Food Beverage and Nutraceutical Processing and Packaging Equipment Auction

INV PACK FULL LINE 6 LANE LIQUID STICKPACK MACHINE WITH CARTONER & ROBOTIC CASE ERECTOR, PACKER, & PALLETIZER - LIQUID STICKPACK SYSTEM WITH: PRESSURIZED AISI-316L STAINLESS STEEL 25 LITER HOPPER: HYGIENIC CLAMP CONNECTION FOR INSTALLATION OF THE LEVEL SENSORS FULL CIP SYSTEM (5) CLAMPS FOR TANK COVER TANK PRESSURE: BETWEEN 3 AND 6 BAR RELIEF VALVE PRESSURE GAUGE PRESSURE REGULATOR VIBRATION LEVEL SENSOR AISI-316L STAINLESS STEEL CONSTRUCTION. PRODUCTION OUTPUT RATE: UP TO 50 STICKPACKS/LANE PER MINUTE (DEPENDING ON APPLICATION) UP TO 300 STICKPACKS PER MINUTE (DEPENDING ON APPLICATION). CURRENT STICKPACK SPECIFICATIONS: LIQUID (5.7 ML) BAG SIZE: LENGTH: 75 MM WIDTH: 50 MM HIGH-PRECISION FORMING SHOULDERS FOR 3-SIDED SEAL HORIZONTAL TEAR NOTCH AND SIDE HORIZONTAL DIAMOND-TIPPED SEALERS HORIZONTAL STRAIGHT CUT STATION PHOTOCELL FOR VERTICAL FILM CENTERING REEL SPLICER TABLE ULTRASONIC SPLICED REEL DETECTION SYSTEM REEL AUTOMATIC ALIGNMENT SYSTEM END OF REEL ALERT CENTRALIZED SIDE SEAL TRIMMER SCRAP FOIL ASPIRATOR MASCA K1030-HDP LASER CODER NITROGEN GAS DETECTION SYSTEM AIR PRESSURE INSTALLATION: WORKING PRESSURE: 6 BAR MAXIMUM PRESSURE: 7 BAR CONSUMPTION: 1000 L/M 316 STAINLESS STEEL CONTACT PARTS ELECTRICAL: 480 VOLTS, 60 HERTZ, 3 PHASE. MPAC LANGEN AUTOMATIC GLUE HORIZONTAL CARTONER: CARTON SPEED: UP TO 10 CARTONS PER MINUTE (DEPENDING ON APPLICATION). CURRENT CARTON DIMENSIONS: LENGTH: 150 MM HEIGHT: 55 MM DEPTH: 75 MM PRODUCT SHAPE: RECTANGULAR OPERATING TEMPERATURE: >5C (41F) AND <40C (104F). AIR CONSUMPTION: 398 NLTR/MIN OPERATING PRESSURE OF COMPRESSED AIR: 6 BAR (87 PSI). ELECTRICAL: 480 VOLTS, 60 HERTZ, 3 PHASE. MAXIMUM MEASURED SOUND LEVEL: < 80 DECIBELS. LRC-700 ROBOTIC PALLETIZING AND CASE PACKING SYSTEM: CARTONS RECEIVED UPSTREAM AT MAXIMUM RATE OF 17 CARTONS PER MINUTE. FANUC M-710/50H ROBOTIC ARM: MAXIMUM PAYLOAD: 50KG R-30IB CONTROLLER WITH HANDLINGTOOL SOFTWARE VACUUM SUCTION OPERATION MAXIMUM REACH: 2050 MM 5-AXES MOTION MOTION RANGE: 225 TO 720 DEGREES FLOOR MOUNTED ROBOT END-OF-ARM TOOL TO PICK BOTH CARTON AND CASES. ROBOT WORK CELL ENCLOSURE: WIRE MESH FENCE SAFETY INTERLOCKED ACCESS DOORS GUARDING TO COMPLY WITH CATEGORY 3 SAFETY REQUIREMENTS.

EMAX SILENT MODE INDUSTRIAL AIR COMPRESSOR, 80 GALLON, 10 HORSEPOWER. SILENT COMPRESSOR FOR LOW SOUND AS INDUSTRIAL AIR COMPRESSOR!

ROBOT COUPE BLIXER 45 VERTICAL BOWL CHOPPER, VERSATILE KITCHEN APPLIANCE DESIGNED FOR HIGH-EFFICIENCY FOOD PROCESSING. IDEAL FOR PUREEING, CHOPPING, AND MIXING, IT FEATURES A POWERFUL MOTOR AND A ROBUST STAINLESS STEEL BOWL FOR DURABLE, LONG-LASTING PERFORMANCE. ITS VERTICAL DESIGN AND S-SHAPED BLADE ENSURE CONSISTENT, FINE RESULTS, WHETHER YOU'RE WORKING WITH VEGETABLES, MEATS, OR DELICATE INGREDIENTS. PERFECT FOR HIGH-VOLUME KITCHENS, THE BLIXER 45 OFFERS PRECISION AND SPEED, MAKING FOOD PREP QUICKER AND EASIER. PRODUCT LAST RAN: FRUIT AND NUT BLEND STAINLESS STEEL CONSTRUCTION TWO SPEEDS: 1,800 ROTATIONS PER MINUTE 3,600 ROTATIONS PER MINUTE 13.5 HORSEPOWER MOTOR SEE THOUGH LID S BLADE ASSEMBLY 15 MINUTE TIMER ELECTRICAL: 208-240 VAC / 60 HERTZ / 3 PHASE

EPAK MACHINERY 6 HEAD INLINE LIQUID GRAVITY FILLER WITH HOLDING TANK, 6 INLINE PNEUMATIC ACTUATED FILLING HEADS, 7/16 INCH DIAMETER FILL NOZZLES, 1 INCH LONG FILL NOZZLES, MANUAL CLEAN IN PLACE SYSTEM, (2) 3/4 INCH DIAMETER STAINLESS STEEL PRODUCT SUPPLY CONTROL VALVES WITH LEVEL SENSOR, IN TANK FLOAT SYSTEM, ALLEN BRADLEY/MICROLOGIX 1200 CONTROLS, AUTOMATIC DRIP TRAY, AUTOMATIC PIN STYLE INDEXING SYSTEM, PHOTO SENSOR FOR COUNTING SYSTEM, ANTI BACK UP SENSOR SHUT DOWN, 304 STAINLESS STEEL FRAME, AIR REQUIREMENTS: 80-100 PSI COMPRESSED DRY AIR, ELECTRICAL REQUIREMENTS: 115 VOLTS / 1 PHASE / 50-60 HERTZ, PRODUCT LAST RAN: BUBBLES

FAIRBANKS MODEL PLF-HR3400-B1 1000 LB FLOOR SCALE WITH GSE 665 DIGITAL CONTROL, CAPACITY: 1000 LBS, SCALE DIMENSIONS: LENGTH: 36 INCHES WIDTH: 36 INCHES, STEEL LOADING RAMP, ALLOY STEEL CONSTRUCTION, ELECTRICAL REQUIREMENTS: 90-250 VOLTS, 50/60 HERTZ, 1 PHASE

KAPS-ALL AU-5C STAINLESS STEEL PET BOTTLE ORIENTATOR, SPEED: UP TO 300 BOTTLES PER MINUTE (DEPENDING ON PRODUCT SPECIFICATIONS), HOPPER: DIAMETER: 48 INCHES DEPTH: 11.25 INCHES, BOTTLE SIZE CAPACITY: MINIMUM: 1/16 OZ MAXIMUM: 1 GALLON, HEIGHT: ADJUSTABLE, ORIENTATOR GRIPPER BELT: HEIGHT: 6 INCHES WIDTH: 1.5 INCHES, DISCHARGE GRIPPER BELT: LENGTH: 28 INCHES WIDTH: 1 INCH, ANALOG NOZZLE CONTROLS, ELECTRICAL: 110 VOLTS, SINGLE PHASE

ZED INDUSTRIES 15 T BLISTER PACK SEALER, SPEED: UP TO 6 CYCLES PER MINUTE, DEPENDING ON APPLICATION, SEALING AREA: LENGTH: 14 INCHES WIDTH: 15 INCHES, MAXIMUM BLISTER DEPTH: 4 INCHES, INFEED DIMENSIONS: LENGTH: 30 INCHES WIDTH: 20 INCHES, PRECISION TIMER AND TEMPERATURE, PAINTED STEEL CONSTRUCTION, ELECTRICAL REQUIREMENTS: 115 VOLTS, 60 HERTZ, 1 PHASE, OVERALL DIMENSIONS: LENGTH: 78 INCHES WIDTH: 27 INCHES HEIGHT: 60 INCHES

ZED INDUSTRIES 15 T BLISTER PACK SEALER, SPEED: UP TO 6 CYCLES PER MINUTE, DEPENDING ON APPLICATION, SEALING AREA: LENGTH: 14 INCHES WIDTH: 15 INCHES, MAXIMUM BLISTER DEPTH: 4 INCHES, INFEED DIMENSIONS: LENGTH: 30 INCHES WIDTH: 20 INCHES, PRECISION TIMER AND TEMPERATURE, PAINTED STEEL CONSTRUCTION, ELECTRICAL REQUIREMENTS: 115 VOLTS, 60 HERTZ, 1 PHASE, OVERALL DIMENSIONS: LENGTH: 78 INCHES WIDTH: 27 INCHES HEIGHT: 60 INCHES

42 INCH DIAMETER STAINLESS STEEL DISC UNSCRAMBLING TABLE, 42 INCH DIAMETER, 71 INCH LONG X 48 INCH WIDE SQUARE SECTION AREA, 42 INCH DISCHARGE HEIGHT FROM GROUND, 2 INCH TALL GUIDERAILS, CASTERS, VARIABLE SPEED CONTROLLER, 220 VOLTS

42 INCH DIAMETER STAINLESS STEEL DISC UNSCRAMBLING TABLE, 42 INCH DISCHARGE HEIGHT, 2 INCH TALL GUIDERAILS, CASTERS, 220 VOLTS

SF-600 PEDAL OPERATED IMPULSE HEAT SEALER, USED IMPULSE BAG SEALER WITH: SEAL SIZE: LENGTH: 24 INCHES WIDTH: 0.125 INCHES THICKNESS: 0.01 INCHES SEAL TIMER SETTINGS FOOT PEDAL OPERATED APPROXIMATE OVERALL DIMENSIONS: WIDTH: 28.75 INCHES DEPTH: 21.625 INCHES HEIGHT: 32.25 INCHES MOTOR: 1 HORSEPOWER ELECTRICAL: 60 HZ, 110 VOLTS MACHINE WEIGHT: APPROXIMATELY 26 POUNDS

42 INCH DIAMETER STAINLESS STEEL DISC UNSCRAMBLING TABLE, 42 INCH DIAMETER, 71 INCH LONG X 48 INCH WIDE SQUARE SECTION AREA, 42 INCH DISCHARGE HEIGHT FROM GROUND, 2 INCH TALL GUIDERAILS, CASTERS, VARIABLE SPEED CONTROLLER, 220 VOLTS

STAINLESS STEEL ELEVATING CONVEYOR WITH WATERFALL DISCHARGE AND HOPPER, HOPPER DIMENSIONS: LENGTH: 32 INCHES WIDTH: 24.5 INCHES DEPTH: 23 INCHES OVERALL DIMENSIONS: LENGTH: 39 WIDTH: 48 HEIGHT: 97 EFFECTIVE BELT WIDTH: 11 INCHES BELT TYPE: PLASTIC TABLE TOP CLEAT DIMENSIONS: WIDTH: 10.5 INCHES HEIGHT: 0.25 INCHES FLIGHT: 7.5 INCHES DISCHARGE HEIGHT: 71 INCHES ADJUSTABLE CONVEYOR SPEED MOUNTED ON SCREW-LEVELING FEET ELECTRICAL: 220/380 V, 50/60 HZ, THREE PHASE

INDUCTION SEALER WITH: FLAT SEALING HEAD: LENGTH: 26 INCHES WIDTH: 5 INCHES HAND CRANK HEIGHT ADJUSTMENT PUSH BUTTON CONTROLS DIGITAL READOUT AIR COOLED ELECTRICAL REQUIREMENTS: 208/240 VOLTS, 60 HERTZ, 1 PHASE MOUNTED ON CASTERS S/N:

DIXIE CANNING SEMI AUTOMATIC UVD AL SEAMER, DOUBLE SEAM CAN RANGE: 2 INCHES TO 6.25 INCH DIAMETER, MAXIMUM HEIGHT: UP TO 7 INCHES TALL, OUTPUT: 10 CANS PER MINUTE - ATMOSPHERIC, 6 CANS PER MINUTE - VACUUM, 4 CANS PER MINUTE - VACUUM AND GAS, PLATFORM PIVOTING DOOR, BALDOR MOTOR HP: .75, RPM: 3450, 38 INCH WORKING PLATFORM HEIGHT, VACUUM PUMP, AIR REGULATOR ASSEMBLY, E-STOP

PALE MATE 75604 13 INCH DIAMETER LID TAMPER FOR BUCKETS, PUSH ARM DIAMETER: 13 INCHES, CONVEYOR DIMENSIONS (INCHES): LENGTH: 36 WIDTH: 12 HEIGHT: 29, OVERALL DIMENSIONS (INCHES): LENGTH: 27 WIDTH: 37 HEIGHT: 68, PUSH BUTTON CONTROL, MOUNTED ON CASTERS FOR MOBILITY, MANUALLY ADJUSTABLE HEIGHT, PNEUMATIC ACTION, AIR REQUIREMENTS: 145 PSI MAXIMUM

PALE MATE 74828 13 INCH DIAMETER LID TAMPER FOR BUCKETS, PUSH ARM DIAMETER: 13 INCHES, CONVEYOR DIMENSIONS (INCHES): LENGTH: 36 WIDTH: 12 HEIGHT: 29, OVERALL DIMENSIONS (INCHES): LENGTH: 27 WIDTH: 37 HEIGHT: 68, PUSH BUTTON CONTROL, MOUNTED ON CASTERS FOR MOBILITY, MANUALLY ADJUSTABLE HEIGHT, PNEUMATIC ACTION, AIR REQUIREMENTS: 145 PSI MAXIMUM

PACK AIR AL-18195 PLASTIC TABLE-TOP MASS FLOW ACCUMULATION CONVEYOR W/ 1 HP MOTOR. TABLE DIMENSIONS: LENGTH: 80 INCHES WIDTH: (7) 3.5 INCH TOTAL WIDTH: 24.5 INCHES. INFEED DIEMENSIONS: WIDTH: 23 HEIGHT: 43.5 DISCHARGE HEIGHT: 39.5 INCHES. GUIDE RAIL HEIGHT: 3 INCHES. BELT TYPE: PLASTIC MAT-TOP. MOUNTED ON (4) LEGS. MOTOR: HORSEPOWER: 1 RPM: 1760. ELECTRICAL: 3 PHASE, 60 HERTZ, 208-230/460 VOLTS.

HERCULES HI-112-SP STAINLESS STEEL HYDRAULIC BARREL DUMPER, CAPACITY: 750 POUNDS, DIAMETER: 24 INCHES, HYDRAULIC LIFT MECHANISM, MAXIMUM HORIZONTAL HEIGHT: 55 INCHES, POUR HEIGHT FROM FLOOR: 42 INCHES, STAINLESS STEEL FRAME, (4) CASTER WHEELS, ELECTRICAL REQUIREMENTS: VOLTS: 203-230/460

G-FORCE Q LIFTING DEVICE, CAPACITY: 165 POUNDS, SPEED: UP TO 200 FEET PER MINUTE, MAXIMUM LIFT RANGE: 11 FEET, ELECTRICAL REQUIREMENTS: 220 VOLTS/ 50-60 HERTZ/ 1 PHASE

CRETORS FTHC-C15104-1 STAINLESS STEEL BLUE BELT INCLINE CONVEYOR 14 INCH W. INCLINE LENGTH: 264 INCHES, STRAIGHT LENGTH: 48 INCHES, CONVEYOR WIDTH: 14 INCHES, INFEED HEIGHT: 21 INCHES, DISCHARGE HEIGHT: 48 INCHES, DISCHARGE PAN: 40 INCHES, RETRACTABLE DISCHARGE PAN: 6 INCHES, INFEED HOPPER DIMENSIONS: WIDTH: 28 INCHES, DEPTH: 14 INCHES, SANITARY BLUE BELT, MOTOR: 0.75 HP, ELECTRICALS: 460 VOLTS, 3 PHASE, 60 HERTZ, 1.6 AMPS, MOUNTED ON CASTERS, STAINLESS STEEL CONSTRUCTION.

CONVEYOR SOLUTIONS 55 GALLON DRUM DUMPER, AIR ACTUATED, CAPACITY: 500 POUNDS, OVERALL DIMENSIONS (INCHES): LENGTH: 60 WIDTH: 44 HEIGHT: 50, STAINLESS STEEL CONSTRUCTION, MOUNTED ON A FRAME, AIR REQUIREMENTS: 100 PSI, LAST APPLICATION: 55 GALLON DRUMS OF PEPPERS

CONVEYOR SOLUTIONS 500 GALLON AIR 55 GALLON DRUM DUMPER - USED DRUM DUMPER WITH: STYLE: AIR ACTUATED STANDARD 55 GALLON DRUMS CAPACITY: 500 POUNDS DISCHARGE DIMENSIONS (INCHES): LENGTH: 18 WIDTH: 20 HEIGHT: 16 OVERALL DIMENSIONS (INCHES): LENGTH: 60 WIDTH: 44 HEIGHT: 50 STAINLESS STEEL CONSTRUCTION MOUNTED ON A FRAME AIR REQUIREMENTS: 100 PSI LAST APPLICATION: 55 GALLON DRUMS OF VEGETABLES

LEWCO LOW PROFILE SLIDER BED BELT CONVEYOR 12'L X 32"W, VARIABLE SPEED DRIVE, PHOTO EYE SENSOR, OVERALL DIMENSIONS: LENGTH: 12 FEET, WIDTH: 32 INCHES, ADJUSTABLE HEIGHT: UP TO 60 INCHES, PAINTED STEEL CONSTRUCTION

BARREL DRUM LIFT AND DUMPER, USED DRUM DUMPER WITH APPLICATION: USED TO LIFT AND DUMP BARREL DRUMS OVERALL LENGTH: 5 FEET 4 INCHES OVERALL WIDTH: 5 FEET 9 INCHES OVERALL HEIGHT: 13 FEET 2 INCHES HYDRAULIC PACK NOT INCLUDED

20KW PILLAR MK-20 INDUCTION HEATER, POWER RANGE: 2.5 KW - 20 KW, FREQUENCY: 50 KHZ - 450 KHZ, MOFSET TRANSISTOR MODULES, 95% CONVERSION EFFICIENCY, SINGLE MAIN CONTROL BOARD, 95 DEGREE MAX INLET WATER TEMPERATURE, 30 PSI MINIMUM DIFFERENTIAL WATER PRESSURE, ELECTRICAL: 208 VOLTS, 3 PHASE, 50/60 HERTZ

MUMM PRODUCTS 350 AUTOMATIC ROTARY 4, 6, AND 8 PACK RING APPLICATOR, OUTPUT: UP TO 75 CANS PER MINUTE DEPENDING ON PRODUCT AND APPLICATION, PACK CAPABILITIES: 4 PACK 6 PACK 8 PACK, CAN DIAMETER: 211 MM, CAN VOLUME: 12 OUNCES 16 OUNCES, AUTOMATIC OPERATION, CAN DOWN SENSOR, FULL GUARD PACKAGE, WX3200 RING STYLE, PUSH BUTTON CONTROLS, OVERALL DIMENSIONS: LENGTH: 54 INCHES WIDTH: 35 INCHES HEIGHT: 71 INCHES (AT A CONVEYOR HEIGHT OF 36 INCHES), ELECTRICALS: 1 PHASE, 60 HZ, 120 VOLTS, 8.5 AMPS, PREVIOUSLY USED IN SPORTS BEVERAGE APPLICATION

STEWART 42A-BO-353 HI-SPEED FULL CASE PLATEN SWITCH CONVEYOR, PROVIDES INSTANTANEOUS, HIGH-SPEED MERGE AND SORTATION. CONVEYOR DIMENSIONS: LENGTH: 65 INCHES WIDTH: 43 INCHES HEIGHT: 41 INCHES. ADJUSTABLE HEIGHT. PLATEN WIDTH: 18 INCHES. 1 TO 2 LANES SORTING. ALLEN-BRADLEY PHOTOSWITCH INLINE SWITCH FOR FULL CASES OR CARTONS. FULLY AUTOMATIC WITH CONTROL PANEL. OVERALL DIMENSIONS: LENGTH: 72 INCHES WIDTH: 72 INCHES HEIGHT: 46 INCHES. MILD STEEL CONSTRUCTION. BALDOR DRIVE MOTOR: 2 HORSEPOWER 1725 RATE PER MINUTE. POWER SUPPLY: 1 PHASE, 60 HZ, 120 VOLTS.

SCHENCK PROCESS LLC ROUND AIRLOCK MULTI-DRY (RAM) 14 WITH SCHENCK PROCESS CT 21 CYCLONE AIR CONVEYOR - USED SCHENCK PROCESS RAM14 AIRLOCK AND CYCLONE SYSTEM WITH: RAM14 AIRLOCK PRESSURE DIFFERENTIAL: UP TO 15 PSI STANDARD TEMPERATURE RATING: 200 F OPTIONAL HIGH-TEMPERATURE RATING: 450F ELECTRICAL REQUIREMENTS: 230/460 VOLTS 60 HZ 3 PHASE PAINTED STEEL CONSTRUCTION SCHENCK PROCESS CT21 CYCLONE BOTTOM FLANGE DIAMETER: INTERNAL: 5 INCHES EXTERNAL: 10 INCHES (2) SIDE FLANGES INTERNAL: 12 INCHES EXTERNAL: 19 INCHES PAINTED STEEL CONSTRUCTION LAST USED WITH PROCESSING COFFEE S/N: 1100321563-010-1

HYTROL CASE BELT CONVEYOR 252 INCHES L X 12 INCHES W, BELT DIMENSIONS: LENGTH: 252 INCHES WIDTH: 12 INCHES, INFEED/DISCHARGE HEIGHT: 25 INCHES, OVERALL DIMENSIONS: LENGTH: 253 INCHES WIDTH: 22 INCHES HEIGHT: 25 INCHES, 0.75 HORSEPOWER MOTOR, ELECTRICAL: VOLTS: 230/460 FREQUENCY: 60 HZ PHASE 3, PAINTED STEEL FRAME

CRETORS FTHC-C15104-1 STAINLESS STEEL BLUE BELT INCLINE CONVEYOR 14 INCH W. INCLINE LENGTH: 264 INCHES, STRAIGHT LENGTH: 48 INCHES, CONVEYOR WIDTH: 14 INCHES, INFEED HEIGHT: 21 INCHES, DISCHARGE HEIGHT: 48 INCHES, DISCHARGE PAN: 40 INCHES, RETRACTABLE DISCHARGE PAN: 6 INCHES, INFEED HOPPER DIMENSIONS: WIDTH: 28 INCHES, DEPTH: 14 INCHES, SANITARY BLUE BELT, MOTOR: 0.75 HP, ELECTRICALS: 460 VOLTS, 3 PHASE, 60 HERTZ, 1.6 AMPS, MOUNTED ON CASTERS, STAINLESS STEEL CONSTRUCTION.

TALON SUPRA MICROWAVE POPCORN BAG SEALER, SPEED UP TO 90 BAGS PER MINUTE, STAINLESS STEEL CONSTRUCTION, ELECTRICAL REQUIREMENTS: 460 VOLTS, 60 HERTZ, 3 PHASE

TALON MFG. SUPRA MICROWAVE POPCORN BAG MAKER, UP TO 300 BAGS PER MINUTE, 8 STATION SEALING MECHANISM, 27 INCH FILM ROLL WIDTH, 54 INCH DISCHARGE CONVEYOR LENGTH, ADJUSTABLE HEIGHT DISCHARGE SET AT 34 INCHES, 460 VOLTS, 60 HZ, 3 PHASE

PROGRIP ES130 AUTOMATIC HANDLE APPLICATOR, SINGLE LANE, UP TO 130 HANDLES PER MINUTE, HANDLE WIDTHS 25 - 40 MILLIMETERS, SEW EURODRIVE SERVO MOTORS, PAINTED MILD STEEL CONSTRUCTION, TOUCH SCREEN HMI, SCREW DOWN LEVELING FEET

RED ROCK SVC WRAPAROUND PRESSURE SENSITIVE LABELER HEAD, C-STYLE FRAME, ADJUSTABLE HEIGHT LABELING HEAD. OVERALL DIMENSIONS: WIDTH: 44 INCHES DEPTH: 40 INCHES HEIGHT: 52 INCHES. MOUNTED ON CASTERS. PREVIOUSLY RUNNING 9.5 INCH L X 6 INCH H LABEL FOR PLANT-BASED CLEANING SOLUTION.

AVERY DENNISON TDI SHORT TAG THERMAL PRINTER, SPEED: UP TO 250 MILLIMETERS PER SECOND, MAXIMUM PRINT WIDTH: 128 MILLIMETERS, TAG DIMENSIONS: MAXIMUM: LENGTH: 330 MILLIMETERS WIDTH: 154 MILLIMETERS, MINIMUM: LENGTH: 50 MILLIMETERS WIDTH: 30 MILLIMETERS, FOIL ROLL DIAMETER: OUTER DIAMETER: 90 MILLIMETERS INNER CORE: 1 INCH, MAXIMUM FOIL LENGTH: 600 METERS, MAXIMUM STACKING HEIGHT: 150 MILLIMETERS, PUSH PUTTON CONTROLS, STAINLESS STEEL EXTERIOR, ELECTRICAL REQUIREMENTS: 115/230-240 VOLTS, 50/60 HERTZ, 1 PHASE

VAC-U-MAX PNEUMATIC CONVEYING SYSTEM WITH: HOPPER DIAMETER: 24 INCHES SIDE INFEED DIAMETER: 4.75 INCHES SMALLER TOP INFEED DIAMETER: 2 INCHES LARGER TOP INFEED DIAMETER: 3 INCHES REMOVAL LID STAINLESS STEEL CONSTRUCTION (4) LOCKABLE CASTERS

STAINLESS STEEL SHRINK SLEEVE HEAT TUNNEL WITH TABLE TOP CONVEYOR, CONVEYOR SPEED: UP TO 10 METERS/MINUTE, APPLICATION DEPENDENT, CONVEYOR BELT: STAINLESS STEEL, MAXIMUM PACKAGE SIZE: WIDTH: 6.3 INCHES HEIGHT: 13.8 INCHES, CONVEYOR DIMENSIONS: LENGTH: 58 INCHES EFFECTIVE WIDTH: 3.5 INCHES, INFEED AND DISCHARGE HEIGHT: 27 INCHES, TUNNEL DIMENSIONS: LENGTH: 39.4 INCHES WIDTH: 5.9 INCHES HEIGHT: 15 INCHES, OVERALL DIMENSIONS: LENGTH: 59.1 INCHES WIDTH: 13.9 INCHES HEIGHT: 59.1 INCHES, CONSTRUCTION: STAINLESS STEEL, ELECTRICAL: 220 V / 50-60 HZ / SINGLE PHASE

FAIRBANKS MODEL 665 1000 LB FLOOR SCALE, CAPACITY: 1000 POUNDS, SCALE DIMENSIONS: LENGTH: 36 INCHES WIDTH: 36 INCHES, GSE 665 DIGITAL CONTROL, STEEL LOADING RAMP, ALLOY STEEL CONSTRUCTION, ELECTRICAL REQUIREMENTS: 90-250 VOLTS, 50/60 HERTZ, 1 PHASE

FAIRBANKS SCALE ON WHEELS 22 KG

HOLMAN PROVEYOR 314HX STAINLESS STEEL CONVEYOR OVEN - USED HOLMAN CONVEYOR OVEN WITH: COOKING CHAMBER DIMENSIONS: LENGTH: 21.5 INCHES WIDTH: 16 INCHES ANALOG CONTROLS APPROXIMATE OVERALL DIMENSIONS: WIDTH: 38.7 INCHES DEPTH: 21.3 INCHES HEIGHT: 16.1 INCHES STAINLESS STEEL CONSTRUCTION ELECTRICAL: 1 PHASE, 60 HZ, 208 VOLTS MACHINE WEIGHT: APPROXIMATELY 90 POUNDS

SEMI-AUTOMATIC CASE STRAPPER, 49.5 INCH WIDTH BY 29 INCH HEIGHT, MAXIMUM CASE SIZE (INCHES): WIDTH: 48 HEIGHT: 30, ARCH DIMENSIONS (INCHES): WIDTH: 49.5 HEIGHT: 29, PLATFORM DIMENSIONS (INCHES): LENGTH: 12 HEIGHT: 30, OVERALL DIMENSIONS (INCHES): LENGTH: 87 WIDTH: 24 HEIGHT: 62, SEMI-AUTOMATIC OPERATION FOOT PEDAL ACTIVATED, PUSH BUTTON CONTROLS, MOTORS (2): 0.75 HORSEPOWER 0.16 HORSEPOWER, ELECTRICAL REQUIREMENTS: 3 PHASE, 60 HERTZ, 460 VOLTS, 2.8 AMPS

AXON EZ-A1 STAINLESS STEEL NECK BANDER WITH PHOTO EYE SENSOR, PRODUCTION OUTPUT UP TO 40 CONTAINERS PER MINUTE, CURRENT FILM DIAMETERS RAN: 1.875 INCHES (50 MM), 1.5 INCHES (55 MM), 1.625 INCHES (46 MM), 1.125 INCHES, INFEED HEIGHT 47.75 INCHES, PHOTO EYE SENSOR, 120 VOLTS, 60 HERTZ, 10 AMPS, 1 PHASE, MOUNTED ON STAINLESS STEEL T STAND WITH CASTERS FOR MOBILITY S/N:

42 INCH DIAMETER STAINLESS STEEL DISC UNSCRAMBLING TABLE WITH: TABLE DIAMETER: 42 INCHES SQUARE SECTION AREA: 71 INCHES LONG X 48 INCHES WIDE DISCHARGE HEIGHT FROM GROUND: 42 INCHES GUIDERAILS: 2 INCHES TALL CASTERS STAINLESS STEEL CONSTRUCTION VARIABLE SPEED CONTROLLER ELECTRICAL REQUIREMENTS: 220 VOLTS

ROLL THROUGH LABELER, LABEL WIDTH: 1 INCH

ACCORDION CONVEYOR, CONVEYOR WIDTH: 18 INCHES, OVERALL CLOSED DIMENSIONS: LENGTH: 30 INCHES WIDTH: 24 INCHES HEIGHT: 32 INCHES, STAINLESS STEEL CONSTRUCTION

ACCUTEK CLEATED INCLINED SS CONVEYOR, HOPPER DIMENSIONS: 34 INCH LONG X 13 INCH WIDE X 33 INCH DEEP, INFEED HEIGHT FROM GROUND: 11 INCH, DISCHARGE HEIGHT FROM GROUND: 84 INCH, CLEAT DIMENSIONS: 11 INCH WIDE X 3.5 INCH LONG, STAINLESS STEEL CONSTRUCTION

PAC STRAPPING PRODUCTS SM65 AUTOMATIC STRAPPING MACHINE, OUTPUT: UP TO 65 STRAPS PER MINUTE, MINIMUM CASE DIMENSIONS: WIDTH: 2.75 INCHES HEIGHT: 0.75 INCHES, CORE SIZE: 8 X 8 INCHES, ADJUSTABLE HEIGHT RANGE: 32.3 - 36.2 INCHES, PUSH BUTTON CONTROLS, APPROXIMATE OVERALL DIMENSIONS: WIDTH: 48 INCHES DEPTH: 55.3 INCHES HEIGHT: 59.25 INCHES, STAINLESS STEEL CONTACT SURFACE, ELECTRICAL: 1 PHASE, 60 HZ, 110 VOLTS, 5 AMPS

ULINE H-959 SEMI-AUTOMATIC POLYPROPYLENE CASE STRAPPER, PRODUCTION SPEED: UP TO 17 STRAPS PER MINUTE, MINIMUM CASE DIMENSIONS: LENGTH: 3.5 INCHES HEIGHT: 2 INCHES, MAXIMUM WEIGHT CAPACITY: 250 POUNDS, STRAP THICKNESS RANGE: 0.02 - 0.026 INCHES, PRE-SET STRAPPING LENGTH RANGE: 0 - 18 FEET, TENSION: 10 - 100 POUNDS, CORES: 8 X 8 INCHES 9 X 8 INCHES, PUSH BUTTON CONTROLS, APPROXIMATE OVERALL DIMENSIONS: LENGTH: 37 INCHES WIDTH: 23 INCHES HEIGHT: 30 INCHES, MOUNTED ON SWIVEL CASTERS, STAINLESS STEEL CONTACT SURFACE, MOTOR: 0.25 HORSEPOWER, ELECTRICAL: 60 HZ, 110 VOLTS, MACHINE WEIGHT: APPROXIMATELY 220 POUNDS

CONSOLIDATED PACKAGING MACHINERY CORP. EA-8 STAINLESS STEEL CAP ELEVATOR WITH 0.5 HP MOTOR. HOPPER DIMENSIONS (INCHES): LENGTH: 40.5 WIDTH: 30.5 DEPTH: 28. BELT DIMENSIONS (INCHES): WIDTH: 8.5 CLEAT FLIGHT: 9 CLEAT HEIGHT: 1. DISCHARGE: 80 INCHES. OVERALL DIMENSIONS (INCHES): LENGTH: 78 WIDTH: 50 HEIGHT: 109. STAINLESS STEEL CONSTRUCTION. MOTOR: HORSEPOWER: 0.5 RPM: 1725. ELECTRICAL: 3 PHASE, 60 HERTZ, 208-230/460 VOLTS.