Industrial Electronic Manufacturing Process Equipment Parts Tools Day 3 of 3 day event

[1] INDUSTRIAL T-SLOT MOTORIZED BELT CONVEYOR 3PH 460V ALUMINUM INDUCTION MOTOR .3HP SPECIFICATIONS: MANUFACTURER: UNBRANDED MODEL: UNKNOWN MOTOR: MANUFACTURER: DUTCHI MOTORS ALUMINUM 3 PHASE INDUCTION MOTOR 60 HZ 1620 RPM 0.22 KW 480V/460V/440V REDUCER: NMRV 130 MOTOVARIO RATIO: 7.5 BELT: LENGTH (TOP ONLY): 74" WIDTH: 26-3/4" TYPE: GLUED SEAM (NOT STAPLE) HEIGHT (FROM GROUND TO CENTER OF ROLLER): HIGH END: 39" LOW END: 12-1/2" SKU: W22L004 5A-07-04(1) 240LBS - 78IN X 40IN X 49IN

ASSEMBLEON PA1118/00 COMPACT PLACEMENT ROBOT AXIS CPR - PARTS - MANUFACTURER: ASSEMBLEON MODEL: PA1118 CONDITION: FOR PARTS OR NOT WORKING. COMES IN NON-ORIGINAL PACKAGING. THIS AXIS IS IN FAIR COSMETIC CONDITION. THERE IS LOTS OF LIGHT RUST AND OTHER CORROSION IN VARIOUS PLACES INCLUDING ON THE MOVING PARTS. SOMEONE WROTE "X" IN A COUPLE OF PLACES IN MAGIC MARKER ON TOP. THIS IS BEING LISTED AS/IS. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: WE ARE NOT ABLE TO TEST THIS ITEM. THIS IS BEING LISTED AS/IS. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) ASSEMBLEON PA1118 ROBOT AXIS SPECIFICATIONS: MANUFACTURER: ASSEMBLEON TYPE: PA1118/00 NC: 9466 011 18001 COMPACT PLACEMENT ROBOT AXIS OTHER VISIBLE MARKINGS: NC 4022 522 1544 MICROE M1507H-40 4022 555 0091.3 4022 555 0914 MSSI 055G045E048C0FN0F2100 ERO 1470 1000 69S12-30 4022 555 0092.5 4022 555 0093. SKU: U16D002 5J-03-02(1) 230LBS - 80IN X 36IN X 23IN

UNBRANDED CHD-16250-8-I 1-5/8" UNS THREAD 3-1/8"-HEX CARBON STEEL RIGHT-HAND RETHREADING DIE THREAD SIZE: 1-5/8"-8 HEX SIZE: 3-1/8" MATERIAL: CARBON STEEL THREAD DIRECTION: RIGHT HAND THREAD STANDARD: UNS THICKNESS: 1"

(3) GOODYEAR HY-T COGGED WEDGE MATCHMAKER 5VX950 INDUSTRIAL V-BELTS 95" SPECIFICATIONS: MANUFACTURER: GOODYEAR MODEL: 5VX950 COGGED WEDGE V BELT OUTSIDE CIRCUMFERENCE: 95" TOP WIDTH: .63" BELT DEPTH: .55" BELT SECTION: 5VX FIBER LOADED COGGED CONSTRUCTION PROVIDES OPTIMUM FLEXIBILITY AND MINIMIZES HEAT BUILD UP MEETS RMA STANDARDS FOR STATIC CONDUCTIVITY, OIL, AND HEAT RESISTANCE

[TELEMECANIQUE XVA LC3 SAFETY SIGNAL TOWERS] RED, ORANGE, GREEN 8.5" (2) - MANUFACTURER: TELEMECANIQUE MODEL: XVA LC3 CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THE UNITS ARE IN GOOD, USED CONDITION WITH SOME SCUFFS AND SCRATCHES FROM PREVIOUS USE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THE UNITS WERE REMOVED FROM DECOMMISSIONED ENVIRONMENTS. NO FURTHER TESTING WAS PERFORMED AFTER REMOVAL. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (2) TELEMECANIQUE XVA LC3 SAFETY SIGNAL TOWERS (2)RED, ORANGE, GREEN 8.5" SPECIFICATIONS: MANUFACTURER: TELEMECANIQUE MODEL: DOES NOT APPLY INDUSTRIAL SAFETY SIGNAL TOWERS LENGTH OF HOUSING: 8.5" TOTAL LENGTH: 11.5", 23.5" DIAMETER: 70MM MOUNTING DIAMETER: 2.75" COLORS: (2) RED, ORANGE, GREEN OUTPUT: 7 WATTS VOLTAGE: 240V ENCLOSURE TYPE 12 UL LISTED MADE IN USA, SPAIN SKU: W24B016 1E-06-02(1) 5LBS - 29IN X 8IN X 8IN

(1) NEW PATLITE SE402-D 24VDC 4-MODULE INDUSTRIAL LED SIGNAL TOWER 57MM DIAMETER SPECIFICATIONS: MANUFACTURER: PATLITE MODEL: SE402-D INDUSTRIAL LED SIGNAL TOWER DIAMETER: 57 MM VOLTAGE: 24 VDC 4-MODULES DEGREE OF PROTECTION: IP 23 CONTINUOUS FUNCTION

(4) PENN-ELCOM 100MM X 36MM HEAVY DUTY INDUSTRIAL CASTER WHEELS - GALVANIZED STEEL SWIVEL CASTER WHEELS MANUFACTURER: PENN-ELCOM MODEL: UNBRANDED HEAVY DUTY SWIVEL CASTERS MATERIAL: GALVANIZED STEEL BASE LENGTH: 4" BASE WIDTH: 3" WHEEL SIZE: 100MM X 36MM WHEEL MATERIAL: RUBBER SWIVEL DESIGN: BALL BEARING CARRYING WEIGHT PER WHEEL: 440 POUNDS, 200 KG. CASTER WHEELS ARE IN USED CONDITION WITH SCUFFS, SCRATCHES, AND SOME DENTS ON THE WHEELS. THE WHEELS SPIN AND THE SWIVEL MECHANISM WORKS AS INTENDED WITH NO OBSTRUCTION.

BEST WELDS 2" X 4.25" HARDENED GLASS FILTER PLATE (50) - DESCRIPTION: HARDENED GLASS LENS WELDING FILTER PLATE 2" X 4.25" (50.8MM X 108MM) SHADE 8

[ANCHOR BRAND 10N47L #7 LONG ALUMINA NOZZLE 7/16" (20)] - MANUFACTURER: ANCHOR BRAND MODEL: 10N47L CONDITION: NEW OTHER. THESE NOZZLES ARE IN A NEW AND UNUSED COSMETIC CONDITION AND COME INDIVIDUALLY PACKAGED IN THE ORIGINAL ANCHOR BRAND BOXES OF 10 THAT DO SHOW SOME SIGNS OF SHELF WEAR AND WRITING ON THE OUTSIDE OF THE BOX. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (20) ANCHOR BRAND 10N47L #7 LONG ALUMINA NOZZLE 7/16" SPECIFICATIONS: MANUFACTURER: ANCHOR BRAND MODEL: 10N47L DESCRIPTION: LONG ALUMINA CERAMIC GAS CUP NOZZLE SKU: V04H014 1A-01-01-03(1) 3LBS - 8IN X 8IN X 4IN

[DEPRAG 343-328U] DEPRAG 343-328U 1/4" DRIVE INLINE AIR PNEUMATIC SCREWDRIVERS - FOR PARTS OR NOT WORKING. COMES IN NON-ORIGINAL PACKAGING. THE SCREWDRIVERS ARE IN HEAVILY USED CONDITION WITH SOME SCUFFS AND SCRATCHES. THE ITEMS ARRIVED WITH REPAIR STICKERS, INDICATING NEED FOR REFURBISHMENT. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THE DRIVERS ARE IN HEAVILY USED CONDITION WITH SCUFFS AND SCRATCHES FROM PREVIOUS USE. THE DEVICES ARE BEING SOLD AS/IS FOR PARTS OR REPAIR DUE TO THE VARIOUS REPAIR TAGS THE ITEMS ARRIVED WITH, INDICATING A NEED FOR REFURBISHMENT. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (4) DEPRAG 343-328U 1/4" DRIVE INLINE AIR PNEUMATIC SCREWDRIVERS AS/IS SPECIFICATIONS: MANUFACTURER: DEPRAG MODEL: 343-328U AIR PENUMATIC SCREWDRIVER PUSH-TO-START MEDIUM: COMPRESSED AIR TOOL LENGTH: 10.5" TOOL DIAMETER: 1.25" X 1.25" INLET: 0.35" OUTER DIAMETER DRIVE SIZE: 1/4" MINIMAT ULTRA SERIES PUSHBUTTON START SKU: X34B001 1D-09-02(1) 10LBS - 16IN X 8IN X 8IN

[FLEETGUARD AF25708] AIR FILTER PRIMARY ELEMENT OVERALL HEIGHT: 20.54" OVERALL OUTER DIAMETER: 11.02" INNER DIAMETER: 8.10" COMPATIBLE WITH CUMMINS C450 EQUIVALENTS: FLEETGUARD AF2570800, INLINE FFGAF25708, FFG-AF25708

[CAMCO] ROLLER DIAL ROTARY INDEX DRIVE W/ [BALDOR] 1/3HP MOTOR AND [IMC] XX5282 GEAR - MANUFACTURER: CAMCO MODEL: 80RDM4H20-330 CONDITION: USED. THIS INDEX DRIVE, MOTOR, AND GEAR REDUCER ARE IN GOOD COSMETIC CONDITION WITH SCUFFS AND SCRATCHES FROM REGULAR INDUSTRIAL USE AND COME IN NON-ORIGINAL PACKAGING. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS INDEX DRIVE, MOTOR, AND GEAR REDUCER WERE REMOVED FROM DECOMMISSIONED EQUIPMENT AND HAVE NOT BEEN TESTED. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) CAMCO 80RDM4H20-330 ROLLER DIAL ROTARY INDEX DRIVE (1) BALDOR 25A0237-034 ELECTRIC MOTOR (1) INDUSTRIAL MOTION CONTROL XX5282 R180 GEAR REDUCER SPECIFICATIONS: MANUFACTURER: CAMCO / BALDOR / INDUSTRIAL MOTION CONTROL MODEL: 80RDM4H20-330 / 25A0237-034 / XX5282 DESCRIPTION: ROLLER DIAL ROTARY INDEX DRIVE W/ MOTOR AND GEAR REDUCER CAMCO 80RDM4H20-330 ROLLER DIAL ROTARY INDEX DRIVE HEIGHT TO MOUNTING SURFACE (IN) 4.3 MAXIMUM TORQUE (IN-LB) 1363.0 OUTPUT_RADIAL_CAPACTIRY_LB 7558.0 HEIGHT TO MOUNTING_SURFACE 4.3307086614 MOUNTING SURFACE DIAMETER (IN) 4.9 CENTER THRU HOLE DIAMETER (IN) 2.76 MAXIMUM_TORQUE_INLB 1363.0 CENTER_THRU_HOLE_DIAMETER 2.76 INTERNAL INERTIA (LB-IN2) 28.0 CENTER_DISTANCE 3.1496062992 MAXIMUM INERTIA LOAD AT 30 INDEXES PER MINUTE (LB-IN2 X 1000) 104.0 MAXIMUM INERTIA LOAD AT 60 INDEXES PER MINUTE (LB-IN2 X 1000) 23.0 OUTPUT_THRUST_AXIAL_CAPACITY_LB 1885.0 OUTPUT_OVERTURNING_MOMENT_CAPACITY_INLB B10_TORQUE_CAPACITY_INLB 1451.0 MOUNTING_SURFACE_DIAMETER 4.9212598425 B10 TORQUE CAPACITY (IN-LB) 1451.0 CENTER DISTANCE (IN) 3.1 OUTPUT OVERTURNING MOMENT CAPACITY (IN-LB) 1885.0 OUTPUT RADIAL CAPACITY (LB) 7558.0 OUTPUT THRUST/AXIAL CAPACITY (LB) 1885.0 INTERNAL INERTIA (LB-IN2) 28.0 SMART NUMBER MOTION SPEC C INDEX PERIOD (DEG) 330.0 OUTPUT FLANGE FAMILY RDM DRIVE PACKAGE R180 REDUCER AND 1/3 HP AC MOTOR (220 /440V) CONNECTOR R180 REDUCER AND 1/3 HP AC MOTOR (220 /440V) MOTION MSC.33 PRODUCT SERIES 80RDM ACCURACY (ARCSEC) 44 STOPS 4.0 BASE MODEL 80RDM4H20-330 PUBLISHEDDATE 1674767483179 SERIES 80RDM PRODUCT FUNCTION ROTARY POSITIONING PRODUCT TYPE FLANGE OUTPUT REPEATABILITY (ARCSEC) 11 BALDOR 25A0237-034 ELECTRIC MOTOR 1/3HP TENV ENCL 1900RPM 071G FRAME TYPE PM2532P 90V 3.5A INSL. F CONT. SUPPLY K INDUSTRIAL MOTION CONTROL XX5282 GEAR REDUCER SIZE R180 RATIO 10 SKU: X09H016 1D-09-01(1) 47LBS - 22IN X 15IN X 11IN

[CLECO 44RSAPT7] PNEUMATIC TRIGGER START PISTOL GRIP 1/4 AIR SCREWDRIVER/NUTRUNNER - MANUFACTURER: AIMCO URYU MODEL: 44RSAPT7 CONDITION: USED. COMES IN NON ORIGINAL PACKAGING. THE SCREWDRIVER HAS SOME WEAR AND TEAR FROM PREVIOUS USE. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: OUR TESTS INCLUDED PLUGGING IN THE AIR TOOL AND AN AIR LINE HOSE. THE SCREWDRIVER WORKED SMOOTHLY IN THE FORWARD AND REVERSE POSITIONS. NO FURTHER TESTING WAS PERFORMED. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) CLECO 44RSAPT7 AIR PNEUMATIC PISTOL GRIP SCREWDRIVER/NUTRUNNER SPECIFICATIONS: MANUFACTURER: CLECO MODEL: 44RSAPT7 1/4" HEX PISTOL GRIP STYLE REVERSIBLE TRIGGER PUSH TO START REVERSE PUSH BUTTON SKU: Q12U023 1A-02-02-04(2) 4LBS - 10IN X 10IN X 4IN

[WRIGHT ACCO] SPEEDWAY ELECTRIC CABLE TROLLEY HOIST 4-HP 4000-LB 3-PH S/N: H-74-4437A-4 CAPACITY: 4000 LBS. SPEEDWAY 3 PHASE 60 HZ FRAME: AEO-204 TYPE: P000 4 HP 1800 RPM V: 230 / 460 A: 11.8 / 5.9 TIME RATING: 30 MIN. THIS HOIST IS AS-IS, FOR PARTS OR REPAIR. WHEN POWER WAS APPLIED IT JUST HUMMED. THE LARGE THREE BLACK FUSES GOT VERY WARM AND THE UP/DOWN HAND-HELD CONTROLLER DIDN'T MOVE THE CABLE IN EITHER DIRECTION. THE CABLE IS VERY TIGHT. WE ARE NOT SURE IF THE CABLE ASSEMBLY IS LOCKED UP OR IF IT IS AN ELECTRICAL ISSUE. SINCE THE CABLE IS SUPER TAUT WE DO NOT KNOW THE LENGTH OF IT. ONE OF THE WIRES INTERNALLY IS DISCONNECTED AND UNLABELED SO WE ARE NOT SURE IF OR WHERE IT SHOULD GO. NO FURTHER TESTING WAS PERFORMED. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN.

[UNBRANDED] AUTO-REWIND 24" PNEUMATIC AIR HOSE REEL ON HEAVY-DUTY STEEL TRAILER/CART. PORTABLE HOSE REEL CART 24" HOSE REEL METAL FAIRLEAD ROLLERS HEAVY AUTOMATIC RETRACTING MECHANISM MOUNTED ON A SMALL STAND (NOT WELDED TO THE CART) HELD FROM FALLING OVER BY NYLON STRAPS 270-001 CAST INTO PART OF THE REEL MECHANISM STEEL CART DRAWBAR CAN BE HAND-DRAWN OR HITCHED TO A TOW VEHICLE TRAILER BALL ON BACK END FOR HITCHING A LITTLE TOY TRAIN OR WHATEVER DRAWBAR CONTROLS TWO STEERING WHEELS BACK END WHEELS ONLY ROLL STRAIGHT R&K 9A ALUMINUM WHEELS WITH RED TYRES FOLD-DOWN DOORS BOTH SIDES OF CART HAVE LATCHES TO HOLD SHUT DRAW BAR HAS LATCH TO HOLD IT UP OVERALL DIMENSIONS AS SHOWN, APPROXIMATE: 53" LONG, 41" WIDE, 45" HIGH DIMENSIONS OF INTERIOR CART FLOOR, APPROXIMATE: 39" WIDE, 28" LONG, WALLS 4" TALL NOT FOR PULLING BEHIND AN AUTOMOBILE ON THE STREET! SKU: V24D015 5A-27-03(1) 570LBS - 61IN X 49IN X 53IN

[9'] TGW 1198354 108"X21" POWERED ROLLER/BELT CONVEYOR WITH 3 SEPARATE DRIVEN SECTIONS. MANUFACTURER: TGW, MODEL: 1198354. THIS CONVEYOR IS IN FAIR COSMETIC CONDITION WITH MINOR SCUFFS/SCRATCHES/RESIDUES AND REMNANTS OF PAPER ADHESIVE LABELS ON THE OUTSIDE OF THE FRAME. THE BELTS ARE DARK/FADED BUT STILL GOOD. THE CONVEYOR IS IN GOOD WORKING CONDITION. WHEN POWER IS APPLIED, THE BELTS ALL TURN UNTIL SOMETHING OBSTRUCTS THE SENSORS. UNITS REVERSED AS EXPECTED WHEN TESTED WITH APPROPRIATE CONNECTION TO DIRECTION INPUT. THERE IS A GRUMBLE/GROWLING NOISE FROM THE CONVEYORS, THE CAUSE OF WHICH IS UNKNOWN. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) TGW 1198354 108" POWERED CONVEYOR. SPECIFICATIONS: MANUFACTURER: TGW, ITEM: 1198354, DESCRIPTION TEXT: BED,ITR-22BF-HB-CZ-FWB-36Z-RH-9'0"-FE60-3MR MOTORIZED ROLLER CONVEYOR WITH BELTS OVER ROLLERS. LENGTH: 9 FEET OVERALL, (3) 3' INDIVIDUAL BELTED SECTIONS. WIDTH: 21" BELT, 22" INSIDE FRAME, 25.5" OUTSIDE FRAME. HEIGHT: 34" TO BELT TOP (ADJUSTABLE). POWER: 24VDC. FEATURES: (3) POWERED ROLLERS, (3) PRODUCT SENSORS, EACH SECTION CAN BE INDIVIDUALLY CONTROLLED, ANY SEGMENT CAN BE MADE A ZERO-PRESSURE ZONE, CAN BE MADE TO RUN ON DEMAND FOR LESS NOISE, WEAR, AND ENERGY CONSUMPTION, REVERSIBLE, LOW VOLTAGE FOR SAFETY, SOFT START/STOP IMPARTS LOW G-FORCES TO PRODUCTS, VARIABLE SPEED. SKU: W33D003.

CLECO 8RSCHPT-10BQ PNEUMATIC PISTOL GRIP 1/4" AIR DRIVER SCREWDRIVER/NUTRUNNER - MANUFACTURER: CLECO MODEL: 8RSCHPT-10BQ 1/4" HEX QUICK CHANGE CHUCK PISTOL GRIP STYLE SLIDING KNOB REVERSE REVERSIBLE TRIGGER PUSH TO START

USED OZAT 9523 1-7/16-INCH 6-POINT #5 SPLINE DRIVE IMPACT SOCKET 2.40LBS 77MM LENGTH. COMES IN NON-ORIGINAL PACKAGING. THIS SOCKET HAS SOME DINGS, SCUFFS, AND SCRATCHES, ALONG WITH SOME SPOTS OF RUST AND OTHER MARKINGS EVIDENT FROM NORMAL USE. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). THIS SOCKET WAS REMOVED FROM AN ACTIVE WORKING ENVIRONMENT AND WAS NOT TESTED SUBSEQUENT TO ITS REMOVAL. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) OZAT 9523 1-7/16-INCH 6-POINT #5 SPLINE DRIVE IMPACT SOCKET 2.40LBS 77MM LENGTH SPECIFICATIONS: MANUFACTURER: OZAT MODEL: 9523 DESCRIPTION: 6-POINT #5 SPLINE DRIVE IMPACT SOCKET SIZE: 1-7/16" LENGTH: 77MM 3.03" SOCKET DIAMETER: 63MM 2.48" DRIVE DIAMETER: 60MM 2.36" WEIGHT: 2.40LB

[EBM W2S130-AA25-51] THERMALLY PROTECTED COOLING FAN, 115VAC 50/60HZ 41/38W - MANUFACTURER: EBM MODEL: W2S130-AA25-51 CONDITION: USED. THIS ITEM COMES IN NON-ORIGINAL PACKAGING. IT DOES HAVE SOME SURFACE BLEMISHES, BUT NO EVIDENCE OF ANY MAJOR DAMAGE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS ITEM WAS PULLED FROM A FULLY FUNCTIONING ENVIRONMENT, BUT HAS NOT BEEN TESTED BY US BECAUSE OF A LACK OF ADEQUATE TESTING EQUIPMENT. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) EBM W2S130-AA25-71 BALL BEARINGS AC COOLING FAN SPECIFICATIONS: MANUFACTURER: EBM MODEL: W2S130-AA25-71 AC COOLING FAN VOLTAGE: 115V 50/60HZ WATTS: 41 / 38W THERMALLY PROTECTIVE BALL BEARINGS

RAYMOND 740 R35TT ELECTRIC NARROW AISLE SINGLE REACH FORKLIFT LIFT TRUCK W/ BATTERY - MANUFACTURER: RAYMOND MODEL: 740 R35TT CONDITION: USED. THIS FORKLIFT IS IN FAIR COSMETIC CONDITION WITH LOTS OF SCUFFS/SCRATCHES FROM PRIOR USE ALL OVER, ESPECIALLY ON THE BACK CORNERS. THE HOSES ON THE MAST HAVE CRACKS ON THEIR OUTER JACKETS, AND THERE IS A SPOT WHERE THE JACKET IS TORN (SHOWN). THE CHAINS AND TRACKS HAVE LOTS OF GREASE RESIDUE. THE BATTERY IS UNDER-RATED FOR THIS UNIT AND HAS CORROSION BUILDUP ON TOP. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS TRUCK IS IN GOOD WORKING CONDITION. EVERYTHING WORKS AS IT SHOULD. WE CALLED A RAYMOND REPRESENTATIVE TO FIX ANY PROBLEMS THEY FOUND. THEY REPLACED SOME SEALS AND A FILTER, REPAIRED SOME WIRING, REPLACED THE REACH DRIVE TIRE ASSEMBLY, REPLACED ALL FOUR LOAD WHEELS, AND REPLACED A CASTER WHEEL. THE BATTERY IS AGING; IT IS ABLE TO HOLD A CHARGE AND DO WORK, BUT WE CANNOT GUARANTEE BATTERY LIFE. OUR WAREHOUSE IS NOT TALL ENOUGH TO REACH MAXIMUM LIFT ON THE MAST; WE WERE ONLY ABLE TO GET THE FORKS UP TO 18 FEET OFF THE DECK BEFORE WE ALMOST HIT OUR CEILING (BUT IT DOES LIFT AT LEAST THAT HIGH). PLEASE NOTE: THERE ARE A COUPLE OF SPOTS (ONE FRONT, ONE BACK) WHERE THIS UNIT LEAVES A SPOT OF OIL AFTER SITTING FOR A WHILE. WE CAN'T FIND WHERE SHE'S LEAKING. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) RAYMOND MODEL 740R35TT FORKLIFT (1) KEY (2) OWNER MANUALS SPECIFICATIONS: MANUFACTURER: RAYMOND MODEL: 740 R35TT MAXIMUM CAPACITY: 3500 LBS. WIDTH: 42" FORK LENGTH: 42" THREE-STAGE LIFTING MAST SINGLE STAGE REACH WITH SIDE SHIFT DIGITAL READOUT SHOWS HEIGHT OF FORKS (IN INCHES) ABOVE FIRST STAGE SECONDARY F/R CONTROL HANDLE AT REAR FOR MAXIMUM VISIBILITY AND COMFORT TRUCK RATED WEIGHT WITH MAXIMUM BATTERY: 7958 LBS. (5658 WITHOUT BATTERY) BATTERY RATINGS: 36 VOLTS 16.25" WIDE 2000 TO 2300 LBS. 840 A.H. MAXIMUM (750AH INSTALLED) HOUR RATE: 6 HRS SKU: X09D006 5B-01-01(1) 9999LBS - 999IN X 999IN X 999IN

(12) SGS 32612 SOLID CARBIDE V-CARB 55CR 5-FLUTE FINISHER CORNER RADIUS SPECIFICATIONS: MANUFACTURER: SGS MODEL: 32612 DESCRIPTION: SOLID CARBIDE 5-FLUTE FINISHER AND SEMI-FINISHER CORNER RADIUS FRACTIONAL BIT FLUTES: 5 CUTTING DIAMETER: 7/32" LENGTH OF CUT: 3/8 OVERALL LENGTH: 2 SHANK DIAMETER: 1/4 RAKE ANGLE: POSITIVE CORNER RADIUS: .015 COATING: TI-NAMITE-A (AITIN) SKU: S50U016 1C-02-03(37) 2LBS - 6IN X 6IN X 4IN

(7) WIRE ROPE SLINGS, 3/16" X 35", 1-3/8" EYES, 7X19 STRAND CORE, STAINLESS STEEL WIRE ROPE SLINGS, 3/16" X 35", 7 X 19 STRAND CORE, 1-3/8" EYES, 304 SS MATERIAL: 304 STAINLESS STEEL CONFIGURATION: EYE & EYE EYE LOOP SIZE: 1-3/8"

1994 NEFF 2-TON 3PH HYDRAULIC PRESS SAFETY-LIGHT-CURTAINS ADJ-PRESS/SPEED 7"-TRAVEL X S/N: P9978. FOR PARTS OR NOT WORKING. THIS ITEM COMES IN NON-ORIGINAL PACKAGING. IT HAS SCUFFS, SCRATCHES, SURFACE RUST, AND GREASE RESIDUE FROM NORMAL USE. THIS PRESS HAS AN ISSUE STARTING AND CONTINUING TO RUN. IT IS VERY INTERMITTENT AND MAY ONLY RUN ONCE OR TWICE A DAY WHILE TRYING TO START IT THROUGHOUT THE DAY. WHEN IT DOES RUN IT ONLY LASTS FOR A FEW MINUTES. WHEN IT DOES RUN THE FAULT DISPLAY (CINCINNATI ELECTROSYSTEMS, MODEL: 4161, 7-SEGMENT PANEL DISPLAY) ON THE LEFT ORANGE ELECTRICAL BOX SHOWS ALL ZEROS AND THE ALLEN-BRADLEY PROGRAMMABLE CONTROLLER (MODEL: SLC 500) IN THE RIGHT SIDE ORANGE ELECTRICAL BOX HAS ITS POWER LED ON. THE LAST TIME IT RAN I WAS ABLE TO MANEUVER THE RAM UP AND DOWN BY USING EITHER THE LEFT OR RIGHT SIDE FINGER SENSOR IN EITHER THE RUN OR JOG MODE. I WAS ABLE TO DO IT APPROXIMATELY 30 TIMES IN A TWO-MINUTE TIME FRAME, THEN IT WOULD STOP FUNCTIONING AND THE DISPLAY OF ALL 0'S AND THE ALLEN-BRADLEY POWER LED WOULD BOTH SHUT-OFF. ALL THE FUSES AND RELAYS SEEM TO BE WORKING PROPERLY. DURING THAT RUN, IF AT ANY TIME THE LIGHT CURTAIN WAS CROSSED THE RAM WOULD STOP INDICATING THAT THE SAFETY CURTAIN WAS WORKING CORRECTLY. THE PRESSURE GAUGE IS BAD AND WILL HAVE TO BE REPLACED. WE WERE NOT ABLE TO TEST THE PRESSURE OR SPEED ADJUSTMENTS. NO FURTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) NEFF 2-TON 3PH HYDRAULIC PRESS SAFETY-LIGHT-CURTAINS ADJ-PRESS/SPEED 7"-TRAVEL X SPECIFICATIONS: MANUFACTURER: NEFF MODEL: UNKNOWN SN: P9978 DATE: 11/94 TONNAGE: 2 TON / 2300 PSI RAM TRAVEL: 7" SAFETY LIGHT CURTAINS PRESSURE ADJUSTMENT PRESSURE GUAGE SPEED ADJUSTMENT OPERATING PRESSURE: 300 - 2300 PSI 2 HP 230/460VAC 60 HZ 3 PHASE WORK AREA/BASE(WITHOUT NOTCH): 10-1/2"D X 11-1/2"W NOTCH: 2"W X 4-1/4"D SKU: V34L001 5D-03-03(1) 970LBS - 48IN X 40IN X 73IN

1989 LEBLOND MAKINO FNC-74-A20 CAT SPINDLE SECTION WITH FANUC 6S AC SPINDLE MOTOR. SPECIFICATIONS: MANUFACTURER: LEBLOND MAKINO, AC SPINDLE MOTOR: FANUC, MODEL: 6S, TYPE: A06B-0754-B100, DATE: 89.02, RATING: CONT./30 MIN. 5.5/7.5 KW, AMP(~): CONT./30 MIN. 22/31 A, VOLT(~): 200V, 1500-6000 RPM, 4 POLE, 3 PHASE, INSULATION CLASS: F, RULE: JEC-37. CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. IT HAS SCUFFS AND SCRATCHES FROM NORMAL USE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS ITEM WAS NOT TESTED BY US, SINCE WE DO NOT HAVE THE PROPER RESOURCES, THOUGH IT WAS REMOVED FROM A WORKING MACHINE (FNC-74-A20 CAT) AT A DECOMMISSIONED FACILITY. NOTE: THE SIGHT GLASS WAS DAMAGED. THE TOP "BUBBLE TOP" HAS BECOME SEPARATED FROM THE THREADED PART IN THE EQUIPMENT, AS SEEN IN THE IMAGES. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. SKU: T03L010 5B-04-02(1) 1236LBS - 54IN X 45IN X 34IN

(4) UNBRANDED BLACK INDUSTRIAL SWIVEL TYPE 2-LOCKING CASTER WHEELS - SWIVEL TYPE, COLOR: BLACK, WHEEL DIAMETER: 4", WHEEL WIDTH: 2.50", SHAFT DIAMETER: 3.25", TOTAL HEIGHT: 4", SHAFT LENGTH: 2.50"

[CTI CONVEYOR TECHNOLOGIES] SG-II-E-RL-R-B1 SLIDE GATE PCB BOARD 30" AISLE WIDTH - MANUFACTURER: CONVEYOR TECHNOLOGIES CTI MODEL: SG-II-E-RL-R-B1-0640 CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THIS GATE IS IN FAIR COSMETIC CONDITION WITH LOTS OF SCUFFS/SCRATCHES TO THE BARE METAL, AS WELL AS RESIDUES FROM OLD ADHESIVE LABELS. THE CONVEYOR BELTS ARE WORN BUT STILL SERVICEABLE. THE LIGHT TOWER BASE IS BADLY BROKEN. THE E-STOP BUTTON ON THE CONTROL PANEL IS BROKEN BUT WORKS. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS GATE IS IN GOOD WORKING CONDITION. WE SAW THE CONVEYOR EXTEND AND RETRACT, THE BELTS ON BOTH SIDES RUN, THE WIDTH ADJUSTMENT IS EASY, AND ALL THE SENSORS WORK. THE OPTICAL AISLE-BLOCKED SENSORS REQUIRE A REFLECTOR EACH (NO REFLECTORS INCLUDED). THE BUMP SWITCHES WORK. THE STACK LIGHT LIT UP RED AND AMBER BUT WE BUT WE NEVER SAW GREEN. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) CTI SG-II-E-RL-R-B1-0640 SLIDE GATE CONVEYOR SPECIFICATIONS: MANUFACTURER: CONVEYOR TECHNOLOGIES, INC. (CTI) MODEL: SG-II-E-RL-R-B1-0640 SLIDE GATE II CUTOMATIC PCB CONVEYOR DELIVERS BOARDS ACROSS AN AISLE WAY TO A DOWNSTREAM MACHINE WITHOUT PERMANENTLY BLOCKING THE AISLE RETRACTS WHEN NOT IN USE, LEAVES AISLE OPEN APPROXIMATELY 30" AISLE WIDTH ADJUSTABLE CONVEYOR WIDTH: MINIMUM BOARD SIZE: 2" X 4" MAXIMUM BOARD SIZE: 16" X 18" CONVEYOR HEIGHT: 37.5" PNEUMATIC CYLINDER DRIVE FOR SMOOTH OPERATION DUAL SCREWS AND DUAL LINEAR GUIDES FOR PRECISE WIDTH ADJUSTMENTS OMRON PLC CONTROLLER OPTIONAL "AREA CLEAR" PHOTO EYES ARE FITTED OPTIONAL LIGHT TOWER IS FITTED E-STOP BUTTONS ON FRONT AND END REMOVABLE FRONT PANEL IS INTERLOCKED FOR SAFETY SAFETY BUMPER SWITCHES ON SLIDE END POWER: 120V 60HZ 0.9A PLUS COMPRESSED AIR SKU: X11D012 6-BILR2(1) 705LBS - 54IN X 44IN X 60IN

[NEW] TIG STAR T53N58 #4 CERAMIC GAS LENS NOZZLE 1/4" (30). THESE NOZZLES ARE IN A NEW AND UNUSED COSMETIC CONDITION AND COME INDIVIDUALLY PACKAGED IN THE ORIGINAL TIG STAR BOXES OF 10 THAT DO SHOW SOME SIGNS OF SHELF WEAR AND OCCASIONALLY WRITING ON THE OUTSIDE OF THE BOX. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (30) TIG STAR 53N58 #4 CERAMIC TIG GAS LENS CUP NOZZLE 1/4" SPECIFICATIONS: MANUFACTURER: TIG STAR MODEL: 53N58 DESCRIPTION: CERAMIC TIG WELDING GAS LENS CUP NOZZLE #4 1/4" SKU: U51H024 4B-01-02(1) 2LBS - 6IN X 6IN X 4IN

[THK BLK3232D] THK BLK3232D 93.375" NO PRELOAD TYPE ROLLED BALL SCREW 1.25" DIAMETER SHAFT. MANUFACTURER: THK MODEL: BLK3232D NO PRELOAD TYPE ROLLED BALL SCREW SHAFT LENGTH: 93.375" SHAFT DIAMETER: 1.25" BALL SCREW DIAMETER: 2.28" BALL SCREW LENGTH: 2.754" BALL TO CENTER DIAMETER: 33.25 MM THREAD MINOR DIAMETER: 28.3 MM NUMBER OF LOADED CIRCUITS: ROWS X TURNS: 4 X 1.8 BASIC LOAD RATING: 31.3 KN, 107.8 KN PITCH: .35" LEAD: .75"

2011 PENSAR 018520 HOT TEST HANDLER/OVEN FOR ITEMS ON 11" X 7.5" PALLETS (A FEW PALLETS ARE INCLUDED) CONVECTION-HEATED CHAMBER HAS TWO QUARTZ INFRARED LAMP STATIONS TO EXPOSE THE BOTTOM OF YOUR ITEMS PROGRAMMABLE EXPOSURE TEMPERATURE AND TIMING MANUAL LOADING/UNLOADING (UNLESS YOU ARE CLEVER WITH ROBOTICS!) EXIT STATION HAS A COOLING FAN RETURN CONVEYOR BRINGS PALLETS BACK TO THE OPERATOR EXIT CONVEYOR IS REVERSIBLE PNEUMATIC PALLET LIFT STATION FOR TEST/INSPECTION AFTER BOTH IR STATIONS, LIFTS ABOUT 4" PNEUMATIC PALLET LIFT STATION MOVES PALLETS TO RETURN CONVEYOR FULL-LENGTH PREHEATER BLOWERS ALONG BOTH SIDES OF THE CHAMBER CLAMSHELL-OPENING LIDS FOR EASY ACCESS BRUSHLESS DC CONVEYOR MOTORS T-SLOT ALUMINUM FRAME CONSTRUCTION NO CLEARANCE UNDER PALLETS (THEY RUB ON THE WAY THROUGH THE EXIT DOOR), LOOKS LIKE A COUPLE OF INCHES TOP CLEARANCE POWER REQUIREMENT: 208V 3PHASE 60HZ 50A PLUS COMPRESSED AIR 3CFM AT 80 PSI MANUFACTURED IN 2011 SKU: X46D014 6-BILR1(1) 2200LBS - 115IN X 59IN X 95IN THIS HANDLER IS IN FAIR COSMETIC CONDITION, WITH LOTS OF MINOR RESIDUES/STAINS FROM PRIOR USE, AS WELL AS ADHESIVE LABEL RESIDUES OUTSIDE. AN INTERLOCK KEY FOR THE TEST STATION IS MISSING, ALONG WITH THE TEST APPARATUS FORMERLY USED BY THE PRIOR OWNER. THE E-STOP/POWER-ON SWITCH BOX HAS BEEN BROKEN OFF BUT ITS CABLE HOLDS IT PRETTY WELL IN PLACE. ONE OF THE PLEXIGLAS REAR LOWER PANELS IS MISSING, AND SEVERAL SIDE PANEL SCREWS ARE MISSING. DOCUMENTATION WITH THE MACHINE INDICATE IT WAS RECEIVING REGULAR MAINTENANCE UNTIL 2019. THIS OVEN IS IN GOOD WORKING CONDITION, WITH A COUPLE OF CAVEATS: THE INTERLOCK SWITCH FOR THE LIFT STATION, WE HAD TO OPEN THE SWITCH AND TOGGLE THE WORKS OVER AND PRETEND THE TOP DOOR WAS PRESENT AND CLOSED, BEFORE THE SYSTEM WOULD INITIALIZE FULLY. THE WINDOWS 7 ENTERPRISE ACTIVATION IS EXPIRED; YOU WILL NEED TO SUPPLY A KMS OR OTHER ACTIVATION SERVER TO REGAIN ACTIVATION. ONE OF THE FEET WON'T RETRACT, SO THIS OVEN IS DIFFICULT TO MOVE WITHOUT A LIFT TRUCK OR PALLET JACK. BUT SHE WORKS, AS FAR AS WE CAN TEST! WE WERE ABLE TO VERIFY BOTH PREHEAT ZONES AND BOTH QUARTZ LAMP ZONES HEAT UP. THE STOPS ALONG THE CONVEYOR ALL LIFT AND RETRACT ON COMMAND. THE ENTRY AND EXIT DOORS BOTH OPEN AND CLOSE. THE CONVEYORS ALL RUN ON COMMAND, AND ARE ALL FAIRLY NOISY - BOTH NORMAL NOISES FOR THIS KIND OF ROLLER CONVEYOR, AND SOME OCCASIONALL RUBBING NOISES. THE LIFTS BOTH LIFT AND LOWER ON COMMAND. THE TWO END TOP DOORS OPENED EASILY, BUT THE DOOR OVER THE LIFT ZONE SEEMS STUCK CLOSED AND WE DID NOT WANT TO FORCE IT. THE STACK LIGHT AND ALARM WORK. THE COGNEX BARCODE SCANNER FLASHES EVERY FEW SECONDS, LOOKING FOR PRODUCTS ON AN INCOMING PALLET. WITHOUT AN APPROPRIATE BARCODED ITEM, THE MACHINE COMPLAINED OF A TEST CABLEID NOT MATCHING THE SELECTED MODEL AND WE WERE NOT ABLE TO GET THE MACHINE TO RUN AN AUTOMATIC CYCLE - BUT THE MANUAL MAINTENANCE CONTROL SCREENS ALLOW PRETTY MUCH TOTAL CONTROL OVER THE MACHINE'S FUNCTIONS SO WE WERE ABLE TO TEST THE REST OF THE WORKS. THE PREVIOUS USER'S RECIPE CALLED FOR FAIRLY LOW TEMPERATURES OVER THE QUARTZ LAMPS, BUT WHEN TURNED TO THE MAXIMUM ALL THE LAMPS GLOWED ORANGE/YELLOW, WHICH WAS AMUSING TO WATCH. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) PENSAR 018520 HOT TEST HANDLER (1) BUNDLE OF ELECTRICAL SCHMATIC DIAGRAMS

[SANKI PEF-390BR] SANKI VIBRATORY HOPPER/390MM BOWL/LINEAR VIAL FEEDERS WITH P312 P212 CONTROLLERS - MANUFACTURER: SANKI MODEL: PEF-390BR. THIS LOT IS IN FAIR COSMETIC CONDITION WITH ONLY MINOR SCUFFS/SCRATCHES AND ADHESIVE LABEL RESIDUES FROM PRIOR USE. THE YELLOW SENSOR OVER THE BOWL HAS ITS CABLE CUT; WE ARE NOT SURE WHAT THIS IS FOR. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS LOT IS IN PARTIAL WORKING CONDITION. THE BOWL AND LINEAR FEEDERS BOTH WORK, USING THEIR DIGITAL CONTROLLERS. WITH A BUNCH OF 2ML VIALS IN THE BOWL, EVERYTHING BUZZES UNTIL ALL THE VIALS CAME OUT THE END OF THE LINEAR FEEDER PROPERLY ORIENTED. THE HOPPER FEEDER DOES WORK WHEN FED AN APPROPRIATE VOLTAGE USING A VARIAC. THE CONTROLLER FOR THE HOPPER FEEDER DOES NOT WORK, IT ONLY GIVES A STEADY 36V OUTPUT, WE ARE NOT SURE WHY. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) 3-STAGE VIBRATORY VIAL FEEDER WITH STAND SPECIFICATIONS: MANUFACTURER: SANKI VIBRATORY FEEDER SETUP FOR 2ML VIALS DESIGNED FOR AC 100V OR 200V 50/60HZ POWER PIEZO FEEDERS DO NOT AFFECT SMALL, MAGNETIC PARTS WITH THEIR DRIVE SECTIONS PIEZO FEEDERS SAVE UP TO 70% OF THE ENERGY OF ELECTROMAGNETIC DRIVES BULK HOPPER FEEDER: BHF-50 ELECTROMAGNETIC VIBRATORY FEEDER HOPPER OPENING: 49 CM SQUARE STANDARD LOAD: 15KG BOWL FEEDER: PEF-390BR PIEZO BOWL FEEDER DIAMETER: 390MM SET UP FOR 2ML PLASTIC VIALS LINEAR FEEDER: PEF-L250AG PIEZO IN-LINE FEEDER MAXIMUM CHUTE LENGTH: 70CM MAXIMUM CHUTE WIDTH: 50MM MAXIMUM CHUTE MASS: 5KG PIEZO FEEDERS HAVE ADJUSTABLE DIGITAL CONTROLLERS P312 AND P212 VARIABLE OUTPUT VOLTAGE VARIABLE OUTPUT FREQUENCY INPUT: 100/200V 50/60HZ (NOT 230V) SKU: X17D016 5K-11-01(1) 775LBS - 48IN X 40IN X 73IN

[AIM ELECTRA] AE-2010 SLIP CLUTCH ELECTRIC SCREWDRIVER CHUCK: 1/4" HEX POWER: 115VAC 50/60HZ CONNECTION: 5-PIN REQUIRES POWER CORD AND POWER SUPPLY (NOT INCLUDED) SPEED: 1000RPM 1/4" HEX DRILL BIT COMPATIBILITY. ALSO INCLUDES (1) AE-4010 SLIP CLUTCH ELECTRIC SCREWDRIVER CHUCK: 1/4" HEX POWER: 115VAC 50/60HZ CONNECTION: 5-PIN REQUIRES POWER CORD AND POWER SUPPLY (NOT INCLUDED) SPEED: 720RPM 1/4" HEX DRILL BIT COMPATIBILITY. CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THE SCREWDRIVERS ARE IN USED CONDITION WITH SCUFFS, SCRATCHES, AND GREASE RESIDUE FROM PREVIOUS USE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THE SCREWDRIVERS WERE REMOVED FROM DECOMMISSIONED ENVIRONMENTS. THE UNITS ARE BEING SOLD AS/IS FOR PARTS OR REPAIR DUE TO THE MISSING POWER SUPPLY AND CORD, AND INABILITY TO TEST. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN.

NUMATICS 081SA415K SOLENOID VALVES W/ FLEXIBLOCK MANIFOLD BANK - MANUFACTURER: NUMATICS MODEL: 081SA415K SOLENOID VALVE VOLTAGE: 120 VAC FREQUENCY: 50/60 HZ HOLDING CURRENT: .09 AMPS CV: 1/4 NPTF=1.0 FLOW CAPACITY: 46 SCFM AT 80 PSIG. INCLUDED: (7) NUMATICS 081SA415K SOLENOID VALVES (1) NUMATICS FLEXIBLOK MANIFOLD BANK

(4) INDUSTRIAL STEEL WHEEL SWIVEL TYPE SMALL ROLLING CASTER WHEELS WHEEL DIAMETER: 2.25" WHEEL WIDTH: 1 1/8" BASE DIMENSIONS: 3.25" X 2.50" TOTAL HEIGHT: 3" BOLT HOLE WIDTH: 1.50" X 2.50"

[PBF PRA700] 700W POWER SUPPLY UNIT +24V +15V -15V (+5V NOT WORKING) - MANUFACTURER: PBF - SFC ENERGY GROUP, MODEL: PRA700, DESCRIPTION: 700W POWER SUPPLY UNIT, INPUT: X1: 100-240VAC 4A 50/60HZ X2: 100-240VAC 6A 50/60HZ, OUTPUT: V1: 24V 10A V2: +15V 10A V3: -15V 10A V4: 5V 30A. SOLD AS-IS: THERE IS NO 5V OUTPUT. COMPONENT M5 ON THE MAIN BOARD IS DAMAGED. ALL OTHER OUTPUT VOLTAGES WERE TESTED AND VERIFIED.

68" COLD LAMINATOR TEKNEK 220V 1PH - MANUFACTURER: UNKNOWN MODEL: DOES NOT APPLY CONDITION: USED. THIS ITEM COMES IN NON-ORIGINAL PACKAGING. IT HAS SCUFFS AND SCRATCHES FROM NORMAL USE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: WHEN POWER WAS APPLIED, THIS ITEM RAN VERY SMOOTHLY. IT WAS NOT TESTED UNDER A LOAD. THERE WAS NOTHING PLACE ON OR RAN THROUGH THE ROLLERS. ALL THE ADJUSTMENTS, DIALS, ROLLERS, AND MOTORS ALL SEEM TO RUN/FUNCTION WITH NO PROBLEMS. THERE WERE THREE THINGS WE NOTICED THAT HAD AN ISSUE. THE BOTTOM BRAKE/CALIPER IS MISSING SOME SORT OF PART TO ATTACH TO THE BOTTOM ROD/ROLLER. ONE OF THE INTERNAL AIR VALVES HAS A LEAK AND WILL NEED TO BE REPLACED. THERE IS ONE MISSING AIR CYLINDER ON THE RIGHT SIDE OF THE TEKNEK ROLLER ASSEMBLY. NO FURTHER TESTING WAS PERFORMED. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) 68" COLD LAMINATOR TEKNEK SPECIFICATIONS: MANUFACTURER: UNKNOWN MODEL: UNKNOWN ADHESIVE ROLL CLEANING ADJUSTABLE PRESSURE 208-230VAC 60 HZ SINGLE PHASE ROLLER LENGTH: ORANGE & GREEN: 68"L TEKNEK ASSEMBLY ROLLERS: ~64"L EQUIPMENT: TEKNEK, XA3112VCH1600F/115/60 DAYTON, PERMANENT MAGNET DC MOTOR, 3/4-HP NILSTAT 3210: FLOWBAR CONTROLLER, OPM SYSTEMS, INC. QUARTZ TIMING TEKNEK - XCH CONTROL BOX BALDOR, DC MOTOR, 90VDC, 1-HP AIR MOTOR BRAKE SKU: V06L006 6-BILR2(1) 2700LBS - 116IN X 77IN X 69IN

TIG STAR T13N12 #8 CERAMIC GAS CUP NOZZLE 1/2" 13MM (40) - MANUFACTURER: TIG STAR MODEL: T13N12 CONDITION: NEW OTHER. THESE NOZZLES ARE IN A NEW AND UNUSED COSMETIC CONDITION AND COME INDIVIDUALLY PACKAGED IN THE ORIGINAL TIG STAR BOX THAT DOES SHOW SOME SIGNS OF SHELF WEAR AND OCCASIONALLY WRITING ON THE OUTSIDE OF THE BOX. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (40) TIG STAR T13N12 #8 CERAMIC GAS CUP NOZZLE 1/2" 13MM SPECIFICATIONS: MANUFACTURER: TIG STAR MODEL: T13N12 DESCRIPTION: CERAMIC TIG TORCH GAS CUP NOZZLE #8 1/2" 13MM SKU: V04H007 2O-02-01(1) 3LBS - 8IN X 8IN X 4IN

3"WX10'L PLASTIC EXTRUSION BLOW-OFF BELT CONVEYOR AIR EJECT V-SPD. INCLUDED: (1) AL-BE C-7-127A 3"WX10'L PLASTIC EXTRUSION BLOW-OFF BELT CONVEYOR AIR EJECT V-SPD. SPECIFICATIONS: PLASTIC EXTRUSIONS: MANUFACTURER: AL-BE MODEL: C-7-127A SN: 88-167 AD: 88823 115-120 VAC EXTERNAL AIR SOURCE: APPROX. 60-90 PSI CONVEYOR: MANUFACTURER: DORNER 4100 SERIES TYPE: BELT DIRECTION OF FLOW: LEFT MODEL: 0310-1 SIZE: 3"W X 10'L VARIABLE SPEED MOTOR: MANUFACTURER: BALDOR HP: 3/4 DIRECT CURRENT V: 90V DC AIR NOZZLES: QUANTITY: 10 9 - SOLENOIDS ADJUSTABLE POSITIONS. SKU: W29L007 6-BILR1(1) 576LBS - 139IN X 45IN X 55IN

MANNER INDUSTRIAL SHELVING ROLLING SWIVEL TYPE 4 CASTER WHEELS (4) MANUFACTURER: MANNER MODEL: DOES NOT APPLY WHEEL DIAMTER: 4" WHEEL WIDTH: 1" TOTAL HEIGHT: 5" STEM HOLE WIDTH: 0.25"

MARKAL 86463 THERMOMELT HEAT STICK TEMP 150-F 66-C (9) - MANUFACTURER: MARKAL MODEL: 86463 CONDITION: NEW OTHER. THESE HEAT STICKS ARE IN A NEW AND UNUSED COSMETIC CONDITION AND COME IN THE ORIGINAL MARKAL BOX THAT CONTAINS 9 STICKS. THE BOX SHOWS SOME SIGNIFICANT WEAR FROM STORAGE. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (9) MARKAL 86463 THERMOMELT HEAT STICK TEMP 150-F 66-C SPECIFICATIONS: MANUFACTURER: MARKAL MODEL: 86463 DESCRIPTION: THERMOMELT HEAT STICK TEMP 150-F 66-C THE BIG STICK! SKU: U50H017 1C-02-01(2) 2LBS - 8IN X 8IN X 4IN

MANNER MODEL: DOES NOT APPLY TWO LOCKING TWO ROLLING SHELVING SWIVEL TYPE 4" CASTER WHEELS (4) - MANUFACTURER: MANNER CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THE CASTERS ARE IN USED CONDITION WITH SCUFFS, SCRATCHES, AND SOME RESIDUE FROM PREVIOUS USE. THESE CASTERS DO NOT COME WITH THEIR SHAFTS. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THE CASTERS WERE REMOVED FROM DECOMMISSIONED MACHINES. THE WHEELS ROLL AND THE SWIVEL BASE WORKS AS INTENDED. NO FURTHER TESTING WAS PERFORMED AFTER REMOVAL. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (2) MANNER ROLLING SHELVING SWIVEL TYPE 4" CASTER WHEELS (2) MANNER TWO LOCKING SHELVING SWIVEL TYPE 4" CASTER WHEELS SPECIFICATIONS: MANUFACTURER: MANNER MODEL: DOES NOT APPLY DESCRIPTION: MANNER TWO LOCKING TWO ROLLING SHELVING 4" CASTER WHEELS SWIVEL TYPE TWO LOCKING CASTER WHEEL DIAMETER: 4" WHEEL WIDTH: 1" TOTAL HEIGHT: 5" STEM HOLE WIDTH: 0.25"

[SWEP] [B25HX16/1P-SN-S] INDUSTRIAL HEAT EXCHANGER 1.2MPA MAX WORKING PRESSURE MANUFACTURER: SWEP MODEL: B25HX16/1P-SN-S INDUSTRIAL HEAT EXCHANGER MAX FLOW: 9 M CUBED/HOUR, 36.63 GPM CHANNEL VOLUME: 0.114/0.114 DM CUBED CONSTRUCTION: 316/316L STAINLESS STEEL PLATES, COPPER BRAZING LENGTH: 20.75" WIDTH: 4.5" HEIGHT: 2" MAX WORKING TEMPERATURE: 200 C MAX WORKING PRESSURE: 1.2 MPA TEST PRESSURE: 2.4 MPA VOLUME: 0.798L PRIMARY, 0.912L SECONDARY

2015 EPILOG 8000 MINI 50 WATT LASER ENGRAVER WITH 24" X 12" HONEYCOMB BED. MANUFACTURER: EPILOG MODEL: 8000 LASER SYSTEM CONDITION: USED. THIS MACHINE IS IN FAIR COSMETIC CONDITION OVERALL. THERE ARE SCUFFS/SCRATCHES ON THE PAINT OUTSIDE AS WELL AS MINOR RESIDUES FROM PRIOR USE. THE PRIOR OWNER HAD VARIOUS ITEMS MOUNTED OUTSIDE AND SOME EXTRA HOLES REMAIN. THE "CRUMB CATCHER" REMOVABLE TRAY IS MISSING. THE TOP-PANEL STICKERS ARE PEELING AND TORN ON THE CORNERS. THE PREVIOUS OWNER FOUND THE AUTOFOCUS GOT IN THEIR WAY, SO THEY REMOVED THE TIP OF THE PLUNGER; AUTOFOCUS WILL NOT WORK UNLESS YOU REPLACE THAT PIECE. THE LENS AND MIRROR WERE RECENTLY REPLACED. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS ENGRAVER IS IN GOOD WORKING CONDITION. WE WERE ABLE TO RUN A FEW TEST PRINTS WITHOUT DIFFICULTY ON A WOODEN PLATE. THE ALIGNMENT, SENSORS AND AIR ASSIST ALL WORK AS EXPECTED. FOCUS WAS SET MANUALLY USING THE INCLUDED TOOL. NO OTHER TESTING WAS DONE. THE ROTARY ATTACHMENT WAS NOT TESTED. THE INCLUDED SOFTWARE IS A COPY OF THE DRIVERS WE USED TO SUCCESSFULLY TEST THIS WITH OUR OWN COMPUTER (COMPUTER NOT INCLUDED). PLEASE NOTE: THE DATE INDICATED ON THE LASER TUBE IS OLD AND IT MAY REQUIRE REPLACEMENT SOONER RATHER THAN LATER. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) EPILOG MINI 50 WATT LASER ENGRAVER (1) ROTARY ENGRAVING ATTACHMENT (1) LASER ALIGNMENT TARGET (1) LASER FOCUSING BRACKET (1) POWER CABLE (1) ETHERNET CROSSOVER CABLE (1) SOFTWARE DISC SPECIFICATIONS: MANUFACTURER: EPILOG CORPORATION MODEL: 8000 LASER SYSTEM MINI SERIES LASER ENGRAVER 24X12" WORKING AREA 5" MAXIMUM MATERIAL THICKNESS 50 WATTS LASER CONNECT TO YOUR PC BY USB OR ETHERNET POWER REQUIREMENT: 100-240V 47-63HZ 15A COMPRESSED AIR IS REQUIRED FOR THE AIR-ASSISTED BLOW-OFF FEATURE METAL HONEYCOMB MESH CUTTING BED CLEAR GLASS WIDE-OPENING TOP FOLD-DOWN FRONT-LOADING DOOR SAFETY INTERLOCKS ON DOORS REAR-PANEL VENTILATION PORT MANUFACTURED: 2015 (LASER TUBE: 2016) SKU: X20D005 3B-02-02(1) 9999LBS - 999IN X 999IN X 999IN

[PATLITE LME-FB] 3-TIER RED, GREEN, ORANGE SAFETY SIGNAL TOWERS (2) - PARTS - MANUFACTURER: PATLITE MODEL: LME-FB CONDITION: FOR PARTS OR NOT WORKING. COMES IN NON-ORIGINAL PACKAGING. THE SIGNAL TOWERS ARE IN USED CONDITION WITH SOME MINOR SCUFFS AND SCRATCHES FROM PREVIOUS USE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THE SIGNAL TOWERS WERE REMOVED FROM DECOMMISSIONED MACHINES. NO FURTHER TESTING WAS PERFORMED AFTER REMOVAL. THE UNIT IS BEING SOLD AS/IS FOR PARTS AND REPAIR DUE TO THE DETACHED SEGMENT ON ONE OF THE UNITS. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (2) AS-IS PATLITE LME-FB 3-TIER RED, GREEN, ORANGE SAFETY SIGNAL TOWERS 24V STACK LIGHTS SPECIFICATIONS: MANUFACTURER: PATLITE MODEL: LME-FB INDUSTRIAL SAFETY SIGNAL TOWER TYPE: FLASHING/ALARM RATED VOLTAGE: 24V AC/DC LED SEGMENTS: 3 COLOR: RED, ORANGE, GREEN TOTAL LENGTH: HOUSING DIAMETER: SHAFT DIAMETER: SKU: W45B013 2C-06-04(1) 5LBS - 28IN X 8IN X 8IN

TIG STAR T13N10 #6 ALUMINA GAS CUP NOZZLE 5/32" (40) MANUFACTURER: TIG STAR MODEL: T13N10 CONDITION: NEW OTHER. THESE NOZZLES ARE IN A NEW AND UNUSED COSMETIC CONDITION AND COME INDIVIDUALLY PACKAGED IN THE ORIGINAL TIG STAR BOXES OF 10 THAT DO SHOW SOME SIGNS OF SHELF WEAR AND OCCASIONALLY WRITING ON THE OUTSIDE OF THE BOX. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (40) TIG STAR T13N10 #6 ALUMINA GAS CUP NOZZLE 5/32" SPECIFICATIONS: MANUFACTURER: TIG STAR MODEL: T13N10 DESCRIPTION: ALUMINA CERAMIC TIG WELD GAS CUP NOZZLE #6 5/32" SKU: V03H010 2F-03-02(4) 2LBS - 6IN X 6IN X 4IN

(4) HAMMER GREEN HEAVY-DUTY STEEL SWIVEL TYPE ROLLING 2.5" CASTER WHEELS SWIVEL TYPE WHEEL DIAMETER: 2.50" WHEEL WIDTH: 1.50" BASE DIMENSIONS: 3.25" TOTAL HEIGHT: 3.50" BOLT HOLE WIDTH: 2.50"

[BEST WELDS] 2" X 4.25" HARDENED GLASS FILTER PLATE. MANUFACTURER: BEST WELDS MODEL: 932-105-8 DESCRIPTION: HARDENED GLASS LENS WELDING FILTER PLATE 2" X 4.25" (50.8MM X 108MM) SHADE 8. SKU: U49H018. INCLUDED: (35) BEST WELDS 2" X 4.25" HARDENED GLASS FILTER PLATE.

[MEASUREMENT SYSTEMS INTERNATIONAL MSI-3650] RF DIGITAL WEIGHT INDICATOR 10000 LB MAX SPECIFICATIONS: MANUFACTURER: MEASUREMENT SYSTEMS INTERNATIONAL MODEL: MSI-3650 RF DIGITAL WEIGHT INDICATOR ACCURACY: HB-44 CLASS III/IIIL MAXIMUM RESOLUTION: 12,500 DISPLAYED COUNTS/65,000 COUNTS INTERNAL LOAD CELLS: WILL DRIVE UP TO 8 350 OHM CELLS. WILL DRIVE UP TO 16 2000 OHM SENSITIVITY: .3 MICROVOLT PER DISPLAYED DIGIT MINIMUM DRIFT: ZERO-LESS THAN 5PPM/C, SPAN-LESS THAN 15 PPM/C CAPACITY: ANY CAPACITY CAN BE SPECIFIED UP TO 999,999 UNITS FILTERING: 6 POLE DIGITAL FILTERING, LOW, MEDIUM, HIGH POWER: 90 TO 250 VAC-48 TO 400 HZ, LESS THAN 3 VA, OR BATTERY OPERATED WITH 2 STANDARD "D" CELLS, DC OPERATED FROM 12 TO 56 V TEMPERATURE RANGE: -10 TO 80 C ENCLOSURE: NEMA 4, ALODINED AND POWDER COATED CAST ALUMINUM. REMOVED FROM A DECOMMISSIONED MACHINE. NO FURTHER TESTING WAS PERFORMED AFTER REMOVAL. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) MEASUREMENT SYSTEMS INTERNATIONAL MSI-3650 RF DIGITAL WEIGHT INDICATOR.

CLECO 28RSCP-18 PNEUMATIC PISTOL GRIP 1/4" AIR SCREWDRIVER/NUTRUNNER DRIVER - MANUFACTURER: CLECO MODEL: 28RSCP-18. CONDITION: USED. COME IN NON ORIGINAL PACKAGING. THE SCREWDRIVER HAS SOME SCUFFS AND BLEMISHES FROM PREVIOUS USE. THE SLIDING KNOB REVERSE HAS A CHIP BUSTED OUT OF IT (AS SHOWN IN PHOTO), BUT NOTHING TO INTERRUPT FUNCTION. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: OUR TESTS INCLUDED PLUGGING IN THE SCREWDRIVER TO AN AIR LINE HOSE. THE SCREWDRIVER WORKED SMOOTHLY WHEN TRIGGER AND CHUCK WERE PRESSED DOWN. REVERSE ALSO WORKED WITH NO ISSUES. NO FURTHER TESTING WAS PERFORMED. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) CLECO 28RSCP-18 AIR PNEUMATIC PISTOL GRIP SCREWDRIVER/NUTRUNNER. SPECIFICATIONS: MANUFACTURER: CLECO MODEL: 28RSCP-18 1/4" HEX TRIGGER PUSH TO START SLIDING KNOB REVERSE PISTOL GRIP STYLE QUICK CHANGE CHUCK. SKU: Q13U002 1B-04-02(1) 4LBS - 12IN X 12IN X 6IN

INDUSTRIAL GRANITE MACHINE BLOCK 32.75"L X 4.25"H X 4.25"W BLACK 3/16-32 HOLES 1.25" INDUSTRIAL MACHINE SURFACE MATERIAL: GRANITE LENGTH: 32.75" WIDTH: 4.25" HEIGHT: 4.25" THREADED HOLES: (10) 3/16-32 (4) #4-40 APPLICATION: BUILT FOR AN ANORAD LINEAR MOTION ASSEMBLY

INDUSTRIAL HEAVY-DUTY LOCKING SWIVEL TYPE ROLLING CASTER WHEELS (4) - MANUFACTURER: UNKNOWN MODEL: 368 CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THE CASTERS ARE IN USED CONDITION WITH SCUFFS, SCRATCHES, AND SOME RESIDUE FROM PREVIOUS USE. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: THE CASTERS WERE REMOVED FROM DECOMMISSIONED MACHINES. THE WHEELS ROLL AND THE SWIVEL BASE WORKS AS INTENDED. NO FURTHER TESTING WAS PERFORMED AFTER REMOVAL. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (4) INDUSTRIAL HEAVY-DUTY LOCKING SWIVEL TYPE ROLLING CASTER WHEELS SPECIFICATIONS: MANUFACTURER: UNKNOWN MODEL: 368 DESCRIPTION: INDUSTRIAL HEAVY-DUTY LOCKING SWIVEL TYPE ROLLING CASTER WHEELS SWIVEL TYPE WHEEL DIAMETER: 3" WHEEL WIDTH: 1.25" BASE DIMENSIONS: 3.75" X 2.75" TOTAL HEIGHT: 3.50" BOLT HOLE WIDTH: 3" X 1.75" SKU: W22G011 2O-01-01(2) 8LBS - 10IN X 10IN X 7IN