Leading Rubber Plastics Machinery Dealer Closing its Warehouse PEBSCO LLC
Category: MISC
Total Lots:
232
Total Sales:
🔒 Subscribe
Lot Price Distribution
| Year | Make | Model | Lot Description | Hammer Price | |
|---|---|---|---|---|---|
|
WABASH | 100-12-2TMAC |
WABASH 100-12-2TMAC 100-TON VACUUM PRESS, WITH 12 X 12 BED, (2) 12 X 12 ELECTRIC PLATENS, 4,000 WATT, 460/3/60, VACUUM SYSTEM WITH AUTODOOR FEATURE, ATTACHED CONTROL PANEL WITH PLC, CYLINDER BORE & STROKE: 10 X 7, 10" WORKING DAYLIGHT & ADJUSTABLE UP TO 14", ATTACHED ROLL OUT TABLE: 18" X 40", WORK HEIGHT 41", 4-POST PRESS, 3 HP HYDRAULICS, ALL UNITIZED ON CABINET/BASE, 68" X 58" X 80" T, 6,200 LBS. S/N: 6660-5
|
🔒 Subscribe | |
|
|
GATTO | 12' DIFFERENTIAL PRESSURE CALIBRATOR TANK |
GATTO 12' DIFFERENTIAL PRESSURE CALIBRATOR TANK WITH 12.5" X 12" CROSS-SECTION, 42" CENTERLINE, 5.5" DIAMETER BULK HEAD OPENINGS, 3 HP BALDOR MOTOR, 230/460 VOLT, MANUAL ADJUSTMENTS-FRONT BACK, HEIGHT, SIDE TO SIDE, 178" L X 44" W X 56" H
|
🔒 Subscribe | |
|
|
WABASH | 100-12-2TMAC |
WABASH 100-12-2TMAC 100-TON VACUUM PRESS, WITH 12 X 12 BED, (2) 12 X 12 ELECTRIC PLATENS, 4,000 WATT, 460/3/60, VACUUM SYSTEM WITH AUTODOOR FEATURE, ATTACHED CONTROL PANEL WITH PLC, CYLINDER BORE & STROKE: 10 X 7, 10" WORKING DAYLIGHT & ADJUSTABLE UP TO 14", ATTACHED ROLL OUT TABLE: 18" X 40", WORK HEIGHT 41", 4-POST PRESS, 3 HP HYDRAULICS, ALL UNITIZED ON CABINET/BASE, 68" X 58" X 80" T, 6,200 LBS.
|
🔒 Subscribe | |
|
|
BAKER PERKINS | 2 HP LAB MIXER |
BAKER PERKINS 2 HP LAB MIXER WITH JACKETED BOWL, APPROX. 7.5" X 5.5" X 6", EXPLOSION PROOF MOTOR 2 HP, 220/440 VOLT, OPERATOR'S STOP START POD, MOUNTED ON STEEL CABINET TABLE (947) S/N: 42937
|
🔒 Subscribe | |
|
|
HOLMES | 29 |
HOLMES 29 HYDRAULIC BALE CUTTER WITH 29 BLADE, 24" STROKE, 5.5" CYLINDER, 2" CYLINDER ROD, 5 HP HYDRAULIC PUMP, 220/440 VOLT, ROLLER FEED (743)
|
🔒 Subscribe | |
|
|
NELMOR | G1220M1 |
NELMOR G1220M1 25 HP GRANULATOR, WITH 12 X 20 FEED OPENING, DELCO 25 HP AC MOTOR, ON CASTERS (846) S/N: 74-06-7252
|
🔒 Subscribe | |
|
|
WABASH | 30-15-2TMB |
WABASH 30-15-2TMB 30-TON HYDRAULIC PRESS, WITH (2) ELECTRIC 15 X 15 PLATENS, 17 BETWEEN POSTS LR X 8 BETWEEN POSTS FB, WORKING DAYLIGHT 10 ADJUSTABLE TO 16, WORK HEIGHT 46, 1 HP, 230/460/3/60 (950) S/N: 6883
|
🔒 Subscribe | |
|
|
1989 | PHI | 30-TON LAB HYDRAULIC PRESS |
1989 PHI 30-TON LAB HYDRAULIC PRESS WITH 30-TON GAUGE, (4) 18.5 X 12.5 ELECTRIC HEAT & WATER COOLED INSULATED PLATENS, STAINLESS STEEL PLUMBING, ATTACHED CONTROL PANEL WITH AUTO OPEN TIMER & TEMP CONTROLLERS, 120/1/60, 40 AMP, CABINET MOUNTED HAND PUMP TABLE MODEL, LAST USE: COMPOSITE HEAT SINK MOLDING (672) S/N: 89-8-018
|
🔒 Subscribe |
|
|
60" X 30" HYDRAULIC DIE CUTTER, WITH MOTORIZED CONVEYOR, ONBOARD CONTROL PANEL
|
🔒 Subscribe | |||
|
|
CARVER | 2699 |
CARVER 2699 30-TON 4-POST HYDRAULIC PRESS WITH (2) GROUND 12" X 12" ELECTRIC HEATED PLATENS, 4" DAYLIGHT, ADJUSTABLE TO 12", 44" WORK HEIGHT ON TABLE, NEW DIGITAL TEMPERATURE PLATEN CONTROL PANEL WITH DIGITAL BUZZER ALARM, NEW PRESSURE GAUGE, NEW WIRING, STEEL FABRICATED MOUNTING STAND, 240/1, 28" X 20", PALLETIZED AND WRAPPED FOR SHIPMENT S/N: 2699-132
|
🔒 Subscribe | |
|
|
1998 | PHI | 75R2424S-7 |
1998 PHI 75R2424S-7 75-TON HYDRAULIC PRESS S/N: WH100R WITH (7) 24 X 24 X 2" DOUBLE-CORED HEAT & COOLING PLATENS, 27" BETWEEN POSTS LEFT TO RIGHT, (4) 2.5" STRAIN RODS WITH FULLY GUIDED 5" BOLSTER, 30" TOTAL DAYLIGHT EMPTY, 18" STROKE, ATTACHED DIGITAL CONTROL PANEL, 1.5 HP MOTOR HYDRAULICS, 230 VOLT, 54" LR X 65" FB WITH 40" REMOVABLE STEAM VALVE ASSEMBLY X 75" T, 24" STEAM VALVE ASSEMBLY, 7,500 LBS. (792)
|
🔒 Subscribe |
|
|
SPADONE | 28 |
SPADONE 28 HYDRAULIC BALE CUTTER & PUMP, WITH HYDRAULIC HOSES INCLUDED, FULLY GUARDED, 28 BLADE, 24 STROKE, 6 X 30 CYLINDER, 2 BLADE SHAFT, 4 ROLLER FEED, 7.5 HP HYDRAULIC SYSTEM 220/440, AB DISCONNECT (623)
|
🔒 Subscribe | |
|
|
WABASH | 100-TON VACUUM MOLDING HYDRAULIC PRESS |
WABASH 100-TON VACUUM MOLDING HYDRAULIC PRESS WITH (5) 24 X 18 ELECTRIC HEAT WATER COOLED INSULATED PLATENS, (4) 3.5" DAYLIGHTS CURRENTLY, BETWEEN POSTS LR 48" X FB 28", BOLSTER & HEAD 5" THICK, (4) 3" STRAIN RODS, TDLO 33", WATTAGE DESCRIBED ON MFG. TAG, MINIMUM FAHRENHEIT TEMPERATURE 600, VACUUM & WATER MIST FEATURES, MOUNTED ALLEN BRADLEY ALL DIGITAL CONTROL CABINET WITH AMP METERS, 460/3/60 ELECTRICS, SELF-CONTAINED UNITIZED HYDRAULIC SYSTEM 5 HP, WORK HEIGHT 48", 93 W X 60 D X 94 T, WEIGHT 12,500 LBS.
|
🔒 Subscribe | |
|
|
BAKER PERKINS | DOUBLE ARM LAB SIGMA MIXER |
BAKER PERKINS DOUBLE ARM LAB SIGMA MIXER WITH Z-BLADES, JACKETED 80 PSI, LOCKING LID, TILT DISCHARGE, MOUNTED ON CABINET, 2 HP MOTOR 220/440V (524) S/N: 52785
|
🔒 Subscribe | |
|
|
5-CAN 84" X 30" S/S HEATING/COOLING CALENDER STAND, WITH (5) STAINLESS STEEL 200 PSI PRESSURIZED CANS, 388 F MAX TEMP, NATIONAL BOARD CODED WITH U STAMP, ROLLER BEARING MOUNTS WITH CHAIN SPROCKET DRIVE ASSEMBLY, 5 HP VARIDRIVE WITH CONTROL 230/460 VOLT WITH RPM TAC, ALL MOUNTED ON HEAVY DUTY BEAM FRAME, CURRENTLY DISMANTLED, 10.5 W X 12 T ASSEMBLED, APPROX. 10,000 LBS.
|
🔒 Subscribe | |||
|
|
HUNTER | 100-TON HYDRAULIC PRESS |
HUNTER 100-TON HYDRAULIC PRESS WITH (3) 20 X 18 ELECTRIC HEAT PLATENS, CONTROL CABINET, 440 VOLT, DIGITAL TEMPERATURE CONTROLLERS, PRESSURE GAUGE, CURE ALARM, 17 TDLO, 44 WORK HEIGHT, 4 BOLSTER, 5 HEAD, 3 DIAMETER RODS, 46 X 38 X 65, ADD 10 FOR CONTROL PANEL, CABINET MOUNTED HYDRAULIC SYSTEM (953-HH1)
|
🔒 Subscribe | |
|
|
JAYGO | 1-GALLON HIGH SPEED INTENSIVE MIXER (331) |
JAYGO 1-GALLON HIGH SPEED INTENSIVE MIXER (331)
|
🔒 Subscribe | |
|
|
PHI | P-215-C |
PHI P-215-C 20-TON HYDRAULIC LAB PRESS, S/N 7639, WITH (2) 8 X 8 ELECTRIC HEAT WATER COOLED PLATENS, 120 VOLT, 4 RAM, (1) 4 SPACER (949)
|
🔒 Subscribe | |
|
|
DAKE | 44-246 |
DAKE 44-246 25-TON HYDRAULIC PRESS WITH (2) 9 X 12 ELECTRIC HEAT WATER COOLED PLATENS, 3 5/8 RAM, TOTAL DAYLIGHT OPENING 12, WORKING DAYLIGHT 7, 115/1/60, HAND PUMP TABLE MODEL (675) S/N: 152478
|
🔒 Subscribe | |
|
|
EEMCO | 350-TON HYDRAULIC PRESS |
EEMCO 350-TON HYDRAULIC PRESS WITH 24 X 27 ELECTRIC PLATENS, DIGITAL TEMPERATURE CONTROLLERS WITH PLC, 460 VOLT, 110 VOLT CONTROLS, 18 RAM, 12 DAYLIGHT, (2) PUSH BACK ASSIST CYLINDERS, LOWER PLATEN SHUTTLE SYSTEM, STAND ALONE HYDRAULIC SYSTEM WITH ATTACHED OPERATORS CONTROL PANEL, SLAB SIDE CONSTRUCTION, ALL ON 1 PIECE STEEL DRIP PAN
|
🔒 Subscribe | |
|
|
CUMBERLAND | 6 ROTARY PLASTIC PELLETIZER |
CUMBERLAND 6 ROTARY PLASTIC PELLETIZER, KNIFE LENGTH 6.75, BOLT ON STYLE ROTOR, INFEED HEIGHT 1.25, INFEED WIDTH 6, 3 HP VS MOTOR, 220/440, 30 X 42, 1,800 LBS. (785) S/N: 26111-6446
|
🔒 Subscribe | |
|
|
MODERN 100-TON HYDRAULIC PRESS, WITH (2) 24 X 24 ELECTRIC HEAT WATER COOLED PLATENS, ATTACHED CONTROL PANEL, 25.5 BETWEEN POSTS LR, 21 TOTAL DAYLIGHT EMPTY, 11.5 WORKING DAYLIGHT WITH 2 SPACER, 5 THICK HEAD & 3 BOLSTER, (4) 3.5 STRAIN RODS, 55 WORK HEIGHT, 5 HP HYDRAULICS, 220/440 VOLT, SCHEMATICS, 40 FB X 55 LR, APPROX. 8,500 LBS.
|
🔒 Subscribe | |||
|
|
PHI | 3100RS024S-6HH0-X-XS8 |
PHI 3100RS024S-6HH0-X-XS8 100-TON LAMINATION PRESS, WITH (6) 30 X 24 ELECTRIC HEAT PLATENS, (5) 5" OPENINGS, HYDRAULIC SYSTEM, CONTROLS, MANUALS & SCHEMATICS, LAST USAGE: CIRCUIT BOARD, ALL MOUNTED ON UNITIZED STEEL BEAM FRAME, 15 FB X 64 W X 98 T, APPROX. 18,000 LBS.
|
🔒 Subscribe | |
|
|
16 X 30'' TWO-ROLL RUBBER MILL, S/N 1161 - 30'' TWO-ROLL RUBBER MILL, S/N 1161, WITH (2) CORED 16 X 30 ROLLS WITH 10 BEARINGS, END BELL WATER COOLING MOUNTS, 28 BETWEEN GUIDES WORKING SURFACE, STOCK GUIDES, HEAVY DUTY TOP CAP CONSTRUCTION, 8 CAPS, STANDARD ROLL ADJUSTMENT SCREWS, BULL GEAR & GEAR REDUCER DRIVE, NO MOTOR, WORN CON GEARS, 42 WORK HEIGHT, ALL MOUNTED ON 9 STEEL I BEAM, MILL DIM. ONLY 80 LEFT TO RIGHT X FRONT TO BACK 60, LEFT TO RIGHT 12 X FRONT TO BACK 83 BASE (758)
|
🔒 Subscribe | |||
|
|
SPADONE | 26" |
SPADONE 26" BALE CUTTER WITH 6 X 29 HYDRAULIC CYLINDER, 2 SHAFT X 29, 26 BLADE MOUNT BLADE MISSING, ROLLER FEED TABLE, NO PUMP (677)
|
🔒 Subscribe | |
|
|
CLIFTON | 500 |
CLIFTON 500 150-TON HYDRAULIC COMPOSITE MOLDING PRESS & PUMP, S/N 823, WITH (2) 24 X 24 X 3 ELECTRIC HEAT PLATENS, ADJUSTABLE DAYLIGHT, 8 STROKE, FULLY GUIDED BOLSTER, HYDRAULIC PUSH BACKS MOUNTED, STAND ALONE 5 HP HYDRAULIC SYSTEM, 2,000 PSI WITH ATTACHED OPERATOR'S CONTROL PANEL, 230 VOLT, PREVIOUS OWNER/USAGE: NASA COMPOSITE MATERIAL DEVELOPMENT, PRESS 36 X 50 X 78, APPROX. 6,500 LBS., PUMP 62 X 31 X 69, APPROX. 1,800 LBS.
|
🔒 Subscribe | |
|
|
ANDERSON | VF-1 |
ANDERSON VF-1 VACUUM FORMER WITH PORTABLE PLASTIC ROLL PAY OFF STAND. SHIPPING DIM: 3,500 LBS. (2) PIECES, 95 FB X 68 LR X 55 T (534). S/N: 101
|
🔒 Subscribe | |
|
|
TMP | 100-TON HYDRAULIC PRESS |
TMP 100-TON HYDRAULIC PRESS WITH TDLO 20.75, 22 BETWEEN POSTS, RAM APPROX. 7, 6 REMOVABLE SPACER, DESIGNED FOR 20 X 20 PLATENS, BOLSTER 22 LR X 20 FB, BETWEEN POSTS 12, BOLSTER 6 FULLY GUIDED, 3 RODS, HEAD 7, FLOOR TO BOLSTER 40, LR 45 INCLUDING ATTACHED CONTROL PANEL, FB 36, MOUNTED HYDRAULIC POWER UNIT, S/N: 954-TMPC2
|
🔒 Subscribe | |
|
|
TMP | 100-TON HYDRAULIC PRESS |
TMP 100-TON HYDRAULIC PRESS WITH TDLO 20.75, 22 BETWEEN POSTS, RAM APPROX. 7, 6 REMOVABLE SPACER, DESIGNED FOR 20 X 20 PLATENS, BOLSTER 22 LR X 20 FB, BETWEEN POSTS 12, BOLSTER 6 FULLY GUIDED, 3 RODS, HEAD 7, FLOOR TO BOLSTER 40, LR 45 INCLUDING ATTACHED CONTROL PANEL, FB 36, MOUNTED HYDRAULIC POWER UNIT, S/N: 954-TMPC1
|
🔒 Subscribe | |
|
|
MONSANTO | MOONEY VISCOMETER |
MONSANTO MOONEY VISCOMETER, TECH PRO COMPUGRAPH RECORDER, DIGITAL TEMPERATURE CONTROLLERS
|
🔒 Subscribe | |
|
|
RELIABLE 314-TON HYDRAULIC PRESS & PUMP, WITH (2) 36 X 36 X 2.25 ELECTRIC HEAT PLATENS, 480 VOLT, SEPARATE ALLEN-BRADLEY DIGITAL CONTROL PANEL WITH DISCONNECT, 28.25 DAYLIGHT OPENING, (4) 5.5 STRAIN RODS, 17 THICK HEAD, 7.5 BOLSTER, 50 WORK HEIGHT, 20 DIAMETER RAM X 20 STROKE, 10 HP HYDRAULIC POWER PACK WITH 150-GAL RESERVOIR & HOSES, GEN DIM. 35 X 55 X 112T, PRESS WEIGHT 15,000 LBS. PLUS 2,500 LBS. MISC., NOTE: SOME CRACKS ON RAM POT AREA
|
🔒 Subscribe | |||
|
|
RDN | 230-6 INTELLIPULLER |
RDN 230-6 INTELLIPULLER 6'' FLAT BELT EXTRUSION PULLER S/N: 38241, WITH 6 X 30 WORKING FLAT BELT, ATTACHED OPERATOR'S CONTROL PANEL, 42 CURRENT CENTER LINE, 3 HP DC MOTOR DRIVE, 30 X 54 (813)
|
🔒 Subscribe | |
|
|
METAPLAST | PB4-C |
METAPLAST PB4-C 3.5" X 24" EXTRUSION PULLER, S/N: 585080, WITH (2) 3.5 X 24 SMOOTH BELTS (589)
|
🔒 Subscribe | |
|
|
BAKER PERKINS |
BAKER PERKINS HIGH SPEED MIXER WITH STAINLESS STEEL MIXING CHAMBER, 50/60 HP, NO CONTROLS, 4,000 LBS., MIXER DIM: 60 T X 40 FRONT TO BACK X 97 LR, BASE TABLE DIM: 30 X 30 T
|
🔒 Subscribe | ||
|
|
265-TON HYDRAULIC PRESS, PUMP & LIFT TABLE, WITH (2) 22 X 30 X 2.25 ELECTRIC HEAT PLATENS, LEFT TO RIGHT BETWEEN POSTS 25, BOLSTER 25 X 30 X 3.5, 15 RAM X 16 STROKE RATED 3,000 PSI, TOTAL DAYLIGHT EMPTY ADJUSTABLE TO 16, (4) 4.5 STRAIN RODS, 6 HEAD, FLOOR TO BOLSTER 33 WORK HEIGHT, 38 LR X 30 FB X 65 T, APPROX. 8,800 LBS., 10 HP RACINE HYDRAULIC POWER PACK, 10 HP GE MOTOR, 230/460/3/60, 3,000 PSI PUMP BY RACINE, 36 X 24 X 20 TANK, APPROX. 1,500 LBS., HYDRAULIC LIFT TABLE, LAST USAGE: RUBBER MOLDING (773)
|
🔒 Subscribe | |||
|
|
RDN | 3'' X 18'' PULLER CUTTER COMBO |
RDN 3'' X 18'' PULLER CUTTER COMBO, WITH 3'' X 18'' BELTS, CONTROL, ON CASTERS (812)
|
🔒 Subscribe | |
|
|
HUNTER | 100-TON HYDRAULIC PRESS |
HUNTER 100-TON HYDRAULIC PRESS (3) 20 X 18 ELECTRIC HEAT PLATENS, CONTROL CABINET, 440 VOLT, DIGITAL TEMPERATURE CONTROLLERS, PRESSURE GAUGE, CURE ALARM, 17 TDLO, 44 WORK HEIGHT, 4 BOLSTER, 5 HEAD, 3 DIAMETER RODS, 46 X 38 X 65, ADD 10 FOR CONTROL PANEL, CABINET MOUNTED HYDRAULIC SYSTEM (953-HH2)
|
🔒 Subscribe | |
|
|
1990 |
1990 24" X 8" VERTICAL TWO-ROLL LAB SILICONE RUBBER CALENDER WITH (2) 24 X 8 CORED ROLLS, INBOARD OUTBOARD CONTAMINATION SEALS, DRIP PAN, TYPE GEARS, ADJUSTABLE STOCK GUIDES, TRANSPARENT PNEUMATIC SAFETY GLASS GUARD, ATTACHED OPERATORS CONTROL PANEL, VARIABLE SPEED GEARHEAD MOTOR DRIVE ASSEMBLY, 5.5 KW, 220 VOLT, CABINET MOUNTED, APPROX. 5,000 LBS., 70" X 36" X 90"
|
🔒 Subscribe | ||
|
|
MAREN | 111 |
25" X 30" HORIZONTAL BALER, S/N: 976324, WITH 20 HP
|
🔒 Subscribe | |
|
|
2012 | RHM FLUID POWER | 10 HP VICKERS HYDRAULIC SYSTEM |
2012 RHM FLUID POWER 10 HP VICKERS HYDRAULIC SYSTEM, S/N: RHM-60-JC26108, WITH 60-GALLON RESERVOIR, MAX SYS. DESIGN 2,300 PSI, REFER TO SPEC TAG PHOTOS, 10 HP MOTOR BY MAX PE: 230/460, EATON CONTROL PANEL ATTACHED (712)
|
🔒 Subscribe |
|
|
1985 | PHI | 50-TON LAB HYDRAULIC PRESS |
1985 PHI 50-TON LAB HYDRAULIC PRESS, S/N: 85-6-026, WITH (2) 18.5 X 12.5 OIL HEAT PLATENS, 50-TON CAPACITY, 240/3, WORKING DAYLIGHT 4/10 WITH SPACER REMOVED, 43" LR X 28 FB X 60 T OVERALL (320)
|
🔒 Subscribe |
|
|
HUNTER | 100-TON HYDRAULIC PRESS |
HUNTER 100-TON HYDRAULIC PRESS WITH 22 X 18 FB GUIDED BOLSTER, 3 RODS, APPROX. 18 ADJUSTABLE, WORKING DAYLIGHT 14 APPROX., 42 WORK HEIGHT, 40 X 38 FB, MOUNTED HYDRAULIC UNIT, 480 VOLT, 3,000 PSI GAUGE (S/N: 953-HC3)
|
🔒 Subscribe | |
|
|
PHI | 50-TON HYDRAULIC PRESS |
PHI 50-TON HYDRAULIC PRESS WITH (2) 18.5 X 18.5 ELECTRIC HEAT WATER-COOLED PLATENS, 12 WORKING DAYLIGHT, 6.75 RAM, 39 WORK HEIGHT, TABLE MODEL HAND PUMP PRESS, CABINET MOUNTED PUMP SYSTEM (957)
|
🔒 Subscribe | |
|
|
140-TON HYDRAULIC LAMINATION PRESS, WITH (3) 60 X 24 CORED FOR FLUID HEAT OR COOL PLATENS, (2) 6 WORKING DAYLIGHT OPENINGS, (2) 4 SPACERS, 45 WORK HEIGHT, 62 BETWEEN PLATEN HANGERS, TOTAL DAYLIGHT OPENING EMPTY 16, (2) 7 RAMS, OPERATED AT 1,800 PSI 2 HP HYDRAULIC PUMP MOTORS, 220/3 PER PRESS, OPERATORS CONTROL PANELS ATTACHED, LAST USE: LAMINATION OF PRINTED CIRCUIT BOARDS, 90 X 26 X 95 T, APPROX. 10,000 LBS.
|
🔒 Subscribe | |||
|
|
PHI | 75-TON HYDRAULIC PRESS |
PHI 75-TON HYDRAULIC PRESS WITH 6.5" RAM, TOTAL DAYLIGHT OPENING 13" WITH ADDITIONAL 4 REMOVABLE SPACER, 18.5 X 18.5 BED AREA, ATTACHED CONTROL PANEL, ELECTRICS 480 VOLT/110 VOLT, ATTACHED HYDRAULIC SYSTEM, 40" X 36" X 76", PREVIOUS USAGE: ELECTRICALLY HEATING MOLD FOR RUBBER & PLASTICS (953)
|
🔒 Subscribe | |
|
|
ST. LAWRENCE | 62-66 75-TON HYDRAULIC PRESS |
ST. LAWRENCE 62-66 75-TON HYDRAULIC PRESS WITH 29 X 20 GUIDED BOLSTER, 49 WORK HEIGHT, 22 TOTAL DAYLIGHT EMPTY, 20 BETWEEN POSTS LR, ATTACHED CONTROL PANEL WITH DIGITAL TEMPERATURE CONTROLLERS FOR WIRING A 2-PIECE MOLD OR PLATENS, 208 VOLT, 2.5 STRAIN RODS, SAFETY GLASS-DOOR ENCLOSURE, REXROTH HYDRAULIC SYSTEM, PREVIOUS USAGE: ELECTRICALLY HEATED MOLDS PLASTIC, 65 LR X 42 FB X 80 T, 4,800 LBS. S/N: 3957-3
|
🔒 Subscribe | |
|
|
NRM | 12 |
NRM 12 THREE-ROLL EXTRUSION SHEET STACK, WITH (3) CHROMED ROLLS, 12'' X 4'' WITH ROTARY UNIONS, 10'' PULL ROLLS, CRATED SPARE ROLLS, MANUALS, ATTACHED PULL ROLL STAND WITH WIND UP, DUAL VARIABLE SPEED MOTORS FOR STACK & PULL ROLL, ATTACHED OPERATOR CONTROL STATION, ON CASTERS, MATERIAL RAN PPE (892)
|
🔒 Subscribe | |
|
|
PHI | 50-TON HAND PUMP TABLE MODEL PRESS |
PHI 50-TON HAND PUMP TABLE MODEL PRESS WITH (2) 12.5 X 12.5 ELECTRIC HEAT, WATER COOLED PLATENS, WATER FLOOD VALVE, 9 OPENING, 19 WORK HEIGHT, ATTACHED DISCONNECT BOX BY SQUARE D, 240 VOLT, 30 AMP, RAM 5.75 AT 5,000 PSI, WITH DUMP RELEASE VALVE, 21 LR X 18 FB X 41 T (962) S/N: 5144
|
🔒 Subscribe | |
|
|
PHI | S70-253C-Y3 |
PHI S70-253C-Y3 70-TON HYDRAULIC PRESS, WITH (2) 18.5 X 18.5 ELECTRIC HEAT WATER COOLED PLATENS WITH MOUNTED TABLE S/N: 4897
|
🔒 Subscribe | |
|
|
IMS | LP-144-3 MH |
IMS LP-144-3 MH 10 HP INSULATED GRANULATORS, S/N LP1443MH0493/LP1443MH0492, WITH SOUND PROOF ENCLOSURES, ATTACHED CONTROL PANELS, ON CASTERS, 460/3/60, 1,500 LBS. EACH
|
🔒 Subscribe |
WABASH 100-12-2TMAC
PRESSES & FORMING
WABASH 100-12-2TMAC 100-TON VACUUM PRESS, WITH 12 X 12 BED, (2) 12 X 12 ELECTRIC PLATENS, 4,000 WATT...
Hammer Price:
🔒
GATTO 12' DIFFERENTIAL PRESSURE CALIBRATOR TANK
MISC
GATTO 12' DIFFERENTIAL PRESSURE CALIBRATOR TANK WITH 12.5" X 12" CROSS-SECTION, 42" CENTERLINE, 5.5"...
Hammer Price:
🔒
WABASH 100-12-2TMAC
PRESSES & FORMING
WABASH 100-12-2TMAC 100-TON VACUUM PRESS, WITH 12 X 12 BED, (2) 12 X 12 ELECTRIC PLATENS, 4,000 WATT...
Hammer Price:
🔒
BAKER PERKINS 2 HP LAB MIXER
CHEMICAL PROCESSING EQUIPMENT
BAKER PERKINS 2 HP LAB MIXER WITH JACKETED BOWL, APPROX. 7.5" X 5.5" X 6", EXPLOSION PROOF MOTOR 2 H...
Hammer Price:
🔒
HOLMES 29
MISC
HOLMES 29 HYDRAULIC BALE CUTTER WITH 29 BLADE, 24" STROKE, 5.5" CYLINDER, 2" CYLINDER ROD, 5 HP HYDR...
Hammer Price:
🔒
NELMOR G1220M1
PLASTICS PROCESSING EQUIPMENT
NELMOR G1220M1 25 HP GRANULATOR, WITH 12 X 20 FEED OPENING, DELCO 25 HP AC MOTOR, ON CASTERS (846) S...
Hammer Price:
🔒
WABASH 30-15-2TMB
PRESSES & FORMING
WABASH 30-15-2TMB 30-TON HYDRAULIC PRESS, WITH (2) ELECTRIC 15 X 15 PLATENS, 17 BETWEEN POSTS LR X 8...
Hammer Price:
🔒
1989 PHI 30-TON LAB HYDRAULIC PRESS
PRESSES & FORMING
1989 PHI 30-TON LAB HYDRAULIC PRESS WITH 30-TON GAUGE, (4) 18.5 X 12.5 ELECTRIC HEAT & WATER COOLED ...
Hammer Price:
🔒
PRESSES & FORMING
60" X 30" HYDRAULIC DIE CUTTER, WITH MOTORIZED CONVEYOR, ONBOARD CONTROL PANEL...
Hammer Price:
🔒
CARVER 2699
PRESSES & FORMING
CARVER 2699 30-TON 4-POST HYDRAULIC PRESS WITH (2) GROUND 12" X 12" ELECTRIC HEATED PLATENS, 4" DAYL...
Hammer Price:
🔒
1998 PHI 75R2424S-7
PRESSES & FORMING
1998 PHI 75R2424S-7 75-TON HYDRAULIC PRESS S/N: WH100R WITH (7) 24 X 24 X 2" DOUBLE-CORED HEAT & COO...
Hammer Price:
🔒
SPADONE 28
MISC
SPADONE 28 HYDRAULIC BALE CUTTER & PUMP, WITH HYDRAULIC HOSES INCLUDED, FULLY GUARDED, 28 BLADE, 24 ...
Hammer Price:
🔒
WABASH 100-TON VACUUM MOLDING HYDRAULIC PRESS
PRESSES & FORMING
WABASH 100-TON VACUUM MOLDING HYDRAULIC PRESS WITH (5) 24 X 18 ELECTRIC HEAT WATER COOLED INSULATED ...
Hammer Price:
🔒
BAKER PERKINS DOUBLE ARM LAB SIGMA MIXER
PLASTICS PROCESSING EQUIPMENT
BAKER PERKINS DOUBLE ARM LAB SIGMA MIXER WITH Z-BLADES, JACKETED 80 PSI, LOCKING LID, TILT DISCHARGE...
Hammer Price:
🔒
MISC
5-CAN 84" X 30" S/S HEATING/COOLING CALENDER STAND, WITH (5) STAINLESS STEEL 200 PSI PRESSURIZED CAN...
Hammer Price:
🔒
HUNTER 100-TON HYDRAULIC PRESS
PRESSES & FORMING
HUNTER 100-TON HYDRAULIC PRESS WITH (3) 20 X 18 ELECTRIC HEAT PLATENS, CONTROL CABINET, 440 VOLT, DI...
Hammer Price:
🔒
JAYGO 1-GALLON HIGH SPEED INTENSIVE MIXER (331)
MISC
JAYGO 1-GALLON HIGH SPEED INTENSIVE MIXER (331)...
Hammer Price:
🔒
PHI P-215-C
PRESSES & FORMING
PHI P-215-C 20-TON HYDRAULIC LAB PRESS, S/N 7639, WITH (2) 8 X 8 ELECTRIC HEAT WATER COOLED PLATENS,...
Hammer Price:
🔒
DAKE 44-246
PRESSES & FORMING
DAKE 44-246 25-TON HYDRAULIC PRESS WITH (2) 9 X 12 ELECTRIC HEAT WATER COOLED PLATENS, 3 5/8 RAM, TO...
Hammer Price:
🔒
EEMCO 350-TON HYDRAULIC PRESS
PRESSES & FORMING
EEMCO 350-TON HYDRAULIC PRESS WITH 24 X 27 ELECTRIC PLATENS, DIGITAL TEMPERATURE CONTROLLERS WITH PL...
Hammer Price:
🔒
CUMBERLAND 6 ROTARY PLASTIC PELLETIZER
PLASTICS PROCESSING EQUIPMENT
CUMBERLAND 6 ROTARY PLASTIC PELLETIZER, KNIFE LENGTH 6.75, BOLT ON STYLE ROTOR, INFEED HEIGHT 1.25, ...
Hammer Price:
🔒
PRESSES & FORMING
MODERN 100-TON HYDRAULIC PRESS, WITH (2) 24 X 24 ELECTRIC HEAT WATER COOLED PLATENS, ATTACHED CONTRO...
Hammer Price:
🔒
PHI 3100RS024S-6HH0-X-XS8
PRESSES & FORMING
PHI 3100RS024S-6HH0-X-XS8 100-TON LAMINATION PRESS, WITH (6) 30 X 24 ELECTRIC HEAT PLATENS, (5) 5" O...
Hammer Price:
🔒
MISC
16 X 30'' TWO-ROLL RUBBER MILL, S/N 1161 - 30'' TWO-ROLL RUBBER MILL, S/N 1161, WITH (2) CORED 16 X ...
Hammer Price:
🔒
SPADONE 26"
MISC
SPADONE 26" BALE CUTTER WITH 6 X 29 HYDRAULIC CYLINDER, 2 SHAFT X 29, 26 BLADE MOUNT BLADE MISSING, ...
Hammer Price:
🔒
CLIFTON 500
PRESSES & FORMING
CLIFTON 500 150-TON HYDRAULIC COMPOSITE MOLDING PRESS & PUMP, S/N 823, WITH (2) 24 X 24 X 3 ELECTRIC...
Hammer Price:
🔒
ANDERSON VF-1
MISC
ANDERSON VF-1 VACUUM FORMER WITH PORTABLE PLASTIC ROLL PAY OFF STAND. SHIPPING DIM: 3,500 LBS. (2) P...
Hammer Price:
🔒
TMP 100-TON HYDRAULIC PRESS
PRESSES & FORMING
TMP 100-TON HYDRAULIC PRESS WITH TDLO 20.75, 22 BETWEEN POSTS, RAM APPROX. 7, 6 REMOVABLE SPACER, DE...
Hammer Price:
🔒
TMP 100-TON HYDRAULIC PRESS
PRESSES & FORMING
TMP 100-TON HYDRAULIC PRESS WITH TDLO 20.75, 22 BETWEEN POSTS, RAM APPROX. 7, 6 REMOVABLE SPACER, DE...
Hammer Price:
🔒
MONSANTO MOONEY VISCOMETER
MISC
MONSANTO MOONEY VISCOMETER, TECH PRO COMPUGRAPH RECORDER, DIGITAL TEMPERATURE CONTROLLERS...
Hammer Price:
🔒
PRESSES & FORMING
RELIABLE 314-TON HYDRAULIC PRESS & PUMP, WITH (2) 36 X 36 X 2.25 ELECTRIC HEAT PLATENS, 480 VOLT, SE...
Hammer Price:
🔒
RDN 230-6 INTELLIPULLER
MISC
RDN 230-6 INTELLIPULLER 6'' FLAT BELT EXTRUSION PULLER S/N: 38241, WITH 6 X 30 WORKING FLAT BELT, AT...
Hammer Price:
🔒
METAPLAST PB4-C
PLASTICS PROCESSING EQUIPMENT
METAPLAST PB4-C 3.5" X 24" EXTRUSION PULLER, S/N: 585080, WITH (2) 3.5 X 24 SMOOTH BELTS (589)...
Hammer Price:
🔒
BAKER PERKINS
MISC
BAKER PERKINS HIGH SPEED MIXER WITH STAINLESS STEEL MIXING CHAMBER, 50/60 HP, NO CONTROLS, 4,000 LBS...
Hammer Price:
🔒
PRESSES & FORMING
265-TON HYDRAULIC PRESS, PUMP & LIFT TABLE, WITH (2) 22 X 30 X 2.25 ELECTRIC HEAT PLATENS, LEFT TO R...
Hammer Price:
🔒
RDN 3'' X 18'' PULLER CUTTER COMBO
MISC
RDN 3'' X 18'' PULLER CUTTER COMBO, WITH 3'' X 18'' BELTS, CONTROL, ON CASTERS (812)...
Hammer Price:
🔒
HUNTER 100-TON HYDRAULIC PRESS
PRESSES & FORMING
HUNTER 100-TON HYDRAULIC PRESS (3) 20 X 18 ELECTRIC HEAT PLATENS, CONTROL CABINET, 440 VOLT, DIGITAL...
Hammer Price:
🔒
1990
MISC
1990 24" X 8" VERTICAL TWO-ROLL LAB SILICONE RUBBER CALENDER WITH (2) 24 X 8 CORED ROLLS, INBOARD OU...
Hammer Price:
🔒
MAREN 111
MATERIAL HANDLING & WAREHOUSE EQUIPMENT
25" X 30" HORIZONTAL BALER, S/N: 976324, WITH 20 HP...
Hammer Price:
🔒
2012 RHM FLUID POWER 10 HP VICKERS HYDRAULIC SYSTEM
MISC
2012 RHM FLUID POWER 10 HP VICKERS HYDRAULIC SYSTEM, S/N: RHM-60-JC26108, WITH 60-GALLON RESERVOIR, ...
Hammer Price:
🔒
1985 PHI 50-TON LAB HYDRAULIC PRESS
PRESSES & FORMING
1985 PHI 50-TON LAB HYDRAULIC PRESS, S/N: 85-6-026, WITH (2) 18.5 X 12.5 OIL HEAT PLATENS, 50-TON CA...
Hammer Price:
🔒
HUNTER 100-TON HYDRAULIC PRESS
PRESSES & FORMING
HUNTER 100-TON HYDRAULIC PRESS WITH 22 X 18 FB GUIDED BOLSTER, 3 RODS, APPROX. 18 ADJUSTABLE, WORKIN...
Hammer Price:
🔒
PHI 50-TON HYDRAULIC PRESS
PRESSES & FORMING
PHI 50-TON HYDRAULIC PRESS WITH (2) 18.5 X 18.5 ELECTRIC HEAT WATER-COOLED PLATENS, 12 WORKING DAYLI...
Hammer Price:
🔒
PRESSES & FORMING
140-TON HYDRAULIC LAMINATION PRESS, WITH (3) 60 X 24 CORED FOR FLUID HEAT OR COOL PLATENS, (2) 6 WOR...
Hammer Price:
🔒
PHI 75-TON HYDRAULIC PRESS
PRESSES & FORMING
PHI 75-TON HYDRAULIC PRESS WITH 6.5" RAM, TOTAL DAYLIGHT OPENING 13" WITH ADDITIONAL 4 REMOVABLE SPA...
Hammer Price:
🔒
ST. LAWRENCE 62-66 75-TON HYDRAULIC PRESS
PRESSES & FORMING
ST. LAWRENCE 62-66 75-TON HYDRAULIC PRESS WITH 29 X 20 GUIDED BOLSTER, 49 WORK HEIGHT, 22 TOTAL DAYL...
Hammer Price:
🔒
NRM 12
MISC
NRM 12 THREE-ROLL EXTRUSION SHEET STACK, WITH (3) CHROMED ROLLS, 12'' X 4'' WITH ROTARY UNIONS, 10''...
Hammer Price:
🔒
PHI 50-TON HAND PUMP TABLE MODEL PRESS
PRESSES & FORMING
PHI 50-TON HAND PUMP TABLE MODEL PRESS WITH (2) 12.5 X 12.5 ELECTRIC HEAT, WATER COOLED PLATENS, WAT...
Hammer Price:
🔒
PHI S70-253C-Y3
PRESSES & FORMING
PHI S70-253C-Y3 70-TON HYDRAULIC PRESS, WITH (2) 18.5 X 18.5 ELECTRIC HEAT WATER COOLED PLATENS WITH...
Hammer Price:
🔒
IMS LP-144-3 MH
PLASTICS PROCESSING EQUIPMENT
IMS LP-144-3 MH 10 HP INSULATED GRANULATORS, S/N LP1443MH0493/LP1443MH0492, WITH SOUND PROOF ENCLOSU...
Hammer Price:
🔒