Industrial Electronic Manufacturing Process Equipment Parts Tools Day 3 of 3 day event

[150-F 66-C] MARKAL 86463 THERMOMELT HEAT STICK (10) - MANUFACTURER: MARKAL MODEL: 86463 CONDITION: NEW OTHER. THESE HEAT STICKS ARE IN A NEW AND UNUSED COSMETIC CONDITION AND COME IN THE ORIGINAL MARKAL BOX THAT CONTAINS 10 STICKS. THE BOX SHOWS SOME MINOR WEAR FROM STORAGE. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (10) MARKAL 86463 THERMOMELT HEAT STICK TEMP 150-F 66-C SPECIFICATIONS: MANUFACTURER: MARKAL MODEL: 86463 DESCRIPTION: THERMOMELT HEAT STICK TEMP 150-F 66-C THE BIG STICK! SKU: U50H016 1B-19-01(2) 2LBS - 8IN X 8IN X 4IN

[ENDO KOGYO EWA-30] SNAP-BACK PREVENTION TOOL SPRING BALANCER 30KG CAPACITY - MANUFACTURER: ENDO KOGYO MODEL: EWA-30 CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THE BALANCER IS IN GOOD COSMETIC CONDITION WITH SOME MINOR SCUFFS AND CHIPS IN THE PAINT FINISH. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: THE BALANCER WAS REMOVED FROM A DECOMMISSIONED ENVIRONMENT. THE SPRING BALANCERS' WIRE ROPES EXPAND AND RETRACT WITH NO OBSTRUCTION WHEN THE SPECIFIED FORCE IS APPLIED. NO FURTHER TESTING WAS PERFORMED AFTER REMOVAL. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) ENDO KOGYO CO. EWA-30 SNAP-BACK PREVENTION SPRING BALANCER 30KG CAPACITY SPECIFICATIONS: MANUFACTURER: ENDO KOGYO MODEL: EWA-30 SNAP-BACK PREVENTION SPRING BALANCER CAPACITY: 30 KG CABLE TRAVEL: 4.93' COLOR: SAFETY YELLOW CABLE DIAMETER: 0 .187" NOMINAL CAPACITY RANGE: 22.0 TO 30 KG, 48.5 TO 66.1 LBS CABLE MATERIAL: STEEL SAFETY LATCHES ON BOTH TOP AND BOTTOM HOOKS

[190-ACC] HYTROL 22" X 70' V-BELT CONVEYOR WITH LEGS AND MOTOR 460V 3PHASE POWERED. MANUFACTURER: HYTROL MODEL: 190ACC. THIS CONVEYOR WAS WORKING WHEN IT WAS DISMANTLED. INCLUDED: (7) 120" CONVEYOR SECTIONS (8) ADJUSTABLE LEGS. SPECIFICATIONS: HYTROL 190-ACC SERIES LIVE-ROLLER CONVEYOR V-BELT DRIVEN MEDIUM DUTY FOR MINIMUM-PRESSURE ACCUMULATION OF CARTONS/BOXES/TOTES/ETC. FRAME WIDTH: 22" ROLLER WIDTH: 19" FRAME: 6.5" DEEP, 12GA. STEEL, POWDER-COATED GREEN ROLLERS: 1.3" DIAMETER 16GA. GALVANIZED TREAD ROLLERS ROLLERS ON 3" CENTERS ROLLERS PROTRUDE FROM THE TOP SLIGHTLY UNDERSIDE MOTOR DRIVE MOTOR: 460V 3PHASE 60HZ TEFC 1HP CONVEYING SPEED: 65FPM (CONSTANT) REVERSIBLE CAPACITY: 150LBS. PER FOOT OF CONVEYOR, MAXIMUM FINGER TIP PRESSURE ROLLER ADJUSTMENT, NO TOOLS REQUIRED ADJUSTABLE FLOOR SUPPORTS (19-5/8" ... 25-5/8") SKU: X16D005 6-TRL 1(1) 2700LBS - 131IN X 54IN X 56IN

GRACO MONARK AIR POWERED PUMP MODEL 222791 SERIES E01B

[NEW] HILTI 293025 TE-YX 1 1/4-15 (SDS MAX) 4-CUTTER HAMMER DRILL BIT 8-3/4-IN WL. MANUFACTURER: HILTI MODEL: 293025 DESCRIPTION: TE-YX 1 1/4-15 (SDS MAX) 4-CUTTER HAMMER DRILL BIT DIAMETER: 1-1/4" WORKING LENGTH: 8-3/4" OAL: 15". SKU: U50U018 2N-01-01(32) 5LBS - 19IN X 8IN X 4IN

ROBOHAND RPW-500M-1 SYNCHRONIZED PARALLEL JAW GRIPPER W/ QUICKSTOP QS-100NP-T3 MANUFACTURER: ROBOHAND MODEL: RPW-500M-1 CONDITION: USED. COMES IN NON ORIGINAL PACKAGING. THIS ITEM HAS SCUFFS AND SCRATCHES FROM PREVIOUS USE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS ITEM WAS REMOVED FROM A DECOMMISSIONED MACHINE. NO FURTHER TESTING WAS PERFORMED AFTER REMOVAL. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) ROBOHAND RPW-500M-1 PARALLEL JAW GRIPPER (1) APPLIED ROBOTICS QUICKSTOP QS-100NP-T3 SPECIFICATIONS: MANUFACTURER: ROBOHAND MODEL: RPW-500M-1 WIDE BODY PARALLEL GRIPPER HIGH GRIP FORCE: 667N SYNCHRONIZED MOTION STROKE: 1.5" ONE TOUCH QUICK RELEASE AIR FITTINGS MANUFACTURER: APPLIED ROBOTICS MODEL: QUICKSTOP QS-100NP-T3 OPERATING PRESSURE: 1.0-6.0 BAR ROTARY COMPLIANCE: NO LIMIT AVERAGE RESPONSE TIME:<15MS COMPLIANCE ANGLE:+/-5 DEGREES SKU: R37B005 4C-04-02(1) 8LBS - 12IN X 12IN X 8IN

[DANFOSS VLT-102 VARIABLE SPEED DRIVE INVERTER 3X INPUT/OUTPUT] MANUFACTURER: DANFOSS MODEL: 175B6013 CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THIS UNIT IS IN GOOD CONDITION COSMETICALLY WITH MINOR SIGNS OF USAGE BUT NOTHING THAT WOULD INTERFERE WITH NORMAL OPERATION. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS DRIVE WAS REMOVED FROM A DECOMMISSIONED ENVIRONMENT AND NOT TESTED SEPARATELY. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) DANFOSS 175B6013 VLT-102 VARIABLE SPEED DRIVE INVERTER SPECIFICATIONS: MANUFACTURER: DANFOSS MODEL: VLT-102 P/N: 175B6013 INPUT: 3 X 200/220/230V 3 X 7,9/7,2/6,8A 50/60 HZ OUTPUT: 3 X (0-200/220/230) V MAX. 8,5/ 7,7/7,5A 2.1KW 1-50/60 (100/120)HZ SKU: T15A009 5B-05-02(1) 52LBS - 25IN X 19IN X 16IN

BIMBA CUL-00284-A-508 ULTRAN RODLESS CYLINDER W/(2) DOUBLE ACTING CYLINDERS. MANUFACTURER: BIMBA MODEL: CUL-00284-A-508. CYLINDER LENGTH: 28" BORE: 1.307" STROKE: 24 1/4" BLOCK DIMENSIONS: 3 7/8" X 2 5/8" X 2 5/8" ACTUATION: COMPRESSED AIR OR HYDRAULIC MODEL: FSMD-095 DOUBLE ACTING CYLINDER BORE: 27 MM STROKE: 5 MM MODEL: FSMD-095-G DOUBLE ACTING CYLINDER BORE 27 MM STROKE: 5 MM

(4) PACKING SWIVEL TYPE HEAVY DUTY POLYURETHANE 3" CASTER WHEELS. MANUFACTURER: PACKING. MODEL: DOES NOT APPLY. DESCRIPTION: PACKING SWIVEL TYPE HEAVY DUTY POLYURETHANE 3" CASTER WHEELS. HEAVY DUTY SWIVEL TYPE. WHEEL DIAMETER: 3". WHEEL WIDTH: 2". BASE DIMENSIONS: 4" X 4". TOTAL HEIGHT: 4.25". BOLT HOLE WIDTH: 3 1/8". THE CASTERS ARE IN USED CONDITION WITH SCUFFS AND SCRATCHES FROM HEAVY REGULAR USE. THE WHEELS ROLL BUT COULD STAND TO BE GREASED. NO FURTHER TESTING WAS PERFORMED AFTER REMOVAL.

[SIEMENS SIGNALING 3-STACK LIGHT COLUMN 11" X 3.27" THREAD 0.94" RED,GREEN,ORANGE] MANUFACTURER: SIEMENS MODEL: DOES NOT APPLY INDUSTRIAL SAFETY SIGNALING COLUMN ELEMENTS: 3-RED, ORANGE, GREEN LENGTH: 11" DIAMETER: 3.27" THREAD DIAMETER: 0.94" CONNECTION: 7-WIRES, (3)BLACK, (3)WHITE, (1)GREEN

[HILTI TE56 INDUSTRIAL ROTARY HAMMER DRILL] 5/8"-1 9/16" SOLID BIT BAD CABLE - MANUFACTURER: HILTI MODEL: TE56 CONDITION: FOR PARTS OR NOT WORKING. COMES IN NON-ORIGINAL PACKAGING. THE DRILL IS IN HEAVILY USED CONDITION WITH SCUFFS, SCRATCHES, AND A DAMAGED POWER CABLE FROM PREVIOUS REGULAR USE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THE DRILL WAS REMOVED FROM A DECOMMISSIONED ENVIRONMENT. THE UNIT IS BEING SOLD AS/IS FOR PARTS OR REPAIR DUE TO THE DAMAGE ON THE POWER CABLE, AS SHOWN IN THE PHOTOS. THE POWER CABLE WILL LIKELY NEED REPLACEMENT AND THEREFORE WE COULD NOT TEST IT. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) AS/IS HILTI TE56 INDUSTRIAL ROTARY HAMMER DRILL 5/8"-1 9/16" SOLID BIT BAD CABLE SPECIFICATIONS: MANUFACTURER: HILTI MODEL: TE56 INDUSTRIUAL ROTARY HAMMER DRILL SOLID BIT: 5/8" TO 1 9/16" CORE BIT: UP TO 4 5/16" IMPACT ENERGY: 8.5 JOULES ACTIVE VIBRATION REDUCTION MAX NO LOAD SPEED: 280 RPM VOLTAGE: 120VAC INPUT POWER: 1100 WATTS SKU: X28B017 1D-06-01(1) 29LBS - 25IN X 19IN X 10IN

[HAPPINESS TECH] PN-26 FOR #8 SCREW PUSH NUT AND RETAINER INSTALLATION TOOL MANUFACTURER: HAPPINESS TECH MODEL: PART NUMBER 26 FOR #8 SCREW DESCRIPTION: PUSH NUT AND RETAINER INSTALLATION TOOL STUD SIZE #8 OVERALL LENGTH: 3.5" OUTSIDE DIAMETER: 0.500" STUD LENGTH CLEARANCE: 2.5" STUD CLEARANCE ID: 0.1940 THIS TOOL IS IN GOOD COSMETIC CONDITION WITH SCUFFS AND SCRATCHES FROM REGULAR INDUSTRIAL USE AND HAS HANDWRITING ON THE KNOB. COMES IN AN ORIGINAL FOAM SLEEVE AND NON-ORIGINAL PACKAGING. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: THIS TOOL HAS NOT BEEN TESTED. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) HAPPINESS TECH PN-26 FOR #8 SCREW PUSH NUT AND RETAINER INSTALLATION TOOL SKU: X02H020 4B-01-03(1)

[THK] [SHS20] LINEAR GUIDE RAIL W/ BALL BEARING LINEAR GUIDE BLOCK. LINEAR GUIDE RAIL LENGTH: 10.25" WIDTH: 0.80" HEIGHT: 0.65" MATERIAL: STAINLESS STEEL COLOR: COLOR. LINEAR GUIDE BLOCK ACTUATION: BALL BEARING LENGTH: 3.75" WIDTH: 2.5" HEIGHT: 1". THE GUIDE RAIL ASSEMBLY IS IN VERY GOOD, LIGHTLY USED CONDITION WITH MINOR SCUFFS AND SOME RESIDUE FROM PREVIOUS USE. THE GUIDE BLOCK MOVES ALONG THE GUIDE RAIL WITH NO IMPEDIMENT.

GATES SYNCHRO-POWER AT5X975 1311 POLYURETHANE BELTS 5MM PITCH. MANUFACTURER: GATES MODEL: AT5-976-16 SYNCHRO-POWER POLYURETHANE V-BELT NUMBER OF TEETH: 195 PITCH LENGTH: 975MM PITCH: AT5 5MM

(6) K INDUSTRIAL HEAVY-DUTY 2" SWIVEL TYPE STEEL ROLLING CASTER WHEELS SWIVEL TYPE WHEEL DIAMETER: 2" WHEEL WIDTH: 1" TOTAL HEIGHT: 2.75" BASE DIMENSIONS: 2.75" X 2.25" BOLT HOLE WIDTH: 1.50" X 2.25"

[CLECO 35RSATP-7Q] PNEUMATIC PISTOL GRIP 1/4" AIR SCREWDRIVER/NUTRUNNER DRIVER - MANUFACTURER: CLECO MODEL: 35RSATP-7Q CONDITION: USED. COMES IN NON ORIGINAL PACKAGING. THE SCREWDRIVER HAS SOME SCUFFS AND BLEMISHES FROM PREVIOUS USE. THERE IS SOME RUST RESIDUE, BUT NOTHING TO INTERRUPT FUNCTION. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: OUR TESTS INCLUDED PLUGGING IN THE SCREWDRIVER INTO AN AIR LINE HOSE. FORWARD AND REVERSE WORKED GREAT WITH NO ISSUES. NO FURTHER TESTING WAS PERFORMED. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) CLECO 35RSATP-7Q PISTOL GRIP AIR PNEUMATIC SCREWDRIVER/NUTRUNNER SPECIFICATIONS: MANUFACTURER: CLECO MODEL: 35RSATP-7Q TORQUE RANGE: 15-160 IN LB TORQUE RANGE: 2-18 NM FREE SPEED: 750 RPM 1/4" QUICK CHANGE SLIDING KNOB REVERSE TRIGGER START

RUBBERMAID 1045 TILT TRUCK, 2.5 CU. YD., 1800 LB (817 KG) CAPACITY

[LEBLOND MAKINO] FNC-74-A20 TABLE 4-AXIS MACHINING-CENTER AC-SERVO CNC CAT TABLE: MANUFACTURER: LEBLOND MAKINO MODEL: FNC-74-A20 CAT 4 - AXIS SLOTTED TABLE AREA: 17-3/4" X 35-1/2" AC SERVO MOTOR: MANUFACTURER: FANUC MODEL: 10S PULSE CODER TYPE: A06B-0315-B002 TORQUE (STALL): 12 NM AMP (STALL): 7.6 A INSULATION: CLASS F EXCIT. PERM. MAGNET VOLT: 150V 3 PHASE 60 HZ 8 POLES 2000 RPM SKU: T13L006 5A-20-04(1) 1950LBS - 78IN X 45IN X 32IN

PPI INDUSTRIAL SWIVEL 4" ROLLING CASTERS TWO LOCKING TWO STRAIGHT (4) MANUFACTURER: PPI MODEL: DOES NOT APPLY CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THE CASTERS ARE IN USED CONDITION WITH SCUFFS, SCRATCHES, AND SOME RESIDUE FROM PREVIOUS USE. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: THE CASTERS WERE REMOVED FROM DECOMMISSIONED MACHINES. THE CASTERS ROLL AND LOCK. NO FURTHER TESTING WAS PERFORMED AFTER REMOVAL. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (4) PPI INDUSTRIAL SWIVEL TYPE ROLLING CASTERS TWO LOCKING TWO STRAIGHT SPECIFICATIONS: MANUFACTURER: UNKNOWN MODEL: DOES NOT APPLY DESCRIPTION: PPI INDUSTRIAL ROLLING CASTERS TWO LOCKING TWO STRAIGHT SWIVEL TYPE WHEEL DIAMETER: 4" WHEEL WIDTH: 1.25" BASE DIMENSIONS: 3.75" X 2.75" BOLT HOLE WIDTH: 1.75" X 3"

[EAGLE MANUFACTURING] 1710 YELLOW 10" COLUMN PROTECTOR BLOW-MOLDED 100% HIGH DENSITY POLYETHYLENE PROTECTORS PROTECTION FOR WAREHOUSE AND FACTORY COLUMNS AND BEAMS FIT ROUND OR SQUARE SUPPORTS EASY INSTALLATION TWO HALVES ATTACH WITH EASY-TO-INSTALL STRAPS COLOR: YELLOW

[KABELSCHLEPP 0455 / 030.130.095] UNIFLEX CABLE/WIRE CARRIER 39.5"L X 6"W X 1.25"H - MANUFACTURER: KABELSCHLEPP MODEL: 030.130.095 CONDITION: USED. THE CABLE CARRIER ASSEMBLY IS IN GOOD, USED CONDITION WITH SOME SCUFFS AND SCRATCHES FROM THE PREVIOUS INSTALLATION. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THE CABLE CARRIER WAS REMOVED FROM A DECOMMISSIONED MACHINE. THE CARRIER BENDS AND UNWRAPS WITH NO OBSTRUCTION TO ANY OF THE INDIVIDUAL LINKS. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) KABELSCHLEPP 0455 / 030.130.095 UNIFLEX CABLE/WIRE CARRIER 39.5"L X 6"W X 1.25"H SPECIFICATIONS: MANUFACTURER: KABELSCHLEPP MODEL: 030.130.095 SERIES: 0455 CABLE CARRIER ASSEMBLY COLOR: BLACK ASSEMBLY LENGTH: 39.5" WIDTH: 6" HEIGHT: 1.25" FEATURES: HINGED, OPENABLE (ON RIGHT/LEFT), DETACHABLE BRACKETS PITCH: 45.5 MM BEND RADII KR MM: 52, 65, 95, 125, 150, 180, 200, 225 INSIDE WIDTH: BI IN MM 78 #52511 SKU: X07H001 1B-04-03(1) 5LBS - 12IN X 12IN X 10IN

[CLECO 8RNAL-7RA8] PNEUMATIC 90 RIGHT ANGLE 3/8" AIR DRIVE SCREWDRIVER/NUTRUNNER - MANUFACTURER: CLECO MODEL: 8RNAL-7RA8 CONDITION: USED. COMES IN NON ORIGINAL PACKAGING. THE SCREWDRIVER IS IN GOOD COSMETIC CONDITION WITH SOME SCUFFS FROM PREVIOUS USE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: OUR TESTS INCLUDED PLUGGING IN THE SCREWDRIVER INTO AN AIR LINE HOSE. THE FORWARD AND REVERSE POSITIONS WORKED GREAT WHILE PRESSING THE LEVER DOWN WITH NO ISSUES. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) CLECO 8RNAL-7RA8 90 RIGHT ANGLE PNEUMATIC SCREWDRIVER/NUTRUNNER SPECIFICATIONS: MANUFACTURER: CLECO MODEL: 8RNAL-7RA8 90 RIGHT ANGLE PUSH LEVER TO START REVERSE PUSH BUTTON 3/8" DRIVE SKU: Q12U012 1D-17-02(1) 6LBS - 18IN X 8IN X 4IN

[NEFF] 2-TON 3-PH HYDRAULIC BENCH PRESS SAFETY-CURTAINS ADJ-PRESS/SPEED 7"-TRAVEL S/N: 10665. MANUFACTURER: NEFF MODEL: UNKNOWN SN: 10665 DATE: 04-97 TONNAGE: 2 TON / 2300 PSI RAM TRAVEL: 7" SAFETY LIGHT CURTAINS PRESSURE ADJUSTMENT PRESSURE GUAGE SPEED ADJUSTMENT OPERATING PRESSURE: 300 - 2300 PSI 2 HP 230/460VAC 60 HZ 3 PHASE.

[UNBRANDED] [DOES NOT APPLY] CONVEYOR BELT ROLL 42' FABRIC TYPE INDUSTRIAL GRAY CONVEYOR BELT ROLL 36" WIDE 0.244" THICKNESS SPECIFICATIONS: MANUFACTURER: UNKNOWN MODEL: DOES NOT APPLY DESCRIPTION: CONVEYOR BELT ROLL COLOR: GRAY TYPE: FABRIC DIMENSIONS: ROLL LENGTH: 42' ROLL WIDTH: 36" BELT THICKNESS: 0.244"

[GREENHECK CUBE-30-50G CENTRIFUGAL UPBLAST EXHAUST FAN 7711-11880CFM 460V 3PH] THE FAN IS IN USED CONDITION WITH SOME SCUFFS, MINOR DENTS, AND WEATHERING ON THE EXTERIOR FINISH FROM THE PREVIOUS INSTALLATION. THE FAN WAS REMOVED FROM A DECOMMISSIONED FACILITY. THE FAN WAS CONNECTED TO 460V POWER AND THE MOTOR AND IMPELLER SPUN COUNTERCLOCKWISE AS INTENDED WITH NO OBSTRUCTIONS. THE UNIT IS CURRENTLY CONFIGURED FOR HIGH VOLTAGE POWER (460VAC) BUT CAN BE RECONFIGURED BY FOLLOWING THE WIRING DIAGRAM UNDER THE MOTOR'S ELECTRICAL HOUSING COVER. THE COVER IS MISSING THE TWO UNDERSIDE SCREWS. THE TOP/MOTOR COVER OF THE UNIT HAS SOME DENTS ON THE SURFACE AND ON THE INNER LIP, AS SHOWN IN THE PHOTOS. THERE IS A BENT SIDE ON THE BASE OF THE UNIT, AS SHOWN IN THE PHOTOS. INCLUDED: (1) GREENHECK CUBE-30-50G CENTRIFUGAL UPBLAST EXHAUST FAN 7711-11880CFM 460V 3PH SPECIFICATIONS: MANUFACTURER: GREENHECK MODEL: CUBE-30-50G CENTRIFUGAL UPBLAST EXHAUST FAN AIRFLOW: 7711-11880CFM FRPM RANGE: 630-730 VOLTAGE: 208V/460VAC, 60HZ PHASE: 3 MOTOR HORSEPOWER: 5 TOTAL DIMENSIONS: 50" X 50" X 36" RECOMMENDED ROOF OPENING: 36.5" X 36.5" DAMPER W XH: 34" X 34" IMPELLER DIAMETER: 30 3/4" BEARING SIZE: 1" HEIGHT: 36"

EBM PAPST W2E250-CL06-70 254MM DIAMETER AC AXIAL FAN 230 VAC 1100 CFM. THE FAN IS IN USED CONDITION WITH SCUFFS, SCRATCHES, AND A SMALL DENT WITH SOME FINISH CHIPPING. THE FAN WAS REMOVED FROM A DECOMMISSIONED MACHINE. NO FURTHER TESTING WAS PERFORMED. INCLUDED: (1) EBM PAPST W2E250-CL06-70 254 MM DIAMETER AC AXIAL FAN 230 VAC 1100 CFM SPECIFICATIONS: MANUFACTURER: EBM PAPST MODEL: W2E250-CL06-70 AC AXIAL FAN OPERATING SUPPLY VOLTAGE: 230 VAC DIAMETER: 254 MM ROUND DEPTH: 85 MM AIRFLOW: 1100 CFM BEARING TYPE: BALL NOISE: 71 DBA POWER RATING: 160 W TERMINATION: WIRE LEADS DEGREE OF PROTECTION: IP44

[WRIGHT TOOL 5852] #5 SPLINE DRIVE 6-POINT STANDARD IMPACT SOCKET SIZE: 1-5/8" SOCKET DIAMETER: 2-3/4" DRIVE DIAMETER: 2-7/16" LENGTH: 3-1/16" WEIGHT: 2.70LBS. MANUFACTURER: WRIGHT TOOL MODEL: 5852 DESCRIPTION: #5 SPLINE DRIVE 6-POINT STANDARD IMPACT SOCKET SIZE: 1-5/8" SOCKET DIAMETER: 2-3/4" DRIVE DIAMETER: 2-7/16" LENGTH: 3-1/16" WEIGHT: 2.70LBS SKU: U47U001 2O-08-02(5) 5LBS - 6IN X 6IN X 4IN

(1) PERFECTION EQUIPMENT INC. MINI-1 INDUSTRIAL GLYCOL CIRCULATOR 1/3HP COMPRESSOR MANUFACTURER: PERFECTION EQUIPMENT INC. MODEL: MINI-1 INDUSTRIAL GYCOL CIRCULATOR LINE RUNS: UP TO 100 FEET MULTIPLE DISPENSING LOCATIONS CONSTANT RUNNING COMPRESSOR, SELF-STARTING AFTER POWER FAILURE COMPRESSOR POWER: 1/3 HORSEPOWER COOLANT SYSTEM: 2/1 WATER/GLYCOL MIXTURE PUMP: 60 GPH, BRASS ELECTRICAL SPECIFICATIONS: 117 VOLTS AC, 60 HZ, SINGLE PHASE, 20 AMP DIMENSIONS: 27 3/4" X 15" X 12" LOCATION UNIT IS INSTALLED MUST NOT EXCEED 85 F WITHOUT PROPER VENTILATION HEAT OF REJECTION: 3802 BTU/HR

[UNBRANDED] [DOES NOT APPLY] SILVER STAINLESS STEEL GEAR TRACKS 90 DEGREE TEETH .59"W .78"H (2) MANUFACTURER: UNBRANDED MODEL: DOES NOT APPLY CONDITION: NEW OTHER. COMES IN NON-ORIGINAL PACKAGING. THE GEAR TRACKS ARE UNUSED. THERE ARE SOME MINOR SCUFFS AND SOME GREASE RESIDUE FROM PROLONGED STORAGE AND SHELF-WEAR. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (2) 39.25" SILVER STAINLESS STEEL GEAR TRACKS 90 DEGREE TEETH .59" W .78"H SPECIFICATIONS: MANUFACTURER: UNBRANDED MODEL: DOES NOT APPLY GEAR TRACK COLOR: SILVER CONSTRUCTION MATERIAL: STAINLESS STEEL GEAR TOOTH ORIENTATION: STRAIGHT, 90 DEGREES LENGTH: 39 1/4" WIDTH: 0.59", 15 MM HEIGHT: 0.78", 20 MM 5 TEETH PER 1" MOUNTING: SIDE MOUNTING MOUNTING HOLE DIAMETER: 0.28" DIAMETER SKU: T19B011 2G-05-02(3) 13LBS - 44IN X 8IN X 4IN

[SHENZHEN PENGLAI INDUSTRIAL YX-LP1000] VFFS 100-1000ML AUTOMATIC POUCH SACHET WATER BAG FILLING SEAL. CONDITION: USED. THIS MACHINE IS IN FAIR COSMETIC CONDITION, WITH AN UNUSUAL TWIST: THE PREVIOUS OWNER TRIED TO USE IT WITH A SHEA BUTTER PRODUCT, BUT FOUND IT DID NOT WORK PROPERLY WITH A VISCOUS FLUID. THERE IS THICK GREASY RESIDUE IN THE NOOKS AND CRANNIES, AND IN THE INSIDES OF THE PIPES AS WELL. YOU WILL WANT TO GIVE IT A GOOD CLEANING BEFORE PUTTING IT BACK INTO SERVICE! ALSO, THE BACK DOOR LATCH DOES NOT HOLD SECURELY SO THE BACK DOOR OPENS EASILY. THE CONTROL PANEL IS MISSING SOME HARDWARE, AND IS PARTIALLY HELD ON WITH TAPE. THERE ARE SCUFFS/SCRATCHES AND MINOR (NORMAL) RESIDUES FROM USE INSIDE AND OUT AS WELL. THE BOTTOM/REAR PANEL (UNDER THE DOOR) IS BENT/LOOSE. THE TEFLON ANTI-FRICTION TAPE ON WEAR SURFACES IS WORN IN SOME SPOTS, AND SHOULD BE REPLACED. THE FEET HAVE BEEN WELDED TO THE SHOWN METAL PLATFORM. WE ARE NOT SURE WHAT SIZE OF FILM THIS CAN USE; IT CAME TO US FITTED WITH 21.5CM WIDTH FILM. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS MACHINE IS IN GOOD WORKING CONDITION. WE VERIFIED IT WILL SEAL AND FILL POUCHES RELIABLY AFTER IT'S SET UP, AS SHOWN IN THE ACCOMPANYING VIDEO. THE TOUCH SCREEN IS RESPONSIVE TO TOUCH INPUTS. THE UV LIGHT INSIDE SHINES BRIGHTLY. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) SHENZHEN YX-LP100 VFFS POUCH FILLING MACHINE SPECIFICATIONS: MANUFACTURER: SHENZHEN PENGLAI INDUSTRIAL CORP., LTD. MODEL: YX-LP1000 WATER POUCH FILLING MACHINE VERTICAL FORMING/FILLING/SEALING AND CUT-OFF OF FILLED POUCHES UV STERILIZER FOR BAG MATERIAL FORMS AND CUTS FILLED BAGS YIELDS 1000-2200 POUCHES/HOUR PACKING VOLUME: 100-1000 ML/P USED WITH 215MM WIDE FILM POWER: SINGLE PHASE 220V 60HZ 2.2KW STAINLESS STEEL MAIN CHASSIS TOUCHSCREEN USER INTERFACE SKU: Y21D002

[40] SOUTH WELD 12N03 #4 LONG CERAMIC CUP NOZZLE 1/4" - MANUFACTURER: SOUTH WELD MODEL: 12N03 DESCRIPTION: CERAMIC TIG WELD CUP NOZZLE #4 LONG 1/4" FOR 17, 18 TORCHES SKU: V02H010 1E-01-04(6) 5LBS - 10IN X 10IN X 10IN

(8) 5" X 1.25" BALL BEARING INDUSTRIAL CASTER WHEELS RED/BLACK HARD RUBBER MANUFACTURER: UNBRANDED MODEL: DOES NOT APPLY INDUSTRIAL REPLACEMENT CASTER WHEELS WHEEL DIAMETER: 5" WHEEL WIDTH: 1.25" WHEEL MATERIAL: HARD PLASTIC INTERIOR, HARD RUBBER WHEEL COLOR: BLACK/RED ACTUATION: BALL BEARING BALL BEARING PIN INLET: 0.36"

BEST WELDS 4.25" X 5.25" HARDENED GLASS FILTER PLATE #10 (44) - DESCRIPTION: HARDENED GLASS WELDING FILTER PLATE 4.25 X 5.25" #10 SHADE. SPECIFICATIONS: MANUFACTURER: BEST WELDS MODEL: 932-107-10 SKU: V05H003 1B-11-02(1) 16LBS - 10IN X 10IN X 10IN

2018 UNBRANDED 1M OPEN-CENTER EDGE BELT CONVEYOR BECKHOFF STEP MOTORS, ADJUSTABLE. OPEN-CENTER EDGE-BELTED CONVEYOR 1M TOTAL LENGTH MANUAL AND MOTORIZED WIDTH ADJUSTMENT, 15 TO 57CM CENTER OPENING BETWEEN BELT EDGES 1" WIDE CLOTH-TOPPED BELTS BELTS ARE GEAR DRIVEN BY STEP MOTOR BECKHOFF AS1060-1000 WIDTH ADJUSTMENT DRIVEN BY STEP MOTOR BECKHOFF AS1050-0110 DUAL LINEAR RAILS (52CM LONG), CPC MR9M BEARINGS AND DUAL SCREWS FOR WIDTH ADJUSTMENT OPTICAL SWITCHES ON BOTH SIDES OF WIDTH ADJUSTMENT RANGE PNEUMATIC PRODUCT STOPS "TRAY LOCKS" ON BOTH SIDES, (FESTO DFM-20-20-P-A-GF) TRAY LOCKS HAVE 5MM TO 25MM UNDER-STOP CLEARANCE, ONLY BLOCK A FEW MM ON OUTSIDE OF BELTS TRAY LOCKS HAVE AUTOSWITCHES FOR UP AND DOWN STOP PIN WITH 10MM STROKE INTERRUPTS PRODUCT FLOW (FESTO ADVC-10-10-A-P-A) (3) OPTICAL PRODUCT SENSORS, SICK WTB2S-SERIES ENTIRE ASSEMBLY HAS A FLAT BOTTOM PLATE, SIMPLE TO INTEGRATE IN YOUR SETTING APPROXIMATELY 59.5 CM WIDE APPROXIMATELY 15.5CM FROM BOTTOM OF PLATE TO TOP OF CONVEYOR BELTS ENGRAVED SCALE SHOWS BELT OPENING WIDTH HEAVY PLATE ALUMINUM CHASSIS CONSTRUCTION LOTS OF ROLLER SUPPORTS (WITH BALL BEARINGS EACH SIDE OF ROLLERS) I/O BOX GIVES CENTRAL LOCATION TO HOOK UP ALL THE SWITCHES & SENSORS INCLUDED: (1) 1M OPEN-CENTER CONVEYOR MODULE (1) CABLE FOR ROLLING MOTOR (1) CABLE FOR WIDTH MOTOR (1) CABLE FOR I/O BOX (1) 1MM POLYURETHANE HOSE

[48"] QUICKDRAW MR OPEN-CENTER SLIP-ROLLER FIXED MOUNT CONVEYOR SYSTEM ESD - MANUFACTURER: QUICKDRAW MR-SERIES CONVEYORS CONVEYOR LENGTH: 48" OPEN-CENTER BELT-DRIVEN SLIP-ROLLER EDGE CONVEYOR SLIP ROLLERS ALLOW CONTROLLED ACCUMULATION OF PARTS ESD SAFE T-SLOT MOUNTING RAIL BENEATH CONVEYOR LEFT AND RIGHT SIDE, BOTH MOTORIZED

[UNIVERSAL INSTRUMENTS] LINEAR/ROTARY ACTUATOR WITH 8CM TRAVEL, PNEUMATIC/SERVO DRIVEN. MANUFACTURER: UNIVERSAL INSTRUMENTS. MODEL: DOES NOT APPLY. CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THIS ASSEMBLY IS IN FAIR COSMETIC CONDITION WITH MINOR VISIBLE WEAR AND RESIDUES FROM PRIOR USE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS LOT WAS REMOVED FROM A DECOMMISSIONED UNIVERSAL 4559A UTI, AND NOT TESTED UNDER POWER. ALL PARTS MOVE EASILY WITH LIGHT HAND PRESSURE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) UNIVERSAL VACUUM-ENDED LINEAR AND ROTARY ACTUATOR. SPECIFICATIONS: MANUFACTURER: UNIVERSAL INSTRUMENTS. LINEAR AND ROTARY MOTION ACTUATOR. VACUUM SUCTION ON BOTH END EFFECTORS. RETRACTED/HOME SWITCHES ON BOTH END EFFECTORS. LARGE SOFT PAD END EFFECTOR, 8CM DIAMETER, 8CM TRAVEL. PNEUMATIC ACTUATION FOR EXTEND AND RETRACT. SMALL CYLINDER END EFFECTOR. SPRING-LOADED PLUNGER. SWITCH TO SENSE WHEN PLUNGER IS PRESSED. PLUNGER CAN ROTATE FREELY THROUGH 360 DEGREES. PLUNGER CAN ROTATE ALONG ENTIRE LENGTH OF LINEAR TRAVEL. PLUNGER TRAVEL ABOUT 9CM, ADJUSTABLE UP-STOP. SERVO MOTOR DRIVEN ROTATION. SERVO MOTOR DRIVEN EXTENSION. SPRING-LOADED TO RETRACT AS SHOWN. MARKED SUBASSEMBLIES: (1) COMPUMOTOR CM160AE-00586 SERVO MOTOR, 100V 2.6A 14.1OZ-IN. (1) COMPUMOTOR CM161AE-00143 SERVO MOTOR, 340V 2.1A 24OZ-IN. (2) SMC NZX1101-K15LZ-D VACUUM EJECTORS WITH VJ114-5LOZ VALVES. (1) SMC VQD1151-5M VALVE. UNKNOWN PURPOSE LITTLE CIRCUIT BOARD ON BACK.

2001 SWEP B25HX16/1P-SN-S HEAT EXCHANGER 3X21.6 1.2 MPA PRI 0.798L SEC. 0.912L HEAT EXCHANGER 3X21.6 1.2 MPA MAX PRESSURE TEST PRESSURE 2.4 MPA VOLUME: PRIMARY 0.798L SECONDARY 0.912L SWEP ITEM NO 013938.1 SKU: W35H014 2O-06-01(2) 18LBS - 25IN X 8IN X 8IN

[CMC 62" SLIP ROLLER CONVEYOR] MOTOVARIO 3PHASE AC GEARMOTOR - MANUFACTURER: CMC MODEL: DOES NOT APPLY CONDITION: USED. THIS CONVEYOR IS IN FAIR COSMETIC CONDITION. THE CONTROL HANDWHEEL IS CRACKED BUT THE KNOB STILL TURNS ITS SHAFT. THERE ARE SCUFFS/SCRATCHES AND SMALL AREAS OF ADHESIVE LABEL RESIDUES HERE AND THERE ALL OVER. THE ROLLERS HAVE WORN THE DIVIDERS, AND THE DIVIDERS HAVE WORN THE ROLLERS, BUT THEY STILL WORK FINE DESPITE VISIBLE RUB-MARKS. THE TOP PAIR OF HOLES FOR THE STAINLESS STEEL END COVER ARE STRIPPED OUT. THERE ARE A COUPLE OF CONNECTORS ON THIS UNIT AND WE DO NOT KNOW WHAT THEY SHOULD BE CONNECTED TO, TO MAKE IT RUN! THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS CONVEYOR WAS REMOVED FROM A WORKING SYSTEM AND NOT TESTED SEPARATELY. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) CMC62" SLIP ROLLER CONVEYOR SPECIFICATIONS: MANUFACTURER: CMC ROLLER CONVEYOR ZERO-PRESSURE ACCUMULATION ON 1 TO 4 SECTIONS CONVEYOR LENGTH: 62" CONVEYOR HEIGHT: 33" (ADJUSTABLE) MAXIMUM WIDTH OF ROLLER SECTION: 20.5" MINIMUM WIDTH BETWEEN GUARD RAILS: 8.75" (4) PRODUCT STOPS (4) 15" LONG SECTIONS BETWEEN DIVIDERS STOPS ARE POWERED BY FESTO PNEUMATICS T-SLOT ALUMINUM FRAME MOTOR: MOTOR: MOTOVARIO TS71B2 3PHASE, 230/265/400/460V 50/60HZ 650W IP55 GEARBOX: MOTOVARIO 7354425-001 VH 005/A51 GEARBOX OUTPUT DRIVES A LENGTHWISE DRIVESHAFT ROLLER SHAFTS ARE DRIVEN BY A LOT OF BABY RUBBER BANDS ATTACHED TO DRIVESHAFT ROLLERS ARE LOOSE ON SHAFTS SKU: X07D006 6-BILR1(1) 435LBS - 71IN X 40IN X 45IN

INA LFKLMLF52145ZR TRACK ROLLER LINEAR GUIDE BLOCK WITH COMPACT CARRIAGE - MANUFACTURER: INA MODEL: LFKLMLF52145ZR CONDITION: NEW OTHER. COMES IN ORIGINAL PACKAGING. THE TRACK ROLLER IS IN NEW OLD STOCK/ UNUSED CONDITION WITH MINOR SCUFFS FROM SHELF WEAR/ PROLONGED STORAGE. THE ORIGINAL BOX HAS MINOR TEARS AND DAMAGE FROM SHELF WEAR/ STORAGE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) INA LFKLMLF52145ZR TRACK ROLLER GUIDANCE SYSTEM WITH COMPACT CARRIAGE SPECIFICATIONS: MANUFACTURER: INA MODEL: LFKLMLF52145ZR TRACK ROLLER LINEAR GUIDANCE SYSTEM WITH COMPACT CARRIAGE BALL BEARING LOW AND UNIFORM RESISTANCE TO DISPLACEMENT, GIVING IMPROVED POSITIONING AND RUNNING ACCURACY MODULAR DESIGN ROLLED PRECISION STEEL SHAFTS HARDENED TO HRC 60 LENGTH: 8.875", 225.425 MM WIDTH: 5.67", 144.25 MM HEIGHT: 2.11", 53.8 MM MADE IN GERMANY SKU: R49B038 2C-05-03(1) 11LBS - 16IN X 12IN X 8IN

(1) HUBLAST 08600 1.6-TON 1500 KG MANUAL HAND CHAIN HOIST CSTAFF HUB:3M SILBERBLAU SPECIFICATIONS: MANUFACTURER: HUBLAST TYPE: 08600 CHAIN LENGTHS: UNKNOWN CAPACITY: 1.6-TON (1500 KG) OPERATION: MANUAL HAND TYPE: CHAIN HOIST HUB: 3M CSTAFF SILBERBLAU SKU: W51L003 5C-02-02(1)

[MILLIPORE LR300] MULTI-CHANNEL DISPLAY CONTROLLER MILLIPORE LR300 24VDC 4-CHANNEL W/ DISPLAY [KYTEK KT3010] DIGITAL CYLINDER SCALES SKU: V45H016 2F-05-02(1) 52LBS - 16IN X 16IN X 12IN

EISELE EPL40/1 PLANETARY GEAR BOX I=5 6.5NM OUTPUT 13NM MAX TORQUE

[ROACH CONVEYOR PNEUMATIC/ELECTRIC BOX PUSHER PRIMO SORT EXTENDS:16" 75/MIN HISPD] MANUFACTURER: ROACH CONVEYORS MODEL: PRIMO SORT CONDITION: USED. THIS ITEM COMES IN NON-ORIGINAL PACKAGING. IT HAS SCUFFS AND SCRATCHES FROM NORMAL USE. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: THIS ITEM WAS NOT FULLY TESTED SINCE WE DO NOT HAVE THE PROPER RESOURCES. MANUALLY THE CYLINDER(S) CAN BE PULLED OUT AND PUSHED IN THE WAY THEY ARE NOW WITHOUT ANY EXTERNAL SOURCES CONNECTED TO THEM. WHEN THEY ARE PULLED OUT AN EXTERNAL AIR SOURCE PUSHES THEM BACK IN EASILY WITH NO PROBLEMS. WE DID NOT TEST THE ELECTRICAL SETUP FOR THIS SORTER. NO FURTHER TESTING WAS PERFORMED. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) ROACH CONVEYOR PNEUMATIC/ELECTRICAL BOX PUSHER PRIMO SORT EXTENDS:16" 75SORT/MIN SPECIFICATIONS: SORTER: MANUFACTURER: ROACH CONVEYORS MODEL: PRIMO SORT HIGH SPEED: UP TO 75 SORTS PER MINUTE GREEN BASE: 57" X 12" CYLINDER: MANUFACTURER: PARKER 4MA SERIES ENVELOPE PRESSURE: 250 PSI AIR VALVE: MANUFACTURER: MAC MODEL: MV-A2B-A111-PM-591CA PUSHER: DIMENSIONS: 12" X 5" EXTENDS: 16" ELECTRICAL: +- 24VDC SINGLE SOLENOID 2 HALL EFFECT SENSORS SKU: W19L001 5I-13-02(3) 220LBS - 67IN X 40IN X 24IN

2004 CONVEYOR TECHNOLOGIES TT-30I-4S-B1-0640 MULTI-LINE PCB TURNTABLE NOT RUNNING - PARTS. MANUFACTURER: CONVEYOR TECHNOLOGIES INC. (CTI) MODEL: TT-30I-4S-B1-0640 MULTI-LINE TURNTABLE CIRCUIT BOARD TURN TABLE CAPABLE OF RECEIVING BOARDS AT RIGHT/LEFT/REAR, THEN SENDING TO EITHER OF THE OTHER EXITS FOR RIGHT-ANGLE OR STRAIGHT-THROUGH PROCESS LINES BOARD SIZE: 2" X 4" TO 16" X 18" CONVEYOR HEIGHT: 37.5" +/-2" CYCLE TIME: 12 SECONDS OMRON CQM1 PLC WITH CPU11 PROCESSOR ROTATION DRIVEN BY CAMCO 80RDM4H20-330 ROTARY INDEXER POWER: 120V 60HZ 3 MANUFACTURED: DECEMBER 2004 NOT WORKING! THIS UNIT IS IN FAIR COSMETIC CONDITION. THERE ARE SCUFFS/SCRATCHES AND ADHESIVE RESIDUES FROM PRIOR USE, INCLUDING ALL THE WAY TO BARE METAL. SOME OF THE PLASTIC WINDOWS ARE CRACKED. THERE ARE A COUPLE OF SCREWS AND A JUMPER THAT LOOK LIKE THEY CAME FROM THE PLC, FLOATING LOOSE IN THE BOTTOM OF THE CONTROL CABINET. THERE IS SOME RUST ON A FEW OF THE FASTENERS. THERE ARE LOTS OF HOLES IN THE SIDES WHERE THINGS WERE PREVIOUSLY MOUNTED. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS SYSTEM IS NOT WORKING. WHEN POWER IS SWITCHED ON, THE PLC POWERS UP BUT THE RESET LIGHT DOES NOT ILLUMINATE. WE WERE NOT ABLE TO GET ANYTHING TO MOVE AT ALL. WE ARE NOT SURE WHAT MAY BE WRONG WITH THIS UNIT. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) CTI TT-30I-4S-B1-0640 PCB TURNTABLE.

208V 3PH 4W +PE 30A 50-60HZ NOAH PRECISION PSC-HQ PSCE R11 50-000003-01 CHILLER CONTROLLER. MANUFACTURER: NOAH PRECISION MODEL: 900-PSCHQ-V1.02 DESCRIPTION: PSCE (900-PSCE-V1.02) A.K.A. VERSATILE POWER P/N 50-000003-01 R6 VOLTAGE: 208VAC NOM. 3-PHASE, 4-WIRE (DELTA) SOURCE FREQUENCY 50/60 HZ SOURCE CURRENT: 30A MAX POWER CONSUMPTION 8.4 KW AMPERE INTERRUPT CAPACITY 5000A TE MAX OUTPUT VOLTAGE 250 VDC TE MAX OUTPUT CURRENT 35A (MAX) PUMP MOTOR OUTPUT VOLTAGE 48 VDC POWER SUPPLY AND PID TEMPERATURE CONTROLLER FOR POU EVOLUTION SYSTEM INPUT POWER REQUIREMENT: 3PHASE 208V 50-60HZ 30A 2-LINE INFORMATION DISPLAY INSTALL UP TO 80 FEET FROM THE 3300 POINT OF USE MODULE

[QUICKDRAW MR OPEN-CENTER SLIP-ROLLER CONVEYOR SYSTEM] CONVEYOR LENGTH: 60" OPEN-CENTER BELT-DRIVEN SLIP-ROLLER EDGE CONVEYOR SLIP ROLLERS ALLOW CONTROLLED ACCUMULATION OF PARTS ESD SAFE T-SLOT MOUNTING RAIL BENEATH CONVEYOR LEFT AND RIGHT SIDE, BOTH MOTORIZED. THIS CONVEYOR IS IN FAIR COSMETIC CONDITION WITH MINOR BLEMISHES FROM PRIOR USE INCLUDING SCUFFS/SCRATCHES AND GRAY RTV RESIDUES ALL OVER. THE T-SLOT MOUNTING RAIL HAS BEEN REMOVED FROM THE BOTTOM OF THE CONVEYOR. NOTE THAT THE COVERS FOR THE MOTORS ARE MISSING SCREWS AND THE COVERS ARE LOOSE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. THIS CONVEYOR WAS REMOVED FROM A DECOMMISSIONED MACHINE. WE DID NOT TEST IT SEPARATELY. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN.

[DRYDEN DE712-AF-5] DE712AF SMALL HEPA AIR FILTER WITH EBM R2S133-AB25-22 BLOWER - MANUFACTURER: DRYDEN ENGINEERING COMPANY, INC. MODEL: DE712-AF-5 AIR FILTRATION MODULE HEPA FILTER WITH CENTRIFUGAL FAN OUTLET: 27X14CM INLET DIAMETER: 10CM SCREENS ON INLET AND OUTLET OVERALL OUTSIDE DIMENSIONS: 32CMW X 31CMD X 21CMH MAINS CONNECTION: IEC-320-C14 PLUG (A POWER CABLE PLUGS INTO THIS) BLOWER: EBM R2S133-AB25-22 MOTORIZED IMPELLER 13.3CM DIAMETER RATED MAXIMUM AIRFLOW: 170CFM THERMALLY PROTECTED POWER: 115V 50/60HZ 45W

[ADJUSTABLE EDGE BELT CONVEYOR] THK+HIWIN LINEAR XY AXES LINEAR GUIDE RAIL RITP ADJUSTABLE-WIDTH EDGE BELT CONVEYOR (18" TO 2" BELT SEPARATION) CONVEYOR LENGTH: 25" CONVEYOR CAN BE PROJECTED UP TO 15" WITH ADJUSTABLE TRAVEL STOPS EFFECTIVE CONVEYOR LENGTH AFTER PROJECTION: APPROXIMATELY 40" LINEAR MOTION PARTS: BOTTOM RAILS: (2) THK SR25 RAILS, 64CM LONG, WITH 4 RECIRCULATING BALL-BEARING BLOCKS BOTTOM ACTUATOR: BIMBA RODLESS AIR CYLINDER TOP RAILS: (2) HIWIN MGN15H RAILS, 55CM LONG, WITH 4 RECIRCULATING BALL BEARING BLOCKS TOP ACTUATOR: STEP MOTOR DRIVING 1/2" SCREW BOTTOM HAS A "HELPER" CYLINDER AT ONE END OF TRAVEL, CAN BE A SHOCK ABSORBER OR ASSIST INITIAL MOTION STRENGTH FOR PROJECTION SWITCHES: OPTICAL SWITCHES DETECT OBJECTS ON CONVEYOR OPTICAL SWITCHES DETECT MAXIMUM/MINIMUM CONVEYOR WIDTH PROXIMITY SWITCHES DETECT ENDS OF PROJECTION TRAVEL HEAVY PLATE ALUMINUM CHASSIS ENCLOSED "E-CHAIN" STYLE WIRE MANAGEMENT ADJUSTABLE-HEIGHT LEVELING FEET EACH CORNER ELECTRONICS ON THE "RIGHT" OUTSIDE DIMENSIONS APPROXIMATELY 27" X 25" X 10", 90LBS. SKU: X10D003 5A-18-03(1)

(1) PROTO 10038 2-3/8-INCH 1.0-INCH DRIVE 6-POINT IMPACT SOCKET 4.05LBS 3-3/8-IN L SPECIFICATIONS: MANUFACTURER: PROTO MODEL: 10038 DESCRIPTION: 1.00" DRIVE 6-POINT IMPACT SOCKET SIZE: 2-3/8" SOCKET DIAMETER: 3-1/2" DRIVE DIAMETER: 2-3/8" LENGTH: 3-3/8" WEIGHT: 4.05LBS

[UNBRANDED] 100E32H BUSHED SPROCKET 32 TEETH WITH DETACHABLE BUSHING TOTAL DIAMETER: 13.5" NUMBER OF TEETH: 32 PITCH: 1.2" DETACHABLE BUSHING BORE SIZE: 3 7/16" CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THIS ITEM HAS MINOR SCUFFS AND SCRAPES FROM PREVIOUS USE. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: THIS ITEM WAS REMOVED FROM A DECOMMISSIONED SETUP. NO TESTING WAS PERFORMED AFTER REMOVAL. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) 100E32H BUSHED SPROCKET 32 TEETH WITH DETACHABLE BUSHING