Warehouse Liquidation of industrial equipment and parts including CNC SMT PCB Test Measurement Inspection Lab and Commercial Kitchen

RETHINK ROBOTICS BAXTER DUAL-ARM ROBOT 2X 7 DOF ARMS W/ PEDESTAL (1) RETHINK BAXTER COBOT ON PEDESTAL MANUFACTURER: RETHINK ROBOTICS MODEL: BR-01 BAXTER DUAL-ARM COBOT P/N: 00012541 (2) ROBOTIC ARMS WITH (7) DEGREES OF FREEDOM EACH BP-01 ROLL-AROUND PEDESTAL/BASE HAS ADJUSTABLE FEET DESIGNED FOR INDUSTRIAL USE, POPULUAR AS A ROBOTICS TEACHING AID SAFE BY DESIGN, FOR WORKING NEAR HUMANS WITHOUT CAGING TRAINED, NOT PROGRAMMED, FOR FASTER SETUP FORCE-SENSING JOINTS ZERO-G MODE FOR EASY HUMAN-GUIDED MOTION AND TEACHING CAMERA AND INFRARED DISTANCE SENSOR IN EACH CUFF CONDITION RING GIVES RED/GREEN COLOR-CODED STATUS AT A GLANCE ATTENTION RING SHOWS WHERE BAXTER SENSES YOU NEARBY COLOR LCD DISPLAY "FACE" NAVIGATOR INTERFACE CONTROLS ON EACH ARM AND EACH SIDE OF THE CHASSIS DISPLAY CAN SWIVEL THROUGH 180O TO FACE USERS CAMERA MOUNTED OVER THE DISPLAY 5LBS MAXIMUM PAYLOAD MAXIMUM REACH 1210 MM SINGLE-PHASE AC POWER INPUT 90-264V 47-63HZ 6A MAXIMUM THIS COBOT IS IN GOOD WORKING CONDITION. WE RAN THE BASIC CALIBRATION AND SPRING CALIBRATION PROGRAMS WITHOUT ANY DIFFICULTIES. WE VERIFIED ALL AXES WILL MOVE BOTH DURING THEIR AUTOMATIC WAKE-UP SEQUENCE AS WELL AS WITH USE OF THE ZERO-G MODE TRAINING CUFFS. THE HEAD SWIVELS PROPERLY AS WELL AND THE CONTROL INTERFACE STATIONS ALL WORKED AS EXPECTED.

RETHINK ROBOTICS BR-01 BAXTER DUAL-ARM ROBOT 2X 7 DOF ARMS + VACUUM END EFFECTOR KITS (1) RETHINK BR-01 BAXTER COBOT (5) 00038636 END EFFECTOR BASES MISCELLANEOUS ACCESSORIES AS SHOWN FOR DIY VACUUM END EFFECTORS MANUFACTURER: RETHINK ROBOTICS MODEL: BR-01 BAXTER DUAL-ARM COBOT P/N: 00012541 (2) ROBOTIC ARMS WITH (7) DEGREES OF FREEDOM EACH DESIGNED TO BE BOLTED TO A BENCH OR PEDESTAL DESIGNED FOR INDUSTRIAL USE, POPULAR AS A ROBOTICS TEACHING AID SAFE BY DESIGN, FOR WORKING NEAR HUMANS WITHOUT CAGING TRAINED, NOT PROGRAMMED, FOR FASTER SETUP FORCE-SENSING JOINTS ZERO-G MODE FOR EASY HUMAN-GUIDED MOTION AND TEACHING CAMERA AND INFRARED DISTANCE SENSOR IN EACH CUFF CONDITION RING GIVES RED/GREEN COLOR-CODED STATUS AT A GLANCE ATTENTION RING SHOWS WHERE BAXTER SENSES YOU NEARBY COLOR LCD DISPLAY "FACE" NAVIGATOR INTERFACE CONTROLS ON EACH ARM AND EACH SIDE OF THE CHASSIS DISPLAY CAN SWIVEL THROUGH 180O TO FACE USERS CAMERA MOUNTED OVER THE DISPLAY 5LBS MAXIMUM PAYLOAD MAXIMUM REACH 1210 MM SINGLE-PHASE AC POWER INPUT 100-240V 50-60HZ 6A MAXIMUM THIS COBOT IS IN GOOD WORKING CONDITION. WE RAN THE BASIC CALIBRATION AND SPRING CALIBRATION PROGRAMS WITHOUT ANY DIFFICULTIES. WE VERIFIED ALL AXES WILL MOVE BOTH DURING THEIR AUTOMATIC WAKE-UP SEQUENCE AS WELL AS WITH USE OF THE ZERO-G MODE TRAINING CUFFS. THE HEAD SWIVELS PROPERLY AS WELL AND THE CONTROL INTERFACE STATIONS ALL WORKED AS EXPECTED.

1998 MORGAN INDUSTRIES, INC G-100T PLASTIC INJECTION MOLDING MACHINE WITH PRE-HEAT PLATE 120V PLASTIC INJECTION MOLDING PRESS IDEAL FOR LOW VOLUME/PROTOTYPE WORK WITH 600W PRE-HEATING PLATE, KEEPS MOLDS HOT MEDIA CAPACITY: 6 CUBIC INCHES (4 OUNCES) MAXIMUM SINGLE SHOT CLAMPING PRESSURE: 20 TONS MAXIMUM INJECTION PRESSURE: 13,500 PSI MAXIMUM FACILITY REQUIREMENTS: 120V 20A PLUS COMPRESSED AIR PRESSURE GAUGES FOR CLAMP AND INJECTION AIR-DRIVEN CLAMP HAS POWERED-OPENING STROKE PREVIOUS OWNER HAD A STAND FABRICATED, CONTROLS ARE WAIST-HIGH, MOLD AREA IS CHEST-HIGH. THIS PRESS IS IN GOOD WORKING CONDITION. WE VERIFIED IT WILL GO UP/DOWN, CLAMP AND RELEASE, AND INJECT PLASTIC. THE PREHEATER HEATS, AND THE DIGITAL TEMPERATURE CONTROLLERS BOTH COME UP TO TEMPERATURE AS EXPECTED.

AGILENT B2902A PRECISION SOURCE/MEASURE UNIT 100FA TO 10A, 100NV TO 210V MANUFACTURER: KEYSIGHT MODEL: B2902A PRECISION SOURCE/MEASURE UNIT (SOURCEMETER) FIVE INSTRUMENTS IN ONE: VOLTAGE/CURRENT SOURCE, MEASURE CURRENT/VOLTAGE/RESISTANCE 2 CHANNELS (FRONT AND REAR) CURRENTS FROM AMPS TO FEMTOAMPS VOLTAGES FROM MICROVOLTS TO 210V COLOR LCD DISPLAY WITH SINGLE, DUAL, GRAPH OR ROLL VIEWING MODES FOUR-QUADRANT SINK/SOURCE OPERATION MAXIMUM POWER: 31.8W MAXIMUM DC VOLTAGE AND CURRENT RANGES: 210V, 0.105A (PULSES TO 200V, 1.515A) 21V 1.515A 6V 3.03A (PULSES TO 10A) PROGRAMMING RESOLUTIONS: 200MV RANGE, 1V 200V RANGE, 100V 100NA RANGE, 1PA 3A RANGE, 100A MEASUREMENT RESOLUTIONS: 200MV RANGE, 100NV 200V RANGE, 100V 100NA RANGE, 100FA 3A RANGE, 10A 2 RANGE, 1 100M RANGE, 100 MINIMUM PULSE WIDTH: 50S OVERTEMPERATURE PROTECTED AUTOMATIC FAN SPEED DIGITAL I/O OR LXI TRIGGERING 2- OR 4-WIRE SENSING GROUNDED OR FLOATING OUTPUT SWEEP CAPABILITY: LIN, LOG, OR LIST, SINGLE OR DOUBLE DIRECTION, DC OR PULSE, 1 TO 100,000 STEPS INTERFACES: IEEE-488 GP-IB, ETHERNET, USB, AND DIGITAL I/O CONFIGURABLE FOR REMOTE SAFETY INTERLOCKS SCPI PROGRAMMABLE LXI COMPLIANT THIS SMU IS IN PARTIAL WORKING CONDITION. THE DISPLAY AND CONTROLS WORK AS EXPECTED. IT WAS ABLE TO PERFORM ITS SELF-TEST AND SELF-CALIBRATION ROUTINES WITHOUT GIVING ERRORS. FROM 210V TO MILLIVOLT OUTPUTS, THE INDICATED OUTPUT MATCHES OUR METER PRETTY WELL (BELOW MILLIVOLTS, OUR CABLES INDUCED TOO MUCH NOISE). THE REASON THIS IS LISTED FOR SALE , IN NEED OF REPAIR IS THAT THE CURRENT OUTPUT IS WACKY. AT LOW CURRENTS UP TO 1.5A IT MATCHES OUR METER PRETTY WELL, BUT THE HIGH CURRENT/LOW VOLTS RANGE SOMEHOW FORGOT HOW TO MEASURE RIGHT. BOTH CHANNELS ARE CAPABLE OF SUPPLYING (AND SINKING) CURRENT, UP TO AND OVER 3A ... BUT THE SMU THINKS IT IS PROVIDING WRONG VOLTAGES, AND CALCULATES WRONG CURRENTS. BOTH FRONT AND REAR OUTPUTS GAVE 105MA AT 208V HIGH AND LOW VOLTAGE OUTPUTS WORK OK ACCORDING TO OUR METER

AGILENT B2902A PRECISION SOURCE/MEASURE UNIT 100FA TO 10A (1) AGILENT B2902A SMU MANUFACTURER: KEYSIGHT MODEL: B2902A PRECISION SOURCE/MEASURE UNIT (SOURCEMETER) FIVE INSTRUMENTS IN ONE: VOLTAGE/CURRENT SOURCE, MEASURE CURRENT/VOLTAGE/RESISTANCE 2 CHANNELS (FRONT AND REAR) CURRENTS FROM AMPS TO FEMTOAMPS VOLTAGES FROM MICROVOLTS TO 210V COLOR LCD DISPLAY WITH SINGLE, DUAL, GRAPH OR ROLL VIEWING MODES FOUR-QUADRANT SINK/SOURCE OPERATION MAXIMUM POWER: 31.8W MAXIMUM DC VOLTAGE AND CURRENT RANGES: 210V, 0.105A (PULSES TO 200V, 1.515A) 21V 1.515A 6V 3.03A (PULSES TO 10A) PROGRAMMING RESOLUTIONS: 200MV RANGE, 1V 200V RANGE, 100V 100NA RANGE, 1PA 3A RANGE, 100A MEASUREMENT RESOLUTIONS: 200MV RANGE, 100NV 200V RANGE, 100V 100NA RANGE, 100FA 3A RANGE, 10A 2 RANGE, 1 100M RANGE, 100 MINIMUM PULSE WIDTH: 50S OVERTEMPERATURE PROTECTED AUTOMATIC FAN SPEED DIGITAL I/O OR LXI TRIGGERING 2- OR 4-WIRE SENSING GROUNDED OR FLOATING OUTPUT SWEEP CAPABILITY: LIN, LOG, OR LIST, SINGLE OR DOUBLE DIRECTION, DC OR PULSE, 1 TO 100,000 STEPS INTERFACES: IEEE-488 GP-IB, ETHERNET, USB, AND DIGITAL I/O CONFIGURABLE FOR REMOTE SAFETY INTERLOCKS SCPI PROGRAMMABLE LXI COMPLIANT THIS SMU IS IN PARTIAL WORKING CONDITION. THE DISPLAY AND CONTROLS WORK AS EXPECTED. IT WAS ABLE TO PERFORM ITS SELF-TEST AND SELF-CALIBRATION ROUTINES WITHOUT GIVING ERRORS. FROM 210V TO MILLIVOLT OUTPUTS, THE INDICATED OUTPUT MATCHES OUR METER PRETTY WELL (BELOW MILLIVOLTS, OUR CABLES INDUCED TOO MUCH NOISE). THE CURRENT OUTPUT IS INCONSISTENT. AT LOW CURRENTS UP TO ABOUT 2A IT MATCHES OUR METER PRETTY WELL, BUT THE HIGH CURRENT/LOW VOLTS RANGE SOMEHOW FORGOT HOW TO MEASURE RIGHT. BOTH CHANNELS ARE CAPABLE OF SUPPLYING CURRENT ... BUT THE SMU THINKS IT IS PROVIDING WRONG VOLTAGES AND CALCULATES WRONG CURRENTS AT HIGH OUTPUT CURRENT. PICURE 4 SHOWS: BOTH CHANNELS MEASURE CLOSE TO OUR REFERENCE METER, ON OUR SHORT AND OUR 10K PRECISION RESISTOR. THE SMU RAN OUT OF COMPLIANCE ROOM AT 208V ON BOTH CHANNELS, BECAUSE OUR 2K RESISTOR IS ONLY 1.98K OOPS BOTH CHANNELS GIVE UNLOADED VOLTAGE OUTPUTS CLOSE TO OUR REFERENCE METER PICTURE 5 SHOWS: THE CALIBRATION REJECTION STICKER A 1 OHMS RESISTOR IS ABLE TO TAKE CURRENT AT LOW LEVELS CONNECTED DIRECTLY TO OUR METER, THE SMU COULD GIVE 3A NO PROBLEM WHEN LOADED WITH 1, BOTH CHANNELS CALL AN OVERFLOW FAILURE AT ABOUT 2A/2V EVEN THOUGH THERE SHOULD BE PLENTY OF HEADROOM

PVA 250 TABLE TOP FLUID OR SOLDER PASTE DISPENSER FULLY OPERATIONAL EXCELLENT CONDITION ABLE TO PROGRAM VIA PENDANT. OPTIONAL COMPUTER NOT INCLUDED. CART NOT INCLUDED

WALLAC OY (PERKIN ELMER) 2470-0020 WIZARD 2 AUTOMATIC GAMMA COUNTER. AUTOMATIC ROBOTIC SAMPLING (2) DETECTORS VERSION. HOLDS UP TO 550 SAMPLES. AUTOMATED DATA ANALYSIS. REQUIRES SERVICE. PERKIN ELMER 2470-0020 GAMMA COUNTER (1) 2470-9010-03 INSTRUMENT MANUAL (1) 2470-9030-02 SOFTWARE QUICK GUIDE (1) ID LABEL BINDER (2) BICRON I600-51051.26MW1.1969/1.12L-X DETECTORS WITH CUT CABLES (5) STYLUS PENS (1) USB KEY/DONGLE (1) WIZARD SOFTWARE DISC (1) DECANTING TOOL (1) PILE OF SCREWS

TEKTRONIX TCPA300 AC/DC CURRENT PROBE AMPLIFIER TESTED/WORKING BNC TEKPROBE (1) TEKTRONIX TCPA300 PROBE AMPLIFIER COMPATIBLE PROBES (NOT INCLUDED): TCP312/A, TCP305/A, TCP303 BNC OR TEKPROBE OUTPUT AC/DC MEASUREMENT CAPABILITIES: DC TO 100 MHZ, UP TO 150 AMPS DEPENDING ON PROBE IN USE AUTOMATIC SCALING AND UNITS AC OR DC COUPLING LOW INSERTION IMPEDANCE SPLIT-CORE CONSTRUCTION FOR EASY CIRCUIT CONNECTION VISUAL STATUS INDICATORS LOW DC DRIFT AND NOISE FAN COOLED POWER: 100240V, 47440HZ, 50W

TEKTRONIX TCP305 50A AC/DC DC TO 50 MHZ CURRENT PROBE FOR TCPA300 AMPLIFIER CURRENT PROBE BANDWIDTH: DC TO 50 MHZ CURRENT RANGE: TO 50 AMPS DC, 35.4A RMS SINE AUTOMATICALLY ENABLES 5A/V AND 10A/V RANGE ON TCPA300 RISE TIME: <7NS LOWEST MEASURABLE CURRENT: 5MA MAXIMUM WIRE VOLTAGE: 150V CAT II BARE, 300V CAT II INSULATED AC-COUPLING LOW-FREQUENCY BANDWIDTH -3DB: <7HZ SIGNAL DELAY TO BNC OUTPUT OF AMPLIFIER: 19NS INSERTION IMPEDANCE: 0.02? AT 1MHZ, 0.1? AT 10MHZ, 0.35? AT 50MHZ MAXIMUM CONDUCTOR SIZE: 5MM CABLE LENGTH: 1.5M THIS CURRENT PROBE WAS GIVEN A QUICK CHECK ON OUR TCPA300 AND GAVE APPROPRIATE READINGS. THE AMPLIFIER DETECED WHEN THE HEAD WAS OPENED. THE PROBE WAS ABLE TO DEGAUSS ITSELF WHEN THE BUTTON WAS PRESSED.

TDK-LAMBDA GENH 30-25 PROGRAMMABLE DC POWER SUPPLY 0-30V 0-25A GENH3025 ADJUSTABLE, REGULATED OUTPUT OUTPUT: 0-30V 0-25A, 750 WATTS RS-485/RS-232 SERIAL INTERFACE GPIB IEEE-488 INTERFACE P/N: 00507342 C/N: 03-600-0117 MD: GENH 30-25-IEMD-U REV.: Z "HALF-RACK" WIDE, 1U HIGH CONSTANT VOLTAGE/CONSTANT CURRENT AUTO-CROSSOVER REMOTE PROGRAMMABLE REMOTE SENSE CAPABLE COARSE AND FINE VOLTAGE AND CURRENT ADJUSTMENT REMOTE OR LOCAL CONTROL ADJUSTABLE OVER- AND UNDER-VOLTAGE LIMITS FOLDBACK LIMITING SELECTABLE OUTPUT ON/OFF AT FRONT PANEL BRIGHT GREEN LED VOLTAGE AND CURRENT DISPLAYS INTERNAL FAN COOLING, AUTOMATIC FAN SPEED CONTROL ACTIVE POWER FACTOR CORRECTED LAST-SETTING MEMORY

TDK-LAMBDA GENH 6-100 PROGRAMMABLE DC POWER SUPPLY 0-6V 0-100A GENH6100 (1) ADJUSTABLE, REGULATED OUTPUT OUTPUT: 0-6V 0-100A, 600 WATTS RS-485/RS-232 SERIAL INTERFACE GPIB IEEE-488 INTERFACE P/N: 00507310 C/N: 03-600-0096 MD: GENH 6-100-IEMD-U REV.: Z "HALF-RACK" WIDE, 1U HIGH CONSTANT VOLTAGE/CONSTANT CURRENT AUTO-CROSSOVER REMOTE PROGRAMMABLE REMOTE SENSE CAPABLE COARSE AND FINE VOLTAGE AND CURRENT ADJUSTMENT REMOTE OR LOCAL CONTROL ADJUSTABLE OVER- AND UNDER-VOLTAGE LIMITS FOLDBACK LIMITING SELECTABLE OUTPUT ON/OFF AT FRONT PANEL BRIGHT GREEN LED VOLTAGE AND CURRENT DISPLAYS INTERNAL FAN COOLING, AUTOMATIC FAN SPEED CONTROL ACTIVE POWER FACTOR CORRECTED LAST-SETTING MEMORY S/N: 03-600-0096

LEYBOLD D16AC ROTARY VANE DUAL STAGE VACUUM PUMP 1HP 1PHASE 115V 14CFM D16 AC TRIVAC DUAL-STAGE VACUUM PUMP POWER: 1 HORSEPOWER ROTARY VANE PUMP FOR USE ESPECIALLY WITH CHEMICAL AND OXIDIZING INFLUENCES PUMPING SPEED MAXIMUM DISPLACEMENT: 14.1 CFM ULTIMATE PRESSURE RATING: 0.3 MILLITORR ULTIMATE PRESSURE WITH GAS BALLAST: 3 MILLITORR WATER VAPOR TOLERANCE: 15 TORR OIL CAPACITY: 1 QUART INLET & OUTLET: KF25 GAS BALLAST VALVE HAS BEEN FITTED WITH A COMPRESSION FITTING FOR INERT GAS INJECTION MOTOR: GENERAL ELECTRIC 5KCR47UG26T POWER: 115/200-230V 60/50HZ 10.4/4.7A (WIRED FOR 115V CURRENTLY) THIS PUMP IS IN GOOD WORKING CONDITION.

KEYENCE SL-V28HM-T / SL-V28HM-R LIGHT CURTAIN TRANSMITTER AND RECEIVER ASSEMBLY SET 24VDC WORKING WHEN REMOVED FROM SERVICE.

AGILENT TECHNOLOGIES 6671A SYSTEM DC POWER SUPPLY 0-5V 0-250A OUT HP GPIB 230VIN OPTION #: J14 (LOWER VOLTAGE TO 5V, INCREASE CURRENT TO 250A) SINGLE OUTPUT 2KW RATED OUTPUT POWER INPUT: 220-240VAC 50/60HZ 19A OUTPUT: 0-5V 0-250A DC LOCAL CONTROL WITH FRONT PANEL KNOBS OR SOFT KEYS REMOTE CONTROL WITH HPIB REMOTE SENSE CAPABLE REAL-TIME DIGITAL OUTPUT VOLTAGE AND CURRENT METERS POWER CORD INCLUDED OUTPUT TERMINAL COVER INCLUDED MISSING ONE KNOB COSMETIC ISSUES THIS SUPPLY IS IN GOOD WORKING CONDITION. THE OUTPUT VOLTAGE MATCHES OUR MEASUREMENTS. THIS SUPPLY WAS ABLE TO DELIVER FULL RATED CURRENT AT AROUND 50MV. THE KEYPAD AND ADJUSTMENT KNOBS ALL WORK, EXCEPT THAT THE CURRENT KNOB NEEDS A FINGERTIP GRIP OR A STRAIGHT SCREWDRIVER TO ADJUST. THE DISPLAY IS CLEAR AND EASY TO READ. THE FAN SPED UP DURING HIGH POWER OPERATION.

GALIL DMC-1842 4-AXIS MOTION CONTROLLER CONTROL CARD BOARD PCI 100-PIN REV J (1) GALIL DMC-1842 MOTION CONTROLLER MANUFACTURER: GALIL MOTION CONTROL MODEL: DMC-1842 DMC-18X2 SERIES MOTION CONTROLLER CONTROL UP TO 4 AXES 32-BIT PCI INTERFACE. 64-BIT COMPATIBLE USER-CONFIGURABLE FOR STEPPER OR SERVO MOTORS ANY MOD OF MOTION CAN BE PROGRAMMED, INCLUDING: LINEAR INTERPOLATION CIRCULAR INTERPOLATION CONTOURING ELECTRONIC GEARING ECAM CAN DO ELLIPTICAL SCALING, SLOW-DOWN AROUND CORNERS, INFINITE SEGMENT FEED, AND FEED RATE OVERRIDE INPUTS/OUTPUTS ARE NOT OPTICALLY ISOLATED HOME INPUT AND FORWARD/REVERSE LIMITS ACCEPTED FOR EVERY AXIS 8 UNCOMMITTED INPUTS, 8 OUTPUTS 100-PIN SCSI CONNECTOR PID COMPENSATION THIS WAS REMOVED FROM A WORKING AGILENT 5DX SYSTEM.

TEKTRONIX P7506 6GHZ 4V TEKCONNECT TRIMODE VOLTAGE PROBE (1) TEK P7506 PROBE MANUFACTURER: TEKTRONIX MODEL: P7506 TEKCONNECT TRIMODE PROBE DIFFERENTIAL VOLTAGE PROBE BANDWIDTH: TO 6 GHZ VOLTAGE: TO 4 V SELECTABLE ATTENUATION

KEYENCE SL-V28H SAFETY LIGHT CURTAIN OPTICAL AXES TRANSMITTER / RECEIVER PAIR SAFETY LIGHT CURTAIN OPTICAL AXES TRANSMITTER / RECEIVER PAIR DETECTION CAPABILITY 0.98" 25 MM BEAM AXIS SPACING/LENS DIAMETER 20 MM/5 MM 0.79"/0.20" EFFECTIVE APERTURE ANGLE MAX. 2.5 (WHEN OPERATING DISTANCE IS 3 M 98.23' OR MORE) WORKING DISTANCE 0.1 TO 9 M RESPONSE TIME (MS) ONOFF 9.8*1 OFFON 49.8*1 LIGHT SOURCE INFRARED LED (850 NM) OPERATION MODE TURNS ON WHEN NO INTERRUPTIONS ARE PRESENT IN THE DETECTION ZONE (EXCLUDING WHEN THE MUTING FUNCTION IS USED) OSSD OUTPUT OUTPUT 2 OUTPUTS EACH FOR PNP AND NPN. CAN BE CHANGED BY USING THE CONNECTOR CABLE. MAX. LOAD CURRENT 500 MA*2 RESIDUAL VOLTAGE (DURING ON) MAX. 2.5 V (WITH A CABLE LENGTH OF 7 M 22.97') LEAKAGE CURRENT MAX. 100 A*3 MAX. CAPACITIVE LOAD 2.2 F (WITH A LOAD RESISTANCE OF 100 ?) LOAD WIRING RESISTANCE MAX. 2.5 ?*4 NON-SAFETY-RELATED OUTPUT AUX - OUTPUT WITH AUTOMATIC PNP/NPN SWITCHING FUNCTION, 50 MA MAX. INTERLOCK-RESET-READY OUTPUT ALARM OUTPUT CLEAR/BLOCKED OUTPUT STATE INFORMATION OUTPUT 1, 2 MUTING LAMP OUTPUT INCANDESCENT LAMP (24 VDC, 1 TO 7 W) OR LED LAMP (LOAD CURRENT: 10 TO 300 MA)*5 CAN BE CONNECTED INPUT EDM INPUT - SHORT-CIRCUIT CURRENT 10 MA WAIT INPUT - SHORT-CIRCUIT CURRENT 2.5 MA RESET INPUT - SHORT-CIRCUIT CURRENT 2.5 MA MUTING INPUT 1, 2 - SHORT-CIRCUIT CURRENT 2.5 MA OVERRIDE INPUT - SHORT-CIRCUIT CURRENT 2.5 MA PROTECTION CIRCUIT REVERSE CURRENT PROTECTION, SHORT-CIRCUIT PROTECTION FOR EACH OUTPUT, SURGE PROTECTION FOR EACH OUTPUT APPROVED STANDARDS EMC EMS IEC61496-1, EN61496-1, UL61496-1 EMI EN55011 CLASS A, FCC PART15B CLASS A SAFETY IEC61496-1, EN61496-1, UL61496-1 (TYPE 4 ESPE) IEC61496-2, UL61496-2, EN61496-2 (TYPE 4 AOPD) IEC61508 (SIL3), EN61508 (SIL3), IEC62061 (SIL3), EN ISO13849-1: 2015 (CATEGORY 4, PLE) UL508 UL1998 RATING POWER VOLTAGE 24 VDC +10 %, -20 %, RIPPLE (P-P) 10 % OR LESS CURRENT CONSUMPTION (MA) WHEN THE CENTER INDICATOR IS ON TRANSMITTER 87*6 RECEIVER 79*6 WHEN THE CENTER INDICATOR IS OFF TRANSMITTER 81*6 RECEIVER 69*6 ENVIRONMENTAL RESISTANCE ENCLOSURE RATING IP65 (IEC60529) OVERVOLTAGE CATEGORY II AMBIENT LIGHT INCANDESCENT LAMP: 5,000 LUX MAX., SUNLIGHT: 20,000 LUX MAX. OPERATING AMBIENT TEMPERATURE -10 TO +55 C 14 TO 131 F (NO FREEZING) STORAGE TEMPERATURE -25 TO +60 C -13 TO 140 F (NO FREEZING) OPERATING RELATIVE HUMIDITY 15 TO 85 % RH (NO CONDENSATION) STORAGE RELATIVE HUMIDITY 15 TO 95 % RH VIBRATION RESISTANCE 10 TO 55 HZ, DOUBLE AMPLITUDE 0.7 MM 0.03", 20 SWEEPS IN EACH OF THE X, Y, AND Z DIRECTIONS SHOCK RESISTANCE 100 M/S2 (APPROX. 10 G), 16 MS PULSE, 1,000 TIMES IN EACH OF THE X, Y, AND Z DIRECTIONS MATERIAL MAIN UNIT CASE ALUMINUM UPPER CASE/LOWER CASE ZINC DIE-CAST FRONT COVER POLYCARBONATE, SUS304 WEIGHT TRANSMITTER 400 G RECEIVER 415 G WORKING WHEN REMOVED FROM SERVICE.

OMRON MS46-30-2095X, MS46-R-2095-30 SAFETY LIGHT CURTAIN RECEIVER & TRANSMITTER SET 82.3"L (1) OMRON MINISAFE MS46-30-2095X SAFETY LIGHT CURTAIN TRANSMITTER 82.3" (1) OMRON MINISAFE MS46-R-2095-30 SAFETY LIGHT CURTAIN RECEIVER 82.3" LENGTH: 82.3" OPERATING RANGE: 0.3 TO 9 M (1 TO 30 FT) FOR 30 MM RESOLUTION MINIMUM OBJECT RESOLUTION: 30 MM RESPONSE TIME: <0.033 SECONDS INPUT VOLTAGE: 24 VDC +/-20% INPUT POWER: 14 WATTS LIGHT SOURCE: GA AIAS LIGHT EMITTING DIODE EFFECTIVE APERTURE ANGLE: +/- 2.5 DEGREES MAXIMUM, TRANSMITTER AND RECEIVER AT OPERATING RANGE GREATER THAN 3 M OPERATING TEMPERATURE: 0 TO 55 C INDICATORS: TRANSMITTER-POWER APPLIED, RECEIVER-MACHINE RUN, MACHINE STOP, INTERLOCK/FAULT, CHANNEL SELECT/FLOATING BLANKING, INDIVIDUAL BEAM CONNECTIONS: RECEIVER-8 PIN, TRANSMITTER-3-PIN STANDARD, 5-PIN WITH MTS PROTECTION: NEMA 4, 12, IP65 NO CABLE REQUIRED BETWEEN TRANSMITTER AND RECEIVER THE LIGHT CURTAIN SET WAS REMOVED FROM A WORKING MACHINE.

CARL ZEISS 1282-321 INTERFACE MODULE FOR ECU-LSM LASERMODUL V (1) ZEISS 1282-321 INTERFACE MODULE MANUFACTURER: CARL ZEISS TYPE: 1282-321 EPSA NR: 20042513 OTHER MARKINGS 1282-335 1282-322 1282-321 CONNECTIONS: EXT.CH 1, 2, 3, 4, LVDS, CH 1-8 REMOVED FROM A CARL ZEISS ECU-LSM 5 LIVE 1298-270 THIS WAS REMOVED FROM A WORKING ECU-LSM BOX.

CARL ZEISS 1282-324 CAN INTERFACE MODULE FOR ECU-LSM LASERMODUL V (1) ZEISS 1282-324 CAN INTERFACE MANUFACTURER: CARL ZEISS TYPE: 1282-324 EPSA NR: 20039987 OTHER MARKINGS 1282-312 20041585 1318-459 1314-134 CONNECTIONS: REMOTE POWER LAMP CAN (4 OF THESE) SAFETY EX (2 OF THESE) SM2 SM1 AUX2 AUX1 LM1 LM2 LM3 TUBE W-MIRROR STAND RS232/TEST THIS WAS REMOVED FROM A WORKING ECU-LSM BOX AND NOT TESTED SEPARATELY.

LEYBOLD D16AC TRIVAC DUAL-STAGE VACUUM PUMP. ROTARY VANE PUMP. FOR USE ESPECIALLY WITH CHEMICAL AND OXIDIZING INFLUENCES. FOR USE WITH PFPE OILS. PUMPING SPEED MAXIMUM DISPLACEMENT: 14.1 CFM. INLET & OUTLET: KF25. POWER: 208-230/460V 3PHASE 3.7/1.9A 50/60HZ. REQUIRES SERVICE.

IDEAL 45-930 STP SHIELDED TWISTED PAIR CABLE STRIPPING SYSTEM. AUTOMATICALLY ADJUSTS FOR CABLE SIZES UP TO 0.3125" DIAMETER. STRIP LENGTHS ARE ADJUSTABLE 1.25" TO 6". CYCLE TIME AS LITTLE AS 6 SECONDS. STORE UP TO 500 BATCH PROGRAMS. INTERLOCKED TO PREVENT OPERATION WITH THE COVER OPEN. FACILITY REQUIREMENTS: 115V 60HZ PLUS COMPRESSED AIR.

AKRO-MILS 30-164 STACKABLE STORAGE BINS MATERIAL: POLYPROPYLENE COLOR: (1) BLUE (1) RED OUTER LENGTH: 23.5" OUTER WIDTH: 6.625" OUTER HEIGHT: 4" INNER LENGTH: 22.375" INNER WIDTH:6.5" INNER HEIGHT: 4" (2) AKRO-MILS 30-164 23.5"X 6.625"X4" STACKABLE STORAGE BINS (1) BLUE (1) RED (2) AKRO-MILS 30-158 18"X8.25"X4" STACKABLE STORAGE BINS (1) BLUE (1) YELLOW (4) AKRO-MILS 30-170 11.5"X11.125"X4" STACKABLE STORAGE BINS (2) BLUE (1) YELLOW (1) RED AKRO-MILS 30-158 STACKABLE STORAGE BIN MATERIAL: POLYPROPYLENE COLOR: (1) YELLOW (1) BLUE OUTER LENGTH: 18" OUTER WIDTH: 8.25" OUTER HEIGHT: 4" INNER LENGTH: 16.75" INNER WIDTH: 7.625" INNER HEIGHT: 4" AKRO-MILS 30-170 STACKABLE STORAGE BINS MATERIAL: POLYPROPYLENE COLOR: (2) BLUE (1) YELLOW (1) RED OUTER LENGTH: 11.5" OUTER WIDTH: 11.125" OUTER HEIGHT: 4" INNER LENGTH: 10.5" INNER WIDTH: 10.5" INNER HEIGHT: 4"

AKRO-MILS 30-130 STACKABLE STORAGE BINS (10)BLUE(1)RED(1)YELLOW 11.5"X6.25"X4" (10) AKRO-MILS 30-130 BLUE STACKABLE STORAGE BINS 11.5"X6.25"X4" (1) AKRO-MILS 30-130 RED STACKABLE STORAGE BINS 11.5"X6.25"X4" (1) AKRO-MILS 30-130 YELLOW STACKABLE STORAGE BINS 11.5"X6.25"X4" MANUFACTURER: AKRO-MILS MODEL: 30-130 STACKABLE STORAGE BINS COLOR: (10)BLUE (1)RED (1)YELLOW MATERIAL: POLYPROPYLENE OUTER LENGTH: 11.5" OUTER WIDTH: 6.625" OUTER HEIGHT: 4" INNER LENGTH: 10.5" INNER WIDTH: 6.25" INNER HEIGHT: 4"

AKRO-MILS 30-174 STACKABLE STORAGE BINS 23.5"X11.25"X4" 4 BLUE/2 YELLOW (4) BLUE AKRO-MILS 30-174 STACKABLE BINS 23.5"X11.25"X4" (2) YELLOW AKRO-MILS 30-174 STACKABLE BINS 23.5"X11.25"X4" MATERIAL: POLYPROPYLENE COLOR: (4) BLUE (2) YELLOW OUTER LENGTH: 23.5" OUTER WIDTH: 11.25" OUTER HEIGHT: 4" INNER LENGTH: 22.375" INNER WIDTH: 10.75" INNER HEIGHT: 4"

(6) AKRO-MILS 30-124 BLUE STACKABLE STORAGE BINS 18"X4"X4" (9) AKRO-MILS 30-128 ASSORTED STACKABLE STORAGE BINS 23.5"X4"X4" (2)YELLOW (3)RED (4)BLUE MODEL: 30-128 STACKABLE STORAGE BINS COLOR: (3)RED (4)BLUE (2)YELLOW MATERIAL: POLYPROPYLENE OUTER LENGTH: 23.5" OUTER WIDTH: 4" OUTER HEIGHT: 4" INNER LENGTH: 22.375" INNER WIDTH: 3.625" INNER HEIGHT: 4" MODEL: 30-124 STACKABLE STORAGE BINS COLOR: BLUE MATERIAL: POLYPROPYLENE OUTER LENGTH: 18" OUTER WIDTH: 4" OUTER HEIGHT: 4" INNER LENGTH: 16.75" INNER WIDTH: 3.875 INNER HEIGHT: 4" THE BINS WERE REMOVED FROM A WORKING ENVIRONMENT. THE BINS STACK AND ARE FUNCTIONAL.

IDEAL ELECTRIC 308399 AT 2000-HP 3PH POLYPHASE INDUCTION MOTOR MCA1688 DRIPPROOF 3 PHASE 60 HZ CODE: F FRAME: MCA1688 TYPE: AT 2000 HP 2300 VOLTS 1782 RPM 448 / 493 AMPS DUTY: CONT SF: 1.15 CLASS INS.: B ENCLOSURE: DRIPPROOF WORKING WHEN REMOVED FROM SERVICE.

IDEAL 45-930 STP SHIELDED TWISTED PAIR CABLE STRIPPING SYSTEM: THERMAL/MECHANICAL SHIELDED TWISTED PAIR CABLE STRIPPER. AUTOMATICALLY ADJUSTS FOR CABLE SIZES UP TO 0.3125" DIAMETER. STRIP LENGTHS ARE ADJUSTABLE 1.25" TO 6". CYCLE TIME AS LITTLE AS 6 SECONDS. STORE UP TO 500 BATCH PROGRAMS. INTERLOCKED TO PREVENT OPERATION WITH THE COVER OPEN. FACILITY REQUIREMENTS: 115V 60HZ PLUS COMPRESSED AIR

PVA CONFORMAL COATING MACHINE. S/N: W1755

NEW BRUNSWICK EXCELLA E10 BENCHTOP OPEN AIR PLATFORM SHAKER W/ FLASK HOLDERS (1) NEW BRUNSWICK EXCELLA E10 BENCHTOP OPEN AIR PLATFORM SHAKER W/ FLASK HOLDERS. BENCHTOP PLATFORM SHAKER SPEED 50 RPM 400 RPM MOTION 2.54 CM (1 IN) INDICATION LED DIGITAL ELECTRIC DISPLAY, 1 RPM INCREMENTS SETPOINT AND CONTROL DIGITAL ADJUSTMENT WITH PI MICROPROCESSOR CONTROL AND INSTANTANEOUS VISUAL FEEDBACK 1 RPM. ACCURACY 2 RPM RUSTY. REQUIRES SERVICE OR TESTING.

1997 NEFF UNKNOWN 2-TON 3-PH HYDRAULIC BENCH PRESS SAFETY-CURTAINS ADJ-PRESS/SPEED 7"-TRAVEL S/N: 10665 TONNAGE: 2 TON / 2300 PSI RAM TRAVEL: 7" SAFETY LIGHT CURTAINS PRESSURE ADJUSTMENT PRESSURE GUAGE SPEED ADJUSTMENT OPERATING PRESSURE: 300 - 2300 PSI 2 HP 230/460VAC 60 HZ 3 PHASE REQUIRES SERVICE OR TESTING.

HOBART CL44E COMMERCIAL DISHWASHER 480V WITH 180F BOOSTER, 8' CLEAN DISH TABLE HOBART CL44E CONVEYOR DISHWASHER: 480V 3PHASE 60HZ 27.9A 22KW TANK HEATER, CLEANS UP TO 202 RACKS PER HOUR, OPTI-RINSE SYSTEM, INSULATED, INTERLOCKED, DOUBLE HINGE INSPECTION DOORS, THERMAL LAYER CURTAINS HELP KEEP HEAT INSIDE, EXHAUST REQUIREMENT: ENTRANCE 200CFM, DISCHARGE 400CFM, STAINLESS STEEL CONSTRUCTION, DRAIN STUB INCLUDED. HATCO MODEL S-27 IMPERIAL WATER HEATER: TEMPERATURE BOOSTER (UP TO 180OF), 16 GALLONS CAPACITY, RECOVERY RATES: 271 GPH @ 40OF RISE, 155 GPH @ 70F RISE, POWER: 480V 50-60HZ 3PHASE 27KW 32.5A, WITHOUT LCD. CLEAN DISH TABLE: UNBRANDED, 8' LONG, 6' X 1' SHELF ON TOP, SWITCH ON LEFT END SIGNALS THE DISHWASHER WHEN TABLE IS FULL, FOUR LEGS, WILL STAND ON ITS OWN.

CINCINNATI MILACRON 75-TON TOGGLE INJECTION MOLDING MACHINE RECIPRO SCREW DESIGN

HOVER-DAVIS MPUP01-6B FEEDER ADJUSTMENT CARTS FOR UNIVERSAL PICK & PLACE COMPONENT FEEDERS (6) ADJUSTMENT POSITIONS PER CART (6) LOWER-SHELF STORAGE POSITIONS PER CART VARIOUS SIZES OF FEEDERS: (7) 16 MM (14) 24 MM (3) 32 MM (2) 44 MM POWER: 110/220V 50/60HZ 220W PLUS COMPRESSED AIR POSSIBLY NOT WORKING,(2) HOVER-DAVIS MPUP01-6B FEEDER SETUP CARTS (3) UNIVERSAL 47175804 FEEDERS (4) UNIVERSAL 47175805 FEEDERS (2) UNIVERSAL 47175901 FEEDERS (1) UNIVERSAL 47175904 FEEDER (12) UNIVERSAL 47175905 FEEDERS (1) UNIVERSAL 47176003 FEEDER (2) UNIVERSAL 47176105 FEEDERS (2) UNIVERSAL 48497402 FEEDERS (1) COMPONENT EXPRESS CONVEYOR

HOBART HCM450 VERTICAL CUTTER MIXER 45-QUART TILT-LEVER FOOD PROCESSOR (1) HOBART HCM450 SINGLE SPEED CUTTER MIXER 45-QUART TILT-LEVER SEE-THROUGH COVER COMMERCIAL VERTICAL CUTTER MIXER SINGLE SPEED 1140 RPM 90-DEGREE TILTING BOWL SEE-THROUGH LID STAINLESS STEEL BOWL, MIXING BAFFLE, AND SUPPORT BAR STEEL BASE WITH POWDER COATED FINISH PULSE AND CONTINUOUS-4 200VAC 60HZ 5HP 23.5A 3PH CODE J WE POWERED UP THIS MIXER AND OBSERVED THE MOTOR AND BLADE FUNCTION AS DESIGNED IN BOTH PULSE AND CONTINUOUS MODES. THE TILT LEVER AND COVER ARE IN WORKING ORDER.

HP 53132A UNIVERSAL COUNTER W/3GHZ OPTION 030 (1)A COUNTER MANUFACTURER: HEWLETT PACKARD MODEL: 53132A UNIVERSAL COUNTER (53132A 030) FREQUENCY RANGE: DC TO 225MHZ (CHANNELS 1&2), 100MHZ-3GHZ (CHANNEL 3) 12 DIGITS PER SECOND RESOLUTION 1-BUTTON MEASUREMENTS WITH HPIB & RS-232 COMMUNICATIONS INSTALLED OPTIONS 030: ADD CHANNEL 3, 100-3000MHZ BANDWIDTH THE DISPLAY IS BRIGHT AND THE CONTROLS RESPONDED. WE WERE ABLE TO GET ALL CHANNELS TO REGISTER UP TO THEIR MAXIMUM RATED FREQUENCIES, CHANNEL 3 DOWN TO ITS MINIMUM, AND CHANNELS 1 AND 2 DOWN TO 10 HZ, THE LIMIT OF OUR GENERATOR. WE FOUND THAT ALL THE CHANNELS ARE ABLE TO REGISTER SIGNALS OF -10DBM WELL, BUT AT LOWER FREQUENCIES CHANNELS 1 AND 2 REQUIRED MUCH HIGHER INPUT SIGNALS, FROM ABOUT 0 DB AT 28KHZ TO EVEN AS HIGH AS 2 VOLTS TO GET DOWN TO 10HZ!

HOBART DE2 2-DOOR SS COMMERCIAL REACH-IN 65-1/2" WIDE 120V REFRIGERATOR S/N: 049717A COMMERCIAL REFRIGERATOR 2-DOOR STAINLESS STEEL ML: 049717A 120V 60 HZ SINGLE PHASE TOTAL AMPS: 15.6 REFRIGERANT: 22, 11 OZ MAX. DESIGN PRESSURE: HIGH SIDE: 450 PSIG LOW SIDE: 210 PSIG ANTI CONDENSATE HEATER: .9 AMPS DOOR OPENINGS: 28"W X 31"D X 68"H OVERALL EXTERIOR DIMENSIONS: 66.5"W X 37"D X 85"H TESTED OPERATONAL. IT REACHED AND MAINTAINED A TEMPERATURE OF APPROXIMATELY 36 DEGREES F WHILE SET AT THE CHILLER SETTING.

HP 53132A UNIVERSAL COUNTER W/ 3GHZ AND HS OVEN (1)A COUNTER MANUFACTURER: HEWLETT PACKARD MODEL: 53132A UNIVERSAL COUNTER (53132A 030) FREQUENCY RANGE: DC TO 225MHZ (CHANNELS 1&2), 100MHZ-3GHZ (CHANNEL 3) 12 DIGITS PER SECOND RESOLUTION 1-BUTTON MEASUREMENTS WITH HPIB & RS-232 COMMUNICATIONS INSTALLED OPTIONS 010: HIGH STABILITY OVEN TIMEBASE 030: ADD CHANNEL 3, 100-3000MHZ BANDWIDTH NEED TO SERVICE HP-IB INTERFACE. THE DISPLAY IS BRIGHT AND THE CONTROLS RESPONDED TO BUTTON PRESSES. WE WERE ABLE TO GET ALL CHANNELS TO REGISTER UP TO THEIR MAXIMUM RATED FREQUENCIES, CHANNEL 3 DOWN TO ITS MINIMUM, AND CHANNELS 1 AND 2 DOWN TO 10 HZ, THE LIMIT OF OUR GENERATOR.

2012 KOH YOUNG ZENITH LITE SOLDER PASTE SPI & AUTOMATIC OPTICAL INSPECTION AOI SYSTEM - INCLUDES OFFLINE PROGRAM STATION AND SERVER. SEE PHOTOS FOR MACHINE SPECIFICATIONS, INCLUDING MINIMUM AND MAXIMUM BOARD SIZES, THROUGHPUT, WEIGHTS AND DIMENSIONS. MANUALS AND CONFIGURATION FILES ARE IN THE MACHINE COMPUTER AND THE SERVER. BELOW ARE QUOTES FROM THE KOH YOUNG BROCHURE: SOLDER PASTE INSPECTION AND AOI ZENITH LITE AOI SYSTEM PROVIDES FULL 3D INSPECTION OF COMPONENTS, PATTERNS, AND EVEN FOREIGN MATERIAL ON ASSEMBLED PCBS WITH TRUE 3D MEASUREMENT PREPLACEMENT AND POST REFLOW. MEASUREMENT AND INSPECTION OF ALL KINDS OF DEFECTS INCLUDING MISSING COMPONENTS, OFFSET, ROTATION, POLARITY, UPSIDE DOWN, OCV/OCR, SOLDER FILET, BILLBOARDING, LIFTED LEAD, LIFTED BODY, BRIDGING AND MORE. PERFECT PCB WARP COMPENSATION SOLUTION: FPCB, SLOPE, HEIGHT DIFFERENCES, LOCAL BOARD / WARP / ROTATION MINIMIZATION OF FALSE CALL: WARP COMPENSATION PROVIDES REVOLUTIONARY SOLUTION TO PCB WARPAGE. PERFECT FULL 3D INSPECTION PERFORMANCE WIDE INSPECTION OBJECTS COVERAGE QUICK & SIMPLE INSPECTION CONDITION SETTING

NEW FOCUS 8410 ROTATION MOUNT/ROTARY STAGE FOR 1.0" DIAMETER COMPONENTS (OPTICS ETC.) DRIVEN BY PICOMOTOR CLOSED-LOOP PIEZO MOTOR INCLUDES ENCODER FOR SUPERIOR POSITION FEEDBACK IN ROTATIONAL ACCURACY PROVIDES MICRORADIAN PRECISION CONTINUOUS 360O ROTATION 1.040-32 INTERNAL THREAD MAXIMUM SPEED: 1-2 O/S ANGULAR RESOLUTION: 0.2 MRAD MOUNTING THREADS: 8-32 THREADED MOUNTING HOLES ON ROTOR FACE AND SIDES OF BODY COUNTERSUNK CLEARANCE MOUNTING HOLES ON EACH CORNER OPERATING TEMPERATURE: 1040 OC 79 MM ROTOR 31 MM THICK THIS WAS REMOVED FROM WORKING EQUIPMENT.

IAC INDUSTRIES QS-1023202-D SKY BLUE SHELF ASSEMBLY 55.75"X12 W/(2)SHELVES. INDUSTRIAL UTILITY SHELF. COMPATIBLE: 2 UPRIGHT MODEL. COLOR: SKY BLUE. BENCH LENGTH: 60". SHELF LENGTH: 55.75". SHELF DEPTH: 12". SHELF ANGLE IS ADJUSTABLE FORM 0 TO 15 DEGREES. CONSTRUCTION: 16-GAUGE STEEL. NEW IAC INDUSTRIES SKY BLUE SHELF ASSEMBLY 56" X 12" W/ (2) STEEL SHELVES

IAC INDUSTRIES QS-1022122 - 52"L ELECTRICAL CHANNEL PDU W/ 8 OUTLETS 120VAC 15A (1) IAC INDUSTRIES QS-1022122 - 52"L ELECTRICAL CHANNEL W/ 8 OUTLETS 120VAC 15A ELECTRICAL CHANNEL 120VAC 15AMP 60HZ 1PH THE UNIT WAS POWERED ON AND TESTED FOR ITS OUTPUT.

IAC INDUSTRIES QS-1023202-D INDUSTRIAL UTILITY SHELF 55.75"LX12"D SKY BLUE UTILITY SHELVES. COMPATIBLE: 2 UPRIGHT MODEL. COLOR: SKY BLUE. BENCH LENGTH: 60". SHELF LENGTH: 55.75". SHELF DEPTH: 12". SHELF ANGLE IS ADJUSTABLE FROM 0 TO 15 DEGREES. CONSTRUCTION: 16-GAUGE STEEL. (LOT OF 2) NEW IAC INDUSTRIES 56"L X 12"D INDUSTRIAL SKY BLUE UTILITY SHELVES (2)

1999 NATIONAL WHEEL-O-VATOR COMPANY WHEEL-O-VATOR 48" WHEELCHAIR ELEVATOR 48" HANDICAP ACCESSIBILITY PLATFORM LIFT ADA WHEELCHAIR ELEVATOR RAISES THE PLATFORM 48" FROM THE MOUNTING SURFACE OCCUPANT IS ENCLOSED ON FOUR SIDES EASY OPERATION, LIGHT PRESSURE ON A LARGE TOGGLE SWITCH MAKES IT GO FULL LENGTH BAR ALONG ONE INSIDE WALL RATED SPEED: 9 FEET PER MINUTE RATED LOAD: 750 LBS (340 KG) INSIDE CARRIAGE AREA: 35" OVERALL WIDTH, 32" WIDE AT THE BAR, 49.5" DEEP CARRIAGE WALL 42" HIGH AROUND OCCUPANT STEEL LOWER ENTRANCE RAMP, 2.5" HIGH 30" DEEP OVERALL DIMENSIONS APPROXIMATELY 65" X 53" X 91" PLATFORM REMAINS ENCLOSED AT ALL TIMES BOTTOM AREA IS ENCLOSED AT ALL TIMES SYNCHRONIZED LOWER DOORS FOR EASE OF USE MAGNETIC AND MECHANICAL DOOR LATCHES CAN'T OPEN EXCEPT AT TOP OR BOTTOM INTERLOCKED DOORS PREVENT OPERATION WITH AN OPEN DOOR KEY SWITCHES AT ALL OPERATOR STATIONS (ONE KEY IS INCLUDED) SUSPENSION AND SUPPORT SYSTEM: SCREW DRIVE DUAL DRIVE BELTS ON AC INDUCTION MOTOR STEEL CONSTRUCTION CARRIAGE WEIGHT: 155 LBS POWER REQUIREMENT: 115V 60HZ 14A THIS LIFT IS IN GOOD WORKING CONDITION. OPERATION OF ALL THE UP/DOWN SWITCHES REQUIRES ONLY A VERY LIGHT TOUCH.

NATIONAL INSTRUMENTS PXI-1031 CHASSIS W/ PXI-8175, 6713, 6527, 6031E S/N: 190871K-01L (1) PXI-1031 CHASSIS (1) PXI-8175 EMBEDDED CONTROLLER (1) PXI-6713 ANALOG OUTPUT (1) PXI-6527 DIGITAL I/O (1) PXI-6031E MULTI-FUNCTION I/O PXI CHASSIS WITH BACKPLANE AND POWER SUPPLY 4 SLOTS POWER: 100-240VAC 50/60HZ 4-2A PXI-8175 EMBEDDED CONTROLLER CPU: PENTIUM III 866MHZ 128 MB RAM MODULE INSTALLED HARD DRIVE IS NOT INCLUDED PXI-6713 ANALOG OUTPUT CARD 12-BITS 8 CHANNELS HIGH SPEED ANALOG OUTPUT PXI-6527 DIGITAL INPUT/OUTPUT CARD 24 SOLID STATE RELAY DIGITAL OUTPUTS 24 OPTICALLY ISOLATED DIGITAL INPUTS SWITCH UP TO 120MA SENSE DIGITAL LEVELS TO 28VDC PXI-6031E MULTIFUNCTION CARD 64 ANALOG INPUTS, 16-BIT 100KS/S 2 ANALOG OUTPUTS 8 DIGITAL INPUT/OUTPUTS 2 24-BIT COUNTERS WE POWERED ON THIS CONTROLLER AND OBSERVED IT BOOT UP WITH NO ERRORS AND LOAD THE SOFTWARE THE PREVIOUS OWNER WAS USING.

NATIONAL INSTRUMENTS SC-2345 SIGNAL CONDITIONING CONNECTOR BLOCK W/ (2) SCC-TC02 (1) NI SC-2345 CONNECTOR BLOCK (2) NI SCC-TC02 THERMOCOUPLE INPUT MODULES P/N: 183687C-02 POWER MODULE: SCC-PWR02 INSTALLED I/O MODULES: (2) SCC-TC02 THERMOCOUPLE INPUTS

PVA CONFORMAL COATING MACHINE. SN: W1507

.5 METER PCB INSPECTION CONVEYOR

.5 METER PCB INSPECTION CONVEYOR - GOOD CONDITION

CONVEYOR TECHNOLOGIES PCB MAGAZINE LOADER AND UNLOADER WITH HUMIDIFIER