Snack Food Processing and Packaging Eqpt Auction
Category: PACKAGING EQUIPMENT
Total Lots:
261
Total Sales:
🔒 Subscribe
Price Distribution
| Year | Make | Model | Lot Description | Hammer Price | |
|---|---|---|---|---|---|
|
LANTECH | C-1000 |
LANTECH C-1000 TAPE BOTTOM SEAL RIGHT HAND CASE ERECTOR - USED LANTECH C-1000 CASE ERECTOR WITH: AUTOMATIC TAPE BOTTOM CASE SEALER 2 INCH TAPE HEAD MAGAZINE INFEED CAPACITY: APPROXIMATELY 200 CASES OUTPUT: UP TO 30 CASES PER MINUTE, DEPENDING ON CASE SIZE MINIMUM CASE DIMENSIONS: LENGTH: 7.875 INCHES WIDTH: 5.875 INCHES HEIGHT: 5.875 INCHES MAXIMUM CASE DIMENSIONS: LENGTH: 19.625 INCHES WIDTH: 12.75 INCHES HEIGHT: 20.5 INCHES CASE ORIENTATION: RIGHT HAND LEFT SIDE FLOW CASE TYPE: RSC HSC FEFCO 0200/0201 FLUTE TYPE: B, C, E WALL TYPE: SINGLE AND DOUBLE WALL ELECTRICAL: 230 VOLTS, 60 HZ, PHASE 3
|
🔒 Subscribe | |
|
|
FELDMEIER | 1000 GALLON JACKETED STAINLESS STEEL MIXING TANK |
1000 GALLON FELDMEIER JACKETED STAINLESS STEEL MIXING TANK - USED FELDMEIER JACKETED STAINLESS STEEL MIXING TANK WITH: CAPACITY: 1000 GALLON JACKET MAWP: 100 PSI AT 300 ...F JACKET MDMT: -20 ...F AT 100 PSI MOC SHELL: 316L MOC JACKET: 304 MANWAY DIAMETER: 18 INCHES FIVE 2-INCH PORTS ON TOP CENTER SANITARY DRAIN DIAMETER: 3 INCHES TANK DIMENSIONS: STRAIGHT WALL: 59 INCHES DIAMETER: 74 INCHES
|
🔒 Subscribe | |
|
|
FELDMEIER |
FELDMEIER 650 GALLON JACKETED STAINLESS STEEL MIXING TANK - USED JACKETED STAINLESS STEEL MIXING TANK WITH: CAPACITY: 650 GALLON MANWAY DIAMETER: 19 INCHES INLET / OUTLET: (1) 4.5INCHES, (3) 3.5 INCHES, (1) 2.5 INCHES 3-INCH CENTER DISCHARGE TANK DIMENSIONS: STRAIGHT WALL: 39 INCHES DIAMETER: 74 INCHES
|
🔒 Subscribe | ||
|
|
FELDMEIER | MIXING TANK |
500 GALLON FELDMEIER STAINLESS STEEL MIXING TANK - USED FELDMEIER STAINLESS STEEL MIXING TANK WITH: CAPACITY: 500 GALLON MANWAY DIAMETER: 17 INCHES TANK DIMENSIONS: STRAIGHT WALL: 42 INCHES DIAMETER: 62 INCHES JACKET MAWP: 100 PSI AT 300 JACKET MDMT: -20... F AT 100 PSI MOC SHELL: 316L MOC JACKET: 304 OVERALL DIMENSIONS: LENGTH: 110 INCHES WIDTH: 66 INCHES HEIGHT: 92 INCHES
|
🔒 Subscribe | |
|
|
BASTIAN SOLUTIONS | CONTROL PANEL |
BASTIAN SOLUTIONS CONTROL PANEL WITH ALLEN BRADLEY POWER FLEX 525. OVERALL DIMENSIONS: LENGTH: 132 INCHES, WIDTH: 20 INCHES, HEIGHT: 72 INCHES.
|
🔒 Subscribe | |
|
|
MERITECH | XBW |
MERITECH XBW SOLES-ONLY FOOTWARE SANITIZER MACHINE WITH: SUPPORTING UP TO 12-15 USERS PER MINUTE BIDIRECTIONAL PHOTO EYE OPERATION ADJUSTABLE SOLE DEPTH MAIN POWER SHUT-OFF SWITCH NON-SLIP SURFACES OVERALL DIMENSIONS: LENGTH: 90 INCHES WIDTH: 45 INCHES HEIGHT: 62 INCHES ELECTRICAL REQUIREMENTS: 120 VOLTS/ 50-60 HERTZ
|
🔒 Subscribe | |
|
|
UNIVERSAL | TA4 |
UNIVERSAL TA4 WRAPAROUND PRESSURE SENSITIVE LABELER CONTOURED PRODUCT CAPABLE - USED UNIVERSAL TA4 WRAP UNIT LABELER WITH: SPEED: UP TO 3000 INCHES PER MINUTE (DEPENDING ON PRODUCT SPECIFICATIONS) TILTING HOLD DOWN PLATE CAN BE ADJUSTED FOR CONTOURED PRODUCTS FILM CORE: 3 INCHES MAXIMUM FILM WIDTH: 6 INCHES GRIPPER BELT HEIGHT: 4 INCHES CONVEYOR DIMENSIONS: LENGTH: 120 INCHES WIDTH: 6 INCHES ANALOG DIAL CONTROLS MOUNTED ON CASTERS ELECTRICAL: 115 VOLTS, SINGLE PHASE, 60 HZ
|
🔒 Subscribe | |
|
|
RYSON | 1600-500-A1-3 |
RYSON SPIRAL INCLINE CONVEYOR - USED RYSON SPIRAL CONVEYOR WITH: CONVEYOR WIDTH: 19.5 INCHES MODEL: 1600-500-A1-3 OVERALL DIMENSIONS: LENGTH: 105 INCHES WIDTH: 91.5 INCHES HEIGHT: 95 INCHES
|
🔒 Subscribe | |
|
|
MERITECH | XBW |
MERITECH XBW SOLES-ONLY FOOTWARE SANITIZER MACHINE WITH: SUPPORTING UP TO 12-15 USERS PER MINUTE BIDIRECTIONAL PHOTO EYE OPERATION ADJUSTABLE SOLE DEPTH MAIN POWER SHUT-OFF SWITCH NON-SLIP SURFACES OVERALL DIMENSIONS: LENGTH: 90 INCHES WIDTH: 45 INCHES HEIGHT: 62 INCHES ELECTRICAL REQUIREMENTS: 120 VOLTS/ 50-60 HERTZ
|
🔒 Subscribe | |
|
|
12.5" WIDE X 195" LONG CLEATED BLUE BELT INCLINE CONVEYOR - USED BLUE BELT INCLINE CONVEYOR WITH: CLEAT DIMENSIONS: HEIGHT: 4 INCHES DISTANCE BETWEEN CLEATS: 4.5 INCHES CONVEYOR DIMENSIONS: LENGTH: 195 INCHES WIDTH:12.5 INCHES OVERALL DIMENSIONS: LENGTH: 195 INCHES WIDTH: 42 INCHES HEIGHT: 60 INCHES
|
🔒 Subscribe | |||
|
|
RYSON | 1600-500-B1-2.25 |
RYSON SPIRAL INCLINE CONVEYOR - USED RYSON SPIRAL CONVEYOR WITH: MODEL: 1600-500-B1-2.25 BELT WIDTH: 19.5 INCHES OUTFEED HEIGHT: 105 INCHES INFEED HEIGHT: 15 INCHES OVERALL DIMENSIONS: LENGTH: 115 INCHES WIDTH: 90 INCHES HEIGHT: 96 INCHES
|
🔒 Subscribe | |
|
|
20" W X 120" L CONVEYOR FRAME W SMOOTH TOP BELTING AND INTERROLL ZONE CONTROL. ROLLER WIDTH: 20 INCHES. CONVEYOR DIMENSIONS: LENGTH: 120 INCHES. WIDTH: 24 INCHES.
|
🔒 Subscribe | |||
|
|
RYSON | 1600-500-B1-2.25 |
RYSON SPIRAL INCLINE CONVEYOR - USED RYSON SPIRAL CONVEYOR WITH: MODEL: 1600-500-B1-2.25 BELT WIDTH: 19.5 INCHES OVERALL DIMENSIONS: LENGTH: 107 INCHES WIDTH: 90 INCHES HEIGHT: 95 INCHES
|
🔒 Subscribe | |
|
|
RYSON | SPIRAL INCLINE CONVEYOR |
[RYSON SPIRAL INCLINE CONVEYOR] USED RYSON SPIRAL CONVEYOR WITH: CONVEYOR WIDTH: 20 INCHES INFEED HEIGHT: 15 INCHES OUTFEED HEIGHT: 90 INCHES OVERALL DIMENSIONS: LENGTH: 115 INCHES WIDTH: 90 INCHES HEIGHT: 96 INCHES
|
🔒 Subscribe | |
|
|
RYSON | SPIRAL DECLINE CONVEYOR |
RYSON SPIRAL DECLINE CONVEYOR - USED RYSON SPIRAL CONVEYOR WITH: BELT WIDTH: 19.5 INCHES OVERALL DIMENSIONS: LENGTH: 85 INCHES WIDTH: 91 INCHES HEIGHT: 96 INCHES
|
🔒 Subscribe | |
|
|
MARKEM-IMAJE | 9410 |
MARKEM-IMAJE 9410 STAINLESS STEEL CONTINUOUS INKJET PRINTER - USED MARKEM-IMAJE 9410 CONTINUOUS INKJET CODER WITH: MONO-JET PRINTHEAD G HEAD (PRINTING RESOLUTION: 71 DPI) UP TO 5 LINES OF PRINT PRINT SPEED: UP TO 4.6 M/S ON STAINLESS STEEL CART FONT HEIGHT: 5 TO 32 DOTS CHARACTER HEIGHT: FROM 1.2 TO 11 MM TABLE-TOP OR VERTICAL MOUNTING OPERATING TEMPERATURE RANGE: 0 TO 40...C DEPENDING ON INK USED OVERALL DIMENSIONS: LENGTH: 32 INCHES WIDTH: 17 INCHES HEIGHT: 55 INCHES ELECTRICAL REQUIREMENTS: 100-120 V OR 200-240 V WITH AUTOMATIC SWITCHING 50/60 HZ POWER 60 VA STAINLESS STEEL CABINET AND PRINTHEAD CASE
|
🔒 Subscribe | |
|
|
RYSON | 1600-500-B1-2.25 |
RYSON SPIRAL INCLINE CONVEYOR - USED RYSON SPIRAL CONVEYOR WITH: MODEL: 1600-500-B1-2.25 BELT WIDTH: 20 INCHES INFEED HEIGHT: 15 INCHES OUTFEED HEIGHT: 99 INCHES OVERALL DIMENSIONS: LENGTH: 90 INCHES WIDTH: 116 INCHES HEIGHT: 96 INCHES EQUIPMENT WILL BE LOADED AS IS.
|
🔒 Subscribe | |
|
|
RYSON | 1600-500-B1-2.25 |
RYSON SPIRAL INCLINE CONVEYOR - USED RYSON SPIRAL CONVEYOR WITH: MODEL: 1600-500-B1-2.25 INFEED HEIGHT: 15 INCHES OUTFEED HEIGHT: 98 INCHES BELT WIDTH: 19.5 INCHES OVERALL DIMENSIONS: LENGTH: 116 INCHES WIDTH: 90 INCHES HEIGHT: 98 INCHES
|
🔒 Subscribe | |
|
|
MARKEM-IMAJE | 9410 |
MARKEM-IMAJE 9410 STAINLESS STEEL CONTINUOUS INKJET CODER - USED MARKEM-IMAJE 9410 CONTINUOUS INKJET CODER WITH: MONO-JET PRINTHEAD G HEAD (PRINTING RESOLUTION: 71 DPI) UP TO 5 LINES OF PRINT PRINT SPEED: UP TO 4.6 M/S ON STAINLESS STEEL CART FONT HEIGHT: 5 TO 32 DOTS CHARACTER HEIGHT: FROM 1.2 TO 11 MM TABLE-TOP OR VERTICAL MOUNTING OPERATING TEMPERATURE RANGE: 0 TO 40...C DEPENDING ON INK USED OVERALL DIMENSIONS: LENGTH: 32 INCHES WIDTH: 17 INCHES HEIGHT: 55 INCHES ELECTRICAL REQUIREMENTS: 100-120 V OR 200-240 V WITH AUTOMATIC SWITCHING 50/60 HZ POWER 60 VA STAINLESS STEEL CABINET AND PRINTHEAD CASE
|
🔒 Subscribe | |
|
|
MARKEM-IMAJE | 9410 |
MARKEM-IMAJE 9410 STAINLESS STEEL CONTINUOUS INKJET CODER WITH: MONO-JET PRINTHEAD G HEAD (PRINTING RESOLUTION: 71 DPI) UP TO 5 LINES OF PRINT PRINT SPEED: UP TO 4.6 M/S ON STAINLESS STEEL CART FONT HEIGHT: 5 TO 32 DOTS CHARACTER HEIGHT: FROM 1.2 TO 11 MM TABLE-TOP OR VERTICAL MOUNTING OPERATING TEMPERATURE RANGE: 0 TO 40...C DEPENDING ON INK USED OVERALL DIMENSIONS: LENGTH: 32 INCHES WIDTH: 17 INCHES HEIGHT: 55 INCHES ELECTRICAL REQUIREMENTS: 100-120 V OR 200-240 V WITH AUTOMATIC SWITCHING 50/60 HZ POWER 60 VA STAINLESS STEEL CABINET AND PRINTHEAD CASE
|
🔒 Subscribe | |
|
|
MARKEM-IMAJE | 9410 |
MARKEM-IMAJE 9410 STAINLESS STEEL CONTINUOUS INKJET CODER - USED MARKEM-IMAJE 9410 CONTINUOUS INKJET CODER WITH: MONO-JET PRINTHEAD G HEAD (PRINTING RESOLUTION: 71 DPI) UP TO 5 LINES OF PRINT PRINT SPEED: UP TO 4.6 M/S ON STAINLESS STEEL CART FONT HEIGHT: 5 TO 32 DOTS CHARACTER HEIGHT: FROM 1.2 TO 11 MM TABLE-TOP OR VERTICAL MOUNTING OPERATING TEMPERATURE RANGE: 0 TO 40...C DEPENDING ON INK USED OVERALL DIMENSIONS: LENGTH: 32 INCHES WIDTH: 17 INCHES HEIGHT: 55 INCHES ELECTRICAL REQUIREMENTS: 100-120 V OR 200-240 V WITH AUTOMATIC SWITCHING 50/60 HZ POWER 60 VA STAINLESS STEEL CABINET AND PRINTHEAD CASE
|
🔒 Subscribe | |
|
|
PACKRITE | BANDRITE 6000 |
PACKRITE BANDRITE 6000 CONTINUOUS BAND SEALER WITH: THROUGHPUT: UP TO 750 INCHES PER MINUTE, DEPENDING ON THE APPLICATION SEAL WIDTH: 0.75 INCHES SEALING CAPACITY: 6 MIL SINGLE-THICKNESS GUSSETED BAGS 12 MIL SINGLE-THICKNESS FLAT BAGS PRODUCT FLOW: RIGHT TO LEFT ADJUSTABLE PRODUCT GUIDE RAILS STAINLESS STEEL CONSTRUCTION STAINLESS STEEL CONSTRUCTION OVERALL DIMENSIONS: LENGTH: 70 INCHES WIDTH: 43 INCHES HEIGHT: 63 INCHES ELECTRICAL REQUIREMENTS: 1 PHASE/ 115 VOLTS/60 HERTZ
|
🔒 Subscribe | |
|
|
PACKRITE | BANDRITE 6000 |
PACKRITE BANDRITE 6000 CONTINUOUS BAND SEALER WITH: THROUGHPUT: UP TO 750 INCHES PER MINUTE, DEPENDING ON THE APPLICATION SEAL WIDTH: 0.75 INCHES SEALING CAPACITY: 6 MIL SINGLE-THICKNESS GUSSETED BAGS 12 MIL SINGLE-THICKNESS FLAT BAGS PRODUCT FLOW: RIGHT TO LEFT ADJUSTABLE PRODUCT GUIDE RAILS STAINLESS STEEL CONSTRUCTION OVERALL DIMENSIONS: LENGTH: 70 INCHES WIDTH: 43 INCHES HEIGHT: 63 INCHES ELECTRICAL REQUIREMENTS: 1 PHASE/ 115 VOLTS/ 60 HERTZ
|
🔒 Subscribe | |
|
|
MARKEM-IMAJE | 9410 |
MARKEM-IMAJE 9410 STAINLESS STEEL CONTINUOUS INKJET PRINTER - USED MARKEM-IMAJE 9410 CONTINUOUS INKJET CODER WITH: MONO-JET PRINTHEAD G HEAD (PRINTING RESOLUTION: 71 DPI) UP TO 5 LINES OF PRINT PRINT SPEED: UP TO 4.6 M/S ON STAINLESS STEEL CART FONT HEIGHT: 5 TO 32 DOTS CHARACTER HEIGHT: FROM 1.2 TO 11 MM TABLE-TOP OR VERTICAL MOUNTING OPERATING TEMPERATURE RANGE: 0 TO 40...C DEPENDING ON INK USED OVERALL DIMENSIONS: LENGTH: 32 INCHES WIDTH: 17 INCHES HEIGHT: 55 INCHES ELECTRICAL REQUIREMENTS: 100-120 V OR 200-240 V WITH AUTOMATIC SWITCHING 50/60 HZ POWER 60 VA STAINLESS STEEL CABINET AND PRINTHEAD CASE
|
🔒 Subscribe | |
|
|
(3) 24" WIDE X 120" LONG CONVEYOR FRAMES - USED CONVEYORS WITH: (3) CONVEYOR DIMENSIONS: LENGTH: 120 INCHES FRAME WIDTH: 24 INCHES OVERALL DIMENSIONS: LENGTH: 128 INCHES WIDTH: 33 INCHES HEIGHT: 33 INCHES
|
🔒 Subscribe | |||
|
|
TEN USED ROLLER CONVEYORS WITH ROLLER LENGTH: 20 INCHES. (4) CONVEYOR DIMENSIONS: LENGTH: 30 INCHES WIDTH: 24 INCHES. (5) CONVEYOR DIMENSIONS: LENGTH: 120 INCHES WIDTH: 24 INCHES. (1) CONVEYOR DIMENSIONS: LENGTH: 88 INCHES WIDTH: 24 INCHES. BAND-DRIVEN ROLLER CONVEYOR FRAMES WITH INTERROLL ZONE CONTROL.
|
🔒 Subscribe | |||
|
|
INTERROLL | ZONE CONTROL |
(7) INTERROLL ZONE CONTROL CONVEYOR FRAMES WITH 20-INCH ROLLERS. FRAME DIMENSIONS: LENGTH: 120 INCHES, WIDTH: 24 INCHES. OVERALL DIMENSIONS: LENGTH: 128 INCHES, WIDTH: 33 INCHES, HEIGHT: 55 INCHES. USED CONVEYOR FRAMES.
|
🔒 Subscribe | |
|
|
HYTROL | 15-DEGREE |
20" X 36" HYTROL CORNER CONVEYOR CONVEYOR - USED HYTROL 15-DEGREE CONVEYOR WITH: CONVEYOR DIMENSIONS: LENGTH: 36 INCHES WIDTH: 20 INCHES OVERALL DIMENSIONS: LENGTH: 48 INCHES WIDTH: 55 INCHES HEIGHT: 36 INCHES
|
🔒 Subscribe | |
|
|
HYTROL | SMOOTH TOP CORNER CONVEYOR |
20" WIDE X 70" LONG HYTROL SMOOTH TOP CORNER CONVEYOR - CONVEYOR DIMENSIONS: LENGTH: 70 INCHES WIDTH: 20 INCHES OVERALL DIMENSIONS: LENGTH: 115 INCHES WIDTH: 58 INCHES HEIGHT: 50 INCHES
|
🔒 Subscribe | |
|
|
HYTROL |
HYTROL SMOOTH TOP CONVEYOR FRAME WITH CONVEYOR PARTS. BELT WIDTH: 24 INCHES. CONVEYOR FRAME DIMENSIONS: LENGTH: 90 INCHES, WIDTH: 31 INCHES.
|
🔒 Subscribe | ||
|
|
HYTROL |
HYTROL CONVEYOR FRAME AND CONVEYOR PARTS CONVEYOR FRAME DIMENSIONS: LENGTH 120 INCHES WIDTH 24 INCHES OVERALL DIMENSIONS: LENGTH: 120 INCHES WIDTH: 30 INCHES
|
🔒 Subscribe | ||
|
|
BASTIAN |
PALLET OF BASTIAN POWER SUPPLY FOR CONVEYORS. OVERALL DIMENSIONS: LENGTH: 40 INCHES WIDTH: 36 INCHES HEIGHT: 30 INCHES
|
🔒 Subscribe | ||
|
|
TOYOTA | 8BWS13 |
USED TOYOTA 8BWS13 ELECTRIC FORKLIFT WITH: MAXIMUM CAPACITY: 2,500 POUNDS MAXIMUM LIFT HEIGHT: 143 INCHES MAXIMUM TRAVEL SPEED WITH FULL LOAD: 3.4 MILES PER HOUR OVERALL DIMENSIONS: LENGTH: 35.6 INCHES WIDTH: 59 INCHES HEIGHT: 91 INCHES ELECTRICAL REQUIREMENTS: 24 VOLTS, 6-HOUR RATE
|
🔒 Subscribe | |
|
|
FLOW TURN | B-SP-SQ-38_21-180-57 |
21" WIDE X 160" LONG FLOW TURN INCLINE CONVEYOR - USED FLOW TURN INCLINE CONVEYOR WITH: MODEL: B-SP-SQ-38_21-180-57 CONVEYOR DIMENSIONS: LENGTH: 160 INCHES WIDTH: 21 INCHES OVERALL DIMENSIONS: LENGTH: 150 INCHES WIDTH: 64 INCHES HEIGHT: 50 INCHES NO MOTOR INCLUDED
|
🔒 Subscribe | |
|
|
FLOW TURN | B-SP-SQ-38_21-180-57 |
21" WIDE X 160" LONG FLOW TURN INCLINE CONVEYOR - USED FLOW TURN INCLINE CONVEYOR WITH: CONVEYOR DIMENSIONS: LENGTH: 160 INCHES WIDTH: 21 INCHES OVERALL DIMENSIONS: LENGTH: 150 INCHES WIDTH: 64 INCHES HEIGHT: 50 INCHES NO MOTOR INCLUDED
|
🔒 Subscribe | |
|
|
2000 |
20" WIDE X 120" LONG SMOOTH BELT CONVEYOR BELT - USED SMOOTH BELT CONVEYOR WITH: (2) CONVEYOR FRAME DIMENSIONS: LENGTH: 120 INCHES WIDTH: 24 INCHES BELT WIDTH: 20 INCHES
|
🔒 Subscribe | ||
|
|
(3) ROLLER CONVEYOR FRAMES - USED ROLLER CONVEYOR WITH: THREE PIECES NO LEGS ROLLER DIMENSIONS: LENGTH: 49 INCHES DIAMETER: 1.75 INCHES FIRST CONVEYOR DIMENSIONS: LENGTH: 120 INCHES WIDTH: 55 INCHES SECOND CONVEYOR DIMENSIONS: LENGTH: 184 INCHES WIDTH: 55 INCHES THIRD CONVEYOR DIMENSIONS: LENGTH: 190 INCHES WIDTH: 55 INCHES
|
🔒 Subscribe | |||
|
|
HYTROL |
[CONVEYOR FRAMES] WITH: (3) CONVEYOR FRAME DIMENSIONS: LENGTH: 120 INCHES WIDTH: 24 INCHES OVERALL DIMENSIONS: LENGTH: 124 WIDTH: 28 INCHES
|
🔒 Subscribe | ||
|
|
PALLET OF CONTROL PANELS - OVERALL DIMENSIONS: LENGTH: 48 INCHES WIDTH: 41 INCHES HEIGHT: 24 INCHES
|
🔒 Subscribe | |||
|
|
HYTROL | CONVEYOR FRAME |
[120 INCHES LENGTH, 30 INCHES WIDTH] HYTROL CONVEYOR FRAME WITH (3) CONVEYOR PARTS. OVERALL DIMENSIONS: LENGTH: 128 INCHES WIDTH: 40 INCHES. EQUIPMENT WILL BE LOADED AS IS.
|
🔒 Subscribe | |
|
|
HYTROL | CONVEYOR FRAMES |
TWO HYTROL CONVEYOR FRAMES - HYTROL CONVEYOR FRAMES WITH: DIMENSIONS OF FIRST CONVEYOR FRAME: LENGTH: 67 INCHES WIDTH: 24 INCHES DIMENSIONS OF SECOND CONVEYOR FRAME: LENGTH: 96 INCHES WIDTH: 24 INCHES OVERALL DIMENSIONS: LENGTH: 107 INCHES WIDTH: 32 INCHES HEIGHT: 40 INCHES EQUIPMENT WILL BE LOADED AS IS.
|
🔒 Subscribe | |
|
|
(3) BAND DRIVEN CONVEYORS WITH INTERROLL ZONE CONTROL - (1) SMOOTH TOP CONVEYOR DIMENSIONS: LENGTH: 30 INCHES WIDTH: 20 INCHES (1) ROLLER CONVEYOR DIMENSIONS: LENGTH: 60 INCHES WIDTH: 20 INCHES (1) ROLLER CONVEYOR DIMENSIONS: LENGTH: 114 INCHES WIDTH: 20 INCHES ROLLER/ BELT SIZE: 20 INCHES
|
🔒 Subscribe | |||
|
|
HYTROL |
[100 INCHES LENGTH X 30 INCHES WIDTH] CONVEYOR FRAME WITH CONVEYOR PARTS, [124 INCHES LENGTH X 30 INCHES WIDTH] CONVEYOR FRAME WITH CONVEYOR PARTS. OVERALL DIMENSIONS: LENGTH: 130 INCHES WIDTH: 40 INCHES HEIGHT: 45 INCHES
|
🔒 Subscribe | ||
|
|
MARKEM-IMAJE | 9410 |
MARKEM-IMAJE 9410 STAINLESS STEEL CONTINUOUS INK JET CODER - USED MARKEM-IMAJE 9410 CONTINUOUS INKJET CODER WITH: MONO-JET PRINTHEAD G HEAD (PRINTING RESOLUTION: 71 DPI) UP TO 5 LINES OF PRINT PRINT SPEED: UP TO 4.6 M/S ON STAINLESS STEEL CART FONT HEIGHT: 5 TO 32 DOTS CHARACTER HEIGHT: FROM 1.2 TO 11 MM TABLE-TOP OR VERTICAL MOUNTING OPERATING TEMPERATURE RANGE: 0 TO 40...C DEPENDING ON INK USED OVERALL DIMENSIONS: LENGTH: 32 INCHES WIDTH: 17 INCHES HEIGHT: 55 INCHES ELECTRICAL REQUIREMENTS: 100-120 V OR 200-240 V WITH AUTOMATIC SWITCHING 50/60 HZ POWER 60 VA STAINLESS STEEL CABINET AND PRINTHEAD CASE
|
🔒 Subscribe | |
|
|
HYTROL | 45 DEGREE ROLLER CONVEYOR FRAME |
48" WIDE X 128" LONG HYTROL 45 DEGREE ROLLER CONVEYOR FRAME - USED HYTROL 45 DEGREE ROLLER CONVEYOR WITH: MOTORS, GEAR BOXES, AND SENSORS HAVE BEEN REMOVED FROM THIS EQUIPMENT. ROLLER LENGTH: 48 INCHES OVERALL DIMENSIONS: LENGTH: 128 INCHES WIDTH: 70 INCHES HEIGHT: 43 INCHES
|
🔒 Subscribe | |
|
|
ELEVEN USED ROLLER CONVEYORS WITH INTERROLL ZONE CONTROL WITH: ROLLER/ BELT DIMENSIONS: 20 INCHES (3) ROLLER CONVEYOR DIMENSIONS: LENGTH: 8 INCHES WIDTH: 24 INCHES (3) ROLLER CONVEYOR DIMENSIONS: LENGTH: 10 INCHES WIDTH: 24 INCHES (2) ROLLER CONVEYOR DIMENSIONS: LENGTH: 16 INCHES WIDTH: 24 INCHES (1) ROLLER CONVEYOR DIMENSIONS: LENGTH: 60 INCHES WIDTH: 24 INCHES (1) ROLLER CONVEYOR DIMENSIONS: LENGTH: 66 INCHES WIDTH: 24 INCHES (1) ROLLER CONVEYOR DIMENSIONS: LENGTH: 90 INCHES WIDTH: 24 INCHES
|
🔒 Subscribe | |||
|
|
SOUTHWORTH | LS4-36 |
USED SOUTHWORTH LS4-36 LIFT TABLE: CAPACITY: 3500 POUNDS TURN TABLE DIAMETER: 43 INCHES OVERALL DIMENSIONS: LENGTH: 48 INCHES WIDTH: 48 INCHES HEIGHT: 37 INCHES
|
🔒 Subscribe | |
|
|
HYTROL |
(3) HYTROL CONVEYOR FRAMES AND CONVEYOR PARTS - (1) CONVEYOR FRAME: LENGTH: 96 INCHES WIDTH: 24 INCHES (1) CONVEYOR FRAME: LENGTH : 92 INCHES WIDTH 24 INCHES (1) CONVEYOR FRAME: LENGTH 120 INCHES WIDTH 24 INCHES OVERALL DIMENSIONS: LENGTH: 120 INCHES WIDTH: 24 INCHES
|
🔒 Subscribe | ||
|
|
HYTROL |
(4) HYTROL CONVEYOR FRAMES AND CONVEYOR PARTS - USED CONVEYOR PARTS WITH: FOUR CONVEYORS (1) CONVEYOR DIMENSIONS: LENGTH: 105 INCHES FRAME WIDTH: 30 INCHES (3) CONVEYOR DIMENSIONS: LENGTH: 120 INCHES FRAME WIDTH: 30 INCHES
|
🔒 Subscribe | ||
|
|
HYTROL | CORNER CONVEYOR |
20" WIDE X 36" LONG HYTROL CORNER CONVEYOR. CONVEYOR WIDTH: 20 INCHES. OVERALL DIMENSIONS: LENGTH: 48 INCHES, WIDTH: 41 INCHES, HEIGHT: 13 INCHES. EQUIPMENT WILL BE LOADED AS IS.
|
🔒 Subscribe |
LANTECH C-1000
LANTECH C-1000 TAPE BOTTOM SEAL RIGHT HAND CASE ERECTOR - USED LANTECH C-1000 CASE ERECTOR WITH: AUT...
FELDMEIER 1000 GALLON JACKETED STAINLESS STEEL MIXING TANK
1000 GALLON FELDMEIER JACKETED STAINLESS STEEL MIXING TANK - USED FELDMEIER JACKETED STAINLESS STEEL...
FELDMEIER
FELDMEIER 650 GALLON JACKETED STAINLESS STEEL MIXING TANK - USED JACKETED STAINLESS STEEL MIXING TAN...
FELDMEIER MIXING TANK
500 GALLON FELDMEIER STAINLESS STEEL MIXING TANK - USED FELDMEIER STAINLESS STEEL MIXING TANK WITH: ...
BASTIAN SOLUTIONS CONTROL PANEL
BASTIAN SOLUTIONS CONTROL PANEL WITH ALLEN BRADLEY POWER FLEX 525. OVERALL DIMENSIONS: LENGTH: 132 I...
MERITECH XBW
MERITECH XBW SOLES-ONLY FOOTWARE SANITIZER MACHINE WITH: SUPPORTING UP TO 12-15 USERS PER MINUTE BID...
UNIVERSAL TA4
UNIVERSAL TA4 WRAPAROUND PRESSURE SENSITIVE LABELER CONTOURED PRODUCT CAPABLE - USED UNIVERSAL TA4 W...
RYSON 1600-500-A1-3
RYSON SPIRAL INCLINE CONVEYOR - USED RYSON SPIRAL CONVEYOR WITH: CONVEYOR WIDTH: 19.5 INCHES MODEL: ...
MERITECH XBW
MERITECH XBW SOLES-ONLY FOOTWARE SANITIZER MACHINE WITH: SUPPORTING UP TO 12-15 USERS PER MINUTE BID...
12.5" WIDE X 195" LONG CLEATED BLUE BELT INCLINE CONVEYOR - USED BLUE BELT INCLINE CONVEYOR WITH: CL
RYSON 1600-500-B1-2.25
RYSON SPIRAL INCLINE CONVEYOR - USED RYSON SPIRAL CONVEYOR WITH: MODEL: 1600-500-B1-2.25 BELT WIDTH:...
20" W X 120" L CONVEYOR FRAME W SMOOTH TOP BELTING AND INTERROLL ZONE CONTROL. ROLLER WIDTH: 20 INCH
RYSON 1600-500-B1-2.25
RYSON SPIRAL INCLINE CONVEYOR - USED RYSON SPIRAL CONVEYOR WITH: MODEL: 1600-500-B1-2.25 BELT WIDTH:...
RYSON SPIRAL INCLINE CONVEYOR
[RYSON SPIRAL INCLINE CONVEYOR] USED RYSON SPIRAL CONVEYOR WITH: CONVEYOR WIDTH: 20 INCHES INFEED HE...
RYSON SPIRAL DECLINE CONVEYOR
RYSON SPIRAL DECLINE CONVEYOR - USED RYSON SPIRAL CONVEYOR WITH: BELT WIDTH: 19.5 INCHES OVERALL DIM...
MARKEM-IMAJE 9410
MARKEM-IMAJE 9410 STAINLESS STEEL CONTINUOUS INKJET PRINTER - USED MARKEM-IMAJE 9410 CONTINUOUS INKJ...
RYSON 1600-500-B1-2.25
RYSON SPIRAL INCLINE CONVEYOR - USED RYSON SPIRAL CONVEYOR WITH: MODEL: 1600-500-B1-2.25 BELT WIDTH:...
RYSON 1600-500-B1-2.25
RYSON SPIRAL INCLINE CONVEYOR - USED RYSON SPIRAL CONVEYOR WITH: MODEL: 1600-500-B1-2.25 INFEED HEIG...
MARKEM-IMAJE 9410
MARKEM-IMAJE 9410 STAINLESS STEEL CONTINUOUS INKJET CODER - USED MARKEM-IMAJE 9410 CONTINUOUS INKJET...
MARKEM-IMAJE 9410
MARKEM-IMAJE 9410 STAINLESS STEEL CONTINUOUS INKJET CODER WITH: MONO-JET PRINTHEAD G HEAD (PRINTING ...
MARKEM-IMAJE 9410
MARKEM-IMAJE 9410 STAINLESS STEEL CONTINUOUS INKJET CODER - USED MARKEM-IMAJE 9410 CONTINUOUS INKJET...
PACKRITE BANDRITE 6000
PACKRITE BANDRITE 6000 CONTINUOUS BAND SEALER WITH: THROUGHPUT: UP TO 750 INCHES PER MINUTE, DEPENDI...
PACKRITE BANDRITE 6000
PACKRITE BANDRITE 6000 CONTINUOUS BAND SEALER WITH: THROUGHPUT: UP TO 750 INCHES PER MINUTE, DEPENDI...
MARKEM-IMAJE 9410
MARKEM-IMAJE 9410 STAINLESS STEEL CONTINUOUS INKJET PRINTER - USED MARKEM-IMAJE 9410 CONTINUOUS INKJ...
(3) 24" WIDE X 120" LONG CONVEYOR FRAMES - USED CONVEYORS WITH: (3) CONVEYOR DIMENSIONS: LENGTH: 120
TEN USED ROLLER CONVEYORS WITH ROLLER LENGTH: 20 INCHES. (4) CONVEYOR DIMENSIONS: LENGTH: 30 INCHES
INTERROLL ZONE CONTROL
(7) INTERROLL ZONE CONTROL CONVEYOR FRAMES WITH 20-INCH ROLLERS. FRAME DIMENSIONS: LENGTH: 120 INCHE...
HYTROL 15-DEGREE
20" X 36" HYTROL CORNER CONVEYOR CONVEYOR - USED HYTROL 15-DEGREE CONVEYOR WITH: CONVEYOR DIMENSIONS...
HYTROL SMOOTH TOP CORNER CONVEYOR
20" WIDE X 70" LONG HYTROL SMOOTH TOP CORNER CONVEYOR - CONVEYOR DIMENSIONS: LENGTH: 70 INCHES WIDTH...
HYTROL
HYTROL SMOOTH TOP CONVEYOR FRAME WITH CONVEYOR PARTS. BELT WIDTH: 24 INCHES. CONVEYOR FRAME DIMENSIO...
HYTROL
HYTROL CONVEYOR FRAME AND CONVEYOR PARTS CONVEYOR FRAME DIMENSIONS: LENGTH 120 INCHES WIDTH 24 INCHE...
BASTIAN
PALLET OF BASTIAN POWER SUPPLY FOR CONVEYORS. OVERALL DIMENSIONS: LENGTH: 40 INCHES WIDTH: 36 INCHES...
TOYOTA 8BWS13
USED TOYOTA 8BWS13 ELECTRIC FORKLIFT WITH: MAXIMUM CAPACITY: 2,500 POUNDS MAXIMUM LIFT HEIGHT: 143 I...
FLOW TURN B-SP-SQ-38_21-180-57
21" WIDE X 160" LONG FLOW TURN INCLINE CONVEYOR - USED FLOW TURN INCLINE CONVEYOR WITH: MODEL: B-SP-...
FLOW TURN B-SP-SQ-38_21-180-57
21" WIDE X 160" LONG FLOW TURN INCLINE CONVEYOR - USED FLOW TURN INCLINE CONVEYOR WITH: CONVEYOR DIM...
2000
20" WIDE X 120" LONG SMOOTH BELT CONVEYOR BELT - USED SMOOTH BELT CONVEYOR WITH: (2) CONVEYOR FRAME ...
(3) ROLLER CONVEYOR FRAMES - USED ROLLER CONVEYOR WITH: THREE PIECES NO LEGS ROLLER DIMENSIONS: LENG
HYTROL
[CONVEYOR FRAMES] WITH: (3) CONVEYOR FRAME DIMENSIONS: LENGTH: 120 INCHES WIDTH: 24 INCHES OVERALL D...
PALLET OF CONTROL PANELS - OVERALL DIMENSIONS: LENGTH: 48 INCHES WIDTH: 41 INCHES HEIGHT: 24 INCHES
HYTROL CONVEYOR FRAME
[120 INCHES LENGTH, 30 INCHES WIDTH] HYTROL CONVEYOR FRAME WITH (3) CONVEYOR PARTS. OVERALL DIMENSIO...
HYTROL CONVEYOR FRAMES
TWO HYTROL CONVEYOR FRAMES - HYTROL CONVEYOR FRAMES WITH: DIMENSIONS OF FIRST CONVEYOR FRAME: LENGTH...
(3) BAND DRIVEN CONVEYORS WITH INTERROLL ZONE CONTROL - (1) SMOOTH TOP CONVEYOR DIMENSIONS: LENGTH:
HYTROL
[100 INCHES LENGTH X 30 INCHES WIDTH] CONVEYOR FRAME WITH CONVEYOR PARTS, [124 INCHES LENGTH X 30 IN...
MARKEM-IMAJE 9410
MARKEM-IMAJE 9410 STAINLESS STEEL CONTINUOUS INK JET CODER - USED MARKEM-IMAJE 9410 CONTINUOUS INKJE...
HYTROL 45 DEGREE ROLLER CONVEYOR FRAME
48" WIDE X 128" LONG HYTROL 45 DEGREE ROLLER CONVEYOR FRAME - USED HYTROL 45 DEGREE ROLLER CONVEYOR ...
ELEVEN USED ROLLER CONVEYORS WITH INTERROLL ZONE CONTROL WITH: ROLLER/ BELT DIMENSIONS: 20 INCHES (3
SOUTHWORTH LS4-36
USED SOUTHWORTH LS4-36 LIFT TABLE: CAPACITY: 3500 POUNDS TURN TABLE DIAMETER: 43 INCHES OVERALL DIME...
HYTROL
(3) HYTROL CONVEYOR FRAMES AND CONVEYOR PARTS - (1) CONVEYOR FRAME: LENGTH: 96 INCHES WIDTH: 24 INCH...
HYTROL
(4) HYTROL CONVEYOR FRAMES AND CONVEYOR PARTS - USED CONVEYOR PARTS WITH: FOUR CONVEYORS (1) CONVEYO...
HYTROL CORNER CONVEYOR
20" WIDE X 36" LONG HYTROL CORNER CONVEYOR. CONVEYOR WIDTH: 20 INCHES. OVERALL DIMENSIONS: LENGTH: 4...