Quarterly Food and Beverage Packaging Equipment Auction

REJVES FOUR STATION SNAP CAPPER WITH: SNAP CAP: 1.5 INCHES INFEED/DISCHARGE: 37 INCHES CONVEYOR WIDTH: 3.25 INCH PRODUCTION SPEED: UP TO 45 BOTTLES PER MINUTE DEPEDING ON PRODUCT LENGTH: 27 INCHES APERTURE: 3 INCHES LANING REJECT ELECTRICAL: 480 VOLTS, 3 PHASE, 60 HERTZ, 20 AMPS ELAVATING CONVEYOR: HOPPER DIMENSIONS: LENGTH: 18.25 INCHES WIDTH: 31.25 INCHES DEPTH: 29 INCHES 20 GALLONS LIFT DIMESNIONS: FLIGHT: 6.5 INCHES WIDTH: 7.75 INCHES CLEAT HEIGHT: 1.5 INCHES DISCHARGE: 64.5 INCHES FROM GROUND INFEED: 39.5 INCHES FROM GROUND DELSA CAP UNSCRAMBLER: 45 INCH INFEED INFEED DIMENSIONS: DIAMETER: 21 INCHES FLIGHTS: 2 INCHES DEPTH: 6.5 INCHES DISCHARGE: 45 INCHES WIDTH OF FEED: 1.5 INCHES (ADJUSTABLE) ELECTRICAL: 480 VOLTS, 60 HZ, PHASE 3

PEARSON MP35 MULTI-PACKER WITH: OUTPUT: UP TO 30 CASES PER MINUTE IN-LINE INFEED: (6) 4 PACK CARRIER BASKETS (4) 6 PACK CARRIER BASKETS (3) 8 PACK CARRIER BASKETS CROSS FLOW INFEED: (4) 6 PACK CARRIER BASKETS CARRIER SIZES: LENGTH: 6.75-11.75 INCHES WIDTH: 4.75-5.5 INCHES DEPTH: 2.5-5.75 INCHES CASE SIZES: LENGTH: 10-21 INCHES WIDTH: 10-17 INCHES HEIGHT: 4-10 INCHES DUAL LANE BRUSH DRIVE INFEED: LENGTH: 140 INCHES WIDTH: 7.5 INCHES EACH LANE CASE INFEED: LENGTH: 73 INCHES WIDTH: 10 INCHES 90 DEGREE CASE DISCHARGE: LENGTH: 74 INCHES WIDTH: 10 INCHES PRODUCT RAM CASE STOP ALLEN BRADLEY HMI AIR REQUIREMENTS: 80 PSI ELECTRICAL REQUIREMENTS: 460 VOLT, 60 HZ, 3 PH

APM MFA-26-P SHRINK BUNDLER AND HEAT TUNNEL - USED APM SHRINK BUNDLER WITH: FILM WIDTH: 22 INCHES DUAL LANE INFEED: 4 INCHES WIDE (EACH) SECO GUAGES SHRINK TUNNEL WIDTH: 17 INCHES HEIGHT: 16 INCHES STEEL MESH CONVEYOR DISCHARGE: 36 INCHES PUSH BUTTON CONTROLS ELECTRICAL: 480 VOLTS, 3 PH, 60 HZ STAINLESS STEEL CONTACT SURFACES

INTEGRITY MACHINE SERVICES FIVE HEAD FOIL SEALER - USED INTEGRITY MACHINE FOIL SEALER WITH: 5 HEAD FOIL APPLICATION UP TO 90 TABS PER MINUTE DEPENDING ON PRODUCT TAB SIZE: 38 MILLIMETER INCLUDES PRODUCT CONVEYOR 4.5 INCH WIDTH 58 INCH LENGTH 42 INCH INFEED/DISCHARGE HEIGHT ELECTRICAL: 240 VOLTS, 60 HZ, PHASE 1

COBALT 100 SERIES SEMI AUTOMATIC CASE FORMER: USED TO SQUARE AND TAPE MANUALLY OPENED BLANKS TO EITHER BE LOADED WHILE IN PLACE OR SENT DOWN THE LINE. OUTPUT: UP TO 15 CASES PER MINUTE DEPENDING ON APPLICATION AND USER DEXTERITY. CASE DIMENSIONS: LENGTH: 7-24 INCHES WIDTH: 7-19 INCHES MINIMUM HEIGHT: 6 INCHES. HAND ADJUSTMENTS. SLIDING TAPE HEAD: 2 INCHES WIDE. BUTTON TO MOVE THE CASE OUT OF THE ERECTING AREA ONCE COMPLETED OR DONE LOADING. CASTERS. ELECTRICAL: VOLTS: 115 FREQUENCY: 60HZ PHASE 1 AMPS: 15. AIR REQUIREMENTS: 80 PSI. STAINLESS STEEL CONSTRUCTION.

COBALT 100 SERIES SEMI AUTOMATIC CASE FORMER: USED TO SQUARE AND TAPE MANUALLY OPENED BLANKS TO EITHER BE LOADED WHILE IN PLACE OR SENT DOWN THE LINE. OUTPUT: UP TO 15 CASES PER MINUTE DEPENDING ON APPLICATION AND USER DEXTERITY. CASE DIMENSIONS: LENGTH: 7-24 INCHES, WIDTH: 7-19 INCHES, MINIMUM HEIGHT: 6 INCHES. HAND ADJUSTMENTS. SLIDING TAPE HEAD: 2 INCHES WIDE. BUTTON TO MOVE THE CASE OUT OF THE ERECTING AREA ONCE COMPLETED OR DONE LOADING. CASTERS. ELECTRICAL: VOLTS: 115, FREQUENCY: 60HZ, PHASE 1, AMPS: 15. AIR REQUIREMENTS: 80 PSI. STAINLESS STEEL CONSTRUCTION.

COBALT 100 SERIES SEMI AUTOMATIC CASE FORMER: NEEDS SOME WORK DONE TO AIR LINES. USED TO SQUARE AND TAPE MANUALLY OPENED BLANKS TO EITHER BE LOADED WHILE IN PLACE OR SENT DOWN THE LINE. OUTPUT: UP TO 15 CASES PER MINUTE DEPENDING ON APPLICATION AND USER DEXTERITY. CASE DIMENSIONS: LENGTH: 7-24 INCHES, WIDTH: 7-19 INCHES, MINIMUM HEIGHT: 6 INCHES. HAND ADJUSTMENTS. SLIDING TAPE HEAD: 2 INCHES WIDE. BUTTON TO MOVE THE CASE OUT OF THE ERECTING AREA ONCE COMPLETED OR DONE LOADING. CASTERS. ELECTRICAL: VOLTS: 115, FREQUENCY: 60HZ, PHASE: 1, AMPS: 15. AIR REQUIREMENTS: 80 PSI. STAINLESS STEEL CONSTRUCTION.

CAPMATIC TECHNIC 2 SX LABELER

COBALT 100 SERIES SEMI AUTOMATIC CASE FORMER: *** NO TAPE HEAD *** USED TO SQUARE AND TAPE MANUALLY OPENED BLANKS TO EITHER BE LOADED WHILE IN PLACE OR SENT DOWN THE LINE OUTPUT: UP TO 15 CASES PER MINUTE DEPENDING ON APPLICATION AND USER DEXTERITY CASE DIMENSIONS: LENGTH: 7-24 INCHES WIDTH: 7-19 INCHES MINIMUM HEIGHT: 6 INCHES HAND ADJUSTMENTS SLIDING TAPE CARRIAGE BUTTON TO MOVE THE CASE OUT OF THE ERECTING AREA ONCE COMPLETED OR DONE LOADING CASTERS ELECTRICAL: VOLTS: 115 FREQUENCY: 60HZ PHASE 1 AMPS: 15 AIR REQUIREMENTS: 80 PSI STAINLESS STEEL CONSTRUCTION

COBALT 100 SERIES SEMI AUTOMATIC CASE FORMER: USED TO SQUARE AND TAPE MANUALLY OPENED BLANKS TO EITHER BE LOADED WHILE IN PLACE OR SENT DOWN THE LINE. OUTPUT: UP TO 15 CASES PER MINUTE DEPENDING ON APPLICATION AND USER DEXTERITY. CASE DIMENSIONS: LENGTH: 7-24 INCHES, WIDTH: 7-19 INCHES, MINIMUM HEIGHT: 6 INCHES. HAND ADJUSTMENTS. SLIDING TAPE HEAD: 2 INCHES WIDE. BUTTON TO MOVE THE CASE OUT OF THE ERECTING AREA ONCE COMPLETED OR DONE LOADING. CASTERS. ELECTRICAL: VOLTS: 115, FREQUENCY: 60HZ, PHASE 1, AMPS: 15. AIR REQUIREMENTS: 80 PSI. STAINLESS STEEL CONSTRUCTION.

CAPMATIC TECHNIC 2 DX LABELER

HAVER & BOECKER NWED7480 H/MECIII NET WEIGHER. MAXIMUM WEIGHT: 60 KILOGRAMS. MINIMUM WEIGHT: 25 KILOGRAMS. EMERGENCY E STOP PUSH BUTTON. HAVER & BOECKER BAGGING UNIT. BAG TYPE LAST RUNNING: TOP OPEN PE BAG. LAST RAN BAG SIZE: LENGTH: 550 TO 800 MILLIMETERS. WIDTH: 340 TO 420 MILLIMETERS. GUSSET DEPTH: 40 TO 100 MILLIMETERS. FILM THICKNESS: 100 TO 200 U. INNER REEL CORE: 150 MILLIMETERS. FILM SPECIFICATIONS: 4.911.0023.09. MAXIMUM WEB WIDTH: 25 INCHES.

KLOCKNER BARTELT RPM 950 HORIZONTAL ROTARY FORM, FILL & SEAL - KLOCKNER BARTELT HORIZONTAL FORM, FILL & SEAL POUCH MACHINE: ROTARY TURRET HORIZONTAL FORM, FILL & SEAL POUCH MACHINE 8 STATIONS 7.25 INCH GRIPPER ARM 10.5 INCH SEAL BAR SPEED: UP TO 75 PPM MAXIMUM ROLL DIAMETER: UP TO 24 INCHES POUCH SIZE RANGE: WIDTH: 4.5 INCHES TO 9.5 INCHES HEIGHT: 4.5 TO 14 INCHES DISCHARGE CONVEYOR ZIPPER ATTACHMENT HOLEPUNCH ATTACHMENT OVERFILL DISCHARGE ELECTRONICS: 480 VOLTS 60 HERTZ 3 PHASE LAST RUNNING 6 OZ BAGS OF TOBACCO 8 INCHES WIDE

TAYLOR MANUFACTURING 96X60 MASS FLOW ACCUMULATION TABLE - USED ACCUMULATION TABLE WITH: STEEL MESH CONVEYOR INFEED HEIGHT: 43 INCHES CONVEYOR DIMENSIONS: 96 INCHES WIDE X 60 INCHES LONG MOTOR: HORSEPOWER: 37 RPM: 1750 ELECTRICAL: VOLTS: 600 FREQUENCY: 60 HZ PHASE 3

MASSMAN AUTOMATION HFFS-IM0800 FLEXIBLE POUCH PACKAGING SYSTEM - USED MASSMAN AUTOMATION HORIZONTAL FORM FILL AND SEAL SYSTEM WITH: PRODUCTION SPEED: UP TO 50 STAND UP POUCHES PER MINUTE PRODUCT LAST RAN: CRYOGENIC ICE CREAM PRODUCTION SPEED LAST RAN: 105 POUCHES PER MINUTE PREVIOUSLY RAN POUCH SIZE: 3 OUNCE POUCH 3.5 X 5.5 INCHES POUCH SIZE MINIMUM: 3.5 X 5.5 INCHES POUCH SIZE MAXIMUM: UP TO 6 X 10 INCHES INTERMITTENT MOTION PRODUCT SEPARATING KNIFE POUCH OPENING SYSTEM NO POUCH/NOT OPEN, NO FIL SENSOR PRODUCT SUPPORT CONVEYOR PRODUCT FILL DETECTION WITH AIR REJECT PRODUCT SEALER PRODUCT DISCHARGE CONVEYOR (2) 3 HEAD JACKETED AMS AUGER FEEDERS HOPPER DIMENSIONS: LENGTH: 30 INCHES WIDTH: 16 INCHES DEPTH: 15 INCHES 1 INCH DIAMETER DISCHARGE AUGER DIMENSIONS: WIDTH: 1.5 INCHES FLIGHTS: 1.5 INCHES SIDE SCRAPES FOR EACH FUNNEL HOLE PUNCH ASSEMBLY ALLEN BRADLEY CONTROLS SERVO DRIVEN PRINT REGISTERED ELECTRICALS: VOLTAGE: 480 FREQUENCY: 60 HERTZ AMPERAGE: 60 PHASE: 3

AUTOMATIC LABELLING MACHINE - USED AUTOMATIC LABELER WITH: AUTOMATIC MONOBLOCK COLD GLUE LABELER PREVIOUSLY RAN 12 OZ BEER BOTTLES APPLIED FRONT, BACK AND NECK LABELS 24 LABELING STATIONS INFEED DIMENSIONS: HEIGHT: 49 INCHES WIDTH: 3.5 INCHES TIMING WHEEL PRODUCT DIAMETER: 2 INCHES PROTECTIVE GUARDING SIEMENS TOUCHSCREEN HMI PUSH START/STOP BUTTONS STAINLESS STEEL CONSTRUCTION ELECTRICS: VOLTS: 460 PHASE:1 HERTZ:60

2016 MASSMAN HFFS-IM1000 FLEXIBLE POUCH PACKAGING SYSTEM MASSMAN HORIZONTAL FILL & SEAL FLEXIBLE POUCH PACKAGER. 60-70 PACKAGES PER MINUTE PREMADE OR ROLLSTOCK PRINTED FILM CURRENTLY CONFIGURED FOR 1 OZ, 2.5 OZ AND 3 OZ BAGS OF PRODUCT CAPABLE OF MAKING GUSSET BOTTOM POUCHES. DUAL LEVEL PLATFORM MADE BY STONE ENT. OF OMAHA, NE 2 LEVEL SO THAT THE VIBRATING HOPPER IS ON A SEPARATE LEVEL AND PLATFORM FROM THE SCALE TO ISOLATE THE MOVEMENT OF WORKER AND VIBRATING HOPPER. LARGE MAIN LEVEL TO ALLOW FOR CLEANING OF THE SCALE EQUIPMENT ON THE PLATFORM VERSUS REMOVING TO GROUND LEVEL. VC999 HIGH SPEED MULTIHEAD WEIGHER. WASH DOWN TYPE IP66 MODEL BMT-114X1.3 HS GRAVITY FEED METAL DETECTOR INLINE BETWEEN MULTIHEAD WEIGHER AND BAGGER. ENSIGHT SOLUTIONS COLUMN LIFT USED AS AN ELEVATOR SYSTEM TO GET CARTS OF PRODUCT TO TOP LEVEL OF PLATFORM. THIS COULD BE EXCLUDED AND A CONVEYOR SYSTEM OR OTHER MEANS COULD BE USED TO FEED PRODUCT TO THE WEIGHER. LAST RUNNING: BEEF JERKY THE BELOW BAGS ARE WHAT IT IS SET UP FOR. THE ONLY MAJOR TOOLING CHANGEOVER IS SIMPLY CHANGING THE SPACING OF THE BAG GRABBING FINGERS WITH A METAL SPACER DEVICE, THEREFORE, CHANGING TO OTHER SIZES SHOULD NOT BE A PROBLEM. 2.5 OZ JERKY BAG WITH ZIPPER 6 WIDE X 8 TALL. 3.0 OZ BOTTOM GUSSET BAG. 130 MM WIDE BY 205 MM LONG. THE LENGTH IS EASILY ADJUSTABLE. 1.0 OZ SAME WIDTH AS 3.0 OZ.

2008 PEARSON BE60 6-PACK BEVERAGE CARRIER ERECTOR WITH TWIN LANE CONVEYOR. OUTPUT RATE: UP TO 60 CASES PER MINUTE, DEPENDING ON SIZE. CHAIN DRIVEN BELT. OUTFEED DIMENSIONS: HEIGHT: 43.5 INCHES, WIDTH: 10.5 INCHES. RELIABLY SETS UP: 4 & 6 PACK CANADIAN STYLE DOMESTIC, 4 & 6 PACK US STYLE EXPORT CARRIERS. MAGAZINE LENGTH: 80 INCHES. ELECTRICS: VOLTS: 460, HERTZ: 60, PHASE: 3.

KALISH 5404 BANDIT SINGLE CHUCK CAPPER WITH: SINGLE CHUCK ADJUSTABLE CHUCK TORQUE ADJUSTABLE CAPPING HEIGHT VARIABLE SPEED VOLTAGE110 ELECTRICAL PHASE1PH HERTZ60HZ AMPERAGE2

KALISH 5130 PUSH THROUGH SINGLE CHUCK CAPPER WITH: SINGLE CHUCK VARIABLE SPEED CONTROLS ADJUSTABLE CHUCK DOWN FORCE ADJUSTABLE CHUCK SPIN SPEED MANUAL HEIGHT ADJUSTMENT STAR WHEEL CONVEYOR STAINLESS STEEL CONSTRUCTION

GATES WICKET WIZARD EZ2000 AUTOMATIC BAGGER/SEALER WITH: STAINLESS STEEL CONSTRUCTION UP TO 30 BAGS PER MINUTE BAG WIDTH: 3 INCHES UP TO 15 INCHES BAG LENGTH: UP TO 21 INCHES LONG NEMA 4X - HIGH PRESSURE WASH DOWN - 12 PSI LOCKOUT/TAGOUT HAS BOTH VACUUM AND NITROGEN FLUSH CAPABILITY

HAYSSEN ULTIMA VERTICAL FORM FILL AND SEAL BAGGER ONLY - USED HAYSSEN ULTIMA WITH: OUTPUT: UP TO 100 BAGS PER MINUTE MINIMUM BAG DIMENSIONS: LENGTH: 3 INCHES WIDTH: 2 INCHES MAXIMUM BAG DIMENSIONS: LENGTH: 8 INCHES WIDTH: 8 INCHES AIR REQUIREMENTS: 65 PSI ELECTRICAL: 230 VOLTS, 1 PH, 60 HZ

2016 PEARSON CE60-TL CASE ERECTOR AND BOTTOM GLUE SEALER - USED CASE ERECTOR AND BOTTOM GLUE SEALER WITH: OUTPUT RATE: UP TO 55 CASES PER MINUTE ERECTED CASE SIZE RANGE: LENGTH: 12 INCHES TO 23 INCHES WIDTH: 5.5 INCHES TO 16 INCHES OPEN DEPTH: 5.5 INCHES TO 22.5 INCHES KNOCKED-DOWN SIZES: LENGTH: 17.5 INCHES TO 36 INCHES WIDTH: 8.25 INCHES TO 30.5 INCHES BOTTOM FLAP WIDTH: 3 INCHES TO 8 INCHES CHAIN DRIVEN BELT INFEED WIDTH: 4.5 INCHES HOT MELT GLUE UNIT ALLEN-BRADLEY PLC ELECTRICAL: 460 VOLTS, 3 PH, 60 HZ RIGHT HAND CASE MACHINE