Leading Rubber Plastics Machinery Dealer Closing its Warehouse PEBSCO LLC

Integra Asset Solutions

Category: MISC

Total Lots: 232

Total Sales: 🔒 Subscribe

Lot Price Distribution

🔒

Subscribe to view

Unlock price distribution and full auction analytics

Sort:

Showing 151–200 of 232 lots

Year	Make	Model	Lot Description	Hammer Price
	FARRIS	PB4	FARRIS PB4 3.75" X 26" EXTRUSION PULLER, WITH (2) 3.75 X 26 SMOOTH BELTS, 2 HP MOTOR, 230 VOLT FARRIS · PB4	🔒 Subscribe
	BERLIN	122C877	BERLIN 122C877 1.5" PLASTIC EXTRUDER WITH SCHEMATICS/MANUALS, 30:1 L/D ELECTRICALLY HEATED BARREL, HOPPER, AIR COOLED BARREL, (5) HEATING ZONES, 10 HP VS MOTOR, 240/3/60, CONTROL PANEL (448) BERLIN · 122C877	🔒 Subscribe
	RELIABLE		RELIABLE 110-TON HYDRAULIC PRESS & PUMP, WITH 28" X 28" T-SLOTTED PLATENS (HEATED-ELEC), 24 OPENING, DISTANCE BETWEEN POSTS: 16.5 FB X 29.5 LR, 10 DIAMETER RAM, PUSH-PULL CYLINDERS, 2,750 PSI HYDRAULICS, FREE STANDING CONTROL CABINET WITH DIGITAL TEMP. CONTROLS, 5 HP, 220/440 VOLT, WITH HYD PUMP, PRESS 4 X 4 X 116 H, APPROX. 7,000 LBS., CONTROL/HYD UNIT: 64 X 36 X 102 H, APPROX. 1,000 LBS. RELIABLE	🔒 Subscribe
1998	MRS. INT'L INC	140	1998 MRS. INT'L INC 140 HYDRAULIC PRESS MOTOR STATOR BLOCKER FORMER S/N: 881, WITH 5 HP BALDOR HYDRAULICS, 220 VOLT, MOUNTED CONTROL PANEL, LAST USE: MOTOR STATORS (755) 1998 · MRS. INT'L INC · 140	🔒 Subscribe
	STEWART BOLLING	10" X 24"	STEWART BOLLING 10" X 24" TWO-ROLL INCLINED RUBBER CALENDER, WITH (2) CORED 10" X 24" ROLLS, INBOARD SEALS, ADJUSTABLE MOUNTED STOCK GUIDES, MOUNTED ADJUSTABLE CUTTING KNIFE ASSEMBLY, EVEN SPEED HERRINGBONE GEARING, CAPTAINS WHEEL NIP ADJUSTMENT, MOUNTED LUBRICATOR, FULK 1.5 SF, 30 HP ROLLER BEARING HIGH SPEED GEAR REDUCER RIGHT ANGLE STYLE, ALL MOUNTED ON STEEL FRAME BASE, NO MOTOR OR CONTROL, 100" X 70" (935) STEWART BOLLING · 10" X 24"	🔒 Subscribe
	CDS	SUPER SHOT BOY 16	CDS SUPER SHOT BOY 16 CRYOGENIC DEFLASHER, WITH 16" X 16" CAPACITY, LIQUID NITROGEN, PROGRAMMABLE COMPUTER, 10" COLOR MONITOR, ELECTRIC POWER DRIVE, TUMBLE ACTION, HIGH VELOCITY IMPACT, MEDIA/FLASH SEPARATION, BAR CODE READER SYSTEM, REMOVABLE SIDE PANELS (S/N: 917) CDS · SUPER SHOT BOY 16	🔒 Subscribe
	CARVER	LAB HYDRAULIC PRESS	CARVER LAB HYDRAULIC PRESS WITH 12.5 X 12.5 BED AREA, HYDRAULIC SYSTEM (955) S/N: 2833-34 CARVER · LAB HYDRAULIC PRESS	🔒 Subscribe
1999	DAVIS STANDARD	AIR WIPE	1999 DAVIS STANDARD AIR WIPE WITH 36" LONG STAINLESS STEEL TROUGH X 1.5" W, STYLE: VACUUM, ATTACHED CONTROL PANEL, 3.5 HP BALDOR MOTOR 230/460/3 (437) S/N: 01030 1999 · DAVIS STANDARD · AIR WIPE	🔒 Subscribe
	AEC	HYDRECLAIM 812	AEC HYDRECLAIM 812 20 HP FILM GRANULATOR, S/N 14362B, WITH 3/16" SCREEN DISCHARGE, 7 DIAMETER FEED OPENING WITH HOPPER, DISCHARGE 2 HP BLOWER, 20 HP 230/460/3/60 ELECTRICS, ATTACHED CONTROL PANEL, ALL MOUNTED ON STEEL FABRICATED TUBE BASE AEC · HYDRECLAIM 812	🔒 Subscribe
	UNADYN		UNADYN BLENDER MIXER, WITH STAINLESS STEEL HOPPER, 24" X 36" X 36 CHAMBER SIDE DISCHARGE, ELECTRICS 460/230/3/60, 1,100 LBS., 5 HP SEW-EURODRIVE MOTOR, DRY BLENDING PLASTIC PELLETS, ALL MOUNTED ON STEEL FRAME BASE UNADYN	🔒 Subscribe
	THROPP	LAB MILL	THROPP LAB MILL, 3 X 8'', S/N: T2576, WITH (2) 3 X 8 CORED CHROMED ROLLS, MATERIAL PLOWS F & B, 440 VOLT, CABINET (670) THROPP · LAB MILL	🔒 Subscribe
	PHI	100-TON HYDRAULIC PRESS	PHI 100-TON HYDRAULIC PRESS (958) PHI · 100-TON HYDRAULIC PRESS	🔒 Subscribe
	MONSANTO	T10	MONSANTO T10 TENSIOMETER S/N: ST10946 (532) MONSANTO · T10	🔒 Subscribe
2000			2000 AAA WELDING 100 PSI 12" X 36" AUTOCLAVE WITH CONFORMITY TO ASME CODE, SECTION V111, DIVISION 1, U CERTIFICATE OF AUTHORIZATION, NATIONAL BOARD CODED, HORIZONTAL VESSEL RATED TO 100 PSI AND 350 F, HYDRO TESTED AT 130 PSI, HYDRAULICALLY ACTUATED QUICK OPEN CLAM SHELL TYPE CLAMP ON DOOR, HYDRAULIC SAFETY LOCK, HYDRAULIC CYLINDER MOUNTED TO DOOR FOR OPENING/CLOSING, DOOR SWINGS DOWN AND IS LIGHT ENOUGH TO BE HANDLED MANUALLY, 36 LENGTH IS THE STRAIGHT WALL LENGTH, THE CONCAVE RADII OF THE DOOR AND REAR OF VESSEL ADD APPROX 8 TO THE INSIDE LENGTH, OUTSIDE OVERALL LENGTH APPROX. 50, STEAM VALVES AND SOME HYDRAULIC VALVING INCLUDED, STEAM VESSEL (752) 2000	🔒 Subscribe
	PMC	1-6V	PMC 1-6V 12' VACUUM EXTRUSION STAINLESS STEEL WATER TANK, SIZE: 12" X 144" X 12", 440 VOLT, CONTROLS, VACUUM RANGE: 1 - 6 (729), S/N: 200118A PMC · 1-6V	🔒 Subscribe
			3.5" HYDRAULICALLY OPERATED SCREEN CHANGER, 1,800 LBS. (697)	🔒 Subscribe
	DYNISCO	MJEP-300	DYNISCO MJEP-300 EXTRUDER POLYMER GEAR HOT MELT PUMP, WITH NOMINAL CAPACITY 282.6 CC/REV (16.9 KG/HR/RPM WITH S.G.=1.0), MAXIMUM OPERATING PRESSURE 5,000 PSI, MAXIMUM OPERATING TEMPERATURE 343C, SPECIAL WEAR RESISTANT BEARINGS SEALS 1117 CARBON STEEL, (4) PRESSURE TRANSDUCER PORTS (2 UPSTREAM, 2 DOWNSTREAM), 25 HP MOTOR, 230/460 VOLT, DRIVE & GEAR REDUCER, 45:1 REDUCTION, DUAL UNIVERSAL DRIVE SHAFT AND GUARD, DYNISCO GEAR PUMP CONTROL SYSTEM, UPSTREAM AND DOWNSTREAM PRESSURE INDICATORS, SPEED POTENTIOMETER, ADAPTOR PLATES (889) DYNISCO · MJEP-300	🔒 Subscribe
	DAKE	44-091	DAKE 44-091 75-TON LABORATORY HYDRAULIC PRESS, WITH (2) 19" X 19" ELECTRIC HEAT, WATER COOLED PLATENS S/N: 165384 DAKE · 44-091	🔒 Subscribe
	PHI	SBV-248-A	PHI SBV-248-A 50-TON HYDRAULIC PRESS, WITH (2) 18.5 X 12.5 ELECTRIC HEAT PLATENS, 208/1/60, 6.5" RAM, CURE TIMER, 3 DAYLIGHT WITH SHUTTLE ROLL OUT TABLE/3.5 WITHOUT, WORK HEIGHT WITH TABLE 39, 30 X 30 (746) S/N: 6343 PHI · SBV-248-A	🔒 Subscribe
	BOSTON	C 4'' X 22'	BOSTON C 4'' X 22' FLAT BELT PULLER, WITH (2) 4 X 22 FLAT BELTS, 1.5 HP DC MOTOR, 230 VOLT BOSTON · C 4'' X 22'	🔒 Subscribe
	FRENCH OIL		FRENCH OIL HYDRAULIC PRESS & PUMP WITH (2) 18 X 18 ELECTRIC HEAT PLATENS, 220 VOLT, (2) PUSH BACK CYLINDERS, FULLY GUIDED BOLSTER, 3,000 PSI OPERATING, STAND ALONE HYDRAULIC POWER UNIT (504) FRENCH OIL	🔒 Subscribe
	GATTO	207-3PC	GATTO 207-3PC 3.5" X 30" CLEATED PULLER, S/N: 8610609, WITH (2) 3.5 X 30 CLEATED BELTS, PORTABLE ON CASTERS, 3 HP DC MOTOR, 230 VOLT GATTO · 207-3PC	🔒 Subscribe
	PHI	20-TON HAND PUMP TABLE MODEL PRESS	PHI 20-TON HAND PUMP TABLE MODEL PRESS WITH (2) 9 X 12 ELECTRIC HEAT WATER COOLED PLATENS, 240 VOLT, 14 WORK HEIGHT, DAYLIGHT APPROX. 10, 17 LR X 15 FB X 40 T (963) PHI · 20-TON HAND PUMP TABLE MODEL PRESS	🔒 Subscribe
	PHI	20-TON HAND PUMP TABLE MODEL PRESS	PHI 20-TON HAND PUMP TABLE MODEL PRESS WITH (2) 12.5 X 9 ELECTRIC HEAT WATER COOLED PLATENS, 240 VOLT, ADJUSTABLE OPENING TO 6, WORK HEIGHT 18, 18 LR X 14 FB X 34 T (964) PHI · 20-TON HAND PUMP TABLE MODEL PRESS	🔒 Subscribe
	PHI	B24-1-M4	PHI B24-1-M4 50-TON HYDRAULIC PRESS, WITH 19" X 18" BED AREA, 1 HP MOTOR, 480/3 (739) S/N: 5964 PHI · B24-1-M4	🔒 Subscribe
	PHI	70-TON PRESS & PUMP (945)	PHI 70-TON PRESS & PUMP (945) PHI · 70-TON PRESS & PUMP (945)	🔒 Subscribe
			(1) 36'' X 36'' ELECTRIC HEAT PLATEN, (2) 36'' X 44'' STEAM PLATENS (965)	🔒 Subscribe
	CARVER		CARVER LAB HYDRAULIC PRESS, WITH 12'' X 12'' ELECTRIC HEAT WATER COOLED PLATENS, ENERPAC HYDRAULIC CYLINDER & JACK, NO ATTACHED METAL TABLE CARVER	🔒 Subscribe
	GATTO	DPC101C5-1	GATTO DPC101C5-1 5' WATER VACUUM CALIBRATION EXTRUSION TANK, WITH 8" X 8" X 60" STAINLESS STEEL TANK, 1 HP & 2 HP MOTORS, 220 VOLT, LIDS, PORTABLE (808) GATTO · DPC101C5-1	🔒 Subscribe
	WABASH	50-15-2M	WABASH 50-15-2M 50-TON HYDRAULIC PRESS, WITH (2) 15 X 15 ELECTRIC HEAT PLATENS, LEFT TO RIGHT BETWEEN POSTS 16.5 X 7.5 BETWEEN POSTS FB, WORKING DAYLIGHT 7.25 UP TO 15 ADJUSTABLE, 220/440/60, ATTACHED CONTROL PANEL, 45 WORK HEIGHT S/N: 1663 WABASH · 50-15-2M	🔒 Subscribe
	PHI	20-TON HYDRAULIC LAB PRESS	PHI 20-TON HYDRAULIC LAB PRESS WITH (2) 8.5" X 8.5" ELECTRIC HEAT WATER COOLED PLATENS, DAMAGED HOOD (959) PHI · 20-TON HYDRAULIC LAB PRESS	🔒 Subscribe
	DAKE	44058	DAKE 44058 70-TON HYDRAULIC PRESS, S/N: 172321, WITH NO PLATENS, NO BOLSTER, LEFT TO RIGHT BETWEEN POSTS 20 X 19 FRONT TO BACK, ACCOMMODATES 18 X 18 PLATENS, 12 TOTAL DAYLIGHT OPENING UTILIZING A 4 REPLACEMENT BOLSTER, 6 RAM, ATTACHED DISCONNECT, SELF-CONTAINED HYDRAULIC SYSTEM WITH PUMP & MOTOR, 36 LR X 25 FB X 71 T (952) DAKE · 44058	🔒 Subscribe
	BOLLING	200-TON HYDRAULIC PRESS	BOLLING 200-TON HYDRAULIC PRESS & PUMP WITH (2) 24 X 24 ELECTRIC HEAT PLATENS 440 VOLT, 4 STRAIN RODS, DAYLIGHT 19, LEFT TO RIGHT 26.5 BETWEEN RODS, 10.5 STEEL PLATE HEAD, 5 GUIDED STEEL BOLSTER, 16 RAM, CONTROL PANEL WITH TEMPERATURE CONTROLLERS, 20 HP HYDRAULIC PUMP SYSTEM, 220V/440V, PRESS DIM. 40 LR X 28 X 7, 7,000LBS., PUMP DIM. 40 X 48 X 69 X 1,500 LBS. BOLLING · 200-TON HYDRAULIC PRESS	🔒 Subscribe
	CARVER	9947.4D10A AUTOSERIES 25-TON HYDRAULIC SYSTEM	CARVER 9947.4D10A AUTOSERIES 25-TON HYDRAULIC SYSTEM S/N: 9947-094, WITH 230 VOLT (869) CARVER · 9947.4D10A AUTOSERIES 25-TON HYDRAULIC SYSTEM	🔒 Subscribe
	BRABENDER	SE UNIVEX	BRABENDER SE UNIVEX TAKE-OFF LAB ROLL SHEET STACK TAKE OFF, WITH (3) 8 CANS, 2 WITH ROTARY UNIONS, ADJUSTABLE SPEED/TORQUE CONTROL, 115/1/60, PORTABLE UNIT (837) BRABENDER · SE UNIVEX	🔒 Subscribe
	ELMES	50-TON HYDROLAIR PRESS	ELMES 50-TON HYDROLAIR PRESS WITH (2) 18 X 18 ELECTRIC HEAT WATER-COOLED PLATENS, 18.5 LEFT TO RIGHT BETWEEN POSTS, 6 DAYLIGHT, (4) 2 STRAIN RODS, 6 RAM, 48 WORK HEIGHT, 36 X 30 X 80 T (733) S/N: P3724 ELMES · 50-TON HYDROLAIR PRESS	🔒 Subscribe
2012			2012 POLYMER EXTRUSION WINDER WITH DUAL MOTORIZED SPINDLES, VARIABLE SPEED DIGITAL CONTROL PANEL (MOUNTED), STEEL FRAME, LAST USE: MEDICAL RUBBER & SILICONE TUBING 2012	🔒 Subscribe
	LITTLEFORD	W10	LITTLEFORD W10 POLYMER LAB MIXER WITH S/S, JACKETED BOWL, SIDE DISCHARGE WITH PLUG VALVE, CONTROL PANEL (611) S/N: 20177-3142 LITTLEFORD · W10	🔒 Subscribe
	YOUNGSTOWN MILLER	HT-90-1M	YOUNGSTOWN MILLER HT-90-1M 0 - 550 F 90 KW HOT OIL UNIT S/N: HT-1287, WITH 460/3/60, 121 AMP (838) YOUNGSTOWN MILLER · HT-90-1M	🔒 Subscribe
1993	BABCOCK	465 KW	1993 BABCOCK 465 KW HOT OIL BOILER, S/N: RF22-47725, WITH 500F/265C, GAS FIRED BOILER, CONTROL PANEL MOUNTED, UNITIZED BASE, 380/3, PREVIOUS USAGE: RUBBER MAT MFG. INDUSTRY 1993 · BABCOCK · 465 KW	🔒 Subscribe
	WABASH	50-15-2TRM	WABASH 50-15-2TRM 50-TON TRANSFER MOLDING PRESS S/N: 4391, WITH BOLSTER BED AREA: 15 X 15, NO PLATENS, ADJUSTABLE DAYLIGHT APPROX. 15 CURRENTLY, COMPRESSION STROKE 7", TRANSFER STROKE 15", WATTS 6,000, 480/60/3, 50-TONS FORCE, 15-TON TRANSFER-TONS, 7.5 HP 230/460V 1,150 RPM, ORIGINAL USAGE: MOLDING ELECTRICAL CONTACTORS, SPARE 7.5 HP MOTOR (303) WABASH · 50-15-2TRM	🔒 Subscribe
	SCHERR TUMICO	22-3001	SCHERR TUMICO 22-3001 14" OPTICAL COMPARATOR S/N: 6844402, WITH 120 VOLT SCHERR TUMICO · 22-3001	🔒 Subscribe
			ELECTRIC HEAT/WATER-COOLED PLATENS, 18.5" X 12.5" X 2.5", 240 VOLT	🔒 Subscribe
	IDE	8" X 40"	IDE 8" X 40" EXTRUSION CLEATED BELT PULLER, WITH (2) 40 X 8 CLEATED BELTS CONTACT, ATTACHED CONTROL PANEL, 60 X 24 X 68 (637) IDE · 8" X 40"	🔒 Subscribe
			119" X 13" X 6" STAINLESS STEEL WATER BATH, ON CASTERS, 250 LBS.	🔒 Subscribe
	RDN	VT08-02	RDN VT08-02 10' WATER VACUUM CALIBRATION EXTRUSION TANK, WITH STAINLESS STEEL TANK, 10 X 10 X 10 TANK, SHUTTLED TANK ON CASTERS, (3) INSPECTION LIDS, START STOP POD, 3 HP 220/440 VAC PUMP, PORTABLE MOUNTED UNIT ON CASTERS (750) RDN · VT08-02	🔒 Subscribe
			STAINLESS STEEL EXTRUSION WATER TANK, WITH 6 X 11 X 118, ON CASTERS (801)	🔒 Subscribe
	EXTRUSION SERVICES	18'' EMBOSSED ROLL PULLER	EXTRUSION SERVICES 18'' EMBOSSED ROLL PULLER WITH 18 WIDE PULL ROLLERS, TENSION HOLDERS, IN LINE ROLLER GUIDES, MOUNTED PROGRAMMABLE OPERATORS CONTROL PANEL, LEVELING PINS (283) S/N: 788109B EXTRUSION SERVICES · 18'' EMBOSSED ROLL PULLER	🔒 Subscribe
			SERVO PULLER CUTTER COMBO, WITH SERVO CUTTER, FLAT BELTS, CONTREX CONTROL (960)	🔒 Subscribe
	DAVIS STANDARD		DAVIS STANDARD HEAT SEALER, WITH PROXIMITY SENSOR, ATTACHED COMPLETE CONTROL PANEL, ALL ASSEMBLED WITH CASTERS (291) DAVIS STANDARD	🔒 Subscribe

Year	Make	Model	Description	Price
	FARRIS	PB4	FARRIS PB4 3.75" X 26" EXTRUSION PULLER, WITH (2) 3.75 X 26 SMOOTH BELTS, 2 HP MOTOR, 230 VOLT	🔒 Subscribe
	BERLIN	122C877	BERLIN 122C877 1.5" PLASTIC EXTRUDER WITH SCHEMATICS/MANUALS, 30:1 L/D ELECTRICALLY HEATED BARREL, HOPPER, AIR COOLED BARREL, (5) HEATING ZONES, 10 HP VS MOTOR, 240/3/60, CONTROL PANEL (448)	🔒 Subscribe
	RELIABLE		RELIABLE 110-TON HYDRAULIC PRESS & PUMP, WITH 28" X 28" T-SLOTTED PLATENS (HEATED-ELEC), 24 OPENING, DISTANCE BETWEEN POSTS: 16.5 FB X 29.5 LR, 10 DIAMETER RAM, PUSH-PULL CYLINDERS, 2,750 PSI HYDRAULICS, FREE STANDING CONTROL CABINET WITH DIGITAL TEMP. CONTROLS, 5 HP, 220/440 VOLT, WITH HYD PUMP, PRESS 4 X 4 X 116 H, APPROX. 7,000 LBS., CONTROL/HYD UNIT: 64 X 36 X 102 H, APPROX. 1,000 LBS.	🔒 Subscribe
1998	MRS. INT'L INC	140	1998 MRS. INT'L INC 140 HYDRAULIC PRESS MOTOR STATOR BLOCKER FORMER S/N: 881, WITH 5 HP BALDOR HYDRAULICS, 220 VOLT, MOUNTED CONTROL PANEL, LAST USE: MOTOR STATORS (755)	🔒 Subscribe
	STEWART BOLLING	10" X 24"	STEWART BOLLING 10" X 24" TWO-ROLL INCLINED RUBBER CALENDER, WITH (2) CORED 10" X 24" ROLLS, INBOARD SEALS, ADJUSTABLE MOUNTED STOCK GUIDES, MOUNTED ADJUSTABLE CUTTING KNIFE ASSEMBLY, EVEN SPEED HERRINGBONE GEARING, CAPTAINS WHEEL NIP ADJUSTMENT, MOUNTED LUBRICATOR, FULK 1.5 SF, 30 HP ROLLER BEARING HIGH SPEED GEAR REDUCER RIGHT ANGLE STYLE, ALL MOUNTED ON STEEL FRAME BASE, NO MOTOR OR CONTROL, 100" X 70" (935)	🔒 Subscribe
	CDS	SUPER SHOT BOY 16	CDS SUPER SHOT BOY 16 CRYOGENIC DEFLASHER, WITH 16" X 16" CAPACITY, LIQUID NITROGEN, PROGRAMMABLE COMPUTER, 10" COLOR MONITOR, ELECTRIC POWER DRIVE, TUMBLE ACTION, HIGH VELOCITY IMPACT, MEDIA/FLASH SEPARATION, BAR CODE READER SYSTEM, REMOVABLE SIDE PANELS (S/N: 917)	🔒 Subscribe
	CARVER	LAB HYDRAULIC PRESS	CARVER LAB HYDRAULIC PRESS WITH 12.5 X 12.5 BED AREA, HYDRAULIC SYSTEM (955) S/N: 2833-34	🔒 Subscribe
1999	DAVIS STANDARD	AIR WIPE	1999 DAVIS STANDARD AIR WIPE WITH 36" LONG STAINLESS STEEL TROUGH X 1.5" W, STYLE: VACUUM, ATTACHED CONTROL PANEL, 3.5 HP BALDOR MOTOR 230/460/3 (437) S/N: 01030	🔒 Subscribe
	AEC	HYDRECLAIM 812	AEC HYDRECLAIM 812 20 HP FILM GRANULATOR, S/N 14362B, WITH 3/16" SCREEN DISCHARGE, 7 DIAMETER FEED OPENING WITH HOPPER, DISCHARGE 2 HP BLOWER, 20 HP 230/460/3/60 ELECTRICS, ATTACHED CONTROL PANEL, ALL MOUNTED ON STEEL FABRICATED TUBE BASE	🔒 Subscribe
	UNADYN		UNADYN BLENDER MIXER, WITH STAINLESS STEEL HOPPER, 24" X 36" X 36 CHAMBER SIDE DISCHARGE, ELECTRICS 460/230/3/60, 1,100 LBS., 5 HP SEW-EURODRIVE MOTOR, DRY BLENDING PLASTIC PELLETS, ALL MOUNTED ON STEEL FRAME BASE	🔒 Subscribe
	THROPP	LAB MILL	THROPP LAB MILL, 3 X 8'', S/N: T2576, WITH (2) 3 X 8 CORED CHROMED ROLLS, MATERIAL PLOWS F & B, 440 VOLT, CABINET (670)	🔒 Subscribe
	PHI	100-TON HYDRAULIC PRESS	PHI 100-TON HYDRAULIC PRESS (958)	🔒 Subscribe
	MONSANTO	T10	MONSANTO T10 TENSIOMETER S/N: ST10946 (532)	🔒 Subscribe
2000			2000 AAA WELDING 100 PSI 12" X 36" AUTOCLAVE WITH CONFORMITY TO ASME CODE, SECTION V111, DIVISION 1, U CERTIFICATE OF AUTHORIZATION, NATIONAL BOARD CODED, HORIZONTAL VESSEL RATED TO 100 PSI AND 350 F, HYDRO TESTED AT 130 PSI, HYDRAULICALLY ACTUATED QUICK OPEN CLAM SHELL TYPE CLAMP ON DOOR, HYDRAULIC SAFETY LOCK, HYDRAULIC CYLINDER MOUNTED TO DOOR FOR OPENING/CLOSING, DOOR SWINGS DOWN AND IS LIGHT ENOUGH TO BE HANDLED MANUALLY, 36 LENGTH IS THE STRAIGHT WALL LENGTH, THE CONCAVE RADII OF THE DOOR AND REAR OF VESSEL ADD APPROX 8 TO THE INSIDE LENGTH, OUTSIDE OVERALL LENGTH APPROX. 50, STEAM VALVES AND SOME HYDRAULIC VALVING INCLUDED, STEAM VESSEL (752)	🔒 Subscribe
	PMC	1-6V	PMC 1-6V 12' VACUUM EXTRUSION STAINLESS STEEL WATER TANK, SIZE: 12" X 144" X 12", 440 VOLT, CONTROLS, VACUUM RANGE: 1 - 6 (729), S/N: 200118A	🔒 Subscribe
			3.5" HYDRAULICALLY OPERATED SCREEN CHANGER, 1,800 LBS. (697)	🔒 Subscribe
	DYNISCO	MJEP-300	DYNISCO MJEP-300 EXTRUDER POLYMER GEAR HOT MELT PUMP, WITH NOMINAL CAPACITY 282.6 CC/REV (16.9 KG/HR/RPM WITH S.G.=1.0), MAXIMUM OPERATING PRESSURE 5,000 PSI, MAXIMUM OPERATING TEMPERATURE 343C, SPECIAL WEAR RESISTANT BEARINGS SEALS 1117 CARBON STEEL, (4) PRESSURE TRANSDUCER PORTS (2 UPSTREAM, 2 DOWNSTREAM), 25 HP MOTOR, 230/460 VOLT, DRIVE & GEAR REDUCER, 45:1 REDUCTION, DUAL UNIVERSAL DRIVE SHAFT AND GUARD, DYNISCO GEAR PUMP CONTROL SYSTEM, UPSTREAM AND DOWNSTREAM PRESSURE INDICATORS, SPEED POTENTIOMETER, ADAPTOR PLATES (889)	🔒 Subscribe
	DAKE	44-091	DAKE 44-091 75-TON LABORATORY HYDRAULIC PRESS, WITH (2) 19" X 19" ELECTRIC HEAT, WATER COOLED PLATENS S/N: 165384	🔒 Subscribe
	PHI	SBV-248-A	PHI SBV-248-A 50-TON HYDRAULIC PRESS, WITH (2) 18.5 X 12.5 ELECTRIC HEAT PLATENS, 208/1/60, 6.5" RAM, CURE TIMER, 3 DAYLIGHT WITH SHUTTLE ROLL OUT TABLE/3.5 WITHOUT, WORK HEIGHT WITH TABLE 39, 30 X 30 (746) S/N: 6343	🔒 Subscribe
	BOSTON	C 4'' X 22'	BOSTON C 4'' X 22' FLAT BELT PULLER, WITH (2) 4 X 22 FLAT BELTS, 1.5 HP DC MOTOR, 230 VOLT	🔒 Subscribe
	FRENCH OIL		FRENCH OIL HYDRAULIC PRESS & PUMP WITH (2) 18 X 18 ELECTRIC HEAT PLATENS, 220 VOLT, (2) PUSH BACK CYLINDERS, FULLY GUIDED BOLSTER, 3,000 PSI OPERATING, STAND ALONE HYDRAULIC POWER UNIT (504)	🔒 Subscribe
	GATTO	207-3PC	GATTO 207-3PC 3.5" X 30" CLEATED PULLER, S/N: 8610609, WITH (2) 3.5 X 30 CLEATED BELTS, PORTABLE ON CASTERS, 3 HP DC MOTOR, 230 VOLT	🔒 Subscribe
	PHI	20-TON HAND PUMP TABLE MODEL PRESS	PHI 20-TON HAND PUMP TABLE MODEL PRESS WITH (2) 9 X 12 ELECTRIC HEAT WATER COOLED PLATENS, 240 VOLT, 14 WORK HEIGHT, DAYLIGHT APPROX. 10, 17 LR X 15 FB X 40 T (963)	🔒 Subscribe
	PHI	20-TON HAND PUMP TABLE MODEL PRESS	PHI 20-TON HAND PUMP TABLE MODEL PRESS WITH (2) 12.5 X 9 ELECTRIC HEAT WATER COOLED PLATENS, 240 VOLT, ADJUSTABLE OPENING TO 6, WORK HEIGHT 18, 18 LR X 14 FB X 34 T (964)	🔒 Subscribe
	PHI	B24-1-M4	PHI B24-1-M4 50-TON HYDRAULIC PRESS, WITH 19" X 18" BED AREA, 1 HP MOTOR, 480/3 (739) S/N: 5964	🔒 Subscribe
	PHI	70-TON PRESS & PUMP (945)	PHI 70-TON PRESS & PUMP (945)	🔒 Subscribe
			(1) 36'' X 36'' ELECTRIC HEAT PLATEN, (2) 36'' X 44'' STEAM PLATENS (965)	🔒 Subscribe
	CARVER		CARVER LAB HYDRAULIC PRESS, WITH 12'' X 12'' ELECTRIC HEAT WATER COOLED PLATENS, ENERPAC HYDRAULIC CYLINDER & JACK, NO ATTACHED METAL TABLE	🔒 Subscribe
	GATTO	DPC101C5-1	GATTO DPC101C5-1 5' WATER VACUUM CALIBRATION EXTRUSION TANK, WITH 8" X 8" X 60" STAINLESS STEEL TANK, 1 HP & 2 HP MOTORS, 220 VOLT, LIDS, PORTABLE (808)	🔒 Subscribe
	WABASH	50-15-2M	WABASH 50-15-2M 50-TON HYDRAULIC PRESS, WITH (2) 15 X 15 ELECTRIC HEAT PLATENS, LEFT TO RIGHT BETWEEN POSTS 16.5 X 7.5 BETWEEN POSTS FB, WORKING DAYLIGHT 7.25 UP TO 15 ADJUSTABLE, 220/440/60, ATTACHED CONTROL PANEL, 45 WORK HEIGHT S/N: 1663	🔒 Subscribe
	PHI	20-TON HYDRAULIC LAB PRESS	PHI 20-TON HYDRAULIC LAB PRESS WITH (2) 8.5" X 8.5" ELECTRIC HEAT WATER COOLED PLATENS, DAMAGED HOOD (959)	🔒 Subscribe
	DAKE	44058	DAKE 44058 70-TON HYDRAULIC PRESS, S/N: 172321, WITH NO PLATENS, NO BOLSTER, LEFT TO RIGHT BETWEEN POSTS 20 X 19 FRONT TO BACK, ACCOMMODATES 18 X 18 PLATENS, 12 TOTAL DAYLIGHT OPENING UTILIZING A 4 REPLACEMENT BOLSTER, 6 RAM, ATTACHED DISCONNECT, SELF-CONTAINED HYDRAULIC SYSTEM WITH PUMP & MOTOR, 36 LR X 25 FB X 71 T (952)	🔒 Subscribe
	BOLLING	200-TON HYDRAULIC PRESS	BOLLING 200-TON HYDRAULIC PRESS & PUMP WITH (2) 24 X 24 ELECTRIC HEAT PLATENS 440 VOLT, 4 STRAIN RODS, DAYLIGHT 19, LEFT TO RIGHT 26.5 BETWEEN RODS, 10.5 STEEL PLATE HEAD, 5 GUIDED STEEL BOLSTER, 16 RAM, CONTROL PANEL WITH TEMPERATURE CONTROLLERS, 20 HP HYDRAULIC PUMP SYSTEM, 220V/440V, PRESS DIM. 40 LR X 28 X 7, 7,000LBS., PUMP DIM. 40 X 48 X 69 X 1,500 LBS.	🔒 Subscribe
	CARVER	9947.4D10A AUTOSERIES 25-TON HYDRAULIC SYSTEM	CARVER 9947.4D10A AUTOSERIES 25-TON HYDRAULIC SYSTEM S/N: 9947-094, WITH 230 VOLT (869)	🔒 Subscribe
	BRABENDER	SE UNIVEX	BRABENDER SE UNIVEX TAKE-OFF LAB ROLL SHEET STACK TAKE OFF, WITH (3) 8 CANS, 2 WITH ROTARY UNIONS, ADJUSTABLE SPEED/TORQUE CONTROL, 115/1/60, PORTABLE UNIT (837)	🔒 Subscribe
	ELMES	50-TON HYDROLAIR PRESS	ELMES 50-TON HYDROLAIR PRESS WITH (2) 18 X 18 ELECTRIC HEAT WATER-COOLED PLATENS, 18.5 LEFT TO RIGHT BETWEEN POSTS, 6 DAYLIGHT, (4) 2 STRAIN RODS, 6 RAM, 48 WORK HEIGHT, 36 X 30 X 80 T (733) S/N: P3724	🔒 Subscribe
2012			2012 POLYMER EXTRUSION WINDER WITH DUAL MOTORIZED SPINDLES, VARIABLE SPEED DIGITAL CONTROL PANEL (MOUNTED), STEEL FRAME, LAST USE: MEDICAL RUBBER & SILICONE TUBING	🔒 Subscribe
	LITTLEFORD	W10	LITTLEFORD W10 POLYMER LAB MIXER WITH S/S, JACKETED BOWL, SIDE DISCHARGE WITH PLUG VALVE, CONTROL PANEL (611) S/N: 20177-3142	🔒 Subscribe
	YOUNGSTOWN MILLER	HT-90-1M	YOUNGSTOWN MILLER HT-90-1M 0 - 550 F 90 KW HOT OIL UNIT S/N: HT-1287, WITH 460/3/60, 121 AMP (838)	🔒 Subscribe
1993	BABCOCK	465 KW	1993 BABCOCK 465 KW HOT OIL BOILER, S/N: RF22-47725, WITH 500F/265C, GAS FIRED BOILER, CONTROL PANEL MOUNTED, UNITIZED BASE, 380/3, PREVIOUS USAGE: RUBBER MAT MFG. INDUSTRY	🔒 Subscribe
	WABASH	50-15-2TRM	WABASH 50-15-2TRM 50-TON TRANSFER MOLDING PRESS S/N: 4391, WITH BOLSTER BED AREA: 15 X 15, NO PLATENS, ADJUSTABLE DAYLIGHT APPROX. 15 CURRENTLY, COMPRESSION STROKE 7", TRANSFER STROKE 15", WATTS 6,000, 480/60/3, 50-TONS FORCE, 15-TON TRANSFER-TONS, 7.5 HP 230/460V 1,150 RPM, ORIGINAL USAGE: MOLDING ELECTRICAL CONTACTORS, SPARE 7.5 HP MOTOR (303)	🔒 Subscribe
	SCHERR TUMICO	22-3001	SCHERR TUMICO 22-3001 14" OPTICAL COMPARATOR S/N: 6844402, WITH 120 VOLT	🔒 Subscribe
			ELECTRIC HEAT/WATER-COOLED PLATENS, 18.5" X 12.5" X 2.5", 240 VOLT	🔒 Subscribe
	IDE	8" X 40"	IDE 8" X 40" EXTRUSION CLEATED BELT PULLER, WITH (2) 40 X 8 CLEATED BELTS CONTACT, ATTACHED CONTROL PANEL, 60 X 24 X 68 (637)	🔒 Subscribe
			119" X 13" X 6" STAINLESS STEEL WATER BATH, ON CASTERS, 250 LBS.	🔒 Subscribe
	RDN	VT08-02	RDN VT08-02 10' WATER VACUUM CALIBRATION EXTRUSION TANK, WITH STAINLESS STEEL TANK, 10 X 10 X 10 TANK, SHUTTLED TANK ON CASTERS, (3) INSPECTION LIDS, START STOP POD, 3 HP 220/440 VAC PUMP, PORTABLE MOUNTED UNIT ON CASTERS (750)	🔒 Subscribe
			STAINLESS STEEL EXTRUSION WATER TANK, WITH 6 X 11 X 118, ON CASTERS (801)	🔒 Subscribe
	EXTRUSION SERVICES	18'' EMBOSSED ROLL PULLER	EXTRUSION SERVICES 18'' EMBOSSED ROLL PULLER WITH 18 WIDE PULL ROLLERS, TENSION HOLDERS, IN LINE ROLLER GUIDES, MOUNTED PROGRAMMABLE OPERATORS CONTROL PANEL, LEVELING PINS (283) S/N: 788109B	🔒 Subscribe
			SERVO PULLER CUTTER COMBO, WITH SERVO CUTTER, FLAT BELTS, CONTREX CONTROL (960)	🔒 Subscribe
	DAVIS STANDARD		DAVIS STANDARD HEAT SEALER, WITH PROXIMITY SENSOR, ATTACHED COMPLETE CONTROL PANEL, ALL ASSEMBLED WITH CASTERS (291)	🔒 Subscribe

FARRIS PB4

MISC

FARRIS PB4 3.75" X 26" EXTRUSION PULLER, WITH (2) 3.75 X 26 SMOOTH BELTS, 2 HP MOTOR, 230 VOLT...

Hammer Price: 🔒

BERLIN 122C877

PLASTICS PROCESSING EQUIPMENT

BERLIN 122C877 1.5" PLASTIC EXTRUDER WITH SCHEMATICS/MANUALS, 30:1 L/D ELECTRICALLY HEATED BARREL, H...

Hammer Price: 🔒

RELIABLE

PRESSES & FORMING

RELIABLE 110-TON HYDRAULIC PRESS & PUMP, WITH 28" X 28" T-SLOTTED PLATENS (HEATED-ELEC), 24 OPENING,...

Hammer Price: 🔒

1998 MRS. INT'L INC 140

PRESSES & FORMING

1998 MRS. INT'L INC 140 HYDRAULIC PRESS MOTOR STATOR BLOCKER FORMER S/N: 881, WITH 5 HP BALDOR HYDRA...

Hammer Price: 🔒

STEWART BOLLING 10" X 24"

MISC

STEWART BOLLING 10" X 24" TWO-ROLL INCLINED RUBBER CALENDER, WITH (2) CORED 10" X 24" ROLLS, INBOARD...

Hammer Price: 🔒

CDS SUPER SHOT BOY 16

MISC

CDS SUPER SHOT BOY 16 CRYOGENIC DEFLASHER, WITH 16" X 16" CAPACITY, LIQUID NITROGEN, PROGRAMMABLE CO...

Hammer Price: 🔒

CARVER LAB HYDRAULIC PRESS

PRESSES & FORMING

CARVER LAB HYDRAULIC PRESS WITH 12.5 X 12.5 BED AREA, HYDRAULIC SYSTEM (955) S/N: 2833-34...

Hammer Price: 🔒

1999 DAVIS STANDARD AIR WIPE

MISC

1999 DAVIS STANDARD AIR WIPE WITH 36" LONG STAINLESS STEEL TROUGH X 1.5" W, STYLE: VACUUM, ATTACHED ...

Hammer Price: 🔒

AEC HYDRECLAIM 812

PACKAGING EQUIPMENT

AEC HYDRECLAIM 812 20 HP FILM GRANULATOR, S/N 14362B, WITH 3/16" SCREEN DISCHARGE, 7 DIAMETER FEED O...

Hammer Price: 🔒

UNADYN

MISC

UNADYN BLENDER MIXER, WITH STAINLESS STEEL HOPPER, 24" X 36" X 36 CHAMBER SIDE DISCHARGE, ELECTRICS ...

Hammer Price: 🔒

THROPP LAB MILL

MISC

THROPP LAB MILL, 3 X 8'', S/N: T2576, WITH (2) 3 X 8 CORED CHROMED ROLLS, MATERIAL PLOWS F & B, 440 ...

Hammer Price: 🔒

PHI 100-TON HYDRAULIC PRESS

PRESSES & FORMING

PHI 100-TON HYDRAULIC PRESS (958)...

Hammer Price: 🔒

MONSANTO T10

MISC

MONSANTO T10 TENSIOMETER S/N: ST10946 (532)...

Hammer Price: 🔒

2000

MISC

2000 AAA WELDING 100 PSI 12" X 36" AUTOCLAVE WITH CONFORMITY TO ASME CODE, SECTION V111, DIVISION 1,...

Hammer Price: 🔒

PMC 1-6V

PLASTICS PROCESSING EQUIPMENT

PMC 1-6V 12' VACUUM EXTRUSION STAINLESS STEEL WATER TANK, SIZE: 12" X 144" X 12", 440 VOLT, CONTROLS...

Hammer Price: 🔒

MISC

3.5" HYDRAULICALLY OPERATED SCREEN CHANGER, 1,800 LBS. (697)...

Hammer Price: 🔒

DYNISCO MJEP-300

PLASTICS PROCESSING EQUIPMENT

DYNISCO MJEP-300 EXTRUDER POLYMER GEAR HOT MELT PUMP, WITH NOMINAL CAPACITY 282.6 CC/REV (16.9 KG/HR...

Hammer Price: 🔒

DAKE 44-091

PRESSES & FORMING

DAKE 44-091 75-TON LABORATORY HYDRAULIC PRESS, WITH (2) 19" X 19" ELECTRIC HEAT, WATER COOLED PLATEN...

Hammer Price: 🔒

PHI SBV-248-A

PRESSES & FORMING

PHI SBV-248-A 50-TON HYDRAULIC PRESS, WITH (2) 18.5 X 12.5 ELECTRIC HEAT PLATENS, 208/1/60, 6.5" RAM...

Hammer Price: 🔒

BOSTON C 4'' X 22'

MISC

BOSTON C 4'' X 22' FLAT BELT PULLER, WITH (2) 4 X 22 FLAT BELTS, 1.5 HP DC MOTOR, 230 VOLT...

Hammer Price: 🔒

FRENCH OIL

PRESSES & FORMING

FRENCH OIL HYDRAULIC PRESS & PUMP WITH (2) 18 X 18 ELECTRIC HEAT PLATENS, 220 VOLT, (2) PUSH BACK CY...

Hammer Price: 🔒

GATTO 207-3PC

MISC

GATTO 207-3PC 3.5" X 30" CLEATED PULLER, S/N: 8610609, WITH (2) 3.5 X 30 CLEATED BELTS, PORTABLE ON ...

Hammer Price: 🔒

PHI 20-TON HAND PUMP TABLE MODEL PRESS

PRESSES & FORMING

PHI 20-TON HAND PUMP TABLE MODEL PRESS WITH (2) 9 X 12 ELECTRIC HEAT WATER COOLED PLATENS, 240 VOLT,...

Hammer Price: 🔒

PHI 20-TON HAND PUMP TABLE MODEL PRESS

PRESSES & FORMING

PHI 20-TON HAND PUMP TABLE MODEL PRESS WITH (2) 12.5 X 9 ELECTRIC HEAT WATER COOLED PLATENS, 240 VOL...

Hammer Price: 🔒

PHI B24-1-M4

PRESSES & FORMING

PHI B24-1-M4 50-TON HYDRAULIC PRESS, WITH 19" X 18" BED AREA, 1 HP MOTOR, 480/3 (739) S/N: 5964...

Hammer Price: 🔒

PHI 70-TON PRESS & PUMP (945)

PRESSES & FORMING

PHI 70-TON PRESS & PUMP (945)...

Hammer Price: 🔒

MISC

(1) 36'' X 36'' ELECTRIC HEAT PLATEN, (2) 36'' X 44'' STEAM PLATENS (965)...

Hammer Price: 🔒

CARVER

PRESSES & FORMING

CARVER LAB HYDRAULIC PRESS, WITH 12'' X 12'' ELECTRIC HEAT WATER COOLED PLATENS, ENERPAC HYDRAULIC C...

Hammer Price: 🔒

GATTO DPC101C5-1

MISC

GATTO DPC101C5-1 5' WATER VACUUM CALIBRATION EXTRUSION TANK, WITH 8" X 8" X 60" STAINLESS STEEL TANK...

Hammer Price: 🔒

WABASH 50-15-2M

PRESSES & FORMING

WABASH 50-15-2M 50-TON HYDRAULIC PRESS, WITH (2) 15 X 15 ELECTRIC HEAT PLATENS, LEFT TO RIGHT BETWE...

Hammer Price: 🔒

PHI 20-TON HYDRAULIC LAB PRESS

PRESSES & FORMING

PHI 20-TON HYDRAULIC LAB PRESS WITH (2) 8.5" X 8.5" ELECTRIC HEAT WATER COOLED PLATENS, DAMAGED HOOD...

Hammer Price: 🔒

DAKE 44058

PRESSES & FORMING

DAKE 44058 70-TON HYDRAULIC PRESS, S/N: 172321, WITH NO PLATENS, NO BOLSTER, LEFT TO RIGHT BETWEEN P...

Hammer Price: 🔒

BOLLING 200-TON HYDRAULIC PRESS

PRESSES & FORMING

BOLLING 200-TON HYDRAULIC PRESS & PUMP WITH (2) 24 X 24 ELECTRIC HEAT PLATENS 440 VOLT, 4 STRAIN ROD...

Hammer Price: 🔒

CARVER 9947.4D10A AUTOSERIES 25-TON HYDRAULIC SYSTEM

MATERIAL HANDLING & WAREHOUSE EQUIPMENT

CARVER 9947.4D10A AUTOSERIES 25-TON HYDRAULIC SYSTEM S/N: 9947-094, WITH 230 VOLT (869)...

Hammer Price: 🔒

BRABENDER SE UNIVEX

MISC

BRABENDER SE UNIVEX TAKE-OFF LAB ROLL SHEET STACK TAKE OFF, WITH (3) 8 CANS, 2 WITH ROTARY UNIONS, A...

Hammer Price: 🔒

ELMES 50-TON HYDROLAIR PRESS

PRESSES & FORMING

ELMES 50-TON HYDROLAIR PRESS WITH (2) 18 X 18 ELECTRIC HEAT WATER-COOLED PLATENS, 18.5 LEFT TO RIGHT...

Hammer Price: 🔒

2012

MEDICAL & BIOTECH EQUIPMENT

2012 POLYMER EXTRUSION WINDER WITH DUAL MOTORIZED SPINDLES, VARIABLE SPEED DIGITAL CONTROL PANEL (MO...

Hammer Price: 🔒

LITTLEFORD W10

PLASTICS PROCESSING EQUIPMENT

LITTLEFORD W10 POLYMER LAB MIXER WITH S/S, JACKETED BOWL, SIDE DISCHARGE WITH PLUG VALVE, CONTROL PA...

Hammer Price: 🔒

YOUNGSTOWN MILLER HT-90-1M

INDUSTRIAL AND COOLING HEATING EQUIPMENT

YOUNGSTOWN MILLER HT-90-1M 0 - 550 F 90 KW HOT OIL UNIT S/N: HT-1287, WITH 460/3/60, 121 AMP (838)...

Hammer Price: 🔒

1993 BABCOCK 465 KW

BOILERS

1993 BABCOCK 465 KW HOT OIL BOILER, S/N: RF22-47725, WITH 500F/265C, GAS FIRED BOILER, CONTROL PANEL...

Hammer Price: 🔒

WABASH 50-15-2TRM

PRESSES & FORMING

WABASH 50-15-2TRM 50-TON TRANSFER MOLDING PRESS S/N: 4391, WITH BOLSTER BED AREA: 15 X 15, NO PLATEN...

Hammer Price: 🔒

SCHERR TUMICO 22-3001

TEST, MEASUREMENT & QUALITY EQUIPMENT

SCHERR TUMICO 22-3001 14" OPTICAL COMPARATOR S/N: 6844402, WITH 120 VOLT...

Hammer Price: 🔒

MISC

ELECTRIC HEAT/WATER-COOLED PLATENS, 18.5" X 12.5" X 2.5", 240 VOLT...

Hammer Price: 🔒

IDE 8" X 40"

PLASTICS PROCESSING EQUIPMENT

IDE 8" X 40" EXTRUSION CLEATED BELT PULLER, WITH (2) 40 X 8 CLEATED BELTS CONTACT, ATTACHED CONTROL ...

Hammer Price: 🔒

MISC

119" X 13" X 6" STAINLESS STEEL WATER BATH, ON CASTERS, 250 LBS....

Hammer Price: 🔒

RDN VT08-02

MISC

RDN VT08-02 10' WATER VACUUM CALIBRATION EXTRUSION TANK, WITH STAINLESS STEEL TANK, 10 X 10 X 10 TAN...

Hammer Price: 🔒

MISC

STAINLESS STEEL EXTRUSION WATER TANK, WITH 6 X 11 X 118, ON CASTERS (801)...

Hammer Price: 🔒

EXTRUSION SERVICES 18'' EMBOSSED ROLL PULLER

MISC

EXTRUSION SERVICES 18'' EMBOSSED ROLL PULLER WITH 18 WIDE PULL ROLLERS, TENSION HOLDERS, IN LINE ROL...

Hammer Price: 🔒

MISC

SERVO PULLER CUTTER COMBO, WITH SERVO CUTTER, FLAT BELTS, CONTREX CONTROL (960)...

Hammer Price: 🔒

DAVIS STANDARD

PACKAGING EQUIPMENT

DAVIS STANDARD HEAT SEALER, WITH PROXIMITY SENSOR, ATTACHED COMPLETE CONTROL PANEL, ALL ASSEMBLED WI...

Hammer Price: 🔒

<< Previous 1 2 3 4 5 Next >>

Disclaimer: BidSeek aggregates publicly available auction and liquidation results from independent third-party sources for research and valuation reference only. BidSeek is not affiliated with, endorsed by, sponsored by, or operated in connection with any auction house, marketplace, or liquidation firm. All data and images are provided as-is for informational purposes and remain the property of their respective owners.

Recent Searches

Login

Reset Password

Leading Rubber Plastics Machinery Dealer Closing its Warehouse PEBSCO LLC

Save to Project Folder

Print Options

Save to Project Folder