Industrial Electronic Manufacturing Process Equipment Parts Tools Day 3 of 3 day event

[CELERITY UFC-9861] ANALOG THERMAL MASS FLOW CONTROLLER 30SLM N2 FLOW RANGE - MANUFACTURER: CELERITY MODEL: UFC-9861 CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THE CONTROLLER IS IN GOOD, USED CONDITION WITH MINOR SCUFFS AND SCRATCHES FROM PREVIOUS USE. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: THE CONTROLLER WAS REMOVED FROM A DECOMMISSIONED MACHINE. NO FURTHER TESTING WAS PERFORMED AFTER REMOVAL. THE UNIT DOES NOT INCLUDE A BASE ATTACHMENT. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) CELERITY UFC-9861 ANALOG THERMAL MASS FLOW CONTROLLER 30SLM N2 SPECIFICATIONS: MANUFACTURER: CELERITY MODEL: UFC-9861 ANALOG THERMAL MASS FLOW CONTROLLER FLOW RANGE: 30SLM GAS: N2 (NITROGEN GAS) CONTROL RANGE: 2-100% MAX OPERATING PRESSURE: 620 KPA (90 PSIA) INPUT/OUTPUT SIGNAL: 0-5 VDC LINEARLY PROPORTIONAL TO REQUIRED FLOW WARM-UP PERIOD: 30 MINUTES POWER CONSUMPTION: 5 WATTS MAX MOUNTING: HOS SKU: V12B014 1D-01-02(4) 2LBS - 8IN X 8IN X 4IN

[COGNEX CDC-200] IN-SIGHT MICRO VISION INDUSTRIAL MACHINE VISION CAMERA 26 FPS. MANUFACTURER: COGNEX. MODEL: CDC-200. PART NUMBER: 806-0004-02. MACHINE VISION CAMERA. RESOLUTION: SXGA 1280X1024. FRAME RATE: UP TO 26 FPS. LENS MOUNT: CS-MOUNT OR C-MOUNT WITH ADAPTER. OPTICAL FORMAT: 2/3", 8.58X6.86 MM. PIXEL SIZE: 6.7 UM SQUARE. SATURATION SIGNAL: 60,000 ELECTRONS. MINIMUM SENSITIVITY: 6 LUX @ 26 FPS, F2 LENS. SHUTTER TYPE: GLOBAL. SUB-SAMPLING RATIOS: 2:1. REMOVED FROM A DECOMMISSIONED MACHINE. NO FURTHER TESTING WAS PERFORMED AFTER REMOVAL. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN.

[27] TIG STAR TS53N88XXL #10XXL XXLONG CERAMIC NOZZLE 5/8" CERAMIC TIG WELD CUP NOZZLE #10XXL EXTRA EXTRA LONG 5/8" 16MM

[STANLEY TYPE 15 NO. 3] HAND PLANE W/ CORRUGATED BOTTOM COMPLETE, ORIGINAL. MANUFACTURER: STANLEY. MODEL: TYPE 15. CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THIS PLANE IS IN FAIR COSMETIC CONDITION, WITH FLAKING CHROME ON TOP AND MINOR "SURFACE" RUST ON MOST OF THE PLAIN STEEL SURFACES. A FEW SPOTS HAVE VERY LIGHT PITTING IF YOU WANT TO PICK NITS. THE PAINT LOOKS BLACK AND SHINY IN THE PHOTOS, BECAUSE WE KNOCKED OFF MOST OF THE RUST WITH A WIRE WHEEL AND WIPED HER DOWN WITH LIGHT MACHINE OIL. THE BLADE IS NOT RAZOR-SHARP, BUT NOTHING CATASTROPHIC HAS HAPPENED TO THE EDGE. THE BOTTOM OF THE KNOB HAS A CHIP ON THE SIDE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: EVERYTHING ON THIS TOOL IS IN GOOD MECHANICAL CONDITION. SHARPEN THE BLADE AND TUNE IT, AND SHE'LL BE READY TO WORK! NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED:(1) STANLEY TYPE 15 PLANE. SPECIFICATIONS: MANUFACTURER: STANLEY. TYPE: 15. SIZE: 3. HAND PLANE FOR WOODWORKING. CORRUGATED (NOT SMOOTH) SOLE. WOODEN TOTE AND KNOB. SKU: X52D012 1B-19-02(1) 4LBS - 12IN X 6IN X 6IN

HEAVY-DUTY STEEL 3" SWIVEL / FIXED INDUSTRIAL ROLLING CASTER WHEELS (4) - MANUFACTURER: UNKNOWN MODEL: DOES NOT APPLY CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THE CASTERS ARE IN USED CONDITION WITH SCUFFS, SCRATCHES, AND SOME RESIDUE FROM PREVIOUS USE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THE CASTERS WERE REMOVED FROM DECOMMISSIONED MACHINES. THE WHEELS ROLL AND THE SWIVEL BASE WORKS AS INTENDED. NO FURTHER TESTING WAS PERFORMED AFTER REMOVAL. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (4) INDUSTRIAL TWO STRAIGHT TWO SWIVEL TYPE ROLLING CASTER WHEELS SPECIFICATIONS: MANUFACTURER: UNKNOWN MODEL: DOES NOT APPLY DESCRIPTION: INDUSTRIAL TWO STRAIGHT TWO SWIVEL TYPE ROLLING CASTER WHEELS WHEEL DIAMETER: 3" WHEEL WIDTH: 1 1/8" TOTAL HEIGHT: 3.50" BASE DIMENSIONS: 2.50" X 2" BOLT HOLE WIDTH: 1 7/8"

[USED] PATLITE LME-L SIGNAL TOWER LED 3-STACK LIGHT 24V AC/DC RED, GREEN, AMBER IP20. COMES IN NON-ORIGINAL PACKAGING. THE SIGNAL TOWER IS IN VERY GOOD CONDITION BUT HAS A SMALL PIECE OF BROKEN PLASTIC NEAR THE ALARM AND A SCRATCH ON THE SIDE, AS SHOWN IN THE PHOTOS. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. THIS STACK LIGHT WAS PULLED FROM A WORKING MACHINE THAT WAS BEING DECOMMISSIONED. A BENCHTOP POWER SUPPLY (NOT INCLUDED) WAS USED TO SUPPLY 24VDC TO THE ASSEMBLY AND IT WORKED AS INTENDED. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) PATLITE LME-L 3-MODULE LED SIGNAL TOWER LIGHT SPECIFICATIONS: MANUFACTURER: PATLITE MODEL: LME-L INDUSTRIAL LED SIGNAL TOWER DEGREE OF PROTECTION: IP20 MOUNTING: POLE MOUNTED VOLTAGE: 24V AC/DC POWER: 1.3W PER MODULE COLOR MODULES: (1) RED (1) AMBER/ORANGE (1) GREEN CONSTRUCTION: ABS PLASTIC POLE THREADS: 1" MADE IN JAPAN SKU: Y08B005 4C-02-05(1) 5LBS - 25IN X 8IN X 4IN

INJECTION MOLD BASE WITH PLATES 29-7/16" X 12-7/8" X 13-3/8" NO.1 STEEL - MANUFACTURER: DME MODEL: DOES NOT APPLY CONDITION: USED. THIS MOLD IS IN FAIR COSMETIC CONDITION, WITH LOTS OF SCUFFS/SCRATCHES AND LIGHT SURFACE RUST HERE AND THERE. THE EJECTION PINS ARE GREASY FROM PRIOR USE. PLEASE NOTE: THIS ITEM IS HEAVY, AND WE ARE NOT ABLE TO SEPARATE THE PARTS WITH EQUIPMENT WE HAVE IN-HOUSE. THE PREVIOUS OWNER'S MOLDS ARE CUT INTO THE PLATES, AND THERE MAY BE ROOM TO RECUT FOR YOUR PARTS, OR NOT, WE ARE NOT SURE. WE ARE NOT SURE WHAT EXACT MODEL OR ASSEMBLY NUMBERS ARE INVOLVED HERE. ALL DIMENSIONS ARE APPROXIMATE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS WAS IN SERVICE AT A SHOP THAT CLOSED, AND WE DID NOT TEST SEPARATELY. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) DME 29-7/16" X 13-3/8" X 12-7/8" INJECTION MOLD SPECIFICATIONS: MANUFACTURER: DME PLASTIC INJECTION MOLD OVERALL DIMENSIONS: 29-7/16" (748MM) X 12-7/8" (326MM) X 13-3/8" (340 MM) WITH TOP CLAMP PLATE, SUPPORT PLATE, EJECTOR WITH A AND B PLATES CUT FOR PRIOR OWNER'S MOLD ALL PLATES CHAMFERED ON EDGES CLAMP SLOTS ON BOTH SIDES MATERIAL: DME NO.1 STEEL PART THICKNESSES: TOP CLAMPING PLATE: 35MM A PLATE: 73MM B PLATE: 48MM SUPPORT PLATE: 48MM EJECTOR: 124MM SKU: Y17D003 5I-17-01(1) 1200LBS - 48IN X 40IN X 40IN

[MST 9602-0400] MST 9602-0400 FMK SATELLITE FTT DIGITAL CONTINUOUS GAS MONITORING SYSTEM MANUFACTURER: MST MODEL: 9602-0400 DESCRIPTION: CONTINUOUS GAS MONITORING SYSTEM DISPLAY: DIGITAL 12 - 24 VDC TYPE: CONTINUOUS GAS SENSOR: MODEL: 9602-5300 GAS DETECTION TYPE: CHLORINE, CL2 NOMINAL RANGE: 0 ... 5.00 PPM SKU: X46G016 2D-03-02(2) 4LBS - 8IN X 8IN X 7IN

JH INDUSTRIAL SWIVEL THREADED SHAFT ROLLING CART 4" CASTER WHEELS (4) - MANUFACTURER: JH MODEL: DOES NOT APPLY CONDITION: NEW OTHER. COMES IN NON-ORIGINAL PACKAGING. THE CASTERS ARE IN USED CONDITION WITH SCUFFS, SCRATCHES, AND RESIDUE FROM PREVIOUS USE. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: THE CASTERS WERE REMOVED FROM DECOMMISSIONED MACHINES. THE WHEELS ROLL AND THE SWIVEL BASE WORKS AS INTENDED. NO FURTHER TESTING WAS PERFORMED AFTER REMOVAL. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (4) JH INDUSTRIAL SWIVEL TYPE THREADED SHAFT ROLLING CART CASTER WHEELS SPECIFICATIONS: MANUFACTURER: JH MODEL: DOES NOT APPLY DESCRIPTION: JH INDUSTRIAL SWIVEL TYPE THREADED SHAFT ROLLING CART CASTER WHEELS SWIVEL TYPE WHEEL DIAMETER:4" WHEEL WIDTH: 1.25" TOTAL HEIGHT: 5" SHAFT LENGTH: 1" SHAFT DIAMETER: 3/8"

[INTRALOX] SERIES 1600 FLAT TOP OPEN HINGE CONVEYOR CHAIN 10.01' L X 18" W - MANUFACTURER: INTRALOX MODEL: SERIES 1600 SPECIFICATIONS: MANUFACTURER: INTRALOX MODEL: 1600 SERIES 1600 FLAT TOP OPEN HINGE CONVEYOR CHAIN LENGTH: 10.01' WIDTH: 18" HEIGHT: 10.2 MM PITCH: 1", 25.4 MM OPEN AREA: 0% HINGE STYLE: OPEN DRIVE METHOD: CENTER DRIVEN

[FUJI ELECTRIC PYX4MAY1-120YC] PYX SERIES TEMPERATURE CONTROLLER 100-240VAC 18VA

DME INJECTION MOLD BASE WITH PLATES AND EJECTOR 20" X 17-13/16" X 13.5" STEEL 3 - MANUFACTURER: DME MODEL: DOES NOT APPLY CONDITION: USED. THIS MOLD IS IN FAIR COSMETIC CONDITION, WITH LOTS OF SCUFFS/SCRATCHES AND LIGHT SURFACE RUST HERE AND THERE. THE EJECTION PINS ARE GREASY FROM PRIOR USE. THERE IS RESIDUE FROM COOLANT IN HOLES ON BOTH SIDES PLEASE NOTE: THIS ITEM IS HEAVY, AND WE ARE NOT ABLE TO SEPARATE THE PARTS WITH EQUIPMENT WE HAVE IN-HOUSE. THE PREVIOUS OWNER'S MOLDS ARE CUT INTO THE PLATES, AND THERE MAY BE ROOM TO RECUT FOR YOUR PARTS, OR NOT, WE ARE NOT SURE. WE ARE NOT SURE WHAT EXACT MODEL OR ASSEMBLY NUMBERS ARE INVOLVED HERE. ALL DIMENSIONS ARE APPROXIMATE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS WAS IN SERVICE AT A SHOP THAT CLOSED, AND WE DID NOT TEST SEPARATELY. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) DME 20" X 17-13/16" X 13-7/16" INJECTION MOLD SPECIFICATIONS: MANUFACTURER: DME PLASTIC INJECTION MOLD OVERALL DIMENSIONS: 20" (508MM) X 17-13/16" (453MM) X 13-7/16" (34CM) ALL PLATES CHAMFERED ON EDGES CLAMP SLOTS ON BOTH SIDES MOLD POWER INPUT CONNECTOR HAS 3 ROWS OF PINS MTC12G THERMOCOUPLE CONNECTOR SKU: Y17D007 5G-16-01(1) 1240LBS - 48IN X 40IN X 40IN

[HARRINGTON HOISTS M3-617] 1-1/2-TON MANUAL HAND CHAIN HOIST 3000-LBS. MANUFACTURER: HARRINGTON HOISTS MODEL: M3-617 M3 SERIES CB015 CHAIN LENGTHS: UNKNOWN CAPACITY: 1-1/2-TON OPERATION: MANUAL HAND TYPE: CHAIN HOIST. INCLUDED: (1) HARRINGTON CB015 M3-617 1-1/2-TON MANUAL HAND CHAIN HOIST 3000-LBS. CONDITION: USED. THIS ITEM COMES IN NON-ORIGINAL PACKAGING. IT HAS SCUFFS, SCRATCHES, DINGS, DENTS, AND SURFACE RUST FROM NORMAL USE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS ITEM WAS NOT FULLY TESTED SINCE WE DO NOT HAVE THE PROPER RESOURCES. WE USED THE HOIST TO PICK UP A 240-POUND OBJECT. IT WAS EASILY RAISED AND LOWERED WITH NO PROBLEMS. NO FURTHER TESTING WAS PERFORMED. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN.

[40] SOUTH WELD 105Z61 #7 CERAMIC TIG WELD GAS CUP NOZZLE 7/16" - MANUFACTURER: SOUTH WELD MODEL: 105Z61 DESCRIPTION: CERAMIC TIG WELD GAS CUP NOZZLE #7 7/16" SKU: V02H039 4B-04-05(4) 5LBS - 10IN X 10IN X 6IN

[UNBRANDED] [DOES NOT APPLY] LARGE BLACK INDUSTRIAL MACHINE LEG/BASE 19.125" X 8.125" X 8" ADJUSTABLE SHAFT. MANUFACTURER: UNBRANDED. MODEL: DOES NOT APPLY. INDUSTRIAL MACHINE LEG/BASE HEIGHT FROM BASE: 19.125" WIDTH: 8.125" DEPTH: 8" BASE DIMENSIONS: 11.125"X11"X.60" BASE MOUNTING HOLES: .48" COLOR: BLACK CONSTRUCTION MATERIAL: STEEL THREAD DIAMETER: 1.48" WEIGHT: 91.16 POUNDS, 41.35 KG MAX BOLT EXTRUSION: 7.5" MINIMUM BOLT EXTRUSION: 3.375"

(1) 1.8" HEAVY DUTY OBLONG MASTER LINK ORANGE CHAIN SLING 15-3/4" L X 9-3/4" W. MANUFACTURER: UNKNOWN. MODEL: UNKNOWN. COLOR: ORANGE. LINK DIMENSIONS: 15-3/4" L X 9-3/4" W. WORKING LOAD RATING: UNKNOWN. LINK THICKNESS: 1.8". SKU: S02C001 5F-01-01(2) 32LBS - 18IN X 12IN X 6IN. CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. ITEM HAS SCUFFS AND SCRAPES FROM PREVIOUS USE. THE LINK HAS BEEN REPAINTED ORANGE. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: NO TESTING WAS PERFORMED. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN.

TIG STAR T13N12 #8 CERAMIC GAS CUP NOZZLE 1/2" 13MM (30) - MANUFACTURER: TIG STAR MODEL: T13N12 CONDITION: NEW OTHER. THESE NOZZLES ARE IN A NEW AND UNUSED COSMETIC CONDITION AND COME INDIVIDUALLY PACKAGED IN THE ORIGINAL TIG STAR BOX THAT DOES SHOW SOME SIGNS OF SHELF WEAR AND OCCASIONALLY WRITING ON THE OUTSIDE OF THE BOX. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (30) TIG STAR T13N12 #8 CERAMIC GAS CUP NOZZLE 1/2" 13MM SPECIFICATIONS: MANUFACTURER: TIG STAR MODEL: T13N12 DESCRIPTION: CERAMIC TIG TORCH GAS CUP NOZZLE #8 1/2" 13MM SKU: V04H021 1A-01-01-03(1) 2LBS - 8IN X 8IN X 4IN

[UNBRANDED] 1.5" THICK STEEL TOP 44" X 24" X 39"H BLACK WELDING TABLE LAYOUT BENCH W/ SHELF. THIS TABLE IS IN FAIR COSMETIC CONDITION WITH MINOR BLEMISHES FROM PRIOR USE. THERE ARE A FEW AREAS OF LIGHT SURFACE RUST HERE AND THERE, BUT NOTHING MAJOR. DIMENSIONS ARE APPROXIMATE. THIS TABLE WAS FORMERLY A BASE FOR A PAIR OF VIBRATORY BOWL FEEDERS, WHICH EXPLAINS THE TWO BIG CLEAN AREAS ON TOP. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THE DOORS OPEN EASILY BUT RUB PRETTY HARD IF YOU CLOSE ONE AT A TIME. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) 44 X 24 X 1.5" WELDING TABLE SPECIFICATIONS: MANUFACTURER: UNKNOWN STEEL BENCH/TABLE IDEAL FOR SMALL WELDING PROJECTS! TOP DIMENSIONS, APPROXIMATE: 1125 X 603 X 37 MM (44-1/4" X 23-3/4" X 1-1/2") HEIGHT: 1 METER (CAN BE ADJUSTED HIGHER) TOP IS BOLTED-ON 41" X 19" SHELF ON BOTTOM 3" WELDED-STEEL FRAME PADDED ADJUSTABLE-HEIGHT FEET SOUTHCO HINGES, QUICK-DETACHABLE BOTTOM HAS WIDE-OPENING DOORS WITH LATCHES DOORS ARE VENTILATED T-SLOT ALUMINUM AND DIN RAIL MOUNTING PROVISIONS IN LOWER AREA TOP HAS A FEW THREADED HOLES AROUND THE EDGE HIDE (STORE) YOUR WELDING GEAR IN THE BOTTOM BOLT YOUR FIXTURES ON TOP NOT PRECISION-GROUND-FLAT, JUST "PRETTY FLAT" WORKING SURFACE ABOUT 800LBS. OF STEEL

[NEW] TIGSTAR T598882 WELDING CUP INSULATOR GASKET. THESE CUP GASKETS ARE IN NEW AND UNUSED COSMETIC CONDITION AND COME INDIVIDUALLY SEALED AND PACKAGED IN THE ORIGINAL TIGSTAR PLASTIC BAGS. INCLUDED: (57) TIGSTAR T598882 WELDING CUP INSULATOR GASKET SPECIFICATIONS: MANUFACTURER: TIGSTAR MODEL: T598882 DESCRIPTION: WELDING CUP INSULATOR GASKET FOR USE WITH TIG TORCH SKU: V15H023 1B-18-02(1) 0LBS - 8IN X 8IN X 7IN

TIG STAR TS53N87XL #12XL CERAMIC GAS LENS NOZZLE 3/4" 19MM (20) - MANUFACTURER: TIG STAR MODEL: TS53N87XL CONDITION: NEW OTHER. THESE NOZZLES ARE IN A NEW AND UNUSED COSMETIC CONDITION AND COME INDIVIDUALLY PACKAGED IN THE ORIGINAL TIG STAR BOXES OF 10 THAT DO SHOW SOME SIGNS OF SHELF WEAR AND OCCASIONALLY WRITING ON THE OUTSIDE OF THE BOX. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (20) TIG STAR TS53N87XL #12XL CERAMIC GAS LENS NOZZLE 3/4" 19MM SPECIFICATIONS: MANUFACTURER: TIG STAR MODEL: TS53N87XL DESCRIPTION: CERAMIC TIG WELD GAS LENS CUP NOZZLE #12XL 3/4" 19MM SKU: V02H005 4B-01-02(1) 4LBS - 8IN X 8IN X 7IN

SISIKU HJ-65 INDUSTRIAL SWIVEL TYPE STEEL BASE ROLLING CASTER WHEELS (4) SWIVEL TYPE WHEEL DIAMETER: 2.50" WHEEL WIDTH: 1.50" BASE DIMENSIONS: 4" X 4" BOLT HOLE WIDTH: 3"

(1) HARRINGTON HOISTS & CRANES TCR-2000C2 2-TON PNEUMATIC CHAIN HOIST 60~90PSI 30'-CHAIN MANUFACTURER: HARRINGTON HOISTS & CRANES MODEL: TCR-2000C2 CAPACITY: 2 TON OPERATION: PNEUMATIC CHAIN HOIST 30' CHAIN AIR PRESSURE: 60 ~ 90 PSI 410 ~ 620 KPA

[WRIGHT TOOL 6840] 1-1/4" IMPACT SOCKET 3/4" DRIVE (1) [WRIGHT TOOL 6946] 1-7/16" IMPACT SOCKET 3/4" DRIVE (1) [WRIGHT TOOL 8840] 1-1/4" IMPACT SOCKET 1.0" DRIVE (1) [WRIGHT TOOL 8852] 1-5/8" IMPACT SOCKET 1.0" DRIVE - MANUFACTURER: WRIGHT TOOL MODEL: DOES NOT APPLY CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THESE SOCKETS HAVE SOME DINGS, SCUFFS, AND SCRATCHES, ALONG WITH SOME SPOTS OF RUST AND OTHER MARKINGS EVIDENT FROM NORMAL USE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THESE SOCKETS WERE REMOVED FROM AN ACTIVE WORKING ENVIRONMENT AND WERE NOT TESTED SUBSEQUENT TO THEIR REMOVAL. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. SPECIFICATIONS: MANUFACTURER: WRIGHT TOOL MODEL: 6840 DESCRIPTION: 3/4" DRIVE 6-POINT IMPACT SOCKET SIZE: 1-1/4" MODEL: 6946 DESCRIPTION: 3/4" DRIVE 6-POINT DEEP IMPACT SOCKET SIZE: 1-7/16 MODEL: 8840 DESCRIPTION: 1.00" DRIVE 6-POINT IMPACT SOCKET SIZE: 1-1/4" MODEL: 8852 DESCRIPTION: 1.00" DRIVE 6-POINT IMPACT SOCKET SIZE: 1-5/8" SKU: U47U015 1D-01-02(1) 9LBS - 7IN X 7IN X 7IN

[UNIVERSAL INSTRUMENTS CORPORATION 4906A COMPONENT FEEDER PICK & PLACE] MANUFACTURER: UNIVERSAL INSTRUMENTS CORPORATION MODEL: 4906A DESCRIPTION: COMPONENT FEEDER PICK & PLACE PRODUCT TREE NUMBER: 47923002 EMTF-062 EQUIPMENT NUMBER: 10039264 PRODUCT CODE: 9606A VOLTS: 12 DC / 24 AC AMPS: 1.0 HERTZ: NA PHASE: NA CE: 99 PLANT NUMBER: 11 AIR REQUIRED: 80 PSI CFM: 05 (2) UNIVERSAL INSTRUMENTS CORPORATION 4906A COMPONENT FEEDER PICK & PLACE

(2) INDUSTRIAL 7L100-125 WELDED WHITE STEEL SWIVEL CASTERS 4" WHEELS. MANUFACTURER: UNBRANDED MODEL: 7L100-125 HEAVY DUTY WELDED STEEL BASE MEASUREMENTS: 5" X 3" X 0.25" WHEEL DIAMETER: 4.00". SKU: Q37G011 2N-03-02(1) 13LBS - 12IN X 12IN X 12IN

[191] GEMCOR G-200BH-191 AIRANAUTIC HYDRAULIC RIVET RIVETER/DRILL SYSTEM 3PH PNEUMATIC MANUFACTURER: GEMCOR MODEL: G-200BH-191 GEMCOR S.O.: A-3080 SN: 782 480VAC 60 HZ 3 PHASE OPERATION: HYDRAULIC / ELECTRIC / PNEUMATIC 2700LBS - 70IN X 62IN X 100IN

[SANDVIK COROMANT DCMT32.52 UM 1115] CARBIDE TURNING INSERT (20) - MANUFACTURER: SANDVIK COROMANT MODEL: 5730986 CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THESE CARBIDE INSERTS WERE VERY SLIGHTLY USED AND CAREFULLY INSPECTED FOR FLAWS. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: THESE CARBIDE INSERTS WERE VERY SLIGHTLY USED AND CAREFULLY INSPECTED FOR FLAWS. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (20) SANDVIK COROMANT 5730986 DCMT32.52 UM 1115 CARBIDE TURNING INSERT SPECIFICATIONS: MANUFACTURER: SANDVIK COROMANT MODEL: 5730986 ISO NO: DCMT11T308-UM1115 ANSI NO: DCMT3(2.5)2-UM1115 DESCRIPTION: DCMT32.52 UM 1115 CARBIDE TURNING INSERT INSCRIBED CIRCLE: 0.3750" (9.525MM) LENGTH: 0.4263" (10.83MM) THICKNESS: 0.1563" (3.97MM) CORNER RADIUS: 0.0313" (0.7938MM) CHIP BREAKER: UM HOLE DIAMETER: 0.1732" (4.40MM) COATING: TIAIN/AICR203 SKU: T05U004

[DEPRAG 343-518U] (5) DEPRAG 343-518U IN-LINE PNEUMATIC SCREWDRIVERS 1/4" HEX - PARTS - MANUFACTURER: DEPRAG MODEL: 343-518U PNEUMATIC HANDHELD SCREWDRIVER BIT COMPATIBILITY: 1/4" AIR INLET: NIPPLE, 1/4" MANUALLY ACTUATED DESIGN: STRAIGHT SERIES: MINIMAT ULTRA COLOR: BLACK HIGH-PRECISION REVERSIBLE AS/IS - THE DRIVERS ARE IN HEAVILY USED, DAMAGED CONDITION IN NEED OF REFURBISHMENT. THERE ARE SCUFFS AND SCRATCHES PRESENT, AND THE PRODUCT LABELS ARE MISSING. THESE ARE BEING SOLD AS/IS. THE DRIVERS WERE REMOVED FROM DECOMMISSIONED ENVIRONMENTS. THE DEVICES ARE BEING SOLD AS/IS FOR PARTS OR REPAIR DUE TO THE VARIOUS REPAIR AND CALIBRATION TAGS THE UNITS ARRIVED WITH AND ALSO BY NOT FUNCTIONING WHEN TESTED WITH OUR SHOP AIR. NO FURTHER TESTING WAS PERFORMED. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. SKU: X35B015 1C-02-02(1) 12LBS - 16IN X 8IN X 8IN

AMERICAN METAL WASH EV-100

SANDVIK COROMANT 5736508 K2N123X2 TM1125 6MM CARBIDE GROOVING INSERT (20) - MANUFACTURER: SANDVIK COROMANT MODEL: 5736508 CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THESE CARBIDE INSERTS WERE VERY SLIGHTLY USED AND CAREFULLY INSPECTED FOR FLAWS. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: THESE CARBIDE INSERTS WERE VERY SLIGHTLY USED AND CAREFULLY INSPECTED FOR FLAWS. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (20) SANDVIK COROMANT 5736508 COROCUT K2N123X2 TM1125 6MM CARBIDE GROOVING INSERT SPECIFICATIONS: MANUFACTURER: SANDVIK COROMANT MODEL: 5736508 ISO NO: N123K2-0600-0008-TM1125 DESCRIPTION: COROCUT K2N123X2 TM1125 6MM CARBIDE GROOVING INSERT CUTTING WIDTH: 6MM (0.2362") MAX DEPTH OF CUT: 23MM (0.9060") COATING: UNCOATED CORNER RADIUS: 0.80MM (0.0315") SKU: T04U013 1E-08-02(29) 2LBS - 6IN X 6IN X 4IN

[INGERSOLL RAND L5H1200V] RACHETING LEVER HOIST 6-TON CAPACITY 40' CHAIN - MANUFACTURER: INGERSOLL RAND MODEL: L5H1200V CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THE HOIST SHOWS SIGNS OF HEAVY USE WITH SCUFFS, SCRATCHES, AND CHIPS ON THE PAINT FINISH FROM PREVIOUS USE. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: THE HOIST WAS REMOVED FROM A DECOMMISSIONED ENVIRONMENT. NO FURTHER TESTING WAS PERFORMED AFTER REMOVAL. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) INGERSOLL RAND L5H1200V RACHETING LEVER HOIST 6-TON CAPACITY 40' CHAIN SPECIFICATIONS: MANUFACTURER: INGERSOLL RAND MODEL: L5H1200V RACHETING LEVER HOIST ROUGHNECK CAPACITY: 6 TONS, 12,000 LBS. CHAIN LENGTH: 40' OPERATION: MANUAL SKU: U19B008 5F-01-02(1) 105LBS - 36IN X 25IN X 14IN

[SANDVIK COROMANT] T-MAX P CARBIDE TURNING INSERT VNMG332 S05F (20) - MANUFACTURER: SANDVIK COROMANT MODEL: 5915144 CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THESE CARBIDE INSERTS WERE VERY SLIGHTLY USED AND CAREFULLY INSPECTED FOR FLAWS. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: THESE CARBIDE INSERTS WERE VERY SLIGHTLY USED AND CAREFULLY INSPECTED FOR FLAWS. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (20) SANDVIK COROMANT 5915144 T-MAX P CARBIDE TURNING INSERT VNMG332 SM S05F 1/32" CORNER RADIUS SPECIFICATIONS: MANUFACTURER: SANDVIK COROMANT MODEL: 5915144 ANSI NO: VNMG332-SM S05F ISO NO: VNMG160408-SM S05F DESCRIPTION: T-MAX P CARBIDE TURNING INSERT GRADE: S05F COATING: TICN/AI203/TIN CHIP BREAKER: SM THICKNESS: 3/16" (4.762MM) LENGTH: 0.6539" (16.61MM) CORNER RADIUS: 1/32" (0.03125") (0.80MM) HOLE DIAMETER: 0.1500" (3.81MM) INSCRIBED CIRCLE: 3/8" (0.3750") (9.525MM) SHAPE: DIAMOND SKU: T04U011 1E-15-02(8) 2LBS - 6IN X 6IN X 4IN

(1) TEXAS PNEUMATIC TOOLS T3 15CFM INDUSTRIAL PISTON SCALER 7/8" BORE 3/8" INLET SPECIFICATIONS: MANUFACTURER: TEXAS PNEUMATIC TOOLS INC MODEL: T3 INDUSTRIAL PISTON SCALER AIR: 15 CFM BORE: 7/8" STROKE: 13/16" BPM: 5200 INLET: 3/8" NPT MINIMUM HOSE SIZE: 3/8" MADE IN USA

[LUBCON DUOMAX 160] ELECTRO-MECHANICAL DOUBLE-POINT PRECISE LUBRICATION UNIT. LUBRICANT VOLUME 160 CM3 (2 X 80 CM ). FEED RATE 0.08 CM3 /STROKE. OPERATING TIME INDIVIDUAL, UP TO 36 MONTHS. SUITABLE LUBRICANT OILS GREASE UP TO NLGI CLASS 2. DIMENSIONS (H X W X D) 152 MM X 110 MM X 64.5 MM (5.9 X 4.3 X 2.5). FITTING G 1/8". HOUSING MATERIAL ALUMINUM DIE-CAST. MAXIMUM LENGTH OF TUBE 1.5 M (4.9 FT). RECOMMENDED TUBE DIAMETER 6 MM (OUTER DIAMETER) 4 MM (INNER DIAMETER). AMBIENT OPERATING TEMPERATURE -20 C* UP TO + 70 C -4 F BIS 158 F. MAXIMUM FEED PRESSURE 8 BAR / 116 PSI. PROTECTION CLASS IP68. DRIVE ELECTRO-MECHANICAL.

[30] TIG STAR TS53N87 #12 CERAMIC GAS CUP NOZZLE 3/4" 19MM. MANUFACTURER: TIG STAR MODEL: TS53N87 DESCRIPTION: CERAMIC GAS CUP NOZZLE #12 3/4" 19MM. THESE NOZZLES ARE IN A NEW AND UNUSED COSMETIC CONDITION AND COME INDIVIDUALLY PACKAGED IN THE ORIGINAL TIG STAR BOXES OF 10 THAT DO SHOW SOME SIGNS OF SHELF WEAR AND OCCASIONALLY WRITING ON THE OUTSIDE OF THE BOX. SKU: V04H006 2O-02-02(1) 5LBS - 8IN X 8IN X 7IN

TECHNIWELD 10N47 #7 CERAMIC TIG TORCH CUP NOZZLE 7/16" #7 (17, 18, 26) SKU: V04H010 1A-01-01-03(1) 2LBS - 6IN X 6IN X 4IN

ROACH 40" X 23-1/2" X 3-1/2" CARTON FLOW ROLLER CONVEYOR 1-1/2" DIA (28) - MANUFACTURER: ROACH CONVEYORS MODEL: UNKNOWN CONVEYOR LENGTH: 40" CONVEYOR WIDTH: 23 1/2" CONVEYOR HEIGHT: 2 1/2" TOTAL HEIGHT: 49" ROLLERS LENGTH: 21" NUMBER OF ROLLERS: 13 ROLLER DIAMETER: 1 1/2" GAP BETWEEN ROLLERS: 1 1/2"

EBM-PAPST W2E143-AB15-01 294CFM 6.8" X 6.8" EQUIPMENT FANS 115VAC (2) - MANUFACTURER: EBM-PAPST MODEL: W2E143-AB15-01 CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THE FANS ARE IN GOOD, USED CONDITION WITH SOME SCUFFS AND SCRATCHES FROM PREVIOUS USE. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: THE FANS WERE REMOVED FROM DECOMMISSIONED MACHINES. NO FURTHER TESTING WAS PERFORMED AFTER REMOVAL. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (2) EBM-PAPST W2E143-AB15-01 294CFM 6.8"X6.8" EQUIPMENT FANS 115VAC SPECIFICATIONS: MANUFACTURER: EBM-PAPST MODEL: W2E143-AB15-01 EQUIPMENT FANS SIZE: 6.8" X 6.8" X 2"H FREQUENCY: 60 HZ NOISE LEVEL: 58 DBA POWER OUTPUT: 29W BEARING TYPE: BALL CONFIGURATION: ROUND TYPE: AC FRAME CONSTRUCTION: DIECAST ALUMINUM TERMINATION: TERMINALS VOLTAGE: 115 VAC 3UF SKU: W39B010 1B-11-02(3) 8LBS - 10IN X 10IN X 7IN

(1) 17-1/2" TALL 80 MM SHAFT DIA STEEL 5-1/2" FOOT DIA NON-THREADED LEVELING FOOT. LEVELING MOUNT/PAD WITH 5.5" SWIVEL FOOT. OVERALL HEIGHT: 17.50". SHAFT DIAMETER: 3.15" (80MM). FOOT DIAMETER: 5.50". WEIGHT: 56 LBS. CLAMP BOLT #: SCOB 8.8. CLAMP DIMENSIONS: 7" X 1-5/8" X 2-1/2".

NEW CAST IRON HEAVY DUTY FLOOR LIFT FOR CASTER WHEELS 8.875"H 1.125" LIFT. MANUFACTURER: UNBRANDED. MODEL: DOES NOT APPLY. INDUSTRIAL CASTER FLOOR LIFT. CONSTRUCTION MATERIAL: CAST IRON. FINISH: SILVER COLOR, ZINC FINISH. TOTAL LIFT: 1.125". METHOD OF ACTUATION: SPRING. HEIGHT WITH LIFT NOT ENGAGED: 8.875". HEIGHT WITH LIFT ENGAGED: 10". LIFT BASE DIAMETER: 4", CIRCULAR WITH RUBBER PAD. FIXED BASE DIMENSIONS: 7.25" X 5.5" X 0.533". BOLT SPACING: 5.25" X 3.5". BOLT HOLE DIAMETER: 0.52". WEIGHT: 16.25 LBS.

[FACTRAC] [EDGE-7 PLUS] TOUCH-SCREEN COUNTER 12V - MANUFACTURER: FACTRAC MODEL: EDGE-7 PLUS CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THE DEVICE IS IN USED CONDITION WITH SOME MINOR SCUFFS AND SCRATCHES FROM PREVIOUS USE. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: THE COUNTER WAS POWERED ON WITH 12VDC USING A POWER SUPPLY (INCLUDED) AND THE DEVICE'S TOUCHSCREEN WENT TO A CONTROL SCREEN, AS SHOWN IN THE PHOTOS. THE TOUCHSCREEN RESPONDED NORMALLY TO BUTTON PRESSES WITHOUT ANY ISSUES. WHEN CONNECTED TO THE DISPLAY, THE OPERATOR SWITCH WORKS TO START/STOP THE NUMBER. NO FURTHER TESTING WAS PERFORMED. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) FACTRAC EDGE-7 PLUS ELECTRONIC COUNTER DISPLAY CONTROLLER 12VDC 3A 2000PPM (1) PUSHBUTTON OPERATOR SWITCH (1) POWER ADAPTER SPECIFICATIONS: MANUFACTURER: FACTRAC SERIES: SMARTCOUNT MODEL: EDGE-7 PLUS DESCRIPTION: ELECTRONIC COUNTER DISPLAY CONTROLLER INPUT POWER: 12VDC, 3A SENSOR INPUT: NPN, 3-WIRE, MI2 MAX INPUT RATE: 2000 PULSES PER MINUTE DIMENSIONS: 7.75" X 3.75" X 2.50" THREE OPEN DATA FIELDS, 7 PRELOADED TEMPLATES NO PROGRAMMING REQUIRED CONNECTIONS: (4) USB PORTS, (2) SENSOR INPUT PORTS, (1) ETHERNET PORT, ON/OFF SWITCH SKU: Y36S007 1B-16-03(4) 9LBS - 12IN X 12IN X 12IN

TIG STAR T10N47L #7 LONG CERAMIC NOZZLE 7/16" 11MM (30) MANUFACTURER: TIG STAR MODEL: T10N47L CONDITION: NEW OTHER. THESE NOZZLES ARE IN A NEW AND UNUSED COSMETIC CONDITION AND COME INDIVIDUALLY PACKAGED IN THE ORIGINAL TIG STAR BOXES OF 10 THAT DO SHOW SOME SIGNS OF SHELF WEAR AND OCCASIONALLY WRITING ON THE OUTSIDE OF THE BOX. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (30) TIG STAR T10N47L #7 LONG CERAMIC NOZZLE 7/16" 11MM SPECIFICATIONS: MANUFACTURER: TIG STAR MODEL: T10N47L DESCRIPTION: LONG CERAMIC GAS CUP NOZZLE #7 7/16" 11MM SKU: V02H044 4B-02-04(3) 4LBS - 7IN X 7IN X 7IN

1950 DELTA MILWAUKEE 40-440 SCROLL SAW WITH 24" CUTTING CAPACITY AND 1/3HP WESTINGHOUSE TYPE FJ MOTOR (1725 RPM, 115V @ .2A, 230V @ 3.1A). THIS VINTAGE UNIT IS MISSING PARTS BUT INCLUDES A DRAWER WITH PARTS THAT MAY COMPLETE IT. POWERED ON BUT NOT TESTED UNDER LOAD DUE TO MISSING BLADE AND PARTS. INCLUDES ONE VINTAGE DELTA MILWAUKEE 24" 40-440 SCROLL SAW. SPECIFICATIONS: MANUFACTURER: DELTA MILWAUKEE MODEL: 40-440 DESCRIPTION: SCROLL SAW 24" MOTOR: WESTINGHOUSE TYPE FJ FRAME D145 1/3 HP 1725 RPM 115 V @ .2A 230V @ 3.1A

2011 SPEEDLINE TECHNOLOGIES MPM ACCELA SCREEN PRINTER CONVEYOR 22"X 20" 68"CONV. AS-IS NO PASSWORD. MANUFACTURER: SPEEDLINE MODEL: ACCELA CONDITION: FOR PARTS OR NOT WORKING. THIS SYSTEM IS IN FAIR COSMETIC CONDITION. SEVERAL CORNER PANELS ARE MISSING. A COUPLE OF COVER SCREWS ARE MISSING. THERE IS WEAR AND SCUFFS/SCRATCHES OUTSIDE, ESPECIALLY ON THE OUTSIDE CORNERS. THE RETAINER FOR THE TRACKBALL IN THE KEYBOARD IS MISSING SO THE BALL IS LOOSE. THERE IS A SMALL AMOUNT OF SOLDER PASTE GOO ON THE DISPENSER. OTHER THAN THAT AND SOME DUST, THE INSIDE OF THE MACHINE LOOKS PRETTY CLEAN. THE BOTTOM DOORS DON'T CLOSE ALL THE WAY SHUT. THE STANDALONE TRACKBALL IS MISSING ITS MOUSE. NOTE THERE ARE TWO COMPUTERS WITH THIS UNIT; BOTH BOOT TO MACHINE SOFTWARE AND WE HAVE PASSWORDS FOR NEITHER. PAPERWORK WITH THE SYSTEM INDICATES IT WAS RECEIVING PREVENTATIVE MAINTENANCE UNTIL SOMETIME IN 2020. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS MACHINE IS IN AT-LEAST-PARTIAL WORKING CONDITION. WITHOUT A PASSWORD FOR THE PRINTER SOFTWARE, WE ARE NOT ABLE TO PERFORM THOROUGH TESTING. WE DO NOT HAVE A PASSWORD SO THE MACHINE WAS NOT ABLE TO INITIALIZE. THE ON AND POWER LIGHTS, AS WELL AS THE AMBER STACK TOWER LIGHT ILLUMINATED. THE TRACKBALL BUILD INTO THE KEYBOARD IS STUCK TRYING TO GO UP/LEFT, WE ARE NOT SURE WHY. NO OTHER ERRORS WERE NOTED, NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) SPEEDLINE ACCELA SCREEN PRINTER SPECIFICATIONS: MANUFACTURER: SPEEDLINE TECHNOLOGIES MPM MODEL: ACCELA SCREEN PRINTER MAXIMUM PRINT AREA: 22" X 20" MAXIMUM BOARD SIZE: 22" X 20" MINIMUM BOARD SIZE: 2" X 2" BOARD THICKNESS: 0.152MM TO 12.7MM, UP TO 7KG PRINT SPEED: 6MM TO 305MM /SECOND PRINT STROKE: +/-11 FROM CENTER CYCLE TIME: <5.5 SEC VISION ALIGNMENT REPEATABILITY: +/-12.5 MICRONS 68" CROSSWAYS THROUGH CONVEYOR AUTOMATIC STENCIL CLEANER SOFTWARE RUNS ON WINDOWS COMPUTER POWER: 230V 1PHASE 15A 3.5KVA PLUS COMPRESSED AIR MANUFACTURED: 2011 SKU: X12D011 6-BILR1(1) 4854LBS - 104IN X 76IN X 110IN

[85] SOUTH BEND JOHNSON 80FW-AC PRESS OBI 80-TON 4"-STROKE SHUT-HT:15.5 ADJ:3.5 S/N: 73105 MANUFACTURER: SOUTH BEND JOHNSON PRESSES PRESS: 80FW-AC OBI-80 TONNAGE: 80 STROKE: 4" SHUT HEIGHT: 15-1/2 ADJUSTMENT: 3-1/2 BED AREA, L-R, F-B: 36X24 RAM AREA, L-R, F-B: 16-1/4X13-1/2 MAX. ATTACHMENT WEIGHT: 525 STROKES/MIN VOLTAGE: 230 HERTZ: 60 PHASE: 3 FULL LOAD CURRENT: 30 DISC. SW. INTERRUPT CAP.: 30 AMPS WIRING DIAGRAM NO.: ES2253 RESOLVER BASED PRESS CONTROL SKU: T29L003 SOUTH BEND JOHNSON 80FW-AC OBI 80-TON PRESS 4"-STROKE SHUT-HT:15.5 ADJ:3.5 6-OUTSIDE(1) 14000LBS - 80IN X 82IN X 115IN

[KAMO SEIKO BR85SH-20G-S037] REDUCER BALL SPEED 1/20G RATIO SHAFT DIAMETER: 18MM BORE SIZE: 11MM

COLSON ENCORE SERIES 4 LOCKING SWIVEL 4" HEAVY DUTY CASTER WHEELS (4) MANUFACTURER: COLSON MODEL: 4 DESCRIPTION: COLSON ENCORE LOCKING SWIVEL TYPE HEAVY DUTY CASTER WHEELS SERIES 4 PERFORMANCE WHEEL DIAMETER: 4" WHEEL WIDTH: 1.25" BASE DIMENSIONS: 3.75" X 2.75" TOTAL HEIGHT: 5" BOLT HOLE WIDTH: 3" X 2"

[CLECO PNEUMATIC 1/4" PORT NUT/SCREWDRIVER AIRCRAFT TOOLS] MANUFACTURER: CLECO MODEL: DOES NOT APPLY PNEUMATIC NUT DRIVER/SCREWDRIVERS BIT SIZE: 1/4" PNEUMATIC CONNECTIONS: 0.33" MANUAL ACTIVATION EXHAUST PORT PISTOL GRIP HANDLES DESIGNED FOR AIRCRAFT AND AUTOMOTIVE APPLICATIONS

(1) KISTLER DEPRAG 9039Q01 SCREWDRIVER MANUFACTURER: KISTLER DEPRAG MODEL: 9039Q01 OPERATION: PNEUMATIC SKU: T01L004 1E-01-02(2) 5LBS - 14IN X 8IN X 4IN

HANKE CRIMP-TECHNIK 963-312 CRIMP MACHINE AUTOMATIC CRIMPPRESS CRIMPMATIC -PARTS - MANUFACTURER: HANKE MODEL: 963-312 CONDITION: FOR PARTS OR NOT WORKING. THIS ITEM COMES IN NON-ORIGINAL PACKAGING. IT HAS SCUFFS AND SCRATCHES FROM NORMAL USE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS ITEM WAS NOT FULLY TESTED SINCE WE DO NOT HAVE THE PROPER RESOURCES. IT MAY HAVE ISSUE(S) SINCE WE ARE NOT FAMILIAR WITH THIS TYPE OF EQUIPMENT. WHEN THE POWER WAS SWITCHED ON IT CAME UP IN STANDBY MODE. WHEN THE OK BUTTON WAS DEPRESSED IT ASKED FOR A PASSWORD. WE THEN ENTERED H8 (FROM THE MANUAL) AND THEN TOGGLED THROUGH THE VARIOUS PARAMETERS AS SEEN IN THE IMAGES. WE COULD NOT GET IT OUT OF STANDBY MODE TO RUN IT, THOUGH WE DID RUN THE MOTOR(CRIMP TOOL) DIRECTLY, BYPASSING THE CONTROL UNIT WHICH IS SHOWN IN THE VIDEO. NO FURTHER TESTING WAS PERFORMED. **** WATCH VIDEO **** NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) HANKE CRIMP-TECHNIK 963-312 CRIMP MACHINE (1) HANKE CRIMP-TECHNIK OPERATING INSTRUCTIONS CRIMPMATIC 963 (1) POWER ADAPTER SPECIFICATIONS: MANUFACTURER: HANKE MODEL: 963-312 230VAC 6.3 AMPS 50/60 HZ TOOL #: 951 04 05 11 1 - POWER ADAPTER (STEP-UP: 120V IN TO 230V OUT) 1 - HANKE CRIMP-TECHNIK OPERATING INSTRUCTIONS CRIMPMATIC 963 SKU: U11L007 YOUTUBE VIDEO WILL OPEN IN A NEW WINDOW USING THE EBAY APP? PASTE LINK INTO A BROWSER WINDOW: [ISDNTEKVIDEO] 5F-05-01(1) 335LBS - 48IN X 40IN X 32IN