANGER: 20 + 1 ATC, TOOL SELECTION: RANDOM, BI-DIRECTIONAL MAX. TOOL DIAMETER: 3? (4.5? W/O ADJACENT TOOLS) POWER: 230/440 VAC, 3 PH, 60 HZ MACHINE DIMENSIONS (L X W X H): 77? X 75? X 101? MACHINE WEIGHT 5,800 LBS. EQUIPPED WITH: FADAL CNC 32MULTI PROCESSOR CONTROL COOLANT SYSTEM EXTRA SPINDLE MOTOR MODEL # BSM90B-3136 SPL VISES NOT INCLUDED (VISES SOLD IN LOTS 22-34)

LAPMASTER 15C LAPPING MACHINE WITH CART STANDARD SPECIFICATIONS HIGH DENSITY, CAST IRON RADIALLY SERRATED LAP PLATE 381 MM O.D. 88.9 MM I.D. / 15? O.D. 31/2? I.D. THREE HIGH DENSITY CAST IRON SERRATED CONDITIONING RINGS 178 MM O.D. 140 MM I.D. / 7? O.D. 51/2? I.D. THREE HIGH DENSITY CAST IRON PRESSURE PLATES WITH LIFTING EYE-BOLTS 57/16? DIA. 11/4? THICK / 138 MM DIA. 32 MM THICK 15? / 381 MM HARDENED STEEL STRAIGHT EDGE THREE MICARTA WORK HOLDER BLANK DISCS 57/16? DIA. 1/8? THICK / 138 MM DIA. 3.2 MM THICK THREE PRESSURE PADS 57/16? DIA. 1/2? THICK / 138 MM DIA. X 13 MM THICK STARTER SAMPLE LAPMASTER ABRASIVE STARTER SAMPLE LAPMASTER VEHICLE ALLEN WRENCH VINYL MACHINE COVER APPROXIMATE WEIGHT 135 LBS / 61 KG APPROXIMATE DIMENSIONS 26.3? 20.5? 23.9? 668 MM 521 MM 607 MM CABINET WITH SPARE PARTS AND WHEELS INCLUDED

POWER BUS 225 BUSWAY BUS BAR, APPROX 30' INCLUDING (1) SPARE BUSWAY PLUG-IN UNITS 225 AMP, 240 VOLT AC, 4 WIRE (3) 10' UNITS

HAAS HA5C4 4-SPINDLE ROTARY TABLE WITH SERVO CONTROL BOX. THE HA5C4 IS A SINGLE-AXIS ROTARY UNIT WITH FOUR 5C COLLET NOSES. CLAMP YOUR PARTS USING STANDARD 5C COLLETS, OR CHUCK THEM BY THREADING 3-JAW CHUCKS TO THE SPINDLE NOSES. HAAS SERVO CONTROL BOX

THERMOLYNE F6020C FURNACE WITH CART FEATURES AN 860 CUBIC INCH HEATING CHAMBER, WIDTH 12 3/4 INCHES WIDE X 6 3/4 HIGH X 10 INCHES DEEP. EMBEDDED HEATING ELEMENTS PROVIDE UNIFORM CHAMBER GRADIENT. MAXIMUM OPERATING TEMPERATURE IS 1093C. FOUR TEMPERATURE CONTROL OPTIONS: A. SINGLE SETPOINT ANALOG CONTROL B. SINGLE SETPOINT DIGITAL CONTROL WITH OTP ALARM. C. DESIGNED FOR COAL AND COKE ANALYSIS PROCEDURES. ENLARGED TOP VENT CONNECTS EASILY TO EXHAUST SYSTEMS FOR VENTILATION OF CONTAMINANTS HEATING ELEMENTS CAN BE REPLACED INDIVIDUALLY, CUTTING DOWN ON OPERATIONAL COST FURNACES COME WITH AN ADJUSTABLE GAS FLOW METER/VALVE (080L/MIN.) LOCATED ON THE FRONT FOR EASY ADJUSTMENT OF AIRFLOW RATE TYPE 6000 FURNACE MEETS ASTM D3174. STAINLESS STEEL MANIFOLD AT REAR CHAMBER PRE-WARMS INCOMING GASES PROVIDING MAXIMUM TEMPERATURE GRADIENT OF ONLY 3C AT 750C (1382F). HEATING ELEMENTS ARE ENVELOPED IN A CUSTOM FORMED REFRACTORY CEMENT, REDUCING THE DAMAGE CAUSED BY CONTAMINANT BUILD-UP ON THE RESISTANT WIRE.

BRIDGEPORT MILLING MACHINE8 TABLE SIZE: 9" X 42" LONGITUDINAL TRAVEL: 30" CROSS SADDLE TRAVEL: 12" VERTICAL KNEE TRAVEL: 16" SPINDLE SPEEDS (INFINITELY VARIABLE): 60 - 4200 RPM SPINDLE NOSE: R-8 SPINDLE QUILL TRAVEL: 5" SPINDLE QUILL FEEDS (3): 0.006" / 0.003" / 0.0015" RAM TRAVEL: 12" MOTOR HP: 1.5 ACU-RITE DRO VISE, COLLETS, POWER FEED, BRIDGEPORT QUILL MASTER

2000 FADAL VMC 2216L CNC VERTICAL MACHINING CENTER S/N: 0121831 LONGITUDINAL (X AXIS) TRAVEL: 20? CROSS (Y AXIS) TRAVEL: 16? VERTICAL (Z AXIS) TRAVEL: 28? TABLE SIZE: 29.5? X 16? FLOOR TO TABLE: 30.5? CUTTING FEED RATE: 0.01-250 IPM (375 @ 150%) RAPID FEED RATE (X/Y/Z): 500 IPM (X/Y/Z) MAX. WEIGHT ON TABLE: 2,000 LBS. SPINDLE NOSE TO TABLE: 4?- 32? SPINDLE CENTER TO COLUMN WAYS: 17? MAIN MOTOR (AUTO 2 SPEED VECTOR): 15 HP, 11.2 KW SPINDLE SPEED 7,500 RPM SPINDLE TAPER: 40 AUTO TOOL CHANGER: 20 + 1 ATC, TOOL SELECTION: RANDOM, BI-DIRECTIONAL MAX. TOOL DIAMETER: 3? (4.5? W/O ADJACENT TOOLS) POWER: 230/440 VAC, 3 PH, 60 HZ MACHINE DIMENSIONS (L X W X H): 77? X 75? X 101? MACHINE WEIGHT 5,800 LBS. EQUIPPED WITH: FADAL CNC 32MULTI PROCESSOR CONTROL COOLANT SYSTEM VISES NOT INCLUDED (VISES SOLD IN LOTS 22-34)

CALTEX SYSTEMS VZM-2000HP HIGH POWER VIDEO ZOOM INSPECTION MEASUREMENT SYSTEM WITH ACE 1 CONTROLLER 30X-200X ON STANDARD ZOOM LENS ADD ON INTERCHANGEABLE HIGH POWER 10X INFINITY OBJECTIVE LENS FOR 300X-2,000X IN SECONDS EXPANDABLE ZOOM TO 7X-10,000X WITH ADDITIONAL ADAPTER LENSES REAL-TIME DIRECT VIEWING ON COMPUTER AND LCD PERFECT FOR IC WAFER, METALLURGIC, CROSS SECTION APPLICATIONS

MITUTOYO SURFTEST ST-210 SURFACE ROUGHNESS TESTER

VISION ENGRAVING SYSTEM 1612 PRO ENGRAVER7110M SOFTWARE VISION EXPRESS PRO MAX. WORK AREA 16X12 MAXIMUM WORK PIECE SIZE 18.5(L) X ANY WIDTH X 5(H) Z-AXIS CLEARANCE 1.75 INCH (44.45 MM) Z-AXIS STROKE 1.75 STANDARD (3.375 W/RISER KIT) TABLE RESOLUTION .0002 SPINDLE TYPE 11/64, 6MM OR 1/4 / TOP LOADING, COLLET SPINDLE AVAILABLE TABLE TYPE ALUMINUM T-SLOT INTERFACE ETHERNET CONTROLLER SERIES 5 HIGH SPEED-CONTROLLER WITH V-TOUCH PENDANT WARRANTY 2-YEAR LIMITED POWER REQUIREMENTS 110/220V 5 AMP PHYSICAL DIMENSIONS 31.5(W) X 21(D) X 19(H) 200 LBS VISION ENGRAVING SYSTEM SERIES 3 CONTROL

HEAVY DUTY TOOL CABINET WITH CONTENTS HAND TOOLS, C-CLAMPS, WRENCHES, FILES

CENTROID RT-100 4TH AXIS ROTARY TABLE WITH CONTROLLER, SN 1249 3.9IN TABLE DIAMETER (100MM) AUTO HOME SWITCH PNEUMATIC BRAKE 360 ROTATION IN 2.7 SECONDS, DC SERVO EQUIPPED WITH: CENTROID DX1-AC SN 1029 CONTROLLER, CENTROID TAILSTOCK, MOUNTING PLATE, FIXTURE NOT INCLUDED

TOOL CART WITH APPROX. (48) 40-TAPER TOOL HOLDERS AND TOOL LOCK DEVICE

WOOD TOP WORK BENCH WITH LIGHT, ELECTRICAL OUTLETS AND BINS NO CONTENTS

POWER BUS 225 BUSWAY BUS BAR, APPROX 30' INCLUDING (2) SPARE BUSWAY PLUG-IN UNITS 225 AMP, 240 VOLT AC, 4 WIRE (3) 10' UNITS

POWER BUS 225 BUSWAY BUS BAR, APPROX 30' INCLUDING (2) SPARE BUSWAY PLUG-IN UNITS 225 AMP, 240 VOLT AC, 4 WIRE (3) 10' UNITS

WOOD TOP WORK BENCH WITH LIGHT, ELECTRICAL OUTLETS AND BINS NO CONTENTS

WOOD TOP WORK BENCH WITH LIGHT, ELECTRICAL OUTLETS AND BINS NO CONTENTS

ATLAS COPCO GX11 AIR COMPRESSOR AIR DRYER, MOTOR VOLTAGE 208-230/460 VOLT AC, PHASE 3-PHASE, AMP DRAW CONSULT CERTIFIED ELECTRICIAN, RECOMMENDED BREAKER CONSULT CERTIFIED ELECTRICIAN, ENGINE HP 15, PUMP CFM 52.3 CFM RATED @ 130 PSI, MAX PSI 125 PSI, PUMP TYPE ROTARY, AFTER COOLER YES, OIL TYPE OIL LUBRICATED, OIL SYSTEM SPLASH LUBRICATED, TANK SIZE 71 GALLONS, TANK OUTLET 1/2 INCH, ELECTRONIC DRAIN VALVE NO, TANK ORIENTATION HORIZONTAL, ACCESSORIES AIR DRYER YES, AIR FILTER NO, WEIGHT 765 POUNDS S/N:ALL164252

NEXTJEN TECHNOLOGIES C-THRU SEPARATOR COOLANT SKIMMERS WITH PUMPS THE C-THRU SEPARATOR IS A UNIQUE, PATENTED UNIT DESIGN TO REMOVE SOLID AND LIQUID CONTAMINATION FROM COOLANTS AND CLEANERS THROUGHOUT THE METALWORKING AND PRETREATMENT INDUSTRIES.

TAYLOR-WHARTON 25LD EXTREME COLD 25 LITER LIQUID NITROGEN CONTAINER

NIKON OPTIPHOT MICROSCOPE WITH (4) LENSES 20X, 30X, 50X, AND 100X LENSES NIKON XN TRANSFORMER

WOOD TOP WORK BENCH WITH LIGHT, ELECTRICAL OUTLETS AND BINS NO CONTENTS

TOOL CART WITH MISC. MITUTOYO AND STARRETT MICS AND INSPECTION EQUIPMENT

WATERLOO TOOL CART WITH CONTENTS INCLUDING KENNAMETAL TOOLING AND MORE - WATERLOO TOOL CART WITH CONTENTS INCLUDING KENNAMETAL TOOLING (2) UNUSED 40 TAPER TOOL HOLDERS, HAND TOOLS, HAMMERS

WATERLOO TOOL CART WITH CONTENTS, HAND TOOLS, WRENCHES,

HARDINGE HC COLLET CHUCKER SECOND OPERATION TOOLROOM LATHE - HARDINGE HC TOOL ROOM LATHE SPINDLE CAPACITY WITH ROUND 5C COLLETS 1-1/6" WITH HEXAGON 5C COLLETS 7/8" WITH SQUARE 5C COLLETS 3/4" WITH 5C STEP CHUCKS 6" WITH JAW CHUCKS 6" SPINDLE NOSE DIAMETER 2.189" SPINDLE NOSE THREAD 2-3/16" RH SPINDLE SPEEDS 125-3000 RPM MAX. FIXTURE DIAMETER 9" MAX. DIAMETER FOR THREADING 6" EXT/5"INTERNAL CROSS SLIDE TRAVEL 4.5" BED WIDTH 6" MOTOR 1.5 HP MACHINE WEIGHT 1,750 LBS EQUIPPED WITH: (3) 3-JAW CHUCKS, TOOL POST, COLLETS, MISC. TOOLING

CABINET WITH CONTENTS MISC. DRILL BITS

THERMCRAFT INC. 107939 MARSHALL TUBULAR FURNACE. MAX TEMP 2000 DEG F. HEATER CHAMBER (ID X HL) 5" X 35.5". FURNACE SIZE (OD X OAL) 14" X 38". 12 TAPS. 220V. 5190 WATTS

WOOD TOP WORK BENCH WITH LIGHT, ELECTRICAL OUTLETS AND BINS NO CONTENTS

BOYAR SCHULTZ SIX TWELVE DELUXE SURFACE GRINDER TABLE TRAVEL LONGITUDINAL 13" CROSS FEED 7" WORK HEIGHT (USING 7" DIAMETER WHEEL) 0 TO 11-1/4" TABLE WORKING SURFACE (T-SLOT, 3/8" WIDTH) 12" TO 5-5/8" GRINDING WHEEL DIAMETER 7" THICKNESS 3/16" TO 1/2" HOLE DIAMETER 1-1/4" SPINDLE SPEED 3,000 RPM HANDWHEEL GRADUATION VERTICAL .0005" CROSS FEED .001" OVERALL DIMENSIONS 43" X 38" X 62" HIGH APPROXIMATE NET WEIGHT 415 LBS. MOTOR SPECIFICATIONS 1/2 HP, 3450 RPM SPINDLE MOTOR EQUIPPED WITH: STC ELECTROMAGNETIC CHUCK, MISC. GRINDING WHEELS

KURT HDLM6 6" HIGH DENSITY DOUBLE STATION VISE FEATURES: TWO CLAMPING STATIONS REPEATABLE CLAMPING TO 0.0002". MAXIMUM CLAMPING FORCE OF 5,870LBS FOR 4" VISES AND 7,460LBS FOR 6" VISES PRE-LOADING FRONT AND BACK JAWS THAT HOLD YOUR WORKPIECES IN PLACE AS YOU ADJUST THE JAWS MULTIPLE JAW OPTIONS ALLOW FOR COMPLETE CUSTOMIZATION CONSTRUCTED OF RUGGED, 80,000 PSI DUCTILE IRON BODY WITH STEEL COMPONENTS FULL 3 AND 4 INCH OPENING IN EACH STATION WITH STANDARD HARD JAW SYSTEM. JAWS ARE INDEXABLE 180 DEGREES. MANUAL AND HYDRAULIC MODELS AVAILABLE. FAST EASY CONVERSION BETWEEN MANUAL AND HYDRAULIC MODELS. PART #HDHLM4-3-SA-KIT (4 INCH) & #HDHLM6-3-SA-KIT (6 INCH) MAXIMIZES THE NUMBER OF PARTS IN THE WORK ENVELOPE. ADJUSTABLE PRE-LOAD FEATURE ALLOWS YOU TO MINIMIZE PRE-LOAD RANGE THUS REDUCING THE TURNS OF THE HANDLE TO OPEN OR CLOSE THE VISE (MANUAL VERSION). HOLDING BLOCK FEATURES THE ABILITY TO CLAMP SAME OR DISSIMILAR SIZED PARTS AND PROVIDES PRE LOADING ABILITY IN THE FRONT OR BACK JAW (MANUAL VERSION). BED HEIGHT TOLERANCE 0.001"

KURT HDLM6 6" HIGH DENSITY DOUBLE STATION VISE FEATURES: TWO CLAMPING STATIONS REPEATABLE CLAMPING TO 0.0002". MAXIMUM CLAMPING FORCE OF 5,870LBS FOR 4" VISES AND 7,460LBS FOR 6" VISES PRE-LOADING FRONT AND BACK JAWS THAT HOLD YOUR WORKPIECES IN PLACE AS YOU ADJUST THE JAWS MULTIPLE JAW OPTIONS ALLOW FOR COMPLETE CUSTOMIZATION CONSTRUCTED OF RUGGED, 80,000 PSI DUCTILE IRON BODY WITH STEEL COMPONENTS FULL 3 AND 4 INCH OPENING IN EACH STATION WITH STANDARD HARD JAW SYSTEM. JAWS ARE INDEXABLE 180 DEGREES. MANUAL AND HYDRAULIC MODELS AVAILABLE. FAST EASY CONVERSION BETWEEN MANUAL AND HYDRAULIC MODELS. PART #HDHLM4-3-SA-KIT (4 INCH) & #HDHLM6-3-SA-KIT (6 INCH) MAXIMIZES THE NUMBER OF PARTS IN THE WORK ENVELOPE. ADJUSTABLE PRE-LOAD FEATURE ALLOWS YOU TO MINIMIZE PRE-LOAD RANGE THUS REDUCING THE TURNS OF THE HANDLE TO OPEN OR CLOSE THE VISE (MANUAL VERSION). HOLDING BLOCK FEATURES THE ABILITY TO CLAMP SAME OR DISSIMILAR SIZED PARTS AND PROVIDES PRE LOADING ABILITY IN THE FRONT OR BACK JAW (MANUAL VERSION). BED HEIGHT TOLERANCE 0.001"

KURT HDLM6 6" HIGH DENSITY DOUBLE STATION VISE FEATURES: TWO CLAMPING STATIONS REPEATABLE CLAMPING TO 0.0002". MAXIMUM CLAMPING FORCE OF 5,870LBS FOR 4" VISES AND 7,460LBS FOR 6" VISES PRE-LOADING FRONT AND BACK JAWS THAT HOLD YOUR WORKPIECES IN PLACE AS YOU ADJUST THE JAWS MULTIPLE JAW OPTIONS ALLOW FOR COMPLETE CUSTOMIZATION CONSTRUCTED OF RUGGED, 80,000 PSI DUCTILE IRON BODY WITH STEEL COMPONENTS FULL 3 AND 4 INCH OPENING IN EACH STATION WITH STANDARD HARD JAW SYSTEM. JAWS ARE INDEXABLE 180 DEGREES. MANUAL AND HYDRAULIC MODELS AVAILABLE. FAST EASY CONVERSION BETWEEN MANUAL AND HYDRAULIC MODELS. PART #HDHLM4-3-SA-KIT (4 INCH) & #HDHLM6-3-SA-KIT (6 INCH) MAXIMIZES THE NUMBER OF PARTS IN THE WORK ENVELOPE. ADJUSTABLE PRE-LOAD FEATURE ALLOWS YOU TO MINIMIZE PRE-LOAD RANGE THUS REDUCING THE TURNS OF THE HANDLE TO OPEN OR CLOSE THE VISE (MANUAL VERSION). HOLDING BLOCK FEATURES THE ABILITY TO CLAMP SAME OR DISSIMILAR SIZED PARTS AND PROVIDES PRE LOADING ABILITY IN THE FRONT OR BACK JAW (MANUAL VERSION). BED HEIGHT TOLERANCE 0.001"

KURT HDLM6 6" HIGH DENSITY DOUBLE STATION VISE FEATURES: TWO CLAMPING STATIONS REPEATABLE CLAMPING TO 0.0002". MAXIMUM CLAMPING FORCE OF 5,870LBS FOR 4" VISES AND 7,460LBS FOR 6" VISES PRE-LOADING FRONT AND BACK JAWS THAT HOLD YOUR WORKPIECES IN PLACE AS YOU ADJUST THE JAWS MULTIPLE JAW OPTIONS ALLOW FOR COMPLETE CUSTOMIZATION CONSTRUCTED OF RUGGED, 80,000 PSI DUCTILE IRON BODY WITH STEEL COMPONENTS FULL 3 AND 4 INCH OPENING IN EACH STATION WITH STANDARD HARD JAW SYSTEM. JAWS ARE INDEXABLE 180 DEGREES. MANUAL AND HYDRAULIC MODELS AVAILABLE. FAST EASY CONVERSION BETWEEN MANUAL AND HYDRAULIC MODELS. PART #HDHLM4-3-SA-KIT (4 INCH) & #HDHLM6-3-SA-KIT (6 INCH) MAXIMIZES THE NUMBER OF PARTS IN THE WORK ENVELOPE. ADJUSTABLE PRE-LOAD FEATURE ALLOWS YOU TO MINIMIZE PRE-LOAD RANGE THUS REDUCING THE TURNS OF THE HANDLE TO OPEN OR CLOSE THE VISE (MANUAL VERSION). HOLDING BLOCK FEATURES THE ABILITY TO CLAMP SAME OR DISSIMILAR SIZED PARTS AND PROVIDES PRE LOADING ABILITY IN THE FRONT OR BACK JAW (MANUAL VERSION). BED HEIGHT TOLERANCE 0.001"

KURT HDLM6 6" HIGH DENSITY DOUBLE STATION VISE FEATURES: TWO CLAMPING STATIONS REPEATABLE CLAMPING TO 0.0002". MAXIMUM CLAMPING FORCE OF 5,870LBS FOR 4" VISES AND 7,460LBS FOR 6" VISES PRE-LOADING FRONT AND BACK JAWS THAT HOLD YOUR WORKPIECES IN PLACE AS YOU ADJUST THE JAWS MULTIPLE JAW OPTIONS ALLOW FOR COMPLETE CUSTOMIZATION CONSTRUCTED OF RUGGED, 80,000 PSI DUCTILE IRON BODY WITH STEEL COMPONENTS FULL 3 AND 4 INCH OPENING IN EACH STATION WITH STANDARD HARD JAW SYSTEM. JAWS ARE INDEXABLE 180 DEGREES. MANUAL AND HYDRAULIC MODELS AVAILABLE. FAST EASY CONVERSION BETWEEN MANUAL AND HYDRAULIC MODELS. PART #HDHLM4-3-SA-KIT (4 INCH) & #HDHLM6-3-SA-KIT (6 INCH) MAXIMIZES THE NUMBER OF PARTS IN THE WORK ENVELOPE. ADJUSTABLE PRE-LOAD FEATURE ALLOWS YOU TO MINIMIZE PRE-LOAD RANGE THUS REDUCING THE TURNS OF THE HANDLE TO OPEN OR CLOSE THE VISE (MANUAL VERSION). HOLDING BLOCK FEATURES THE ABILITY TO CLAMP SAME OR DISSIMILAR SIZED PARTS AND PROVIDES PRE LOADING ABILITY IN THE FRONT OR BACK JAW (MANUAL VERSION). BED HEIGHT TOLERANCE 0.001". MISSING HANDLE

KURT HDLM6 6" HIGH DENSITY DOUBLE STATION VISE FEATURES: TWO CLAMPING STATIONS REPEATABLE CLAMPING TO 0.0002". MAXIMUM CLAMPING FORCE OF 5,870LBS FOR 4" VISES AND 7,460LBS FOR 6" VISES PRE-LOADING FRONT AND BACK JAWS THAT HOLD YOUR WORKPIECES IN PLACE AS YOU ADJUST THE JAWS MULTIPLE JAW OPTIONS ALLOW FOR COMPLETE CUSTOMIZATION CONSTRUCTED OF RUGGED, 80,000 PSI DUCTILE IRON BODY WITH STEEL COMPONENTS FULL 3 AND 4 INCH OPENING IN EACH STATION WITH STANDARD HARD JAW SYSTEM. JAWS ARE INDEXABLE 180 DEGREES. MANUAL AND HYDRAULIC MODELS AVAILABLE. FAST EASY CONVERSION BETWEEN MANUAL AND HYDRAULIC MODELS. PART #HDHLM4-3-SA-KIT (4 INCH) & #HDHLM6-3-SA-KIT (6 INCH) MAXIMIZES THE NUMBER OF PARTS IN THE WORK ENVELOPE. ADJUSTABLE PRE-LOAD FEATURE ALLOWS YOU TO MINIMIZE PRE-LOAD RANGE THUS REDUCING THE TURNS OF THE HANDLE TO OPEN OR CLOSE THE VISE (MANUAL VERSION). HOLDING BLOCK FEATURES THE ABILITY TO CLAMP SAME OR DISSIMILAR SIZED PARTS AND PROVIDES PRE LOADING ABILITY IN THE FRONT OR BACK JAW (MANUAL VERSION). BED HEIGHT TOLERANCE 0.001"