Leading Rubber Plastics Machinery Dealer Closing its Warehouse PEBSCO LLC
Category: MISC
Total Lots:
232
Total Sales:
🔒 Subscribe
Lot Price Distribution
| Year | Make | Model | Lot Description | Hammer Price | |
|---|---|---|---|---|---|
|
1994 | HERCULES | 54" X 156" |
1994 HERCULES 54" X 156" DRY HEAT AUTOCLAVE WITH MAXIMUM ID LEFT TO RIGHT 59", NATIONAL BOARD CODED, 125 PSI, MAX TEMPERATURE 650 F, 240 VOLT, HINGED QUICK OPENING HYDRAULIC DOOR, (10) VACUUM EXIT PORTS, ELECTRIC HEAT UNIT WITH ATTACHED CONTROL PANEL & TEMPERATURE RECORDERS, REAR MOUNTED 7.5 HP MOTORIZED CIRCULATING FAN 230/460 VOLT (810)
|
🔒 Subscribe |
|
|
2000 | FARREL | 84 |
2000 FARREL 84 TWO-ROLL RUBBER MILL WITH (2) CORED CHILLED IRON 26 X 26 X 84 ROLLS WITH ROTARY UNIONS, SPLIT INBOARD SEALS, RATCHET ROLL ADJUSTMENTS, SPLIT & PNEUMATIC FLIP STOCK GUIDES, ALL GUARDS, MILL PAN, TRABON LUBRICATOR, MOUNTED OPERATOR'S POD, AIRBRAKE SAFETY, LUFKIN 366 HP CATALOG @ 28.72, REBUILT WESTINGHOUSE - EASTERN ELECTRIC AC 200 HP 460 VOLT MOTOR, ALL MOUNTED ON 26 FABRICATED 2 PIECE STEEL BASES WITH BARRY MOUNTS, STAND ALONE CONTROL PANEL
|
🔒 Subscribe |
|
|
2002 | WAYNE | 3 |
2002 WAYNE 3 SILICONE EXTRUDER WITH 3" X 42" SCREW, 14:1 L/D COLD FEED EXTRUDER, POWER ROLL FEED WITH CONVEYOR ROLLERS, SPAGHETTI STRAINING DIE HEAD ASSEMBLY, MULTI-ZONE HEATING/COOLING, 0 - 100 RPM SCREW SPEED, OPERATOR'S CONTROL POD, ALL DIGITAL CONTROLS, WEG CFW09 FREQUENCY DRIVE, 40 HP, VARIABLE SPEED RELIANCE MOTOR WITH SPEED CONTROL, ATTACHED & MOUNTED CONTROLLER, UNITIZED ON COMMON BASE, 48" X 72", APPROX. 6,200 LBS.
|
🔒 Subscribe |
|
|
DAKE | 33-459 |
DAKE 33-459 200-TON HYDRAULIC PRESS, S/N 167904, WITH (2) 36 X 36 ELECTRIC HEAT PLATENS 240/1, 15,750 WATTS EA., 40 AMPS EA., 600 F MAX, NEW INSTALLED STRIP HEATERS IN 2021, NEW DIGITAL TEMPERATURE CONTROLLERS INSTALLED 2021, 12 RAM X 24 STROKE, 22 WORKING DAYLIGHT, 10 HP, 240 VOLT, 4,000 PSI HYDRAULIC SYSTEM, 50-GALLON RESERVOIR, DRAWINGS, PREVIOUS USAGE: MEDICAL GRADE SILICONE 20-80 DURO, SBR 70-97 DURO, NEOPRENE 40 DURO, 10,000 LBS.
|
🔒 Subscribe | |
|
|
NRM | PM III VTD 3.5 |
NRM PM III VTD 3.5 COLD FEED RUBBER/SILICONE EXTRUDER, S/N T59235, WITH 2-PIECE JACKETED BARREL, QUICK CLAMP HEAD ASSEMBLY, 17:1 L/D, POWER ROLL FEED, RELIANCE 75 HP, 1,750 RPM, 500 VDC MOTOR - DRIVE OUTSIDE (878)
|
🔒 Subscribe | |
|
|
1997 | BAKER PERKINS | 50-GALLON SIGMA TILT MIXER |
1997 BAKER PERKINS 50-GALLON SIGMA TILT MIXER, REBUILT, WITH STAINLESS STEEL JACKETED BOWL & S/S Z-BLADES, FREE STANDING OPERATOR STATION, TILT HYDRAULIC SYSTEM (MISSING TILT CYLINDER, WAS REMOVED), VS AC 50 HP MOTOR & CONTROL 230/440 VOLT, DELTA T TEMP CONTROLLER, LAST USE POLYMER MIXING, 10,000 LBS.
|
🔒 Subscribe |
|
|
DEPENDABLE RUBBER MACHINERY | 30" THREE-ROLL CALENDER |
DEPENDABLE RUBBER MACHINERY 30" THREE-ROLL CALENDER, S/N 4632-77, WITH (3) 12 X 30 CORED CHILLED IRON ROLLS WITH ROTARY UNIONS, STOCK GUIDES, MOUNTED RUBBER COVER PRESSURE ROLL, MOUNTED ABOVE HEAD OPERATOR'S LIGHT, ATTACHED RPM & AMP GAUGES WITH OPERATORS POD, (3) SPLIT HEARING BONE CONNECTING GEARS, TOP & BOTTOM ROLL ADJUSTMENT, TRABON LUBE SYSTEM 57 CENTERLINE WORK HEIGHT #2 ROLL, JONES 86.9:1 RATION DIRECT DRIVE REDUCER, GENERAL DYNAMICS 30 HP, 230 VOLT DC MOTOR, ALL MOUNTED ON STEEL FABRICATED BASE, 84 X 14 (829)
|
🔒 Subscribe | |
|
|
UNITED RUBBER MACHINERY EXCHANGE | 48'' TWO-ROLL MILL |
UNITED RUBBER MACHINERY EXCHANGE 48'' TWO-ROLL MILL WITH TOP CAP MILL DESIGN, (2) 18 X 48 CORED CHROMED ROLLS WITH ROTARY UNIONS, APPROX FRONT ROLL SPEED 0-15 RPM, DELRON SPLIT STOCK GUIDES WITH PNEUMATIC FLIP, MILL PAN, MICROSET RATCHET ROLL ADJUSTMENT, HINGED KNIFE HOLDER, MOUNTED LUBRICATOR SYSTEM, FRONT & REAR KICK SAFETIES OVERHEAD SAFETIES E STOP, ATTACHED OPERATOR POD, COUPLING & GEAR GUARDS WITH INSPECTION COVER, FALK ROLLER BEARING TRIPLE REDUCTION GEAR REDUCER, RELIANCE 100 HP DC500 VOLT MOTOR & FREE STANDING CONTROL CABINET, ALL MOUNTED ON STEEL FABRICATED BEAM BASE WITH BARRY MOUNTS, MILL 19 L X 7 W X 66 H, APPROX. 20,000 LBS., ELECTRICAL PANEL 3 L X 3 W X 8 H, 500 LBS., A-FRAME 4 L X 3 W X 5 H, 100 LBS.
|
🔒 Subscribe | |
|
|
2000 | FRENCH OIL | 452-TON |
2000 FRENCH OIL 452-TON HYDRAULIC PRESSES WITH 32.5" X 25.5" BED AREA OPENING, HEAVY DUTY SLAB SIDE CONSTRUCTION 5.5 THICK PLATES, 5.5 THICK GUIDED BOLSTER, PRESSES RAN ON HYDRAULIC OIL SYSTEM 2,000 PSI HIGH PRESSURE, 24 DIAMETER RAM X 20 STROKE, APPROX. 32" TOTAL DAYLIGHT OPENING, NO PLATENS INSTALLED, (8) PUSH BACK ASSIST CYLINDERS, (2) PER PRESS, HYDRAULIC COMPONENTS MOUNTED ON SIDE OF PRESSES PER PHOTOS, 48 WORK HEIGHT APPROX., 103 HIGH WITH CYLINDERS REMOVED X 48 LR X 40 FB, APPROX. 14,500 LBS. EACH, PRESSES HAVE SOME MISSING COMPONENTS IN PANELS
|
🔒 Subscribe |
|
|
HOLMES | TWIN 500-TON HYDRAULIC PRESSES |
HOLMES TWIN 500-TON HYDRAULIC PRESSES WITH (4) 32 X 32 ELECTRIC HEAT PLATENS, 440 VOLT PER PRESS, 33" BETWEEN POSTS LEFT TO RIGHT, TOTAL DAYLIGHT OPENING: 38", 60" WORK HEIGHT, ONE PRESS WITH PUSHBACKS NON NUMBERED PRESS, ONE #6 PRESS WITHOUT PUSHBACKS INSTALLED, FULLY GUIDED MAIN BOLSTER, FULLY GUIDED CENTER BOLSTER, 5 RODS, 38 STROKE, 24 DIAMETER RAM, PRESS RATING 500-TON @ 2,250 PSI, CONTROL PANEL PER PRESS, RAN ON OIL HYDRAULICS, APPROX WEIGHT: 22,000 LBS. EACH, PRESS #6 125 TALL, OTHER PRESS 140 TALL WITH PUSHBACKS, WITHOUT: 125 (613)
|
🔒 Subscribe | |
|
|
2012 | COLD FEED | SJ-65 |
2012 COLD FEED SJ-65 2.5" SILICONE RUBBER EXTRUDER WITH 65 MM SCREW, SILICONE PROFILE & RUBBER PROFILE USAGE, L/D: 12:1, POWER ROLL FEED ASSEMBLY WRAP AROUND, 45 HP DC MOTOR, 460 VOLT, WITH CONTROLLER, FREE STANDING CONTROL PANEL, ROTARY UNION, SAFETY GUARDS, JACKETED MULTIPLE ZONE BARREL, MOUNTED ON ISOLATION DAMPENERS WITH LEVELLING PINS (682)
|
🔒 Subscribe |
|
|
FARREL | BANBURY OOC MIXER |
FARREL BANBURY OOC MIXER WITH 6 LB. @ SPECIFIC GRAVITY OF 1 BATCH CAPACITY, TYPES OF MATERIAL RAN: PLASTICS & VINYL, MIXING CAPACITY: 6 LBS., FREE STANDING DC DRIVE CABINET WITH OPERATOR'S CONTROLS, ENGINEERING FILES & MANUALS, US MOTORS 60 HP DC VARIABLE SPEED, 480 VOLT, 0 - 1,750 RPM, ALL MOUNTED ON STEEL FABRICATED FLOOR LEVEL STAND (292) S/N: 996095
|
🔒 Subscribe | |
|
|
2012 | SJ-65 |
2012 SJ-65 COLD FEED 2.5" SILICONE RUBBER EXTRUDER WITH 65 MM SCREW, SILICONE PROFILE & RUBBER PROFILE USAGE, L/D: 12:1, POWER ROLL FEED ASSEMBLY WRAP AROUND, 45 HP DC MOTOR, 460 VOLT, WITH CONTROLLER, FREE STANDING CONTROL PANEL, ROTARY UNION, SAFETY GUARDS, JACKETED MULTIPLE ZONE BARREL, MOUNTED ON ISOLATION DAMPENERS WITH LEVELLING PINS (455)
|
🔒 Subscribe | |
|
|
WABASH | 150-18-2TM |
WABASH 150-18-2TM 150-TON HYDRAULIC PRESS, S/N 5696, WITH (4) 18" X 18" X 3" PLATENS ELECTRIC HEAT WATER COOLED, ATTACHED CONTROL PANEL WITH DIGITAL TEMP. CONTROLLERS, 11" X 22" BETWEEN POSTS, (2) 4" OPENINGS, 21" EMPTY DAYLIGHT, (4) 3" STRAIN RODS, 48" WORK HEIGHT, 5 HP HYDRAULIC SYSTEM, 480/3/60, 5 HP HYD PUMP, 58 LR X 42 FB X 80 T, 5,500LBS.
|
🔒 Subscribe | |
|
|
1989 | EEMCO | TWIN 315-TON HYDRAULIC PRESSES |
1989 EEMCO TWIN 315-TON HYDRAULIC PRESSES & PUMP S/N: 89-3618 & 89-3614, WITH (3) 24 X 32 ELECTRIC PLATENS, 480 VOLT, WATLOW TEMP CONTROL, ATTACHED ROLL OUT TABLES EACH, (2) 7 OPENINGS, 21 TDLO, 28 LEFT TO RIGHT BETWEEN SIDES, 3 SLAB SIDE THICKNESS, 5.5 GUIDED BOLSTER, ATTACHED CONTROL PANEL WITH AB PLC, 34 WORK HEIGHT FROM FLOOR TO BOLSTER, 20 DIAMETER RAM X 14 STROKE, DIM 61 TALL X 52 LR X 90 D WITH WORK TABLE & MOLD EJECTOR ON #3618, DIM 61 TALL X 52 LR X 74 D WITH WORK TABLE ONLY ON #3614, SHIP WEIGHT 12,000LBS. EACH, CENTRAL DUAL PRESS RACINE HYDRAULIC POWER PACK 2,000 PSI RATED, RESERVOIR TANK SIZE: 62 LR X 30 FB X 24 T, 20 HP LINCOLN AC MOTOR, 220/440 VOLT, DIM 3 X 5, WEIGHT 3,000 LBS.
|
🔒 Subscribe |
|
|
1989 | FRENCH OIL | 800-TON HYDRAULIC PRESS |
1989 FRENCH OIL 800-TON HYDRAULIC PRESS #6, WITH (1) 32 X 32 X 2.5 ELECTRIC PLATEN, WORKING DISTANCE BETWEEN SLABS 34, TOTAL DAYLIGHT EMPTY 27, SLAB SIDE WALL THICKNESS 5.5, HEAD THICKNESS 13, WORK HEIGHT 48, BOLSTER SIZE 33.75 X 32 X 7.25, 26 RAM X 18 STROKE, 3 HYDRAULIC INLET, ATTACHED CONTROL PANEL, OVERALL OUTSIDE DIM. 46.5 LR X 24 FB X 124 T, PUSH CYLINDERS HEIGHT 31, OVERALL HEIGHT OF PRESS ONLY 93, 25 HP/15 HP HYDRAULIC REXROTH, 3,000 HIGH/300 LOW SYSTEM BY HIGHTEC FLUID POWER SYS. WITH ATTACHED CONTROL PANEL. MISSING LOW PRESSURE PUMP, SLAB SIDE HEAVY DUTY CONSTRUCTION, APPROX. 25,000 LBS.
|
🔒 Subscribe |
|
|
USF | AUTOJET 36'' X 144'' |
USF AUTOJET 36'' X 144'' AUTOCLAVE, WITH NATIONAL BOARD CODED #608, 36 X 144, RADIANT DRY HEATING, 135 PSI, HYDRO TESTED 202 PSI, CART WITH WHEELS AND RAILS, HINGED SWING DOOR, PREVIOUS USAGE: PRESSURE TREATING WOOD, WEIGHT 8,000 LBS.
|
🔒 Subscribe | |
|
|
EGAN | 3.5 |
EGAN 3.5 PLASTIC EXTRUDER, 3.5 SCREW DIAMETER, 30:1 L/D, 103 WATER-COOLED ZONED BARREL, 3 FEED OPENING, FILM DIE HEAD, 125 HP BALDOR DC MOTOR, 500 VOLT, 1,750 RPM, MOUNTED CONTROL CABINET, 47" CENTERLINE, LAST MAKING FILM FOR MEAT AND OTHER GROCERY ITEMS, MOUNTED OPERATORS PANEL, ALL MOUNTED ON FLOOR LEVEL STEEL BASE S/N: C00685
|
🔒 Subscribe | |
|
|
BOLLING | 24" TWO-ROLL MILL |
BOLLING 24" TWO-ROLL MILL, WITH (2) 10 X 24 CORED CHROMED ROLLS WITH ROTARY UNIONS, ALL AROUND INBOARD SEALS, FLIP STOCK STAINLESS STEEL GUIDES, RATCHET ROLL ADJUSTMENT, MOUNTED .25 HP MOTORIZED MATERIAL PLOW, ATTACHED OPERATORS CONTROL, 20 HP MOTOR, 480 VOLT, WALL MOUNTED ELECTRICAL BOX, ABOVE HEAD MOUNTED EXHAUST HOOD, HEAVY DUTY CABINET MILL, 42" WORK HEIGHT, ELECTRIC SCHEMATICS & HITACHI DRIVE MANUAL, 95" X 36" (900)
|
🔒 Subscribe | |
|
|
WABASH | 150-26-TRMX |
WABASH 150-26-TRMX 150-TON HYDRAULIC PRESS & PUMP, S/N 6611-1, WITH (2) 26 X 26 ELECTRIC HEAT PLATENS, 28" LEFT TO RIGHT BETWEEN POSTS, 5" FULLY GUIDED BOLSTER, 14 RAM X 10 STROKE, 10" WORKING DAYLIGHT, ADJUSTABLE TO 20" WITH 6" SPACER INSTALLED, 39.5" WORK HEIGHT, CONTROL PANEL WITH (2) DIGITAL TEMPERATURE CONTROLLERS & TIMERS, 10 HP HYDRAULIC SYSTEM, 460 VOLT, (2) MOUNTED HYDRAULIC PULL-BACK CYLINDERS, (1) MOUNTED TRANSFER CYLINDER ON TOP, BUT REGULAR COMPRESSION MOLDING PLATENS INSTALLED, APPROX 12,000 LBS., PRESS 46 LR X 46 FB X 86 T, TANK 61 LR X 42 FB X 77 T
|
🔒 Subscribe | |
|
|
FARREL | OOC 8 LB. BANBURY MIXER |
FARREL OOC 8 LB. BANBURY MIXER WITH 8LB @ SPECIFIC GRAVITY OF 1 BATCH CAPACITY, 8" X 6" FEED, FREE STANDING GE DC DRIVE CABINET WITH OPERATORS CONTROLS, GE MOTOR 40 HP DC VARIABLE SPEED, 480 VOLT, 0 - 1,750 RPM, TYPES OF MATERIAL RAN: SILICONE RUBBER, ALL MOUNTED ON STEEL FABRICATED FLOOR LEVEL STAND, 102" X 44", APPROX. 6,500 LBS. S/N: 85A 1209
|
🔒 Subscribe | |
|
|
1992 | WABASH GENESIS | 30-TON HYDRAULIC PRESS |
1992 WABASH GENESIS 30-TON HYDRAULIC PRESS, WITH (4) 12" X 12" ELECTRICALLY HEATED, WATER COOLED, PLATENS WITH TWO DAYLIGHTS, EACH PLATEN HAS 4,500 WATTS OF HEATING, APPROXIMATELY 4" DAYLIGHT IN EACH OPENING, 5" X 6" COMPRESSION CYLINDER, 17" WIDE TIE BAR SPACING, INTEGRAL 2 HP HYDRAULIC PUMP, CONTROL PANEL WITH ALLEN BRADLEY CONTROLLER AND ALL OTHER CONTROLS, 460 VOLT OPERATION, 29 MAXIMUM AMP LOAD
|
🔒 Subscribe |
|
|
2018 | PHI | 0236H |
2018 PHI 0236H 30-TON HYDRAULIC PRESS, S/N: 18-11-005, WITH (2) 12.5 X 12.5 ELECTRIC HEAT PLATENS, 400/3/60, ATTACHED DIGITAL CONTROL PANEL, 120 VOLT, 5 RAM WITH 4" REMOVABLE EXTENSION, TABLE MODEL MANUAL PRESS (798)
|
🔒 Subscribe |
|
|
PHI 50R1818S-2HS-P-MS8-R |
PHI 50R1818S-2HS-P-MS8-R 50-TON HYDRAULIC PRESS, S/N 81-12-017, WITH (2) 18 X 18 ELECTRIC HEAT WATER COOLED PLATENS, 650 F MAX, RAN 250 F TO 400 F, 22" LEFT TO RIGHT X 11.5" BETWEEN POSTS FRONT TO BACK, 10" ADJUSTABLE DAYLIGHT, WORK HEIGHT 44", 480 VOLT, WATER COOLED HEAD & BOLSTER, ATTACHED CONTROL PANEL WITH DIGITAL TEMPERATURE CONTROLLERS, 1.5 HP, HYDRAULIC SYSTEM WITH 6" DIAMETER RAM, LAST USE: RAYTHEON LAB COMPOSITE MATERIAL, 66" X 46" X 74"
|
🔒 Subscribe | ||
|
|
CRYOGENIC SYSTEMS | LBC 4000 |
CRYOGENIC SYSTEMS LBC 4000 DEFLASHING UNIT, WITH STAINLESS STEEL, CONTROL PANEL WITH PLC, BASKET 32" X 38" X 75" (881)
|
🔒 Subscribe | |
|
|
1989 | FRENCH OIL | 452-TON HYDRAULIC PRESS |
1989 FRENCH OIL 452-TON HYDRAULIC PRESS #5, WITH (2) 30 X 24 X 2 ELECTRIC PLATENS, WORKING DAYLIGHT 15.375 BETWEEN HEAD AND PLATENS, TOTAL EMPTY DAYLIGHT 20.5, SLAB SIDE WALL THICKNESS 4.75, HEAD THICKNESS 20, WORKING DISTANCE BETWEEN SLABS 31, WORK HEIGHT 42.5, BOLSTER SIZE 30 X 24 X 5.5, 24 RAM X 18 STROKE, 3 HYDRAULIC INLET, ATTACHED CONTROL PANEL WITH SOME MISSING COMPONENTS, OVERALL OUTSIDE DIM. 41 LR X 24 FB X 91.5 T, PUSH CYLINDERS HEIGHT 17.5 OVERALL HEIGHT OF PRESS ONLY 104, 25 HP/15 HP HYDRAULIC REXROTH 3,000 HIGH/300 LOW SYSTEM BY HIGHTEC FLUID POWER SYS. WITH ATTACHED CONTROL PANEL, SLAB SIDE HEAVY DUTY CONSTRUCTION, WEIGHT 25,000 LBS.
|
🔒 Subscribe |
|
|
1998 | TMP | 175-TON VACUUM PRECISION MOLDING HYDRAULIC PRESS |
1998 TMP 175-TON VACUUM PRECISION MOLDING HYDRAULIC PRESS S/N: 21578, WITH (3) 36 X 36 ELECTRIC HEAT WATER COOLED PLATENS, PRESS STYLE: SLAB SIDE, (2) 10 OPENINGS, 21 STROKE, 13 RAM @ 3,000 PSI, FREE STANDING DIGITAL CONTROL PANEL WITH HYDRAULICS, 5 HP VACUUM SYSTEM, APPROX. 26,000 LBS.
|
🔒 Subscribe |
|
|
2014 | 28'' TWO-ROLL MILL |
2014 28'' TWO-ROLL MILL 12 X 28'' TWO-ROLL MILL, (2) 12 X 28 CORED ROLLS WITH INBOARD/OUTBOARD SEALS, 20-25 LB. BATCH, ROLLER BEARING BOXES, TOP CAP CONSTRUCTION, MILL PAN, DIRECT DRIVE ROLLER BEARING GEAR REDUCER 56:1, UNITIZED BASE, MILL MOTOR STARTER, 30 HP AC MOTOR, 1,200 RPM, 460 VOLT, ALL ASSEMBLED ON 1 PIECE FRAME BASE (696)
|
🔒 Subscribe | |
|
|
HOLMES | 565-TON |
HOLMES 565-TON HYDRAULIC PRESS & PUMP WITH (2) 30 X 30 X 2.5" T-SLOT ELECTRIC HEAT PLATENS, 460/3/60, ATTACHED DIGITAL CONTROL PANEL FOR OPERATOR, 24 WORKING DAYLIGHT ADJUSTABLE TO 28, 44 WORK HEIGHT, MOLD TRANSFER MOUNTED CYLINDER WITH DETACHABLE WORK TABLE, FULLY GUIDED BOLSTER, 5 STRAIN RODS, 24 DIAMETER RAM, 20 STROKE, APPROX. 18,000 LBS., PRESS DIM. 50 LR X 94 FB X 106 T, CONTINENTAL HYDRAULICS SYSTEM, 10 HP HIGH PRESSURE LOW VOLUME PUMP 220/440V, 5 HP LOW PRESSURE HIGH VOLUME PUMP 220/440V, 2,500 PSI SYSTEM, ALL HOSES & GAUGES WITH MOUNTED OPERATOR'S CONTROL PANEL, 90-GALLON TANK RESERVOIR, PUMP DIM. 70 X 36 X 68 T
|
🔒 Subscribe | |
|
|
1997 | GALBREATH | PW60-50HD |
1997 GALBREATH PW60-50HD CLOSED DOOR WIDE MOUTH HORIZONTAL BALER S/N: HB112, WITH 60" X 48" X 36" BALE SIZE, 48" X 50" FEED OPENING, 8" CYLINDER, 30 HP (867)
|
🔒 Subscribe |
|
|
1991 | NIPPON | 20 |
1991 NIPPON 20 TWO-ROLL MILL S/N: D-3115 WITH (2) 20 CORED ROLLS WITH ROTARY UNIONS, 13.2 RPM FRONT ROLL SPEED, BEARING BOX INBOARD SEALS, ADJUSTABLE IN-OUT GUIDES, MICROSET RATCHET ROLL ADJUSTMENTS, TOP CAP CONSTRUCTION, DIRECT DRIVE GEAR REDUCER, 10 HP AC INDUCTION MOTOR, 220 VOLT, ATTACHED CONTROL PANEL WITH ALARM & LOCK OUT KEY, MIXING MILL R & D, 38 X 125 X 68, APPROX. 7,000 LBS.
|
🔒 Subscribe |
|
|
CLIFTON | 100-TON |
CLIFTON 100-TON HYDRAULIC PRESS, (2) 20 X 22.5 ELECTRIC HEAT PLATENS, (4) 3.5" RODS, 12" ADJUSTABLE DAYLIGHT TO 20", ATTACHED CONTROL PANEL ALL DIGITAL, HEAVY DUTY 4-POST DESIGN, FULLY GUIDED BOLSTER, ROLL OUT TABLE, INTEGRATED HYDRAULIC SYSTEM, 240/480 VOLT, & 120/240 VOLT, 50" L X 50" W X 74" H, APPROX. 6,500 LBS.
|
🔒 Subscribe | |
|
|
RUBBER EQUIPMENT INC OF CALIFORNIA | 19'' TWO-ROLL MILL |
RUBBER EQUIPMENT INC OF CALIFORNIA 19'' TWO-ROLL MILL WITH (2) 8 X 19 CORED & CHROMED ROLLS, 18 WORKING SURFACE BETWEEN GUIDES, SPLIT ADJUSTABLE CHROMED FACED STOCK GUIDES, MATERIAL PLOW BRACKETS FRONT & REAR (NO PLOW), DUAL GEARING, ZURN STYLE LUBE FITTINGS, SILENT CHAIN & SPROCKET DRIVE ASSEMBLY, TOP CAP HEAVY DUTY CONSTRUCTION, 10 HP, 220 VOLT MOTOR & DRIVE ASSEMBLY, OPERATORS POD & ATTACHED CONTROL PANEL, STEEL CABINET BASE, PREVIOUS USAGE: SILICONE RUBBER MATERIAL FOR MOLDING SEALS, 5,000 LBS., 50 X 30 X 60
|
🔒 Subscribe | |
|
|
FARREL | 13" VARIABLE SPEED LAB MILL |
FARREL 13" VARIABLE SPEED LAB MILL WITH SPLIT STOCK GUIDES WITH FLIP UP, ROTARY UNIONS, MICROSET ROLL ADJUSTMENTS, MILL PAN, OPERATORS POD, FRONT & REAR SAFETY, VARIABLE SPEED CRANK WITH VARIABLE SPEED MOTOR, 480 VOLT & STARTER BY FARREL, CABINET STYLE, 4,000 LBS., 4' X 6' (718) S/N: 74-A-1317
|
🔒 Subscribe | |
|
|
US MOTOR MFG. | 150 HP AC MILL MOTOR |
US MOTOR MFG. 150 HP AC MILL MOTOR & GEARBOX DRIVE, WITH BASE, RIGHT ANGLE DRIVE ASSEMBLY, 440 VOLT, 1,770 RPM, 3 X 6 OUTPUT SHAFT WITH COUPLING HALF, CENTER LINE D DIMENSION 14, JONES MFG. GEAR REDUCER, 87:1 GEAR RATIO, 1,750 RPM, 20 RPM OUTPUT, 7.5 DIAMETER OUTPUT SHAFT X 2.5 INPUT WITH 1/2 CHAIN SPROCKET COUPLING, 20 CENTER LINE, MOUNTED AIR BREAK WITH AIR TANK ASSEMBLY, ALL MOUNTED ON 8.5 I-BEAM STEEL FABRICATED BOLT TO KEY BASE, LAST USE: 60 TWO ROLL MILL DRIVE
|
🔒 Subscribe | |
|
|
DAKE | 945200 |
DAKE 945200 150-TON HYDRAULIC PRESS, WITH (2) 25 X 25 X 2.5 ELECTRIC HEAT PLATENS, 230/3/60, ATTACHED OPERATORS CONTROL PANEL WITH DIGITAL TEMP CONTROLLERS, 0 - 500 F OPERATION, WORKING DAYLIGHT 16 ADJUSTABLE TO 28, RAM STROKE 16, 8 DIAMETER, CLOSING SPEED 17 TRAVEL PER MINUTE, 50 WORK HEIGHT, MAXIMUM LR BETWEEN POSTS 29, 5 FULLY GUIDED BOLSTER, (4) 3.25 STRAIN RODS, 6 STEEL HEAD, 10 HP, 1,745 RPM, 230/460/3/60 HYDRAULIC SYSTEM, 60 LR X 44 FB X 90, APPROX. 8,800 LBS. S/N: 186204
|
🔒 Subscribe | |
|
|
MODERN | 419 |
MODERN 0419 200-TON 4-POST HYDRAULIC PRESS & PUMP, S/N 2223, WITH (2) 26 X 16 ELECTRIC HEAT PLATENS, FULLY GUIDED STEEL BOLSTER 28" X 28" X 5", BETWEEN POSTS 28" LR X 16" FB, (4) 3.5" STRAIN RODS, 13" RAM @ 3,000 PSI, 16 STROKE, 8" HEAD, 46" WORK HEIGHT, 29 DAYLIGHT (34" EMPTY), COMPLETE OPERATORS CONTROL PANEL PER PHOTO, DUAL PALM,-TONNAGE CONTROL VALVE, DIGITAL TEMPERATURE CONTROLLERS AND TIMER, FREE STANDING HYDRAULIC POWER PACK, PREVIOUS USAGE: MOLDING CARBON FIBER PARTS, PRESS 40 X 28 X 88, PUMP 20 X 40 X 55, CONTROL PANEL 20 X 29 X 66
|
🔒 Subscribe | |
|
|
PHI | BV-243-H-M-C |
PHI BV-243-H-M-C 50-TON HYDRAULIC PRESS, WITH (2) ELECTRIC HEAT 15X 18 PLATENS, MOLD SHUTTLE, 1.5 HP HYDRAULIC MOTOR & PUMP, 240/3/60, CABINET MOUNTED, ATTACHED CONTROL PANEL 110 VOLT WITH ATTACHED DISCONNECT, WEIGHT 1,800 LBS.
|
🔒 Subscribe | |
|
|
100 HP HEAVY DUTY GRANULATOR, WITH OPEN ROTOR, FEED OPENING 15 X 24.5, 8" DISCHARGE, 100 HP MOTOR, 220/440 VOLT, MOUNTED OPERATOR'S POD, BOTTOM DISCHARGE PORT, STEEL TUBE BASE, 45" X 100" (915)
|
🔒 Subscribe | |||
|
|
TMP | 100-TON MOLDING HYDRAULIC PRESS |
TMP 100-TON MOLDING HYDRAULIC PRESS WITH (2) 20 X 20 X 2.5" ELECTRIC HEAT PLATENS, 22" BETWEEN POSTS L-R, 8 RAM WITH FULLY GUIDED 6" BOLSTER, 18" STROKE, (4) 3" STRAIN RODS, 7" THICK HEAD, 20" TOTAL DAYLIGHT OPENING, 8" CURRENT ADJUSTABLE DAYLIGHT PLUS 4" REMOVABLE SPACER, ATTACHED HYDRAULIC SYSTEM & CONTROL PANEL, 440 VOLT, PREVIOUS USAGE: SILICONE MOLDING, 42" X 36" X 71" T (730)
|
🔒 Subscribe | |
|
|
MOKON | MK4H09F8 |
MOKON MK4H09F8 HOT OIL UNITS, TOTAL KW 27/92,000 BTU, 460 F MAX TEMP, 3-ZONE, 9 KW EACH, 32,000 BTU EACH, (3) 1 HP MOTORS, 460/3/60, ATTACHED 3-ZONE CONTROL PANEL (683) S/N: 23932
|
🔒 Subscribe | |
|
|
WABASH | 30-1515-2T-2WCMB |
WABASH 30-1515-2T-2WCMB 30-TON LAB HYDRAULIC PRESS S/N: 6944, WITH (2) 15 X 15 ELECTRIC PLATENS, (2) DIGITAL TEMPERATURE CONTROLLERS, (2) 15 X 15 WATER-COOLED PLATENS, 4-POST, ADJUSTABLE OPENING, ATTACHED OPERATOR'S CONTROL PANEL, 1 HP, 460/3/60, ALL MOUNTED ON CABINET STYLE FRAME
|
🔒 Subscribe | |
|
|
1988 | FRENCH OIL | 680-TON HYDRAULIC PRESS |
1988 FRENCH OIL 680-TON HYDRAULIC PRESS #1 WITH (1) 30 X 24 X 3 ELECTRIC PLATEN, 2 REMOVABLE SPACER, ATTACHED CONTROL PANEL, WORKING DAYLIGHT 23.5 BETWEEN HEAD AND PLATEN, TOTAL EMPTY DAYLIGHT 29.5, SLAB SIDE WALL THICKNESS 8.5, WORKING DISTANCE BETWEEN SLABS 37, WORK HEIGHT 50, BOLSTER SIZE 36.5 X 24 X 6.75, 24 RAM X 18 STROKE, 3 HYDRAULIC INLET, OVERALL OUTSIDE DIM. 54 LR X 24 FB X 136 T, PUSH CYLINDERS HEIGHT 31, HYD PUMP INCOMPLETE: GAUGES MISSING, ATTACHED CONTROL PANEL ON PUMP, 25 HP/15 HP HYDRAULIC HIGH/LOW SYSTEM BY REXROTH, SLAB SIDE HEAVY DUTY CONSTRUCTION
|
🔒 Subscribe |
|
|
1997 | DEIFFENBACHER | 450-TON HYDRAULIC PRESS |
1997 DEIFFENBACHER 450-TON HYDRAULIC PRESS WITH HEAVY DUTY WINDOWFRAME CONSTRUCTION, (2) 34 X 34 X 3 OIL HEATED PLATENS WITH STAINLESS STEEL HOSE, (2) 34 X 34 X 1 INSULATION BOARDS, LEFT TO RIGHT BETWEEN FRAMES 40, 18 DAYLIGHT WITH 5 REMOVABLE SPACER INSTALLED, TOTAL DAYLIGHT EMPTY 32, 26 DAYLIGHT NO PLATENS, 18 STROKE PLUS, 6 FULLY GUIDED BOLSTER WITH ADJUSTABLE, WORK HEIGHT 54, FRAME POSTS 9 LR X 3D, 40 HP REXROTH HYDRAULIC POWER UNIT, 440 VOLT, HYDRAULIC TANK 60 LR X 24 T X 30 FB, PUMP 68 LR X 48 FB X 66 T, OPERATOR'S CONTROL STATION, DESKTOP COMPUTER, MANUALS, APPROX. 18,500 LBS., 110 T X 73 LR X 47 D, LAST USAGE: LAB PRESS FOR BIO COMPOSITES (454)
|
🔒 Subscribe |
|
|
1200-TON HEAVY DUTY HYDRAULIC MOLDING PRESS, WITH 60" X 60" CAPACITY, PRESS RATED @ 2,000 PSI 1600-TON CAPABILITY, HEAVY DUTY SLAB SIDE, CONSTRUCTION, (2) 60X X 60 ELECTRIC HEAT PLATENS, 440 VOLT, ATTACHED CONTROL PANEL, 9.5 DAYLIGHT BETWEEN PLATENS, 46 RAM, SIDE MOUNTED HYDRAULIC PUSHBACKS, 30 HP HYDRAULIC SYSTEM, (2) MOTORS, 8'2" LR X 7' FB X 10' T, APPROX. 90,000 LBS., HYDRAULIC PUMP 9'8" LR X 8'4'' FB X 7' T, APPROX. 5,000 LBS.
|
🔒 Subscribe | |||
|
|
1988 | FRENCH OIL | 680-TON HYDRAULIC PRESS |
1988 FRENCH OIL 680-TON HYDRAULIC PRESS #2, WITH (2) 30 X 24 X 2 ELECTRIC PLATENS, WORKING DAYLIGHT 20 BETWEEN HEAD AND PLATENS, TOTAL EMPTY DAYLIGHT 23.5, SLAB SIDE WALL THICKNESS 8.5, WORKING DISTANCE BETWEEN SLABS 37, WORK HEIGHT 50, BOLSTER SIZE 34 X 24 X 7, 24 RAM X 18 STROKE, 3.5 HYDRAULIC INLET, ATTACHED CONTROL PANEL WITH MISSING PARTS, OVERALL OUTSIDE DIM. 54 LR X 24 FB X 136 T, ADD 14 FOR CONTROL PANEL LR, PUSH CYLINDERS HEIGHT 32, OVERALL HEIGHT OF PRESS ONLY 104, REXROTH 25 HP/15 HP HIGH LOW HYDRAULIC SYSTEM WITH ATTACHED CONTROL, 25 HP/5 HP HYDRAULIC HIGH/LOW SYSTEM BY REXROTH, SLAB SIDE HEAVY DUTY CONSTRUCTION, WEIGHT 25,000 LBS.
|
🔒 Subscribe |
|
|
1989 | FRENCH OIL | 680-TON HYDRAULIC PRESS |
1989 FRENCH OIL 680-TON HYDRAULIC PRESS #3 WITH (2) 30 X 24 X 2 ELECTRIC PLATENS, WORKING DAYLIGHT 20.5 BETWEEN HEAD AND PLATENS, TOTAL EMPTY DAYLIGHT 29.5, SLAB SIDE WALL THICKNESS 8.5, WORKING DISTANCE BETWEEN SLABS 37, WORK HEIGHT 50, BOLSTER SIZE 36 X 25 X 7, 24 RAM X 18 STROKE, 3 HYDRAULIC INLET, ATTACHED CONTROL PANEL WITH MISSING PARTS, OVERALL OUTSIDE DIM. 54 LR X 24 FB X 136.5 T ADD 14 FOR CONTROL PANEL LR, PUSH CYLINDERS HEIGHT 32.5, OVERALL HEIGHT OF PRESS ONLY 104, 25 HP/15 HP HIGH LOW HYDRAULIC SYSTEM WITH ATTACHED CONTROL, 25 HP/15 HP HYDRAULIC REXROTH 3,000 HIGH/300 LOW SYSTEM BY HIGHTEC FLUID POWER SYS., SLAB SIDE HEAVY DUTY CONSTRUCTION, WEIGHT 25,000 LBS.
|
🔒 Subscribe |
|
|
2019 | GOODMAN | 72 |
2019 GOODMAN 72 72" RUBBER ROTARY SHEAR SLITTER S/N: 3637, WITH 72 WIDE CONTINUOUS ADJUSTABLE SHEET CUTTER, MAX CUT UP TO .5" PVC, RUBBER SLAB, HEAVY COMPOSITE MATERIAL, OPERATOR'S CONTROL PANEL, PREVIOUS USAGE: CALENDERED VINYL AUTOMOTIVE SHEET SHEARING, WEIGHT 25,000 LBS., 20' LONG
|
🔒 Subscribe |
|
|
1997 | DAVIS STANDARD | 3.5" RUBBER EXTRUDER |
1997 DAVIS STANDARD 3.5" RUBBER EXTRUDER, S/N: T-78035, WITH L/D: 12:1, US MOTOR 75 HP DC, 1,750 RPM, 480 VOLT, SCREW TYPE: SINGLE WITH ROTARY UNION, GEAR RATIO- 24.88:1, S.F.- 1.25, GEAR REDUCER MAXIMUM HORSEPOWER RATING- 100 HP, ROLLER SPEED OPERATOR CONTROL STATION, POWER ROLL FEED ASSEMBLY, PRESSURE METERS FOR: HEAD BRAKE, HEAD EXTEND & SENSOR, ELECTRICAL PANEL, OPERATOR CONTROL STATIONS, MACHINE MOUNTED ON VARIABLE SPEED TRAVEL CAR, (1) EXTRA SCREW AND BARREL, MOTOR CIRCUIT CONTROL WITH (3) TEMP ZONE METERS, PREVIOUS USAGE: PAPER MILL RUBBER-COVERED ROLLS, 130" L-R X 110" F-B X 98" HIGH, INCLUDED & MOUNTED HAYDEN COOLING SYSTEM 97 (260)
|
🔒 Subscribe |
|
|
PHI | S70R-374-C-X-Y4 |
PHI S70R-374-C-X-Y4 70-TON MULTI-PLATEN HYDRAULIC PRESS, S/N 5973, WITH (3) 24.5 X 24.5 ELECTRIC HEAT WATER COOLED PLATENS, 480/120/60/3, 0 - 600 F, 6.75 RAM, 4-POST DESIGN WITH ADJUSTABLE DAYLIGHT, FULLY GUIDED BOLSTER, OPERATORS CONTROL PANEL ATTACHED, 2 HP HYDRAULICS
|
🔒 Subscribe |
1994 HERCULES 54" X 156"
MISC
1994 HERCULES 54" X 156" DRY HEAT AUTOCLAVE WITH MAXIMUM ID LEFT TO RIGHT 59", NATIONAL BOARD CODED,...
Hammer Price:
🔒
2000 FARREL 84
MISC
2000 FARREL 84 TWO-ROLL RUBBER MILL WITH (2) CORED CHILLED IRON 26 X 26 X 84 ROLLS WITH ROTARY UNION...
Hammer Price:
🔒
2002 WAYNE 3
PLASTICS PROCESSING EQUIPMENT
2002 WAYNE 3 SILICONE EXTRUDER WITH 3" X 42" SCREW, 14:1 L/D COLD FEED EXTRUDER, POWER ROLL FEED WIT...
Hammer Price:
🔒
DAKE 33-459
PRESSES & FORMING
DAKE 33-459 200-TON HYDRAULIC PRESS, S/N 167904, WITH (2) 36 X 36 ELECTRIC HEAT PLATENS 240/1, 15,75...
Hammer Price:
🔒
NRM PM III VTD 3.5
PLASTICS PROCESSING EQUIPMENT
NRM PM III VTD 3.5 COLD FEED RUBBER/SILICONE EXTRUDER, S/N T59235, WITH 2-PIECE JACKETED BARREL, QUI...
Hammer Price:
🔒
1997 BAKER PERKINS 50-GALLON SIGMA TILT MIXER
CHEMICAL PROCESSING EQUIPMENT
1997 BAKER PERKINS 50-GALLON SIGMA TILT MIXER, REBUILT, WITH STAINLESS STEEL JACKETED BOWL & S/S Z-B...
Hammer Price:
🔒
DEPENDABLE RUBBER MACHINERY 30" THREE-ROLL CALENDER
MISC
DEPENDABLE RUBBER MACHINERY 30" THREE-ROLL CALENDER, S/N 4632-77, WITH (3) 12 X 30 CORED CHILLED IRO...
Hammer Price:
🔒
UNITED RUBBER MACHINERY EXCHANGE 48'' TWO-ROLL MILL
MISC
UNITED RUBBER MACHINERY EXCHANGE 48'' TWO-ROLL MILL WITH TOP CAP MILL DESIGN, (2) 18 X 48 CORED CHRO...
Hammer Price:
🔒
2000 FRENCH OIL 452-TON
PRESSES & FORMING
2000 FRENCH OIL 452-TON HYDRAULIC PRESSES WITH 32.5" X 25.5" BED AREA OPENING, HEAVY DUTY SLAB SIDE ...
Hammer Price:
🔒
HOLMES TWIN 500-TON HYDRAULIC PRESSES
PRESSES & FORMING
HOLMES TWIN 500-TON HYDRAULIC PRESSES WITH (4) 32 X 32 ELECTRIC HEAT PLATENS, 440 VOLT PER PRESS, 33...
Hammer Price:
🔒
2012 COLD FEED SJ-65
PLASTICS PROCESSING EQUIPMENT
2012 COLD FEED SJ-65 2.5" SILICONE RUBBER EXTRUDER WITH 65 MM SCREW, SILICONE PROFILE & RUBBER PROFI...
Hammer Price:
🔒
FARREL BANBURY OOC MIXER
PLASTICS PROCESSING EQUIPMENT
FARREL BANBURY OOC MIXER WITH 6 LB. @ SPECIFIC GRAVITY OF 1 BATCH CAPACITY, TYPES OF MATERIAL RAN: P...
Hammer Price:
🔒
2012 SJ-65
PLASTICS PROCESSING EQUIPMENT
2012 SJ-65 COLD FEED 2.5" SILICONE RUBBER EXTRUDER WITH 65 MM SCREW, SILICONE PROFILE & RUBBER PROFI...
Hammer Price:
🔒
WABASH 150-18-2TM
PRESSES & FORMING
WABASH 150-18-2TM 150-TON HYDRAULIC PRESS, S/N 5696, WITH (4) 18" X 18" X 3" PLATENS ELECTRIC HEAT W...
Hammer Price:
🔒
1989 EEMCO TWIN 315-TON HYDRAULIC PRESSES
PRESSES & FORMING
1989 EEMCO TWIN 315-TON HYDRAULIC PRESSES & PUMP S/N: 89-3618 & 89-3614, WITH (3) 24 X 32 ELECTRIC P...
Hammer Price:
🔒
1989 FRENCH OIL 800-TON HYDRAULIC PRESS
PRESSES & FORMING
1989 FRENCH OIL 800-TON HYDRAULIC PRESS #6, WITH (1) 32 X 32 X 2.5 ELECTRIC PLATEN, WORKING DISTANCE...
Hammer Price:
🔒
USF AUTOJET 36'' X 144''
MISC
USF AUTOJET 36'' X 144'' AUTOCLAVE, WITH NATIONAL BOARD CODED #608, 36 X 144, RADIANT DRY HEATING, 1...
Hammer Price:
🔒
EGAN 3.5
PLASTICS PROCESSING EQUIPMENT
EGAN 3.5 PLASTIC EXTRUDER, 3.5 SCREW DIAMETER, 30:1 L/D, 103 WATER-COOLED ZONED BARREL, 3 FEED OPENI...
Hammer Price:
🔒
BOLLING 24" TWO-ROLL MILL
MISC
BOLLING 24" TWO-ROLL MILL, WITH (2) 10 X 24 CORED CHROMED ROLLS WITH ROTARY UNIONS, ALL AROUND INBOA...
Hammer Price:
🔒
WABASH 150-26-TRMX
PRESSES & FORMING
WABASH 150-26-TRMX 150-TON HYDRAULIC PRESS & PUMP, S/N 6611-1, WITH (2) 26 X 26 ELECTRIC HEAT PLATEN...
Hammer Price:
🔒
FARREL OOC 8 LB. BANBURY MIXER
MISC
FARREL OOC 8 LB. BANBURY MIXER WITH 8LB @ SPECIFIC GRAVITY OF 1 BATCH CAPACITY, 8" X 6" FEED, FREE S...
Hammer Price:
🔒
1992 WABASH GENESIS 30-TON HYDRAULIC PRESS
PRESSES & FORMING
1992 WABASH GENESIS 30-TON HYDRAULIC PRESS, WITH (4) 12" X 12" ELECTRICALLY HEATED, WATER COOLED, PL...
Hammer Price:
🔒
2018 PHI 0236H
PRESSES & FORMING
2018 PHI 0236H 30-TON HYDRAULIC PRESS, S/N: 18-11-005, WITH (2) 12.5 X 12.5 ELECTRIC HEAT PLATENS, 4...
Hammer Price:
🔒
PHI 50R1818S-2HS-P-MS8-R
PRESSES & FORMING
PHI 50R1818S-2HS-P-MS8-R 50-TON HYDRAULIC PRESS, S/N 81-12-017, WITH (2) 18 X 18 ELECTRIC HEAT WATER...
Hammer Price:
🔒
CRYOGENIC SYSTEMS LBC 4000
MISC
CRYOGENIC SYSTEMS LBC 4000 DEFLASHING UNIT, WITH STAINLESS STEEL, CONTROL PANEL WITH PLC, BASKET 32"...
Hammer Price:
🔒
1989 FRENCH OIL 452-TON HYDRAULIC PRESS
PRESSES & FORMING
1989 FRENCH OIL 452-TON HYDRAULIC PRESS #5, WITH (2) 30 X 24 X 2 ELECTRIC PLATENS, WORKING DAYLIGHT ...
Hammer Price:
🔒
1998 TMP 175-TON VACUUM PRECISION MOLDING HYDRAULIC PRESS
PRESSES & FORMING
1998 TMP 175-TON VACUUM PRECISION MOLDING HYDRAULIC PRESS S/N: 21578, WITH (3) 36 X 36 ELECTRIC HEAT...
Hammer Price:
🔒
2014 28'' TWO-ROLL MILL
MISC
2014 28'' TWO-ROLL MILL 12 X 28'' TWO-ROLL MILL, (2) 12 X 28 CORED ROLLS WITH INBOARD/OUTBOARD SEALS...
Hammer Price:
🔒
HOLMES 565-TON
PRESSES & FORMING
HOLMES 565-TON HYDRAULIC PRESS & PUMP WITH (2) 30 X 30 X 2.5" T-SLOT ELECTRIC HEAT PLATENS, 460/3/60...
Hammer Price:
🔒
1997 GALBREATH PW60-50HD
MISC
1997 GALBREATH PW60-50HD CLOSED DOOR WIDE MOUTH HORIZONTAL BALER S/N: HB112, WITH 60" X 48" X 36" BA...
Hammer Price:
🔒
1991 NIPPON 20
MISC
1991 NIPPON 20 TWO-ROLL MILL S/N: D-3115 WITH (2) 20 CORED ROLLS WITH ROTARY UNIONS, 13.2 RPM FRONT ...
Hammer Price:
🔒
CLIFTON 100-TON
PRESSES & FORMING
CLIFTON 100-TON HYDRAULIC PRESS, (2) 20 X 22.5 ELECTRIC HEAT PLATENS, (4) 3.5" RODS, 12" ADJUSTABLE ...
Hammer Price:
🔒
RUBBER EQUIPMENT INC OF CALIFORNIA 19'' TWO-ROLL MILL
MISC
RUBBER EQUIPMENT INC OF CALIFORNIA 19'' TWO-ROLL MILL WITH (2) 8 X 19 CORED & CHROMED ROLLS, 18 WORK...
Hammer Price:
🔒
FARREL 13" VARIABLE SPEED LAB MILL
MISC
FARREL 13" VARIABLE SPEED LAB MILL WITH SPLIT STOCK GUIDES WITH FLIP UP, ROTARY UNIONS, MICROSET ROL...
Hammer Price:
🔒
US MOTOR MFG. 150 HP AC MILL MOTOR
MISC
US MOTOR MFG. 150 HP AC MILL MOTOR & GEARBOX DRIVE, WITH BASE, RIGHT ANGLE DRIVE ASSEMBLY, 440 VOLT,...
Hammer Price:
🔒
DAKE 945200
PRESSES & FORMING
DAKE 945200 150-TON HYDRAULIC PRESS, WITH (2) 25 X 25 X 2.5 ELECTRIC HEAT PLATENS, 230/3/60, ATTACHE...
Hammer Price:
🔒
MODERN 419
PRESSES & FORMING
MODERN 0419 200-TON 4-POST HYDRAULIC PRESS & PUMP, S/N 2223, WITH (2) 26 X 16 ELECTRIC HEAT PLATENS,...
Hammer Price:
🔒
PHI BV-243-H-M-C
PRESSES & FORMING
PHI BV-243-H-M-C 50-TON HYDRAULIC PRESS, WITH (2) ELECTRIC HEAT 15X 18 PLATENS, MOLD SHUTTLE, 1.5 HP...
Hammer Price:
🔒
MISC
100 HP HEAVY DUTY GRANULATOR, WITH OPEN ROTOR, FEED OPENING 15 X 24.5, 8" DISCHARGE, 100 HP MOTOR, 2...
Hammer Price:
🔒
TMP 100-TON MOLDING HYDRAULIC PRESS
PRESSES & FORMING
TMP 100-TON MOLDING HYDRAULIC PRESS WITH (2) 20 X 20 X 2.5" ELECTRIC HEAT PLATENS, 22" BETWEEN POSTS...
Hammer Price:
🔒
MOKON MK4H09F8
MISC
MOKON MK4H09F8 HOT OIL UNITS, TOTAL KW 27/92,000 BTU, 460 F MAX TEMP, 3-ZONE, 9 KW EACH, 32,000 BTU ...
Hammer Price:
🔒
WABASH 30-1515-2T-2WCMB
PRESSES & FORMING
WABASH 30-1515-2T-2WCMB 30-TON LAB HYDRAULIC PRESS S/N: 6944, WITH (2) 15 X 15 ELECTRIC PLATENS, (2)...
Hammer Price:
🔒
1988 FRENCH OIL 680-TON HYDRAULIC PRESS
PRESSES & FORMING
1988 FRENCH OIL 680-TON HYDRAULIC PRESS #1 WITH (1) 30 X 24 X 3 ELECTRIC PLATEN, 2 REMOVABLE SPACER,...
Hammer Price:
🔒
1997 DEIFFENBACHER 450-TON HYDRAULIC PRESS
PRESSES & FORMING
1997 DEIFFENBACHER 450-TON HYDRAULIC PRESS WITH HEAVY DUTY WINDOWFRAME CONSTRUCTION, (2) 34 X 34 X 3...
Hammer Price:
🔒
PRESSES & FORMING
1200-TON HEAVY DUTY HYDRAULIC MOLDING PRESS, WITH 60" X 60" CAPACITY, PRESS RATED @ 2,000 PSI 1600-T...
Hammer Price:
🔒
1988 FRENCH OIL 680-TON HYDRAULIC PRESS
PRESSES & FORMING
1988 FRENCH OIL 680-TON HYDRAULIC PRESS #2, WITH (2) 30 X 24 X 2 ELECTRIC PLATENS, WORKING DAYLIGHT ...
Hammer Price:
🔒
1989 FRENCH OIL 680-TON HYDRAULIC PRESS
PRESSES & FORMING
1989 FRENCH OIL 680-TON HYDRAULIC PRESS #3 WITH (2) 30 X 24 X 2 ELECTRIC PLATENS, WORKING DAYLIGHT 2...
Hammer Price:
🔒
2019 GOODMAN 72
METALWORKING & FABRICATION EQUIPMENT
2019 GOODMAN 72 72" RUBBER ROTARY SHEAR SLITTER S/N: 3637, WITH 72 WIDE CONTINUOUS ADJUSTABLE SHEET ...
Hammer Price:
🔒
1997 DAVIS STANDARD 3.5" RUBBER EXTRUDER
MISC
1997 DAVIS STANDARD 3.5" RUBBER EXTRUDER, S/N: T-78035, WITH L/D: 12:1, US MOTOR 75 HP DC, 1,750 RPM...
Hammer Price:
🔒
PHI S70R-374-C-X-Y4
PRESSES & FORMING
PHI S70R-374-C-X-Y4 70-TON MULTI-PLATEN HYDRAULIC PRESS, S/N 5973, WITH (3) 24.5 X 24.5 ELECTRIC HEA...
Hammer Price:
🔒