Leading Rubber Plastics Machinery Dealer Closing its Warehouse PEBSCO LLC
Category: MISC
Total Lots:
232
Total Sales:
🔒 Subscribe
Price Distribution
| Year | Make | Model | Lot Description | Hammer Price | |
|---|---|---|---|---|---|
|
INSTRON | 1101 |
INSTRON 1101 TENSIOMETER TENSILE TESTER S/N: 2530, WITH CHART RECORDER, INSTRON UP TO 50 LB. LOAD CELL, S/N: 568 (221)
|
🔒 Subscribe | |
|
|
2000 |
2000 LOT OF (3) 24" X 24" X 3" ELECTRIC PLATENS WITH CARTRIDGE TYPE HEATERS, 220 VOLT S/N: 948
|
🔒 Subscribe | ||
|
|
SCOTT | L4 |
SCOTT L4 TENSILE TESTER WITH CHART RECORDER, JAWS, MOTORIZED (530) S/N: C37002
|
🔒 Subscribe | |
|
|
AMSCO |
AMSCO STEAM STERILIZER/VULCANIZER, WITH CONTROLS, ELECTRICALLY HEATED STEAM GENERATOR, WATER PUMP, HIGH/LOW PRESSURE SAFETY SYSTEM, 280 DEG. F MAX. LAST USED TEXTILE PROCESSING
|
🔒 Subscribe | ||
|
|
60-TON HYDRAULIC PRESS BANK, WITH (6) 18 LR X 21 FB ELECTRIC PLATENS TOTAL, (2) 7 OPENINGS PER PRESS, 20 BETWEEN SLAB SIDES, 5.5 THICK BOLSTER, 8 THICK HEAD, 38 WORK HEIGHT, 20 TDLO, 5.5 DOUBLE ACTING CYLINDERS X 9 STROKE, 2 OF 3 ARE DOUBLE OPENING, 84 LR X 30 D X 74 T, APPROX. 8,000 LBS.
|
🔒 Subscribe | |||
|
|
EDI | 54'' STRAND DIE 124 HOLE |
EDI 54'' STRAND DIE 124 HOLE, WITH 124-HOLE DIE, HAS REPLACEABLE DIE PLATE, 4 BACK CENTER FEED, ELECTRICALLY HEATED BODY (584)
|
🔒 Subscribe | |
|
|
BARWELL | COLLECT O COOL TANK SYSTEM (906) |
BARWELL COLLECT O COOL TANK SYSTEM (906)
|
🔒 Subscribe | |
|
|
PHI | SP214-C-M2-D |
PHI SP214-C-M2-D 20-TON HYDRAULIC PRESS, S/N 82-6-019, WITH (2) 8 X 8 ELECTRIC HEAT WATER COOLED PLATENS, ATTACHED CONTROL PANEL WITH NEW TEMPERATURE CONTROLLERS, ALL NEW WIRING, 0 - 500 F, 240/3/60, 12 DAYLIGHT X 8 STROKE X 4 RAM, 40 WORK HEIGHT, 1.5 HP HYDRAULIC SYSTEM WITH MANUAL PRESSURE ADJUSTMENT HAND VALVE, POWER DISCONNECT, 34 X 20 X 51, 1,400 LBS. (740)
|
🔒 Subscribe | |
|
|
12'' AIR KNIFE, WITH 30-STRAND ROLLER GUIDES, 120/208 VOLT, 20 AMP, PORTABLE UNIT, APPROX. 300 LBS.
|
🔒 Subscribe | |||
|
|
FARREL | 13" TWO-ROLL SILICONE MILL |
FARREL 13" TWO-ROLL SILICONE MILL, S/N 62A975, WITH (2) 6 X 13 CHROME ROLLS, INBOARD SEALS, FLIP ADJUSTABLE GUIDES, REAR ROLL MATERIAL PLOW WITH TENSION, 6-WAY SAFETY SYSTEM, MICRO SET RATCHET ROLL ADJUSTMENT, FRONT & REAR OPERATOR STATION STOP START, MILL PAN, DUAL 5 HP VARIABLE SPEED VARIABLE FRICTION DRIVES, 0 - 60 RPM TACHOMETERS EACH ROLL, 220/440 VOLT MOTORS, CABINET STYLE (495)
|
🔒 Subscribe | |
|
|
QUADRUPLE CLEATED BELT PULLER SYSTEM 3.5" X 50" |
QUADRUPLE CLEATED BELT PULLER SYSTEM 3.5" X 50" - QUADRUPLE CLEATED BELT PULLER SYSTEM 3.5 X 50, WITH 4-SIDED 36" BELT PULLER, 6" LEFT TO RIGHT X 6" TOP TO BOTTOM BETWEEN BELTS (ADJUSTABLE OPENING), 9" FEED OPENING, CONTROLS, 3 HP MOTOR, 200 VOLT, 0 - 100 FPM (693)
|
🔒 Subscribe | ||
|
|
32' X 13" X 10" STAINLESS STEEL INSULATED WATER BATH - 32 X 13 X 10, 4 LIDS, STAINLESS STEEL, 2 INSULATED PER SIDE, ON CASTERS, 32'L X 27W
|
🔒 Subscribe | |||
|
|
32' X 13" X 10" STAINLESS STEEL INSULATED WATER BATH - 32 X 13 X 10, 4 LIDS, STAINLESS STEEL, 2 INSULATED PER SIDE, ON CASTERS, 32'L X 27W
|
🔒 Subscribe | |||
|
|
32' X 13" X 10" STAINLESS STEEL INSULATED WATER BATH - 32 X 13 X 10, 4 LIDS, STAINLESS STEEL, 2 INSULATED PER SIDE, ON CASTERS, 32'L X 27W
|
🔒 Subscribe | |||
|
|
32' X 13" X 10" STAINLESS STEEL INSULATED WATER BATH - 32 X 13 X 10, 4 LIDS, STAINLESS STEEL, 2 INSULATED PER SIDE, ON CASTERS, 32'L X 27W
|
🔒 Subscribe | |||
|
|
20' STAINLESS STEEL EXTRUSION WATER BATH, ON CASTERS (753)
|
🔒 Subscribe | |||
|
|
14' X 16" X 8" STAINLESS STEEL WATER BATH, ON CASTERS, 415 LBS.
|
🔒 Subscribe | |||
|
|
LOT OF (3) 40' COOLING TANKS, WITH WHEELED STANDS
|
🔒 Subscribe | |||
|
|
32' X 13" X 8" STAINLESS STEEL INSULATED WATER BATH - 32 X 13 X 8", 4 LIDS, STAINLESS STEEL, 2 INSULATED PER SIDE, ON CASTERS, 32'L X 27W
|
🔒 Subscribe | |||
|
|
32' X 13" X 8" STAINLESS STEEL INSULATED WATER BATH - 32 X 13 X 8", 4 LIDS, STAINLESS STEEL, 2 INSULATED PER SIDE, ON CASTERS, 32'L X 27W
|
🔒 Subscribe | |||
|
|
RELIANCE |
RUBBER SLICER/CUTTER, WITH 1.5 HP RELIANCE MOTOR, APPROX. 8 CIRCULAR BLADE, MATERIAL CHUCKS, (BALONEY SLICER). CABINET MOUNTED STYLE (464)
|
🔒 Subscribe | ||
|
|
TENNEY | T20RC-SPL |
TENNEY T20RC-SPL ENVIRONMENTAL TEMPERATURE HUMIDITY TEST CHAMBER S/N: 22947-03
|
🔒 Subscribe | |
|
|
LOT OF (2) DIAPHRAGM PUMPS
|
🔒 Subscribe | |||
|
|
WABASH | 12-TON HYDRAULIC PRESS |
WABASH 12-TON HYDRAULIC PRESS WITH NO PLATENS, WORK TABLE, HYDRAULIC SYSTEM
|
🔒 Subscribe | |
|
|
GATTO | HS2-4/24 |
GATTO HS2-4/24 10" EXTRUSION SAW CUTTER, WITH 10 SAW BLADE, OPERATOR'S PANEL, 1,100 LBS.
|
🔒 Subscribe | |
|
|
ABBE |
ABBE DOUBLE BALL MIXER WITH (2) TUMBLER BOWLS, WITH ONE MISSING SIDE COVER & BOWL DAMAGED, CAN SIZES: 15" DIA X 13" W EACH, MOTOR: 3/4 HP, 1,720 RPM, 115/230/1/60, GEAR REDUCER: 21:1 RATIO 84 RPM OUTPUT, ON CASTERS, UNITIZED FRAME BASE, PREVIOUS USAGE: MATERIAL GRINDING & BLENDING
|
🔒 Subscribe | ||
|
|
HAAKE | RHEOCORD 90 |
HAAKE RHEOCORD 90 MIXER BODY S/N: 89033, WITH INSTRUMENT: S-90-DU, MD #80-42-351, CONTROL PANEL, 220 VOLT, NO HEAD OR CABLES
|
🔒 Subscribe | |
|
|
BUDZAR | 2WT-35150-CHV |
BUDZAR 2WT-35150-CHV BTU TEMPERATURE CONTROL H2O UNIT, WITH 35 KW, 2-ZONE, 150 GPM, LAST USE: LARGE CALENDER
|
🔒 Subscribe | |
|
|
SYSTRONIC | DUAL 70 |
SYSTRONIC DUAL 70 NON-NUCLEAR, NON-CONTACT LASER THICKNESS MEASUREMENT SYSTEM S/N: 0002 WITH DRAWING #96-812-001, JOB #128, DUAL HEAD SYSTEM WITH DUAL CONTROL STATION, MANUALS, 120 VOLT (583)
|
🔒 Subscribe | |
|
|
GATTO | 205-4 |
GATTO 205-4 4" X 15" PULLER, WITH 15" L X 4" W FLAT BLET PULLER, MANUAL TENSION HOLDER, 2 HP, 208 VOLT MOTOR WITH CONTROLS & GUARDS, ON CASTERS (S/N: 8510333)
|
🔒 Subscribe | |
|
|
100-TON TMP HYDRAULIC PRESS, WITH SLAB SIDE DESIGN, (4) 24 X 24 X 5 HOT OIL PLATENS, (1) ATTACHED VACUUM/HEAT SHIELD LATCHING DOOR, 32 LEFT TO RIGHT BETWEEN SLABS X 34 FRONT TO BACK OPENING, 26" TOTAL DAYLIGHT OPENING, 3-OPENING PRESS, 8 RAM X 4 STROKE, 36 WORK HEIGHT, 76 TALL (366)
|
🔒 Subscribe | |||
|
|
8' X 6'' X 12'' EXTRUSION TANK WATER BATH, WITH UNDER MOUNTED CIRCULATION TANK, 1/3 HP PUMP MOTOR, PORTABLE ON CASTERS (932)
|
🔒 Subscribe |
INSTRON 1101
INSTRON 1101 TENSIOMETER TENSILE TESTER S/N: 2530, WITH CHART RECORDER, INSTRON UP TO 50 LB. LOAD CE...
2000
2000 LOT OF (3) 24" X 24" X 3" ELECTRIC PLATENS WITH CARTRIDGE TYPE HEATERS, 220 VOLT S/N: 948...
SCOTT L4
SCOTT L4 TENSILE TESTER WITH CHART RECORDER, JAWS, MOTORIZED (530) S/N: C37002...
AMSCO
AMSCO STEAM STERILIZER/VULCANIZER, WITH CONTROLS, ELECTRICALLY HEATED STEAM GENERATOR, WATER PUMP, H...
60-TON HYDRAULIC PRESS BANK, WITH (6) 18 LR X 21 FB ELECTRIC PLATENS TOTAL, (2) 7 OPENINGS PER PRESS
EDI 54'' STRAND DIE 124 HOLE
EDI 54'' STRAND DIE 124 HOLE, WITH 124-HOLE DIE, HAS REPLACEABLE DIE PLATE, 4 BACK CENTER FEED, ELEC...
BARWELL COLLECT O COOL TANK SYSTEM (906)
BARWELL COLLECT O COOL TANK SYSTEM (906)...
PHI SP214-C-M2-D
PHI SP214-C-M2-D 20-TON HYDRAULIC PRESS, S/N 82-6-019, WITH (2) 8 X 8 ELECTRIC HEAT WATER COOLED PLA...
12'' AIR KNIFE, WITH 30-STRAND ROLLER GUIDES, 120/208 VOLT, 20 AMP, PORTABLE UNIT, APPROX. 300 LBS.
FARREL 13" TWO-ROLL SILICONE MILL
FARREL 13" TWO-ROLL SILICONE MILL, S/N 62A975, WITH (2) 6 X 13 CHROME ROLLS, INBOARD SEALS, FLIP ADJ...
QUADRUPLE CLEATED BELT PULLER SYSTEM 3.5" X 50"
QUADRUPLE CLEATED BELT PULLER SYSTEM 3.5" X 50" - QUADRUPLE CLEATED BELT PULLER SYSTEM 3.5 X 50, WIT...
32' X 13" X 10" STAINLESS STEEL INSULATED WATER BATH - 32 X 13 X 10, 4 LIDS, STAINLESS STEEL, 2 INSU
32' X 13" X 10" STAINLESS STEEL INSULATED WATER BATH - 32 X 13 X 10, 4 LIDS, STAINLESS STEEL, 2 INSU
32' X 13" X 10" STAINLESS STEEL INSULATED WATER BATH - 32 X 13 X 10, 4 LIDS, STAINLESS STEEL, 2 INSU
32' X 13" X 10" STAINLESS STEEL INSULATED WATER BATH - 32 X 13 X 10, 4 LIDS, STAINLESS STEEL, 2 INSU
20' STAINLESS STEEL EXTRUSION WATER BATH, ON CASTERS (753)
14' X 16" X 8" STAINLESS STEEL WATER BATH, ON CASTERS, 415 LBS.
LOT OF (3) 40' COOLING TANKS, WITH WHEELED STANDS
32' X 13" X 8" STAINLESS STEEL INSULATED WATER BATH - 32 X 13 X 8", 4 LIDS, STAINLESS STEEL, 2 INSUL
32' X 13" X 8" STAINLESS STEEL INSULATED WATER BATH - 32 X 13 X 8", 4 LIDS, STAINLESS STEEL, 2 INSUL
RELIANCE
RUBBER SLICER/CUTTER, WITH 1.5 HP RELIANCE MOTOR, APPROX. 8 CIRCULAR BLADE, MATERIAL CHUCKS, (BALONE...
TENNEY T20RC-SPL
TENNEY T20RC-SPL ENVIRONMENTAL TEMPERATURE HUMIDITY TEST CHAMBER S/N: 22947-03...
LOT OF (2) DIAPHRAGM PUMPS
WABASH 12-TON HYDRAULIC PRESS
WABASH 12-TON HYDRAULIC PRESS WITH NO PLATENS, WORK TABLE, HYDRAULIC SYSTEM...
GATTO HS2-4/24
GATTO HS2-4/24 10" EXTRUSION SAW CUTTER, WITH 10 SAW BLADE, OPERATOR'S PANEL, 1,100 LBS....
ABBE
ABBE DOUBLE BALL MIXER WITH (2) TUMBLER BOWLS, WITH ONE MISSING SIDE COVER & BOWL DAMAGED, CAN SIZES...
HAAKE RHEOCORD 90
HAAKE RHEOCORD 90 MIXER BODY S/N: 89033, WITH INSTRUMENT: S-90-DU, MD #80-42-351, CONTROL PANEL, 220...
BUDZAR 2WT-35150-CHV
BUDZAR 2WT-35150-CHV BTU TEMPERATURE CONTROL H2O UNIT, WITH 35 KW, 2-ZONE, 150 GPM, LAST USE: LARGE ...
SYSTRONIC DUAL 70
SYSTRONIC DUAL 70 NON-NUCLEAR, NON-CONTACT LASER THICKNESS MEASUREMENT SYSTEM S/N: 0002 WITH DRAWING...
GATTO 205-4
GATTO 205-4 4" X 15" PULLER, WITH 15" L X 4" W FLAT BLET PULLER, MANUAL TENSION HOLDER, 2 HP, 208 VO...
100-TON TMP HYDRAULIC PRESS, WITH SLAB SIDE DESIGN, (4) 24 X 24 X 5 HOT OIL PLATENS, (1) ATTACHED VA
8' X 6'' X 12'' EXTRUSION TANK WATER BATH, WITH UNDER MOUNTED CIRCULATION TANK, 1/3 HP PUMP MOTOR, P