Electronic Lab Test Measurement Equipment Day 1 of 3 day event

[AGILENT 4294A] PRECISION IMPEDANCE ANALYZER 40HZ-110MHZ W/ OPT 1D5 TIME BASE. MANUFACTURER: AGILENT TECHNOLOGIES. MODEL: 4294A (4294A-CFG002). PRECISION IMPEDANCE ANALYZER WITH OPTION 1D5 HIGH STABILITY TIME BASE. TEST SIGNAL LEVEL RANGE: 5 MV TO 1V RMS, OR 200 UA TO 20 MA RMS. DC BIAS RANGE: 0 TO +/-40 V OR +/- 100 MA. POWER REQUIREMENT: 115-230V 50/60HZ 300VA MAX. CONDITION: USED. FAIR COSMETIC CONDITION. BOTTOM/LEFT CORNER OF THE FRONT PANEL'S METAL BEZEL HAS A SMALL BROKEN PLACE. DISPLAY COVER HAS SOME FUNK IN THE COATING THAT IS A MINOR DISTRACTION DURING USE. SCUFFS/SCRATCHES AND ADHESIVE LABEL RESIDUES HERE AND THERE, INCLUDING ON THE FRONT PANEL AND TOP. GOOD WORKING CONDITION AS FAR AS TESTED. INTERNAL SELF-TESTS PASS. SHOWN WAVEFORMS ON THE SCREEN WITH THE TERMINALS ALL OPEN AND ALL SHORTED. KEYS ALL RESPOND TO BEING PRESSED. SCREEN IS BRIGHT ENOUGH TO SEE, BUT NOT AS BRIGHT AS IT USED TO BE. ONE OF THE FEET LIKES TO FALL OFF. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) AGILENT 4294A ANALYZER. SKU: Y28D003.

[AGILENT 4294A] PRECISION IMPEDANCE ANALYZER 40HZ-110MHZ W/ OPT 1D5 TIME BASE, 801 - MANUFACTURER: AGILENT MODEL: 4294A CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THIS ANALYZER IS IN FAIR COSMETIC CONDITION. THE DISPLAY COVER HAS SOME FUNK IN THE COATING THAT IS A MINOR DISTRACTION DURING USE. THERE IS SMALL DUST BEHIND THE DISPLAY COVER. THERE ARE ALSO SCUFFS/SCRATCHES AND ADHESIVE LABEL RESIDUES HERE AND THERE, INCLUDING ON THE FRONT AND REAR PANELS, HANDLES, AND TOP. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS ITEM IS IN GOOD WORKING CONDITION AS FAR AS WE CAN TEST. WE ARE NOT EXPERTS IN THE USE OF THIS KIND OF EQUIPMENT AND DON'T HAVE PROPER FIXTURES. THE INTERNAL SELF-TESTS PASS. WE NOTED THE SHOWN WAVEFORMS ON THE SCREEN WITH THE TERMINALS ALL OPEN AND ALL SHORTED (PIC #4). THE KEYS ALL RESPOND TO BEING PRESSED. THE SCREEN IS RATHER DIM, BUT STILL USEABLE. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) AGILENT 4294A ANALYZER SPECIFICATIONS: MANUFACTURER: AGILENT TECHNOLOGIES MODEL: 4294A (CFG002) PRECISION IMPEDANCE ANALYZER 40HZ-110MHZ WITH OPTION: 1D5 HIGH STABILITY TIME BASE 801 BOTTOM FEET TEST SIGNAL LEVEL RANGE: 5 MV TO 1V RMS, OR 200 UA TO 20 MA RMS DC BIAS RANGE: 0 TO +/-40 V OR +/- 100 MA POWER REQUIREMENT: 115-230V 50/60HZ 300VA MAX. SKU: Y28D004 3A-04-01(1) 60LBS - 36IN X 25IN X 13IN

ROHDE & SCHWARZ FSL18 SPECTRUM ANALYZER - PARTS - MANUFACTURER: ROHDE & SCHWARZ R&S MODEL: FSL18 CONDITION: FOR PARTS OR NOT WORKING. COMES IN NON-ORIGINAL PACKAGING. THIS INSTRUMENT IS IN GOOD COSMETIC CONDITION WITH ONLY VERY MINOR BLEMISHES - IT WAS FORMERLY ENCLOSED IN A TEST EQUIPMENT RACK FOR ITS SERVICE LIFE, REMOTELY OPERATED, SO IT HASN'T SEEN SEVERE TREATMENT AT ALL. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS ANALYZER IS IN PARTIAL WORKING CONDITION. IT FAILS SELF-ALIGNMENT. THE FREQUENCY OF MEASUREMENTS IT GIVES ARE CLOSE TO OUR UNCALIBRATED SOURCE, BUT THE AMPLITUDE MEASUREMENTS FROM THIS INSTRUMENT ARE BOTH UNRELIABLE AND CONSISTENTLY WRONG. WE ARE ONLY ABLE TO GIVE SIGNALS OUT TO 12.5 GHZ AND THIS ANALYZER SAW THEM EASILY. HOWEVER, DURING ALL OUR TESTING THE AMPLITUDE MEASUREMENTS WERE CONSISTENTLY ABOUT 10 DB LOWER THAN THEY SHOULD READ. WE TOLD IT TO PERFORM A SELF-ALIGNMENT, WHICH RETURNED A FAILED RESULT AND IT THEN BEGAN GIVING A CONSTANT UNCAL MESSAGE ONSCREEN AS SHOWN. SELF-TESTS YIELD A "PASSED" RESULT, AND BOOT-UP DOESN'T SHOW ANY ERRORS. THERE WERE NO SYSTEM MESSAGES. CONTROLS RESPONDED TO USER INPUTS AS EXPECTED. WE ARE NOT SURE WHAT-ALL IS WRONG WITH THIS ANALYZER BUT IT DEFINITELY REQUIRES SERVICE BEFORE IT CAN GIVE MEANINGFUL MEASUREMENTS! BECAUSE IT IS NOT WORKING PROPERLY, THIS SALE WILL BE AS-IS. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) R&S FSL18 SPECTRUM ANALYZER SPECIFICATIONS: MANUFACTURER: ROHDE & SCHWARZ MODEL: FSL18 FSL-SERIES SPECTRUM ANALYZER BANDWIDTH: 9 KHZ TO 18 GHZ COLOR LCD DISPLAY CAN BE CONTROLLED VIA LAN OR IEEE BUS IN LINE WITH SCPI 19" RACK MOUNT ADAPTER 3U HIGH INSTALLED OPTIONS: B4 OVEN CONTROLLED CRYSTAL OSCILLATOR OCXO (STANDARD EQUIPMENT ON FSL18) B5 AUXILIARY IF'S IF OUTPUT/VIDEO OUTPUT, NOISE SOURCE CONTROL, TRIGGER INTERFACE, CONNECTION FOR NRP POWER SENSORS B7 NARROW RESOLUTION FILTERS B10 IEEE-488 GPIB IEC 625 INTERFACE R&S ANALYZER RUNS SEAMLESSLY ON WINDOWS XP EMBEDDED OPERATING SYSTEM POWER REQUIREMENT: 100-240V 50-60HZ OR 100-120V UP TO 400 HZ 200 VA FAILING ALIGNMENT, REQUIRES SERVICE! SOLD AS-IS SKU: X39D013 3A-01-04(1) 21LBS - 24IN X 24IN X 10IN

AGILENT 83496B CLOCK RECOVERY MODULE 3.5MM DIFFERENTIAL/SINGLE-ENDED. MANUFACTURER: AGILENT TECHNOLOGIES MODEL: 83496B CLOCK RECOVERY MODULE WITH PHASE NOISE ANALYSIS SUPPORTED DATA RATES: 50MB/S TO 7.1GB/S INPUT TYPE: 3.5MM ELECTRICAL MODULE DIFFERENTIAL OR SINGLE-ENDED 50 OHMS OUTPUTS AND INPUTS SMA 50 OHMS RECOVERED CLOCK OUTPUT 6VPP MAXIMUM

[TEKTRONIX 80E08] TDR REMOTE SAMPLING MODULE 30GHZ FAILED CALIBRATION CH.2 - PARTS - MANUFACTURER: TEKTRONIX MODEL: 80E08 CONDITION: FOR PARTS OR NOT WORKING. COMES IN NON-ORIGINAL PACKAGING. THIS LOT IS IN FAIR COSMETIC CONDITION WITH MINOR SCUFFS/SCRATCHES AND ADHESIVE LABEL RESIDUES FROM PRIOR USE. THIS UNIT CAME TO US WITH A REJECTED TAG FROM A CALIBRATION LAB, "CH2 FAILED, COULD NOT CALIBRATE", AND PAPERWORK SHOWING IT FAILING ON VARIOUS TESTS. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: WE ARE NOT ABLE TO TEST THIS MODULE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) TEKTRONIX 80E08 TDR SAMPLING MODULE SET SPECIFICATIONS: MANUFACTURER: TEKTRONIX MODEL: 80E08 ELECTRICAL SAMPLING REMOTE MODULE 2 INDEPENDENT TDR/SAMPLING CHANNELS BANDWIDTH TO 30 GHZ VERTICAL SENSITIVITY RANGES: 1MV/DIV TO 100MV/DIV SIGNAL CONNECTORS: 2.92MM (FEMALE) SMALL FORM FACTOR 2 METER LENGTH SKU: Y10D006 3A-04-02(1) 4LBS - 8IN X 8IN X 7IN

KEYSIGHT 34401A DIGITAL MULTIMETER DMM 6-DIGIT TRUE RMS WITH GPIB AND RS-232 - MANUFACTURER: KEYSIGHT MODEL: 34401A CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THIS METER IS IN GOOD OVERALL COSMETIC CONDITION, WITH MINOR STAINS ON THE BUMPERS. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS METER IS IN GOOD WORKING CONDITION. READINGS FROM THE FRONT AND REAR INPUTS ON THE DC VOLTS, AC VOLTS, DC CURRENT, AC CURRENT, FREQUENCY, 4-WIRE AND 2-WIRE OHMS SETTINGS WERE CLOSE TO THE READINGS WE WOULD GET ON OUR REFERENCE METER. SELF TESTS COME BACK "PASS". THE DISPLAY IS NICE AND BRIGHT ON ALL SEGMENTS. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) KEYSIGHT 34401A MULTIMETER SPECIFICATIONS: MANUFACTURER: KEYSIGHT MODEL: 34401A DIGITAL MULTIMETER 6-1/2 DIGIT RESOLUTION MEASURES: DC/AC VOLTAGE, DC/AC CURRENT, 2- AND 4-WIRE RESISTANCE, DIODE, CONTINUITY, FREQUENCY, PERIOD, DB, DBM BASIC ACCURACY: 0.0035% DC, 0.06% AC 1000 V MAX VOLTAGE INPUT, 3 A MAX CURRENT INPUT 1000 READINGS/SECOND 512 READING MEMORY GPIB AND RS-232 COMMUNICATIONS SKU: Y28D002 1E-07-03(1) 12LBS - 18IN X 12IN X 9IN

[AGILENT 34410A] AGILENT 34410A 6-1/2 DIGIT PERFORMANCE DIGITAL MULTIMETER WITH KEYLOGGER BRIGHT. MANUFACTURER: AGILENT TECHNOLOGIES. MODEL: 34410A DIGITAL MULTIMETER. 6-1/2 DIGITS. BRIGHT VFD DISPLAY. 14 MEASUREMENT FUNCTIONS INCLUDING CAPACITANCE AND TEMPERATURE. FRONT AND REAR INPUTS. DATA LOGGER WITH 50K READING NON-VOLATILE MEMORY. 50K READINGS/SEC @ 4-1/2 DIGITS TO THE PC, 10K/SEC @ 5-1/2 DIGITS, 1000/SEC @ 6-1/2 DIGITS. 1M READING MEMORY. ANALOG LEVEL AND PRE/POST TRIGGER. SYSTEM COMPATIBILITY: LAN (LXI COMPLIANT), USB, GPIB (IEEE-488). SHOCK-ABSORBING BUMPERS AROUND BOTH ENDS. FOLDING HANDLE/STAND. CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. FAIR COSMETIC CONDITION, WITH MINOR BLEMISHES FROM PRIOR USE. ONE LITTLE DIG ON THE DISPLAY COVER THAT DOESN'T SHOW UP IN NORMAL USE. FEW SPOTS OF ADHESIVE LABEL RESIDUE. METER IS IN GOOD WORKING CONDITION. READINGS FROM THE FRONT INPUTS ON THE DC VOLTS, AC VOLTS, DC CURRENT, AC CURRENT, FREQUENCY, 2- AND 4-WIRE OHMS, AND CAPACITANCE SETTINGS WERE CLOSE TO THE READINGS FROM A REFERENCE METER. REAR PANEL INPUTS WORK. DISPLAY IS CLEAR AND BRIGHT. CONTROLS RESPONDED AS EXPECTED TO USER INPUTS. FAN MAKES NORMAL (LOUD MOSQUITO) NOISES DURING OPERATION. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN.

[LAUTERBACH LA-7765] DEBUG CABLE JTAG-ARM11 W/ 7830A C55X 7977X TRACE 3711A CEVAX - MANUFACTURER: LAUTERBACH MODEL: LA-7765 CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THIS CABLE IS IN FAIR COSMETIC CONDITION, WITH SMALL SCUFFS/SCRATCHES AND MARKS FROM PRIOR USE. THE PLASTIC IS YELLOWED. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: WE ARE NOT ABLE TO TEST THIS ITEM. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) LAUTERBACH LA-7765 DEBUG ADAPTER SPECIFICATIONS: MANUFACTURER: LAUTERBACH MODEL: LA-7765 DEBUG CABLE ADAPTER ALSO MARKED: LA-7977X TRACE-LICENSE CEVAX LA-3711A JTAG CEVAX-A LA-7830A JTAG-C55X-A LA-7830A TMS320C55X SKU: Y32D008 2O-01-02(1) 2LBS - 6IN X 6IN X 4IN

[GRAS] [51AB-S1] SOUND INTENSITY CALIBRATOR FOR 1/2" DIAMETER MICROPHONES 110DB - MANUFACTURER: GRAS MODEL: 51AB-S1 CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THIS LOT IS IN GOOD COSMETIC CONDITION. THE PICTURES WE FOUND IN DATASHEETS ONLINE HAVE A BLACK PART COVERING THE ENTIRE END WHERE THIS ONE HAS SHINY METAL AND GROOVES - WE ARE NOT SURE WHAT THIS MISSING PART MAY BE. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: WE PUT A LOW-LEVEL SIGNAL FROM A FREQUENCY GENERATOR TO THE BNC INPUT OF THIS CALIBRATOR, AND A SOUND WAS EMITTED FROM THE CALIBRATOR. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1)GRAS 51AB-S1 SOUND INTENSITY CALIBRATOR SPECIFICATIONS: MANUFACTURER: G.R.A.S. SOUND & VIBRATION MODEL/TYPE: 51AB-S1 DESCRIPTION: SOUND INTENSITY CALIBRATOR 2-PORT COUPLER FOR PHASE AND LEVEL CALIBRATION OF SOUND INTENSITY MICROPHONE PAIRS FOR 1/2" MICROPHONES, OR 1/4" WITH AN ADAPTER (NOT INCLUDED) BNC CONNECTOR INPUT OUTPUT RATING: APPROXIMATELY 110DB (RE 20 PA) WITH 300MV RMS MAXIMUM INPUT: 1V RMS FREQUENCY RANGE: 50 TO 6300 HZ PRESSURE-INTENSITY INDEX: >27 DB SKU: W12H043 3A-02-03(1) 2LBS - 8IN X 8IN X 4IN

[GRAS 51AB] SOUND INTENSITY CALIBRATOR FOR 1/2" DIAMETER MICROPHONES 110DB. MANUFACTURER: G.R.A.S. SOUND & VIBRATION MODEL/TYPE: 51AB DESCRIPTION: SOUND INTENSITY CALIBRATOR 2-PORT COUPLER FOR PHASE AND LEVEL CALIBRATION OF SOUND INTENSITY MICROPHONE PAIRS FOR 1/2" MICROPHONES, OR 1/4" WITH AN ADAPTER (NOT INCLUDED) BNC CONNECTOR INPUT OUTPUT RATING: APPROXIMATELY 110DB (RE 20 PA) WITH 300MV RMS MAXIMUM INPUT: 1V RMS FREQUENCY RANGE: 50 TO 6300 HZ PRESSURE-INTENSITY INDEX: >27 DB. CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THIS SOUND INTENSITY CALIBRATOR IS IN GOOD COSMETIC CONDITION. THE PICTURES WE FOUND IN DATASHEETS ONLINE HAVE A BLACK PART COVERING THE ENTIRE END WHEREAS THIS ONE HAS SHINY METAL AND GROOVES - WE ARE NOT SURE WHAT THIS MISSING PART MAY BE. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: WE PUT A LOW-LEVEL SIGNAL FROM A FREQUENCY GENERATOR TO THE BNC INPUT OF THIS CALIBRATOR, AND A SOUND WAS EMITTED FROM THE CALIBRATOR. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) GRAS 51AB SOUND INTENSITY CALIBRATOR FOR 1/2" DIAMETER MICROPHONES 110DB. SKU: Y30S004 3A-06-02(2) 3LBS - 6IN X 6IN X 4IN

[NATIONAL INSTRUMENTS PXI-8175 EMBEDDED CONTROLLER] INTEL PC - MANUFACTURER: NATIONAL INSTRUMENTS NI MODEL: PXI-8175 CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THIS ITEM IS IN FAIR COSMETIC CONDITION WITH ONLY MINOR BLEMISHES FROM PRIOR USE. NOTE THAT THE HARD DRIVE HAS BEEN REMOVED TO MAINTAIN DATA SECURITY FOR THE PRIOR OWNER. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS ITEM IS IN GOOD WORKING CONDITION. IT POWERS ON AND LOADS A TEXT-BASED PROGRAM THAT WAS BEING USED BY THE PRIOR OWNER. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) NI PXI-8175 EMBEDDED CONTROLLER SPECIFICATIONS: MANUFACTURER: NATIONAL INSTRUMENTS MODEL: PXI-8175 EMBEDDED CONTROLLER FOR USE IN PXI CHASSIS CPU: PENTIUM III 866MHZ 128 MB RAM MODULE INSTALLED HARD DRIVE IS NOT INCLUDED POSSIBLY NOT WORKING, SOLD AS-IS! OTHER VISIBLE MARKINGS: 186179J-01 187317L-011 PXI-8171 I/O 186450-01 186448-01 187747E-01 702J-6637J 187863A-01 691907-128 703108A-01 SKU: X35D006 1E-07-01(1) 5LBS - 10IN X 10IN X 6IN

[HP 6032A] HP 6032A SYSTEM DC POWER SUPPLY 1000W 0-60V 0-50A 120VIN METERS INACCURATE-PARTS - MANUFACTURER: HEWLETT PACKARD HP MODEL: 6032A CONDITION: FOR PARTS OR NOT WORKING. COMES IN NON-ORIGINAL PACKAGING. THIS SUPPLY IS IN FAIR COSMETIC CONDITION, WITH LOTS OF MINOR SCUFFS/SCRATCHES AND RESIDUES FROM PRIOR USE. THE ADJUSTMENT KNOB IS MISSING, BUT THE SHAFT WORKS EASILY WITH LIGHT FINGERTIP PRESSURE. THERE IS A BROKEN CAP ON ONE OF THE SWITCHES. SEVERAL TERMINAL SCREWS ARE MISSING ON THE BACK PANEL. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS SUPPLY IS IN PARTIAL WORKING CONDITION. WE NOTED THAT, WITHOUT INCREASING THE CURRENT ADJUSTMENT, THE VOLTAGE WILL RISE WHEN INCREASED AND THEN FALL OFF. AFTER ADJUSTING THE CURRENT LIMIT TO ABOUT 0.03A, IT WAS ABLE TO INCREASE VOLTAGE NORMALLY. THIS SUPPLY WILL NOT BE FULLY ABLE TO SUPPLY AND MEASURE LOW-CURRENT OUTPUT! ALSO, WE NOTICED THE METERS ARE INACCURATE. THE VOLTAGE OUTPUT INDICATION IS ALWAYS HIGH, INCREASING TO ALMOST A FULL VOLT AT 60V (READS 60V, GIVES 60.8V). CURRENT INDICATION IS ALSO INACCURATE BUT NOT NEARLY AS BAD. WE ARE NOT ABLE TO TEST GP-IB OPERATION. USING THE FRONT PANEL KNOB, WE VERIFIED IT CAN GIVE 20A AT 60V AND 50A AT 20V. THE FAN WORKS. CONTROLS RESPOND AS EXPECTED TO USER INPUTS. THE DISPLAYS ARE BRIGHT. THERE IS A "HOT DUSTY" SMELL AFTER A SHORT TIME OF OPERATION AT FULL-POWER OUTPUT. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) HP 6032A POWER SUPPLY SPECIFICATIONS: MANUFACTURER: HEWLETT PACKARD MODEL: 6032A SYSTEM POWER SUPPLY HP-IB COMMUNICATIONS/PROGRAMMING OUTPUT: 0 TO 60V DC, 0 TO 50 AMPS, 1064 WATTS MAX. INPUT: 120V 48-63HZ 24A MAX. NOT WORKING PROPERLY! SOLD AS-IS! SKU: Y34D008 2B-04-01(1) 40LBS - 25IN X 19IN X 10IN

[HEWLETT PACKARD] 6032A SYSTEM DC POWER SUPPLY 1000W 0-60V 0-50A 120VIN BROKEN GROUND LUG-PARTS. MANUFACTURER: HEWLETT PACKARD HP MODEL: 6032A CONDITION: FOR PARTS OR NOT WORKING. COMES IN NON-ORIGINAL PACKAGING. THIS SUPPLY IS IN FAIR COSMETIC CONDITION, WITH LOTS OF MINOR SCUFFS/SCRATCHES AND RESIDUES FROM PRIOR USE. THE MAIN INPUT COVER IS MISSING. WHEN WE REMOVED THE POWER CABLE, THE GROUND TERMINAL'S SCREW BROKE OFF IN THE TERMINAL STRIP. THIS WILL NEED TO BE REPAIRED BEFORE THE UNIT CAN BE PUT BACK INTO SERVICE. THE PREVIOUS OWNER LEFT A STICKER ON THE FRONT SAYING IT HAS "SLOW PROGRAMMING RESPONCE". THIS SYSTEM IS IN AT-LEAST-PARTIAL WORKING CONDITION. WE WERE ABLE TO GET 20A AT 60V AND 50A AT 20V FOR A COUPLE OF MINUTES DURING TESTING. WE ARE NOT ABLE TO TEST THE HPIB PROGRAMMING, SO WE CAN'T VERIFY RESPONSE SPEED. NO FURTHER TESTING WAS PERFORMED. THIS IS BEING SOLD AS/IS FOR PARTS ORE REPAIR ONLY. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) HP 6032A POWER SUPPLY SPECIFICATIONS: MANUFACTURER: HEWLETT PACKARD MODEL: 6032A SYSTEM POWER SUPPLY HP-IB COMMUNICATIONS/PROGRAMMING (FAILED!) OUTPUT: 0 TO 60V DC, 0 TO 50 AMPS, 1064 WATTS MAX. INPUT: 120V 48-63HZ 24A MAX. NOT WORKING PROPERLY! SOLD AS-IS! SKU: Y34D002 2B-04-01(1) 40LBS - 23IN X 23IN X 10IN

[200W ADJUSTABLE REGULATED POWER SUPPLY] KEYSIGHT E3634A OCP FAULT MANUFACTURER: KEYSIGHT MODEL: E3634A OE3 CONDITION: FOR PARTS OR NOT WORKING. COMES IN NON-ORIGINAL PACKAGING. THIS SUPPLY IS IN FAIR COSMETIC CONDITION, WITH SCUFFS/SCRATCHES/RESIDUES FROM PRIOR USE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS SUPPLY IS NOT WORKING PROPERLY. IT HAS A CONSTANT MESSAGE "OCP TRIPPED" AND THE ERROR COMES BACK WHEN RESET. THE DISPLAY IS NICE AND BRIGHT. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) KEYSIGHT E3634A POWER SUPPLY SPECIFICATIONS: MANUFACTURER: KEYSIGHT MODEL: E3634A ADJUSTABLE REGULATED POWER SUPPLY OUTPUT: 200 WATTS TOTAL IN 2 VOLTAGE/CURRENT RANGES: 0-25V 0-7A OR 0-50V 0-4A GPIB AND RS-232 COMMUNICATIONS FRONT PANEL BANANA JACK BINDING POSTS OR REAR PANEL SPECIAL CONNECTOR OUTPUT VFD DIGITAL DISPLAY NOT WORKING! SOLD AS-IS! SKU: Y38D018 2O-03-03(1) 24LBS - 18IN X 12IN X 10IN

[KEYSIGHT E3634A] ADJUSTABLE REGULATED POWER SUPPLY OUTPUT: 200 WATTS TOTAL IN 2 VOLTAGE/CURRENT RANGES: 0-25V 0-7A OR 0-50V 0-4A GPIB AND RS-232 COMMUNICATIONS FRONT PANEL BANANA JACK BINDING POSTS OR REAR PANEL SPECIAL CONNECTOR OUTPUT VFD DIGITAL DISPLAY NOT WORKING! OCP TRIPPED, DIM! - FOR PARTS OR NOT WORKING. FAIR COSMETIC CONDITION, WITH SCUFFS/SCRATCHES/RESIDUES FROM PRIOR USE. THE SCREEN IS SO DIM, PICTURE 2 WAS TAKEN WITH THE LIGHTS OFF SO YOU CAN SEE THE ERROR MESSAGE. IT HAS A CONSTANT MESSAGE "OCP TRIPPED" AND THE ERROR COMES BACK WHEN RESET. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. SOLD AS-IS! SKU: Y38D019 2O-03-03(1) 24LBS - 18IN X 12IN X 10IN

[200W] KEYSIGHT E3634A ADJUSTABLE REGULATED POWER SUPPLY OUTPUT: 200 WATTS TOTAL IN 2 VOLTAGE/CURRENT RANGES: 0-25V 0-7A OR 0-50V 0-4A GPIB AND RS-232 COMMUNICATIONS FRONT PANEL BANANA JACK BINDING POSTS OR REAR PANEL SPECIAL CONNECTOR OUTPUT VFD DIGITAL DISPLAY. BLEW FUSE - PARTS - FOR PARTS OR NOT WORKING. THIS SUPPLY IS IN FAIR COSMETIC CONDITION, WITH SCUFFS/SCRATCHES/RESIDUES FROM PRIOR USE. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOT WORKING! AS INDICATED BY THE NOTE ON TOP, IT ARRIVED WITH A BLOWN MAIN INPUT FUSE. WE REPLACED THE FUSE AND SWITCHED ON, AND THE DISPLAY STARTED TO LIGHT UP ... AND THERE WAS A HISSING SOUND OF FIRE FROM INSIDE. WE SWITCHED OFF IMMEDIATELY AND REMOVED THE FUSE SO NOBODY CAN APPLY POWER. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) KEYSIGHT E3634A POWER SUPPLY. SPECIFICATIONS: MANUFACTURER: KEYSIGHT MODEL: E3634A SOLD AS-IS! SKU: Y38D017 2O-03-03(2) 26LBS - 18IN X 12IN X 10IN

[HEWLETT PACKARD 3314A FUNCTION GENERATOR SYNTHESIZER 20MHZ] FUNCTION GENERATOR/WAVEFORM SYNTHESIZER FREQUENCY RANGE: 0.001HZ TO 19.99MHZ AMPLITUDE RANGE: 0.01MVPP TO 10VPP INTO 50 OHMS SINE/SQUARE/TRIANGLE WAVES LIN/LOG SWEEPS, GATE, COUNTED BURST, AM/FM/VCO ARBITRARY WAVEFORM GENERATOR PHASE LOCK XN AND /N MODES, 1/2-CYCLE MODE AUTORANGING OR HOLD RANGE E34 AND E30 ERROR CODES. POWERS ON. SOLD AS-IS! S/N: E34, E30

[ROSEMOUNT] [1151DP5E12B2] PRESSURE TRANSMITTER SPECIFICATIONS: MANUFACTURER: ROSEMOUNT MODEL: 1151DP5E12B2 ALPHALINE TYPE: DP/GP RANGE: 5 MATERIAL: SST FILL: SIL EXPLOSION PROOF FOR CLASS I, DIV. 1, GROUPS B,C & D DUST IGNITION PROOF HAZARDOUS LOCATIONS OUTDOORS ADJUSTABLE PRESSURE TRANSMITTER SUPPLY: 45 VDC MAX OUTPUT: 4-20MA MAX W.P: 2000 PSI CAL. 0-750 IN H20. CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. IT HAS SCUFFS AND SCRATCHES FROM NORMAL USE. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: THIS ITEM WAS NOT TESTED BY US, SINCE WE DO NOT HAVE THE PROPER RESOURCES. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) ROSEMOUNT 1151DP5E12B2 PRESSURE TRANSMITTER SKU: R50L004 2F-06-03(2) 14LBS - 10IN X 10IN X 10IN

(1) ROSEMOUNT 3051 CD1A52A1AB4C6 PRESSURE TRANSMITTER MANUFACTURER: ROSEMOUNT MODEL: 3051 CD1A52A1AB4C6 3051 SERIES SMART FAMILY HART MAX W.P.: 2000 PSI/138 BAR INPUT: 10.5-42.4 VDC OUTPUT: 4-20MA CALIBRATION: 0-25 IN H20 RANGE: 1 / FILL S SKU: R42E017 2J-03-02(2) 9LBS - 10IN X 10IN X 10IN

[TEKTRONIX 464 STORAGE OSCILLOSCOPE DUAL TRACE W/DM 44 DIGITAL MULTIMETER] DUAL TRACE STORAGE OSCILLOSCOPE BANDWIDTH: 100MHZ @ 5 MV/DIV CHANNELS: 2. DIGITAL MULTIMETER RANGES: 0-1.2KV IN 5 STEPS (200MV, 2 V, 20 V, 200 V, AND 1.2 KV) RESOLUTION 100UV ACCURACY: WITHIN 0.1% OF READING, 1 COUNT. FOR PARTS OR NOT WORKING. COMES IN ORIGINAL PACKAGING. THIS OSCILLOSCOPE IS IN GOOD PHYSICAL CONDITION BUT THE INTENSITY KNOB HAS BEEN SNAPPED OFF, THE DELAY TIME POSITION AND THE SLOPE LEVEL KNOBS ARE CRACKED AND DAMAGED, AND THE FINE POSITION AND STORAGE LEVEL KNOBS ARE SLIGHTLY BENT. THE UNIT POWERS ON AND DISPLAYS AS INTENDED. THIS OSCILLOSCOPE IS NOT CALIBRATED. DUE TO THIS SCOPE HAVING BROKEN KNOBS AND A CUT WIRE IT IS BEING SOLD AS/IS FOR PARTS OR REPAIR. NO FURTHER TESTING WAS PERFORMED. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. AS/IS SPECIFICATIONS: MANUFACTURER: TEKTRONIX MODEL: 464 DESCRIPTION: STORAGE OSCILLOSCOPE BANDWIDTH: 100MHZ @ 5 MV/DIV CHANNELS: 2 DUAL TRACE MANUFACTURER: TEKTRONIX MODEL: 44 DESCRIPTION: DIGITAL MULTIMETER RANGES: 0-1.2KV IN 5 STEPS (200MV, 2 V, 20 V, 200 V, AND 1.2 KV) RESOLUTION 100UV ACCURACY: WITHIN 0.1% OF READING, 1 COUNT CALIBRATION ENDED ON 02/10/2013 SKU: Y16S014 1B-08-03(1) 33LBS - 25IN X 19IN X 13IN

[USED] LAUTERBACH LA-7690 POWERTRACE/ETHERNET UNIVERSAL NEXUS DEBUG CONTROLLER USB ETH. THIS CONTROLLER IS IN FAIR COSMETIC CONDITION, WITH SCUFFS/SCRATCHES AND MINOR RESIDUES ALL OVER. ONE OF THE FINS ON TOP IS BENT A LITTLE. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). UNIT POWERED ON WITH 7VDC, SHOWING SOLID AND BLINKING RED LIGHTS, AND THE FAN RAN QUIETLY. NO FURTHER TESTING WAS PERFORMED. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. SPECIFICATIONS: MANUFACTURER: LAUTERBACH MODEL: LA-7690 POWER TRACE/ETHERNET UNIVERSAL NEXUS/DEBUG CONTROLLER USB 2.0 INTERFACE MARKED: LA-7690 POWER-TRACE-ETH-512M SKU: Y32D002 1A-04-05-03(2). DIMENSIONS: 12IN X 6IN X 3IN. WEIGHT: 2LBS.

[LAUTERBACH LA-7705] LAUTERBACH LA-7705 DEBUG ETH POWER TRACE DEBUG MODULE, ETHERNET USB 2.0 INTERFACE MARKED: LA-7705 DEBUG-ETH PC-LAN POWER TRACE POWER DEBUG MODULE, ETHERNET USB 2.0

[LAUTERBACH LA-7690] POWERTRACE/ETHERNET UNIVERSAL NEXUS DEBUG CONTROLLER PC LAN - MANUFACTURER: LAUTERBACH MODEL: LA-7690. THIS CONTROLLER IS IN FAIR COSMETIC CONDITION, WITH SCUFFS/SCRATCHES AND MINOR RESIDUES ALL OVER. WE GAVE THIS UNIT 7VDC POWER AND IT HAD A SEQUENCE OF SOLID AND BLINKING RED LIGHTS, AND THE FAN RAN QUIETLY. WE ARE NOT ABLE TO DO FURTHER TESTING. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) LAUTERBACH LA-7690 SPECIFICATIONS: MANUFACTURER: LAUTERBACH MODEL: LA-7690 POWER TRACE/ETHERNET UNIVERSAL NEXUS/DEBUG CONTROLLER USB 2.0 INTERFACE MARKED: LA-7690 POWER-TRACE-ETH-512M SKU: Y32D003 1E-03-02(1) 2LBS - 12IN X 6IN X 3IN

[LAUTERBACH LA-7992] LAUTERBACH LA-7995A PREPROCESSOR FOR ARM AUTOFOCUS II FLEX. MANUFACTURER: LAUTERBACH. CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THIS ITEM IS IN GOOD COSMETIC CONDITION, WITH SMALL SCUFFS/SCRATCHES AND STAINS HERE-AND-THERE ALL OVER. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: WE ARE NOT ABLE TO TEST THIS MODULE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) LAUTERBACH LA-7002 PREPROCESSOR WITH LA-7995A. MANUFACTURER: LAUTERBACH. TYPE: LA-7992. MODEL: PP-ARM-ETM-AF-2 PREPROCESSOR FOR ARM WITH AUTOFOCUS. ALSO MARKED LA-7995. MODEL: PP-C55X-AF-2-ADD PREPROCESSOR FOR TMS320C5500 AUTOFOCUS II FLEX. SKU: Y32D006 1E-03-02(1) 2LBS - 8IN X 8IN X 4IN

[LAUTERBACH LA-7992] PREPROCESSOR FOR ARM AUTOFOCUS II PP-ARM-ETM-AF-2. MANUFACTURER: LAUTERBACH. TYPE: LA-7992 PREPROCESSOR FOR ARM WITH AUTOFOCUS. SPECIFICATIONS: MANUFACTURER: LAUTERBACH. TYPE: LA-7992 MODEL: PP-ARM-ETM-AF-2 PREPROCESSOR FOR ARM WITH AUTOFOCUS. SKU: Y32D004. 2LBS - 12IN X 6IN X 3IN

[BOROSIL 5340033] 5000ML 5L BOROSILICATE VACUUM FILTERING LAB FLASK W/ TUBULATION - MANUFACTURER: BOROSIL MODEL: 5340033 FOR VACUUM FILTRATION WITH SIDEARM TUBULATION CAPACITY: 5000 ML MATERIAL: 3.3 BOROSILICATE GLASS SHAPE IS DESIGNED FOR MAXIMUM MECHANICAL STRENGTH FOR USE WITH BUCHNER FUNNELS OR GOOCH CRUCIBLES SHAPE IS LIKE AN ERLENMEYER FLASK, WITH HOSE BARB NEAR THE TOP APPROXIMATE DIMENSIONS: 454 MM TALL, 237 MM OUTSIDE DIAMETER SPECIFICATION IS 390MM HIGH

[NEW] DERNORD 1.5 INCH TRI-CLAMP FILTER SS304 SANITARY FITTINGS INLINE STRAIGHT STRAINER. CONDITION: NEW OTHER. COMES IN OPENED PACKAGING. THIS STRAINER IS IN GOOD COSMETIC CONDITION WITH ONLY MINOR SCUFFS FROM HANDLING. IT LOOKS CLEAN INSIDE AND OUT. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) DERNORD 1.5" TRI-CLAMP STRAINER SPECIFICATIONS: MANUFACTURER: DERNORD 1.5" TRIPLE-CLAMP FILTER INLINE STRAIGHT STRAINER WITH SCREEN SS304 STAINLESS STEEL REMOVABLE SCREEN QUICK DETACH TRI-CLAMP HOUSING APPROXIMATELY 14.5" LONG, 4" DIAMETER TRI-CLAMP FILTER TUBE OD: 1.5" UNKNOWN SCREEN MESH SIZE (SORRY!) S/N: X002UDH4KZ SKU: Y13D013 2F-06-04(1) 9LBS - 18IN X 12IN X 12IN

[OMEGA AD128 HANDHELD ANALOG/DIGITAL DATALOGGER] PORTABLE HANDHELD ANALOG/DIGITAL DATALOGGER COMPACT AND LIGHTWEIGHT RECORDS VOLTAGE OR TEMPERATURE S/N: AD128C-10/AD128-10

DANAHER CONTROLS/DYNAPAR H221000100245 INCREMENTAL ENCODER 3/8" SHAFT 10-PIN 5-26VDC. MANUFACTURER: DANAHER CONTROLS MODEL: H221000100245 CONDITION: NEW OTHER. COMES IN NON-ORIGINAL PACKAGING. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) DANAHER CONTROLS/DYNAPAR H221000100245 INCREMENTAL ENCODER SPECIFICATIONS: MANUFACTURER: DANAHER CONTROLS BRAND: DYNAPAR MODEL: H221000100245 DESCRIPTION: INCREMENTAL ENCODER TERMINATION: 10-PIN (SIDE MOUNT) SENSING: OPTICAL SHAFT TYPE: SINGLE ENDED SHAFT DIAMETER: 3/8" INPUT VOLTAGE: 5-26VDC OUTPUT TYPE: DIFFERENTIAL OUTPUT VOLTAGE: 5VDC SIGNAL DIRECTION: BIDIRECTIONAL CONDITION: NEW QUANTITY: 1 SKU: P09P019 1A-02-05-03(1) 2LBS - 8IN X 8IN X 5IN

NATIONAL INSTRUMENTS 160960C-02 CCA, DFC INTERFACE FIXTURE PCB BOARD - MANUFACTURER: NATIONAL INSTRUMENTS (NI) MODEL: 160960C-02 DESCRIPTION: CCA, DFC INTERFACE FIXTURE WEIGHT: 0.20 LBS. CONDITION: NEW QUANTITY: 1 SKU: O45P018 1E-12-02(2) 3LBS - 12IN X 12IN X 4IN

NEW-HAKKO T7/T15-CF2 SOLDERING TIP FOR FM-202/FP-102 PART #: T7/T15-CF2 TIP SHAPE:2C CUT SURFACE PRE-TINNED FOR IRONS: HAKKO FM-203-HANDPIECE : HAKKO FM-2027(70W) HAKKO FM-204-HANDPIECE : HAKKO FM-2027(70W) HAKKO FX-950-HANDPIECE : HAKKO FM-2028(70W) HAKKO FX-951-HANDPIECE : HAKKO FM-2028(70W) HAKKO FX-952-HANDPIECE : HAKKO FM-2028(70W) HAKKO FM-202-HANDPIECE : HAKKO FM-2021(70W) OR HANDPIECE : HAKKO FM-2027(70W) NOTE: THE T15 TIPS HAVE REPLACED THE T7 TIPS. THE ONLY DIFFERENCE IS HAKKO HAS PHASED OUT THE BARCODE FROM THE TIPS. SEE THE HAKKO PRODUCT BULLETIN.

[NATIONAL INSTRUMENTS PXI-8156 EMBEDDED PXI CONTROLLER COMPUTER (NO HARD DRIVE)] MANUFACTURER: NATIONAL INSTRUMENTS NI MODEL: PXI-8156 CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THIS UNIT IS IN GOOD COSMETIC CONDITION ASIDE FROM THE EDGE NEAR THE OPENING FOR THE FLOPPY DRIVE, WHICH IS SLIGHTLY DENTED AND HAS HEAVY SCRATCHES ON THE CORNER. PLEASE NOTE THE HARD DRIVE WAS REMOVED TO PRESERVE DATA SECURITY FOR THE PREVIOUS OWNER. IT LOOKS LIKE THEY KEPT THE RAM ALSO. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS WAS REMOVED FROM A DECOMMISSIONED UNIT AND NOT TESTED SEPARATELY. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) NI PXI-8156 CONTROLLER SPECIFICATIONS: MANUFACTURER: NATIONAL INSTRUMENTS MODEL: PXI-8156 (184275C-01) EMBEDDED PXI SYSTEM CONTROLLER NO HARD DRIVE/RAM! SKU: O39D008 1D-03-03(1) 5LBS - 12IN X 12IN X 6IN

[NEW] VIEW SOLUTIONS MA321101 ANNULAR LIGHT GUIDE RING ASSEMBLY 58MM RING ID MANUFACTURER: VIEW SOLUTIONS MODEL: MA321101 ANNULAR LIGHT GUIDE RING ASSEMBLY RING INNER DIAMETER: 58 MM FIBER DIAMETER: 10 MM PVC TUBING AT 1 METER LENGTH FITS MOST MAJOR BRAND MICROSCOPES 5/8" ADAPTER ATTACHES TO FIBER OPTIC ILLUMINATOR UNITS

AGILENT TECHNOLOGIES 9301-6342 SOLVENT BOTTLE CLEAR 2L. SKU: U18H025 1E-03-03(1) 6LBS - 12IN X 12IN X 10IN

[LAERDAL 120-1050 LITTLE ANNE TRAING MANIKIN W/ AIRWAYS & CARRYING CASE] MANUFACTURER: LAERDAL MODEL: 120-1050 LITTLE ANNE CPR TRAINING MANIKIN TYPE: TORSO AIRWAY: NON-BREATHING, DISPOSABLE CAROTID PULSE: NO RIBS, XIPHOID: YES GASTRIC, DISTENSION SIMULATION: NO NAVEL: YES TONGUE/TEETH: NO CHART RECORDER: NO LIGHTBOX: NO, (AUDIBLE COMPRESSION CLICKER) METRONOME: NO A REALISTIC AIRWAY CONSTRUCTION MEANS THAT THE AIRWAY NATURALLY REMAINS OBSTRUCTED WITHOUT THE USE OF PROPER HEAD TILT, CHIN LIFT OR JAW THRUST. THIS LEADS TO MORE REALISTIC TRAINING AS CHEST RISE WILL BE SEEN WHEN CORRECT VENTILATIONS ARE MADE LITTLE ANNE'S ANATOMICALLY CORRECT TORSO AND STERNAL NOTCH ALLOW THE STUDENT TO PRACTICE IDENTIFICATION OF ALL ANATOMICAL LANDMARKS RELEVANT TO CONDUCTING ADULT CPR TRAINING REALISTIC ORAL AND NASAL PASSAGES ALLOW FOR MOUTH-TO-MOUTH VENTILATION INCLUDED: (1) LAERDAL 120-1050 LITTLE ANNE TRAINING MANIKIN (8) LAERDAL LITTLE ANNE AIRWAYS (1) CARRYING CASE SPECIFICATIONS: 15LBS - 32IN X 18IN X 12IN

[UNBRANDED] LONG TAPER .010" NEEDLES/PINS FOR VICE DIAMETER: 0.010" LENGTH: 1.50" TAPER: LONG TAPER MATERIAL: UNKNOWN (NON-FERROUS) SHAPE: CYLINDRICAL QUANTITY: 420 NEEDLES CONDITION: NEW OTHER

[ATLANTECH] [06-1003] FIBER OPTIC ENDOSCOPY LAPAROSCOPY LIGHT CABLE 9' 5" GRAY S/N: W36H001 1B-10-02(6) 3LBS - 10IN X 10IN X 4IN. MANUFACTURER: ATLANTECH MODEL: 06-1003 DESCRIPTION: FIBER OPTIC ENDOSCOPY LAPAROSCOPY LIGHT CABLE 9' 5" GRAY

[AGILENT TECHNOLOGIES 9301-6342] SOLVENT BOTTLE CLEAR 2L MANUFACTURER: AGILENT TECHNOLOGIES MODEL: 9301-6342 CONDITION: NEW. COMES IN ORIGINAL PACKAGING. THIS SOLVENT BOTTLE IS IN NEW COSMETIC CONDITION AND COMES IN THE ORIGINAL SEALED AGILENT BOX. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) AGILENT TECHNOLOGIES 9301-6342 2L CLEAR SOLVENT BOTTLE SPECIFICATIONS: MANUFACTURER: AGILENT TECHNOLOGIES MODEL: 9301-6342 DESCRIPTION: SOLVENT BOTTLE CLEAR 2L SKU: U18H024 1E-05-04(3) 5LBS - 12IN X 12IN X 9IN

[ATLANTECH] [06-1004.08/00] FIBER OPTIC ENDOSCOPY LAPAROSCOPY LIGHT CABLE 7' 2" GRAY

[RKC INSTRUMENT SA100] TEMPERATURE CONTROLLER W/ NAIS AT8-R11K RELAY SOCKET - MANUFACTURER: RKC INSTRUMENT MODEL: SA100 CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THERE ARE SCRATCHES ON THE OUTER ASSEMBLY FROM PREVIOUS USAGE. THE TEMPERATURE CONTROLLER IS IN GOOD CONDITION. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: THE TEMPERATURE CONTROLLER WAS PULLED FROM A WORKING ENVIRONMENT. NO TESTING WAS PERFORMED. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) RKC INSTRUMENT DELTA SA100 TEMPERATURE CONTROLLER MONITOR (1) NAIS AT-R11K RELAY SOCKET SPECIFICATIONS: MANUFACTURER: RKC INSTRUMENT MODEL: SA100 PID ACTION W/ AUTOTUNING (REVERSE ACTION) ALM1+ALM2 OUTPUT ASSIGNMENT CODE (2) RELAY CONTACT OUTPUTS VOLTAGE RATING: 24VAC/VDC PROCESS HIGH/LOW ALARMS RS-485 COMMUNICATION NOT WATERPROOF/DUSTPROOF AMBIENT TEMPERATURE: 50AC MAX. (1) NAIS AT-R11K RELAY SOCKET SKU: O12N011 1E-17-03(10) 2LBS - 8IN X 8IN X 4IN

VWR 89004-368 15ML PRESTERILIZED POLYPROPYLENE CENTRIFUGE TUBES (342) - MANUFACTURER: VWR MODEL: 89004-368 CONDITION: NEW. COMES IN ORIGINAL PACKAGING. THE TUBES ARE UNUSED. ONE BAG HAS BEEN OPENED AND SOME OF THE ORIGINAL QUANTITY WAS REMOVED, LEAVING ONLY 42 UNITS IN ONE BAG. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (342) NEW VWR 89004-368 15ML PRESTERILIZED POLYPROPYLENE CENTRIFUGE TUBES SPECIFICATIONS: MANUFACTURER: VWR MODEL: 89004-368 CENTRIFUGE TUBES WITH FLAT CAPS CAPACITY: 15 ML PRE-STERILIZED MATERIAL: POLYPROPYLENE COLOR: NATURAL, PURPLE CAP PROVIDES GOOD CHEMICAL AND PHYSICAL STRENGTH AND LOWER PROTEIN BINDING THAN POLYSTYRENE TUBES SKU: V31B018 2L-02-04(1) 11LBS - 25IN X 19IN X 15IN

[MEDLINE MDS9125] SPRAGUE RAPPAPORT STETHOSCOPE/SPHYGMOMANOMETER COMBO KITS ELITE SERIES COLOR: BLACK INCLUDES: COLOR-COORDINATED NYLON CARRYING CASE STETHOSCOPE SPHYGMOMANOMETER LATEX-FREE SKU: S07E010 2F-01-05(1) 5LBS - 12IN X 12IN X 12IN (2) MEDLINE MDS9125 SPRAGUE RAPPAPORT STETHOSCOPE/SPHYGMOMANOMETER COMBO KITS

PARTICLE MEASURING SYSTEMS LPS-A-110-LN-4CH LASER PARTICLE SENSOR 0.1-1.0:MICRON 115VAC 50-60 HZ 1.5 AMPS COMPLIES WITH: DHEW RADIATION PERFORMANCE STANDARDS 21CFR SUBCHAPTER J CONNECTIONS: HIGH GAIN SIGNAL OUT VACUUM NETWORK PORTS: IN & OUT S/N: 34768-0496-47

[CHEMGLASS] STAINLESS STEEL VACUUM FLASK 1:7"H 6.5"-I.D. 2:3; 1/4"H 4-3/8-I.D. (2) CHEMGLASS STAINLESS STEEL VACUUM FLASK 1:7"-HT 6.5"-I.D. 2:3-1/4"-HT 4-3/8-I.D. LARGER FLASK (APPROX. MEASUREMENTS): OUTER DIAMETER: 8-1/4" INNER DIAMETER: 6" OVERALL HEIGHT: 7-1/4" SMALLER FLASK (APPROX. MEASUREMENTS): OUTER DIAMETER: 5-1/4" INNER DIAMETER: 4-3/8" OVERALL HEIGHT: 3-1/4"

[KEYSIGHT 34450A DUAL DISPLAY DIGITAL MULTIMETER] 5.5-DIGITS WITH GPIB & USB OLED. MANUFACTURER: KEYSIGHT MODEL: 34450A. THIS METER IS IN GOOD COSMETIC CONDITION WITH ONLY MINOR SCUFFS/SCRATCHES FROM PRIOR USE. THE DISPLAY IS NICE AND BRIGHT. CONTROLS RESPOND TO USER INPUTS AS EXPECTED. DCV, ACV, DCI, ACI, 2W AND 4W OHMS, CAPACITANCE, AND FREQ READINGS ALL WERE CLOSE TO WHAT OUR REFERENCE METER WOULD SHOW. SELF TEST GIVES A PASS RESULT. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) KEYSIGHT 34450A MULTIMETER SPECIFICATIONS: MANUFACTURER: KEYSIGHT MODEL: 34450A DIGITAL MULTIMETER 5.5 DIGIT DISPLAY DUAL DISPLAY OLED DISPLAY USB 2.0, RS-232, AND GPIB (IEEE-488) PORTS BASIC STATISTICAL FUNCTIONS BUILT-IN HISTOGRAM DATALOGGER 11 MEASUREMENT FUNCTIONS: DC VOLTAGE DC CURRENT TRUE RMS AC VOLTAGE TRUE RMS AC CURRENT FREQUENCY CONTINUITY DIODE TEST CAPACITANCE TEMPERATURE. 11LBS - 16IN X 12IN X 8IN

[NTA INDUSTRIES 3106C5] NTA INDUSTRIES 3106C5 STAINLESS STEEL CLEAN ROOM 48"W PERFORATED DUAL LEAN RAIL - MANUFACTURER: NTA INDUSTRIES MODEL: 3106C5 CONDITION: USED. COMES IN NON ORIGINAL PACKAGING. THIS CLEAN ROOM RAIL IS IN GOOD CONDITION WITH MINOR SCUFFS AND SCRATCHES FROM PRIOR USE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) NTA INDUSTRIES 3106C5 ULTRACLEAN STAINLESS STEEL CLEAN ROOM PERFORATED LEAN RAIL SPECIFICATIONS: MANUFACTURER: NTA INDUSTRIES MODEL: 3106C5 CLEAN ROOM PERFORATED DUUBLE LEAN RAIL MATERIAL: STAINLESS STEEL FINISH: BRUSHED FLOOR MOUNTABLE NO. OF HOLES: 8 TOP RAIL: 48"W X 36"H LOWER RAILS: 48"W X 24"H LOWER RAILS ARE 10" APART FROM EACH OTHER SKU: Q19Y023 6-TRL 27(1) 155LBS - 57IN X 40IN X 42IN

2001 AIRFLOTEK BFM24LFGUE15 BLOWER MODULE 115VAC W/ ASTROCEL II ULPA FILTER 709 CFM. MANUFACTURER: AIRFLOTEK MODEL / P/N: BFM24LFGUE15 BLOWER FILTER MODULE DATE MANUFACTURED OCTOBER 2001 115 VAC 60HZ 1 PHASE 2.4 AMPS ASTROCEL II FILTER P/N: 24E89A2Z3E2 EFFICIENCY: 99.99999% (ULPA) RESISTANCE: .65 IN. W.G. TEST FLOW: 709 CFM SIZE: 23 5/8 X 47 5/8 X 2 3/4. 155LBS - 52IN X 28IN X 18IN.

[USED] APPLIED BIOSYSTEMS ABI GENEAMP PCR SYSTEM 9700 N8050200 2X96-WELL CYCLER AS-IS. THIS CYCLER IS IN GOOD COSMETIC CONDITION WITH ONLY MINOR BLEMISHES FROM PRIOR USE. THERE ARE MINOR SCUFFS/SCRATCHES/STAINS ALL OVER INCLUDING ONE HEAVY AND SEVERAL LIGHT "CLEANING" SCRATCHES ON THE DISPLAY THAT DO NOT INTERFERE WITH USING THE INSTRUMENT. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. THIS CYCLER IS IN GOOD WORKING CONDITION. WE REMOVED IT FROM A DECOMMISSIONED LAB AND GAVE IT A QUICK CHECK, VERIFYING IT STILL PASSES THE COOL AND HEAT RATE TEST AS WELL AS THE CYCLE PERFORMANCE TEST, THEN WE RAN A QUICK CUSTOM PROGRAM. EVERYTHING WORKED AS EXPECTED; NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) ABI GENEAMP PCR SYSTEM 9700 SPECIFICATIONS: MANUFACTURER: APPLIED BIOSYSTEMS MODEL: GENEAMP PCR SYSTEM 9700 P/N: N8050200 AUTOMATED THERMAL CYCLER DUAL ALUMINUM 96-WELL SAMPLE BLOCKS BLUE/WHITE LCD DISPLAY, PUSHBUTTON CONTROLS PCMCIA FLASH MEMORY CARD STORAGE/TRANSFER SLOT POWER: 100/120/220/230/240VAC 50/60HZ 725VA SKU: V50D016 2C-01-01(1) 33LBS - 24IN X 12IN X 12IN

INVITROGEN QUBIT 2.0 FLUOROMETER DNA RNA PROTEIN NO CAP S/N: W40H017 3A-10-03(1) 4LBS - 10IN X 10IN X 8IN. THIS FLUOROMETER IS IN GOOD COSMETIC CONDITION WITH SCUFFS AND SCRATCHES FROM REGULAR INDUSTRIAL USE. THE CAP / TOP HAT IS MISSING FROM THE UNIT AND IS NOT INCLUDED. COMES IN NON-ORIGINAL PACKAGING. WE PLUGGED IN THIS FLUOROMETER AND OBSERVED THE LED TOUCH SCREEN ILLUMINATE BRIGHTLY AND CLEARLY. WE WERE ABLE TO TOGGLE THROUGH THE INTERFACE UTILIZING THE TOUCH SCREEN. NO ADDITIONAL TESTING WAS PERFORMED. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) INVITROGEN / LIFE TECHNOLOGIES QUBIT 2.0 FLUOROMETER DNA RNA PROTEIN NO CAP. POWER ADAPTER INCLUDED.

[PUREAIRE 99091] DIGITAL OXYGEN ALARM INDICATOR DISPLAY. OPERATING TEMPERATURE:-40 TO +122F (-40 TO +50C) DISPLAY: 1 BRIGHT RED DIGITAL DISPLAY HORN: USER SELECTABLE ON/OFF HORN SOUND OUTPUT 80 85 DB LED LIGHTS: (2) RELAY LIGHTS, (1) FAULT LIGHT ALARMS: 2 USER-ADJUSTABLE, ALARM ABOVE OR BELOW THE SETPOINT POWER: 24VDC SUPPLY CONNECTED FROM O2 MONITORS