Quarterly Food and Beverage Packaging Equipment Auction

VON GAL VAL-U-PAL LOW LEVEL PALLETIZER: OUTPUT: UP TO 10 CASES PER MINUTE CYCLE RATE: UP TO 4 CYCLES PER MINUTE MAXIMUM LIFT WEIGHT: 250 POUNDS 30 POUNDS WITH SUCTION CUPS MAXIMUM LOAD HEIGHT: 6 FEET 8 INCHES PALLET MAGAZINE PALLET DIMENSIONS: 48 INCHES X 40 INCHES 6 HEAD SUCTION PICK UP: 3 CUPS PER SECTIONS CHAIN PALLET CONVEYOR: LENGTH: 15 FEET WIDTH: 43 INCHES HEIGHT: 18 INCHES ROLLER PRODUCT CONVEYOR: LENGTH: 14 FEET WIDTH: 31 INCHES HEIGHT: 38 INCHES PNEUMATIC CASE ROTATOR DROPPED CASE DETECTOR LOW PALLET DETECTION ELECTRICAL: VOLTS: 460 FREQUENCY: 60 HZ PHASE 3

COBALT 100 SERIES SEMI AUTOMATIC CASE FORMER: USED TO SQUARE AND TAPE MANUALLY OPENED BLANKS TO EITHER BE LOADED WHILE IN PLACE OR SENT DOWN THE LINE. OUTPUT: UP TO 15 CASES PER MINUTE DEPENDING ON APPLICATION AND USER DEXTERITY. CASE DIMENSIONS: LENGTH: 7-24 INCHES, WIDTH: 7-19 INCHES, MINIMUM HEIGHT: 6 INCHES. HAND ADJUSTMENTS. SLIDING TAPE HEAD: 2 INCHES WIDE. BUTTON TO MOVE THE CASE OUT OF THE ERECTING AREA ONCE COMPLETED OR DONE LOADING. CASTERS. ELECTRICAL: VOLTS: 115, FREQUENCY: 60HZ, PHASE 1, AMPS: 15. AIR REQUIREMENTS: 80 PSI. STAINLESS STEEL CONSTRUCTION.

COBALT 100 SERIES SEMI AUTOMATIC CASE FORMER: USED TO SQUARE AND TAPE MANUALLY OPENED BLANKS TO EITHER BE LOADED WHILE IN PLACE OR SENT DOWN THE LINE. OUTPUT: UP TO 15 CASES PER MINUTE DEPENDING ON APPLICATION AND USER DEXTERITY. CASE DIMENSIONS: LENGTH: 7-24 INCHES, WIDTH: 7-19 INCHES, MINIMUM HEIGHT: 6 INCHES. HAND ADJUSTMENTS. SLIDING TAPE HEAD: 2 INCHES WIDE. BUTTON TO MOVE THE CASE OUT OF THE ERECTING AREA ONCE COMPLETED OR DONE LOADING. CASTERS. ELECTRICAL: VOLTS: 115, FREQUENCY: 60HZ, PHASE 1, AMPS: 15. AIR REQUIREMENTS: 80 PSI. STAINLESS STEEL CONSTRUCTION.

COBALT 100 SERIES SEMI AUTOMATIC CASE FORMER: USED TO SQUARE AND TAPE MANUALLY OPENED BLANKS TO EITHER BE LOADED WHILE IN PLACE OR SENT DOWN THE LINE. OUTPUT: UP TO 15 CASES PER MINUTE DEPENDING ON APPLICATION AND USER DEXTERITY. CASE DIMENSIONS: LENGTH: 7-24 INCHES, WIDTH: 7-19 INCHES, MINIMUM HEIGHT: 6 INCHES. HAND ADJUSTMENTS. SLIDING TAPE HEAD: 2 INCHES WIDE. BUTTON TO MOVE THE CASE OUT OF THE ERECTING AREA ONCE COMPLETED OR DONE LOADING. CASTERS. ELECTRICAL: VOLTS: 115, FREQUENCY: 60HZ, PHASE: 1, AMPS: 15. AIR REQUIREMENTS: 80 PSI. STAINLESS STEEL CONSTRUCTION.

COBALT 100 SERIES SEMI AUTOMATIC CASE FORMER: USED TO SQUARE AND TAPE MANUALLY OPENED BLANKS TO EITHER BE LOADED WHILE IN PLACE OR SENT DOWN THE LINE OUTPUT: UP TO 15 CASES PER MINUTE DEPENDING ON APPLICATION AND USER DEXTERITY CASE DIMESNIONS: LENGTH: 7-24 INCHES WIDTH: 7-19 INCHES MINIMUM HEIGHT: 6 INCHES HAND ADJUSTMENTS SLIDING TAPE HEAD: 2 INCHES WIDE BUTTON TO MOVE THE CASE OUT OF THE ERECTING AREA ONCE COMPLETED OR DONE LOADING CASTERS ELECTRICAL: VOLTS: 115 FREQUENCY: 60HZ PHASE 1 AMPS: 15 AIR REQUIREMENTS: 80 PSI STAINLESS STEEL CONSTRUCTION

COBALT 100 SERIES SEMI AUTOMATIC CASE FORMER: USED TO SQUARE AND TAPE MANUALLY OPENED BLANKS TO EITHER BE LOADED WHILE IN PLACE OR SENT DOWN THE LINE. OUTPUT: UP TO 15 CASES PER MINUTE DEPENDING ON APPLICATION AND USER DEXTERITY. CASE DIMENSIONS: LENGTH: 7-24 INCHES, WIDTH: 7-19 INCHES, MINIMUM HEIGHT: 6 INCHES. HAND ADJUSTMENTS. SLIDING TAPE HEAD: 2 INCHES WIDE. BUTTON TO MOVE THE CASE OUT OF THE ERECTING AREA ONCE COMPLETED OR DONE LOADING. CASTERS. ELECTRICAL: VOLTS: 115, FREQUENCY: 60HZ, PHASE 1, AMPS: 15. AIR REQUIREMENTS: 80 PSI. STAINLESS STEEL CONSTRUCTION.

AXON EZ-A1 STAINLESS STEEL NECK BANDER WITH: PRODUCTION OUTPUT: UP TO 40 CONTAINERS PER MINUTE DEPENDING ON APPLICATION. PREVIOUS FILM DIAMETERS RAN: CURRENT: 1.875 INCHES 50 MM: 1.5 INCHES 55 MM: 1.625 INCHES 46 MM: 1.125 INCHES. INFEED HEIGHT: 47.75 INCHES (APPROXIMATE). PHOTO EYE SENSOR. ELECTRICAL: 120 VOLTS, 60 HERTZ, 10 AMPS, 1 PHASE. MOUNTED ON STAINLESS STEEL T STAND WITH CASTERS FOR MOBILITY.

METTLER TOLEDO SAFELINE STAINLESS STEEL METAL DETECTOR - USED SAFELINE METAL DETECTOR WITH: APERTURE DIMENSIONS: WIDTH: 12 INCHES HEIGHT: 2 INCHES CONVEYOR WIDTH: 6.5 INCHES PUSH-ARM REJECT AIR REQUIRED STAINLESS STEEL CONSTRUCTION MOUNTED ON CASTERS

SAFELINE POWERPHASEPLUS STAINLESS STEEL METAL DETECTOR WITH: APERTURE DIMENSIONS: WIDTH: 42.25 INCHES HEIGHT: 3.5 INCHES TABLETOP CONVEYOR WIDTH: 39.25 INCHES RIGHT TO LEFT PRODUCT FLOW ANALOG CONTROLS STOP-BELT REJECT STAINLESS STEEL CONSTRUCTION

NORDENMATIC 700 AUTOMATIC TUBE FILLER AND SEALER WITH: FILL RANGE: MINIMUM: 1 MILLILITER MAXIMUM: 600 MILLILITERS TUBE SIZE RANGE: MINIMUM: DIAMETER: 10 MILLIMETERS LENGTH: 50 MILLIMETERS MAXIMUM: DIAMETER: 620 MILLIMETERS LENGTH: 280 MILLIMETERS (24) POCKET ROTARY PUCK CAROUSEL AUTO TUBE LOADER TUBE CLEANER ELECTRICAL REQUIREMENTS: 220 VOLTS, 60 HERTZ, 3 PHASE

ADCO 15FEC HAND-LOAD HORIZONTAL CARTONER WITH: CONVEYOR DIMENSIONS: LENGTH: 107 INCHES WIDTH: 5 INCHES CENTERS: 11 INCHES MAXIMUM CARTON HEIGHT: 4 INCHES MAXIMUM CARTON LENGTH: 11 INCHES (2) CHAIN SYSTEM 0.5 HORSEPOWER MOTOR ELECTRICAL REQUIREMENTS: 115/230 VOLTS, 60 HERTZ, 1 PHASE APPROXIMATE OVERALL DIMENSIONS: LENGTH: 130 INCHES WIDTH: 32 INCHES HEIGHT: 68 INCHES

LANTECH Q300 LOW PROFILE TURNTABLE STRETCH WRAPPER WITH: PRODUCTION SPEED: UP TO 25-35 LOADS PER HOUR DEPENDING ON APPLICATION MAXIMUM LOAD WEIGHT: 4000 POUNDS MAX PRODUCT HEIGHT: 110 INCHES LOAD SIZE DIAGONAL MAXIMUM: 72 INCHES PLATE DIAMETER: 60 INCHES FILM ROLL DIMENSIONS: WEB WIDTH: 20 INCHES DIAMETER: 10 INCHES CORE DIAMETER: 3 INCHES MAST HEIGHT: 120 INCHES (APPROXIMATELY) BALDOR MOTOR: HORSEPOWER: .55 RPM: 1750 ELECTRICAL: 115 VOLTS, 60 HERTZ, 20 AMPS, 1 PHASE

UBE 1216 STAINLESS STEEL HAND LOAD BREAD BAGGER - USED UBE 1216 BREAD BAGGER WITH: SEMI-AUTOMATIC BAGGER, OPERATOR LOADS PRODUCT ONTO THE INFEED CONVEYOR AND MACHINE AUTOMATICALLY LOADS PRODUCT INTO BAGS PRODUCTS: SOFT ROLLS, HARD ROLLS, BAGELS, MUFFINS, AND PITAS CLEATED INFEED: LENGTH: 88 INCHES WIDTH: 10 INCHES CENTERS: 24.25 INCHES HEIGHT: 2 INCHES GUARD HEIGHT: 3.5 INCHES WORKING HEIGHT: 34 INCHES (ADJUSTABLE) AIR BLOW BAG OPENING SYSTEM AUTOMATIC PRODUCT PUSHING ARMS 4 STATION ROTARY BAG MAGAZINE STATION FOR EASE AND SPEED OF BAG RELOADING POWERED DISCHARGE CONVEYOR: 10 INCHES WIDE LEFT TO RIGHT OPERATION STAINLESS STEEL CONSTRUCTION ANALOG PUSH BUTTON CONTROLS AIR REQUIREMENTS: 90 PSI ELECTRICAL: 480 VOLTS, 60 HZ, 3 PHASE

MATRIX VERTICAL FORM FILL AND SEAL BAGGER - USED MATRIX BAGGER WITH: PRODUCTION SPEED: 40 BAGS PER MINUTE, DEPENDING ON APPLICATION FORMING HORN DIAMETERS: 5.5 INCHES 4.25 INCHES 3 INCHES SEAL JAW WIDTH: 13 INCHES PRINT REGISTERED CURRENT FILM DIMENSIONS: WEB WIDTH: 12.5 INCHES CORE DIAMETER: 3 INCHES FILM GRIP SIDE BELT DIMENSIONS: LENGTH: 13 INCHES WIDTH: 1 INCH FILM TRACKING ADJUSTMENT CAPABLE OF GUSSET BAGS WITH CHANGE PARTS STAINLESS STEEL CONTACT PARTS TOUCH SCREEN HMI MOUNTED ON A MILD STEEL FRAME ELECTRICAL: 250 VOLTS, 60 HERTZ, 3 PHASE PREVIOUS BAG DIMENSIONS: LENGTH: 12 INCHES WIDTH: 5.5 INCHES

CLEATED INCLINE CONVEYOR WITH SS PRODUCT HOPPER - USED CONVEYOR WITH: INPUT HEIGHT: 73 INCHES CLEATED BELT: CLEAT CENTERS: 14 INCHES CLEAT HEIGHT: 1 INCH BELT WIDTH: 18 INCHES DISCHARGE HEIGHT: 63 INCHES PRODUCT HOPPER: STAINLESS STEEL WIDTH: 23 INCHES REAR DISCHARGE GATE WASHDOWN CAPABLE STAINLESS STEEL FRAME MOUNTED ON LEVELING FEET

AVERY DENNISON TDI SHORT TAG THERMAL PRINTER WITH: SPEED: UP TO 250 MILLIMETERS PER SECOND MAXIMUM PRINT WIDTH: 128 MILLIMETERS TAG DIMENSIONS: MAXIMUM: LENGTH: 330 MILLIMETERS WIDTH: 154 MILLIMETERS MINIMUM: LENGTH: 50 MILLIMETERS WIDTH: 30 MILLIMETERS FOIL ROLL DIAMETER: OUTER DIAMETER: 90 MILLIMETERS INNER CORE: 1 INCH MAXIMUM FOIL LENGTH: 600 METERS MAXIMUM STACKING HEIGHT: 150 MILLIMETERS PUSH BUTTON CONTROLS STAINLESS STEEL EXTERIOR ELECTRICAL REQUIREMENTS: 115/230-240 VOLTS, 50/60 HERTZ, 1 PHASE

HASSIA FVT 12/24 DOUBLE FOLD TOWELETTE VERTICAL FORM FILL AND SEAL WITH: PACKET WIDTH: 1 INCH (4) LANES LAST RAN FILM WIDTH: 10 INCHES TUBE DIAMETER (4): 1.5 INCHES PUSH BUTTON CONTROLS 4 SIDED SACHET SEALER STAINLESS STEEL COMPONENTS PAINTED STEEL FRAME ELECTRICAL REQUIREMENTS: 208 VOLTS, 60 HERTZ, 3 PHASE

JDA 430 STAINLESS STEEL PREMADE POUCH BAGGER: PRODUCTION SPEED: 10-40 BAGS PER MINUTE DEPENDING ON APPLICATION BAG SIZES: LENGTH: 5 INCHES TO 14 INCHES WIDTH: 5 INCHES TO 10 INCHES SEAL JAW WIDTH: 12.5 INCHES (APPROXIMATELY) INFEED DIMENSIONS: LENGTH: 7.5 INCHES WIDTH: 7.5 INCHES HEIGHT: 59 INCHES STAINLESS STEEL WHITE BELT DISCHARGE CONVEYOR: LENGTH: 48 INCHES WIDTH: 5.5 INCHES BAGS TYPE: PREMADE POUCH DOYPACK POUCH PREOPENED ZIPPER POUCH NO BAG / NO RUN SENSOR NO BAG OPEN / NO FILL SENSOR STAINLESS STEEL CONSTRUCTION AIR REQUIREMENTS: 80 PSI, 20 CFM ELECTRICAL: 110 VOLTS, 1 PHASE, 15 AMPS FORTRESS VERTEX 5" FLOW THROUGH METAL DETECTOR: DIAMETER: 5 INCHES SEPARATED CONTROLS CLEATED Z-STYLE INCLINE CONVEYOR: LENGTH (INFEED TO DISCHARGE): 212 INCHES WIDTH: 10.5 INCHES DISCHARGE HEIGHT: 156 INCHES INFEED DIMENSIONS: LENGTH: 41 INCHES HEIGHT: 19 INCHES SLANT LENGTH: 129 INCHES DISCHARGE LENGTH: 54 INCHES (APPROXIMATELY) OVERALL HEIGHT: 170 INCHES VARIABLE SPEED CONTROL MOBILITY KIT STAINLESS STEEL CONSTRUCTION MOTOR: HORSEPOWER: 1 RPM: 1740 ELECTRICAL: 230/460 VOLTS, 60 HERTZ, 3 PHASE YAMATO ADW-510ACC 10 HEAD STAINLESS STEEL CCW MAX SPEED: 70 POUNDS PER MIN DEPENDING ON PRODUCT WEIGHT RANGE: 4 GRAMS TO 500 GRAMS BUCKET STYLE: SMOOTH BUCKET DIMENSIONS: TOTAL DIAMETER: 41 INCHES INFEED DIAMETER: 14 INCHES TOP BUCKETS: LENGTH: 5 INCHES WIDTH: 4.5 INCHES DEPTH: 9 INCHES BOTTOM WEIGH BUCKETS: LENGTH: 5 INCHES WIDTH: 6 INCHES DEPTH: 5.5 INCHES PRODUCT FUNNEL DEPTH: 17 INCHES STAINLESS STEEL CONSTRUCTION ELECTRICAL: 230 VOLTS, 60 HERTZ, 3 PHASE, 7.5 AMPS ERIEZ STAINLESS STEEL VIBRATORY PAN FEEDER: PAN DIMENSIONS: LENGTH: 38 INCHES WIDTH: 10 INCHES DEPTH: 5 INCHES HEIGHT: 24 INCHES ELECTRICAL: 115 VOLTS, 60 HERTZ, 1 PHASE, 1.2 AMPS STAINLESS STEEL MEZZANINE: STEP DIMENSIONS: LENGTH: 113 INCHES WIDTH: 29 INCHES HAND RAIL HEIGHT: 19 INCHES PLATFORM DIMENSIONS: LENGTH: 117 INCHES WIDTH: 96 INCHES HEIGHT: 90 INCHES SIDE RAILS: 49 INCHES TALL OVERALL HEIGHT: 137 INCHES LAST RAN ON THIS MACHINE: PRODUCT: PRETZELS BAG SIZE: LENGTH: 11 INCHES WIDTH: 8 INCHES CURRENT PRODUCT FILL WEIGHT: 6 OUNCES

I.C.G. TDI THERMAL PRINTER WITH: SPEED: UP TO 250 MILLIMETERS PER SECOND MAXIMUM PRINT WIDTH: 128 MILLIMETERS TAG DIMENSIONS: MAXIMUM: LENGTH: 330 MILLIMETERS WIDTH: 154 MILLIMETERS MINIMUM: LENGTH: 105 MILLIMETERS WIDTH: 25.4 MILLIMETERS FOIL ROLL DIAMETER: OUTER DIAMETER: 90 MILLIMETERS INNER CORE: 1 INCH MAXIMUM FOIL LENGTH: 600 METERS MAXIMUM STACKING HEIGHT: 150 MILLIMETERS PUSH BUTTON CONTROLS STAINLESS STEEL EXTERIOR ELECTRICAL REQUIREMENTS: 115/230-240 VOLTS, 50/60 HERTZ, 1 PHASE

ZED INDUSTRIES 15 T BLISTER PACK SEALER WITH: SPEED: UP TO 6 CYCLES PER MINUTE, DEPENDING ON APPLICATION SEALING AREA: LENGTH: 14 INCHES WIDTH: 15 INCHES MAXIMUM BLISTER DEPTH: 4 INCHES INFEED DIMENSIONS: LENGTH: 30 INCHES WIDTH: 20 INCHES PRECISION TIMER AND TEMPERATURE PAINTED STEEL CONSTRUCTION ELECTRICAL REQUIREMENTS: 115 VOLTS, 60 HERTZ, 1 PHASE OVERALL DIMENSIONS: LENGTH: 78 INCHES WIDTH: 27 INCHES HEIGHT: 60 INCHES

ZED INDUSTRIES 15 T BLISTER PACK SEALER WITH: SPEED: UP TO 6 CYCLES PER MINUTE, DEPENDING ON APPLICATION SEALING AREA: LENGTH: 14 INCHES WIDTH: 15 INCHES MAXIMUM BLISTER DEPTH: 4 INCHES INFEED DIMENSIONS: LENGTH: 30 INCHES WIDTH: 20 INCHES PRECISION TIMER AND TEMPERATURE PAINTED STEEL CONSTRUCTION ELECTRICAL REQUIREMENTS: 115 VOLTS, 60 HERTZ, 1 PHASE OVERALL DIMENSIONS: LENGTH: 78 INCHES WIDTH: 27 INCHES HEIGHT: 60 INCHES

TRIAPEX HV4 VERTICAL FORM FILL AND SEAL SACHET MACHINE WITH: SPEED: UP TO 40 BAGS PER MINUTE (DEPENDING ON PRODUCT SPECIFICATIONS) SEALING JAW LENGTH: 6 INCHES SEALING JAW WIDTH: 3 INCHES MAXIMUM BAG DIMENSIONS: LENGTH: 31.5 INCHES WIDTH: 11.8 INCHES DISCHARGE: LENGTH: 7 INCHES WIDTH: 6 INCHES HEIGHT: 8 INCHES AXFLOW JXO 4L1 LIQUID PISTON FILLER: HOPPER CAPACITY: 10 GALLONS HOPPER DIMENSIONS: DIAMETER: 16 INCHES DEPTH: 12 INCHES INFEED DIAMETER: 2.5 INCHES DISCHARGE DIAMETER: 2.5 INCHES ELECTRICAL: 110 VOLTS, 7.3 AMPS INCLINE PACK-OFF CONVEYOR: BOTTOM LENGTH: 42 INCHES INCLINE LENGTH: 64 INCHES WIDTH: 10.5 INCHES RUBBER MAT BELT AC WORD VACUUM SYSTEM WITH 16 GALLON CAPACITY TANK LAST RUNNING SALAD DRESSING AND SALSA.

LAUDENBERG FBM54 LIQUID HORIZONTAL FFS WITH: OUTPUT: UP TO 480 POUCHES PER MINUTE DEPENDING ON APPLICATION POUCH DIMENSIONS: LENGTH: 3.15-13.87 INCHES WIDTH: 1.98-10 INCHES POUCH WEIGHT RANGE: 0.5 OUNCES TO 5 POUNDS BAG FORMING STATION WITH DOSER APPLICATOR INCLINE DOSER HOPPER: 72 LENGTH X 12 WIDTH (INCHES) ROTARY BAG FILLING STATION: TWO (2) HEAD DRIVING NOZZLES BOWL FEEDER: 18 INCHES NILFISK T26PLUS VAC SYSTEM NOVAKUST VACUUM SCRAP REMOVAL ON PUSH CART EIGHT (8) SETS OF CLAMPS ALFA LAVAL LKH10 CENTRIFUGAL PUMP CONTROL PANEL ALLEN-BRADLEY PANELVIEW 1000 TOUCHSCREEN PUSH BUTTON START/STOP ELECTRICALS: PHASE: 3 VOLTAGE: 480 FREQUENCY: 60 HERTZ STAINLESS STEEL CONSTRUCTION PREVIOUSLY RUNNING POUCHES: 12.75 LENGTH X 7 WIDTH (INCHES) 12.5 LENGTH X 9.75 WIDTH (INCHES)

MARQ HPE215 3" TAPE BOTTOM SEAL CASE ERECTOR - USED MARQ HPE215 CASE ERECTOR WITH: MINIMUM CASE DIMENSIONS: LENGTH: 6 INCHES WIDTH: 5.25 INCHES HEIGHT: 3.5 INCHES MAXIMUM CASE DIMENSIONS: LENGTH: 27 INCHES WIDTH: 17 INCHES HEIGHT: 18 INCHES 3 INCH TAPE HEAD UP TO 7 CASES PER MINUTE TOP AND BOTTOM FLIGHT LUG DRIVE MECHANICAL FLAP FOLDING ELECTRICAL: 120 VOLTS, 1 PH, 60 HZ AIR REQUIREMENTS: 80 PSI

CIRCLE PACKAGING 6 LANE STICK PAK VERTICAL FORM FILL AND SEAL WITH: SPEED: UP TO 400 PACKAGES PER MINUTE (DEPENDING ON PRODUCT SPECIFICATIONS) MAXIMUM FILM WIDTH: 12 INCHES ROLLER CENTERS: 2 INCHES (6) LANES STAINLESS STEEL CONSTRUCTION PNEUMATIC KNIFE ATTACHMENT ADDED HMI WITH RECIPE RETRIEVAL/FAULT DISPLAY/PRODUCTION INFORMATION FILM TYPE CAPABILITY: COLD SEAL, FOIL-POLY, LAMINATES, METALIZED, POLY-COATED PAPER, POLYPROPYLENE AIR REQUIREMENTS: 80 PSI AT 90 SQUARE CUBIC FEET PER MINUTE ELECTRICAL: 240/480 VOLTS, 60 HZ

AUTOBAG SPRINT 60 SIDEPOUCH BAGGER - USED AUTOBAG SPRINT 60 BAGGER WITH: LOAD AREA: 60 INCHES PRODUCTION RATE: INTERMITTENT MODE: UP TO 70 BAGS PER MINUTE, DEPENDING ON APPLICATION CONTINUOUS MODE: UP TO 120 BAGS PER MINUTE, DEPENDING ON APPLICATION MINIMUM BAG SIZE: LENGTH: 3 INCHES WIDTH: 2.6 INCHES MAXIMUM BAG SIZE: LENGTH: 18.75 INCHES WIDTH: 20 INCHES BAG THICKNESS: MINIMUM: 1.32 MIL MAXIMUM: 4 MIL PASS-THROUGH: UP TO 5 INCHES AIR REQUIREMENTS: 60 PSI OF DRY, CLEAN AIR ELECTRICAL REQUIREMENTS: 120 VOLTS, 1 PHASE, 60 HERTZ STAINLESS STEEL CONSTRUCTION

AUTOBAG SPRINT 60 SIDEPOUCH BAGGER - USED AUTOBAG SPRINT 60 BAGGER WITH: LOAD AREA: 60 INCHES PRODUCTION RATE: INTERMITTENT MODE: UP TO 70 BAGS PER MINUTE, DEPENDING ON APPLICATION CONTINUOUS MODE: UP TO 120 BAGS PER MINUTE, DEPENDING ON APPLICATION MINIMUM BAG SIZE: LENGTH: 3 INCHES WIDTH: 2.6 INCHES MAXIMUM BAG SIZE: LENGTH: 18.75 INCHES WIDTH: 20 INCHES BAG THICKNESS: MINIMUM: 1.32 MIL MAXIMUM: 4 MIL PASS-THROUGH: UP TO 5 INCHES AIR REQUIREMENTS: 60 PSI OF DRY, CLEAN AIR ELECTRICAL REQUIREMENTS: 120 VOLTS, 1 PHASE, 60 HERTZ STAINLESS STEEL CONSTRUCTION

AUTOBAG SPRINT 60 SIDEPOUCH BAGGER - USED AUTOBAG SPRINT 60 BAGGER WITH: LOAD AREA: 60 INCHES PRODUCTION RATE: INTERMITTENT MODE: UP TO 70 BAGS PER MINUTE, DEPENDING ON APPLICATION CONTINUOUS MODE: UP TO 120 BAGS PER MINUTE, DEPENDING ON APPLICATION MINIMUM BAG SIZE: LENGTH: 3 INCHES WIDTH: 2.6 INCHES MAXIMUM BAG SIZE: LENGTH: 18.75 INCHES WIDTH: 20 INCHES BAG THICKNESS: MINIMUM: 1.32 MIL MAXIMUM: 4 MIL PASS-THROUGH: UP TO 5 INCHES AIR REQUIREMENTS: 60 PSI OF DRY, CLEAN AIR ELECTRICAL REQUIREMENTS: 120 VOLTS, 1 PHASE, 60 HERTZ STAINLESS STEEL CONSTRUCTION

AUTOBAG SPRINT 60 SIDEPOUCH BAGGER - USED AUTOBAG SPRINT 60 BAGGER WITH: LOAD AREA: 60 INCHES PRODUCTION RATE: INTERMITTENT MODE: UP TO 70 BAGS PER MINUTE, DEPENDING ON APPLICATION CONTINUOUS MODE: UP TO 120 BAGS PER MINUTE, DEPENDING ON APPLICATION MINIMUM BAG SIZE: LENGTH: 3 INCHES WIDTH: 2.6 INCHES MAXIMUM BAG SIZE: LENGTH: 18.75 INCHES WIDTH: 20 INCHES BAG THICKNESS: MINIMUM: 1.32 MIL MAXIMUM: 4 MIL PASS-THROUGH: UP TO 5 INCHES AIR REQUIREMENTS: 60 PSI OF DRY, CLEAN AIR ELECTRICAL REQUIREMENTS: 120 VOLTS, 1 PHASE, 60 HERTZ STAINLESS STEEL CONSTRUCTION

AUTOBAG SPRINT 60 SIDEPOUCH BAGGER - USED AUTOBAG SPRINT 60 BAGGER WITH: LOAD AREA: 60 INCHES PRODUCTION RATE: INTERMITTENT MODE: UP TO 70 BAGS PER MINUTE, DEPENDING ON APPLICATION CONTINUOUS MODE: UP TO 120 BAGS PER MINUTE, DEPENDING ON APPLICATION MINIMUM BAG SIZE: LENGTH: 3 INCHES WIDTH: 2.6 INCHES MAXIMUM BAG SIZE: LENGTH: 18.75 INCHES WIDTH: 20 INCHES BAG THICKNESS: MINIMUM: 1.32 MIL MAXIMUM: 4 MIL PASS-THROUGH: UP TO 5 INCHES AIR REQUIREMENTS: 60 PSI OF DRY, CLEAN AIR ELECTRICAL REQUIREMENTS: 120 VOLTS, 1 PHASE, 60 HERTZ STAINLESS STEEL CONSTRUCTION

PACK AIR AL-18195 PLASTIC TABLE-TOP MASS FLOW ACCUMULATION CONVEYOR. TABLE DIMENSIONS: LENGTH: 80 INCHES WIDTH: (7) 3.5 INCH TOTAL WIDTH: 24.5 INCHES (APPROXIMATELY) INFEED DIMENSIONS: WIDTH: 23 HEIGHT: 43.5 DISCHARGE HEIGHT: 39.5 INCHES GUIDE RAIL HEIGHT: 3 INCHES BELT TYPE: PLASTIC MAT-TOP MOUNTED ON (4) LEGS

WEIGHPACK VERTEK 1150 SLANTED & 10 HEAD COMBISCALE - USED WEIGHPACK VFFS WITH: OUTPUT: UP TO 40 CYCLES PER MINUTE BAG SIZE RANGE: WIDTH: 4 - 11 INCHES LENGTH: 4 - 16 INCHES BAG MATERIALS: POLYETHYLENE LAMINATES INCLUDES MULTI-HEAD NET WEIGHT SCALE: 10 HEAD SCALE SMOOTH STAINLESS STEEL BUCKETS PNEUMATICALLY OPERATED SEAL BAR HORIZONTAL SEAL JAWS AIR ACTIVATED SERRATED KNIFE POWERED FILM UNWINDING STAINLESS STEEL CONSTRUCTION VOLTAGE240 ELECTRICAL PHASE1PH HERTZ60HZ

AXON EZ-100 STAINLESS STEEL SLEEVE APPLICATOR WITH MARBURG INDUSTRIES HEAT TUNNEL - USED AXON SLEEVE APPLICATOR WITH: SINGLE HEAD SLEEVES 150 CONTAINERS PER MINUTE (DEPENDENT ON CONTAINER) SLEEVE LAYFLAT RANGE: 20 TO 112 MILLIMETERS (0.79 TO 4.41 INCHES) CONTAINER DIAMETER: 11 TO 68 MILLIMETERS (0.43 TO 2.68 INCHES) APPLIED MATERIALS: PVC, PETG, OPS, PLA FILM THICKNESS: 40 - 70 MICRONS (1.5 TO 3.0 MIL) AIR PRESSURE: 80 PSI AIR VOLUME: 3-5 SCFM PHOTOEYE BEAM HEIGHT (ABOVE CONVEYOR BELT): AT MIDDLE OF BOTTLE CAP HEIGHT PHOTOEYE BEAM LEADING POSITION: AT UPSTREAM EDGE OF SLEEVE CONVEYOR RAIL OFFSET: BOTTLE CENTERED ON BELT SLEEVER SUCTION CUP RETRACTOR SLEEVE PLUNGER EXTENSION OVERALL DIMENSIONS: HEIGHT: 89 INCHES WIDTH: 17 INCHES LENGTH: 45.5 INCHES ELECTRICAL REQUIREMENTS: VOLTS: 120 FREQUENCY: 60 SINGLE PHASE MARBURG HEAT TUNNEL RADIANT HEAT (X2) 3,000-WATT CAL RODS STAINLESS STEEL CONSTRUCTION OVERALL CONSTRUCTION: LENGTH: 22 INCHES WIDTH: 3.5 INCHES HEIGHT: 6 INCHES ELECTRICAL REQUIREMENTS: VOLTS: 220 FREQUENCY: 60 SINGLE PHASE AMPS: 30 AXON CONVEYOR STAINLESS STEEL CONSTRUCTION (4) LOCKING WHEELS 0.5 HORSEPOWER MOTOR ELECTRICAL REQUIREMENTS: VOLTS: 90 AMPS: 5.5

STAINLESS STEEL WRAPAROUND GLUE LABELER WITH 4 INCH WIDE X 78 INCH LONG CONVEYOR - USED WRAPAROUND GLUE LABELER WITH: SPEED CONTROLS ADJUSTABLE HEIGHT GUARD RAILS PLASTIC TABLETOP CONVEYOR: TOPPER 0.33HP MOTOR VOLTS:220/380 FREQUENCY: 50 HZ THREE PHASE DIMENSIONS: WIDTH: 4 INCHES LENGTH: 78 INCHES DELTA HMI (4) LOCKABLE WHEELS ELECTRICAL REQUIREMENTS: VOLTS: 120 FREQUENCY: 60 HZ SINGLE PHASE LAST RAN 2 INCH X 7 INCH BOTTLES

2019 ACCUTEK PACKAGING EQUIPMENT CO. 50-C0E-CH2 CAP LOADER ELEVATOR STAINLESS STEEL CAP LOADER ELEVATOR WITH: CLEATED BELT VARIABLE SPEED CONTROLS MOUNTED ON 4 CASTERS AIR REQUIREMENTS: 80PSI ELECTRICAL REQUIREMENTS: VOLTS: 120 FREQUENCY: 60HZ SINGLE PHASE LAST PRODUCT RAN: 2.375 INCH CALYX GLASS JAR LIDS

DALEMARK 975-TA INK JET CODER - USED DALEMARK INK JET CODER WITH: SPEED: UP TO 200 PIECES PER MINUTE MINIMUM PRODUCT SIZE RANGE: LENGTH: 2 INCHES WIDTH: 2 INCHES MAXIMUM PRODUCT SIZE RANGE: LENGTH: 12 INCHES WIDTH: 16 INCHES PRODUCT THICKNESS RANGE: MINIMUM: 0.004 INCHES MAXIMUM: 0.375 INCHES INFEED HOPPER HEIGHT: 8 INCHES ADJUSTABLE GUIDE RAILS VARIABLE SPEED CONTROL STAINLESS STEEL FRAME ELECTRICAL REQUIREMENTS: 110 VOLTS, 60 HERTZ, 1 PHASE

SUN INDUSTRIES SBR-8V2016 8 STATION ROTARY BLISTER SEALER - USED SUN INDUSTRIES ROTARY BLISTER SEALER WITH: 8 STATIONS TOTAL PLATE DIMENSIONS: WIDTH: 16.5 INCHES LENGTH: 21.5 INCHES PLATES CURRENTLY SETUP FOR: (4) PIECES WIDTH: 2.75 INCHES ALUMINUM TABLE DIAMETER: 72 INCHES WORKING HEIGHT: 36 INCHES INFEED WIDTH: 14 INCHES DISCHARGE CONVEYOR: WIDTH: 20 INCHES LENGTH: 60 INCHES HEIGHT: 29 INCHES (ADJUSTABLE) PUSH BUTTON CONTROLS WITH DIGITAL SCREEN OVERALL FOOTPRINT: 15 X 12 FEET AIR REQUIREMENTS: 100 PSI AT 25 SCFM ELECTRICAL: 206/220 VOLTS, 3 PHASE, 50/60 HZ

KAPS-ALL E4 SPINDLE CAPPER WITH A FEED SYSTEMS FSRF-24 CAP FEEDER - USED KAPS-ALL E4 SPINDLE CAPPER WITH: SPINDLES: 4 CAP SIZE: 2.375 INCH DIAMETER SPINDLE SPEED AND CONVEYOR SPEED CONTROL KNOBS BALDOR INDUSTRIAL MOTOR (4) CASTER WHEELS ELECTRICAL REQUIREMENTS: VOLTS: 120 FREQUENCY: 60 HZ PHASE 1 FEED SYSTEMS FSRF-24 CAP FEEDER SERIAL NUMBER: 969 AIR REQUIREMENTS: CFM: 2-4 PSI: 80 ELECTRICAL REQUIREMENTS: VOLTS: 110/220 FREQUENCY: 50/60 HZ PHASE 1 LAST PRODUCT RAN: 2.375 INCH GLASS JAR LID

CIRCLE PACKAGING V16S VERTICAL FORM FILL AND SEAL - USED CIRCLE PACKAGING V16 VERTICAL FORM FILL AND SEAL WITH: SPEED: UP TO 700 PACKAGES PER MINUTE, DEPENDING ON PACKAGE SIZE AND APPLICATION LAST RAN PACKAGE SIZE: LENGTH: 2 INCHES WIDTH: 2 INCHES (6) LANES MAXIMUM WEB WIDTH: 12 INCHES FILM TYPES: LAMINATES METALIZED POLY-COATED PAPER POLYPROPYLENE ALLEN BRADLEY PLC TOUCHSCREEN CONTROLS PAINTED STEEL CONSTRUCTION AIR REQUIREMENTS: 80 PSI AT 90 SQUARE CUBIC FEET PER MINUTE ELECTRICAL REQUIREMENTS: 480 VOLTS, 60 HERTZ, 3 PHASE

DEL SANITARY ADJUSTABLE SIDE BELT OVERCAPPER - USED DEL SIDE BELT OVERCAPPER WITH: 4 INCHES BETWEEN SIDE BELTS APERTURE: HEIGHT: 21.5 INCHES WIDTH: 7.5 INCHES ELECTRICAL REQUIREMENTS: VOLTS: 115/208-230 FREQUENCY: 60 HZ PHASE 1

ISHIDA CCW-Z-214W-S/20-PP STAINLESS STEEL COMPUTER COMBINATION CHECKWEIGHER WITH: BUCKET VOLUME: 1 LITER DIMPLED STAINLESS STEEL BUCKETS OVERALL DIMENSIONS: LENGTH: 45.5 INCHES WIDTH: 45.5 INCHES HEIGHT: 45.5 INCHES ELECTRICAL REQUIREMENTS: VOLTS: 220 FREQUENCY: 60 HZ PHASE 3

ALEPACK BATTERY PACKAGING LINELAST RAN PACK SIZE: LENGTH: 2.5 INCHES WIDTH: 1.75 INCHES INFEED DIMENSIONS (3) LANES: LENGTH: 27 INCHES WIDTH: 3 INCHES DISCHARGE CONVEYOR DIMENSIONS (3) LANES: LENGTH: 32 INCHES WIDTH: 2 INCHES ACCUMULATION TABLE DIMENSIONS: LENGTH: 32 INCHES WIDTH: 24 INCHES DUST COLLECTOR INCLUDES MULTIPLE INSERTS FOR DIFFERENT PACK SIZES TOUCH SCREEN CONTROLS STAINLESS STEEL FRAME AIR CONSUMPTION: 6 CUBIC FEET PER MINUTE AT 100 PSIG ELECTRICAL REQUIREMENTS: 230 VOLTS, 60 HERTZ, 3 PHASE OVERALL DIMENSIONS: LENGTH: 163 INCHES WIDTH: 33 INCHES HEIGHT: 100 INCHES

SCHNEIDER PACKAGING EQUIPMENT CO. 57SS10BAB WITH A GORING KERR METAL DETECTOR - USED SCHNEIDER PACKAGING EQUIPMENT CO. 57SS10BAB WITH: GORING KERR METAL DETECTOR TUNNEL MAT TOP CONVEYOR: LENGTH: 57.75 INCHES WIDTH: 9.75 INCHES GRASEBY VOLKMANN HMI ELECTRICAL REQUIREMENTS: VOLTS: 120 FREQUENCY: 60 HZ SINGLE PHASE AMPS: 6

2021 LGYF 2000BX STAINLESS STEEL CONTINUOUS ELECTROMAGNETIC INDUCTION SEALER - USED LGYF-2000BX MAGNETIC INDUCTION SEALER WITH: SEALING SPEED: UP TO 39.4 FEET PER MINUTE SEALING DIAMETER: 0.79 TO 5.1 INCHES BOTTLE HEIGHT: 1.6-15.74 INCHES OUTPUT POWER: 2000 WATTS SMOOTH TOP BELT CONVEYOR: DIMENSIONS: LENGTH: 50 INCHES WIDTH: 7 INCHES ELECTRICAL: VOLTS: 220 FREQUENCY: 50 HZ AMPS: 0.6 STAINLESS STEEL CONSTRUCTION WITH ALUMINUM PROFILE ELECTRICAL REQUIREMENTS: VOLTS; 220 FREQUENCY: 50HZ SINGLE PHASE

ISHIDA DACS-V-012-SI/WP-N BELT CHECKWEIGHER - USED ISHIDA BELT CHECKWEIGHERS WITH: WEIGHING CAPACITY: 1.2 KG BELT CONVEYOR WIDTH: 9 INCHES LENGTH: 16 INCHES BELT DISCHARGE HEIGHT: 31.5 INCHES OVERALL DIMENSIONS LENGTH: 26 INCHES WIDTH: 20 INCHES HEIGHT: 64 INCHES ELECTRICAL REQUIREMENTS: 120 VOLTS 60 HZ 3-PHASE 1.7 AMPS

ISHIDA DACS-V-012-SI/WP-N BELT CHECKWEIGHER - USED ISHIDA BELT CHECKWEIGHERS WITH: WEIGHING CAPACITY: 1.2 KG BELT CONVEYOR WIDTH: 9 INCHES LENGTH: 16 INCHES BELT DISCHARGE HEIGHT: 31.5 INCHES OVERALL DIMENSIONS LENGTH: 26 INCHES WIDTH: 20 INCHES HEIGHT: 64 INCHES ELECTRICAL REQUIREMENTS: 120 VOLTS 60 HZ 3-PHASE 1.7 AMPS

USED 9'L X 4.5"W STAINLESS STEEL CONVEYOR WITH: CONVEYOR DIMENSIONS: LENGTH: 108 INCHES WIDTH: 4.5 INCHES INFEED/DISCHARGE HEIGHT: 32.5 INCHES MOTOR: HORSEPOWER: 0.6 RPM: 1725 STAINLESS STEEL WASH DOWN BELT VARIABLE SPEED CONTROL GUIDE RAILS MOUNTED ON A MILD STEEL FRAME WITH CASTERS FOR MOBILITY ELECTRICAL: 208-230/460 VOLTS, 60 HERTZ, 3 PHASE, 2.1 AMPS

GORING KERR TEKTAMET 211 METAL DETECTOR - USED GORING KERR METAL DETECTOR WITH: WORKING APERTURE: WIDTH: 4.5 INCHES HEIGHT: 9.75 INCHES CONVEYOR DIMENSIONS: LENGTH: 48 INCHES WIDTH: 4.5 INCHES HEIGHT: 36 INCHES GUIDE RAIL HEIGHT: 2 INCHES CONVEYOR TYPE: PLASTIC TABLE TOP MOUNTED ON 4 STAINLESS STEEL LEGS

AZTECH EZT-600 E-Z TILT TOTE DUMPER WITH: MAXIMUM TILT WEIGHT: 600 POUNDS MAXIMUM LIFT HEIGHT: 71 INCHES PRODUCT DIMENSIONS: WIDTH: 48 INCHES DEPTH: 64 INCHES AUTOMATIC CONTROLS SAFETY BRAKE MOUNTED ON (4) WHEELS ELECTRICAL: 12 VOLT BATTERY

TOYO TM50-10 AUTOMATIC VERTICAL FORM FILL MACHINE - USED TOYO STICK PACK WITH: 500 TO 600 PACKAGES PER MINUTE PACKAGE STYLE: THREE SIDED END SEAL STYLE ONE SIDE FIN SEALED FILL VOLUMES: 5.0 GRAMS POUCH WIDTH: 17 MILLIMETERS 0.67 INCHES CURRENT POUCH LENGTH 102 MILLIMETERS 4.00 INCHES POUCH LENGTH DIMENSIONS: MINIMUM: 60 MILLIMETERS MAXIMUM: 150 MILLIMETERS POUCH STYLE: THREE SIDES SEALED FIN SEAL STYLE SEAL WIDTHS: VERTICAL: 5.0 MILLIMETERS (OR TO SPECIFICATION) HORIZONTAL: 6.5 MILLIMETERS (OR TO SPECIFICATION) TEN ACROSS CONFIGURATION FILM ROLL SHAFT: 3 INCH DIAMETER MAXIMUM FILM ROLL: 20 INCHES (10) STAINLESS STEEL FEED TUBES PNEUMATIC HORIZONTAL KNIFE ASSEMBLY ALLEN-BRADLEY CONTROL LOGIXS PLC WITH ALLEN-BRADLEY KINETIX SERVO DRIVES AND ALLEN-BRADLEY SERVO MOTORS. 2.0 HP DRIVE ASSEMBLY (4) BALL AND SOCKET MACHINE-LEVELING PADS EXTRA FILLING HEAD SUPPLIED TAKEAWAY BELT CONVEYOR STAINLESS STEEL CONSTRUCTION 1/2 HP DRIVE MOTOR DIMENSIONS LENGTH: 118 INCHES WIDTH: 17.7 INCHES OVERALL DIMENSIONS: LENGTH: 63.26 INCHES WIDTH: 65.31 INCHES HEIGHT:87.91 INCHES WEIGHT: 2900 POUNDS AIR REQUIREMENTS 30CFM AT 100 PSI ELECTRICAL REQUIREMENTS: VOLTS: 208 FREQUENCY: 60 HZ PHASE 3 AMPS: 40 LAST USED FOR GRANULAR SUGAR