Woodworking Equipment Commercial and Industrial

Boss Auctions Inc.

Category: SURFACE FINISHING EQUIPMENT

Total Lots: 149

Total Sales: 🔒 Subscribe

Lot Price Distribution

🔒

Subscribe to view

Unlock price distribution and full auction analytics

Sort:

Showing 1–50 of 149 lots

Year	Make	Model	Lot Description	Hammer Price
2011	SCM	SANDYA 3 S 43	2011 SCM SANDYA 3 S 43 WIDE BELT SANDER (2) HEAD. HIGHER QUALITY RESULTS DUE TO THE SPECIAL SHAPE OF THE SECTORS THAT ALLOWS THE OPERATOR TO INTERVENE SOFTLY BUT ALSO IN AN AGGRESSIVE WAY, SIMPLY BY VARYING THE WORKING PRESSURE. THE SETTING OF THE PAD POSITION AND THE POSSIBILITY OF USING FOILS OF DIFFERENT THICKNESS INCREASES ITS VERSALITY. TECHNICAL DATA - WORKING WIDTH - 1100 MM, MIN. - MAX. WORKING THICKNESS - 4 - 170MM, SANDING BELT WIDTH 1.115MM, SANDING BELT LENGTH 1.900MM, MAIN STANDARD MOTOR POWER 11KWFEED BELT SPEED WITH INVERTER 4,5/9 M/MIN, MESAR SECTIONAL PAD: THE BEST FINISH WITH ANY MATERIAL. 600 V 3 PHASE 60 HZ. S/N: AB/206241 2011 · SCM · SANDYA 3 S 43	🔒 Subscribe
2007	JP MACHINES	DH2NA	2007 JP MACHINES DH2NA DOUBLE DRILLING AND HINGE INSERTING MACHINE. FAST SETUP FROM SMALL TO LARGE DOORS WITH PRESET STOPS, CYCLE TIME APPROXIMATELY 4 SECONDS, "OFF THE SHELF COMPONENTS FOR HASSLE FREE MAINTENANCE, MINIMUM DISTANCE BETWEEN HINGES IS 6.5" (165MM), OPTIONAL SERVO CONTROLLED POSITIONING FOR FAST CHANGEOVER OF SIZES, FAST SETUP FROM SMALL TO LARGE DOORS, USER-FRIENDLY MOVABLE HEAD WHICH IS EASY TO MOVE TO THE PRE-SET STOPS. PNEUMATIC LOCK ALLOWS DRILLING AT ANY DISTANCE, QUICK CHANGE HOPPER MAGAZINES WITH A LOADING CAPACITY OF 35 HINGES, INSERTION SLIDE WITH UHMW NON-WEARING PLASTIC, CREATES CHIP-FREE BORES ON MELAMINE AND OTHER SENSITIVE MATERIALS BY DRILLING FROM BELOW, BORING HEADS WITH HARD GEARS AND SPINDLES, LINEAR BEARINGS ON SLIDES FOR UP AND DOWN MOVEMENT, NO TOOLS REQUIRED FOR PRECISION DEPTH ADJUSTMENTS, DOUBLE SAFETY CONTROLS WITH METAL DETECTORS AND PHOTO EYE, PREVENTS BORING UNIT FROM CYCLING AGAIN INTO THE PREVIOUSLY INSTALLED HINGE, DUST EXTRACTION HOODS WITH 4" DIAMETERS, MINIMUM CLOSING DISTANCE BETWEEN HEADS IS 7", 180MM, MAXIMUM OPENING DISTANCE IS 60", 1520MM (OTHER SIZES AVAILABLE UPON REQUEST), PLC CONTROL AND PROXIMITY SENSORS, EMERGENCY CORD SWITCH. SPECIFICATIONS - 2 HP MOTORS, 3600 RPM, 600V 3-PHASE, CYCLE TIME APPROXIMATELY 4 SECONDS, COMPRESSED AIR 90 PSI, WEIGHS APPROXIMATELY 600KG, DIMENSIONS: 80" LONG, 32" WIDE, 50" HIGH. S/N: 570807 2007 · JP MACHINES · DH2NA	🔒 Subscribe
1991	BALESTRINI	PICO ROUND END TENONER	1991 BALESTRINI PICO ROUND END TENONER. FEATURES AND SPECS - PRODUCES STRAIGHT, SIMPLE OR COMPOUND ANGLE ROUND END TENONS FOR BLIND TENONS. RIGHT TWIN TABLES ALLOW FOR (1) PART TO BE TENONED WHILE OTHER TABLE IS UNLOADED AND LOADED, APPROX. (600 TO 700) PER HOUR, 2- 14" X 9" (355 X 230 MM) TABLES TILT 0 - 20, TABLE FENCE SWIVELS UP TO 45, 4-3/4" (120 MM) VERTICAL TABLE ADJUSTMENT, (2) VERTICAL PNEUMATIC HOLDDOWNS, 4 HP CUTTER BLOCK MOTOR, 1 HP CUTTER BLOCK ROTATION MOTOR, 9,000 RPM SPINDLE SPEED, MOVEMENT OF TABLE WITH 0.75 HP MOTOR, 3-15/16" (100 MM) MAX. TENON LENGTH, 1-3/16" (30 MM) MAX. THICKNESS, 1-31/32" (50 MM) MAX. DEPTH. 600 V / 60-HZ / 3-PHASE. S/N: E1270BT30 1991 · BALESTRINI · PICO ROUND END TENONER	🔒 Subscribe
	SCM	SI 15 WF	SCM SI 15 WF 10' SLIDING TABLE SAW SCM · SI 15 WF	🔒 Subscribe
	EUROVAC	III	EUROVAC III DUST COLLECTOR INDUSTRIAL VACUUM/DUST COLLECTOR, 10 HP, 225 CFM. 230/460230/460 EUROVAC · III	🔒 Subscribe
	GRIGGIO	T2000	GRIGGIO T2000 SHAPER, 600V GRIGGIO · T2000	🔒 Subscribe
	MADISON	404	MADISON 404 RIP SAW. SPECIFICATIONS: 15 HP - 3,600 RPM DIRECT DRIVE ARBOR MOTOR; 14" DIA. MAX. SAW BLADE CAP. (9" SMALLEST DIA.), 1-1/2" DIA. ARBOR; 4" THICKNESS CAPACITY. TABLE SIZE 65" X 77" LONG. 30" DISTANCE FROM SAW TO LEFT EDGE OF TABLE. 24-1/4" BETWEEN SAW & COLUMN, AND 24" RIP DISTANCE TO RIGHT OF GAUGE. TOP ROLLER HOLDDOWN WITH 7-1/2" SHORTEST STOCK HANDLED UNDER (1) ROLL, 15" UNDER (2) ROLLS. EQUIPPED WITH & FEATURES: OVERHEAD CUTTING DESIGN WITH SINGLE CAST CHAIN LINKS. CHAIN WITH AUTOMATIC OIL LUBRICATION. 2 HP FEED MOTOR WITH (2) FEED SPEEDS OF 50 & 100 FPM. 460V 60HZ 3 PH. S/N: 22802 MADISON · 404	🔒 Subscribe
	BELFAB		BELFAB DUST COLLECTOR W/ BAGS AND CLASPS, 2 CUSTOM DUMP BINS. 10HP, 575V 60HZ S/N: N/A BELFAB	🔒 Subscribe
	BLUM	M51N 1053	BLUM M51N 1053 HINGE MACHINE. 220V 60HZ 1PH. S/N: CF1150 BLUM · M51N 1053	🔒 Subscribe
	COBALM	D7	COBALM D7 DUST EXTRACTION BENCH. IN EXCELLENT CONDITION, BENCH SIZE OVER 2000MM X 1050MM, INLET VENTS ALL AROUND THE TOP OF THE BENCH AND INLETS ON THE TOP TOO, THIS MACHINE IS SO POWERFUL THAT DUST BEING THROWN AWAY FROM THE BENCH TURNS AROUND BACK INTO THE UNIT!. S/N: 55309828 COBALM · D7	🔒 Subscribe
	EXPRESS STEEL		EXPRESS STEEL 14' SNOW PUSHER - 14'L X 40"H X 42"D. EXPRESS STEEL	🔒 Subscribe
	CRAFTEX	CX413	CRAFTEX CX413 DUST COLLECTOR - 2100 CFM, 3HP, 220V 60HZ 1 PH CRAFTEX · CX413	🔒 Subscribe
1988	GRIGGIO	24"	1988 GRIGGIO 24" WOOD CUTTING BANDSAW. FEATURES AND SPECS, 24 X 33 TILTING TABLE, 22 THROAT CAPACITY. APPROX. 12 UNDER BLADE GUIDE CAPACITY, EUROPEAN STYLE BLADE GUIDES, 3HP, 575V, 3PH MOTOR, FOOT BRAKE. 1988 · GRIGGIO · 24"	🔒 Subscribe
	CHAMPION		CHAMPION DOUBLE PISTON AIR COMPRESSOR S/N: 57084 326 CHAMPION	🔒 Subscribe
	GENERAL	350	GENERAL 350 TABLE SAW - W/ EXCALIBUR OVERARM BLADE GUARD FOR ADDED SAFETY AND SUPERIOR DUST EXTRACTION. 575V, 60HZ, 3 PHASE, 3 HP. S/N: G10185 GENERAL · 350	🔒 Subscribe
	HOLZHER	1220 SUPERCUT	HOLZHER 1220 SUPERCUT VERTICAL SAW. EFFICIENTLY BREAK DOWN SHEET GOODS WITHOUT SACRIFICING THE FLOOR SPACE REQUIRED BY A SLIDING TABLE SAW. PERFECT FOR SHOPS LOOKING TO MAKE INCREASE PRODUCTIVITY WITHOUT EXPANDING THEIR SHOPS FOOTPRINT. 240"L X 108"H , 380V 50HZ, 3PH. S/N W/ REX TRANSFORMER HOLZHER · 1220 SUPERCUT	🔒 Subscribe
	CRAFTEX	CT118	CRAFTEX CT118 3HP DUST COLLECTOR S/N: 14SB-001-08-18, CRAFTEX CT053 1HP DUST COLLECTOR S/N: 14SB-013-10-087, TOOLEX TUFO-4043 DUST COLLECTOR S/N: 1141231 CRAFTEX · CT118	🔒 Subscribe
	PIZZI	9037F	PIZZI 9037F GLUE SPREADING MACHINE WITH TWO HEADS, DOUBLE FUNCTION, CLEANING SYSTEM AND 1 MANUAL GLUE APPLICATOR 0002. INCLUDES 1 PC OF 09043 MANUAL GLUE APPLICATOR TRAY, 1 PC. 09039 ROLLER EXTENSION, AND 2 PCS. 09053 GLUE SPATULAS WITH INTERNAL DELIVERY ON FOUR SIDES. S/N: 0002 PIZZI · 9037F	🔒 Subscribe
	PISTORIUS	SC CW CUT SAW	PISTORIUS SC CW CUT SAW. 550V 3PH, 5HP PISTORIUS · SC CW CUT SAW	🔒 Subscribe
			USED 40MM MOULDER HEADS, 6 40MM PLANNING TERSA, 1 230MM SPIRAL, 1 100MM SPIRAL, 1 100MM SPIRAL 150MM DIA, 1 4 WING 12 DEGREE 60MM L, 1 4 WING 12 DEGREE 80MM L. 12 PCES.	🔒 Subscribe
	PIZZI	A8	PIZZI A8 GLUE FEEDER WITH 1 GLUE SPRAY GUN PIZZI · A8	🔒 Subscribe
	PIZZI	A8	PIZZI A8 GLUE FEEDER WITH 1 GLUE SPRAY GUN PIZZI · A8	🔒 Subscribe
2008	KREMLIN	PMP150	2008 KREMLIN PMP150. THIS IS A SPECIAL UNIT SPECIFICALLY DESIGNED FOR POLYESTER. KREMLIN REXSON 112G. FEATURES AND SPECS - 12 BAR, 139 PSI, AIR :6 BAR --- 87 PSI. 115V/1PH/60HZ. S/N: 11B 1010 2008 · KREMLIN · PMP150	🔒 Subscribe
			USED 1 1/2" MOULDER HEADS, 1 130MM CENTROLOCK, 1 240MM CENTROLOCK, 2 4 WING DUAL ANGLE CORREGATED 180MM L, 1 MICRO TERSA 240MM L. 6 PCES.	🔒 Subscribe
1987	JLT	79D-6	1987 JLT 79D-6 DOOR CLAMP - 1987 JLT DOOR CLAMP SINGLE LEVER VALVE AIR ACTIVATION, PNEUMATIC. LIFT CHARGE APPLIES. S/N N/A 1987 · JLT · 79D-6	🔒 Subscribe
			VARIOUS PORTABLE DUST COLLECTORS AND PARTS.	🔒 Subscribe
	JLT	150B REDI SPREADER	JLT 150B REDI SPREADER GLUE APPLICATOR. 6? X 27? GRID CAPACITY. 100% STEEL CONSTRUCTION. FOOT PEDAL OPERATION. ELIMINATES EXCESS SQUEEZE OUT OF GLUE. DESIGNED TO DISTRIBUTE AN EVEN AMOUNT OF GLUE TO EVERY WOOD COMPONENT. S/N: PLA79.1200 JLT · 150B REDI SPREADER	🔒 Subscribe
2010	LANDIS SANDERS	S500 MODEL 4	2010 LANDIS SANDERS S500 MODEL 4 - 2010 LANDIS S-500 MACHINE FEATURES: POWERFUL DUST COLLECTION. EMERGENCY SHUT OFF SWITCH. 2 - 4" X 59" SAND BELTS S/N: 1929 2010 · LANDIS SANDERS · S500 MODEL 4	🔒 Subscribe
			CLICK VENTING. VARIOUS PIECES, EXTENSIONS AND CLASPS. APPROX 3 LARGE PALLETS.	🔒 Subscribe
2014	LANDIS	WM900	2014 LANDIS WM900 PREMIUM ROTARY SANDER MODEL 4 - GREEN - 2014 LANDIS WM900 PREMIUM ROTARY SANDER WITH DUST COLLECTION ATTACHED. 115V, 60HZ, SINGLE PHASE, 12 AMP., 1HP. S/N: 14712 2014 · LANDIS · WM900	🔒 Subscribe
		FLEX TRIM HUBS	VARIOUS - 4" FLEX TRIM HUBS 18 SLOTS, 8" FLEX TRIM HUBS 18 SLOTS, 10" FLEX TRIM CORE 18 SLOTS. 7 PCES. FLEX TRIM HUBS	🔒 Subscribe
	WEINIG	310MM CENTRO LOACK HEAD, WEINIG 240MM CENTRLOCK HEAD	WEINIG 310MM CENTRO LOACK HEAD, WEINIG 240MM CENTRLOCK HEAD. 3 PCES. WEINIG · 310MM CENTRO LOACK HEAD, WEINIG 240MM CENTRLOCK HEAD	🔒 Subscribe
	GLADU	6 WING TONGUE AND GROOVE SET	GLADU 6 WING TONGUE AND GROOVE SET W/ SPARE BACKERS GLADU · 6 WING TONGUE AND GROOVE SET	🔒 Subscribe
	BOERE	55 H 900, 55 1100, 55 M 1100, 55 M 900, 55 Z 1300	BOERE 55 H 900 HARD SANDING PAD, BOERE 55 1100 HARD SANDING PAD, BOERE 55 M 1100 MEDIUM SANDING PAD, BOERE 55 M 900 MEDIUM SANDING PAD, BOERE 55 Z 1300 SOFT SANDING PAD. APROX 21 PCES. BOERE · 55 H 900, 55 1100, 55 M 1100, 55 M 900, 55 Z 1300	🔒 Subscribe
1981	SANDINGMASTER	C.S.B. 900	1981 SANDINGMASTER C.S.B. 900 BELT SANDER. 35-INCH WIDEBELT SANDER, 1-BELT/DRUM. 380 V / 60-HZ / 3-PHASE. S/N: 713536 1981 · SANDINGMASTER · C.S.B. 900	🔒 Subscribe
	WEINIG	DOUBLE-BACKCARBIDE	WEINIG DOUBLE-BACKCARBIDE KNIFE ONLY 60MM X 100MM, 60MM X 40MM. APROC 9 PCE WEINIG · DOUBLE-BACKCARBIDE	🔒 Subscribe
2017	LANDIS	GP DUAL	2017 LANDIS GP DUAL SANDER - WHITE - THE LANDIS GP DUAL IS A POWERFUL SANDER THAT WILL REDUCE THE WORKLOAD OF ALL YOUR MOST DIFFICULT JOBS. ALSO WITH USE OF CARBIDE WHEELS YOU CAN REDUCE YOUR SANDPAPER COST BY 50% OR MORE. FEATURES - (2) EXPANDING WHEELS 4 X 6 (102 X 152 MM) ON BAYONET FITTING. DIRECT DRIVE BLOWER CREATES POWERFUL SUCTION. INTERCHANGEABLE BAYONET SHAFTS ALLOWING A VARIETY OF DIFFERENT GRINDING WHEELS ON THE BOTH SIDES. COMPACT, LESS THAN 3' (930 MM) WIDE. BUILT TO LAST, EASY TO MAINTENANCE. SPECIFICATIONS - DIMENSIONS: WIDTH: 36" (914 MM), DEPTH: 36" (914 MM), HEIGHT: 57" (1448 MM), NET WEIGHT: 350 LBS (159 KG), CRATED WEIGHT: 515 LBS (234 KG), VOLTAGE: 230 V, 15 AMPS, 2 HP, 1 PHASE. 208/230V. 2017 · LANDIS · GP DUAL	🔒 Subscribe
	WEINIG	DOUBLE-BACKCARBIDE	WEINIG DOUBLE-BACKCARBIDE KNIFE ONLY 50MM X 100MM. APROX 7 PCE WEINIG · DOUBLE-BACKCARBIDE	🔒 Subscribe
			VARIOUS SLIDING TABLE SAW BLADES - 1" BORE 14" 36 TEETH, 1" BORE 12" 24 TEETH	🔒 Subscribe
		D7208, D7056	POD/RAIL CNC TOOLING, DIAMOND - CABINET DOORS, OGEE D7208, 1/4 ROUND D7056. 2 PCES. D7208, D7056	🔒 Subscribe
	CRAFTSMAN	10"	CRAFTSMAN 10" RADIAL SAW, FULL MULTI POSITION, PIVOT ARM AND SAW, MITER, GREAT CONDITION. CAN PLACE ON TABLE TOP OR STAND. 115V/1PH/60HZ. S/N: 90201M0181 CRAFTSMAN · 10"	🔒 Subscribe
			POD/RAIL CNC TOOLING, INSERT BEAD CUTTERS, V GROOVE D54060, BEAD D54059. 2 PCES	🔒 Subscribe
		D54058	POD/RAIL CNC TOOLING, INSERT BEAD CUTTER, BEAD D54058. 1 PCE. D54058	🔒 Subscribe
	WEINIG	DOUBLE-BACK CARBIDE	WEINIG DOUBLE-BACK CARBIDE WITH BACKING PLATE, 60X38X10MM, 2 3/8"X150MM, 1 1/2 150MM. APROX 8 PCE. WEINIG · DOUBLE-BACK CARBIDE	🔒 Subscribe
	WEINIG	DOUBLE-BACK CARBIDE	WEINIG DOUBLE-BACK CARBIDE WITH BACKING PLATE, 60X38X10MM, 2 3/8"X150MM, 100X60X10MM. APROX 7 PCE. WEINIG · DOUBLE-BACK CARBIDE	🔒 Subscribe
	KING	KC-8251PN	KING KC-8251PN 23 GA HEADLESS PIN NAILER KIT, KING KC-8225NL 16 GA. X 2 1/2" BRAD NAILER KIT. 2 PCES. KING · KC-8251PN	🔒 Subscribe
	DIAMOND	RAIL D7055, RAIL D7056	DIAMOND RAIL D7055, RAIL D7056 POD/RAIL CNC TOOLING. 2 PCES. DIAMOND · RAIL D7055, RAIL D7056	🔒 Subscribe
	AIGNER	MOUTING RAIL 250MM	AIGNER MOUTING RAIL 250MM AIGNER · MOUTING RAIL 250MM	🔒 Subscribe
			SHAPER TOOLING, USED GLADU OUTSIDE PROFILE - DOORS, BRAZED, 1 1/4" BORE	🔒 Subscribe
			MOULDER TOOLING, USED MISC BRAZED TOOLING - 40MM BORE, BEVELS, BULL NOSE, STRAIGHTS. 12 PCES.	🔒 Subscribe

Year	Make	Model	Description	Price
2011	SCM	SANDYA 3 S 43	2011 SCM SANDYA 3 S 43 WIDE BELT SANDER (2) HEAD. HIGHER QUALITY RESULTS DUE TO THE SPECIAL SHAPE OF THE SECTORS THAT ALLOWS THE OPERATOR TO INTERVENE SOFTLY BUT ALSO IN AN AGGRESSIVE WAY, SIMPLY BY VARYING THE WORKING PRESSURE. THE SETTING OF THE PAD POSITION AND THE POSSIBILITY OF USING FOILS OF DIFFERENT THICKNESS INCREASES ITS VERSALITY. TECHNICAL DATA - WORKING WIDTH - 1100 MM, MIN. - MAX. WORKING THICKNESS - 4 - 170MM, SANDING BELT WIDTH 1.115MM, SANDING BELT LENGTH 1.900MM, MAIN STANDARD MOTOR POWER 11KWFEED BELT SPEED WITH INVERTER 4,5/9 M/MIN, MESAR SECTIONAL PAD: THE BEST FINISH WITH ANY MATERIAL. 600 V 3 PHASE 60 HZ. S/N: AB/206241	🔒 Subscribe
2007	JP MACHINES	DH2NA	2007 JP MACHINES DH2NA DOUBLE DRILLING AND HINGE INSERTING MACHINE. FAST SETUP FROM SMALL TO LARGE DOORS WITH PRESET STOPS, CYCLE TIME APPROXIMATELY 4 SECONDS, "OFF THE SHELF COMPONENTS FOR HASSLE FREE MAINTENANCE, MINIMUM DISTANCE BETWEEN HINGES IS 6.5" (165MM), OPTIONAL SERVO CONTROLLED POSITIONING FOR FAST CHANGEOVER OF SIZES, FAST SETUP FROM SMALL TO LARGE DOORS, USER-FRIENDLY MOVABLE HEAD WHICH IS EASY TO MOVE TO THE PRE-SET STOPS. PNEUMATIC LOCK ALLOWS DRILLING AT ANY DISTANCE, QUICK CHANGE HOPPER MAGAZINES WITH A LOADING CAPACITY OF 35 HINGES, INSERTION SLIDE WITH UHMW NON-WEARING PLASTIC, CREATES CHIP-FREE BORES ON MELAMINE AND OTHER SENSITIVE MATERIALS BY DRILLING FROM BELOW, BORING HEADS WITH HARD GEARS AND SPINDLES, LINEAR BEARINGS ON SLIDES FOR UP AND DOWN MOVEMENT, NO TOOLS REQUIRED FOR PRECISION DEPTH ADJUSTMENTS, DOUBLE SAFETY CONTROLS WITH METAL DETECTORS AND PHOTO EYE, PREVENTS BORING UNIT FROM CYCLING AGAIN INTO THE PREVIOUSLY INSTALLED HINGE, DUST EXTRACTION HOODS WITH 4" DIAMETERS, MINIMUM CLOSING DISTANCE BETWEEN HEADS IS 7", 180MM, MAXIMUM OPENING DISTANCE IS 60", 1520MM (OTHER SIZES AVAILABLE UPON REQUEST), PLC CONTROL AND PROXIMITY SENSORS, EMERGENCY CORD SWITCH. SPECIFICATIONS - 2 HP MOTORS, 3600 RPM, 600V 3-PHASE, CYCLE TIME APPROXIMATELY 4 SECONDS, COMPRESSED AIR 90 PSI, WEIGHS APPROXIMATELY 600KG, DIMENSIONS: 80" LONG, 32" WIDE, 50" HIGH. S/N: 570807	🔒 Subscribe
1991	BALESTRINI	PICO ROUND END TENONER	1991 BALESTRINI PICO ROUND END TENONER. FEATURES AND SPECS - PRODUCES STRAIGHT, SIMPLE OR COMPOUND ANGLE ROUND END TENONS FOR BLIND TENONS. RIGHT TWIN TABLES ALLOW FOR (1) PART TO BE TENONED WHILE OTHER TABLE IS UNLOADED AND LOADED, APPROX. (600 TO 700) PER HOUR, 2- 14" X 9" (355 X 230 MM) TABLES TILT 0 - 20, TABLE FENCE SWIVELS UP TO 45, 4-3/4" (120 MM) VERTICAL TABLE ADJUSTMENT, (2) VERTICAL PNEUMATIC HOLDDOWNS, 4 HP CUTTER BLOCK MOTOR, 1 HP CUTTER BLOCK ROTATION MOTOR, 9,000 RPM SPINDLE SPEED, MOVEMENT OF TABLE WITH 0.75 HP MOTOR, 3-15/16" (100 MM) MAX. TENON LENGTH, 1-3/16" (30 MM) MAX. THICKNESS, 1-31/32" (50 MM) MAX. DEPTH. 600 V / 60-HZ / 3-PHASE. S/N: E1270BT30	🔒 Subscribe
	SCM	SI 15 WF	SCM SI 15 WF 10' SLIDING TABLE SAW	🔒 Subscribe
	EUROVAC	III	EUROVAC III DUST COLLECTOR INDUSTRIAL VACUUM/DUST COLLECTOR, 10 HP, 225 CFM. 230/460230/460	🔒 Subscribe
	GRIGGIO	T2000	GRIGGIO T2000 SHAPER, 600V	🔒 Subscribe
	MADISON	404	MADISON 404 RIP SAW. SPECIFICATIONS: 15 HP - 3,600 RPM DIRECT DRIVE ARBOR MOTOR; 14" DIA. MAX. SAW BLADE CAP. (9" SMALLEST DIA.), 1-1/2" DIA. ARBOR; 4" THICKNESS CAPACITY. TABLE SIZE 65" X 77" LONG. 30" DISTANCE FROM SAW TO LEFT EDGE OF TABLE. 24-1/4" BETWEEN SAW & COLUMN, AND 24" RIP DISTANCE TO RIGHT OF GAUGE. TOP ROLLER HOLDDOWN WITH 7-1/2" SHORTEST STOCK HANDLED UNDER (1) ROLL, 15" UNDER (2) ROLLS. EQUIPPED WITH & FEATURES: OVERHEAD CUTTING DESIGN WITH SINGLE CAST CHAIN LINKS. CHAIN WITH AUTOMATIC OIL LUBRICATION. 2 HP FEED MOTOR WITH (2) FEED SPEEDS OF 50 & 100 FPM. 460V 60HZ 3 PH. S/N: 22802	🔒 Subscribe
	BELFAB		BELFAB DUST COLLECTOR W/ BAGS AND CLASPS, 2 CUSTOM DUMP BINS. 10HP, 575V 60HZ S/N: N/A	🔒 Subscribe
	BLUM	M51N 1053	BLUM M51N 1053 HINGE MACHINE. 220V 60HZ 1PH. S/N: CF1150	🔒 Subscribe
	COBALM	D7	COBALM D7 DUST EXTRACTION BENCH. IN EXCELLENT CONDITION, BENCH SIZE OVER 2000MM X 1050MM, INLET VENTS ALL AROUND THE TOP OF THE BENCH AND INLETS ON THE TOP TOO, THIS MACHINE IS SO POWERFUL THAT DUST BEING THROWN AWAY FROM THE BENCH TURNS AROUND BACK INTO THE UNIT!. S/N: 55309828	🔒 Subscribe
	EXPRESS STEEL		EXPRESS STEEL 14' SNOW PUSHER - 14'L X 40"H X 42"D.	🔒 Subscribe
	CRAFTEX	CX413	CRAFTEX CX413 DUST COLLECTOR - 2100 CFM, 3HP, 220V 60HZ 1 PH	🔒 Subscribe
1988	GRIGGIO	24"	1988 GRIGGIO 24" WOOD CUTTING BANDSAW. FEATURES AND SPECS, 24 X 33 TILTING TABLE, 22 THROAT CAPACITY. APPROX. 12 UNDER BLADE GUIDE CAPACITY, EUROPEAN STYLE BLADE GUIDES, 3HP, 575V, 3PH MOTOR, FOOT BRAKE.	🔒 Subscribe
	CHAMPION		CHAMPION DOUBLE PISTON AIR COMPRESSOR S/N: 57084 326	🔒 Subscribe
	GENERAL	350	GENERAL 350 TABLE SAW - W/ EXCALIBUR OVERARM BLADE GUARD FOR ADDED SAFETY AND SUPERIOR DUST EXTRACTION. 575V, 60HZ, 3 PHASE, 3 HP. S/N: G10185	🔒 Subscribe
	HOLZHER	1220 SUPERCUT	HOLZHER 1220 SUPERCUT VERTICAL SAW. EFFICIENTLY BREAK DOWN SHEET GOODS WITHOUT SACRIFICING THE FLOOR SPACE REQUIRED BY A SLIDING TABLE SAW. PERFECT FOR SHOPS LOOKING TO MAKE INCREASE PRODUCTIVITY WITHOUT EXPANDING THEIR SHOPS FOOTPRINT. 240"L X 108"H , 380V 50HZ, 3PH. S/N W/ REX TRANSFORMER	🔒 Subscribe
	CRAFTEX	CT118	CRAFTEX CT118 3HP DUST COLLECTOR S/N: 14SB-001-08-18, CRAFTEX CT053 1HP DUST COLLECTOR S/N: 14SB-013-10-087, TOOLEX TUFO-4043 DUST COLLECTOR S/N: 1141231	🔒 Subscribe
	PIZZI	9037F	PIZZI 9037F GLUE SPREADING MACHINE WITH TWO HEADS, DOUBLE FUNCTION, CLEANING SYSTEM AND 1 MANUAL GLUE APPLICATOR 0002. INCLUDES 1 PC OF 09043 MANUAL GLUE APPLICATOR TRAY, 1 PC. 09039 ROLLER EXTENSION, AND 2 PCS. 09053 GLUE SPATULAS WITH INTERNAL DELIVERY ON FOUR SIDES. S/N: 0002	🔒 Subscribe
	PISTORIUS	SC CW CUT SAW	PISTORIUS SC CW CUT SAW. 550V 3PH, 5HP	🔒 Subscribe
			USED 40MM MOULDER HEADS, 6 40MM PLANNING TERSA, 1 230MM SPIRAL, 1 100MM SPIRAL, 1 100MM SPIRAL 150MM DIA, 1 4 WING 12 DEGREE 60MM L, 1 4 WING 12 DEGREE 80MM L. 12 PCES.	🔒 Subscribe
	PIZZI	A8	PIZZI A8 GLUE FEEDER WITH 1 GLUE SPRAY GUN	🔒 Subscribe
	PIZZI	A8	PIZZI A8 GLUE FEEDER WITH 1 GLUE SPRAY GUN	🔒 Subscribe
2008	KREMLIN	PMP150	2008 KREMLIN PMP150. THIS IS A SPECIAL UNIT SPECIFICALLY DESIGNED FOR POLYESTER. KREMLIN REXSON 112G. FEATURES AND SPECS - 12 BAR, 139 PSI, AIR :6 BAR --- 87 PSI. 115V/1PH/60HZ. S/N: 11B 1010	🔒 Subscribe
			USED 1 1/2" MOULDER HEADS, 1 130MM CENTROLOCK, 1 240MM CENTROLOCK, 2 4 WING DUAL ANGLE CORREGATED 180MM L, 1 MICRO TERSA 240MM L. 6 PCES.	🔒 Subscribe
1987	JLT	79D-6	1987 JLT 79D-6 DOOR CLAMP - 1987 JLT DOOR CLAMP SINGLE LEVER VALVE AIR ACTIVATION, PNEUMATIC. LIFT CHARGE APPLIES. S/N N/A	🔒 Subscribe
			VARIOUS PORTABLE DUST COLLECTORS AND PARTS.	🔒 Subscribe
	JLT	150B REDI SPREADER	JLT 150B REDI SPREADER GLUE APPLICATOR. 6? X 27? GRID CAPACITY. 100% STEEL CONSTRUCTION. FOOT PEDAL OPERATION. ELIMINATES EXCESS SQUEEZE OUT OF GLUE. DESIGNED TO DISTRIBUTE AN EVEN AMOUNT OF GLUE TO EVERY WOOD COMPONENT. S/N: PLA79.1200	🔒 Subscribe
2010	LANDIS SANDERS	S500 MODEL 4	2010 LANDIS SANDERS S500 MODEL 4 - 2010 LANDIS S-500 MACHINE FEATURES: POWERFUL DUST COLLECTION. EMERGENCY SHUT OFF SWITCH. 2 - 4" X 59" SAND BELTS S/N: 1929	🔒 Subscribe
			CLICK VENTING. VARIOUS PIECES, EXTENSIONS AND CLASPS. APPROX 3 LARGE PALLETS.	🔒 Subscribe
2014	LANDIS	WM900	2014 LANDIS WM900 PREMIUM ROTARY SANDER MODEL 4 - GREEN - 2014 LANDIS WM900 PREMIUM ROTARY SANDER WITH DUST COLLECTION ATTACHED. 115V, 60HZ, SINGLE PHASE, 12 AMP., 1HP. S/N: 14712	🔒 Subscribe
		FLEX TRIM HUBS	VARIOUS - 4" FLEX TRIM HUBS 18 SLOTS, 8" FLEX TRIM HUBS 18 SLOTS, 10" FLEX TRIM CORE 18 SLOTS. 7 PCES.	🔒 Subscribe
	WEINIG	310MM CENTRO LOACK HEAD, WEINIG 240MM CENTRLOCK HEAD	WEINIG 310MM CENTRO LOACK HEAD, WEINIG 240MM CENTRLOCK HEAD. 3 PCES.	🔒 Subscribe
	GLADU	6 WING TONGUE AND GROOVE SET	GLADU 6 WING TONGUE AND GROOVE SET W/ SPARE BACKERS	🔒 Subscribe
	BOERE	55 H 900, 55 1100, 55 M 1100, 55 M 900, 55 Z 1300	BOERE 55 H 900 HARD SANDING PAD, BOERE 55 1100 HARD SANDING PAD, BOERE 55 M 1100 MEDIUM SANDING PAD, BOERE 55 M 900 MEDIUM SANDING PAD, BOERE 55 Z 1300 SOFT SANDING PAD. APROX 21 PCES.	🔒 Subscribe
1981	SANDINGMASTER	C.S.B. 900	1981 SANDINGMASTER C.S.B. 900 BELT SANDER. 35-INCH WIDEBELT SANDER, 1-BELT/DRUM. 380 V / 60-HZ / 3-PHASE. S/N: 713536	🔒 Subscribe
	WEINIG	DOUBLE-BACKCARBIDE	WEINIG DOUBLE-BACKCARBIDE KNIFE ONLY 60MM X 100MM, 60MM X 40MM. APROC 9 PCE	🔒 Subscribe
2017	LANDIS	GP DUAL	2017 LANDIS GP DUAL SANDER - WHITE - THE LANDIS GP DUAL IS A POWERFUL SANDER THAT WILL REDUCE THE WORKLOAD OF ALL YOUR MOST DIFFICULT JOBS. ALSO WITH USE OF CARBIDE WHEELS YOU CAN REDUCE YOUR SANDPAPER COST BY 50% OR MORE. FEATURES - (2) EXPANDING WHEELS 4 X 6 (102 X 152 MM) ON BAYONET FITTING. DIRECT DRIVE BLOWER CREATES POWERFUL SUCTION. INTERCHANGEABLE BAYONET SHAFTS ALLOWING A VARIETY OF DIFFERENT GRINDING WHEELS ON THE BOTH SIDES. COMPACT, LESS THAN 3' (930 MM) WIDE. BUILT TO LAST, EASY TO MAINTENANCE. SPECIFICATIONS - DIMENSIONS: WIDTH: 36" (914 MM), DEPTH: 36" (914 MM), HEIGHT: 57" (1448 MM), NET WEIGHT: 350 LBS (159 KG), CRATED WEIGHT: 515 LBS (234 KG), VOLTAGE: 230 V, 15 AMPS, 2 HP, 1 PHASE. 208/230V.	🔒 Subscribe
	WEINIG	DOUBLE-BACKCARBIDE	WEINIG DOUBLE-BACKCARBIDE KNIFE ONLY 50MM X 100MM. APROX 7 PCE	🔒 Subscribe
			VARIOUS SLIDING TABLE SAW BLADES - 1" BORE 14" 36 TEETH, 1" BORE 12" 24 TEETH	🔒 Subscribe
		D7208, D7056	POD/RAIL CNC TOOLING, DIAMOND - CABINET DOORS, OGEE D7208, 1/4 ROUND D7056. 2 PCES.	🔒 Subscribe
	CRAFTSMAN	10"	CRAFTSMAN 10" RADIAL SAW, FULL MULTI POSITION, PIVOT ARM AND SAW, MITER, GREAT CONDITION. CAN PLACE ON TABLE TOP OR STAND. 115V/1PH/60HZ. S/N: 90201M0181	🔒 Subscribe
			POD/RAIL CNC TOOLING, INSERT BEAD CUTTERS, V GROOVE D54060, BEAD D54059. 2 PCES	🔒 Subscribe
		D54058	POD/RAIL CNC TOOLING, INSERT BEAD CUTTER, BEAD D54058. 1 PCE.	🔒 Subscribe
	WEINIG	DOUBLE-BACK CARBIDE	WEINIG DOUBLE-BACK CARBIDE WITH BACKING PLATE, 60X38X10MM, 2 3/8"X150MM, 1 1/2 150MM. APROX 8 PCE.	🔒 Subscribe
	WEINIG	DOUBLE-BACK CARBIDE	WEINIG DOUBLE-BACK CARBIDE WITH BACKING PLATE, 60X38X10MM, 2 3/8"X150MM, 100X60X10MM. APROX 7 PCE.	🔒 Subscribe
	KING	KC-8251PN	KING KC-8251PN 23 GA HEADLESS PIN NAILER KIT, KING KC-8225NL 16 GA. X 2 1/2" BRAD NAILER KIT. 2 PCES.	🔒 Subscribe
	DIAMOND	RAIL D7055, RAIL D7056	DIAMOND RAIL D7055, RAIL D7056 POD/RAIL CNC TOOLING. 2 PCES.	🔒 Subscribe
	AIGNER	MOUTING RAIL 250MM	AIGNER MOUTING RAIL 250MM	🔒 Subscribe
			SHAPER TOOLING, USED GLADU OUTSIDE PROFILE - DOORS, BRAZED, 1 1/4" BORE	🔒 Subscribe
			MOULDER TOOLING, USED MISC BRAZED TOOLING - 40MM BORE, BEVELS, BULL NOSE, STRAIGHTS. 12 PCES.	🔒 Subscribe

2011 SCM SANDYA 3 S 43

SURFACE FINISHING EQUIPMENT

2011 SCM SANDYA 3 S 43 WIDE BELT SANDER (2) HEAD. HIGHER QUALITY RESULTS DUE TO THE SPECIAL SHAPE OF...

Hammer Price: 🔒

2007 JP MACHINES DH2NA

WOODWORKING EQUIPMENT

2007 JP MACHINES DH2NA DOUBLE DRILLING AND HINGE INSERTING MACHINE. FAST SETUP FROM SMALL TO LARGE D...

Hammer Price: 🔒

1991 BALESTRINI PICO ROUND END TENONER

WOODWORKING EQUIPMENT

1991 BALESTRINI PICO ROUND END TENONER. FEATURES AND SPECS - PRODUCES STRAIGHT, SIMPLE OR COMPOUND A...

Hammer Price: 🔒

SCM SI 15 WF

WOODWORKING EQUIPMENT

SCM SI 15 WF 10' SLIDING TABLE SAW...

Hammer Price: 🔒

EUROVAC III

DUST COLLECTION EQUIPMENT

EUROVAC III DUST COLLECTOR INDUSTRIAL VACUUM/DUST COLLECTOR, 10 HP, 225 CFM. 230/460230/460...

Hammer Price: 🔒

GRIGGIO T2000

WOODWORKING EQUIPMENT

GRIGGIO T2000 SHAPER, 600V...

Hammer Price: 🔒

MADISON 404

WOODWORKING EQUIPMENT

MADISON 404 RIP SAW. SPECIFICATIONS: 15 HP - 3,600 RPM DIRECT DRIVE ARBOR MOTOR; 14" DIA. MAX. SAW B...

Hammer Price: 🔒

BELFAB

DUST COLLECTION EQUIPMENT

BELFAB DUST COLLECTOR W/ BAGS AND CLASPS, 2 CUSTOM DUMP BINS. 10HP, 575V 60HZ S/N: N/A...

Hammer Price: 🔒

BLUM M51N 1053

WOODWORKING EQUIPMENT

BLUM M51N 1053 HINGE MACHINE. 220V 60HZ 1PH. S/N: CF1150...

Hammer Price: 🔒

COBALM D7

DUST COLLECTION EQUIPMENT

COBALM D7 DUST EXTRACTION BENCH. IN EXCELLENT CONDITION, BENCH SIZE OVER 2000MM X 1050MM, INLET VENT...

Hammer Price: 🔒

EXPRESS STEEL

CONSTRUCTION EQUIPMENT

EXPRESS STEEL 14' SNOW PUSHER - 14'L X 40"H X 42"D....

Hammer Price: 🔒

CRAFTEX CX413

DUST COLLECTION EQUIPMENT

CRAFTEX CX413 DUST COLLECTOR - 2100 CFM, 3HP, 220V 60HZ 1 PH...

Hammer Price: 🔒

1988 GRIGGIO 24"

WOODWORKING EQUIPMENT

1988 GRIGGIO 24" WOOD CUTTING BANDSAW. FEATURES AND SPECS, 24 X 33 TILTING TABLE, 22 THROAT CAPACITY...

Hammer Price: 🔒

CHAMPION

AIR COMPRESSORS

CHAMPION DOUBLE PISTON AIR COMPRESSOR S/N: 57084 326...

Hammer Price: 🔒

GENERAL 350

WOODWORKING EQUIPMENT

GENERAL 350 TABLE SAW - W/ EXCALIBUR OVERARM BLADE GUARD FOR ADDED SAFETY AND SUPERIOR DUST EXTRACTI...

Hammer Price: 🔒

HOLZHER 1220 SUPERCUT

WOODWORKING EQUIPMENT

HOLZHER 1220 SUPERCUT VERTICAL SAW. EFFICIENTLY BREAK DOWN SHEET GOODS WITHOUT SACRIFICING THE FLOOR...

Hammer Price: 🔒

CRAFTEX CT118

DUST COLLECTION EQUIPMENT

CRAFTEX CT118 3HP DUST COLLECTOR S/N: 14SB-001-08-18, CRAFTEX CT053 1HP DUST COLLECTOR S/N: 14SB-013...

Hammer Price: 🔒

PIZZI 9037F

WOODWORKING EQUIPMENT

PIZZI 9037F GLUE SPREADING MACHINE WITH TWO HEADS, DOUBLE FUNCTION, CLEANING SYSTEM AND 1 MANUAL GLU...

Hammer Price: 🔒

PISTORIUS SC CW CUT SAW

WOODWORKING EQUIPMENT

PISTORIUS SC CW CUT SAW. 550V 3PH, 5HP...

Hammer Price: 🔒

WOODWORKING EQUIPMENT

USED 40MM MOULDER HEADS, 6 40MM PLANNING TERSA, 1 230MM SPIRAL, 1 100MM SPIRAL, 1 100MM SPIRAL 150MM...

Hammer Price: 🔒

PIZZI A8

WOODWORKING EQUIPMENT

PIZZI A8 GLUE FEEDER WITH 1 GLUE SPRAY GUN...

Hammer Price: 🔒

PIZZI A8

WOODWORKING EQUIPMENT

PIZZI A8 GLUE FEEDER WITH 1 GLUE SPRAY GUN...

Hammer Price: 🔒

2008 KREMLIN PMP150

SURFACE FINISHING EQUIPMENT

2008 KREMLIN PMP150. THIS IS A SPECIAL UNIT SPECIFICALLY DESIGNED FOR POLYESTER. KREMLIN REXSON 112G...

Hammer Price: 🔒

WOODWORKING EQUIPMENT

USED 1 1/2" MOULDER HEADS, 1 130MM CENTROLOCK, 1 240MM CENTROLOCK, 2 4 WING DUAL ANGLE CORREGATED 18...

Hammer Price: 🔒

1987 JLT 79D-6

MISC

1987 JLT 79D-6 DOOR CLAMP - 1987 JLT DOOR CLAMP SINGLE LEVER VALVE AIR ACTIVATION, PNEUMATIC. LIFT C...

Hammer Price: 🔒

DUST COLLECTION EQUIPMENT

VARIOUS PORTABLE DUST COLLECTORS AND PARTS....

Hammer Price: 🔒

JLT 150B REDI SPREADER

WOODWORKING EQUIPMENT

JLT 150B REDI SPREADER GLUE APPLICATOR. 6? X 27? GRID CAPACITY. 100% STEEL CONSTRUCTION. FOOT PEDAL ...

Hammer Price: 🔒

2010 LANDIS SANDERS S500 MODEL 4

SURFACE FINISHING EQUIPMENT

2010 LANDIS SANDERS S500 MODEL 4 - 2010 LANDIS S-500 MACHINE FEATURES: POWERFUL DUST COLLECTION. EME...

Hammer Price: 🔒

MISC

CLICK VENTING. VARIOUS PIECES, EXTENSIONS AND CLASPS. APPROX 3 LARGE PALLETS....

Hammer Price: 🔒

2014 LANDIS WM900

SURFACE FINISHING EQUIPMENT

2014 LANDIS WM900 PREMIUM ROTARY SANDER MODEL 4 - GREEN - 2014 LANDIS WM900 PREMIUM ROTARY SANDER WI...

Hammer Price: 🔒

FLEX TRIM HUBS

MISC

VARIOUS - 4" FLEX TRIM HUBS 18 SLOTS, 8" FLEX TRIM HUBS 18 SLOTS, 10" FLEX TRIM CORE 18 SLOTS. 7 PCE...

Hammer Price: 🔒

WEINIG 310MM CENTRO LOACK HEAD, WEINIG 240MM CENTRLOCK HEAD

WOODWORKING EQUIPMENT

WEINIG 310MM CENTRO LOACK HEAD, WEINIG 240MM CENTRLOCK HEAD. 3 PCES....

Hammer Price: 🔒

GLADU 6 WING TONGUE AND GROOVE SET

WOODWORKING EQUIPMENT

GLADU 6 WING TONGUE AND GROOVE SET W/ SPARE BACKERS...

Hammer Price: 🔒

BOERE 55 H 900, 55 1100, 55 M 1100, 55 M 900, 55 Z 1300

SURFACE FINISHING EQUIPMENT

BOERE 55 H 900 HARD SANDING PAD, BOERE 55 1100 HARD SANDING PAD, BOERE 55 M 1100 MEDIUM SANDING PAD,...

Hammer Price: 🔒

1981 SANDINGMASTER C.S.B. 900

SURFACE FINISHING EQUIPMENT

1981 SANDINGMASTER C.S.B. 900 BELT SANDER. 35-INCH WIDEBELT SANDER, 1-BELT/DRUM. 380 V / 60-HZ / 3-P...

Hammer Price: 🔒

WEINIG DOUBLE-BACKCARBIDE

WOODWORKING EQUIPMENT

WEINIG DOUBLE-BACKCARBIDE KNIFE ONLY 60MM X 100MM, 60MM X 40MM. APROC 9 PCE...

Hammer Price: 🔒

2017 LANDIS GP DUAL

SURFACE FINISHING EQUIPMENT

2017 LANDIS GP DUAL SANDER - WHITE - THE LANDIS GP DUAL IS A POWERFUL SANDER THAT WILL REDUCE THE WO...

Hammer Price: 🔒

WEINIG DOUBLE-BACKCARBIDE

WOODWORKING EQUIPMENT

WEINIG DOUBLE-BACKCARBIDE KNIFE ONLY 50MM X 100MM. APROX 7 PCE...

Hammer Price: 🔒

WOODWORKING EQUIPMENT

VARIOUS SLIDING TABLE SAW BLADES - 1" BORE 14" 36 TEETH, 1" BORE 12" 24 TEETH...

Hammer Price: 🔒

D7208, D7056

CNC MACHINE CENTERS

POD/RAIL CNC TOOLING, DIAMOND - CABINET DOORS, OGEE D7208, 1/4 ROUND D7056. 2 PCES....

Hammer Price: 🔒

CRAFTSMAN 10"

WOODWORKING EQUIPMENT

CRAFTSMAN 10" RADIAL SAW, FULL MULTI POSITION, PIVOT ARM AND SAW, MITER, GREAT CONDITION. CAN PLACE ...

Hammer Price: 🔒

CNC MACHINE CENTERS

POD/RAIL CNC TOOLING, INSERT BEAD CUTTERS, V GROOVE D54060, BEAD D54059. 2 PCES...

Hammer Price: 🔒

D54058

CNC MACHINE CENTERS

POD/RAIL CNC TOOLING, INSERT BEAD CUTTER, BEAD D54058. 1 PCE....

Hammer Price: 🔒

WEINIG DOUBLE-BACK CARBIDE

WOODWORKING EQUIPMENT

WEINIG DOUBLE-BACK CARBIDE WITH BACKING PLATE, 60X38X10MM, 2 3/8"X150MM, 1 1/2 150MM. APROX 8 PCE....

Hammer Price: 🔒

WEINIG DOUBLE-BACK CARBIDE

WOODWORKING EQUIPMENT

WEINIG DOUBLE-BACK CARBIDE WITH BACKING PLATE, 60X38X10MM, 2 3/8"X150MM, 100X60X10MM. APROX 7 PCE....

Hammer Price: 🔒

KING KC-8251PN

WOODWORKING EQUIPMENT

KING KC-8251PN 23 GA HEADLESS PIN NAILER KIT, KING KC-8225NL 16 GA. X 2 1/2" BRAD NAILER KIT. 2 PCES...

Hammer Price: 🔒

DIAMOND RAIL D7055, RAIL D7056

CNC MACHINE CENTERS

DIAMOND RAIL D7055, RAIL D7056 POD/RAIL CNC TOOLING. 2 PCES....

Hammer Price: 🔒

AIGNER MOUTING RAIL 250MM

WOODWORKING EQUIPMENT

AIGNER MOUTING RAIL 250MM...

Hammer Price: 🔒

WOODWORKING EQUIPMENT

SHAPER TOOLING, USED GLADU OUTSIDE PROFILE - DOORS, BRAZED, 1 1/4" BORE...

Hammer Price: 🔒

WOODWORKING EQUIPMENT

MOULDER TOOLING, USED MISC BRAZED TOOLING - 40MM BORE, BEVELS, BULL NOSE, STRAIGHTS. 12 PCES....

Hammer Price: 🔒

1 2 3 Next >>

Disclaimer: BidSeek aggregates publicly available auction and liquidation results from independent third-party sources for research and valuation reference only. BidSeek is not affiliated with, endorsed by, sponsored by, or operated in connection with any auction house, marketplace, or liquidation firm. All data and images are provided as-is for informational purposes and remain the property of their respective owners.

Recent Searches

Login

Reset Password

Woodworking Equipment Commercial and Industrial

Save to Project Folder

Print Options

Save to Project Folder