Quarterly Food and Beverage Packaging Equipment Auction
Category: PACKAGING EQUIPMENT
Total Lots:
173
Total Sales:
🔒 Subscribe
Lot Price Distribution
| Year | Make | Model | Lot Description | Hammer Price | |
|---|---|---|---|---|---|
|
SEN-PACK |
SEN-PACK TRAY PACKER - USED SEN-PACK CASE PACKER WITH: SPEED: UP TO 30 CASES PER MINUTE, DEPENDING ON APPLICATION MINIMUM CASE SIZE: LENGTH: 150 MILLIMETERS WIDTH: 100 MILLIMETERS HEIGHT: 100 MILLIMETERS MAXIMUM CASE SIZE: LENGTH: 500 MILLIMETERS WIDTH: 350 MILLIMETERS HEIGHT: 250 MILLIMETERS MAGAZINE LENGTH: 1 METER CHANGEOVER TIME: APPROXIMATELY 15 MINUTES HOT-MELT GLUE CLOSURE STAINLESS STEEL FRAME AIR CONSUMPTION: 4 SQUARE CUBIC FEET PER MINUTE AT 80 PSI ELECTRICAL REQUIREMENTS: 480 VOLTS, 60 HERTZ, 3 PHASE LAST USED IN A BREWERY
|
🔒 Subscribe | ||
|
|
2022 | METTLER-TOLEDO | TABLEX II V3 |
2022 METTLER-TOLEDO TABLEX II V3 STAINLESS STEEL GRAVITY FED METAL DETECTOR WITH: MAXIMUM SENSITIVITY TO FE, NON-FE, AND SS METALS PRODUCT FORMAT: CAPSULES TABLETS COMPLIANCE: HIGH LEVEL (21 CFR) BASE LEVEL 5.7 INCH QVGA TOUCHSCREEN HMI ELECTRICAL REQUIREMENTS: VOLTS: 120 FREQUENCY: 60 HZ SINGLE PHASE AMPS: 4 LAST PRODUCT RAN: THC INFUSED TABLETS LAST RUN: AUGUST 2023
|
🔒 Subscribe |
|
|
MARQ | HPE412-3(RH)DL |
MARQ HPE412-3(RH)DL TAPE BOTTOM SEAL CASE ERECTOR - USED MARQ TAPE BOTTOM SEAL CASE ERECTOR WITH: PRODUCTION OUTPUT: UP TO 15 CASES PER MINUTE DEPENDING ON APPLICATION TAPE HEAD: 2 INCHES MAXIMUM FORMED CASE DIMENSIONS: LENGTH: 24 INCHES WIDTH: 18.5 INCHES HEIGHT: 18 INCHES MINIMUM FORMED CASE DIMENSIONS: LENGTH: 8 INCHES WIDTH: 5.25 INCHES HEIGHT: 3.5 INCHES MAXIMUM KNOCKDOWN CASE DIMENSIONS: LENGHT: 43 INCHES WIDTH: 33 INCHES MINIMUM KNOCKDOWN CASE DIMENSIONS: LENGTH: 13.25 INCHES WIDTH: 10.5 INCHES TOP AND BOTTOM VACUUM CUPS CONTINUOUS FEED HOPPER PHOTO EYE HAND CRANK OR MOTORIZED ADJUSTMENTS ELECTRICAL: 110 VOLTS, 60 HERTZ, 1 PHASE
|
🔒 Subscribe | |
|
|
CLIMAX | DP4-1/LD |
CLIMAX DP4-1/LD DROP CASE PACKER - USED CLIMAX PACKAGING DROP CASE PACKER WITH: STAINLESS STEEL CONSTRUCTION MAXIMUM OUTPUT: UP TO 28 CASES PER MINUTE (DEPENDING ON PRODUCT AND CONFIGURATION) CASE SIZE RANGE: MINIMUM: 8 INCHES LONG X 8 INCHES WIDE X 3 INCHES HIGH MAXIMUM: 22 INCHES LONG X 15 INCHES WIDE X 16 INCHES HIGH 6 LANES APPROXIMATE DIMENSIONS: LENGTH: 12 FEET WIDTH: 42 INCHES ELECTRICAL: VOLTS: 460 FREQUENCY: 60 HZ PHASE 3 AIR REQUIREMENTS: 60PSI VOLTAGE460 ELECTRICAL PHASE3PH HERTZ60HZ
|
🔒 Subscribe | |
|
|
72" BY 12" PLASTIC MAT TOP CONVEYOR - USED CONVEYOR WITH: CONVEYOR DIMENSIONS: LENGTH: 72 INCHES WIDTH: 12 INCHES INFEED HEIGHT: 38 INCHES MOUNTED ON CASTERS ELECTRICAL REQUIREMENTS: 208-230/460 VOLTS, 60 HERTZ, 3 PHASE
|
🔒 Subscribe | |||
|
|
VOLPAK | S-200-D |
VOLPAK S-200-D HORIZONTAL FORM FILL AND SEAL WITH: SACHET DIMENSIONS: MINIMUM: HEIGHT: 60 MILLIMETERS WIDTH: 60 MILLIMETERS MAXIMUM: HEIGHT: 240 MILLIMETERS WIDTH: 100 MILLIMETERS TYPES OF PRODUCTS: SOLIDS POWDERS NUMBER OF SIDES SEALED: 4 MECHANICAL POUCH OPENER PAINTED STEEL CONSTRUCTION ELECTRICAL REQUIREMENTS: 220 VOLTS, 60 HERTZ, 3 PHASE
|
🔒 Subscribe | |
|
|
BELT INCLINE CONVEYOR 117" L X 11.5" W - USED BELT INCLINE CONVEYOR WITH: BELT DIMENSIONS LENGTH: 117 INCHES WIDTH: 11.5 INCHES INFEED HEIGHT: 11.5 INCHES DISCHARGE HEIGHT: 59.5 INCHES MOUNTED ON (4) CASTERS STAINLESS STEEL CONSTRUCTION MOTOR SPECIFICATIONS: HORSEPOWER: 0.5 RPM: 1725 ELECTRICAL: 230/460 VOLTS, 60 HZ, 3 PHASE
|
🔒 Subscribe | |||
|
|
VOLPAK | S-200-D |
VOLPAK S-200-D HORIZONTAL FORM FILL AND SEAL WITH: SACHET DIMENSIONS: MINIMUM: HEIGHT: 60 MILLIMETERS WIDTH: 60 MILLIMETERS MAXIMUM: HEIGHT: 240 MILLIMETERS WIDTH: 100 MILLIMETERS TYPES OF PRODUCTS: SOLIDS POWDERS NUMBER OF SIDES SEALED: 4 MECHANICAL POUCH OPENER PAINTED STEEL CONSTRUCTION ELECTRICAL REQUIREMENTS: 220 VOLTS, 60 HERTZ, 3 PHASE
|
🔒 Subscribe | |
|
|
ROTARY ACCUMULATION TABLE-38 |
ROTARY ACCUMULATION TABLE-38 - USED ROTARY ACCUMULATION TABLE WITH: DIAMETER: 38 INCHES GUARD RAIL HEIGHT: 2.25 INCHES MAX HEIGHT FROM TABLE TO TOP OF GUARD RAILS: 4 INCHES WORKING HEIGHT: 43.25 INCHES STAINLESS STEEL CONSTRUCTION ELECTRICAL REQUIREMENTS: 480 VOLTS 60 HZ THREE PHASE .93 AMP
|
🔒 Subscribe | ||
|
|
SMOOTH RUBBER BLUE BELT CONVEYOR 10 FOOT LONG X 14 INCH WIDE - USED BLUE BELT CONVEYOR: CONVEYOR DIMENSIONS: LENGTH: 120 INCHES WIDTH: 14 INCHES GUIDE RAIL HEIGHT: 4.5 INCHES 0.75 HORSEPOWER CENTER DRIVE MOTOR ELECTRICAL: VOLTS: 230/460 FREQUENCY: 60 HZ PHASE 3 STAINLESS STEEL FRAME
|
🔒 Subscribe | |||
|
|
WEXXAR BEL | 252 |
WEXXAR BEL 252 TOP AND BOTTOM MANUAL CASE TAPER WITH: OUTPUT: UP TO 25 CASES PER MINUTE DEPENDING ON CASE SIZE NO TAPE HEADS INCLUDED CASE SIZE RANGE: MINIMUM: LENGTH: 8 INCHES WIDTH: 6 INCHES HEIGHT: 5 INCHES MAXIMUM: LENGTH: 22 INCHES WIDTH: 15.5 INCHES HEIGHT: 15.75 INCHES ADJUSTABLE INFEED/OUTFEED HEIGHT: MINIMUM: 25 INCHES MAXIMUM: 32 INCHES ELECTRICAL: 120 VOLTS, 60 HZ, PHASE 1
|
🔒 Subscribe | |
|
|
MATEER |
MATEER AUGER FILLER - USED AUGER FILLER WITH: HOPPER CAPACITY: 5 GALLONS HOPPER INFEED DIAMETER: 16 INCHES HOPPER DISCHARGE DIAMETER: 2.5 INCHES AUGER SCREW DIMENSIONS: DIAMETER: 3 INCHES LENGTH: 16 INCHES STAINLESS AND MILD STEEL CONSTRUCTION 1725 ROTATIONS PER MINUTE 0.5 HORSEPOWER MOTOR ELECTRICAL REQUIREMENTS: 230/460 VOLTS, 60 HERTZ, 3 PHASE
|
🔒 Subscribe | ||
|
|
TELE-SONIC | SB-180V |
TELE-SONIC SB-180V VERTICAL FORM FILL AND SEAL - USED TELE-SONIC VERTICAL FORM FILL AND SEAL WITH: OUTPUT: UP TO 55 PACKAGES PER MINUTE, DEPENDING ON APPLICATION MAXIMUM POUCH SIZE: LENGTH: 8 INCHES WIDTH: 5.5 INCHES MINIMUM POUCH SIZE: LENGTH: 2 INCHES WIDTH: 2 INCHES HOPPER CAPACITY: 10 GALLONS SEAL JAW LENGTH: VERTICAL: 7 INCHES HORIZONTAL: 8 INCHES ROTARY FILL STATION WITH (3) 2.5 INCH DIAMETER HOLES APPROXIMATE OVERALL DIMENSIONS: LENGTH: 38 INCHES WIDTH: 28 INCHES HEIGHT: 91 INCHES ELECTRICAL REQUIREMENTS: 220 VOLTS, 60 HERTZ, 1 PHASE
|
🔒 Subscribe | |
|
|
BILT-RITE | F-4 |
BILT-RITE F-4 122" L BY 6" W SMOOTH TOP BELT CONVEYOR CONVEYOR DIMENSIONS: LENGTH: 122 INCHES WIDTH: 6 INCHES INFEED HEIGHT: 29 INCHES DISCHARGE HEIGHT: 37 INCHES MOUNTED ON (4) LEGS STAINLESS STEEL CONSTRUCTION ELECTRICAL REQUIREMENTS: 120 VOLTS, 60 HERTZ, 1 PHASE
|
🔒 Subscribe | |
|
|
LANGEN | B1 O/L |
LANGEN B1 O/L AUTOMATIC HORIZONTAL GLUE CARTONER - USED LANGEN HORIZONTAL GLUE CARTONER WITH CARTON SPEED 20 TO 120 CARTONS PER MINUTE (DEPENDING ON CARTON SIZE AND APPLICATION) CARTON SIZES: MINIMUM: .75 INCHES LONG X .375 INCHES WIDE X 3.75 INCHES DEEP MAXIMUM: 10 INCHES LONG X 6 INCHES WIDE X 8-1/2 INCHES DEEP STANDARD CARTON FEED SAFETY GUARDS CARTON MAGAZINE HOT-MELT ATTACHMENT WITH PLS ELECTROCAM LOADING ZONE 72 INCHES ALLEN BRADLEY MICRO CONTROLLER STEEL IT EPOXY PAINT OVERHEAD CARTON SQUARING ELECTRICAL: 460 VOLT, 60 HZ, THREE PHASE
|
🔒 Subscribe | |
|
|
NORMECCANICA | BARREL LIFT |
NORMECCANICA BARREL LIFT BARREL LIFT WITH: LIFT DIMENSIONS: LENGTH: 32 INCHES WIDTH: 20 INCHES MANUAL OPERATION PAINTED STEEL CONSTRUCTION MOUNTED ON CASTERS OVERALL DIMENSIONS: LENGTH: 54 INCHES WIDTH: 20 INCHES HEIGHT: 40 INCHES
|
🔒 Subscribe | |
|
|
GORING KERR | TEKTAMET |
GORING KERR TEKTAMET STAINLESS STEEL 2" H BY 9.5" W METAL DETECTOR - USED GORING KERR METAL DETECTOR WITH: WORKING APERTURE: WIDTH: 9.5 INCHES HEIGHT: 2 INCHES INFEED HEIGHT: 29 INCHES (APPROXIMATE) CONVEYOR DIMENSIONS: LENGTH: 40 INCHES WIDTH: 9 INCHES MICROSTROBE LIGHT DAYTON MOTOR: HORSEPOWER: 1/12 RPM: 86 ELECTRICAL: 115 VOLTS, 60 HERTZ, 1 PHASE MOUNTED ON 4 STAINLESS STEEL LEGS
|
🔒 Subscribe | |
|
|
LOVESHAW | SP304 |
LOVESHAW SP304 2 INCH TOP & BOTTOM CASE TAPER - USED LOVESHAW CASE TAPER WITH: TOP & BOTTOM TAPEHEADS: 2 INCH SIDE DRIVE BELTS: HEIGHT: 2 INCHES SPEED: 72 FEET PER MINUTE FLAP FOLDERS CASE CAPACITY: LENGTH: 6 TO 24 INCHES WIDTH: 4.5 TO 20 INCHES HEIGHT: 4.5 TO 24 INCHES ELECTRICAL REQUIREMENTS: VOLTAGE: 110V PHASE: 1 FREQUENCY: 60 HZ CURRENT: 7.6 AMPS MANUALLY ADJUSTABLE HEIGHT AND WIDTH PUSHBUTTON START AND STOP CONTROLS MOUNTED ON ADJUSTABLE HEIGHT LEGS WITH LOCKING SWIVEL CASTERS
|
🔒 Subscribe | |
|
|
2020 | TAWI | VACUMOVE VM40 |
2020 TAWI VACUMOVE VM40 VACUUM BOX LIFT ASSIST - USED TAWI VACUUM BOX LIFT ASSIST WITH: CAPACITY: 30 KILOGRAMS HANDLE TYPE (3): FLEX INNER HANDLE: 300 MILLIMETERS OUTER HANDLE: 700 MILLIMETERS PUMP TYPE (3): LARGE PUMP VACUUM LEVEL: 60 PERCENT VACUUM FLOW: 235M3/H LIFTING HEIGHT SPECIFICATIONS: MINIMUM: 3050 MILLIMETERS MAXIMUM: 50 MILLIMETERS SUSPENSIONS HEIGHT: 4301 MILLIMETERS TRIPLE GANTRY BRIDGE CRANE DIMENSIONS: BRIDGE (LENGTH): 40 FEET RUNWAYS (WIDTH): 19 FEET GALLOW SUPPORT POSTS (PAIR) DIMENSIONS: HEIGHT: 14 FEET (OVERALL HEIGHT) BASEPLATES: 15 INCHES X 15 INCHES ELECTRICAL: 460 VOLTS, 3 PHASE, 60 HERTZ
|
🔒 Subscribe |
|
|
WESTERN SCALE | M2000A |
WESTERN SCALE M2000A STAINLESS SCALE W 6 DIGIT INDICATOR. DISPLAY: 6 DIGITS. SPEED: UP TO 100 SAMPLES PER MINUTE. ELECTRICAL REQUIREMENTS: VOLTAGE: 110V, FREQUENCY: 60 HZ, CURRENT: 0.5 AMPS. STAINLESS STEEL CONSTRUCTION. ADJUSTABLE HEIGHT LEGS MOUNTED ON CASTERS.
|
🔒 Subscribe | |
|
|
PLASTIC TABLETOP CONVEYOR 16 FOOT LONG X 24 INCH W - USED CONVEYOR WITH: PLASTIC TABLETOP BELT: LENGTH: 192 INCHES WIDTH: 24 INCHES PRODUCT GUIDE RAILS ELECTRIC MOTOR AND GEAR REDUCER MOUNTED ON TWO LOCKING SWIVEL CASTERS
|
🔒 Subscribe | |||
|
|
TALON | SUPRA |
TALON SUPRA MICROWAVE POPCORN BAG SEALER WITH: SPEED UP TO 90 BAGS PER MINUTE STAINLESS STEEL CONSTRUCTION ELECTRICAL REQUIREMENTS: 460 VOLTS, 60 HERTZ, 3 PHASE
|
🔒 Subscribe | |
|
|
TALON MFG. | SUPRA |
TALON MFG. SUPRA MICROWAVE POPCORN BAG MAKER WITH: SPEED: UP TO 300 BAGS PER MINUTE DEPENDING ON MATERIALS AND APPLICATION 8 STATION SEALING MECHANISM FILM ROLL WIDTH: 27 INCHES DISCHARGE CONVEYOR LENGTH: 54 INCHES ADJUSTABLE HEIGHT DISCHARGE, SET AT 34 INCHES ELECTRICAL: 460 VOLTS, 60 HZ, PHASE 3
|
🔒 Subscribe | |
|
|
ARPAC DELKOR | SPOT-PAK 112-SS-24 |
ARPAC DELKOR SPOT-PAK 112-SS-24 AUTOMATIC STAINLESS STEEL SHRINK BUNDLER WITH: SPEED: UP TO 25 BUNDLES PER MINUTE (DEPENDING ON PRODUCT SPECIFICATIONS) 24 INCH SEAL BAR APERTURE DIMENSIONS WIDTH: 27 INCHES HEIGHT: 18 INCHES CONVEYOR: LENGTH: 92 INCHES WIDTH: 24.75 INCHES ARPAC TOUCH PAD CONTROLS HEAT SEAL AND TUNNEL TEMPERATURE READOUTS DIGITAL COUNTER STAINLESS STEEL CONSTRUCTION ELECTRICAL: 208-230/460 VOLTS, 3 PHASE, 60 HZ TOP LOAD CASE PACKER: SPEED: UP TO 150 PACKAGE CONTAINERS PER MINUTE (DEPENDING ON PRODUCT SPECIFICATIONS) CHAIN CONVEYOR: LENGTH: 60 INCHES WIDTH: 24 INCHES CLEARANCE HEIGHT: 10 INCHES CASE MAGAZINE WIDTH: 17 INCHES VARIABLE SPEED DRIVE STAINLESS STEEL CONSTRUCTION ELECTRICAL: 90/180 VOLTS, SINGLE PHASE, 60 HZ CONVEYOR WITH LANER: BELT WIDTH: 24 INCHES BELT LENGTH: 94 INCHES GUIDE RAIL HEIGHT: 3.75 INCHES WORKING HEIGHT: 36 INCHES LANER WIDTH: 5.5 INCHES LANER HEIGHT: ADJUSTABLE STAINLESS STEEL CONSTRUCTION ELECTRICAL: 110 VOLTS, SINGLE PHASE, 60 HZ
|
🔒 Subscribe | |
|
|
SOTA | ULYM GW 7 |
SOTA ULYM GW 7 BULK BAG FILLING SYSTEM - USED SOTA BULK BAG FILLER WITH: INFEED: DIAMETER: 8 INCHES HEIGHT: 136 INCHES DISCHARGE: DIAMETER: 12 INCHES HEIGHT FROM SCALE: 64 INCHES ERIEZ 12.5X10 TGH2 RE54P ETC MAGNET FEEDER DUST COLLECTOR MESH SCREEN OVER INFEED ELECTRONIC VALVE CLOSURE SYSTEM METTLER TELEDO SCALE WIDTH: 60 INCHES LENGTH: 60 INCHES HEIGHT: 18 INCHES CLEVELAND VIBRATORY MOTOR ELECTRICAL: 460 VOLTS, 60 HZ, PHASE 3
|
🔒 Subscribe | |
|
|
ALL FILL | A-1200R |
ALL FILL A-1200R VERTICAL FORM FILL AND SEAL WITH VF200-HD VIBRATORY FEEDER WITH: OUTPUT: UP TO 60 CYCLES PER MINUTE DEPENDING ON BAG STYLE AND FILL VOLUME CAPABLE OF RUNNING THE FOLLOWING BAG TYPES: PILLOW GUSSETED DOY-STYLE STAND UP AND HOLE PUNCHED FILLING VOLUMES: .5 OUNCES TO 5 POUNDS BAG SIZES: MINIMUM: 2.5 INCHES WIDE X 3 INCHES LONG MAXIMUM: 8 INCHES WIDE TO 14 INCHES LONG TOOL-LESS CHANGEOVER PLC CONTROL STORES 50 ROUTINES WITH A 7 INCH WIDE COLOR HMI
|
🔒 Subscribe | |
|
|
C.E. KING | 36" |
C.E. KING 36" STAINLESS STEEL ROTARY ACCUMULATION TABLE - USED ROTARY ACCUMULATION TABLE WITH: DIAMETER: 36 INCHES GUARD RAIL HEIGHT: 3.5 INCHES INFEED HEIGHT: 35 INCHES PUSH BUTTON CONTROLS STAINLESS STEEL CONSTRUCTION ELECTRICAL REQUIREMENTS: 220 VOLTS, 60 HERTZ, 2 PHASE
|
🔒 Subscribe | |
|
|
MATEER | 31-A |
MATEER 31-A STAINLESS STEEL 5 GALLON HOPPER AUGER FILLER WITH SCALE - USED AUGER FILLER WITH SCALE WITH: HOPPER CAPACITY: 5 GALLONS HOPPER DIAMETER: 22 INCHES DISCHARGE DIAMETER: 2 INCHES DISCHARGE HEIGHT: 40 INCHES DIGITAL SCALE PUSH BUTTON CONTROLS 2 HORSEPOWER MOTOR ELECTRICAL REQUIREMENTS: 460 VOLTS, 60 HERTZ, 3 PHASE
|
🔒 Subscribe | |
|
|
USED PACK OFF COLLECTION TABLE WITH: TABLE DIAMETER: 36 INCHES INFEED TABLE DIMENSIONS: LENGTH: APPROXIMATELY 17.75 INCHES WIDTH: APPROXIMATELY 19.75 INCHES INFEED/ADJUSTABLE DUAL LANE DISCHARGE HEIGHT: 34 INCHES GUIDE RAIL HEIGHT: 5.5 INCHES VARIABLE FREQUENCY DRIVE ENCLOSED FRAME THREADED LEVELER LEGS ELECTRICALS: 110 VOLTS, 50 HZ, PHASE 1
|
🔒 Subscribe | |||
|
|
PERRY INDUSTRIES |
PERRY INDUSTRIES STAINLESS STEEL ROTARY ACCUMULATION TABLE - USED PERRY INDUSTRIES ACCUMULATION TABLE WITH: DIAMETER: 36 INCHES DISCHARGE PLATFORM: LENGTH: 18 INCHES WIDTH: 22 INCHES HEIGHT: 32.5 INCHES SIDEWALL HEIGHT: 1.5 INCHES VARIABLE SPEED MOTOR ADJUSTABLE GUARD RAILS ELECTRICAL: 115 VOLTS, 5 AMPS, SINGLE PHASE
|
🔒 Subscribe | ||
|
|
GONGDA |
GONGDA DRYING, FILLING, CAPPING, AND LABELING LINE - USED GONGDA BEVERAGE LINE WITH: FILLER/CAPPER: 16 HEAD INFEED HEIGHT: 43.5 INCHES DISCHARGE HEIGHT: 42.5 INCHES RUNS LEFT TO RIGHT ADJUSTABLE HEIGHT FEET OVERALL DIMENSIONS: LENGTH: 90 INCHES WIDTH: 73 INCHES HEIGHT: 86 INCHES LABELER: VARIABLE SPEED ADJUSTABLE RAILS INFEED HEIGHT: 44 INCHES DISCHARGE HEIGHT: 44 INCHES AUGER SCREW PITCH: 3 INCHES RUNS LEFT TO RIGHT FILM CORE DIAMETER: 2 INCHES TOUCHSCREEN CONTROLS STAINLESS STEEL CONSTRUCTION OVERALL DIMENSIONS: LENGTH: 140 INCHES WIDTH: 33 INCHES HEIGHT: 67 INCHES ADJUSTABLE HEIGHT FEET PACK OFF TABLE INFEED HEIGHT: 41 INCHES RAIL HEIGHT: 3 INCHES OVERALL DIMENSIONS: LENGTH: 40 INCHES WIDTH: 24 INCHES HEIGHT: 45.5 INCHES
|
🔒 Subscribe | ||
|
|
NORDENPAC | 700 |
NORDENPAC 700 AUTOMATIC TUBE FILLER AND SEALER WITH: FILL RANGE: MINIMUM: 1 MILLILITER MAXIMUM: 600 MILLILITERS TUBE SIZE RANGE: MINIMUM: DIAMETER: 10 MILLIMETERS LENGTH: 50 MILLIMETERS MAXIMUM: DIAMETER: 620 MILLIMETERS LENGTH: 280 MILLIMETERS (24) POCKET ROTARY PUCK CAROUSEL PUCK DIAMETER: 3 INCHES AUTO TUBE LOADER TUBE CLEANER ELECTRICAL REQUIREMENTS: 220 VOLTS, 60 HERTZ, 3 PHASE
|
🔒 Subscribe | |
|
|
USED STAINLESS STEEL TUBE FILLER WITH: NOZZLE DIAMETER: 1/8 INCH PUSH BUTTON CONTROLS ALLEN BRADLEY PLC STAINLESS STEEL CONSTRUCTION ELECTRICAL REQUIREMENTS: 230/460 VOLTS, 60 HERTZ, 3 PHASE
|
🔒 Subscribe | |||
|
|
UNIPAC | SILVER TUBE FILLER |
UNIPAC SILVER TUBE FILLER WITH: PRODUCTION SPEED: UP TO 70 TUBES PER MINUTE TUBE SIZE RANGE: MINIMUM: 0.53 INCH DIAMETER 2.76 INCH HEIGHT MAXIMUM: 1.97 INCH DIAMETER 2.76 INCH HEIGHT FILL LEVEL: MINIMUM: 3.60 CUBIC INCHES MAXIMUM: 15.26 CUBIC INCHES AIR REQUIREMENTS: 8 BAR ELECTRICAL REQUIREMENTS: 220 VOLTS, 60 HERTZ, 3 PHASE APPROXIMATE OVERALL DIMENSIONS: LENGTH: 76 INCHES WIDTH: 70 INCHES HEIGHT: 96 INCHES
|
🔒 Subscribe | |
|
|
TOPFLEX | E-256 |
TOPFLEX E-256 L BAR SEALER WITH: SEAL JAW DIMENSIONS: LENGTH: 19 INCHES WIDTH: 17 INCHES CONVEYOR DIMENSIONS: LENGTH: 31 INCHES WIDTH: 15 INCHES DISCHARGE HEIGHT: 32 INCHES ELECTRICAL REQUIREMENTS: 220 VOLTS, 60 HERTZ, 3 PHASE
|
🔒 Subscribe | |
|
|
CDA | 40 INCH ROTARY ACCUMULATION TABLE |
CDA 40 INCH ROTARY ACCUMULATION TABLE - USED CDA ROTARY ACCUMULATION TABLE WITH: TABLE DIAMETER: APPROXIMATELY 36 INCHES STAINLESS STEEL CONSTRUCTION EMERGENCY STOP THREADED ADJUSTABLE HEIGHT LEGS
|
🔒 Subscribe | |
|
|
SACHET PACKET SEALER WITH: PACKET SIZE LENGTH: 5 INCHES WIDTH: 1.5 INCHES SEAL BAR LENGTH: 4 INCHES CHAIN LENGTH: 44 INCHES (2) LANES STAINLESS STEEL CONSTRUCTION OVERALL DIMENSIONS: LENGTH: 48 INCHES WIDTH: 15 INCHES HEIGHT: 42 INCHES
|
🔒 Subscribe | |||
|
|
MATEER |
MATEER PACKAGING HEEAD - SEE PHOTOS FOR DETAILS.
|
🔒 Subscribe | ||
|
|
MATEER |
MATEER PACKAGING HEAD - SEE PHOTOS FOR DETAILS.
|
🔒 Subscribe | ||
|
|
USED SACHET PACKET SEALER WITH: PACKET SIZE: LENGTH: 5 INCHES WIDTH: 1.5 INCHES SEAL BAR LENGTH: 4 INCHES CHAIN LENGTH: 44 INCHES (2) LANES STAINLESS STEEL CONSTRUCTION OVERALL DIMENSIONS: LENGTH: 48 INCHES WIDTH: 15 INCHES HEIGHT: 34 INCHES
|
🔒 Subscribe | |||
|
|
USED SACHET PACKET SEALER WITH: PACKET SIZE: LENGTH: 4 INCHES WIDTH: 1.5 INCH SEAL BAR LENGTH: 4 INCHES CHAIN LENGTH: 44 INCHES (2) LANES STAINLESS STEEL CONSTRUCTION OVERALL DIMENSIONS: LENGTH: 51 INCHES WIDTH: 20 INCHES HEIGHT: 46 INCHES
|
🔒 Subscribe | |||
|
|
USED AUGER FILLER WITH CONVEYOR WITH: NO BOWL NO AUGER CONVEYOR DIMENSIONS: LENGTH: 96 INCHES WIDTH: 8 INCHES OVERALL DIMENSIONS: LENGTH: 98 INCHES WIDTH: 12 INCHES HEIGHT: 88 INCHES
|
🔒 Subscribe | |||
|
|
SIGNATURE |
SIGNATURE HEAT SHRINK TUNNEL WITH: APERTURE DIMENSIONS: LENGTH: 24 INCHES WIDTH: 12 INCHES CONVEYOR DIMENSIONS: LENGTH: 52 INCHES WIDTH: 10 INCHES TUNNEL LENGTH: 40 INCHES ELECTRICAL REQUIREMENTS: 220 VOLTS, 60 HERTZ, 3 PHASE APPROXIMATE OVERALL DIMENSIONS: LENGTH: 53 INCHES WIDTH: 36 INCHES HEIGHT: 74 INCHES
|
🔒 Subscribe | ||
|
|
COMPUTORQUE |
COMPUTORQUE AUTOMATIC CAPPING SYSTEM - USED INLINE FILLING SYSTEM AUTOMATIC CAPPING SYSTEM WITH: CURRENT CAP SIZE: 24 MM VARIABLE SPEED CONTROLS CAP FEEDER DIAMETER: 24 INCHES HOPPER DIMENSIONS: LENGTH: 22 INCHES WIDTH: 13.5 INCHES DEPTH: 22 INCHES STAINLESS STEEL CONSTRUCTION ADJUSTABLE HEIGHT LEGS PNEUMATIC REQUIREMENTS: 80 PSI AT 7 CUBIC FEET PER MINUTE MOTOR: 0.5 HORSEPOWER, 1725 RPM ELECTRICAL: 110 VOLTS, 50/60 HZ
|
🔒 Subscribe | ||
|
|
INLINE FILLING SYSTEM AUTOMATIC CAPPING SYSTEM WITH: CURRENT CAP SIZE: 24 MM VARIABLE SPEED CONTROLS CAP FEEDER DIAMETER: 24 INCHES HOPPER DIMENSIONS: LENGTH: 31INCHES WIDTH: 36.5 INCHES DEPTH: 26 INCHES STAINLESS STEEL CONSTRUCTION ADJUSTABLE HEIGHT LEGS PNEUMATIC REQUIREMENTS: 80 PSI AT 7 CUBIC FEET PER MINUTE MOTOR: 0.5 HORSEPOWER, 1725 RPM ELECTRICAL: 110 VOLTS, 50/60 HZ
|
🔒 Subscribe | |||
|
|
LANTECH | SW-3000 |
LANTECH SW-3000 AUTOMATIC SIDE SEAL SHRINK WRAPPER: SPEED: UP TO 75 PACKAGES PER MINUTE MAXIMUM PRODUCT DIMENSIONS: LENGTH: 40 INCHES WIDTH: 15 INCHES HEIGHT: 8 INCHES MINIMUM PRODUCT DIMENSIONS: LENGTH: 3 INCHES WIDTH: 1.5 INCHES HEIGHT: 1/8 INCH FILM ROLL SIZE: MINIMUM: 6 INCHES MAXIMUM: 24 INCHES CONVEYOR DIMENSIONS: WIDTH: 15 INCHES HEIGHT: 36 INCHES SEAL BAR WIDTH: 18 INCHES PRODUCT DETECTION SEALING MECHANISM: HOT KNIFE CONTINUOUS MOTION AIR REQUIREMENTS: 8-12 CUBIC FEET PER MINUTE AT 85 PSI ELECTRICAL REQUIREMENTS: 230 VOLTS, 60 HERTZ, 1 PHASE APPROXIMATE OVERALL DIMENSIONS: LENGTH: 153 INCHES WIDTH: 40 INCHES HEIGHT: 66 INCHES
|
🔒 Subscribe | |
|
|
USED AUTOMATIC PACKING MACHINE VERTICAL FORM FILL AND SEAL WITH: MAXIMUM BAG WIDTH: 6 INCHES SEAL JAW LENGTH: 6 INCHES DISCHARGE HEIGHT: 7 INCHES STAINLESS STEEL CONSTRUCTION
|
🔒 Subscribe | |||
|
|
USED ACCORDION CONVEYOR WITH: CONVEYOR WIDTH: 18 INCHES OVERALL CLOSED DIMENSIONS: LENGTH: 30 INCHES WIDTH: 24 INCHES HEIGHT: 32 INCHES STAINLESS STEEL CONSTRUCTION
|
🔒 Subscribe | |||
|
|
ACCUTEK | DOMINO A100 |
ACCUTEK DOMINO A100 INKJET PRINTER - USED ACCUTEK INKJECT PRINTER WITH: AUTOMATIC VISCOSITY CONTROL AUTOMATIC INK BLEED CONTROL 825 MILLIMETER CARTRIDGE WITH AUTOMATIC METER CHARACTER WIDTH AND HEIGHT ADJUSTMENT AUTO REPEAT/INVERSE/REVERSE ELECTRICAL: 110 VOLTS, 60 HZ, PHASE 1
|
🔒 Subscribe | |
|
|
ADVENT | 300 |
ADVENT 300 PRESSURE SENSITIVE LABEL APPLICATOR WITH: SPEED: UP TO 30 CONTAINERS PER MINUTE CONTAINER SIZE RANGE: ROUND CONTAINERS RANGING FROM 1 OUNCE TO 1 GALLON CONTAINER DIAMETER: MAXIMUM: 12 INCHES MINIMUM: 3/4 INCHES MINIMUM LABEL SIZE: LENGTH: 1 INCH WIDTH: 3/4 INCH MAXIMUM LABEL SIZE: LENGTH: 20 INCHES WIDTH: 8 INCHES ELECTRICAL REQUIREMENTS: 110 VOLTS, 60 HERTZ, 1 PHASE OVERALL DIMENSIONS: LENGTH: 26 INCHES WIDTH: 20 INCHES HEIGHT: 36 INCHES
|
🔒 Subscribe |
SEN-PACK
PACKAGING EQUIPMENT
SEN-PACK TRAY PACKER - USED SEN-PACK CASE PACKER WITH: SPEED: UP TO 30 CASES PER MINUTE, DEPENDING O...
Hammer Price:
🔒
2022 METTLER-TOLEDO TABLEX II V3
CHEMICAL PROCESSING EQUIPMENT
2022 METTLER-TOLEDO TABLEX II V3 STAINLESS STEEL GRAVITY FED METAL DETECTOR WITH: MAXIMUM SENSITIVIT...
Hammer Price:
🔒
MARQ HPE412-3(RH)DL
PACKAGING EQUIPMENT
MARQ HPE412-3(RH)DL TAPE BOTTOM SEAL CASE ERECTOR - USED MARQ TAPE BOTTOM SEAL CASE ERECTOR WITH: PR...
Hammer Price:
🔒
CLIMAX DP4-1/LD
PACKAGING EQUIPMENT
CLIMAX DP4-1/LD DROP CASE PACKER - USED CLIMAX PACKAGING DROP CASE PACKER WITH: STAINLESS STEEL CONS...
Hammer Price:
🔒
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
72" BY 12" PLASTIC MAT TOP CONVEYOR - USED CONVEYOR WITH: CONVEYOR DIMENSIONS: LENGTH: 72 INCHES WID...
Hammer Price:
🔒
VOLPAK S-200-D
PACKAGING EQUIPMENT
VOLPAK S-200-D HORIZONTAL FORM FILL AND SEAL WITH: SACHET DIMENSIONS: MINIMUM: HEIGHT: 60 MILLIMETER...
Hammer Price:
🔒
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
BELT INCLINE CONVEYOR 117" L X 11.5" W - USED BELT INCLINE CONVEYOR WITH: BELT DIMENSIONS LENGTH: 11...
Hammer Price:
🔒
VOLPAK S-200-D
PACKAGING EQUIPMENT
VOLPAK S-200-D HORIZONTAL FORM FILL AND SEAL WITH: SACHET DIMENSIONS: MINIMUM: HEIGHT: 60 MILLIMETER...
Hammer Price:
🔒
ROTARY ACCUMULATION TABLE-38
MISC
ROTARY ACCUMULATION TABLE-38 - USED ROTARY ACCUMULATION TABLE WITH: DIAMETER: 38 INCHES GUARD RAIL H...
Hammer Price:
🔒
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
SMOOTH RUBBER BLUE BELT CONVEYOR 10 FOOT LONG X 14 INCH WIDE - USED BLUE BELT CONVEYOR: CONVEYOR DIM...
Hammer Price:
🔒
WEXXAR BEL 252
PACKAGING EQUIPMENT
WEXXAR BEL 252 TOP AND BOTTOM MANUAL CASE TAPER WITH: OUTPUT: UP TO 25 CASES PER MINUTE DEPENDING ON...
Hammer Price:
🔒
MATEER
PACKAGING EQUIPMENT
MATEER AUGER FILLER - USED AUGER FILLER WITH: HOPPER CAPACITY: 5 GALLONS HOPPER INFEED DIAMETER: 16 ...
Hammer Price:
🔒
TELE-SONIC SB-180V
PACKAGING EQUIPMENT
TELE-SONIC SB-180V VERTICAL FORM FILL AND SEAL - USED TELE-SONIC VERTICAL FORM FILL AND SEAL WITH: O...
Hammer Price:
🔒
BILT-RITE F-4
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
BILT-RITE F-4 122" L BY 6" W SMOOTH TOP BELT CONVEYOR CONVEYOR DIMENSIONS: LENGTH: 122 INCHES WIDTH:...
Hammer Price:
🔒
LANGEN B1 O/L
PACKAGING EQUIPMENT
LANGEN B1 O/L AUTOMATIC HORIZONTAL GLUE CARTONER - USED LANGEN HORIZONTAL GLUE CARTONER WITH CARTON ...
Hammer Price:
🔒
NORMECCANICA BARREL LIFT
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
NORMECCANICA BARREL LIFT BARREL LIFT WITH: LIFT DIMENSIONS: LENGTH: 32 INCHES WIDTH: 20 INCHES MANUA...
Hammer Price:
🔒
GORING KERR TEKTAMET
MISC
GORING KERR TEKTAMET STAINLESS STEEL 2" H BY 9.5" W METAL DETECTOR - USED GORING KERR METAL DETECTOR...
Hammer Price:
🔒
LOVESHAW SP304
PACKAGING EQUIPMENT
LOVESHAW SP304 2 INCH TOP & BOTTOM CASE TAPER - USED LOVESHAW CASE TAPER WITH: TOP & BOTTOM TAPEHEAD...
Hammer Price:
🔒
2020 TAWI VACUMOVE VM40
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
2020 TAWI VACUMOVE VM40 VACUUM BOX LIFT ASSIST - USED TAWI VACUUM BOX LIFT ASSIST WITH: CAPACITY: 30...
Hammer Price:
🔒
WESTERN SCALE M2000A
MISC
WESTERN SCALE M2000A STAINLESS SCALE W 6 DIGIT INDICATOR. DISPLAY: 6 DIGITS. SPEED: UP TO 100 SAMPLE...
Hammer Price:
🔒
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
PLASTIC TABLETOP CONVEYOR 16 FOOT LONG X 24 INCH W - USED CONVEYOR WITH: PLASTIC TABLETOP BELT: LENG...
Hammer Price:
🔒
TALON SUPRA
PACKAGING EQUIPMENT
TALON SUPRA MICROWAVE POPCORN BAG SEALER WITH: SPEED UP TO 90 BAGS PER MINUTE STAINLESS STEEL CONSTR...
Hammer Price:
🔒
TALON MFG. SUPRA
PACKAGING EQUIPMENT
TALON MFG. SUPRA MICROWAVE POPCORN BAG MAKER WITH: SPEED: UP TO 300 BAGS PER MINUTE DEPENDING ON MAT...
Hammer Price:
🔒
ARPAC DELKOR SPOT-PAK 112-SS-24
PACKAGING EQUIPMENT
ARPAC DELKOR SPOT-PAK 112-SS-24 AUTOMATIC STAINLESS STEEL SHRINK BUNDLER WITH: SPEED: UP TO 25 BUNDL...
Hammer Price:
🔒
SOTA ULYM GW 7
PACKAGING EQUIPMENT
SOTA ULYM GW 7 BULK BAG FILLING SYSTEM - USED SOTA BULK BAG FILLER WITH: INFEED: DIAMETER: 8 INCHES ...
Hammer Price:
🔒
ALL FILL A-1200R
PACKAGING EQUIPMENT
ALL FILL A-1200R VERTICAL FORM FILL AND SEAL WITH VF200-HD VIBRATORY FEEDER WITH: OUTPUT: UP TO 60 C...
Hammer Price:
🔒
C.E. KING 36"
MISC
C.E. KING 36" STAINLESS STEEL ROTARY ACCUMULATION TABLE - USED ROTARY ACCUMULATION TABLE WITH: DIAME...
Hammer Price:
🔒
MATEER 31-A
PACKAGING EQUIPMENT
MATEER 31-A STAINLESS STEEL 5 GALLON HOPPER AUGER FILLER WITH SCALE - USED AUGER FILLER WITH SCALE W...
Hammer Price:
🔒
MISC
USED PACK OFF COLLECTION TABLE WITH: TABLE DIAMETER: 36 INCHES INFEED TABLE DIMENSIONS: LENGTH: APPR...
Hammer Price:
🔒
PERRY INDUSTRIES
MISC
PERRY INDUSTRIES STAINLESS STEEL ROTARY ACCUMULATION TABLE - USED PERRY INDUSTRIES ACCUMULATION TABL...
Hammer Price:
🔒
GONGDA
PACKAGING EQUIPMENT
GONGDA DRYING, FILLING, CAPPING, AND LABELING LINE - USED GONGDA BEVERAGE LINE WITH: FILLER/CAPPER: ...
Hammer Price:
🔒
NORDENPAC 700
PACKAGING EQUIPMENT
NORDENPAC 700 AUTOMATIC TUBE FILLER AND SEALER WITH: FILL RANGE: MINIMUM: 1 MILLILITER MAXIMUM: 600 ...
Hammer Price:
🔒
PACKAGING EQUIPMENT
USED STAINLESS STEEL TUBE FILLER WITH: NOZZLE DIAMETER: 1/8 INCH PUSH BUTTON CONTROLS ALLEN BRADLEY ...
Hammer Price:
🔒
UNIPAC SILVER TUBE FILLER
PACKAGING EQUIPMENT
UNIPAC SILVER TUBE FILLER WITH: PRODUCTION SPEED: UP TO 70 TUBES PER MINUTE TUBE SIZE RANGE: MINIMUM...
Hammer Price:
🔒
TOPFLEX E-256
PACKAGING EQUIPMENT
TOPFLEX E-256 L BAR SEALER WITH: SEAL JAW DIMENSIONS: LENGTH: 19 INCHES WIDTH: 17 INCHES CONVEYOR DI...
Hammer Price:
🔒
CDA 40 INCH ROTARY ACCUMULATION TABLE
MISC
CDA 40 INCH ROTARY ACCUMULATION TABLE - USED CDA ROTARY ACCUMULATION TABLE WITH: TABLE DIAMETER: APP...
Hammer Price:
🔒
PACKAGING EQUIPMENT
SACHET PACKET SEALER WITH: PACKET SIZE LENGTH: 5 INCHES WIDTH: 1.5 INCHES SEAL BAR LENGTH: 4 INCHES ...
Hammer Price:
🔒
PACKAGING EQUIPMENT
USED SACHET PACKET SEALER WITH: PACKET SIZE: LENGTH: 5 INCHES WIDTH: 1.5 INCHES SEAL BAR LENGTH: 4 I...
Hammer Price:
🔒
PACKAGING EQUIPMENT
USED SACHET PACKET SEALER WITH: PACKET SIZE: LENGTH: 4 INCHES WIDTH: 1.5 INCH SEAL BAR LENGTH: 4 INC...
Hammer Price:
🔒
MISC
USED AUGER FILLER WITH CONVEYOR WITH: NO BOWL NO AUGER CONVEYOR DIMENSIONS: LENGTH: 96 INCHES WIDTH:...
Hammer Price:
🔒
SIGNATURE
PACKAGING EQUIPMENT
SIGNATURE HEAT SHRINK TUNNEL WITH: APERTURE DIMENSIONS: LENGTH: 24 INCHES WIDTH: 12 INCHES CONVEYOR ...
Hammer Price:
🔒
COMPUTORQUE
PACKAGING EQUIPMENT
COMPUTORQUE AUTOMATIC CAPPING SYSTEM - USED INLINE FILLING SYSTEM AUTOMATIC CAPPING SYSTEM WITH: CUR...
Hammer Price:
🔒
PACKAGING EQUIPMENT
INLINE FILLING SYSTEM AUTOMATIC CAPPING SYSTEM WITH: CURRENT CAP SIZE: 24 MM VARIABLE SPEED CONTROLS...
Hammer Price:
🔒
LANTECH SW-3000
PACKAGING EQUIPMENT
LANTECH SW-3000 AUTOMATIC SIDE SEAL SHRINK WRAPPER: SPEED: UP TO 75 PACKAGES PER MINUTE MAXIMUM PROD...
Hammer Price:
🔒
PACKAGING EQUIPMENT
USED AUTOMATIC PACKING MACHINE VERTICAL FORM FILL AND SEAL WITH: MAXIMUM BAG WIDTH: 6 INCHES SEAL JA...
Hammer Price:
🔒
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
USED ACCORDION CONVEYOR WITH: CONVEYOR WIDTH: 18 INCHES OVERALL CLOSED DIMENSIONS: LENGTH: 30 INCHES...
Hammer Price:
🔒
ACCUTEK DOMINO A100
COMMERCIAL PRINTING & BINDERY EQUIPMENT
ACCUTEK DOMINO A100 INKJET PRINTER - USED ACCUTEK INKJECT PRINTER WITH: AUTOMATIC VISCOSITY CONTROL ...
Hammer Price:
🔒
ADVENT 300
PACKAGING EQUIPMENT
ADVENT 300 PRESSURE SENSITIVE LABEL APPLICATOR WITH: SPEED: UP TO 30 CONTAINERS PER MINUTE CONTAINER...
Hammer Price:
🔒