Industrial Electronic Manufacturing Process Equipment Parts Tools Day 3 of 3 day event

1997 UNBRANDED 844985 WELDED STEEL BLACK 40 GALLON LIQUID REFRIGERANT RECEIVER TANK 400 PSI @ 150 F. 20AOF @ 400 PSI APPROXIMATE VOLUME: 40 GALLONS CYLINDRICAL SECTION OF TANK: 50" LONG 45" CIRCUMFERENCE WELDED STEEL CONSTRUCTION BOLTED 5/8" JIC HYDRAULIC FITTING TOTAL APPROX HEIGHT: 5'.

[TECHNIWELD TIG10N47] CERAMIC TIG TORCH CUP NOZZLE 7/16" #7 (17, 18, 26) SKU: U51H009 1C-01-02(2) 3LBS - 7IN X 7IN X 7IN. THESE NOZZLES ARE IN A NEW AND UNUSED COSMETIC CONDITION AND COME INDIVIDUALLY PACKAGED IN THE ORIGINAL TECHNIWELD BOX THAT DOES SHOW SOME SIGNS OF SHELF WEAR AND OCCASIONALLY WRITING ON THE OUTSIDE OF THE BOX. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (40) TECHNIWELD TIG10N47 #7 CERAMIC TIG TORCH NOZZLE

2022 FORTVILLE FEEDERS HEX SCREW FEED SYSTEM SCREWS PRESENTER 15PPM. THIS SYSTEM WAS PURCHASED BUT NEVER DELIVERED TO THE END USER. IT HAS BEEN TESTED BY THE MANUFACTURER BUT NEVER PLACED INTO PRODUCTION. INCLUDED: (1) FORTVILLE SCREW FEED SYSTEM (4) ADJUSTABLE FEET (1) INSTRUCTION & MAINTENANCE MANUAL, WITH SCHEMATICS (2) BAGS OF SAMPLE SCREWS. SPECIFICATIONS: MANUFACTURER: FORTVILLE FEEDERS HEX SCREW FEED SYSTEM PRESENTS 1 SCREW AT A TIME AT THE OUTPUT VIBRATORY BOWL FEEDER NOMINAL BOWL DIAMETER: 10" VIBRATORY HOPPER INLET VIBRATORY LINEAR CONVEYOR OUTLET FEEDS SCREWS HANGING VERTICALLY, HEAD UP FEED RATE: 15 SCREWS/MINUTE PNEUMATIC CLAMP HOLDS PRESENTED SCREW AT OUTPUT LOW LEVEL SENSORS IN HOPPER AND BOWL SCREW PRESENT SENSOR AT OUTPUT POWER REQUIREMENT: 115VACPLUS 60PSI CONTROLLER: RODIX FC-200/2 SOUND REDUCING ENCLOSURE (TARGET: 80 DB) OVERALL HEIGHT: APPROXIMATELY 47" MANUFACTURED: 2022 SKU: X19D004 5G-12-03(1) 900LBS - 71IN X 40IN X 55IN

[TAYLOR PNEUMATIC] T-7775 SQUARE DRIVE 3/4" IMPACT WRENCH - MANUFACTURER: TAYLOR PNEUMATIC TOOL MODEL: T-7775 CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THE WRENCH IS IN HEAVILY USED CONDITION WITH SCUFFS, SCRATCHES, AND SOME RESIDUE FROM PREVIOUS USE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THE PNEUMATIC TOOL WAS REMOVED FROM A DECOMMISSIONED ENVIRONMENT. THE TOOL WAS CONNECTED TO AN AIR COMPRESSOR AND SPUN AT FULL SPEED IN BOTH DIRECTIONS WHEN THE TRIGGER WAS DEPRESSED. NO FURTHER TESTING WAS PERFORMED AFTER REMOVAL. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) TAYLOR PNEUMATIC TOOLS T-7775 3/4" SQUARE DRIVE PNEUMATIC IMPACT WRENCH 90 PSI SPECIFICATIONS: MANUFACTURER: TAYLOR PNEUMATIC TOOLS MODEL: T-7775 PNEUMATIC IMPACT WRENCH BOLT CAPACITY: 1" SQAURE DRIVE: 3/4" MAX TORQUE: 1500 FT/LBS. LENGTH: 11 7/8" AIR INLET: 1/4" NPT AIR PRESSURE RATING: 90 PSI MAX SPEED: 5000 RPM STEEL CLUTCH HOUSING

[ARTUS] CLEAR PLASTIC SHIMS 5" X 20" X 1MM / 0.040" (38) MANUFACTURER: ARTUS MODEL: DOES NOT APPLY SHIM STOCK SHEET SIZE: 5" X 20" COLOR: CLEAR THICKNESS: 0.040"/1MM MATERIAL: PLASTIC SKU: V10B013 1B-03-03(1) 12LBS - 25IN X 8IN X 8IN

[SENTRY AIR SYSTEMS SS-2000-FH-MIST] HANGING OIL MIST FILTER 1PH 208/230VAC -PARTS - MANUFACTURER: SENTRY AIR SYSTEMS SAS MODEL: SS-2000-FH-MIST CONDITION: FOR PARTS OR NOT WORKING. THIS FILTER UNIT IS IN GOOD COSMETIC CONDITION ON THE OUTSIDE WITH SCUFFS AND SCRATCHES FROM REGULAR INDUSTRIAL USE. THE PRE-FILTER AS WELL AS THE NOOKS AND CRANNIES OF THE INSIDE SHOW VISIBLE OIL COLLECTING ON PARTS AND POOLING ON THE BOTTOM OF THE ENCLOSURE. THERE IS AN INTACT (BUT OILY) 3-1/2" PREFILTER INSTALLED IN THE CLEANER AS WELL AS THE FRAME OF THE FINE FILTER, BUT THE FINE FILTER HAS DISINTEGRATED FROM EITHER GENERAL USE AND/OR FROM THE OIL THAT WAS ENTERING THE CLEANER OVER TIME. WE PLUGGED IN THIS UNIT AND ACTUATED THE FAN SPEED CONTROL TO AN ON POSITION AND THEN WE HEARD A LOUD BUZZING SOUND AND THE MOTOR DID NOT SPIN OR TURN. FOR THIS REASON, WE ARE SELLING THIS UNIT AS/IS AND FOR PARTS. THE MFG TAG IS UNREADABLE ON THIS UNIT BUT WE HAVE A NUMBER OF THE SAME CLEANERS IN OUR INVENTORY IN DIFFERENT CONDITIONS AND WERE ABLE TO MATCH THE MODEL NUMBER BY COMPARISON. COMES IN NON-ORIGINAL PACKAGING. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: WE PLUGGED IN THIS FILTER UNIT AND ACTUATED THE FAN SPEED CONTROL TO AN ON POSITION AND THEN WE HEARD A LOUD BUZZING SOUND AND THE MOTOR DID NOT SPIN OR TURN. FOR THIS REASON, WE ARE SELLING THIS UNIT AS/IS AND FOR PARTS. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) SENTRY AIR SYSTEMS SAS SS-2000-FH-MIST FREE-HANGING OIL MIST FILTER 1PH 208/230VAC SPECIFICATIONS: MANUFACTURER: SENTRY AIR SYSTEMS MODEL: SS-2000-FH-MIST DESCRIPTION: FREE-HANGING OIL MIST FILTER UNIT 208/230VAC 1PH 45" X 24" X 24" FILTER OPENING 24" X 24" EXHAUST: 12-1/2" X 10" 4-WAY ADJUSTABLE GRATE 16 GA. CARBON STEEL CABINET WITH POLYESTER POWDER COATING UP TO 2,000 CFM (HIGH) APPROX. 70 DBA CIRCLE BOLT HANGING HARDWARE HIGH AND LOW FAN SETTINGS (4) EYE BOLT HANGER CONNECTIONS SKU: X44H010 5A-08-03(1) 235LBS - 53IN X 40IN X 34IN

[NEW OTHER] RAMSEY PRODUCTS STCL40-1/2P X 40MMW CONVEYOR CHAINS. COMES IN FACTORY SEALED PACKAGING. PACKAGING MAY BE DAMAGED AND COVERED WITH SOME GREASE. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (2) RAMSEY PRODUCTS STCL40-1/2P X 40MMW CONVEYOR CHAINS. SPECIFICATIONS: MANUFACTURER: RAMSEY PRODUCTS CORPORATION MODEL: STCL40-1/2P X 40MMW PITCH: 1/2" WIDTH: 40MM CHAIN TYPE: CONVEYOR LENGTH: 10 FEET SKU: M46M019 1B-05-02(7) 31LBS - 12IN X 12IN X 9IN

(20) MATE STEEL TOOLING DIES 1.56"D .063X.750+.018 TO .125X.750+.012 SIZES. MANUFACTURER: MATE PRECISION TOOLING. MODEL: DOES NOT APPLY. PRESS BRAKE TOOLING DIES SLUG FREE. MATERIAL: STAINLESS STEEL. DIAMETER: 1.56". SIZES: (1) .063 X .750 + .018 (1) .062 X .625 + .012 (1) .125 X .625 + .012 (1) .137 X .762 (1) .218 X .500 + .012 (1) .171 X .500 + .010 (1) .281 X 1.000 + .024 (1) .281 X .500 + .018 (1) .328 X .828 + .010 (1) ,218 X .750 +.020 (1) .312 X .750 + .018 (1) .265 X .406 + .012 (1) .312 X .500 + .018 (1) .375 X .750 + .010 (1) .375 X .500 + .036 (1) .437 X .625 + .024 (1) .875 X .750 + .012 (1) .313 X .625 + .018 (1) .437 X .625 + .018 (1) .125 X .750 + .012. SKU: T02B006 1D-12-02(1) 6LBS - 8IN X 8IN X 7IN

[RK ROSE+KRIEGER ACMS QST QLT ELECTRIC LIFT-WORK TRANSPORT CART] 360 25"X24" CNTL - MANUFACTURER: RK ROSE+KRIEGER MODEL: ACMS18009201R000. THIS ITEM COMES IN NON-ORIGINAL PACKAGING. IT HAS SCUFFS AND SCRATCHES FROM NORMAL USE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: WHEN POWER WAS APPLIED, THIS ITEM RAN VERY SMOOTHLY. WE WERE ABLE TO RAISE AND LOWER IT EASILY WITH NO PROBLEMS. THE PLATFORM ROTATES 360 DEGREES AND CAN BE BOLTED DOWN AT TWO OF THE CORNERS TO KEEP IN STATIONARY. THE REMOTE CONTROL CAN RAISE AND LOWER IT CONSISTENTLY OR AT EVEN INCREMENTS. THE REMOTE AND CONTROL MODULE CAN PROBABLY DO MORE OPTIONS BUT WE ARE NOT FAMILIAR WITH THIS TYPE OF EQUIPMENT TO FULLY TEST THEM. NO FURTHER TESTING WAS PERFORMED. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) RK ROSE+KRIEGER ACMS QST QLT ELECTRIC LIFT-WORK TRANSPORT CART SPECIFICATIONS: LIFT: MANUFACTURER: RK ROSE+KRIEGER / PHOENIX MECANO 115VAC 60 HZ SINGLE PHASE REMOTE CONTROL: MANUFACTURER: RK ROSE+KRIEGER / PHOENIX MECANO QZB00D04AD041 PLATFORM: ROTATE 360 DIMENSIONS: 25-1/2" X 24" CAN BE BOLTED TO BACK/FRONT CORNERS MAX. HT.: 52" (OFF GROUND) MIN. HT.: 20-1/2" (OFF GROUND) ELECTRIC LINEAR ACTUATOR: MANUFACTURER: RK ROSE+KRIEGER / PHOENIX MECANO ART: ACMS18009201R000 ID NO: QLT18BA030800 MULTI STAGE 24VDC / 120W V: 18MM/S F MAX.: DRUCK 1000N / ZUG 1000N HUB: 800MM ED: S3 20% 10 MIN. MULTICONTROL-KONFIGURATION: MANUFACTURER: RK ROSE+KRIEGER / PHOENIX MECANO MATERIAL: QST61F02AF100 DUO ACCU ULN = 115VAC 50/60 HZ IP30 P = 300VA ANTRIEB: ALPHA COLONNE II FIRMWARE: 0103/0223 SKU: U34L010 5C-08-01(1) 325LBS - 51IN X 40IN X 60IN

[URREA UP893A] 1" DRIVE PNEUMATIC IMPACT WRENCH PISTOL GRIP 1800 FT/LBS - PARTS - MANUFACTURER: URREA MODEL: UP893A CONDITION: FOR PARTS OR NOT WORKING. COMES IN NON-ORIGINAL PACKAGING. THE WRENCH IS IN HEAVILY USED CONDITION WITH SCUFFS, SCRATCHES, AND SOME MINOR DENTS IN THE FINISH. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THE TOOL WAS REMOVED FROM A DECOMMISSIONED ENVIRONMENT. THE PISTOL GRIP TRIGGER IS STUCK IN POSITION, THEREFORE THE UNIT IS BEING SOLD AS/IS FOR PARTS OR REPAIR. NO FURTHER TESTING WAS PERFORMED AFTER REMOVAL. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) AS/IS URREA UP893A 1" DRIVE PNEUMATIC IMPACT WRENCH PISTOL GRIP 1800 FT/LBS SPECIFICATIONS: MANUFACTURER: URREA MODEL: UP893A HEAVY-DUTY INDUSTRIAL IMPACT WRENCH ACTUATION: PNEUMATIC, COMPRESSED AIR DRIVE SIZE: 1" TOTAL LENGTH: 11 3/16" MAX TORQUE: 1800 FT/LBS PRESSURE RATING: 90 PSI AIR INLET: 1/2" NPT CFM: 9 SPEED: 4000 RPM REVERSIBLE SKU: X28B023

[OMRON DRT1-COM] DEVICENET COMMUNICATION UNIT - MANUFACTURER: OMRON MODEL: DRT1-COM UNIT I/O POINTS: 1024 MAX (INCLUDING INPUTS AND OUTPUTS) POWER SUPPLY VOLTAGE: 11 TO 25 VDC AMPERES: 30MA MAX (COMMUNICATIONS), 0.6 A AT 24 VDC (INTERNAL CIRCUIT) SHOCK RESISTANCE: 200 M/S SQUARED AMBIENT OPERATING TEMPERATURE: -10 C TO 55 C VIBRATION RESISTANCE: 10-150 HZ, 1.0-MM DOUBLE AMPLITUDE OR 70 M/S SQUARED AMBIENT OPERATING HUMIDITY: 25%-85% OUTPUT POWER SUPPLY: 0.4 A MAX DIELECTRIC STRENGTH: 500 VAC FOR 1 MINUTE

[PROTO 09938] PROTO 09938 2-3/8-INCH 6-POINT #5 SPLINE DRIVE IMPACT SOCKET BLACK OXIDE 4.60LBS. MANUFACTURER: PROTO MODEL: 09938 DESCRIPTION: #5 SPLINE DRIVE 6-POINT IMPACT SOCKET SIZE: 2-3/8" SOCKET DIAMETER: 3-3/4" DRIVE DIAMETER: 2-3/8" LENGTH: 3-57/64" WEIGHT: 4.60LBS.

SMC HRSH090-A-20 THERMO CHILLER AIR-COOLED POWERS ON ALARM 39 & 18 BAD! - PARTS - MANUFACTURER: SMC MODEL: HRSH090-A-20 CONDITION: FOR PARTS OR NOT WORKING. THIS CHILLER IS IN FAIR COSMETIC CONDITION. IT IS VISIBLY DIRTY OUTSIDE, AND THE WETTED AREAS HAVE A LIGHT-BLUE/GREEN RESIDUE INSIDE. THE FRONT PANEL IS MISSING AND THE SIDES ARE HEAVILY DENTED. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS UNIT IS IN PARTIAL WORKING CONDITION. IT POWERS ON AND THE CONTROLLER RESPONDS TO USER INPUTS. IT SHOWS ALARM NUMBER 39 (INTERNAL FAN STOPPAGE) AND THE PREVIOUS OWNER SAID IT ALSO GAVE ALARM 18 (COMPRESSOR RUNNING FAILURE) BUT WE DIDN'T SEE THAT IN OUR TESTING. THE FAN, PUMP, AND REFRIGERATION ALL FAILED TO START. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) SMC HRSH090 CHILLER SPECIFICATIONS: MANUFACTURER: SMC MODEL: HRSH090-A-20 RECIRCULATING REFRIGERATED CHILLER COOLING CAPACITY: 9.5KW SET RANGE: 5 TO 40 OC TRIPLE INVERTERS (FOR PUMP, COMPRESSOR, AND FAN) FOR EFFICIENCY DIGITAL CONTROLLER LARGE CAPACITY COMPACT 38 CM WITH HIGH EFFICIENCY FOR INDOOR USE POWER: 3PHASE 200-230V 50/60HZ 15A REFRIGERANT: R410A SKU: V14D006 5I-17-01(1) 345LBS - 48IN X 40IN X 51IN

SANKI VIBRATORY HOPPER/300MM BOWL/LINEAR CAP FEEDERS WITH P312 P212 CONTROLLERS MANUFACTURER: SANKI MODEL: PEF-300AL INCLUDED: (1) SANKI 3-STAGE VIBRATORY CAP FEEDER WITH STAND SPECIFICATIONS: MANUFACTURER: SANKI VIBRATORY FEEDER SETUP FOR CAPS TO FIT 2ML VIALS (2) OUTPUT LANES DESIGNED FOR AC 100V/200V 50/60HZ POWER PIEZO FEEDERS DO NOT AFFECT SMALL, MAGNETIC PARTS WITH THEIR DRIVE SECTIONS PIEZO FEEDERS SAVE UP TO 70% OF THE ENERGY OF ELECTROMAGNETIC DRIVES BULK HOPPER FEEDER: BHF-10A ELECTROMAGNETIC VIBRATORY FEEDER HOPPER OPENING: 25 CM SQUARE STANDARD LOAD: 3KG BOWL FEEDER: PEF-300AL PIEZO BOWL FEEDER DIAMETER: 300MM SET UP FOR CAPS TO FIT ON 2ML PLASTIC VIALS LINEAR FEEDER: PEF-L250AG PIEZO IN-LINE FEEDER MAXIMUM CHUTE LENGTH: 70CM MAXIMUM CHUTE WIDTH: 50MM MAXIMUM CHUTE MASS: 5KG PIEZO FEEDERS HAVE ADJUSTABLE DIGITAL CONTROLLERS P312 AND P212 VARIABLE OUTPUT VOLTAGE VARIABLE OUTPUT FREQUENCY INPUT: 100/200V 50/60HZ (NOT 230V) SKU: X19D015

CLARAGE CISS CENTRIFUGAL EXHAUST FAN BLOWER 3500RPM. BLOWER: MANUFACTURER: CLARAGE / TWIN CITY FAN & BLOWER TYPE: CISS HEAVY-DUTY SIZE: 7 SN: 07-0355 WIDTH: SW ARR: MADE IN THE USA MOTOR: MANUFACTURER: TECO WESTINGHOUSE CAT #: N752 TYPE: AEEANE012 MAX-SE 3 PHASE FRAME: 213T 7.5 HP INDUCTION MOTOR POLES: 2 60 HZ INS.: F VOLTS: 230 400 460 AMPS: 18.2 10.5 9.1 3500 RPM DESIGN: B TEFC

TIG STAR T10N48L #6L LONG CERAMIC NOZZLE 3/8" 10MM (40) - MANUFACTURER: TIG STAR MODEL: T10N48L CONDITION: NEW OTHER. THESE NOZZLES ARE IN A NEW AND UNUSED COSMETIC CONDITION AND COME INDIVIDUALLY PACKAGED IN THE ORIGINAL TIG STAR BOXES OF 10 THAT DO SHOW SOME SIGNS OF SHELF WEAR AND OCCASIONALLY WRITING ON THE OUTSIDE OF THE BOX. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (40) TIG STAR T10N48L #6L LONG CERAMIC NOZZLE 3/8" 10MM SPECIFICATIONS: MANUFACTURER: TIG STAR MODEL: T10N48L DESCRIPTION: LONG CERAMIC NOZZLE #6 3/8" 10MM SKU: V02H041 4B-02-04(3) 4LBS - 8IN X 8IN X 4IN

[10'] DAYTON 6AJH6 JIB CRANE BEAM 1/4 TON 24" BROAD WITH [DAYTON] 6AJL0 JIB CRANE HUB BASE - MANUFACTURER: DAYTON MODEL: 6AJH6 CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THE JIB CRANE ASSEMBLY IS IN USED CONDITION WITH SOME SCUFFS, SCRATCHES, AND RUST OXIDATION FROM PREVIOUS USE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THE CRANE WAS REMOVED FROM A DECOMMISSIONED ENVIRONMENT. THE BEAM AND HUB ARE STRUCTURALLY SOUND WITH NO CRACKS. NO FURTHER TESTING WAS PERFORMED AFTER REMOVAL. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) DAYTON 6AJH6 JIB CRANE BEAM 10' (1) DAYTON 6AJL0 JIB CRANE HUB SPECIFICATIONS: MANUFACTURER: DAYTON MODEL: 6AJH6 JIB CRANE ASSEMBLY BEAM BROAD: 24" HEIGHT: 120" FINISH: YELLOW CAPACITY: 1/2 TON CAPACITY MODEL: 6AJL0 JIB CRANE HUB CAPACITY: 1/4 TON LENGTH: 10' WIDTH: 3 15/16" HEIGHT: 6"

[PATLITE LE-FBP, LME-_02FB, LME-_02L] TRI-COLOR SIGNAL TOWERS 24V STACK LIGHTS - MANUFACTURER: PATLITE INDUSTRIAL SIGNAL TOWER TRI-COLOR: RED, ORANGE, GREEN MODEL: LE-FBP VOLTAGE: 24 V AC/DC, 50/60 HZ CURRENT RATING: 0.2 A TYPE 1 RATING DEGREE OF PROTECTION: IP 23 AMBIENT TEMPERATURE RATING: 55C MADE IN INDONESIA MODEL: LME-_02FB VOLTAGE: 24 V AC/DC CLASS 2 RATING CURRENT RATING: 0.3 A DEGREE OF PROTECTION: IP 65 MODEL: LME-_02L VOLTAGE: 24 V AC/DC CLASS 2 RATING CURRENT RATING: 0.3 A DEGREE OF PROTECTION: IP 54 MADE IN INDONESIA

[10-GALLON TANK CAPACITY] DELTA POWER B8 HYDRAULIC POWER UNIT 3.46GPM W/ 2HP MOTOR - MANUFACTURER: DELTA POWER HYDRAULIC MODEL: B8 CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THE POWER UNIT IS IN HEAVILY USED CONDITION WITH SCUFFS, SCRATCHES, AND GREASE RESIDUE FROM PREVIOUS USE. THERE IS SOME CHIPPING OF THE PAINT FINISH AS WELL. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THE POWER UNIT WAS REMOVED FROM A DECOMMISSIONED SETUP AND HAS BEEN IN STORAGE FOR SEVERAL YEARS. THE HYDRAULIC OIL HAS BEEN DRAINED. NO TESTING WAS PERFORMED. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) DELTA POWER HYDRAULIC CO. B8 HYDRAULIC POWER UNIT 10-GALLON TANK CAPACITY (1) DELTA POWER HYDRAULIC CO. 30810008 INDUSTRIAL AC MOTOR (1) ALLEN-BRADLEY 836T-T301J ELECTRO-MECHANICAL CONTROL SWITCH (1) VICKERS DG4V-3-2C-M-W-B-40 DIRECTIONAL CONTROL VALVE SPECIFICATIONS: MANUFACTURER: DELTA POWER HYDRAULIC CO. MODEL: B8 HYDRAULIC POWER UNIT TANK CAPACITY: 10-GALLONS FLOW RATE: 3.46 GPM TANK DIMENSIONS: 21" X 14" X 8.5" MANUFACTURER: DELTA POWER HYDRAULIC CO. MODEL: 30810008 INDUSTRIAL AC MOTOR CONTINUOUS DUTY FRAME DESIGNATION: 2M4-565325 VOLTAGE: 208/220VAC, 440VAC CURRENT RATING: 5.9/5.6A, 2.8A SPEED RANGE: 1425 TO 1725 RPM FREQUENCY: 50/60 HZ HORSEPOWER: 2 HORSEPOWER MANUFACTURER: ALLEN-BRADLEY AB MODEL: 836T-T301J ELECTRO-MECHANICAL CONTROL SWITCH ADJUSTABLE DIFFERENTIAL: 75 PSI PRESSURE OPERATING RANGE: 1000 PSI CONTACT BLOCK: SPDT, 2 CIRCUIT CONTACT BLOCK OPERATOR: PISTON WITHOUT SEAL MANUFACTURER: VICKERS MODEL: DG4V-3-2C-M-W-B-40 DIRECTIONAL CONTROL VALVE MAX PRESSURE: 5000 PSI

(4) K INDUSTRIAL STEEL HEAVY-DUTY SWIVEL TYPE ROLLING CASTER WHEELS WHEEL DIAMETER: 2.75" WHEEL WIDTH: 1.50" TOTAL HEIGHT: 4.25" BASE DIMENSIONS: 3.50" BOLT HOLE WIDTH: 2.75"

NOREN CORROSION RESISTANT COMPACT CABINET COOLER CC250FP-230SC, SS, W. MANUFACTURER: NOREN MODEL: CC250FP-230SC, SS, W DESCRIPTION: CORROSION RESISTANT COMPACT CABINET COOLER DIMENSIONS: 12" X 12" X 4". THIS UNIT IS USED AND WAS REMOVED FROM A WORKING ENVIRONMENT. ITEM HAS NOT BEEN TESTED SINCE REMOVAL. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) NOREN CORROSION RESISTANT COMPACT CABINET COOLER CC250FP-230SC, SS, W SPECIFICATIONS: MANUFACTURER: NOREN MODEL: CC250FP-230SC, SS, W DESCRIPTION: CORROSION RESISTANT COMPACT CABINET COOLER DIMENSIONS: 12" X 12" X 4" SKU: S08M028 2D-01-04(1) 18LBS - 16IN X 16IN X 8IN

[NEW] HILTI 3582026 1-1/8-IN SMOOTH SHANK CARBIDE REBAR CUTTER 3008907 12-INCH L MANUFACTURER: HILTI MODEL: 3582026 ALTERNATE NUMBER: 3008907 DESCRIPTION: SMOOTH SHANK CARBIDE REBAR CUTTER SIZE: 1-18" LENGTH: 12" SHANK: 1/2" STRAIGHT RELIEF HOLE: YES SKU: U50U035 2G-01-02(1) 4LBS - 16IN X 8IN X 4IN

(1) WRIGHT TOOL 6864 2.00-INCH 6-POINT 3/4-INCH DRIVE STANDARD IMPACT SOCKET 2.55LBS MANUFACTURER: WRIGHT TOOL MODEL: 6864 DESCRIPTION: 3/4" DRIVE 6-POINT STANDARD IMPACT SOCKET SIZE: 2.00" SOCKET DIAMETER: 2-31/32" DRIVE DIAMETER: 1-29/32" LENGTH: 2-7/8" WEIGHT: 2.55LBS

(4) FAULTLESS INDUSTRIAL HEAVY-DUTY STEEL ROLLING CASTER WHEELS SWIVEL TYPE WHEEL DIAMETER: 3" WHEEL WIDTH: 1.75" TOTAL HEIGHT: 4.75" BASE DIMENSIONS: 4" X 3.25" BOLT HOLE WIDTH: 3.25" X 2.25"

[DENSEI BCC2600 INTERFACE CONTROLLER W/ BCV5050 100V INPUT POWER SUPPLIES] INTERFACE CONTROLLER LCD DISPLAY DIGITS: 0-9, A-C CONNECTIONS: 25 PIN HOST, RS485 AND RS232C MONITOR CONNECTIONS DIMENSIONS: 6" X 5.125" X 1" MADE IN JAPAN MODEL: BCV5050 POWER SUPPLY UNIT INPUT VOLTAGE: 100VAC CONNECTIONS: MONITOR, INZONE, AC100V, READER, RS1, RS2 DIMENSIONS: 5.125" X 2.125" X 1.25" MADE IN JAPAN

2015 MIKRON G05-120-1M LINEAR ROBOTIC ASSEMBLY CELL WITH 4 CAM PICK & PLACE STATIONS. FORMERLY USED WITH APPROX. 4 X 1 X 1 CM PLASTIC CAPSULES. SET UP FOR 120 MM PALLETS. INDEXING REPEATABILITY: +/-0.01MM. (4) CAM BASED PICK & PLACE GRIPPER LOCATIONS. CAN BE LINKED WITH MULTIPLE OTHER CELLS. PLC COMPUTER: ALLEN-BRADLEY 6181P-2PW7DC. VACUUM SOURCE: NILFISK GMPJ115. LENZE 3 PHASE CONVEYOR DRIVE MOTORS. BALLUFF BIS00AU RFID PROCESSOR. CLEANROOM COMPATIBLE. POWER: 480V 3PHASE 15A PLUS COMPRESSED AIR.

RUBBERMAID 1025 TILT TRUCK 1 1/2 CUBIC YARD

MARKAL 86436 THERMOMELT HEAT STICK TEMP 125-F 52-C (12) - MANUFACTURER: MARKAL MODEL: 86436 DESCRIPTION: THERMOMELT HEAT STICK TEMP 125-F 52-C THE BIG STICK! SKU: U50H015 1B-19-01(8) 2LBS - 8IN X 8IN X 4IN

HEAVY-DUTY STEEL 5" SWIVEL / FIXED INDUSTRIAL ROLLING CASTER WHEELS (4) - MANUFACTURER: UNKNOWN MODEL: DOES NOT APPLY. THE CASTERS ARE IN USED CONDITION WITH SCUFFS, SCRATCHES, AND SOME RESIDUE FROM PREVIOUS USE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. THE CASTERS WERE REMOVED FROM DECOMMISSIONED MACHINES. THE WHEELS ROLL AND THE SWIVEL BASE WORKS AS INTENDED. NO FURTHER TESTING WAS PERFORMED AFTER REMOVAL. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (4) INDUSTRIAL TWO SWIVEL TWO STRAIGHT TYPE ROLLING 5" CASTER WHEELS SPECIFICATIONS: MANUFACTURER: UNKNOWN MODEL: DOES NOT APPLY DESCRIPTION: INDUSTRIAL TWO SWIVEL TWO STRAIGHT TYPE ROLLING 5" CASTER WHEELS SWIVEL TYPE WHEEL DIAMETER: 5" WHEEL WIDTH: 1.50" BASE DIMENSIONS: 3.75" X 2.75" TOTAL HEIGHT: 5.75" BOLT HOLE WIDTH: " X 1.75"

[SCHMIDT SERVOPRESS 420] FORCE:7,870LBS DRIVE:ROLLER-SCREW SPECIFICATIONS: MANUFACTURER: SCHMIDT MODEL: 420 FORCE F: 7,870 MAX. LBS. ( KN) FORCE F AT 100% DUTY CYCLE: 4,500 LBS. (50 KN) RAM STROKE: 400 / 15.74 MM / LBS RESOLUTION (DRIVE CONTROL): < 0.0004" RAM SPEED: 0 - 7.87"/SEC OVERLOAD PROTECTION: MECH. CLUTCH DRIVE: ROLLER SCREW POWER SUPPLY: 400V 3-PH 16A RAM: EXTERNAL RAM DIMENSIONS: 2.16" X 2.16" RAM BORE (WITH BUSHING): 20H7 0 MM TOP WORKING POSITION: 2.36" TOP RAM POSITION: 1.77" FRAME: THROAT DEPTH: 6.29" SKU: V05L010 6-BILR2(1) 1525LBS - 56IN X 50IN X 86IN

TIG STAR / UNBRANDED 53N87XL #12XL CERAMIC CUP NOZZLE 3/4" (28) - MANUFACTURER: TIG STAR MODEL: 53N87XL CONDITION: NEW OTHER. THESE NOZZLES ARE IN A NEW AND UNUSED COSMETIC CONDITION AND COME INDIVIDUALLY PACKAGED IN THE ORIGINAL TIG STAR AND UNBRANDED BOXES OF 10 THAT DO SHOW SOME SIGNS OF SHELF WEAR AND OCCASIONALLY WRITING ON THE OUTSIDE OF THE BOX. THE TIG STAR CUPS ARE MODEL NUMBER TS53N87XL AND THE UNBRANDED CUPS ARE MODEL NUMBER 53N87XL BUT MATCH VISUALLY. TWO OF THE BOXES EACH CONTAIN 10 CUPS WHILE ONE OF THE UNBRANDED BOXES NOW ONLY CONTAINS 8 CUPS. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (28) TIG STAR / UNBRANDED 53N87XL #12XL CERAMIC CUP NOZZLE 3/4" SPECIFICATIONS: MANUFACTURER: TIG STAR / UNBRANDED MODEL: TS53N87XL / 53N87XL DESCRIPTION: CERAMIC TIG WELD CUP NOZZLE #12XL 3/4" SKU: V04H022 1E-08-02(1) 6LBS - 10IN X 10IN X 8IN

[WELDTEC 796F73A] NOZZLE ALUMINA #6L 3/8" X 1-7/8" (10) - MANUFACTURER: WELDTEC MODEL: 796F73A CONDITION: NEW OTHER. THESE TIG NOZZLES ARE IN A NEW AND UNUSED COSMETIC CONDITION AND COME IN THE ORIGINAL WELDTEC BOX OF 10 NOZZLES. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (10) WELDTEC 796F73A NOZZLE ALUMINA #6L 3/8" X 1-7/8" SPECIFICATIONS: MANUFACTURER: WELDTEC MODEL: 796F73A DESCRIPTION: TIG CUP NOZZLE #6L 3/8" X 1-7/8" LARGE DIAMETER ALUMINA SKU: U50H034 2LBS - 6IN X 6IN X 4IN

MARKAL 86769 THERMOMELT HEAT STICK TEMP 450-F 232-C (7) - MANUFACTURER: MARKAL MODEL: 86769 CONDITION: NEW OTHER. THESE HEAT STICKS ARE IN A NEW AND UNUSED COSMETIC CONDITION AND COME IN THE ORIGINAL MARKAL BOX THAT CONTAINS 7 STICKS. THE BOX SHOWS SOME MINOR WEAR FROM STORAGE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (7) MARKAL 86769 THERMOMELT HEAT STICK TEMP 450-F 232-C SPECIFICATIONS: MANUFACTURER: MARKAL MODEL: 86769 DESCRIPTION: THERMOMELT HEAT STICK TEMP 450-F 232-C THE BIG STICK! SKU: U50H022 1C-02-01(1) 2LBS - 8IN X 8IN X 4IN

[NEW] WHEELER-REX PIPE TOOLS 837825 RIDGE 37825 1/2-INCH NPT ALLOY DROP HEAD PIPE DIES - MANUFACTURER: WHEELER-REX MODEL: 837825 CONDITION: NEW OTHER. COMES IN ORIGINAL PACKAGING. THIS DIE SET IS IN NEW COSMETIC CONDITION AND COMES IN THE ORIGINAL WHEELER-REX PLASTIC PACKAGING THAT DOES SHOW SOME WEAR AND DIRT FROM STORAGE. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) WHEELER-REX PIPE TOOLS 837825 37825 1/2-INCH NPT ALLOY DROP HEAD DIES SPECIFICATIONS: MANUFACTURER: WHEELER-REX PIPE TOOLS MODEL: WHEELER # 937825 RIDGE #: 37825 DESCRIPTION: DROP HEAD DIES 1/2-INCH NPT ALLOY FOR WHEELER MODEL 4200 FOR RIDGE TOOL MODELS: 12R, 00-R, 111-R, O-R, 11R, 30A, 31A SKU: T47H025 1A-01-05-04(8) 2LBS - 8IN X 8IN X 4IN

[PROFAX] TIG MASTER 53N87 #12 LONG CERAMIC NOZZLE 3/4" (40) - MANUFACTURER: PROFAX MODEL: 53N87 CONDITION: NEW OTHER. THESE NOZZLES ARE IN A NEW AND UNUSED COSMETIC CONDITION AND COME INDIVIDUALLY PACKAGED IN THE ORIGINAL PROFAX BOXES OF 10 THAT DO SHOW SOME SIGNS OF SHELF WEAR AND OCCASIONALLY WRITING ON THE OUTSIDE OF THE BOX. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (40) PROFAX TIG MASTER 53N87 #12 LONG CERAMIC NOZZLE 3/4" SPECIFICATIONS: MANUFACTURER: WELDTEC MODEL: 53N87 DESCRIPTION: CERAMIC TIG WELD CUP NOZZLE #12 3/4" SKU: V02H027 4B-03-05(4) 5LBS - 8IN X 8IN X 7IN

(4) FOOTMASTER GD-80 INDUSTRIAL LEVELING CASTERS 63MM WHEEL DIAMETER. SPECIFICATIONS: MANUFACTURER: FOOTMASTER MODEL: GD-80 INDUSTRIAL LEVELING CASTER WHEELS WHEEL DIAMETER: 63 MM WHEEL WIDTH: 1.25" TOTAL HEIGHT: 4" BASE LENGTH: 3.5" BASE WIDTH: 3.5" BASE THICKNESS: 1/4" WHEEL MATERIAL: NYLON NO BEARING LOAD CAPACITY: 550KG

[10] TSUBAKI RS100 ANSI ROLLER CHAIN REPLACEMENT LINKS. MANUFACTURER: TSUBAKI MODEL: RS100 ANSI ROLLER CHAIN RPLACEMENT LINKS ANSI NO.: 100 PITCH: 1.250" ROLLER DIAMETER: 0.750" WIDTH BETWEEN ROLLER LINK PLATES: 0.750" NUMBER OF STRANDS: 1 TRANSVERSE PITCH: 1.408" STANDARD TYPE OF PIN: COTTERED MIN. ULTIMATE STRENGTH ANSI STANDARD: 19530 LB. AVERAGE TENSILE STRENGTH: 26460 LB. MAX ALLOWABLE LOAD: 5070 LB. NUMBER OF LINKS PER 10 FT.: 96

2008 CONVEYOR TECHNOLOGIES CTI SHC-19I-RL-2447-0640 SHUTTLE CONVEYOR - PARTS - MANUFACTURER: CONVEYOR TECHNOLOGIES CTI MODEL: SHC-19I-RL-2447-0640 CONDITION: FOR PARTS OR NOT WORKING. THIS SYSTEM IS IN FAIR COSMETIC CONDITION WITH MINOR BLEMISHES FROM PRIOR USE INCLUDING SCUFFS/STAINS/SCRATCHES AND ADHESIVE LABEL RESIDUES. THERE IS LOTS OF DUST INSIDE. THE INSULATION ON THE POWER CORD IS DAMAGED BUT THE WIRES ARE NOT EXPOSED. THE STACK LIGHT IS BROKEN. PLEASE NOTE: THE HMI HAS BEEN REMOVED FROM THE CONTROL PANEL. THIS IS BEING SOLD AS/IS. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS SYSTEM IS IN PARTIAL WORKING CONDITION. THE PLC POWERS ON; NOTHING ELSE HAPPENS. NO OTHER TESTING WAS DONE. THIS IS BEING SOLD AS/IS. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) CTI SHC SHUTTLE CONVEYOR SPECIFICATIONS: MANUFACTURER: CONVEYOR TECHNOLOGIES MODEL: SHC-19I-RL-2447-0640 SHUTTLE CONVEYOR TRANSFERS BOARDS FROM A CONVEYOR LINE TO AN ADJACENT LINE CONVEYOR MOVES SIDE TO SIDE INSIDE THE SHC MINIMUM BOARD SIZE: 2" X 4" MAXIMUM BOARD SIZE: 16" X 20" CONVEYOR LENGTH: 23" CONVEYOR HEIGHT: 37.5" (ADJUSTABLE) (2) E-STOP BUTTONS STACK LIGHT FOR STATUS INDICATIONS MANUAL OR AUTOMATIC MODE OF OPERATION OMRON PROGRAMMABLE LOGIC CONTROLLER YASKAWA SERVOPACK MOTOR DRIVE YASKAWA 400W SERVO MOTOR SMEMA COMPATIBLE CONNECTIONS FOR PREV/NEXT MACHINES POWER: 120V 60HZ 12.8A MANUFACTURED: 2008 SKU: W22D002 5H-04-01(1) 500LBS - 75IN X 40IN X 77IN

[CHICAGO PNEUMATIC] [CP797] HEAVY DUTY PNEUMATIC IMPACT WRENCH 1.265" DRIVE 4200RPM. MANUFACTURER: CHICAGO PNEUMATIC. MODEL: CP797 HEAVY-DUTY IMPACT WRENCH. ACTUATION: PNEUMATIC. DRIVE: 1.265" STAR/HEX TYPE. BLOWS PER MINUTE: 1080. FREE SPEED: 4200 RPM. AIR INLET THREAD SIZE: 1/2". CLUTCH TYPE: DOUBLE ROCKING DOG-OIL BATH. MAX TORQUE: 1898 NM, 1400 FT/LBS.

[INDEECO 874Z-228500U] 7.5KW INDUSTRIAL BASIN HEATER CONTROL PANEL 480VAC 3PH. MANUFACTURER: INDEECO MODEL: 874Z-228500U. ENCLOSURE DIMENSIONS: 19"L X 17"W X 10"D MATERIAL: FIBERGLASS COMPOSITE CURRENT RATING: 9.02 AMPS. INCLUDES: (1) ZETTLER CONTROLS XMC0-403-EBBDH00F210 DEFINITE PURPOSE CONTACTOR (COIL: 24VAC POLES: 3 CURRENT RATING: 40 A). (1) HAWKEYE 608 CURRENT SWITCH (MEASUREMENT RANGE: 0.5-175A OUTPUT 1A @ 30V AC/DC). (1) ABB SACE TMAX XT1N 125 THERMOMAGNETIC CIRCUIT BREAKER (POLES: 3 CURRENT RATING: 30 A VOLTAGE: 600Y/347V). (1) ABB OT40F3 INDUSTRIAL CONTROL SWITCH (VOLTAGE: 600 V CURRENT: 40 A). (1) ABB OH-L OPERATOR SWITCH HANDLE (TYPE 1, 3R, 4, 4X , 12). (1) BASLER ELECTRIC BE33736001 G06A 1351 INDUSTRIAL TRANSFORMER (PRIMARY VOLTAGE: 480V SECONDARY: 24 VCT 200VA FREQUENCY: 60HZ).

1995 OZAT 9526M41L 1-5/8-INCH 41MM 6-POINT #5 SPLINE DRIVE DEEP IMPACT SOCKET 6.0LBS MANUFACTURER: OZAT MODEL: 9526M41L DESCRIPTION: 6-POINT #5 SPLINE DRIVE DEEP IMPACT SOCKET SIZE: 1-5/8" 41MM LENGTH: 160MM 6.3" SOCKET DIAMETER: 67MM 2.63" DRIVE DIAMETER: 60MM 2.36" WEIGHT: 6.0LB

LAMBDA LND-X-152 DC REGULATED DUAL POWER SUPPLY +/- 15VDC OUT @ 2.5A

[APC ACRD501] INROW RD AIRFLOW COOLING SYSTEM - MANUFACTURER: AMERICAN POWER CONVERSION APC MODEL: ACRD501 CONDITION: USED. THIS COOLER IS IN GOOD OVERALL COSMETIC CONDITION WITH A FEW STANDOUT BLEMISHES. THERE ARE SOME WHITE HANDPRINT SMUDGES THAT DON'T WANT TO CLEAN OFF. THERE ARE SOME SCUFFS/SCRATCHES/DINGS FROM PRIOR USE. SOME REFRIGERANT SPRAYED OUT DURING EVACUATION AND THERE IS RESIDUE NEAR THE FITTINGS. THE COOLING COIL HAS ONLY VERY LITTLE (NORMAL) RESIDUE IN THE DRAIN PAN. CONDENSATE DRAIN AND REFRIGERANT LINES ON TOP WERE CUT AT THE CUSTOMER'S COPPER, SO YOU HAVE THE OPTION OF SWEATING ON NEW LINES OR USING THE CONNECTORS ON TOP OF THE CABINET INSTEAD. NOTE THAT TWO OF THE SIDE DOORS ARE LOCKED AND WE HAVE NO KEY(S) FOR THESE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS WAS REMOVED FROM ACTIVE SERVICE AND NOT TESTED SEPARATELY. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) APC ACRD501 AIR COOLER SPECIFICATIONS: MANUFACTURER: AMERICAN POWER CONVERSION MODEL: ACRD501 INROW RD ROW-BASED PRECISION COOLING SOLUTION AIR-COOLED (REQUIRES REMOTE CONDENSER NOT INCLUDED) TOTAL NET CAPACITY: 29KW MONITORS AND ACTIVELY ADJUSTS COOLING CAPACITY FOR PROPER SERVER INLET TEMPERATURES VARIABLE-SPEED FANS CONDENSATE PUMP MICROPROCESSOR CONTROLLED POWER: 460-480V 3PHASE 60HZ 27A REFRIGERANT: R407C 42U HIGH, 23.5" WIDE ROLLING RACK PROCESSOR CONTROLLER PANEL NOT INCLUDED REQUIRES REFRIGERANT CHARGE AND EXTERNAL CONDENSER UNIT!

[KURODA KDH 2510] ROLLED BALL SCREW W/ DODGE FSB015 ELECTRIC BRAKE 24 VDC - MANUFACTURER: KURODA MODEL: KDH 2510 CONDITION: USED. COMES IN NON ORIGINAL PACKAGING. ITEM IS IN USED CONDITION WITH SCUFFS, SCRATCHES, AND SOME RESIDUE FROM PREVIOUS USE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: ITEM WAS REMOVED FROM A DECOMMISSIONED MACHINE. BALL SCREW MOVES ALONG SHAFT WITH NO IMPEDIMENT. NO FURTHER TESTING WAS PERFORMED AFTER REMOVAL. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) KURODA KDH 2510 12" ROLLED BALL SCREW (1) DODGE FSB015 24 VDC ELECTRIC BRAKE SPECIFICATIONS: MANUFACTURER: KURODA MODEL: KDH 2510 ROLLED BALL SCREW SHAFT LENGTH: 12" SHAFT DIAMETER: 25 MM BALL SCREW LEAD: 10MM BALL SCREW PITCH: 10 MM NUT TYPE: SINGLE NUT MANUFACTURER: DODGE MODEL: FSB015 ELECTRIC BRAKE VOLTAGE: 24 VDC

[22] SOUTHWELD / HIGH TECH 53N88XXL #10XXL CERAMIC NOZZLE 5/8" - MANUFACTURER: SOUTHWELD MODEL: 53N88XXL. THESE NOZZLES ARE IN A NEW AND UNUSED COSMETIC CONDITION AND COME INDIVIDUALLY PACKAGED IN THE ORIGINAL TIG STAR OR HIGH TECH SUPPLIES BOXES THAT DO SHOW SOME SIGNS OF SHELF WEAR AND OCCASIONALLY WRITING ON THE OUTSIDE OF THE BOX. SOME OF THE SOUTHWELD CUPS ARE PINK AND SOME OF THEM ARE A DARKER MAROON. THESE BOXES ALL ORIGINALLY CONTAINED 10 CUPS BUT TWO OF THE BOXES ARE MISSING CUPS. THE TOTAL COUNT OF CUPS IS 22. SPECIFICATIONS: MANUFACTURER: TIG STAR / HIGH TECH SUPPLIES MODEL: TS53N88XXL DESCRIPTION: CERAMIC TIG WELD CUP NOZZLE #10XXL EXTRA EXTRA LONG 5/8" 16MM SKU: V04H020 1E-08-02(1) 6LBS - 10IN X 10IN X 7IN

CONVEYOR TECHNOLOGIES 1 METER ENCLOSED PCB SHUTTLE CONVEYOR

2003 SWEP B8HX20/1P-SN-S PLATE HEAT EXCHANGER LIQUID/LIQUID 350C 10 BAR. THIS HEAT EXCHANGER IS IN FAIR COSMETIC CONDITION WITH MINOR BLEMISHES FROM PRIOR USE. IT WAS USED AS A COOLER FOR AN ABLATION LASER AND THE PRIOR OWNER WRAPPED IT IN ADHESIVE INSULATION. THE INSULATION IS TORN AND DENTED IN PLACES, AND WE REMOVED IT FROM THE LABEL ENTIRELY. THE PIPES LOOK CLEAN INSIDE. THIS WAS REMOVED FROM A WORKING SYSTEM AND NOT TESTED SEPARATELY. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) SWEP B8HX20/1P-SN-S HEAT EXCHANGER SPECIFICATIONS: MANUFACTURER: SWEP (DOVER) PLATE HEAT EXCHANGER TYPE: B8HX20/1P-SN-S 12" X 2.9" X 2.2" ITEM NO.: 063241.0 CUSTOMER ITEM NO.: 10011-020-A MAXIMUM WORKING TEMPERATURE: 350OC MAXIMUM WORKING PRESSURE: 10 BAR VOLUME: 0.378L PRIMARY, 0.42L SECONDARY MINIMUM WORKING TEMPERATURE: -160O TEST PRESSURE: 22 BAR GROUP 1 MANUFACTURED: 2003 CE MARKED SKU: X07D004 1D-17-02(1) 7LBS - 16IN X 8IN X 8IN

2021 UNBRANDED 105CM OPEN-CENTER BELT CONVEYOR WITH SERVOTRONIX MOTOR, ADJUSTABLE. OPEN-CENTER EDGE-BELTED CONVEYOR 105 CM TOTAL LENGTH, MANUAL WIDTH ADJUSTMENT, 9 TO 48CM CENTER OPENING BETWEEN BELT OUTSIDE EDGES, 1" WIDE BELTS. WIDTH ADJUSTMENT HAS (2) DRIVE SCREWS AND (2) LM-16UU BALL BEARING LINEAR SHAFTS TO MAINTAIN PARALLEL. (3) OPTICAL PRODUCT SENSORS, SICK WTB2S-SERIES. BELTS ARE GEAR DRIVEN BY STEP-SERVO MOTOR MOON'S AM34SS3DGA-N-M30 NEMA SIZE 34 FOR SS-EC DRIVER. MOTOR DRIVE: MOON'S SS10-EC-D STEPSERVO SERIES, INPUT: 24-70VDC ETHERCAT. ASSEMBLY HAS A FLAT BOTTOM PLATE, SIMPLE TO INTEGRATE IN YOUR SETTING. APPROXIMATELY 29" WIDE. APPROXIMATELY 14.5CM FROM PLATE TO TOP OF CONVEYOR BELTS. BECKHOFF D-33415 ETHERCAT JUNCTION GIVES CENTRAL LOCATION TO HOOK UP SENSORS.

[GREENHECK CUBE-161-10-G CENTRIFUGAL UPBLAST ROOF EXHAUST FAN 115V 1PH] MANUFACTURER: GREENHECK MODEL: CUBE-161-10-G CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THE FAN IS IN USED CONDITION WITH SOME MINOR DENTS AS WELL AS SOME SCUFFS AND SCRATCHES FROM THE PREVIOUS INSTALLATION. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THE FAN WAS POWERED ON USING A STANDARD 115VAC POWER CORD CONNECTED TO THE ON/OFF SWITCH SUPPLIED WITH THE CABINET. THE IMPELLER SPUN WITH NO OBSTRUCTION AND THE FAN PERFORMED AS INTENDED. NO FURTHER TESTING WAS PERFORMED AFTER REMOVAL. NOTE: THE BELT IS INTACT AND OPERATES, BUT HAS SOME NORMAL WEAR FROM OPERATION AND MAY NEED REPLACEMENT AT SOME POINT IN THE NEAR FUTURE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) GREENHECK CUBE-161-10-G CENTRIFUGAL UPBLAST EXHAUST FAN 115/208-230VAC SPECIFICATIONS: MANUFACTURER: GREENHECK MODEL: CUBE-161-10-G MARK: KEF CENTRIFUGAL UPBLAST EXHAUST FAN DESIGN: BELT DRIVE HORSEPOWER: 1 VOLTAGE: 115/208-230VAC PHASE: SINGLE PHASE BASE DIEMENSIONS: 22" X 22" RECOMMENDED ROOF OPENING: 18.5" X 18.5" CFM RANGE: 2615-4111 ROOF OR WALL MOUNTABLE OVERALL DIAMETER: 28 7/8" BEARING SIZE: 3/4" IMPELLER DIAMETER: 17" HEIGHT FROM TOP OF BASE: 29.75" FAN SPEED RANGE: 1150-1430RPM

[GREY PNEUMATIC 5052D 1-5/8-INCH #5 SPLINE DRIVE IMPACT SOCKET S/N: ] [GREY PNEUMATIC 5046D 1-7/16-INCH #5 SPLINE DRIVE IMPACT SOCKET S/N: ] GP (2) 5052D 1-5/8-INCH (1) 5046D 1-7/16-INCH #5 SPLINE DRIVE IMPACT SOCKETS - MANUFACTURER: GREY PNEUMATIC GP MODEL: DOES NOT APPLY CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THESE SOCKETS HAVE SOME DINGS, SCUFFS, AND SCRATCHES, ALONG WITH SOME SPOTS OF RUST AND OTHER MARKINGS EVIDENT FROM NORMAL USE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THESE SOCKETS WERE REMOVED FROM AN ACTIVE WORKING ENVIRONMENT AND WERE NOT TESTED SUBSEQUENT TO THEIR REMOVAL. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (2) GREY PNEUMATIC 5052D 1-5/8" #5 SPLINE DRIVE IMPACT SOCKET (1) GREY PNEUMATIC 5046D 1-7/16" #5 SPLINE DRIVE IMPACT SOCKET SPECIFICATIONS: MANUFACTURER: GREY PNEUMATIC GP DESCRIPTION: 6-POINT #5 SPLINE DRIVE IMPACT SOCKET MODEL: 5046D SIZE: 1-7/16" SOCKET DIAMETER: 2.36" DRIVE DIAMETER: 2.36" LENGTH: 4.25" WEIGHT: 3.15LBS MODEL: 5052D SIZE: 1-5/8" SOCKET DIAMETER: 2.48" DRIVE DIAMETER: 2.28" LENGTH: 4.33" WEIGHT: 3.10LBS SKU: U47U022