Beverage Processing and Packaging Equipment Auction
Category: PACKAGING EQUIPMENT
Total Lots:
191
Total Sales:
🔒 Subscribe
Lot Price Distribution
| Year | Make | Model | Lot Description | Hammer Price | |
|---|---|---|---|---|---|
|
COLLOID MILL EMULSIFIER WITH VARI FREQ DRIVE, MOUNTED ON CART WITH CASTERS. MAX RPM: 3515 @ 440 VOLTS. FLANGED DISCHARGE PORT: 2.5 INCHES. OVERALL DIMENSIONS (INCHES): LENGTH: 57 WIDTH: 25 HEIGHT: 57. MARATHON ELECTRIC MOTOR: 0.33 HP. ELECTRICAL: 3 PHASE, 60 HERTZ, 480 VOLTS.
|
🔒 Subscribe | |||
|
|
EMKON AUTOMATION |
EMKON AUTOMATION STAINLESS STEEL SMOOTH TOP BELT INFEED CONVEYOR, CONVEYOR DIMENSIONS: LENGTH: 92 INCHES WIDTH: 39.25 INCHES INFEED/DISCHARGE HEIGHT: 40.5 INCHES DESIGNED FOR EMKON FLEXPICK SP SACHET PACKER OVERALL DIMENSIONS: LENGTH: 92 INCHES WIDTH: 56 INCHES HEIGHT: 62 INCHES STAINLESS STEEL CONSTRUCTION
|
🔒 Subscribe | ||
|
|
HYTROL | SMOOTH TOP CONVEYOR |
21' LONG X 20" WIDE SMOOTH TOP CONVEYOR, 32" WORKING HEIGHT FROM GROUND, 1/4 HORSEPOWER MOTOR, BOLT DOWN FEET, ADJUSTABLE HEIGHT, 240 VOLTS / 3 PHASE / 60 HERTZ
|
🔒 Subscribe | |
|
|
PILLAR | MK-20 |
20KW PILLAR MK-20 INDUCTION HEATER, POWER RANGE: 2.5 KW - 20 KW, FREQUENCY: 50 KHZ - 450 KHZ, MOFSET TRANSISTOR MODULES, 95% CONVERSION EFFICIENCY, SINGLE MAIN CONTROL BOARD, 95 DEGREE MAX INLET WATER TEMPERATURE, 30 PSI MINIMUM DIFFERENTIAL WATER PRESSURE, ELECTRICAL: 208 VOLTS, 3 PHASE, 50/60 HERTZ
|
🔒 Subscribe | |
|
|
SPX FLOW | 040 U2 |
SPX FLOW 040 U2 POSITIVE DISPLACEMENT PUMP, 3 HORSEPOWER, CAPACITY: UP TO 45 GALLONS PER MINUTE DEPENDING ON PRODUCT AND APPLICATION, DISPLACEMENT PER REVOLUTION: 0.076 GALLONS, MAXIMUM PRESSURE: 150 PSI
|
🔒 Subscribe | |
|
|
3M | 200A |
3M-MATIC MODEL 200A TOP AND BOTTOM TAPE CASE SEALER - USED 3M CASE TAPER WITH: THROUGHPUT: UP TO 40 CASES PER MINUTE, DEPENDING ON CASE SIZE AND APPLICATION MINIMUM CASE DIMENSIONS: LENGTH: 6 INCHES WIDTH: 6 INCHES HEIGHT: 4.75 INCHES MAXIMUM CASE DIMENSIONS: LENGTH: UNLIMITED WIDTH: 21.5 INCHES HEIGHT: 24.5 INCHES CASE WEIGHT RANGE: 5 - 85 POUNDS DRIVE BELT SPEED: UP TO 100 FEET PER MINUTE APPROXIMATE OVERALL DIMENSIONS: LENGTH: 36.5 INCHES WIDTH: 31 INCHES ADJUSTABLE HEIGHT: 53 - 90 INCHES ELECTRICAL: 1 PHASE, 60 HZ, 115 VOLTS
|
🔒 Subscribe | |
|
|
42 INCH DIAMETER STAINLESS STEEL DISC UNSCRAMBLING TABLE, 42 INCH DISCHARGE HEIGHT, 220 VOLTS S/N:
|
🔒 Subscribe | |||
|
|
42 INCH DIAMETER STAINLESS STEEL DISC UNSCRAMBLING TABLE, 42 INCH TABLE DIAMETER, 71 INCH LONG X 48 INCH WIDE SQUARE SECTION AREA, 42 INCH DISCHARGE HEIGHT FROM GROUND, 2 INCH TALL GUIDERAILS, CASTERS, VARIABLE SPEED CONTROLLER, 220 VOLTS
|
🔒 Subscribe | |||
|
|
42 INCH DIAMETER STAINLESS STEEL DISC UNSCRAMBLING TABLE, 42 INCH DIAMETER, 71 INCH LONG X 48 INCH WIDE SQUARE SECTION AREA, 42 INCH DISCHARGE HEIGHT FROM GROUND, 2 INCH TALL GUIDERAILS, CASTERS, VARIABLE SPEED CONTROLLER, 220 VOLTS
|
🔒 Subscribe | |||
|
|
42 INCH DIAMETER STAINLESS STEEL DISC UNSCRAMBLING TABLE, 42 INCH DIAMETER, 71 INCH LONG X 48 INCH WIDE SQUARE SECTION AREA, 42 INCH DISCHARGE HEIGHT FROM GROUND, 2 INCH TALL GUIDERAILS, CASTERS, VARIABLE SPEED CONTROLLER, 220 VOLTS
|
🔒 Subscribe | |||
|
|
SHANGHAI JINGYUAN | J-Y300 |
SHANGHAI JINGYUAN J-Y300 LASER INK JET CODER, TOUCH SCREEN HMI, ADJUSTABLE HEIGHT, MOUNTED ON CASTERS, LEVELER FEET, WORKING ENVIRONMENT: 30 C, LASER POWER: 30 WATTS, MACHINE POWER: 700 WATTS, ELECTRICAL: 50 HZ, 220 VOLTS
|
🔒 Subscribe | |
|
|
E PACK MACHINERY | CLEANER/BLOWER |
E PACK MACHINERY 12 HEAD INLINE AIR BOTTLE CLEANER BLOWER, HIGH-EFFICIENCY MACHINE DESIGNED TO CLEAN AND RINSE BOTTLES BEFORE FILLING. USING A POWERFUL AIR BLAST, IT REMOVES DUST, DEBRIS, AND RESIDUAL LIQUIDS FROM THE INTERIOR OF BOTTLES. ADJUSTABLE SETTINGS FOR VARIOUS BOTTLE SIZES AND TYPES. CAPABLE OF CLEANING GLASS, METAL, AND PLASTIC CONTAINERS UP TO 1 GALLON. IDEAL APPLICATIONS: BEVERAGES, FOOD PRODUCTS, PERSONAL CARE, AND CHEMICALS. OVER CONVEYOR SYSTEM, PHOTO SENSOR COUNTING SYSTEM, IONIZED AIR, 304 STAINLESS STEEL FRAME, AB MICRO 1200 PLC CONTROLLER, ADJUSTABLE HEIGHT. AIR REQUIREMENTS: 80-100 PSI. ELECTRICAL REQUIREMENTS: 240 VOLTS / 1 PHASE / 60 HERTZ. LAST CLEANING 8 OUNCE PET BOTTLES.
|
🔒 Subscribe | |
|
|
TOLKE | DSV1500 |
TOLKE DSV1500 ROTARY HIGH SPEED CAP SORTER UP TO 2000 CAPS PER MINUTE WITH SERVO CAP ORIENTER. ENSURES THE CAP IS CORRECTLY ORIENTED BEFORE GOING TO THE CAPPER. OUTPUT: UP TO 2000 CAPS PER MINUTE DEPENDING ON THE APPLICATION. BOWL DIAMETER: 52 INCHES. BELTED CAP INFEED SYSTEM. AIR BLOW REJECT SYSTEM FOR MISALIGNED CAPS. SERVO CAP ORIENTED FOR CAPS GOING THE WRONG DIRECTION IF THEY NEED TO BE PLACED ON A CERTAIN SIDE. ALLEN-BRADLEY CONTROLS. ELECTRICAL: VOLTS: 480, FREQUENCY: 60 HZ, PHASE 3. STAINLESS STEEL CONSTRUCTION. LAST RUNNING A PUSH TOP SOAP CAP 1.25"D X 1.25"H.
|
🔒 Subscribe | |
|
|
HARTNESS | 825 |
HARTNESS 825 AUTOMATIC STAINLESS STEEL DROP PACKER UP TO 35 CASES PER MINUTE. CASE SIZES (INCHES): LENGTH: 6 TO 24 WIDTH: 6 TO 16 HEIGHT: 1.5 TO 9. DELRIN PRODUCT INFEED CONVEYOR (INCHES): LENGTH:166 WIDTH: 6 NUMBER OF LANES: 3. HYTROL TAKEAWAY CONVEYOR (INCHES): LENGTH: 108 WIDTH: 10. OVERALL DIMENSIONS (INCHES): LENGTH: 195 WIDTH: 53 HEIGHT: 102. BOTTOM BOX CONVEYOR: 126 INCH LONG BOTTOM EMPTY CASE INFEED CONVEYOR WITH DESCENDING SOFT DROP PRODUCT ELEVATOR AND GRID INTO CASE. CONTROL PANEL WITH PUSH BUTTON CONTROLS AND E-STOP. ELECTRICAL REQUIREMENTS: 3 PHASE, 60 HERTZ, 480 VOLTS. LAST APPLICATION: RUNNING (12) ONE PINT CONTAINERS AT 15 CPM.
|
🔒 Subscribe | |
|
|
SWF | TF-600VK |
SWF TF600VK ONE PIECE VERTICAL GLUE SEAL TRAY FORMER, OUTPUT: UP TO 35 TRAYS PER MINUTE DEPENDING ON PRODUCT AND APPLICATION. MINIMUM TRAY DIMENSIONS: LENGTH: 10.5 INCHES HEIGHT: 12 INCHES. MAXIMUM TRAY DIMENSIONS: LENGTH: 49 INCHES HEIGHT: 43 INCHES. DIFFERENT TRAY SIZES WILL REQUIRE OEM CHANGE PARTS. TRAY STYLES: TWO-PIECE FULL TELESCOPE, LEAK-PROOF TRAY, ONE-PIECE TELESCOPE, DOUBLE CORNER TRAY, FLAP TRAY, TRIPLE END TRAY, SLOTTED TRAY: MINIMUM 1 INCH DEPTH, TRAY AND BLISS COMBINATION, FLAPS OUTSIDE, TRAY WITH FLAPS, SIX-CORNER TRAY, ECONO LID FULL TELESCOPE. VACUUM BLANK TRY PICK-OFF. PAINTED MILD STEEL CONSTRUCTION. AIR REQUIREMENTS: 90 PSI. LARGEST MOTOR: 1 HORSEPOWER. ELECTRICAL: VOLTS 220 FREQUENCY: 60 HZ PHASE 3.
|
🔒 Subscribe | |
|
|
SACMI | STEAM TUNNEL |
23 FEET LONG STEAM TUNNEL - USED SACMI STEAM TUNNEL WITH: PREVIOUSLY RUNNING 12 OUNCE TO 1 LITER PLASTIC BOTTLES NINE (9) VIEWING WINDOWS: 9.5 WIDTH X 13.5 HEIGHT (INCHES) APERTURE OPENING: 8 WIDTH X 25.5 HEIGHT (INCHES) ACTUAL WORKING APERTURE: 7 WIDTH X 15.75 HEIGHT (INCHES) CONVEYOR TRACK: 274 LENGTH X 7 WIDTH (INCHES) PRODUCT GUIDES INCLUDED ON CONVEYOR TRACK CONVEYOR HEIGHT FROM FLOOR: 46 INCHES DIAMETER OF EXHAUST VENT: 10.5 INCHES ANALOG CONTROLS WITH PUSH BUTTON RESETS AND INTERIOR LIGHTS ELECTRICALS: 480 VOLTAGE / 3 PHASE / 60 HERTZ
|
🔒 Subscribe | |
|
|
UNKNOWN |
119 GALLON WATER HEATER - USED WATER HEATER WITH: MAX PRESSURE: 150 PSI ELEMENTS: 6 OVERALL DIMENSIONS: LENGTH: 42 INCHES WIDTH: 40 INCHES HEIGHT: 78 INCHES ELECTRICALS: 480 VOLTS, 1/3 PHASE, 3,000 WATTS MODEL: UNKNOWN
|
🔒 Subscribe | ||
|
|
UNKNOWN |
119 GALLON WATER TANK - USED WATER HEATER WITH: MAX PRESSURE: 150 PSI ELEMENTS: 6 OVERALL DIMENSIONS: LENGTH: 42 INCHES WIDTH: 40 INCHES HEIGHT: 78 INCHES ELECTRICALS: 480 VOLTS, 1/3 PHASE, 3,000 WATTS
|
🔒 Subscribe | ||
|
|
MEHEEN | M6 |
MEHEEN M6 6-HEAD BOTTLE FILLER, ADVANCED HIGH-SPEED FILLING MACHINE FOR BEVERAGES, FEATURES SIX FILLING HEADS, PRECISE CONSISTENT FILLS, OUTPUT UP TO 36 BOTTLES PER MINUTE, BOTTLE DIAMETERS 1.5 TO 3 INCH, AUTO CLEANING, AUTO SANITIZING, BOTTLE GRABBER PLATE, PRESSURE MONITORS, FILLER ONLY MODE, ELECTRICAL REQUIREMENTS: 115 VOLTS, 50/60 HERTZ, AIR REQUIREMENTS: 15 CFM @ 90 PSI, APPROXIMATE OVERALL DIMENSIONS: 5.5' LONG X 3.5' WIDE
|
🔒 Subscribe | |
|
|
5 CUBIC FOOT CARBON STEEL RIBBON BLENDER WITH DRIVE MOTOR, MIXER RPM: 46, CHAMBER DIMENSIONS: LENGTH: 18 INCHES WIDTH: 32 INCHES DEPTH: 22 INCHES, OVERALL DIMENSIONS: LENGTH: 61 INCHES WIDTH: 29 INCHES HEIGHT: 44 INCHES, DISCHARGE: BOTTOM-CENTER DISCHARGE DIAMETER: FLANGED: 4.5 INCHES INSIDE DIAMETER: 3.5 INCHES, AGITATION: DUAL RIBBON SINGLE SHAFT MOUNTED ON FLANGED FEET, CONSTRUCTION: STAINLESS STEEL, MOTOR: 3 HP MOTOR ELECTRICAL: 230/460 V, 60 HZ, THREE PHASE
|
🔒 Subscribe | |||
|
|
HIGHLAND EQUIPMENT |
JACKETED STAINLESS STEEL TANK WITH: CAPACITY: ~172.2 GALLONS TANK DIAMETER: 37 INCHES MAX. PRESSURE: JACKET DESIGN: 55 PSIG @ 300F TEST PRESSURE: 94 PSIG HEATING METHOD: NATURAL GAS OVERALL DIMENSIONS: LENGTH: 40 WIDTH: 63 HEIGHT: 88 TWO TOP INLETS 1 PRODUCT INLET OUTSIDE DIAMETER: 4 INCHES INSIDE DIAMETER: 2 INCHES 1 CIP INLET OUTSIDE DIAMETER: 4 INCHES INSIDE DIAMTER: 3 INCHES DISCHARGE: CENTER BOTTOM FLANGED DIAMETER: 1.75 INCHES INSIDE DIAMETER: 1 INCH CIP COMPATIBLE MOUNTED ON PIPE STYLE BASE TOP-MOUNTED AGITATOR MOTOR DUAL-HINGED LID CASTER WHEELS INCLUDED AGITATION: DUAL SIDE SCRAPE AGITATOR MOTOR: 208-230/460 V, 60 HZ, THREE PHASE 1,750 RPM
|
🔒 Subscribe | ||
|
|
PRECISION STAINLESS | UNKNOWN |
200 GALLON STAINLESS STEEL JACKETED TANK WITH HIGH SHEAR MIXER. CAPACITY: 200 GALLONS. DIMPLED JACKET RATING: MAWP: 180 PSI @ 400 F, MAWV: 15 PSI @ 400 F, MDMT: -20 F @ 180 PSI. TOP MOUNTED HIGH SHEAR MIXER. TANK DIAMETER: 36 INCHES. STRAIGHT WALL HEIGHT: 52 INCHES. FLIP TOP COVERS. BOTTOM CENTER DISCHARGE DIAMETER: 2.5 INCHES. BOTTOM SIDE SANITARY OUTLET DIAMETER: 1.5 INCHES. DISCHARGE HEIGHT: 18 INCHES. SIDE TOP INLET: 1.5 INCHES. DISHED BOTTOM. OVERALL DIMENSIONS: WIDTH: 38.5 INCHES, DEPTH: 42 INCHES, HEIGHT: 101 INCHES. MOUNTED ON STAINLESS STEEL LEGS WITH LEVELING FEET. 14 GAUGE STAINLESS STEEL SHELL. 304L STAINLESS STEEL VESSEL. HIGH SHEAR MIXER DRIVE MOTOR: 3 HORSEPOWER, 3,470 RPM. ELECTRICAL: 3 PHASE, 60 HZ, 208-230/460 VOLTS.
|
🔒 Subscribe | |
|
|
DCI | SA240 |
240 GALLON DCI STAINLESS STEEL JACKETED TANK, 316 STAINLESS STEEL, VERTICAL, DOME TOP, DISH BOTTOM. TANK DIMENSIONS (INCHES): DIAMETER: 42, HEIGHT: 42. OVERALL DIMENSIONS (INCHES): LENGTH: 52, WIDTH: 52, HEIGHT: 84. MANWAY DIAMETER: 18 INCHES. INTERNAL JACKET RATING: 30 PSIG. INLETS (2): 2 INCHES. CENTER BOTTOM OUTLET: 2.5 INCHES. CIP INLETS WITH SPRAYBALL (2): 3 INCHES. SIGHT DETECTOR GAUGE. MOUNTED ON CASTERS AND A STAINLESS STEEL FRAME.
|
🔒 Subscribe | |
|
|
COMAT | STVS150.1 |
3995 GALLON STAINLESS STEEL SINGLE WALL TANK - USED COMAT STAINLESS STEEL TANK WITH: TANK CAPACITY: 3995 GALLONS TANK DIMENSIONS (INCHES): DIAMETER: 92 HEIGHT: 144 DISCHARGE DIMENSIONS (INCHES): FLANGED DIAMETER: 2.5 HEIGHT: 11 TOP INLET: 2 INCHES FLANGED MANWAY DIAMETER (INCHES): WIDTH: 18 HEIGHT: 12 OVERALL DIMENSIONS (INCHES): LENGTH: 94 WIDTH: 94 HEIGHT: 180 TOP MOUNTED MOTOR AGITATION PITCHED BOTTOM WITH CENTER DISCHARGE STEAM VENT STAINLESS STEEL CONSTRUCTION LAST APPLICATION: CHEESE MODEL: STVS150.1
|
🔒 Subscribe | |
|
|
DEUTSCHE BEVERAGE TECHNOLOGY | EMULSIFICATION TANK |
DEUTSCHE BEVERAGE TECHNOLOGY EMULSIFICATION TANK, 2 HORSEPOWER MOTOR, INLETS: 2" OD. 1.5" ID, DISCHARGE TO FLOOR: 16", MANWAY DIAMETER: 12" ID, AISI 304 STAINLESS STEEL, TIG WELD CONSTRUCTION, HIGH-EFFICIENCY POLYURETHANE INSULATED VESSELS, INCLUDES SPRAY BALLS FOR EASY CIP INTEGRATION, REINFORCED STAINLESS STEEL LEGS, WITH LEVELING FOOT PADS, UL LISTED, 508A CONTROL PANELS, STAINLESS STEEL HANDLE BUTTERFLY VALVES, ELECTRICAL REQUIREMENTS: 3 PHASE, 18.65 AMPS, 60 HERTZ, 208 VOLTS
|
🔒 Subscribe | |
|
|
WALKER | 750 GALLON |
750 GALLON WALKER 316L STAINLESS STEEL JACKETED MIX TANK, CAPACITY: 750 GALLONS, FLAT TOP, DISH BOTTOM, JACKET RATING: MAWP: 75 PSI 320 F MDMT: 75 PSI -20 F, AGITATION: SINGLE SHAFT BOTTOM SWEEP BAFFLE, DRIVEN BY A 2 HORSEPOWER, 230/460 VOLTS, 60 HERTZ, 3 PHASE MOTOR, DISCHARGE: BOTTOM CENTER 2 INCH DIAMETER, CIP SPRAY BALL, VARIOUS 2 INCH INLETS AND FITTINGS, TOP MOUNTED HINGED MANWAY, 316L STAINLESS STEEL CONSTRUCTION MOUNTED ON 4 LEGS
|
🔒 Subscribe | |
|
|
ACCUTEK | 6 HEAD POSITIVE DISPLACEMENT FILLER |
ACCUTEK STAINLESS STEEL 6 HEAD POSITIVE DISPLACEMENT FILLER WITH: (6) HEAD INLINE FILLER 1/4 NOZZLES CONVEYOR DIMESNIONS: WIDTH: 4.5 INCHES LENGTH: 10 FEET STAINLESS STEEL CONSTRUCTION AIR REQUIREMENTS: 90 PSI ELECTRICAL: 110 VOLTS, 60 HZ, PHASE 1
|
🔒 Subscribe | |
|
|
LOWE INDUSTRIES INC. | C-30 |
30 CUBIC FOOT 304 STAINLESS STEEL RIBBON BLENDER, SINGLE SHAFT RIBBON AGITATION, BOTTOM CENTER DISCHARGE DIAMETER: 5 INCHES, INFEED HEIGHT: 78 INCHES, PRODUCT DISCHARGE HEIGHT: 43 INCHES, APPROXIMATE OVERALL DIMENSIONS: LENGTH: 103 INCHES WIDTH: 36 INCHES HEIGHT: 78 INCHES, 304 STAINLESS STEEL CONSTRUCTION, AGITATION SPEED: 8 TO 85 RPM, DRIVE MOTOR: 15 HORSEPOWER, PREVIOUSLY USED IN SPICE BLENDING APPLICATION
|
🔒 Subscribe | |
|
|
FOGG | 36-10 |
FOGG 36-10 FILLER AND CAPPER RATED FOR APPROXIMATELY 100 BOTTLES PER MINUTE. CAPACITY: APPROXIMATELY 100 BOTTLES PER MINUTE DEPENDING ON THE APPLICATION. 36 FILLING HEADS. PLATE DIMENSIONS: LENGTH: 6 INCHES WIDTH: 3 INCHES CENTERS: 4 INCHES. CONTAINER HEIGHTS: 4-12 INCHES. 10 HEAD CHUCK CAPPER: LAST RUNNING 28 MM SPORT CAP BOTTLES. BOWL CAPACITY: 80 GALLONS. WORM SCREW BOTTLE INFEED. STARWHEEL CONTAINER HANDLING (CURRENT SET UP FOR SQUARE QUART CONTAINERS). ELECTRICAL: VOLTS: 230/460 FREQUENCY: 60 HZ PHASE 3. STAINLESS STEEL CONSTRUCTION. LEFT TO RIGHT OPERATION. UNSCRAMBLING BOWL IS NOT WITH THE UNIT.
|
🔒 Subscribe | |
|
|
FLAVOR VAT/MIX TANK
|
🔒 Subscribe | |||
|
|
BLUE BELT CONVEYOR, 108 INCHES LONG X 16.5 INCHES WIDE, WORKING HEIGHT FROM GROUND: 36 INCHES, 1/4 HORSEPOWER MOTOR, MOUNTED ON CASTERS, ELECTRICAL REQUIREMENTS: 230 VOLTS / 3 PHASE / 60 HERTZ / 36 AMPS
|
🔒 Subscribe | |||
|
|
TITAN | TTP-4 |
TITAN TTP-4 SELF PRIMING CENTRIFUGAL PUMP, 20 HORSEPOWER 1770 ROTATIONS PER MINUTE MAXIMUM AMBIENT TEMPERATURE: 40C ELECTRICAL REQUIREMENTS: 208-230/460 VOLTS, 60 HERTZ, 3 PHASE
|
🔒 Subscribe | |
|
|
LOT OF TWO 7.5-INCH W STAINLESS STEEL SMOOTH BELT CONVEYORS - USED LOT OF TWO STAINLESS STEEL SMOOTH BELT CONVEYOR WITH: SECTIONS: 2 SECTION LENGTHS: 57 INCHES, 70 INCHES 57-INCH SECTION: INFEED/DISCHARGE HEIGHT: 27 INCHES BELT WIDTH: 7.5 INCHES ADJUSTABLE GUIDE RAILS MOUNTED ON SCREW-LEVELING FEET MOTOR SPEED CONTROL OVERALL DIMENSIONS: LENGTH: 57 WIDTH: 19 HEIGHT: 28.5 STAINLESS STEEL FRAME CONSTRUCTION ELECTRICAL: 110 V, 50/60 HZ 70-INCH SECTION: INFEED/DISCHARGE HEIGHT: 29 INCHES BELT WIDTH: 7.5 INCHES MOUNTED ON SCREW-LEVELING FEET EFFECTIVE WIDTH: 7.5 INCHES OVERALL DIMENSIONS: LENGTH: 70 WIDTH: 12 HEIGHT: 29 STAINLESS STEEL FRAME CONSTRUCTION ELECTRICAL: 110 V, 50/60 HZ
|
🔒 Subscribe | |||
|
|
AXON | DUAL HOTWIND 2" BY 2.5" |
AXON DUAL HOTWIND 2" BY 2.5" DUAL ZONE HEAT TUNNEL FOR NECK BANDS, APERTURE DIMENSIONS (INCHES): WIDTH: 2 HEIGHT: 2.5 TUNNEL LENGTH: 34 INFEED HEIGHT: 38 INCHES (APPROXIMATELY) OVERALL DIMENSIONS (INCHES): LENGTH: 50 WIDTH: 50 HEIGHT: 87 HEATING ZONES: 2 EQUIPPED WITH (2) LEISTER HOTWIND SYSTEMS: AIR VOLUME (68 F): 7.1 - 31.8 CUBIC FEET PER MINUTE MAX AIR OUTLET TEMPERATURE: 1202 F POWER: 3700 WATTS MOUNTED ON STAINLESS STEEL BASE STAINLESS STEEL CONTACT PARTS PNEUMATICS: PSI: 80 CFM: 5 ELECTRICAL: SINGLE PHASE, 60 HERTZ, 220 VOLTS, 20 AMPS LAST APPLICATION: NECK BAND SHRINKING MODEL: DUAL LEISTER HOTWIND
|
🔒 Subscribe | |
|
|
AXON | DUAL HOTWIND 2" BY 2.5" |
AXON DUAL HOTWIND 2" BY 2.5" DUAL ZONE HEAT TUNNEL FOR NECK BANDS, APERTURE DIMENSIONS (INCHES): WIDTH: 2 HEIGHT: 2.5 TUNNEL LENGTH: 34 INFEED HEIGHT: 38 INCHES (APPROXIMATELY) OVERALL DIMENSIONS (INCHES): LENGTH: 50 WIDTH: 50 HEIGHT: 87 HEATING ZONES: 2 EQUIPPED WITH (2) LEISTER HOTWIND SYSTEMS: AIR VOLUME (68 F): 7.1 - 31.8 CUBIC FEET PER MINUTE MAX AIR OUTLET TEMPERATURE: 1202 F POWER: 3700 WATTS MOUNTED ON STAINLESS STEEL BASE STAINLESS STEEL CONTACT PARTS ELECTRICAL: SINGLE PHASE, 60 HERTZ, 220 VOLTS, 20 AMPS LAST APPLICATION: NECK BAND SHRINKING
|
🔒 Subscribe | |
|
|
CBF | BAKERY INCLINE CONVEYOR |
114 INCH L X 40 INCH W INCLINE CONVEYOR W/ SPRAY BARS AND 1 HP MOTOR, BELT DIMENSIONS: LENGTH: 114 INCHES WIDTH: 40 INCHES INFEED HEIGHT: 36 INCHES DISCHARGE HEIGHT: 56 INCHES OVERALL DIMENSIONS: LENGTH: 114 INCHES WIDTH: 60 INCHES HEIGHT: 57 INCHES 40 INCH WIDE SPRAY BAR FOR PRODUCT COATING STAINLESS STEEL FRAME MOTOR: HORSEPOWER: 1 RPM: 1751/258 ELECTRICAL: 3 PHASE, 60 HERTZ, 230/460 VOLTS
|
🔒 Subscribe | |
|
|
AXON | DUAL LEISTER HOTWIND |
AXON DUAL LEISTER HOTWIND DUAL ZONE HEAT TUNNEL FOR NECK BANDS - USED AXON NECK BAND HEAT SHRINK TUNNEL WITH: APERTURE DIMENSIONS (INCHES): WIDTH: 2 HEIGHT: 2.5 TUNNEL LENGTH: 34 INFEED HEIGHT: 38 INCHES (APPROXIMATELY) OVERALL DIMENSIONS (INCHES): LENGTH: 50 WIDTH: 50 HEIGHT: 87 HEATING ZONES: 2 EQUIPPED WITH (2) LEISTER HOTWIND SYSTEMS: AIR VOLUME (68 F): 7.1 - 31.8 CUBIC FEET PER MINUTE MAX AIR OUTLET TEMPERATURE: 1202 F POWER: 3700 WATTS MOUNTED ON STAINLESS STEEL BASE STAINLESS STEEL CONTACT PARTS ELECTRICAL: SINGLE PHASE, 60 HERTZ, 220 VOLTS, 20 AMPS LAST APPLICATION: NECK BAND SHRINKING S/N:
|
🔒 Subscribe | |
|
|
SEALED AIR | T7H |
SEALED AIR T7H SHRINK TUNNEL, APERTURE: WIDTH: 21.75 INCHES HEIGHT: 12.75 INCHES TUNNEL LENGTH: 42 INCHES MESH CONVEYOR BELT: LENGTH: 74 INCHES WIDTH: 15 INCHES WORKING HEIGHT: 35 INCHES VARIABLE SPEED CONTROL MOUNTED ON CASTERS ELECTRICAL: 230 VOLTS, 3 PHASE, 60 HZ
|
🔒 Subscribe | |
|
|
AXON | DUAL LEISTER HOTWIND |
AXON DUAL LEISTER HOTWIND DUAL ZONE HEAT TUNNEL FOR NECK BANDS - USED AXON NECK BAND HEAT SHRINK TUNNEL WITH: APERTURE DIMENSIONS (INCHES): WIDTH: 2 HEIGHT: 2.5 TUNNEL LENGTH: 34 INFEED HEIGHT: 38 INCHES (APPROXIMATELY) OVERALL DIMENSIONS (INCHES): LENGTH: 50 WIDTH: 50 HEIGHT: 87 HEATING ZONES: 2 EQUIPPED WITH (2) LEISTER HOTWIND SYSTEMS: AIR VOLUME (68 F): 7.1 - 31.8 CUBIC FEET PER MINUTE MAX AIR OUTLET TEMPERATURE: 1202 F POWER: 3700 WATTS MOUNTED ON STAINLESS STEEL BASE STAINLESS STEEL CONTACT PARTS ELECTRICAL: SINGLE PHASE, 60 HERTZ, 220 VOLTS, 20 AMPS LAST APPLICATION: NECK BAND SHRINKING S/N:
|
🔒 Subscribe | |
|
|
DIXIE CANNING | UVD-AL |
DIXIE CANNING SEMI AUTOMATIC UVD AL SEAMER, DOUBLE SEAM CAN RANGE: 2 INCHES TO 6.25 INCH DIAMETER, MAXIMUM HEIGHT: UP TO 7 INCHES TALL, OUTPUT: 10 CANS PER MINUTE - ATMOSPHERIC, 6 CANS PER MINUTE - VACUUM, 4 CANS PER MINUTE - VACUUM AND GAS, PLATFORM PIVOTING DOOR, BALDOR MOTOR HP: .75, RPM: 3450, 38 INCH WORKING PLATFORM HEIGHT, VACUUM PUMP, AIR REGULATOR ASSEMBLY, E-STOP
|
🔒 Subscribe | |
|
|
BUSSE | W300 |
BUSSE W300 MANUAL LOW LEVEL INFEED DEPALLETIZER, PRODUCTION SPEED: 145 CANS PER MINUTE, MAXIMUM LOAD SIZE (INCHES): WIDTH: 48 DEPTH: 40 HEIGHT: 50, LOAD CAPACITY: 2000 POUNDS, MACHINE FLOW/HAND: RIGHT ANGLE, INFEED HEIGHT: 13 INCHES, ACCUMULATION BED ELEVATION: 72 INCHES, OVERALL DIMENSIONS (INCHES): LENGTH: 91 WIDTH: 56 HEIGHT: 94, MANUAL OPERATION, LOW LEVEL INFEED, EMPTY CANS, PALLET ORIENTATION: WIDE WAY, PAINT: GRAY LIQUID STAINLESS STEEL COATING, COMPRESSED AIR: 14 SCFM AT 80 PSI, ELECTRICAL: 3 PHASE, 60 HERTZ, 460 VOLTS, 60 AMPS, LAST APPLICATION: ALUMINUM PISTON CANS (55 MM DIAMETER X 22 MM HEIGHT) AT 120 CANS PER MINUTE
|
🔒 Subscribe | |
|
|
PACK LEADER | PL-211 |
PACK LEADER PL-211 TOP LABEL APPLICATOR WITH STAND, VERSATILE LABELING MACHINE FOR EFFICIENT AND PRECISE LABELING, ONE-BUTTON TEACH FUNCTION, ADJUSTABLE SENSORS, AUTOMATIC AND SEMI-AUTOMATIC OPERATIONS, PRODUCTION PRESET, LABEL COUNT, BATTERY-FREE MICROPROCESSOR, AUTO LABEL-SET, MISSING LABEL-DETECT FUNCTION. MAXIMUM DISPENSING SPEED: UP TO 40 METERS PER MINUTE. MAXIMUM LABEL SIZE: LENGTH: 6 INCHES, WIDTH: 11.8 INCHES. MAXIMUM CONTAINER WIDTH: 8.5 INCHES. RANGE OF CONTAINER LENGTH: 7.5 INCHES. SPOOL DIAMETER: 14 INCHES. INNER CORE: 3 INCHES. ELECTRICAL REQUIREMENTS: 110 VOLTS, 60 HERTZ, 1 PHASE.
|
🔒 Subscribe | |
|
|
TACH-IT | CTL-270 |
TACH-IT CTL-270 WIPE-ON LABEL APPLICATOR, LABEL DIMENSIONS: WIDTH: 3/4 TO 9 3/4 INCHES HEIGHT: 13/32 TO 5 INCHES LABEL ROLL DIAMETER: 12 INCHES CORE SIZE: 3 INCHES TOUCH PANEL CONTROLS (5) MEMORY PRESETS STEPPER MOTOR BUILT IN ADJUSTABLE SPEED ELECTRICAL REQUIREMENTS: OVERALL DIMENSIONS: LENGTH: 25 INCHES WIDTH: 14 INCHES HEIGHT: 33 INCHES LAST RUNNING 1 X 4 INCH LABEL.
|
🔒 Subscribe | |
|
|
KRONES | ST 92/1-4500-S |
KRONES ST 92/1-4500-S HEAT SHRINK TUNNEL, 34 INCH W X 16 INCH T APERTURE, MESH CHAIN CONVEYOR BELT (37 INCH W X 164 INCH L), ALLEN-BRADLEY POWERFLEX MOTOR DRIVES, RIGHT TO LEFT PRODUCT FLOW, COOLING FAN WITH MARATHON ELECTRIC MOTOR, 460 VOLTS / 3 PHASE / 60 HERTZ
|
🔒 Subscribe | |
|
|
DIVERSIFIED CAPPING EQUIPMENT | STEAM CAPPER |
DIVERSIFIED CAPPING EQUIPMENT STEAM CAPPER WITH RESINA STYLE CAP SORTER. CONTAINER CONVEYOR (MISSING BELT): LENGTH: 105 INCHES WIDTH: 4 INCHES INFEED/DISCHARGE HEIGHT: 35 INCHES. RESINA STYLE CAP SORTER: 32 INCH DIAMETER. CAP HOPPER: LENGTH: 30 INCHES WIDTH: 30 INCHES DEPTH: 20 INCHES. PUSH BUTTON CONTROLS. WASHDOWN IDC MOTOR. ELECTRICAL: VOLTS: 460 FREQUENCY: 60 HZ PHASE 3.
|
🔒 Subscribe | |
|
|
CAPMATIC | TECHNIC 2 SX |
CAPMATIC TECHNIC 2 SX LABELER
|
🔒 Subscribe | |
|
|
CAPMATIC | TECHNIC 2 DX |
CAPMATIC TECHNIC 2 DX LABELER
|
🔒 Subscribe | |
|
|
MOISTTECH CORP. | 3000 |
MOISTTECH CORP. 3000 STAINLESS STEEL NEAR-INFRARED MOISTURE SENSOR, MOISTURE RANGES DEPENDING ON APPLICATION: 0 - 0.1% PPM 0 - 100% PPM MEASURED NIR CONSTITUENTS: 1, 2, 3 MOISTURE, OIL, COATING, ETC. ACCURACY: 0.01% DEPENDING ON APPLICATION OPTICAL MEASUREMENT DISTANCE: BETWEEN 4 AND 16 INCHES SAMPLING SIZE DIAMETER: APPROXIMATELY 1.5 INCHES OPERATING TEMPERATURE: BETWEEN 0 - 130 F KINCO TOUCH SCREEN HMI APPROXIMATE OVERALL DIMENSIONS: LENGTH: 12.1 INCHES WIDTH: 7.1 INCHES HEIGHT: 6.4 INCHES CAST ALUMINUM, IP65, STAINLESS STEEL CONSTRUCTION ELECTRICAL: 50/60 HZ, 80-260 VOLTS
|
🔒 Subscribe | |
|
|
PHOENIX | PRTL-2150A |
PHOENIX PRTL-2150A SEMI-AUTOMATIC ROTARY ARM STRETCH WRAPPER, UP TO 40 PALLETS PER HOUR, MAX WRAP SPEED 14 RPM, MAX LOAD DIMENSIONS 56X56X80 INCHES, STANDARD FILM WIDTH 20 INCHES, STANDARD PRE-STRETCH 245%, CONTROLLER UPGRADED TO ALLEN-BRADLEY PLC, WELDED STEEL FRAME, POWER 120 VAC / 60 HZ / 15 A / SINGLE PHASE
|
🔒 Subscribe | |
|
|
KALISH | 5404 BANDIT |
KALISH 5404 BANDIT SINGLE CHUCK CAPPER, ADJUSTABLE CHUCK TORQUE, ADJUSTABLE CAPPING HEIGHT, VARIABLE SPEED
|
🔒 Subscribe |
MISC
COLLOID MILL EMULSIFIER WITH VARI FREQ DRIVE, MOUNTED ON CART WITH CASTERS. MAX RPM: 3515 @ 440 VOLT...
Hammer Price:
🔒
EMKON AUTOMATION
PACKAGING EQUIPMENT
EMKON AUTOMATION STAINLESS STEEL SMOOTH TOP BELT INFEED CONVEYOR, CONVEYOR DIMENSIONS: LENGTH: 92 IN...
Hammer Price:
🔒
HYTROL SMOOTH TOP CONVEYOR
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
21' LONG X 20" WIDE SMOOTH TOP CONVEYOR, 32" WORKING HEIGHT FROM GROUND, 1/4 HORSEPOWER MOTOR, BOLT ...
Hammer Price:
🔒
PILLAR MK-20
MISC
20KW PILLAR MK-20 INDUCTION HEATER, POWER RANGE: 2.5 KW - 20 KW, FREQUENCY: 50 KHZ - 450 KHZ, MOFSET...
Hammer Price:
🔒
SPX FLOW 040 U2
TANKS, PUMPS & STORAGE EQUIPMENT
SPX FLOW 040 U2 POSITIVE DISPLACEMENT PUMP, 3 HORSEPOWER, CAPACITY: UP TO 45 GALLONS PER MINUTE DEPE...
Hammer Price:
🔒
3M 200A
PACKAGING EQUIPMENT
3M-MATIC MODEL 200A TOP AND BOTTOM TAPE CASE SEALER - USED 3M CASE TAPER WITH: THROUGHPUT: UP TO 40 ...
Hammer Price:
🔒
MISC
42 INCH DIAMETER STAINLESS STEEL DISC UNSCRAMBLING TABLE, 42 INCH DISCHARGE HEIGHT, 220 VOLTS S/N:...
Hammer Price:
🔒
MISC
42 INCH DIAMETER STAINLESS STEEL DISC UNSCRAMBLING TABLE, 42 INCH TABLE DIAMETER, 71 INCH LONG X 48 ...
Hammer Price:
🔒
MISC
42 INCH DIAMETER STAINLESS STEEL DISC UNSCRAMBLING TABLE, 42 INCH DIAMETER, 71 INCH LONG X 48 INCH W...
Hammer Price:
🔒
MISC
42 INCH DIAMETER STAINLESS STEEL DISC UNSCRAMBLING TABLE, 42 INCH DIAMETER, 71 INCH LONG X 48 INCH W...
Hammer Price:
🔒
SHANGHAI JINGYUAN J-Y300
COMMERCIAL PRINTING & BINDERY EQUIPMENT
SHANGHAI JINGYUAN J-Y300 LASER INK JET CODER, TOUCH SCREEN HMI, ADJUSTABLE HEIGHT, MOUNTED ON CASTER...
Hammer Price:
🔒
E PACK MACHINERY CLEANER/BLOWER
PACKAGING EQUIPMENT
E PACK MACHINERY 12 HEAD INLINE AIR BOTTLE CLEANER BLOWER, HIGH-EFFICIENCY MACHINE DESIGNED TO CLEAN...
Hammer Price:
🔒
TOLKE DSV1500
PACKAGING EQUIPMENT
TOLKE DSV1500 ROTARY HIGH SPEED CAP SORTER UP TO 2000 CAPS PER MINUTE WITH SERVO CAP ORIENTER. ENSUR...
Hammer Price:
🔒
HARTNESS 825
PACKAGING EQUIPMENT
HARTNESS 825 AUTOMATIC STAINLESS STEEL DROP PACKER UP TO 35 CASES PER MINUTE. CASE SIZES (INCHES): L...
Hammer Price:
🔒
SWF TF-600VK
PACKAGING EQUIPMENT
SWF TF600VK ONE PIECE VERTICAL GLUE SEAL TRAY FORMER, OUTPUT: UP TO 35 TRAYS PER MINUTE DEPENDING ON...
Hammer Price:
🔒
SACMI STEAM TUNNEL
PACKAGING EQUIPMENT
23 FEET LONG STEAM TUNNEL - USED SACMI STEAM TUNNEL WITH: PREVIOUSLY RUNNING 12 OUNCE TO 1 LITER PLA...
Hammer Price:
🔒
UNKNOWN
INDUSTRIAL AND COOLING HEATING EQUIPMENT
119 GALLON WATER HEATER - USED WATER HEATER WITH: MAX PRESSURE: 150 PSI ELEMENTS: 6 OVERALL DIMENSIO...
Hammer Price:
🔒
UNKNOWN
TANKS, PUMPS & STORAGE EQUIPMENT
119 GALLON WATER TANK - USED WATER HEATER WITH: MAX PRESSURE: 150 PSI ELEMENTS: 6 OVERALL DIMENSIONS...
Hammer Price:
🔒
MEHEEN M6
PACKAGING EQUIPMENT
MEHEEN M6 6-HEAD BOTTLE FILLER, ADVANCED HIGH-SPEED FILLING MACHINE FOR BEVERAGES, FEATURES SIX FILL...
Hammer Price:
🔒
MISC
5 CUBIC FOOT CARBON STEEL RIBBON BLENDER WITH DRIVE MOTOR, MIXER RPM: 46, CHAMBER DIMENSIONS: LENGTH...
Hammer Price:
🔒
HIGHLAND EQUIPMENT
MISC
JACKETED STAINLESS STEEL TANK WITH: CAPACITY: ~172.2 GALLONS TANK DIAMETER: 37 INCHES MAX. PRESSURE:...
Hammer Price:
🔒
PRECISION STAINLESS UNKNOWN
TANKS, PUMPS & STORAGE EQUIPMENT
200 GALLON STAINLESS STEEL JACKETED TANK WITH HIGH SHEAR MIXER. CAPACITY: 200 GALLONS. DIMPLED JACKE...
Hammer Price:
🔒
DCI SA240
TANKS, PUMPS & STORAGE EQUIPMENT
240 GALLON DCI STAINLESS STEEL JACKETED TANK, 316 STAINLESS STEEL, VERTICAL, DOME TOP, DISH BOTTOM. ...
Hammer Price:
🔒
COMAT STVS150.1
TANKS, PUMPS & STORAGE EQUIPMENT
3995 GALLON STAINLESS STEEL SINGLE WALL TANK - USED COMAT STAINLESS STEEL TANK WITH: TANK CAPACITY: ...
Hammer Price:
🔒
DEUTSCHE BEVERAGE TECHNOLOGY EMULSIFICATION TANK
TANKS, PUMPS & STORAGE EQUIPMENT
DEUTSCHE BEVERAGE TECHNOLOGY EMULSIFICATION TANK, 2 HORSEPOWER MOTOR, INLETS: 2" OD. 1.5" ID, DISCHA...
Hammer Price:
🔒
WALKER 750 GALLON
TANKS, PUMPS & STORAGE EQUIPMENT
750 GALLON WALKER 316L STAINLESS STEEL JACKETED MIX TANK, CAPACITY: 750 GALLONS, FLAT TOP, DISH BOTT...
Hammer Price:
🔒
ACCUTEK 6 HEAD POSITIVE DISPLACEMENT FILLER
PACKAGING EQUIPMENT
ACCUTEK STAINLESS STEEL 6 HEAD POSITIVE DISPLACEMENT FILLER WITH: (6) HEAD INLINE FILLER 1/4 NOZZLES...
Hammer Price:
🔒
LOWE INDUSTRIES INC. C-30
FOOD PROCESSING AND RESTAURANT EQUIPMENT
30 CUBIC FOOT 304 STAINLESS STEEL RIBBON BLENDER, SINGLE SHAFT RIBBON AGITATION, BOTTOM CENTER DISCH...
Hammer Price:
🔒
FOGG 36-10
PACKAGING EQUIPMENT
FOGG 36-10 FILLER AND CAPPER RATED FOR APPROXIMATELY 100 BOTTLES PER MINUTE. CAPACITY: APPROXIMATELY...
Hammer Price:
🔒
MISC
BLUE BELT CONVEYOR, 108 INCHES LONG X 16.5 INCHES WIDE, WORKING HEIGHT FROM GROUND: 36 INCHES, 1/4 H...
Hammer Price:
🔒
TITAN TTP-4
TANKS, PUMPS & STORAGE EQUIPMENT
TITAN TTP-4 SELF PRIMING CENTRIFUGAL PUMP, 20 HORSEPOWER 1770 ROTATIONS PER MINUTE MAXIMUM AMBIENT T...
Hammer Price:
🔒
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
LOT OF TWO 7.5-INCH W STAINLESS STEEL SMOOTH BELT CONVEYORS - USED LOT OF TWO STAINLESS STEEL SMOOTH...
Hammer Price:
🔒
AXON DUAL HOTWIND 2" BY 2.5"
PACKAGING EQUIPMENT
AXON DUAL HOTWIND 2" BY 2.5" DUAL ZONE HEAT TUNNEL FOR NECK BANDS, APERTURE DIMENSIONS (INCHES): WID...
Hammer Price:
🔒
AXON DUAL HOTWIND 2" BY 2.5"
PACKAGING EQUIPMENT
AXON DUAL HOTWIND 2" BY 2.5" DUAL ZONE HEAT TUNNEL FOR NECK BANDS, APERTURE DIMENSIONS (INCHES): WID...
Hammer Price:
🔒
CBF BAKERY INCLINE CONVEYOR
PACKAGING EQUIPMENT
114 INCH L X 40 INCH W INCLINE CONVEYOR W/ SPRAY BARS AND 1 HP MOTOR, BELT DIMENSIONS: LENGTH: 114 I...
Hammer Price:
🔒
AXON DUAL LEISTER HOTWIND
PACKAGING EQUIPMENT
AXON DUAL LEISTER HOTWIND DUAL ZONE HEAT TUNNEL FOR NECK BANDS - USED AXON NECK BAND HEAT SHRINK TUN...
Hammer Price:
🔒
SEALED AIR T7H
PACKAGING EQUIPMENT
SEALED AIR T7H SHRINK TUNNEL, APERTURE: WIDTH: 21.75 INCHES HEIGHT: 12.75 INCHES TUNNEL LENGTH: 42 I...
Hammer Price:
🔒
AXON DUAL LEISTER HOTWIND
PACKAGING EQUIPMENT
AXON DUAL LEISTER HOTWIND DUAL ZONE HEAT TUNNEL FOR NECK BANDS - USED AXON NECK BAND HEAT SHRINK TUN...
Hammer Price:
🔒
DIXIE CANNING UVD-AL
PACKAGING EQUIPMENT
DIXIE CANNING SEMI AUTOMATIC UVD AL SEAMER, DOUBLE SEAM CAN RANGE: 2 INCHES TO 6.25 INCH DIAMETER, M...
Hammer Price:
🔒
BUSSE W300
PACKAGING EQUIPMENT
BUSSE W300 MANUAL LOW LEVEL INFEED DEPALLETIZER, PRODUCTION SPEED: 145 CANS PER MINUTE, MAXIMUM LOAD...
Hammer Price:
🔒
PACK LEADER PL-211
PACKAGING EQUIPMENT
PACK LEADER PL-211 TOP LABEL APPLICATOR WITH STAND, VERSATILE LABELING MACHINE FOR EFFICIENT AND PRE...
Hammer Price:
🔒
TACH-IT CTL-270
PACKAGING EQUIPMENT
TACH-IT CTL-270 WIPE-ON LABEL APPLICATOR, LABEL DIMENSIONS: WIDTH: 3/4 TO 9 3/4 INCHES HEIGHT: 13/32...
Hammer Price:
🔒
KRONES ST 92/1-4500-S
PACKAGING EQUIPMENT
KRONES ST 92/1-4500-S HEAT SHRINK TUNNEL, 34 INCH W X 16 INCH T APERTURE, MESH CHAIN CONVEYOR BELT (...
Hammer Price:
🔒
DIVERSIFIED CAPPING EQUIPMENT STEAM CAPPER
PACKAGING EQUIPMENT
DIVERSIFIED CAPPING EQUIPMENT STEAM CAPPER WITH RESINA STYLE CAP SORTER. CONTAINER CONVEYOR (MISSING...
Hammer Price:
🔒
MOISTTECH CORP. 3000
TEST, MEASUREMENT & QUALITY EQUIPMENT
MOISTTECH CORP. 3000 STAINLESS STEEL NEAR-INFRARED MOISTURE SENSOR, MOISTURE RANGES DEPENDING ON APP...
Hammer Price:
🔒
PHOENIX PRTL-2150A
PACKAGING EQUIPMENT
PHOENIX PRTL-2150A SEMI-AUTOMATIC ROTARY ARM STRETCH WRAPPER, UP TO 40 PALLETS PER HOUR, MAX WRAP SP...
Hammer Price:
🔒
KALISH 5404 BANDIT
PACKAGING EQUIPMENT
KALISH 5404 BANDIT SINGLE CHUCK CAPPER, ADJUSTABLE CHUCK TORQUE, ADJUSTABLE CAPPING HEIGHT, VARIABLE...
Hammer Price:
🔒