Electronic Lab Test Measurement Equipment Day 1 of 3 day event

AGILENT MSO9404A MIXED SIGNAL OSCILLOSCOPE 4GHZ 20GS/S BAD POWER-PARTS. MANUFACTURER: AGILENT TECHNOLOGIES MODEL: MSO9404A MIXED SIGNAL OSCILLOSCOPE 4 CHANNELS (ANALOG OSCILLOSCOPE) 16 DIGITAL (LOGIC) CHANNELS 15" COLOR TOUCHSCREEN DISPLAY BANDWIDTH: TO 4 GHZ SAMPLING: TO 20 GSA/S WITH MEGAZOOM OPTION: 800 3 INSTRUMENTS IN ONE: OSCILLOSCOPE, LOGIC ANALYZER, PROTOCOL ANALYZER POWER REQUIREMENT: 100-240V 50/60HZ 376W. CONDITION: FOR PARTS OR NOT WORKING. COMES IN NON-ORIGINAL PACKAGING. THIS SCOPE IS IN FAIR COSMETIC CONDITION WITH MINOR BLEMISHES FROM PRIOR USE INCLUDING LIGHT SCUFFS/SCRATCHES AND RESIDUES FROM OLD ADHESIVE LABELS. THE POWER BUTTON IS MISSING. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS SCOPE IS NOT WORKING. IT IS BEING SOLD AS-IS BECAUSE IT WILL NOT POWER ON. IT CAME TO US WITH A BAD POWER SUPPLY. WE INSTALLED A POWER SUPPLY FOR TROUBLESHOOTING, AND THE COMPUTER BOOTED INTO WINDOWS XP AND LOADED THE OSCILLOSCOPE SOFTWARE. WE CALIBRATED THE TOUCH SCREEN SUCCESSFULLY. THEN WE PUT THE REAR CASE BACK ON AND ... IT KILLED THE POWER SUPPLY. AS A BONUS FAILURE, THE POWER SWITCH FELL APART DURING REASSEMBLY. THERE WAS A NOISE FROM THE AREA WHERE THE POWER SUPPLY LIVES, AND NOW THE SCOPE DOES NOT POWER ON AT ALL. WHEN A PAPER CLIP IS INSERTED TO THE HOLE FOR THE POWER BUTTON TO OPERATE THE POWER SWITCH, NOTHING AT ALL HAPPENS. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) AGILENT MSO9404A MIXED SIGNAL OSCILLOSCOPE. SKU: Y08D005 3A-08-03(1) 31LBS - 25IN X 19IN X 16IN

[100] NEW FISHERBRAND CAT NO. 22-150240 90ML 3OZ SPECIMEN CONTAINERS W/LID SPECIFICATIONS: MANUFACTURER: FISHERBRAND MODEL: 22-150240 DUOCLICK SPECIMEN CONTAINER STERILE CAPACITY: 90 ML, 3 OZ MATERIAL: POLYPROPYLENE CLOSURE TYPE: DOUBLE CLICK SCREW CERTIFICATIONS/COMPLIANCE: 95KPA COMPLIANCE OPENING SIZE: 53 MM

[SDC MODEL 561 FILTER PREWET SYSTEM] FILTER PREWET SYSTEM DI WATER @ 45 PSI (310 KPA). LINE - 1/2", FEMALE VCR TERMINATION TWO (2) FACILITIES NON-TOXIC DRAINS. LINES - ONE 1/2" SWAGELOK AND ONE 1" NUPRO QUICK-CONNECT FITTINGS. PNEUMATIC SUPPLY @ 80-95 PSI (552-655 KPA). LINE 1/4" TUBING N2 @ 35 PSI (241 KPA). LINE - 1/4", 1/4" FEMALE VCR FITTING. 110/120 VOLTS ALTERNATING-CURRENT (VAC, 50/60 HZ, 15A, SINGLE PHASE DIMENSIONS: 36"W X 24" L X 42"H. INCLUDED: (1) SDC MODEL 561 FILTER PREWET SYSTEM W/ TUBE TURNS CLASS 600 DOUBLE BOLT CLOSURE (1) TECHNICAL MANUAL BINDER (1) BAG FULL OF FITTINGS. [TUBE TURNS CLASS 600 DOUBLE BOLT CLOSURE] SIZE: 8" OPENING MATERIAL 3I6L MAXIMUM PSI: 800 @ 70 DEGREES FAHRENHEIT O-RING: BN COMES WITH FILTER CARRIAGE.

[VWR] MINI ELECTROPHORESIS SYSTEM WITH 2-3/4" X 3-15/16" GEL TRAY. MANUFACTURER: VWR. MODEL: MINI10. CAT. #: 89032-290. MAX VOLTS: 250 VDC. MAX AMPS: 250 MA. BUFFER VOLUME: 225 ML. MAX. SAMPLE CAPACITY: 64 SAMPLES. UNIT DIMENSIONS: 9W X 21L X 9H CM (31/2 X 81/4 X 31/2"). INCLUDED: (1) VWR CAT. # 89032-290 MINI ELECTROPHORESIS SYSTEM, (1) VWR 89030-936 2 3/4" 3 15/16" GEL TRAY (CRACKED). CONDITION: USED. MINOR SCUFFS AND SCRATCHES FROM PREVIOUS USE. GEL TRAY IS HEAVILY CRACKED. REMOVED FROM A WORKING ENVIRONMENT AND NOT TESTED SINCE REMOVAL. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS INCLUDED IF NOT LISTED OR SHOWN.

AGILENT N5741A DC SYSTEM POWER SUPPLY 0-6.000 V 0-100.0 AMPS 600 WATTS DIGITAL - MANUFACTURER: AGILENT TECHNOLOGIES MODEL: N5741A CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THIS SUPPLY IS IN FAIR COSMETIC CONDITION WITH MINOR SCUFFS/SCRATCHES FROM PRIOR USE. THE UNIT YOU RECEIVE MAY HAVE SOME "RACK RASH" TYPE SCRATCHES TOP AND BOTTOM, AND/OR A FEW DINGS HERE AND THERE. THE WORST EXAMPLES FROM A FEW DIFFERENT SUPPLIES WE HAVE IN STOCK ARE SHOWN. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: WE GAVE THIS SUPPLY A QUICK TEST AND FOUND IT EASILY GIVES FULL RATED CURRENT AND VOLTAGE. WE ARE NOT EQUIPPED TO TEST 100A AT 6V, BUT WE GOT 100A AT 0.1V WITH A PIECE OF FAT WIRE AS A LOAD, AND 60A AT 6V USING OUR ELECTRONIC LOAD. DIALS RESPONDED AS EXPECTED IN COARSE AND FINE MODE, THE OUTPUT ON/OFF AND LIMIT SWITCHES WORKED AS EXPECTED. VOLTAGE AND CURRENT LIMITED OPERATION WORKED WELL. FANS INCREASED SPEED WITH INCREASING LOAD. THE DISPLAYS ARE BRIGHT AND CLEAR. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) AGILENT N5741A POWER SUPPLY SPECIFICATIONS: MANUFACTURER: AGILENT TECHNOLOGIES MODEL: N5741A DC SYSTEM POWER SUPPLY MAXIMUM OUTPUT: 6V, 100A, 600W MINIMUM ADJUSTABILITY: 0.001V, 0.1A UNIVERSAL AC INPUT 100-240V 50-60HZ 970VA DIGITAL DISPLAYS FOR CURRENT AND VOLTAGE GPIB IEEE-488, LAN, USB, LXI REMOTE CONTROL FRONT PANEL LOCAL CONTROL WITH SEPARATE CURRENT/VOLTAGE DIALS COARSE AND FINE MULTI-TURN TUNING CONTROLS ANALOG/RESISTANCE CONTROL REMOTE SENSE CAPABLE CV OR CC MODE, AUTOMATIC SWITCHOVER OVER/UNDER VOLTAGE PROTECTED COMPACT DIMENSIONS: 1U RACKMOUNT SIZE (NO RACK MOUNT TABS INCLUDED) OUTPUT: FLAT LUGS INPUT: IEC-320-C14 SKU: X33D004 3A-07-02(4) 19LBS - 23IN X 23IN X 6IN

[ITT POMONA POM-5402] PLCC QUAD CLIP TEST ADAPTER 84-PIN GOLD-PLATED. LEAD PATTERN: 21 X 21. BODY SIZE: 1.15IN X 1.15IN (29.21MM X 29.21MM). PATENTED LOCK-ON DESIGN ATTACHES DIRECTLY TO THE MOUNTED SURFACE. IC AND PROVIDES HANDS-FREE ACCESS TO ALL OF THE CHIP LEADS. GOLD PLATED UPPER CONTACTS FOR NOISE FREE, LOW RESISTANCE CONNECTIONS. STANDARD .025 SQUARE PINS ACCEPT WIRE-WRAP, .025 SQ. RECEPTACLE OR SOLDERED WIRES. PLCC TEST CLIPS ATTACH TO PLCC CHIPS WITH A SLIDING CAM. STAGGERED PINS TO USE THE LEAST AMOUNT OF SPACE. TYPICAL APPLICATIONS: AMD MACH130, ALTERA EPF8452, CIRRUS LOGIC CLI6005. CONTACT MATERIAL: BERYLLIUM COPPER. ITEM WEIGHT: 0.16 OUNCES.

[LEITZ WETZLAR PL 3.2X/0.06 RMS MICROSCOPE OBJECTIVE LENS] MINOR SCRATCH ON END - MANUFACTURER: LEITZ MODEL: PL 3.2X CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THIS LENS IS IN FAIR COSMETIC CONDITION. THE BARREL HAS "QA" HAND-ETCHED IN ONE SIDE. THE TOP GLASS HAS SOME SPOTS THAT DID NOT CLEAN AWAY. THE BOTTOM LENS APPEARS TO BE SCRATCHED ON THE INSIDE SURFACE, WE'RE NOT SURE HOW THAT HAPPENED. THE METAL INSIDE THE MOUNTING THREADS IS VERY SLIGHTLY BENT BUT THIS DOES NOT INTERFERE WITH MOUNTING (BOTTOM LEFT CORNER OF PICTURE 4). THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: WE ARE NOT ABLE TO TEST THIS LENS. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) LEITZ 3.2X OBJECTIVE SPECIFICATIONS: MANUFACTURER: LEITZ WETZLAR OBJECTIVE LENS MAGNIFICATION: 3.2X INFINITY CORRECTED FOR USE WITHOUT COVER SLIP N.A.: 0.06 PLAN OPTICS RMS THREAD

[THERMO SCIENTIFIC SV50517.12] HYPERFORMA MIXTAINER 100 LITER CONICAL DRUM WHITE. MANUFACTURER: THERMO SCIENTIFIC MODEL: SV50517.12 CONICAL DRUM CAPACITY: 100 LITERS SERIES: HYPERFORMA MIXTAINER COLOR: WHITE DIMENSIONS: 60 X 76 CM BOTTOM PORT: 10.2 CM, 4" APPLICATIONS: HYDRATION OF POWDERED MEDIA AND BUFFERS, STERILE MIXING OF CELL CULTURE MEDIA WITH SERA AND REAGENTS STERILE MIXING OF BUFFER SOLUTIONS OR OTHER PROCESS FLUIDS, POOLING OF STERILE LIQUID FRACTIONS

EXFO S1000 OMNICURE UV/VISIBLE SPOT CURING SYSTEM UV/VISIBLE 100W INDUSTRIAL CURING SYSTEM LAMP TYPE: HIGH-PRESSURE 100W MERCURY VAPOR SHORT ARC POWER: 100-120VAC/200-240VAC, 50/60HZ FILTERS: 320-500NM STANDARD (INSTALLED) DIMENSIONS: 13.3" X 7.9" X 7.1" WARM-UP: 90 SECONDS UNIT POWERS ON BUT NEEDS REPAIRS. FOR PARTS OR NOT WORKING. SOLD AS/IS FOR PARTS OR REPAIR.

[AGILENT 6672A] SYSTEM DC POWER SUPPLY 0-20V 0-100A OUTPUT, 230VAC INPUT (UGLY) MANUFACTURER: AGILENT TECHNOLOGIES MODEL: 6672A CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THIS SUPPLY IS IN FAIR COSMETIC CONDITION WITH SOME PRETTY BIG COSMETIC BLEMISHES. THERE IS A SERIES OF DENTS AND DINGS AROUND THE EDGES OF THE FRONT PANEL, AND THE RIGHT SIDE OF THE FRONT IS BROKEN, SO THE FRONT IS NOT HELD ON AS SECURELY AS IT USED TO BE BUT IT STILL STAYS IN PLACE. THERE IS A LARGE DENT ON THE LEFT SIDE, AS WELL AS A FEW SMALLER FINGERTIP-SIZED DENTS IN THE METAL TOP COVER. THE CLIPS OVER SOME OF THE HANDLE SCREWS ARE BROKEN. THE REAR PANEL OUTPUT TERMINAL COVER IS MISSING A SCREW, AND HAS BEEN CUT TO ALLOW LARGER CABLES THROUGH THE COVER. THIS UNIT HAS NO FEET AND NO RACK MOUNTING TABS. THE SERIAL NUMBER STICKER SAYS HP, THE FRONT BADGE SAYS AGILENT; WE THINK THIS UNIT MAY HAVE BEEN PRODUCED DURING THE TRANSITION FROM HEWLETT PACKARD TO AGILENT BRANDING. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS SUPPLY IS IN GOOD WORKING CONDITION. OUR LOAD CAN ONLY TAKE ABOUT 70A BUT THIS SUPPLY GAVE THAT MUCH AT 20V WITH NO DIFFICULTY. WE USED A PIECE OF HEAVY GAUGE WIRE AS A SHORT AND THIS SUPPLY GAVE 100 AMPS AT ABOUT 25MV! THE KNOBS AND BUTTONS RESPOND TO USER INPUT AS EXPECTED. THE DISPLAY IS CLEAR AND EASY TO READ. NO OTHER TESTING WAS DONE. PLEASE NOTE: THIS SUPPLY WILL NOT OPERATE ON 120VAC INPUT POWER! NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) AGILENT 6672A POWER SUPPLY SPECIFICATIONS: MANUFACTURER: AGILENT MODEL: 6672A SYSTEM DC POWER SUPPLY POWER OUTPUT: 2KW ADJUSTABLE VOLTAGE OUTPUT: 0 TO 20V DC ADJUSTABLE CURRENT LIMIT: 0 TO 100A REAL-TIME VOLTAGE AND CURRENT OUTPUT DISPLAYS PROGRAMMABLE VOLTAGE AND CURRENT MAXIMUM LIMITS FRONT PANEL KNOB AND BUTTON CONTROLS FAST, LOW-NOISE OUTPUTS ANALOG CONTROL OF OUTPUT VOLTAGE AND CURRENT DYNAMIC FAN SPEED MINIMIZES ACOUSTIC NOISE GPIB COMMUNICATIONS REMOTE SENSE CAPABLE OUTPUT TERMINALS CAN BE FLOATED TO +/-240VDC FROM CHASSIS GROUND INPUT POWER: 220/240V AC 1PHASE 50/60HZ 19A MAXIMUM S/N: HP

[USED] PARR 3911 HYDROGENATION APPARATUS S/N: 4735. COMES IN NON-ORIGINAL PACKAGING. IT HAS SCUFFS AND SCRATCHES FROM NORMAL USE. NOTES: WHEN POWER WAS APPLIED, THIS ITEM RAN VERY SMOOTHLY. IT WAS NOT TESTED UNDER A LOAD. THE TANK WAS NOT TESTED SINCE IT DOES NOT COME EQUIPPED WITH GAUGES. NO FURTHER TESTING WAS PERFORMED. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. SPECIFICATIONS: MANUFACTURER: PARR PRESSURE REACTOR: CAT. #: 3911 SN: 4735 115VAC 60 HZ BOTTLE: MANUFACTURER: PARR 66CA CAPACITY: 500 ML TESTED TO 120 PSIG MOTOR: MANUFACTURER: WESTINGHOUSE 1/6 HP 60 HZ TYPE: FH INS: A FR: 48 1725 RPM 115VAC SINGLE PHASE HSG: OPEN 56LBS - 25IN X 25IN X 18IN

[BELTONE] [MODEL 119] AUDIOMETER -10 - 110 DB 125-8000 HZ S/N: X43H028

[STRAIN GAUGE] COOPER INSTRUMENTS & SYSTEMS DFI 3701-2 X5 STRAIN GAUGE RANGE 0-50 LBS 5VDC 2-CHANNEL 4-ALARM

[PLATO SP-600T] SOLDER POT 1000W ADJUSTABLE 6" X 4" X 4" MANUFACTURER: PLATO MODEL: SP-600T CONDITION: USED. THIS SOLDER POT IS IN GOOD COSMETIC CONDITION WITH ONLY MINOR SCUFFS AND SCRATCHES FROM REGULAR COMMERCIAL USE AND COMES IN NON-ORIGINAL PACKAGING. THE HANDLES ON EITHER SIDE OF THE HEAT SHIELD ARE MISSING AND NOT INCLUDED. THE LCD TEMPERATURE READOUT IS BROKEN. THE FIRST AND LAST DIGITS ARE READABLE BUT THE MIDDLE DIGIT IS NOT WORKING PROPERLY. TWO OF THE FEET ARE STRAIGHT AND TRUE WHILE THE OTHER TWO FEET ARE SLIGHTLY BENT AND FOR THIS REASON, DO NOT FULLY SCREW INTO THE LOWEST SETTING. THERE IS A SMALL DENT IN THE FRONT SAFETY SHIELD ENCLOSURE JUST ABOVE THE PLATO LOGO. THE EDGE OF THE CRUCIBLE IS CLEAN AND OVERALL THE POT LOOKS GOOD. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: WE POWERED ON THIS SOLDER POT TO OBSERVE THE POWER INDICATOR AND THE LED DISPLAY IGNITE. THE LCD IS NOT WORKING PROPERLY. THE FIRST AND LAST DIGITS ARE READABLE BUT THE MIDDLE DISPLAY IS NOT. YOU COULD GET A GENERAL IDEA OF THE TEMPERATURE W/O KNOWING THE MIDDLE DIGIT BUT OVERALL WE HAVE TO SAY THAT IT IS NOT CURRENTLY FUNCTIONING AS IT SHOULD. WE COULD HOLD DOWN THE PRESET TEMPERATURE BUTTON AND ADJUST THE SETTING WITH THE KNOB, BUT THE LCD IS NOT FUNCTIONING PROPERLY WHICH CAUSES SOME PROBLEMS DEFINING THE EXACT PRESET. THE MANUAL TEMPERATURE KNOB IS FUNCTIONAL AND ALLOWS A LARGE RANGE OF TEMPERATURES FROM LOW TO HIGH. THIS SOLDER POT CAME TO US FULL OF SOLDER IN THE CRUCIBLE. WE MANUALLY SET THE TEMPERATURE TO HIGH AND ALLOWED THE POT TO HEAT UP. WITHIN 30 MINUTES THE SOLDER HAD MELTED AND BECOME MOLTEN. WE REMOVED MOST OF THE SOLDER FROM THE POT TO REDUCE THE SHIPPING WEIGHT. NO ADDITIONAL TESTING WAS PERFORMED. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) PLATO SP-600T ADJUSTABLE SOLDER POT 115VAC 1000W 6"X4"X4" PORCELAIN CRUCIBLE SPECIFICATIONS: MANUFACTURER: PLATO MODEL: SP-600T DESCRIPTION: SOLDER POT 115VAC 60HZ 1000W 6" X 4" X 4" LARGE CAPACITY PORCELAIN CRUCIBLE 32 LB. SOLDER CAPACITY SAFETY HEAT SHIELD LCD DISPLAY SKU: Y29H017 2F-02-03(1) 52LBS - 20IN X 20IN X 17IN

TEKTRONIX TLA7016 6-SLOT BENCHTOP LOGIC ANALYZER MAINFRAME WITH INTERFACE MODULE - MANUFACTURER: TEKTRONIX MODEL: TLA7016 LOGIC ANALYZER FRAME BENCHTOP MAINFRAME ACCEPTS UP TO 6 TLA MODULES FIRMWARE FW 5.2.316 INTERFACE MODULE: 650-4733-50, APPLICATION S/W V5.0 HOURS METER: 50630 54LBS - 36IN X 25IN X 19IN

ENPLAS PLCC-28-1.27-30 OPEN-TOP PLCC28 TEST & BURN-IN SOCKETS - MANUFACTURER: ENPLAS MODEL: PLCC-28-1.27-30 CONDITION: NEW OTHER. COMES IN NON-ORIGINAL PACKAGING. THESE TEST SOCKETS ARE BRAND NEW AND HAVE BEEN REPACKAGED WITH ESD FOAM INSIDE OF AN ESD BAG. NOTES: NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (4) ENPLAS PLCC-28-1.27-30 OPEN-TOP PLCC28 TEST SOCKETS SPECIFICATIONS: MANUFACTURER: ENPLAS PART #: PLCC-28-1.27-30 SOCKET TYPE: PLCC (OPEN-TOP) LEAD COUNT: 28 PITCH: 1.27 MM MAX. ACTUATION FORCE: 1.5KG DIMENSIONS: LENGTH: 22.35 MM WIDTH: 22.35 MM HEIGHT: 15.3 MM LEAD LENGTH: 3.0 MM

(1) BODINE ARC KEEPER AK175PRB PAK10001 HIGH INTENSITY DISCHARGE LAMP BACKUP BALLAST (1) INSTALLATION KIT (1) INSTRUCTION & INSTALLATION MANUAL SPECIFICATIONS: MANUFACTURER: BODINE MODEL: AK175PRB PAK10001 ARC KEEPER BACKUP BALLAST INPUT: 120 VAC, 600 MA, 6.0 W, 50/60 HZ OR 277 VAC, 800 MA, 10.0 W, 50/60 HZ AMBIENT TEMPERATURE: 0C MIN. TO 55C MAX. (32F TO 131F) BATTERY: 7.2V 2500MAH CHARGING CURRENT: 167MA MOUNTABLE SKU: O15Y013 1E-15-04(8) 9LBS - 22IN X 15IN X 7IN

HEWLETT PACKARD 33120A 15MHZ FUNCTION/ARBITRARY WAVEFORM GENERATOR FUNKY OUTPUT - PARTS. THIS GENERATOR IS IN FAIR COSMETIC CONDITION, WITH LOTS OF SCUFFS/SCRATCHES, RESIDUES AND ADHESIVE LABEL RESIDUES HERE AND THERE ALL OVER. THE BOTTOM REAR SCREW IS MISSING. THE POWER BUTTON IS TWISTED. THERE IS A REJECTED NOTE FROM A TEKTRONIX SERVIC FACILITY, DECLARING A FUNCTIONAL FAILURE. THIS GENERATOR IS IN PARTIAL WORKING CONDITION. WE WERE ABLE TO GET A SIGNAL OUT, BUT THE WAVEFORM WAS A JAGGED SQUARE WAVE NO MATTER WHICH WAVEFORM WAS SELECTED. IT IS NOT ABLE TO GIVE OTHER KINDS OF OUTPUTS. THE POWER BUTTON STICKS, WHEN PUSHED TO POWER ON OR OFF. THE DISPLAY IS BRIGHT AND CLEAR. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1)A WAVEFORM GENERATOR SPECIFICATIONS: FUNCTION/ARBITRARY WAVEFORM GENERATOR FREQUENCY RANGE TO 15MHZ AMPLITUDE: 50MVPP TO 10VPP OUTPUT IMPEDANCE: 50 OHMS GPIB (IEEE_488) AND RS-232 INTERFACES POWER: 100/120/220/240V (SWITCH SELECTABLE) 45-66HZ AND 360 TO 440HZ (AUTOMATICALLY SENSED) 50VA

[4] AEROFLEX INMET 6AH-06 ATTENUATORS 6DB 2W FIXED DC TO 6GHZ SMA TO SMA. MANUFACTURER: AEROFLEX INMET MODEL: 6AH-06 CONDITION: NEW OTHER. THESE ATTENUATORS ARE IN A NEW AND UNUSED COSMETIC CONDITION AND COME IN THE ORIGINAL OPEN AEROFLEX SEALABLE PLASTIC PACKAGING THAT ORIGINALLY CONTAINED 6, BUT NOW CONTAINS 4 ITEMS. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (4) AEROFLEX INMET 6AH-06 ATTENUATORS SPECIFICATIONS: MANUFACTURER: AEROFLEX INMET MODEL: 6AH-06 DESCRIPTION: ATTENUATORS 6DB 2W FIXED DC TO 6GHZ SMA TO SMA HEX SKU: Y09H022 2A-06-02(1) 0LBS - 6IN X 6IN X 4IN

WINWAY TECH 10102019570 TEST SOCKET BGA35X35-M34X34-1.00. MANUFACTURER: WINWAY TECH MODEL: MAINFRAME: 10102019570 SOCKET: 10101023770 DESCRIPTION: TEST SOCKET SIZE: BGA35X35-M34X34-1.00 SKU: Y11U002 1A-02-05-04(2) 2LBS - 6IN X 6IN X 4IN

[AMERICAN ORTHODONTICS 853-240] DENTAL WIRE PACKS 50/PK (LOT OF 5) NEW AMERICAN ORTHODONTICS 853-240 0.020" UP DENTAL WIRE PACKS 50/PK SPECIFICATIONS: MANUFACTURER: AMERICAN ORTHODONTICS MODEL: 853-240 DENTAL ARCHWIRE PACK MATERIAL: STAINLESS STEEL CONFIGURATION: UPPER SIZE: 0.020" 50 WIRES PER PACKAGE N.A. FORM I-ROUND CONTAINS NICKEL AND/OR CHROMIUM SKU: W43B006 1A-04-03-03(3)

AMRAY 1830T4 SCANNING ELECTRON MICROSCOPE W/ IXRF SDD3310 SILICON DRIFT DETECTOR - MANUFACTURER: AMRAY MODEL: 1830T4 CONDITION: USED. THIS SYSTEM IS IN FAIR COSMETIC CONDITION WITH LOTS OF MINOR/NORMAL WEAR FROM PRIOR USE. THE SDD UNIT IS MUCH NEWER THAN THE REST (FROM 2017) SEVERAL SIDE PANELS ON THE CONSOLE AND MICROSCOPE BASES ARE LOOSE BUT THEY STAY IN PLACE. ASIDE FROM A FEW SEALED APERTURE DISKS, WE ARE NOT ABLE TO TELL WHICH OF THE INCLUDED ACCESSORIES ARE NEW OR GOOD-USED SPARES. SEVERAL OF THE FILAMENTS LOOK NEW, SEVERAL ARE VISIBLY DARK FROM USE, AND AT LEAST A COUPLE HAS VISIBLE DAMAGE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS SYSTEM WAS IN ACTIVE USE UNTIL A FORMER AMRAY TECHNICIAN DE-INSTALLED IT PROPERLY. WE WERE ABLE TO SEE THE FORMER OWNERS RUNNING VARIOUS STUDIES WITH THIS SYSTEM (SEE PHOTO #3). NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) AMRAY 1830T4 SCANNING ELECTRON MICROSCOPE, UNIT 1 (CONSOLE, KEYBOARD) (1) AMRAY 1830T4 SCANNING ELECTRON MICROSCOPE, UNIT 2 (COLUMN, WITH VACUUM PUMP BENEATH) (1) AMRAY TRIODE ION PUMP POWER SUPPLY (1) AMRAY 90266D AUXILIARY PREAMPLIFIER (1) AMRAY STAGE MOTOR CONTROL (1) IXRF SYSTEMS 550I INTERFACE (1) IXRF SYSTEMS SDD3310 SILICON DRIFT DETECTOR (1) EDS DETECTOR POWER BOX (1) PFEIFFER BALZERS TPH240 TURBOMOLECULAR VACUUM PUMP (1) EDWARDS E2M8 HIGH VACUUM MECHANICAL ROUGHING PUMP (1) DELL OPTIPLEX 9020 PC WITH MOUSE, KEYBOARD, MONITORS (1) USB KEY/DONGLE TO RUN THE SEM SOFWARE (1) USB DRIVE WITH SEM SOFTWARE SPARE PARTS IN UNKNOWN CONDITION: (1) AMRAY PC10M CIRCUIT BOARD WITH 92101-01 DAUGHTER CARD (1) AMRAY UVACOS VACUUM CONTROL SYSTEM CARD (1) AMRAY UVACOS POWER PANEL (30) FILAMENTS (25) APERTURE DISKS, VARIOUS SIZES 100, 200, 300 UM, PT-IR AND MOLYBDENUM (6) SAMPLE HOLDERS (2) BRASS TELESCOPING STAGE ADJUSTMENT ARMS SPECIFICATIONS: MANUFACTURER: AMRAY, INC. MODEL: 1830 T4 SCANNING ELECTRON MICROSCOPE COMPUTER-CONTROLLED DIGITAL IMAGING INTERNAL DIMENSIONS: 13 X 13 X 13.5 INCHES (ALLOWS EXAMINATION OF EXTREMELY LARGE SPECIMENS) FRONT DOOR OPENING IS 11.5 X 9.8" TURBOMOLECULAR AND MECHANICAL PUMPS INCLUDED LOTS OF SPARE FILAMENTS AND APERTURES INCLUDED POWER: 117V 60HZ 17A (MAY REQUIRE EXTERNAL POWER CONDITIONER) IXRF SYSTEMS, INC. SDD3310 SILICON DRIFT DETECTOR ELECTRONICALLY COOLED, LN2 FREE EDS, SEM MOUNTED WITH SLIDE ASSEMBLY INTERFACE: IXRF 550I SOFTWARE: IRIDIUM ULTRA ON WINDOWS PC

[139] BECTON DICKINSON 351005 FALCON OPTILUX DISPOSABLE PETRI DISH MANUFACTURER: BECTON DICKINSON MODEL: 351005 DESCRIPTION: FALCON OPTILUX DISPOSABLE PETRI DISH FLAT BOTTOM SURFACE FOR DISTORTION-FREE OPTICS DIMENSIONS: DIAMETER: 100MM HEIGHT: 20MM MATERIAL: CRYSTAL-GRADE POLYSTYRENE DISPOSABLE STERILE SKU: X06G003 2H-02-04(1) 13LBS - 22IN X 15IN X 15IN

[NEW] JBC TOOLS MS-9001 ADVANCED MULTI-TOOL SOLDERING IRON DIGITAL MONITOR 9001000 - MANUFACTURER: JBC TOOLS MODEL: MS-9001 CONDITION: NEW OTHER. COMES IN FACTORY ORIGINAL PACKAGING. NOTES: NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) JBC TOOLS MS-9001 ADVANCED DIGITAL MONITOR SPECIFICATIONS: MANUFACTURER: JBC ADVANCED MODEL: MS-9001 PART #: 9001000 DESCRIPTION: DIGITAL MONITOR WEIGHT: 1.70 LBS. SKU: P28P002 1D-06-04(1) 4LBS - 12IN X 12IN X 7IN

[YAMAICHI IC51-0444-400] TEST/BURN-IN IC CLAMSHELL SOCKET W/ PLCC44 CONTACTOR PLCC - MANUFACTURER: YAMAICHI MODEL: IC51-0444-400 CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THIS TEST SOCKET AND CONTACTOR IS IN GREAT CONDITION WITH A FEW MINOR SCUFFS AND SCRATCHES FROM NORMAL USE, BUT NOTHING MAJOR OR ANYTHING THAT WOULD AFFECT FUNCTION. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS TEST SOCKET AND CONTACTOR WERE PULLED FROM A WORKING SETUP THAT WAS BEING DECOMMISSIONED, BUT WAS NOT TESTED SEPARATELY AFTER REMOVAL. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) YAMAICHI IC51-0444-400 TEST/BURN-IN IC CLAMSHELL SOCKET W/ CONTACTOR SPECIFICATIONS: MANUFACTURER: YAMAICHI MODEL: IC51-0444-400 DESCRIPTION: BURN-IN/TEST SOCKET W/ CONTACTOR PRODUCT TYPE: PLCC (PLASTIC LEADED CHIP CARRIER) BODY TYPE: CLAMSHELL # OF CONTACTS: 44-PINS PITCH: 1.27 MM BODY SIZE: 40MM X 34MM TOTAL WEIGHT: 0.10 LBS. SKU: P35P020 1B-16-02(1)

GGB INDUSTRIES MCW-24-8474-2 MULTI-CONTACT WEDGE PROBE PICOPROBE FOR MMIC OR MODULE PROBING INDIVIDUALLY SPRING-LOADED CONTACTS. SPECIFICATIONS: MANUFACTURER: GGB INDUSTRIES MODEL: MCW-24-8474-2 DESCRIPTION: MULTI-CONTACT WEDGE PROBE PICOPROBE FOR MMIC OR MODULE PROBING INDIVIDUALLY SPRING-LOADED CONTACTS. SKU: U29H003 2B-01-02(2) 2LBS - 8IN X 8IN X 4IN

2021 AGILENT DSO81204B 12GHZ 4 CHAN. PASSES SELF TESTS, CHAN2 TRIGGER FAILS CAL-PARTS - MANUFACTURER: AGILENT MODEL: DSO81204B CONDITION: FOR PARTS OR NOT WORKING. COMES IN NON-ORIGINAL PACKAGING. THIS SCOPE IS IN FAIR COSMETIC CONDITION WITH SOME BLEMISHES FROM PRIOR USE. THERE ARE A FEW SMALL, HEAVY SCRATCHES ON THE DISPLAY; THE WORST IS NEAR THE LEFT SIDE, BY SOME SCRATCHES ON THE FRONT OF THE FRAME, SEE PHOTO #6 TOP/RIGHT. THERE ARE SEVERAL CORNERS WITH SCUFFS FROM BUMPING OR RUBBING HARD. THE BACK OF THE TOP BY THE POWER INPUT HAS A BIG DENT. THIS CAME TO US WITH A REJECTED STICKER FROM A CALIBRATION LAB, STATING THEY "COULD NOT CALIBRATE DUE TO BEING NON-OPERATIONAL." THE STICKER ON THE FRONT FROM TEKTRONIX CALIBRATION IN 2021 READS "CH2 FAILS TRIGGER HYSTERESIS ALL ELSE CAL'D" THE CALIBRATION STATUS IN THE SCOPE SAYS "UNCALIBRATED" AND "FAILED" ON CHANNEL 2 TRIGGER STATUS. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS SCOPE IS IN PARTIAL WORKING CONDITION. THE CMOS BATTERY IS DEAD, WHICH PREVENTS THE UNIT FROM LOADING WINDOWS. A KEYBOARD MUST BE USED TO GET PAST THE "F1 TO CONTINUE OR DEL TO ENTER SETUP" SCREEN, AND RESET THE DATE IF THE UNIT IS UNPLUGGED. ONCE THE SCOPE BOOTS, IT IS ABLE TO DISPLAY SIGNALS TO 12GHZ ON EACH CHANNEL, AS WELL AS AUTOSCALE ON ALL FOUR CHANNELS UP TO 6GHZ. USING THE SAME CABLE WITH THE SAME SIGNAL ON EACH CHANNEL INDIVIDUALLY, VERTICAL MEASUREMENTS OF WAVEFORMS WERE DRAMATICALLY DIFFERENT AT HIGHER FREQUENCY. AT 3GHZ THE MEASUREMENTS WERE WITHIN ABOUT 5% OF EACH OTHER. MEASUREMENTS VARIED BY UP TO 20% AT 12GHZ! THIS UNIT NEEDS CALIBRATION, AT LEAST, IF NOT SOME KIND OF REPAIR. ALTHOUGH EACH CHANNEL WAS ABLE TO DISPLAY SIGNALS AT 12GHZ, NO CHANNELS ARE ABLE TO AUTOSCALE AND FIND A SIGNAL AT 12GHZ, THEY MUST BE TUNED MANUALLY THERE. THE DISPLAY IS CLEAR AND BRIGHT, AND THE TOUCH SCREEN WORKS. KEYBOARD TESTS PASS. SELF-TESTS PASS. THE LEDS ALL LIGHT UP, BUT THEY LIGHT UP SURPRISINGLY DIM. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) AGILENT DSO81204B INFINIIUM HIGH PERFORMANCE DIGITAL STORAGE OSCILLOSCOPE SPECIFICATIONS: MANUFACTURER: AGILENT TECHNOLOGIES MODEL: DSO81204B INFINIIUM HIGH PERFORMANCE DIGITAL STORAGE OSCILLOSCOPE ITEM: DSO81204B-CFG001 BANDWIDTH: TO 12 GHZ SAMPLING: TO 40GSA/S 4 CHANNELS XGA COLOR LCD DISPLAY GPIB INTERFACE INSTALLED OPTIONS: EXT REF CLK OPERATING SYSTEM: WINDOWS XP POWER REQUIREMENT: 100-240V 47-63HZ 550W SOLD AS-IS, PLEASE READ TESTING NOTES! SKU: Y08D012 3B-07-03(1) 36LBS - 25IN X 25IN X 7IN

SUTTER INSTRUMENT LAMBDA SC SMARTSHUTTER PROGRAMMABLE SHUTTER CONTROLLER - MANUFACTURER: SUTTER INSTRUMENT MODEL: SC CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THIS CONTROLLER IS IN FAIR COSMETIC CONDITION WITH ONLY MINOR BLEMISHES FROM PRIOR USE (SCUFFS/SCRATCHES). COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: THIS CONTROLLER WAS CONNECTED TO A WORKING SMARTSHUTTER AND IT WAS ABLE TO OPEN/CLOSE THE SHUTTER USING THE OPEN/CLOSED SWITCH. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) SUTTER LAMBDA SC SMARTSHUTTER CONTROLLER SPECIFICATIONS: MANUFACTURER: SUTTER INSTRUMENT MODEL: LB-SC LAMBDA SC SMARTSHUTTER CONTROLLER MICROPROCESSOR CONTROLLED SHUTTER DRIVER FOR SMART SHUTTER CONTROL DIRECTLY WITH OPEN/CLOSED SWITCH CONTROL REMOTELY WITH A COMPUTER THROUGH USB CONTROL USING LOGIC LEVEL INPUT DELAY AND EXPOSURE INTERVALS CAN BE SET FOR UP TO 5 HOURS WITH MILLISECOND RESOLUTION RUN CONTINUOUSLY OR LOOP A SPECIFIC NUMBER OF CYCLES EACH MOTION CAN BE OPTIMIZED FOR SPEED AND SMOOTHNESS VARIABLE-OPENING NEUTRAL DENSITY MODE HAS 144 STEPS OF OUTPUT SKU: V32D009 1C-02-03(3) 2LBS - 10IN X 10IN X 6IN

[COLE-PARMER 11214-16] ALUMINUM DISHES FOR BALANCES (50) - MANUFACTURER: COLE-PARMER MODEL: 11214-16 CONDITION: NEW. THE DISHES COME IN ORIGINAL PACKAGING. NOTES: NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) BOX OF (50) COLE-PARMER 11214-16 ALUMINUM DISHES DISPOSABLE SPECIFICATIONS: MANUFACTURER: COLE-PARMER MODEL: 11214-16 DESCRIPTION: ALUMINUM DISHES, DISPOSABLE FOR BALANCES & SCALES DIAMETER: 10CM 50 PER BOX SKU: V21O008 1B-14-04(6) 0LBS - 8IN X 8IN X 4IN

QOSINA 11029 RED HDPE MEDICAL SLIDE CLAMPS 0.315" OD TUBING (5,000) MANUFACTURER: QOSINA MODEL: 11029 MEDICAL SLIDE CLAMPS MATERIAL: HDPE HIGH DENSITY POLYETHYLENE SIZE: FITS 0.315" OUTER DIAMETER TUBING (8MM) COLOR: RED UNIT DIMENSIONS: 1.89" LENGTH X 0.83" WIDTH X 0.15" THICKNESS

[UNBRANDED] LABORATORY FREEZER RACKS 28.25" X 5.75" X 5" 12-SPACE VERTICAL LABORATORY FREEZER RACKS (2) ORIENTATION: VERTICAL HEIGHT: 28.25" WIDTH: 5.75" DEPTH: 5" MATERIAL: STAINLESS STEEL DOUBLE HANDLE DESIGN

[MVE LAB-10 10 LITER LIQUID NITROGEN STORAGE DEWAR W/POURING SPOUT NO CAP] MANUFACTURER: MVE CRYOGENICS MODEL: LAB-10 LIQUID NITROGEN STORAGE DEWAR CONSTRUCTION: ALUMINUM CAPACITY: 10 LITERS INCLUDES POURING SPOUT OPENING DIAMETER: 2.0" BODY DIAMETER: 10" TOTAL HEIGHT: 21.5" NOT INCLUDING POURING SPOUT

[HAMAMATSU LC-L5] UV-LED LIGHT SOURCE CURING LAMP L11403-1104 C11615. MANUFACTURER: HAMAMATSU MODEL: LC-L5. USED. COMES IN NON-ORIGINAL PACKAGING. THIS LOT IS IN GOOD COSMETIC CONDITION WITH ONLY MINOR BLEMISHES FROM PRIOR USE INCLUDING SOME SCRATCHES THAT ARE NOT EASY TO SEE IN THE PHOTOS. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: THIS LIGHT SOURCE IS IN GOOD WORKING CONDITION. WE GAVE THIS A QUICK CHECK TO BE SURE IT STILL LIGHTS UP AND THEN REMOVED IT FROM A DECOMMISSIONED PROTOTYPE SYSTEM. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) HAMAMATSU L11403-1104 LIGHT SOURCE (1) HAMAMATSU C11615 POWER SUPPLY (2) CABLES. SPECIFICATIONS: MANUFACTURER: HAMAMATSU MODEL: LC-L5 ULTRAVIOLET LED LIGHT SOURCE IDEAL FOR UV DRYING AND CURING APPLICATIONS AS WELL AS INSPECTION AND FLUORESCENCE EXCITATION REQUIRES NO DUCT OR CHILLER INSTALLATIONS UP TO 90% SMALLER THAN TRADITIONAL LAMP-BASED CURING LIGHTS CONSUMES AS LITTLE AS 1/30TH AS MUCH POWER AS ORDINARY UV LAMPS LED SERVICE LIFE RATING: 20,000 HRS MODULAR CABLES FOR EASY INSTALLATION LIGHT SOURCE MODEL: L11403-1104 ILLUMINATION AREA: 10X105 MM UV IRRADIATION INTENSITY RATING: 1000 MW/CM2 PEAK WAVELENGTH: 365 NM FORCED-AIR COOLING POWER: 36VDC 5A POWER SUPPLY MODEL: C11615 INPUT: 100-240V 50-60HZ 800VA. SKU: U49D002 1E-08-03(5) 13LBS - 18IN X 12IN X 12IN

[SIEVERS TOC 800 ANALYZER] PORTABLE TOTAL ORGANIC CARBON ANALYZER MONITOR WATER SAMPLES FROM HIGH PURITY <0.5PPB TO 50PPM TOC POWER: 110V 60HZ. INCLUDES (2) SIEVERS TOC 800 ANALYZERS AND (2) SIEVERS ICR INORGANIC CARBON REMOVAL UNITS (2) SIEVERS ICR 800 INORGANIC CARBON REMOVAL UNITS. CONDITION: FOR PARTS OR NOT WORKING. VISIBLE CORROSION INSIDE AND OUT. BOTH TOC UNITS HAVE SOMETHING MISSING INSIDE, WITH LOOSE CONNECTORS AND CIRCUIT BOARDS. BOTH TOCS ARE MISSING THEIR PUMPS. SEVERAL COVER SCREWS ARE MISSING FROM THE INORGANIC CARBON REMOVAL UNITS. SEVERAL OF THE PLASTIC FEET ARE DEGRADED/MELTING AND LEAVE RESIDUE WHEREVER THEY TOUCH. UNIT IS NOT WORKING. NO TESTING WAS PERFORMED AS THESE ARE VISIBLY INCOMPLETE WITH DANGLING WIRES INSIDE.

[OMEGA RH71 OMEGA DIGITAL HYGRO-THERMOMETER] TYPE: DIGITAL HYGRO-THERMOMETER FUNCTIONS: TEMPERATURE (-20 TO 80 C) RELATIVE HUMIDITY (RH) (5 TO 95%) DEWPOINT (-50 TO 80 C) C / F SWITCHABLE: YES (1) OMEGA PROBE (1) USER MANUAL (1) CARRYING CASE

[PERKIN ELMER CETUS DNA THERMAL CYCLER] FOR AUTOMATED PCR TESTING 48-WELL - MANUFACTURER: PERKIN ELMER MODEL: DNA THERMAL CYCLER CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THIS CYCLER IS IN FAIR OVERALL COSMETIC CONDITION. THERE ARE SCUFFS/SCRATCHES/STAINS FROM PRIOR USE ALL OVER, BUT NOT BAD. THERE IS A BIT OF ALUMINUM FOIL TAPED INSIDE THE LID. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS UNIT IS IN GOOD WORKING CONDITION. WE CLICKED THE APPROPRIATE BUTTONS TO CONFIRM THE PREVIOUS OWNER'S PROTOCOL AND TOLD IT TO START. THE CYCLER WENT THROUGH THE VARIOUS SETPOINTS FROM 37 TO 94 DEGREES WITHOUT ANY DIFFICULTY. AT THE END OF THE PROGRAMMED NUMBER OF CYCLES, IT DISPLAYED A THERMO-CYCLE SHUT OFF MESSAGE. HEATING AND COOLING WERE SURPRISINGLY QUICK. OPERATION IS FAIRLY QUIET EVEN DURING COOLING OPERATIONS. THE DISPLAY IS CLEAR AND BRIGHT. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) PERKIN ELMER CETUS DNA THERMAL CYCLER SPECIFICATIONS: MANUFACTURER: PERKINELMER CETUS DNA THERMAL CYCLER VERSION 2.2 48-POSITION ALUMINUM SAMPLE HOLDER BLOCK FLEXIBLE TEMPERATURE PROGRAMMING RAPID HEATING AND COOLING AUTOMATES TEMPERATURE CYCLING FOR PCR REACTION PARAMETERS PROGRAMMABLE MICROCONTROLLER SERIAL COMMUNICATIONS SKU: U51D006 3A-10-02(1) 60LBS - 25IN X 19IN X 16IN

[MARTRONICS MARK 440] STENCIL MAKER U.V. DURA-FILM STENCIL MAKER KIT STENCILS UP TO 4" X 6". INCLUDES: (1) MARTRONICS MARK 440 U.V. DURA-FILM STENCIL MAKER KIT (1) UV EXPOSURE UNIT IN ALUMINUM FRAME (1) ALUMINUM EXPOSURE TRAY WITH COMPRESSION FOAM AND GLASS TOP (1) 16OZ. BOTTLE STENCIL DEVELOPER (1) DIGITAL TIMER (1) PACKET OF STENCIL NEUTRALIZER CLEANER (1) ACTIVATOR BOTTLE (2) WHITE DEVELOPER SPONGES (10) UNEXPOSED UNIVERSAL STENCILS 5"X6" (2) SAMPLES OF UNIVERSAL STENCILS FOR PRACTICE (5) SHEETS TRANSPARENCY FILM FOR YOUR COPY. SPECIFICATIONS: STENCIL MAKER 110 VOLT CONFIGURATION MAKES STENCILS UP TO 4 X 6" ALUMINUM FRAME DIMENSIONS: LENGTH: 5" WIDTH: 6" HEIGHT: 12" TRANSPARENCY FILM SIZE: (8 1/2"X 11") USES: METAL PRODUCTS & GLASS.

BECTON DICKINSON 351005 FALCON OPTILUX DISPOSABLE PETRI DISH (200) - MANUFACTURER: BECTON DICKINSON MODEL: 351005 CONDITION: NEW. COMES IN ORIGINAL PACKAGING. THIS ITEM IS IN NEW AND UNUSED CONDITION. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (200) BECTON DICKINSON 351005 FALCON OPTILUX DISPOSABLE PETRI DISH SPECIFICATIONS: MANUFACTURER: BECTON DICKINSON MODEL: 351005 DESCRIPTION: FALCON OPTILUX DISPOSABLE PETRI DISH FLAT BOTTOM SURFACE FOR DISTORTION-FREE OPTICS DIMENSIONS: DIAMETER: 100MM HEIGHT: 20MM MATERIAL: CRYSTAL-GRADE POLYSTYRENE DISPOSABLE STERILE

[BAE SYSTEMS SCIMOS2051F SCIMOS-2051 5.5MP MICROSCOPE CAMERA] S/N: *1140-1067* SCIMOS-2051-F 5.5 MEGAPIXEL CMOS/SCMOS MICROSCOPE CAMERA TRIG SYNC CAMLINK-1 CAMLINK-2 PWR: 5VDC EXTREMELY LOW NOISE READOUT TO PRESERVE SIGNALS HIGH EFFICIENCY OF LIGHT COLLECTION AND CONVERSION WITH (4) CAMERA LINK 30V SPACE SHUTTLE-C CAMLINK CABLES

[LEICA] PL FLUOTAR 20X/0.45 D MICROSCOPE OBJECTIVE LENS DM SERIES GERMANY SPECIFICATIONS: MANUFACTURER: LEICA PART NO: 768009 MODEL NO: PL FLUOTAR DM SERIES DESCRIPTION: MICROSCOPE OBJECTIVE LENS 20X/0.45 D /0 32MM THREAD /M32 MADE IN GERMANY SKU: X28S032 1E-07-02(1) 2LBS - 6IN X 6IN X 4IN

[MELLES GRIOT 07 GON 503] GONIOMETER TRANSLATION STAGE 40X40MM +/-20 X 12 ARCMIN - MANUFACTURER: MELLES GRIOT MODEL: 07 GON 503 CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THIS GONIOMETER IS IN FAIR COSMETIC CONDITION WITH MINOR SCUFFS FROM PRIOR USE AND LIGHT OIL/GREASE RESIDUES IN THE DOVETAIL AREA. THE UNIT YOU RECEIVE MAY HAVE THE OXIDE COATING SCUFFED OFF A CORNER OR TWO AS SHOWN. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: THIS GONIOMETER IS IN GOOD WORKING CONDITION. LIGHT FINGERTIP PRESSURE ON THE KNOB MOVES THE STAGE BOTH WAYS EASILY AND SMOOTHLY. THE STAGE YOU RECEIVE MAY HAVE JUST A FEW DEGREES OF BACKLASH BEFORE TURNING THE KNOB "THE OTHER WAY" RESULTS IN MOTION. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) MELLES GRIOT 07 GON 503 GONIOMETER SPECIFICATIONS: MANUFACTURER: MELLES GRIOT P/N: 07 GON 503 GOH-SERIES GONIOMETER GONIOMETRIC TRANSLATION STAGE SMALL: 40 MM X 40 MM SQUARE, 20MM HIGH ANGULAR ADJUSTMENT RANGE: +/-20O ANGULAR RESOLUTION: 12 ARC MINUTES LOAD CAPACITY: 3KG ROTATION AXIS: 15MM ABOVE STAGE CENTER ADJUSTS WITH KNOB ON END LOCKS WITH KNOB ON SIDE BRASS CONSTRUCTION WITH BLACK OXIDE FINISH PRELOADED DOVETAIL BEARING PRECISION LEADSCREW FOR SMOOTH STABLE MOTION ALLOWS PARTIAL ROTATION (TILT) OF MOUNTED COMPONENTS TILT ABOUT AN AXIS AT A FIXED HEIGHT ABOVE THE SURFACE CAN STACK AS A PAIR TO ROTATE AROUND A POINT WHERE THE AXES INTERSECT THREADED HOLES ON TOP FOR SIMPLE MOUNTING (M2, M4, AND M6) CLEARANCE MOUNTING HOLES ON BOTTOM SKU: X45D011 2O-08-02(2) 2LBS - 6IN X 6IN X 4IN

[ANALTECH 47531 UNIPLATE SILICA GEL HLF PLATES] MANUFACTURER: ANALTECH MODEL: 47531 CONDITION: NEW OTHER. COMES NEW AND REPACKAGED IN ORIGINAL OPEN-BOX PACKAGING. PLEASE NOTE THAT THERE ARE ONLY 20 PLATES IN THIS BOX WHICH ORIGINALLY HAD 25. 5 OF THE PLATES HAVE BEEN REMOVED LEAVING 20 UNUSED PLATES. THERE ARE 4-PKS WITH 5 PLATES EACH. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (20) ANALTECH 47531 UNIPLATE SILICA GEL HLF PLATES SPECIFICATIONS: MANUFACTURER: ANALTECH MODEL: 47531 DESCRIPTION: UNIPLATE SILICA GEL HLF PLATES SIZE: 5 X 20 CM SCORED TO: 2.5 X 5 CM THICKNESS: 250UM FLUORESCENT INDICATOR: UV254 SILICA PORE: 60A 4-PKS OF 5 PLATES SKU: Y05U012 1B-20-04(1) 6LBS - 12IN X 12IN X 6IN

[VAS ENGINEERING DORIC 610 SERIES DIGITAL INDICATOR 1 THERMOCOUPLE] MANUFACTURER: VAS ENGINEERING MODEL: 610 CONDITION: FOR PARTS OR NOT WORKING. COMES IN NON ORIGINAL PACKAGING. THE PANEL METER IS IN USED CONDITION WITH SCUFFS AND SCRATCHES FROM PRIOR INSTALLATION. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THE INDICATOR WAS REMOVED FROM A DECOMMISSIONED ENVIRONMENT. THE UNIT IS MISSING THE BACK PANEL AND WE ARE UNABLE TO TEST SO THE UNIT IS BEING SOLD AS/IS FOR PARTS OR REPAIR. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) VAS ENGINEERING DORIC 610 SERIES DIGITAL PANEL INDICATOR 1 THERMOCOUPLE 90-132 VAC SPECIFICATIONS: MANUFACTURER: VAS ENGINEERING MODEL: DORIC 610 DIGITAL PANEL INDICATOR REPEATABILITY: +/- 1 VOLTAGE: 90-132 VAC FREQUENCY: 48/400 HZ OVERLOAD PROTECTION: POWER LEAD TO GROUND: 1500 VDC OR VAC RMS, INPUT TO GROUND: 270 VDC OR VAC RMS INPUT IMPEDANCE: THERMOCOUPLES-22M OHM WITH 20NA OF BREAK DETECT CURRENT DISPLAY: 8 DIGITS, 14 SEGMENT ALPHANUMERIC RED LEDS LINEARIZATION, TEMPERATURE INPUTS: 100% DIGITAL, USING VARIABLE LENGTH, SECOND ORDER, POLYNOMIAL SEGMENTS PROGRAM STORAGE: EEROM CASE CONSTRUCTION: METAL, BLACK ANODIZED, EXTRUDED ALUMINUM RELIABILITY: 40000 HOURS MTBF

HAKKO T7/T15-1209 SOLDERING TIP FOR FM-202/FP-102 TIP SHAPE: QUAD SIZE: 8.4 X 8.4 FOR IRONS: HAKKO FM-203-HANDPIECE : HAKKO FM-2027(70W) HAKKO FM-204-HANDPIECE : HAKKO FM-2027(70W) HAKKO FX-950-HANDPIECE : HAKKO FM-2028(70W) HAKKO FX-951-HANDPIECE : HAKKO FM-2028(70W) HAKKO FX-952-HANDPIECE : HAKKO FM-2028(70W) HAKKO FM-202-HANDPIECE : HAKKO FM-2021(70W) OR HANDPIECE : HAKKO FM-2027(70W) NOTE: THE T15 TIPS HAVE REPLACED THE T7 TIPS. THE ONLY DIFFERENCE IS HAKKO HAS PHASED OUT THE BARCODE FROM THE TIPS. SEE THE HAKKO PRODUCT BULLETIN. SKU: EBK39E005

[SCIENTIFIC ATLANTA] DS3 BERTS AT9300 TEST SET PORTABLE TRANSMITTER RECEIVER S/N: Q12L007 1D-10-01(1) - MANUFACTURER: SCIENTIFIC ATLANTA MODEL: AT9300 DS3 BERTS PORTABLE PRINTER INTERFACE TRANSMITTER SELECT: ERROR PATTERN FRAME RECEIVER SELECT: TIME RESULTS STATUS: INPUT FRAME TEST. COMES IN NON-ORIGINAL PACKAGING. IT HAS SCUFFS AND SCRATCHES FROM NORMAL USE. WHEN POWER WAS APPLIED IT INITIALIZED, LOADED DEFAULTS AND IS READY TO GO. NO FURTHER TESTING WAS PERFORMED. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. SPECIFICATIONS: MANUFACTURER: SCIENTIFIC ATLANTA MODEL: AT9300 DS3 BERTS PORTABLE PRINTER INTERFACE TRANSMITTER SELECT: ERROR PATTERN FRAME RECEIVER SELECT: TIME RESULTS STATUS: INPUT FRAME TEST. 20LBS - 18IN X 12IN X 12IN

[UNBRANDED] CLEAN ROOM WALL MOUNT PASS THROUGH STORAGE BOX THRU CHAMBER CABINET CHAMBER. CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THIS BOX HAS MINOR SCUFFS FROM PREVIOUS USE. THE GLASS IS SCRATCHED IN ONE OF THE CORNERS. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THE DOORS OPEN AND CLOSE. NO FURTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) CLEAN ROOM WALL MOUNT PASS THROUGH STORAGE BOX SPECIFICATIONS: MANUFACTURER: UNKNOWN MODEL: UNKNOWN OVERALL DIMENSIONS: WIDTH: 36" HEIGHT: 36" DEPTH: 25-3/8" INSIDE DIMENSIONS: WIDTH: 33" HEIGHT: 33-3/4" DEPTH: 24-1/8" SKU: W39O010

[HP 8657B RF SIGNAL GENERATOR 100KHZ-2060MHZ +13DBM-143DBM 001 KINDA WORKS-PARTS] - MANUFACTURER: HEWLETT PACKARD HP MODEL: 8657B CONDITION: FOR PARTS OR NOT WORKING. COMES IN NON-ORIGINAL PACKAGING. THIS UNIT IS IN FAIR COSMETIC CONDITION WITH LOTS OF MINOR SCUFFS/SCRATCHES/RESIDUES FROM PRIOR USE. THE FEET AND ONE OF THE CARRY HANDLES ARE MISSING. THE PLASTIC TABS THAT COVER THE SCREWS TO HOLD THE HANDLE ARE MISSING ALSO. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS GENERATOR IS IN PARTIAL WORKING CONDITION. WE WERE ABLE TO VERIFY OUTPUT FROM 10KHZ (THE LIMIT OF THE GENERATOR) TO 1.3GHZ (THE LIMIT OF OUR COUNTER). THE KEYBOARD RESPONDS TO INPUTS, AND THE DISPLAYS ARE CLEAR AND BRIGHT. AT HIGH OUTPUT AMPLITUDES (ESPECIALLY >10DBM) THE WAVEFORMS FALL APART AT LOW FREQUENCIES. THE SINE STARTS TO SQUISH ON TOP BY 4MHZ, AND BY 1MHZ THERE IS A DISTINCT SHOULDER ON TOP. BY 100KHZ THE SINE WAVE IS MORE OF A RAMP, AND AT 10KHZ IT IS BOTH VERY BADLY DISTORTED, AND THE OUTPUT FALLS AWAY TO ALMOST NO AMPLITUDE. THE DISTORTION GOES AWAY AT LOWER AMPLITUDES. THIS UNIT CAN DO BOTH FM AND AM MODULATION, BUT AGAIN THESE ARE BADLY DISTORTED AT LOW FREUQUENY/HIGH AMPLITUDES. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) HP 8657B SIGNAL GENERATOR SPECIFICATIONS: MANUFACTURER: HEWLETT PACKARD MODEL 8657B SIGNAL GENERATOR RANGE: 100KHZ TO 1.04GHZ WIDE DYNAMIC RANGE: +13 TO -143.5DBM WITH PROGRAMMABLE AM AND FM MODULATION ABILITIES FULL HP-IB (IEEE-488) PROGRAMMABILITY LOW RESIDUAL FM OPTIONS MARKED AS INSTALLED: OPTION 001 HIGH STABILITY TIMEBASE OPTION 003 PULSE MODULATION SKU: Y36D019 1D-01-01(1) 47LBS - 36IN X 25IN X 12IN

LAERDAL 350-00150 URINARY / ANAL VALVES (14) URINARY / ANAL VALVES AND CLAMPS TO BE USED WITH PEDIATRIC MANIKINS FOR URINARY CATHETERIZATION AND ENEMA ADMINISTRATION FEATURES VALVE CONNECTORS ATTACH GENITALIA TO THE ABDOMINAL PLATE, WHICH SERVES AS A FLUID RESERVOIR FOR URINARY CATHETERIZATION, AND TO THE COLON RESERVOIR FOR ENEMA ADMINISTRATION

[B.F. WEHMER MIXER] 1/3-HP W/ VACUUM DENTAL ORTHODONTIC. MANUFACTURER: B.F. WEHMER. MODEL: DOES NOT APPLY. CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. IT HAS SCUFFS AND SCRATCHES FROM NORMAL USE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: WHEN POWER WAS APPLIED, THIS ITEM RAN VERY SMOOTHLY. IT WAS NOT TESTED UNDER A LOAD. NO FURTHER TESTING WAS PERFORMED. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) B.F. WEHMER MIXER SPECIFICATIONS: MANUFACTURER: B.F. WEHMER MODEL: DOES NOT APPLY TABLE BASE DIMENSIONS: 9"D X 9-1/4"W DISTANCE BETWEEN TABLE BASE AND MOTOR SHAFT: 7-3/4" GE MOTOR: 1/3 HP 60 HZ SINGLE PHASE 1725 RPM FR: 48Y 115V 6.4 AMPS SKU: S47L012 2B-04-04(1) 34LBS - 25IN X 19IN X 14IN

[NEW] KENTEK E9716 KENTEK LASER 5.5 ARC LENGTH STROBE FLASH TUBE 100-26 SPECIFICATIONS: MANUFACTURER: KENTEK MODEL: 100-26 5.5 ARC LENGTH LASER FLASHLAMP SKU: W03G006 1D-16-04(17) 2LBS - 16IN X 8IN X 4IN