Electronic Lab Test Measurement Equipment Day 1 of 3 day event

[CHEMGLASS CG-1759-06] ECO FUNNEL W/ CONTAINER CG-1759-50 MANUFACTURER: CHEMGLASS MODEL: CG-1759-06, CG-1759-50 DESCRIPTION: ECO FUNNEL W/ SECONDARY WASTE CONTAINER 4 INCH TOP DIAMETER THREAD SIZE 38-430 THE FUNNEL COMES WITH AN 11" TUBE 4L POLYPRO BOTTLE (NOT INCLUDED)

[BD] 309586 3ML SLIP TIP SYRINGE (76) - MANUFACTURER: BD MODEL: 31476 CONDITION: NEW OTHER. THESE SYRINGES ARE IN A NEW AND UNUSED COSMETIC CONDITION AND COME IN THE ORIGINAL SEALED BUBBLE WRAP PACKAGING. THE CONTAINER PACKAGING IS NON-ORIGINAL. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (76)6 3ML SLIP TIP SYRINGE SPECIFICATIONS: MANUFACTURER: BD MODEL: 309586 DESCRIPTION: SYRINGE 3ML SLIP TIP LATEX FREE DISPOSABLE SYRINGE NO NEEDLE SKU: V35H017 2B-06-04(1) 3LBS - 18IN X 12IN X 12IN

(1) TROX TVLK PLASTIC CIRCULAR AGGRESSIVE AIR EXTRACT VAV TERMINAL UNIT MANUFACTURER: TROX MODEL: TVLK DESCRIPTION: VAV TERMINAL UNIT NOMINAL SIZES: 250 MM SUPPLY VOLTAGE 24 V AC/DC VOLUME FLOW RATE RANGE: 30 546 L/S OR 108 1967 M3/H VOLUME FLOW RATE CONTROL RANGE: APPROX. 15 100 % OF THE NOMINAL VOLUME FLOW RATE MINIMUM DIFFERENTIAL PRESSURE: UP TO 139 PA (WITHOUT CIRCULAR SILENCER) MAXIMUM DIFFERENTIAL PRESSURE: 1000 PA CLOSED BLADE AIR LEAKAGE TO EN 1751, CLASS 4 CASING AIR LEAKAGE TO EN 1751, CLASS C 17LBS - 20IN X 20IN X 16IN

[OPTO ENGINEERING CMBS016] BEAM SPLITTER 45 BEAM SPLITTER W/ 37.7 MM DIA CLAMPING OPTICS MOUNT. MANUFACTURER: OPTO ENGINEERING MODEL: CMBS016 DESCRIPTION: BEAM SPLITTER MAIN OPTICAL SPECIFICATIONS COATING FRONT BEAM SPLITTER 50/50 @ 45, BANDWIDTH 430-670 NM COATING BACK NORMAL REFLECTANCE <0.5%, BANDWIDTH 430-670 NM CLEAR APERTURE (MM) 34.7 DEVIATION ANGLE (DEG) 90 MECHANICAL SPECIFICATIONS CLAMPING SIZE (MM) 37.7 CLAMPING SYSTEM LOCKRING LENGTH (MM) 85.8 WIDTH (MM) 64.0 HEIGHT (MM) 85.8 MASS (G) 464 WORKING DISTANCE DIFFERENCE (1) (MM) 52.2. CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THIS BEAM SPLITTER IS IN GOOD CONDITION WITH MINOR SCUFFS AND SCRATCHES ON THE HOUSING FROM PREVIOUS USE. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: THIS BEAM SPLITTER HAS BEEN PROFESSIONALLY CLEANED IN-HOUSE. A COMMON LASER POINTER WAS USED FOR A QUICK TEST AND THE BEAM SEEMED TO BE SPLIT PROPERLY, BUT NOTHING WAS MEASURED SCIENTIFICALLY. NO FURTHER TESTING WAS PERFORMED. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) OPTO ENGINEERING CMBS016 45 BEAM SPLITTER W/ 37.7 MM DIA CLAMPING OPTICS MOUNT. SKU: Y16S013 1B-03-02(2) 3LBS - 8IN X 8IN X 4IN

CORNING 431123 STERILE 500 ML PP CENTRIFUGE TUBES W/ CAP 6/PACK (6) - DESCRIPTION: CENTRIFUGE TUBES SUPPORT CUSHIONS (CATALOG NO. 431124 FOR 500) MUST BE USED WITH THIS PRODUCT UNLESS THE CENTRIFUGE ROTOR HAS APPROPRIATE V-BOTTOM CUSHIONS. HIGH-DENSITY POLYETHYLENE PLUG SEAL CAPS MAXIMUM RCF OF 6,000XG. TUBES ARE STERILE AND NONPYROGENIC CAP STYLE: PLUG SEAL CAP COLOR: ORANGE

1995 ORIEL 82520 SOLAR SIMULATOR W/ 68820 ADJUST. POWER SUPPLY. MANUFACTURER: ORIEL. SOLAR SIMULATOR WITH POWER SUPPLY AND TIMER LOT NOT WORKING! MODEL 82520 SOLAR SIMULATOR ACCEPTS ARC LAMP (ONE USED LAMP IS INCLUDED, CONDITION UNKNOWN) REQUIRES EXTERNAL POWER SUPPLY/CONTROLLER OUTPUT LENS: 6.8" DIAMETER MECHANICAL SHUTTER INSIDE REQUIRES GUARDS/OUTPUT SHIELD FOR SAFE USE, NOT INCLUDED! MODEL 84350 TIMER CONTROL SET 0.1 TO 999.9 SECONDS MANUAL OR AUTOMATIC SHUTTER CONTROL MODEL 68820 UNIVERSAL POWER SUPPLY FOR USE WITH ARC LAMPS FROM 400 TO 1000 WATTS ADJUSTABLE OUTPUT PRESS-TO-START LAMP IGNITER INPUT POWER: 220V 1PHASE 50/60HZ 10A. INCLUDED: (1) ORIEL MODEL 68820 UNIVERSAL POWER SUPPLY (1) ORIEL MODEL 84350 TIMER CONTROL (1) ORIEL MODEL 82520 SOLAR SIMULATOR.

(1) 21"L X 12"H X 5.5"W 5-SHELF LABORATORY FREEZER RACK 2.18" SHELF HEIGHT SPECIFICATIONS: MANUFACTURER: UNBRANDED MODEL: DOES NOT APPLY LABORATORY FREEZER RACKS LENGTH: 21" WIDTH: 5.5" HEIGHT: 12" MATERIAL: STAINLESS STEEL 5-SHELF DESIGN SKU: W38B007 2B-05-04(3) 15LBS - 25IN X 19IN X 11IN

[AGILENT] [33314-60012] [OPT 024] COAXIAL SPDT SWITCH DC TO 26.5 GHZ. MANUFACTURER: AGILENT MODEL: 33314-60012 OPTION: 024 DESCRIPTION: COAXIAL SPDT SWITCH FREQUENCY RANGE: DC TO 26.5 GHZ MAX RF POWER: 2W CW INSERTION LOSS (DB): 0.25 + 0.027 F (F IS FREQUENCY IN GHZ) TYPICAL INSERTION LOSS: 0.2 AT 4 GHZ 0.5 AT 20 GHZ 0.7 AT 26.5 GHZ ISOLATION (DB): 110 2.25 F (F IS FREQUENCY IN GHZ) TYPICAL ISOLATION: 120 AT 4 GHZ 90 AT 20 GHZ 60 AT 26.5 GHZ SWR: <1.25 DC AT 4 GHZ <1.45 4 TO 18 GHZ <1.7 18 TO 26.5 GHZ TYPICAL SWR: <1.15 DC TO 4 GHZ <1.3 4 TO 12.4 GHZ <1.4 12.4 TO 26.5 GHZ CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THIS SWITCH HAS MINOR MARKINGS FROM NORMAL USE AND SHOWS NO MAJOR DEFECTS THAT WOULD AFFECT FUNCTIONALITY. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: THIS SWITCH WAS REMOVED FROM A WORKING DECOMMISSIONED SYSTEM AND WAS VERIFIED PRIOR TO REMOVAL. NO ADDITIONAL TESTING WAS PERFORMED SUBSEQUENT TO ITS REMOVAL. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) AGILENT 33314-60012 OPT 024 COAXIAL SPDT SWITCH DC TO 26.5 GHZ SKU: S38U013 1E-10-03(8) 0LBS - 11IN X 7IN X 1IN

K&L MICROWAVE 4B114-60/20-0 BANDPASS FILTER SMA TUBULAR FIXED BANDPASS FILTER (HIGH PASS) NOMINAL FREQUENCY: 60 MHZ SMA (FEMALE) CONNECTORS BOTH ENDS DIMENSIONS: 31.6MM DIAMETER X 122.3MM LONG (PLUS CONNECTORS)

[EXFO S1000-IB] UV/VISIBLE INDUSTRIAL CURING SYSTEM - PARTS - MANUFACTURER: EXFO MODEL: S1000-IB CONDITION: FOR PARTS OR NOT WORKING. COMES IN NON-ORIGINAL PACKAGING. THE DEVICE IS IN USED CONDITION WITH SOME MINOR SCUFFS FROM PREVIOUS USE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THE UNIT WAS REMOVED FROM A DECOMMISSIONED LAB ENVIRONMENT. THE UNIT POWERS ON BUT HAS A BEEPING SOUND INDICATING THE NEED FOR A REPLACEMENT BULB. NO LIGHT GUIDE OR FOOT PEDAL IS INCLUDED WITH THE UNIT. WE ARE NOT SURE WHAT ELSE MAY BE WRONG. FOR THE AFOREMENTIONED REASONS, THE UNIT IS BEING SOLD AS/IS FOR PARTS OR REPAIR. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) EXFO S1000-IB UV/VISIBLE INDUSTRIAL CURING SYSTEM NO ACCESSORIES SPECIFICATIONS: MANUFACTURER: EXFO (PHOTONIC SOLUTIONS) SERIES: OMNICURE SERIES 1000 MODEL: S1000-IB OMNICURE UV/VISIBLE SPOT CURING SYSTEM LAMP TYPE: HIGH-PRESSURE 100W MERCURY VAPOR SHORT ARC POWER: 100-120VAC/200-240VAC, 50/60HZ FILTERS: 320-500NM STANDARD (INSTALLED) DIMENSIONS: 13.3" X 7.9" X 7.1" WARM-UP: 90 SECONDS LAMP HOURS: 1,113 SKU: X48B002 1E-07-03(1) 14LBS - 18IN X 12IN X 12IN

[JORDON SCIENTIFIC FT-2-TRG] LABORATORY REFRIGERATOR 50"W X 29"D INSIDE 43 CU. FT. - MANUFACTURER: JORDON SCIENTIFIC MODEL: FT-2-TRG CONDITION: USED. THIS REFRIGERATOR IS IN FAIR COSMETIC CONDITION, WITH LOTS OF SCUFFS/SCRATCHES (INCLUDING VERY HEAVY SCUFFING ON THE RIGHT SIDE), AND ADHESIVE TAPE RESIDUES. THE DISPLAY ON THE TEMPERATURE METER IS A LITTLE FUNKY, BUT STILL READABLE. THE BOTTOM INSIDE HAS LOTS OF DARK SCUFFS. THE LABELS INSIDE HAVE TEARS. THE STATED MEASUREMENTS ARE APPROXIMATE. WE DO NOT HAVE A KEY FOR THE FRONT DOOR LOCK. THERE ARE FUN COLORS OF RESIDUES IN AND ON THE DRAIN HOLE ON THE BACK. A LOT OF THE WIRES IN THE ELECTRONICS ON TOP ARE WRAPPED IN ELECTRICAL TAPE, WHICH DOESN'T LOOK GOOD BUT WORKS FINE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS REFRIGERATOR IS IN GOOD WORKING CONDITION. IT RUNS QUIETLY AND COOLS DOWN. DURING SEVERAL HOURS OF TESTING THE TEMPERATURE FLUCTUATED AT ABOUT 2OC TO 5OC. THE LIGHT INSIDE WORKS. THE DIGITAL TEMPERATURE METER WORKS, WHEN THERE IS ENOUGH LIGHT. THE CHART RECORDER TURNS, AND MOVES TO TEMPERATURE, BUT THERE IS NO PEN SO IT DOESN'T RECORD. THE DOORS OPEN QUIETLY. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) JORDON FT-2-TRG REFRIGERATOR SPECIFICATIONS: MANUFACTURER: JORDON SCIENTIFIC MODEL: FT-2-TRG LABORATORY REFRIGERATOR DUAL GLASS DOORS OPEN WIDE, CAN STAY 180O OPEN INTERIOR USABLE VOLUME: 50"W X 29"D X 50"H (REAR)/53" (FRONT) USABLE VOLUME: ABOUT 43 CUBIC FEET DOOR OPENINGS: 22.5"W X 58"H ABOUT 56" WIDE, 83" TALL OVERALL TOP-MOUNTED REFRIGERATION CIRCULAR CHART RECORDER DIGITAL TEMPERATURE METER (2) WIDE-OPENING GLASS DOORS (6) REMOVABLE WIRE RACK SHELVES ADJUSTABLE SHELF POSITIONS REFRIGERATION: R-134A POWER REQUIREMENT: 115V 1PHASE 60HZ 15A CASTERS FOR EASY RELOCATION SKU: Y21D010 6-BILR2(1) 560LBS - 65IN X 44IN X 91IN

3840 CELLINK 1000L CONDUCTIVE FILTERED NON-STERILE TIPS WITH FILTER TRAYS. MANUFACTURER: CELLINK. THESE TIPS AND TRAYS ARE IN A NEW AND UNUSED COSMETIC CONDITION AND COME IN THE ORIGINAL CELLINK CASE BOX THAT CONTAINS 8 SEALED BLISTER PACKS OF 5 RACKS. EACH RACK CONTAINS 96 TIPS. ROBOTIC CONDUCTIVE FILTER TIP W/ FILTER TRAY NON-STERILE 1000L 96 TIPS / HANGING TIP RACK FORMAT 5 TRAYS / BLISTER PACKETS 8 BLISTER PACKS / CASE 3840 TOTAL TIPS TIP COLOR BLACK RACK COVER CLEAR TIP SHAPE ROUND. SKU: W44H029. WEIGHT: 23LBS. DIMENSIONS: 25IN X 25IN X 20IN

TEKTRONIX P3010 PASSIVE VOLTAGE PROBES 100MHZ 10X ATTENUATION 300V (2) TEKTRONIX P3010 PASSIVE VOLTAGE PROBE FOR OSCILLOSCOPES BANDWIDTH: TO 100MHZ ATTENUATION: 10X MAXIMUM INPUT VOLTAGE: 300V CAT II

[DILLON M1 UNIVERSAL PULL FORCE TESTING MACHINE ANALOG DYNAMOMETER 0-200LBS-PARTS] MANUFACTURER: DILLON MODEL: M1 CONDITION: FOR PARTS OR NOT WORKING. THIS TESTER IS IN FAIR COSMETIC CONDITION WITH SEVERAL NOTABLE BLEMISHES FROM PRIOR USE. THE WORST IS THAT THE INDICATING NEEDLE IS MISSING. THE WORKPIECE-HOLDING CLAMP UNDER THE MEASURING HEAD IS MISSING. THERE IS SURFACE RUST ON CHROME-PLATED PARTS, AND HEAVIER RUST ON THE DRIVE SCREW, ESPECIALLY AT THE ENDS OF THE SCREW. THE SPIRIT LEVEL IS BUSTED. THE RAISE/LOWER SWITCH HANDLE IS BENT. THE MAIN ELECTRICAL POWER CABLE'S INSULATION IS BADLY CRACKED AND THE CABLE SHOULD PROBABLY BE REPLACED BUT IT WORKS. THERE IS NO PEN ON THE CHART RECORDER. THE MODEL NUMBER PLATE IS CLEARLY STAMPED BUT THE FONT IS NOT CLEAR AS TO WHETHER THIS IS MODEL M1 OR MI; WE GUESSED IT'S M1. ALSO, THE ENTIRE THING IS REALLY DUSTY. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS TESTER IS IN PARTIAL WORKING CONDITION. THE MOTOR ONLY RUNS IN THE "RAISE" DIRECTION. THE PEN CABLE IS DISCONNECTED FROM THE PENDULUM. THE CRYSTAL OVER THE GAUGE FACE, AND THE INDICATOR NEEDLE ARE MISSING! WHEN THE PENDULUM IS MOVED, THE NEEDLE'S MOUNTING STEM IN THE CENTER OF THE FACE ROTATES, SO IT WOULD AT LEAST GIVE READINGS IF THE NEEDLE WERE TO BE REPLACED. THE PULL TAB UNDER THE INDICATOR, WHICH WOULD MOUNT A CLAMP TO PULL YOUR TEST ARTICLES, HAS NO CLAMP ATTACHED. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) DILLON M1 UNIVERSAL TESTING MACHINE SPECIFICATIONS: MANUFACTURER: DILLON MODEL: M1 UNIVERSAL TESTING MACHINE PULL FORCE/STRENGTH TESTER LOOKS KINDA COOL IN A 1950S/1960S RETRO SORT OF WAY BIG THING, ABOUT 90" TALL! MASSIVE, OVER 200LBS! "MULTI-LOW-RANGE" RANGES: 0-10LBS X 0.05LBS 0-25LBS X 0.1LBS 0-50LBS X 0.2LBS 0-100LBS . 0.5LBS PURELY ANALOG READINGS WITH PROVISION FOR PEN TO MARK READINGS ON A PAPER CHART PEAK-HOLD OR INSTANTANEOUS READING CAPABILITY MOTOR MANUFACTURER: DOERR ELECTRIC CORPORATION GRAHAM TRANSMISSIONS MODEL 40987CJ721 INPUT: 115/230V 4.6/2.3A 60HZ 1/4HP FRAME K42CZ RATED FOR CONTINUOUS DUTY TYPE K SERVICE FACTOR: 1.25 INSULATION CLASS A THERMALLY PROTECTED NO INDICATOR NEEDLE! NOT WORKING RIGHT! SOLD AS-IS! SKU: W40D008 5K-19-01(1) 300LBS - 48IN X 40IN X 97IN

OLYMPUS U-D6REM SEXTUPLE OBJECTIVE TURRET MOTORIZED MICROSCOPE LENS NOSEPIECE - MICROSCOPE OBJECTIVE TURRET MOTORIZED NOSEPIECE (6) OBJECTIVE LENS POSITIONS RMS LENS MOUNTING THREAD COMPATIBLE WITH: BX AND MX SERIES (40.5MM DOVETAIL WIDTH) SLOT FOR FILTER OR ANALYZER INSERT (EMPTY INSERT INCLUDED) REQUIRES SEPARATE CONTROLLER (NOT INCLUDED) INCLUDED: (1) OLYMPUS U-D6REM OBJECTIVE NOSEPIECE (1) FILTER INSERT WITH LOCKING SCREW (1) CABLE ADAPTER TO DSUB 15 PIN CONNECTOR

[480] SARSTEDT 70.3050.200 PIPETTE TIP 1000L TRANSPARENT PCR PERFORMANCE TESTED. PIPETTE TIP MAX VOLUME: 1000L TRANSPARENT PCR PERFORMANCE TESTED DIAMETER: 9MM LENGTH: 72MM FILLING LEVEL RINGS GRADUATED POLYPROPYLENE (PP) (5) INDIVIDUALLY SEALES BOXES OF 96 PIPETTES

[FISHER SCIENTIFIC FBAC 1417 AUTORADIOGRAPHY CASSETTE] ELECTROPHORESIS SYSTEMS LEAD-LINED EASY TO CLOSE OR OPEN, EVEN IN THE DARKROOM, YET THEY LOCK OUT ALL LIGHT MATERIAL: ALUMINUM (3) FISHER SCIENTIFIC FBAC 1417 ELECTROPHORESIS SYSTEMS AUTORADIOGRAPHY CASSETTE SPECIFICATIONS: MANUFACTURER: FISHER SCIENTIFIC MODEL: FBAC 1417 DESCRIPTION: AUTORADIOGRAPHY CASSETTE

HP 6624A SYSTEM DC POWER SUPPLY FOUR, 40 WATT OUTPUTS MAXIMUM OUTPUTS: CHANNELS 1 & 2: 7V 5A / 20V 2A CHANNELS 3 & 4: 20V 2A / 50V 0.8A TWO RANGES FOR EACH OUTPUT (0-7V AND 0-20V, 0-20V AND 0-50V) INDIVIDUALLY PROGRAMMABLE OUTPUTS REMOTE SENSE CAPABLE GPIB COMMUNICATIONS RACK MOUNTING TABS AND SIDE HANDLES (NO FEET) POWER INPUT REQUIREMENT: 100/120/220/240 50/60HZ

[14G UPGRADE] AGILENT N4916B DE-EMPHASIS SIGNAL CONVERTER OPT 001 STD. MANUFACTURER: AGILENT MODEL: N4916B-ATO-99580. THIS CONVERTER IS IN FAIR COSMETIC CONDITION WITH MINOR SCUFFS/SCRATCHES FROM PRIOR USE. THE PRINTING ON ONE LABEL IS SMUDGED. THE CONVERTER POWERS ON AND GIVES A GREEN POWER LIGHT. THE LAN LIGHT EVENTUALLY COMES ON GREEN AND THE ACTIVITY LIGHT FLASHES AND GOES OUT WHEN A NETWORK CABLE IS PLUGGED IN. THE LEDS ON THE LAN JACK LIGHT UP. THE FAN MAKES A LITTLE RUBBING NOISE IF YOU MOVE OR REALLY TILT THE UNIT, BUT IT IS QUIET WHEN SITTING FLAT. MINIMUM FIRMWARE REQUIREMENT FOR N4903B IS 7.10. RUNS WINDOWS CE PRO 5.0. POWER REQUIREMENT: 100-240V 50/60HZ 80VA. WEIGHS 7LBS - DIMENSIONS: 16IN X 12IN X 8IN.

CRYOGENICS CFHT-11 STAINLESS STEEL FREEZER STORAGE RACK LOCKING RODS. FREEZER STORAGE RACK LOCKING RODS MATERIAL: STAINLESS STEEL LENGTH: 25-1/2" (647.7MM) BEND/HOOK: 7/8" (22.225MM). INCLUDED: (250) CRYOGENICS CFHT-11 STAINLESS STEEL FREEZER STORAGE RACK LOCKING RODS.

(1) FALCON 352075 PP CENTRIFUGE TUBE CONICAL BOTTOM 8/BAG W/ PLUG SCREW CAP 225ML SPECIFICATIONS: MANUFACTURER: FALCON MODEL: 352075 DESCRIPTION: PP CENTRIFUGE TUBE CONICAL BOTTOM W/ PLUG-SEAL SCREW CAP 225ML STERILIZED BY GAMMA IRRADIATION MOLDED GRADUATIONS POLYETHYLENE PLUG-SEAL CAP SKU: W47H006 2F-02-05(5) 3LBS - 12IN X 12IN X 10IN

[INOVYS] [ZFP OCELOT] AUTOMATED TEST EQUIPMENT HEAD W/ (4) PROBE CARD STIFFENERS - MANUFACTURER: INOVYS MODEL: ZFP OCELOT CONDITION: USED. THIS HEAD IS IN FAIR COSMETIC CONDITION WITH MINOR SCUFFS/SCRATCHES FROM PRIOR USE. THERE MAY BE A SMALL (SINGLE DIGITS) NUMBER OF POGO PINS MISSING FROM THE UNIT YOU RECEIVE. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: WE ARE NOT ABLE TO TEST THIS ITEM. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) INOVYS OCELOT ATE TESTING HEAD (4) PROBE CARD STIFFENER/MOUNT BRACKETS (1) PIN PROTECTOR SPECIFICATIONS: MANUFACTURER: INOVYS MODEL: ZFP OCELOT TESTING HEAD FOR AUTOMATIC TESTING EQUIPMENT 512 DATA CHANNELS DATA SPEED: UP TO 50MHZ EACH CHANNEL SUPPORTS AC AND DC FAULT COVERAGE IEEE-1450 STIL LANGUAGE SUPPORT CONNECTS TO COMPUTER (NOT INCLUDED) THROUGH USB LINK STIFFENERS ALLOW SIMPLE REPEATABLE MOUNTING OF YOUR PROBE CARD MADE IN THE USA SKU: Y11D002 1B-16-06(2) 220LBS - 48IN X 40IN X 40IN

[CHEMWEST PLASTIC TRANSPORTATION DESICCATOR CABINET 66" X 26" X 68"H W/6" CASTERS - MANUFACTURER: CHEMWEST MODEL: DOES NOT APPLY CONDITION: USED. THIS CABINET IS IN GOOD COSMETIC CONDITION WITH SCUFFS AND SCRATCHES FROM NORMAL USE. COMES IN NON-ORIGINAL PACKAGING. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: WE CONFIRMED THE FUNCTIONALITY OF THE DOORS, HINGES, AND LATCHES ON THIS CABINET. ADDITIONALLY, WE POWERED UP THE DESICCANT DEHUMIDIFIER ATTACHED TO THE SIDE OF THIS CABINET AND OBSERVED THE BLOWER EXPELLING AIR AND THE INTAKE PORT TAKING IN AIR. THE CASTERS ROLL SMOOTHLY. ONE SIDE OF THE DUAL DOORS NEEDS TO BE JIGGERED A LITTLE TO GET THE DOORS TO CLOSE AS THE DOORS ARE SLIGHTLY UN-SQUARE, BUT NOTHING SUPER SIGNIFICANT. NO ADDITIONAL TESTING WAS CONDUCTED. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) CHEMWEST PLASTIC TRANSPORTATION DESICCATOR CABINET 65-3/4"WX26"DX68"H 6" CASTERS SPECIFICATIONS: MANUFACTURER: CHEMWEST MODEL: DOES NOT APPLY DESCRIPTION: PLASTIC TRANSPORTATION DESICCATOR CABINET 65-3/4" W X 26" D X 68" H 6" CASTERS 2-SIDED 4-DOOR 2 HANGING HOOKS WHITE FLUSH MOUNT LATCHES NOVELAIR TECHNOLOGIES MODEL DH55 DESICCANT DEHUMIDIFIER 4.5A 115/220VAC 1PH 50/60HZ SKU: W20H007 6-BILR2(1) 450LBS - 87IN X 40IN X 82IN]

JULABO FP50-MH REFRIGERATED RECIRCULATING BATH MH CONTROLLER POWERS ON - PARTS - MANUFACTURER: JULABO MODEL: FP50-MH CONDITION: FOR PARTS OR NOT WORKING. THIS BATH IS IN FAIR COSMETIC CONDITION WITH SEVERAL NOTABLE BLEMISHES FROM PRIOR USE. THE TWO REMOVABLE SIDE PANELS ARE MISSING. THERE ARE LOTS OF SCUFFS/SCRATCHES AND STAINS IN THE PAINT. THERE ARE SOME MINOR RESIDUES IN THE BATH FROM PRIOR USE. THE COPPER LINES INSIDE HAVE SEVERAL SPOTS OF BLUE POWDERY CORROSION RESIDUES. THE SIGHT GLASS ON THE REFRIGERATION LINE SHOWS THE REFRIGERANT IS WET. THE SLOT ON THE OPERATOR FOR THE DRAIN VALVE IS BADLY DAMAGED. THERE IS NO CONNECTOR ON THE MAIN POWER CABLE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS UNIT IS IN AT-LEAST-PARTIAL WORKING CONDITION. WE DO NOT HAVE THE ALARM CABLE TO CONNECT THE CHILLER TO THE CONTROL HEAD, NOR DO WE HAVE THE PT100 EXTERNAL SENSOR THE UNIT WANTS, TO MAKE ITS ALARM GO AWAY. WHEN WE FIRST SWITCHED ON WITH AN EMPTY BATH, IT GAVE A LEVEL ALARM. WE FILLED THE BATH, THEN IT GAVE AN EXTERNAL SENSOR ALARM. WE ASSUME THIS MEANS IT IS LOOKING FOR A THERMOCOUPLE ON THE PT100 CONNECTOR AT THE REAR PANEL, WHICH WE DO NOT HAVE. THE DRAIN VALVE FOR THE BATH CANNOT BE TURNED. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) JULABO FP50-MH RECIRCULATOR SPECIFICATIONS: MANUFACTURER: JULABO MODEL: FP50-MH REFRIGERATED RECIRCULATING BATH DIGITAL MH-BASIS/1 CONTROL HEAD WITH PUMP, HEATER FP50 REFRIGERATION SECTION WITH BATH DIGITAL TEMPERATURE CONTROL, LARGE LED AND SMALL LCD DISPLAY SCREENS POWER: 230V 60HZ 3.2KW REFRIGERANT TYPE: R507 SKU: X26D004 5G-12-02(1) 185LBS - 48IN X 40IN X 40IN

[MICROMANIPULATOR 2450] SIDE-MOUNT PROBE POSITIONER MANIPULATOR - MANUFACTURER: MICROMANIPULATOR MODEL: 2450. CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. COSMETICALLY, THIS ITEM IS IN GOOD CONDITION. IT HAS SOME SCUFFS, SCRATCHES, TAPE RESIDUE, AND DUST FROM PREVIOUS USE. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: THE CONTROLS ON THIS UNIT TURN SMOOTH AND MOVE THE POSITIONER WITH EACH TURN. WE DID NOT HAVE THE VACUUM TO TEST THE BASE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) MICROMANIPULATOR 2450 POSITIONER / MANIPULATOR SPECIFICATIONS: MANUFACTURER: THE MICROMANIPULATOR COMPANY MODEL: 2450 TYPE: X-Y-Z PROBE POSITIONER / MANIPULATOR BASE: SIDE-MOUNT VACUUM BASE MOUNTS: LEFT-HANDED MAXIMUM TRAVEL: 0.25" (6.4MM) PER AXIS (X-Y-Z)

[HP 3478A] DIGITAL MULTIMETER DMM 5-1/2 DIGIT WITH HP-IB/GPIB 3.6 OHM SHORT -PARTS - MANUFACTURER: HEWLETT PACKARD HP MODEL: 3478A CONDITION: FOR PARTS OR NOT WORKING. COMES IN NON-ORIGINAL PACKAGING. THIS METER IS IN FAIR COSMETIC CONDITION. THE POWER BUTTON CAP IS BROKEN-OFF, BUT THE SWITCH STILL WORKS IF YOU PRESS IT WITH A POKEY THING. THE UNIT LOOKS AND FEELS DIRTY, AND HAS MANY MINOR SCUFFS/STAINS/SPOTS OF RESIDUES FROM PRIOR USE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS METER IS IN PARTIAL WORKING CONDITION. THE POWER-ON SELF-TEST GIVES A "SELF TEST OK" MESSAGE. THE BUTTONS ON THE CONTROL PANEL WORK, BUT SOME REQUIRE A VERY FIRM PRESS TO OPERATE. ALSO, WE FOUND THAT THE 2-WIRE OHMS RANGE WILL READ ABOUT 3.6 OHMS WITH A DEAD SHORT (INSTEAD OF ZERO OHMS). ALL THE OTHER MEASUREMENTS FROM THE FRONT PANEL INPUTS ON AC AND DC VOLTS, AC AND DC CURRENT, 2-WIRE AND 4-WIRE OHMS WERE CLOSE TO WHAT WE WOULD GET ON OUR REFERENCE METER. THE DISPLAY IS CLEAR AND EASY TO READ. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) HP 3478A MULTIMETER SPECIFICATIONS: MANUFACTURER: HEWLETT-PACKARD MODEL: 3478A DIGITAL MULTIMETER 3-1/2 TO 5-1/2 DIGIT RESOLUTION (USER SELECTABLE OR AUTORANGE) HP-IB/GPIB COMPATIBLE 2-WIRE SENSE HAS A PROBLEM (PLEASE READ) SKU: Y33D013

[SINGER 6600 SWEEP OSCILLATOR] ALFRED SWEEP OSCILLATOR/SWEEP GENERATOR MODEL 6608EDA ALFRED OSCILLATOR 0.01-4.2GHZ PLUGIN MANUAL ADJUSTMENTS SELECTABLE SWEEP DURATION OR MANUAL SWEEP

[METCAL BVX-201] SOLDERING VAPOR/FUME EXTRACTION SYSTEM PORTABLE, PLACED UNDER OR BEHIND A WORKSTATION OR DESK. FAN CAPACITY: 250 M3/H (150 CFM) FLOW RATE (WITH FILTER): 2 X 75M3/H (45 CFM) STATIC PRESSURE (SUCTION FORCE): 850 PA (3.5" WC) HEPA EFFICIENCY: 99.97 % AT 0.3 MICRON NOISE LEVEL: < 55 DBA. INCLUDES: (1) METCAL BVX-201 SOLDERING VAPOR/FUME EXTRACTION SYSTEM FILTER FAN (2) BVX-TB01 DESK MOUNTING HARDWARE AND CLAMPS (1) METCAL BVX-ARM FLEXIBLE EXHAUST ARM HOSE (1) METCAL BVX-ARML 5 FT. FLEXIBLE EXHAUST ARM HOSE (1) METCAL RPS-1 REMOTE POWER SWITCH (1) HEPA FILTER (1) POWER CORD (1) MANUAL. COMES IN ORIGINAL PACKAGING. OPEN BOX. 2 INLET HOSE LOCATIONS FOR UP TO 2 WORKSTATIONS POWER SWITCH ON ONE SIDE DIMENSIONS: 20" X 10" X 15"H POWER INLET: IEC 320 C14 JACK "REGULAR POWER CORD". 46LBS - 25IN X 25IN X 25IN

ADVANCED THERMAL EN-1000W TEMPERATURE CONTROL SYSTEM PELTIER WATER CHILLER-PARTS - MANUFACTURER: ADVANCED THERMAL SCIENCES ATS MODEL: EN-1000W CONDITION: FOR PARTS OR NOT WORKING. THIS CHILLER IS IN FAIR COSMETIC CONDITION WITH LOTS OF MINOR SCUFFS/SCRATCHES/DINGS FROM PRIOR USE. THE LIQUID FITTINGS LOOK PRETTY CLEAN INSIDE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS CHILLER IS NOT WORKING PROPERLY. THE CONTROLLER RESPONDS TO BUTTON PRESSES BUT NEVER STARTS COOLING. WE ARE NOT SURE WHY. WE FOUND THAT THE PUMP RUNS (BY MANUALLY OPERATING THE CONTACTOR). THE LOW COOLANT ALARMS WORK. WHEN POWER IS MIS-WIRED AN ANTI-PHASE MESSAGE IS DISPLAYED. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) ATS EN-1000W CHILLER SPECIFICATIONS: MANUFACTURER: ADVANCED THERMAL SCIENCES KOREA CORP MODEL: EN-1000W TEMPERATURE CONTROL SYSTEM (LIQUID CHILLER) THERMOELECTRIC SOLID STATE COOLING SYSTEM (NO COMPRESSOR OR REFRIGERANTS!) FOR USE WITH GALDEN, FLUORINERT, OR WATER/ETHYLENE GLYCOL TEMPERATURE RANGE: 10 TO 60 OC VOLTAGE: 220V 3PHASE 10A 50/60HZ COOLING CAPACITY: 800W @ 10O TO 2100W @ 60O USING GALDEN HT-200 PUMP CAPACITY: 10 LITERS/MINUTE UTILITY WATER REQUIREMENT: 10 LITERS/MINUTE PUMP: SPECK PUMPEN NPY-2251-MK.M3825 PUMP MOTOR: ATB 0.55KW 3PHASE MOTOR POWER SUPPLY: POWERNICS PNS-2030RH (? IT'S HARD TO READ) SKU: T53D002 5A-27-01(1) 190LBS - 48IN X 40IN X 41IN

[TOKYO ELECTRON LIMITED TEL] CPU-86 AND SLAVE CPU BRD BOARDS - MANUFACTURER: TOKYO ELECTRON LIMITED TEL MODEL: CPU-86 CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THESE BOARDS ARE IN GOOD COSMETIC CONDITION. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: WE ARE NOT ABLE TO TEST THESE CARDS. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) TEL CPU-86 (1) TEL SLAVE CPU BRD SPECIFICATIONS: MANUFACTURER: TOKYO ELECTRON LIMITED (TEL) CPU-86 BOARD 208-500381-3 281-500381- SLAVE CPU BRD 208-500694-2 281-500694- 28000565 SKU: W11D004 1D-02-03(1) 7LBS - 22IN X 15IN X 6IN

[BAILEY CONTROLS COMPANY] KM55A CHART RECORDER. MANUFACTURER: BAILEY CONTROLS COMPANY. COMPARABLE TO E101, KM55A. SPECIFICATIONS: 11" OUTER CIRCULAR FACE DIAMETER. OUTER DIMENSIONS: 15-1/2"L X 9"W X 19"H. 42LBS - 25IN X 25IN X 25IN.

SUPERLOK 3/8" STAINLESS STEEL FLEXIBLE TUBING HOSE 26"-36" 316 SDN (5) MANUFACTURER: SUPERLOK MODEL: UNKNOWN CONNECTION SIZE: 3/8" LENGTH: VARIOUS 26"-36" SKU: M44M018 1E-06-06(28) 6LBS - 40IN X 8IN X 8IN

[NEWPORT 415-SCH] PRECISION VERTICAL TRANSLATION STAGE LAB JACK 8MM TRAVEL 49X49MM - MANUFACTURER: NEWPORT MODEL: 415-SCH LAB JACK/VERTICAL MOTION STAGE PRECISION WEDGE JACK INTENDED FOR USE WITH MICROMETER ADJUSTER, NOT INCLUDED ROLLER BEARINGS ON ALL FRICTION SURFACES SPRING-LOADED FOR NEGLIGIBLE BACKLASH THK LINEAR MOTION GUIDES THREADED HOLES TOP AND BOTTOM FOR MOUNTING LOAD CAPACITY: 60 N TRANSLATION TRAVEL:8 MM OVERALL DIMENSIONS: 64 X 54 X 51 MM MOVING STAGE DIMENSIONS: 49 X 49 MM

[VWR 10111-940] SAFETY WASH BOTTLE 500ML - MANUFACTURER: VWR MODEL: 10111-940 CONDITION: USED. COMES IN ORIGINAL PACKAGING. THE BOTTLES COME IN ORIGINAL BAGS BUT SOME OF THE BAGS HAVE BEEN OPENED. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (21) VWR 10111-940 SAFETY WASH BOTTLE 500ML FOR SODIUM HYPOCHLORITE (BLEACH) SPECIFICATIONS: MANUFACTURER: VWR MODEL: 10111-940 DESCRIPTION: SAFETY WASH BOTTLE LOT #: J313196 CAT. #: 10111-940 500ML LABELED FOR BLEACH (SODIUM HYPOCHLORITE) SKU: V30O017 1E-15-04(1) 9LBS - 18IN X 18IN X 18IN

[1330FM] VWR SHEL LAB 1330FM SIGNATURE FORCED AIR SAFETY OVEN EXTERIOR: 21.25 X 23.75 X 33 (INCH) INTERIOR: 13 X 14 X 14.75 (INCH) 1.6 CUBIC FEET CAPACITY 40 DEGREES ABOVE AMB. TO 240 DEGREES C RANGE PN: 9071047 SKU: X04H025 5G-13-02(1) 180LBS - 48IN X 40IN X 41IN

VYDAC 218WP54 C18 REVERSED-PHASE COLUMN 4.6MM I.D. X 250MM WIDE PORE

[CONTROLLED ENVIRONMENTS] [I24L] ILLUMINATED TEMPERATURE/HUMIDITY TISSUE/PLANT GROWTH CHAMBER - PARTS - MANUFACTURER: CONTROLLED ENVIRONMENTS LTD. MODEL: I24L CONVIRON INCUBATOR HEATED/COOLED, HUMIDITY CONTROLLED, ILLUMINATED GROWTH ENVIRONMENT SHELF AREA: 24"W X 27.5"D X 46"H 11X14" INSULATED VIEWING WINDOW ON FRONT DOOR 23X45" SIDE WINDOWS FOR ILLUMINATION (8) FLUORESCENT 4' TUBE LAMPS (2) PASSTHROUGH PORTS ON BOTTOM/LEFT SIDE BRACKETS FOR ADJUSTABLE RACK SHELVES (1 WIRE SHELF INCLUDED) REFRIGERATION: R22 HEATER: 4.6A FACILITY REQUIREMENT: 120V 60HZ 18.3A PLUS DEMINERALIZED WATER THIS CHAMBER IS IN FAIR COSMETIC CONDITION. THERE ARE SOME ADHESIVE LABEL RESIDUES OUTSIDE, BUT THE WHOLE SYSTEM LOOKS PRETTY CLEAN AT A GLANCE. THE INSIDE HAS A MILD MUSTY/HUMID ODOR. THE DOOR AND DOOR SILL INSIDE HAVE WHAT APPEARS TO BE SPOTTY MOLD GROWING. THE LEFT SIDE LIGHTING DOOR HAS A MESSED UP BOTTOM LATCH (THE TOP LATCH HOLDS IT CLOSED). THERE IS SOME COMPONENT DISMOUNTED NEAR THE FRONT OF THE COMPRESSOR. PLEASE NOTE: WE DO NOT HAVE A KEY FOR THE DOOR LOCK. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS SYSTEM IS IN PARTIAL WORKING CONDITION. THE LAMPS ON THE LEFT SIDE DIDN'T LIGHT AND ONLY ONE BEGAN TO GLOW. THE LAMPS ON THE RIGHT ALL LIT UP. THE HEATER WAS ABLE TO INCREASE CHAMBER TEMPERATURE, BUT THE REFRIGERATION DOES NOT WORK. THE COMPRESSOR AND FAN HUM BUT DO NOT TURN. THE INTERNAL BLOWER DOESN'T RUN AT LOW SPEEDS, ONLY ABOUT 60% UP TO 100% BUT IT DOES RUN. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) CONVIRON 124L ENVIRONMENTAL CHAMBER (1) CHARACTERIZATION TABLE (1) ELECTRICAL SCHEMATIC (1) VARIABLE VOLTAGE CONTROL DIAGRAM (1) REFRIGERATION SCHEMATIC (1) CMP BLOCK DIAGRAM (1) INSTRUCTION LEAFLET ON HOW TO CHANGE PROGRAMS (1) PACK OF WET WICKS (1) KEY FOR CONTROLLER DOOR SKU: X06D012 5I-14-01(1) 725LBS - 49IN X 46IN X 87IN

[TEKTRONIX P6112] PASSIVE OSCILLOSCOPE VOLTAGE PROBES 100MHZ 10X ATTEN. (3) - MANUFACTURER: TEKTRONIX MODEL: P6112 CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THIS LOT IS IN FAIR COSMETIC CONDITION WITH BLEMISHES FROM PRIOR USE. THE BLACK PLASTIC ON THE PROBE BODIES HAS "DUST AND STUFF" EMBEDDED IN A WAY THAT MAKES IT SEEM LIKE THEY USED TO BE TACKY/STICKY, BUT IN OUR AIR-CONDITIONED SHOP THEY AREN'T CURRENTLY STICKY. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THESE PROBES ARE IN GOOD WORKING CONDITION. WE GAVE EACH A QUICK CHECK TO BE SURE IT PASSES SIGNAL (THEY DO). NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (3) TEK P6112 PROBES SPECIFICATIONS: MANUFACTURER: TEKTRONIX MODEL: P6112 PASSIVE VOLTAGE PROBE FOR OSCILLOSCOPES BANDWIDTH: TO 100 MHZ ATTENUATION: 10X MAXIMUM VOLTAGE: 300V CAT II

HAAKE VT 281-S VISCOMETER W/ SPINDLES, CONTROLLER, AND (1) PARTIAL STAND. INCLUDES: (2) HAAKE VT 281-S VISCOTESTERS / VISCOMETER, (2) HAAKE VS1 CONTROLLERS, (4) HAAKE SPINDLES, (1) HAAKE PARTIAL STAND, (1) HAAKE ANGLE UNION SPINDLE ATTACHMENT. VISCOMETER / VISCOTESTER TYPE: VT 281-S. CONTROLLER MODEL VS1 TYPE 001-4721 & TYPE 000-4721 115V / 60HZ VA10 SPINDLES PARTIAL STAND. THESE VISCOMETERS, CONTROLLERS, AND SPINDLES ARE IN GOOD COSMETIC CONDITION WITH SCUFFS AND SCRATCHES FROM NORMAL USE. THE VISCOMETERS ROTATE SMOOTHLY THROUGH THEIR RANGE. THE SPINDLES LOOK STRAIGHT AND TRUE. THE CONTROLLERS ARE IN GOOD COSMETIC CONDITION WITH SIMILAR SCUFFS AND SCRATCHES. THE POWER BUTTON SWITCHES SMOOTHLY. THERE IS A PARTIAL STAND INCLUDED WITH THIS LOT THAT IS MISSING THE VERTICAL BEAM. THE BASE AND THE SUPPORT RING ARE INCLUDED. SELLING FOR PARTS AND AS/IS.

[CORNING] [430776] STERILE 250 ML PP CENTRIFUGE TUBES 6/PACK - CENTRIFUGE TUBES SUPPORT CUSHIONS (CATALOG NO. 430236 FOR 250) MUST BE USED WITH THIS PRODUCT UNLESS THE CENTRIFUGE ROTOR HAS APPROPRIATE V-BOTTOM CUSHIONS. POLYETHYLENE PLUG SEAL CAPS. MAXIMUM RCF OF 6,000XG TUBES ARE STERILE AND NONPYROGENIC. TUBE STYLE: CENTRIFUGE BOTTOM STYLE: CONICAL TOP STYLE: THREADED GRADUATION INTERVAL: 25 ML STERILE: YES DISPOSABLE SKU: W48G004 2B-02-05(3) 15LBS - 25IN X 19IN X 16IN

[NIKON LU PLAN 10X OBJECTIVE LENS] NIKON LU PLAN 10X/0.30 EPI MICROSCOPE OBJECTIVE LENS INIFINITY CORRECTED 17.3MM - MANUFACTURER: NIKON MODEL: LU PLAN 10X CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THIS LENS IS IN GOOD COSMETIC CONDITION WITH ONLY MIONR BLEMISHES FROM PRIOR USE. THERE ARE SOME DINGS IN THE METAL BARREL. THE YELLOW STRIPE HAS SOME PLACES WHERE IT IS DAMAGED. THE GLASS APPEARS TO BE FREE OF CHIPS/NICKS/SCRATCHES/FUNGUS. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS LENS IS IN GOOD WORKING CONDITION. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) NIKON LU PLAN 10X OBJECTIVE LENS SPECIFICATIONS: MANUFACTURER: NIKON LU PLAN MICROSCOPE OBJECTIVE LENS MAGNIFICATION: 10X NUMERICAL APERTURE (N.A.): 0.30 INFINITY CORRECTED FOR USE WITHOUT A SPECIMEN COVER SLIP YELLOW COLOR IDENTIFICATION STRIPE WORKING DISTANCE: 17.3MM SKU: X18D006 1A-02-04-05(1) 2LBS - 6IN X 6IN X 4IN

HEWLETT PACKARD 6032A SYSTEM DC POWER SUPPLY 1000W 0-60V 0-50A 120V IN TRANSFORMER BAD -PARTS - MANUFACTURER: HEWLETT PACKARD HP MODEL: 6032A CONDITION: FOR PARTS OR NOT WORKING. COMES IN NON-ORIGINAL PACKAGING. THIS SUPPLY IS IN FAIR COSMETIC CONDITION WITH BLEMISHES FROM PRIOR USE, INCLUDING SCUFFS/STAINS/SCRATCHES. THE POWER INPUT FILTER COVER IS MISSING. THE VSENSE TERMINALS ARE CROOKED AND FEEL LOOSE; WE ARE NOT SURE IF THE PLASTIC OR THE WIRES ARE BROKEN, BUT SOMETHING IS NOT RIGHT BACK THERE. TRANSFORMER T3 INSIDE HAD A BLACK PLASTIC PART BROKEN OFF. THERE IS A LOOSE RATTLING SOUND FROM THIS PART. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS SUPPLY IS IN PARTIAL WORKING CONDITION. WE FOUND THAT IT WILL ONLY GIVE JUST OVER 12 AMPS OUTPUT AT 60 VOLTS, INSTEAD OF OVER 16 AMPS. AT LOW VOLTAGE IT WAS ABLE TO GIVE 50A. THE DISPLAYS ARE BRIGHT, AND THE FAN WORKS. NO OTHER TESTING WAS DONE. THIS IS BEING SOLD AS/IS. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) HP 6032A POWER SUPPLY SPECIFICATIONS: MANUFACTURER: HEWLETT PACKARD MODEL: 6032A SYSTEM POWER SUPPLY HP-IB COMMUNICATIONS/PROGRAMMING OUTPUT: 0 TO 60V DC, 0 TO 50 AMPS, 1064 WATTS MAX. INPUT: 120V 48-63HZ 24A MAX. NOT WORKING PROPERLY! SOLD AS-IS! SKU: Y33D026 1E-17-01(1) 39LBS - 23IN X 23IN X 10IN

[UNBRANDED] [DOES NOT APPLY] FIBER OPTIC ENDOSCOPY LAPAROSCOPY LIGHT CABLE 7' 3" BLUE. THIS CABLE IS IN VERY GOOD COSMETIC CONDITION WITH MINOR SCUFFS FROM NORMAL USE. COMES IN NON-ORIGINAL PACKAGING. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS CABLE WAS REMOVED FROM DECOMMISSIONED EQUIPMENT AND HAS NOT BEEN TESTED. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) UNBRANDED FIBER OPTIC ENDOSCOPY LAPAROSCOPY LIGHT CABLE 7' 3" BLUE SPECIFICATIONS: MANUFACTURER: UNBRANDED MODEL: DOES NOT APPLY DESCRIPTION: FIBER OPTIC ENDOSCOPY LAPAROSCOPY LIGHT CABLE 7' 3" BLUE SKU: W36H004 1A-04-04-04(1) 2LBS - 8IN X 8IN X 7IN

FMS EMGZ309.R.EIP DIGITAL SINGLE-CHANNEL MEASURING AMPLIFIER W/ ETHERNET/IP MANUFACTURER: FMS MODEL: EMGZ309.R.EIP DESCRIPTION: DIGITAL SINGLE-CHANNEL MEASURING AMPLIFIER W/ ETHERNET/IP NUMBER OF CHANNELS 1 NUMBER OF FORCE SENSORS 1 TO 2 PROCESSOR CYCLE TIME 1 MS VOLTAGE OUTPUT 0 TO 10 VDC, MIN. 1000 ?, 12 BIT CURRENT OUTPUT 0/4 TO 20 MA, MAX. 500 , 12 BIT DIGITAL INPUTS NONE RELAY OUTPUT NONE POWER SUPPLY 24 VDC (18 TO 36 VDC) RAIL MOUNT HOUSING

SIMCO 4009180 VISION CONTROLLER IONIZER 100-240VAC 50/60HZ 22W. MANUFACTURER: SIMCO MODEL: 80 DESCRIPTION: VISION CONTROLLER IONIZER 100-240VAC 50/60HZ 22W. SKU: X21G020 2D-01-02(1) 7LBS - 12IN X 12IN X 6IN

[BAASEL] 10200-090 GENERAL SCANNING GSI DUAL MIRROR GALVANOMETER - MANUFACTURER: BAASEL MODEL: 10200-090 CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THIS SCANNER IS IN FAIR COSMETIC CONDITION WITH MINOR SCUFFS/SCRATCHES/RESIDUES FROM PRIOR USE OUTSIDE. IT LOOKS PRETTY CLEAN INSIDE. THERE IS A SCRATCH ACROSS THE WIDTH OF THE SMALLER MIRROR (LOOK IN FROM THE CONNECTOR SIDE, IT'S THE MIRROR COATING MESSED UP IN A LINE ACROSS). THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS WAS REMOVED FROM A DECOMMISSIONED AB LASERS MARKING LASER SYSTEM AND NOT TESTED SEPARATELY. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) BAASEL 10200-090 SCAN HEAD SPECIFICATIONS: MANUFACTURER: BAASEL LASERTECH MODEL: 10200-090 LASER SCANNING HEAD FOR 2-AXIS CONTROL OF YOUR LASER OUTPUT BEAM FEATURES (2) GENERAL SCANNING MODEL 3008528 GALVANOMETERS AND BAASEL DRIVER BOARDS WATER COOLING BLOCKS CLAMP ON THE GALVO STEMS MODULAR CONSTRUCTION, THE DRIVER SECTIONS CAN BE REMOVED AND THE GALVOS ARE STILL MOUNTED! MODULES ARE ABOUT 100X100X115MM PLUS SIDE PLATES DSUB 15 PIN CONNECTIONS ON GALVOS FORMERLY USED WITH A 65W MARKING LASER SKU: X48D011 2B-03-02(1) 10LBS - 12IN X 12IN X 12IN

COLE-PARMER MASTERFLEX RAPID-LOAD PERISTALTIC PUMP W/ VARIABLE SPEED MOTOR. COLE-PARMER CP MODEL: RAPID-LOAD. MANUFACTURER: COLE-PARMER INSTRUMENT COMPANY. MASTERFLEX RAPID-LOAD PERISTALTIC PUMP. VARIABLE SPEED WITH 1/2HP DC MOTOR. FOR TUBING SIZES 86, 90, 88, AND 92. POWER: 115V 60HZ 10A. SPEED CONTROLLER: BOSTON GEAR RP1 RATIOPAX. MOTOR: MODEL 5775 SPEC. NO. 5329023 TOTALLY ENCLOSED, FAN-COOLED (TEFC) 90 VOLTS DC 6.4A 1/2 HORSEPOWER FRAME 56C. CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THIS PUMP IS IN FAIR COSMETIC CONDITION WITH LOTS OF CORROSION AND DEPOSITS FROM PRIOR USE. THE PAINT ON THE STEEL BASE IS FLAKING. THERE ARE SEVERAL CRACKS IN THE CLEAR PLASTIC PUMP COVER. THIS PUMP IS IN GOOD WORKING CONDITION. WE VERIFIED THE PUMP HEAD TURNS FROM MAXIMUM SPEED TO BARELY-ROTATING WITH JERKY ROTATION. THE OCCLUSION ADJUSTMENT WORKS. THE BOLT TO SECURE THE COVER IS LOOSE BUT WORKS WHEN TIGHTENED DOWN. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) COLE-PARMER RAPID-LOAD PUMP. SKU: W44D004 5I-14-02(1) 83LBS - 36IN X 25IN X 19IN

[PRA 66343] PRA 66343 TEMPERATURE TEST CHAMBER WITH BURN-IN BOARDS NO LOCAL CONTROL - MANUFACTURER: PRA MODEL: 66343 TEMPERATURE TEST CHAMBER CO2 OR LN2 COOLED SHIELDED HEATER ROD OPERATES IN REMOTE CONTROL MODE ONLY TEST CAVITY: 19"W X 25"H X 16" D RS-232 COM PORT INTERFACE CAN BE DAISY-CHAINED WITH MULTIPLE CHAMBERS FRONT PANEL STATUS INDICATORS STAINLESS STEEL INTERIOR POWER: 190 TO 260V 50/60HZ 6.5KVA MAXIMUM, SINGLE PHASE

[1/4"] CAJON ULTRA TORR VACUUM FITTINGS W/ WEED INSTRUMENTS 2443A (5) - MANUFACTURER: CAJON MODEL: ULTRA TORR VACUUM FITTING 1/4" SIZE MATERIAL: STAINLESS STEEL TEMPERATURE RATING: -25 TO 400 F MANUFACTURER: WEED INSTRUMENTS MODEL: 2443A RTD SENSORS RESISTANCE TEMPERATURE DETECTOR HIGH OUTPUT SIGNAL 3 WIRE LEADS TIME RESPONSE: 5 SECONDS

[NATIONAL INSTRUMENTS NI] [PXI-1031 OEM] PXI CHASSIS MAINFRAME 4-SLOTS S/N: 196848B-01. MANUFACTURER: NATIONAL INSTRUMENTS NI MODEL: PXI-1031 OEM PXI CHASSIS MAINFRAME WITH BACKPLANE AND POWER SUPPLY P/N: 196848B-01 4 SLOTS POWER: 100-240VAC 50/60HZ 4-2A