Industrial Electronic Manufacturing Process Equipment Parts Tools Day 3 of 3 day event

PVA CONFORMAL COATING MACHINE. PARTS MACHINE. S/N: W1507

(4) DARCOR DOUBLE WHEEL BLACK SWIVEL TYPE RUBBER CASTER WHEELS. SWIVEL TYPE WHEEL DIAMETER: 3" WHEEL THICKNESS: 2" WHEEL MATERIAL: RUBBER BASE DIMENSIONS: 2.75" X 3.75" BOLT HOLE WIDTH: 1.75" X 3"

[CKD 3GA1669-A2NH SOLENOID VALVES (6) W/ N4G1A1-V1 MANIFOLD BLOCK] SOLENOID VALVE DIN RAIL MOUNTING VOLTAGE: 24 VDC AIR INLET: 5/16" OUTLETS: 6 MM FLYING LEADS TO EACH VALVE CKD N4G1 BLOCK MANIFOLD FLUID: COMPRESSED AIR MINIMUM WORKING PRESSURE: 0.2 MPA MAX WORKING PRESSURE: 0.7 MPA AMBIENT TEMPERATURE: -5 TO 55 C FLUID TEMPERATURE: 5 TO 55 C CKD N4G1-Q SOLENOID VALVE EXHAUST MANIFOLD CKD N4G1-ER SOLENOID VALVE END BLOCK SUNX S LINK SL-VTP16C1 FLEXIBLE WIRE SAVING SYSTEM SPECIFICATIONS: MANUFACTURER: SUNX MODEL: SL-VTP16C1 SERIES: S LINK V FLEXIBLE WIRE SAVING SYSTEM MADE IN JAPAN

[GRANITE MACHINE BLOCK/SURFACE PLATE] 42.25"L X 11.5"W X 8"H ~45 DEGREE ANGLE SIDE. MANUFACTURER: UNBRANDED. MODEL: DOES NOT APPLY. INDUSTRIAL MACHINE SURFACE PLATE. MATERIAL: GRANITE. LENGTH: 42.25". WIDTH: 11.5". HEIGHT: 8". ~45 DEGREE ANGLED SIDE. SKU: X30B007 5G-02-02(1) 455LBS - 52IN X 40IN X 28IN. CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THE MACHINE SURFACE BLOCK IS IN GOOD, USED CONDITION WITH NO STRUCTURAL CRACKS. THERE ARE SOME MINOR SCUFFS AND SCRATCHES FROM PREVIOUS USE AND INSTALLATION. WE ARE NOT SURE WHAT GRADE THE SURFACE IS. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THE BLOCK WAS REMOVED FROM A DECOMMISSIONED MACHINE. NO FURTHER TESTING WAS PERFORMED AFTER REMOVAL. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) GRANITE MACHINE BLOCK/SURFACE PLATE.

[WRIGHT TOOL 5834] 6-POINT #5 SPLINE DRIVE IMPACT SOCKET 4140 ALLOY STEEL 1.85LBS MANUFACTURER: WRIGHT TOOL MODEL: 5834 DESCRIPTION: 6-POINT #5 SPLINE DRIVE IMPACT SOCKET SIZE: 1-1/16" LENGTH: 3-3/16" SOCKET DIAMETER: 1-3/4" DRIVE DIAMETER: 2-3/8" MATERIAL: 4140 ALLOY STEEL WEIGHT: 1.85LB

[INTERNAL TOOL 62-1405] DOUBLE-END ENGRAVING TOOL TIP DIAMETER: 0.0150" INCLUDED ANGLE: 60-DEGREES SHANK DIAMETER: 0.1250" OVERALL LENGTH: 2.0000" [INTERNAL TOOL 62-2230] RADIUS TIP ENGRAVING TOOL TIP RADIUS: 0.015" INCLUDED ANGLE: 40-DEGREES SHANK DIAMETER: 0.1250" OVERALL LENGTH: 2.0000" [INTERNAL TOOL 62-2400] CHISEL STYLE ENGRAVING TOOL TIP DIAMETER: 0.0020" INCLUDED ANGLE: 40-DEGREES SHANK DIAMETER: 0.1250" OVERALL LENGTH: 2.0000"

[4] WAGNER SPARTAN 4" LIGHT DUTY BALL BEARING SWIVEL CASTER WHEELS S/N: S18B012 2I-03-01(12) - MANUFACTURER: WAGNER MODEL: SPARTAN CONDITION: NEW OTHER. COMES IN NON ORIGINAL PACKAGING. THE CASTERS ARE UNUSED BUT SHOW SIGNS OF SHELF WEAR/ STORAGE. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (4) WAGNER 4" DIAMETER LIGHT DUTY BALL BEARING SWIVEL CASTER WHEELS SPECIFICATIONS: MANUFACTURER: WAGNER MODEL: DOES NOT APPLY INDUSTRIAL CASTER WHEELS WHEEL DIAMETER: 4" WHEEL WIDTH: 1" SWIVEL TYPE: BALL BEARING, DOUBLE ROW SWIVEL RADIUS: 3.25" 5/16" DIAMETER NUT AND BOLT AXLE ZINC PLATED FINISH FOR CORROSION RESISTANCE AND APPEARANCE SPARTAN SUPREME SERIES WHEELS WITH BLACK HARD RUBBER TREAD MADE IN USA 8LBS - 10IN X 10IN X 10IN

[COPELAND KAJ3-0100-CAB] COPELAMETIC 230V 60HZ 1 PHASE 5.4 RLA COMPRESSOR. MANUFACTURER: COPELAND MODEL: KAJ3-0100-CAB DESCRIPTION: COMPRESSOR POWER: VOLTAGE: 230 NOMINAL HP: 3/4 HERTZ: 60 PHASE: 1 R.L.A: 5.4 L.R.A: 33.5 B/M: 214 SERIES: COPELAMETIC AIR-COOLED SKU: X24G014 5G-21-02(1) 96LBS - 22IN X 14IN X 12IN

[MPM SPEEDLINE 12] OPEN CENTER EDGE SUPPORT BOARD PCB CONVEYOR 5-50CM WIDE. MANUFACTURER: MPM SPEEDLINE P/N: 181187D. OPEN-CENTER BELT CONVEYOR SUPPORTS CIRCUIT BOARD OR PALLET ON THE EDGE CONVEYOR LENGTH: 12" CONVEYOR WIDTH: 5CM TO 50CM STEP MOTOR DRIVES A SCREW FOR WIDTH ADJUSTMENT STEP MOTORS DRIVE CONVEYOR BELTS (2) LINEAR MOTION GUIDE RAILS, (1) BEARING PER RAIL THICK AND SWOOPY ALUMINUM MOUNTING BRACKETS ALUMINUM CONSTRUCTION (1) OPTICAL END LIMIT SWITCH FOR WIDTH MAXIMUM ADJUSTMENT (2) PRODUCT SENSORS ON CONVEYOR LINEAR RAILS: THK SR15 RAIL LENGTH, EACH: 62 CM RAIL SEPARATION: 17.5 CM CENTER TO CENTER BELT HEIGHT FROM MOUNTING PLANE: 21.5CM BRACKET ON WIDTH-ADJUSTING MOTOR END SWOOPS TO "RIGHT" SIDE SCREW PITCH: 5 TURNS/CM SCREW HAS BALL-BEARING END SUPPORT CONVEYOR MOTORS: DANAHER MOTION/PACIFIC SCIENTIFIC M22NSHB-LNN-NS-02 POWERMAX II SERIES 95 WATTS 2.3A 1.8O STEP MOTOR VS: 65V RATED SPEED: 1500RPM CONVEYOR WIDTH: M22NSHB-LNN-NS-02 POWERMAX II SERIES 70 WATTS 4.6A 1.8O STEP MOTOR VS: 24V RATED SPEED: 1500RPM MOTOR DRIVES: COPLEY CONTROLS CORP. 800-1543 STEPNET SERIES STEPPER CONTROL INPUT: 20-75VDC 8A OUTPUT: TO 75V, 5A CONTINUOUS, 7A PEAK DRIVES (1) AXIS EACH. SKU: X16D009 5I-09-02(1) 48LBS - 33IN X 16IN X 14IN

[SANDVIK COROMANT 5756882 WPMT21.51 MF 1125 CARBIDE TURNING INSERT] (23) - MANUFACTURER: SANDVIK COROMANT MODEL: 5756882 CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THESE CARBIDE INSERTS WERE VERY SLIGHTLY USED AND CAREFULLY INSPECTED FOR FLAWS. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: THESE CARBIDE INSERTS WERE VERY SLIGHTLY USED AND CAREFULLY INSPECTED FOR FLAWS. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (23) SANDVIK COROMANT 5756882 WPMT21.51 MF 1125 CARBIDE TURNING INSERT SPECIFICATIONS: MANUFACTURER: SANDVIK COROMANT MODEL: 5756882 ISO NO: WPMT 04 02 04-MF 1125 DESCRIPTION: WPMT21.51 MF 1125 TRIGON CARBIDE TURNING INSERT INSCRIBED CIRCLE: 0.2500" (6.35MM) LENGTH: 0.1553" (3.94MM) THICKNESS: 0.0938" (2.38MM) CORNER RADIUS: 0.0156" (0.3969MM) HOLE DIAMETER: 0.1102" (2.80MM) MANUFACTURER'S GRADE: 1125 CHIP BREAKER: MF SKU: T05U012 2D-01-02(2) 2LBS - 6IN X 6IN X 4IN

[NEW] CRAIN 426 SPREADING TROWEL 11" X 4.5" NOTCHED 1/4 X 1/4 X 1/4 DEEP. MANUFACTURER: CRAIN MODEL: 426 CONDITION: NEW OTHER. COMES IN FACTORY ORIGINAL PACKAGING. INCLUDES: (8) CRAIN NO. 426 PROFESSIONAL TROWELS SPECIFICATIONS: MANUFACTURER: CRAIN MODEL: 426 DESCRIPTION: PROFESSIONAL NOTCHED TROWEL BLADE MATERIAL: HARDENED SPRING STEEL HANDLE TYPE: CURVED HARDWOOD TROWEL SIZE: 11.00" X 4.50" CONDITION: NEW QUANTITY: 8 TROWELS. SKU: O15P026 1B-02-04(1) 10LBS - 22IN X 15IN X 8IN

DESIGN & ASSEMBLY CONCEPTS MULTI MODULE STANDARD LEAK TESTER S/N: 001245

[MPM SPEEDLINE] 12" OPEN CENTER EDGE SUPPORT BOARD PCB CONVEYOR 5-50CM WIDE - MANUFACTURER: MPM SPEEDLINE MODEL: 1811886 CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THIS ITEM IS IN FAIR COSMETIC CONDITION WITH MINOR SCUFFS/SCRATCHES AND SOME GREASY RESIDUE ESPECIALLY ON THE RAILS, FROM PRIOR USE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS WAS REMOVED FROM A DECOMMISSIONED MPM SPEEDLINE SCREENPRINTER. THE SCREW TURNS BY HAND WITH MODERATE FINGERTIP PRESSURE AND ADJUSTS CONVEYOR WIDTH. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) MPM 1811886 EDGE BELT CONVEYOR SPECIFICATIONS: MANUFACTURER: MPM SPEEDLINE P/N: 1811886 OPEN-CENTER BELT CONVEYOR SUPPORTS CIRCUIT BOARD OR PALLET ON THE EDGE CONVEYOR LENGTH: 12" CONVEYOR WIDTH: 5CM TO 50CM STEP MOTOR DRIVES A SCREW FOR WIDTH ADJUSTMENT STEP MOTORS DRIVE CONVEYOR BELTS (2) LINEAR MOTION GUIDE RAILS, (1) BEARING PER RAIL THICK AND SWOOPY ALUMINUM MOUNTING BRACKETS ALUMINUM CONSTRUCTION (1) OPTICAL END LIMIT SWITCH FOR WIDTH MAXIMUM ADJUSTMENT (2) PRODUCT SENSORS ON CONVEYOR LINEAR RAILS: THK SR15 RAIL LENGTH, EACH: 62 CM RAIL SEPARATION: 17.5 CM CENTER TO CENTER BELT HEIGHT FROM MOUNTING PLANE: 21.5CM BRACKET ON WIDTH-ADJUSTING MOTOR END SWOOPS TO "LEFT" SIDE SCREW PITCH: 5 TURNS/CM SCREW HAS BALL-BEARING END SUPPORT CONVEYOR MOTORS: DANAHER MOTION M22NSHB-LNN-NS-02 POWERMAX II SERIES 95 WATTS 2.3A 1.8O STEP MOTOR VS: 65V RATED SPEED: 1500RPM CONVEYOR WIDTH: M22NSHB-LNN-NS-02 POWERMAX II SERIES 70 WATTS 4.6A 1.8O STEP MOTOR VS: 24V RATED SPEED: 1500RPM MOTOR DRIVES: COPLEY CONTROLS CORP. 800-1543 STEPNET SERIES STEPPER CONTROL INPUT: 20-75VDC 8A OUTPUT: TO 75V, 5A CONTINUOUS, 7A PEAK DRIVES (1) AXIS EACH SKU: X16D010 5A-07-01(1) 44LBS - 32IN X 17IN X 13IN

[TIG STAR TS10N48L] TIG STAR TS10N48L #6L LONG CERAMIC NOZZLE 3/8" 10MM (60) - MANUFACTURER: TIG STAR MODEL: TS10N48L CONDITION: NEW OTHER. THESE NOZZLES ARE IN A NEW AND UNUSED COSMETIC CONDITION AND COME INDIVIDUALLY PACKAGED IN THE ORIGINAL TIG STAR BOX THAT DOES SHOW SOME SIGNS OF SHELF WEAR AND OCCASIONALLY WRITING ON THE OUTSIDE OF THE BOX. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (60) TIG STAR TS10N48L #6L LONG CERAMIC NOZZLE SPECIFICATIONS: MANUFACTURER: TIG STAR MODEL: TS10N48L DESCRIPTION: LONG CERAMIC TIG WELDING CUP NOZZLE #6L 3/8" 10MM SKU: U51H020 4B-04-02(1) 6LBS - 12IN X 8IN X 6IN

[IKO LWHSG20] BALL BEARING GUIDE BLOCKS W/ IKO 16 1/8" & 8 5/8" RAILS. MANUFACTURER: IKO, MODEL: LWHSG20. CONDITION: USED. COMES IN NON ORIGINAL PACKAGING. THE ITEMS ARE IN USED CONDITION WITH SCUFFS, SCRATCHES AND SOME RESIDUE FROM PREVIOUS USE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THE ITEMS WERE REMOVED FROM DECOMMISSIONED ENVIRONMENTS. THE GUIDE BLOCKS MOVE ALONG THE GUIDE RAILS WITH NO OBSTRUCTION. NO FURTHER TESTING WAS PERFORMED AFTER REMOVAL. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (3) IKO LWHSG20 LINEAR GUIDE BLOCKS (1) IKO 16 1/8" GUIDE RAIL (1) IKO 8 5/8" GUIDE RAIL. SPECIFICATIONS: MANUFACTURER: IKO, MODEL: LWHSG20 BALL BEARING GUIDE BLOCKS WITH LINEAR GUIDE RAILS. RAIL LENGTH: 16 1/8" (1), RAIL LENGTH: 8 5/8" (2), RAIL HEIGHT: 18.27 MM, RAIL WIDTH: 20.33 MM, BLOCK LENGTH: 107.35 MM, BLOCK WIDTH: 43.70 MM, BLOCK HEIGHT: 23.78 MM, BLOCK HEIGHT W RAIL: 29.91 MM.

[UNBRANDED] INDUSTRIAL BALL SCREW ASSEMBLY TOTAL LENGTH: 25" SHAFT TYPE: ROLLED, SINGLE START BALL SCREW LENGTH: 16" BALL SCREW DIAMETER: 2.5" SHAFT DIAMETER: 1.5" PITCH/LEAD: 6.5 MM MOUNT BOLT DIAMETER: .75" THE BALL SCREW ASSEMBLY IS IN GOOD, USED CONDITION WITH SOME SCUFFS, SCRATCHES, AND RESIDUE FROM PREVIOUS USE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. THE BALL SCREW ACTUATES ALONG THE SHAFT WITH NO OBSTRUCTION. NO FURTHER TESTING WAS PERFORMED AFTER REMOVAL. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) 25" L SINGLE START ROLLED BALL SCREW ASSEMBLY 16" BALL SCREW 6.5MM PITCH/LEAD

ONE DOLLY WITH SOLID TIRES, EIGHT FEET TALL, SIXTEEN INCHES WIDE, 8' X 16"

[KAESER KCF 50 INDUSTRIAL OIL-WATER SEPARATOR 4.9GAL CAPACITY 20"H X 8"D] MANUFACTURER: KAESER MODEL: KCF 50 INDUSTRIAL WATER-OIL SEPARATOR CONTAINER CAPACITY: 4.9 GALLONS FILLING VOLUME: 3.1 GALLONS 20.78"H X 7.87"D CONDENSATE FEED: 2 X 1/2" WATER OUTLET: 1/2" EMPTY WEIGHT: 12.7 LBS TEMPERATURE RANGE: 41-140F MAX OPERATING PRESSURE AT INLET: 232 PSIG PREFILTER: 1.2 GALLONS MAIN FILTER: 1.29 GALLONS TOTAL DIMENSIONS: 20.78" X 11.40" X 10"

HABASIT KVP 72008M X 1-1/2" SQUARE BORE SPROCKET (2) - MANUFACTURER: HABASIT MODEL: KVP 72008M CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THE SPROCKETS ARE IN USED CONDITION WITH MINOR SCUFFS AND SCRATCHES FROM NORMAL USE. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (2) HABASIT KVP 72008M X 1-1/2" SQUARE BORE SPROCKET FOR IS620 & SP620 SPECIFICATIONS: MANUFACTURER: HABASIT MODEL: KVP 72008M DESCRIPTION: SQUARE BORE SPROCKET FOR USE WITH IS620 & SP620 BELTS L: 5.5" W: 5.5" H: 1.5" SQUARE BORE: 1.5"

[DEPRAG MINIMAT 346-327U] CHUCK PNEUMATIC SCREWDRIVERS - PARTS (2) - MANUFACTURER: DEPRAG MODEL: 346-327U CONDITION: FOR PARTS OR NOT WORKING. COMES IN NON-ORIGINAL PACKAGING. THE SCREWDRIVERS ARE IN USED CONDITION WITH SCUFFS, SCRATCHES, AND GREASE RESIDUE FROM PREVIOUS USE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THE TOOLS WERE REMOVED FROM DECOMMISSIONED ENVIRONMENTS. THE UNITS ARE BEING SOLD AS/IS FOR PARTS AND REPAIR DUE TO BEING UNABLE TO VERIFY CALIBRATION, AND THEREFORE TEST. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (2) AS/IS DEPRAG MINIMAT 346-327U 0.28" CHUCK DIAMETER PNEUMATIC SCREWDRIVERS SPECIFICATIONS: MANUFACTURER: DEPRAG MODEL: 346-327U PNEUMATIC SCREWDRIVERS SERIES: MINIMAT CHUCK DIAMETER: 0.28" SCREWS: UP TO M4 IDLE SPEED: 1100 RPM AIR CONSUMPTION: 0.3/11 M3/MIN/CFM BODY DIAMETER: 1 5/16" LENGTH: 8 25/32" CONNECTION TYPE: NIPPLE NIPPLE DIAMETER: 1/4" SKU: W30B014 1E-02-02(1) 7LBS - 10IN X 10IN X 6IN

DESIGN & ASSEMBLY CONCEPTS RTV INSPECTION SYSTEM S/N: 001692

CONVEYOR TECHNOLOGIES PCB INVERTER

[DEPRAG] 346-518U STRAIGHT DESIGN 1/4" PNEUMATIC AIR DRIVER - PARTS (3) - MANUFACTURER: DEPRAG MODEL: 346-518U CONDITION: FOR PARTS OR NOT WORKING. COMES IN NON-ORIGINAL PACKAGING. THE SCREWDRIVERS ARE IN USED CONDITION WITH SCUFFS, SCRATCHES, AND RESIDUE FROM PREVIOUS USE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THE TOOLS WERE REMOVED FROM DECOMMISSIONED ENVIRONMENTS. THE UNITS ARE BEING SOLD AS IS FOR PARTS OR REPAIR DUE TO BEING UNABLE TO VERIFY CALIBRATION, AND THEREFORE TEST THE UNITS. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (3) DEPRAG 346-518U 1/4" PNEUMATIC SCREWDRIVERS STRAIGHT DESIGN SPECIFICATIONS: MANUFACTURER: DEPRAG MODEL: 346-518U PNEUMATIC SCREWDRIVER BIT COMPATIBILITY: 1/4" DESIGN: STRAIGHT TORQUE RANGE: 0.2/1.8 TO 2/17.7 NM/IN.LBS SCREWS: M3 AIR CONSUMPTION: 0.23/8 M3/MIN/CFM NOISE LEVEL: 62 DB AIR HOSE DIAMETER: 6MM, 1/4" HOSE DIAMETER FOR SCREW SUCTION: 3MM, 1/8" LENGTH: 7.9" SKU: W30B018 1E-12-02(1) 5LBS - 10IN X 10IN X 6IN

[COOPER INSTRUMENTS & SYSTEMS LFS 270-VC 25] (1) COOPER INSTRUMENTS & SYSTEMS LFS 270-VC 25 S-BEAM LOAD CELL MANUFACTURER: COOPER INSTRUMENTS & SYSTEMS MODEL: LFS 270-VC 25 CAPACITY RANGE: 0-25 LBS SPECIFICATIONS: SKU: R11M010 1B-17-01(2) 2LBS - 8IN X 8IN X 4IN

UNBRANDED AIRLOCK DRY-BULK MATERIAL HANDLER 3PH 2HP CHAIN-DRIVEN FLANGE:19"X12" - HANDLER: MANUFACTURER: UNBRANDED MODEL: UNKNOWN CHAIN-DRIVEN INDUSTRIAL FLANGE: OD: 19" X 12" ID: 14" X 7" MOTOR: MANUFACTURER: WEG W22 3 PHASE 2HP 60 HZ 1750 RPM V: 230/460 A: 5.22/2.61 REDUCERS: MANUFACTURER: WINSMITH MODEL: E35MDTS092X0FT PN: 450GB344 SE ENCORE E35 RATIO: 50 INPUT HP: 2.440 OUTPUT TORQUE: 3753

[V-TEK] [TM-330] TAPE AND REEL MACHINE W/ CONTROLLER NOT WORKING FOR PARTS. MANUFACTURER: V-TEK MODEL: TM-330 CONDITION: FOR PARTS OR NOT WORKING. COMES IN NON-ORIGINAL PACKAGING. THIS LOT IS IN FAIR COSMETIC CONDITION. THERE ARE SCUFFS/SCRATCHES AND DINGS IN THE PAINT ALL OVER. SEVERAL CABLES HAVE THEIR CONDUITS BROKEN AND PULLED OUT OF THEIR STRAIN RELIEFS. ONE CONNECTOR (SEAL ASSEMBLY) IS BROKEN (BUT STILL MATES IF YOU'RE CAREFUL). ONE CONNECTOR (J1) IS CUT OFF. ONE FIBER OPTIC SENSOR IS UN-MOUNTED. THERE ARE A FEW COVER SCREWS MISSING. THE BLACK PLASTIC AROUND THE TEMPERATURE CONTROLLERS IS COMING APART. THE HEATERS HEAT UP AND HOLD WITHIN A FEW DEGREES OF SET TEMPERATURE. THE FIBER SENSORS GIVE READINGS. THE AIR PRESSURE SWITCHES AND GAUGES SEEM TO WORK. THE CONTROL PANEL RESPONDS TO USER INPUTS. THE AIR MECHANISM INSIDE HAS SEVERAL AUDIBLE LEAKS. THE TAKEUP MOTOR TURNS AT THE SPEED SET BY ITS KNOB, AND CAN BE STOPPED WITH MODERATE HAND PRESSURE. NOTHING HAPPENS WHEN THE FOOT PEDAL IS PRESSED. INCLUDED: (1) V-TEK TM-330 T&R MACHINE SPECIFICATIONS: MANUFACTURER: V-TEK INCORPORATED MODEL: TM330 TAPE & REEL MACHINE DOES NOT INCLUDE BASE CABINET/STAND SET UP FOR 44MM WIDTH NOT WORKING, SEE NOTES! 155LBS - 53IN X 40IN X 40IN

(4) STAINLESS STEEL 4" SWIVEL TYPE TWO LOCKING TWO STRAIGHT CASTER WHEELS. MANUFACTURER: UNKNOWN, MODEL: DOES NOT APPLY. THE CASTERS ARE IN USED CONDITION WITH SCUFFS, SCRATCHES, AND SOME RESIDUE FROM PREVIOUS USE. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). THE CASTERS WERE REMOVED FROM DECOMMISSIONED MACHINES. THE WHEELS ROLL, THE WHEEL LOCKS WORK AND THE SWIVEL BASE WORKS AS INTENDED. NO FURTHER TESTING WAS PERFORMED AFTER REMOVAL. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (4) STAINLESS STEEL SWIVEL TYPE TWO LOCKING TWO STRAIGHT CASTER WHEELS. SPECIFICATIONS: MANUFACTURER: UNKNOWN, MODEL: DOES NOT APPLY, DESCRIPTION: STAINLESS STEEL TWO LOCKING TWO STRAIGHT CASTER WHEELS SWIVEL TYPE, WHEEL DIAMETER: 4", WHEEL WIDTH: 1", BASE DIMENSIONS: 3.75" X 2.75", TOTAL HEIGHT: 4.75", BOLT HOLE WIDTH: 3" X 1.75". SKU: W21G017 1B-18-01(12)

[40] TIG STAR TS53N88XL #10XL X-LONG CERAMIC NOZZLE 5/8" LONG CERAMIC TIG WELD CUP NOZZLE #10XL 5/8" 16MM SKU: V02H018 1E-01-04(3) 7LBS - 10IN X 10IN X 6IN

[UNIVERSAL INSTRUMENTS CT-0890 SURFACE MOUNT COMPONENT FEEDERS 8MM (8X2) SIZE USED WITH 4796 SERIES HIGH SPEED PLACEMENT MACHINE LARGE TYPE] WITH [UNIVERSAL INSTRUMENTS CT-0896 SURFACE MOUNT COMPONENT FEEDERS 8MM (8X2) SIZE USED WITH 4796 SERIES HIGH SPEED PLACEMENT MACHINE LARGE TYPE] AND [SILICON VALLEY SHELVING & EQUIPMENT CO. CART CART HAS 66 FEEDER POSITIONS 500LBS - 72IN X 44IN X 57IN]

TIG STAR TS53N88XXL #10XXL XXLONG CERAMIC NOZZLE 5/8" (40) - MANUFACTURER: TIG STAR MODEL: TS53N88XXL CONDITION: NEW OTHER. THESE NOZZLES ARE IN A NEW AND UNUSED COSMETIC CONDITION AND COME INDIVIDUALLY PACKAGED IN THE ORIGINAL TIG STAR BOXES OF 10 THAT DO SHOW SOME SIGNS OF SHELF WEAR AND OCCASIONALLY WRITING ON THE OUTSIDE OF THE BOX. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (40) TIG STAR TS53N88XXL #10XXL XXLONG CERAMIC NOZZLE 5/8" SPECIFICATIONS: MANUFACTURER: TIG STAR MODEL: TS53N88XXL DESCRIPTION: CERAMIC TIG WELD CUP NOZZLE #10XXL EXTRA EXTRA LONG 5/8" 16MM SKU: V02H012 1D-17-03(2) 8LBS - 12IN X 12IN X 8IN

CONVEYOR TECHNOLOGIES CTI FIFO-1.3M MAGAZINE LOADER MISSING CONTROLS - PARTS - MANUFACTURER: CONVEYOR TECHNOLOGIES CTI MODEL: FIFO-1.3M CONDITION: FOR PARTS OR NOT WORKING. THIS MACHINE IS IN FAIR COSMETIC CONDITION WITH LOTS OF MINOR BLEMISHES FROM PRIOR USE. THERE ARE SCUFFS/SCRATCHES/STAINS AND SOME BENT SIDE PANELS. SOME OF THE FASTENERS HAVE SURFACE RUST. THE MOST VISIBLE FLAW IS THE CONTROL ELECTRONICS ENCLOSURE IS MISSING AND ITS CABLES ARE DAMAGED. THIS UNIT WILL NEED ITS ELECTRONICS REPLACED BEFORE BEING PUT BACK INTO SERVICE! THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: WITHOUT ELECTRONICS, WE ARE NOT ABLE TO TEST THIS MACHINE. THIS SALE WILL BE AS/IS. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) CTI FIFO-1.3M LOADER SPECIFICATIONS: MANUFACTURER: CONVEYOR TECHNOLOGIES (CTI) MODEL: FIFO-1.3M MAGAZINE LOADER REMOVABLE MAGAZINE SELECTABLE BUFFER PITCH ADJUSTABLE DWELL TIME FOR COOLING MECHANICAL PUSHER USED TO LOAD PCBS BOARD EDGE CLEARANCE 0.118" INTERLOCKED DOORS SERVO-DRIVEN ELEVATOR Z AXIS HAND CRANK WIDTH ADJUST 2" TO 16" OVERALL LENGTH: 1.3 METERS CONTROL/ELECTRONICS ENCLOSURE MISSING FROM THIS UNIT SKU: W25D007 6-BILR1(1) 950LBS - 62IN X 53IN X 76IN

2006 UNBRANDED STANDALONE CONVEYOR 1M WIDE 1" BELT OPEN CENTER STANDALONE CONVEYOR W/ BECKHOFF CONTROL COMPUTER. THIS UNIT IS IN GOOD COSMETIC CONDITION. IT WAS IN ITS FACTORY-NEW CRATE UNTIL WE UNBOXED FOR INSPECTION. THE ORIGINAL PROTECTIVE FILM IS STILL ON SEVERAL OF THE SIDE PANELS. THE UNIT YOU RECEIVE MAY HAVE EITHER A MATTE (SHOWN) OR GLOSSY BLACK PANEL AROUND THE DISPLAY. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: WE WERE ABLE TO RUN THE CONVEYOR IN BOTH DIRECTIONS, RUN THE WIDTH ADJUSTMENT BOTH DIRECTIONS, OPERATE THE GRIPPERS AND STOPS, AND VERIFY OPERATION OF ALL PRODUCT SENSORS. WE USED 120V POWER FOR TESTING AND FOUND THE UNIT FUNCTIONAL BUT CAN'T GUARANTEE IT WILL WORK ON OTHER THAN 200-230V POWER. WE NOTED THE COMPUTER HAS AN INTERNAL CLOCK SET AT 2006, WHICH MAY MEAN THE BIOS BATTERY HAS DIED. WE DID NOT SEE A PASSWORD PROMPT, BUT IF THERE ARE ANY NECESSARY WE HAVE NO PASSWORDS FOR THIS MACHINE. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) 1M OPEN-CENTER EDGE BELT CONVEYOR SPECIFICATIONS: OPEN-CENTER EDGE-BELTED CONVEYOR 1M TOTAL LENGTH RIGHT-TO-LEFT OR LEFT-TO-RIGHT MANUAL AND MOTORIZED WIDTH ADJUSTMENT, 20 TO 63CM CENTER OPENING BETWEEN BELT EDGES 1" WIDE CLOTH-TOPPED BELTS BELTS ARE GEAR DRIVEN BY STEP MOTOR BECKHOFF AS1060-1000 WIDTH ADJUSTMENT DRIVEN BY STEP MOTOR BECKHOFF AS1050-0110 DUAL LINEAR RAILS (52CM LONG), CPC MR9M BEARINGS AND DUAL SCREWS FOR WIDTH ADJUSTMENT ENGRAVED SCALE SHOWS BELT OPENING WIDTH OPTICAL SWITCHES ON BOTH SIDES OF WIDTH ADJUSTMENT RANGE, LOOKS LIKE COULD BE SET AS NARROW AS 10CM PNEUMATIC PRODUCT STOPS "GRIPPERS/TRAY LOCKS" ON BOTH SIDES, (FESTO DFM-20-20-P-A-GF) TRAY LOCKS HAVE 5MM TO 25MM UNDER-STOP CLEARANCE, ONLY BLOCK A FEW MM ON OUTSIDE OF BELTS TRAY LOCKS HAVE AUTOSWITCHES FOR UP AND DOWN STOP PIN WITH 10MM STROKE INTERRUPTS PRODUCT FLOW (FESTO ADVC-10-10-A-P-A) (3) OPTICAL PRODUCT SENSORS, SICK WTB2S-SERIES ENTIRE CONVEYOR ASSEMBLY HAS A FLAT BOTTOM PLATE, SIMPLE TO INTEGRATE IN YOUR SETTING APPROXIMATELY 15.5CM FROM BOTTOM OF PLATE TO TOP OF CONVEYOR BELTS CONTROLLED BY BECKHOFF CX9020-0115/U900 INDUSTRIAL PC WITH WINDOWS 7 USER-FRIENDLY USER INTERFACE HMI IS A COLOR TOUCH SCREEN BECKHOFF CP2907 FESTO PNEUMATICS SMEMA CONVEYOR CONNECTIONS LARGE OPENING UNDER CONVEYOR BASE CABINET CONTAINS ELECTRONICS, OTHERWISE EMPTY POWER REQUIREMENT: 200-230V 1PHASE 50/60HZ 1.2KW WHEELS FOR EASY RELOCATION, ADJUSTABLE LEGS SKU: X28D005 5F-12-03(1),5G-14-03(1) 400LBS - 46IN X 48IN X 50IN

[PALL] [IOL72GN16H] STAINLESS STEEL FILTER HOUSING 26.25"H X 4.81"D 260PSIG AT 100F. MANUFACTURER: PALL MODEL: IOL72GN16H STAINLESS STEEL FILTER HOUSING DIMENSIONS: 26.25"H X 4.81"D VOLUME: 0.82 GALLONS FLOW RATE: 20/76 GPM/LPM CONSTRUCTION: 316L STAINLESS STEEL DESIGN RATING: 260PSIG AT 100F

MARKAL 86733 THERMOMELT HEAT STICK TEMP 400-F 204-C (12) MANUFACTURER: MARKAL MODEL: 86733 CONDITION: NEW OTHER. THESE HEAT STICKS ARE IN A NEW AND UNUSED COSMETIC CONDITION AND COME IN THE ORIGINAL MARKAL BOX THAT CONTAINS 12 STICKS. THE BOX SHOWS SOME MINOR WEAR FROM STORAGE. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (12) MARKAL 86733 THERMOMELT HEAT STICK TEMP 400-F 204-C SPECIFICATIONS: MANUFACTURER: MARKAL MODEL: 86733 DESCRIPTION: THERMOMELT HEAT STICK TEMP 400-F 204-C THE BIG STICK! SKU: U50H021 1C-02-01(4) 2LBS - 8IN X 8IN X 4IN

[VALUE TIG] V13N12 CERAMIC TIG WELD GAS CUP NOZZLE #8 1/2" (36) - MANUFACTURER: VALUE TIG MODEL: V13N12 CONDITION: NEW OTHER. THESE NOZZLES ARE IN A NEW AND UNUSED COSMETIC CONDITION AND COME IN THE ORIGINAL VALUE TIG BOXES OF 10 THAT DO SHOW SOME SIGNS OF SHELF WEAR, AND OCCASIONALLY THERE IS WRITING ON THE OUTSIDE OF THE BOX. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (36) VALUE TIG V13N12 #8 CERAMIC CUP NOZZLE 1/2" SPECIFICATIONS: MANUFACTURER: VALUE TIG MODEL: V13N12 DESCRIPTION: CERAMIC TIG WELD GAS CUP NOZZLE #8 1/2" SKU: V03H021 2O-02-01(1) 2LBS - 6IN X 6IN X 4IN

[REXROTH BS CONVEYOR] REXROTH BS2/C-100 2.7METERS PLASTIC LINK BELT CONVEYOR WITH 440V MOTOR BS - MANUFACTURER: REXROTH MODEL: BS 2/C-100 CONDITION: USED. THIS CONVEYOR IS USED, WITH LOTS OF BLEMISHES FROM USE. THE COVERS ON THE DRIVE MECHANISMS ON BOTH SIDES ARE CROOKED AND FIT BADLY. THERE ARE DEEP GOUGES ON EACH OF THE LINKS. THERE ARE SCUFFS AND SCRATCHES WITH DIRTY RESIDUE FROM WHERE ACCESSORIES FORMERLY WERE MOUNTED. THERE ARE ALSO MINOR SCUFFS/SCRATCHES FROM PRIOR USE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS WAS TAKEN FROM A DECOMMISSIONED MACHINE AND GIVEN A QUICK CHECK TO SEE THAT THE MOTOR RUNS AND THE CONVEYOR WORKS WITHOUT ANY UNDUE NOISES (IT WORKED). NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) REXROTH BS CONVEYOR SPECIFICATIONS: MANUFACTURER: REXROTH BELT SECTIONS MODEL 3842999917 TYPE: BS 2/C-100 PLASTIC LINK CONVEYOR BELT TOTAL LENGTH: 269CM CONVEYOR LENGTH: 260CM LINK WIDTH: 3.2CM MOTOR BODINE/REXROTH MODEL 8981001826 TYPE: 42YBFPP POWER INPUT: 60HZ 440-480V 0.79A 210W 50HZ 220-240/380-415V 1.6/0.86A 180W GEARBOX: REXROTH 3842503579 WIDTH BETWEEN BELT MODULES: 24CM T-SLOT CONSTRUCTION FOR EASY MOUNTING SKU: S31D029

[40] WELDTEC 798F73A CERAMIC TIG WELD CUP NOZZLE #8L LONG 3/8". SKU: V02H024. 3LBS - 8IN X 8IN X 4IN

FACTRAC SMARTCOUNT EDGE-7 PLUS COUNTER TOUCH-SCREEN 12V ELECTRONIC COUNTER DISPLAY CONTROLLER INPUT POWER: 12VDC, 3A SENSOR INPUT: NPN, 3-WIRE, MI2 MAX INPUT RATE: 2000 PULSES PER MINUTE DIMENSIONS: 7.75" X 3.75" X 2.50" THREE OPEN DATA FIELDS, 7 PRELOADED TEMPLATES NO PROGRAMMING REQUIRED CONNECTIONS: (4) USB PORTS, (2) SENSOR INPUT PORTS, (1) ETHERNET PORT, ON/OFF SWITCH. INCLUDES: (1) FACTRAC EDGE-7 PLUS ELECTRONIC COUNTER DISPLAY CONTROLLER 12VDC 3A 2000PPM, (2) PUSHBUTTON OPERATOR SWITCH, (1) POWER ADAPTER. THE DEVICE IS IN USED CONDITION WITH SOME MINOR SCUFFS AND SCRATCHES FROM PREVIOUS USE. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S).

[NEW] FLEETGUARD AF25708 GEN4 AIR FILTER PRIMARY ELEMENT 11.02"H X 8.10"D CUMMINS S/N: MANUFACTURER: FLEETGUARD MODEL: AF25708 CONDITION: NEW OTHER. COMES IN ORIGINAL PACKAGING. THE FILTER IS UNUSED. THE UNIT WAS REMOVED FROM THE BOX FOR PHOTO AND INSPECTION PURPOSES. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) NEW FLEETGUARD AF25708 GEN4 AIR FILTER PRIMARY ELEMENT 11.02"HX8.10"D CUMMINS SPECIFICATIONS: MANUFACTURER: FLEETGUARD MODEL: AF25708 GENERATION 4 AIR FILTER PRIMARY ELEMENT OVERALL HEIGHT: 20.54" OVERALL OUTER DIAMETER: 11.02" INNER DIAMETER: 8.10" COMPATIBLE WITH CUMMINS C450 EQUIVALENTS: FLEETGUARD AF2570800, INLINE FFGAF25708, FFG-AF25708 SKU: W22B016 2O-04-03(1) 12LBS - 28IN X 15IN X 15IN

WELDTEC 796F76A #5XL EXTRA-LONG CERAMIC NOZZLE 5/16" (50) - THESE NOZZLES ARE IN A NEW AND UNUSED COSMETIC CONDITION AND COME INDIVIDUALLY PACKAGED IN THE ORIGINAL WELDTEC BOXES OF 10 THAT DO SHOW SOME SIGNS OF SHELF WEAR AND OCCASIONALLY WRITING ON THE OUTSIDE OF THE BOX. THE BOXES HAVE BEEN TRANSPORTED IN A WAY THAT THE CUPS ARE NOT ALL CONTAINED WITHIN THE INTERNAL SEPARATORS, BUT THE NOZZLES ARE IN GOOD CONDITION. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (50) WELDTEC 796F76A #5XL EXTRA-LONG CERAMIC NOZZLE 5/16" SPECIFICATIONS: MANUFACTURER: WELDTEC MODEL: 796F76A DESCRIPTION: EXTRA-LONG CERAMIC GAS CUP NOZZLE #5XL 5/16" SKU: V02H034 4B-04-04(5) 4LBS - 12IN X 6IN X 6IN

[UNBRANDED] PUNCH PRESS & DIE 4.75" O.D. TOOLING ATTACHMENT RECTANGULAR DIE SHAPE SS. PUNCH PRESS & DIE ATTACHMENT APPLICATION: PRESS BRAKE TOOLING SYSTEMS SCREW THREAD SIZE: 0.265" OUTSIDE DIAMETER: 4.75" DIE DIAMETER: 3.12" CONSTRUCTION MATERIAL: STAINLESS STEEL WEIGHT: 2 KEY SLOTS SIZE RATING: M1.000X3.250+.010 RECTANGULAR DIE: 3.25" X 1".

[FAULTLESS 1400-8] HEAVY-DUTY INDUSTRIAL SWIVEL TYPE CASTER WHEELS WHEEL DIAMETER: 8" WHEEL WIDTH: 2" TOTAL HEIGHT: 9.50" BASE DIMENSIONS: 4.50" X 4" BOLT HOLE WIDTH: 3.50" X 3" (2) - MANUFACTURER: FAULTLESS MODEL: 1400-8 DESCRIPTION: FAULTLESS 1400-8 HEAVY-DUTY INDUSTRIAL SWIVEL TYPE CASTER WHEELS

[30] TIG STAR 13N11 #7 CERAMIC GAS CUP NOZZLE 7/16" CERAMIC TIG WELD GAS CUP NOZZLE #7 7/16" 11MM

[ANORAD SHUTTLE CONVEYOR] ANORAD OPEN-CENTER EXTENDING BELT CONVEYOR 64 CM LONG MOTORIZED WIDTH ADJUSTMENT - MANUFACTURER: ANORAD MODEL: DOES NOT APPLY CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THIS CONVEYOR IS IN FAIR COSMETIC CONDITION WITH MINOR BLEMISHES FROM PRIOR USE INCLUDING DUSTY/OILY RESIDUES, SCUFFS AND SCRATCHES. THE BELTS ARE WORN BUT STILL USABLE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS WAS REMOVED FROM DECOMMISSIONED EQUIPMENT AND NOT TESTED UNDER POWER. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) ANORAD SHUTTLE CONVEYOR SPECIFICATIONS: MANUFACTURER: ANORAD SHUTTLE CONVEYOR EXTENSION TRAVEL: 36 CM OPEN-CENTER EDGE BELT CONVEYOR CONVEYOR LENGTH: 64 CM MOTORIZED WIDTH ADJUSTMENT CONVEYOR WIDTH: 4 TO 45 CM WIDTH ADJUSTMENT STEP MOTOR DRIVES A LEAD SCREW WIDTH ADJUSTMENT LINEAR RAILS: THK RSR15ZM, (S) 55 CM LONG WITH (4) BEARING BLOCKS EXTENTION IS DRIVEN BY PNEUMATIC CYLINDER EXTENSION LINEAR RAILS: THK SR25 (2) 64 CM LONG WITH (4) BEARING BLOCKS EXTENSION AXIS HAS SHOCK ABSORBERS BOTH ENDS LOCATION SENSORS ON ENDS OF ADJUSTMENT TRAVEL ON BOTH AXES (1) PRODUCT DETECTION SENSOR ON THE CONVEYOR LEVELING BOLTS ALL 4 CORNERS ALUMINUM PLATE CONSTRUCTION SKU: V17D008 5G-11-02(1) 165LBS - 48IN X 40IN X 26IN

2015 EVEST MI551-A3 MI500-SERIES AUTOMATED, HIGH-PRECISION DISPENSING AND ASSEMBLY SYSTEM WITH 4-AXIS LINEAR ROBOT. DUAL MACHINE VISION CAMERAS. LOADING, UNLOADING, AND FEED EXTERIOR STATIONS. XY ROBOT HAS IRONLESS LINEAR MOTORS, ABOUT 37 X 33 MM TRAVEL. Z AXIS ROBOT HAS SERVOMOTOR LINEAR ACTUATORS. MUSASHI DIGITAL SYRINGE DISPENSE CONTROLLER. PC CONTROL RUNNING WINDOWS, I5-2400CPU. HEPA AIR FILTER/FAN UNIT ON TOP WITH SUPERB SU5-4040BS FILTER PANEL. POWER: 220V 1PHASE 3KVA. FAIR COSMETIC CONDITION WITH SCUFFS/SCRATCHES AND ADHESIVE LABEL RESIDUES FROM PRIOR USE. HEAVY RUB-MARKS AND SCRATCHES IN THE PAINT, ESPECIALLY ON THE BACK OF THE CABINET. YELLOW GUARD AND EMERGENCY STOP SWITCH ARE LOOSE AND CAN SPIN EASILY IN PLACE. SYSTEM IS WORKING AS FAR AS CAN BE TESTED: PNEUMATICS WORKED FINE, WITH ALL THREE EXTERIOR STATIONS AND THE INTERIOR PNEUMATIC PARTS MOVING WHEN COMMANDED. WHEN POWERED ON THE STAGES WERE MOVING, LOADING AND UNLOADING STATIONS LOCKED AND UNLOCKED, RAISED AND LOWERED THEIR PLATFORMS. ILLUMINATORS WERE ABLE TO LIGHT UP AT VARIOUS INTENSITIES ACCORDING TO THEIR SET POINTS. PICTURES WERE ABLE TO BE TAKEN WITH THE FIXED AND MOVING CAMERAS. STACK LIGHTS AND ALARM ALL WORKED. LARGER MONITOR TOUCHSCREEN WORKS AS EXPECTED. SMALLER MONITOR WOKE UP AND GAVE ITS SPLASH SCREEN AT POWER-ON, BUT DURING OPERATION IT DIDN'T EVER SHOW ANYTHING. XY LINEAR MOTION PARTS INSIDE MOVE EASILY WITH LIGHT HAND PRESSURE WHEN POWER IS OFF. WHEN THE READY BUTTON WAS PRESSED, THE MOTORS HELD THEIR POSITION AND WOULDN'T BUDGE WHEN PUSHED (BECAUSE THE SYSTEM WAS CONTROLLING THEIR POSITION). MOTORS WOULD NOT MOVE UNDER POWER DUE TO A PERSISTENT "AIR SENSOR ABNORMAL" ERROR WHICH CAUSED THE HOMING PROCESS TO FAIL. FRONT PANEL AIR PRESSURE GAUGE ALWAYS SHOWED ZERO AND GAVE A RED LIGHT. MANUAL CONTROLS TO MOVE STAGES RESULTED IN OTHER ERRORS. SOME MINOR REPAIRS MAY BE NECESSARY BEFORE THIS UNIT RETURNS TO SERVICE. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. 1125LBS - 56IN X 62IN X 90IN

[5] ALLEN HALO KROME 57310 3/16" CUSHION GRIP T HANDLE HEX WRENCHES. MANUFACTURER: ALLEN. MODEL: 57310. SERIES: HALO KROME. HEX WRENCH HEX SIZE: 3/16". T GRIP STYLE. COLOR: RED. TOTAL DIMENSIONS: 6 1/4"X4"X3/4". MADE IN THE USA. SKU: S21B023 2B-05-03(24). 2LBS - 10IN X 10IN X 6IN.

[SEEKONK BT-2L] 1/4" PRE-SET SLIP TYPE TORQUE WRENCH 2.5 NM 4-1/8" HANDLE LENGTH. MANUFACTURER: SEEKONK. MODEL: BT-2L. CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THIS ITEM IS IN FAIR COSMETIC CONDITION, WITH MINOR SCUFFS/BRIGHT SPOTS FROM USE, AND SOME ETCHING ON ONE SIDE OF THE HANDLE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS TORQUE WRENCH IS IN GOOD WORKING CONDITION. WE ARE NOT EQUIPPED TO MEASURE TORQUE, BUT IT FEELS LIKE IT RELEASES CONSISTENTLY AT THE SAME TENSION RIGHT, AND LOCKS WHEN TURNED LEFT. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) SEEKONK BT-2L TORQUE WRENCH. SPECIFICATIONS: MANUFACTURER: SEEKONK. PRECISION MODEL: BT-2L. PRE-SET TORQUE WRENCH. SLIP TYPE. LOCKUP OPERATION: PRESET TORQUE LEVEL TURNED RIGHT, LOCKS WHEN TURNED LEFT. TORQUE RATING: 2.5 NM. DRIVE SIZE: 1/4" SQUARE. HANDLE LENGTH: 4-1/8". SOLID STEEL CONSTRUCTION. MADE IN USA.

[AMERICAN LED-GIBLE] LD-5212-101 TOWER STACKLIGHT R/G WITH FLASHING CAPABILITIES. 52MM (2"D) INDOOR RED AND GREEN ANDON LIGHT. VOLTAGE: 120VAC. 2-SECTION STACKLIGHT RED GREEN FLASHING OR STEADY CAPABLE. 15" TOTAL HEIGHT. 3.5"L POLE HAS M16X2.0 THREADS. EASY BA15S LED REPLACEABLE BULBS. ~16" PIGTAIL WIRE. NO MOUNTING BRACKET. STACKLIGHT IS IN GOOD COSMETIC CONDITION WITH SCUFFS AND SCRATCHES FROM REGULAR INDUSTRIAL USE AND COMES IN NON-ORIGINAL PACKAGING. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). REMOVED FROM DECOMMISSIONED EQUIPMENT AND WAS NOT TESTED SEPARATELY AFTER REMOVAL. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. SKU: Y06H012 2H-01-03(15) 4LBS - 20IN X 8IN X 4IN

[DANFOSS VLT-102 VARIABLE SPEED DRIVE INVERTER] INPUT: 3 X 200/220/230V 3 X 5.7/5.2/5.0A 50/60 HZ. OUTPUT: 3 X (0-200/220/230)V MAX: 6.2/5.6/5.4A 1.5KW 1-50/60 (100/120HZ. SKU: T15A004 1D-09-01(1) 24LBS - 18IN X 18IN X 14IN S/N: 17586002

[ROACH CONVEYORS] [PRIMO SORT] PNEU/ELECTRIC BOX PUSHER PRIMO SORT +FRAME EXTD16" HISPD 75/MIN. SORTER: MANUFACTURER: ROACH CONVEYORS MODEL: PRIMO SORT HIGH SPEED: UP TO 75 SORTS PER MINUTE GREEN BASE: 57" X 12" CYLINDER: MANUFACTURER: PARKER 4MA SERIES ENVELOPE PRESSURE: 250 PSI AIR VALVE: MANUFACTURER: MAC MODEL: MV-A2B-A111-PM-591CA PUSHER: DIMENSIONS: 12" X 5" EXTENDS: 16" ELECTRICAL: +- 24VDC SINGLE SOLENOID 2 HALL EFFECT SENSORS AIR REGULATOR & FILTER: MANUFACTURER: SMC MODELS: AL30-N03-Z / AW30-N03-Z FRAME: APPROX. DIMENSIONS: 33" X 58" X 48"H. THIS ITEM COMES IN NON-ORIGINAL PACKAGING. IT HAS SCUFFS AND SCRATCHES FROM NORMAL USE. MANUALLY THE CYLINDER(S) CAN BE PULLED OUT AND PUSHED IN THE WAY THEY ARE NOW WITHOUT ANY EXTERNAL SOURCES CONNECTED TO THEM. WHEN THEY ARE PULLED OUT AN EXTERNAL AIR SOURCE PUSHES THEM BACK IN EASILY WITH NO PROBLEMS. WE DID NOT TEST THE ELECTRICAL SETUP FOR THESE SORTERS. NO FURTHER TESTING WAS PERFORMED.