Monthly SIGMA Showroom Floor MultiIndustry Auction
Category: PACKAGING EQUIPMENT
Total Lots:
298
Total Sales:
🔒 Subscribe
Lot Price Distribution
| Year | Make | Model | Lot Description | Hammer Price | |
|---|---|---|---|---|---|
|
COBALT | 100 SERIES |
COBALT 100 SERIES SEMI AUTOMATIC CASE FORMER: USED TO SQUARE AND TAPE MANUALLY OPENED BLANKS TO EITHER BE LOADED WHILE IN PLACE OR SENT DOWN THE LINE. OUTPUT: UP TO 15 CASES PER MINUTE DEPENDING ON APPLICATION AND USER DEXTERITY. CASE DIMENSIONS: LENGTH: 7-24 INCHES, WIDTH: 7-19 INCHES, MINIMUM HEIGHT: 6 INCHES. HAND ADJUSTMENTS. SLIDING TAPE HEAD: 2 INCHES WIDE. BUTTON TO MOVE THE CASE OUT OF THE ERECTING AREA ONCE COMPLETED OR DONE LOADING. CASTERS. ELECTRICAL: VOLTS: 115, FREQUENCY: 60HZ, PHASE 1, AMPS: 15. AIR REQUIREMENTS: 80 PSI. STAINLESS STEEL CONSTRUCTION.
|
🔒 Subscribe | |
|
|
COBALT | 100 SERIES |
COBALT 100 SERIES SEMI AUTOMATIC CASE FORMER: USED TO SQUARE AND TAPE MANUALLY OPENED BLANKS TO EITHER BE LOADED WHILE IN PLACE OR SENT DOWN THE LINE. OUTPUT: UP TO 15 CASES PER MINUTE DEPENDING ON APPLICATION AND USER DEXTERITY. CASE DIMENSIONS: LENGTH: 7-24 INCHES, WIDTH: 7-19 INCHES, MINIMUM HEIGHT: 6 INCHES. HAND ADJUSTMENTS. SLIDING TAPE HEAD: 2 INCHES WIDE. BUTTON TO MOVE THE CASE OUT OF THE ERECTING AREA ONCE COMPLETED OR DONE LOADING. CASTERS. ELECTRICAL: VOLTS: 115, FREQUENCY: 60HZ, PHASE: 1, AMPS: 15. AIR REQUIREMENTS: 80 PSI. STAINLESS STEEL CONSTRUCTION.
|
🔒 Subscribe | |
|
|
COBALT | 100 SERIES |
COBALT 100 SERIES SEMI AUTOMATIC CASE FORMER: USED TO SQUARE AND TAPE MANUALLY OPENED BLANKS TO EITHER BE LOADED WHILE IN PLACE OR SENT DOWN THE LINE. OUTPUT: UP TO 15 CASES PER MINUTE DEPENDING ON APPLICATION AND USER DEXTERITY. CASE DIMENSIONS: LENGTH: 7-24 INCHES, WIDTH: 7-19 INCHES, MINIMUM HEIGHT: 6 INCHES. HAND ADJUSTMENTS. SLIDING TAPE HEAD: 2 INCHES WIDE. BUTTON TO MOVE THE CASE OUT OF THE ERECTING AREA ONCE COMPLETED OR DONE LOADING. CASTERS. ELECTRICAL: VOLTS: 115, FREQUENCY: 60HZ, PHASE: 1, AMPS: 15. AIR REQUIREMENTS: 80 PSI. STAINLESS STEEL CONSTRUCTION.
|
🔒 Subscribe | |
|
|
COBALT | 100 SERIES |
COBALT 100 SERIES SEMI AUTOMATIC CASE FORMER: USED TO SQUARE AND TAPE MANUALLY OPENED BLANKS TO EITHER BE LOADED WHILE IN PLACE OR SENT DOWN THE LINE. OUTPUT: UP TO 15 CASES PER MINUTE DEPENDING ON APPLICATION AND USER DEXTERITY. CASE DIMENSIONS: LENGTH: 7-24 INCHES, WIDTH: 7-19 INCHES, MINIMUM HEIGHT: 6 INCHES. HAND ADJUSTMENTS. SLIDING TAPE HEAD: 2 INCHES WIDE. BUTTON TO MOVE THE CASE OUT OF THE ERECTING AREA ONCE COMPLETED OR DONE LOADING. CASTERS. ELECTRICAL: VOLTS: 115, FREQUENCY: 60HZ, PHASE 1, AMPS: 15. AIR REQUIREMENTS: 80 PSI. STAINLESS STEEL CONSTRUCTION.
|
🔒 Subscribe | |
|
|
COBALT | 100 SERIES |
COBALT 100 SERIES SEMI AUTOMATIC CASE FORMER: NEEDS SOME WORK DONE TO AIR LINES. USED TO SQUARE AND TAPE MANUALLY OPENED BLANKS TO EITHER BE LOADED WHILE IN PLACE OR SENT DOWN THE LINE. OUTPUT: UP TO 15 CASES PER MINUTE DEPENDING ON APPLICATION AND USER DEXTERITY. CASE DIMENSIONS: LENGTH: 7-24 INCHES WIDTH: 7-19 INCHES MINIMUM HEIGHT: 6 INCHES. HAND ADJUSTMENTS. SLIDING TAPE HEAD: 2 INCHES WIDE. BUTTON TO MOVE THE CASE OUT OF THE ERECTING AREA ONCE COMPLETED OR DONE LOADING. CASTERS. ELECTRICAL: VOLTS: 115 FREQUENCY: 60HZ PHASE 1 AMPS: 15. AIR REQUIREMENTS: 80 PSI. STAINLESS STEEL CONSTRUCTION.
|
🔒 Subscribe | |
|
|
COBALT | 100 SERIES |
COBALT 100 SERIES SEMI AUTOMATIC CASE FORMER: USED TO SQUARE AND TAPE MANUALLY OPENED BLANKS TO EITHER BE LOADED WHILE IN PLACE OR SENT DOWN THE LINE. OUTPUT: UP TO 15 CASES PER MINUTE DEPENDING ON APPLICATION AND USER DEXTERITY. CASE DIMENSIONS: LENGTH: 7-24 INCHES, WIDTH: 7-19 INCHES, MINIMUM HEIGHT: 6 INCHES. HAND ADJUSTMENTS. SLIDING TAPE HEAD: 2 INCHES WIDE. BUTTON TO MOVE THE CASE OUT OF THE ERECTING AREA ONCE COMPLETED OR DONE LOADING. CASTERS. ELECTRICAL: VOLTS: 115, FREQUENCY: 60HZ, PHASE 1, AMPS: 15. AIR REQUIREMENTS: 80 PSI. STAINLESS STEEL CONSTRUCTION.
|
🔒 Subscribe | |
|
|
COBALT | 100 SERIES |
COBALT 100 SERIES SEMI AUTOMATIC CASE FORMER: USED TO SQUARE AND TAPE MANUALLY OPENED BLANKS TO EITHER BE LOADED WHILE IN PLACE OR SENT DOWN THE LINE. OUTPUT: UP TO 15 CASES PER MINUTE DEPENDING ON APPLICATION AND USER DEXTERITY. CASE DIMENSIONS: LENGTH: 7-24 INCHES, WIDTH: 7-19 INCHES, MINIMUM HEIGHT: 6 INCHES. HAND ADJUSTMENTS. SLIDING TAPE HEAD: 2 INCHES WIDE. BUTTON TO MOVE THE CASE OUT OF THE ERECTING AREA ONCE COMPLETED OR DONE LOADING. CASTERS. ELECTRICAL: VOLTS: 115, FREQUENCY: 60HZ, PHASE: 1, AMPS: 15. AIR REQUIREMENTS: 80 PSI. STAINLESS STEEL CONSTRUCTION.
|
🔒 Subscribe | |
|
|
2015 | ADVANTAGE | BC-5A-NA |
2015 ADVANTAGE BC-5A-NA 5 TON CHILLER - USED CHILLER WITH: CAPACITY: 30,283 BTU PER HOUR AT 25 F RESERVOIR CAPACITY: 60 GALLONS PROCESS INLET: 1.25 INCHES PROCESS OUTLET: 1.25 INCHES AIR COOLED REFRIGERANT TYPE: 410A PROCESS PUMP: THROUGHPUT: 12 GALLONS PER MINUTE AIR REQUIREMENTS: 52 PSI MOTOR: 2 HORSEPOWER STAINLESS STEEL CONSTRUCTION COMPRESSOR MOTOR: 5 HORSEPOWER ELECTRICAL: 230 VOLTS, 60 HZ, PHASE 1
|
🔒 Subscribe |
|
|
ABB | FLEX PICKER |
ABB FLEX PICKER PICK AND PLACE ROBOT - USED ABB FLEX PICKER WITH: PICK CAPABILITIES: UP TO 150 PICKS PER MINUTE, DEPENDING ON APPLICATION MAXIMUM SPEED: 10 METERS PER SECOND (6) UP WORKING DIAMETER: 1130 MILLIMETERS UNLIMITED ROTATION CAPABILITIES REACH: 1500 MILLIMETERS APPLICATIONS: MEAT PROCESSING PACKAGING APPROXIMATE OVERALL DIMENSIONS: LENGTH: 5 FEET WIDTH: 6 FEET HEIGHT: 88 INCHES ELECTRICAL REQUIREMENTS: 400 VOLTS, 60 HERTZ, 3 PHASE
|
🔒 Subscribe | |
|
|
2015 | KENT | GW |
2015 KENT GW STAINLESS STEEL JACKETED BRITE TANK - USED GW KENT TANK WITH: CAPACITY: 20 BBL PRESURE RATING: 15 PSI ELLIPTICAL MANWAY: WIDTH: 17 INCHES HEIGHT: 14 INCHES VARIOUS 2 INCH INLETS AND OUTLETS CONICAL BOTTOM WITH 90 FLANGED DISCHARGE STAINLESS STEEL CONSTRUCTION MOUNDED ON (4) LEGS
|
🔒 Subscribe |
|
|
2019 | STEINCRAFT | BBTD-30 |
2019 STEINCRAFT BBTD-30 30 BBL STAINLESS STEEL JACKETED BRITE TANK. CAPACITY: 30 BBL. PRESURE RATING: 2 BAR / 29 PSI. ELLIPTICAL MANWAY: WIDTH: 17 INCHES HEIGHT: 14 INCHES. VARIOUS 2 INCH INLETS AND OUTLETS. CONICAL BOTTOM WITH 90 FLANGED DISCHARGE. STAINLESS STEEL CONSTRUCTION. MOUNDED ON (4) LEGS.
|
🔒 Subscribe |
|
|
ABB | FLEX PICKER |
ABB FLEX PICKER ROBOTIC PICK AND PLACE CASE PACKER. PICK CAPABILITIES: UP TO 150 PICKS PER MINUTE, DEPENDING ON APPLICATION. MAXIMUM SPEED: 10 METERS PER SECOND. WORKING DIAMETER: 1130 MILLIMETERS. UNLIMITED ROTATION CAPABILITIES. REACH: 1500 MILLIMETERS. APPLICATIONS: MEAT PROCESSING, PACKAGING. APPROXIMATE OVERALL DIMENSIONS: LENGTH: 5 FEET, WIDTH: 6 FEET, HEIGHT: 88 INCHES. ELECTRICAL REQUIREMENTS: 400 VOLTS, 60 HERTZ, 3 PHASE.
|
🔒 Subscribe | |
|
|
2018 | JORESTECH | SEMI-AUTOMATIC HEAT SHRINK TUNNEL |
2018 JORESTECH SEMI-AUTOMATIC HEAT SHRINK TUNNEL - USED HEAT SHRINK TUNNEL WITH: THROUGHPUT: UP TO 200 CONTAINERS PER MINUTE DEPENDING ON PRODUCT AND OPERATION SPEED MAXIMUM PRODUCT DIMENSIONS: DIAMETER: 4.5 INCHES HEIGHT: 11.5 INCHES CONVEYOR SPEED: UP TO 39 FEET PER MINUTE APERTURE DIMENSIONS: WIDTH: 5.75 INCHES HEIGHT: 12.5 INCHES HEAT ZONE LENGTH: 57 INCHES ROLLER DIMENSIONS: WIDTH: APPROXIMATELY 7 INCHES CENTERS: 0.59 INCHES INFEED/DISCHARGE HEIGHT: 33 INCHES FLOW: RIGHT TO LEFT POWER TYPE: HEATED AIR VARIABLE SPEED DRIVE PAINTED STEEL CONSTRUCTION THREADED LEVELER LEGS DUAL TOP-MOUNTED CONVECTION MOTORS: 1 HORSEPOWER ELECTRICAL: 220 VOLTS, 60 HZ, PHASE 3
|
🔒 Subscribe |
|
|
WAUKESHA | 018 S.S. |
WAUKESHA 018 S.S. VACUUM PUMP - USED PUMP WITH: PORT SIZE: 1.5 INCHES NOMINAL CAPACITY: UP TP 17 GALLONS PER MINUTE MAXIMUM PRESSURE: 200 PSI MAXIMUM ROTATIONS PER MINUTE: 600 316 STAINLESS STEEL CONSTRUCTION
|
🔒 Subscribe | |
|
|
WAUKESHA | 015 S.S. |
WAUKESHA 015 S.S. VACUUM PUMP - USED PUMP WITH: PORT SIZE: 1.5 INCHES NOMINAL CAPACITY: 9 GALLONS PER MINUTE MAXIMUM PRESSURE: 200 PSI MAXIMUM ROTATIONS PER MINUTE: 700 MOTOR 1 HORSEPOWER 316 STAINLESS STEEL CONSTRUCTION
|
🔒 Subscribe | |
|
|
VIDEOJET | 3320 |
VIDEOJET 3320 LASER MARKING SYSTEM - USED VIDEOJET LASER MARKING SYSTEM WITH: MARKING SPEED: UP TO 1,300 CHARACTERS PER SECOND LINE SPEED: UP TO 49 FEET PER SECOND MARKING FIELD: LENGTH: 1.7 INCHES WIDTH: 1.7 INCHES MOVING PRODUCTS: MAXIMUM HEIGHT: 7 INCHES AIR-COOLED COOLING SYSTEM TEMPERATURE RANGE: MAXIMUM: 105F MINIMUM: 40F ELECTRICAL REQUIREMENTS: 100-240 VOLTS, 1 PHASE, 50/60 HERTZ
|
🔒 Subscribe | |
|
|
LETINA |
LETINA TANK WITH: APPROXIMATE CAPACITY: 525 GALLONS (2000 LITERS) MAXIMUM ALLOWED WORKING PRESSURE: 2.5 BAR (2) MANWAY OPENINGS: TOP: 12 INCHES SIDE: 16 INCHES (2) SIDE INLETS: 1.5 INCHES (2) DISCHARGE OUTLETS: SIDE DISCHARGE: 2 INCHES OFFSET BOTTOM DISCHARGE: 2 INCHES DISCHARGE HEIGHT FROM GROUND: 5 INCHES DISHED TOP AND BOTTOM MOUNTED ON (4) STAINLESS STEEL LEGS RIGGING HOOKS
|
🔒 Subscribe | ||
|
|
WATER TANK: BOTTOM DISCHARGE INSIDE DIAMETER: 2 INCHES TOP INLET INSIDE DIAMETER: 4 INCHES HEIGHT: 48 INCHES WIDTH: 15 INCHES
|
🔒 Subscribe | |||
|
|
DUAL CHAMBER VACUUM BAG SEALER - USED VACUUM BAG SEALER WITH: SEAL DIMENSIONS: LENGTH: 34 INCHES WIDTH: 34 INCHES MISSING VACUUM PUMP
|
🔒 Subscribe | |||
|
|
(2) 0.5 HORSEPOWER MOTORS TRIMMING EQUIPMENT POWER PACK
|
🔒 Subscribe | |||
|
|
VEMAG |
VEMAG STAINLESS STEEL SMOKE GENERATOR - USED VEMAG SMOKE GENERATOR WITH: AGITATED HOPPER 32 INCH WIDTH 35 INCH DEPTH STAINLESS STEEL CONSTRUCTION
|
🔒 Subscribe | ||
|
|
VIDEOJET | 37E |
VIDEOJET 37E SMALL CHARACTER INK JET CODER - USED VIDEOJET 37E INK JET CODER WITH: PRINT RATE: UP TO 837 CHARACTERS PER SECOND CHARACTER HEIGHT: .11 TO .24 INCHES PRINT HEAD: COMPACT DIMENSIONS: 6.5 INCHES LONG X 1.5 INCH DIAMETER LINE SPEED CAPABILITY: 5 X 7 MATRIX, SINGLE LINE: 300 FEET PER MINUTE 5 X 7 MATRIX, TWIN LINE: 209 FEET PER MINUTE 7 X 9 MATRIX, SINGLE LINE: 223 FEET PER MINUTE VOLTAGE100-240 ELECTRICAL PHASE1PH HERTZ60HZ AMPERAGE1
|
🔒 Subscribe | |
|
|
AIDLIN | DUAL LANE ORIENTER |
AIDLIN DUAL LANE ORIENTER - USED AIDLIN ORIENTER WITH: DUAL LANE FINGER ORIENTATION CAP SIZE: 4 INCH WIDE X 1 INCH HIGH PUSH BUTTON START/STOP SWITCHES MOUNTED ON MILD STEEL FRAME
|
🔒 Subscribe | |
|
|
VIDEOJET | 37E |
VIDEOJET 37E SMALL CHARACTER INK JET CODER - USED BLUE BELT CONVEYOR: CONVEYOR DIMENSIONS: LENGTH: 120 INCHES WIDTH: 14 INCHES GUIDE RAIL HEIGHT: 4.5 INCHES 0.75 HORSEPOWER CENTER DRIVE MOTOR ELECTRICAL: VOLTS: 230/460 FREQUENCY: 60 HZ PHASE 3 STAINLESS STEEL FRAME
|
🔒 Subscribe | |
|
|
CLEATED INCLINE CONVEYOR WITH SS PRODUCT HOPPER - USED CONVEYOR WITH: INPUT HEIGHT: 73 INCHES CLEATED BELT: CLEAT CENTERS: 14 INCHES CLEAT HEIGHT: 1 INCH BELT WIDTH: 18 INCHES DISCHARGE HEIGHT: 63 INCHES PRODUCT HOPPER: STAINLESS STEEL WIDTH: 23 INCHES REAR DISCHARGE GATE WASHDOWN CAPABLE STAINLESS STEEL FRAME MOUNTED ON LEVELING FEET
|
🔒 Subscribe | |||
|
|
VIDEOJET | 37E |
VIDEOJET 37E INKJET CODER - USED VIDEO INKJET 37E INKJET PRINTER WITH: PRINT CAPABILITIES: UP TO 248 CHARACTERS PER SECOND 20 CHARACTER DISPLAY STAINLESS STEEL CABINET CORROSION RESISTANT CABINET STAINLESS STEEL PRINTHEAD SMALL FOOTPRINT QUALITY CODE RESOLUTION
|
🔒 Subscribe | |
|
|
MOJONNIER |
MOJONNIER STORAGE TANK: SKID MOUNTED STORAGE TANK: LENGTH: 46 INCHES DIAMETER: 18 INCHES MAGNETIC FLOAT SWITCH
|
🔒 Subscribe | ||
|
|
CLEATED INCLINE CONVEYOR WITH SS PRODUCT HOPPER - USED CONVEYOR WITH: INPUT HEIGHT: 73 INCHES CLEATED BELT: CLEAT CENTERS: 14 INCHES CLEAT HEIGHT: 1 INCH BELT WIDTH: 18 INCHES DISCHARGE HEIGHT: 63 INCHES PRODUCT HOPPER: STAINLESS STEEL WIDTH: 23 INCHES REAR DISCHARGE GATE WASHDOWN CAPABLE STAINLESS STEEL FRAME MOUNTED ON LEVELING FEET
|
🔒 Subscribe | |||
|
|
CAPMATIC | TECHNIC 2 DX |
CAPMATIC TECHNIC 2 DX LABELER
|
🔒 Subscribe | |
|
|
CAPMATIC | TECHNIC 2 SX |
CAPMATIC TECHNIC 2 SX LABELER
|
🔒 Subscribe | |
|
|
INTEGRITY MACHINE SERVICES |
INTEGRITY MACHINE SERVICES FIVE HEAD FOIL SEALER - USED INTEGRITY MACHINE FOIL SEALER WITH: 5 HEAD FOIL APPLICATION UP TO 90 TABS PER MINUTE DEPENDING ON PRODUCT TAB SIZE: 38 MILLIMETER INCLUDES PRODUCT CONVEYOR 4.5 INCH WIDTH 58 INCH LENGTH 42 INCH INFEED/DISCHARGE HEIGHT ELECTRICAL: 240 VOLTS, 60 HZ, PHASE 1
|
🔒 Subscribe | ||
|
|
TAYLOR MANUFACTURING | 96X60 |
TAYLOR MANUFACTURING 96X60 MASS FLOW ACCUMULATION TABLE - USED ACCUMULATION TABLE WITH: STEEL MESH CONVEYOR INFEED HEIGHT: 43 INCHES CONVEYOR DIMENSIONS: 96 INCHES WIDE X 60 INCHES LONG MOTOR: HORSEPOWER: 37 RPM: 1750 ELECTRICAL: VOLTS: 600 FREQUENCY: 60 HZ PHASE 3
|
🔒 Subscribe | |
|
|
2008 | PEARSON | BE60 |
2008 PEARSON BE60 6-PACK BEVERAGE CARRIER ERECTOR WITH TWIN LANE CONVEYOR. OUTPUT RATE: UP TO 60 CASES PER MINUTE, DEPENDING ON SIZE. CHAIN DRIVEN BELT. OUTFEED DIMENSIONS: HEIGHT: 43.5 INCHES, WIDTH: 10.5 INCHES. RELIABLY SETS UP: 4 & 6 PACK CANADIAN STYLE DOMESTIC, 4 & 6 PACK US STYLE EXPORT CARRIERS. MAGAZINE LENGTH: 80 INCHES. ELECTRICS: VOLTS: 460, HERTZ: 60, PHASE: 3.
|
🔒 Subscribe |
|
|
PEARSON | MP35 |
PEARSON MP35 MULTI-PACKER WITH: OUTPUT: UP TO 30 CASES PER MINUTE IN-LINE INFEED: (6) 4 PACK CARRIER BASKETS (4) 6 PACK CARRIER BASKETS (3) 8 PACK CARRIER BASKETS CROSS FLOW INFEED: (4) 6 PACK CARRIER BASKETS CARRIER SIZES: LENGTH: 6.75-11.75 INCHES WIDTH: 4.75-5.5 INCHES DEPTH: 2.5-5.75 INCHES CASE SIZES: LENGTH: 10-21 INCHES WIDTH: 10-17 INCHES HEIGHT: 4-10 INCHES DUAL LANE BRUSH DRIVE INFEED: LENGTH: 140 INCHES WIDTH: 7.5 INCHES EACH LANE CASE INFEED: LENGTH: 73 INCHES WIDTH: 10 INCHES 90 DEGREE CASE DISCHARGE: LENGTH: 74 INCHES WIDTH: 10 INCHES PRODUCT RAM CASE STOP ALLEN BRADLEY HMI AIR REQUIREMENTS: 80 PSI ELECTRICAL REQUIREMENTS: 460 VOLT, 60 HZ, 3 PH
|
🔒 Subscribe | |
|
|
HYDROTHERM | VGA-175BS-V |
HYDROTHERM VGA-175BS-V BOILER AND WATER HEATER SYSTEM - USED HYDROTHERM HOT WATER HEATER WITH:: LOW PRESSURE BOILER HEATING CAPACITY: 142000 BTU PER HOUR NATURAL GAS FUEL TYPE MCDONNELL GENERAL PURPOSE VALVE 2 AND 3/8 INCH THREADED OUTLET HONEYWELL PSI GUAGE
|
🔒 Subscribe | |
|
|
CHAIN DRIVEN ROLLER CONVEYOR - USED CHAIN DRIVEN ROLLER CONVEYOR WITH: DISCHARGE HEIGHT: 10 INCHES WITHOUT LEGS ROLLER WIDTH: 51.5 INCHES ROLLER CENTER LENGTH: 4.5 INCHES ROLLER DIAMETER: 2.5 INCHES OVERALL DIMENSIONS: LENGTH: 60 INCHES WIDTH: 63 INCHES HEIGHT: 10 INCHES NO MOTOR
|
🔒 Subscribe | |||
|
|
CASE BELT CONVEYOR - USED CASE BELT CONVEYOR WITH: DISCHARGE HEIGHT: 31 INCHES BELT WIDTH: 36 INCHES ADJUSTABLE LEG HEIGHT OVERALL DIMENSIONS: LENGTH: 54 INCHES WIDTH: 53.75 INCHES HEIGHT: 31 INCHES MOTOR: .75 HORSEPOWER, 1725 RPM ELECTRICAL: 208-230/460 VOLTS, 60 HZ, 3.2-3/1.5 AMPS, PHASE 3
|
🔒 Subscribe | |||
|
|
AUTOMATIC 40" X 40" PALLET DISPENSER |
AUTOMATIC 40" X 40" PALLET DISPENSER - USED PALLET DISPENSER WITH: MAXIMUM PALLET DIMENSIONS: LENGTH: 40 INCHES WIDTH: 40 INCHES OVERALL DIMENSIONS: LENGTH: 125 INCHES WIDTH: 66.5 INCHES HEIGHT: 144 INCHES MOTOR: 1 HORSEPOWER, 2825/3450 RPM ELECTRICAL: 190/380-415//208-230/460 VOLTS, 50/60 HZ, PHASE 3
|
🔒 Subscribe | ||
|
|
CHAIN DRIVEN ROLLER CONVEYOR - USED CHAIN DRIVEN ROLLER CONVEYOR WITH: DISCHARGE HEIGHT: 20 INCHES ROLLER WIDTH: 51.5 INCHES ROLLER DIAMETER: 2.5 INCHES ROLLER CENTER LENGTH: 6 INCHES ADJUSTABLE LEG HEIGHT OVERALL DIMENSIONS: LENGTH: 60 INCHES WIDTH: 63 INCHES HEIGHT: 29.5 INCHES MOTOR: .75 HORSEPOWER, 1725 RPM ELECTRICAL: 208-230/460 VOLTS, 60 HZ, 3.2-3/1.5 AMPS, PHASE 3
|
🔒 Subscribe | |||
|
|
TOR REY | ST305SH |
TOR REY ST305SH BANDSAW WITH: BLADE SPEED: UP TO 32 METERS PER SECOND SAW LENGTH: 120 INCHES THROAT DIMENSIONS: WIDTH: 13.7 INCHES HEIGHT: 17.7 INCHES WASTE TRAY MOVABLE BLADE GUARD LEVELING FEET ELECTRICAL: 220 VOLTS, 50/60 HZ, PHASE 3
|
🔒 Subscribe | |
|
|
MTC | H-LE-S3 |
MTC H-LE-S3 COMBO DUMP AND PALLET SEPARATOR WITH: WEIGHT CAPACITY: 3000 POUNDS OVERALL DIMENSIONS: LENGTH: 50 INCHES WIDTH: 50 INCHES HEIGHT: 104 INCHES
|
🔒 Subscribe | |
|
|
TALON | SUPRA |
TALON SUPRA MICROWAVE POPCORN BAG SEALER WITH: SPEED UP TO 90 BAGS PER MINUTE STAINLESS STEEL CONSTRUCTION ELECTRICAL REQUIREMENTS: 460 VOLTS, 60 HERTZ, 3 PHASE
|
🔒 Subscribe | |
|
|
ULMA | FLOW VAC |
ULMA FLOW VAC WITH: SPEED: UP TO 60 PACKAGES PER MINUTE DEPENDING ON PRODUCT FILM WIDTH CAPACITY: 900 MILLIMETERS MINIMUM PRODUCT SIZE: LENGTH: 80 MILLIMETERS WIDTH: 360 MILLIMETERS HEIGHT: 5 MILLIMETERS MAXIMUM PRODUCT SIZE: LENGTH: INFINITE WIDTH: 360 MILLIMETERS HEIGHT: 175 MILLIMETERS OVERALL DIMENSIONS: LENGTH: 168 INCHES WIDTH: 72 INCHES HEIGHT: 60 INCHES AIR REQUIREMENTS: 200 LITERS PER MINUTE / 6 BAR ELECTRICAL: 230 VOLTS, 60 HZ, PHASE 3
|
🔒 Subscribe | |
|
|
DYNARIC |
DYNARIC STRIPPER WITH: SEALING METHOD: HEAT SEAL INTERNAL STRAP DISPENSER STRAP WIDTH: 3/8 INCH 1/2 INCH TABLE HEIGHT: 31 INCHES MOUNTED ON CASTERS OVERALL DIMENSIONS: LENGTH: 48 INCHES WIDTH: 36 INCHES HEIGHT: 60 INCHES ELECTRICAL: 115 VOLTS, 8.0 AMPS
|
🔒 Subscribe | ||
|
|
DAX | P600 |
DAX P600 COLOR RIBBON HOT PRINTER MACHINE WITH: SPEED: 10-100 TIMES PER MINUTE PRINTING AREA: SINGLE LINE MAXIMUM LENGTH: 4 MILLIMETERS WIDTH: 35 MILLIMETERS DOUBLE LINE MAXIMUM: LENGTH: 8 MILLIMETERS WIDTH: 35 MILLIMETERS ELECTRICAL REQUIREMENTS: 110 VOLTS, 60 HERTZ OVERALL DIMENSIONS: LENGTH: 255 MILLIMETERS WIDTH: 225 MILLIMETERS HEIGHT: 315 MILLIMETERS
|
🔒 Subscribe | |
|
|
CRYOVAC | ST101 |
CRYOVAC ST101 SHRINK TUNNEL - USED CRYOVAC STEAM SHRINK TUNNEL WITH: PRODUCTION RATE: UP TO 60 PRODUCTS PER MINUTE APERTURE DIMENSIONS: WIDTH: 24 INCHES HEIGHT: 12 INCHES OVERALL DIMENSIONS: LENGTH: 48 INCHES WIDTH: 96 INCHES HEIGHT: 72 INCHES
|
🔒 Subscribe | |
|
|
2-DRAWER CABINETS - 58 END LEG UNITS 34 INLINE LEGS 36 CHAIRS 27 WALL END CAPS 22 DIVIDER PANES 53X23.5 38 DESK TOPS 60X24 63 WALL UNIT 36X31 38 WALL UNIT 24X31 38 WALL SECTION CONNECTOR - 65
|
🔒 Subscribe | |||
|
|
LAUDENBERG | FBM54 |
LAUDENBERG FBM54 STAINLESS STEEL LIQUID HORIZONTAL FFS WITH: OUTPUT: UP TO 480 POUCHES PER MINUTE DEPENDING ON APPLICATION POUCH DIMENSIONS: LENGTH: 3.15-13.87 INCHES WIDTH: 1.98-10 INCHES POUCH WEIGHT RANGE: 0.5 OUNCES TO 5 POUNDS BAG FORMING STATION WITH DOSER APPLICATOR INCLINE DOSER HOPPER: 72 LENGTH X 12 WIDTH (INCHES) ROTARY BAG FILLING STATION: TWO (2) HEAD DRIVING NOZZLES BOWL FEEDER: 18 INCHES NILFISK T26PLUS VAC SYSTEM NOVAKUST VACUUM SCRAP REMOVAL ON PUSH CART EIGHT (8) SETS OF CLAMPS ALFA LAVAL LKH10 CENTRIFUGAL PUMP CONTROL PANEL ALLEN-BRADLEY PANELVIEW 1000 TOUCHSCREEN PUSH BUTTON START/STOP ELECTRICALS: PHASE: 3 VOLTAGE: 480 FREQUENCY: 60 HERTZ STAINLESS STEEL CONSTRUCTION MODEL: FBM-54
|
🔒 Subscribe | |
|
|
STAHL'S HOTRONIX |
STAHL'S HOTRONIX THERMAL TRANSFER PRESS WITH: SEAL DIMENSIONS: LENGTH: 15 INCHES WIDTH: 11 INCHES LED DISPLAY PRESSURE ADJUSTMENT KNOB MANUAL SEAL ELECTRICAL REQUIREMENTS: 120 VOLTS, 50/60 HERTZ, 1 PHASE
|
🔒 Subscribe | ||
|
|
STAHL'S HOTRONIX |
STAHL'S HOTRONIX THERMAL TRANSFER PRESS WITH: SEAL DIMENSIONS: LENGTH: 15 INCHES WIDTH: 11 INCHES LED DISPLAY PRESSURE ADJUSTMENT KNOB MANUAL SEAL ELECTRICAL REQUIREMENTS: 120 VOLTS, 50/60 HERTZ, 1 PHASE
|
🔒 Subscribe |
COBALT 100 SERIES
PACKAGING EQUIPMENT
COBALT 100 SERIES SEMI AUTOMATIC CASE FORMER: USED TO SQUARE AND TAPE MANUALLY OPENED BLANKS TO EITH...
Hammer Price:
🔒
COBALT 100 SERIES
PACKAGING EQUIPMENT
COBALT 100 SERIES SEMI AUTOMATIC CASE FORMER: USED TO SQUARE AND TAPE MANUALLY OPENED BLANKS TO EITH...
Hammer Price:
🔒
COBALT 100 SERIES
PACKAGING EQUIPMENT
COBALT 100 SERIES SEMI AUTOMATIC CASE FORMER: USED TO SQUARE AND TAPE MANUALLY OPENED BLANKS TO EITH...
Hammer Price:
🔒
COBALT 100 SERIES
PACKAGING EQUIPMENT
COBALT 100 SERIES SEMI AUTOMATIC CASE FORMER: USED TO SQUARE AND TAPE MANUALLY OPENED BLANKS TO EITH...
Hammer Price:
🔒
COBALT 100 SERIES
PACKAGING EQUIPMENT
COBALT 100 SERIES SEMI AUTOMATIC CASE FORMER: NEEDS SOME WORK DONE TO AIR LINES. USED TO SQUARE AND ...
Hammer Price:
🔒
COBALT 100 SERIES
PACKAGING EQUIPMENT
COBALT 100 SERIES SEMI AUTOMATIC CASE FORMER: USED TO SQUARE AND TAPE MANUALLY OPENED BLANKS TO EITH...
Hammer Price:
🔒
COBALT 100 SERIES
PACKAGING EQUIPMENT
COBALT 100 SERIES SEMI AUTOMATIC CASE FORMER: USED TO SQUARE AND TAPE MANUALLY OPENED BLANKS TO EITH...
Hammer Price:
🔒
2015 ADVANTAGE BC-5A-NA
REFRIGERATION EQUIPMENT
2015 ADVANTAGE BC-5A-NA 5 TON CHILLER - USED CHILLER WITH: CAPACITY: 30,283 BTU PER HOUR AT 25 F RES...
Hammer Price:
🔒
ABB FLEX PICKER
INDUSTRIAL AUTOMATION, CONTROLS & ROBOTICS
ABB FLEX PICKER PICK AND PLACE ROBOT - USED ABB FLEX PICKER WITH: PICK CAPABILITIES: UP TO 150 PICKS...
Hammer Price:
🔒
2015 KENT GW
TANKS, PUMPS & STORAGE EQUIPMENT
2015 KENT GW STAINLESS STEEL JACKETED BRITE TANK - USED GW KENT TANK WITH: CAPACITY: 20 BBL PRESURE ...
Hammer Price:
🔒
2019 STEINCRAFT BBTD-30
TANKS, PUMPS & STORAGE EQUIPMENT
2019 STEINCRAFT BBTD-30 30 BBL STAINLESS STEEL JACKETED BRITE TANK. CAPACITY: 30 BBL. PRESURE RATING...
Hammer Price:
🔒
ABB FLEX PICKER
PACKAGING EQUIPMENT
ABB FLEX PICKER ROBOTIC PICK AND PLACE CASE PACKER. PICK CAPABILITIES: UP TO 150 PICKS PER MINUTE, D...
Hammer Price:
🔒
2018 JORESTECH SEMI-AUTOMATIC HEAT SHRINK TUNNEL
PACKAGING EQUIPMENT
2018 JORESTECH SEMI-AUTOMATIC HEAT SHRINK TUNNEL - USED HEAT SHRINK TUNNEL WITH: THROUGHPUT: UP TO 2...
Hammer Price:
🔒
WAUKESHA 018 S.S.
MISC
WAUKESHA 018 S.S. VACUUM PUMP - USED PUMP WITH: PORT SIZE: 1.5 INCHES NOMINAL CAPACITY: UP TP 17 GAL...
Hammer Price:
🔒
WAUKESHA 015 S.S.
TANKS, PUMPS & STORAGE EQUIPMENT
WAUKESHA 015 S.S. VACUUM PUMP - USED PUMP WITH: PORT SIZE: 1.5 INCHES NOMINAL CAPACITY: 9 GALLONS PE...
Hammer Price:
🔒
VIDEOJET 3320
LASER ETCHING & ENGRAVING EQUIPMENT
VIDEOJET 3320 LASER MARKING SYSTEM - USED VIDEOJET LASER MARKING SYSTEM WITH: MARKING SPEED: UP TO 1...
Hammer Price:
🔒
LETINA
TANKS, PUMPS & STORAGE EQUIPMENT
LETINA TANK WITH: APPROXIMATE CAPACITY: 525 GALLONS (2000 LITERS) MAXIMUM ALLOWED WORKING PRESSURE: ...
Hammer Price:
🔒
TANKS, PUMPS & STORAGE EQUIPMENT
WATER TANK: BOTTOM DISCHARGE INSIDE DIAMETER: 2 INCHES TOP INLET INSIDE DIAMETER: 4 INCHES HEIGHT: 4...
Hammer Price:
🔒
PACKAGING EQUIPMENT
DUAL CHAMBER VACUUM BAG SEALER - USED VACUUM BAG SEALER WITH: SEAL DIMENSIONS: LENGTH: 34 INCHES WID...
Hammer Price:
🔒
FOOD PROCESSING AND RESTAURANT EQUIPMENT
(2) 0.5 HORSEPOWER MOTORS TRIMMING EQUIPMENT POWER PACK...
Hammer Price:
🔒
VEMAG
MISC
VEMAG STAINLESS STEEL SMOKE GENERATOR - USED VEMAG SMOKE GENERATOR WITH: AGITATED HOPPER 32 INCH WID...
Hammer Price:
🔒
VIDEOJET 37E
COMMERCIAL PRINTING & BINDERY EQUIPMENT
VIDEOJET 37E SMALL CHARACTER INK JET CODER - USED VIDEOJET 37E INK JET CODER WITH: PRINT RATE: UP TO...
Hammer Price:
🔒
AIDLIN DUAL LANE ORIENTER
PACKAGING EQUIPMENT
AIDLIN DUAL LANE ORIENTER - USED AIDLIN ORIENTER WITH: DUAL LANE FINGER ORIENTATION CAP SIZE: 4 INCH...
Hammer Price:
🔒
VIDEOJET 37E
PACKAGING EQUIPMENT
VIDEOJET 37E SMALL CHARACTER INK JET CODER - USED BLUE BELT CONVEYOR: CONVEYOR DIMENSIONS: LENGTH: 1...
Hammer Price:
🔒
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
CLEATED INCLINE CONVEYOR WITH SS PRODUCT HOPPER - USED CONVEYOR WITH: INPUT HEIGHT: 73 INCHES CLEATE...
Hammer Price:
🔒
VIDEOJET 37E
COMMERCIAL PRINTING & BINDERY EQUIPMENT
VIDEOJET 37E INKJET CODER - USED VIDEO INKJET 37E INKJET PRINTER WITH: PRINT CAPABILITIES: UP TO 248...
Hammer Price:
🔒
MOJONNIER
TANKS, PUMPS & STORAGE EQUIPMENT
MOJONNIER STORAGE TANK: SKID MOUNTED STORAGE TANK: LENGTH: 46 INCHES DIAMETER: 18 INCHES MAGNETIC FL...
Hammer Price:
🔒
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
CLEATED INCLINE CONVEYOR WITH SS PRODUCT HOPPER - USED CONVEYOR WITH: INPUT HEIGHT: 73 INCHES CLEATE...
Hammer Price:
🔒
INTEGRITY MACHINE SERVICES
PACKAGING EQUIPMENT
INTEGRITY MACHINE SERVICES FIVE HEAD FOIL SEALER - USED INTEGRITY MACHINE FOIL SEALER WITH: 5 HEAD F...
Hammer Price:
🔒
TAYLOR MANUFACTURING 96X60
MISC
TAYLOR MANUFACTURING 96X60 MASS FLOW ACCUMULATION TABLE - USED ACCUMULATION TABLE WITH: STEEL MESH C...
Hammer Price:
🔒
2008 PEARSON BE60
PACKAGING EQUIPMENT
2008 PEARSON BE60 6-PACK BEVERAGE CARRIER ERECTOR WITH TWIN LANE CONVEYOR. OUTPUT RATE: UP TO 60 CAS...
Hammer Price:
🔒
PEARSON MP35
PACKAGING EQUIPMENT
PEARSON MP35 MULTI-PACKER WITH: OUTPUT: UP TO 30 CASES PER MINUTE IN-LINE INFEED: (6) 4 PACK CARRIER...
Hammer Price:
🔒
HYDROTHERM VGA-175BS-V
BOILERS
HYDROTHERM VGA-175BS-V BOILER AND WATER HEATER SYSTEM - USED HYDROTHERM HOT WATER HEATER WITH:: LOW ...
Hammer Price:
🔒
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
CHAIN DRIVEN ROLLER CONVEYOR - USED CHAIN DRIVEN ROLLER CONVEYOR WITH: DISCHARGE HEIGHT: 10 INCHES W...
Hammer Price:
🔒
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
CASE BELT CONVEYOR - USED CASE BELT CONVEYOR WITH: DISCHARGE HEIGHT: 31 INCHES BELT WIDTH: 36 INCHES...
Hammer Price:
🔒
AUTOMATIC 40" X 40" PALLET DISPENSER
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
AUTOMATIC 40" X 40" PALLET DISPENSER - USED PALLET DISPENSER WITH: MAXIMUM PALLET DIMENSIONS: LENGTH...
Hammer Price:
🔒
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
CHAIN DRIVEN ROLLER CONVEYOR - USED CHAIN DRIVEN ROLLER CONVEYOR WITH: DISCHARGE HEIGHT: 20 INCHES R...
Hammer Price:
🔒
TOR REY ST305SH
METALWORKING & FABRICATION EQUIPMENT
TOR REY ST305SH BANDSAW WITH: BLADE SPEED: UP TO 32 METERS PER SECOND SAW LENGTH: 120 INCHES THROAT ...
Hammer Price:
🔒
MTC H-LE-S3
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
MTC H-LE-S3 COMBO DUMP AND PALLET SEPARATOR WITH: WEIGHT CAPACITY: 3000 POUNDS OVERALL DIMENSIONS: L...
Hammer Price:
🔒
TALON SUPRA
PACKAGING EQUIPMENT
TALON SUPRA MICROWAVE POPCORN BAG SEALER WITH: SPEED UP TO 90 BAGS PER MINUTE STAINLESS STEEL CONSTR...
Hammer Price:
🔒
ULMA FLOW VAC
PACKAGING EQUIPMENT
ULMA FLOW VAC WITH: SPEED: UP TO 60 PACKAGES PER MINUTE DEPENDING ON PRODUCT FILM WIDTH CAPACITY: 90...
Hammer Price:
🔒
DYNARIC
PACKAGING EQUIPMENT
DYNARIC STRIPPER WITH: SEALING METHOD: HEAT SEAL INTERNAL STRAP DISPENSER STRAP WIDTH: 3/8 INCH 1/2 ...
Hammer Price:
🔒
DAX P600
COMMERCIAL PRINTING & BINDERY EQUIPMENT
DAX P600 COLOR RIBBON HOT PRINTER MACHINE WITH: SPEED: 10-100 TIMES PER MINUTE PRINTING AREA: SINGLE...
Hammer Price:
🔒
CRYOVAC ST101
PACKAGING EQUIPMENT
CRYOVAC ST101 SHRINK TUNNEL - USED CRYOVAC STEAM SHRINK TUNNEL WITH: PRODUCTION RATE: UP TO 60 PRODU...
Hammer Price:
🔒
MISC
2-DRAWER CABINETS - 58 END LEG UNITS 34 INLINE LEGS 36 CHAIRS 27 WALL END CAPS 22 DIVIDER PANES 53X2...
Hammer Price:
🔒
LAUDENBERG FBM54
PACKAGING EQUIPMENT
LAUDENBERG FBM54 STAINLESS STEEL LIQUID HORIZONTAL FFS WITH: OUTPUT: UP TO 480 POUCHES PER MINUTE DE...
Hammer Price:
🔒
STAHL'S HOTRONIX
PACKAGING EQUIPMENT
STAHL'S HOTRONIX THERMAL TRANSFER PRESS WITH: SEAL DIMENSIONS: LENGTH: 15 INCHES WIDTH: 11 INCHES LE...
Hammer Price:
🔒
STAHL'S HOTRONIX
PACKAGING EQUIPMENT
STAHL'S HOTRONIX THERMAL TRANSFER PRESS WITH: SEAL DIMENSIONS: LENGTH: 15 INCHES WIDTH: 11 INCHES LE...
Hammer Price:
🔒