Industrial Electronic Manufacturing Process Equipment Parts Tools Day 3 of 3 day event

[STURTEVANT RICHMONT CAL-36/4] ROTO-TORQ TORQ DRIVER HAND TOOL LOW RANGE: 2"/LB HIGH RANGE: 36"/LB GRADUATION: 2"/LB LENGTH 7.8" 1/4" F HEX

NORDSON MATRIX X2.5 AUTOMATIC INLINE X-RAY INSPECTION MACHINE HIGH SPEED AXI 2.5D

[LEGACY FROM WELDCRAFT 10N25LGC COLLET 1/8" (70)] - MANUFACTURER: LEGACY MODEL: 10N25LGC CONDITION: NEW. COMES IN ORIGINAL PACKAGING. NOTES: NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (70) LEGACY FROM WELDCRAFT 10N25LGC WELDING COLLET 1/8" (3.2MM) (14 PACKAGES OF 5) SPECIFICATIONS: MANUFACTURER: LEGACY/WELDCRAFT MODEL: 10N25LGC WELDING COLLET SIZE: 1/8" (3.2MM) SKU: R36E016

[KYOCERA] KYOCERA 8800063 ABS15 KW10 PARALLELOGRAM CARBIDE TURNING INSERT (13) MANUFACTURER: KYOCERA MODEL: 8800063 CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THESE CARBIDE INSERTS WERE VERY SLIGHTLY USED AND CAREFULLY INSPECTED FOR FLAWS. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: THESE CARBIDE INSERTS WERE VERY SLIGHTLY USED AND CAREFULLY INSPECTED FOR FLAWS. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (13) KYOCERA 8800063 ABS15 KW10 PARALLELOGRAM CARBIDE TURNING INSERT SPECIFICATIONS: MANUFACTURER: KYOCERA MODEL: 8800063 CATALOG NO: ABS15R4005 KW10 ISO NO: ABS15R4005 DESCRIPTION: ABS15 KW10 PARALLELOGRAM CARBIDE TURNING INSERT LENGTH: 0.6063" (15.40MM) THICKNESS: 0.1563" (3.97MM) CORNER RADIUS: 0.0020" (0.0508MM) MATERIAL GRADE: K10 MANUFACTURER'S GRADE: KW10 MAX DEPTH OF CUT: 0.1654" (4.20MM) RAKE: POSITIVE SKU: T05U013 2D-01-02(2) 2LBS - 6IN X 6IN X 4IN

[SPARKS BELTING] MHD1.9-11.66-40-VOF-PS-8 MANUFACTURER: SPARKS BELTING MODEL: MHD1.9-11.66-40-VOF-PS-8 MOTORIZED CONVEYOR PULLEY SERIES: MICROROLLER VOLTAGE: 24 VDC CONNECTION: 9-PIN ROLLER LENGTH: 11.75" TOTAL LENGTH: 13.5" HEX DIAMETER: 0.43" THREAD DIAMETER: 0.44" ROLLER PAD SECTION DIAMETER: 2.09" ROLLER (NO PAD) DIAMETER: 1.91"

CHICAGO PNEUMATIC CP6120-D35L #5 SPLINE PNEUMATIC IMPACT WRENCH 3500RPM - FOR PARTS OR NOT WORKING. MANUFACTURER: CHICAGO PNEUMATIC MODEL: CP6120-D35L. THE WRENCH IS IN HEAVILY USED CONDITION WITH LOTS OF SCUFFS AND SCRATCHES FROM PREVIOUS USE. THE WRENCH WAS TESTED WITH SHOP AIR AND DID NOT WORK AT WHICH POINT WE ALSO NOTICED A STUCK TRIGGER HANDLE. THIS IS BEING SOLD AS/IS FOR PARTS OR REPAIR ONLY. INCLUDED: (1) AS/IS CHICAGO PNEUMATIC CP6120-D35L #5 SPLINE PNEUMATIC IMPACT WRENCH 3500RPM SPECIFICATIONS: MANUFACTURER: CHICAGO PNEUMATIC MODEL: CP6120-D35L PNEUMATIC IMPACT WRENCH DRIVE: #5 SPLINE FREE SPEED: 3500 RPM WORKING TORQUE: 600-2000 FT/LBS AIR CONSUMPTION: 60 CFM SOUND PRESSURE LEVEL: 97 DB LENGTH: 16.5" BLOWS PER MINUTE: 960 BPM

(10) NEW TY-FLOT TKIT-7284 TC6 TOOL COLLARS & TL6-SS LOOPS 0.72" TO 0.84" MANUFACTURER: TY-FLOT MODEL: TKIT-7284 TOOL COLLAR AND LOOP TOOL COLLAR: TC6 LOOP: TL6-SS TOOL DIAMETER COMPATIBILITY: 0.72" TO 0.84" MAX TOOL WEIGHT: 3 LBS

2017 SWEP B25HX16/1P-SN-S 3X21.6 SPEC HEAT EXCHANGER S/N: 013938.1 MAX-WORKING-PRESSURE:145PSI. MANUFACTURER: SWEP DOVER TYPE: B25HX16/1P-SN-S 3X21.6 SPEC SWEP ITEM #: 013938.1 MAX. WORKING TEMPERATURE TS F: PRIM: 400 SEC: 400 MAX. WORKING PRESSURE PS PSI: PRIM: 145 SEC: 145 TEST PRESSURE: PT PSI: PRIM: 217 SEC: 217 VOLUME V IN3: PRIM: 49.0 SEC: 56.0 ROHS COMPLIANT YEAR OF MANUF.: 2017 SKU: W02L019 2H-02-01(1) 18LBS - 25IN X 8IN X 8IN

URYU UX-500C OIL PULSE 90 RIGHT ANGLE NUTSETTER PNEUMATIC AIR DRIVER TOOL. MANUFACTURER: URYU. MODEL: UX-500C. CLUTCH TYPE: NON-SHUT OFF (CUSHION). MIN TORQUE: (NM) 13. FREE SPEED (RPM): 9300. OPERATION: LEVER START. STYLE: INLINE. ERROR PROOFING: NO. MAX TORQUE: (NM): 20. OUTPUT DRIVE: 3/8 IN SQUARE DRIVE. AIR CONSUMPTION: 8.8 CFM. CONDITION: USED. COMES IN NON ORIGINAL PACKAGING. THE NUTSETTER IS IN GOOD CONDITION WITH SOME PAINT CHIPS AND FEW SCRATCHES FROM PREVIOUS USE. TESTS INCLUDED PLUGGING IN THE NUTSETTER TO AN AIR LINE. WHEN THE LEVER WAS PRESSED DOWN, THE NUTSETTER SMOOTHLY WORKED IN FORWARD POSITION AS WELL AS IN REVERSE. NO FURTHER TESTING WAS PERFORMED.

2006 UNBRANDED 1M WIDE 1" BELT OPEN CENTER STANDALONE CONVEYOR W/ BECKHOFF WINDOWS COMPUTER. THIS UNIT IS IN GOOD COSMETIC CONDITION. IT WAS IN ITS FACTORY-NEW CRATE UNTIL WE UNBOXED FOR INSPECTION. THE ORIGINAL PROTECTIVE FILM IS STILL ON SEVERAL OF THE SIDE PANELS. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: WE WERE ABLE TO RUN THE CONVEYOR IN BOTH DIRECTIONS, RUN THE WIDTH ADJUSTMENT BOTH DIRECTIONS, OPERATE THE GRIPPERS AND STOPS, AND VERIFY OPERATION OF ALL PRODUCT SENSORS. WE USED 120V POWER FOR TESTING AND FOUND THE UNIT FUNCTIONAL BUT CAN'T GUARANTEE IT WILL WORK ON OTHER THAN 200-230V POWER. WE NOTED THE COMPUTER HAS AN INTERNAL CLOCK SET AT 2006, WHICH MAY MEAN THE BIOS BATTERY HAS DIED. WE DID NOT SEE A PASSWORD PROMPT, BUT IF THERE ARE ANY NECESSARY WE HAVE NO PASSWORDS FOR THIS MACHINE. NO OTHER TESTING WAS DONE. PLEASE NOTE: THE RIGHT-END ROLLERS ON BOTH SIDES OF THE CONVEYOR HAVE MINOR CLICKING NOISES FROM THEIR BEARINGS; WE ARE NOT SURE WHY. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) 1M OPEN-CENTER EDGE BELT CONVEYOR SPECIFICATIONS: OPEN-CENTER EDGE-BELTED CONVEYOR 1M TOTAL LENGTH RIGHT-TO-LEFT OR LEFT-TO-RIGHT MANUAL AND MOTORIZED WIDTH ADJUSTMENT, 20CM TO 63CM CENTER OPENING BETWEEN BELT EDGES 1" WIDE CLOTH-TOPPED BELTS BELTS ARE GEAR DRIVEN BY STEP MOTOR BECKHOFF AS1060-1000 WIDTH ADJUSTMENT DRIVEN BY STEP MOTOR BECKHOFF AS1050-0110 DUAL LINEAR RAILS (52CM LONG), CPC MR9M BEARINGS AND DUAL SCREWS FOR WIDTH ADJUSTMENT ENGRAVED SCALE SHOWS BELT OPENING WIDTH OPTICAL SWITCHES ON BOTH SIDES OF WIDTH ADJUSTMENT RANGE, LOOKS LIKE COULD BE SET AS NARROW AS 10CM PNEUMATIC PRODUCT STOPS "GRIPPERS/TRAY LOCKS" ON BOTH SIDES, (FESTO DFM-20-20-P-A-GF) TRAY LOCKS HAVE 5MM TO 25MM UNDER-STOP CLEARANCE, ONLY BLOCK A FEW MM ON OUTSIDE OF BELTS TRAY LOCKS HAVE AUTOSWITCHES FOR UP AND DOWN STOP PIN WITH 10MM STROKE INTERRUPTS PRODUCT FLOW (FESTO ADVC-10-10-A-P-A) (3) OPTICAL PRODUCT SENSORS, SICK WTB2S-SERIES ENTIRE CONVEYOR ASSEMBLY HAS A FLAT BOTTOM PLATE, SIMPLE TO INTEGRATE IN YOUR SETTING APPROXIMATELY 15.5CM FROM BOTTOM OF PLATE TO TOP OF CONVEYOR BELTS CONTROLLED BY BECKHOFF CX9020-0115/U900 INDUSTRIAL PC WITH WINDOWS 7 USER-FRIENDLY USER INTERFACE HMI IS A COLOR TOUCH SCREEN BECKHOFF CP2907 FESTO PNEUMATICS SMEMA CONVEYOR CONNECTIONS LARGE OPENING UNDER CONVEYOR BASE CABINET CONTAINS ELECTRONICS, OTHERWISE EMPTY POWER REQUIREMENT: 200-230V 1PHASE 50/60HZ 1.2KW WHEELS FOR EASY RELOCATION, ADJUSTABLE LEGS SKU: X29D005 5G-10-03(1) 300LBS - 48IN X 48IN X 48IN

[NEW] DEWALT DW8437 HIGH PERFORMANCE TYPE 27 GRINDING WHEELS 7" (10) - MANUFACTURER: DEWALT MODEL: DW8437. INCLUDED: (10) NEW DEWALT DW8437 HIGH PERFORMANCE TYPE 27 GRINDING WHEELS 7". SPECIFICATIONS: MANUFACTURER: DEWALT MODEL: DW8437 HIGH PERFORMANCE METAL GRINDING WHEELS TYPE 27 CONSTRUCTION: 3 FULL SHEETS OF FIBERGLASS FOR DURABILITY AND SAFETY PROPRIETARY MATERIAL: HIGH-PERFORMANCE ALUMINUM OXIDE GRAIN DIAMETER: 7" ARBOR/SPINDLE: 5/8"-11 IN THICKNESS: 1/8" SPEED: 8700 RPM. SKU: U46B001 1E-03-05(34) 12LBS - 14IN X 9IN X 10IN

ADEPT TECHNOLOGY 90400-20055 55CM LINEAR 2 AXIS XY ROBOT MODULE +CONTROLLER AND 300W DRIVES. MANUFACTURER: ADEPT TECHNOLOGY MODEL: 90400-20055. CONDITION: USED. THIS ROBOT IS IN GOOD COSMETIC CONDITION OVERALL, WITH MINOR COSMETIC BLEMISHES FROM PRIOR USE. THE WORST IS A CHIP IN THE PLASTIC END-CAP ON ONE OF THE LINEAR MODULES. THERE ARE ALSO LOTS OF DINGS ON THE LONGER MODULE NEAR THE DATA LABEL. WE ARE NOT ABLE TO PROVIDE SPECIFICATIONS ON THE SHORTER MODULE, AS ITS DATA LABEL IS NOT FULLY LEGIBLE. THERE IS AN E-CHAIN INSTALLED WITH SEVERAL AIR HOSES AND CABLES AVAILABLE FOR YOUR USE, LEFT OVER FROM THE PREVIOUS INSTALLATION. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THESE PARTS WERE REMOVED FROM A ROBOT CELL WHICH WAS INCOMPLETE WHEN WE RECEIVED IT. BOTH AXES OF LINEAR MOTION MOVE EASILY WITH HAND PRESSURE; NO OTHER TESTING WAS DONE. WE THINK THERE ARE A FEW PIECES MISSING (NOTABLY A TEACH PENDANT) BUT WHEN YOU COMPLETE AND INSTALL THIS UNIT, WE ARE HAPPY TO GUARANTEE IT WILL WORK FOR YOU. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) 2-AXIS LINEAR ROBOT AXIS (1) CONTROLLER (2) 90400-60131 300 WATT MOTOR DRIVES PILE OF ASSOCIATED CABLES. MANUFACTURER: ADEPT TECHNOLOGY INC. 2-AXIS ADEPT CARTESIAN ROBOT MODULE MODEL: 90400-20055/XY-HRS055-M201 AD LINEAR MOTION MODULE TRAVEL: 550MM MAX. SPEED: 1200MM/SEC 20MM PITCH BALL SCREW (1) 50MM LINEAR GUIDE 300W MOTOR WITHOUT HOLDING BRAKE. SHORTER MODULE: 90400-????? TRAVEL: APPROXIMATELY 40CM. CONTROLLER HOUSING/POWER SUPPLY: PA-4 WITH (1) 040 IDE, (1) VGB, (1) MI-6E, (2) DIO CARDS INSTALLED. SKU: O25D013 1B-12-05(1) 287LBS - 48IN X 45IN X 32IN

[SOUTH WELD 105Z61] CERAMIC TIG WELD GAS CUP NOZZLE #7 7/16" (30) - MANUFACTURER: SOUTH WELD MODEL: 105Z61 CONDITION: NEW OTHER. THESE NOZZLES ARE IN A NEW AND UNUSED COSMETIC CONDITION AND COME INDIVIDUALLY PACKAGED IN THE ORIGINAL SOUTH WELD BOXES OF 10 THAT DO SHOW SOME SIGNS OF SHELF WEAR AND OCCASIONALLY WRITING ON THE OUTSIDE OF THE BOX. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (30) SOUTH WELD 105Z61 #7 CERAMIC TIG WELD GAS CUP NOZZLE 7/16" SPECIFICATIONS: MANUFACTURER: SOUTH WELD MODEL: 105Z61 DESCRIPTION: CERAMIC TIG WELD GAS CUP NOZZLE #7 7/16" SKU: V02H040 4B-02-01(1) 5LBS - 7IN X 7IN X 7IN

[SOUTH WELD 57N74L] CERAMIC GAS LENS NOZZLE #8L 1/2" (30) - MANUFACTURER: SOUTH WELD MODEL: 57N74L CONDITION: NEW OTHER. THESE NOZZLES ARE IN A NEW AND UNUSED COSMETIC CONDITION AND COME INDIVIDUALLY PACKAGED IN THE ORIGINAL SOUTH WELD BOXES OF 10 THAT DO SHOW SOME SIGNS OF SHELF WEAR AND OCCASIONALLY WRITING ON THE OUTSIDE OF THE BOX. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (30) SOUTH WELD 57N74L #8L CERAMIC GAS LENS NOZZLE 1/2" SPECIFICATIONS: MANUFACTURER: SOUTH WELD MODEL: 57N74L DESCRIPTION: CERAMIC TIG WELD GAS LENS CUP NOZZLE #8L 1/2" SKU: V02H004 4B-04-02(1) 3LBS - 8IN X 8IN X 7IN

SEALANT EQUIPMENT ENGINEERING INC. PROGRAM-A-SHOT 997 MATERIAL DISPENSING SYSTEM. MEDIUM: 2-COMPONENT SILICONE, EPOXY, OR URETHANE FOR POTTING OR ENCAPSULATION APPLICATIONS. POWER: 480VAC SUPPLY VOLTAGE PHASE: 3 FREQUENCY: 60 HZ. DISPENSING VALVE: 2150-221-006, 3500PSI, BAYONET OUTLET PORT. RESIN CHAMBER DIMENSIONS: CONTROL PANEL: ALLEN BRADLEY PANELVIEW 1000 MODEL: 2711-T10C10 VOLTAGE: 100-240VAC 50/60 HZ CURRENT RATING: 0.8-0.4A 100VA. CPU: SLC 5/05 DEVICENET. POWER SUPPLY TRANSFORMER: EGS TYPE HS HEVI-DUTY MODEL: HS5F5AS PRIMARY VOLTAGE: 240/480 SECONDARY: 120/240 FREQUENCY: 60 HZ SINGLE PHASE 5.0 KVA 180 INSULATION CLASS. THE MACHINE ASSEMBLY IS IN USED CONDITION WITH SCUFFS, SCRATCHES, RESIDUE, AND GREASE FROM PREVIOUS REGULAR USE IN AN INDUSTRIAL SETTING. THE CPU AND CONTROL PANELS POWER ON. AN AIR SUPPLY HOSE WAS USED TO TEST AIRFLOW IN THE PNEUMATIC COMPONENTS. THE POWER SUPPLY OUTPUT VOLTAGES WERE TESTED AND OBSERVED TO BE AT PROPER LEVELS. NO FURTHER TESTING WAS PERFORMED AFTER REMOVAL. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN.

[NEW] TIG STAR T54N14 #8 12.5MM TIG TORCH NOZZLE. MANUFACTURER: TIG STAR MODEL: T54N14 DESCRIPTION: TIG TORCH NOZZLE #8 12.5MM ALUMINA GAS LENSE. SKU: V04H018 1A-02-02-06(1) 5LBS - 7IN X 7IN X 7IN.

[HEAT LINK 11654W] HEAT LINK 11654W 2" JAWS FOR POWER PRESS TOOL WITH PISTOL GRIP MANUFACTURER: HEAT LINK MODEL: 11654W DESCRIPTION: 2" JAWS FOR POWER PRESS TOOL WITH PISTOL GRIP COMPATIBLE WITH THESE 3RD-PARTY TOOLS NIBCO PC-280 NIBCO PC-100 RIDGID 320-E RIDGID RP330-B RIDGID CT400 RIDGID RP330-C RIDGID RP340 MILWAUKEE 2673-20 MILWAUKEE 2673-20L MILWAUKEE 2773-20 MILWAUKEE 2773-20L REMS 571011 REMS 577010 REMS 572111 REMS 571013 REMS 571014 SKU: V45H024 1E-14-02(1) 9LBS - 10IN X 10IN X 7IN

[USED] OPAL 70512360100 SDT TRANSFORMER ASSEMBLY MANUFACTURER: OPAL MODEL: 70512360100 DESCRIPTION: SDT ASSEMBLY VOLTAGE RATING: 120VAC 50/60HZ COMPATIBILITY: APPLIED MATERIALS SEMVISION CX SKU: R31U013 1B-02-03(1) 7LBS - 10IN X 10IN X 7IN

[32.5'] INDUSTRIAL CLOTH CONVEYOR BELT ROLL WHITE 32.5' LONG X 18" WIDE. MANUFACTURER: UNBRANDED MODEL: DOES NOT APPLY INDUSTRIAL CONVEYOR BELT MATERIAL: HEAVY DUTY CLOTH COLOR: WHITE LENGTH: ~390", 32.5" WIDTH: 18". THE BELT IS IN HEAVILY USED CONDITION WITH SCUFFS, SCRATCHES, AND RESIDUE FROM PREVIOUS USE, AS SHOWN IN THE PHOTOS. THERE ARE NO TEARS OR SIGNIFICANT DAMAGE TO THE UNIT.

DELTECH C7 FINAL FILTER ELEMENT REPLACEMENT CARTRIDGES (2) - MANUFACTURER: DELTECH MODEL: C7 CONDITION: NEW OTHER. COMES IN ORIGINAL PACKAGING. THE FILTERS ARE UNUSED. ONE OF THE FILTERS HAS BEEN REMOVED FROM THE ORIGINAL BOX FOR PHOTO PURPOSES. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (2) DELTECH C7 FINAL FILTER ELEMENT REPLACEMENT CARTRIDGES FOR DEL MONIX PURIFICATION SYSTEMS SPECIFICATIONS: MANUFACTURER: DELTECH MODEL: C7 FINAL FILTER ELEMENT REPLACEMENT CARTRIDGE FOR USE WITH DEL MONOX PURIFICATION SYSTEMS FILTER STAGES: 6 STAGES TO ACHIEVE SPECIFIED BREATHING AIR QUALITY LEVELS LENGTH: 11 5/8" DIAMETER: 60 MM MATERIAL: FIBERGLASS, ACTIVATED CHARCOAL OUTLET AIR CAPACITIES RANGE: 15 SCFM TO 940 SCFM SKU: S13B005 2O-08-03(1) 7LBS - 22IN X 15IN X 10IN

[INGERSOLL-RAND 3RPQ PNEUMATIC PUSH TO START 1/4 AIR DRIVE SCREWDRIVER/NUTRUNNER] MANUFACTURER: INGERSOLL-RAND MODEL: 3RPQ 1/4" DRIVE PUSH TO START REVERSE TWIST PUSH BUTTON QUICK CHANGE CHUCK 500 RPM REVERSIBLE 3LBS - 16IN X 8IN X 4IN

ROCKWELL DELTA MILWAUKEE BELT DRIVE 6" PRECISION JOINTER W/ CUSTOM ROLLING STAND. MANUFACTURER: ROCKWELL DELTA MILWAUKEE. MODEL: DOES NOT APPLY. CONDITION: USED. THIS JOINTER/PLANER IS IN GOOD COSMETIC CONDITION FOR A VINTAGE TOOL WITH SCUFFS, SCRATCHES, AND GENERAL WEAR. ALTHOUGH THE STAND LOOKS TO BE ORIGINAL THE ROLLING STAND THAT IS ATTACHED TO THE BOTTOM LOOKS TO BE CUSTOM. COMES IN NON-ORIGINAL PACKAGING. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: WE POWERED ON THIS JOINTER AND OBSERVED THE MOTOR RUNNING SMOOTHLY AND THE BLADE ROTATING AS DESIGNED. THE SAFETY GUARD MOVED BACK AND FORTH AND THE CASTERS ROLLED SMOOTHLY. NO ADDITIONAL TESTING IS PERFORMED. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) DELTA MILWAUKEE BELT DRIVE 6" PRECISION JOINTER W/ CUSTOM ROLLING STAND. SPECIFICATIONS: MANUFACTURER: DELTA MILWAUKEE. MODEL: DOES NOT APPLY. DESCRIPTION: BELT DRIVE 6" PRECISION JOINTER CUSTOM ROLLING STAND NJ255 CRAFTSMAN 115.19030 S-7712 1HP MOTOR. SKU: X43H033. 5I-21-01(1). 300LBS - 48IN X 40IN X 48IN

[UNBRANDED] ADJUSTABLE EDGE BELT CONVEYOR THK+HIWIN LINEAR XY AXES LINEAR GUIDE RAIL LFTO - MANUFACTURER: UNBRANDED MODEL: DOES NOT APPLY CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THIS ITEM IS IN FAIR COSMETIC CONDITION WITH LOTS OF DUSTY/GREASE RESIDUE FROM PRIOR USE. A FEW OF THE OPTICAL SWITCHES HAVE DAMAGED CASINGS. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS WAS REMOVED FROM A DECOMMISSIONED MACHINE AS A MODULE. THE AIR CYLINDERS MOVE WHEN AIR IS APPLIED. THE SCREW FOR THE WIDTH ADJUSTMENT TURNS EASILY BY HAND. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) ADJUSTABLE PROJECTING CONVEYOR SPECIFICATIONS: ADJUSTABLE-WIDTH EDGE BELT CONVEYOR (18" TO 2" BELT SEPARATION) CONVEYOR LENGTH: 25" CONVEYOR CAN BE PROJECTED UP TO 15" WITH ADJUSTABLE TRAVEL STOPS EFFECTIVE CONVEYOR LENGTH AFTER PROJECTION: APPROXIMATELY 40" LINEAR MOTION PARTS: BOTTOM RAILS: (2) THK SR25 RAILS, 64CM LONG, WITH 4 RECIRCULATING BALL-BEARING BLOCKS BOTTOM ACTUATOR: BIMBA RODLESS AIR CYLINDER TOP RAILS: (2) HIWIN MGN15H RAILS, 55CM LONG, WITH 4 RECIRCULATING BALL BEARING BLOCKS TOP ACTUATOR: STEP MOTOR DRIVING 1/2" SCREW BOTTOM HAS A "HELPER" CYLINDER AT ONE END OF TRAVEL, CAN BE A SHOCK ABSORBER OR ASSIST INITIAL MOTION STRENGTH FOR PROJECTION SWITCHES: OPTICAL SWITCH DETECTS OBJECT ON CONVEYOR OPTICAL SWITCHES DETECT MAXIMUM/MINIMUM CONVEYOR WIDTH OPTICAL SWITCHES DETECT ENDS OF PROJECTION TRAVEL HEAVY PLATE ALUMINUM CHASSIS ENCLOSED "E-CHAIN" STYLE WIRE MANAGEMENT ADJUSTABLE-HEIGHT LEVELING FEET EACH CORNER ELECTRONICS ON THE "LEFT" OUTSIDE DIMENSIONS APPROXIMATELY 27" X 25" X 10", 90LBS. SKU: X10D005 5K-19-02(1) 156LBS - 48IN X 40IN X 28IN

[SANYO R511-012W] SUPER R SERIES DC SERVO MOTOR RPM: 3000 WATTS: 110 VOLTS: 75 AMPS: 2.1, [SANYO E501000C30] OPTICAL SHAFT ENCODER INCREMENTAL: 1000 P/R MADE IN JAPAN, [THK DOES NOT APPLY] GROUND BALL SCREW LENGTH: 24.25" SHAFT DIAMETER: 0.629" FULL ASSEMBLY TOTAL LENGTH: 32" PITCH: 15.12 MM LEAD: 31.21 MM

[20" GRAVITY CONVEYOR SPRING GATE SECTION PASSTHROUGH] MANUFACTURER: INTERLAKE MODEL: BR0038 CONDITION: USED. COMES IN NON ORIGINAL PACKAGING. THE CONVEYOR GATE SECTION IS IN GOOD COSMETIC CONDITION WITH MINOR WEAR AND TEAR FROM PREVIOUS USE. HANDLES AND THE 3 SPRINGS ARE IN GOOD SHAPE. ROLLERS HAVE NO DENTS OR DINGS. COSMETICS MAY DIFFER SLIGHTLY FROM PICTURES. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: THE SPRINGS ON THE GATE WORKED WITH NO ISSUES. THE HANDLES OPENED AND CLOSED PROPERLY IN ORDER TO LIFT AND DESCEND THE GATE SMOOTHLY. NO FURTHER TESTING WAS PERFORMED. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) INTERLAKE SPRING GATE CONVEYOR SECTION SPECIFICATIONS: MANUFACTURER: INTERLAKE MODEL: BR0038 LENGTH OF ROLLERS: 17 1/2" DIAMETER OF ROLLER: 34.96 MM; 1.3 IN 3 SPRINGS 3" C/C 2218 36" 18IF KPL-21806 SKU: P39U001 5H-03-03(1) 265LBS - 58IN X 40IN X 45IN

CERAMIC TIG WELD CUP NOZZLE (30) - MANUFACTURER: WELDTEC MODEL: 798F73A CONDITION: NEW OTHER. THESE NOZZLES ARE IN A NEW AND UNUSED COSMETIC CONDITION AND COME INDIVIDUALLY PACKAGED IN THE ORIGINAL WELDTEC BOXES OF 10 THAT DO SHOW SOME SIGNS OF SHELF WEAR AND OCCASIONALLY WRITING ON THE OUTSIDE OF THE BOX. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (30) CERAMIC TIG WELD CUP NOZZLE SPECIFICATIONS: MANUFACTURER: WELDTEC MODEL: 798F73A DESCRIPTION: CERAMIC TIG WELD CUP NOZZLE #8L LONG 3/8" SKU: V02H025 4B-03-02(1) 2LBS - 8IN X 8IN X 4IN

SPRING-ASSIST 2"D GRAVITY ROLLER CONVEYOR WALK-THROUGH LIFT GATE 36"X 54" W/LEG. THIS CONVEYOR GATE IS IN GOOD COSMETIC CONDITION WITH SCUFFS AND SCRATCHES FROM REGULAR INDUSTRIAL USE AND COMES IN NON-ORIGINAL PACKAGING. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: WE HAD STAFF STAND ON ONE END OF THIS CONVEYOR GATE WHILE ANOTHER STAFF SUCCESSFULLY ACTUATED THE GATE OPEN AND CLOSED UTILIZING THE SPRING ASSIST ACTUATION. NO ADDITIONAL TESTING WAS PERFORMED. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) UNBRANDED SPRING ASSIST GRAVITY ROLLER CONVEYOR LIFT GATE 36.5" X 54" WITH LEG SPECIFICATIONS: MANUFACTURER: UNBRANDED MODEL: DOES NOT APPLY DESCRIPTION: SPRING ASSIST GRAVITY ROLLER CONVEYOR LIFT GATE WITH SINGLE LEG SECTION TOTAL WIDTH: 36.5" TOTAL LENGTH VERTICLE: 54" CONVEYOR SECTION HEIGHT: 3-1/2" (16) 2" DIA ROLLERS 33-1/2" ROLLER WIDTH (2) 6" LIFT HANDLES (1 EACH SIDE) (4) 1" DIA. SPRING ASSISTS YELLOW RAIL COLOR (1) TGW M6278756 SUPPORT ACC2-RF-22BF 29 5:41EL-2XM-STD CONVEYOR LEG SECTIONS SKU: Y12H023 5A-10-04(1) 275LBS - 65IN X 48IN X 40IN

[SHENZHEN YX-LP1000] SHENZHEN PENGLAI INDUSTRIAL CORP., LTD. YX-LP1000 VFFS POUCH FILLING MACHINE WATER POUCH FILLING MACHINE VERTICAL FORMING/FILLING/SEALING AND CUT-OFF OF FILLED POUCHES FORMS AND CUTS FILLED BAGS YIELDS 1000-2200 POUCHES/HOUR PACKING VOLUME: 100-1000 ML/P USED WITH 215MM WIDE FILM POWER: SINGLE PHASE 220V 60HZ 2.2KW STAINLESS STEEL MAIN CHASSIS TOUCHSCREEN USER INTERFACE. THIS MACHINE IS IN FAIR COSMETIC CONDITION, WITH MINOR SCUFFS/SCRATCHES/RESIDUES AND ADHESIVE TAPE RESIDUES HERE AND THERE. THE BACK DOOR LATCH DOES NOT HOLD SECURELY SO THE BACK DOOR OPENS EASILY. THE CONTROL PANEL IS MISSING SOME SCREWS. THE TEFLON ANTI-FRICTION TAPE ON WEAR SURFACES IS WORN IN SOME SPOTS, AND SHOULD BE REPLACED. WE ARE NOT SURE WHAT SIZE OF FILM THIS CAN USE; IT CAME TO US FITTED WITH 21.5CM WIDTH FILM. THERE ARE A FEW SMALL HOLES IN THE SIDES WITH NO APPARENT PURPOSE. NOTE THERE IS A HOLDER FOR A UV STERILIZING LAMP, BUT NO LAMP IS INSTALLED AND WE DON'T KNOW IF IT IS CURRENTLY WIRED TO POWER. THIS MACHINE IS IN GOOD WORKING CONDITION. WE VERIFIED IT WILL SEAL AND FILL POUCHES RELIABLY AFTER IT'S SET UP. THE TOUCH SCREEN IS RESPONSIVE TO TOUCH INPUTS. ONE OF THE O-RINGS TO SEAL THE FITTINGS AT THE WATER HOSE INLET IS TORN AND SPRAYS A LITTLE WATER. 830LBS - 48IN X 40IN X 98IN

SIEMENS 6ES5 482-8MA13 DIGITAL INPUT/OUTPUT MODULES (2) - MANUFACTURER: SIEMENS MODEL: 6ES5 482-8MA13 CONDITION: USED. COMES IN NON ORIGINAL PACKAGING. ITEMS ARE IN USED CONDITION WITH SCUFFS, SCRATCHES, AND RESIDUE FROM PREVIOUS USE. ONE ITEM HAS A CRACKED PIECE ON THE TOP OF THE UNIT. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: ITEMS WERE REMOVED FROM A DECOMMISSIONED MACHINE. NO FURTHER TESTING WAS PERFORMED AFTER REMOVAL. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (2) SIEMENS 6ES5 482-8MA13 PLC INPUT OUTPUT MODULES SPECIFICATIONS: MANUFACTURER: SIEMENS MODEL: 6ES5 482-8MA13 INPUT OUTPUT MODULE FOR PROGRAMMABLE LOGIC CONTROLLER COMPATIBLE W/ S5-90U/-95U/-100U, ET 100U, ET200U INPUTS: 16 OUPUTS: 16 VOLTAGE: 24 VDC INPUT/ OUTPUT AMPERES: 0.5 A MADE IN GERMANY

[USED] BASSICK 10-0H-S BRASS COLORED SWIVEL TYPE HEAVY DUTY CASTER WHEEL W/ BASE. WHEEL DIAMETER: 9.75". WHEEL WIDTH: 2.50". WHEEL MATERIAL: PHENOLIC/HARD PLASTIC. BASE DIMENSIONS: 6.25" X 4.50". BASE THICKNESS: 0.25". TOTAL HEIGHT: 11.50". BOLT HOLE WIDTH: 3.50" X 5.50".

[KALAMAZOO] [BELT SANDER] 3PH 230V WITH [SHOP FOX W1733A] 40"X20" DOWNDRAFT TABLE. MANUFACTURER: KALAMAZOO MODEL: DOES NOT APPLY INDUSTRIAL BELT SANDER ASSEMBLY AIRHOLE DIAMETER: 4" FRAME DIMENSIONS: 28.75" X 26.5" X18.25". DOWNDRAFT TABLE: MANUFACTURER: SHOP FOX MODEL: W1733A DOWNDRAFT TABLE LENGTH: 40" WIDTH: 20". MOTOR: MANUFACTURER: BALDOR MODEL: CM3545 INDUSTRIAL MOTOR HORSEPOWER: 1 VOLTAGE: 230/460VAC SPEED: 3450RPM TEMPERATURE RATING: 40C AMBIENT FRAME: 56 C FREQUENCY: 60 HZ. CONDITION: FOR PARTS OR NOT WORKING. THE MACHINE IS IN HEAVILY USED CONDITION WITH SCUFFS, SCRATCHES, AND RESIDUE FROM PREVIOUS USE. THE MOTOR POWERS ON BUT THE SANDING AREA IS DISASSEMBLED AND MISSING PARTS. SOLD AS/IS FOR PART OR REPAIR.

190-ACC 22" X 80' V-BELT CONVEYOR WITH LEGS AND MOTOR 3PHASE 460V POWERED MANUFACTURER: HYTROL 190-ACC SERIES LIVE-ROLLER CONVEYOR V-BELT DRIVEN MEDIUM DUTY FOR MINIMUM-PRESSURE ACCUMULATION OF CARTONS/BOXES/TOTES/ETC. FRAME WIDTH: 22" ROLLER WIDTH: 19" FRAME: 6.5" DEEP, 12GA. STEEL, POWDER-COATED GREEN ROLLERS: 1.3" DIAMETER 16GA. GALVANIZED TREAD ROLLERS ROLLERS ON 3" CENTERS ROLLERS PROTRUDE FROM THE TOP SLIGHTLY UNDERSIDE MOTOR DRIVE MOTOR: 460V 3PHASE 60HZ TEFC 1HP CONVEYING SPEED: 65FPM (CONSTANT) REVERSIBLE CAPACITY: 150LBS. PER FOOT OF CONVEYOR, MAXIMUM FINGER TIP PRESSURE ROLLER ADJUSTMENT, NO TOOLS REQUIRED ADJUSTABLE FLOOR SUPPORTS (19-5/8" ... 25-5/8") INCLUDED: (8) 120" CONVEYOR SECTIONS (9) ADJUSTABLE LEGS

[NEW] QUALTECH DWTHX1187 1-1/8"-7 CARBON STEEL HEX RETHREADING DIE RIGHT-HAND SIZE: 1-1/8"-7 STYLE: HEX DIE HEX SIZE: 2.0" THICKNESS: 1.0" MATERIAL: CARBON STEEL CURRING DIRECTION: RIGHT-HAND

[20] PROFAX TIG MASTER A796F76 #5XL CERAMIC NOZZLE 5/16" - MANUFACTURER: PROFAX MODEL: A796F76 CONDITION: NEW OTHER. THESE NOZZLES ARE IN A NEW AND UNUSED COSMETIC CONDITION AND COME INDIVIDUALLY PACKAGED IN THE ORIGINAL PROFAX BOXES OF 10 THAT DO SHOW SOME SIGNS OF SHELF WEAR AND OCCASIONALLY WRITING ON THE OUTSIDE OF THE BOX. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (20) PROFAX TIG MASTER A796F76 #5XL CERAMIC NOZZLE 5/16" SPECIFICATIONS: MANUFACTURER: PROFAX MODEL: A796F76 DESCRIPTION: TIG MASTER EXTRA-LONG CERAMIC GAS CUP NOZZLE #5XL 5/16" SKU: V02H038 4B-03-02(1) 2LBS - 8IN X 8IN X 4IN

[NEW] GATES TRI POWER COGGED V BELTS BX44 (1), BX46 (3) AND BX49 (1). MANUFACTURER: GATES. MODEL: BX44 TRI POWER V BELT TOP WIDTH: 21/32" OUTSIDE LENGTH: 47" OVERALL HEIGHT: 13/32" CONSTRUCTION: COGGED BAND TYPE: BELT WITH ENDS JOINED MATERIAL: EPDM NUMBER OF RIBS: 1 REINFORCING MATERIAL: POLYESTER OPERATING TEMPERATURE: -60 TO 250 F RESISTANCE FEATURES: OIL RESISTANT STANDARDS MET: RMA. MODEL: BX46 TRI POWER V BELT TOP WIDTH: 21/32" OUTSIDE LENGTH: 49" OVERALL HEIGHT: 13/32" CONSTRUCTION: COGGED BAND TYPE: BELT WITH ENDS JOINED MATERIAL: EPDM NUMBER OF RIBS: 1 REINFORCING MATERIAL: POLYESTER OPERATING TEMPERATURE: -60 TO 250 F RESISTANCE FEATURES: OIL RESISTANT STANDARDS MET: RMA. MODEL: BX49 TRI POWER V BELT TOP WIDTH: 21/32" OUTSIDE LENGTH: 52" OVERALL HEIGHT: 13/32" CONSTRUCTION: COGGED BAND TYPE: BELT WITH ENDS JOINED MATERIAL: EPDM NUMBER OF RIBS: 1 REINFORCING MATERIAL: POLYESTER OPERATING TEMPERATURE: -60 TO 250 F RESISTANCE FEATURES: OIL RESISTANT STANDARDS MET: RMA.

[UNBRANDED] 1-5/16 HSS HEX NUT SPIRAL FLUTE BRIDGE REAMER 8-1/2-IN LENGTH 2.60LBS. CONDITION: NEW. COMES NEW IN ORIGINAL PACKAGING. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) NEW 1-5/16 HSS HEX NUT SPIRAL FLUTE BRIDGE REAMER 8-1/2-IN LENGTH 2.60LBS SPECIFICATIONS: MANUFACTURER: UNBRANDED MODEL: 1-5/16 HSS DESCRIPTION: HSS HEX NUT SPIRAL FLUTE BRIDGE/CONSTRUCTION REAMER SIZE: 1-5/16" LENGTH: 8-1/2" WEIGHT: 2.60LBS SKU: U51U001 1B-06-01(11) 5LBS - 12IN X 6IN X 6IN

[24"] CONVEYOR TECHNOLOGIES CTI FL-24I PCB FLIP/PASSTHROUGH CONVEYOR RIGHT TO LEFT. FLIP STATION, CAN ALSO ACT AS STRAIGHT PASSTHROUGH. SINGLE FLIP PER CYCLE. PNEUMATIC FLIP ACTUATOR. TOTALLY ENCLOSED FOR SAFETY, INTERLOCKED DOOR. PLC CONTROLS WITH SMEMA CONNECTIONS. BOARD EDGE STYLE CONVEYOR. HAND-CRANKED WIDTH ADJUSTMENT. POWER: 120V 60HZ 3A PLUS COMPRESSED AIR. FAIR COSMETIC CONDITION WITH MINOR BLEMISHES FROM PRIOR USE, INCLUDING SCUFFS/SCRATCHES IN THE PAINT, MISSING COVER SCREWS AND ADHESIVE LABEL RESIDUES. GOOD WORKING CONDITION. FLIPS A TEST PIECE AND PRESENTS IT TO THE OUTLET SIDE. BOTH SIDES OF THE CONVEYOR RUN IN BOTH DIRECTIONS. BOARD SENSORS SENSE BOARDS. WIDTH ADJUSTMENT IS EASY. EMO STOP BUTTON WORKS. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. SKU: V48D003 5A-19-03(1) 650LBS - 51IN X 40IN X 60IN

[CST C-178-9] CST LARGE NYLON 50 PSI TUBE TYPE 9" X 2.5" SWIVEL CASTER WHEELS (4) - MANUFACTURER: CST MODEL: C-178-9 CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THESE CST TIRES ARE IN GOOD COSMETIC CONDITION AND STILL HAVE LOTS OF TREAD AS WELL AS SOME SCUFFS, SCRATCHES, AND RESIDUE FROM NORMAL USE BUT NOTHING THAT WOULD AFFECT FUNCTIONALITY. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THESE TIRES WERE PULLED FROM A WORKING ENVIRONMENT AND NO TESTING WAS PERFORMED AFTER REMOVAL. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (2) CST C-178-9 50 PSI. LARGE ANGLED SWIVEL TYPE NYLON TUBE TYPE CASTER WHEEL STYLE (2) CST C-178-9 50 PSI. LARGE STRAIGHT NYLON TUBE TYPE CASTER WHEEL STYLE SPECIFICATIONS: MANUFACTURER: CST MODEL: C-178-9 DESCRIPTION: CST C-178-9 50 PSI. LARGE NYLON TUBE TYPE CASTER WHEEL STYLE TWO STRAIGHT TYPE TWO ANGLED SWIVEL TYPE 50 PSI. TUBE TYPE WHEEL DIAMETER: 9" WHEEL WIDTH: 2.50" BASE DIMENSIONS: 4" X 4.50" TOTAL HEIGHT: 10" BOLT HOLE WIDTH: 3.75" X 3"

[NEW] HOUGEN 75630 7/8" CC ROUND DIE FOR PUNCH-PRO 75006PR PUNCH MACHINE. THIS ROUND DIE IS A NEW-OLD-STOCK ITEM AND COMES IN ITS ORIGINAL OPEN-BOX PACKAGING AND SHOWS MINOR SPOTS OF RUST AND OTHER MARKINGS TYPICAL FROM STORAGE AND HANDLING. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. SIZE: 7/8" CC MATERIAL THICKNESS: 5/16" MAX MATERIAL STYLE: C

[USED] MILWAUKEE 6700-20 SNAP-ACTION CLUTCH SCREWDRIVER POWER UNIT W/ATTACHMENT. COMES IN NON-ORIGINAL PACKAGING. THE TOOL IS IN USED CONDITION WITH SCUFFS, SCRATCHES, AND SOME RESIDUE FROM PREVIOUS USE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. THE UNIT WAS REMOVED FROM A DECOMMISSIONED ENVIRONMENT. THE UNIT POWERS ON AND SPINS BOTH WAYS AS INTENDED. NO FURTHER TESTING WAS PERFORMED AFTER REMOVAL. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) MILWAUKEE 6700-20 SNAP-ACTION CLUTCH SCREWDRIVER POWER UNIT W/ATTACHMENT. MANUFACTURER: MILWAUKEE MODEL: 6700-20 SNAP-ACTION CLUTCH SCREWDRIVER POWER UNIT VOLTAGE: 120VAC FREQUENCY: 60 HZ SPEED: 0-2500 RPM CURRENT RATING: 5 AMPS SKU: V12B013 1D-02-01(1) 9LBS - 22IN X 15IN X 8IN

[180CM EDGE BELT CONVEYOR] 180CM EDGE BELT CONVEYOR 5CM TO 305CM ADJ. WIDTH OPEN CENTER YOKOGAWA GEARMOTOR - MANUFACTURER: UNBRANDED MODEL: DOES NOT APPLY CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THIS CONVEYOR IS IN FAIR COSMETIC CONDITION WITH SOME UGLY-BUT-WORKS WIRING HANGING LOOSE, AS WELL AS DIRTY/DUSTY RESIDUES AND SCUFFS/SCRATCHES ALL OVER. THE GASKET ALL AROUND THE DOOR IS OLD AND FALLING APART. THE MACHINE HAS BEEN OBVIOUSLY REPAINTED WITH A BRUSH. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS CONVEYOR IS IN GOOD WORKING CONDITION. BOTH SECTIONS RUN AND THE SENSORS WORK. WHEN THE END SENSOR SEES AN OBSTRUCTION, THE OUTFEED CONVEYOR STOPS. IF THE END AND MIDDLE SENSORS BOTH SEE OBSTRUCTIONS (IN THAT ORDER) THEN BOTH SECTIONS STOP. IF JUST THE MIDDLE SENSOR SEES AN OBSTRUCTION, NEITHER CONVEYOR STOPS. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) 180 CM EDGE BELT CONVEYOR SPECIFICATIONS: OPEN-CENTER CONVEYOR EDGE BELT CONVEYOR GREAT FOR USE WITH CIRCUIT BOARDS OR SMALL PALLETS CONVEYOR TOTAL LENGTH: 1.8 METERS 2 SECTIONS INLINE, 1.2 M AND 60 CM 1 PHOTOELECTRIC SENSOR PER CONVEYOR SECTION CONVEYOR OPENING: 5 TO 305 CM BETWEEN RAILS, USER ADJUSTABLE WITH HANDWHEEL CONVEYOR HEIGHT: 38", ADJUSTABLE SMEMA COMPATIBLE PREVIOUS/NEXT CONNECTIONS ALL-RELAY CONTROL LOGIC, NO PLC OR COMPUTER CONTROLLER YOKOGAWA GEARMOTORS NO POWER SWITCH, IT RUNS WHEN CONNECTED TO MAINS 115V AC POWER SKU: U36D002 5F-14-03(1) 480LBS - 79IN X 40IN X 46IN

UNIVERSAL INSTRUMENTS 5362T 3 FOOT PC BOARD TRANSPORT CONVEYOR PCB 36" INCHES. MANUFACTURER: UNIVERSAL INSTRUMENTS CORPORATION PRODUCT CODE: 5362I PRODUCT TREE NO.: 43670701 OPEN-CENTER EDGE CONVEYOR 1 CONVEYOR SECTION CONVEYOR LENGTH: 36" MOTORIZED WIDTH ADJUSTMENT POWER: 110V 50/60HZ 3A T-SLOT AND CLEAR PLEXIGLAS TOP COVER WITH LENGTHWISE DOOR. THIS CONVEYOR IS IN FAIR COSMETIC CONDITION. THERE ARE LOTS OF DUSTY AND OILY RESIDUES FROM LONG WAREHOUSE STORAGE. THERE ARE ALSO SCUFFS/SCRATCHES AND ADHESIVE LABEL RESIDUES ALL OVER. THE MAIN POWER CABLE IS CRACKED RIGHT WHERE IT GOES INTO THE ELECTRONICS ENCLOSURE. THE OUTPUT BELT SPEED KNOB IS MISSING. THIS CONVEYOR IS IN GOOD WORKING CONDITION AS FAR AS WE CAN TEST. AT POWER-ON THE CONVEYOR BELTS RAN FOR SEVERAL SECONDS. THERE WAS SOME WHINE FROM THE MOTORS DURING RUNNING. WITH THE CHANGE WIDTH SET TO ENABLE, THE WIDTH CONSTANTLY ADJUSTED OPEN-AND-CLOSE BETWEEN THE LIMIT SWITCHES. WITH THE SWITCH SET TO DISABLE, THE OPEN AND CLOSE SWITCHES OPENED AND CLOSED THE WIDTH OF THE CONVEYOR. THE DOOR ON TOP RUBS A BIT ON OPENING AND CLOSING. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) UI 5362I CONVEYOR. SKU: W20D005 5F-08-01(1) 240LBS - 48IN X 40IN X 54IN

[NEW] EVERLINE ST96-865-DS004C 96" DOUBLE-SIDED LED SIGN TUBE 6,200 INITIAL LUMENS. NOMINAL LENGTH: 96", 8'. DESIGN: DOUBLE-SIDED. VOLTAGE: 24 VDC. INITIAL LUMENS: 6200. POWER OUTPUT: 48 W. LM/W: 129. LUMEN MAINTENANCE: L85>60KHRS @ 25C AMBIENT. COLOR CONSISTENCY: <4 SDCM (6500K). AMBIENT OPERATING TEMPERATURE RANGE: -22 F TO 140 F. SUITABLE FOR USE IN "DRY" AND "DAMP" LOCATIONS WHEN CONNECTED TO A CLASS 2 POWER SOURCE. 26LBS - 100IN X 12IN X 8IN

FLEETGUARD AF25708 GEN2 AIR FILTER ELEMENT 20.54" X 11.02" FOR CUMMINS C450 MANUFACTURER: FLEETGUARD MODEL: AF25708 CONDITION: NEW. COMES IN FACTORY SEALED ORIGINAL PACKAGING. NOTES: NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) NEW FLEETGUARD AF25708 AIR FILTER PRIMARY ELEMENT 20.54"X11.02" FOR CUMMINS C450 SPECIFICATIONS: MANUFACTURER: FLEETGUARD MODEL: AF25708 AIR FILTER PRIMARY ELEMENT OVERALL HEIGHT: 20.54" OVERALL OUTER DIAMETER: 11.02" INNER DIAMETER: 8.10" COMPATIBLE WITH CUMMINS C450 EQUIVALENTS: FLEETGUARD AF2570800, INLINE FFGAF25708, FFG-AF25708

[SULLAIR ES8-30DH/A] 30 HORSEPOWER ROTARY SCREW AIR COMPRESSOR - MANUFACTURER: SULLAIR MODEL: ES8-30DH/A. THE COMPRESSOR IS IN HEAVILY USED CONDITION WITH A FADED FINISH, SCUFFS, AND SCRATCHES FROM PREVIOUS USE. THE UNIT HAS HEAVY RESIDUE AND OXIDATION ON THE INSIDE FROM REGULAR USE IN AN INDUSTRIAL SETTING. THE FRONT CONTROL PANEL HAS WEAR AND HEAVY TEARING AS WELL. THE COMPRESSOR WAS POWERED ON AND WORKS AS INTENDED. THE COMPRESSED AIR DRYER INSIDE OF THE UNIT IS INOPERABLE. THE UNIT IS BEING SOLD AS/IS FOR PARTS OR REPAIR DUE TO THE DRYER UNIT BEING BROKEN AND HAVING MANY TENS OF THOUSANDS OF HOURS OF USE IN AN INDUSTRIAL SETTING. SPECIFICATIONS: MANUFACTURER: SULLAIR MODEL:ES8-30DH/A ROTARY SCREW INDUSTRIAL AIR COMPRESSOR OUTPUT: 30HP SPEED: 3540 RPM PRESSURE RATING: 118/128 PSIG VOLTAGE: 230/460 VAC MANUFACTURER: TOSHIBA MODEL:0225014-993R01 INDUSTRIAL AC MOTOR POWER: 30 HORSEPOWER VOLTAGE: 230/160VAC PHASE: 3 SPEED: 3540 RPM MANUFACTURER: SULLAIR MODEL: SUPERVISOR II COMPRESSOR CONTROL PANEL VOLTAGE: 120VAC FREQUENCY: 47-63 HZ TEMPERATURE RATING: 0-60 C

[LEBLOND MAKINO FNC-74-A20] TOOL CHANGER AUTOMATIC MACHINING-CENTER CNC CAT POD. MANUFACTURER: LEBLOND MAKINO MODEL: FNC-74-A20 CAT TOOL HEAD TURRET CONTROL: CNC (FANUC OM) 20 - TOOL PODS (INCLUDED) 20 POSITION TOOL POD CHAMBER AUTOMATIC TOOL CHANGER VERTICAL. 1269LBS - 61IN X 48IN X 48IN

[CYBEREX] 41-09-624004 PRINTED CIRCUIT BOARD EPO/SHUNT TRIP MODULE ASSEMBLY. MANUFACTURER: CYBEREX MODEL: 41-09-624004 EPO/SHUNT TRIP MODULE MOUNTING: PCB, 4 HOLES 0.19" DIAMETER RELAY: 24VDC, 3-10A CAPACITANCE: 680 UF, 250V BOARD LENGTH: 21" BOARD WIDTH: 3.25" TOTAL HEIGHT: 2.5". THE MODULE IS IN GOOD, LIGHTLY USED CONDITION WITH MINOR SCUFFS FROM PREVIOUS USE. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). THE BOARD WAS REMOVED FROM A DECOMMISSIONED MACHINE. NO FURTHER TESTING WAS PERFORMED AFTER REMOVAL. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN.

[IDEAL 45-930 STP SHIELDED TWISTED PAIR CABLE STRIPPING SYSTEM] STP SHIELDED TWISTED PAIR CABLE STRIPPING SYSTEM - PARTS - MANUFACTURER: IDEAL MODEL: 45-930 CONDITION: FOR PARTS OR NOT WORKING. COMES IN NON-ORIGINAL PACKAGING. THIS MACHINE IS IN FAIR COSMETIC CONDITION WITH LOTS OF MINOR SCUFFS/SCRATCHES/STAINS/RESIDUES FROM PRIOR USE. THERE IS A WARNING TO NEVER OPERATE THE MACHINE WITHOUT A TRAY . . . AND THERE IS NO TRAY. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS STRIPPER IS NOT WORKING PROPERLY. THE CYCLE *ALMOST* COMPLETES SUCCESSFULLY. AN INSERTED WIRE IS GRABBED, THE INSULATION IS STRIPPED, AND THEN THE MACHINE TELLS YOU TO REMOVE THE WIRE TO INSPECT THE CUT. AFTER RE-INSERTION (TO REMOVE THE INSULATION), THE MACHINE WON'T LET GO! WE ARE NOT SURE WHY. THE COVER HAS TO BE OPENED TO GET THE MACHINE TO SWITCH OFF AND RELEASE THE WIRE. THE COVER HAS TO BE CLOSED VERY CAREFULLY FOR THE SYSTEM TO TURN ON, BECAUSE THE INTERLOCK SWITCH IS FINICKY. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) IDEAL 45-930 STP STRIPPING SYSTEM SPECIFICATIONS: MANUFACTURER: IDEAL CAT. NO.: 45-930 STP STRIPPING SYSTEM THERMAL/MECHANICAL SHIELDED TWISTED PAIR CABLE STRIPPER AUTOMATICALLY ADJUSTS FOR CABLE SIZES UP TO 0.3125" DIAMETER STRIP LENGTHS ARE ADJUSTABLE 1.25" TO 6" CYCLE TIME AS LITTLE AS 6 SECONDS STORE UP TO 500 BATCH PROGRAMS INTERLOCKED TO PREVENT OPERATION WITH THE COVER OPEN FACILITY REQUIREMENTS: 115V 60HZ PLUS COMPRESSED AIR SKU: T40D001 5C-04-01(1) 75LBS - 25IN X 19IN X 16IN

[UNBRANDED] RUBBER COATED CONVEYOR ROLLER W/O AXEL GOLD COLOR 16.5" X 60MM X 2MM TREAD. CONDITION: USED. THIS CONVEYOR ROLLER IS IN GOOD COSMETIC CONDITION WITH ONLY MINOR SCUFFS AND SCRATCHES FROM REGULAR INDUSTRIAL USE AND HANDLING. COMES IN NON-ORIGINAL PACKAGING. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS ROLLER WAS REMOVED FROM DECOMMISSIONED EQUIPMENT AND HAS NOT BEEN TESTED. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) UNBRANDED RUBBER COATED CONVEYOR ROLLER W/O AXLE GOLD COLOR 16.5" X 60MM SPECIFICATIONS: MANUFACTURER: UNBRANDED MODEL: DOES NOT APPLY DESCRIPTION: RUBBER COATED CONVEYOR ROLLER W/O AXLE OVERALL LENGTH: 16.5" MAJOR DIAMETER (ROLLER DIAMETER): 60MM RUBBERIZED LENGTH: 15-11/16" AXLE HOLE DIAMETER: 15MM RUBBER THICKNESS: 2MM NO AXLE GOLD COLOR SKU: Y16H009 4B-01-04(1) 6LBS - 21IN X 6IN X 6IN

[USED] MST 9602-0400 FMK SATELLITE FTT DIGITAL CONTINUOUS GAS MONITORING SYSTEM MANUFACTURER: MST MODEL: 9602-0400 DESCRIPTION: CONTINUOUS GAS MONITORING SYSTEM DISPLAY: DIGITAL 12 - 24 VDC TYPE: CONTINUOUS GAS SENSOR: MODEL: 9602-5300 GAS DETECTION TYPE: CHLORINE, CL2 NOMINAL RANGE: 0 ... 5.00 PPM