Industrial Electronic Manufacturing Process Equipment Parts Tools Day 3 of 3 day event

[HANKE CRIMP-TECHNIK 963-588 CRIMP MACHINE] CRIMPPRESS CRIMPMATIC AUTOMATIC. MANUFACTURER: HANKE. MODEL: 963-588. CONDITION: FOR PARTS OR NOT WORKING. SCUFFS AND SCRATCHES FROM NORMAL USE. ITEM WAS NOT FULLY TESTED. CAME UP IN STANDBY MODE. ASKED FOR A PASSWORD. MOTOR (CRIMP TOOL) RAN DIRECTLY WHEN BYPASSING THE CONTROL UNIT. INCLUDED: (1) HANKE CRIMP-TECHNIK 963-588 CRIMP MACHINE, (1) HANKE CRIMP-TECHNIK OPERATING INSTRUCTIONS CRIMPMATIC 963, (1) POWER ADAPTER. SPECIFICATIONS: MANUFACTURER: HANKE. MODEL: 963-588. 230VAC 3.4 AMPS 50/60 HZ. 1 - POWER ADAPTER (STEP-UP: 120V IN TO 230V OUT). 1 - HANKE CRIMP-TECHNIK OPERATING INSTRUCTIONS CRIMPMATIC 963. SKU: U11L008. HANKE 963-588 AUTOMATIC CRIMP-TECHNIK CRIMPPRESS CRIMPMATIC CRIMP MACHINE AS/IS. 325LBS - 48IN X 40IN X 39IN.

UNIVERSAL PCB CONVEYOR 25X50 INCH. PARTS MACHINE.

[PROTO 09935] 2-3/16-INCH 6-POINT #5 SPLINE DRIVE IMPACT SOCKET - MANUFACTURER: STANLEY PROTO MODEL: 09935 CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THIS SOCKET HAS SOME DINGS, SCUFFS, AND SCRATCHES, ALONG WITH SOME SPOTS OF RUST AND OTHER MARKINGS EVIDENT FROM NORMAL USE. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: THIS SOCKET WAS REMOVED FROM AN ACTIVE WORKING ENVIRONMENT AND WAS NOT TESTED SUBSEQUENT TO ITS REMOVAL. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) 2-3/16-INCH 6-POINT #5 SPLINE DRIVE IMPACT SOCKET BLACK OXIDE 4.0LB SPECIFICATIONS: MANUFACTURER: PROTO MODEL: 09935 DESCRIPTION: #5 SPLINE DRIVE 6-POINT IMPACT SOCKET SIZE: 2-3/16" SOCKET DIAMETER: 3-1/2" DRIVE DIAMETER: 2-3/8" LENGTH: 3-3/4" WEIGHT: 4.0LBS

PRECISION VALVE & AUTOMATION UV OVEN 60" LENGTH CONVEYOR FUSION HERAEUS. ULTRAVIOLET CURING CONVEYOR OVEN WITH RFID SENSING. CONVEYOR SIZE: 60" LONG, 13" WIDE PIN CHAIN EDGE-SUPPORTED CONVEYOR. POWER: 208V 3PHASE 60HZ 35A PLUS COMPRESSED AIR SUPPLY. COLOR TOUCHSCREEN HMI CONTROL INTERFACE. INTERLOCKED DOORS ON CONVEYOR AREA FOR PERSONNEL SAFETY. ULTRAVIOLET LIGHT SOURCE: HERAEUS NOBLELIGHT (FUSION) F300S 300 WATT/INCH MICROWAVE-POWERED ELECTRODELESS LAMP 6" MODULAR UNIT. INTEGRAL BLOWER. HIGH PEAK IRRADIANCE, LOW INFRARED. ELECTRODELESS LAMP HAS A LONG BULB LIFE, RAPID START/RESTART, AND GIVES LESS HEAT TO SUBSTRATE. ACCESSIBLE BUTTON/LAMPS AND LED INDICATORS FOR EASY MAINTENANCE AND TROUBLESHOOTING. UV POWER SUPPLY: FUSION UV SYSTEMS MODEL P300MT. UV IRRADIATOR: HERAEUS I300SB. HMI: UNITRONICS V1040-T20B-N. BALLUFF BIS00EK RFID HF READ/WRITE HEAD WITH PROCESSOR. MAGNETIC LATCH CLOSURES MOST DOORS. DIGITAL AIR PRESSURE SUPPLY GAUGE. 1.5-HORSEPOWER EXHAUST BLOWER. COUNTERS: MACHINE IDLE TIME: 433 HOURS, MACHINE UP TIME: 3219 HOURS, MACHINE TOTAL: 5884225. BOM: B00-5194. THIS OVEN IS IN GOOD OVERALL COSMETIC CONDITION, EXCEPT FOR SOME HEAVY SCRATCHING/SCUFFS ALL ACROSS THE BACK, AND SOME MINOR SCUFFS/SCRATCHES/DENTS AND RESIDUES ON EXTERIOR PANELS. IN THE CONVEYOR AREA, THERE IS SOME MINOR UV BLEACHING AND PRODUCT RESIDUES. THE CONVEYOR CHAIN IS LOOSE/SAGGING BUT RUNS QUIETLY. THERE ARE ADHESIVE STICKER RESIDUES IN A FEW PLACES, AND THE INSIDES HAVE LIGHT DUST. THE TOUCH SCREEN HAS SOME HARD RESIDUES THAT DON'T CLEAN OFF WITH WATER OR ALCOHOL. IN THE CONTROL ENCLOSURE, THERE IS A TECHNISOFT MOTOR CONTROLLER THAT IS NOT MOUNTED TO THE DIN RAIL. THIS SYSTEM IS IN GOOD WORKING CONDITION AS FAR AS WE CAN TEST. WE WERE ABLE TO VERIFY THE UV LAMP ILLUMINATES (VERY BRIGHT), THE CONVEYOR RUNS, AND THE BLOWERS BOTH WORK. THE PREVIOUS OWNER SAID THE SYS BLWR FUNCTION HAS BEEN BYPASSED (IT IS VERY OBVIOUS WHEN THE EXHAUST BLOWER IS RUNNING ANYWAY). INCLUDED: (1) PVA UV OVEN, (2) RETROFIT GUIDES, WITH WIRING DIAGRAM AND DRAWING OF THE SYSTEM, (1) INSTRUCTION BULLETIN FOR REPLACING I300 AIR PRESSURE SWITCH, (1) HERAEUS 291122 INSTRUCTION BULLETIN FOR BULB, SCREEN, AND REFLECTOR REPLACEMENT, (1) HERAEUS 588601 F300S/F300SQ UV LAMP SYSTEM PARTS LISTING MANUAL.

[MATE] PUNCH & DIE PRESS BRAKE TOOLING ATTACHMENT ASSORTED PUNCH & DIE ATTACHMENTS APPLICATION: FOR PRESS BRAKE TOOLING SYSTEMS CONSTRUCTION MATERIAL: STAINLESS STEEL ALL ROUND BOTTOM PRESS DIAMETER: 89MM ROUND BOTTOM PRESS HIGHT: 19MM (1) .850 X 1.970 + .018 W/ .850 X 1.970 (1) 1.004 X 2.004 W/ .063 C RAD W/ .96 X 1.968 W .045 C. RAD (1) .250 X 1.734 + .006 W/ 1.250 X 1.734 (1) .375 X 2.575 + .014 W/ .375 X 2.375

[WELDING INSULATOR GAS LENSE] STANDARD XWT18CG 17, 18, 26 WELDING INSULATOR GAS LENSE - MANUFACTURER: UNBRANDED MODEL: XWT18CG DESCRIPTION: WELDING INSULATOR GAS LENSE STANDARD TORCHES 17, 18, 26

[KURT] [D60] MACHINE VISE 6" WIDE MILLING MACHINE 6" OPENING W/ JAWS (1) KURT D60 MANUAL VISE 6" JAW WIDTH 6" MAX. JAW OPENING WITH JAWS 7-1/2" JAW OPENING WITHOUT JAWS 18-1/2" X 9" X 4-1/2" HIGH OVERALL DIMENSIONS MACHINED RAIL FOR PRECISION ALIGNMENT HARDENED BED SEMI-HARD STEEL SCREW NO HANDLE INCLUDED. VISE IS IN USED CONDITION WITH SCUFFS, SCRATCHES, AND DINGS ALL OVER. CLEANED AND MOST SWARF REMOVED. NUT HAS A PIECE MACHINED OUT BY THE PREVIOUS OWNER AND THE UNIT HAS A BENT PIECE OF METAL. NO HANDLE INCLUDED. OIL RE-APPLIED AND JAW MOVED EASILY. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS INCLUDED.

[NEW] SOUTH WELD 13N10 #6 ALUMINA CERAMIC NOZZLE 3/8" (50) MANUFACTURER: SOUTH WELD MODEL: 13N10 DESCRIPTION: ALUMINA CERAMIC TIG WELD GAS CUP NOZZLE #6 3/8" SKU: V03H015 2O-02-01(1) 2LBS - 6IN X 6IN X 4IN

[NEW] WELDTEC 796F71A NO. 4L LONG ALUMINA - 1/4" NOZZLE (40) - TIG NOZZLE NO. 4L LONG ALUMINA 1/4" X 1-7/8" TORCH SERIES: 9, 20, 22, 23, 25, SW-320 SKU: U51H001 1B-20-02(5) 2LBS - 7IN X 7IN X 7IN

2008 SPEEDLINE ACCELA SCREEN PRINTER CONVEYOR -PARTS MANUFACTURER: SPEEDLINE MODEL: ACCELA CONDITION: FOR PARTS OR NOT WORKING. THIS SYSTEM IS IN FAIR COSMETIC CONDITION. OTHER THAN SOME DUST, THE INSIDE OF THE MACHINE LOOKS PRETTY CLEAN. THERE IS WEAR AND SCUFFS/SCRATCHES OUTSIDE, ESPECIALLY ON THE OUTSIDE CORNERS. LABELS ARE DAMAGED. ONE OF THE LEGS IS BADLY BENT. THE CONVEYOR BELTS ARE BADLY CRACKED BUT INTACT. THE BOTTOM DOORS ON ONE SIDE DON'T CLOSE PROPERLY, AND ONE OF THE DOORS IS BADLY CRACKED (SHOWN). INSIDE THE CONTROL ENCLOSURE, NEAR THE HOURS COUNTER, THERE ARE SOME DISCONNECTED WIRES WE ARE NOT SURE WHAT THEY DO. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS MACHINE IS IN AT-LEAST-PARTIAL WORKING CONDITION. WITHOUT A PASSWORD FOR THE PRINTER SOFTWARE, WE ARE NOT ABLE TO PERFORM THOROUGH TESTING. WHEN THE SYSTEM POWERS ON, IT BOOTS INTO WINDOWS 10 AND LOADS MPM MONITOR/CONTROL SYSTEM V2.7.0 BUT WITHOUT ANY CREDENTIALS FOR THE SOFTWARE IT WON'T DO ANYTHING ELSE FOR US EXCEPT TELL US WE CAN'T DO ANYTHING! NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) SPEEDLINE ACCELA SCREEN PRINTER SPECIFICATIONS: MANUFACTURER: SPEEDLINE TECHNOLOGIES MPM MODEL: ACCELA SCREEN PRINTER MAXIMUM PRINT AREA: 22" X 20" MAXIMUM BOARD SIZE: 22" X 20" MINIMUM BOARD SIZE: 2" X 2" BOARD THICKNESS: 0.152MM TO 12.7MM, UP TO 7KG PRINT SPEED: 6MM TO 305MM /SECOND PRINT STROKE: +/-11 FROM CENTER CYCLE TIME: <5.5 SEC VISION ALIGNMENT REPEATABILITY: +/-12.5 MICRONS 69" CROSSWAYS THROUGH CONVEYOR AUTOMATIC STENCIL CLEANER SOFTWARE RUNS ON WINDOWS COMPUTER POWER: 230V 1PHASE 50/60HZ 3.5KVA PLUS COMPRESSED AIR MANUFACTURED: IN USA, 2008 SKU: X28D002 6-BILR1(1) 5000LBS - 109IN X 77IN X 86IN

[NEW] QUALTECH DWTHX112 1"-12 CARBON STEEL HEX RIGHT-HAND RETHREADING DIE. SPECIFICATIONS: MANUFACTURER: QUALTECH MODEL: DWTHX112 DESCRIPTION: CARBON STEEL HEX RIGHT-HAND RETHREADING DIE SIZE: 1.0"-12 MATERIAL: CARBON STEEL STYLE: HEX DIE HEX SIZE: 1-13/16" (45.7MM) THICKNESS: 1" CUTTING DIRECTION: RIGHT HAND

MOTION 510 CNC ROUTER 233"L X 113"W X 120"H (PLUS FIXTURES, GUARDS, CONTROL CABINET AND VACUUM PUMPS). 220V 3PHASE POWER, 60 AMPS (40KVA) - SYNTEC EZ4 CONTROLLER. - SILICON THERMAL CH2400-LR WATER CHILLER - ZHNENJIANG TONGYOU ZBW160E VACUUM PUMPS - WATER-COOLED KERAMIK ES929 TOOL CHANGE STATION

[55 FEET] UNBRANDED SKATE WHEEL GRAVITY CONVEYOR 36"W X 2" ROLLERS 3.5"H STEEL W/ LEGS (4) UNBRANDED 120" SKATE WHEEL GRAVITY CONVEYOR SECTIONS 36" WIDTH 2" ROLLERS 3.5"H (2) UNBRANDED 120" SKATE WHEEL GRAVITY CONVEYOR SECTIONS 36" WIDTH 2" ROLLERS 3.5"H (10) TGW M60278767 G01 34-41 SUPPORT ACC2-RF-34BF 29 5:41EL-2XM-STD CONVEYOR LEG SECTIONS. TOTAL LENGTH: 55 FEET. 2" ROLLERS. 11 ROLLERS / AXEL. TOTAL WIDTH: 36-1/2". CONVEYOR HEIGHT: 3-1/2". STEEL CONSTRUCTION.

[CLECO] [4RSAL-10B] PNEUMATIC PUSH TO START 1/4" AIR STRAIGHT SCREWDRIVER/NUTRUNNER - MANUFACTURER: CLECO MODEL: 4RSAL-10B CONDITION: USED. COMES IN NON ORIGINAL PACKAGING. THE SCREWDRIVER IS IN GOOD COSMETIC CONDITION WITH LIGHT SCRATCHES AND BLEMISHES FROM PREVIOUS USE. SOME OF THE SCREWDRIVERS DO NOT COME WITH AN AIR INLET QUICK-COUPLER. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: OUR TESTS INCLUDED PLUGGING IN THE SCREWDRIVER TO AN AIR LINE HOSE. WHILE PRESSING THE LEVER DOWN, FORWARD POSITION WORKED GREAT WITH NO ISSUES. WHEN THE REVERSE BUTTON WAS PRESSED DOWN ALONG WITH THE LEVER, REVERSE WORKED WITH NO PROBLEMS. NO FURTHER TESTING WAS PERFORMED. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) CLECO 4RSAL-10B AIR PNEUMATIC SCREWDRIVER/NUTRUNNER SPECIFICATIONS: MANUFACTURER: CLECO MODEL: 4RSAL-10B 1/4" QUICK CHANGE CHUCK STRAIGHT PUSH TO START-PUSH REVERSE BUTTON 3LBS - 15IN X 8IN X 4IN

[SPARKS BELTING MHD1.9-17.36-30-VO] SPARKS BELTING MICROROLLER MHD1.9-17.36-30-VO 19.25"X1.91" CONVEYOR ROLLER SPECIFICATIONS: MANUFACTURER: SPARKS BELTING MODEL: MHD1.9-17.36-30-VO CONVEYOR ROLLER MOTORIZED PULLEY GROOVES: 2 VOLTAGE RATING: 24VDC ROLLER LENGTH: 17.5" TOTAL LENGTH: 19.25" DIAMETER: 1.91" ACTUATION: BALL BEARING, ELECTRONIC HEX DIAMETER: 0.43" THREAD DIAMETER: 0.44" FINISH/COLOR: SILVER CONNECTION: 9-PIN

[NUMATICS] FLEXIBLOCK 228-690B SOLENOID VALVES MARK 15 100-120VAC - MANUFACTURER: NUMATICS MODEL: 228-690B CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THIS ITEM IS IN USED CONDITION WITH SCUFFS, RESIDUE, AND THE PAINT IS CHIPPED. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS ITME WAS REMOVED FROM A DECOMMISSIONED MACHINE. NO FURTHER TESTING WAS PERFORMED AFTER REMOVAL. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) NUMATICS FLEXIBLOCK 228-690 WITH 2 VALVES AND 2 "THE SILENCER" ATTACHMENTS SPECIFICATIONS: MANUFACTURER: NUMATICS VALVE MODEL: 1G2SA400K FLEXIBLOCK 228-690B MATERIAL: IRON LENGTH: 304.8MM OUTER DIMS: 254MM INNER DIMS: 127MM VOLTAGE: 100-120VAC FREQUENCY RATING:50/60HZ MARK 15 SOLENOID VALVE COMPATIBLE SKU: R36B008 1B-06-02(1) 12LBS - 16IN X 12IN X 8IN

[CMC] CMC DIRECT MAILING VIBRATING/DOWN-STACKING TAMPING ALIGNMENT AND PUSHER CONVEYOR POWERED INFEED DRIVES ITEMS INTO DOWN-STACKING ACCUMULATION AREA COMPRESSED AIR BLOWS ON THE LEFT CORNER LEFT SIDE IS VIBRATED FROM BELOW RIGHT SIDE HAS A TAMPER TO ALIGN EDGES PUSHER DRIVES TO A STOP, ALIGNS OTHER EDGE PUSHER DRIVES ITEMS OUT THE SAME DIRECTION AS INFEED, OFFSET TO LEFT PNEUMATIC PUSH DRIVES ELECTRIC VIBRATION KEYENCE IV-G500MA AUTOFOCUSING MONOCHROME MACHINE VISION HEAD AT INFEED (2) PRODUCT SENSORS ON INFEED AREA ALLEN-BRADLEY GREEN/AMBER STACK TOWER LIGHT 250LBS - 53IN X 46IN X 71IN

(LOT OF 4) CASTERS 4" X 1.25" HEAVY DUTY INDUSTRIAL ALL STEEL 2 FIXED 2 SWIVEL - MANUFACTURER: UNBRANDED MODEL: DOES NOT APPLY CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. PHYSICALLY, THESE CASTERS ARE IN GOOD TO FAIR OVERALL COSMETIC CONDITION WITH SCUFFS AND SCRATCHES FROM PREVIOUS USE. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: THESE CASTERS SWIVEL AND ROLL AS DESIGNED. NO FURTHER TESTING WAS PERFORMED. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (4) CASTERS 4" X 1.25" HEAVY DUTY INDUSTRIAL ALL STEEL 2 FIXED 2 SWIVEL SPECIFICATIONS: MANUFACTURER: VARIOUS MODEL: VARIOUS WHEEL: 4" X 1.25" MOUNTING PLATE: 4" X 3" GALVANIZED STEEL SKU: R02G024 2O-04-02(4) 14LBS - 16IN X 16IN X 8IN

1992 CONTROLLASER SCRIPT 50 SCANNING MARKING LASER W/GALVO HEAD+POWER SUPPLY-PARTS MANUFACTURER: CONTROLLASER CLC MODEL: SCRIPT CONDITION: FOR PARTS OR NOT WORKING. THIS LOT IS IN FAIR COSMETIC CONDITION WITH MINOR BLEMISHES FROM PRIOR USE INCLUDING SCUFFS/SCRATCHES AND STAINS/RESIDUES HERE AND THERE ALL OVER. THIS CAME TO US INCOMPLETE. YOU WILL NEED AT LEAST A CHILLER AND WHATEVER USED TO PLUG INTO THE CONTROLLER CONNECTIONS TO MAKE THIS WORK, PLUS A CONTROL COMPUTER. NO COMPUTER IS INCLUDED. THE MANUALS ARE FOR A SCRIPT 75 BUT CAME WITH THE MACHINE AND THEY'LL BE RECYCLED OTHERWISE SO WE'RE SENDING THEM TO YOU IN CASE YOU'LL FIND THEM USEFUL. AN ND:YAG ROD ASSEMBLY IS IN A BOX MARKED AS "NEEDING REFURBISHMENT" WE ARE NOT SURE WHAT THIS MEANS. A CONNECTOR INSIDE THE LASER HEAD SHOWS MINOR CORROSION ON THE OUTSIDE. SEVERAL PLUGS HAVE NO MATES. ONE BNC FROM THE LASER HEAD AND SEVERAL ON THE BACK OF THE CONTROLLER PARTS. THIS UNIT WAS COOLED BY A CHILLER WITH A DEIONIZER, SO IT WAS ONLY RUNNING DI WATER. THE LASER POWER SUPPLY HAS A NOTE ON IT, "NOT GOOD, NO LAMP IGNITOR!" THE BOX WITH FAULT ANNUNCIATORS ON FRONT THAS A NOTE ON IT, "REMOVED FROM SIGNATURE JUNE 25, 2018 WILL NOT CLEAR PF FAULT." THE POWER SUPPLY'S LABEL IS BADLY DAMAGED. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS SYSTEM WAS SUPPOSED TO BE WORKING WHEN WE GOT IT, BUT INCOMPLETE. IT THEN SAT IN OUR WAREHOUSE FOR FIVE YEARS. WE ARE NOT ABLE TO PERFORM ANY TESTING ON THIS LOT. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) CLC SCRIPT LASER HEAD (1) POWER SUPPLY (1) POWER DISTRIBUTION UNIT (1) ALARM UNIT (1) CONTROL PANEL SPECIFICATIONS: MANUFACTURER: CONTROL LASER CO. (CLC) MODEL: SCRIPT 50 WATTS MARKING LASER X-Y SCANNING GALVO HEAD ND:YAG LASER, 1064NM WATER COOLED (REQUIRES A CHILLER, NOT INCLUDED) Q SWITCHED WITH RF DRIVER AND POWER SUPPLY (SEE NOTES!) LASER HEAD: CONTROLLASER MODEL SCRIPT SCANNING HEAD P/N 0206-03677 Q-SWITCH P/N 801-0100 FROM TJS IN FLORIDA LICENSED BY PATLEX FROM QUANTRONIX CORP. SCANNING MIRRORS DRIVEN BY GSI GROUP MOTORS WITH HEATERS MANUFACTURED JULY 1992 FACILITY REQUIREMENTS: 220V 1 PHASE 60HZ 4.5KW PLUS DEIONIZED COOLING WATER OTHER VISIBLE PART NUMBERS: 0206-03448 POWER SUPPLY 902-0101-1 212050 212233 0206-03677 SKU: X10D010 5F-19-02(1) 280LBS - 72IN X 40IN X 40IN

(2) CONTINENTAL 1120-8M-20 CONTITECH HAWK PD TIMING BELTS SPECIFICATIONS: MANUFACTURER: CONTINENTAL MODEL: 1120-8M-20 TIMING BELT CONTITECH HAWK PD LENGTH: 1120MM (44") WIDTH: 20MM (.78") PITCH: 8MM NUMBER OF TEETH: 140

[PROTO] 09919 1-3/16-INCH 6-POINT #5 SPLINE DRIVE IMPACT SOCKET 1.75LBS TORQUEPLUS. MANUFACTURER: PROTO MODEL: 09919 DESCRIPTION: #5 SPLINE DRIVE 6-POINT IMPACT SOCKET SIZE: 1-3/16" SOCKET DIAMETER: 1-7/8" DRIVE DIAMETER: 2-3/8" LENGTH: 3-1/4" WEIGHT: 1.75LBS

[SCHUNK AGE-XY-050] COMPENSATION UNIT XY 2.5MM 6 KG 12 300N - MANUFACTURER: SCHUNK MODEL: AGE-XY-050 324450 CONDITION: NEW OTHER. THIS COMPENSATION UNIT IS IN A NEW AND UNUSED COSMETIC CONDITION AND COMES IN THE ORIGINAL OPEN SCHUNK BOX THAT SHOWS SOME DAMAGE FROM STORAGE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) SCHUNK AGE-XY-050 0324450 COMPENSATION UNIT XY 2.5MM 6 KG 12 300N SPECIFICATIONS: MANUFACTURER: SCHUNK MODEL: AGE-XY-050 PN: 0324450 DESCRIPTION: COMPENSATION UNIT XY COMPENSATION XY [MM] 2.5 DEFLECTION ROTATORY [] 12 RECOMMENDED HANDLING WEIGHT, VERTICAL [KG] 6 RECOMMENDED HANDLING WEIGHT, HORIZONTAL [KG] 4 LOCKING FORCE [N] 235 MAX. LOAD FORCE LOCKED [N] 130 MAX. DISTANCE SHIFTING FORCE Z [MM] 120 MIN. OPERATING PRESSURE [BAR] 2.5 MAX. OPERATING PRESSURE [BAR] 8 NOMINAL OPERATING PRESSURE [BAR] 6 REPEAT ACCURACY [MM] 0.1 ROBOT-SIDE CONNECTION ISO 9409-1-50-4-M6 WEIGHT [KG] 0.46 MIN. AMBIENT TEMPERATURE [C] 5 MAX. AMBIENT TEMPERATURE [C] 60 DIAMETER D [MM] 65 HEIGHT Z [MM] 48 MOMENT MX MAX. [NM] 16 MOMENT MY MAX. [NM] 16 MOMENT MZ MAX. [NM] 3.5 FORCE FZ MAX. [N] 300 MAX. FORCE FD [N] 1700 SKU: X19H012 1E-07-02(1) 3LBS - 8IN X 8IN X 4IN

[NUMATICS 081RS100J REGULATOR VALVE] MANUFACTURER: NUMATICS MODEL: 081RS100J CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THIS ITEM IS IN USED CONDITION WITH SOME SCUFFS AND SCRATCHES. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS ITEM WAS REMOVED FROM A DECOMMISSIONED MACHINE. NO FURTHER TESTING WAS PERFORMED AFTER REMOVAL. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) NUMATICS 081RS100J REGULATOR VALVE (1) NUMATICS 082SA425M SOLENOID VALVE SPECIFICATIONS: MANUFACTURER: NUMATICS MODEL: 081RS100J REGULATOR VALVE MATERIAL: IRON LENGTH: 203.2 MM OUTER DIMS:152.4 MM INNER DIMS:152.4MM VOLTAGE:24 VDC FREQUENCY RATING: 50/60HZ MANUFACTURER: NUMATICS MODEL: 082SA425M SOLENOID VALVE VOLTAGE: 24VDC AMPERES: .25 SKU: R36B010 1B-14-02(1) 2LBS - 10IN X 10IN X 10IN

[UNBRANDED] CIRCULAR PUNCH PRESS & DIES 4.25" D (1) CIRCULAR DIE (1) SQUARE DIE - MANUFACTURER: UNBRANDED MODEL: DOES NOT APPLY CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THE PUNCH PRESS & DIE SETS ARE IN GOOD USED CONDITION WITH SOME MINOR SCUFFS AND SCRATCHES FROM PREVIOUS USE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THE PUNCH PRESS & DIE SETS WERE REMOVED FROM A DECOMMISSIONED MACHINE. NO FURTHER TESTING WAS PERFORMED AFTER REMOVAL. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) 4.25" DIAMETER CIRCULAR PUNCH PRESS & SQUARE DIE (1) 4.25" DIAMETER CIRCULAR PUNCH PRESS & CIRCULAR DIE SPECIFICATIONS: MANUFACTURER: UNBRANDED MODEL: DOES NOT APPLY PUNCH PRESS & DIE DESIGN: CIRCULAR DIE APPLICATION: ATTACHMENTS FOR PRESS BRAKE TOOLING SYSTEMS SCREW THREAD SIZE: .27" PRESS DIAMETER: 4.25" DIE DIAMETER: 2.750" + .010 CONSTRUCTION MATERIAL: STAINLESS STEEL MODEL: DOES NOT APPLY PUNCH PRESS & DIE DESIGN: SQUARE DIE APPLICATION: ATTACHMENTS FOR PRESS BRAKE TOOLING SYSTEMS SCREW THREAD SIZE: .34" PRESS DIAMETER: 4.25" DIE DIAMETER: 2 1/8" (CIRCULAR TOP), 2" (SQUARE SIDE) CONSTRUCTION MATERIAL: STAINLESS STEEL SKU: T24B001 2J-04-02(1) 10LBS - 8IN X 8IN X 4IN

[29] SOUTH WELD 105Z60 #5 LONG CERAMIC LAVA NOZZLE 5/16" - MANUFACTURER: SOUTH WELD MODEL: 105Z60 DESCRIPTION: LONG CERAMIC TIG WELD GAS CUP LAVA NOZZLE #5 5/16" SKU: V03H013 2O-02-01(1) 5LBS - 7IN X 7IN X 7IN

(4) ROLLING INDUSTRIAL 5" SWIVEL TYPE HEAVY-DUTY CART CASTER WHEELS. THE CASTERS ARE IN USED CONDITION WITH SCUFFS, SCRATCHES, AND SOME RESIDUE FROM PREVIOUS USE. THE WHEELS ROLL AND THE SWIVEL BASE WORKS AS INTENDED. NO FURTHER TESTING WAS PERFORMED AFTER REMOVAL. SWIVEL TYPE WHEEL DIAMETER: 5" WHEEL WIDTH: 1" TOTAL HEIGHT: 5.75" SHAFT LENGHT: 1.75" SHAFT DIAMETER: 0.75"

[SPI 13-101-1 IP54 ELECTRONIC MICROMETER] RANGE/SIZE: 0-1", 25MM RESOLUTION: 0.00005"/0.001MM ACCURACY: 0.00016" SPINDLE DIAMETER: 0.250" DEGREE OF PROTECTION: IP54 LEVER LOCK. [FOWLER DIGITAL DEPTH GAUGE] DIAL FACE: 2 1/4" RESOLUTION: 0.0005"/0.01MM BATTERY TYPE: CR2032.

[FESTO IEPL-03-MP SOLENOID VALVE MANIFOLD BLOCK W/ FESTO SOLENOID VALVES (4)] MANUFACTURER: FESTO MODEL: IEPL-03-MP CONDITION: USED. COMES IN NON ORIGINAL PACKAGING. ITEMS ARE IN USED CONDITION WITH SCUFFS, SCRATCHES, AND SOME RESIDUE FROM PREVIOUS USE. THE METAL BRACE ON THE SILENCER ATTACHMENT IS BENT. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: ITEM WAS REMOVED FROM A DECOMMISSIONED MACHINE. NO FURTHER TESTING WAS PERFORMED AFTER REMOVAL. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) FESTO IEPL-03-MP SOLENOID VALVE MANIFOLD BLOCK (1) FESTO PEV-1/4-B PRESSURE SWITCH (2) FESTO VIGI-03-7 MANIFOLD BLOCKS (1) FESTO IMP2-03-1 VALVE MANIFOLD CONNECTING TERMINAL (1) FESTO VIGP-03-7 ADAPTER PLATE MANIFOLD BLOCK (2) FESTO JN02 SOLENOID VALVES (1) FESTO K102 SOLENOID VALVE (1) FESTO H202 SOLENOID VALVE SPECIFICATIONS: MANUFACTURER: FESTO MODEL: IEPL-03-MP SOLENOID VALVE MANIFOLD BLOCK MODEL: PEV-1/4-B VOLTAGE: 250 VAC MAX, 125 VDC PRESSURE: 12 BAR, 175 PSI MODEL:IMP2-03-1 VALVE MANIFOLD CONNECTING TERMINAL P/N: 5583 MODEL: VIGI-03-7 MAXIMUM PRESSURE:13.05 TO 145 PSI (-9.19 TO 102 M H2O) MODEL: VIGP-03-7 PNEUMATIC VALVE ADAPTER MODEL: JN02 SOLENOID VALVE PRESSURE: 10 BAR VOLTAGE: 24 VDC MODEL: K102 SOLENOID VALVE PRESSURE: 10 BAR VOLTAGE: 24 VDC MODEL: H202 SOLENOID VALVE PRESSURE: 10 BAR VOLTAGE: 24 VDC SKU: R42B011 1D-10-03(1) 13LBS - 18IN X 12IN X 12IN

GREENHECK CUBE-20-20 CENTRIFUGAL UPBLAST EXHAUST FAN 208V 3PH 60HZ 3288-5456CFM IS IN USED CONDITION WITH SCUFFS, SCRATCHES, AND GRIME FROM PREVIOUS REGULAR USE. THERE ARE SOME MINOR DENTS AND BET EDGES ON THE COVER AND INNER LIP OF THE MOTOR HOUSING STRUCTURE. TWO MISSING SCREWS WERE REPLACED TO ATTACH THE ROD TO THE TOP. THE FAN WAS REMOVED FROM A DECOMMISSIONED FACILITY. THE FAN WAS CONNECTED TO POWER AND THE MOTOR POWERED ON. THE UNIT WAS TESTED USING A STANDARD BELT (NOT INCLUDED) AND SHOWED SIGNS OF NEEDING REPAIR FOR THE MOTOR AND IMPELLER SHAFT BEARINGS. THERE WAS A SLIGHT GRINDING/SCRAPING SOUND WHEN THE UNIT WAS POWERED ON INDICATING THE BEARINGS MAY NEED SERVICE AND/OR REPLACEMENT. FOR THESE REASONS, THE FAN UNIT IS BEING SOLD AS/IS FOR PARTS OR REPAIR. MANUFACTURER: GREENHECK MODEL: CUBE-20-20 CENTRIFUGAL UPBLAST EXHAUST FAN VOLTAGE: 208V FREQUENCY: 60HZ PHASE: 3 BASE DIMENSIONS: 30" X 30" RECOMMENDED ROOF OPENING: 26.5" X 26.5" ROOF OR WALL MOUNTABLE AIRFLOW RANGE: 3288-5456 CFM POWER: 2HP BELT DRIVE MOTOR IMPELLER DIAMETER: 21 5/8" UNIT WEIGHT: 120 LBS OVERALL DIAMETER: 35 3/8" HEIGHT: 28 5/8" DAMPER DIMENSIONS: 24" X 24" FRPM RANGE: 880-970

INDUSTRIAL HEAVY-DUTY SWIVEL 4.75" ROLLING CART GREEN CASTER WHEELS (4) - CONDITION: NEW OTHER. THESE CASTERS ARE IN NEW CONDITION WITH NO SIGNS OF USE. INCLUDED: (4) INDUSTRIAL HEAVY-DUTY SWIVEL TYPE ROLLING CART GREEN CASTER WHEELS SPECIFICATIONS: MANUFACTURER: UNKNOWN MODEL: DOES NOT APPLY DESCRIPTION: INDUSTRIAL HEAVY-DUTY ROLLING CART GREEN CASTER WHEELS SWIVEL TYPE ON-OFF LOCKING ROLLING CART CASTERS WHEEL DIAMETER: 4.75" WHEEL WIDTH: 1.25" TOTAL HEIGHT: 6.25" SHAFT LENGHT: 2.25" SHAFT DIAMETER: 0.75"

[24VDC] HOLJERON MR-AD-48-441-30-YWGQ 2-GROOVE MOTORIZED CONVEYOR PULLEY 18" X 2" - MANUFACTURER: HOLJERON MODEL: MR-AD-48-441-30-YWGQ CONVEYOR ROLLER MOTORIZED PULLEY GROOVES: 2 VOLTAGE RATING: 24VDC ROLLER LENGTH: 17.5" TOTAL LENGTH: 19.25" DIAMETER: 1.91" ACTUATION: BALL BEARING, ELECTRONIC HEX DIAMETER: 0.43" THREAD DIAMETER: 0.44" FINISH/COLOR: SILVER CONNECTION: 9-PIN

[NILFISK ADVANCE TERRA 3700B] BATTERY POWERED RIDER FLOOR SWEEPER - PARTS - MANUFACTURER: ADVANCE MODEL: TERRA 3700B CONDITION: FOR PARTS OR NOT WORKING. COMES IN NON-ORIGINAL PACKAGING. THIS FLOOR SWEEPER HAS SCUFFS, SCRAPES, AND RESIDUE FROM PREVIOUS USE AS WELL AS THE SEAT BEING TORN IN SEVERAL PLACES. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS FLOOR SWEEPER DOES NOT TURN ON AND IS BROKEN, IT IS BEING SOLD AS-IS FOR PARTS OR NOT WORKING. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) NILFISK ADVANCE TERRA 3700B 71.5 DBA BATTERY POWERED RIDER FLOOR SWEEPER AS/IS SPECIFICATIONS: MANUFACTURER: ADVANCE MODEL: TERRA 3700B DESCRIPTION: NILFISK ADVANCE TERRA 3700B 71.5 DBA BATTERY POWERED RIDER FLOOR SWEEPER FOR PARTS OR NOT WORKING CLEANING PATH: 37 INCHES 52,095 SQ. FT/HR BATTERY POWERED: (2) 12-VOLT BATTERIES ON A 24-VOLT SYSTEM + ONBOARD CHARGER. CAPACITY: 1.75 CUBIC FEET. SOUND LEVEL: 71.5 DBA. DOES NOT POWER ON FOR PARTS AS/IS SKU: W20G014 5G-13-03(1) 375LBS - 58IN X 42IN X 66IN

[NEW] POWERS 55314 1-1/4" C5 TRAK-IT STRAIGHT PINS (800) - MANUFACTURER: POWERS FASTENERS MODEL: 55314 CONDITION: NEW OTHER. COMES IN ORIGINAL PACKAGING. THESE PINS ARE NEW IN ORIGINAL OPEN-BOX PACKAGING WITH NO FUEL CELL. NOTE: THE EXPIRED FUEL CELL HAS BEEN REMOVED AND IS NOT INCLUDED. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (800) NEW POWERS 55314 1-1/4" C5 TRAK-IT STRAIGHT PINS NO FUEL CELL SPECIFICATIONS: MANUFACTURER: POWERS FASTENERS MODEL: 55314 DESCRIPTION: C5 TRAK-IT STRAIGHT PINS APPLICATION: 1-1/4" FIXTURE TO CONCRETE OR BLOCK PINS FOR C5 TRAK-IT GUN PIN LENGTH: 1-1/4" SHANK DIAMETER: 0.102" NO FUEL CELL SKU: Y02U019 4C-03-06(5) 7LBS - 10IN X 10IN X 7IN

AMI FB4560E36 36" EXCAVATOR V BUCKET ATTACHMENT CB-LINKAGE DIRECT PIN ON MANUFACTURER: AMI ATTACHMENTS MODEL: DIRECT PIN ON CONDITION: NEW OTHER. THIS BUCKET IS IN NEW AND UNUSED CONDITION. HOWEVER, THERE ARE SOME SCUFFS FROM BEING MOVED AROUND IN STORAGE (SEE PHOTOS). THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) AMI FB4560E36 DIRECT PIN ON 1.110 CUBIC YD 36" WIDTH EXCAVATOR V-BUCKET SPECIFICATIONS: MANUFACTURER: AMI ATTACHMENTS MODEL: DIRECT PIN ON PART NUMBER: FB4560E36CJ350DSCCBP DESCRIPTION: EXCAVATOR V-BUCKET COLOR: YELLOW WIDTH: 36" TEETH HARDWARE: CAT J350 DS CATEGORY: 250 MACHINE CLASS: 55,000 - 65,000 LBS CAPACITY: 1.110 CUBIC YD TEETH: 7 WEIGHT: 2,107 LBS. CB-LINKAGE SKU: X40G025 6-OUTSIDE(1) 2500LBS - 88IN X 66IN X 45IN

KORNIT ATLAS DTG 6 COLOR DIRECT TO GARMENT PRINTER 70-MACH-3963. DE-INSTALLED BY KORNIT. S/N - KORNIT AVALANCHE ATLAS DTG 6 COLOR DIRECT TO GARMENT PRINTER 70-MACH-3963. DE-INSTALLED BY KORNIT. S/N: 960-046

TIG STAR 13N11 #7 CERAMIC NOZZLE 7/16" 11MM (40) - MANUFACTURER: TIG STAR MODEL: 13N11 CONDITION: NEW OTHER. THESE NOZZLES ARE IN A NEW AND UNUSED COSMETIC CONDITION AND COME INDIVIDUALLY PACKAGED IN THE ORIGINAL TIG STAR BOXES OF 10 THAT DO SHOW SOME SIGNS OF SHELF WEAR AND OCCASIONALLY WRITING ON THE OUTSIDE OF THE BOX. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (40) TIG STAR 13N11 #7 CERAMIC NOZZLE 7/16" 11MM SPECIFICATIONS: MANUFACTURER: TIG STAR MODEL: 13N11 DESCRIPTION: CERAMIC TIG WELD GAS CUP NOZZLE #7 7/16" 11MM SKU: V03H008 2LBS - 6IN X 6IN X 4IN

SANDVIK COROMANT 5730564 DCMT21.51 PF 5015 CARBIDE TURNING INSERT (19) - MANUFACTURER: SANDVIK COROMANT MODEL: 5730564 CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THESE CARBIDE INSERTS WERE VERY SLIGHTLY USED AND CAREFULLY INSPECTED FOR FLAWS. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THESE CARBIDE INSERTS WERE VERY SLIGHTLY USED AND CAREFULLY INSPECTED FOR FLAWS. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (19) SANDVIK COROMANT 5730564 DCMT21.51 PF 5015 CARBIDE TURNING INSERT SPECIFICATIONS: MANUFACTURER: SANDVIK COROMANT MODEL: 5730564 ISO NO: DCMT 07 02 04-PF 5015 ANSI NO: DCMT 2(1.5)1-PF 5015 DESCRIPTION: DCMT21.51 PF 5015 CARBIDE TURNING INSERT INSCRIBED CIRCLE: 0.2500" (6.36MM) LENGTH: 0.2894" (7.35MM) THICKNESS: 0.0938" (2.38MM) CORNER RADIUS: 0.0156" (0.3969MM) COATING: UNCOATED MANUFACTURER'S GRADE: 5015 CHIP BREAKER: PF HOLE DIAMETER: 0.1102" (2.80MM) SKU: T05U014 2D-01-02(1)

[21075P000057] POWERGEAR P75L RIGHT-ANGLE GEARBOX - MANUFACTURER: MS-GRAESSNER GMBH POWERGEAR MODEL P75L GEARBOX ART. NR.: 21075P000057 HIGH PERFORMANCE, STANDARD BEVEL, VERSION P RATIO: 1:1 P75L 1,00:1 WA.123 V2 SHAFT ARRANGEMENT: WA 123 (RIGHT ANGLE OUTPUT, SHAFTS BOTH ENDS & BOTH SIDES) SHAFT DIAMETER: 16MM WITH 1 KEY SHAFT INTERNAL THREAD: M5 BODY SIZE: 75 MM CUBE OVERALL LENGTH: 240 MM OVERALL WIDTH: 168 MM NOMINAL TORQUE: 45 NM EMERGENCY STOP TORQUE RATING: 90 NM INPUT SPEED RATING: 2000 RPM MAXIMUM INPUT SPEED: 6500 RPM OUTPUT BACKLASH: < 15 ARCMIN PERMISSIBLE RADIAL LOAD: F1RMAX 900 N, F2RMAX 1100 N PERMISSIBLE AXIAL LOAD: F1AMAX 450 N, F2AMAX 550 N SERVICE LIFE: > 15000 HRS COMPACT AND RIGID DESIGN FRICTION-LOCKED FIT BETWEEN SHAFT AND BEVEL GEAR ENERGY-SAVING WITH 98% EFFICIENCY RATING HIGH TORQUE FOR SMALL/MEDIUM INPUT SPEED STURDY, RELIABLE, MAINTENANCE-FREE DESIGN RATED FOR USE IN HAZARDOUS ENVIRONMENTS

CONVEYOR TECHNOLOGIES PCB MAGAZINE LOADER AND UNLOADER WITH PREHEAT

[UNBRANDED] [ANSI 80] OFFSET ROLLER CHAIN REPLACEMENT LINKS. PITCH: 1" MAX ROLLER DIAMETER: 0.625" MINIMUM ULTIMATE TENSILE STRENGTH: 12,500 POUNDS MEASURING LOAD: 125 POUNDS. (10) UNBRANDED ANSI 80 OFFSET ROLLER CHAIN REPLACEMENT LINKS. CONDITION: NEW. COMES IN ORIGINAL PACKAGING. THE CHAIN LINKS ARE IN UNUSED CONDITION.

[ROACH CONVEYORS] [PRIMO SORT] [2 ROACH CONVEYOR PNEU/ELECTRIC BOX PUSHER PRIMO SORT &FRAME EXTD16" HISPD 75/MIN] SORTER: MANUFACTURER: ROACH CONVEYORS MODEL: PRIMO SORT HIGH SPEED: UP TO 75 SORTS PER MINUTE GREEN BASE: 57" X 12" CYLINDER: MANUFACTURER: PARKER 4MA SERIES ENVELOPE PRESSURE: 250 PSI AIR VALVE: MANUFACTURER: MAC MODEL: MV-A2B-A111-PM-591CA PUSHER: DIMENSIONS: 12" X 5" EXTENDS: 16" ELECTRICAL: +- 24VDC SINGLE SOLENOID 2 HALL EFFECT SENSORS AIR REGULATOR & FILTER: MANUFACTURER: SMC MODELS: AL30-N03-Z / AW30-N03-Z FRAME: APPROX. DIMENSIONS: 33" X 58" X 24"H

[TIG STAR TS57N74L] #8L CERAMIC GAS LENS NOZZLE 1/2" (40) - MANUFACTURER: TIG STAR MODEL: TS57N74L CONDITION: NEW OTHER. THESE NOZZLES ARE IN A NEW AND UNUSED COSMETIC CONDITION AND COME INDIVIDUALLY PACKAGED IN THE ORIGINAL TIG STAR BOXES OF 10 THAT DO SHOW SOME SIGNS OF SHELF WEAR AND OCCASIONALLY WRITING ON THE OUTSIDE OF THE BOX. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (40) TIG STAR TS57N74L #8L CERAMIC GAS LENS NOZZLE 1/2" SPECIFICATIONS: MANUFACTURER: TIG STAR MODEL: TS57N74L DESCRIPTION: CERAMIC TIG WELD GAS LENS CUP NOZZLE #8L 1/2" SKU: U51H028 4A-02-01(4) 7LBS - 10IN X 10IN X 10IN

CATIS SWIVEL TYPE LOCKING ROLLING CART INDUSTRIAL 3" CASTER WHEELS SWIVEL TYPE LOCKING WHEEL DIAMETER: 3" WHEEL WIDTH: 1 1/8" TOTAL HEIGHT: 4 1/4" SHAFT DIAMETER: 7/16 SHAFT LENGTH: 3/4" SKU: W24G001 (4) CATIS SWIVEL TYPE LOCKING ROLLING CART INDUSTRIAL 3" CASTER WHEELS

[4] PPI K.C. 4" SWIVEL LOCKING INDUSTRIAL STEEL ROLLING CASTER WHEELS - MANUFACTURER: PPI K.C. MODEL: UNKNOWN DESCRIPTION: LOCKING SWIVEL TYPE INDUSTRIAL STEEL 4" ROLLING CASTER WHEELS SWIVEL TYPE WHEEL DIAMETER: 4" WHEEL WIDTH: 1.25" TOTAL HEIGHT: 5". THE CASTERS ARE IN USED CONDITION WITH SCUFFS, SCRATCHES, AND SOME RESIDUE FROM PREVIOUS USE. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). THE CASTERS WERE REMOVED FROM DECOMMISSIONED MACHINES. THE WHEELS ROLL AND THE SWIVEL BASE WORKS AS INTENDED. NO FURTHER TESTING WAS PERFORMED AFTER REMOVAL.

[MARTIN SPROCKET] 50 BS40 1-1/2" BLACK STEEL FINISHED BORE SPROCKET SINGLE PITCH (2) - MANUFACTURER: MARTIN SPROCKET MODEL: 50 BS40 CONDITION: NEW OTHER. COMES IN NON-ORIGINAL PACKAGING. THE SPROCKETS ARE UNUSED. THERE IS MINOR SHELF-WEAR FROM PROLONGED STORAGE. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (2) MARTIN 50BS40 1 1/2" BLACK STEEL FINISHED BORE SPROCKET SINGLE PITCH SPECIFICATIONS: MANUFACTURER: MARTIN SPROCKET MODEL: 50BS40 FINISHED BORE SPROCKET CHAIN NO.:50 OUTSIDE DIAMETER: 8.316" FINISHED BORE: 1.5" LENGTH THROUGH BORE: 1.25" CHAIN PITCH: 5/8" KEYWAY SIZE: 3/8"X3/16" OUTSIDE DIAMETER: 8.316" HUB DIAMETER: 3.25" CONSTRUCTION MATERIAL: STEEL SPROCKET STYLE: B HUB LENGTH THROUGH: 0.907" PITCH DIAMETER: 7.9659" MADE IN USA

[L&I] LV533.1255 GENERAL PURPOSE STANDARD LENGTH CHUCKING REAMER (4) MANUFACTURER: L&I MODEL: LV533.1255 DESCRIPTION: GENERAL PURPOSE STANDARD LENGTH CHUCKING REAMER DIAMETER: 0.1255" FLUTE LENGTH: 7/8" OVERALL LENGTH: 3-1/3" SHANK DIAMETER: 0.119" FLUTE TYPE: STRAIGHT MATERIAL: HSS SKU: T49U014 1A-04-05-04(1) 0LBS - 6IN X 6IN X 4IN

[4] PACKING CASTER SWIVEL TYPE SMALL LOCKING ROLLING CASTER WHEELS (WHEEL DIAMETER: 2" WHEEL WIDTH: 1.25" TOTAL HEIGHT: 2.50" BASE DIMENSIONS: 2.50" BOLT HOLE WIDTH: 2")

[SCHAFFNER FN2070-10-07] POWER LINE FILTERS 110/250VAC / 50-60HZ. MANUFACTURER: SCHAFFNER MODEL: FN2070-10-07. THESE FILTERS ARE IN GOOD COSMETIC CONDITION WITH A FEW SCUFFS AND SCRATCHES FROM NORMAL USE. THESE FILTERS WERE PULLED FROM A WORKING SETUP THAT WAS BEING DECOMMISSIONED. INCLUDED: (2) SCHAFFNER FN2070-10-07 POWER LINE FILTERS SPECIFICATIONS: MANUFACTURER: SCHAFFNER MODEL: FN2070-10-07 VOLTAGE RATING: 250 VAC CURRENT RATING: 10 A MOUNTING STYLE: CHASSIS TERMINATION STYLE: WIRE LEADS LEAKAGE CURRENT: 400 UA FILTER TYPE: MULTI-STAGE FILTERS OPERATING FREQUENCY: 50 HZ, 60 HZ PACKAGING: TRAY SKU: Q22G032 1E-05-02(1) 7LBS - 8IN X 8IN X 4IN

(2) NEW 8" X 2.5" V-GROOVE CAST IRON INDUSTRIAL ROLLING CASTERS ZINC FINISH. MANUFACTURER: UNBRANDED MODEL: DOES NOT APPLY INDUSTRIAL ROLLING CASTERS DESIGN: FIXED BASE WHEEL STYLE: V-GROOVE WHEEL DIAMETER: 8" WHEEL WIDTH: 2.5" WHEEL MATERIAL: CAST IRON BASE MATERIAL: ANONDIZED STEEL BASE DIMENSIONS: 6.25" X 4.5" TOTAL MOUNTING HEIGHT: 10.125" FINISH: ZINC, SILVER COLOR. CONDITION: NEW OTHER. COMES IN NON-ORIGINAL PACKAGING. THE CASTERS ARE UNUSED. THERE ARE SCUFFS, SCRATCHES, AND SOME MINOR DINGS FROM PROLONGED STORAGE AND SHELF-WEAR.

[USED] VIBROMATIC 10" VIBRATORY BOWL FEEDER WITH BULK HOPPER AND DRIVE CONTROL H002. MANUFACTURER: VIBROMATIC. MODEL: V-600-8729. VIBRATORY BOWL FEEDER WITH BULK HOPPER AND ADJUSTABLE-SPEED DRIVE CONTROLLER. 10" BOWL SIZE. VERY HEAVY TABLE, APPROXIMATELY 22" X 18" X 1.25" THICK STEEL PLATE. ADJUSTABLE SPEED. VIBRATORY FEEDER: 10" BOWL MADE FOR FEEDING A 1/2" DIAMETER, 0.022" THICK WASHER. VIBROMATIC SELLS NEW/CUSTOM BOWLS FOR YOUR APPLICATION IF NECESSARY. AUTOMATICALLY SHUTS OFF IF THE OUTFEED CHUTE IS BLOCKED. DRIVE UNIT APPEARS TO BE WLPS-9 TYPE 2 ELECTROMAGNETIC COILS. SMALL PNEUMATIC ASSIST TO FEED INTO OUTFEED DROP CHUTE. USES BANNER Q45VR3FQ TO SENSE CHUTE OBSTRUCTIONS. BULK HOPPER. FEED FROM YOUR BULK SOURCE WHEN YOU NEED MORE PARTS THAN FEEDER CAN HOLD. LEVEL CONTROL STOPS HOPPER WHEN FEEDER HAS ACCEPTABLE LEVEL OF PARTS. DROPS PARTS ONTO SOFT SHEET, NOT HARD BOWL. USES BANNER Q60VR3AFV1000Q1 FOR LEVEL SENSING IN THE BOWL. CONTROLLER MODEL H002. INDEPENDENT POWER AND SPEED CONTROLS FOR HOPPER AND FEEDER. REPLACES 2G-1R AND 2G-2R. 120VAC POWER. WEIGHT: 330LBS. DIMENSIONS: 48IN X 40IN X 30IN.