No Reserve Food and Beverage Processing Equipment
Category: MATERIAL HANDLING & WAREHOUSE EQUIPMENT
Total Lots:
368
Total Sales:
🔒 Subscribe
Lot Price Distribution
| Year | Make | Model | Lot Description | Hammer Price | |
|---|---|---|---|---|---|
|
MAER | NTN 20/12 |
MAER NTN 20/12 NECK TO NECK PET BOTTLE TRIMMER WITH: SPIN TRIMMERS THAT ALLOW CUTTING THE DOME SHARED BY TWO BOTTLES JOINED AT THE NECK COMING FROM THE SAME MOULD, KNOWN AS LOGS NECK TO NECK TANDEM BOTTLES SUITABLE FOR: LIQUID YOGURT AND OTHER DAIRY DRINKS BOTTLED IN POLYETHYLENE BOTTLES (PE-HDPE) ON 80 ML TO 300 ML CAPACITY BOTTLES BLOW MOULDERS OF ALL KIND OF BOTTLES, AS A COMPLEMENT OF THE BLOW MOULDING MACHINE WITH TANDEM BOTTLE CAVITIES BOTTLE MANUFACTURERS WITH IN-HOUSE BLOW MOULDING OPERATIONS IN THE PLANT OF THE END CUSTOMER OUTPUT: UP TO 14,520 BOTTLES PER HOUR PREVIOUSLY RAN 8 OUNCE AND 4 OUNCE LOGS/BOTTLES OF STANDARD/GENERIC BOTTLE SHAPES S/N: 5690
|
🔒 Subscribe | |
|
|
[24" W X 13" T] STAINLESS STEEL STEAM SHRINK TUNNEL APERTURE DIMENSIONS: 24 INCHES WIDE X 13.5 INCHES TALL TUNNEL LENGTH: 65.5 INCHES CONVEYOR HEIGHT: 40.5 INCHES .5 HORSEPOWER CONVEYOR MOTOR WASTE WATER RE-CIRCULATION PUMP BOILER NOT INCLUDED STAINLESS STEEL CONSTRUCTION SCREW DOWN LEVELING FEET
|
🔒 Subscribe | |||
|
|
SAFELINE | POWERPLUS |
19.5" X 5" SAFELINE POWERPLUS GRAVITY METAL DETECTOR WITH: APERTURE DIMENSIONS: 19.5 INCHES WIDE X 5 INCHES TALL SEALED FLAP PRODUCT REJECT PAINTED MILD STEEL FRAME FOOD GRADE CONTACT PARTS PREVIOUSLY USED FOR PEANUTS
|
🔒 Subscribe | |
|
|
GENERAL PROCESSING SYSTEMS | INCLINE AUGER CONVEYOR |
WITH: HOPPER DIMENSIONS: 53 INCHES WIDE X 42 INCHES LONG X 47 INCHES TALL INFEED HEIGHT: 96 INCHES OPEN HOPPER TOP AUGER LENGTH: 113 INCHES DISCHARGE HEIGHT: 50 INCHES AUGER FLIGHT CENTERS: 12 INCHES AUGER DIAMETER: 12 INCHES TROUGH WIDTH: 13.5 INCHES 1.5 HORSEPOWER MOTOR STAINLESS STEEL CONSTRUCTION
|
🔒 Subscribe | |
|
|
THERMO SCIENTIFIC | APEX 500 |
[2000-2030] THERMO SCIENTIFIC APEX 500 CHECKWEIGHER METAL DETECTOR COMBO - USED THERMO SCIENTIFIC CHECKWEIGHER AND METAL DETECTOR COMBINATION UNIT WITH: THREE SECTION BELT AND CHAIN CONVEYOR SYSTEM BELT INFEED CONVEYOR DIMENSIONS: 9.5 INCHES WIDE X 11 INCHES LONG WEIGHING AREA LENGTH: 21 INCHES WEIGHING AREA WIDTH: CURRENTLY SET AT 5.25 INCHES CHAIN CONVEYOR OVER LOAD CELL METAL DETECTOR APERTURE: 10 INCHES WIDE X 4 INCHES TALL MAXIMUM PRODUCT HEIGHT: APPROXIMATELY 2.75 INCHES CONVEYOR HEIGHT: 37.75 INCHES LEFT-TO-RIGHT PRODUCT FLOW STAINLESS STEEL CONSTRUCTION SCREW DOWN LEVELING FEET ORIGINALLY SET TO DETECT: 1.2MM FERROUS 1.2MM NONFERROUS 1.5MM STAINLESS STEEL TWO AIR JETS: ONE FOR DETECTED METAL AND ONE FOR OVER/UNDER WEIGHTS S/N:08181010A
|
🔒 Subscribe | |
|
|
DOBOY | SUPER MUSTANG 1-UP |
[EQUIPMENT TYPE & SPECS] [SERIAL NUMBER]
DOBOY SUPER MUSTANG 1-UP SEAL JAW PRINT REGISTERED FLOW WRAPPER - USED DOBOY SUPER MUSTANG PRINT REGISTERED FLOW WRAPPER WITH: PRODUCTION OUTPUT RATE: UP TO 40 PACKAGES PER MINUTE, DEPENDING ON MATERIALS AND APPLICATION MINIMUM PACKAGE SIZE: 4 LENGTH X 0.5 WIDTH (INCHES) MAXIMUM PACKAGE SIZE: 15 LENGTH X 9 WIDTH (INCHES) MAXIMUM FILM WIDTH: 20 INCHES STAINLESS STEEL CONSTRUCTION POWER SUPPLY: 230 VOLTAGE / 3 PHASE / 60 HERTZ / 32 AMPERAGE APPROX. OVERALL DIMENSIONS: 170 LENGTH X 35 WIDTH X 79 HEIGHT (INCHES) S/N: 81-16087
|
🔒 Subscribe | |
|
|
ISHIDA | CCW-Z-214W-S/30-WP |
ISHIDA CCW-Z-214W-S/30-WP STAINLESS STEEL COMPUTER COMBINATION SCALE - USED ISHIDA CCW-Z-214W-S/30-WP COMBINATION WEIGHER WITH: WEIGHT RANGE: 10 - 2500 GRAMS BUCKET VOLUME: 1 LITER NUMBER OF HEADS: 14 DIMPLED BUCKETS TOUCHSCREEN CONTROL PANEL ELECTRICAL REQUIREMENTS: 208 VOLTS 60 HZ 3 PHASE STAINLESS STEEL CONSTRUCTION PRODUCT LAST RAN: FROZEN CHICKEN S/N: 93/10085
|
🔒 Subscribe | |
|
|
FORTRESS | SC-CONV-96SSH22FG |
FORTRESS SC-CONV-96SSH22FG INCLINE METAL DETECTOR WITH A 23"W X 2"H APERTURE. EFFECTIVE APERTURE DIMENSIONS: 23 INCHES WIDE X 2.5 INCHES TALL. APERTURE DIMENSIONS: 24 INCHES WIDE X 4 INCHES TALL. CONVEYOR DIMENSIONS: 22 INCHES WIDE X 96 INCHES LONG. INFEED HEIGHT: 22 INCHES. DISCHARGE HEIGHT: 61 INCHES. LEFT TO RIGHT PRODUCT FLOW. PRODUCT DROP-OUT REJECT. .5 HORSE POWER CONVEYOR MOTOR. VARIABLE CONVEYOR SPEEDS. STAINLESS STEEL CONSTRUCTION. S/N: CVF-3529
|
🔒 Subscribe | |
|
|
WEIGHPACK | COMBI SCALE 14 HEAD |
WEIGHPACK 14 HEAD STAINLESS STEEL DIMPLED BUCKET COMBINATION SCALE - USED WEIGHPACK 14 HEAD DIMPLED BUCKET COMBINATION SCALE WITH: UP TO 130 BAGS PER MINUTE, DEPENDING ON MATERIALS AND APPLICATION NUMBER OF HEADS: 14 DIMPLED BUCKETS STAINLESS STEEL CONTROLS DUMP CAPACITY: 10 - 3,000 GRAMS BUCKET SIZE: 1 LITER S/N: 2472
|
🔒 Subscribe | |
|
|
METTLER-TOLEDO | V4-RAD |
[METTLER-TOLEDO V4-RAD] METAL DETECTOR WITH A 31" WIDE X 4" TALL APERTURE - USED METTLER-TOLEDO V4-RAD METAL DETECTOR WITH: APERTURE DIMENSIONS: WIDTH: 31.5 INCHES HEIGHT: 4 INCHES EFFECTIVE APERTURE HEIGHT: 3 INCHES INCLINE CONVEYOR BELT CONVEYOR WIDTH: 30 INCHES INCLINED LENGTH: 84 INCHES INFEED HEIGHT: 14 INCHES DISCHARGE LENGTH: 60 INCHES DISCHARGE HEIGHT: 39 INCHES LEFT TO RIGHT PRODUCT FLOW HEAD TYPE: R SERIES PROFILE BUILD LEVEL: H4.1.1 COIL PITCH: 100 MILLIMETERS TOUCH SCREEN HMI STAINLESS STEEL, WASHDOWN CONSTRUCTION SCREW DOWN LEVELING FEET ELECTRICAL REQUIREMENTS: 120 VOLTS 50 HZ SINGLE PHASE PREVIOUSLY USED FOR CARROTS S/N:105227
|
🔒 Subscribe | |
|
|
METTLER-TOLEDO | V4-RAD |
METTLER-TOLEDO V4-RAD METAL DETECTOR WITH A 31" WIDE X 4" TALL APERTURE. APERTURE DIMENSIONS: WIDTH: 31.5 INCHES HEIGHT: 4 INCHES EFFECTIVE APERTURE HEIGHT: 3 INCHES. INCLINE CONVEYOR BELT. CONVEYOR WIDTH: 30 INCHES. INCLINED LENGTH: 84 INCHES. INFEED HEIGHT: 14 INCHES. DISCHARGE LENGTH: 60 INCHES. DISCHARGE HEIGHT: 39 INCHES. LEFT TO RIGHT PRODUCT FLOW. HEAD TYPE: R SERIES PROFILE. BUILD LEVEL: H4.1.1. COIL PITCH: 100 MILLIMETERS. TOUCH SCREEN HMI. STAINLESS STEEL, WASHDOWN CONSTRUCTION. SCREW DOWN LEVELING FEET. ELECTRICAL REQUIREMENTS: 120 VOLTS 50 HZ SINGLE PHASE. PREVIOUSLY USED FOR CARROTS. S/N: 109506
|
🔒 Subscribe | |
|
|
KLIKLOK/GENESIS | GLC |
KLIKLOK/GENESIS GLC TOP LOAD CARTON GLUE SEALER WITH: CAPABLE OF SEALING TRI SEAL AND TOP LOAD CARTONS, DEPENDING ON MATERIALS AND APPLICATION SPEEDS FROM 30 TO 200 CPM, DEPENDING ON MATERIALS AND APPLICATION MODEL: GLC CARTON SIZE RANGE: LENGTH: 4 - 15 INCHES WIDTH: 3.25 - 12 INCHES DEPTH: 1.5 - 5 INCHES LUG-LESS STYLE CARTON CLOSER NORDSON HOT MELT GLUE SYSTEM ROLLER COMPRESSION TOUCHSCREEN DISPLAY AB MICROLOGIX 1000 CONTROLLER ELECTRICS: PHASE: 3 FREQUENCY: 60 HERTZ VOLTS: 230 VOLTS S/N: 128
|
🔒 Subscribe | |
|
|
SHANKLIN | F-5A |
SHANKLIN F-5A HORIZONTAL FLOW THRU SIDE SEAL SHRINK WRAPPER WITH LUGGED INFEED - USED SHANKLIN F-5A SIDE SEALER WITH LUGGED INFEED WITH: OUTPUT: UP TO 75 PACKAGES PER MINUTE, DEPENDING ON MATERIALS AND APPLICATION PACKAGE SIZE RANGE: MINIMUM: .5 INCHES WIDE X .125 INCHES TALL X 3 INCHES LONG MAXIMUM: 16 INCHES WIDE X 6 INCHES TALL X 48 INCHES LONG MAXIMUM FILM WIDTH: 22 INCHES FOLDED, 44 INCHES FLAT - CENTERFOLDER REQUIRED FOR FLAT FILM FILM SPEEDS: UP TO 90 FEET PER MINUTE LONGITUDINAL SEAL: WELD BEAD AT SIDE OF PACKAGE HOT KNIFE END SEAL S/N: F08013-01
|
🔒 Subscribe | |
|
|
HINDS-BOCK | 4P-64D |
[HINDS-BOCK 4P-64D] 4 HEAD STAINLESS STEEL INLINE PISTON FILLER - USED HINDS-BOCK 4 HEAD INLINE FILLER WITH: 4 FILL HEADS PISTON SIZES INCLUDED: 12 OUNCES CURRENT FILL HEIGHT: 53 INCHES MOUNTED ON ROLLER CASTERS FOR EASE OF MOBILITY ON/OFF PUSH BUTTON CONTROLS S/N: 1311
|
🔒 Subscribe | |
|
|
SLIDELL FISCHBEIN | VFN-9902 |
[SLIDELL FISCHBEIN] BAG FILLING AND FILLING SYSTEM FOR FREE FLOWING PRODUCT SEMI-AUTOMATIC - OPERATOR PLACES BAG TO BE FILLED ON THE BAG HANGER UNDERNEATH THE WEIGH FEEDER SYSTEM INCLUDES: TUBAR TOTE DUMPER MEZZANINE SLIDELL WEIGH FEEDER FISCHBEIN BAG SEALER V-BELT OUTFEED CONVEYOR TUBAR TOTE DUMPER HYDRAULIC MAXIMUM LIFTING CAPACITY: 2,000 POUNDS MAXIMUM TOTE DIMENSIONS: 40 LONG X 50 INCHES WIDE X 60 INCHES TALL DISCHARGE HEIGHT: 17.83 FEET FUNNEL DISCHARGE WITH PNEUMATIC GATE VALVE SLIDELL VFN-9902 WEIGH FEEDER HOPPER CAPACITY: APPROXIMATELY 13 CUBIC FEET HOPPER PRODUCT LEVEL SWITCHES VIBRATORY FEEDERS DELIVER PRODUCT FROM HOPPER TO CONVEYORIZED WEIGHING AREA MEZZANINE ELEVATED SURFACE AREA: 122 INCHES X 106 INCHES PLATFORM HEIGHT - STANDING AREA TO FLOOR: 127 INCHES FISCHBEIN HAS 200 BAG SEALER HOT AIR SEALER RIGHT TO LEFT PRODUCT FLOW SEALING AREA LENGTH: 36 INCHES DIGITAL TEMPERATURE CONTROLS BAG TYPES: HEAT SEALABLE STRUCTURES IN PILLOW AND GUSSETED BAGS MAXIMUM BAG THICKNESS: 10 MILS FREE BAG TOP: 6 INCHES, MINIMUM V-BELT OUTFEED CONVEYOR CONVEYOR LENGTH: 153 INCHES BELT WIDTHS: 7.75 INCHES CONVEYOR HEIGHT: 20 INCHES ALLEN-BRADLEY PANELVIEW 600 HMI ALLEN-BRADLEY PROGRAMMABLE LOGIC CONTROLS OUTPUT: APPROXIMATELY 20 BAGS PER MINUTE - DEPENDING ON PRODUCT, FILL AMOUNT, AND BAG TYPE PAINTED MILD STEEL FRAME WITH STAINLESS STEEL CONTACT PARTS ORIGINALLY DESIGNED TO RUN PELLETS
|
🔒 Subscribe | |
|
|
KODIAK | 901-120 |
KODIAK 901-120 HAND LOAD GLUE CARTONER 12" CENTERS - USED KODIAK 901-120 CARTONER WITH: OUTPUT: 20 TO 120 CARTONS PER MINUTE, DEPENDING ON MATERIALS AND APPLICATION CARTON DIMENSIONS: MINIMUM: 5 INCHES LENGTH X 1 INCH WIDTH X 2 INCHES DEEP MAXIMUM: 12 INCHES LENGTH X 2.5 INCHES WIDTH X 9 INCHES DEEP 24 INCH LONG BLANK CARTON MAGAZINE ROTARY BLANK CARTON FEEDER 3 PRODUCT CARRY CHAINS LUGS CENTERS: 12 INCHES 70 INCH LONG PRODUCT LOADING AREA MAJOR AND MINOR FLAP CLOSERS NORDSON HOT MELT GLUE UNIT CONTROL PANEL WITH VARIABLE SPEED CONTROLLER HEAVY DUTY BASE FRAME WITH SAFETY GUARDING S/N: 1064
|
🔒 Subscribe | |
|
|
SPAN TECH | MULTISPAN 9 |
SPAN TECH MULTISPAN 9" W CLEATED INCLINE CONVEYOR - USED SPAN TECH MULTISPAN CLEATED INCLINE CONVEYOR WITH: MODEL:MULTISPAN CONVEYOR WIDTH: 9 INCHES INFEED LENGTH: 87 INCHES INFEED HEIGHT: 13 INCHES DISCHARGE HEIGHT: 36.5 INCHES .75 HORSEPOWER MOTOR CLEAT CENTERS: 12 INCHES CLEAT WIDTH: 9 INCHES CLEAT HEIGHT: 2.25 INCHES MILD STEEL FRAME
|
🔒 Subscribe | |
|
|
PIZZAMATIC | SMOOTH TOP CONVEYOR |
[26" W] PIZZAMATIC SMOOTH TOP CONVEYOR 180 DEGREE CONVEYOR WIDTH: 26 INCHES 180 DEGREE TURN SMOOTH TOP CONVEYOR BELT STAINLESS STEEL CONSTRUCTION VARIABLE FREQUENCY DRIVE WELDED TUBULAR FRAME CASTERS
|
🔒 Subscribe | |
|
|
PIZZAMATIC | SMOOTH TOP CONVEYOR |
PIZZAMATIC SMOOTH TOP CONVEYOR 180 DEGREE 26" W - USED PIZZAMATIC SMOOTH TOP CONVEYOR WITH: CONVEYOR WIDTH: 26 INCHES 180 DEGREE TURN STAINLESS STEEL CONSTRUCTION VARIABLE FREQUENCY DRIVE WELDED TUBULAR FRAME CASTERS S/N:06PZKC115
|
🔒 Subscribe | |
|
|
COZZINI | CBC 25B |
COZZINI CBC 25B BRANDING CONVEYOR WITH: CONVEYOR DIMENSIONS: 40 INCHES WIDE X 120 INCHES LONG CONVEYOR HEIGHT: 36 INCHES STAINLESS STEEL WIRE MESH CONVEYOR BELT 1 HORSEPOWER MOTOR STAINLESS STEEL, SEALED MOTOR HOUSING STAINLESS STEEL CONSTRUCTION HUBBELL POWER DISCONNECT SWITCHES DRIP CATCH PAN CASTERS S/N: P9002-08-31105
|
🔒 Subscribe | |
|
|
FORDERTECHNIK | APRF40K |
FORDERTECHNIK PRODUCT STACKING CONVEYOR 12" WIDE - USED FORDERTECHNIK PRODUCT STACKING CONVEYOR WITH: TRAY SINGULATING AND STACKING MACHINE CONVEYOR DIMENSIONS 12 INCHES WIDE X 10 FEET LONG STAINLESS STEEL CONSTRUCTION PREVIOUSLY USED WITH SIGMA EQUIPMENT J8790 AND J8791 AS PART OF AN INFEED SYSTEM FOR A BOSCH KLIKLOK ENTERPRISE HORIZONTAL CARTONER
|
🔒 Subscribe | |
|
|
WELDOTRON | 6401 |
WELDOTRON 6401 MANUAL L-BAR SEALER WITH: MAXIMUM FILM WIDTH: 22 INCHES POWERED PACKAGE DISCHARGE CONVEYOR SURFACE FILM UNWIND ADJUSTABLE HEAT CONTROL AUTOMATIC SEAL TEMPERATURE COMPENSATOR AUTOMATIC CYCLE TIMING QUICK-ADJUST SEALING PLATFORM HEAVY DUTY CONSTRUCTION S/N: FV85264
|
🔒 Subscribe | |
|
|
CHAIN PALLET TRANSFER CONVEYOR 102"L X 48"W - USED CHAIN PALLET TRANSFER CONVEYOR WITH: CONVEYOR DIMENSIONS: 102 INCHES LONG X 48 INCHES WIDE DIASTANCE BETWEEN CHAINS: 3.5 INCHES CONVEYOR HEIGHT: 18 INCHES .5 HORSEPOWER MOTOR PAINTED, MILD STEEL CONSTRUCTION
|
🔒 Subscribe | |||
|
|
THIELE | 34-000 |
USED THIELE 34-000 ROTARY PICK AND PLACE FEEDER WITH: MODEL:34-000 ROTARY OUT-SERTER/TOP-SERTER PLACE OUTPUT: SPEEDS DEPEND ON PRODUCT SIZE COUPONS: UP TO 600 CYCLES PER MINUTE TRAYS OR PLATES: UP TO 200 CYCLES PER MINUTE PRODUCT SIZE RANGE: MAY REQUIRE OEM CHANGE PARTS COUPONS: 1 INCH X 1 INCH TO 6 INCHES X 6 INCHES TRAYS OR PLATES: 2 INCHES X 2 INCHES X .25 INCHES DEEP TO 5 INCHES X 6 INCHES X 1 INCH DEEP FITS OVER AN EXISTING CONVEYOR LINE TIMING SCREW
|
🔒 Subscribe | |
|
|
REEL-TO-REEL |
LABEL TRANSFER SYSTEM - USED LABEL TRANSFER SYSTEM WITH: TRANSFERS A ROLL OF LABELS FROM ONE REEL TO ANOTHER CORE DIAMETER: 2.75 INCHES MAXIMUM LABEL REEL DIAMETER: 14 INCHES VARIABLE SPEED
|
🔒 Subscribe | ||
|
|
LABEL-AIRE | 2144CD |
[2144CD] LABEL-AIRE SPOT PRESSURE SENSITIVE LABELER RIGHT HAND PREVIOUSLY USED FOR LABELING CD CASES LABEL DIMENSIONS: 4 INCHES LONG X 2 INCHES WIDE TAMP-ARM WITH LABEL BLOW STAND MOUNTED WITH CASTERS ADJUSTABLE HEIGHT
|
🔒 Subscribe | |
|
|
FORTRESS | PHANTOM |
FORTRESS PHANTOM 5X10 REVERSE METAL DETECTOR HEAD - USED FORTRESS PHANTOM 5" X 10" METAL DETECTOR HEAD ONLY WITH: APERTURE DIMENSIONS: 10 INCHES WIDE X 5 INCHES TALL. THIS IS A REVERSE SET-UP DETECTOR. THIS UNIT IS DESIGNED TO REJECT IF THERE IS NO METAL.
|
🔒 Subscribe | |
|
|
HYTROL | 180" L X 43" W |
[HYTROL CONVEYOR] PALLET SCALE CONVEYOR SYSTEM WITH: CONVEYOR DIMENSIONS: 180 INCHES LONG X 43 INCHES WIDE CONVEYOR HEIGHT: APPROXIMATELY 16 INCHES (3) .75 HORSEPOWER MOTORS 3 STRAND CHAIN CONVEYOR BELTS PROXIMITY SENSORS AVERY WEIGH TRONIX ZM303-SD1 SCALE CONTROL
|
🔒 Subscribe | |
|
|
VONGAL | 84 INCH L X 37 INCH W CHAIN PALLET CONVEYOR |
VONGAL 84 INCH L X 37 INCH W CHAIN PALLET CONVEYOR - USED VONGAL CHAIN PALLET CONVEYOR WITH: CONVEYOR DIMENSIONS: 84 INCHES WIDE X 37 INCHES LONG CONVEYOR HEIGHT: 29.5 INCHES 1.5 HORSEPOWER MOTOR PAINTED, MILD STEEL CONSTRUCTION HUBBELL POWER DISCONNECT SWITCH ADJUSTABLE LEGS
|
🔒 Subscribe | |
|
|
SAFELINE | 6" WIDE X 3" TALL GRAVITY METAL DETECTOR |
SAFELINE 6" WIDE X 3" TALL GRAVITY METAL DETECTOR - USED SAFELINE GRAVITY METAL DETECTOR WITH: APERTURE DIMENSIONS: 6 INCHES WIDE X 3 INCHES TALL MODULE SERIAL NUMBER: 011886 300 KHZ SLIDE WIDTH: 5.5 INCHES STAINLESS STEEL PRODUCT CATCH PAN
|
🔒 Subscribe | |
|
|
SHANKLIN | T-6XL |
SHANKLIN T-6XL HEAT SHRINK TUNNEL 18" W X 7" T - USED SINGLE CHAMBER HEAT TUNNEL WITH: MODEL:T-6XL WIRE ROD CONVEYOR 57.5 INCH LENGTH X 11.25 INCH WIDTH CONVEYOR ELEVATION 39 INCHES FROM GROUND TUNNEL APERTURE 30.5 INCH LENGTH X 18 INCH WIDTH X 7 INCH HEIGHT TEMPERATURE CONTROL VARIABLE SPEED SINGLE CHAMBER LESSON .75 HORSEPOWER ELECTRIC MOTOR CONTROL BLOWER FAN
|
🔒 Subscribe | |
|
|
FEDCO | SA 40 CA |
FEDCO SA 40 CA STAINLESS TOPPING INGREDIENT FEEDER WITH: TOPPING APPLICATOR/INGREDIENT FEEDER HOPPER DIMENSIONS: 14.5 INCHES X 15 INCHES X 12 INCHES DEEP THROAT DEPTH: 25 INCHES CANTILEVERED FRAME, DESIGNED TO SIT OVER AN EXISTING CONVEYOR LINE DISCHARGE DIMENSIONS: 8 INCHES WIDE X 7 INCHES LONG ADJUSTABLE FEED ROLL SPEED STAINLESS STEEL CONSTRUCTION CASTERS S/N: 99033
|
🔒 Subscribe | |
|
|
STAINLESS STEEL 3" W X 70" L TABLE-TOP CONVEYOR - USED STAINLESS STEEL CONVEYOR WITH: CONVEYOR DIMENSIONS: 3 INCHES WIDE X 70 INCHES LONG CONVEYOR HEIGHT: 37 INCHES 1 HORSEPOWER MOTOR STAINLESS STEEL FRAME SCREW DOWN LEVELING FEET
|
🔒 Subscribe | |||
|
|
SPAN TECH | S-CURVE |
S-CURVE CLEATED INCLINE CONVEYOR 14"W WITH: INFEED HEIGHT: 22 INCHES OUTFEED HEIGHT: 55.5 INCHES CONVEYOR WIDTH: 14.5 INCHES INFEED LENGTH: 40 INCHES INCLINE LENGTH: APPROXIMATELY 130 INCHES .5 HORSEPOWER MOTOR CLEAT CENTERS: 12 INCHES CLEAT HEIGHT: 1.25 INCHES CLEAT WIDTH: 9.5 INCHES STAINLESS STEEL CONSTRUCTION SCREW DOWN LEVELING FEET
|
🔒 Subscribe | |
|
|
CLEATED INCLINE CONVEYOR 8" WIDE X 72" DISCHARGE - USED CLEATED INCLINE CONVEYOR WITH: CONVEYOR WIDTH: 8 INCHES DISCHARGE HEIGHT: 71.5 INCHES HOPPER HEIGHT: 37 INCHES VARIABLE FREQUENCY DRIVE PAINTED STEEL CONSTRUCTION
|
🔒 Subscribe | |||
|
|
LEESON |
100" LONG X 6" WIDE SMOOTH TOP BELT CONVEYOR WITH: CONVEYOR DIMENSIONS: 100 INCHES LONG X 6 INCHES WIDE CONVEYOR HEIGHT: 37 INCHES STAINLESS STEEL FRAME CASTERS WASHDOWN LEESON MOTOR WITH SEALED MOTOR HOUSING .75/.5 HORSEPOWER MOTOR
|
🔒 Subscribe | ||
|
|
ATLASVAC | 1830S |
[ATLASVAC MEDICAL DEVICE SINGLE SHUTTLE TRAY SEALER] HEAT SEALING AREA: 30 LENGTH X 18 WIDTH (INCHES) TOOL NEST HEIGHT OPENING: UP TO 4.5 INCHES AIR REQUIREMENTS: 12 CUBIC FEET PER MINUTE 80 POUNDS PER SQUARE INCH ELECTRICALS: PHASE: 1 VOLTAGE: 240 AMPERAGE: 15 FREQUENCY: 60 HERTZ MOUNTED ON CASTERS OVERALL DIMENSIONS: 54 LENGTH X 48 WIDTH X 55 HEIGHT (INCHES) S/N: 55994
|
🔒 Subscribe | |
|
|
ATLAS VAC | 1830 |
USED ATLAS VAC MEDICAL DEVICE DUAL SHUTTLE TRAY SEALER WITH: DUAL SHUTTLE WITH PUSH BUTTON START/STOP CONTROLS ON EACH SIDE HEAT SEALING AREA: 30 LENGTH X 18 WIDTH (INCHES) TOOL HEIGHT OPENING: UP TO 4.5 INCHES AIR REQUIREMENTS: 12 CUBIC FEET PER MINUTE 80 POUNDS PER SQUARE INCH ELECTRICALS: PHASE: 1 VOLTAGE: 240 FREQUENCY: 60 HERTZ MOUNTED ON CASTERS OVERALL DIMENSIONS: 54 LENGTH X 75 WIDTH X 55 HEIGHT (INCHES) S/N: 54493B
|
🔒 Subscribe | |
|
|
CONFLEX | CW-160 |
CONFLEX CW-160 CLEAR FILM HORIZONTAL LAP SEALER - USED CONFLEX CW-160 HORIZONTAL LAP SEALER WITH: MODEL:CW-160 SERIAL:C0605228 SEAL BAR WIDTH: 16 INCHES MAXIMUM FILM WIDTH: 34 INCHES MAXIMUM FILM ROLL DIAMETER: 13 INCHES MAXIMUM OPERATING SPEEDS: 100 INCHES OF FILM PER MINUTE PACKAGE SIZE RANGE, MAY REQUIRE OEM CHANGE PARTS: MINIMUM: 3 INCHES LONG X 2 INCHES WIDE X .125 INCHES TALL MAXIMUM: 36 INCHES LONG X 15 INCHES WIDE X 5 INCHES TALL STAINLESS STEEL CONTACT PARTS EXTENDED LUGGED INFEED
|
🔒 Subscribe | |
|
|
DOBOY | CBS-CH |
DOBOY CBS-CH STAINLESS STEEL CONTINUOUS BAND BAG SEALER - USED DOBOY CBS-CH BAND SEALER WITH: CONTINUOUS, CHAIN-FED BAG SEALER DESIGNED FOR HEAVIER BAGS OUTPUT: UP TO 425 INCHES PER MINUTE - DEPENDING ON PRODUCT, BAG MATERIAL AND OPERATOR ABILITY SEAL WIDTH: .5 INCHES TWO SETS OF HEATING AND COOLING BARS ANGLED SEALING TILT DRIVE HEAD DIGITAL TEMPERATURE CONTROLS COMPATIBLE WITH PAPER OR PLASTIC BAGS RIGHT TO LEFT PRODUCT FLOW
|
🔒 Subscribe | |
|
|
BOSCH DOBOY | S-CH-S |
[BOSCH DOBOY S-CH-S] HIGH SPEED CONTINUOUS BAND BULK BAG SEALER WITH: MODEL:S-CH-S SERIAL:10-29767 SPEED: FROM 30 TO 75 FEET PER MINUTE, DEPENDING ON MATERIAL AND APPLICATION DIGITAL TEMPERATURE CONTROLLERS 30 INCH LONG HEALING SECTION WATER COOLING FOR STRONG SEALS AC VARIABLE DRIVE SPEED CONTROL TOOL-LESS SEALING BAND CHANGES SEE THROUGH LEXAN GUARD WITH SAFETY INTERLOCK STAINLESS STEEL, QPQ MELONITE, AND INDUSTRIAL PAINT FINISHES STANDARD SEAL WIDTH 1/4 INCHES RECOMMEND BAG THICKNESS: UP TO 8 MIL GUSSET BAGS SEALING HEIGHT IS ADJUSTABLE WITH HAND CRANK RANGING FROM 30-56 INCHES ELECTRICAL: VOLTS: 480, HERTZ: 60 PHASE: 3 APPLICATION: HIGH-SPEED, INDUSTRIAL, CONTINUOUS BAND SEALER DESIGNED FOR SEALING POLYETHYLENE, FOIL LAMINATES, POLY/TYVEK POUCHES, PAPER LAMINATES, AND ALMOST ANY HEAT SEALABLE MATERIAL
|
🔒 Subscribe | |
|
|
KOCH | ULTRASHRINK |
KOCH ULTRASHRINK STAINLESS STEEL SHRINK TUNNEL WITH: MAXIMUM BELT SPEED: UP TO 37 FEET PER MINUTE APERTURE OPENING: 28.75" W X 14" H INCHES CONVEYOR DIMENSIONS: 30" W X 31.14" L INCHES MAXIMUM PRODUCT HEIGHT: 12" INCHES DISCHARGE: 36 INCHES ELECTRICAL SUPPLY: 480 VOLTS 3 PHASE EASY SANITATION, REMOVABLE TRANSPORT CONVEYOR EMERGENCY STOP SWITCHES ELECTRIC OR STEAM HEATING AUTOMATIC WATER LEVEL CONTROL DIGITAL WATER TEMPERATURE CONTROL EASY ACCESS DRAINAGE SPOUT STAINLESS STEEL CONSTRUCTION S/N: 1003
|
🔒 Subscribe | |
|
|
WELDOTRON | 7121 |
WELDOTRON 7121 HEAT SHRINK TUNNEL TUNNEL APERTURE: 16 INCHES WIDE X 8 INCHES TALL 46 INCH LONG HEATING CHAMBER ROLLER CONVEYOR ANALOG TEMPERATURE CONTROL ON CASTERS FOR EASE OF MOBILITY OVERALL SIZE: 72 INCHES LONG X 22 INCHES WIDE X 60.5 INCHES TALL S/N: AR68671
|
🔒 Subscribe | |
|
|
SANCOA | RL3000L07 |
SANCOA RL3000L07 AUTOMATIC FRONT, SIDE AND BACK LABELER - USED SANCOA RL3000L07 FRONT AND BACK PRESSURE SENSITIVE ROTARY LABELER WITH: APPLICATION: FRONT, BACK, AND SIDE PANEL LABELS TO ONE GALLON LABEL DIMENSIONS: 2.25 WIDTH X 4.87 HEIGHT (INCHES) LABEL REELS: 18 INCH DIAMETER LABEL CORES: 3 INCH DIAMETER PEEL PLATE: 6 INCHES MAXIMUM SPEED: UP TO 220 BOTTLES PER MINUTE, DEPENDING ON MATERIALS AND APPLICATION AIR ACTUATED TOP HOLD DOWNS ON 11.6 INCH CENTERS RIGHT TO LEFT CONFIGURATION WORM SCREW INFEED TO STARWHEEL INFEED AND DISCHARGE PARKER DIGITAL TOUCH HMI STAINLESS STEEL CONSTRUCTION WITH ADJUSTABLE LEVELING FEET STAINLESS STEEL CONVEYOR FRAME TABLE TOP CHAIN: WIDTH: 6 INCHES AIR REQUIREMENTS: 2 CUBIC FEET PER MINUTE AT 80 POUNDS PER SQUARE INCH ELECTRICALS: 480 VOLTAGE / 3 PHASE / 60 HERTZ / 15 AMPERAGE LAST RUNNING: 1 GALLON PLASTIC BOTTLE WITH 3-PANEL LABEL S/N: 828-818-3437
|
🔒 Subscribe | |
|
|
QUADREL | ROTARY |
QUADREL ROTARY AUTO 3 STATION LABELER - USED QUADREL AUTOMATIC LABELER WITH: MODEL:ROTARY SERIAL:Q7001-001-002-003 SPEEDS: UP TO 400 CONTAINERS PER MINUTE, DEPENDING ON MATERIALS, APPLICATION AND CONFIGURATION CONSTRUCTION: STAINLESS STEEL THREE STATION AGGREGATES FOR LABELING FRONT AND BACK AND PARTIAL NECK OF BOTTLES PRESSURE SENSITIVE LABELING 30 HEAD MACHINE 2 IDENTICAL LABELERS SIDE BY SIDE INLINE ALLEN BRADLEY SLC 504 PLC WITH OPERATOR TOUCHSCREEN ELECTRICAL: PHASE: 3 FREQUENCY: 60 HERTZ VOLTAGE: 460 LAST RAN 12 OUNCE GLASS BOTTLES
|
🔒 Subscribe | |
|
|
SAFELINE | SL2000 |
10"W X 1"T INCLINE - USED SAFELINE SL2000 INCLINE METAL DETECTOR W INCLINE WITH: HINGED LEXON COVER REJECT: PNEUMATIC DIVERT PUSH ARM LIGHT REJECT ALARM REJECT CONVEYOR: LENGTH: 224 INCHES WIDTH: 10 INCHES MOTOR: 1725 RPM 115/230 VOLTS 1 PHASE 60 HZ WORKING HEIGHT: INFEED: 26 INCHES DISCHARGE: 89 INCHES ELECTRICS: 80 PSI 115 VOLTS 1 PHASE 60 HZ 20 AMPS S/N: 1988402
|
🔒 Subscribe | |
|
|
FORTRESS | PHANTOM |
FORTRESS PHANTOM METAL DETECTOR 4" T X 26" W - USED FORTRESS PHANTOM METAL DETECTOR WITH: MODEL:PHANTOM SERIAL:K-13336-12538 APERTURE: HEIGHT: 4 INCHES WIDTH: 26 INCHES BELT: WIDTH: 24 INCHES LENGTH: 62 INCHES DISCHARGE HEIGHT: 48 INCHES ELECTRICS: 100-120/200-240 VOLTS 60 HZ .5 AMPS
|
🔒 Subscribe | |
|
|
METTLER TOLEDO | V3 PW PPH PLUS 100/300 |
METTLER TOLEDO V3 PW PPH PLUS 100/300 METAL DETECTOR APERTURE: HEIGHT: 3.5 INCHES WIDTH: 23.5 INCHES BELT: WIDTH: 23.5 INCHES LENGTH: 60.5 INCHES DISCHARGE HEIGHT: 42.5 INCHES ELECTRICS: 80 PSI 115 VOLTS 60 HERTZ 2 AMPS S/N: 68428
|
🔒 Subscribe | |
|
|
FORTRESS | PHANTOM |
FORTRESS PHANTOM METAL DETECTOR HEAD ONLY WITH: APERTURE DIMENSIONS: 4 INCHES TALL X 20 INCHES WIDE PRODUCT PASSES VERTICALLY THROUGH THE METAL DETECTOR
|
🔒 Subscribe | |
|
|
RAMSEY | FORTRESS COMBO |
[20]" WIDE X [4]" TALL METAL DETECTOR APERTURE DIMENSIONS. [2.25]" EFFECTIVE APERTURE HEIGHT. [6] POUNDS MAXIMUM WEIGHING CAPACITY. [12]" WIDE X [114]" LONG TOTAL CONVEYOR DIMENSIONS. COMBINATION OF CHAIN CONVEYORS AND PLASTIC MAT-TOP CONVEYOR BELTS. [37]" CONVEYOR HEIGHT. [18]" WEIGHING AREA LENGTH. RIGHT TO LEFT PRODUCT FLOW. PUSH ARM PRODUCT REJECT. STAINLESS STEEL FRAME. SCREW DOWN LEVELING FEET.
|
🔒 Subscribe |
MAER NTN 20/12
PACKAGING EQUIPMENT
MAER NTN 20/12 NECK TO NECK PET BOTTLE TRIMMER WITH: SPIN TRIMMERS THAT ALLOW CUTTING THE DOME SHAR...
Hammer Price:
🔒
PACKAGING EQUIPMENT
[24" W X 13" T] STAINLESS STEEL STEAM SHRINK TUNNEL APERTURE DIMENSIONS: 24 INCHES WIDE X 13.5 INCHE...
Hammer Price:
🔒
SAFELINE POWERPLUS
FOOD PROCESSING AND RESTAURANT EQUIPMENT
19.5" X 5" SAFELINE POWERPLUS GRAVITY METAL DETECTOR WITH: APERTURE DIMENSIONS: 19.5 INCHES WIDE X 5...
Hammer Price:
🔒
GENERAL PROCESSING SYSTEMS INCLINE AUGER CONVEYOR
CHEMICAL PROCESSING EQUIPMENT
WITH: HOPPER DIMENSIONS: 53 INCHES WIDE X 42 INCHES LONG X 47 INCHES TALL INFEED HEIGHT: 96 INCHES O...
Hammer Price:
🔒
THERMO SCIENTIFIC APEX 500
PACKAGING EQUIPMENT
[2000-2030] THERMO SCIENTIFIC APEX 500 CHECKWEIGHER METAL DETECTOR COMBO - USED THERMO SCIENTIFIC CH...
Hammer Price:
🔒
DOBOY SUPER MUSTANG 1-UP
PACKAGING EQUIPMENT
[EQUIPMENT TYPE & SPECS] [SERIAL NUMBER]
DOBOY SUPER MUSTANG 1-UP SEAL JAW PRINT REGISTERED FLOW WRA...
Hammer Price:
🔒
ISHIDA CCW-Z-214W-S/30-WP
PACKAGING EQUIPMENT
ISHIDA CCW-Z-214W-S/30-WP STAINLESS STEEL COMPUTER COMBINATION SCALE - USED ISHIDA CCW-Z-214W-S/30-W...
Hammer Price:
🔒
FORTRESS SC-CONV-96SSH22FG
TEST, MEASUREMENT & QUALITY EQUIPMENT
FORTRESS SC-CONV-96SSH22FG INCLINE METAL DETECTOR WITH A 23"W X 2"H APERTURE. EFFECTIVE APERTURE DIM...
Hammer Price:
🔒
WEIGHPACK COMBI SCALE 14 HEAD
PACKAGING EQUIPMENT
WEIGHPACK 14 HEAD STAINLESS STEEL DIMPLED BUCKET COMBINATION SCALE - USED WEIGHPACK 14 HEAD DIMPLED ...
Hammer Price:
🔒
METTLER-TOLEDO V4-RAD
TEST, MEASUREMENT & QUALITY EQUIPMENT
[METTLER-TOLEDO V4-RAD] METAL DETECTOR WITH A 31" WIDE X 4" TALL APERTURE - USED METTLER-TOLEDO V4-R...
Hammer Price:
🔒
METTLER-TOLEDO V4-RAD
TEST, MEASUREMENT & QUALITY EQUIPMENT
METTLER-TOLEDO V4-RAD METAL DETECTOR WITH A 31" WIDE X 4" TALL APERTURE. APERTURE DIMENSIONS: WIDTH...
Hammer Price:
🔒
KLIKLOK/GENESIS GLC
PACKAGING EQUIPMENT
KLIKLOK/GENESIS GLC TOP LOAD CARTON GLUE SEALER WITH: CAPABLE OF SEALING TRI SEAL AND TOP LOAD CART...
Hammer Price:
🔒
SHANKLIN F-5A
PACKAGING EQUIPMENT
SHANKLIN F-5A HORIZONTAL FLOW THRU SIDE SEAL SHRINK WRAPPER WITH LUGGED INFEED - USED SHANKLIN F-5A ...
Hammer Price:
🔒
HINDS-BOCK 4P-64D
PACKAGING EQUIPMENT
[HINDS-BOCK 4P-64D] 4 HEAD STAINLESS STEEL INLINE PISTON FILLER - USED HINDS-BOCK 4 HEAD INLINE FILL...
Hammer Price:
🔒
SLIDELL FISCHBEIN VFN-9902
PACKAGING EQUIPMENT
[SLIDELL FISCHBEIN] BAG FILLING AND FILLING SYSTEM FOR FREE FLOWING PRODUCT SEMI-AUTOMATIC - OPERATO...
Hammer Price:
🔒
KODIAK 901-120
PACKAGING EQUIPMENT
KODIAK 901-120 HAND LOAD GLUE CARTONER 12" CENTERS - USED KODIAK 901-120 CARTONER WITH: OUTPUT: 20 T...
Hammer Price:
🔒
SPAN TECH MULTISPAN 9
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
SPAN TECH MULTISPAN 9" W CLEATED INCLINE CONVEYOR - USED SPAN TECH MULTISPAN CLEATED INCLINE CONVEYO...
Hammer Price:
🔒
PIZZAMATIC SMOOTH TOP CONVEYOR
FOOD PROCESSING AND RESTAURANT EQUIPMENT
[26" W] PIZZAMATIC SMOOTH TOP CONVEYOR 180 DEGREE CONVEYOR WIDTH: 26 INCHES 180 DEGREE TURN SMOOTH T...
Hammer Price:
🔒
PIZZAMATIC SMOOTH TOP CONVEYOR
FOOD PROCESSING AND RESTAURANT EQUIPMENT
PIZZAMATIC SMOOTH TOP CONVEYOR 180 DEGREE 26" W - USED PIZZAMATIC SMOOTH TOP CONVEYOR WITH: CONVEYO...
Hammer Price:
🔒
COZZINI CBC 25B
FOOD PROCESSING AND RESTAURANT EQUIPMENT
COZZINI CBC 25B BRANDING CONVEYOR WITH: CONVEYOR DIMENSIONS: 40 INCHES WIDE X 120 INCHES LONG CONVEY...
Hammer Price:
🔒
FORDERTECHNIK APRF40K
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
FORDERTECHNIK PRODUCT STACKING CONVEYOR 12" WIDE - USED FORDERTECHNIK PRODUCT STACKING CONVEYOR WITH...
Hammer Price:
🔒
WELDOTRON 6401
PACKAGING EQUIPMENT
WELDOTRON 6401 MANUAL L-BAR SEALER WITH: MAXIMUM FILM WIDTH: 22 INCHES POWERED PACKAGE DISCHARGE CON...
Hammer Price:
🔒
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
CHAIN PALLET TRANSFER CONVEYOR 102"L X 48"W - USED CHAIN PALLET TRANSFER CONVEYOR WITH: CONVEYOR DIM...
Hammer Price:
🔒
THIELE 34-000
PACKAGING EQUIPMENT
USED THIELE 34-000 ROTARY PICK AND PLACE FEEDER WITH: MODEL:34-000 ROTARY OUT-SERTER/TOP-SERTER PLAC...
Hammer Price:
🔒
REEL-TO-REEL
PACKAGING EQUIPMENT
LABEL TRANSFER SYSTEM - USED LABEL TRANSFER SYSTEM WITH: TRANSFERS A ROLL OF LABELS FROM ONE REEL TO...
Hammer Price:
🔒
LABEL-AIRE 2144CD
PACKAGING EQUIPMENT
[2144CD] LABEL-AIRE SPOT PRESSURE SENSITIVE LABELER RIGHT HAND PREVIOUSLY USED FOR LABELING CD CASES...
Hammer Price:
🔒
FORTRESS PHANTOM
PACKAGING EQUIPMENT
FORTRESS PHANTOM 5X10 REVERSE METAL DETECTOR HEAD - USED FORTRESS PHANTOM 5" X 10" METAL DETECTOR H...
Hammer Price:
🔒
HYTROL 180" L X 43" W
PACKAGING EQUIPMENT
[HYTROL CONVEYOR] PALLET SCALE CONVEYOR SYSTEM WITH: CONVEYOR DIMENSIONS: 180 INCHES LONG X 43 INCHE...
Hammer Price:
🔒
VONGAL 84 INCH L X 37 INCH W CHAIN PALLET CONVEYOR
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
VONGAL 84 INCH L X 37 INCH W CHAIN PALLET CONVEYOR - USED VONGAL CHAIN PALLET CONVEYOR WITH: CONVEYO...
Hammer Price:
🔒
SAFELINE 6" WIDE X 3" TALL GRAVITY METAL DETECTOR
TEST, MEASUREMENT & QUALITY EQUIPMENT
SAFELINE 6" WIDE X 3" TALL GRAVITY METAL DETECTOR - USED SAFELINE GRAVITY METAL DETECTOR WITH: APERT...
Hammer Price:
🔒
SHANKLIN T-6XL
PACKAGING EQUIPMENT
SHANKLIN T-6XL HEAT SHRINK TUNNEL 18" W X 7" T - USED SINGLE CHAMBER HEAT TUNNEL WITH: MODEL:T-6XL W...
Hammer Price:
🔒
FEDCO SA 40 CA
FOOD PROCESSING AND RESTAURANT EQUIPMENT
FEDCO SA 40 CA STAINLESS TOPPING INGREDIENT FEEDER WITH: TOPPING APPLICATOR/INGREDIENT FEEDER HOPPER...
Hammer Price:
🔒
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
STAINLESS STEEL 3" W X 70" L TABLE-TOP CONVEYOR - USED STAINLESS STEEL CONVEYOR WITH: CONVEYOR DIMEN...
Hammer Price:
🔒
SPAN TECH S-CURVE
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
S-CURVE CLEATED INCLINE CONVEYOR 14"W WITH: INFEED HEIGHT: 22 INCHES OUTFEED HEIGHT: 55.5 INCHES CON...
Hammer Price:
🔒
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
CLEATED INCLINE CONVEYOR 8" WIDE X 72" DISCHARGE - USED CLEATED INCLINE CONVEYOR WITH: CONVEYOR WIDT...
Hammer Price:
🔒
LEESON
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
100" LONG X 6" WIDE SMOOTH TOP BELT CONVEYOR WITH: CONVEYOR DIMENSIONS: 100 INCHES LONG X 6 INCHES W...
Hammer Price:
🔒
ATLASVAC 1830S
PACKAGING EQUIPMENT
[ATLASVAC MEDICAL DEVICE SINGLE SHUTTLE TRAY SEALER] HEAT SEALING AREA: 30 LENGTH X 18 WIDTH (INCHES...
Hammer Price:
🔒
ATLAS VAC 1830
PACKAGING EQUIPMENT
USED ATLAS VAC MEDICAL DEVICE DUAL SHUTTLE TRAY SEALER WITH: DUAL SHUTTLE WITH PUSH BUTTON START/STO...
Hammer Price:
🔒
CONFLEX CW-160
PACKAGING EQUIPMENT
CONFLEX CW-160 CLEAR FILM HORIZONTAL LAP SEALER - USED CONFLEX CW-160 HORIZONTAL LAP SEALER WITH: MO...
Hammer Price:
🔒
DOBOY CBS-CH
PACKAGING EQUIPMENT
DOBOY CBS-CH STAINLESS STEEL CONTINUOUS BAND BAG SEALER - USED DOBOY CBS-CH BAND SEALER WITH: CONTI...
Hammer Price:
🔒
BOSCH DOBOY S-CH-S
PACKAGING EQUIPMENT
[BOSCH DOBOY S-CH-S] HIGH SPEED CONTINUOUS BAND BULK BAG SEALER WITH: MODEL:S-CH-S SERIAL:10-29767 S...
Hammer Price:
🔒
KOCH ULTRASHRINK
PACKAGING EQUIPMENT
KOCH ULTRASHRINK STAINLESS STEEL SHRINK TUNNEL WITH: MAXIMUM BELT SPEED: UP TO 37 FEET PER MINUTE AP...
Hammer Price:
🔒
WELDOTRON 7121
PACKAGING EQUIPMENT
WELDOTRON 7121 HEAT SHRINK TUNNEL TUNNEL APERTURE: 16 INCHES WIDE X 8 INCHES TALL 46 INCH LONG HEATI...
Hammer Price:
🔒
SANCOA RL3000L07
PACKAGING EQUIPMENT
SANCOA RL3000L07 AUTOMATIC FRONT, SIDE AND BACK LABELER - USED SANCOA RL3000L07 FRONT AND BACK PRESS...
Hammer Price:
🔒
QUADREL ROTARY
PACKAGING EQUIPMENT
QUADREL ROTARY AUTO 3 STATION LABELER - USED QUADREL AUTOMATIC LABELER WITH: MODEL:ROTARY SERIAL:Q70...
Hammer Price:
🔒
SAFELINE SL2000
TEST, MEASUREMENT & QUALITY EQUIPMENT
10"W X 1"T INCLINE - USED SAFELINE SL2000 INCLINE METAL DETECTOR W INCLINE WITH: HINGED LEXON COVER ...
Hammer Price:
🔒
FORTRESS PHANTOM
TEST, MEASUREMENT & QUALITY EQUIPMENT
FORTRESS PHANTOM METAL DETECTOR 4" T X 26" W - USED FORTRESS PHANTOM METAL DETECTOR WITH: MODEL:PHAN...
Hammer Price:
🔒
METTLER TOLEDO V3 PW PPH PLUS 100/300
FOOD PROCESSING AND RESTAURANT EQUIPMENT
METTLER TOLEDO V3 PW PPH PLUS 100/300 METAL DETECTOR APERTURE: HEIGHT: 3.5 INCHES WIDTH: 23.5 INCHE...
Hammer Price:
🔒
FORTRESS PHANTOM
TEST, MEASUREMENT & QUALITY EQUIPMENT
FORTRESS PHANTOM METAL DETECTOR HEAD ONLY WITH: APERTURE DIMENSIONS: 4 INCHES TALL X 20 INCHES WIDE...
Hammer Price:
🔒
RAMSEY FORTRESS COMBO
FOOD PROCESSING AND RESTAURANT EQUIPMENT
[20]" WIDE X [4]" TALL METAL DETECTOR APERTURE DIMENSIONS. [2.25]" EFFECTIVE APERTURE HEIGHT. [6] PO...
Hammer Price:
🔒