Electronic Lab Test Measurement Equipment Day 1 of 3 day event

[GREINER BIO-ONE 541070] 28 CM LONG BLUE STERILE CELL SCRAPER (100) - MANUFACTURER: GREINER BIO-ONE MODEL: 541070 CONDITION: NEW OTHER. COMES IN ORIGINAL PACKAGING. THIS ITEM IS IN NEW AND UNUSED CONDITION. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (100) GREINER BIO-ONE 541070 28 CM LONG BLUE STERILE CELL SCRAPER SPECIFICATIONS: MANUFACTURER: GREINER BIO-ONE MODEL: 541070 DESCRIPTION: 28 CM LONG BLUE STERILE CELL SCRAPER FOR A GENTLE MECHANICAL REMOVAL OF ADHERENT CELLS OPTIMIZED BLADE DESIGN FOR MAXIMUM CELL HARVEST MINIMAL MECHANICAL STRAIN PIVOT ANGLE 60 GUARANTEES UNIFORM CONTACT WITH THE GROWTH SURFACE, MINIMAL MECHANICAL STRAIN AND EFFICIENT CELL HARVEST, EVEN FROM POORLY ACCESSIBLE SURFACES MINIMIZES ANY ACCUMULATION OF THE CELL SUSPENSION TO THE BLADE STRUCTURE BLADE LENGTH: 1.8 CM 28 CM HANDHOLD LENGTH FOR CELL CULTURE FLASK HARVEST STERILE INDIVIDUAL PACKAGING SKU: W43G012 1B-16-03(1) 6LBS - 22IN X 15IN X 7IN

[NEW] 4TITUDE FRAMESTAR 96 BLUE SEMI-SKIRTED PCR PLATES 0.3ML W/COVERS (18) - MANUFACTURER: 4TITUDE MODEL: FRAMESTAR 96 PCR PLATES WITH CASES DESIGN: SEMI-SKIRTED COLOR: BLUE WELLS: 96 WELL VOLUME: 0.3 ML WORKING VOLUME: 0.2 ML REACTION SPEED: NORMAL MATERIAL: POLYPROPYLENE FOR USE WITH REAL-TIME PCR SYSTEMS OR THERMAL CYCLES

[AGILENT 6673A] SYSTEM DC POWER SUPPLY OUTPUT: 0-35V DC, 0-60A INPUT: 200-240V AC 50-60HZ 19A MAX. ANALOG VOLTAGE/CURRENT CONTROL GPIB PROGRAMMABLE BUILT-IN MEASUREMENTS & ADVANCED PROGRAMMABLE FEATURES OUTPUT TERMINALS CAN BE FLOATED UP TO +240VDC ABOVE GROUND REMOTE SENSING WITH RACK MOUNTING HARDWARE INSTALLED. MANUFACTURER: AGILENT MODEL: 6673A CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THIS SUPPLY IS IN FAIR COSMETIC CONDITION, WITH LOTS OF LONG, SCRATCHES ON TOP, AS WELL AS SCUFFS/SCRATCHES/RESIDUES ELSEWHERE FROM PRIOR USE. THE CALIBRATION LABEL IS CURRENT THROUGH LATE 2025 BUT WE DO NOT HAVE THE CERTIFICATE. NOTE: THE FRONT PANEL HAS WHAT LOOKS LIKE SPLASHES OF FLOOR WAX ALL OVER, IT DOES NOT CLEAN OFF WITH WATER ALCOHOL. THE POWER CABLE HAS BEEN CUT SHORT. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS WAS REMOVED FROM THE BOTTOM OF A RACK OF TEST EQUIPMENT, AND IS IN GOOD WORKING CONDITION AS FAR AS WE CAN TEST. WE DON'T HAVE A LOAD THAT WILL TAKE FULL POWER FROM THIS SUPPLY, BUT WE WERE ABLE TO USE OUR LOADS TO GET 8A @ 35V, 30A @ 10V, AND WE USED A FAT PIECE OF WIRE TO GET 60A AT A FEW MILLIVOLTS. THE VOLTMETER AGREES WELL WITH OUR MULTIMETER. THE VARIABLE SPEED FAN WORKS. THE ADJUSTMENT KNOBS WORK. THE KEYBOARD WORKS. WHEN ASKED TO REPORT ERRORS, IT SAYS "0". WE DID NOT TEST THE REAR PANEL COMMUNICATION INTERFACES. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) AGILENT 6673A POWER SUPPLY SPECIFICATIONS: MANUFACTURER: AGILENT MODEL: 6673A SYSTEM DC POWER SUPPLY OUTPUT: 0-35V DC, 0-60A INPUT: 200-240V AC 50-60HZ 19A MAX. ANALOG VOLTAGE/CURRENT CONTROL GPIB PROGRAMMABLE BUILT-IN MEASUREMENTS & ADVANCED PROGRAMMABLE FEATURES OUTPUT TERMINALS CAN BE FLOATED UP TO +240VDC ABOVE GROUND REMOTE SENSING WITH RACK MOUNTING HARDWARE INSTALLED SKU: Y40D002 2L-01-02(1) 62LBS - 36IN X 25IN X 9IN

HAKKO T7/T15-1601 SOLDERING TIP FOR FM-202/FP-102 SPECIFICATIONS: PART #: T7/T15-1601 TIP SHAPE: MICRO CO-AXIAL FOR IRONS: HAKKO FM-203-HANDPIECE : HAKKO FM-2027(70W) HAKKO FM-204-HANDPIECE : HAKKO FM-2027(70W) HAKKO FX-950-HANDPIECE : HAKKO FM-2028(70W) HAKKO FX-951-HANDPIECE : HAKKO FM-2028(70W) HAKKO FX-952-HANDPIECE : HAKKO FM-2028(70W) HAKKO FM-202-HANDPIECE : HAKKO FM-2021(70W) OR HANDPIECE : HAKKO FM-2027(70W) NOTE: THE T15 TIPS HAVE REPLACED THE T7 TIPS. THE ONLY DIFFERENCE IS HAKKO HAS PHASED OUT THE BARCODE FROM THE TIPS.

UNBRANDED FIBER OPTIC ENDOSCOPY LAPAROSCOPY LIGHT CABLE 8' GRAY. MANUFACTURER: UNBRANDED MODEL: DOES NOT APPLY DESCRIPTION: FIBER OPTIC ENDOSCOPY LAPAROSCOPY LIGHT CABLE 8' GRAY SKU: W36H002 1B-10-02(2) 3LBS - 10IN X 10IN X 4IN

[NORDSON EFD PERFORMUS III DISPENSER W/ FOOT SWITCH - PARTS] NORDSON EFD 7012332 PERFORMUS III DISPENSER W/ FOOT SWITCH - PARTS - MANUFACTURER: NORDSON EFD MODEL: 7012332 CONDITION: FOR PARTS OR NOT WORKING. COMES IN NON-ORIGINAL PACKAGING. THIS ITEM IS IN GOOD COSMETIC CONDITION WITH MINOR SCUFFS AND SCRATCHES. THERE IS A SMALL CRACK AND A PIECE OF THE HOUSING MISSING ON THE SIDE OF THIS UNIT AND IS BEING SOLD AS/IS. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS UNIT WAS POWERED ON WITH ONE OF OUR IN-HOUSE POWER ADAPTERS (NOT INCLUDED) AND THERE WAS NO RESPONSE OF ANY KIND FROM THE DISPENSER WE ARE NOT SURE WHY IT WOULDN'T TURN ON AND FOR THIS REASON, IT IS BEING SOLD AS/IS. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) NORDSON EFD PERFORMUS III DISPENSER 7012332 (1) NORDSON EFD 2015A FOOT SWITCH SPECIFICATIONS: MANUFACTURER: NORDSON EFD MODEL: 7012332 DESCRIPTION: PERFORMUS III DISPENSER W/ FOOT SWITCH & POWER SUPPLY DISPENSE TIME DISPLAY: DIGITAL AIR PRESSURE DISPLAY: DIGITAL ADJUSTABILITY: DISPENSE TIME; AIR PRESSURE; VACUUM MODES OF OPERATION: STEADY; TIMED TIME RANGE: 0-99.9 SECONDS AIR PRESSURE RANGE: 0-100 PSI (0-7 BAR) SKU: X48G017 2G-02-02(1) 7LBS - 16IN X 12IN X 8IN

[VWR SCIENTIFIC] 89011-728 GLOVE 3-BOX HOLDER / RACK WALL MOUNT - EPOXY WIRE WHITE. FOUR OF THESE RACKS ARE IN NEW COSMETIC CONDITION AND COVERED IN THE ORIGINAL SHRINK WRAP PACKAGING AND TWO ARE IN A USED COSMETIC CONDITION DUE TO MOUNTING MARKS AND COME UNWRAPPED. TWO UNITS INCLUDE MOUNTING SCREWS BUT THE OTHER UNITS ARE MISSING MOUNTING HARDWARE. INCLUDED: (6) VWR 89011-728 GLOVE 3-BOX HOLDER / RACK WALL MOUNT - EPOXY WIRE WHITE. SPECIFICATIONS: MANUFACTURER: VWR SCIENTIFIC MODEL: 89011-728 DESCRIPTION: GLOVE 3-BOX HOLDER / RACK WALL MOUNT EPOXY WIRE WHITE SKU: W43H027 1D-03-04(1) 10LBS - 20IN X 20IN X 20IN

[19" RACK MOUNT 1U] SORENSEN DCS20-50E DC POWER SUPPLY 20V 50A 1000W DCS 20-50E M119 MANUFACTURER: SORENSEN MODEL: DCS20-50EM1M119 CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THIS SUPPLY IS IN GOOD COSMETIC CONDITION WITH ONLY MINOR BLEMISHES FROM PRIOR USE, INCLUDING SCUFFS/SCRATCHES AND SOME DAMAGE ON THE LABELS. THE MAIN INPUT TERMINAL HAS ONE TAB BROKEN OFF. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: THIS POWER SUPPLY IS IN GOOD WORKING CONDITION AS FAR AS WE CAN TEST. WITH THE DSUB CONNECTOR JUMPERED APPROPRIATELY, WE WERE ABLE TO USE OUR LOAD TO SINK 50 AMPS FROM 4 VOLTS TO 20 VOLTS OUTPUT. WITH NO DIFFICULTY. THE DISPLAY IS BRIGHT AND CLEAR. THE ADJUSTMENTS WORK FINE, BUT THEIR LOCK NUTS WILL SOMETIMES INCREASE FRICTION AND REQUIRE AN 11MM WRENCH OR SMALL PLIERS TO RELEASE. WE ARE NOT ABLE TO TEST THE SERIAL AND IEEE-488 INTERFACES. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) SORENSEN DCS 20-50E POWER SUPPLY SPECIFICATIONS: MANUFACTURER: ELGAR SORENSEN MODEL: DCS20-50E (FULL MODEL DCS20-50EM1M119) DCS-SERIES ADJUSTABLE DC POWER SUPPLY WITH GPIB/IEEE-488, RS-232, RS-485 INTERFACES SIMULTANEOUS REAL-TIME VOLTAGE AND CURRENT LED METERS INPUT: 115/230V 50/60HZ 20/10A (CURRENTLY WIRED FOR 115V) OUTPUT: 0-20VDC 0-50A 1000W OVER VOLTAGE PROTECTED 10-TURN FRONT PANEL VOLTAGE/CURRENT LIMIT CONTROLS CAPABLE OF REMOTE OPERATION/PROGRAMMING SKU: Y37D013

[KEPCO HSF 15-22] DC POWER SUPPLY MODULE 15V 22A 300W OUT, 100-240VAC. MANUFACTURER: KEPCO MODEL: HSF 15-22 CONDITION: NEW. COMES IN FACTORY SEALED PACKAGING. INCLUDED: (1) KEPCO HSF 15-22 15 VOLT / 22 AMP / 300 W DC POWER SUPPLY MODULE SPECIFICATIONS: MANUFACTURER: KEPCO MODEL: HSF 15-22 REV. 3 DESCRIPTION: DC POWER SUPPLY AC LINE INPUT VOLTAGE UNIVERSAL / 100 V TO 240 V /1 PH INSTRUMENT PROFILE MODULE NUMBER OF OUTPUTS 1 RATED OUTPUT POWER (WATTS) 300 W MAXIMUM DC CURRENT 22 A DC MAXIMUM DC VOLTAGE 15 V DC

[WELLER WSA350] BENCHTOP SMOKE FLUX FUME EXTRACTOR ABSORBER CARBON FILTER 120V 20W. MANUFACTURER: WELLER MODEL: WSA350. THIS EXTRACTOR IS IN GOOD COSMETIC CONDITION WITH SCUFFS AND SCRATCHES FROM REGULAR INDUSTRIAL USE AND COMES IN NON-ORIGINAL PACKAGING. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). WE PLUGGED IN THIS EXTRACTOR AND TURNED ON THE POWER TO OBSERVE THE FAN TURN WITH POWER AND AIR EJECT FROM THE REAR. NO ADDITIONAL TESTING WAS PERFORMED. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) WELLER WAS350 BENCHTOP SMOKE FLUX FUME EXTRACTOR ABSORBER CARBON FILTER 120V 20W SPECIFICATIONS: MANUFACTURER: WELLER MODEL: WAS350 DESCRIPTION: BENCHTOP SMOKE FLUX FUME EXTRACTOR ABSORBER CARBON FILTER 120V 20W SKU: X25H020 2B-05-01(3) 7LBS - 12IN X 12IN X 12IN

NEW-HAKKO T7/T15-1204 SOLDERING TIP FOR FM-202/FP-102 SPECIFICATIONS: PART #: T7/T15-1204 TIP SHAPE: QUAD SIZE: 17.9 X 17.9 FOR IRONS: HAKKO FM-203-HANDPIECE : HAKKO FM-2027(70W) HAKKO FM-204-HANDPIECE : HAKKO FM-2027(70W) HAKKO FX-950-HANDPIECE : HAKKO FM-2028(70W) HAKKO FX-951-HANDPIECE : HAKKO FM-2028(70W) HAKKO FX-952-HANDPIECE : HAKKO FM-2028(70W) HAKKO FM-202-HANDPIECE : HAKKO FM-2021(70W) OR HANDPIECE : HAKKO FM-2027(70W) NOTE: THE T15 TIPS HAVE REPLACED THE T7 TIPS. THE ONLY DIFFERENCE IS HAKKO HAS PHASED OUT THE BARCODE FROM THE TIPS.

THERMO ION TORRENT GENESTUDIO S5 SEQUENCER 7749 NGS - MANUFACTURER: THERMO MODEL: 7749 CONDITION: USED. THIS SYSTEM IS IN GOOD COSMETIC CONDITION. THE PROTECTIVE FILMS ARE STILL ON THE FRONT PANELS AND MOST OF THE BOXES OF CONSUMABLES ARE UNOPENED. WE THINK IT MAY NOT HAVE BEEN USED, EVER, BUT ARE NOT SURE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS SYSTEM WAS TAKEN FROM A DECOMMISSIONED LAB AND IS EITHER UNUSED OR EXTREMELY WELL TAKEN CARE OF. THE WORST COSMETIC BLEMISH WE COULD FIND WAS A SMUDGE FROM A DIRTY GLOVE FROM MOVING THIS TO OUR FACILITY! THERE ARE NO STORED DATA AND THE SERVICE OPTIONS SCREEN SEEMS TO INDICATE NO RUNS WERE EVER PERFORMED. WE ARE NOT SURE, THOUGH, SO WE ARE BILLING THIS AS A "USED" SYSTEM. THE COMPUTER BOOTS AND LOADS THE SOFTWARE SUCCESSFULLY AND THE TOUCH SCREEN RESPONDS TO USER INPUTS AS EXPECTED. THE DOOR LOCK/UNLOCK WORKS. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) A37904 GENESTUDIO S5 SEQUENCER (1) CERTIFICATE OF CONFORMANCE FROM MARCH 2019 (2) A27767C ION S5 SEQUENCING SOLUTIONS (EXP. 2020-07-31) (4) A30673 ION S5 EXT CHEF SUPPLIES (EXP. 2021-08-31) (1) A27765 ION 540 CHIP KIT 4 PACK (EXP. 2020-06-30) (1) A27763 ION 530 CHIP KIT 4 PACK (EXP. 2020-08-31) (2) A28308 ION S5 CARTRIDGE TOOL (3) A29022 ION CHEF S5 SERIES CHIP BALANCE (1) A27754 ION S5 CHEF SOLUTIONS (EXP. 2020-06-30) (1) 4488382 ION CHEF INSTALL SUPPLIES (EXP. SEP 2020) SPECIFICATIONS: MANUFACTURER: THERMO FISHER SCIENTIFIC MODEL: 7749 REF.: A37904 IONTORRENT ION GENESTUDIO S5 SEQUENCER SEMICONDUCTOR-BASED NEXT-GENERATION SEQUENCING (NGS) SYSTEM CARTRIDGE-BASED REAGENTS SIMPLE TO USE, SCALABLE, AND FLEXIBLE USES ION 5 SERIES CHIPS FOR HIGH THROUGHPUT SCREENING FOR RESEARCH APPLICATIONS POWER: 100-240V 50/60HZ 14.5-6.5A SKU: V05D002 1E-14-05(1) 260LBS - 48IN X 40IN X 40IN

[LOT OF 5] VEECO FIB2-100S AFM PROBES MANUFACTURER: VEECO MODEL: FIB2-100S DESCRIPTION: AFM PROBES FOR USE WITH: AUTOMATED AFM SYSTEMS CONDITION: NEW QUANTITY: 5 (1 PACK) SKU: M38P024 1A-02-02-01(1) 1LBS - 6IN X 6IN X 4IN

[ENVIRONMENTAL STRESS SYSTEMS ESS] T300 6"X24" THERMAL PLATFORM CRYOGENICALLY COOLED THERMAL INDUCING PLATFORM TOP PLATE: 8" X 26" OVERALL 5 ADJUSTABLE HOLD-DOWN ARMS COOLANT: LIQUID CARBON DIOXIDE, 300PSI HEAT: ELECTRIC 120V 17A REQUIRES EXTERNAL CONTROLLER (NOT INCLUDED) (1) ESS T300 6"X24" THERMAL PLATFORM SPECIFICATIONS: MANUFACTURER: ENVIRONMENTAL STRESS SYSTEMS MODEL: T300 6X24 CRYOGENICALLY COOLED THERMAL INDUCING PLATFORM TOP PLATE: 8" X 26" OVERALL 5 ADJUSTABLE HOLD-DOWN ARMS COOLANT: LIQUID CARBON DIOXIDE, 300PSI HEAT: ELECTRIC 120V 17A REQUIRES EXTERNAL CONTROLLER (NOT INCLUDED)

[XELTEK CX5158 SOCKET ADAPTER FOR SUPERPRO 5000 UNIVERSAL DEVICE PROGRAMMER] - MANUFACTURER: XELTEK MODEL: CX5158 SOCKET ADAPTER FOR USE WITH XELTEK SUPERPRO 5000 UNIVERSAL PROGRAMMERS SKU: P33D015 1D-02-03(6) 2LBS - 6IN X 6IN X 4IN

SURPASS INDUSTRY DV-25A0 DIGITAL PRESSURE SENSOR MONITOR DISPLAY (5) - THESE SENSORS ARE IN GOOD CONDITION COSMETICALLY WITH MINOR SCUFFS OR SCRATCHES FROM PREVIOUS USE. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). THESE SENSORS WERE REMOVED FROM A DECOMMISSIONED ENVIRONMENT AND NOT TESTED SEPARATELY. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (5) SURPASS INDUSTRY DV-25A0 SERIES PRESSURE SENSOR MONITOR SPECIFICATIONS: MANUFACTURER: SURPASS MODEL: DV-25A0 POWER SUPPLY: 24VDC +/-10%, CURRENT CONSUMPTION: 80MA INPUT: DC4~20MA OR 1~5V UPPER AND LOWER LIMIT SETTING POINTS (CONFIGURABLE) RELAY CONTACT: AC220V/DC30V, 1A (RESISTIVE LOAD) ANALOG OUTPUT: DC4~20MA, SUPPORTS 0 (-100) TO THE RATED PRESSURE ACCURACY: +/- 0.3% @ AMBIENT TEMP. 23C

[PLATO SP-600T] SOLDER POT 1000W 115VAC 6" X 4" X 4" PORCELAIN CRUCIBLE. USED. COMES IN NON-ORIGINAL PACKAGING. THIS SOLDER POT IS IN GOOD COSMETIC CONDITION WITH SCUFFS, SCRATCHES, AND SOME MINOR DENTS FROM REGULAR COMMERCIAL USE. THE LED DISPLAY LIGHTS UP WITH 000 BUT DOES NOT REGISTER A TEMPERATURE. THE PRESET LEVER IS BROKEN OFF AND DOES NOT FUNCTION. THERE ARE SOME MINOR DENTS TO THE FRONT OF THE HEAT SHIELD. THE HANDLES ON EITHER SIDE OF THE HEAT SHIELD ARE MISSING AND NOT INCLUDED. THE END OF THE HINGE FOR THE TOP SAFETY HEAT SHIELD LID IS BROKEN OFF AND JUST FITS INTO THE HOLE AND DOES NOT EXTEND BEYOND THE HINGE HOLE. THIS CAN CAUSE THE LID TO UNHINGE EASILY WHEN OPERATED. THE EDGE OF THE CRUCIBLE IS DISCOLORED AND ROUGH FROM USE OVER TIME. WE POWERED ON THIS SOLDER POT TO OBSERVE THE POWER INDICATOR LIGHT AND LED DISPLAY IGNITE. THE LCD READOUT IS NON-FUNCTIONAL IN THAT IT ONLY READS 000 AND DOES NOT PROPERLY EXPRESS TEMPERATURE. ADDITIONALLY, THE PRESET SWITCH IS BROKEN OFF AND COMBINED WITH THE BROKEN LED DISPLAY MAKES IT IMPOSSIBLE TO SET PRESET TEMPERATURES. THE MANUAL TEMPERATURE KNOB IS FUNCTIONAL AND ALLOWS A LARGE RANGE OF TEMPERATURES FROM LOW TO HIGH. THIS SOLDER POT CAME TO US FULL OF SOLDER IN THE CRUCIBLE. WE MANUALLY SET THE TEMPERATURE TO HIGH AND ALLOWED THE POT TO HEAT UP. WITHIN 30 MINUTES THE SOLDER HAD MELTED AND BECOME MOLTEN. WE REMOVED MOST OF THE SOLDER FROM THE POT TO REDUCE THE SHIPPING WEIGHT. NO ADDITIONAL TESTING WAS PERFORMED. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) PLATO SP-600T ADJUSTABLE SOLDER POT 1000W 115VAC 6"X4"X4" PORCELAIN CRUCIBLE SPECIFICATIONS: MANUFACTURER: PLATO MODEL: SP-600T DESCRIPTION: SOLDER POT 115VAC 60HZ 1000W 6" X 4" X 4" LARGE CAPACITY PORCELAIN CRUCIBLE 32 LB. SOLDER CAPACITY SAFETY HEAT SHIELD LCD DISPLAY SKU: Y29H018 2F-05-03(1) 52LBS - 20IN X 20IN X 17IN

1996 REES SCIENTIFIC INFORMER 4 #INF-1629 AUTO VOICE DIALER W/POWER ADAPTER - MANUFACTURER: REES SCIENTIFIC RS MODEL: INFORMER 4 CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THIS UNIT IS IN GOOD CONDITION WITH A FEW SCUFFS AND SCRATCHES FROM NORMAL USE, BUT NOTHING MAJOR OR ANYTHING THAT WOULD AFFECT FUNCTION. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS UNIT WAS PULLED FROM A WORKING SYSTEM THAT WAS BEING DECOMMISSIONED, BUT WAS NOT TESTED SEPARATELY AFTER REMOVAL. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) REES SCIENTIFIC INFORMER 4 #INF-1629 AUTO VOICE DIALER SPECIFICATIONS: MANUFACTURER: REES SCIENTIFIC MODEL: INFORMER 4 PART #: INF-1629 DESCRIPTION: COMPUTERIZED VOICE DIALER POWER ADAPTER: INCLUDED MANUFACTURE DATE: JULY 1996 TOTAL WEIGHT: 2.55 LBS. CONDITION: USED QUANTITY: 1 SKU: N21P010 1E-05-02(1) 4LBS - 10IN X 10IN X 7IN

ATEQ F2P REF. 103.00 DIGITAL AIR LEAK DETECTOR CHECKER - PARTS - MANUFACTURER: ATEQ MODEL: F2P CONDITION: FOR PARTS OR NOT WORKING. COMES IN NON-ORIGINAL PACKAGING. THIS TESTER IS IN FAIR COSMETIC CONDITION OVERALL, WITH LOTS OF SCUFFS/SCRATCHES/ADHESIVE LABEL RESIDUE ALL OVER. THE BOTTOM PANEL IS BENT AND THERE IS SOME CORROSION ON THE COVER SCREWS. THIS IS BEING LISTED AS/IS. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: WE ARE NOT ABLE TO FULLY TEST THIS ITEM. IT DOES POWER ON AND MAKE SOME CLICKING NOISES WHEN IT IS WAKING UP. THIS CAME TO US WITH A BUNCH OF OTHER TEST EQUIPMENT THAT IS ALL FAULTY, AND WE ASSUME THIS IS FAULTY AS WELL. THIS IS BEING LISTED AS/IS. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) ATEQ F2P PRESSURE TESTER SPECIFICATIONS: MANUFACTURER: ATEQ MODEL: F2P REF. 103.00 PRESSURE TESTER AS/IS SKU: V51D026 2J-05-04(1) 23LBS - 18IN X 18IN X 12IN

80'FEET COLE-PARMER 06492-03 THERMOPLASTIC ETHYL VINYL ACETATE TUBING 0.030"ID - MANUFACTURER: COLE PARMER MODEL: 06492-03 CONDITION: NEW OTHER. SOME TUBING HAS BEEN REMOVED FROM THE ROLL, WE ESTIMATE LESS THAN 20 FEET BUT CAN'T BE SURE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: APPROXIMATELY 80 FEET-03 TUBING SPECIFICATIONS: MANUFACTURER: COLE-PARMER INSTRUMENT CO. CAT. NO.: 06492-03 THERMOPLASTIC ETHYL VINYL ACETATE TUBING 0.030" ID MICROBORE 0.090" OD BIOLOGICALLY STABLE NONTOXIC NON-CONTAMINATING TEMPERATURE RANGE: -34OC TO +82OC STERILIZABLE BY AUTOCLAVE, ETHYLENE OXIDE, GAMMA RADIATION OR DRY HEAT

[WINWAY TECH 10102007720] TEST SOCKET SIZE: BGA35X35-M26X26-1.27 SKUS: Y11U006 4C-03-03(1) 2LBS - 6IN X 6IN X 4IN. INCLUDED: (1) WINWAY TECH 10102007720 AND 10101008190 TEST SOCKET.

[TEKTRONIX TLA7AA4] LOGIC ANALYZER MODULE 136 CHANNELS CONFIGURATION: CS TIMING: 8 GHZ STATE SPEED: 450 MHZ MEMORY DEPTH: 2M FOR USE WITH TLA700 SERIES - MANUFACTURER: TEKTRONIX MODEL: TLA7AA4 CONDITION: FOR PARTS OR NOT WORKING. COMES IN NON-ORIGINAL PACKAGING. THIS MODULE IS IN FAIR COSMETIC CONDITION WITH MINOR SCUFFS/SCRATCHES, MARKER WRITING AND ADHESIVE LABEL RESIDUES FROM PRIOR USE. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: THIS CAME TO US WITH A LARGE ASSORTMENT OF "BAD" TEST EQUIPMENT. WE ASSUME IT IS FAULTY, BUT HAVE NO WAY TO TEST IT. THIS SALE WILL BE AS-IS. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) TEK TLA7AA4 CS LA MODULE SPECIFICATIONS: MANUFACTURER: TEKTRONIX MODEL: TLA7AA4 LOGIC ANALYZER MODULE 136 CHANNELS CONFIGURATION: CS TIMING: 8 GHZ STATE SPEED: 450 MHZ MEMORY DEPTH: 2M FOR USE WITH TLA700 SERIES SKU: Y09D016 2H-02-05(9) 8LBS - 18IN X 12IN X 7IN

GELMAN LABORATORY 4251 ACRO 50 VENT DEVICE W/ 0.2 M PTFE MEMBRANE (12) - MANUFACTURER: PALL MODEL: 4251 CONDITION: NEW OTHER. THESE VENT DEVICES ARE IN A NEW AND UNUSED COSMETIC CONDITION AND COME IN THE ORIGINAL OPEN GELMAN LABORATORY BOX AND THE INDIVIDUAL DEVICES COME IN THE ORIGINAL SEALED PLASTIC. THE BOX ORIGINALLY CONTAINED 18 UNITS BUT NOW INCLUDES 12. INCLUDED: (12) GELMAN LABORATORY 4251 ACRO 50 VENT DEVICE W/ 0.2 M PTFE MEMBRANE SPECIFICATIONS: MANUFACTURER: PALL (GELMAN LABORATORY) MODEL: 4251 DESCRIPTION: ACRO 50 VENT DEVICE W/ 0.2 M PTFE MEMBRANE (1) BOX OF 12 SKU: Y27H016 1E-10-03(1) 4LBS - 22IN X 12IN X 8IN

[USED] HEWLETT PACKARD 8562E SPECTRUM ANALYZER 30HZ-13.2GHZ LEVEL READING IS OFF -PARTS - MANUFACTURER: HEWLETT PACKARD HP MODEL: 8562E CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THIS ANALYZER IS IN FAIR COSMETIC CONDITION WITH MINOR SCUFFS/SCRATCHES/STAINS FROM PRIOR USE. THE BACK HAS A HELPFUL, FADED, STICKY STICKER PROCLAIMING THIS TO BE A SPECTRUM ANALYZER. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS ANALYZER IS IN MOSTLY WORKING CONDITION, EXCEPT THAT THE MEASURED AMPLITUDE OF SIGNALS IS CONSISTENTLY LOW. WE WERE ABLE TO DISPLAY SIGNALS FROM 30HZ TO 12.7GHZ (THE LIMIT OF OUR GENERATOR) WITHOUT DIFFICULTY. THE CALIBRATION SIGNAL MEASURES JUST A LITTLE LOW, BUT INPUT SIGNALS FROM OUR SOURCES RANGED FROM JUST A LITTLE LOW TO NEARLY 10DB LOW! THE SCREEN IS DIM, BUT WHEN WE TURNED IT UP TO THE MAXIMUM AND ADJUSTED THE FOCUS, IT WAS USABLE UNDER NORMAL AMBIENT LIGHTING. THE CONTROLS RESPONDED TO USER INPUTS AS EXPECTED. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) HP 8562E SPECTRUM ANALYZER SPECIFICATIONS: MANUFACTURER: HEWLETT PACKARD MODEL: 8562E SPECTRUM ANALYZER BANDWIDTH: 30 HZ 13.2 GHZ INSTALLED OPTIONS: 103, 104, 327 MOUNTED IN A 19" RACK MOUNT ADAPTER POWER: 115/230VAC, 300VA MAXIMUM CONTINUOUS 30HZ TO 13.2GHZ SWEEP LOW PHASE NOISE, WIDE DYNAMIC RANGE ADJACENT CHANNEL POWER, CHANNEL POWER, CARRIER POWER, AND GATED VIDEO MEASUREMENTS MIL-T-28800C RUGGED SKU: X34D020 3A-08-03(1) 50LBS - 25IN X 25IN X 13IN

[HEWLETT PACKARD] [E3620A] DUAL OUPTUT 2 CHANNEL DC POWER SUPPLY 0-25V 50W 115V AC INPUT - MANUFACTURER: HEWLETT PACKARD HP MODEL: E3620A STD CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THIS SUPPLY IS IN GOOD COSMETIC CONDITION WITH MINOR BLEMISHES FROM PRIOR USE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS UNIT POWERS ON AND THE DISPLAYS ARE BRIGHT AND CLEAR. WE LOADED EACH OUTPUT AS SHOWN, TO 1A AT 25V AND 1V USING OUR DUMMY RESISTORS. WE LET IT RUN WITH NO PROBLEMS FOR A COUPLE OF MINUTES. WE NOTED THAT ACTUAL OUTPUT VOLTAGE WAS SLIGHTLY OFF FROM WHAT THE CURRENT INDICATION AND OUR SEPARATE METER SHOWED. YOU MIGHT WANT TO SEND IT BACK TO KEYSIGHT FOR CALIBRATION BUT IT'S USABLE AS IT SITS. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) HP E3620A POWER SUPPLY SPECIFICATIONS: MANUFACTURER: HEWLETT PACKARD MODEL: E3620A STD DC REGULATED POWER SUPPLY DUAL OUTPUTS MAXIMUM OUTPUT POWER: 50 W VOLTAGE RANGE: 0 ... 25 V DC CURRENT RANGE: 0 ... 1 A 10-TURN ADJUSTMENT POTENTIOMETERS BINDING POST/BANANA JACK OUTPUTS ON FRONT DIGITAL VOLTAGE/CURRENT DISPLAYS OVERLOAD INDICATOR LIGHT COMPACT FOR BENCHTOP USE INPUT POWER: 115V, 47 ... 63 HZ, 230VA MAXIMUM SKU: Y10D009 1E-14-03(1) 14LBS - 22IN X 15IN X 8IN

[DESIGN DEVELOPMENT 100P] TRANSMISSION TEST SET FOR PARTS. MANUFACTURER: DESIGN DEVELOPMENT MODEL: 100P. THIS TEST SET IS IN FAIR COSMETIC CONDITION WITH BLEMISHES FROM PRIOR USE. THERE ARE SCUFFS/SCRATCHES/PAINT ON THE OUTSIDE, AND THE COVER HAS SOME HEAVY DENTS. THE POWER CORD HAS BEEN CUT. THIS SET DOES POWER ON AND RESPOND TO BUTTON PRESSES. THE TONE EMITTED FROM THE SPEAKER WAS VERY "SCRATCHY" AND EVEN MORE SO WHEN THE VOLUME KNOB WAS ADJUSTED. MANUFACTURER: DESIGN DEVELOPMENT INC. MODEL 100P TRANSMISSION TEST SET OPTION SPL-001. SKU: Q30D038 1B-17-04(1) 15LBS - 18IN X 12IN X 12IN

[HEWLETT PACKARD] [HP] [3478A] DIGITAL MULTIMETER DMM 5-1/2 DIGIT WITH HP-IB CRACKED OVER DISPLAY - MANUFACTURER: HEWLETT PACKARD HP MODEL: 3478A CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THIS METER IS IN FAIR COSMETIC CONDITION. THE SCREEN HAS A BIG CRACK ACROSS IT THAT DOES NOT INTERFERE WITH VIEWING THE DISPLAY. THE UNIT LOOKS AND FEELS DIRTY, AND HAS MANY MINOR SCUFFS/STAINS/SPOTS OF RESIDUES FROM PRIOR USE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS METER IS IN MOSTLY WORKING CONDITION. THE POWER-ON SELF-TEST GIVES A "SELF TEST OK" MESSAGE. THE BUTTONS ON THE CONTROL PANEL WORK, BUT SOME REQUIRE A VERY FIRM PRESS TO OPERATE. ALL THE MEASUREMENTS FROM THE FRONT PANEL INPUTS ON AC AND DC VOLTS, AC AND DC CURRENT, 2-WIRE AND 4-WIRE OHMS WERE CLOSE TO WHAT WE WOULD GET ON OUR REFERENCE METER. THE DISPLAY IS CLEAR AND EASY TO READ. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) HP 3478A MULTIMETER SPECIFICATIONS: MANUFACTURER: HEWLETT-PACKARD MODEL: 3478A DIGITAL MULTIMETER 3-1/2 TO 5-1/2 DIGIT RESOLUTION (USER SELECTABLE OR AUTORANGE) HP-IB/GPIB COMPATIBLE FRONT OR REAR PANEL INPUTS SKU: Y33D016 1E-06-04(1) 10LBS - 18IN X 12IN X 8IN

[USED] MINCO TI350 THERMAL TEMPERATURE METER MONITOR GAUGE WITH PROBE - NO RESERVOIR. THIS TEMPERATURE METER IS IN FAIR COSMETIC CONDITION WITH SCUFFS, SCRATCHES, AND STICKER RESIDUE FROM HEAVY INDUSTRIAL USE. TWO OF THE INNER COVER PLATE SCREWS ARE MISSING. COMES IN NON-ORIGINAL PACKAGING. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS METER WAS REMOVED FROM DECOMMISSIONED EQUIPMENT AND HAS NOT BEEN TESTED. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) MINCO TI350 THERMAL TEMPERATURE METER MONITOR GAUGE WITH PROBE - NO RESERVOIR SPECIFICATIONS: MANUFACTURER: MINCO MODEL: TI350 DESCRIPTION: THERMAL TEMPERATURE METER MONITOR GAUGE WITH PROBE - NO RESERVOIR SKU: W40H009 1A-04-02-01(1) 2LBS - 8IN X 8IN X 4IN

[USED] TECHNE FFG02HSD FLEXIGENE 96-WELL PCR THERMAL CYCLER 230/120V 50/60HZ 2.7/5.2A 620W. CONDITION: USED. THIS PCR CYCLER IS IN GOOD COSMETIC CONDITION WITH SCUFFS AND SCRATCHES FROM NORMAL INDUSTRIAL USE. THE BACK RIGHT HINGE FOR THE TOP HAT IS BROKEN BUT FUNCTIONAL. COMES IN NON-ORIGINAL PACKAGING. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. WE POWERED ON THIS PCR CYCLER AND OBSERVED THE LED DISPLAY ILLUMINATE BRIGHTLY AND RESPOND TO THE CONTROL BUTTONS. WE OPENED AND CLOSED THE TOP HAT AND NOTICED THAT THE BACK RIGHT HINGE WAS CRACKED AND BROKEN BUT DID NOT AFFECT THE FUNCTIONALITY OF OPENING AND CLOSING THE TOP HAT. NO ADDITIONAL TESTING WAS PERFORMED. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) TECHNE FFG02HSD FLEXIGENE 96-WELL PCR THERMAL CYCLER 230/120V 50/60HZ 2.7/5.2A SPECIFICATIONS: MANUFACTURER: TECHNE MODEL: FFG02HSD DESCRIPTION: FLEXIGENE PCR THERMAL CYCLER 96-WELL 230/120V 50/60HZ 2.7/5.2A 620W SKU: W40H014 1D-12-03(1) 29LBS - 22IN X 15IN X 15IN

OPTOMISTIC PRODUCTS MODEL R LIGHTPROBE ELECTRONIC LIGHT PROBES - MANUFACTURER: OPTOMISTIC PRODUCTS MODEL: MODEL R CONDITION: USED. COMES IN NON-ORIGINAL ESD SEALED PACKAGING. THESE LIGHT PROBES ARE IN GOOD CONDITION WITH A FEW MINOR SCUFFS AND SCRATCHES FROM NORMAL USE, BUT NOTHING MAJOR OR ANYTHING THAT WOULD AFFECT FUNCTION. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THESE LIGHT PROBES WERE PULLED FROM A WORKING SETUP THAT WAS BEING DECOMMISSIONED, BUT WERE NOT TESTED SEPARATELY AFTER REMOVAL. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (8) OPTOMISTIC PRODUCTS MODEL R LIGHTPROBE ELECTRONIC LIGHT PROBES SPECIFICATIONS: MANUFACTURER: OPTOMISTIC PRODUCTS MODEL: MODEL R DESCRIPTION: LIGHT PROBES TOTAL WEIGHT: 0.45 LBS. SKU: Q04P008 1A-03-05-01(1) 0LBS - 8IN X 8IN X 4IN

STAINLESS STEEL CLEANROOM COMPUTER CART W/ SLIDING SHELVES & STAND - MANUFACTURER: MONTGOMERY WELDING MODEL: CUSTOM CONDITION: USED. SKU: CLY04A001 5D-21-01(1) 999LBS - 999IN X 999IN X 999IN

[WINWAY TECH LALB5700010] TEST SOCKET. MANUFACTURER: WINWAY TECH MODEL: LALB5700010 CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THIS TEST SOCKET HAS MINOR MARKINGS FROM NORMAL USE AND SHOWS NO MAJOR DEFECTS THAT WOULD AFFECT FUNCTIONALITY. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: THIS TEST SOCKET WAS PART OF AN ACTIVE WORKING SYSTEM THAT HAS BEEN DECOMMISSIONED AND WAS NOT TESTED SUBSEQUENT TO ITS REMOVAL. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) WINWAY TECH LALB5700010 AND SAPB10000600 TEST SOCKET SPECIFICATIONS: MANUFACTURER: WINWAY BTECH MODEL: MAINFRAME: LALB5700010 SOCKET: SAPB1000600 DESCRIPTION: TEST SOCKET SKU: Y10U013 2C-03-02(2) 2LBS - 6IN X 6IN X 4IN

[TEKTRONIX P6062B P6063B] PASSIVE OSCILLOSCOPE VOLTAGE PROBES 10X ATTEN (9) - MANUFACTURER: TEKTRONIX MODEL: P6062B CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THESE PARTS ARE ALMOST ALL OUT OF PACKAGE. THE CONDITION OF THE PROBES AND TIPS VARY FROM "USED AND SCUFFED UP" TO "COULD BE UNUSED, WE'RE NOT SURE". AT LEAST ONE CABLE HAS SOME DAMAGE, AND AT LEAST ONE TIP HAS REMNANTS OF RUBBER BAND STUCK ON. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: WE GAVE ALL THE PROBES A QUICK CHECK TO BE SURE THEY PASSED A SIGNAL. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (6) TEK P6062B PROBES (2) TEK P6063B PROBES (1) TEK P6053B PROBE SPECIFICATIONS: MANUFACTURER: TEKTRONIX MODELS: P6062B, P6063B AND P6053B P6062B AND B6063B HAVE SWITCHABLE 1X OR 10X ATTENUATION ALL HAVE GROUND REFERENCE BUTTONS ALL HAVE 10X REF PINS ON THEIR BNC CONNECTORS SKU: X09D012 1B-09-02(1) 4LBS - 12IN X 12IN X 6IN

BECKMAN 915B TOTAL ORGANIC CARBON ANALYZER TOC CATALOG NUMBER 618950 120V - MANUFACTURER: BECKMAN MODEL: 915B CONDITION: FOR PARTS OR NOT WORKING. THIS ANALYZER IS IN FAIR-TO-GOOD COSMETIC CONDITION WITH LOTS OF MINOR BLEMISHES FROM PRIOR USE, MOSTLY STAINS. THE DOORS DON'T STAY SHUT. THIS UNIT IS MISSING "SOMETHING" (WE ARE NOT SURE WHAT) FROM THE RIGHT SIDE AND THE OUTPUT PRINTER FROM THE LEFT SIDE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THE ANALYZER POWERS ON AND THE FAN TURNS. THE GAUGE MOVES WHEN THE SWITCHES ARE PRESSED. WE ARE NOT ABLE TO TEST ANY FURTHER. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) BECKMAN 915B TOC ANALYZER SPECIFICATIONS: MANUFACTURER: BECKMAN MODEL: 915B CAT. NO.: 618950 TOTAL ORGANIC CARBON (TOC) ANALYZER POWER: 120V 12A SKU: N130084 1E-10-06(1) 200LBS - 48IN X 40IN X 38IN

[HEWLETT PACKARD HP/AGILENT 10707A BEAM BENDER PRISM MIRROR BLOCK W/ PIVOT MOUNT] MANUFACTURER: HEWLETT PACKARD HP MODEL: 10707A BEAM BENDER INTERFEROMETER DESIGNED FOR BEAM DIAMETERS OF 6MM OR LESS BENDS INCOMING BEAM 90O 1" CUBE METAL HOUSING HOUSING HAS THREADED HOLES FOR MOUNTING

50L JACKETED GLASS CHEMICAL REACTOR WITH STIR MOTOR, STAINLESS STAND - MANUFACTURER: ACE GLASS MODEL: 6472-60 CONDITION: USED. THIS REACTOR IS IN GOOD COSMETIC CONDITION, WITH ONLY MINOR BLEMISHES (SCUFFS, GREASE RESIDUES BY SEALS) FROM PRIOR USE. THE GLASS LOOKS PRETTY CLEAN. THE STIRRER SHAFT IS BROKEN, WITH THE BREAK BELOW THE AREA THAT RIDES IN THE PTFE BEARING. THIS SHOULD BE REPAIRABLE, IF YOU WANT TO REUSE THIS ROD (OR YOU COULD PURCHASE A NEW ONE, OR USE A DIFFERENT ROD, OR NONE). THE TIRES ON THE WHEELS ARE FALLING APART, LEAVING LITTLE BITS OF ORANGE PLASTIC BEHIND AS THEY ROLL. BY THE TIME YOU GET THE SUPPORT STRUCTURE INTO YOUR FACILITY, THEY WILL LIKELY ALL BE PLAIN GRAY PLASTIC WHEELS, MINUS THEIR ORANGE TIRES! THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS REACTOR IS IN GOOD WORKING CONDITION. WE ACQUIRED IT FROM A CLOSED LAB AND GAVE A QUICK CHECK TO VERIFY THE STIRRER TURNS AT VARIABLE SPEEDS AS SET BY THE CONTROLLER. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) ACE 6472-050 JACKETED FLASK (1) 6530-45 DOMED HEAD (1) 6472-332 SUPPORT ASSEMBLY (1) 13557-440 1/2HP STIRRER W/GEARHEAD AND ELECTRONIC SPEED CONTROL (1) THERMOCOUPLE (1) SPARE 28MM PTFE BUSHING (2) PTFE STIRRER PADDLES (1) BROKEN 8080-18 52" X 28MM GROUND GLASS SHAFT VARIOUS NECK SIZE ADAPTERS, CAPS AND PLUGS AS SHOWN SPECIFICATIONS: MANUFACTURER: ACE GLASS INCORPORATED ORDER CODE: 6472-160 6472-SERIES CYLINDRICAL PILOT PLANT REACTOR WITH DOMED HEAD 50 LITER GLASS REACTOR VESSEL JACKETED VESSEL, 5PSI MAXIMUM JACKET PRESSURE, WITH HOSE NIPPLES STAINLESS STEEL SUPPORT STAND IS ADJUSTABLE ADJUSTABLE-HEIGHT FLASK SUPPORT SPEED-ADJUSTABLE STIRRING MOTOR 30 CM FLASK OPENING WITH FLAT-GROUND PLANE FLANGE BOTTOM OUTLET WITH DRAIN VALVE TRADITIONAL DOMED HEAD WITH FITTINGS: 1X 45/50 CENTER NECK 4X 45/50 OPENINGS 2X 29/42 OPENING 1X 100MM ID (LARGE!) SIDE PORT WITH STIRRING MOTOR AND PADDLES FOR A 28MM DIAMETER, 52" LONG GLASS STIRRING SHAFT (BROKEN SHAFT INCLUDED) COMPATIBLE WITH GLASS OR STAINLESS STEEL REINFORCED PTFE STIRRING RODS CAN BE FITTED WITH HEATING MANTLE (NOT INCLUDED) LOCKING CASTERS FOR EASY RELOCATION SKU: Y13D001 5A-22-01(1) 340LBS - 48IN X 40IN X 92IN

NETCOM SYSTEMS LAN-3200A 6 PORT 10/100BASE-T ETHERNET SMARTMETRICS MODULE CARD - MANUFACTURER: NETCOM SYSTEMS MODEL: LAN-3200A CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THIS CARD IS IN GOOD COSMETIC CONDITION WITH ONLY MINOR BLEMISHES FROM PRIOR USE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS WAS REMOVED FROM A DECOMMISSIONED SMARTBITS SYSTEM AND NOT TESTED SEPARATELY. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) NETCOM LAN-3200A CARD SPECIFICATIONS: MANUFACTURER: NETCOM SYSTEMS MODEL: LAN-3200A SMARTMETRICS 10/100BASE-T ETHERNET MODULE 6 PORTS SKU: P23D016 1E-05-03(1) 4LBS - 17IN X 12IN X 4IN

[VWR] [10153-834] FIXED SPEED VORTEX MIXER 120V 135W 1.2A 1 PHASE 50/60HZ

[NIKON] [MDC] C-MOUNT MICROSCOPE CAMERA LENS/ADAPTER 28X25MM. USED. COMES IN NON-ORIGINAL PACKAGING. THIS LENS IS IN GOOD OVERALL COSMETIC CONDITION WITH JUST A FEW BLEMISHES WORTH NOTING. THERE ARE SOME MINOR SCRATCH MARKS ON THE OUTSIDE OF THE UNIT AND A COUPLE OF SMALL SCUFFS ON THE RIM OF THE THREADING. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. WE ARE NOT ABLE TO TEST THIS LENS, ASIDE FROM LOOKING THROUGH WITH THE EYE (IT LOOKS CLEAR). NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) NIKON COOLPIX MDC C-MOUNT MICROSCOPE CAMERA LENS/ADAPTER 28X25MM. MANUFACTURER: NIKON. MODEL: MDC. DESCRIPTION: CAMERA LENS/ ADAPTER 28 X 25MM RELAY LENS FOR PHOTOMICROGRAPHY DESIGNED FOR USE WITH COOLPIX 5000 CAMERAS THREAD ADAPTERS REQUIRED FOR USE ARE NOT INCLUDED! SKU: Y09S009 1A-01-02-02(1). 2LBS - 6IN X 6IN X 4IN

2013 CAMBRIDGE ACCUSENSE ATM 2400 AIR VELOCITY SENSOR (FS58506-R01) CAPACITANCE METER. MANUFACTURER: CAMBRIDGE. MODEL: FS58506-R01. CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THIS SENSOR IS IN GREAT CONDITION WITH A PROTECTIVE SLEEVE OVER THE SENSOR HEAD. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS SENSOR WAS PULLED FROM A WORKING SETUP THAT WAS BEING DECOMMISSIONED, BUT WAS NOT TESTED SEPARATELY AFTER REMOVAL. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) CAMBRIDGE ACCUSENSE ATM 2400 AIR VELOCITY SENSOR. SPECIFICATIONS: MANUFACTURER: CAMBRIDGE. MODEL: ACCUSENSE ATM 2400. PART #: FS58506-R01. DESCRIPTION: AIR VELOCITY SENSOR. CALIBRATION DATE: MAY 2013. WEIGHT: 0.15 LBS. CONDITION: USED. QUANTITY: 1. SKU: O51P001 1A-01-03-02(1) 2LBS - 12IN X 12IN X 5IN

TEKTRONIX ST112 SONET TRANSMISSION TEST SET TRANSMISSION ANALYZER BAD OC12 PARTS - MANUFACTURER: TEKTRONIX MODEL: ST112 CONDITION: FOR PARTS OR NOT WORKING. COMES IN NON-ORIGINAL PACKAGING. THIS SET IS IN GOOD COSMETIC CONDITION WITH MINOR BLEMISHES FROM PRIOR USE, INCLUDING SCUFFS/SCRATCHES AND RESIDUE FROM OLD ADHESIVE LABELS. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS UNIT IS IN PARTIAL WORKING CONDITION. WE ARE NOT EQUIPPED TO FULLY TEST IT. WE CONNECTED THE INPUTS TO THE OUTPUTS AND SET THE TRANSMITTER AND RECEIVER TO OC1. WHEN THE FIBER WAS REMOVED, A BUNCH OF ERROR LIGHTS CAME ON THE RIGHT SIDE OF THE MACHINE AND IT SOUNDED AN ALARM. REINSERTING THE FIBER MADE THE ERROR LIGHTS EXTINGUISH AND THE TONE SILENCED. THIS WAS REPEATED WITH SIMILAR RESULTS FOR OC3 BUT WHEN WE TRIED IT ON OC12, IT GAVE ERROR LIGHTS EVEN WITH THE FIBER STILL INSERTED. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) TEKTRONIX ST112 SONET TEST SET SPECIFICATIONS: MANUFACTURER: TEKTRONIX MODEL: ST112 SONET TRANSMISSION TEST SET SKU: O04D002 1E-12-04(1) 27LBS - 22IN X 22IN X 10IN

[MEISEI M-10 HOTWEEZERS THERMAL WIRE STRIPPER POWER SUPPLY] 115VAC 50/60HZ 33W. MANUFACTURER: MEISEI MODEL: M-10. THIS HOTWEEZER POWER SUPPLY IS IN GOOD CONDITION COSMETICALLY WITH MINOR SCUFFS AND SOME WRITING BUT NOTHING THAT WOULD INTERFERE WITH NORMAL OPERATION. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. THIS POWER SUPPLY WAS CONNECTED TO A POWER SOURCE AND POWERED ON NORMALLY. WE DID NOT HAVE THE HOTWEEZERS HAND UNIT FOR ANY FURTHER TESTING. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) MEISEI M-10 HOTWEEZER POWER SUPPLY. SPECIFICATIONS: MANUFACTURER: MEISEI MODEL: M-10 ADJUSTABLE TIP TEMPERATURE: 300O F TO 1450O F 33 WATTS. THE FILAMENT IS RESISTANT TO OXIDATION. INPUT: 115VAC, 60HZ. 6LBS - 12IN X 12IN X 10IN

[JEOL PART FOR JSM-6400F ELECTRON SCANNING MICROSCOPE] PART FOR JSM-6400F ELECTRON SCANNING MICROSCOPE. MINOR SCUFFS AND SCRATCHES FROM NORMAL USE AND SHOWS NO MAJOR DEFECTS THAT WOULD AFFECT FUNCTIONALITY. THIS PART WAS NOT TESTED. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. MANUFACTURER: JEOL MODEL: UNKNOWN DESCRIPTION: PART FOR JSM-6400F ELECTRON SCANNING MICROSCOPE SPECIFICATIONS: MANUFACTURER: JEOL MODEL: UNKNOWN DESCRIPTION: PART FOR JSM-6400F ELECTRON SCANNING MICROSCOPE SKU: R13U026 1D-11-02(1) 2LBS - 8IN X 8IN X 4IN

[0.5 - 10UL] JINGKE TOPPETTE PIPETTE. MANUFACTURER: JINGKE. MODEL: TOPPETTE PIPETTE. RANGE: 0.5 - 10UL. HAND HELD ERGONOMIC DESIGN. SKU: R32E011 1E-09-01(1). 2LBS - 14IN X 6IN X 6IN

[DARWIN CHAMBERS PH09-DA] 9 CU.FT. STABILITY TEMP/HUMIDITY ENVIRONMENTAL CHAMBER. MANUFACTURER: DARWIN CHAMBERS MODEL: PH09-DA. THIS CHAMBER IS IN GOOD COSMETIC CONDITION, WITH ONLY MINOR RESIDUES FROM PRIOR USE, AS WELL AS SOME SCRATCHES ON THE DOOR. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). THIS CHAMBER IS IN GOOD WORKING CONDITION. WE WERE ABLE TO VERIFY TEMPERATURE CONTROL FROM 20O TO 50O (THE LIMITS OF THE SET POINT RANGE). COOLING AND HEATING RATES WERE SLOW, AND THE TEMPERATURE CONTROLLER ALARMED A COUPLE OF TIMES ON THE WAY FROM 20 TO 50, BUT WE THINK THIS IS 'NORMAL' FOR SMALL PELTIER HEATERS IN SUCH A LARGE SPACE. WE WERE ABLE TO VERIFY OPERATION FROM 90% TO 35% HUMIDITY (OUR AIR SUPPLY IS NOT VERY DRY). THE FANS ALL WORK. THE CONTROLS RESPOND AS EXPECTED TO USER INPUTS, AND THE DISPLAYS ARE BRIGHT AND EASY TO READ. THE ALARM-SILENCE BUTTON WORKS. THE CASTERS ROLL EASILY, BUT NOT AS SMOOTHLY AS WE WOULD LIKE. NOTE THAT DURING A COUPLE OF HOURS AT MAXIMUM TEMPERATURE/HUMIDITY, A SMALL PUDDLE CAME FROM THE BOTTOM OF THE DOOR - THE ENTIRE DOOR SEAL WAS WET ON BOTTOM, AND THERE WAS CONDENSATE IN THE REAR DRAIN LINE AS WELL. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) DARWIN CHAMBERS PH09-DA STABILITY CHAMBER SPECIFICATIONS: MANUFACTURER: DARWIN CHAMBERS MODEL: PH09-DA PH-SERIES STABILITY CHAMBER CAPACITY RATING: 9 CUBIC FEET (INTERNAL DIMENSIONS 29.75"W X 22.5"D X 29.75"H) BENCHTOP CHAMBER, FOR 24" BENCHTOPS NO REFRIGERANT, PELTIER THERMOELECTRIC COOLING ULTRASONIC HUMIDIFICATION, DRY AIR DEHUMIDIFICATION QUIET OPERATION (ONLY FAN NOISE, NO COMPRESSOR) MULTIPLE, INDEPENDENT THERMOELECTRIC COOLING ELEMENTS NON-PROPRIETARY PXF4 CONTROLLERS FEATURE FUZZY LOGIC & PID CONTROL, ETC. TEMPERATURE RANGE: 20 ... 50 OC HUMIDITY RANGE: AMBIENT ABSOLUTE HUMIDITY TO 90 % RELATIVE HUMIDITY @ 42 OC DEWPOINT STAINLESS STEEL INTERIOR 180O DOOR SWING ADJUSTABLE WIRE RACK SHELVING (2 SHELVES ARE INCLUDED) MAGNETIC DOOR GASKET DOOR LATCH PULLS WITH SPRING PRESSURE LOCKING CASTERS FOR EASY RELOCATION POWER REQUIREMENT: 120V 4.2A 60HZ SKU: Y25D002

AGILENT 6032A SYSTEM DC POWER SUPPLY 1000W 0-60V 0-50A 120VIN EE BAD - PARTS - MANUFACTURER: AGILENT MODEL: 6032A CONDITION: FOR PARTS OR NOT WORKING. COMES IN NON-ORIGINAL PACKAGING. THIS SUPPLY IS IN FAIR COSMETIC CONDITION WITH MINOR BLEMISHES FROM PRIOR USE, INCLUDING LIGHT AS WELL AS HEAVY SCUFFS/STAINS/SCRATCHES. THE POWER INPUT FILTER AND COVER ARE BOTH MISSING, WITH WIRES COMING OUT THE BACK OF THE DEVICE. ONE OF THE LITTLE BITS OF PLASTIC ON THE BARRIER STRIP NEAR THE OUTPUT TERMINALS IS BROKEN. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS UNIT IS NOT WORKING PROPERLY. THE DISPLAY GIVES AN EE BAD ERROR AT POWER-ON. THERE IS A SCALING PROBLEM, WHERE EACH DISPLAY SHOWS ABOUT 1000 AT FULL RANGE. AT NO OUTPUT, BOTH DISPLAYS SHOW 1.5. AT 100 V AND 100A INDICATED OUTPUT, IT IS GIVING ONLY 6VDC AND 5A OUTPUT. AT 1000 VOLTS INDICATED, THE OUTPUT IS ABOUT 62.3VDC. AT 982A INDICATED, THE ACTUAL OUTPUT IS 50 AMPS. THE DISPLAYS ARE BRIGHT. THE ADJUSTMENT KNOB WORKS. THE FAN WORKS. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) AGILENT 6032A POWER SUPPLY SPECIFICATIONS: MANUFACTURER: AGILENT MODEL: 6032A SYSTEM POWER SUPPLY HP-IB COMMUNICATIONS/PROGRAMMING OUTPUT: 0 TO 60V DC, 0 TO 50 AMPS, 1064 WATTS MAX. INPUT: 120V 48-63HZ 24A MAX. NOT WORKING PROPERLY! SOLD AS-IS! SKU: Y33D024 1E-09-03(1) 39LBS - 22IN X 22IN X 10IN

2005 MELLES GRIOT 65A106030B0S021 SFS LASER CLASS 3B - MANUFACTURER: MELLES GRIOT MODEL: 65A106030B0S021 CONDITION: REFURBISHED BY MANUFACTURER. COMES IN NON-ORIGINAL PACKAGING. THIS UNIT WAS SHIPPED OFF TO BE REPAIRED (WE DON'T KNOW THE DETAILS) AND UPON RETURN WAS PUT BACK INTO STOCK AND KEPT AS A SPARE. THIS LASER IS IN GREAT CONDITION WITH A FEW MINOR SCUFFS AND SCRATCHES, BUT NOTHING MAJOR OR ANYTHING THAT WOULD AFFECT FUNCTION. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) MELLES GRIOT 65A106030B0S021 SFS LASER SPECIFICATIONS: MANUFACTURER: MELLES GRIOT MODEL: 65A106030B0S021 DESCRIPTION: SFS LASER LASER CLASS: CLASS 3B MANUFACTURE DATE: SEPTEMBER 2005 TOTAL WEIGHT: 10.65 LBS. CONDITION: REFURBISHED QUANTITY: 1 SKU: M31P026 1D-20-04(1) 13LBS - 24IN X 12IN X 10IN

[TOSOH BIOSCIENCE 805103] TSKGEL G3000SW COLUMN 60CM X 7.5CM 725 MAX PSI HPLC - MANUFACTURER: TOSOH BIOSCIENCE MODEL: 805103 CONDITION: USED. THIS COLUMN IS IN GOOD COSMETIC CONDITION WITH ONLY MINOR SCUFFS FROM REGULAR COMMERCIAL USE AND COMES IN THE ORIGINAL OPEN TOSOH BIOSCIENCE BOX WITH HANDWRITING ON THE OUTSIDE. SOMEONE HAS WRITTEN THE MAX PSI ON THE COLUMN WITH PERMANENT INK. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS COLUMN WAS REMOVED FROM DECOMMISSIONED EQUIPMENT AND HAS NOT BEEN TESTED. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) TOSOH BIOSCIENCE 805103 TSKGEL G3000SW COLUMN 60CM X 7.5CM 725 MAX PSI SPECIFICATIONS: MANUFACTURER: TOSOH BIOSCIENCE MODEL: 805103 DESCRIPTION: TSKGEL G3000SW COLUMN 60CM X 7.5CM 725 MAX PSI MAX FLOWRATE: 1.2 ML/MIN STANDARD FLOW: 0.5-1.0 ML/MIN PH RANGE: 2.5 - 7.5 SALT CONC.: </= 0.5M ORGANIC CONC.: 0-100% FOR ANY SOLUBLE SOLVENTS - MAKE GRADUAL CHANGE COLUMN NO. B00073 SKU: Y27H014 1E-08-04(1) 4LBS - 36IN X 6IN X 6IN

[AGILENT E6178B] 8-CHANNEL HEAVY DUTY LOAD CARD VXI BUS FROM TS-5400 FTS. MANUFACTURER: AGILENT TECHNOLOGIES. MODEL: E6178B. CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THIS CARD IS IN FAIR COSMETIC CONDITION, WITH MINOR SCUFFS/STAINS FROM PRIOR USE, A MISSING ALUMINUM TAG IN A PULL TAB, SOME HANDWRITING AND A LITTLE LABEL ON THE FRONT. THE BACK HAS SOME DUST FROM STORAGE. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: THIS WAS REMOVED FROM A DECOMMISSIONED SYSTEM AND NOT TESTED SEPARATELY. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) AGILENT E6178B LOAD CARD. SPECIFICATIONS: HEAVY DUTY LOAD CARD, 8 CHANNELS, FOR VXI BUS, 2 SLOTS WIDE, MAXIMUM CURRENT PER CHANNEL: 30 A, INDIVIDUALLY FUSED CHANNELS, CURRENT TRANSDUCER FOR CURRENT MEASURING. ORIGINALLY INSTALLED IN TS-5400 FUNCTIONAL TEST SYSTEM. MIXED WITH HP AND AGILENT MARKINGS: E3750-66506, E6178-81000. SKU: Y38D002. 1E-15-03(4) 5LBS - 18IN X 12IN X 6IN

[VITREK V61] AC/DC SAFETY ANALYZER HIPOT TESTER ALWAYS ERRORS VOLTAGE TESTS -PARTS. MANUFACTURER: VITREK MODEL: V61 CONDITION: FOR PARTS OR NOT WORKING. COMES IN NON-ORIGINAL PACKAGING. THIS TESTER IS IN FAIR COSMETIC CONDITION, WITH SCUFFS/SCRATCHES/RESIDUES FROM PRIOR USE. THE BACK/LEFT/TOP CORNER IS BENT A LITTLE BY THE PLASTIC FOOT. THE TOP LABEL IS TORN. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS UNIT IS NOT WORKING PROPERLY! THE CALIBRATION LAB SAYS IT GIVES AN ERROR ON ALL TESTS, AND WILL NOT COMPLETE A VOLTAGE TEST. IT POWERS ON AND RESPONDS TO BUTTON PRESSES. THE BACKLIGHT AND DISPLAY BOTH WORK. WE ARE NOT SURE WHAT MAY BE WRONG WITH THIS UNIT. THIS IS BEING SOLD AS/IS. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) VITREK V61 AC/DC SAFETY TESTER SPECIFICATIONS: MANUFACTURER: VITREK MODEL: V61 AC/DC SAFETY ANALYZER FULLY AUTOMATED HIPOT TESTING 100 TO 5000 V AC, MAX. 20 MA 100 TO 6000 V DC, MAX. 7.5 MA RS-232 OR PLC CONTROL SOLD AS-IS! NOT FULLY WORKING! SKU: Y40D013 3A-10-02(1) 36LBS - 24IN X 18IN X 11IN